Russell Hobbs | product_210 | User manual | Russell Hobbs product_210 Product User Manual

Russell Hobbs product_210 Product User Manual
instructions
Read the instructions and keep them safe. Pass them on if you
pass the carving knife on. Remove all packaging, but keep it
till you know the knife works.
important safeguards
Follow basic safety precautions, including:
1 This knife must only be used by a responsible adult. Use
and store the knife out of reach of children.
2 Don’t put the handle, cable, or plug in water or any
other liquid. Don’t use the knife in the bathroom,
near water, or outdoors.
3 Don’t use the knife in the presence of children. Their
movements are unpredictable. They may jog your arm or
bump into you accidentally.
4 The safety lock will prevent accidental operation. Don’t try
to jam it in place.
5 Don’t try to cut bone. The blades may slip and cause
serious injury. You may also damage the blades.
6 The blades are extremely sharp, don’t leave
them lying around where they may be touched
accidentally by you or anyone else.
2
7 After use, clean the blades, replace them in their protective
sleeve, and store them out of reach of children.
8 Unplug the knife before attaching or removing blades and
before cleaning.
9 Don’t use the other hand to steady the food being cut. Use
a carving fork.
10 Don’t apply pressure to the knife and don’t use a sawing
action. Simply guide the knife through the food, letting the
motor do all the work.
11 Finished? – first unplug the knife, then remove the blades.
12 Don’t leave the knife unattended while it’s plugged in, or
while the blades are attached.
13 Route the cable so it doesn’t overhang, and can’t be
tripped over or caught.
14 Use a cutting board to avoid damage to the blades and to
the work surface.
17 Keep the knife and the cable away from hotplates, hobs or
burners.
18 Don’t run the motor for more than 7 minutes, or it may
overheat. After 7 minutes, switch off for at least 5 minutes,
to let the motor cool.
19 Don’t fit accessories unless we supply them.
20 Don’t use the knife for any purpose other than those
described in these instructions.
21 Don’t use the knife if it’s damaged or malfunctions.
22 If the cable is damaged, return the knife, to avoid hazard.
household use only
3
preparation
1 Clear a space on the work surface so the cable can’t catch
anything, and the knife can’t hit anything while in use.
2 Route the cable so it doesn’t overhang, and can’t be
tripped over or caught.
3 Put the cutting board on the work surface and have the
carving fork within easy reach.
4 Remove all packaging from the food. Don’t use the knife to
cut the packaging, you may damage the blades.
5 Put the food on the cutting board.
6 Keep the protective sleeve on the blades.
7 Hold the blades by the finger grips.
8 Insert the free ends of the blades into the slot on the front
of the handle and push gently until they click into place.
9 Lay the knife down on or near the cutting board.
10 Remove the protective sleeve from the blades.
11 Put the plug into the power socket.
12 Steady the food with the carving fork.
13 Hold the knife by the handle, with your forefinger on the
safety lock/switch.
14 The safety lock is there to prevent accidental operation.
Don’t try to jam it in place.
15 The switch is spring-loaded, the knife will operate only
while it is pressed in.
4
cutting
16 Squeeze the safety lock to unlock the switch.
17 Slide the switch towards the handle, to start the blades.
18 Cut away from your body.
19 Use a carving fork to steady the food being cut – don’t use
your other hand.
20 Don’t try to reposition the food while you’re holding the
knife.
21 If you have to reposition the food, release the switch, set
the knife down, move the food, steady it with the carving
fork – then pick up the knife and start again.
22 When you finish, or if you need to stop cutting to do
anything else, release the switch, set the knife down, and
unplug it.
23 Don’t run the motor for more than 7 minutes, or it may
overheat. After 7 minutes, switch off for at least 5 minutes,
to let the motor cool.
5
removing the blades
24 Release the switch, set the knife down, and unplug it.
25 Hold the handle of the knife, and press the blade release
button 5.
26 Keep your fingers away from the edges of the blades.
27 Hold the blades by the finger grips and gently pull them
out of the slot.
cleaning the blades
28 One of the blades has a “keyhole”
slot, the other is fitted with a rivet.
To separate the blades, slide the
rivet along the slot to the large hole.
29 Wash the blades in hot soapy water, rinse, dry thoroughly,
then rejoin them and replace them in their protective
sleeve.
30 The blades are very sharp, don’t leave them where they
may be touched accidentally by you or anyone else.
31 The blades are dishwasher safe.
cleaning the handle
32 Wipe the handle with a soft cloth dampened with a small
amount of proprietary disinfectant.
33 Don’t put the handle in liquid.
34 Don’t use harsh or abrasive cleaning agents or solvents.
cutting meat
35 Cut across the grain. Although cutting along the grain will
give bigger slices, they’ll tend to be tough and stringy.
6
leg of lamb/pork/ham
36 Lay the leg on its side and steady it with
the carving fork.
37 Make one cut right down to the bone.
38 Slice alternately on either side of this cut,
tilting the knife gradually to increase the
size of the slices.
39 Turn the leg over and do the same to the other side.
sirloin
40 Cut along the bone from the
backbone down the rib.
41 Carve thin slices vertically down
towards the bone.
42 Turn the joint over and do the same
to the other side.
chicken
43 Pull off the leg, wing and thigh.
44 Holding the knife at an angle, slice
downwards from the breastbone.
45 Turn the chicken and do the same to
the other side.
connection
This product doesn’t need an earth. It has a 13A BS1362 fuse
in a 13A BS1363 plug. To replace the plug, fit the
blue wire to N, and the brown wire to L. Fit the
cord grip. If in doubt, call an electrician.
Don’t use a non-rewireable/moulded plug
unless the fuse cover is in place. If you remove
the plug, dispose of it.
7
service
If you ring Customer Service, please have the Model No. to
hand, as we won’t be able to help you without it. It’s on the
rating plate (usually underneath the product).
The product isn’t user-serviceable. If it’s not working, read
the instructions, check the plug fuse and main fuse/circuit
breaker. If it’s still not working, consult your retailer. If that
doesn’t solve the problem:
Pack carefully, with a note of your name, address, day phone
number, and what’s wrong. If under guarantee, say where and
when purchased, and include proof of purchase (till receipt).
Send it to Customer Returns (address below right).
Customer Service
Customer Returns
(correspondence only)
Salton Europe Ltd
Salton Europe Ltd
Heath Mill Road
Failsworth
Wombourne
Manchester
Wolverhampton
M35 0HS
WV5 8AQ
Customer Service (service@saltoneurope.com)
telephone 0845 658 9700 (local rate number)
guarantee
Defects affecting product functionality appearing within one
year of purchase will be corrected by replacement or repair
provided the product is used and maintained in accordance
with the instructions. Your statutory rights are not affected.
Documentation, packaging, and product specifications may
change without notice.
www.russellhobbs.co.uk for more products.
8
439-809
online
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising