Sharp | LC-32FI5342K | Quick Start Guide | Sharp LC-32FI5442K Full HD Smart LED TV Quick start guide

Sharp LC-32FI5442K Full HD Smart LED TV Quick start guide
24/05/2018 17:11:39
REMOTE CONTROL
Key
For models with integrated DVD players.
For models with PVR Function.
For models with USB Playback.
For models with 3D functions.
1
ON/OFF
1
2
3
ON/OFF - Switch on the TV when in standby or vice versa.
MUTE - Mute the sound or vice versa.
2
NUMBER BUTTONS - 0–9 to select a TV channel directly.
TV GUIDE - Opens the 7 day TV guide (digital TV mode).
- To return to the previous channel viewed.
VOL (+/-) - To increase/decrease the sound level.
PICTURE - Scrolls through picture mode options.
SOUND- Scrolls through sound mode options.
SOURCE - To display the input/source menu.
CH (+/-) - To increase or decrease the channel being watched.
MENU - To display OSD menu.
EXIT - To exit all menus.
( / / / / OK)- Allows you to navigate the on-screen menus and adjust the
system settings to your preference.
BACK - To go back a previous step.
FAV - To display favourites menu.
0
TV
GUIDE
8
7
5
4
2
1
MUTE
LC-32FI5x42K SHA-QSW-0016.indd 1
Sky Remote Code
If you wish to use your Sky remote to operate
the TV’s basic functions, you will need a Sky
remote control (Revision 9 or later) and you
will need to program it with the code 2134. If
you wish to use your Sky Q remote to operate
the TV’s basic functions, you will need to
program it with the code 4170.
3
6
9
What is included in the box
Accessories
Included with this TV are the following accessories
1 x Operating Instructions
1 x Mini composite / AV cable
PICTURE
3
1 x Quick start guide
SOUND
VOL
CH
1 x TV
SOURCE
1 x Mini component / YPbPr cable
4
INFO - Press once for now/next channel information.
- Press twice for information about the current programme.
TEXT - To enter/exit Text.
SUBTITLE - To switch the dialogue at the bottom of the screen (on/off).
TV - To switch to Digital Channels.
YOUTUBE - Access the Youtube App.
NETFLIX - Access the Netflix App.
NET+ - Access the Aquos NET+ Smart Portal.
RECORD/DVD MENU - Access the USB record function/Access the
DVD menu of the DVD inserted (must be set to the DVD source).
REC LIST/DVD SETUP - Opens the list of previously recorded items/Access
the TV’s DVD setup menu (must be set to the DVD source).
EXI T
MEN U
1 x Remote Control and 2 x AAA Batteries
1 x RF cable
OK
1 x SCART to Mini-SCART adapter
BAC K
4
INFO
FAV
TEXT
SUBTITLE
TV
1 x Power Cable
- To restart the current chapter
- To advance forward to the next chapter
- To stop the playback/Eject Disc
(To EJECT the disc press/hold the
NET+
DVD MEN U
button for 4 seconds)
- To play in fast rewind mode
- To play in fast forward mode
- To play/pause
DVD SETU P
1 x Stand installation pack
PVR/MEDIA
REC LIST
GOT O
3D
A-B
4x
REPE AT
GOTO - To go to a specific chapter.
A-B - Press once to set point, press a second time to return to point.
ANGLE/3D - Select different angle of DVD.
REPEAT - To repeat playback.
1 x L (left)
1 x R (right)
Please save your box/packaging as you will need this in the event of warranty/service repair or support.
We are unable to carry out warranty/service if you are unable to package it correctly. The safest way to
package your item in the event of warranty/service repair is in it’s original box/packaging.
Harman Kardon is trademark of HARMAN International Industries, Incorporated,
registered in the United States and/or other countries.
SHA/QSW/0016
*Built-in Harman Kardon speaker systems (Full-range speaker and tweeter).
Wall Mounting
VESA 200 x 200 (mm)
Net weight (Kgs)
5.3
Closed Christmas and New Years day
Speaker* / Amplifier
Watts (RMS)
2 x 10 / 2 x 8
Voltage and power
consumption
AC 220V ~ 240V; 50Hz
31/45/70W (home mode/standard/max)
(<0.5W in Standby)
Dimensions including
stand (mm)
732W x 467H x 160D
Sound Outputs
*Calls to 0330 numbers are charged at standard call rates and are included as part of any bundled minutes with your
phone provider.
Calls to the ROI number are charged at the local call rate.
The telephone opening hours are Monday to Friday 8.30am to 6pm, Saturday 9am – 5pm.
Bank Holidays - 10am to 4pm
1 x Digital Optical Audio output, 1 x 3.5mm Headphone
3 x HDMI, 2 x USB, 1 x Mini-SCART,
1 x RJ45 LAN/Ethernet, 1 x Mini Component/YPbPr,
1 x Mini AV IN - Composite Video/CVBS and L/R Audio shared for Composite Video and
Component/YPbPr
Inputs
RF
75 ohm Antenna / Analog / DVB / Satellite
Please contact the UK & ROI Helpline*
Telephone UK 0330 024 0803 or ROI 01443 3323
Online support at: www.umc-uk.co.uk
Email support at: service@umc-uk.co.uk
Need help setting up or using your TV?
LC-32FI5242K
LC-32FI5342K
LC-32FI5442K
LC-32FI5542K
*1: Energy consumption XYZ kWh per year, based on the power consumption of the television operating 4
hours per day for 365 days. The actual energy consumption will depend on how the television is used.
*2: When the TV is turned off with the remote control/standby button and no function is active.
Screen resolution
Quick & easy guide for setting up your TV
What is included in the box
Using the remote control
Setting up the TV for the first time - including attaching the stand
Connecting other devices to the Television
1920 (H) x 1080 (V)
Off mode power consumption
n/a
On-mode power consumption
31.0 W
Annual energy consumption *1
45 kWh
Standby power consumption *2
<0.50 W
Visible screen size (diagonal)
81 cm / 32 inches
Energy efficiency class
Terms and conditions apply. Online registration only.
nly.
Model Numbers
Register your manufacturers guarantee online within 14 days of purchase at
LC-32FI5242K
LC-32FI5342K
LC-32FI5442K
LC-32FI5542K
www.registertoday.co.uk/sharp
p and enter into a prize draw to
Soundbar
Win a
For information on using the TV’s features, please refer to the operating Instructions.
A+
Quick Start Set Up Guide
LC-32FI5242K
LC-32FI5342K
LC-32FI5442K
LC-32FI5542K
Model ID
Trademark
Sharp
Technical Specification
Setting up the TV set for the first time
1 Fitting the stand
TV panel must be facing downwards.
For the stand installation, there is one type of screw
provided as shown below.
To complete the stand installation you will require a
cross head screw driver.
Place the TV set on a flat and clean surface with the
panel facing downwards to avoid damage.
Back/Shortest
3
4
R
1
2
Front/Longest
1
4x
L
3
2
Place the TV set on a flat and clean surface with
the panel facing downwards to avoid damage.
Used for attaching the stand
to the TV set (fig.2)
Register your manufacturers
guarantee online within
14 days of purchase at
www.registertoday.co.uk/sharp
and enter into a prize draw to
win a Sharp Soundbar
4x
When the stand feet are installed correctly the
stand feet will be longest at the front of the TV
and shortest at the back with the feet pointing
away from each other.
When the stand/feet are in the correct position, secure
the feet to the underside of the TV set using 4 screws
provided.
Terms and conditions apply. Online registration only.
2 Connecting your set
3 Powering On the TV
TV Control Stick
Remote Control: Installing Batteries
To receive Freeview channels, in
particular Freeview HD channels, you
will need a Digital TV aerial and be in a
good Freeview coverage area. You can
check coverage for your postcode at
www.freeview.co.uk.
Outdoor Digital
TV Aerial
1.
2.
1) Connect the TV to your power socket.
2) If you wish to use the TV to receive Freeview/Saorview channels,
connect the RF input from the TV to your outdoor Digital TV aerial.
If you do not wish to receive Freeview/Saorview, skip this step.
TV control stick
Switch on the television by pressing
the TV control stick located on the
TV set.
Insert the batteries supplied into the
remote control and press the standby
button to power on the TV.
Please note that any Freeview HD
channels found during tuning will be
placed in channel positions above 100.
For example, 101 (BBC1 HD) 102 (BBC2
HD) etc.
4 First time installation
Connectivity
L
AV IN
CI CARD IN
YPbPr IN
M
EARPHONE
K
3
1. Languages
2. Country Selection
3. Network setup You can connect the TV to your broadband router or wire-
Select your preferred on screen display language. This will change the language in
which the menus and associated information is displayed in. When set up has been
completed, this can be changed by selecting Menu > Settings > Language
Select the correct flag for the country in which the set will be used in. This will enable
the set to correctly install the functions applicable in the country of use.
less network in order to take advantage of the Smart functions. If you connect the
TV to your router using an Ethernet cable (recommended) this step will be skipped.
Follow the on screen prompts to connect to your wireless network. You can set up
the Network connection later in the network menu.
I
USB (2.0)
2
5V
500mA MAX
1
J
H
S AT IN
A
4
5
6
4. Environment of Use
5. TV Installation – Audio.
6. Default Source
Home Mode: For normal use, by default it is set to a power saving mode which reduces the energy used by up to 25% (by reducing the power to the LED/LCD panel).
This can be changed in the picture mode settings.
Depending on how you use / install your TV, select the appropriate setting. The sound
settings on the TV will adjust to suit the type of installation.
Select the source which you use the most. If Digital TV (Freeview) is chosen, then at
the next step, the set will tune in and default to Digital TV (Freeview). If one of the
other sources is selected, then the set will not tune in at this stage and default to
that input. If it is required to tune the set in later, this can be achieved by selecting
Menu > Channels
NOTE: In Home Mode, the TV will switch itself to the standby mode after 4 hours in
the event that the buttons on the remote control or TV set are not used.
B
C
A
Ethernet/LAN*
Network Connection
B
HDMI 1
C
HDMI 2 (ARC)
D
D
E
F
G
H
HDMI 3
HDMI input
HDMI input
I
2 x USB
USB port
HDMI input
J
Earphone
Earphone output
mini SCART
SCART input
K
AV IN
Audio/Video input
E
SAT IN
Satellte input
L
YPbpr
HD Input (YPbpr)
F
RF IN
RF/TV input
M
CI CARD IN
Common Interface module
G
Optical Digital Audio
Digital Audio output
* The Ethernet/LAN port is used for Freeview HD services and smart functions.
Store Mode: For store display use. The picture is adjusted to optimum settings. The
store demonstration will appear on the screen automatically after two minutes.
LC-32FI5x42K SHA-QSW-0016.indd 2
24/05/2018 17:11:45
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising