Samsung | QB49R | User manual | Samsung QB49R User manual

Samsung QB49R User manual
Smart Signage User Manual (By Model)
This manual provides information about your Smart Signage including supported types and product specifications per model.
QBR (QB43R QB49R QB55R QB65R QB75R QB98R)
QER (QE82R)
QMR (QM43R QM49R QM55R QM65R QM75R)
The colour and the appearance may differ depending on the product, and the content in the
manual is subject to change without prior notice to improve the performance.
Recommended hours of use per day for the QBR models (except for QB98R) and QER models is
less than 16 hours.
If the product is used for longer than 16 hours a day, the warranty may be void.
© Samsung Electronics
Samsung Electronics owns the copyright for this manual. Use or reproduction of this manual in parts or entirety without the authorization of Samsung Electronics is prohibited. Trademarks other than Samsung Electronics are
property of their respective owners.
Table of contents
Preparations
Specifications
Checking the Components
3
General
14
Parts
Q*43R/Q*49R/Q*55R/Q*65R/Q*75R/QE82R
QB98R
Anti-theft Lock
4
4
5
6
Preset Timing Modes
16
Ports
7
Q*43R/Q*49R/Q*55R/Q*65R/Q*75R/QE82R 7
QB98R
8
Control menu
9
Precautions when handling the panel
10
Before Installing the Product (Installation
Guide)
Tilting Angle and Rotation
Ventilation
11
11
11
Installing the Wall Mount
Preparing before installing Wall-Mount
Installing the Wall Mount
Wall Mount Kit Specifications (VESA)
12
12
12
13
Appendix
Licence
17
2
Chapter 01
Preparations
Checking the Components
"" Contact the vendor where you
purchased the product if any
components are missing.
"" The appearance of the components
may differ from the images shown.
"" A stand is not provided with the
product. To install a stand, you can
purchase one separately.
Quick Setup Guide
Warranty card
(Not available in some locations)
Power cord
Batteries (AAA x 2)
(Not available in some locations)
"" The RS232C adapter can be used to
connect to another monitor using the
D-SUB (9-pin) type RS232C cable.
Remote Control
RS232C(IN) adapter
HOLDER-CABLE
Holder-Ring x 4
(Supported models: Q*65R,
Q*75R, QB98R, QE82R)
(Supported models: Q*43R,
Q*49R, Q*55R, Q*65R, Q*75R)
3
Parts
"" The colour and shape of parts may differ from what is shown. Specifications are subject to change without
notice to improve quality.
Q*43R/Q*49R/Q*55R/Q*65R/Q*75R/
QE82R
Parts
Remote sensor
Remote sensor
Power button
Description
Press a button on the remote control pointing at the sensor on the front of the product
to perform the corresponding function.
"" Using other display devices in the same space as the remote control of this product
can cause the other display devices to be inadvertently controlled.
Turns the product on or off.
Use the remote control within 2.5 m to 4 m from the sensor on the product at an angle of 30° from the left and
right.
"" Store used batteries out of reach of children and recycle.
"" Do not use a new and used battery together. Replace both batteries at the same time.
"" Remove batteries when the remote control is not to be used for an extended period of time.
Power indicator
"" To enhance the IR receiver performance, connect an external IR cable (sold separately) to the IR IN port.
Power button
Speaker
4
QB98R
"" The colour and shape of parts may differ from what is shown. Specifications are subject to change without
notice to improve quality.
Parts
ON/OFF
Spacer logo
Description
Do not pull on the spacer logo using force. The logo may tear or break off.
Press a button on the remote control pointing at the bottom of the product face to
perform the function. The remote control sensor is located on the bottom of the product.
"" Using other display devices in the same space as the remote control of this product
can cause the other display devices to be inadvertently controlled.
Speaker
Remote sensor
To use remote/eco sensor, make sure the sliding power button
is protruding from the bottom of the product.
Spacer logo
Power button
Remote sensor & Power button
To use the power button, make sure the sliding power button
is not protruding from the bottom of the product.
Use the remote control within 7 m to 10 m from the sensor on the product at an angle of 30° from the left and right.
"" Store used batteries out of reach of children and recycle.
"" Do not use a new and used battery together. Replace both batteries at the same time.
"" Remove batteries when the remote control is not to be used for an extended period of time.
"" To enhance the IR receiver performance, connect an external IR cable (sold separately) to the IR IN port.
5
Anti-theft Lock
"" An anti-theft lock allows you to use the product securely even in public places.
"" The locking device shape and locking method depend on the manufacturer. Refer to the user guide provided with your anti-theft locking device for details.
"" The following images are for reference only. Real-life situations may differ from what is shown in the images.
"" Supported model : QB98R
To lock an anti-theft locking device:
1 Fix the cable of your anti-theft locking device to a heavy object such as a desk.
2 Put one end of the cable through the loop on the other end.
3 Insert the locking device into the anti-theft lock slot at the back of the product.
4 Lock the locking device.
–– An anti-theft locking device can be purchased separately.
–– Refer to the user guide provided with your anti-theft locking device for details.
–– Anti-theft locking devices can be purchased at electronics retailers or online.
6
Ports
Port
Description
Connect to a USB memory device.
Q*43R/Q*49R/Q*55R/Q*65R/Q*75R/
QE82R
"" The colour and shape of parts may differ from what is shown.
Specifications are subject to change without notice to improve quality.
QB43R / QB49R /
QB55R / QB65R /
QB75R
QE82R
QM43R / QM49R /
QM55R / QM65R /
QM75R
USB 1 ¨(1.0A)
"" The USB ports on the product accept a maximum constant current of 1.0A.
If the maximum value is exceeded, USB ports may not work.
Connects to MDC using a LAN cable. (10/100 Mbps)
RJ45
"" Use Cat7(*STP Type) cable for the connection.
*Shielded Twist Pair.
RS232C IN
Connects to MDC using an RS232C adapter.
DVI/MAGICINFO IN
DVI IN: Connects to a source device using a DVI cable or HDMI-DVI cable.
MAGICINFO IN: Connects to a network box using DP-DVI cable to use Magicinfo.
DVI IN
HDMI IN 1 (ARC)
HDMI IN 2
Connects to a source device using a HDMI cable or HDMI-DVI cable.
HDMI IN 2 (DAISY CHAIN IN)
•• Connects to a source device using a HDMI cable or HDMI-DVI cable.
•• Connects to another product using a HDMI cable.
DP IN (DAISY CHAIN IN)
Connects to a PC using a DP cable.
HDMI OUT (DAISY CHAIN OUT)
Connects to another product using a HDMI cable.
Connect to a USB memory device.
USB 2(0.5A)
"" The USB ports on the product accept a maximum constant current of
0.5A. If the maximum value is exceeded, USB ports may not work.
DVI/HDMI AUDIO IN
Receives sound from a source device via an audio cable.
AUDIO OUT
Outputs sound to an audio device via an audio cable.
IR IN
Connects to an external IR cable that receives signals from the remote control.
RS232C OUT
Connects to MDC using an RS232C adapter.
7
QB98R
"" The colour and shape of parts may differ from what is shown.
Specifications are subject to change without notice to improve quality.
Port
Description
Connects to MDC using a LAN cable. (10/100 Mbps)
RJ45
"" Use Cat7(*STP Type) cable for the connection.
*Shielded Twist Pair.
Connect to a USB memory device.
USB 1 ¨(1.0A)
"" The USB ports on the product accept a maximum constant current of 1.0A.
If the maximum value is exceeded, USB ports may not work.
DVI/MAGICINFO IN
DVI IN: Connects to a source device using a DVI cable or HDMI-DVI cable.
MAGICINFO IN: Connects to a network box using DP-DVI cable to use Magicinfo.
RS232C IN
Connects to MDC using an RS232C adapter.
RS232C OUT
Connects to MDC using an RS232C adapter.
DVI/HDMI AUDIO IN
Receives sound from a source device via an audio cable.
HDMI IN 1 (ARC)
Connects to a source device using a HDMI cable or HDMI-DVI cable.
HDMI IN 2 (DAISY CHAIN IN)
•• Connects to a source device using a HDMI cable or HDMI-DVI cable.
•• Connects to another product using a HDMI cable.
DP IN (DAISY CHAIN IN)
Connects to a PC using a DP cable.
HDMI OUT (DAISY CHAIN OUT)
Connects to another product using a HDMI cable.
Connect to a USB memory device.
USB 2(0.5A)
"" The USB ports on the product accept a maximum constant current of
0.5A. If the maximum value is exceeded, USB ports may not work.
AUDIO OUT
Outputs sound to an audio device via an audio cable.
IR IN
Connects to an external IR cable that receives signals from the remote control.
8
Control menu
Items
Description
Power off the product.
"" The power button(«) is located on the bottom of the product.
Power Off
"" If you press the power button on the product when the product is
turned on, the control menu will be displayed.
•• With the control menu screen displayed, briefly press the power button to
move the cursor to Power Off , and then press and hold the power button to
turn off the product.
Select the connected input source.
Source
•• With the control menu screen displayed, briefly press the power button to
move the cursor to Source , and then press and hold the power button to
display the input source screen.
•• With the input source screen displayed, press and hold the power button to
switch to the desired input source.
Power Off
Press: Move
Source
"" The power button can only be used for Power Off and Source.
"" To exit from the control menu screen, wait for 3 seconds or more without pressing the power button.
Press & Hold: Select
9
Precautions when handling the panel
"" The colour and the appearance may differ depending on the model.
Do not stand the product as shown in the image. The panel is fragile
and can get damaged.
Lay the product down to handle it as shown in the image. (the
packaging can be used).
"" Supported models: 85 inches or more
Ensure you use the handles on the back when moving the product.
"" Supported models: 85 inches or more
Do not hold or grasp any area of the product within 15 mm from the
front.
15 mm
10
Before Installing the Product (Installation
Guide)
Ventilation
"" Contact Samsung Customer Service Centre for further details.
Installation on a Perpendicular Wall
To prevent injury, this apparatus must be securely attached to the floor/wall in accordance
with the installation instructions.
A Minimum 40 mm
•• Ensure that an authorised installation company installs the wall mount.
B Ambient temperature: Under 35 °C
•• Otherwise, it may fall and cause personal injury.
"" When installing the product on a perpendicular wall, allow at least
40 mm of space between the product and wall surface for ventilation
and ensure that the ambient temperature is kept below 35 °C.
•• Make sure to install the specified wall mount.
A
Tilting Angle and Rotation
"" Contact Samsung Customer Service Centre for further details.
•• The product can be tilted at a maximum angle of 15° from a perpendicular wall surface.
•• To use the product in Portrait mode, rotate clockwise until the power indicator (A or B) is
positioned as shown in the images below.
B
Installation on an Indented Wall
15°
A Minimum 40 mm
A
B Minimum 70 mm
B
B
C Minimum 50 mm
A
B
D Minimum 50 mm
B
"" Do not use this model installed on a ceiling, floor, or table.
E Ambient temperature: Under 35 °C
"" When installing the product on an indented
wall, allow at least the space specified above
between the product and wall for ventilation
and ensure that the ambient temperature is
kept below 35 °C.
D
A
D
C
E
C
11
Installing the Wall Mount
Preparing before installing Wall-Mount
To install a wall-mount from another manufacturer, use the Holder-Ring.
"" For the 82 inch model, does not use Holder-Ring(A).
A
Installing the Wall Mount
•• The wall mount kit (sold separately) allows you to mount the product on the wall.
•• The provided image is only for reference. For detailed information on installing the wall mount, see instructions
provided with the wall mount.
•• We recommend you contact a technician for assistance when installing the wall mount bracket.
•• Samsung Electronics is not responsible for any damage to the product or injury to yourself or others if you select
to install the wall mount on your own.
12
Wall Mount Kit Specifications (VESA)
•• Samsung wall mount kits contain a detailed installation manual and all parts necessary for assembly are
provided.
"" Install your wall mount on a solid wall perpendicular to the floor. To
install the product on the other wall area, contact the nearest agency.
If you install the product on a slanted wall, it may fall and result in
severe personal injury.
•• Do not use screws that are longer than the standard length or do not comply with the VESA standard screw
specifications. Screws that are too long may cause damage to the inside of the product.
•• For wall mounts that do not comply with the VESA standard screw specifications, the length of the screws may
differ depending on the wall mount specifications.
•• Do not fasten the screws too firmly. This may damage the product or cause the product to fall, leading to
personal injury. Samsung is not liable for these kinds of accidents.
•• Samsung is not liable for product damage or personal injury when a non-VESA or non-specified wall mount is
used or the consumer fails to follow the product installation instructions.
•• Do not mount the product at more than a 15 degree tilt.
•• Always have at least two people mount the product on a wall. (Four or more people for the 82-inch size and
larger models.)
•• Standard dimensions for wall mount kits are shown in the table below.
Model Name
VESA screw hole specs (A * B) in
millimetres
QB43R / QB49R / QB55R /
QM43R / QM49R / QM55R
200 × 200
QB65R / QB75R / QM65R /
QM75R
400 × 400
QB98R
900 × 600
QE82R
600 × 400
Standard Screw
Quantity
M8
4
"" Do not install your Wall Mount Kit while your product is turned on. It may result in personal injury due to electric
shock.
13
Chapter 02
Specifications
General
Model Name
Panel
Size
Display area
Model Name
Panel
Size
Display area
Model Name
Panel
Size
Display area
QB43R / QM43R
QB49R / QM49R
QB55R / QM55R
107.9 cm
123.2 cm
138.7 cm
941.184 mm (H) x 529.416 mm (V)
1073.78 mm (H) x 604.0 mm (V)
1209.6 mm (H) x 680.4 mm (V)
QB65R / QM65R
QB75R / QM75R
163.9 cm
189.3 cm
1428.48 mm (H) x 803.52 mm (V)
1650.24 mm (H) x 928.26 mm (V)
QB98R
QE82R
247.7 cm
207.1 cm
2158.848 mm (H) x 1214.352 mm (V)
1805.76 mm (H) x 1015.74 mm (V)
14
Model Name
QB43R / QB49R / QB55R / QB65R / QB75R / QE82R
Optimum resolution
Resolution
Maximum resolution
1920 x 1080 @ 60 Hz (DVI)
3840 x 2160 @ 60 Hz (HDMI)
QB98R / QM43R / QM49R / QM55R / QM65R / QM75R
1920 x 1080 @ 60 Hz (DVI)
3840 x 2160 @ 60 Hz (HDMI)
3840 x 2160 @ 60 Hz (DisplayPort)
AC100-240V~ 50/60Hz
Refer to the label at the back of the product as the standard voltage can vary in different countries.
Power Supply
Operating
Temperature: 0 °C – 40 °C (32 °F – 104 °F)
* For installing the enclosure, keep the internal temperature at 40 °C or below.
Humidity: 10% – 80%, non-condensing
Storage
Temperature: -20 °C – 45 °C (-4 °F – 113 °F)
Humidity: 5% – 95%, non-condensing
* Applicable before the product package is unpacked.
Environmental
considerations
"" Plug-and-Play
This monitor can be installed and used with any Plug-and-Play compatible systems. Two-way data exchange between the monitor and PC system optimises the monitor settings. Monitor
installation takes place automatically. However, you can customise the installation settings if desired.
"" Due to the nature of the manufacturing of this product, approximately 1 pixel per million (1ppm) may appear brighter or darker on the panel. This does not affect product performance.
"" This product can be set to only one resolution for each screen size to obtain the optimum picture quality due to the nature of the panel. Using a resolution other than the specified resolution
may degrade the picture quality. To avoid this, it is recommended that you select the optimum resolution specified for your product.
"" For detailed device specifications, visit the Samsung Electronics website.
15
Preset Timing Modes
The screen will automatically be adjusted if a signal that belongs to the following standard
signal modes is transmitted from your PC. If the signal transmitted from the PC does not
belong to the standard signal modes, the screen may be blank with the power indicator on. In
such a case, change the settings according to the following table by referring to the graphics
card user manual.
Resolution
Horizontal
Frequency
(kHz)
Vertical
Frequency
(Hz)
Pixel Clock
(MHz)
Sync Polarity
(H/V)
IBM, 720 x 400
31.469
70.087
28.322
-/+
Port
DP IN
DVI IN
HDMI IN
O
O
O
MAC, 640 x 480
35.000
66.667
30.240
-/-
O
O
O
MAC, 832 x 624
49.726
74.551
57.284
-/-
O
O
O
MAC, 1152 x 870
68.681
75.062
100.000
-/-
O
O
O
VESA CVT, 3840 x 2160RB
110.500
49.977
442.000
+/-
O
-
-
VESA CVT, 3840 x 2160RB
133.313
59.997
533.250
+/-
O
-
-
VESA DMT, 640 x 480
31.469
59.940
25.175
-/-
O
O
O
VESA DMT, 640 x 480
37.861
72.809
31.500
-/-
O
O
O
VESA DMT, 640 x 480
37.500
75.000
31.500
-/-
O
O
O
VESA DMT, 800 x 600
37.879
60.317
40.000
+/+
O
O
O
VESA DMT, 800 x 600
48.077
72.188
50.000
+/+
O
O
O
VESA DMT, 800 x 600
46.875
75.000
49.500
+/+
O
O
O
VESA DMT, 1024 x 768
48.363
60.004
65.000
-/-
O
O
O
VESA DMT, 1024 x 768
56.476
70.069
75.000
-/-
O
O
O
VESA DMT, 1024 x 768
60.023
75.029
78.750
+/+
O
O
O
VESA DMT, 1152 x 864
67.500
75.000
108.000
+/+
O
O
O
VESA DMT, 1280 x 720
45.000
60.000
74.250
+/+
O
O
O
VESA DMT, 1280 x 800
49.702
59.810
83.500
-/+
O
O
O
VESA DMT, 1280 x 1024
63.981
60.020
108.000
+/+
O
O
O
VESA DMT, 1280 x 1024
79.976
75.025
135.000
+/+
O
O
O
VESA DMT, 1366 x 768
47.712
59.790
85.500
+/+
O
O
O
Resolution
Horizontal
Frequency
(kHz)
Vertical
Frequency
(Hz)
Pixel Clock
(MHz)
Sync Polarity
(H/V)
VESA DMT, 1440 x 900
55.935
59.887
106.500
VESA DMT, 1600 x 900RB
60.000
60.000
VESA DMT, 1680 x 1050
65.290
Port
DP IN
DVI IN
HDMI IN
-/+
O
O
O
108.000
+/+
O
O
O
59.954
146.250
-/+
O
O
O
VESA DMT, 1920 x 1080
67.500
60.000
148.500
+/+
O
O
O
VESA DMT, 2560 x 1440RB
88.787
59.951
241.500
+/-
O
-
O
CTA-861, 720(1440) x 576i
15.625
50.000
27.000
-/-
-
O
O
CTA-861, 720(1440) x 480i
15.734
59.940
27.000
-/-
-
O
O
CTA-861, 720 x 576
31.250
50.000
27.000
-/-
O
O
O
CTA-861, 720 x 480
31.469
59.940
27.000
-/-
O
O
O
CTA-861, 1280 x 720
37.500
50.000
74.250
+/+
O
O
O
CTA-861, 1280 x 720
45.000
60.000
74.250
+/+
O
O
O
CTA-861, 1920 x 1080i
28.125
50.000
74.250
+/+
-
O
O
CTA-861, 1920 x 1080i
33.750
60.000
74.250
+/+
-
O
O
CTA-861, 1920 x 1080
27.000
24.000
74.250
+/+
-
O
O
CTA-861, 1920 x 1080
28.125
25.000
74.250
+/+
-
O
O
CTA-861, 1920 x 1080
33.750
30.000
74.250
+/+
-
O
O
CTA-861, 1920 x 1080
56.250
50.000
148.500
+/+
O
O
O
CTA-861, 1920 x 1080
67.500
60.000
148.500
+/+
O
O
O
CTA-861, 3840 x 2160
54.000
24.000
297.000
+/+
-
-
O
CTA-861, 3840 x 2160
56.250
25.000
297.000
+/+
-
-
O
CTA-861, 3840 x 2160
67.500
30.000
297.000
+/+
O
-
O
CTA-861, 3840 x 2160
112.500
50.000
594.000
+/+
O
-
O
CTA-861, 3840 x 2160
135.000
60.000
594.000
+/+
O
-
O
CTA-861, 4096 x 2160
54.000
24.000
297.000
+/+
-
-
O
CTA-861, 4096 x 2160
67.500
30.000
297.000
+/+
-
-
O
CTA-861, 4096 x 2160
112.500
50.000
594.000
+/+
-
-
O
CTA-861, 4096 x 2160
135.000
60.000
594.000
+/+
-
-
O
16
Chapter 03
Appendix
Licence
Manufactured under license from Dolby Laboratories.
Dolby, Dolby Audio, Pro Logic, and the double-D symbol are
trademarks of Dolby Laboratories.
The terms HDMI and HDMI High-Definition Multimedia Interface, and
the HDMI Logo are trademarks or registered trademarks of HDMI
Licensing LLC in the United States and other countries.
Open Source Licence Notice
In the case of using open source software, Open Source Licences are available on the
product menu. Open Source Licence Notice is written only English.
For information on the Open Source Licence Notice, contact the Samsung Customer Centre
or send email to oss.request@samsung.com.
THIS PRODUCT IS SOLD WITH A LIMITED LICENCE AND IS AUTHORISED TO BE USED
ONLY IN CONNECTION WITH HEVC CONTENT THAT MEETS EACH OF THE THREE
FOLLOWING QUALIFICATIONS: (1) HEVC CONTENT ONLY FOR PERSONAL USE; (2) HEVC
CONTENT THAT IS NOT OFFERED FOR SALE; AND (3) HEVC CONTENT THAT IS CREATED
BY THE OWNER OF THE PRODUCT.
THIS PRODUCT MAY NOT BE USED IN CONNECTION WITH HEVC ENCODED CONTENT
CREATED BY A THIRD PARTY, WHICH THE USER HAS ORDERED OR PURCHASED FROM
A THIRD PARTY, UNLESS THE USER IS SEPARATELY GRANTED RIGHTS TO USE THE
PRODUCT WITH SUCH CONTENT BY A LICENSED SELLER OF THE CONTENT.
YOUR USE OF THIS PRODUCT IN CONNECTION WITH HEVC ENCODED CONTENT IS
DEEMED ACCEPTANCE OF THE LIMITED AUTHORITY TO USE AS NOTED ABOVE.
17
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising