Sharp | D40CF6352KB23F | Instruction manual | Sharp LC-40CFG6352K Smart LED TV Instruction Manual

Sharp LC-40CFG6352K Smart LED TV Instruction Manual
User Guide
Models:
LC-32CHG6351K
LC-32CFG6351K
LC-40CFG6351K
LC-43CFG6351K
LC-49CFG6351K
LC-55CFG6351K
LC-32CHG6352K
LC-32CFG6352K
LC-40CFG6352K
LC-43CFG6352K
LC-49CFG6352K
LC-55CFG6352K
Image for illustration purposes only. Actual product may vary.
Sharp - User Guide - SHA-MAN-0245 - 6351-2K.indd 1
11/07/2017 14:16:18
Sharp - User Guide - SHA-MAN-0245 - 6351-2K.indd Sec1:2
11/07/2017 14:16:20
Manufacturers Guarantee
IMPORTANT GUARANTEE INFORMATION
Congratulations on purchasing this television. We hope you have many years of trouble free
enjoyment from your purchase.
Your product is covered under the manufacturers guarantee for 12 months from the date
of purchase.
If you experience any difficulties with your TV, please refer to the ‘Frequently asked questions’ section
in this user guide.
If you are still unable to remedy the issue, try resetting the TV to factory settings. (Details in the
‘Settings menu’ section of this user guide). Alternatively you can contact the helpline on the
number below.
In the event that a fault is diagnosed, the helpline will arrange to collect the TV from your home
or work address, return it to our service centre, repair the item and then return it to you.
If we believe we cannot offer a permanent repair, we will replace the item.
Technical Support Information
Telephone UK 0871 097 1163, ROI 01443 3940
Web support: www.umc-uk.co.uk
The telephone opening hours are Monday to Friday 8.30am to 6pm, Saturday 9am – 5pm.
UK: Calls cost 12p per minute plus your phone company’s access charge.
ROI: Calls are charged at a local rate.
You must retain all packaging materials, in addition to your proof of purchase/receipt,
as you will need these in the event of warranty/service support.
This guarantee is in addition to and does not affect your statutory rights.
If you need to call the helpline, you will need the following information.
1) Model No
______________________________________ (You can find this on the rear of the TV)
2) Date of purchase
______________________________________ (You can find this on your sales receipt)
3) Serial Number
______________________________________ (You can find this on the rear of the TV)
EXAMPLE OF LABEL ON REAR OF TV
Model No
Serial No.
This TV set is for domestic use only
3
Sharp - User Guide - SHA-MAN-0245 - 6351-2K.indd Sec1:3
11/07/2017 14:16:20
Important safety instruction
Please read these instructions. All
the safety and operating instructions
should be read before the appliance
is operated.
Warnings
• Television sets with 40” screens or more must be
lifted and carried by at least 2 people.
• This television does not contain any parts that are
serviceable by the user. In case of a fault, contact the
manufacturer or authorised service department.
Exposing the internal parts inside the TV may
endanger your life. The manufacturers guarantee
does not extend to faults caused by repairs carried
out by unauthorised third parties.
To prevent spread of fire,
keep candles or other open
flames away from this product
at all times
• Do not use TV set directly after unpacking.
Wait until TV warms up to the room temperature
before using it.
• To reduce the risk of fire, electric shock or damage
to the TV, do not expose it to dust, rain or moisture.
Never expose the TV to dripping or splashing and do
not place objects filled with liquids on or near the TV.
• Do not connect any external devices (DVD player,
games console etc) when the TV is switched on.
Disconnect both the TV and device from the mains
before connecting. Only switch appliances on when
the connection process is complete.
• Do not place the television in a confined space and
do not obstruct the ventilation openings at the rear
of the television.
• When installing on a wall, ensure the TV is at
least 5cm from the wall for ventilation.
• Always ensure that the TV’s ventilation openings
are not covered with items such as newspapers,
table-cloths, curtains, etc.
• Dispose of this television and any components
including batteries in an environmentally friendly
manner. If in doubt, please contact your local
authority for details of recycling.
• Ensure this TV is used in moderate climates only.
• In case of electrostatic discharge (ESD) the TV may
display incorrect functions. In such case, switch
the TV off and switch the TV back on. The TV will
work normally.
WARNING: Never place a television set on an
unstable location. A television set may fall,
causing serious personal injury or death. Many
injuries, particularly to children, can be avoided
by taking simple precautions such as:
• Use cabinets or stands recommended by the
manufacturer of the television set.
• Only use furniture that can safely support the
television set.
• Ensure the television set is not overhanging the edge
of the supporting furniture.
• Do not place the television set on tall furniture
(for example, cupboards or bookcases) without
anchoring both the furniture and the television
set to a suitable support.
• Do not place the television set on cloth or other
materials that may be located between the television
set and supporting furniture.
• Please educate children about the dangers of
climbing on furniture to reach the television set or
its controls.
• If your existing television set is being retained and
relocated, the same considerations as above should
be applied.
Safety
• For your safety, this appliance is fitted with a
fused 3 pin mains plug. Should the fuse need to be
replaced, ensure that any replacement is of the same
amperage and approved with the BSI mark.
• Never try and replace the mains plug unless you have
adequate qualifications and are legally authorised to
do so. In the event that a replacement mains cable
is required, contact the manufacturer for a suitable
replacement.
• Never use the television if it is damaged in any way.
• Always place the television on a flat level surface
avoiding anywhere which may be subject to
strong vibration.
• The ideal distance to watch the television is
approximately five times the length of the diagonal
measurements of the TV screen.
• Ensure the television is not placed on top of the
power cable as the weight of the television may
damage the cable and cause a safety hazard.
• Never place mobile phones, speakers or any
other device which may cause magnetic or radio
interference, near the television. If interference is
apparent, move the device causing the interference
away from the television.
• To disconnect the set from the mains, remove the
mains plug from the socket.
• Ensure that the mains plug is always easily accessible.
WARNING: Excessive volume when using
earphones and headphones can cause loss
of hearing.
4
Sharp - User Guide - SHA-MAN-0245 - 6351-2K.indd Sec1:4
11/07/2017 14:16:21
Important safety instruction
Maintenance
• To clean your TV, wipe with a soft, dry cloth. If the
surfaces are extremely dirty, use a soft cloth dipped
in a soap and water solution or a weak detergent
solution.
• Never use alcohol, paint thinner or benzene to clean
this unit.
• Before using a chemically treated cloth, read the
instructions that came with the cloth carefully.
CAUTION: If water or other liquid enters the
television through the display panel surface,
a malfunction may occur.
• Time displays.
• Teletext: Do not view a stationary page for a long
period of time
• TV/DVD menus: e.g. listings of DVD disc content.
• Pause mode: Do not leave the TV in pause mode
for long periods of time, e.g. when watching DVDs
or videos.
Important: Once ‘shadow image/screen burn’
occurs, it will never disappear and is not
repairable under warranty.
How do I dispose of this product?
UK: Waste electrical products should not
be disposed of with household waste.
Please dispose of the product at a
designated collection point for recycling
of WEEE. For your nearest facilities, please
see www.recycle-more.co.uk or in store
for details.
ROI: Waste electrical products should not be
disposed of with household waste. Separate
disposal facilities exist. Check with your local
authority or retailer for recycling advice.
Batteries
Packaging
• The safest way to transport your item is in the
original box/packaging - please save your packaging
for this.
• You will need the original box/packaging in the
event of warranty/service repair or support. We
are unable to carry out warranty/service if you are
unable to package the item correctly.
Cd
• Do not expose batteries to high temperatures,
excessive heat, prolonged sunshine or fire as this may
cause leakage, explosion or ignition.
Observe the correct polarity when inserting batteries.
• Do not use different types of batteries together or
mix old and new batteries.
• Dispose of batteries in an environmentally
friendly way.
• Certain regions may regulate the disposal of
batteries. Please consult your local authority.
Important information regarding use of video
games, computers, captions or other fixed image
displays
The extended use of fixed image program material can cause
a permanent “shadow image” on the LCD/LED panel, also
known as “screen burn”.
This “shadow image” can appear in the background during
normal viewing. This type of irreversible LCD/LED panel
deterioration can be limited by observing the following steps:
1. Reduce the brightness/contrast setting to a minimum
suitable viewing level.
2. Do not display the fixed image for extended periods
of time.
3. Turn the power off when not in use.
Examples of images that are more likely to cause “screen burn”
are as follows (this is not an exhaustive list):
• TV channel logos: e.g. shopping channel logos and
pricing displays - especially if they are bright and
stationary. Moving or low-contrast graphics are less
likely to cause ageing of the screen.
5
Sharp - User Guide - SHA-MAN-0245 - 6351-2K.indd Sec1:5
11/07/2017 14:16:21
Trademarks
The terms HDMI and HDMI High-Definition Multimedia
Interface, and the HDMI Logo are trademarks or registered
trademarks of HDMI Licensing, LLC in the United States and
other countries.
HDTV
The “HD TV” Logo is a trademark of DIGITALEUROPE.
HDTV 1080p
The “HD TV 1080p” Logo is a trademark of DIGITALEUROPE.
DVB
The DVB logo is the registered trademark of the Digital Video
Broadcasting (DVB) project.
For DTS patents, see http://patents.dts.com. Manufactured
under license from DTS Licensing Limited. DTS, the Symbol, &
DTS and the Symbol together are registered trademarks.
DTS TruSurround is a trademark of DTS, Inc. © DTS, Inc.
All Rights Reserved.
CE Statement:
Hereby, Universal Media Corporation l.t.d. declares
that this LED TV is in compliance with the essential
requirements and other relevant provisions of
RED Directive 2014/53/EU.
http://www.sharp.eu/av/documents-of-conformity
FREEVIEW HD
The FREEVIEW HD words and logos are trade marks of DTV
Services LTD. © DTV Services Ltd.
SAORVIEW
SAORVIEW is a registered trademark owned by RTÉ.
Manufactured under license from Dolby Laboratories.
Dolby, Dolby Audio and the double-D symbol are trademarks
of Dolby Laboratories.
The “CI plus” Logo is a trademark of CI Plus LLP.
YouTube
YouTube and the YouTube logo are trademarks of Google Inc.
Wi-Fi
The Wi-Fi CERTIFIED Logo is a certification mark of the
Wi-Fi Alliance.
Harman / Kardon
Harman Kardon is trademark of HARMAN International
Industries, Incorporated, registered in the United States
and/or other countries.
Miracast
Wi-Fi CERTIFIED Miracast and Miracast are trademarks of
Wi-Fi Alliance.
DLNA
DLNA, the DLNA Logo and DLNA CERTIFIED are trademarks,
service marks, or certification marks of the Digital Living
Network Alliance.
6
Sharp - User Guide - SHA-MAN-0245 - 6351-2K.indd Sec1:6
11/07/2017 14:16:21
CONTENTS
Manufacturers guarantee information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Important safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5
Trademarks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
What is included in the box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Attaching / detaching the stand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Securing the TV to a wall / wall mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
TV buttons and Input Source menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14-17
Connecting the TV to the Internet. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
TV menu operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20-31
Picture menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20-21
Sound menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22-23
Channel menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Network Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Time menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Lock menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Setup menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
More Apps Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29-30
Media menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30-31
7 day TV guide and channel list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
USB record - Freeview / Saorview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
General information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34-42
Frequently asked questions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34-35
Technical specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36-42
7
Sharp - User Guide - SHA-MAN-0245 - 6351-2K.indd Sec1:7
11/07/2017 14:16:21
What is included in the box
WHAT IS INCLUDED IN THE BOX
Accessories
Included with this TV are the following accessories.
1 x User guide
1 x Remote Control and 2 x AAA Batteries
User guide
1 x Quick start guide
1 x Mini composite / AV cable
Quick start
guide
1 x Mini component / YPbPr cable
1 x TV
1 x Stand installation pack
4x
1 x L (left)
1 x RF cable
1 x R (right)
2 x Wall mounting covers
(Recommended for covering the openings that are used for
connecting the stand feet, when the TV is wall mounted)
1 x L (left)
1 x R (right)
Please save your box/packaging as you will need this in the event of warranty/service repair or support.
We are unable to carry out warranty/service if you are unable to package it correctly. The safest way to
package your item in the event of warranty/service repair is in it’s original box/packaging.
8
Sharp - User Guide - SHA-MAN-0245 - 6351-2K.indd Sec1:8
11/07/2017 14:16:21
Attaching/detaching the stand
ATTACHING THE STAND
Attaching the stand feet
To complete the stand feet installation you will require a cross head screw driver.
Screws that are included.
4x
R
(fig.1) Place the TV set on a
flat and clean surface with
the panel facing downwards
to avoid damage, then fix
the stand feet shown. The feet
are marked L (left) and R (right).
L
1
4x
R
(fig.2) Secure the stand
feet to the underside of
the TV set using the 4
screws provided.
L
2
Detaching the stand
Remove the screws
highlighted then remove
the stand feet from the
underside of the TV set.
R
L
2x
R
When wall mounting the
TV set, we recommend
covering the openings, that
are used for connecting the
stand feet, at the underside
of your TV set by using the
wall mounting clips provided.
L
9
Sharp - User Guide - SHA-MAN-0245 - 6351-2K.indd Sec1:9
11/07/2017 14:16:24
Securing the TV to a Wall/Wall Mounting
SECURING THE TV TO A WALL
Securing the TV to a wall with anti-tip straps
For maximum security in the home when using a TV with its stand anti-tip straps should be fitted. These
are available from supermarket websites and other websites and are an easy, inexpensive and effective
way of ensuring your TV stays safely upright. Straps are designed to be attached to the rear of the TV and
then tethered to the wall or the furniture the TV is stood on.
Note - Please ensure that children do not climb on the TV set.
A) Using one or both of the top wall-mounting
holes and screws (the screws are already supplied
in the wall mounting holes) fasten one end of the
fastening cord/s to the TV.
B) Secure the other end of the fastening cord/s to
your wall. (you will need screws/fixings suitable
for your wall type - available separately from most
DIY stores).
The Royal Society for the Prevention of Accidents is urging people to take care with flat-screen televisions.
RoSPA stated in 2010 that “Toddlers are particularly at risk of pulling flat-screen televisions on to
themselves. They are unsteady on their feet and are attracted by colourful television images.”
The risk is increased as televisions become lighter.
Wall Mounting
IMPORTANT - Before drilling any holes in the wall ensure you are not drilling
where there could be any electrical wires, water or gas pipes.
1) Remove the four screws highlighted that are supplied in the wall mounting
holes.
2) The wall mount can now be easily attached to the mounting holes on the
rear of the TV.
For VESA wall mounting information please refer to the Technical
Specification page.
For optimum viewing, if wall mounting the TV higher than eye level, the TV should be tilted downwards
so that the TV’s screen is ‘face on’. See fig 1 and 2.
fig 1
INCORRECT
TV
fig 2
Viewing angle
CORRECT
TV
Viewing angle
Important – If wall mounting this TV, only use the screws already provided in the wall mounting holes.
Using other screws which are longer could cause irreparable damage to internal parts. When using a
wall bracket, please ensure the screws in the back of the TV set are not over tightened.
10
Sharp - User Guide - SHA-MAN-0245 - 6351-2K.indd Sec1:10
11/07/2017 14:16:25
Remote control
REMOTE CONTROL
Key
For models with integrated DVD players.
For models with PVR Function.
For models with USB Playback.
For models with 3D functions.
1
2
3
4
STANDBY - Switch on the TV when in standby or vice versa.
NETFLIX - Access the Netflix application.*
MUTE - Mute the sound or vice versa.
NUMBER BUTTONS - 0–9 to select a TV channel directly.
TV GUIDE - Opens the 7 day TV guide (digital TV mode).
- To return to the previous channel viewed.
YOUTUBE - Access the Youtube App.
NET+ - Access the Aquos Net application.
SOURCE - To display the input/source menu.
TV - Switches to the Digital TV source.
VOL (+/-) - To increase/decrease the sound level.
FAV - To display favourites menu.
INFO - Press once for now/next channel information.
- Press twice for information about the current programme.
CH (+/-) - To increase or decrease the channel being watched.
SUBTITLE - To switch the dialogue at the bottom of the screen (on/off).
TEXT - To enter/exit Text.
MENU - To display OSD menu.
BACK - To go back a previous step.
EXIT - To exit all menus.
- Allows you to navigate the on-screen menus and
adjust the system settings to your preference. When there is no menu
displayed on the screen, you will be able to adjust the picture/sound
settings on the TV, use the button to change the picture settings and
the button to change the sound settings.
1
2
3
4
5
5
- To restart the current chapter
- To advance forward to the next chapter
- To stop the playback/Eject Disc
(To EJECT the disc press/hold the
button for 4 seconds)
- To play in fast rewind mode
- To play in fast forward mode
- To play/pause
RECORD/DVD MENU - Access the USB record function/Access the
DVD menu of the DVD inserted (must be set to the DVD source).
REC LIST/DVD SETUP - Opens the list of previously recorded items/Access
the TV’s DVD setup menu (must be set to the DVD source).
A-B - Press once to set point, press a second time to return to point.
ANGLE - Select an alternative camera angle during playback of the DVD.
REPEAT - To repeat playback.
GOTO - To go to a specific chapter.
Buttons to use when
pairing the remote
control to the TV.
If the remote control does not function with the TV, the remote control may need to be paired with the
TV set, please refer to the ‘Frequently Asked Questions’ pages for more information.
11
Sharp - User Guide - SHA-MAN-0245 - 6351-2K.indd Sec1:11
11/07/2017 14:16:25
Sharp - User Guide - SHA-MAN-0245 - 6351-2K.indd Sec1:12
11/07/2017 14:16:25
TV Buttons and Input Source Menu
TV BUTTONS AND INPUT SOURCE MENU
1
2
3
4
5
6
7
1 Volume up and menu right
2 Volume down and menu left
3 Programme/channel up and menu up
4 Programme/channel down and menu down
5 Displays menu/OSD
6 Displays the ‘Input Source’ menu
7 Standby power On/Off
Note: The shape of the TV buttons may vary by model.
Choosing Mode Input/Source
Use the source menu to switch between
input/connections.
A) Using the buttons on the remote control:
1) Press [SOURCE] - The source menu will appear.
2) Press [<] or [>] to select the input you require.
3) Press [OK].
B) Using the buttons on the Television:
1) Press [SOURCE].
2) Scroll right / left using VOL+/ VOL- buttons to
the input/source you require.
3) Press [SOURCE] to change input/source to the
one selected.
For further information on input/connections please
view ‘Connections’ pages.
An example of the ‘Input Source’ menu
(will vary by model)
13
Sharp - User Guide - SHA-MAN-0245 - 6351-2K.indd Sec1:13
11/07/2017 14:16:25
Connections
CONNECTIONS
Input/Outputs for the 32”, 40” and 43” models only.
ARC
ETHERNET
1
A
2
VGA/PC In
VGA/PC (Audio In)
SCART
RF IN
SAT IN
D
E
F
G
H
C
B
USB (2.0)
J
I
CI CARD IN
5V
500mA MAX
DIGITAL
AUDIO OUT
OPTICAL
EARPHONE
AV IN
L
M
K
YPbPr IN
N
O
A
Ethernet/LAN*
Network Connection
I
Optical Digital Audio
Digital Audio output
B
HDMI 1
HDMI input
J
HDMI 3 (MHL)***
HDMI input
C
HDMI 2 (ARC)
HDMI input
K
2 x USB
USB port
D
VGA PC
VGA-PC input
L
Earphone
Earphone output
E
VGA PC Audio In
3.5mm PC audio input
M
AV IN
Audio/Video Input
F
SCART
SCART input
N
YPbPr
HD input (Ypbpr)
G
RF IN
RF / TV Aerial Input
O
CI CARD IN
Common Interface module
H
SAT IN**
Satellite input
* The Ethernet/LAN port is used for Freeview HD services and smart functions.
**The Satellite input is for the LC-32CHG6352K, LC-32CFG6352K, LC-40CFG6352K and LC-43CFG6352K
models only.
*** HDMI 3 (MHL Port) - MHL is a wired solution that allows you to access the media from your phone or
tablet onto the big screen in the highest quality.
By connecting an MHL cable (sold separately) from your mobile device and into your TV you can playback
all your videos, games and photographs directly onto your TV.
MHL simply mirrors the screen of your mobile device so will work with all applications, whilst connected it
will also charge your device too.
14
Sharp - User Guide - SHA-MAN-0245 - 6351-2K.indd Sec1:14
11/07/2017 14:16:26
Connections
CONNECTIONS
Input/Outputs for the 49” and 55” models only.
ARC
AV IN
ETHERNET
1
2
B
A
USB (2.0)
J
RF IN
F
SAT IN
G
H
OPTICAL
I
CI CARD IN
5V
500mA MAX
SCART
E
D
C
DIGITAL
AUDIO OUT
YPbPr IN
EARPHONE
L
K
SD CARD IN
M
N
A
Ethernet/LAN*
Network connection
H
SAT IN**
Satellite input
B
HDMI 1
HDMI input
I
Optical Digital Audio
Digital Optical Audio Output
C
HDMI 2
HDMI input (ARC)
J
HDMI 3
HDMI input***
D
AV IN
Audio/Video input
K
USB x 2
USB port
E
YPbPr
HD input (YPbPr)
L
Earphones
Earphone output
F
SCART
SCART Input
M
CI card in
Common interface module
G
RF in
RF / TV aerial input
N
SD Card IN
SD Memory Card Input
* The Ethernet/LAN port is used for Freeview HD services and smart functions.
**The Satellite input is for the LC-49CFG6352K and LC-55CFG6352K models only.
*** HDMI 3 (MHL Port) - MHL is a wired solution that allows you to access the media from your phone or
tablet onto the big screen in the highest quality.
By connecting an MHL cable (sold separately) from your mobile device and into your TV you can playback all
your videos, games and photographs directly onto your TV.
MHL simply mirrors the screen of your mobile device so will work with all applications, whilst connected it
will also charge your device too.
15
Sharp - User Guide - SHA-MAN-0245 - 6351-2K.indd Sec1:15
11/07/2017 14:16:26
Connections
CONNECTIONS
Note: Connecting cables are shown for example only and may not be included. Please check ‘What Is
Included In The Box’ page.
Connecting to a device with Composite AV/Video output
TV Source should be set to Composite/AV
L (white)
R (red)
Mini
AV in
Video
(yellow)
Connecting to a device with SCART output
TV source should be set to SCART
Scart
Scart
Connecting to a device with HDMI output
A HDMI cable can output both video and audio and enables you to enjoy digital-quality video and audio
with minimal loss of quality.
TV Source should be set to the corresponding HDMI port (HDMI 1, HDMI 2 etc)
HDMI 3 (MHL Port) - MHL is a wired solution that allows you to access the media from your phone or
tablet onto the big screen in the highest quality.
By connecting an MHL cable (sold separately) from your mobile device and into your TV you can
playback all your videos, games and photographs directly onto your TV.
MHL simply mirrors the screen of your mobile device so will work with all applications, whilst connected
it will also charge your device too.
16
Sharp - User Guide - SHA-MAN-0245 - 6351-2K.indd Sec1:16
11/07/2017 14:16:27
Connections
CONNECTIONS
Connecting to a device with Component/YPbPr output
If you are supplied with a cable from the device which has RED, GREEN, BLUE, RED & WHITE connectors
you must connect via Component (for picture) and by phono cable (for sound).
TV Source should be set to Component/YPbPr
Y (green)
PB (blue)
Mini
YPbPr
PR (red)
L (white)
R (red)
Mini
AV in
Video (yellow)
is not connected
Connecting to an external audio device (Amplifiers, Surround Sound,
Sound Bars etc)
When connecting via the TV’s 3.5mm Earphone output, this will disable the TV speakers.
There are two options when connecting a device via the 3.5mm Earphone Output and the
Digital Optical Audio Output
OPTION 1 for 3.5mm EARPHONE Output
3.5mm
audio
in
3.5mm
earphone
OPTION 2 for Digital Optical Audio Output
Digital
audio
out
(optical)
Digital
audio
in
(optical)
Connecting an Ethernet/Network cable
The Ethernet/LAN port is used for Freeview HD services and smart functions.
Ethernet
port
Ethernet
port
Connecting to a device with VGA/PC output (Laptop or Desktop Computer)*
TV Source should be set to VGA/PC
*VGA/PC Connection for the 32”, 40” and 43” models only
VGA/PC
in
VGA/PC
out
VGA/PC
(audio
in)
Audio
out
17
Sharp - User Guide - SHA-MAN-0245 - 6351-2K.indd Sec1:17
11/07/2017 14:16:27
Sharp - User Guide - SHA-MAN-0245 - 6351-2K.indd Sec1:18
11/07/2017 14:16:28
Connecting the TV to the Internet
CONNECTING THE TV TO THE INTERNET
When you first power on your new SMART TV there will be an option to follow various on-screen set up
instructions. These instructions will enable you to connect to the internet via your home network.
You can connect to your home network either wirelessly or with an Ethernet cable.
If you decide not to follow the initial set up instructions and need to connect at a later date please follow
these simple steps below:
Connecting your TV with a wireless connection
1) Press Menu on the remote control (fig.1).
2) Scroll through the menu, select ‘Settings’ then enter the ‘Network’ menu.
3) in the ‘Network’ menu, example below, scroll down and select ‘Wi-fi Config’ (fig.2).
4) Within the ‘Wi-Fi config’ options, highlight and select ‘Wi-Fi Auto Search’.
5) The TV will then automatically search for networks.
6) Select the preferred type of network connection then enter the network (a password* may be required).
7) The TV will then establish a connection.
*If a padlock is shown next to a WiFi service, this indicates that it is a secured network and will require
a password to log in. When entering the WiFi password, we recommend using the “Password Visible”
feature. When asked for a network password, using the remote control, scroll down and highlight
“Password Visible” and press “OK”, the password will then be displayed in full. Network passwords are
case sensitive, please ensure the entered text matches the password exactly for a successful connection.
An icon will appear in the top right hand side of the ‘Application’ menu to confirm the TV is connected
to the internet.
Connecting your TV with an Ethernet/LAN cable:
1) Plug in your Ethernet cable into the RJ45 (Ethernet) socket located at the rear of the television.
Ethernet
port
2) Press Menu on the remote control. (fig.1)
3) Scroll through the menu, select ‘Settings’ then enter the ‘Network’ menu.
4) In ‘Network Configurations’, select ‘Cable’.(fig.2).
5) Set will automatically configure itself.
6) Exit the menu by pressing ‘EXIT’ on the remote control.
fig.1
fig.2
19
Sharp - User Guide - SHA-MAN-0245 - 6351-2K.indd Sec1:19
11/07/2017 14:16:28
TV Menu Operation
PICTURE MENU
To access this menu, press [MENU] button on the remote control and scroll right.
To select a sub menu press [OK].
buttons.
If you wish to make changes to any of the default settings, use the scroll
To confirm any settings press [OK] button. To exit this menu at anytime, press [EXIT] button.
Picture Mode - Choose from the following presets:
Dynamic
Recommended settings for fast moving pictures
Standard
Standard settings
Movie
Set to be lighter in colour and less bright
Personal
Lets you manually alter all the settings
Economy
Power saving mode which reduces the energy used by up to
25% (by reducing the power to the LED/LCD panel).
In Economy mode, the TV will switch itself to Standby mode
after 3-5 hours in the event that the TV buttons or remote
control buttons are not pressed (change the picture mode
to another setting to de-activate this function)
You can make the following adjustments in Personal mode:
Contrast - Switch the balance between black and white.
Brightness - Increase or decrease the brightness of the picture.
Colour - Increases the colour from black and white.
Tint - Lets you increase or decrease the level of tint within the picture
(only available for NTSC source signal).
Sharpness - Increase or decrease the sharpness of the picture.
Colour Temperature - Choose from the following presets:
Normal
Default settings
Warm
Increases red within the picture
Cold
Increases blue within the picture
20
Sharp - User Guide - SHA-MAN-0245 - 6351-2K.indd Sec1:20
11/07/2017 14:16:28
TV Menu Operation
PICTURE MENU
Aspect Ratio - Within the UK the picture format varies depending on the channel/broadcast. There are a
number of different options to best meet your needs. Choose from the following settings:
Auto
Automatically displays the best picture format so the picture is in the correct position, black lines maybe
viewable at the top/bottom and/or sides.
4:3
Full Screen
Displays a picture in
the full screen size
without overscan.
16:9 signal will be
displayed in original
proportion. Other
picture format will
be stretched to fill
the screen
Displays the 4:3
picture in its
original size.
Side bars are
shown to fill the
16:9 screen
16:9
Zoom1 and Zoom 2
Fills the screen with
a regular 16:9 signal
and 4:3 picture
format will be
stretched to fill
the screen
The picture
is the correct
proportion but
zoomed in to
fill the screen
PC Menu - Allows you to adjust the picture settings of the TV when being used with a PC/Laptop.
Only available when the TV is in VGA/PC source mode. (For use with the 32”, 40” and 43”models only).
Noise Reduction - Allows you to switch noise reduction ON or OFF. Choose one of the following presets:
low, middle, high and Off.
Active Contrast - Automatically optimises the ‘backlight’ and ‘contrast’ of the picture according to the
brightness of the screen. Choose one of the following presets: low, middle, high and Off.
Gamma - Adjust the tones between the bright and dark parts of the picture. Choose between low,
middle and high.
Red - Adjust red tone of the picture
Green - Adjust green tone of the picture
Blue - Adjust blue tone of the picture
Backlight - Adjust the screen’s brightness by increasing/decreasing the panel’s backlighting
21
Sharp - User Guide - SHA-MAN-0245 - 6351-2K.indd Sec1:21
11/07/2017 14:16:28
TV Menu Operation
SOUND MENU
To access this menu, press [MENU] button on the remote control and scroll right.
To select a sub menu press [OK].
buttons.
If you wish to make changes to any of the default settings, use the scroll
To confirm any settings press [OK] button. To exit this menu at anytime, press [EXIT] button.
Sound Mode - Choose from the following presets
Standard
Default settings
Music
Emphasises music over voices
Movie
Provides live and full sound for movies
Sports
Emphasises sound for sports
Personal
Selects your personal sound settings. Any adjustments made
automatically sets the sound mode to Personal.
EQ - Adjust the audio level of separate frequencies via the band equaliser.
Balance - To switch the sound between the left and right speakers.
Auto Volume Level (AVL) - When ‘on’ is selected, the volume will attempt to stay at a constant level
regardless of TV programme and advertisements.
DTS TruSurround - Choose from the following options:
Off
Off
TruSurround
TruSurroundTM creates an immersive, feature-rich surround sound experience
from two speakers, complete with rich bass, high frequency detail and clear dialog
For DTS patents, see http://patents.dts.com. Manufactured under license from
DTS Licensing Limited. DTS, the Symbol, & DTS and the Symbol together are
registered trademarks. DTS TruSurround is a trademark of DTS, Inc. © DTS, Inc.
All Rights Reserved.
22
Sharp - User Guide - SHA-MAN-0245 - 6351-2K.indd Sec1:22
11/07/2017 14:16:29
TV Menu Operation
SOUND MENU
To access this menu, press [MENU] button on the remote control and scroll right.
To select a sub menu press [OK].
buttons.
If you wish to make changes to any of the default settings, use the scroll
To confirm any settings press [OK] button. To exit this menu at anytime, press [EXIT] button.
Digital Output - This is the digital optical audio output. Choose from the following options:
Off
To turn off Digital Output
Auto
Selects the best settings automatically
PCM
Select this option if you are connecting to a Stereo Hi-fi via optical cable (Pulse-code
modulation (PCM) is a digital representation of an analogue signal)
Audio Description - This allows the user to switch Audio Description ON or OFF. (Audio Description is
a service available on certain programmes. It provides a description of what is happening during the
selected programme for a person who is visually impaired).
AD Volume - This allows the user to increase and decrease the AD (Audio Description) volume level.
Audio Track - This allows the user to change the audio language.
Audio Delay - Enables the user to adjust setting to sync picture and audio.
SPDIF Delay - Enables the user to adjust sound setting to sync picture and audio for external speakers
connected via digital audio output.
Tip: Equaliser settings can only be adjusted when the sound mode ‘Personal’ is selected.
23
Sharp - User Guide - SHA-MAN-0245 - 6351-2K.indd Sec1:23
11/07/2017 14:16:29
TV Menu Operation
CHANNEL MENU
Auto Tuning - Allows you to retune the television for all digital channels, digital radio stations and
analogue devices.
Analogue Manual Tuning - Allows you to manually tune your analogue signal.
Freeview/Saorview Manual Tuning* - Allows you to manually tune your digital signal.
Freeview SMART Retune - This feature allows you to scan for Freeview channels. When new channels are
found they are automatically added to your channel list without removing any channels or affecting your
favourites list.
Channel Edit - Allows you to delete, move, skip and select favourite channels.
Important: To receive Freeview/Saorview channels, in particular
HD channels, you will need a Digital TV aerial and be in a good
Freeview/Saorview coverage area. You can check the coverage
for your area at www.freeview.co.uk or www.saorview.ie
Please note that any Freeview HD channels found during tuning
will be placed in channel positions above 100.
For example, 101 (BBC1 HD) 102 (BBC2 HD) etc.
*Freeview channels are only available in the UK, Saorview
channels are only available in the ROI.
Signal Information - Allows you to view signal frequency, signal quality and signal strength.
CI Information - Pay per view services require a “smartcard” to be inserted into the TV. If you subscribe to
a pay per view service the provider will issue you with a ‘CAM’ and a “smartcard”. The CAM can then be
inserted into the COMMON INTERFACE PORT (CI Card In).
Schedule List - Lists your programme reminders.
Recorded List - Shows a list of recorded TV programmes via a connected USB memory stick or USB
hard drive.
Software Update (OAD) - Switch on/off OAD (over air download) software updates.
OAD Scan - Scan for (over air download) software updates.
Tip: If you do not press any buttons for 30 seconds, the menu will automatically exit. You can change
the length of time before the menu exits automatically - see ‘OSD Timer’ in the Time Menu
24
Sharp - User Guide - SHA-MAN-0245 - 6351-2K.indd Sec1:24
11/07/2017 14:16:29
TV Menu Operation
NETWORK MENU
This menu is part of the ‘Settings’ menu, To access the ‘Settings’ menu, press the [MENU] button on the
remote control, scroll right and select ‘Settings’ by pressing [OK].
If you wish to make changes to any of the default settings, use the scroll
buttons.
To confirm any settings press [OK] button. To exit this menu at anytime, press [EXIT] button.
The Network connection enables you to update the TV software and a number of Smart TV functions.
For the network configuration to work the TV will need to be connected to your home network via an
ethernet cable, with these requirements in place the TV will connect to the network automatically.
Network Configuration - Allows you to select either Cable or Wifi connection.
WIFI / IP Config - Allows you to access LAN network connection settings. Choose from the following options:
Auto
Will automatically connect the TV to your home network(this is the default setting
Manual
Allows you to manually change the IP, Netmask, Gateway and DNS information.
and is highly recommended)
WIFI Config - If WIFI is selected during first time installation process.
Wi-Fi Configuratrion
Wi-Fi Auto Search
Wireless network connection settings
Automatically searches for available wireless networks. Select the desired
Wi–Fi network and then enter the network password (if network is password
protected). Once the password is accepted, you will not be asked for it again.
Network Info - Allows you to view Information about network settings.
Network Test - Allows you to test the network connection.
Wifi Status - Allows you to view information regarding the Wifi/Network connection.
25
Sharp - User Guide - SHA-MAN-0245 - 6351-2K.indd Sec1:25
11/07/2017 14:16:30
TV Menu Operation
TIME MENU
This menu is part of the ‘Settings’ menu, To access the ‘Settings’ menu, press the [MENU] button on the
remote control, scroll right and select ‘Settings’ by pressing [OK].
buttons.
If you wish to make changes to any of the default settings, use the scroll
To confirm any settings press [OK] button. To exit this menu at anytime, press [EXIT] button.
Auto Sync - Automatically sets the time and date on the TV set. Requires the TV to be tuned in with a
digital signal and/or an internet connection. Turn “Auto Sync” off to manually adjust the time and date
settings. If “Auto Sync” is set to off with the time and date manually adjusted, this information will be
reset when the power to the TV is disconnected.
Clock - Shows the date and time. Can be adjusted when “Auto Sync” is set to off.
Off Time - Allows you to set a specific time for your TV to turn off.
On Time - Allows you to set a specific time for your TV to turn on, the channel it will then display, the
source it will be on and also the volume. This function can then be toggled to repeat every day or
a certain day.
Sleep Timer - Lets you set the sleep timer so the television automatically switches off after a set amount
of time. Off -> 10min -> 20min -> 30min -> 60min -> 90min -> 120min -> 180min -> 240min.
OSD Timer - Lets you adjust the amount of time the On Screen Menu stays on the screen
before disappearing. Off -> 5secs -> 15secs -> 30secs -> 60secs.
Auto standby - Set ‘Auto Standby’ to OFF, 3 hours, 4 hours or 5 hours.
Time Zone - Change your current time zone.
26
Sharp - User Guide - SHA-MAN-0245 - 6351-2K.indd Sec1:26
11/07/2017 14:16:30
TV Menu Operation
LOCK MENU
This menu is part of the ‘Settings’ menu, To access the ‘Settings’ menu, press the [MENU] button on the
remote control, scroll right and select ‘Settings’ by pressing [OK].
buttons.
If you wish to make changes to any of the default settings, use the scroll
To confirm any settings press [OK] button. To exit this menu at anytime, press [EXIT] button.
System/Hotel Lock - Allows you to lock or unlock the menu. You will be asked to enter a 4 digit password
Use the ◄ button to quit the password input or use the ► button to clear. Default password is 0000.
Change Password - Allows you to change the password.
Channel Lock - Allows you to lock certain channels manually.
Parental Guidance - Allows you to set the rating to block certain content based on age information
Default Source - Allows the user to set the default source. The default source is the source the TV starts on
when first switched on.
Default Channel - Allows the user to set a channel as the default channel on the Digital source. The
default channel is the channel the TV starts on when first switched on.
Max Volume - Allows you to adjust and set the maximum volume.
Source Lock - Allows you to lock the source menu.
27
Sharp - User Guide - SHA-MAN-0245 - 6351-2K.indd Sec1:27
11/07/2017 14:16:30
TV Menu Operation
SETUP MENU
Language - Allows you to change the language of the menu.
Audio Language - Select your preferred primary audio language.
Audio Language 2 - Select your preferred secondary audio language.
Subtitle Language - Select your preferred primary subtitle language.
Subtitle Language 2 - Select your preferred secondary subtitle language.
Hearing Impaired - This allows the user to turn on the Hearing Impaired function, this produces subtitles
on the screen which provide a description of what is happening during the selected program.
Blue Screen - Changes the background when there is no input between clear and a blue background
(only available on some sources).
PVR File System - Allows you to view the format and performance of a USB key.
First Time Installation - Allows you to access the First Time Installation menu and retune the TV set.
Software Update (USB) - Allows you to update your TV with the newest software using a USB memory
stick. Software and instructions are available on our website.
Software Update (NET) - Allows you to update your TV with the newest software via your internet
connection.
Reset TV - This resets the menus to factory settings and clears all the TV channels from the television.
HDMI CEC (Consumer Electronic Control) - Allows HDMI devices to control each other and allows the user
to operate multiple devices with one remote control (only available with compatible devices).
LED Status - LED Status - Allows the user to switch the LED power indicator light ON or OFF when the TV
is being operated.(When this option is set to OFF the LED power indicator light will flash when the remote
control is used and will flash red during the normal start up process).
Standby Scan - When the TV is put into standby mode a standby scan will be performed, during this
process the TV will scan for new channel information and automatically update the channel list if any
changes are found, both the visual and audio functions will be off, once the scan is complete the TV will
stay in standby mode.
Version Info - Allows you to view the version/information of the software installed on the TV set.
Note: For further support with software updates, contact our technical support team or refer to the
‘product support’ section of the website. If the TV is using the newest software available it will not
attempt to update the software.
28
Sharp - User Guide - SHA-MAN-0245 - 6351-2K.indd Sec1:28
11/07/2017 14:16:30
TV Menu Operation
MORE APPS MENU
To access this menu, press [MENU] button on the remote control and scroll right.
To select a sub menu press [OK].
buttons.
If you wish to make changes to any of the default settings, use the scroll
To confirm any settings press [OK] button.
To exit this menu at anytime, press the ‘MENU’, ‘EXIT’ or ‘BACK’ button on the remote control.
As well as the Netflix, BBC iPlayer and YouTube apps included in the main menu, the More Apps menu,
located at the bottom of the screen, allows you to access more the TV set’s “SMART” features such as
BBC News, BBC Sport etc.
Aquos Net+
Aquos Net+ is a portal to a variety of apps and multimedia which the TV acesses via the internet.
To enter Aquos Net+ you will be prompted to enter a language and acccept terms and conditons. once
the relevant information has been entered you will be able to use a range of features such as MUZU.TV,
Viewster and Dailymotion.
Content is updated and managed from a central source, so look out for new features and updates.
Note: If you wish to reset the settings for AQUOS NET+ Smart Portal back to the default settings, you
will need to access the AQUOS NET+ Smart Portal and enter the settings menu. In the settings menu
scroll down and select ‘reset your device’, you will then be asked ‘Yes’ or ‘No’ to confirm your decision,
highlight ‘Yes’ and press ‘OK’ on the remote control to complete the reset process.
29
Sharp - User Guide - SHA-MAN-0245 - 6351-2K.indd Sec1:29
11/07/2017 14:16:30
TV Menu Operation
MORE APPS MENU
Applications
BBC iPlayer - Catch up on your favourite BBC TV programmes and view exclusive content.
BBC News - Access the BBC News app for up-to-the-minute and breaking news reports.
BBC Sport - The BBC Sport app offers the latest sports news, live action, scores and highlights..
Weather - keep track of the weather by using the weather forecasting app, AccuWeather.
Web Browser - Application for accessing websites via the internet. Use the following buttons for
navigation in the browser:
CH+
Scroll page up,
CH-
Scroll page down,
Red Button
Show/hide browser menu bar
Yellow Button
Zoom in
Blue Button
Zoom out
Note: The Netflix and YouTube apps are
included within the main menu for quicker
access, they are not included in the “More
Apps”menu.
MEDIA MENU
Miracast (Screen mirroring)
The Miracast (screen mirroring) feature allows you to connect to a compatible external device such as a
tablet and/or smartphone. Once connected, your device will mirror all its content on to the TV,
this allows you to view photos, emails and allows almost unlimited applications including many video
on demand and subscription based services, for example Blinkbox, Netflix and Amazon, to be played on
your smartphone or tablet and at the same time wirelessly ‘streamed’ and viewed on the TV.
Many Android and Windows devices include ‘Screen Mirroring’ as standard. Apple devices do not
currently allow it, however, it is possible to ‘mirror’ from your Apple smart phone or IPad etc. when
used with an Apple TV box (available separately).
Note: If your smartphone or tablet does not include ‘Mirroring’, it may be possible to connect a suitable
cable from your device directly to one of the HDMI inputs on the rear of the TV (for example, if your
device supports video output and has a Micro USB socket, you can purchase a Micro USB to HDMI cable
from your retailer).
30
Sharp - User Guide - SHA-MAN-0245 - 6351-2K.indd Sec1:30
11/07/2017 14:16:31
TV Menu Operation
MEDIA MENU
USB mode and media server
The USB media and the media server offer the playback of various different types of content that is
either saved on your USB memory stick or external media server. (USB mode allows you to view/playback
files from an external USB device and Media Server connects to your home network and can view/playback
files from your laptop, PC, tablets and smart phones).
When accessing the USB media or media server features the below menu screen will appear. The content
will be divided into Photo, Music, Movie and All.
1) You can navigate through the menus using the
buttons on the remote control,
scroll
to confirm the item you wish to play/view press the
[OK] button.
2) USB mode - Select the USB drive (If your drive
only has 1 partition you will only see 1 item)
Media server - Select the external device
that you would like to access.
3) You can now access the item. Press OK to view.
4) Whilst viewing your media, you can control
the item by using the remote control buttons
(below) or by pressing (Info) to access the
on-screen playback menu, you can now make
and (OK)
your selection by using the
buttons on the remote control.
Fig.A
Tip: If you experience a playback issue, please ensure the files being used are the correct format (example - the picture
plays but no sound) See technical specification page for compatible file types
Note: USB extension cables are not recommended as they can cause a reduction in picture/audio quality and stoppages
during play back of USB content.
31
Sharp - User Guide - SHA-MAN-0245 - 6351-2K.indd Sec1:31
11/07/2017 14:16:31
7 Day TV Guide and Channel List
7 DAY TV GUIDE
TV Guide is available in Saorview/Freeview TV mode. It provides information about forthcoming
programmes (where supported by the Saorview/Freeview channel). You can view the start and end
time of all programmes and on all channels for the next 7 days and set reminders.
1) Press [TV GUIDE] on the remote control, the following 7 Day TV Guide will appear.
2) Navigate through the menu using
.
You can now:
Record a programme by pressing RED (USB device must be connected)
Set a reminder by pressing GREEN
View a previous day by pressing YELLOW
View the next day by pressing BLUE
3) Press [EXIT] to exit the 7 day TV Guide
Channel List
To view the channel list, please ensure that the TV is set to either the analogue or digital source and
no menus or TV notifications are displayed.
1) Press [OK] on the remote control and the
channel list menu will appear.
2) Press LEFT / RIGHT arrow to filter desired channel types (Digital TV,
HD channels, Radio, Data, All).
3) Scroll through the channel list by using
buttons then
press [OK] to view the channel that is currently highlighted.
4) Press [EXIT] to exit the channel list.
32
Sharp - User Guide - SHA-MAN-0245 - 6351-2K.indd Sec1:32
11/07/2017 14:16:31
USB Record
USB RECORD - FREEVIEW/SOARVIEW MODE
USB RECORD – FREEVIEW/SAORVIEW MODE
Built into this television is a USB record facility. This function is available in Freeview/Soarview mode
when used in conjunction with a compatible USB memory stick or USB hard drive. The benefits of this are as
follows:
• Pause live TV and then playback, fast forward and rewind (up to live TV)
• One button record, if you decide you want to record the current programme
• Easy programmable recording from the 7 day TV Guide
Due to the nature of the product, it is necessary to use a high speed USB memory stick (as the TV reads
from and writes to the memory stick at the same time, some memory sticks may not be suitable).
You can purchase high speed memory sticks from some computer stores, alternatively, we have a selection
of tested and compatible memory sticks available to purchase directly from the helpline/web site.
Recommended Minimum Specification - USB Memory Stick
Read Speed
20 Mb/s (MegaBit Per Second)
Write Speed
6 Mb/s (MegaBit Per Second)
If you wish to use a USB portable hard drive
larger than 32GB, please refer to the FAQ
section at the rear of this user guide.
Pause Live TV (Time Shift)
Pausing Live TV is very simple.
- Press the play/pause button and the television will pause and the live
content will be recorded. To resume watching press play/pause again.
- Press fast forward to go forward in a recording (i.e. to skip adverts).
- Press fast rewind to go back in a recording (i.e. if you fast forwarded
too far).
Tip: When you switch the TV to standby or change channel the Time Shift memory is wiped. To restart
time shift you must press play/pause button.
One Button Record
At any point in time you may decide to record the current programme that you are watching. To do this
you need to press the red button highlighted below.
Playback files from Record list
To playback recorded files you will be required to have the TV set to the Freeview/Saorview source mode.
Once set to the correct source, access the recorded list by pressing the REC LIST (Recorded List) button on
the remote control, the recorded list should now appear on the screen, press OK on the chosen file to start.
Tip: This television contains one TV tuner, therefore it can only record the channel you are watching or
record one channel while the television is in standby mode.
Note: USB record function is only available in Digital/Freeview TV mode. Due to copyright laws and
illegal copying/recording it is not possible to record to/from any other input/output source.
33
Sharp - User Guide - SHA-MAN-0245 - 6351-2K.indd Sec1:33
11/07/2017 14:16:31
General Information
FREQUENTLY ASKED QUESTIONS
General
I would like to have louder
sound by connecting additional
speakers. For TV models with
digital optical audio output.
1) Use the 3.5mm headphone output and a 3.5mm to phono cable (available
separately) to connect to an amplifier/surround sound system. Please note this
will deactivate the TV’s built in speakers.
2) Connect a digital optical audio cable from the TV’s digital optical audio output
to your amplifier/surround systems digital optical audio input.
General
Why are some options in the menu
unavailable and greyed out.
Some options are only available in certain sources, i.e. HDMI. They are
unavailable in the other sources where they have no affect.
General
Can I stop my TV automatically
turning off after 4hrs?
Yes, in the ‘Time’ menu settings, scroll down to Auto standby and select OFF.
TV
I have tuned in Digital TV but I
am not receiving any or all of the
channels and/or the channels I
receive are breaking up.
1) Check you are in an area that can receive Freeview/Saorview, visit www.freeview.co.uk or
www.saorview.ie
2) Check you are using an aerial that is able to receive a good digital signal. In most cases,
you will need an outdoor digital hi-gain/wideband aerial. In areas that have excellent
digital coverage, you may be able to use a loft type aerial but it is highly likely that you will
also need to connect a booster between the back of the TV and the TV aerial wall socket.
Unfortunately, to receive a good enough digital signal, it is not possible to use a portable/
indoor type aerial.
TV
I have re-tuned my television but
when I switch it off it is not storing
the channels.
If the TV does not save the channels when you power it off, it’s likely the channel database
has become corrupt.
1) Turn off the TV.
2) Remove the RF/Aerial cable from the rear of the TV and then turn the TV back on again.
3) Using the remote control, press Menu followed by 8-8-8-8 to enter the initial setup/first
time installation menu.
4) Press OK (let the TV run the full tuning process).
5) Once completed, turn off the TV, reconnect the RF/Aerial cable then turn the TV back on
again.
6) Repeat steps 3 & 4.
VCR/DVD
Recorder
I have connected the TV to my VCR
or DVD Recorder via SCART but it is
not recording.
In addition to connecting via SCART, you should connect the aerial cable from the wall
socket to your VCR/DVD Recorder and another aerial cable from the VCR/DVD Recorder to
the TV.
Game Consoles
I have connected my Playstation/
Xbox to the TV via HDMI, but I am
not receiving any pictures or sound
on my TV
1) Ensure the TVs’ source is set to HDMI.
2) Check your settings on your Playstation/Xbox are as per the Playstation/Xbox
instruction manual.
Game Consoles
I have connected my Playstation/
Xbox to the TV via Component
cables (red, green & blue) but I am
not receiving any sound.
Component cables only provide HD pictures. For the sound you will need to connect the
red & white audio cables on the Playstation/Xbox to the red & white phono inputs (or mini
AV input where fitted) on the rear of the TV. Please refer to the ‘Connections’ pages.
System Lock
I have changed the password
on the television and now
forgotten it.
There is a master password of 4711, to gain access to the TV menu and reset the
normal password.
USB Mode
I have inserted a USB Memory Key,
but the TV does not recognise it.
Ensure the USB Memory Key is formatted to type FAT32.
USB Mode
Using a USB portable hard drive /
larger than 32GB.
If you wish to use a portable hard drive larger than 32GB, please note that it must be
formatted to the FAT32 file system in order to operate on this TV. Windows XP/Vista
computers are only capable of formatting up to 32GB, therefore, you will need a software
programme/utility to format larger hard drives.
Please refer to the website, www.umc-uk.co.uk, for more information.
USB Record
I cannot change the channel, access
the menu or use the red button.
During time shift you cannot change the channel, access the menu or use the red button.
USB Record
When using the USB to record the
picture ‘breaks up’ or experience
loss of sound.
Check the USB memory stick meets the minimum read speed requirements. Standard
definition channels require a read speed of 20 MB/s (Mega Byte per second) and a write
Speed of 6 MB/s (Mega Byte per second) HD channels require the read speed of 80 MB/s
(Mega Byte per second) and a write speed of 40 MB/s (Mega Byte per second). USB 3.0 sticks
should normally ne used where possible.
34
Sharp - User Guide - SHA-MAN-0245 - 6351-2K.indd Sec1:34
11/07/2017 14:16:32
General Information
FREQUENTLY ASKED QUESTIONS
Freeview HD
I cannot access all Freeview
channels.
Some data channels for Freeview can only be obtained when the TV ‘s ethernet port is
connected to your router.
Freeview HD
I cannot find the Freeview HD
channels.
Freeview HD channels found during tuning will be placed in channel positions above 100.
For example, 101 (BBC1 HD), 102 (BBC2 HD) etc.
Smart
I cannot access Smart apps on my
Sharp Smart TV.
Check your TV is connected to the internet and there is suitable signal strength.
You can carry out a Network Test as follows:
1) Press Menu on the remote control.
2) Select ‘Network’ Menu then ‘Network Test’.
3) This will show the status of the internet connection.
If you have no internet connection you must re-connect your TV as follows:
1) Press Menu on the remote control.
2) Select ‘Network’ Menu then ‘Wi-fi config’.
3) Then ‘Wifi Auto Search’.
4) The TV will then automatically search for Networks.
5) Select the desired network then enter the Network password.
6) The TV will then connect.
Note: An icon will appear in the top right hand side of the Application page to show you if
the TV is connected to the internet.
Smart
I cannot access content through the
Media Server settings
Check your TV is connected to your local network and there is suitable signal strength.
Check the server devices you are trying to connect with are also on the Network and are set
to share content.
Smart
I cannot access content through the
Wireless Connection settings
Ensure the device you are trying to mirror onto the TV is correctly paired with the TV.
Check the settings on the device, move your device closer to the TV set, check the user
guide of the device to ensure it is compatible with this function.
Smart
While using Media Server, access is
not possible or connection is slow
If the folder you are attempting to view contains a large amount of files, it may take a little
while to load, this is normal, content may be blocked on the host PC. Reconfigure the host
PC to allow external access.
Note: Host may not be connected to your network.
Smart
I cannot access Facebook or Twitter
Ensure that you have an active account and that your network is not blocking access to
these sites.
Smart
The YouTube app does not work
and/or is erratic
The Youtube app requires the TV to be set with the correct date and time, please see
the ‘Time Menu’ page for further instructions. Ensure your network is not blocking access
to YouTube and the speed of your internet connection is fast enough for viewing
YouTube content.
Pairing the
remote control
Remote control does not work
with the TV set when first time
installation is on the TV screen
During first time installation press and hold the YELLOW and BLUE buttons on the remote
control for a few seconds. The power light will blink 5 times to confirm the TV and remote
control are paired.
Pairing the
remote control
Remote control does not power on
the TV set
Switch the TV on using the standby button on the TV set (not the remote control), once
switched on, press the standby button on the TV set once, this will prompt the ‘pairing
menu’ to appear, scroll through and highlight ‘Pair your remote’ by pressing the CH+/CH- TV
button (scroll up/down function in the menu) then press the TV set’s standby button (OK
function in the menu) to confirm your selection, then with the remote control, press and
hold the YELLOW and BLUE buttons for a few seconds, the power light will blink 5 times to
confirm the TV and remote control are paired.
35
Sharp - User Guide - SHA-MAN-0245 - 6351-2K.indd Sec1:35
11/07/2017 14:16:32
General Information
TECHNICAL SPECIFICATION
Product fiche
Trademark
Model ID
Energy efficiency class
Visible screen size (diagonal)
On-mode power consumption
Sharp
LC-32CHG6351K
LC-32CHG6352K
A+
81 cm / 32 inches
31.0 W
Annual energy consumption *1
45 kWh
Standby power consumption *2
<0.50 W
Off mode power consumption
Screen resolution
n/a
1366 (H) x 768 (V)
*1: Energy consumption XYZ kWh per year, based on the power consumption of the television
operating 4 hours per day for 365 days. The actual energy consumption will depend on how the
television is used.
*2: When the TV is turned off with the remote control/standby button and no function is active.
Additional technical information
RF
Inputs
Sound Outputs
75 ohm Antenna / Analog / DVB / Satellite*
3 x HDMI, 2 x USB, 1 x SCART,
1 x RJ45 LAN/Ethernet, 1 x Mini Component/YPbPr,
1 x Mini AV IN - Composite Video/CVBS and L/R Audio
shared for Composite Video and Component/YPbPr,
1 x VGA/PC, 1 x 3.5mm jack for PC audio input
1 x Digital Optical Audio output, 1 x 3.5mm Headphone
Speaker** / Amplifier Watts (RMS)
2 x 10 / 2 x 8
Voltage and power consumption
AC 220V ~ 240V; 50Hz
31/45/70W (home mode/standard/max)
(<0.5W in Standby)
Dimensions including stand (mm)
Net weight (Kgs)
Wall Mounting
728W x 467H x 160D
5
VESA 400 x 200 (mm)
*Satellite input is for the LC-32CHG6352K model only.
**Built-in Harman Kardon speaker systems (Full-range speaker and tweeter).
36
Sharp - User Guide - SHA-MAN-0245 - 6351-2K.indd Sec1:36
11/07/2017 14:16:32
General Information
TECHNICAL SPECIFICATION
Product fiche
Trademark
Model ID
Energy efficiency class
Visible screen size (diagonal)
On-mode power consumption
Sharp
LC-32CFG6351K
LC-32CFG6352K
A+
81 cm / 32 inches
31.0 W
Annual energy consumption *1
45 kWh
Standby power consumption *2
<0.50 W
Off mode power consumption
Screen resolution
n/a
1920 (H) x 1080 (V)
*1: Energy consumption XYZ kWh per year, based on the power consumption of the television
operating 4 hours per day for 365 days. The actual energy consumption will depend on how the
television is used.
*2: When the TV is turned off with the remote control/standby button and no function is active.
Additional technical information
RF
Inputs
Sound Outputs
75 ohm Antenna / Analog / DVB / Satellite*
3 x HDMI, 2 x USB, 1 x SCART,
1 x RJ45 LAN/Ethernet, 1 x Mini Component/YPbPr,
1 x Mini AV IN - Composite Video/CVBS and L/R Audio
shared for Composite Video and Component/YPbPr,
1 x VGA/PC, 1 x 3.5mm jack for PC audio input
1 x Digital Optical Audio output, 1 x 3.5mm Headphone
Speaker** / Amplifier Watts (RMS)
2 x 10 / 2 x 8
Voltage and power consumption
AC 220V ~ 240V; 50Hz
31/45/70W (home mode/standard/max)
(<0.5W in Standby)
Dimensions including stand (mm)
Net weight (Kgs)
Wall Mounting
728W x 467H x 160D
5
VESA 400 x 200 (mm)
*Satellite input is for the LC-32CFG6352K model only.
**Built-in Harman Kardon speaker systems (Full-range speaker and tweeter).
37
Sharp - User Guide - SHA-MAN-0245 - 6351-2K.indd Sec1:37
11/07/2017 14:16:32
General Information
TECHNICAL SPECIFICATION
Product fiche
Trademark
Model ID
Energy efficiency class
Visible screen size (diagonal)
On-mode power consumption
Sharp
LC-40CFG6351K
LC-40CFG6352K
A+
102 cm / 40 inches
45.0 W
Annual energy consumption *1
66 kWh
Standby power consumption *2
<0.50 W
Off mode power consumption
Screen resolution
n/a
1920 (H) x 1080 (V)
*1: Energy consumption XYZ kWh per year, based on the power consumption of the television
operating 4 hours per day for 365 days. The actual energy consumption will depend on how the
television is used.
*2: When the TV is turned off with the remote control/standby button and no function is active.
Additional technical information
RF
Inputs
Sound Outputs
75 ohm Antenna / Analog / DVB / Satellite*
3 x HDMI, 2 x USB, 1 x SCART,
1 x RJ45 LAN/Ethernet, 1 x Mini Component/YPbPr,
1 x Mini AV IN - Composite Video/CVBS and L/R Audio
shared for Composite Video and Component/YPbPr,
1 x VGA/PC, 1 x 3.5mm jack for PC audio input
1 x Digital Optical Audio output, 1 x 3.5mm Headphone
Speaker** / Amplifier Watts (RMS)
2 x 10 / 2 x 8
Voltage and power consumption
AC 220V ~ 240V; 50Hz
45/65/80W (home mode/standard/max)
(<0.5W in Standby)
Dimensions including stand (mm)
Net weight (Kgs)
Wall Mounting
917W x 570H x 186D
7.7
VESA 400 x 200 (mm)
*Satellite input is for the LC-40CFG6352K model only.
**Built-in Harman Kardon speaker systems (Full-range speaker and tweeter).
38
Sharp - User Guide - SHA-MAN-0245 - 6351-2K.indd Sec1:38
11/07/2017 14:16:32
General Information
TECHNICAL SPECIFICATION
Product fiche
Trademark
Model ID
Energy efficiency class
Visible screen size (diagonal)
On-mode power consumption
Sharp
LC-43CFG6351K
LC-43CFG6352K
A+
109 cm / 43 inches
50.0 W
Annual energy consumption *1
73 kWh
Standby power consumption *2
<0.50 W
Off mode power consumption
Screen resolution
n/a
1920 (H) x 1080 (V)
*1: Energy consumption XYZ kWh per year, based on the power consumption of the television
operating 4 hours per day for 365 days. The actual energy consumption will depend on how the
television is used.
*2: When the TV is turned off with the remote control/standby button and no function is active.
Additional technical information
RF
Inputs
Sound Outputs
75 ohm Antenna / Analog / DVB / Satellite*
3 x HDMI, 2 x USB, 1 x SCART,
1 x RJ45 LAN/Ethernet, 1 x Mini Component/YPbPr,
1 x Mini AV IN - Composite Video/CVBS and L/R Audio
shared for Composite Video and Component/YPbPr,
1 x VGA/PC, 1 x 3.5mm jack for PC audio input
1 x Digital Optical Audio output, 1 x 3.5mm Headphone
Speaker** / Amplifier Watts (RMS)
2 x 10 / 2 x 8
Voltage and power consumption
AC 220V ~ 240V; 50Hz
50/60/75W (home mode/standard/max)
(<0.5W in Standby)
Dimensions including stand (mm)
Net weight (Kgs)
Wall Mounting
966W x 595H x 186D
7.9
VESA 400 x 200 (mm)
*Satellite input is for the LC-43CFG6352K model only.
**Built-in Harman Kardon speaker systems (Full-range speaker and tweeter).
39
Sharp - User Guide - SHA-MAN-0245 - 6351-2K.indd Sec1:39
11/07/2017 14:16:32
General Information
TECHNICAL SPECIFICATION
Product fiche
Trademark
Model ID
Energy efficiency class
Visible screen size (diagonal)
Sharp
LC-49CFG6351K
LC-49CFG6352K
A+
123 cm / 49 inches
On-mode power consumption
67.0 W
Annual energy consumption *1
98 kWh
Standby power consumption *2
<0.50 W
Off mode power consumption
Screen resolution
n/a
1920 (H) x 1080 (V)
*1: Energy consumption XYZ kWh per year, based on the power consumption of the television
operating 4 hours per day for 365 days. The actual energy consumption will depend on how the
television is used.
*2: When the TV is turned off with the remote control/standby button and no function is active.
Additional technical information
RF
Inputs
Sound Outputs
75 ohm Antenna / Analog / DVB / Satellite*
3 x HDMI, 2 x USB, 1 x SCART, 1 x SD Card IN,
1 x RJ45 LAN/Ethernet,1 x Mini Component/YPbPr IN,
1 x Mini AV IN - Composite Video/CVBS and L/R Audio
shared for Composite Video and Component/YPbPr
1 x Digital Optical Audio output, 1 x 3.5mm Headphone
Speaker* / Amplifier Watts (RMS)
2 x 10 / 2 x 8
Voltage and power consumption
AC 220V ~ 240V; 50Hz
67/95/110W (home mode/standard/max)
(<0.5W in Standby)
Dimensions including stand (mm)
Net weight (Kgs)
Wall Mounting
1099W x 668H x 224D
11.7
VESA 600 x 300 (mm)
*Satellite input is for the LC-49CFG6352K model only.
**Built-in Harman Kardon speaker systems (Full-range speaker and tweeter).
40
Sharp - User Guide - SHA-MAN-0245 - 6351-2K.indd Sec1:40
11/07/2017 14:16:32
General Information
TECHNICAL SPECIFICATION
Product fiche
Trademark
Model ID
Energy efficiency class
Visible screen size (diagonal)
Sharp
LC-55CFG6351K
LC-55CFG6352K
A+
139 cm / 55 inches
On-mode power consumption
85.0 W
Annual energy consumption *1
124 kWh
Standby power consumption *2
<0.50 W
Off mode power consumption
Screen resolution
n/a
1920 (H) x 1080 (V)
*1: Energy consumption XYZ kWh per year, based on the power consumption of the television
operating 4 hours per day for 365 days. The actual energy consumption will depend on how the
television is used.
*2: When the TV is turned off with the remote control/standby button and no function is active.
Additional Technical Information
RF
Inputs
Sound Outputs
Speaker* / Amplifier Watts (RMS) / Subwoofer
Voltage and power consumption
Dimensions including stand (mm)
Net weight (Kgs)
Wall Mounting
75 ohm Antenna / Analog / DVB / Satellite*
3 x HDMI, 2 x USB, 1 x SCART, 1 x SD Card IN,
1 x RJ45 LAN/Ethernet, 1 x Mini Component/YPbPr IN,
1 x Mini AV IN - Composite Video/CVBS and L/R Audio
shared for Composite Video and Component/YPbPr
1 x Digital Optical Audio output, 1 x 3.5mm Headphone
2 x 10 / 2 x 8 / 15W
AC 220V ~ 240V; 50Hz
85/110/150W (home mode/standard/max)
(<0.5W in Standby)
1238W x 750H x 223D
14.2
VESA 600 x 300 (mm)
*Satellite input is for the LC-55CFG6352K model only.
**Built-in Harman Kardon speaker systems (Full-range speaker and tweeter).
41
Sharp - User Guide - SHA-MAN-0245 - 6351-2K.indd Sec1:41
11/07/2017 14:16:32
General Information
TECHNICAL SPECIFICATION
Compatible files in USB Mode
Media
Codec
MPEG1/2
Film
Media
Resolution
Bit Rate
File Extension
1080P@60fps
40Mbps
.DAT, .VOB, .MPG, .MPEG,.ts, .trp, .tp, .mp4, .mov,
.3gpp, .3gp, .avi, .mkv, .asf
MPEG4
1080P@60fps
40Mbps
.MPG, .MPEG, .mp4, .mov, .3gpp, .3gp, .avi, .mkv, .asf
XviD
1080P@60fps
40Mbps
.mp4, .mov, .avi, .mkv, .asf
Sorenson H.263
1080P@60fps
40Mbps
H.263
1080P@60fps
40Mbps
H.264
1080P@60fps
80Mbps
HEVC/H.265
2048x1088@60fps
30Mbps
.mp4, .mkv
AVS
1080P@60fps
40Mbps
.ts, .trp, .tp
AVS+
1080P@60fps
50Mbps
.ts, .trp, .tp
VC1
1080P@60fps
40Mbps
.wmv
.3gpp, .3gp
Motion JPEG
640x480@30fps
10Mbps
.mov, .avi, .mkv
VP8
1080P@30fps
20Mbps
.mkv, .webm
VP9
2048x1088@60fps
30Mbps
.mkv, .webm
Codec
Frequency
Bit Rate
File Extension
MPEG1/2 Layer1,
2, 3
16KHz ~ 48KHz
Layer1 32Kbps ~ 448Kbps .avi, .asf, .mkv, .ts, .trp, .tp, .DAT, .VOB, .MPG,
Layer2 8Kbps ~ 384Kbps
Layer3 8Kbps ~ 320Kbps .swf, .m4a)
AC3
32KHz, 44.1KHz,
48KHz
32Kbps ~ 640Kbps
.ac3, .avi, .mkv, .3gpp, .3gp, .mp4, .mov,
m4a, .ts, .trp, .tp, .DAT, .VOB, .MPG, .MPEG
EAC3
32KHz, 44.1KHz,
48KHz
32Kbps ~ 640Mbps
.ec3, .3gpp, .3gp, .mp4, .mov, m4a, .ts, .trp, .tp,
.DAT, .VOB, .MPG, .MPEG
HEAAC
8KHz ~ 48KHz
VORBIS
Up to 48KHz
.mkv, .webm, .3gpp, .3gp, .mp4, .mov, m4a, .ogg
LPCM
8KHz ~ 48KHz
64Kbps ~ 1.5Mbps
.avi, .mkv, .3gpp, .3pg, .mp4, .mov, .ts, .trp, .tp,
.DAT, .VOB, .MPG, .MPEG, .wav, .m4a
LBR(cook)
8KHz, 11.025KHz, 22.05KHz,
44.1KHz
64Kbps ~ 128Kbps
.rm, .rmvb
FLAC
8KHz ~ 96KHz
< 1.6Mbps
DRA
8KHz ~ 48KHz
< 512Kbps
File Type
Resolution
.aac, .avi, .mkv, .3gpp, .3gp, .mp4, .mov, m4a, .ts,
Music
Media
JPEG
Photo
Internal Subtitle
External
Subtitle
PNG
.ts, .trp
File Extension
15360x8640, (1920x8 x 1080x8)
Base-line
1024x768
Progressive
9600x6400
Non-interlace
1200x800
Interlace
.jpg/.jpeg
.png
BMP
9600x6400
.bmp
GIF
6400x4800 (800x8 x 600x8)
.gif
File Extension
Container
Subtitle Codec
mp4
MP4
DVD Subtitle, UTF-8 Plain Text
mkv
MKV
ASS, SSA, UTF-8 Plain Text, VobSub, DVD Subtitle
avi
AVI(1.0, 2.0)
XSUB, XSUB+
File Extension
Subtitle Parser
Remark
.srt
SubRip
.ssa/ .ass
SubStation Alpha
.smi
SAMI
.sub
SubViewer, MicroDVD, DVDSubtitleSystem,
SubIdx(VobSub)
.txt
TMPlayer
SubViewer 1.0 & 2.0 Only
42
Sharp - User Guide - SHA-MAN-0245 - 6351-2K.indd Sec1:42
11/07/2017 14:16:32
Sharp - User Guide - SHA-MAN-0245 - 6351-2K.indd Sec1:43
11/07/2017 14:16:32
UMC Poland sp. z o.o.
Ostaszewo 57B, 87-148 Łysomice,
Poland
Assembled in Europe
www.sharp.eu
SHA/MAN/0245
Sharp - User Guide - SHA-MAN-0245 - 6351-2K.indd Sec1:44
11/07/2017 14:16:32
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising