Samsung | QB49R | Quick Setup Guide | Samsung QB49R Quick Setup Guide

Samsung QB49R Quick Setup Guide
Ports
1
Quick Setup Guide
2
3
QB43R QB49R QB55R QB65R QB75R
4
* Recommended hours of use per day of this product is under 16 hours. If the product is
used for longer than 16 hours a day, the warranty may be void.
* The colour and the appearance may differ depending on the product, and the content in
the manual is subject to change without prior notice to improve the performance.
* Download the user manual from the website for further details.
http://www.samsung.com/displaysolutions
7
8
9
0
1 Connect to a USB memory device.
* The USB ports on the product accept a maximum constant
current of 1.0A.
If the maximum value is exceeded, USB ports may not work.
2 Connects to MDC using a LAN cable. (10/100 Mbps)
3 Connects to MDC using an RS232C adapter.
4 DVI IN: Connects to a source device using a DVI cable or HDMIDVI cable.
MAGICINFO IN: Connects to a network box using DP-DVI cable to
use Magicinfo.
5 Connects to a source device using a HDMI cable or HDMI-DVI
cable.
6 Connect to a USB memory device.
* The USB ports on the product accept a maximum constant
current of 0.5A.
If the maximum value is exceeded, USB ports may not work.
7 Receives sound from a source device via an audio cable.
8 Outputs sound to an audio device via an audio cable.
9 Connects to an external IR cable that receives signals from the
remote control.
00Connects to MDC using an RS232C adapter.
6
5
The terms HDMI and HDMI High-Definition Multimedia Interface,
and the HDMI Logo are trademarks or registered trademarks of
HDMI Licensing LLC in the United States and other countries.
BN68-09661D-00
Parts
Checking the Components
Troubleshooting Guide
Contact the vendor where you purchased the product if any
components are missing.
The appearance of the components may differ from the images shown.
Issues
1
Solutions
The screen keeps
Check that the cable between the product
switching on and off. and the PC is connected correctly.
Check that the product is connected
correctly with a cable.
Quick Setup Guide
Warranty card
(Not available in
some locations)
No Signal is
displayed on the
screen.
Power cord
2
Batteries (AAA x 2)
(Not available in
some locations)
Remote Control
3
Not Optimum Mode
is displayed.
RS232C(IN) adapter
Speaker
HOLDER-CABLE
(Supported models:
QB65R, QB75R)
Holder-Ring x 4
BN68-09661D-00_QSG_QBR_INDIA_ENG.indd 1
1 Remote sensor
Press a button on the remote control pointing at the sensor on
the front of the product to perform the corresponding function.
* Using other display devices in the same space as the remote
control of this product can cause the other display devices to be
inadvertently controlled.
2 Power indicator
3 Power button
Turns the product on or off.
Issues
There is no image
on the screen and
the power indicator
blinks every 0.5 to 1
second.
Solutions
The display is turned off to save energy.
Press any key on the keyboard or move the
mouse to return to the previous screen.
Check that the source device connected to
the product is powered on.
Make sure that the batteries are correctly in
place (+/-).
Depending on the type of external device,
the screen may not display properly. In this
case, connect it with the HDMI Hot Plug
function turned On.
Check if the batteries are flat.
This message is displayed when a
signal from the graphics card exceeds
the product’s maximum resolution and
frequency.
The remote control
does not work.
Check for power failure.
Make sure that the power cord is
connected.
Check for any special lighting or neon signs
switched on in the vicinity.
Refer to the Standard Signal Mode Table
and set the maximum resolution and
frequency according to the product
specifications.
2019-06-17 오후 5:53:11
Connecting
andINUsing
a Source Device
HDMI IN 1 (ARC), HDMI
2
AUDIO OUT
HDMI IN 1 (ARC), HDMI IN 2
Connecting to a PC
Connecting the LAN Cable
HDMI IN 1 (ARC), HDMI IN 2
DP IN
DP IN
RJ45
Model Name
DVI/MAGICINFO IN
DVI/MAGICINFO
IN
DP
IN
HDMIAV/COMPONENT
IN 1 (ARC), HDMI IN
DCJ:
IN2
HDMI IN 1 (ARC), HDMI IN 2
DVI/HDMI AUDIO IN
DVI/HDMI AUDIO IN
DCJ:
DVI/HDMI/AUDIO
DVI/HDMI
AUDIO IN IN
HDMI IN 1 (ARC), HDMI IN 2
Display area
RS232C OUT
RS232C IN
107.9 cm
123.2 cm
138.7 cm
941.184 mm (H) x 529.416 mm (V)
1073.78 mm (H) x 604.0 mm (V)
1209.6 mm (H) x 680.4 mm (V)
Display area
QB65R
QB75R
163.9 cm
189.3 cm
1428.48 mm (H) x 803.52 mm (V)
1650.24 mm (H) x 928.26 mm (V)
AC100-240V~ 50/60Hz
Refer to the label at the back of the product as the standard voltage can vary in different countries.
Environmental
considerations
Connecting to MDC
QB55R
Size
Power Supply
RS232C IN
QB49R
Model Name
Panel
DVI/HDMI AUDIO IN
DVI/HDMI AUDIO IN
QB43R
Size
Panel
Use Cat7(*STP Type) cable for the connection. (10/100 Mbps)
*Shielded Twist Pair
DVI/MAGICINFO IN
Specifications
Operating
Temperature: 0 °C – 40 °C (32 °F – 104 °F)
Humidity: 10% – 80%, non-condensing
Storage
Temperature: -20 °C – 45 °C (-4 °F – 113 °F)
Humidity: 5% – 95%, non-condensing
* This device is a Class B digital apparatus.
* For detailed device specifications, visit the Samsung Electronics website.
* The PVC Free (except for accessory cables) logo is the self-declared trademark of Samsung.
- Accessory cables: signal cables and power cords
RJ45
RS232C OUT
DCJ:
AV/COMPONENT
DVI/PC/MAGICINFO
IN IN
DVI/PC/MAGICINFO
DVI/HDMI AUDIO IN IN
RS232C OUT
DVI/PC/HDMI/AUDIO
IN IN
DCJ:
DVI/HDMI/AUDIO
DVI/PC/HDMI/AUDIO IN
Connecting to a Video Device
RJ45
DVI/PC/MAGICINFO IN
RJ45
RS232C IN
RS232C OUT
DCJ: AV/COMPONENT IN
RGB IN
HDMI IN 1 (ARC), HDMI IN 2
RGB IN
DCJ: DVI/HDMI/AUDIO IN
DVI/PC/HDMI/AUDIO IN
AUDIO IN AUDIO IN
DVI/HDMI
AUDIO IN
HUB
RS232C
RJ45 IN
DCJ: AV/COMPONENT IN
RISK OF ELECTRIC SHOCK DO NOT OPEN
HUB
RJ45
RS232C OUT
RS232C IN
HDMI IN 1 (ARC), HDMI IN 2
RJ45
DP IN
DVI/HDMI AUDIO IN
Connecting to an Audio System
DVI/MAGICINFO IN
AUDIO OUT
DVI/HDMI AUDIO IN
Please read the appropriate section that corresponds to the marking on your Samsung product before attempting to install the product.
CAUTION
RS232C OUT
RGB IN
AUDIO OUT
DCJ: DVI/HDMI/AUDIO
HDMI
ININ1 (ARC), HDMI ININ2
AUDIO
Warning! Important Safety Instructions
For details on how
HUBto use the MDC programme, refer to Help after
installing the programme.
The MDC programme is available on the website.
http://www.samsung.com/displaysolutions
RS232C IN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). THERE ARE NO USER SERVICEABLE
PARTS INSIDE. REFER ALL SERVICING TO QUALIFIED PERSONNEL.
»» If your equipment uses an AC adapter:
- Only use the AC adapter with your product by
Samsung.
- Do not use the power cord with other products.
»» Do not install this equipment in a confined space such as a case
or similar.
»» The slots and openings in the cabinet and in the back or bottom
are provided for necessary ventilation. The slots and openings
must never be blocked or covered.
»» The product should be located away from heat sources such as
radiators, heat registers, or other products that produce heat.
This symbol indicates that high voltage is present
inside. It is dangerous to make any kind of contact
with any internal part of this product.
This symbol indicates that this product has
included important literature concerning
operation and maintenance.
»» Do not place a vessel containing water (vases etc.) on this
apparatus, as this can result in a risk of fire or electric shock.
(Apparatus shall not be exposed to dripping or splashing)
»» The apparatus must be connected to an earthed MAINS socketoutlet (Class l Equipment only). Or Use only a properly grounded
plug and receptacle (Class l Equipment only).
»» To disconnect the apparatus from the mains, the plug must be
pulled out from the mains socket, therefore the mains plug shall
be readily operable.
»» As long as this unit is connected to the AC wall outlet, it is not
disconnected from the AC power source even if you turn off this
unit by POWER.
This product is RoHS compliant.
This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger,
headset, USB cable) should not be disposed of with other household waste at the end of their working life. To prevent
possible harm to the environment or human health from uncontrolled waste disposal, please separate these items from
other types of waste and recycle them responsibly to promote the sustainable reuse of material resources.
For more information on safe disposal and recycling visit our website www.samsung.com/in or contact our Helpline numbers
- 1800 40 SAMSUNG(1800 40 7267864) (Toll-Free)
Contact SAMSUNG WORLD WIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre.
Tel. 1800 40 SAMSUNG (1800 40 7267864) (Toll-Free)
www.samsung.com/in/support
HDMI IN 1 (ARC), HDMI IN 2
BN68-09661D-00_QSG_QBR_INDIA_ENG.indd 2
2019-06-17 오후 5:53:14
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising