Sharp | LC-32HI5012KF | Quick Start Guide | Sharp LC-32HI5012KF Smart LED TV Quick start guide

Sharp LC-32HI5012KF Smart LED TV Quick start guide
LC-32HI5012KF SHA-QSW-0063.indd 1
4x
1 x L (left)
1 x Mini YPbPr Cable
ble
1 x R (right)
1 x Stand installation pack
What is included in the box
Harman Kardon is trademark of HARMAN International Industries, Incorporated,
registered in the United States and/or other countries.
VESA 200 x 100 (mm)
4.8
740W x 491H x 180D
AC 220V ~ 240V; 50Hz
31/45/70W (home mode/standard/max)
(<0.5W in Standby)
LC-32HI5012KF
VESA 200 x 200 (mm)
7.4
929W x 601H x 203D
LC-40FI5012KF
75 ohm Antenna / Analog / DVB / Satellite
3 x HDMI, 2 x USB, 1 x Mini-SCART,
1 x RJ45 LAN/Ethernet, 1 x Mini Component/YPbPr,
1 x Mini AV IN - Composite Video/CVBS and L/R Audio shared for Composite Video
and Component/YPbPr
1 x Digital Optical Audio output, 1 x 3.5mm Headphone
2 x 10 / 2 x 8
AC 220V ~ 240V; 50Hz
45/65/80W (home mode/standard/max)
(<0.5W in Standby)
*Built-in Harman Kardon speaker systems (Full-range speaker and tweeter).
Wall Mounting
Net weight (Kgs)
Dimensions
including stand
(mm)
Voltage and power
consumption
Speaker* /
Amplifier Watts
(RMS)
Sound Outputs
Inputs
Screen resolution
Off mode power consumption
Standby power consumption *2
Annual energy consumption *1
On-mode power consumption
Visible screen size (diagonal)
Energy efficiency class
<0.50 W
<0.50 W
1920 (H) x 1080 (V)
66 kWh
45 kWh
1366 (H) x 768 (V)
45.0 W
31.0 W
n/a
102 cm / 40 inches
81 cm / 32 inches
LC-40FI5012KF
A+
LC-32HI5012KF
A+
n/a
*1: Energy consumption XYZ kWh per year, based on the power consumption of the television operating 4
hours per day for 365 days. The actual energy consumption will depend on how the television is used.
*2: When the TV is turned off with the remote control/standby button and no function is active.
Additional Technical Information
RF
Accessories
Included with this TV are the following accessories
1 x Quick start guide
1 x TV
1 x Remote Control and 2 x AAA Batteries
1 x Power Cable
1 x Mini/Composite/AV Cable
Model ID
3
1 x Mini SCART
Additional Accessories
Should you wish to connect older/analogue devices to your television, you can purchase the necessary
cables either from your retailer or at www.umc-uk.co.uk/cables
1 x RF Cable
USB Memory sticks for recording from Freeview TV
Your TV has a built in Personal Video Recording function, meaning you can set
up recordings from the TV guide directly onto a PVR ready USB memory stick.
You can also pause live TV and rewind/fast forward through your recordings.
See our great range of tested and compatible PVR ready USB memory sticks at
www.umc-uk.co.uk/usb
Connecting Component/YPbPr - you will need both the Mini YPbPr Cable and the Mini Composite/AV Cable.
The YPbPr cable will be used exclusively for video (red/green/blue) and the AV cable will be used for audio (Red/White while
Yellow stays unconnected).
Connecting Composite/AV - Mini Composite/AV Cable will be enough for both video and sound.
Sharp
2
6
EXI T
FAV
TV
APP S
Soundbar
Terms and conditions apply. Online registration only.
ly.
Win a
10/01/2019 15:50:05
SHA/QSW/0063
www.registertoday.co.uk/sharp
p and enter into a prize draw to
Register your manufacturers guarantee online within 14 days of purchase at
Quick Start Set Up Guide
For information on using the TV’s features, please refer to the operating Instructions.
Model Numbers
LC-32HI5012KF
LC-40FI5012KF
Quick & easy guide for setting up your TV
What is included in the box
Using the remote control
Setting up the TV for the first time - including attaching the stand
Connecting other devices to the Television
Need help setting up or using your TV?
Please contact the UK & ROI Helpline*
Telephone UK 0330 024 0803 or ROI 01443 3323
Online support at: www.umc-uk.co.uk
Email support at: service@umc-uk.co.uk
*Calls to 0330 numbers are charged at standard call rates and are included as part of any bundled minutes with your
phone provider.
Calls to the ROI number are charged at the local call rate.
The telephone opening hours are Monday to Friday 8.30am to 6pm, Saturday 9am – 5pm.
Bank Holidays - 10am to 4pm
Closed Christmas and New Years day
REPE AT
Trademark
1
5
9
Freeview Play
4
8
ON/OFF
7
TV
GUIDE
PICTURE
SOUND
SUBTITLE
OK
SOURCE
TEXT
CH
0
VOL
MEN U
BAC K
INFO
ANGLE
PVR/MEDIA
A-B
Product fiche
1
2
3
4
GOT O
REC LIST
Freeview Play brings together live TV viewing with ‘‘catch up’’
TV services such as BBC iPlayer, ITV player, More4 and Demand
5. The Freeview Play Explore app features a carousel of genres
to select from when searching for programmes, such as sport,
comedy, dramas and soaps, etc. Content is made up from
recommendations of the major broadcasters and offers an
alternative means of searching.
Note that to use the full functionality of Freeview Play your set
must be connected to the internet.
Technical Specification
VOL (+/-) - To increase/decrease the sound level.
PICTURE - Scrolls through picture mode options.
SOUND- Scrolls through sound mode options.
SOURCE - To display the input/source menu.
CH (+/-) - To increase or decrease the channel being watched.
MENU - To display OSD menu.
EXIT - To exit all menus.
( / / / / OK) - Allows you to navigate the on-screen menus and adjust
the system settings to your preference.
BACK - To go back a previous step.
FAV - To display favourites menu.
NUMBER BUTTONS - 0–9 to select a TV channel directly.
MUTE - Mute the sound or vice versa.
TV GUIDE - Opens the 7 day TV guide (digital TV mode).
STANDBY - Switch on the TV when in standby or vice versa.
FREEVIEW PLAY - Access the Freeview Play app.
For models with integrated DVD players.
For models with PVR Function.
For models with USB Playback.
For models with 3D functions.
Using the remote control
Key
1
2
3
4
INFO - Press once for now/next channel information.
- Press twice for information about the current programme.
TEXT - To enter/exit Text.
SUBTITLE - To switch the dialogue at the bottom of the screen (on/off).
TV - To switch to Digital Channels.
YOUTUBE - Access the Youtube App.
NETFLIX - Access the Netflix App.
APPS - Access the APPS menu.
RECORD - Access the USB record function.
REC LIST - Opens the list of previously recorded items.
- To restart the current chapter
- To advance forward to the next chapter
- To stop the playback/Eject Disc
(To EJECT the disc press/hold the
button for 4 seconds)
- To play in fast rewind mode
- To play in fast forward mode
- To play/pause
GOTO - To go to a specific chapter.
A-B - Press once to set point, press a second time to return to point.
ANGLE - Select different angle of DVD.
REPEAT - To repeat playback.
To receive Freeview channels, in particular Freeview HD
channels, you will need a Digital TV aerial and be in a
good Freeview coverage area.
You can check coverage for your postcode
at www.freeview.co.uk.
Please note that any Freeview HD channels found during
tuning will be placed in channel positions above 100. For
example, 101 (BBC1 HD) 102 (BBC2 HD) etc.
Please save your box/packaging as you will need this in the event of warranty/service repair or support.
We are unable to carry out warranty/service if you are unable to package it correctly. The safest way to
package your item in the event of warranty/service repair is in it’s original box/packaging.
Setting up the TV set for the first time
1 Fitting the stand
TV panel must be facing downwards.
3
4
For the stand installation, there is one type of screw
provided as shown below.
To complete the stand installation you will require a
cross head screw driver.
Place the TV set on a flat and clean surface with the
panel facing downwards to avoid damage.
1
2
Front/Longest
L
2
Place the TV set on a flat and clean surface with the
panel facing downwards to avoid damage, then fix
the stand feet shown.
The feet are marked L (left) and R (right).
Used for attaching the stand
to the TV set (fig.2)
R
Back/Shortest
R
1
4x
To obtain a copy of your Operating Instructions, please go to: www.umc-uk.co.uk/instruction-manuals/sharp
3
When the stand feet are installed correctly the
stand feet will be longest at the front of the TV
and shortest at the back with the feet pointing
away from each other.
L
Register your manufacturers
guarantee online within
14 days of purchase at
www.registertoday.co.uk/sharp
and enter into a prize draw to
win a Sharp Soundbar
4x
Secure the stand feet to the underside of the TV
set using the 4 screws provided.
Terms and conditions apply. Online registration only.
2 Connecting your set
Sky remote code
3 Powering On the TV
TV Control Stick
Remote Control: Installing Batteries
Outdoor Digital
TV Aerial
1.
2.
1) Connect the TV to your power socket.
2) If you wish to use the TV to receive Freeview/Saorview channels,
connect the RF input from the TV to your outdoor Digital TV aerial.
If you do not wish to receive Freeview/Saorview, skip this step.
TV control stick
Switch on the television by pressing
the TV control stick located on the
TV set.
If you wish to use your Sky remote to operate the TV’s basic
functions, you will need a Sky remote control (Revision 9 or
later) and you will need to program it with the code 2134. If
you wish to use your Sky Q remote to operate the TV’s basic
functions, you will need to program it with the code 4170.
Insert the batteries supplied into the
remote control and press the standby
button to power on the TV.
4 First time installation
Connectivity
CI CARD IN
EARPHONE
AV IN
YPbPr IN
M
K
J
3
1. Languages
2. Country Selection
3. Network setup You can connect the TV to your broadband router or wire-
Select your preferred on screen display language. This will change the language in
which the menus and associated information is displayed in. When set up has been
completed, this can be changed by selecting Menu > Settings > Language
Select the correct flag for the country in which the set will be used in. This will enable
the set to correctly install the functions applicable in the country of use.
less network in order to take advantage of the Smart functions. If you connect the
TV to your router using an Ethernet cable (recommended) this step will be skipped.
Follow the on screen prompts to connect to your wireless network. You can set up
the Network connection later in the network menu.
USB (2.0)
2
5V
500mA MAX
1
L
I
H
S AT IN
A
4
5
6
4. Environment of Use
5. TV Installation – Audio.
6. Default Source
Home Mode: For normal use, by default it is set to a power saving mode which reduces the energy used by up to 25% (by reducing the power to the LED/LCD panel).
This can be changed in the picture mode settings.
Depending on how you use / install your TV, select the appropriate setting. The sound
settings on the TV will adjust to suit the type of installation.
Select the source which you use the most. If Digital TV (Freeview) is chosen, then at
the next step, the set will tune in and default to Digital TV (Freeview). If one of the
other sources is selected, then the set will not tune in at this stage and default to
that input. If it is required to tune the set in later, this can be achieved by selecting
Menu > Channels
NOTE: In Home Mode, the TV will switch itself to the standby mode after 4 hours in
the event that the buttons on the remote control or TV set are not used.
B
C
A
Ethernet/LAN*
Network Connection
B
HDMI 1
C
HDMI 2 (ARC)
D
D
E
F
G
H
HDMI 3
HDMI input
HDMI input
I
2 x USB
USB port
HDMI input
J
Earphone
Earphone output
mini SCART
SCART input
K
AV IN
Audio/Video input
E
SAT IN
Satellte input
L
YPbpr
HD Input (YPbpr)
F
RF IN
RF/TV input
M
CI CARD IN
Common Interface module
G
Optical Digital Audio
Digital Audio output
* The Ethernet/LAN port is used for Freeview HD services and smart functions.
Store Mode: For store display use. The picture is adjusted to optimum settings. The
store demonstration will appear on the screen automatically after two minutes.
LC-32HI5012KF SHA-QSW-0063.indd 2
10/01/2019 15:50:13
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising