Samsung | PM32F | Quick Start Guide | Samsung PM32F Quick start guide

Samsung PM32F Quick start guide
DVI / PC /
MAGICINFO IN
4
HDMI2
AUDIO
OUT
3
HDMI1
AUDIO
IN
RS232C
OUT
RS232C
IN
USB1
(1.0A)
USB2
(0.5A)
Reverse Side
Quick Setup Guide
1
2
5
6
PM32F PM43F PM49F PM55F
PH43F PH49F PH55F
DP IN
7
* The colour and the appearance may differ depending on the product, and the specifications are subject
to change without prior notice to improve the performance.
1
2
3
* Recommended hours of use per day for the PM32F model is less than 16 hours.
If the product is used for longer than 16 hours a day, the warranty may be void.
4
5
Connect to a USB memory device.
Connects to MDC using an RS232C adapter.
Receives sound from a source device via an audio cable.
Connects to the audio of a source device.
Connects to a source device using an HDMI cable.
7
* Download the user manual from the website for further details.
http://www.samsung.com/displaysolutions
8
9
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are
trademarks or registered trademarks of HDMI Licensing LLC in the United States and other
countries.
Issues
-
-
+
+
Remote Control
RS232C(IN) adapter
Power cord
Screw ((M3 x L8) x 1)
Batteries (Not available in some locations)
USB cover
The screen keeps switching
on and off.
No Signal is displayed on the
screen.
Not Optimum Mode is
displayed.
The images on the screen
look distorted.
9
DVI IN: Connects to a source device using a DVI cable or HDMI-DVI cable.
PC IN: Use the (dedicated) D-SUB - DVI cable (or D-SUB cable with D-SUB to DVI
adapter) when connecting a PC.
MAGICINFO IN: Use the (dedicated) DP-DVI cable when connecting a network box
(sold separately).
Connects to a source device using a DP cable.
Connects to another product using a daisy chain (DP port) cable.
Connects to MDC using a LAN cable.
Solutions
Issues
The screen is not clear.
The screen is blurry.
The screen appears unstable
and shaky.
There are shadows or ghost
images left on the screen.
Solutions
Check the cable connection between the product
and PC, and ensure the connection is secure.
The screen is too bright.
The screen is too dark.
Adjust Brightness and Contrast.
Check that the product is connected correctly with
a cable.
Screen color is inconsistent.
Go to Picture and adjust the Color Space settings.
White does not really look
white.
Go to Picture and adjust the White Balance settings.
Check that the device connected to the product is
powered on.
This message is displayed when a signal from the
graphics card exceeds the product’s maximum
resolution and frequency.
Refer to the Standard Signal Mode Table and set
the maximum resolution and frequency according
to the product specifications.
There is no sound.
Adjust the volume.
The volume is too low.
Check the cable connection to the product.
Remove any accessories (video extension cable,
etc) and try again.
Set the resolution and frequency to the
recommended level.
Check that the resolution and frequency of the
PC and graphics card are set within a range
compatible with the product. Then, change the
screen settings if required by referring to the
Additional Information on the product menu and
the Standard Signal Mode Table.
Check the connection of the audio cable or adjust
the volume.
Check the volume.
If the volume is still low after turning it up to the
maximum level, adjust the volume on your PC
sound card or software program.
Make sure that the batteries are correctly in place
(+/-).
Adjust Coarse and Fine.
BN68-08079J-01_QSG_PMF_32-55_INDIA_ENG.indd 1
8
Troubleshooting Guide
Contact the vendor where you purchased the product if any components are missing.
Warranty card (Not available in some
locations)
RJ45
BN68-08079J-01
Checking the Components
Quick Setup Guide
6
DAISY CHAIN
The remote control does not
work.
Check if the batteries are flat.
Check for power failure.
Make sure that the power cord is connected.
Check for any special lighting or neon signs
switched on in the vicinity.
2019-07-08
2:22:34
Connecting and Using a Source Device
Connecting to a PC
Specifications
Connecting the LAN Cable
Model Name
RJ45
Use Cat7(*STP Type) cable for the connection.
* Shielded Twist Pair
AUDIO IN
RS232C OUT
RS232C IN
PM49F / PH49F
PM55F / PH55F
107.9 cm
123.2 cm
138.7 cm
Display area
698.4 mm (H) x 392.85 mm (V)
940.89 mm (H) x
529.25 mm (V)
1073.78 mm (H) x
604.00 mm (V)
1209.6 mm (H) x 680.4 mm (V)
Audio Output
10 W + 10 W
10 W + 10 W
10 W + 10 W
10 W + 10 W
Power Supply
AC100-240V~ 50/60Hz
Refer to the label at the back of the product as the standard voltage can vary in different countries.
Environmental
considerations
RS232C IN
PM43F / PH43F
80.1 cm
Connecting to MDC
DVI / PC / MAGICINFO IN
PM32F
Size
Panel
DVI / PC / MAGICINFO IN
AUDIO IN
Ⓡ
Operating
Temperature: 0 ˚C - 40 ˚C (32 ˚F - 104 ˚F), With PIM: 10 ˚C - 40 ˚C (50 ˚F - 104 ˚F)
Humidity: 10% - 80%, non-condensing
Storage
Temperature: -20 ˚C - 45 ˚C (-4 ˚F - 113 ˚F)
Humidity: 5% - 95%, non-condensing
* This is a class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures.
* For detailed device specifications, visit the Samsung Electronics website.
* The PVC Free (except for accessory cables) logo is the self-declared trademark of Samsung.
‒ Accessory cables: signal cables and power cords
RS232C OUT
HDMI1, HDMI2
RS232C IN
RS232C OUT
AUDIO IN
RJ45
Warning! Important Safety Instructions
(Please read the appropriate section that corresponds to the marking on your Samsung product before attempting to install the product.)
CAUTION
HUB
RISK OF ELECTRIC SHOCK DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR
BACK). THERE ARE NO USER SERVICEABLE PARTS INSIDE. REFER ALL SERVICING TO
QUALIFIED PERSONNEL.
HDMI1, HDMI2
• If your equipment uses an AC adapter:
‒ Only use the AC adapter with your product by Samsung.
‒ Do not use the power cord with other products.
• Do not install this equipment in a confined space such as a case or similar.
• The slots and openings in the cabinet and in the back or bottom are provided for necessary
DP IN
ventilation. The slots and openings must never be blocked or covered.
• The product should be located away from heat sources such as radiators, heat registers, or
RJ45
Connecting an External Monitor
DAISY CHAIN
other products that produce heat.
RS232C OUT
RS232C IN
RS232C OUT
This symbol indicates that high voltage is present inside. It is dangerous to
make any kind of contact with any internal part of this product.
This symbol indicates that this product has included important literature
concerning operation and maintenance.
• Do not place a water containing vessel (vases etc.) on this apparatus, as this can result in a risk
of fire or electric shock. (Apparatus shall not be exposed to dripping or splashing)
• The apparatus must be connected to an earthed MAINS socket-outlet (Class l Equipment only).
Or Use only a properly grounded plug and receptacle (Class l Equipment only).
• To disconnect the apparatus from the mains, the plug must be pulled out from the mains
socket, therefore the mains plug shall be readily operable.
• As long as this unit is connected to the AC wall outlet, it is not disconnected from the AC power
source even if you turn off this unit by POWER.
This product is RoHS compliant.
This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset, USB cable) should not be disposed of with other household
waste at the end of their working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate these items from other types of waste and
recycle them responsibly to promote the sustainable reuse of material resources.
For more information on safe disposal and recycling visit our website www.samsung.com/in or contact our Helpline numbers -1800 40 SAMSUNG (1800 40 7267864) (Toll-Free)
RS232C IN
Connecting to a Video Device
HDMI1, HDMI2
RS232C OUT
• For details on how to use the MDC programme, refer to Help after installing
the programme.
• The MDC programme is available on the website.
Contact SAMSUNG WORLD WIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre.
Tel. 1800 40 SAMSUNG (1800 40 7267864) (Toll-Free)
www.samsung.com/in/support
AUDIO IN
HDMI1, HDMI2
Connecting to an Audio System
AUDIO OUT
BN68-08079J-01_QSG_PMF_32-55_INDIA_ENG.indd 2
2019-07-08
2:22:37
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising