Samsung | AJ026RBJDEG/EU | User guide | Samsung AJ026RBJDEG/EU User guide

Samsung AJ026RBJDEG/EU User guide
Air conditioner
User manual
AJ***RBJDEG
•• Thank you for purchasing this Samsung air conditioner.
•• Before operating this unit, please read this user manual carefully and retain it for future
reference.
Contents
Safety Information
3
Safety Information
3
At a Glance
11
Indoor Unit Overview
11
Remote Control Overview
12
Basic Operation
14
Operation Modes
14
Advanced Operation
18
Setting the On or Off timer
18
Using the Purity Function
20
Controlling Indoor Units
22
Cleaning and Maintenance
23
Cleaning the Air Conditioner
23
Maintaining the Air Conditioner
26
Appendix
28
Troubleshooting
28
Operation Features
32
Information about refrigerant
32
Important information: regulation regarding the refrigerant used
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment)
(Applicable in countries with separate collection systems)
This marking on the product, accessories or literature indicates that the product and its electronic accessories
(e.g. charger, headset, USB cable) should not be disposed of with other household waste at the end of their
working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal,
please separate these items from other types of waste and recycle them responsibly to promote the sustainable
reuse of material resources.
Household users should contact either the retailer where they purchased this product, or their local government
office, for details of where and how they can take these items for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of the purchase contract. This
product and its electronic accessories should not be mixed with other commercial wastes for disposal.
For information on Samsung’s environmental commitments and product-specific regulatory obligations, e.g. REACH,
WEEE, Batteries, visit : samsung.com/uk/aboutsamsung/samsungelectronics/corporatecitizenship/data_corner.html
2 English
Safety Information
WARNING
Hazards or unsafe practices that may result in severe personal injury or
death.
CAUTION
Hazards or unsafe practices that may result in minor personal injury or
property damage.
Follow directions.
Do NOT attempt.
Make sure the machine is grounded to prevent electric shock.
Cut-off the power supply.
Do NOT disassemble.
FOR INSTALLATION
WARNING
Use the power line with the power specifications of the product or
higher and use the power line for this appliance only. In addition, do not
use an extension line.
• Extending the power line may result in electric shock or fire.
• Do not use an electric transformer. It may result in electric shock or fire.
• If the voltage/frequency/rated current condition is different, it may cause
fire.
The installation of this appliance must be performed by a qualified
technician or service company.
English 3
Safety Information
Before using your new air conditioner, please read this manual thoroughly
to ensure that you know how to safely and efficiently operate the extensive
features and functions of your new appliance.
Because the following operating instructions cover various models, the
characteristics of your air conditioner may differ slightly from those
described in this manual. If you have any questions, call your nearest
contact centre or find help and information online at www.samsung.com.
Safety Information
Safety Information
• Failing to do so may result in electric shock, fire, explosion, problems
with the product, or injury and may also void warranty on the installed
product.
Install a switch and circuit breaker dedicated to the air conditioner.
• Failing to do so may result in electric shock or fire.
Fix the outdoor unit firmly so that the electric part of the outdoor unit
is not exposed.
• Failing to do so may result in electric shock or fire, explosion, or problems
with the product.
Do not install this appliance near a heater, inflammable material. Do
not install this appliance in a humid, oily or dusty location, in a location
exposed to direct sunlight and water (rain drops). Do not install this
appliance in a location where gas may leak.
• This may result in electric shock or fire.
Never install the outdoor unit in a location such as on a high external
wall where it could fall.
• If the outdoor unit falls, it may result in injury, death or property damage.
This appliance must be properly grounded. Do not ground the appliance
to a gas pipe, plastic water pipe, or telephone line.
• Failure to do so may result in electric shock, fire, an explosion, or other
problems with the product.
• Never plug the power cord into a socket that is not grounded correctly
and make sure that it is in accordance with local and national codes.
CAUTION
Install your appliance on a level and hard floor that can support its
weight.
• Failing to do so may result in abnormal vibrations, noise, or problems
with the product.
Install the draining hose properly so that water is drained correctly.
• Failing to do so may result in water overflowing and property damage.
Avoid adding drain to waste pipes as odours may arise in the future.
The product shall be stored in a room with no ignition sources (e.g. open
flames, gas appliance, electric heater, etc.).
4 English
When installing the outdoor unit, make sure to connect the draining
hose so that draining is performed correctly.
• The water generated during the heating operation by the outdoor unit
may overflow and result in property damage.
In particular, in winter, if a block of ice falls, it may result in injury, death
or property damage.
Do not install the product in a place where thermo-hygrostat is needed
(such as server room, machinery room, computer room, etc.)
• Those places do not provide guaranteed operation condition of the
product therefore performance can be poor in these places.
FOR POWER SUPPLY
WARNING
When the circuit breaker is damaged, contact your nearest service
centre.
Do not pull or excessively bend the power line. Do not twist or tie the
power line. Do not hook the power line over a metal object, place a
heavy object on the power line, insert the power line between objects,
or push the power line into the space behind the appliance.
• This may result in electric shock or fire.
CAUTION
When not using the air conditioner for a long period of time or during a
thunder/lightning storm, cut the power at the circuit breaker.
• Failing to do so may result in electric shock or fire.
FOR USING
WARNING
If the appliance is flooded, please contact your nearest service centre.
• Failing to do so may result in electric shock or fire.
English 5
Safety Information
• Note that the refrigerant has no odour.
Safety Information
Safety Information
If the appliance generates a strange noise, a burning smell or smoke,
unplug the power plug immediately and contact your nearest service
centre.
• Failing to do so may result in electric shock or fire.
In case of a malfunction, immediately stop operation of the air
conditioner and disconnect the entire power system. Then consult the
authorized service personnel.
In the event of a gas leak (such as propane gas, LP gas, etc.), ventilate
immediately without touching the power line. Do not touch the
appliance or power line.
• Do not use a ventilating fan.
• A spark may result in an explosion or fire.
To reinstall the air conditioner, please contact your nearest service
centre.
• Failing to do so may result in problems with the product, water leakage,
electric shock, or fire.
• A delivery service for the product is not provided. If you reinstall the
product in another location, additional construction expenses and an
installation fee will be charged.
• Especially, when you wish to install the product in an unusual location
such as in an industrial area or near the seaside where it is exposed to the
salt in the air, please contact your nearest service centre.
Do not touch the circuit breaker with wet hands.
• This may result in electric shock.
Do not turn the air conditioner off with the circuit breaker while it is
operating.
• Turning the air conditioner off and then on again with the circuit breaker
may cause a spark and result in electric shock or fire.
After unpacking the air conditioner, keep all packaging materials well
out of the reach of children, as packaging materials can be dangerous to
children.
• If a child places a bag over its head, it may result in suffocation.
Do not touch the front panel with your hands or fingers during the
heating operation.
6 English
Do not insert your fingers or foreign substances into the outlet when
the air conditioner is operating or the front panel is closing.
• Take special care that children do not injure themselves by inserting their
fingers into the product.
Do not insert your fingers or foreign substances into the inlet/outlet
when the air conditioner is operating or the front panel is closing.
• Take special care that children do not injure themselves by inserting their
fingers into the product.
Do not strike or pull the air conditioner with excessive force.
• This may result in fire, injury, or problems with the product.
Do not place an object near the outdoor unit that allows children to
climb onto the machine.
• This may result in children seriously injuring themselves.
Do not use this air conditioner for long periods of time in badly
ventilated locations or near infirm people.
• Since this may be dangerous due to a lack of oxygen, open a window at
least once an hour.
Do not use means to accelerate the defrost operation or to clean, other
than those recommended by Samsung.
Do not pierce or burn.
Be aware that refrigerants may not contain an odour.
If any foreign substance such as water has entered the appliance, cut
the power by unplugging the power plug and turning the circuit breaker
off and then contact your nearest service centre.
• Failing to do so may result in electric shock or fire.
Do not attempt to repair, disassemble, or modify the appliance yourself.
• Do not use any fuse (such as copper, steel wire, etc.)other than the
standard fuse.
• Failing to do so may result in electric shock, fire, problems with the
product, or injury.
English 7
Safety Information
• This may result in electric shock or burns.
Safety Information
Safety Information
CAUTION
Do not place objects or devices under the indoor unit.
• Water dripping from the indoor unit may result in fire or property
damage.
Check that the installation frame of the outdoor unit is not broken at
least once a year.
• Failing to do so may result in injury, death or property damage.
Max current is measured according to IEC standard for safety and
current is measured according to ISO standard for energy efficiency.
When the air conditioner does not operate properly for cooling or
heating, there is a possibility of refrigerant leakage. If any leakage, stop
operation, ventilate the room, and consult your dealer immediately for
recharging refrigerant.
The refrigerant is not harmful. However, if it comes in contact with fire,
it may generate harmful gases and there is risk of fire.
During transportation of the indoor unit, the pipe lines shall be covered
with brackets for protection. Do not move the product with holding the
pipe lines.
• It may cause gas leakage.
Do not install the product in a ship or a vehicle (such as a campervan).
• Salt, vibration or other environmental factor may cause the product
malfunction, electric shock or fire.
Do not stand on top of the appliance or place objects (such as laundry,
lighted candles, lighted cigarettes, dishes, chemicals, metal objects, etc.)
on the appliance.
• This may result in electric shock, fire, problems with the product, or injury.
Do not operate the appliance with wet hands.
• This may result in electric shock.
Do not spray volatile material such as insecticide onto the surface of the
appliance.
• As well as being harmful to humans, it may also result in electric shock,
fire or problems with the product.
8 English
Safety Information
Do not drink the water from the air conditioner.
• The water may be harmful to humans.
Do not apply a strong impact to the remote controller and do not
disassemble the remote controller.
Do not touch the pipes connected with the product.
• This may result in burns or injury.
Do not cut or burn the refrigerant container or pipings.
Do not point the air direction to the fireplace or heater.
Do not use this air conditioner to preserve precision equipment, food,
animals, plants or cosmetics, or for any other unusual purposes.
• This may result in property damage.
Avoid directly exposing humans, animals or plants from the air flow
from the air conditioner for long periods of time.
• This may result in harm to humans, animals or plants.
This appliance is not intended for use by persons (including children)
with reduced physical, sensory or mental capabilities, or lack of
experience and knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person responsible for
their safety. Children should be supervised to ensure that they do not
play with the appliance.
For use in Europe: This appliance can be used by children aged from 8
years and above and persons with reduced physical, sensory or mental
capabilities or lack of experience and knowledge if they have been
given supervision or instruction concerning use of the appliance in a
safe way and understand the hazards involved. Children shall not play
with the appliance. Cleaning and user maintenance shall not be made by
children without supervision.
English 9
Safety Information
Safety Information
FOR CLEANING
WARNING
Do not clean the appliance by spraying water directly onto it. Do not
use benzene, thinner, alcohol or acetone to clean the appliance.
• This may result in discoloration, deformation, damage, electric shock or fire.
Before cleaning or performing maintenance, unplug the air conditioner
from the wall socket and wait until the fan stops.
• Failing to do so may result in electric shock or fire.
CAUTION
Take care when cleaning the surface of the heat exchanger of the
outdoor unit since it has sharp edges.
• To avoid cutting your fingers, wear thick cotton gloves when cleaning it.
• This should be done by a qualified technician please contact your installer
or service centre.
Do not clean the inside of the air conditioner by yourself.
• For cleaning inside the appliance, contact your nearest service centre.
• When cleaning the internal filter, refer to the descriptions in the ‘Cleaning
and Maintaining’ section.
• Failure to do may result in damage, electric shock or fire.
• Make sure to prevent any injury from sharp edges of the surface when
handling the heat exchanger.
10 English
Indoor Unit Overview
Main parts
Blade pin lever
Air outlet
(Cooling/Heating)
Mode indicator and
Control button
Air intake
At a Glance
Blade pin lever
Air outlet (Heating)
Display
Mode indicator and Control button
1
2
3
4
5
6
7
1 IONIZER INDICATOR
Ionizer icon will light up when Ionizer is operating.
2 FAN MODE INDICATOR
This icon will light up when the unit is operating in Fan mode.
3 TIMER INDICATOR
Timer icon will light up when On/Off Timer function is set.
4 DEICE INDICATOR
This icon will light up when the unit starts to de-ice.
5 POWER BUTTON
Turn On/Off the air conditioner. The air conditioner will operate
in Auto mode.
6 POWER INDICATOR
Power icon will light up when the unit is in operation.
7 REMOTE CONTROL SENSOR
Aim the remote control toward this spot on the air conditioner.
NOTE
• Your air conditioner and display may look slightly different from the illustration shown
above depending on your model.
• Each time you press the button, a short beep will sound and the unit is properly operating.
English 11
Remote Control Overview
05
01
06
02
07
08
03
09
04
At a Glance
10
16
11
17
10
11
12
13
14
15
16
17
18
19
20
21
Settings indicator
Power button
Temperature button
Options button
Timer button
Direction button/Selection button
Vertical air swing button
Mode button
Fan speed button
Horizontal air swing button
Settings button
SET button
NOTE
12
18
13
•
Although Horizontal air swing/Turbo/Quiet/
Filter Reset/Blade 1234 is displayed on the
remote control display, it is not available on
this model.
•
The air conditioner may not be operated by
the remote control if the controller is placed
close to strong light such as a fluorescent
lamp or neon sign. In this case, use the
remote control right in front of the remote
control receiver of the indoor unit.
•
If other electrical products are operated by the
remote control, call your nearest service center.
•
To silence the beep sound, press the
Settings → <, > or Settings → (Beep)
blinking → SET button. When you press
the Settings → <, > or Settings → (Beep)
blinking → SET button again, the beep
sound will be active again.
19
20
14
21
15
01
02
03
04
05
06
07
08
09
Set temperature indicator
Timer option indicator
Operation mode indicator
Options indicator
Low battery indicator
Transmit indicator
Fan speed indicator
Vertcal air swing indicator
Horizontal air swing indicator
12 English
Replacing batteries
When the
icon appears in the remote control
display, replace the batteries with new ones. Two
1.5V AAA type batteries are required.
Correct disposal of batteries in this product
This marking on the battery, manual or packaging indicates that the batteries in this product should not be
disposed of with other household waste at the end of their working life. Where marked, the chemical symbols Hg,
Cd or Pb indicate that the battery contains mercury, cadmium or lead above the reference levels in EC Directive
2006/66.
Storing the remote control
If the remote control will not be used for an
extended period of time, store it in the remote
control holder with the batteries removed.
CAUTION
• Make sure that water does not come into
the remote control.
English 13
At a Glance
two 1.5V AAA type batteries
Operation Modes
Auto
In Auto mode, the air conditioner will automatically adjust
the temperature and fan speed to maintain your fresh
environment.
•
When the indoor temperature is too high, the powerful
cool breeze is generated and when the indoor room
becomes cool enough, the soft breeze is generated.
Cool
Basic Operation
The Cool mode is frequently used and you can freely control
the temperature, fan speed, and air flow direction in Cool
mode.
•
When you select the Heat mode while the Cool mode is
on, the Cool mode is cancelled.
Dry
The air conditioner in Dry mode acts like a dehumidifier by
removing moisture from the indoor air. The Dry mode will
provide you with fresh air even on a rainy day.
Fan
The Fan mode provides you with a breeze just like a fan to
make fresh environment for you.
14 English
Heat
In Heat mode, you can warm your room even in fall and
winter.
The fan may not commence immediately to avoid
generating a cold breeze.
•
In Heat mode, defrost operation may be performed to
remove the frost formed on the outdoor unit. (When the
frost is removed by the defrost operation in Heat mode,
steam is generated from the outdoor unit.)
•
If you stop operating the air conditioner after heating
operation, the fan will operate for some time to cool the
indoor unit.
•
When you select the Cool mode while the Heat mode is
on, the Heat mode is cancelled.
NOTE
•
When the outdoor temperature is relatively low and the
humidity is relatively high in Heat mode, the outdoor unit's
heating capacity may decrease due to the frost formed on
the outdoor heat exchanger. The defrost operation removes
the frost formed on the heat exchanger of the outdoor unit
for 5 to 12 minutes. During the defrost operation, the indoor
unit does not generate breeze in order to prevent cold
breeze blowing out.
–– The interval between defrost operations can decrease
depending on the amount of the frost formed on the
outdoor unit.
–– The interval between defrost operations can also
decrease depending on the humidity level in the air.
English 15
Basic Operation
•
Operation Modes
Turning the air conditioner on
Press the
button to operate the air conditioner.
Selecting the operation mode
Press the
button to select an operation mode.
►
►
►
Basic Operation
►
Adjusting the temperature
Press the
button to adjust the temperature.
Mode
Temperature control
Auto/Cool/
Dry
Adjust by 1 °C between 18 °C and 30 °C.
Heat
Adjust by 1 °C between 16 °C and 30 °C.
Fan
Temperature cannot be adjusted.
Selecting the fan speed
Press the
button to adjust the fan speed.
Mode
Auto/Dry
(Auto)
Cool/Heat
(Auto),
Fan
16 English
Available fan speeds
(Low),
(Low),
(Med),
(Med),
(High)
(High)
Selecting air flow direction
Keep the air flow in a constant direction by stopping the
movements of the vertical and horizontal air flow blades.
In operation ►
NOTE
•
If you adjust the vertical air flow blade manually, it may not
close completely when you turn off the air conditioner.
Basic Operation
Remote control display
Horizontal air flow (manual)
Keep the horizontal air flow in a constant direction by
changing the directions of the horizontal air flow blades
manually.
NOTE
•
Although you press the
work.
button, this function does not
CAUTION
• To prevent personal injury, make sure that you
change the directions of the horizontal air flow
blades after stopping the movements of the vertical
air flow blade.
English 17
Setting the On or Off timer
The actual product may differ slightly from the image depicted below.
Setting the On timer
When the air conditioner is turned off:
1. Press the
button to select (On).
• The (On) indicator will keep blinking and you can set the time.
2. Press the
or
button to set the time.
• You can set the time in half hour intervals from
30 minutes (0.5 on the display) to 3 in hour intervals
from 3 to 24 hours.
• The time can be set from minimum 30 minutes to
maximum 24 hours.
3. Press the
button to complete the On timer setting.
Advanced Operation
• The (On) indicator and the set time of the timer will be
displayed on the remote control display.
• On timer setting will be cancelled if you don't press the
button within 10 seconds after setting the time.
Therefore, check for the (On) indicator on the remote
control display.
Remote control display
Press the
Cancel
the
or
► press the
button ► select (On) ► press
button ► set the timer to
button
Additional options available in the On timer
Select the mode in the following order: (Auto) ► (Cool) ► (Dry) ► (Fan) and ►
(Heat).
You can adjust the temperature after timer setting is completed.
Temperature adjustment is only available in Auto, Cool, Dry, and Heat modes. In Fan
mode, the temperature cannot be adjusted.
NOTE
• When On timer setting is completed, the setting will be displayed for 3 seconds, and then only
the (On) indicator will remain on the remote control display.
• You cannot set the Fan speed when setting the On timer.
18 English
Setting the Off timer
When the air conditioner is turned on:
1. Press the
button to select (Off).
• The (Off) indicator will keep blinking and you can set the time.
2. Press the
or
button to set the time.
• You can set the time in half hour intervals from
30 minutes (0.5 on the display) to 3 hours and in hour
intervals from 3 to 24 hours.
• The time can be set from minimum 30 minutes to
maximum 24 hours.
3. Press the
button to complete the Off timer setting.
• The (Off) indicator and the set time of the timer will be
displayed on the remote control display.
• Off timer setting will be cancelled if you don't press the
button within 10 seconds after setting the time.
Therefore, check for the (Off) indicator on the remote
control display.
Press the
Cancel
the
or
press the
button ► select (Off) ► press
button ► set the timer to
►
button
NOTE
•
Only the latest timer setting will be applied between the Off
timer and good’ sleep off timer functions.
Combining On timer and Off timer
When the air conditioner is turned off
When the air conditioner is turned on
When the set time on On timer is less than that on When the set time on On timer is greater than
Off timer
that on Off timer
e.g. On timer: 3 hours, Off timer: 5 hours
•
e.g. On timer: 3 hours, Off timer: 1 hour
The air conditioner will be turned on after
•
3 hours from the moment you have set the
timer and the air conditioner will remain on for
2 hours and then be turned off automatically.
The air conditioner will be turned off after
1 hour from the moment you have set the
timer and will be automatically turned on after
2 hours from the moment it was turned off.
NOTE
• The set times for the On timer and the Off timer should be different from each other.
• After the On timer or the Off timer is set, the setting can be cancelled by pressing the
button.
English 19
Advanced Operation
Remote control display
Using the Purity function
Purity function will remove harmful materials in the air to provide you clean and healthy environment.
You can select this function additionally while the air conditioner is in operation.
When the air conditioner is turned on
1. Press the
button.
2. Press the
,
or
indicator starts blinking.
3. Press the
• (
button until the (
)
button to set the Purity function.
)(
) indicator will be displayed on the remote
controller display and Ionizer function will begin.
Cancel
Press the
button ► press the
,
or
to make the (
) iindicator blink and press
the
button.
NOTE
Advanced Operation
Remote control display
20 English
•
You may select the purity function additionally during Auto/
Cool/Dry/Heat mode and you can adjust the temperature.
•
If the purity function is selected additionally in fan mode,
the temperature cannot be adjusted.
•
When the air conditioner and the purity function are turned
on simultaneously and you press the Power button, both air
conditioner and purity function will stop operation.
•
You can still use the purity function when the On timer is set
with the air conditioner is turned off.
•
There will not be much difference on energy consumption
and operating noise when the purity function is selected
additionally while the air conditioner is turned on.
When the air conditioner is turned off
1. Press the
button.
2. Press the
button when (
purity function.
• (
) indicator blinks to begin
)(
) indicator will be displayed on the remote
controller display and Ionizer function will begin.
Cancel
Press the
button to make the (
blink and press the
button.
) indicator
Advanced Operation
Remote control display
English 21
Controlling Indoor Units
You can individually select and operate indoor units among 4 indoor units.
When the air conditioner is turned on:
1. Press the
button.
2. Press the
,
or
indicator starts blinking.
3. Press the
button until the (Zone)
button to select the indoor unit to operate.
• You can select individual units in order of 1 to 4 or select all
indoor units at one time.
Advanced Operation
Remote control display
22 English
Cleaning the Air Conditioner
Cleaning the indoor unit exterior
Wipe the surface of the unit with a slightly wet or dry cloth when
needed. Wipe off dirt from odd-shaped areas by using a soft brush.
CAUTION
• Do not use alkaline detergent, sulphuric acid, hydrochloric acid, or
organic solvents (such as thinner, kerosene, and acetone) to clean
the surfaces.
• Do not put any stickers on it as this can damage the surface of the
indoor unit.
Cleaning the air filter
When cleaning the filter, make sure to unplug the power from the unit. No special tools are needed to clean it.
Air filter
Washable air filter captures large particles from the air. The filter is cleaned with a vacuum or by
hand washing. Filter clean indicator will light up when air filter need to be cleaned.
1. Open the front panel.
Grab the top portion of the front panel and pull the front cover towards yourself. Unhook the
safety string and lift up the front panel.
Auto
Off
Auto
Off
3. Clean the Air filter with a vacuum cleaner or soft brush. If dust is too heavy, then rinse it with
running water and dry it in a ventilated area.
English 23
Cleaning and Maintenance
2. Grab the handle and slightly press the air filter down to bent the air filter. Then, pull the Air filter
towards you and lift it up to remove the Air filter.
Cleaning the Air Conditioner
NOTE
• For the best conditions, repeat every two weeks.
• If the Air filter dries in a confined (or humid) area, odors may generate. If it occurs, re-clean
and dry it in a well-ventilated area.
4. Insert the Air filter back in its original position.
5. Close the front panel.
Grab the side of the front panel and place the bottom first, then push the panel.
6. Press the Filter Reset button on the remote control.
Anti-allergy filter
Washable Anti-allergy filter leads to reduction in allergens that thrive in polluted air. The filter is
cleaned with a vacuum or by hand washing.
1. Open the front panel.
Grab the top portion of the front panel and pull the front cover towards yourself. Unhook the
safety string and lift up the front panel.
Cleaning and Maintenance
2. Grab the handle and slightly press the air filter down to bent the air filter. Then, pull the Air filter
towards you and lift it up to remove the Air filter.
3. Pull and slide out the Anti-allergy filter.
4. Clean the Anti-allergy filter with a vacuum cleaner or soft brush. Then rinse it with running water
and dry it in a ventilated area.
24 English
5. Install the Anti-allergy filter back in position.
6. Close the front panel.
Grab the side of the front panel and place the bottom first, then push the panel.
NOTE
• Clean the Anti-allergy filter every 3 months. The cleaning term may differ on usage and
environmental conditions.
Replacing the air filter
Replacement filter may be purchased from the retail store or ordered from the dealer where you
purchased the unit. If you cannot find one, please call a contact center.
Deodorizing filter
Deodorizing filter absorbs efficiently cigarette smoke, pet odors and other unpleasant smells.
Deodorizing filter cleaning is simple, just remove old filter and install a new one.
1. Open the front panel.
Grab the top portion of the front panel and
pull the front cover towards yourself. Unhook
the safety string and lift up the front panel.
2. Grab the handle and slightly press the air filter
down to bewnt the air filter. Then, pull the Air
filter towards you and lift it up to remove the
Air filter.
3. Pull and slide out the Deodorizing filter.
Cleaning and Maintenance
4. Install the new Deodorizing filter back in position.
5. Close the front panel.
Grab the side of the front panel and place the bottom first, then push the panel.
NOTE
• The replacement timing of the Deodorizing filter differs depending on usage and
environmental conditions.
• Even if Deodorizing and Anti-allergy filters are installed in an inverted position it will not
significantly affect its filtration system.
English 25
Maintaining the Air Conditioner
If the air conditioner will not be used for an extended period of time, dry the
air conditioner to maintain in best conditions.
1. Dry the air conditioner thoroughly by operating in Fan mode for 3 to 4 hours and
disconnect the power plug. There may be internal damage if moisture is left in components.
2. Before using the air conditioner again, dry the inner components of the air conditioner
again by running in Fan mode for 3 to 4 hours. This helps remove odours that may have
generated from dampness.
Periodical checks
Refer to the following chart to maintain the air conditioner properly.
Type
Description
Clean the air filter (1).
Indoor unit
Monthly
Every 4
months
l
Clean the condensate drain pan (2).
l
Thoroughly clean the heat exchanger (2).
l
Clean the condensate drain pipe (2).
l
Replace the remote control batteries (1).
Clean the heat exchanger on the outside
of the unit (2).
Outdoor unit
Once a
year
l
l
Cleaning and Maintenance
Clean the heat exchanger on the inside
of the unit (2).
l
Clean the electric components with jets
of air (2).
l
Verify that all the electric components
are firmly tightened (2).
l
Clean the fan (2).
l
Verify that all the fan assembly is firmly
tightened (2).
l
Clean the condensate drain pan (2).
l
NOTE
• The checks and maintenance operations described above are essential to guarantee the
efficiency of the air conditioner. The frequency of these operations may vary depending on
the characteristics of the area, the amount of dust, etc.
a. The above mentioned operations should be performed more frequently if the area of
installation is very dusty.
b. These operations must always be performed by qualified personnel. For more detailed
information, refer to Installation Manual.
26 English
Internal protections via the unit control system
This internal protection operates if an internal fault occurs in the air conditioner.
Type
Description
Against cold air
The internal fan will be off against cold air when the heat pump is
heating.
De-ice cycle
The internal fan will be off against cold air when the heat pump is
heating.
Anti-protection of
internal battery
The compressor will be off to protect internal battery when the air
conditioner operates in Cool mode.
Protect compressor
The air conditioner does not start operating immediately to protect
the compressor of the outdoor unit after it has been started.
NOTE
•
If the heat pump is operating in Heat mode, the de-ice cycle is actuated to remove frost
from an outdoor unit that may have deposited at low temperatures.
•
The internal fan is switched off automatically and restarted only after the de-ice cycle is
completed.
•
When the de-ice cycle is operating,it may generate strange sound. It is normal operation for
product safety.
Cleaning and Maintenance
English 27
Troubleshooting
Refer to the following chart if the air conditioner operates abnormally. This may save time and
unnecessary expense.
Problem
Solution
The air conditioner
does not operate
at all.
• Check if the power plug is properly connected.
• Check whether the auxiliary power switch (MCCB, ELB) is turned on.
• If the auxiliary power switch (MCCB, ELB) is turned off, the air
conditioner does not work although you press the
(Power)
button.
• When you clean the air conditioner or do not use it for an extended
period of time, turn off the auxiliary power switch (MCCB, ELB).
• After the air conditioner is not used for an extended period of time,
be sure to turn on the auxiliary power switch (MCCB, ELB) 6 hours
before starting operation.
NOTE
• The auxiliary power switch (MCCB, ELB) is sold separately.
• Make sure that auxiliary power switch (MCCB, ELB) is installed
in the distribution box inside the building.
• If the air conditioner is turned off by the Timed off function, turn on
the air conditioner again by pressing the
(Power) button.
Appendix
The temperature
does not change.
• Check whether the Fan mode is running. In the Fan mode, the air
conditioner controls the set temperature automatically, and you
cannot change the set temperature.
Warm air does not
come out of the air
conditioner.
• Check whether the outdoor unit is designed for cooling only. In
this case, warm air does not come out although you select the Heat
mode.
• Check whether the remote control is designed only for cooling only.
Use a remote control that supports both cooling and heating.
The fan speed does
not change.
• Check whether the Auto or Dry mode is running. In these modes, the
air conditioner controls the fan speed automatically, and you cannot
change the fan speed.
The wireless
remote control
does not operate.
• Check whether the batteries are discharged. Replace the batteries
with new ones.
• Make sure that nothing is blocking the remote control sensor.
• Check whether any strong lighting sources are near the air
conditioner. Strong light which comes from fluorescent bulbs or
neon signs may interfere with the remote control.
28 English
Problem
Solution
• Check whether the
indicator is displayed at the bottom right
of the remote control display. In this case, turn off both the air
conditioner and the auxiliary power switch, and then contact a
service centre.
The air conditioner
is not turned on or
off immediately
with the wired
remote control.
• Check whether the wired remote control is set for group control. In
this case, the air conditioners connected to the wired remote control
are turned on or off sequentially. This operation takes up to 32
seconds.
The Timed on/off
function does not
operate.
• Check whether you pressed the
(SET) button on the remote
control after setting the on/off time. Set the on/off time.
The indoor unit
display blinks
continuously.
• Turn on the air conditioner again by pressing the
(Power)
button.
• Turn off and then turn on the auxiliary power switch, and then turn
on the conditioner.
• If the indoor unit display is still blinking, contact a service centre.
I want to get
cooler air.
• Operate the air conditioner with a electric fan to save energy and
enhance the cooling efficiency.
The air is not cool
or warm enough.
• In the Cool mode, cool air does not come out if the set temperature
is higher than the current temperature.
–– MR-EH00 remote control: Press the Temperature button
repeatedly until the set temperature (minimum: 18°C) is set to
lower than the current temperature.
–– AR-KH00E remote control: Press the Temperature button on the
remote control. Then rotate the Wheel until the set temperature
(minimum: 18°C) is set to lower than the current temperature.
• In the Heat mode, warm air does not come out if the set temperature
is lower than the current temperature.
–– MR-EH00 remote control: Press the Temperature button
repeatedly until the set temperature (maximum: 30°C) is set to
higher than the current temperature.
–– AR-KH00E remote control: Press the Temperature button on the
remote control. Then rotate the Wheel until the set temperature
(maximum: 30°C) is set to higher than the current temperature.
English 29
Appendix
The wired remote
control does not
operate.
Troubleshooting
Problem
The air is not cool
or warm enough.
The air conditioner
makes strange
noises.
Appendix
Unpleasant odours
permeate the
room.
30 English
Solution
• Both cooling and heating do not operate in the Fan mode. Select the
Cool, Heat, Auto, or Dry mode.
• Check whether the air filter is blocked with dirt. A dusty filter may
decrease the cooling and heating efficiencies. Clean the air filter
frequently.
• If a cover is on the outdoor unit or any obstacle is present near the
outdoor unit, remove them.
• Install the outdoor unit in a well-ventilated place. Avoiding places
exposed to direct sunlight or close to a heating appliance.
• Place a sunscreen over the outdoor unit to protect it from direct
sunlight.
• If the indoor unit is installed in a place exposed to direct sunlight,
pull the curtains on the windows.
• Close the windows and doors to maximize the cooling and heating
efficiencies.
• If the Cool mode is stopped and then started immediately, cool air
comes out after about 3 minutes to protect the compressor of the
outdoor unit.
• When the Heat mode is started, warm air does not come out
immediately to prevent cool air from coming out at the beginning.
• If the refrigerant pipe is too long, the cooling and heating
efficiencies may be decreased. Avoid exceeding the maximum pipe
length.
• In certain conditions (especially, when the outdoor temperature is
lower than 20°C), a hissing, rumbling, or splashing sound may be
heard while the refrigerant is circulating through the air conditioner.
This is a normal operation.
• When you press the
(Power) button on the remote control, noise
may be heard from the drain pump inside the air conditioner. This
noise is a normal sound.
• If the air conditioner is running in a smoky area or if there is a smell
entering from outside, ventilate the room properly.
• If both indoor temperature and indoor humidity are high, operate
the air conditioner in the Clean or Fan mode for 1 to 2 hours.
• If the air conditioner has not been operated for an extended period
of time, clean the indoor unit and then operate the air conditioner
in the Fan mode for 3 to 4 hours to dry the inside of the indoor unit
for removal of unpleasant odours.
• If the air filter blocked with dirt, clean the air filter.
Problem
Solution
Steam is produced
on the indoor unit.
• In winter, if the indoor humidity is high, steam may be produced
around the air outlet while the defrost function is running. This is a
normal operation.
The outdoor unit
fan continues to
operate when the
air conditioner is
turned off.
• W hen the air conditioner is turned off, the outdoor unit fan may
continue to operate to reduce noise of the refrigerant gas. This is a
normal operation.
Water drops
from the piping
connections of the
outdoor unit.
• Condensation may develop due to the difference in temperature.
This is a normal condition.
Steam is produced
on the outdoor
unit.
• In winter, when the air conditioner runs in the Heat mode, the frost
on the heat exchanger melts and steam may be produced. This is a
normal operation, neither product malfunction nor a fire.
Appendix
English 31
Operation Features
Operating temperature and humidity
Mode
Outdoor temperature
Indoor temperature
Indoor humidity
Cool mode
-5°C to 32°C
18°C to 32°C
80% or less
Heat mode
-15°C to 24°C
30°C or less
-
Dry mode
-5°C to 43°C
18°C to 32°C
80% or less
CAUTION
• If you use the air conditioner at a relative humidity above 80%, it may cause a formation of
condensation and a leakage of water on the floor.
Information about refrigerant
Important information: regulation regarding the refrigerant used
This product contains fluorinated greenhouse gases.Do not vent gases into the atmosphere.
CAUTION
If the system contains 5 tCO2e or more of fluorinated greenhouse gases, it must be checked
for leakage at least once every 12 months, according to regulation No. 517/2014. This activity
must be covered by qualified personnel only. In the case of the situation above, the installer (or
authorized person with responsibility for final check) must provide a maintenance book, with
all the information recorded, according to REGULATION (EU) No. 517/2014 OF THE EUROPEAN
PARLIAMENT AND OF THE COUNCIL of 16 April 2014 on fluorinated greenhouse gases.
This indoor unit can be connected to an R-32 or R-410A outdoor unit.
Refrigenat type
GWP value
R-32
675
R-410A
2088
Appendix
• GWP: Global Warming Potential
• Calculating tCO2e: kg x GWP/1000
32 English
QUESTIONS OR COMMENTS?
COUNTRY
CALL
OR VISIT US ONLINE AT
UK
0330 SAMSUNG (7267864)
www.samsung.com/uk/
support
COUNTRY
CALL
OR VISIT US ONLINE AT
SWITZERLAND
0800 726 78 64 (0800-SAMSUNG)
www.samsung.com/ch/
support (German)
www.samsung.com/ch_fr/
support (French)
IRELAND (EIRE)
0818 717100
www.samsung.com/ie/
support
GERMANY
06196 77 555 77 *OTH
www.samsung.com/de/
support
CZECH
800 - SAMSUNG (800-726786)
www.samsung.com/cz/
support
FRANCE
01 48 63 00 00
www.samsung.com/fr/
support
SLOVAKIA
0800 - SAMSUNG (0800-726 786)
www.samsung.com/sk/
support
ITALIA
800-SAMSUNG (800.7267864)
www.samsung.com/it/
support
CROATIA
072 726 786
www.samsung.com/hr/
support
SPAIN
0034902172678
www.samsung.com/es/
support
BOSNIA
055 233 999
www.samsung.com/
support
PORTUGAL
808 207 267
www.samsung.com/pt/
support
MONTENEGRO
020 405 888
www.samsung.com/
support
LUXEMBURG
261 03 710
www.samsung.com/be_fr/
support
SLOVENIA
080 697 267 (brezplačna številka)
www.samsung.com/si/
support
NETHERLANDS
088 90 90 100
www.samsung.com/nl/
support
SERBIA
011 321 6899
www.samsung.com/rs/
support
ALBANIA
045 620 202
02-201-24-18
www.samsung.com/be/
support (Dutch)
www.samsung.com/be_fr/
support (French)
www.samsung.com/al/
support
BULGARIA
*3000 Цена в мрежата
0800 111 31 , Безплатна
телефонна линия
www.samsung.com/bg/
support
ROMANIA
*8000 (apel in retea)
08008-726-78-64
(08008-SAMSUNG) Apel GRATUIT
www.samsung.com/ro/
support
CYPRUS
8009 4000 only from landline, toll
free
GREECE
80111-SAMSUNG (80111 726 7864)
only from land line
(+30) 210 6897691 from mobile and
land line
LITHUANIA
8-800-77777
www.samsung.com/lt/
support
LATVIA
8000-7267
www.samsung.com/lv/
support
ESTONIA
800-7267
www.samsung.com/ee/
support
BELGIUM
NORWAY
21629099
www.samsung.com/no/
support
DENMARK
707 019 70
www.samsung.com/dk/
support
FINLAND
030-6227 515
www.samsung.com/fi/
support
0771 726 786
www.samsung.com/se/
support
SWEDEN
POLAND
801-172-678* lub +48 22 607-93-33*
Dedykowana infolinia do obsługi
zapytań dotyczących telefonów
http://www.samsung.com/
komórkowych:
pl/support/
801-672-678* lub +48 22 607-93-33*
* (opłata według taryfy operatora)
HUNGARY
0680SAMSUNG (0680-726-7864)
www.samsung.com/hu/
support
AUSTRIA
0800-SAMSUNG (0800-7267864)
[Only for KNOX customers] 0800
400848
[Only for Premium HA] 0800-366661
[Only for Dealers] 0810-112233
[Only for E-Store] 0800 100 232
www.samsung.com/at/
support
Suzhou SAMSUNG ELECTRONICS CO., LTD.
501, Suhong East Road Suzhou City, Jiangsu, China
Suzhou SAMSUNG ELECTRONICS CO., LTD. Export.
218, Jiepu Road, Industry Park, Suzhou, Jiangsu ,China
Samsung Electronics
Service Department
PO Box 12987, Blackrock, Co Dublin Ireland
or
Blackbushe Business Park, Yateley, GU46 6GG UK
This appliance is filled with R-32.
www.samsung.com/gr/
support
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising