Whirlpool | AWOE 9745 WP | Instruction for Use | Whirlpool AWOE 9745 WP Instruction for Use

Whirlpool AWOE 9745     WP Instruction for Use
30106289GB.fm Page 1 Monday, May 18, 2009 7:32 PM
GB
PROGRAMME CHART
A. Programme selector
I. Programme sequence indication
B
}
B. Display
C. “Temperature” button
D. “Variable spin” button
A
H. “Favourites” button
Programme
Temperature
Care
Labels
Max.
Load
F
Type of wash/Notes
kg - Respect the manufacturer’s recommendations on the care label
White Cotton /
Antibacterial
70 - 95 °C
Cotton
Coloured
20 - 60 °C
Synthetics
20 - 60 °C
Delicates
Add garment
J
K
G
C
E. “Start delay” button
F. “Start (Pause)” button
G. “Reset/Drain” button
❉
:
1)
L
I
Programme
in process
Programme
finished
J. “Child lock” indication
D
E
K. “Detergent overdosage” indication
H
L. Red failure indications
Spin
Detergents and additives
Selectable options
Start
Pre- Main Softener Pre- Clean +
Easy
Intensive delay Variable Max
wash wash
wash
ironing
rinse
spin
Spin
Speed
rpm
8.0 Normally to heavily soiled bed linen, table linen and underwear, towels, shirts etc. made
of cotton and linen.
At a temperature of 80°C or more, this programme eliminates bacteria, ensuring
8.0 sanitization of your laundry. The bacteria removal efficiency has been tested following a
similar methodology to the NF EN 13697 standard of Nov. 2001.
❉
Yes
❉
❉
❉
❉
❉
❉
❉
max.
soiled blouses, shirts, overalls etc. made of polyester (Diolen, Trevira),
3.5 Normally
polyamide (Perlon, Nylon) or blends with cotton.
❉
Yes
❉
❉
❉
❉
❉
❉
❉
max.
20 - 40 °C
2.5 Curtains and delicate clothing, dresses, skirts, shirts and blouses.
❉
Yes
❉
❉
—
—
—
❉
❉
1000 1)
Wool
20 - 40 °C
2.0 This programme (40°C) is tested and approved by The Woolmark Company for machine
—
Yes
❉
—
—
—
—
❉
❉
1000 1)
Handwash /
Lingerie
20 - 40 °C
—
Yes
❉
—
—
—
—
❉
❉
400 1)
Jeans
20 - 60 °C
washable wool.
Textiles made of silk, linen, wool and viscose marked as “handwashable”.
Up to a temperature of 30°C, this cycle is particularly suitable to treat delicate lingerie (use
2.0 of a laundry net strongly recommended).
This programme (40°C) is tested and approved by The Woolmark Company for
handwashable wool.
soiled cotton jeanswear and garments made of robust jeanslike material such as
7.0 Normally
trousers and jackets.
❉
Yes
❉
❉
❉
—
—
❉
❉
max.
Big Items
20 - 60 °C
made of synthetic fibres; bed covers filled with feathers, polyester or other
3.0 Blankets
artificial fibers; sleeping bags, bathmats and similar items.
❉
Yes
❉
❉
—
—
❉
❉
❉
1000 1)
Sport
20 - 30 °C
3.5 This programme includes a prewash cycle – you can add detergent also to the prewash
❉
Yes
—
—
—
❉
❉
❉
❉
max.
SuperEco
20 - 60 °C
—
Yes
❉
—
—
—
❉
❉
❉
max.
Daily load
20 - 60 °C
6.0 Slightly to normally soiled textiles made of cotton and/or synthetics.
—
Yes
❉
—
—
❉
❉
❉
❉
max.
Speed 15
20 - 30 °C
briefly worn outer clothing made of cotton, artificial fibers and blends with
3.0 Refreshes
cotton.
—
Yes
❉
—
—
—
—
❉
❉
max.
Rinse & Spin
—
—
8.0 Same as the last rinse and the final spin in the “Cotton” programme.
—
—
❉
—
—
—
❉
❉
❉
max.
Spin
—
—
8.0 In this programme spinning is intensive. Same as the spin cycle in the “Cotton” programme.
—
—
—
—
—
—
—
❉
❉
max.
Only woollens, labelled with the Woolmark and identified as machine washable.
Normally soiled and sweaty sportswear made of cotton jersey or microfibers.
chamber. Do not add any softener.
Slightly to normally soiled bed linen, table linen and underwear, towels, shirts etc. made of
cotton and linen.
highest economy in energy consumption by prolonged washing duration. Ideal to be run
8.0 Offers
overnight to additionally profit from the more favourable energy rates. To avoid noise of
spinning at night, set spin speed to “0” and start spin programme in the morning, or define
programme start with “Start delay” accordingly.
optional / Yes : dosing required
For improved garment care, spin speed is restricted in these programmes.
Black process 45.0° 150.0 LPI
The wool and handwash cycles of this machine have been tested and approved by The Woolmark Company for the washing of
Woolmark garments labelled as “machine wash” or “hand wash” provided that the garments are washed according to the
instructions on the garment label and those issued in this programme chart. M0702
Whirlpool is a registered trademark of Whirlpool USA
5019 301 06289
30106289GB.fm Page 2 Monday, May 18, 2009 7:32 PM
CONSUMPTION DATA
Programme
White Cotton / Antibacterial
Cotton Coloured***
Cotton Coloured
Synthetics
Synthetics
Delicates
Wool
Handwash / Lingerie
Jeans
Big Items
Sport
SuperEco
Daily load
Speed 15
Temperature
(°C)
95
60
40
60
40
30
40
40
40
40
30
60
40
30
Load
(kg)
8.0
8.0
8.0
3.5
3.5
2.5
2.0
2.0
7.0
3.0
3.5
8.0
6.0
3.0
Water
(l)
82**
59
77
46**
42
60
60
45
95
74
54
75
73
30
Energy
(kWh)
2.40
1.36
0.75
0.85
0.50
0.40
0.60
0.60
0.80
0.75
0.55
0.95
0.60
0.20
Approx. Programme Duration
(hours : minutes)*
2:20
2:20
2:05
1:35
1:20
0:45
0:45
0:40
2:22
1:30
1:34
4:00
1:00
0:15
Consumption values were measured in normalized conditions in compliance with Standard IEC/EN 60 456. Consumption data in the home
may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash.
The time indicated on the display can deviate from the values in the table, because it takes into account the operation conditions
*
applicable at that time.
To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out.
**
*** Reference Programme for Energy Label.
“Easy ironing” button
ADD DETERGENTS, CLOSE THE DOOR
• Makes ironing easier by an increased water quantity and a very
AND SELECT THE PROGRAMME
gentle spin.
Add detergent as indicated on the front page and as described in
“Intensive rinse” button
the chapter “Detergent and Additives” in your Instructions for Use.
• More water is added and rinse cycle is prolonged.
Turn the programme selector to the desired programme; the light
• This option is particularly suitable for areas with very soft water or
of the “Start (Pause)” button
blinks. The temperature and
for washing baby linen, and helps people with allergies.
spin speed indicated on the display can be altered by pressing the
“Variable spin” button
“Temperature” button
or the “Variable spin” button
.
• Every programme has a predefined spin speed.
• Press the button to set another spin speed.
SELECT ANY DESIRED OPTION
• If spin speed “0” is selected, the final spinning is cancelled but
intermediate spin peaks remain during rinse. The water is
When the combination of programme and additional option(s) is
drained out only.
not possible, the indication lights switch off automatically.
• If you select “Rinse hold”
, the laundry remains in the last
Unsuitable combinations of options are deselected automatically.
rinse water without progressing to the final spin cycle, to avoid
“Prewash” button
creasing and prevent colours from changing. To activate the
• Only for heavily soiled loads (for example sand, granular dirt)
“Rinse hold”, press the “Variable spin” button repeatedly until the
sensible. Increases the cycle time by approximately 15 min.
“Rinse hold” symbol
on the display lights up.
• Do not use liquid detergent for the main wash when activating
- The wash programme stops to “Rinse hold” when the
the “Prewash” option.
“Rinse hold” symbol
on the display blinks; the light of
“Clean+” button
“Start (Pause)” button blinks as well.
• Choose this option if you use an in-wash additive for stain removal
- To terminate the “Rinse hold” by draining the water,
without any spinning, press the “Start (Pause)” button.
(powder, for example “Vanish”) - it will optimize the additive’s
- To terminate the “Rinse hold” by spinning the laundry, press
efficiency to get better wash performance and stain removal.
the “Variable spin” button to select the desired spin speed
• Choose temperature of 30 or 40°C and use with maximum load.
and then “Start (Pause)” to start the spin cycle.
• Add an appropriate amount of in-wash additive for stain
- Do not leave the laundry to soak for too long in the “Rinse hold”.
removal (powder) to the main wash chamber, together with
your detergent (only use powder detergent with this option).
Respect the manufacturer’s dosing instructions.
• Prolongs the programme by approx. 10 to 15 minutes.
• Appropriate for use of stain removers and bleaches on oxygen
basis. Chlorine or perborate bleaches must not be used!
option(s), push and hold the “Favourites” button
for at
least 3 seconds. The lamp next to “Favourites”
shortly
blinks and then lights up - the programme setting is saved.
Next time you want to use your individual programme setting,
select the programme, push the “Favourites” button
and
start by pushing “Start (Pause)”
.
If you want to replace the saved programme setting by another
one, proceed as already described above.
START DELAY
The “Start delay”
allows to run the machine at the consumer’s
convenience, for example at night when electricity is cheaper. Do
not use liquid detergent when activating the “Start delay”.
• Select programme, temperature, spin speed and options.
• Press the Start delay button to select one of the delay time
steps between 0:30 and 23:00 hours.
• Press the “Start (Pause)” button
.
The countdown of the delay time begins; the clock symbol next to
the delay time and the colon between hours and minutes blink.
• The time delay indication disappears when the programme
starts and it is replaced by the remaining programme time.
To cancel the “Start delay”
..before you press the “Start (Pause)” button:
• Press the “Reset / Drain” button
, or set the start delay
time to “0:00” - the delay time disappears after a few seconds.
..after having pressed the “Start (Pause)” button:
Press the “Reset/Drain” button
for at least 3 seconds; the
start delay time disappears from the display. Or press “Start
(Pause)” twice to start the selected programme immediately.
“ADD GARMENT” INDICATION
Before starting a programme, the symbol lights to show that the
door can be opened to add more washing. As soon as you press
“Start (Pause)”, the door will lock until the end of the
programme and must on no account be forced open. In case you
have to open it urgently during a running programme, refer to
“Reset a running programme before the end”.
If you try to start a wash programme and the door is not properly
closed, the “Add garment” indication will blink.
• Turn the programme selector to a programme position, or run
a programme as usual.
• Press the “Temperature”
symbol
SAVE YOUR FAVOURITE PROGRAMMES
CHILD LOCK
If there is a programme setting which you use frequently, the
appliance offers the possibility to save one setting for each
programme so that it can be used again by just pushing one button.
• Select the desired programme, temperature, spin speed and
Activating the child lock prevents children from starting a wash
cycle or changing the settings of a running programme. The child
lock cannot be activated or deactivated when the programme
selector is in the “Off/O” position. To activate the child lock:
will shortly blink and then light up to indicate
that the child lock is active.
The programme setting cannot be changed anymore; the only change
possible is to switch the washer off by turning the programme selector
to the “Off/O” position. To deactivate the child lock, proceed in the
same way as for activating it.
RED FAILURE INDICATIONS
If one of the red failure indications on the display lights up, refer to
the “Troubleshooting Guide” in your “Instructions for Use”.
PROGRAMME END
•
The display shows “End”, and the “Programme finished”
1.
indication
lights up.
Turn the programme selector to the “Off/O” position.
2.
Close the water tap.
3.
Open the door and unload the machine.
• Leave the door ajar to allow the drum to dry.
• If you do not turn the programme selector to the “Off / O”
position, all lights of the control panel go out after a few
minutes to save energy - only “End” will remain on the display.
DETERGENT OVERDOSAGE INDICATION
The symbol will blink at the end of the programme if you used too
much detergent. Use less detergent next time.
CHANGE PROGRAMME AND/OR OPTIONS
AFTER PROGRAMME START
1.
Press the “Start (Pause)” button
to pause the
programme. The light blinks.
2.
Select the new programme, temperature, any options and
another spin speed if you want.
3.
PROGRAMME START
Open the tap and press the “Start (Pause)” button
; the
blinking “Start (Pause)” button light becomes constant. The
“Add garment” indication goes out, and the lit bubbles indicate that
the programme is in process. In some phases, the remaining
programme time is newly calculated - if this is the case, the “6th
sense” indication
on the display will fade, and the remaining
programme time is replaced by an animation.
and the “Variable spin”
button simultaneously for at least 3 seconds. The “Child lock”
Press the “Start (Pause)” button
again. The new
programme continues at the same position where the
previous programme was interrupted. Do not add detergent
for this programme.
RESET A RUNNING PROGRAMME BEFORE
THE END
The “Reset/Drain” button
•
cancels a programme before the end.
Press the “Reset/Drain” button
for at least 3 seconds; an
animation appears on the display. Any existing water is drained
out before the door can be opened.
Whirlpool is a registered trademark of Whirlpool USA
5019 301 06289
Black process 45.0° 150.0 LPI
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising