Sharp | B49CU8462KSR01 | Instruction manual | Sharp LC-49CUF8462KS ULTRA HD 4K Smart D-LED TV with exceptional picture quality and unique sound system by harman/kardon®. Instruction Manual

Sharp LC-49CUF8462KS ULTRA HD 4K Smart D-LED TV with exceptional picture quality and unique sound system by harman/kardon®. Instruction Manual
User manual
models:
LC-43CUF8462ES
LC-49CUF8462ES
LC-55CUF8462ES
LC-43CUF8462KS
LC-49CUF8462KS
LC-55CUF8462KS
2
1
4
3
5
6
7
9
8
10
12
15
11
14
16
13
17
18
20
19
22
26
23
21
24
25
28
29
27
EN

Important safety instructions
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Please, read these safety instructions and respect
the following warnings before the appliance is
operated:
In order to prevent fire always
keep candles and other open
flames away from this product.
• Television sets with 43”size screens or more must be lifted and carried by
at least two people.
• This TV does not contain any parts which could be repaired by the user.
In case of a fault, contact the manufacturer or the authorised service
agent. Contact with certain parts inside the TV might endanger your life.
The guarantee does not extend to faults caused by repairs carried out by
unauthorized third parties.
• Do not remove the rear part of the appliance.
• This appliance is designed for the receiving and reproduction of video
and sound signals. Any other use is strictly forbidden.
• Do not expose the TV to dripping or splashing liquid.
• To disconnect the TV from mains please unplug the mains plug from the
mains socket.
• If the supply cord is damaged, it must be replaced by the manufacturer,
a service agent or similarly qualified persons in order to avoid a hazard.
• The ideal distance to watch TV is approximately five times longer than
the diagonal of the screen. Reflections on the screen from other light
sources can make the quality of the picture worse.
• Ensure the TV has sufficient ventilation and is not close to other appliances and other pieces of furniture.
• Install the product at least 5 cm from the wall for ventilation.
• Ensure that the ventilation openings are clear of items such as newspapers, table-cloths, curtains, etc.
• The TV set is designed to be used in a moderate climate.
• The TV set is designed exclusively for operation in a dry place. When
using the TV outside, please, make sure it is protected against moisture
(rain, splashing water). Never expose to moisture.
• Do not place any objects, containers filled with liquids, such as vases,
etc. on the TV. These containers might get pushed over, which would
endanger electric safety. Place the TV exclusively on flat and stable
surfaces. Do not place any objects such as newspaper or blankets, etc.
on or under the TV.
• Make sure the appliance does not stand on any power cables as they
might get damaged. Mobile phones and other devices such as WLAN
adapters, monitoring cameras with wireless signal transmission, etc.
might cause electromagnetic interference and they should not be
placed near the appliance.
• Do not place the appliance near heating elements or in a place with
direct sunlight as it has a negative effect on cooling of the appliance.
Heat storage is dangerous and it can seriously reduce the lifetime of the
appliance. In order to ensure the safety, ask a qualified person to remove
the dirt from the appliance.
• Try to prevent damage to the mains cable or mains adapter. The appliance can only be connected with the supplied mains cable/ adapter.
• Storms are dangerous for all electric appliances. If the mains or aerial
wiring is struck by lightening the appliance might get damaged, even if
it is turned off. You should disconnect all the cables and connectors of
the appliance before a storm.
• To clean the screen of the appliance use only a damp and soft cloth. Use
only clean water, never detergents and in no case use solvents.
• Position the TV close to the wall to avoid the possibility of it falling when
pushed.
• WARNING - Never place a television set in an unstable location. A television set may fall, causing serious personal injury or death. Many injuries,
particularly to children, can be avoided by taking simple precautions
such as:
• Use cabinets or stands recommended by the manufacturer of the
television set.
• Only use furniture that can safely support the television set.
• Ensure the television set is not overhanging the edge of the supporting
furniture.
• Not place the television set on tall furniture (for example, cupboards or
bookcases) without anchoring both the furniture and the television set
to a suitable support.
• Not place the television set on cloth or other materials that may be
located between the television set and supporting furniture.
• Educate children about the dangers of climbing on furniture to reach the
television set or its controls.
• Ensure that children do not climb or hang onto the TV.
• If your existing television set is being retained and relocated, the same
considerations as above should be applied.
• The instructions shown below are a safer way to set up the TV, by fixing it
to the wall and will avoid the possibility of it falling forwards and causing
injury and damage.
• For this type of installation you will need a fastening cord
A) Using one/both of the top wall-mounting holes and screws (the
screws are already supplied in the wall mounting holes) fasten one end
of the fastening chord/s to the TV.
B) Secure the other end of the fastening chord/s to your wall.
• The software on your TV and the OSD layout can be changed without
notice.
Warning:
• Never connect any external devices to a live appliance. Switch off not
only the TV but also the devices which are being connected! Plug the
TV plug into the wall socket after connecting any external devices and
the aerial!
• Always make sure there is free access to the TV mains plug.
• The appliance is not designed for a use in a workplace fitted with
monitors.
• The systematic use of headphones at high volume might lead to irreversible hearing damage.
• Ensure environmental disposal of this appliance and any components
including batteries. When in doubt, please, contact your local authority
for details of recycling.
• While installing the appliance, do not forget that furniture surfaces are
treated with various varnishes, plastics, etc. or they might be polished.
The chemicals contained in these products might have a reaction with
the TV stand. This could result in bits of the material sticking to the furniture surface, which are difficult to remove, if not impossible.
• The screen of your TV has been produced under top quality conditions
and was checked in detail for faulty pixels several times. Due to the technological properties of the manufacturing process, it is not possible to
eliminate the existence of a small number of faulty points on the screen
(even with maximum care while in production). These faulty pixels are
not considered faults in terms of guarantee conditions, if their extent is
not greater than the boundaries defined by DIN norm.
• The manufacturer cannot be held responsible, or be liable, for customer
service-related issues related to the third party content or services. Any
questions, comments or service-related inquiries relating to the third
5
•
•
•
•
party content or service should be made directly to the applicable
content or service provider.
There are a variety of reasons you may be unable to access content or
services from the device unrelated to the device itself, including, but not
limited to, power failure, the Internet connection, or failure to configure
your device correctly. Universal Media Corporation, its directors, officers,
employees, agents, contractors and affiliates shall not be liable to you
or any third party with respect to such failures or maintenance outages,
regardless of cause or whether or not it could have been avoided.
All third party content or services accessible via this device is provided to
you on an “as-is” and “as available” basis and Universal Media Corporation
and its affiliates make no warranty or representation of any kind to you,
either express or implied, including, without limitation, any warranties
of merchantability, non-infringement, fitness for a particular purpose
or any warranties of suitability, availability, accuracy, completeness, security, title, usefulness, lack of negligence or error-free or uninterrupted
operation or use of the content or services provided to you or that the
content or services will meet your requirements or expectations.
‘Universal Media Corporation’ is not an agent of and assumes no
responsibility for the acts or omissions of third party content or service
providers, nor any aspect of the content or service related to such third
party providers.
In no event will ‘Universal Media Corporation’ and/or its affiliates be
liable to you or any third party for any direct, indirect, special, incidental,
punitive, consequential or other damages, whether the theory of liability
is based on contract, tort, negligence, breach of warranty, strict liability
or otherwise and whether or not Universal Media Corporation and/or its
affiliates have been advised of the possibility of such damages.
Important information regarding use of video
games, computers, captions and other fixed image
displays.
• The extended use of fixed image program material can cause a permanent “shadow image “ on the LCD screen (this is sometimes incorrectly
referred to as “burnout to the screen“). This shadow image is then permanently visible on the screen in the background. It is irreversible damage.
You can avoid such a damage by following instructions below:
• Reduce the brightness/contrast setting to a minimum viewing level.
• Do not display the fixed image for a long period of time. Avoid displaying of:
» Teletext time and charts,
» TV/DVD menu, e.g. DVD contents,
» In the„Pause“ mode (hold): Do not use this mode for a long time,
e.g. while watching a DVD or a video.
» Turn off the appliance if you are not using it.
Batteries
• Observe the correct polarity when inserting the batteries.
• Do not expose batteries to high temperatures and
do not place them on locations where the temperature might increase quickly, e.g. near the fire or on
the direct sunshine.
• Do not expose batteries to excessive radiant heat,
do not throw them into the fire, do not disassemble
them and do not try to recharge un-rechargeable
Cd
batteries. They could leak or explode.
» Never use different batteries together or mix
new and old ones.
» Dispose of batteries in an environmentally friendly way.
» Most of the EU countries regulate the disposal of batteries by law.
Disposal
• Do not dispose of this TV as unsorted municipal waste.
Return it to a designated collection point for the recycling
of WEEE. By doing so, you will help to conserve resources
and protect the environment. Contact your retailer or local
authorities for more information.
CE Statement:
• Hereby, Universal Media Corporation s.r.o. declares that this LED TV
is in compliance with the essential requirements and other relevant
provisions of R&TTE Directive 1999/5/EC. http://www.sharp.eu/av/
documents-of-conformity

Trademarks
• The terms HDMI and HDMI High-Definition Multimedia Interface,
and the HDMI Logo are trademarks or registered trademarks of HDMI
Licensing, LLC in the United States and other countries.
• The “HD TV” Logo is a trademark of DIGITALEUROPE.
• The “HD TV 1080p” Logo is a trademark of DIGITALEUROPE.
• The DVB logo is the registered trademark of the Digital Video Broadcasting - DVB - project.
• Manufactured under license from Dolby Laboratories. Dolby, Dolby
Audio and the double-D symbol are trademarks of Dolby Laboratories.
• For DTS patents, see http://patents.dts.com. Manufactured under
license from DTS Licensing Limited. DTS, the Symbol, & DTS and the
Symbol together are registered trademarks, DTS TruSurround and
DTS 2.0+Digital Out are trademarks of DTS, Inc. © DTS, Inc. All Rights
Reserved.
• YouTube and the YouTube logo are trademarks of Google Inc
• The Wi-Fi CERTIFIED Logo is a certification mark of the Wi-Fi Alliance.
• Wi-Fi CERTIFIED Miracast and Miracast are trademarks of Wi-Fi Alliance
• DLNA, the DLNA Logo and DLNA CERTIFIED are trademarks, service
marks, or certification marks of the Digital Living Network Alliance.
• MHL and the MHL logo are a trademark, registered trademark or
service mark of MHL, LLC in the United States and /or other countries.
• The Bluetooth word mark and logos are registered trademarks owned
by Bluetooth SIG,. Inc.
EN

What is included in the box
9.
Supply of this TV includes following parts:
•
1x TV
•
1x RF cable
•
1x Remote control
•
1x TV stand installation packet
& screw set for wallmount
•
2x AAA batteries
•
1x User guide
•
1x Mini Component adapter
cable
•
1x Mini Composite adapter
cable
•
1x Mini SCART adapter cable

Attaching the Stand
Please follow the instructions on last page of this user manual.

Wall mounting
Install the wall mounting bracket to the television as advised
by the bracket manufacturer.

Getting started - initial set up
1.
Insert the batteries supplied into the Remote control.
2.
Using the RF cable supplied, connect the TV to the TV Aerial wall
socket.
3.
For connecting to the Internet with a wired connection connect a
Cat 5/Ethernet cable (not included) from the TV to your broadband
modem/router. If you wish to connect to internet via Wi-Fi, please
follow instruction in electronic INSTALLATION GUIDE (point 7, STEP2
bellow).
4.
Connect the power cable to the Electrical outlet. You will be now
welcomed with the First Time Installation screen.
5.
If it does not appear, press and hold TV control stick on TV back cover until
special menu appears. Choose option Pair Again. Please press and hold
the blue and yellow buttons for a few seconds on the remote control,
until white LED on TV front blinked five times. Press [MENU] then 8-88-8 and the First Time Installation screen will appear.
If you wish to make changes to any of the default settings, use the
scroll ▲/▼/◄/► buttons. To exit this menu at anytime, press [EXIT]
button.
6.
7.
Please set desired settings in INSTALLATION GUIDE.
STEP 1 - Set the TV Menu language.
STEP 2 - Set type of network connection. If you wish to skip this step
and connect TV to network later, please choose Skip Network Setting
STEP 3 - Select the location of TV. For home use, please select Home.
For shop demonstration mode, set Store.
STEP 4 - Choose Digital TV tuning options:
DVB Antenna - You can choose between Terrestrial (DVB-T), Cable
(DVB-C) or Satellite (DVB-S).
Tunning Mode - Choose if you want to tune only Digital (DTV)
Analogue (ATV) or both Digital and Analogue (DTV + ATV)
Country - Set the desired country.
Operator - Select Cable provider. If your cable operator is not listed
select Others. (Avaliable only if DVB Antenna is set to CABLE)
8.
Choose [Auto Start] item and press [OK] button to start the tuning
process.
Optional channel presets DVB-C:
Keep all default settings as recommended.
If DVB-C channels are not found, contact your network provider for the
valid "Network ID". Then perform a new search. Press the [MENU], select
"Network ID" and enter the network ID.
Choose [Auto Tuning] item and press [OK] button to start the
tuning process.
10. Optional channel presets DVB-S2: Select "Satellite" in the "DVB
Antenna" in the menu for the optional channel presets. Here you can
choose between the various satellites. Since selection completed, then
the channel list of the exact satellite will be available to be imported
into your TV system.
Confirm with [OK] button on the remote control, to start scanning.
TIP: If you are missing channels, the reason for this is likely to be signal
strength, you should consider connecting signal booster and re-tuning the TV.

Remote control
Radio controlled remote control - No more aiming in the TV direction!
Refer to remote control picture on the second page of this user
manual.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
STANDBY – Switch on TV when in standby or vice versa.
NET+ – Displays AQUOS NET+ menu.
MUTE – Mute the sound or vice versa.
0 – 9 – to select a TV channel directly.
YouTube – Displays YouTube application.
SMART – Displays SMART MEDIA menu.
SOURCE – To display the input/source menu.
TV GUIDE – Opens the 7 Day TV Guide (Digital mode).
– To return to the previous channel viewed.
DTV – Switch to digital TV source.
VOL ▲/▼ – To increase / decrease the sound level.
FAV – To display favourites menu.
INFO – Press once for now/next channel information. Press twice for
programme information about current programme.
14. CH ▲/▼ – To increase or decrease the channel being watched.
15. SUBTITLE – To switch the dialogue at the bottom of the screen (on/off ).
16. TELETEXT – Teletext mode - To enter Teletext
17. MENU – To display OSD menu.
18. BACK – Back to previous menu.
19. EXIT – To exit all menus.
20. (▲/▼/◄/►/ OK) – Allows you to navigate the on-screen menus and
adjust the system settings to your preference. Press▲ to change
picture mode during watching TV. Press ▼ to change sound mode
during watching TV.
21.
– To play in fast rewind mode.
22.
– To play in fast forward mode.
23.
– To play/pause
24. Rec1 – PVR Record
25.
– To restart the current chapter
26.
– To advance forward to the next chapter
27.
– To stop the playback
28. Rec List1– Opens the list of recordings.
29. COLOUR BUTTONS – Additional teletext and OSD functions
1
- available only with PVR function
7

TV buttons & Source menu
Vol+ Volume up and menu right
Vol- Volume down and menu left
CH+ Programme/Channel up and menu up

TV Menu navigation
To access this menu, press [MENU] button on the remote control. To enter
a menu press [OK]. If you wish to make changes to any of the default
settings, use the scroll (▲/▼/◄/►) buttons. To confirm any settings press
[OK] button. To exit this menu at anytime, press [EXIT] button.
CH- Programme/Channel down and menu down
MENU Displays Menu/OSD
SOURCE Displays the input source menu
STANDBY Standby Power On/Off

Choosing Mode Input/Source
To switch between the different input/connections.
a) Using the buttons on the remote control:
1. Press [SOURCE/ AV] - The source menu will appear.
2. Press [▼] or [▲] to select the input you require.
3. Press [OK].
b) Using the buttons on the Television:
1. Press [SOURCE].
2. Scroll up / down using CH+/ CH- buttons to the input/source you
require.
3. Press [SOURCE] to change input/source to the one selected.

Connections
Please see the table for connector types for
different models available on the page 12.
USB
USB 2.0 input 1, 2; USB 3.0 input 3
SD
HDMI HDMI 1 (ARC), 2, 3(MHL) in
HDMI2.0-Input 1, 2, 3
SD Card reader
SD Card Input
Mini AV
Video Input & Component / Video audio input
Mini YPbPr
Mini Component HD Input
Mini SCART
Mini SCART-Input
CI Card IN
CI input
*
RF In
RF / TV Aerial Input
Sat In
Satellite Input
Digital Optical Audio Out
Digital optical output

Home - shortcut to Home page
Browser - shortcut to default web browser
Movies - shortcut to movies
TV Shows - shortcut to TV Shows
Music - shortcut to music
Watchlist - shortcut to watch list

D-link
service input only
Applications
App portal - shortcut to Smart AQUOS NET+ application portal
Preinstalled Applications - preinstalled popular applications, like
YouTube, Facebook, Twitter etc., immediately at your disposal.

Smart Media
USB/SD Card Media - Multimedia mode offers the playback of various
content saved on a USB Memory Stick / SD Card. The content will be
divided into various file types: Photo, Music and Movie. The ‘File Option’ will
show and allow you to play all types of supported content.
1. You can navigate through the menu using the scroll ▲/▼/◄/►
buttons. To confirm the item you wish to play/view press [OK] button.
2.
Select the drive you require. (If your drive only has 1 partition you will
only see 1 item).
3.
You can now access the item. Press OK to view.
4.
While viewing content you can control the playback modes using the
remote control buttons or by bringing up the playback navigation
menu and selecting on-screen buttons ▲/▼/◄/► and [OK]
NOTE: USB extension cables are not recommended as
they can cause a reduction in picture/audio quality and
stoppages during play back of USB content.
Media Server - Automatically searches for digital media servers (DMS)
connected to your home network and enables the playback and rendering
of content from media servers
NOTE: ‘Media Server’ is not provided by the TV manufacturer, you can
download third party software and install it on your computer or NAS.
Wireless Connection* - Allows you to view content from your smart
phone or tablet on the TV screen. Wireless connection is formed using Wi-Fi
Direct, so access to a Wi-Fi network is not needed. You can share content
from your smartphone or tablet based on Android 4.4 and newer system.
WiDi (Wireless Display)* - lets you easily stream movies, videos,
photos and music directly to your TV screen. You’ll need a
laptop, smartphone, or tablet with Intel® WiDi technology.
* - This function is only available on selected smartphones and notebooks.
RJ 45
Ethernet
HEADPHONES
3.5mm Headphone output
AQUOS NET+

Sources
From this menu, you can switch your TV input signal to different source/
connected device.
EN

Settings
PICTURE
Picture Mode - Choose from the following presets.
– Standard - Default settings
– Movie - Set to be lighter in colour and less bright.
– Game - Optimal mode for gaming. TV will turn off all picture
postprocessing functions to achieve minimal input lag.
– PC - Optimal mode for reading text.
– Cinema - Movies are played at original 24/25 frames
per second, to get feel of real cinema.
– Personal - Lets you manually alter all the settings.
– Eco - Consume 15% less energy.
– Dynamic - Recommended settings for fast moving pictures.
Contrast - Switch the balance between black and white.
Brightness - Increase or decrease the brightness of the picture.
Colour - Increases the colour from black and white.
Tint - Lets you increase or decrease the level of tint
within the picture (for NTSC signal only).
Sharpness - Increase or decrease the sharpness of the picture.
Backlight - Adjust the screen's brightness by increasing/
decreasing the panel's backlighting.
Backlight Mode - allows you to modify way how panel backlighting works.
– Standard - default uniformly backlit screen.
– Scanning - rapidly flashes the backlight in a sequence from
the top to the bottom of the screen to reduce motion blur.
Colour Temperature - Choose from the following presets.
– Normal - Default settings.
– Warm - Increases red within the picture.
– Cold - Increases blue within the picture.
– Personal - Personal RGB balance from „Expert Settings“
menu. Suggested only for advanced users.
Aspect Ratio - Picture format varies depending on the channel/broadcast.
There are a number of different options to best meet your needs.
– Auto - Automatically displays the best picture format.
So the picture is in the correct position. May have
black lines at the top/bottom and/or sides.
– 4:3 - Displays the 4:3 picture in its original size.
Side bars are shown to fill the 16:9 screen.
– 16:9 - Fills the screen with a regular 16:9 signal.
– Zoom 1/2 - The picture is the correct proportion
but zoomed in to fill the screen.
– Dot by Dot (HDMI) - Will display the picture in its
original resolution without any change.
– Full Screen - Stretch signal to fill the screen.
Expert Settings
– Gamma - Adjust the tones between the bright
and dark parts of the picture.
– Red - Adjust red tone of the picture
– Green - Adjust green tone of the picture
– Blue - Adjust blue tone of the picture
– Noise Reduction - Filters and reduces the
noise (interference) of the picture.
– MPEG Noise Reduction - Allows you to reduce visible
interference caused by MPEG compression.
– Motion Enhancement - Makes picture movement and
movement of objects in the picture smoother. Use Motion
Enhancement to view fast-action video more clearly.
– Active Contrast - Automatically optimises the ‘backlight’ and
‘contrast’ of the picture according to the brightness of the screen.
– CMS Hue - This is a standard to adjust the colour
either more reddish or more bluish in tone.
– CMS Value - A higher value makes the image brighter.
A lower value makes the image darker.
– CMS Saturation - Increases or decreases the
saturation of a selected colour.
SOUND
Sound Mode - Choose from the following presets
– Standard - Default settings
– Music - Emphasises music over voices
– Movie - Provides live and full sound for movies
– Personal - Selects your personal sound settings
– Sports - Emphasises sound for sports
Headphones
– HP+TV - option to play sound from TV speakers
and headphones simultaneously.
– Volume - adjust volume for headphones.
Equalizer - Adjusts the volume of different sound
frequencies. The equalizer sound levels can only be adjusted
when the sound mode ‘Personal’ is selected.
Balance - To switch the sound between the left and right speakers.
Auto Volume Level (AVL) - When ‘on’ is selected, the volume
will stay at a constant level regardless of input/source.
DTS TruSurround - Allows you to turn surround sound effect ON or OFF.
Digital Output - This is the digital Audio output.
Choose from the following options:
– Off - Off
– Auto - Selects the best settings automatically
– PCM - Select this option if you are connecting to a Stereo
Hi-fi via digital cable (Pulse-code modulation (PCM) is
a digital representation of an analogue signal).
Audio Description - Additional sound track for visually impaired.
Available only on selected DTV shows.
AD Volume - to adjust volume of Audio Description sound track
AudioTrack - allows you to choose different audio/
language for Digital TV or media.
Audio Delay (ms) - Enables the user to adjust sound
setting to sync picture and audio for TV speakers.
SPDIF Delay (ms) - Enables the user to adjust sound setting to sync picture
and audio for external speakers connected via digital audio output.
NETWORK
Network Configuration - First you will need to select your connection
type. You can choose between either a Wi-Fi or Wire (cable) connection.
NOTE: For connecting to the Internet with a wired connection, connect a Cat
5/Ethernet cable (not included) from the TV to your broadband modem/router.
IP Configuration - LAN network connection settings
– Auto - Will automatically connect the TV to your home network
(this is the default setting and is highly recommended)
– Manual - Allows you to manually change the IP,
Netmask, Gateway and DNS information.
Wi–Fi Configuration - Wireless network connection settings
– Wi–Fi Auto Search - Automatically searches for available wireless
networks. Select the desired Wi–Fi network and then enter the
network password (if network is password protected). Once
the password is accepted, you will not be asked for it again.
NOTE: The connection process may take a few minutes, please be
patient. Every time the TV is then powered on it will automatically
connect to the network, this may also take some time.
Network Info - Information about the network settings
Network Test - A network connection test
SETUP
Language - Allows you to change the language of the menu.
Audio Languages - Allows you to change audio
language on selected DVB channels.
Subtitle Language - Allows you to change subtitles
language on selected DVB channels.
Hearing Impaired - If signal provides support for the hearing
impaired, the subtitles can be played by pressing the “Subtitle”. If
9
you set Hearing Impaired ON and switch to a channel with supports
for hearing impaired subtitles will be activated automatically.
Blue Screen - Changes the background when there is no input between
transparent and a blue background (Only available on some sources).
PVR File System - PVR Recording options*
– Select disk - Select USB port and disk partition
– TimeShift Size - Set size time of shift buffer.
– Format - You can format connected USB
storage device to FAT 32 file system.
WARNING: ALL DATA ON THE USB DEVICE WILL BE DELETED
– Speed - Tests write speed of connected USB storage devices.
* - only for devices with built in PVR function
First Time Installation - Starts the first time installation.
Reset TV - This resets the menus to factory settings.
HDMI CEC* - Allows you to operate devices
connected via HDMI with TV remote control.
– Device list* - Allows you to access devices menu and
operate the menu using TV remote control.
– Auto standby* - Automatically turn on/
off connected devices via HDMI CEC
– HDMI ARC* - Sends audio signal from terrestrial/satellite broadcast
via HDMI to the AV receiver without using any additional audio
cables, this functions is available only on HDMI 1 (LC-49CUF8462ES,
LC-55CUF8462ES); HDMI2 (LC-43CUF8462ES) output.
* - HDMI CEC must be supported by connected device.
Bluetooth - allows you to pair yours TV with bluetooth audio
device (for example: headphones, soundbars, etc.)
– Bluetooth - allows you to turn on/off bluetooth function.
– Scan devices - activates search for bluetooth devices in the area.
HbbTV - Allows the user to switch HbbTV on/off. To
use HbbTV, TV must be connected to the internet and
watched channel must support HbbTV service.
LED Status - Allows the user to switch the LED Power indicator light ON
or OFF, when the TV is being operated. (When this option is set to OFF
the LED Power indicator light will flash when the remote control is used)
Version Info - shows version of TV software
Store Mode* - switch ON/OFF shop demonstration mode
* - available only if store mode was selected during first time installation
CHANNEL
DVB Antenna - Set the type of DTV signal
– Terrestrial - Terrestrial (DVB-T)
– Cable - Cable (DVB-C)
Auto Tuning - Allows you to retune the television for all digital
channels, digital radio stations and analogue channels.
Analogue Manual Tuning - Allows you to
manually tune your analogue signal.
Digital Manual Tuning - Allows you to manually tune your digital signal.
Channel Edit - Allows you to delete, skip and add favourite channels.
– Red Button - delete selected channel.
– Green Button - rename selected channel
– Yellow Button - Move selected channel. Go with cursor to
channel, which you wish to move to different position, then
press YELLOW button. Now move selected channel with UP/
DOWN arrow to desired position and press YELLOW button
again to confirm its new position in channel list.
– Blue Button - Skip selected channel. Channels selected to Skip
will not be displayed while pressing CH+ or CH- buttons.
Signal Information - Information about DVB signal.
CI Information - Pay per view services require a “smartcard” to be
inserted into the TV. If you subscribe to a pay per view service the
provider will issue you with a ‘CAM’ and a “smartcard”. The CAM can
then be inserted into the COMMON INTERFACE PORT (CI Card In).
Recorded list - List of recorded TV shows.
Schedule List - Lists your programme reminders.
Dish Setup - This menu is only available in DVB-S2 mode. You can
select the type of satellite, your transponder and your LNB type, etc.
TIME
Clock - Set the date and time.
Off Time - Allows you to set a specific time for your TV to turn off.
On Time - Allows you to set a specific time for your TV to turn on, the
channel it will then display, the source it will be on and also the volume.
This function can then be toggled to repeat every day or a certain day.
Sleep Timer - Lets you set the sleep timer so the television automatically
switches off after a set amount of time. Off -> 10min -> 20min ->
30min -> 60min -> 90min -> 120min -> 180min -> 240min.
OSD Timer - Lets you adjust the amount of time the On
Screen Menu stays on the screen before disappearing.
Auto standby - Adjustment for the auto standby in
hourly increments: Off -> 3h -> 4h -> 5h.
Time Zone - Change your current time zone.
Time - you can choose from following settings:
– Auto - TV will autoamtically obtain current
time from DTV service or internet.
– Manual - allows you to set time manualy.
LOCK
System Lock - Allows you to lock or unlock the menu. You will be
asked to enter a 4 digit password. Use the ◄ button to quit the
password input. Use the ► button to clear. Default password is 0000.
Set Password - Change the default password.
Channel lock - Lock specific TV channels.
Parental Guidance - Lock TV channels based on age restriction.
Key Lock - Lock the TV buttons.
– Off - All TV buttons are unlocked.
– Partial - Only Standby button is unlocked.
– Full - All TV buttons are locked.
SOFTWARE UPDATE
Software Update (USB) - From time to time we may release new
firmware to improve the operation of the television (available to
download). This menu lets you install the new software/firmware onto
the television. Further details of how to do this will be issued with the
firmware. Contact the helpline or refer to the ‘www.sharp.eu’ website.
Software Upgrade (NET) - Allows for the TV software to be updated over
the Internet. This function will search for new software and update it when
necessary. For this function the TV needs to be connected to the internet
and USB storage device with at least 200MB of free space connected to it.
NOTE: The TV will automatically search for new releases of
software every time it is turned on. If new software is found, it
will ask you if you would like to download and install it. If you
select "Yes" the TV will upgrade to the latest software.
WARNING: Do not turn off the TV’s power until the upgrade is complete!

AQUOS NET+
AQUOS NET+ gives you the opportunity to enjoy variety of applications or
surf the Web on your AQUOS LCD TV.
To access the AQUOS NET+ Menu at any time press the NET+ button on the
remote control or select it from TV Multimedia menu.
NOTE: Please wait while the TV connects to the Wi-Fi network.
It may take a few minutes after you switch on the TV.
Navigate the menu using the scroll ▲/▼/◄/► buttons. To confirm the
item you wish to play/view press [OK] button. For ‘one-step’ back press
[Menu] button, and to access additional functions use the coloured
buttons. To leave AQUOS NET+ press [EXIT] button.
Home - Home screen with recommended movies
and recently opened applications
Browser - Opens the default web browser.
– Red Button - Zoom in
EN
– Green Button - Zoom out
– Yellow Button - Refresh page
– Blue Button - Return to browser home screen.
Movies - Opens a list of available movies
TV Shows - Opens a list of available TV shows
Music - Opens a list of available Music and Music videos
Watchlist - Opens a list of movies you can select to watch later.
Apps - Opens a list of available applications
Login - Create an account or login to existing
account to personalize your AQUOS NET+.
Settings - Filter application based on selected languages.
RESET OF USER SETTINGS: If you wish to completely reset all user
settings on AQUOS NET+, you must first enter the Settings menu
of the portal and press the YELLOW button on the remote control.
In the next screen, please select YES with cursor and then press OK
on the remote control to confirm the reset of the settings.
NOTE: To meet our customers’ demands, we are improving our
products. As a result of our ongoing efforts new applications will
be added continuously to the AQUOS NET+. Applications and
content in AQUOS NET+ can be changed without notice. Some of
the functions and content may not be available in your country.

7 Day TV Guide
TV Guide is available in Digital TV mode. It provides information about
forthcoming programmes (where supported by the Digital channel). You
can view the start and end time of all programmes and on all channels for
the next 7 days and set reminders.
1. Press [TV GUIDE]. The following 7 Day TV Guide will appear.
2.
Navigate through the menu using ▲/▼/◄/►.
You can now:
Record selected TV channel and TV show by pressing the RED button.*
Set a reminder by pressing GREEN.
View a previous day by pressing YELLOW.
View the next day by pressing BLUE.
[INFO] shows detailed information about the selected post
3.
Press [EXIT] to exit the 7 day TV Guide.
* - only for models with recording function

USB Record - Digital mode*
Built into this television is a USB record facility. This function is available in
Digital mode when used in conjunction with a compatible USB memory
stick or USB Hard drive. The benefits of this are as follows:
• Pause live TV and then playback, fast forward and rewind (up to live TV).
• One button record, if you decide you want to record the current
programme.
• Easy programmable recording from the 7 day TV Guide
Due to the nature of the product, it is necessary to use a high speed USB
memory stick (as the TV reads from and writes to the memory stick at the
same time, some memory sticks may not be suitable).
Minimum Specification - USB Memory Stick
– Read Speed - 20 MB/s (Mega Byte Per Second)
– Write Speed - 6 MB/s (Mega Byte Per Second)
Pause Live TV (Time Shift)*
Pausing Live TV is very simple.
– Press the play/pause button and the television will pause and the live
content will be recorded. To resume watching press play/pause again.
– Press fast forward to go forward in a recording (i.e. to skip adverts).
– Press fast rewind to go back in a recording
(i.e. if you fast forwarded too far).
TIP: When you switch the TV to standby or change channel the Time Shift
memory is wiped. To restart time shift you must press play/pause button.
One Button Record
At any point in time you may decide to record the current channel that you
are watching. To do this you need to press the [REC] button.
TIP: This television contains one TV tuner, therefore it can
only record the channel you are watching or record one
channel while the television is in standby mode.
NOTE: USB record function is only available in Digital TV mode.
Due to copyright laws and illegal copying/recording it is not
possible to record to/from any other input/output source.
* - only for devices with built in PVR function

MHL
MHL Port (HDMI 3) - MHL is a wired solution that allows you to
access the media from your phone or tablet onto the big screen in
the highest quality. By connecting an MHL cable (sold separately)
from your mobile device and into your TV you can playback all
your videos, games and photographs directly onto your TV.MHL
simply mirrors the screen of your mobile device so will work with all
applications, whilst connected it will also charge your device too.
11
Product fiche
Trademark
SHARP
LC-43CUF8462ES
LC-43CUF8462KS
LC-49CUF8462ES
LC-49CUF8462KS
LC-55CUF8462ES
LC-55CUF8462KS
A
A
A
Visible screen size (diagonal)
43" / 109cm
49" / 123cm
55" / 139cm
On-mode power consumption
69,0 W
89,0 W
110,0 W
Annual energy consumption *
101 kWh
130 kWh
161 kWh
Standby power consumption **
<0,50 W
<0,50 W
<0,50 W
Model
Energy efficiency class
Off mode power consumption
Screen resolution
N/A
3840 (H) × 2160 (V)
3840 (H) × 2160 (V)
3840 (H) × 2160 (V)
* - Energy consumption XYZ kWh per year, based on the power consumption of the television operating 4 hours per day for 365 days. The actual
energy consumption will depend on how the television is used.
** - when the TV is turned off with the remote control and no function is active
RJ 45
3.5 mm headphones output
Optical Audio output
Mini Component/YPbPr Input
Mini AV - Composite/CVBS Video In. + R/L
Audio in. for Composite/CVBS & Component/YPbPr
Mini SCART Input
CI Card Input
Sat. Input
RF Input - ( Analog /Digital)
USB Input
SD Card reader
HDMI Input
Model
TUNER
Technical specification
LC-43CUF8462ES**
T/T2/C/S2
x3
x1
x3
x1
x1
x1
x1
x1
x1
x1
x1
x1
LC-43CUF8462KS**
T/T2/C/S2
x3
x1
x3
x1
x1
x1
x1
x1
x1
x1
x1
x1
LC-49CUF8462ES*
T/T2/C/S2
x3
x1
x3
x1
x1
x1
x1
x1
x1
x1
x1
x1
LC-49CUF8462KS*
T/T2/C/S2
x3
x1
x3
x1
x1
x1
x1
x1
x1
x1
x1
x1
LC-55CUF8462ES*
T/T2/C/S2
x3
x1
x3
x1
x1
x1
x1
x1
x1
x1
x1
x1
LC-55CUF8462KS*
T/T2/C/S2
x3
x1
x3
x1
x1
x1
x1
x1
x1
x1
x1
x1
* - HDMI 1(ARC)
** - HDMI 2(ARC)
4K
RESOLUTION
3840x2160
ACE PRO
U LT R A
600
H.265
HEVC
13
Model
LC-43CUF8462ES
LC-43CUF8462KS
LC-49CUF8462ES
LC-49CUF8462KS
LC-55CUF8462ES
LC-55CUF8462KS
Audio power
2 x 8W
Voltage
AC 220V~240V; 50Hz;
Power consumption
(Ecohome/Standard/Max/Standby/Annum); EEI
69/95/115/
<0,5W / 101kWh; A
89/115/140/
<0,5W / 130kWh; A
110/145/180/
<0,5W / 161kWh; A
3840 x 2160
3840 x 2160
3840 × 2160
43" / 109cm
49" / 123cm
55" / 139cm
280 cd/m²
280 cd/m²
300 cd/m²
966 mm
185 mm
602 mm
43" / 109cm
VESA: 400 × 200
8,3kg
1099mm
67 mm
230 mm
571mm
686 mm
49" / 123cm
VESA: 600 × 300
12,2kg
1238 mm
69 mm
230 mm
645 mm
768 mm
69 mm
55" / 139cm
VESA: 600 ×300
14,2kg
726 mm
Compatible files in USB Mode
Media
Movie
Codec
Resolution
MPEG1/2
1080Px2@30fps
1080P@60fps
80Mbps
MPEG4
1080Px2@30fps
1080P@60fps
40Mbps
.MPG, .MPEG, .mp4, .mov,
.3gpp, .3gp, .avi
DivX 3.11, DivX 4.12, DivX 5.x,
DivX 6, XviD
1080Px2@30fps
1080P@60fps
40Mbps
.divx, .mp4, .mov, .avi, .mkv, .asf
H.263
1080Px2@30fps
1080P@60fps
40Mbps
.mp4, .mov, .3gpp, .3gp, .av,
.mkv
H.264
3840x2160@30fps
1080P@60fps
135Mbps
.flv, .mp4, .mov, .3gpp, .3gp, .ts,
.trp, .tp, .asf, .wmv, .avi, .mkv
Motion JPEG
720P@30fps
1080P@30fps
10Mbps
.avi, .3gpp, .3gp, .mp4, .mov,
.mkv, .asf
20Mbps
.mkv, .webm
HEVC
4K2K@60fps
100Mbps
.mp4, .mov, .mkv, .ts, .trp, .tp
VP9
4K2K@30fps
100Mbps
.mkv, .webm
Codec
Sample rate
Data Rate
File Ext.
MPEG1/2 Layer1, 2, 3
16KHz ~ 48KHz
32Kbps ~ 320Kbps
.mp3, .avi, .as, .divx, .mkv,
.ts, .trp, .tp, .DAT, .VOB, .MPG,
.MPEG, .wav
AC3
32KHz, 44.1KHz,
48KHz
32Kbps ~ 640Kbps
.ac3, .avi, .mkv, .divx, .3gpp,
.3gp, .mp4, .mov, m4a, .ts, .trp,
.tp, .DAT, .VOB, .MPG, .MPEG,
.rm, .rmvb
EAC3
32KHz, 44.1KHz,
48KHz
32Kbps ~ 6Mbps
.ec3, .3gpp, .3gp, .mp4, .mov,
m4a, .ts, .trp, .tp, .DAT, .VOB,
.MPG, .MPEG
AAC, HEAAC
8KHz ~ 48KHz
128bps ~ 320Kbps
.aac, .avi, .mkv, .divx, .3gpp,
.3gp, .mp4, .mov, m4a, .ts, .trp,
.tp, .DAT, .VOB, .MPG, .MPEG, .flv,
.rm, .rmvb
WMA
8KHz ~ 48KHz
128bps ~ 320Kbps
.wma, .wmv, .asf, .avi, .mkv
VORBIS
Up to 48KHz
DTS
Up to 48KHz
Audio
Media
File
JPEG
Photo
File Ext.
.DAT, .VOB, .MPG, .MPEG,.ts, .trp,
.tp, .mp4, .mov, .3gpp, .3gp, .avi,
.mkv, .asf
VP8
Media
Data Rate
PNG
BMP
MPO
.mkv, .webm, .3gpp, .3gp, .mp4,
.mov, m4a, .ogg
< 1.5Mbps
Resolution
.ts, .trp, .tp, .DAT, .VOB, .MPG,
.MPEG, .mkv)
File Ext.
15360x8640, (1920x8 x 1080x8)
Base-line
1024x768
Progressive
9600x6400
Non-interlace
1200x800
Interlace
9600x6400
.jpg/.jpeg
.png
.bmp
15360x8640, (1920x8 x 1080x8)
Base-line
1024x768
Progressive
.mpo
15
Stand Installation
3
4
R
1
2
4x
L
English: To assemble the base stand to the TV you will need a cross
head screwdriver. To avoid damage to the TV screen during assembly
ensure the TV is placed on a soft flat surface with the LCD screen facing
downwards.
UMC Poland sp. z o.o.
Ostaszewo 57B, 87-148 Łysomice,
Poland
Assembled in Europe
www.sharp.eu
SHA/MAN/0165
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising