Sharp | B43CF5111KB14H | Instruction manual | Sharp LC-32CHF5111K Full HD D-LED TV with exceptional picture quality. Instruction Manual

Sharp LC-32CHF5111K Full HD D-LED TV with exceptional picture quality. Instruction Manual
User manual
Models:
LC-32CHF5111K
LC-32CFF5111K
LC-43CFF5111K
LC-43CFF5112K
LC-49CFF5001K
Image for illustration purposes only. Actual product may vary.
Sharp - User Guide - 50 51 - SHA-MAN-0142.indd 1
09/05/2016 17:27:01
Sharp - User Guide - 50 51 - SHA-MAN-0142.indd Sec1:2
09/05/2016 17:27:02
Manufacturers Guarantee
IMPORTANT GUARANTEE INFORMATION
Congratulations on purchasing this television. We hope you have many years of trouble free
enjoyment from your purchase.
Your product is covered under the manufacturers guarantee for 12 months from the date
of purchase.
If you experience any difficulties with your TV, please refer to the ‘Frequently asked questions’ section
in this user guide.
If you are still unable to remedy the issue, try resetting the TV to factory settings. (Details in the
‘Settings menu’ section of this user guide). Alternatively you can contact the technical support team on
the number below.
In the event that a fault is diagnosed, the technical support team will arrange to collect the TV from your
homeor work address, return it to our service centre, repair the item and then return it to you.
If we believe we cannot offer a permanent repair, we will replace the item.
Technical Support Information
Telephone UK 0871 097 1163, ROI 01443 3940
Web support: www.umc-uk.co.uk
The telephone opening hours are Monday to Friday 8.30am to 6pm, Saturday 9am – 5pm.
UK: Calls cost 12p per minute plus your phone company’s access charge.
ROI: Calls are charged at a local rate.
You must retain all packaging materials, in addition to your proof of purchase/receipt,
as you will need these in the event of warranty/service support.
This guarantee is in addition to and does not affect your statutory rights.
If you need to call the helpline, you will need the following information.
1) Model No
______________________________________ (You can find this on the rear of the TV)
2) Date of purchase
______________________________________ (You can find this on your sales receipt)
3) Serial Number
______________________________________ (You can find this on the rear of the TV)
EXAMPLE OF LABEL ON REAR OF TV
Model No
Serial No.
This TV set is for domestic use only
3
Sharp - User Guide - 50 51 - SHA-MAN-0142.indd Sec1:3
09/05/2016 17:27:02
Important safety instruction
Please read these instructions. All
the safety and operating instructions
should be read before the appliance
is operated.
Warnings
• Television sets with 40” size screens or more must be
lifted and carried by at least 2 people.
• This television does not contain any parts that are
serviceable by the user. In case of a fault, contact the
manufacturer or authorised service department.
Exposing the internal parts inside the TV may
endanger your life. The manufacturers guarantee
does not extend to faults caused by repairs carried
out by unauthorised third parties.
To prevent spread of fire,
keep candles or other open
flames away from this product
at all times
• To reduce the risk of fire, electric shock or damage
to the TV, do not expose it to dust, rain or moisture.
Never expose the TV to dripping or splashing and do
not place objects filled with liquids on or near the TV.
• Do not connect any external devices (DVD player,
games console etc) when the TV is switched on.
Disconnect both the TV and device from the mains
before connecting. Only switch appliances on when
the connection process is complete.
• Do not place the television in a confined space and
do not obstruct the ventilation openings at the rear
of the television.
• When installing on a wall, ensure the TV is at
least 5cm from the wall for ventilation.
• Always ensure that the TV’s ventilation openings
are not covered with items such as newspapers,
table-cloths, curtains, etc.
• Dispose of this television and any components
including batteries in an environmentally friendly
manner. If in doubt, please contact your local
authority for details of recycling.
• Ensure this TV is used in moderate climates only.
WARNING: Never place a television set on an
unstable location. A television set may fall,
causing serious personal injury or death. Many
injuries, particularly to children, can be avoided
by taking simple precautions such as:
• Use cabinets or stands recommended by the
manufacturer of the television set.
• Only use furniture that can safely support the
television set.
• Ensure the television set is not overhanging the edge
of the supporting furniture.
• Do not place the television set on tall furniture
(for example, cupboards or bookcases) without
anchoring both the furniture and the television
set to a suitable support.
• Do not place the television set on cloth or other
materials that may be located between the television
set and supporting furniture.
• Please educate children about the dangers of
climbing on furniture to reach the television set or
its controls.
• If your existing television set is being retained and
relocated, the same considerations as above should
be applied.
Safety
• For your safety, this appliance is fitted with a
fused 3 pin mains plug. Should the fuse need to be
replaced, ensure that any replacement is of the same
amperage and approved with the BSI mark.
• Never try and replace the mains plug unless you have
adequate qualifications and are legally authorised to
do so. In the event that a replacement mains cable
is required, contact the manufacturer for a suitable
replacement.
• Never use the television if it is damaged in any way.
• Always place the television on a flat level surface
avoiding anywhere which may be subject to
strong vibration.
• The ideal distance to watch the television is
approximately five times the length of the diagonal
measurements of the TV screen.
• Ensure the television is not placed on top of the
power cable as the weight of the television may
damage the cable and cause a safety hazard.
• Never place mobile phones, speakers or any
other device which may cause magnetic or radio
interference, near the television. If interference is
apparent, move the device causing the interference
away from the television.
• To disconnect the apparatus from the mains, please
use the mains plug located on the underside/rear of
the TV.
• Ensure that the mains plug is always easily accessible.
WARNING: Excessive noise when using
earphones and headphones can cause loss of
hearing.
4
Sharp - User Guide - 50 51 - SHA-MAN-0142.indd Sec1:4
09/05/2016 17:27:02
Important safety instruction
2. Do not display the fixed image for extended periods
of time.
3. Turn the power off when not in use.
Examples of images that are more likely to cause “screen burn”
are as follows (this is not an exhaustive list):
Maintenance
• To clean your TV, wipe with a soft, dry cloth. If the
surfaces are extremely dirty, use a soft cloth dipped
in a soap and water solution or a weak detergent
solution.
• Never use alcohol, paint thinner or benzene to clean
this unit.
• Before using a chemically treated cloth, read the
instructions that came with the cloth carefully.
CAUTION: If water or other liquid enters the
television through the display panel surface,
a malfunction may occur.
• TV channel logos: e.g. shopping channel logos and
pricing displays - especially if they are bright and
stationary. Moving or low-contrast graphics are less
likely to cause ageing of the screen.
• Time displays.
• Teletext: Do not view a stationary page for a long
period of time
• TV/DVD menus: e.g. listings of DVD disc content.
• Pause mode: Do not leave the TV in
pause mode
for long periods of time, e.g. when
watching DVDs
or videos.
Important: Once ‘shadow image/
screen burn’
occurs, it will never disappear and
is not
repairable under warranty.
How do I dispose of this
product?
Packaging
• The safest way to transport your item is in the
original box/packaging - please save your packaging
for this.
• You will need the original box/packaging in the
event of warranty/service repair or support. We
are unable to carry out warranty/service if you are
unable to package the item correctly.
Important information regarding use of video
games, computers, captions or other fixed image
displays
The extended use of fixed image program material can cause
a permanent “shadow image” on the LCD/LED panel, also
known as “screen burn”.
This “shadow image” can appear in the background during
normal viewing. This type of irreversible LCD/LED panel
deterioration can be limited by observing the following steps:
Cd
UK: Waste electrical products should not be disposed of with
household waste. Please dispose of the product at a
designated collection point for recycling
of WEEE. For your nearest facilities, please see www.recyclemore.co.uk or in store
for details.
ROI: Waste electrical products should not be disposed of with
household waste. Separate disposal facilities exist. Check with
your local authority or retailer for recycling advice.
Batteries
• Do not expose batteries to high temperatures,
excessive heat, prolonged sunshine or fire as this may
cause leakage, explosion or ignition.
Observe the correct polarity when inserting batteries.
• Do not use different types of batteries together or
mix old and new batteries.
• Dispose of batteries in an environmentally
friendly way.
• Certain regions may regulate the disposal of
batteries. Please consult your local authority.
1. Reduce the brightness/contrast setting to a minimum
suitable viewing level.
5
Sharp - User Guide - 50 51 - SHA-MAN-0142.indd Sec1:5
09/05/2016 17:27:02
Trademarks
The terms HDMI and HDMI High-Definition Multimedia
Interface, and the HDMI Logo are trademarks or registered
trademarks of HDMI Licensing, LLC in the United States and
other countries.
HDTV
The “HD TV” Logo is a trademark of DIGITALEUROPE.
HDTV 1080p
The “HD TV 1080p” Logo is a trademark of DIGITALEUROPE.
DVB
The DVB logo is the registered trademark of the Digital Video
Broadcasting (DVB) project.
Manufactured under license from Dolby Laboratories.
Dolby, Dolby Audio and the double-D symbol are trademarks
of Dolby Laboratories.
FREEVIEW
The FREEVIEW words and logos are trade marks of DTV
Services LTD. © DTV Services Ltd.
SAORVIEW
SAORVIEW is a registered trademark owned by RTÉ.
CE Statement:
Hereby, Universal Media Corporation l.t.d. declares
that this LED TV is in compliance with the essential
requirements and other relevant provisions of
Dirrective 1999/5/EC.
http://www.sharp.eu/av/documents-of-conformity
6
Sharp - User Guide - 50 51 - SHA-MAN-0142.indd Sec1:6
09/05/2016 17:27:02
CONTENTS
Manufacturers guarantee information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Important safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5
What is included in the box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Attaching / detaching the stand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Securing the TV to a wall / wall mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
TV buttons and Input Source menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-17
TV menu operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18-25
Picture menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18-19
Sound menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20-21
Channel menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Settings menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23-25
Lock menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Time menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Network menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
7 day TV guide and channel list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
USB record - Freeview / Saorview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
USB mode / media player . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
General information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30-31
Frequently asked questions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30-31
Technical specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32-37
For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited.
DTS, the Symbol, & DTS and the Symbol together are registered trademarks, and DTS TruSurround is a
trademark of DTS, Inc. © DTS, Inc. All Rights Reserved.
7
Sharp - User Guide - 50 51 - SHA-MAN-0142.indd Sec1:7
09/05/2016 17:27:02
What is included in the box
WHAT IS INCLUDED IN THE BOX
Accessories
Included with this TV are the following accessories.
1 x User guide
1 x Remote control and 2 x AAA batteries
User guide
1 x Quick start guide
1 x Mini composite / AV cable
Quick start
guide
1 x Mini component / YPbPr cable
1 x TV
1 x Stand installation pack
4x
1 x L (left)
1 x R (right)
1 x RF cable
Please save your box/packaging as you will need this in the event of warranty/service repair or support.
We are unable to carry out warranty/service if you are unable to package it correctly. The safest way to
package your item in the event of warranty/service repair is in it’s original box/packaging.
8
Sharp - User Guide - 50 51 - SHA-MAN-0142.indd Sec1:8
09/05/2016 17:27:02
Attaching/detaching the stand
ATTACHING THE STAND
Attaching the stand feet
To complete the stand feet installation you will require a cross head screw driver.
Screws that are included.
4x
(fig.1) Place the TV set on a flat and
clean surface with the panel facing
downwards to avoid damage, then
fix the stand feet shown. The feet are
TV panel must be facing downwards.
marked L (left) and R (right).
R
L
1
(fig.2) Secure the stand feet to
the underside of the TV set using
the 4 screws provided.
3
4
R
1
2
2
L
4x
Detaching the stand
Remove the screws highlighted then remove the stand feet from the underside of the TV set.
3
4
R
1
2
L
4x
9
Sharp - User Guide - 50 51 - SHA-MAN-0142.indd Sec1:9
09/05/2016 17:27:04
Securing the TV to a wall/wall mounting
SECURING THE TV TO A WALL
Securing the TV to a wall with anti-tip straps
For maximum security in the home, when using a TV with its stand, anti-tip straps should be fitted. These
are available from supermarket websites and other websites and are an easy, inexpensive and effective
way of ensuring your TV stays safely upright. Straps are designed to be attached to the rear of the TV and
then tethered to the wall or the furniture the TV is stood on, these are fitted as follows.
A) Using one or both of the top wall-mounting
holes and screws fasten one end of the fastening
cord/s to the TV. (the screws are already supplied in
the wall mounting holes)
B) Secure the other end of the fastening cord/s to
your wall. (you will need screws/fixings suitable
for your wall type - available separately from most
DIY stores).
Note - Please ensure that children do not climb on the TV set.
The Royal Society for the Prevention of Accidents is urging people to take care with flat-screen televisions.
RoSPA stated in 2010 that “Toddlers are particularly at risk of pulling flat-screen televisions on to
themselves. They are unsteady on their feet and are attracted by colourful television images.”
The risk is increased as televisions become lighter.
Wall mounting
IMPORTANT - Before drilling any holes in the wall ensure you are not drilling where there could be any
electrical wires, water or gas pipes.
1) Remove the four screws located at the back of the TV set.
2) The wall mount can now be easily attached to the mounting holes, located
on the back of the TV, using the same four screws removed.
For VESA wall mounting information please refer to the Technical
Specification page.
For optimum viewing, if wall mounting the TV higher than eye level, the TV should be tilted downwards
so that the TV’s screen is ‘face on’. See fig 1 and 2.
fig 1
INCORRECT
TV
Viewing angle
10
fig 2
CORRECT
TV
Viewing angle
Important – If wall mounting this TV, only use the screws already provided in the wall mounting holes
located at the back of the TV, using other screws which are longer could cause irreparable damage to
internal parts.
Sharp - User Guide - 50 51 - SHA-MAN-0142.indd Sec1:10
09/05/2016 17:27:04
Remote control
REMOTE CONTROL
Key
For models with integrated DVD players.
For models with PVR Function.
For models with USB Playback.
For models with 3D functions.
1
2
2
NUMBER BUTTONS - 0–9 to select a TV channel directly.
TV GUIDE - Opens the 7 day TV guide (digital TV mode).
- To return to the previous channel viewed.
3
4
STANDBY - Switch on TV when in standby or vice versa.
MUTE - Mute the sound or vice versa.
1
VOL (+/-) - To increase/decrease the sound level.
PICTURE - Scrolls through picture mode options.
SOUND - Scrolls through sound mode options.
SOURCE - To display the input/source menu.
CH (+/-) - To increase or decrease the channel being watched.
MENU - To display OSD menu.
EXIT - To exit all menus.
- Allows you to navigate the on-screen menus and adjust the
system settings to your preference.
INFO - Press once for now/next channel information.
- Press twice for information about the current programme.
FAV - To display favourites menu.
SLEEP - Press repeatedly to cycle through the sleep options.
TEXT - To enter/exit Teletext (Analogue TV).
SUBTITLE - To switch the dialogue at the bottom of the screen (on/off).
ASPECT - To switch the screen between the different picture formats.
TV - Switch to digital source.
MEDIA - Access the USB media function.
RADIO - Switch to radio whilst in digital TV source.
RECORD - Access the USB record function.
3
4
- To restart the current chapter
- To advance forward to the next chapter
- To stop the playback/Eject Disc
(To EJECT the disc press/hold the
button for 4 seconds)
- To play in fast rewind mode
- To play in fast forward mode
- To play/pause
REC LIST - Opens the list of what has been previously recorded.
GOTO - To go to a specific chapter.
A-B - Press once to set point, press a second time to return to point.
3D - Press repeatedly to cycle through the 3D options.
REPEAT - To repeat playback.
Buttons to use when
pairing the remote
control to the TV.
If the remote control does not function with the TV, the remote control may need to be paired with the
TV set, please refer to the ‘Frequently Asked Questions’ page for more information.
11
Sharp - User Guide - 50 51 - SHA-MAN-0142.indd Sec1:11
09/05/2016 17:27:04
Sharp - User Guide - 50 51 - SHA-MAN-0142.indd Sec1:12
09/05/2016 17:27:05
TV Buttons and Input Source Menu
TV BUTTONS AND INPUT SOURCE MENU
1
2
3
4
5
6
7
1 Volume up and menu right
2 Volume down and menu left
3 Programme/channel up and menu up
4 Programme/channel down and menu down
5 Displays menu/OSD
6 Displays the ‘Input Source’ menu
7 Standby power On/Off
Note: The shape of the TV buttons may vary by model.
Choosing Mode Input/Source
Use the source menu to switch between
input/connections.
A) Using the buttons on the remote control:
1) Press [SOURCE] - The source menu will appear.
2) Press [\/] or [/\] to select the input you require.
3) Press [OK].
B) Using the buttons on the Television:
1) Press [SOURCE].
2) Scroll up / down using CH+/ CH- buttons to
the input/source you require.
3) Press Vol+ to change input/source to the
one selected.
For further information on input/connections please
view ‘Connections’ pages.
An example of the ‘Input Source’ menu
(will vary by model)
13
Sharp - User Guide - 50 51 - SHA-MAN-0142.indd Sec1:13
09/05/2016 17:27:05
Connections
CONNECTIONS
C I C A R D IN
Y Pb Pr
L
K
US B
M
AV IN
Connections for the LC-43CFF5112K and LC-49CFF5001K models only.
J
I
E A R P HO NE
A
A
Ethernet
Digital Audio
Output
B
C
D
E
F
G
H
Earphone input
H
RF in
RF / TV aerial input
Ethernet/LAN*
Network connection
I
HDMI 3
HDMI input (MHL Port)
Digital audio
Digital optical audio output
J
USB x 2
USB port
D
SCART
SCART input
K
AV in
Audio/video input
E
HDMI 1
HDMI input (ARC)
L
YPbPr
HD input (Ypbpr)
F
HDMI 2
HDMI input
M
CI card in
Common interface module
G
SAT in**
Satellite input
B
C
Earphones
* The Ethernet/LAN port is used for Freeview HD services.
** Satellite input for the LC-43CFF5112K model only.
14
Sharp - User Guide - 50 51 - SHA-MAN-0142.indd Sec1:14
09/05/2016 17:27:05
Connections
CONNECTIONS
C I C A R D IN
AV IN
E A R P HO NE
Connections for the LC-32CHF5111K, LC-32CFF5111K and LC-43CFF5111K models only.
N
M
Y Pb Pr
J
US B
K
V G A /P C (A udio in)
L
I
H
Digital Audio
Output
V G A /P C IN
A
B
C
D
A
LAN*
Network connection
E
F
G
H
HDMI 3
HDMI input
B
HDMI 1
HDMI input
I
USB x 2
USB port
C
HDMI 2
HDMI input (ARC)
J
VGA PC audio in
3.5mm PC audio input
D
VGA PC
VGA-PC input
K
YPbPr
HD input (Ypbpr)
E
SCART
SCART input
L
CI card in
Common interface module
F
RF in
RF / TV aerial input
M
AV in
Audio/video input
G
Digital audio
Digital optical audio output
N
Earphones
Earphone input
*The LAN/Ethernet port is used for Freeview HD services only.
15
Sharp - User Guide - 50 51 - SHA-MAN-0142.indd Sec1:15
09/05/2016 17:27:06
Connections
CONNECTIONS
Note: Connecting cables are shown for example only and may not be included. Please check ‘What Is
Included In The Box’ page.
Connecting to a device with Composite AV/Video output
TV Source should be set to Composite/AV.
L (white)
R (red)
Mini
AV in
Video
(yellow)
Connecting to a device with SCART output
TV source should be set to SCART.
Scart
Scart
Connecting to a device with SCART output with SCART/AV adapter
TV source should be set to Composite/AV.
Mini
AV in
Scart
Connecting to a device with HDMI output
A HDMI cable can output both video and audio and enables you to enjoy digital-quality video and audio
with minimal loss of quality.
TV Source should be set to the corresponding HDMI port (HDMI 1, HDMI 2 etc)
HDMI
HDMI
16
Sharp - User Guide - 50 51 - SHA-MAN-0142.indd Sec1:16
09/05/2016 17:27:08
Connections
CONNECTIONS
Connecting to a device with Component/YPbPr output
If you are supplied with a cable from the device which has red, green, blue, red & white connectors you
must connect via Component (for picture) and by phono cable (for sound).
TV source should be set to Component/YPbPr.
Y (green)
PB (blue)
Mini
YPbPr
PR (red)
L (white)
R (red)
Mini
AV in
Video (yellow)
is not connected
Connecting to an external audio device (Amplifiers, Surround Sound,
Sound Bars etc)
When connecting via the TV’s 3.5mm earphone output, this will disable the TV speakers.
OPTION 1 for 3.5mm EARPHONE Output
3.5mm
audio
in
3.5mm
earphone
OPTION 2 for Digital Optical Audio Output
Digital
audio
out
(optical)
Digital
audio
in
(optical)
Connecting an Ethernet/Network cable
The LAN/Ethernet port is used for Freeview HD services only.
Ethernet
port
Ethernet
port
17
Sharp - User Guide - 50 51 - SHA-MAN-0142.indd Sec1:17
09/05/2016 17:27:08
TV Menu Operation
PICTURE MENU
To access this menu, press [MENU] button on the remote control.
To select a sub menu press [OK]
buttons.
If you wish to make changes to any of the default settings, use the scroll
To confirm any settings press [OK] button. To exit this menu at anytime, press [EXIT] button.
Picture Mode - Choose from the following presets:
Dynamic
Recommended settings for fast moving pictures
Standard
Standard settings
Mild
Set to be lighter in colour and less bright
Personal
Lets you manually alter all the settings
Economy
Power saving mode which reduces the energy used by up to 25% (by reducing the
power to the LED/LCD panel). In Economy mode, the TV will switch itself to
Standby mode after 3-5 hours in the event that the TV buttons or remote control
buttons are not pressed (change the picture mode to another setting to de-activate
this function)
You can make the following adjustments in Personal mode:
• Contrast - Switch the balance between black and white.
• Brightness - Increase or decrease the brightness of the picture.
• Colour - Increases the colour from black and white.
• Tint - Lets you increase or decrease the level of tint within the picture
(only available for NTSC input signal).
• Sharpness - Increase or decrease the sharpness of the picture.
Colour Temperature Choose from the following presets:
Normal
Default settings
Warm
Increases red within the picture
Cold
Increases blue within the picture
18
Sharp - User Guide - 50 51 - SHA-MAN-0142.indd Sec1:18
09/05/2016 17:27:08
TV Menu Operation
PICTURE MENU
To access this menu, press [MENU] button on the remote control.
To select a sub menu press [OK]
If you wish to make changes to any of the default settings, use the scroll
buttons.
To confirm any settings press [OK] button. To exit this menu at anytime, press [EXIT] button.
Aspect Ratio - Within the UK the picture format varies depending on the channel/broadcast. There are a
number of different options to best meet your needs. Choose from the following settings:
Auto
Automatically displays the best picture format so the
picture is in the correct position, black lines maybe
viewable at the top/bottom and/or sides.
4:3
Full Screen
Displays a picture in
the Full creen size
without overscan.
16:9 signal will be
displaied in original
proportion. Other
picture format will
be stretched to fill
the screen.
Displays the 4:3
picture in its
original size.
Side bars are
shown to fill the
16:9 screen
16:9
Zoom1 and Zoom 2
Fills the screen with
a regular 16:9 signal
and 4:3 picture
format will be
stretched to fill
the screen
The picture
is the correct
proportion but
zoomed in to
fill the screen
Noise Reduction - Allows you to switch noise reduction ON or OFF.
19
Sharp - User Guide - 50 51 - SHA-MAN-0142.indd Sec1:19
09/05/2016 17:27:08
TV Menu Operation
SOUND MENU
Sound Mode - Choose from the following presets
Standard
Default settings
Music
Emphasises music over voices
Movie
Provides live and full sound for movies
Sports
Emphasises sound for sports
Personal
Selects your personal sound settings
You can make the following adjustments in Personal mode:
• Treble - Allows you to adjust treble levels to suit your listening preferences.
• Bass - Allows you to adjust bass levels to suit your listening preferences.
• Balance - To switch the sound between the left and right speakers.
Auto Volume Level (AVL) - When ‘on’ is selected, the volume will attempt to stay at a constant level
regardless of TV programme and advertisements.
DTS TruSurround - Choose from the following presets
Off
Off
On
On - TruSurround™ creates an immersive, feature-rich surround
sound experience from two speakers, complete with rich bass, high frequency detail
and clear dialog
For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited.
DTS, the Symbol, & DTS and the Symbol together are registered trademarks, and DTS TruSurround is a
trademark of DTS, Inc. © DTS, Inc. All Rights Reserved.
20
Sharp - User Guide - 50 51 - SHA-MAN-0142.indd Sec1:20
09/05/2016 17:27:08
TV Menu Operation
SOUND MENU
Digital Output - This is the digital optical audio output. Choose from the following options:
Off
To turn off Digital Output
Auto
Selects the best settings automatically
PCM
Select this option if you are connecting to a Stereo Hi-fi via optical cable (Pulse-code
modulation (PCM) is a digital representation of an analogue signal)
Audio Description - This allows the user to switch Audio Description ON or OFF. (Audio Description is
a service available on certain programmes. It provides a description of what is happening during the
selected programme for a person who is visually impaired).
AD Volume - This allows the user to increase and decrease the AD (Audio Description) volume level.
21
Sharp - User Guide - 50 51 - SHA-MAN-0142.indd Sec1:21
09/05/2016 17:27:08
TV Menu Operation
CHANNEL MENU
To access this menu, press [MENU] button on the remote control and scroll right.
To select a sub menu press [OK]
buttons.
If you wish to make changes to any of the default settings, use the scroll
To confirm any settings press [OK] button. To exit this menu at anytime, press [EXIT] button.
Auto Tuning - Allows you to retune the television for all digital channels, digital radio stations and
analogue devices.
Analogue Manual Tuning - Allows you to manually tune your analogue signal.
Freeview/Saorview Manual Tuning* - Allows you to manually tune your digital signal.
Channel Edit - Allows you to delete, move, skip and select favourite channels.
Important: To receive Freeview/Saorview channels, in particular HD
channels, you will need a Digital TV aerial and be in a good Freeview/
Saorview coverage area. You can check the coverage for your area at
www.freeview.co.uk or www.saorview.ie
Please note that any Freeview HD channels found during tuning will
be placed in channel positions above 100.
For example, 101 (BBC1 HD) 102 (BBC2 HD) etc.
*Freeview channels are only available in the UK, Saorview channels
are only available in the ROI.
Signal Information - Allows you to view signal frequency, signal quality and signal strength.
CI Information - Pay per view services require a “smartcard” to be inserted into the TV. If you subscribe to
a pay per view service the provider will issue you with a ‘CAM’ and a “smartcard”. The CAM can then be
inserted into the COMMON INTERFACE PORT (CI Card In).
Recorded List - Shows a list of recorded TV programmes.
Schedule List - Lists your programme reminders.
OAD (Software Update) - Switch on/off OAD (over air download) software updates.
Tip: If you do not press any buttons for 30 seconds, the menu will automatically exit. You can change
the length of time before the menu exits automatically - see ‘OSD Timer’ in the Time Menu
22
Sharp - User Guide - 50 51 - SHA-MAN-0142.indd Sec1:22
09/05/2016 17:27:08
TV Menu Operation
SETTINGS MENU
Set Up - Choose from the following options:
• Language - Allows you to change the language of the menu.
• Audio Language - Select your preferred primary audio language.
• Audio Language 2 - Select your preferred secondary audio language.
• Subtitle Language - Select your preferred primary subtitle language.
• Subtitle Language 2 - Select your preferred secondary subtitle language.
• Hearing Impaired - This allows the user to turn on the Hearing Impaired function, this produces
subtitles on the screen which provide a description of what is happening during the selected program.
• Blue Screen - Changes the background when there is no input between clear and a blue background
(Only available on some sources).
• LED Status - Allows the user to switch the LED power indicator light ON or OFF when the TV being
operated. (When this option is set to OFF the LED power indicator light will flash when the remote
control is used).
• First Time Installation - Allows you to access the First Time Installation menu and retune the TV set.
• Reset TV - This resets the menus to factory settings and clears all the TV channels from the television.
• Store Mode - switch ON/OFF shop demonstration mode (available only if store mode was selected
during first time installation).
Time Menu - Choose from the following options:
• Auto Sync - When this option is set to ON the TV will automatically set the time,
select OFF to access the ‘Time’ option and manually set the time.
• Time - Allows you to manually set the time, only available when Auto Sync is set
to OFF.
• Off Time - Allows you to set a specific time for your TV to turn off.
• On Time - Allows you to set a specific time for your TV to turn on, the channel it will
then display, the source it will be on and also the volume. This function can then be
toggled to repeat every day or a certain day.
• Sleep Timer - Lets you set the sleep timer so the television automatically switches
off after a set amount of time. Off -> 10min -> 20min -> 30min -> 60min -> 90min -> 120min ->
180min -> 240min.
• OSD Timer - Lets you adjust the amount of time the On Screen Menu stays on the screen before
disappearing. Off -> 5secs -> 15secs -> 30secs -> 60secs.
• Auto standby - Set ‘Auto Standby’ to OFF, 3 hours, 4 hours or 5 hours.
• Time Zone - Change your current time zone.
23
Sharp - User Guide - 50 51 - SHA-MAN-0142.indd Sec1:23
09/05/2016 17:27:08
TV Menu Operation
SETTINGS MENU
Lock menu - Choose from the following options:
• System/Hotel Lock - Allows you to lock or unlock the menu. You will be asked to
enter a 4 digit passwordUse the ◄ button to quit the password input or use the ►
button to clear. Default password is 0000.
• Change Password - Allows you to change the password.
• Channel Lock - Allows you to lock certain channels manually.
• Parental Guidance - Allows you to set the rating to block certain content based
on age information.
• TV Button Lock - Allows you to lock the buttons on the side of the TV set.
• Default Source - Allows the user to set the default source. The default source is the source the TV starts
on when first switched on.
• Default Channel - Allows the user to set a channel as the default channel on the Digital source.
The default channel is the channel the TV starts on when first switched on.
• Max Volume - Allows you to adjust and set the maximum volume.
• Source Lock - Allows you to lock the source menu.
Network menu - Choose from the following options:
The Network connection is only intended to access Pay TV services from your
Freeview/Saorview broadcaster. Please note, the TV cannot be used for internet
access.
For the network configuration to work the TV will need to be connected to your
home network via an ethernet cable, with these requirements in place the TV will
connect to the network automatically.
Choose from the following options:
• IP Config - Allows you to access LAN network connection settings. choose from the following options:
Auto
Will automatically connect the TV to your home network(this is the default setting
Manual
Allows you to manually change the IP, Netmask, Gateway and DNS information.
and is highly recommended)
• Network Info - Allows you to view Information about network settings
• Network Test - Allows you to test the network connection.
24
Sharp - User Guide - 50 51 - SHA-MAN-0142.indd Sec1:24
09/05/2016 17:27:08
TV Menu Operation
SETTINGS MENU
To access this menu, press [MENU] button on the remote control and scroll right.
To select a sub menu press [OK]
buttons.
If you wish to make changes to any of the default settings, use the scroll
To confirm any settings press [OK] button. To exit this menu at anytime, press [EXIT] button.
PVR File System - PVR Recording options:
Select disk
Select USB port and disk partition
TimeShift Size
Set size time of shift buffer.
Format Start
You can format connected USB storage device to FAT 32 file system.
Speed check
Tests write speed of connected USB storage devices.
WARNING: ALL DATA ON THE USB DEVICE WILL BE DELETED
HDMI CEC (Consumer Electronic Control) - Allows HDMI devices to control each other and allows the user to
operate multiple devices with one remote control. (only available with compatible devices).
Software Update (USB) - Allows you to update your TV with the newest software using a USB memory stick.
Software and instructions are available on our website.
Software Update (NET) - Allows you to update your TV with the newest software via your internet
connection. This will require the TV to be connected to the internet and have a blank USB memory stick
inserted in to the USB input of the TV. The software will be downloaded on to the blank USB memory stick
and then complete the update process.
Version Info - Allows you to view the version/information of the software installed on the TV set.
Note: For further support with software updates, contact our technical support team or refer to the
‘product support’ section of the website. If the TV is using the newest software available it will not
attempt to update the software.
Sharp - User Guide - 50 51 - SHA-MAN-0142.indd Sec1:25
09/05/2016 17:27:09
Sharp - User Guide - 50 51 - SHA-MAN-0142.indd Sec1:26
09/05/2016 17:27:09
7 Day TV Guide and Channel List
7 DAY TV GUIDE
TV Guide is available in Saorview/Freeview TV mode. It provides information about forthcoming
programmes (where supported by the Saorview/Freeview channel). You can view the start and end
time of all programmes and on all channels for the next 7 days and set reminders.
1) Press [TV GUIDE] on the remote control, the following 7 Day TV Guide will appear.
2) Navigate through the menu using
You can now:
Record a programme by pressing RED (USB device must be connected).
Set a reminder by pressing GREEN
View a previous day by pressing YELLOW
View the next day by pressing BLUE
3) Press [EXIT] to exit the 7 day TV Guide
Channel List
To view the channel list, please ensure that the TV is set to either the analogue or digital source and
no menus or TV notifications are displayed.
1) Press [OK] on the remote control and the
channel list menu will appear.
2) Press LEFT / RIGHT arrow to filter desired channel types (Digital TV,
Radio, All).
3) Scroll through the channel list by using
buttons then
press [OK] to view the channel that is currently highlighted.
4) Press [EXIT] to exit the channel list.
27
Sharp - User Guide - 50 51 - SHA-MAN-0142.indd Sec1:27
09/05/2016 17:27:09
USB Record - Freeview/Saorview
USB RECORD - FREEVIEW/SAORVIEW MODE
Built into this television is a USB record facility. This function is available in Freeview/Saorview mode
when used in conjunction with a compatible USB memory stick or USB hard drive. The benefits of this
are as follows:
• Pause live TV and then playback, fast forward and rewind (up to live TV)
• One button record, if you decide you want to record the current programme
• Easy programmable recording from the 7 day TV Guide
• Record TV and watch/listen back on your computer/laptop
Due to the nature of the product, it is necessary to use a high speed USB memory stick (as the TV
reads from and writes to the memory stick at the same time, some memory sticks may not be suitable)
You can purchase high speed memory sticks from some computer stores, alternatively, we have
a selection of tested and compatible memory sticks available to purchase directly from the
helpline/website.
Minimum specification - USB Memory Stick
Read Speed
80 Mb/s (Megabit Per Second)
Write Speed
40 Mb/s (Megabit Per Second)
If you wish to use a USB portable hard drive larger than 32GB, please refer to the FAQ section at the rear
of this user guide.
Pause live TV (time shift)
Pausing Live TV is very simple.
- Press the play/pause button and the television will pause and the live
content will be recorded. To resume watching press play/pause again.
- Press fast forward to go forward in a recording (i.e. to skip adverts)
- Press fast rewind to go back in a recording (i.e. if you fast forwarded too
far)
Tip: When you switch the TV to standby or change channel the time shift memory is wiped. To restart
time shift you must press play/pause button.
One button record
At any point in time you may decide to record the current channel that you are watching. To do this you
need to press the red button highlighted below.
Tip: This television contains one TV tuner, therefore it can only record the channel you are watching or
record one channel while the television is in standby mode.
Note: USB record function is only available in Freeview/Saorview TV mode. Due to copyright laws and
illegal copying/recording it is not possible to record to/from any other input/output source.
28
Sharp - User Guide - 50 51 - SHA-MAN-0142.indd Sec1:28
09/05/2016 17:27:09
USB Mode/Media Player
USB MODE/MEDIA PLAYER
USB mode offers playback of various different types of content that you have saved on your USB
Memory Stick.
On switching to USB source the below menu screen will appear. The content will be divided into Photo,
Music, Movie and Text based on file type.
1) You can navigate through the menus using the
buttons on the remote control,
scroll
to confirm the item you wish to play/view press the
[OK] button.
2) Select the drive you require. (If your drive only
has 1 partition you will only see 1 item).
3) You can now access the item. Press OK to view.
4) Whilst viewing your media, you can control
the item by using the remote control buttons
(below) or by pressing (Info) to access the
on-screen playback menu, you can now make
your selection by using the
and (OK)
buttons on the remote control.
Fig.A
Tip: If you experience a playback issue, please ensure the files being used are the correct format
(example - the picture plays but no sound) See technical specification page for compatible file types
Note: USB extension cables are not recommended as they can cause a reduction in picture/audio quality
and stoppages during play back of USB content.
29
Sharp - User Guide - 50 51 - SHA-MAN-0142.indd Sec1:29
09/05/2016 17:27:09
General Information
FREQUENTLY ASKED QUESTIONS
General
I would like to have louder
sound by connecting additional
speakers. For TV models with
digital optical audio output.
1) Use the 3.5mm headphone output and a 3.5mm to phono cable (available
separately) to connect to an amplifier/surround sound system. Please note this
will deactivate the TV’s built in speakers.
2) Connect a digital optical audio cable from the TV’s digital optical audio output
to your amplifier/surround systems digital optical audio input.
General
Why are some options in the menu
unavailable and greyed out.
Some options are only available in certain sources, i.e. HDMI. They are
unavailable in the other sources where they have no affect.
General
Can I stop my TV automatically
turning off after 4hrs?
Yes, in the ‘Time’ menu settings, scroll down to Auto standby and select OFF.
TV
I have tuned in Digital TV but I
am not receiving any or all of the
channels and/or the channels I
receive are breaking up.
1) Check you are in an area that can receive Freeview/Saorview, visit www.freeview.co.uk or
www.saorview.ie
2) Check you are using an aerial that is able to receive a good digital signal. In most cases,
you will need an outdoor digital hi-gain/wideband aerial. In areas that have excellent
digital coverage, you may be able to use a loft type aerial but it is highly likely that you will
also need to connect a booster between the back of the TV and the TV aerial wall socket.
Unfortunately, to receive a good enough digital signal, it is not possible to use a portable/
indoor type aerial.
TV
I have re-tuned my television but
when I switch it off it is not storing
the channels.
If the TV does not save the channels when you power it off, it’s likely the channel database
has become corrupt.
1) Turn off the TV.
2) Remove the RF/Aerial cable from the rear of the TV and then turn the TV back on again.
3) Using the remote control, press Menu followed by 8-8-8-8 to enter the initial setup/first
time installation menu.
4) Press OK (let the TV run the full tuning process).
5) Once completed, turn off the TV, reconnect the RF/Aerial cable then turn the TV back on
again.
6) Repeat steps 3 & 4.
VCR/DVD
Recorder
I have connected the TV to my VCR
or DVD Recorder via SCART but it is
not recording.
In addition to connecting via SCART, you should connect the aerial cable from the wall
socket to your VCR/DVD Recorder and another aerial cable from the VCR/DVD Recorder to
the TV.
Game Consoles
I have connected my Playstation/
Xbox to the TV via HDMI, but I am
not receiving any pictures or sound
on my TV
1) Ensure the TVs’ source is set to HDMI.
2) Check your settings on your Playstation/Xbox are as per the Playstation/Xbox
instruction manual.
Game Consoles
I have connected my Playstation/
Xbox to the TV via Component
cables (red, green & blue) but I am
not receiving any sound.
Component cables only provide HD pictures. For the sound you will need to connect the
red & white audio cables on the Playstation/Xbox to the red & white phono inputs (or mini
AV input where fitted) on the rear of the TV. Please refer to the ‘Connections’ pages.
System Lock
I have changed the password
on the television and now
forgotten it.
There is a master password of 4711, to gain access to the TV menu and reset the
normal password.
Freeview HD
I cannot access all Freeview
channels.
Some data channels for Freeview can only be obtained when the TV ‘s ethernet port is
connected to your router.
Freeview HD
I cannot find the Freeview HD
channels.
Freeview HD channels found during tuning will be placed in channel positions above 100.
For example, 101 (BBC1 HD), 102 (BBC2 HD) etc.
30
Sharp - User Guide - 50 51 - SHA-MAN-0142.indd Sec1:30
09/05/2016 17:27:09
General Information
FREQUENTLY ASKED QUESTIONS
USB Mode
I have inserted a USB Memory
Key, but the TV does not
recognise it.
Ensure the USB Memory Key is formatted to type FAT32.
USB Mode
Using a USB portable hard drive
larger than 32GB.
If you wish to use a portable hard drive larger than 32GB, please note that it must be
formatted to the FAT32 file system in order to operate on this TV. Windows XP/Vista
computers are only capable of formatting up to 32GB, therefore, you will need a software
programme/utility to format larger hard drives.
Please refer to the website, www.umc-uk.co.uk, for more information.
USB Record
I cannot change the channel,
access the menu or use the red
button.
During time shift you cannot change the channel, access the menu or use the red button.
USB Record
When using the USB to record
the picture ‘breaks up’ or
experience loss of sound.
Check the USB memory stick meets the minimum read speed requirements. Standard
definition channels require a read speed of 20 MB/s (Mega Byte per second) and a
write Speed of 6 MB/s (Mega Byte per second) HD channels require the read speed of 80
MB/s (Mega Byte per second) and a write speed of 40 MB/s (Mega Byte per second). USB 3.0
sticks should be used where possible.
Pairing the remote
control
Remote control does not work
with the TV set when first time
installation is on the TV screen
During first time installation press and hold the GREEN and YELLOW buttons on the remote
control for a few seconds. The power light will blink 5 times to confirm the TV and remote
control are paired.
Pairing the remote
control
Remote control does not power
on the TV set
Switch the TV on using the standby button on the TV set (not the remote control), once
switched on, press the standby button on the TV set once, this will prompt the ‘pairing menu’
to appear, scroll through and highlight ‘Pair your remote’ by pressing the CH+/CH- TV button
(scroll up/down function in the menu) then press the TV set’s standby button (OK function
in the menu) to confirm your selection, then with the remote control, press and hold the
GREEN and YELLOW buttons for a few seconds, the power light will blink 5 times to confirm
the TV and remote control are paired.
31
Sharp - User Guide - 50 51 - SHA-MAN-0142.indd Sec1:31
09/05/2016 17:27:09
General Information
TECHNICAL SPECIFICATION
Product fiche
Trademark
Model ID
Energy efficiency class
Visible screen size (diagonal)
On-mode average power consumption
Sharp
LC-32CHF5111K
A+
81 cm / 32 inches
31.0 W
Annual energy consumption *1
45 kWh
Standby power consumption *2
<0.50 W
Off mode power consumption
Screen resolution
n/a
1366 (H) x 768 (V)
*1: Energy consumption XYZ kWh per year, based on the power consumption of the television
operating 4 hours per day for 365 days. The actual energy consumption will depend on how the
television is used.
*2: When the TV is turned off with the remote control/standby button and no function is active.
Additional technical information
RF
Inputs
Sound Outputs
75 ohm Antenna / Analog / DVB
3 x HDMI, 1 x VGA/PC, 2 x USB, 1 x RJ45 (Ethernet), 1 x
3.5mm jack for PC audio input, 1 x Mini Component/
YPbPr, 1 x Mini AV - Composite Video/CVBS & L/R Audio
shared for Composite Video/CVBS & Component/YPbPr
1 x 3.5mm Headphone/Audio out,
1 x Digital Optical Audio Out
Speaker / Amplifier Watts (RMS)
2 x 10 / 2 x 8
Voltage and power consumption
AC 220V ~ 240V; 50/60Hz
31/45/70 (home mode/standard/max)
(<0.5W in Standby)
Dimensions including stand (mm)
Net weight (Kgs)
Wall Mounting
733W x 467H x 160D
4.5
VESA 200 x 100 (mm)
32
Sharp - User Guide - 50 51 - SHA-MAN-0142.indd Sec1:32
09/05/2016 17:27:09
General Information
TECHNICAL SPECIFICATION
Product fiche
Trademark
Model ID
Energy efficiency class
Visible screen size (diagonal)
On-mode average power consumption
Sharp
LC-32CFF5111K
A+
81 cm / 32 inches
31.0 W
Annual energy consumption *1
45 kWh
Standby power consumption *2
<0.50 W
Off mode power consumption
Screen resolution
n/a
1920 (H) x 1080 (V)
*1: Energy consumption XYZ kWh per year, based on the power consumption of the television
operating 4 hours per day for 365 days. The actual energy consumption will depend on how the
television is used.
*2: When the TV is turned off with the remote control/standby button and no function is active.
Additional technical information
RF
Inputs
Sound Outputs
75 ohm Antenna / Analog / DVB
3 x HDMI, 1 x VGA/PC, 2 x USB, 1 x RJ45 (Ethernet), 1 x
3.5mm jack for PC audio input, 1 x Mini Component/
YPbPr, 1 x Mini AV - Composite Video/CVBS & L/R Audio
shared for Composite Video/CVBS & Component/YPbPr
1 x 3.5mm Headphone/Audio out,
1 x Digital Optical Audio Out
Speaker / Amplifier Watts (RMS)
2 x 10 / 2 x 8
Voltage and power consumption
AC 220V ~ 240V; 50/60Hz
31/45/70 (home mode/standard/max)
(<0.5W in Standby)
Dimensions including stand (mm)
Net weight (Kgs)
Wall Mounting
733W x 467H x 160D
4.5
VESA 200 x 100 (mm)
33
Sharp - User Guide - 50 51 - SHA-MAN-0142.indd Sec1:33
09/05/2016 17:27:09
General Information
TECHNICAL SPECIFICATION
Product fiche
Trademark
Model ID
Energy efficiency class
Visible screen size (diagonal)
On-mode average power consumption
Sharp
LC-43CFF5111K
A+
109 cm / 43 inches
41.0 W
Annual energy consumption *1
60 kWh
Standby power consumption *2
<0.50 W
Off mode power consumption
Screen resolution
n/a
1920 (H) x 1080 (V)
*1: Energy consumption XYZ kWh per year, based on the power consumption of the television
operating 4 hours per day for 365 days. The actual energy consumption will depend on how the
television is used.
*2: When the TV is turned off with the remote control/standby button and no function is active.
Additional technical information
RF
Inputs
Sound Outputs
75 ohm Antenna / Analog / DVB
3 x HDMI, 1 x VGA/PC, 2 x USB, 1 x RJ45 (Ethernet), 1 x
3.5mm jack for PC audio input, 1 x Mini Component/
YPbPr, 1 x Mini AV - Composite Video/CVBS & L/R Audio
shared for Composite Video/CVBS & Component/YPbPr
1 x 3.5mm Headphone/Audio out,
1 x Digital Optical Audio Out
Speaker / Amplifier Watts (RMS)
2 x 10 / 2 x 8
Voltage and power consumption
AC 220V ~ 240V; 50/60Hz
41/60/75W (home mode/standard/max)
(<0.5W in Standby)
Dimensions including stand (mm)
Net weight (Kgs)
Wall Mounting
966W x 596H x 184D
8
VESA 400 x 200 (mm)
34
Sharp - User Guide - 50 51 - SHA-MAN-0142.indd Sec1:34
09/05/2016 17:27:09
General Information
TECHNICAL SPECIFICATION
Product fiche
Trademark
Model ID
Energy efficiency class
Visible screen size (diagonal)
On-mode average power consumption
Sharp
LC-43CFF5112K
A+
109 cm / 43 inches
41.0 W
Annual energy consumption *1
60 kWh
Standby power consumption *2
<0.50 W
Off mode power consumption
Screen resolution
n/a
1920 (H) x 1080 (V)
*1: Energy consumption XYZ kWh per year, based on the power consumption of the television
operating 4 hours per day for 365 days. The actual energy consumption will depend on how the
television is used.
*2: When the TV is turned off with the remote control/standby button and no function is active.
Additional technical information
RF
Inputs
Sound Outputs
75 ohm Antenna / Analog / DVB / Satellite
3 x HDMI, 2 x USB, 1 x SCART,
1 x RJ45 (Ethernet), 1 x Mini Component/YPbPr,
1 x Mini AV - Composite Video/CVBS & L/R Audio shared for
Composite Video/CVBS & Component/YPbPr
1 x 3.5mm Headphone/Audio out,
1 x Digital Optical Audio Out
Speaker / Amplifier Watts (RMS)
2 x 10 / 2 x 8
Voltage and power consumption
AC 220V ~ 240V; 50/60Hz
41/60/75W (home mode/standard/max)
(<0.5W in Standby)
Dimensions including stand (mm)
Net weight (Kgs)
Wall Mounting
966W x 596H x 184D
8
VESA 400 x 200 (mm)
35
Sharp - User Guide - 50 51 - SHA-MAN-0142.indd Sec1:35
09/05/2016 17:27:09
General Information
TECHNICAL SPECIFICATION
Product fiche
Trademark
Model ID
Energy efficiency class
Visible screen size (diagonal)
On-mode average power consumption
Sharp
LC-49CFF5001K
A+
123 cm / 49 inches
67.0 W
Annual energy consumption *1
98 kWh
Standby power consumption *2
<0.50 W
Off mode power consumption
Screen resolution
n/a
1920 (H) x 1080 (V)
*1: Energy consumption XYZ kWh per year, based on the power consumption of the television
operating 4 hours per day for 365 days. The actual energy consumption will depend on how the
television is used.
*2: When the TV is turned off with the remote control/standby button and no function is active.
Additional technical information
RF
Inputs
Sound Outputs
75 ohm Antenna / Analog / DVB
3 x HDMI, 2 x USB, 1 x SCART,
1 x RJ45 (Ethernet), 1 x Mini Component/YPbPr,
1 x Mini AV - Composite Video/CVBS & L/R Audio shared for
Composite Video/CVBS & Component/YPbPr
1 x 3.5mm Headphone/Audio out,
1 x Digital Optical Audio Out
Speaker / Amplifier Watts (RMS)
2 x 10 / 2 x 8
Voltage and power consumption
AC 220V ~ 240V; 50/60Hz
67/95/110W (home mode/standard/max)
(<0.5W in Standby)
Dimensions including stand (mm)
Net weight (Kgs)
Wall Mounting
1104W x 688H x 229D
11.4
VESA 200 x 200 (mm)
36
Sharp - User Guide - 50 51 - SHA-MAN-0142.indd Sec1:36
09/05/2016 17:27:09
General Information
TECHNICAL SPECIFICATION
Compatible files in USB Mode
Video Decoder
Media
File Ext.
Remark
Video
.mpg/.mpeg
/.dat
.ts/.trp/.tp/.
m2ts
MPEG-1, MPEG-2
MPEG-2, H.264,VC1,AVS
.vob
MPEG-2
.mp4
MPEG-4, Xvid, H.264
.rm/.rmvb
Movie
Audio
.mkv
.avi
Motion JPEG
.asf,wmv
.flv/.swf
.mp3
Rm codec
.wma/.asf
1920×1080
Max Data Rate:
40 Mbps
MPEG-1, MPEG-2, MPEG-4,
AAC, LPCM,
MP3, WMA,
AC3
H.264
MPEG-2, MPEG-4,
Xvid, H.264
Max Solution:
JPEG
H.264, AVC, Sorenson
H.263
MPEG1/2 (Layer1,
--
Layer2,Layer3)
10 Mbps
Max Solution:
1920×1080
Max Data Rate:
40 Mbps
Sample
Rate: 16KHz~48KHz
BitRate:
32K~448Kbps
BitRate:
128Kbps~320Kbps
Sampling rate
WMA pro
BitRate:
--
OGG
.m4a/.aac
.a
AAC HEAAC
Sample Rate:
Sample Rate:
Bit Rate:
.jpg/
Photo
Progressive JPEG
.jpeg
Baseline JPEG
.bmp
BMP
.png
Non-Interlaced
Interlaced
: 8KHz-48KHz
<768Kbps
Sampling rate
.ogg
640×480
Max Data Rate:
VC1
WMA
Music
Max Solution:
: ~96KHz
~48KHz
8K~48KHz
24K~384Kbps
Max Resolution:
1024×768
Max Resolution:
1920×8×1088×8
Max Resolution:
9600×6400
Max Resolution:
9600×6400
Max Resolution:
1200×800
37
Sharp - User Guide - 50 51 - SHA-MAN-0142.indd Sec1:37
09/05/2016 17:27:09
Sharp - User Guide - 50 51 - SHA-MAN-0142.indd Sec1:38
09/05/2016 17:27:09
Sharp - User Guide - 50 51 - SHA-MAN-0142.indd Sec1:39
09/05/2016 17:27:09
UMC Poland sp. z o.o.
Ostaszewo 57B, 87-148 Łysomice,
Poland
Assembled in Europe
www.sharp.eu
SHA/MAN/0164
Sharp - User Guide - 50 51 - SHA-MAN-0142.indd Sec1:40
09/05/2016 17:27:09
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising