Nikon | Wireless Mobile Utility | Nikon Wireless Mobile Utility Käyttöohje(iOS)

Nikon Wireless Mobile Utility Käyttöohje(iOS)
En
Wireless Mobile Utility (iOS)
User’s Manual
Install the Wireless Mobile Utility on your iOS device (iPhone,
iPad, or iPod touch) to download pictures from a camera or take
pictures remotely.
The Wireless Mobile Utility supports the following cameras. See
the section for your camera for more information on using the
Wireless Mobile Utility.
A
D750, D610, D600, D7200, D7100, D5500,
D5300, D5200, D3300, Df
0
B
D3200, COOLPIX A
0 28–52
C
Nikon 1 Cameras
0 53–75
D
Other COOLPIX Cameras *
076–103
2–27
* Available only with models that feature built-in Wi-Fi or support the optional wireless mobile adapter. For information on
supported COOLPIX cameras with built-in Wi-Fi, visit:
https://itunes.apple.com/app/wireless-mobile-utility/
id554157010
1
A
D750, D610, D600, D7200, D7100, D5500,
D5300, D5200, D3300, Df
This section describes the options available when the Wireless
Mobile Utility is used to connect to D750, D610, D600, D7200,
D7100, D5500, D5300, D5200, D3300, and Df cameras.
Features
Use the Wireless Mobile Utility to:
Take pictures remotely (0 10): Tap the shutter icon in the Wireless Mobile Utility to
take pictures and download them to
the iOS device.
Download pictures as they are taken (0 13):
Take pictures with the camera and save
them to the iOS device.
View pictures (0 15): View the pictures stored on the iOS device or
the camera memory card.
Download pictures (0 18): Download existing pictures from the camera memory card.
Share pictures (0 23): Share pictures via e-mail or upload pictures to
photo-sharing sites.
For information on establishing a connection, see page 4.
A
2
Notices
• No part of this manual may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form without Nikon’s prior written permission.
• Nikon reserves the right to change the specifications of the hardware and software described in this manual at any time and
without prior notice. Nikon will not be held liable for damages
that may result from any mistakes that this manual may contain.
D Using This Application for the First Time
Read the terms of use (0 27) before connecting.
D Wi-Fi Security
Password protection and other Wi-Fi security features are not automatically enabled. Be sure to enable Wi-Fi security on the iOS
device after connecting for the first time.
D The Wireless Mobile Adapter
While the adapter is inserted, the camera exposure meters will not
turn off; monitor the camera battery level to ensure that the camera does not power off unexpectedly. In addition, some camera
menu items may be grayed out and unavailable and the camera
can not be used for playback or live view. Movie recording can
not be used.
A
3
Installing the App
1
Locate the app on the App Store.
Connect to the App Store on the iOS device and search for
“Wireless Mobile Utility”.
2
Install the app.
Install the Wireless Mobile Utility.
Establishing a Wireless Connection
The following applies only to cameras without built-in Wi-Fi. For
information on cameras with built-in Wi-Fi, see the manual provided with the camera.
1
Connect the wireless mobile adapter.
Attach the wireless mobile adapter to the camera and turn
the camera on. See the manual supplied with the wireless
mobile adapter for details.
2
Enable Wi-Fi on the iOS device.
If Wi-Fi is off, turn it on.
3
Select the appropriate SSID.
The default SSID begins with “Nikon”. iOS-compliant devices
can not be connected using WPS.
4
Launch the Wireless Mobile Utility.
After selecting On for Privacy > Photos > WMU, launch the
Wireless Mobile Utility. When a connection is established,
the LED on the wireless mobile adapter will glow green and
the main dialog for the Wireless Mobile Utility will be displayed on the iOS device. For information on enabling wireless security, see page 6. For information on taking pictures,
see page 10. For information on viewing pictures, see page 15.
A
4
A Connection Status
Connection status is shown by an icon in the
home display:
: Connection established.
•
•
: No connection. Tap the icon to open the
iOS device settings menu and check Wi-Fi
settings.
A
5
Wi-Fi Security
Wi-Fi security will not be enabled the first time you connect.
Security can be enabled by opening the Wireless Mobile Utility
settings menu (0 25) and following the steps below.
1
Tap WMA settings.
2
Tap Authentication.
A
6
23
Select WPA2-PSK-AES.
Tap WPA2-PSK-AES.
Tap WMA settings to return to the WMA
settings menu.
If you are prompted to enter a password, tap OK.
4
A
Tap Password.
7
5
Enter a password.
Enter a password and tap WMA settings (0 26). Passwords
may be from 8 to 63 characters long.
6
Enable wireless security.
Tap Settings. A confirmation dialog will be displayed; tap
OK.
The iOS device may prompt you for this password the next
time you connect to the camera via Wi-Fi.
A
8
D Security
Although one of the benefits of a wireless-enabled device is that
it allows others to freely connect for the wireless exchange of data
anywhere within its range, the following may occur if security is
not enabled:
• Data theft: Malicious third-parties may intercept wireless transmissions to steal user IDs, passwords, and other personal information.
• Unauthorized access: Unauthorized users may gain access to
the network and alter data or perform other malicious actions.
Note that due to the design of wireless networks, specialized attacks may allow unauthorized access even when security is enabled.
A
9
Taking Photos
Take pictures remotely from the iOS device, or take pictures with
the camera and save them to the iOS device.
Remote Photography
Follow the steps below to take photos from the iOS device.
1
Tap Take photos.
The camera viewfinder will go dark and the iOS device will
display the view through the camera lens.
2
Focus.
In normal- and wide-area AF AF-area modes, tap the subject
in the display to focus (if subject-tracking AF is selected, the
camera will focus using wide-area AF).
A
10
3
Tap the shutter icon.
The shutter will be released after you remove your finger from the icon; the resulting photo is first saved to the camera
memory card and then downloaded to the
iOS device. There is no need to point the
iOS device at the camera.
D Remote Photography
Remote photography ends automatically when the battery in the
camera or iOS device runs low. Note that using remote photography for an extended period may cause the camera’s internal temperature to rise; if necessary, remote photography will end automatically to minimize damage to camera circuits.
The iOS device can not be used to adjust camera settings; use camera controls to adjust settings before starting Step 1. Regardless of
the release mode selected with the camera, only one picture will
be taken each time you tap the shutter icon. Note that the display
may not update smoothly depending on the device and network
conditions, and that panoramas can not be recorded using the
easy panorama feature for the D3300.
A shutter speed of “Time” is available in mode M. Choose a shutter
speed of A on the camera and select Shoot > WMU on the
iOS device (page 12), then tap the shutter icon to open the shutter.
Shooting ends when the icon is tapped again. Note that the iOS
device will not display the view through the camera lens at a shutter
speed of “Bulb”, and that the iOS device can not be used in shooting
mode when “Time” is selected.
A
11
A The Remote Photography Display
Top: Return to the top display.
d: Display the following photographyrelated options.
• Shoot: Choose whether to take pictures using the iOS device (WMU) or
the camera (Camera).
• Live view: Turn the live view display
on or off.
• Download after shooting: Choose
whether pictures are automatically
downloaded to the iOS device. Available only when WMU is selected for
Shoot.
• Self-timer: If On is selected, the camera shutter will be released 2 s after
you tap the shutter icon. The timer
turns off automatically after the shutter is released.
Self-timer icon: Displayed when the selftimer is on.
Camera settings: Shutter speed, aperture,
etc. Not displayed when device is in
landscape orientation.
Thumbnail area: Downloaded pictures.
A
12
Downloading Photos as They Are Taken
Take photos with the camera and save them to the iOS device.
1
Tap Take photos.
2
Tap d.
3
Tap Camera.
A
13
4
Take photos.
Frame photos in the camera viewfinder and shoot. Photos
are downloaded to the iOS device after being saved to the
camera memory card.
A The Photo Capture Display
The photo capture display is shown below.
d: Display Shoot options and choose
whether to take pictures using the iOS
device (WMU) or the camera (Camera).
Top: Return to the top display.
Thumbnail area: Downloaded pictures.
A
14
Viewing Photos
Tap View photos to view the pictures stored on the iOS device.
You can also view the pictures on the camera memory card and
download selected images to the iOS device.
Viewing Pictures
View the pictures in camera memory or on the iOS device.
1
Tap View photos.
If the camera has an option that can be
used to select pictures for transfer, a
confirmation will be displayed if any images are currently selected. Tap Cancel
to view pictures.
A
15
2
Choose a device.
Tap Pictures on camera to view the pictures on the camera
memory card, Camera roll to view the pictures stored in the
camera roll on the iOS device. The pictures will be displayed
as small “thumbnail” images.
3
View pictures.
Tap a thumbnail to display the picture full
frame. You can then swipe left or right to
view additional pictures, or tap a to view
information about the current image.
A
16
D Movies
The Wireless Mobile Utility can not be used to view or download
movies.
D Deleting Pictures
Pictures can not be deleted using the Wireless Mobile Utility, but
pictures can be deleted from the camera roll on the iOS device.
A Choosing a Folder
The iOS device will either show a folder list or display the pictures
on the camera memory card as small “thumbnail” images. When
thumbnails are displayed, the folders can be viewed by tapping the
f icon, while folders are displayed, you can tap a folder to view its
contents in a thumbnail list.
A
17
Downloading Existing Pictures
Download pictures to the camera roll on the iOS device.
1
Tap View photos.
If the camera has an option that can
be used to select pictures for transfer,
a confirmation will be displayed if any
images are currently selected. Tap OK to
begin download.
2
A
Tap Pictures on camera.
Tap Pictures on camera to view the pictures on the camera.
18
3
Select pictures for download.
Tap Select and then
thumbnails to select or
deselect (to deselect all
pictures, tap
). Selected pictures are indicated
by a check mark.
Alternatively, you can select pictures by tapping a picture
in the thumbnail list to display it full frame and then tapping the check mark to select or deselect. Swipe left or
right to view additional pictures. After selecting the desired
pictures, tap the folder name to return to the thumbnail list
and then tap Select.
A
19
D Dropped Connections
If the wireless connection is lost while a picture is being downloaded, the picture will not be saved to the iOS device (connection loss
may occur if, for example, the camera turns off during download).
Any pictures downloaded before the connection was interrupted
are unaffected.
D Downloading Existing Pictures
NEF (RAW) images are converted to JPEG format; if the images were
recorded using an NEF (RAW) + JPEG option, only the JPEG copy
will be downloaded. Exif data will be adapted to iOS specifications.
A
20
4
Tap Download.
Tap Download to download the selected pictures to the camera roll on the iOS
device.
If multiple pictures are selected, a confirmation dialog will be displayed; tap Yes
to download the pictures at the size
selected for Image size in the Settings
menu (page 25).
If only one picture is selected, you will be
prompted to choose the size at which
the picture will be copied to the iOS device. Choose a size (page 25) and then tap
Download to download the picture.
A
21
A Image Size
Regardless of the size selected, pictures may sometimes be downloaded at their original size.
A Location Data
The options shown at right will be displayed
if Settings > Embed location data > Take
photos is enabled (page 26).
A Latest Downloads
Tap Latest downloads to view the 12 most recently downloaded
pictures at their original size and in their original format. Location
data are not included with the files in “Latest downloads”, regardless of the option selected for Settings > Embed location data.
A
22
Sharing Pictures
Connect to the Internet before sharing pictures via third-party
apps or social networking sites or other services. If you are currently connected to the camera via Wi-Fi, end the connection
and connect to a network with Internet access.
1
Tap View photos.
2
Choose Camera roll or Latest downloads.
Tap Camera roll to view the pictures already downloaded to
the iOS camera roll.
A
23
3
View pictures.
Tap a thumbnail to view the picture full frame.
4
Tap b.
After displaying a picture you want to
share, tap b and choose from a list of
picture-sharing apps and functions (the
specific contents of the list vary from device to device).
A
24
Wireless Mobile Utility Options
The options listed below can be accessed by
tapping the c icon in the Wireless Mobile
Utility top display.
Connection Status
Option
Description
Camera
The model name and battery level for the camera currently connected.
Wireless Mobile
Adapter
View the wireless mobile adapter product name and
firmware version. Not available with cameras that feature built-in Wi-Fi.
Settings
Option
Description
Synchronize clock Synchronize the camera clock with the iOS device.
Set camera clock Synchronize the camera clock with the iOS device.
Set
automatically
If On is selected, the camera clock will automatically be
synchronized with the iOS device when a connection
is established.
Thumbnails
Choose the size of the thumbnails in the playback display.
Image size
When downloading multiple images, select Recommended size or VGA to copy images at sizes approximately equivalent to 1920 × 1080 or 640 × 480, respectively.
A
25
Option
Description
WMA settings
(Wireless Mobile Adjust network settings for the wireless mobile adapter.
Adapter settings)
SSID
Choose an SSID for the wireless mobile adapter. The
iOS device displays the SSID when you connect to the
network manually.
Authentication
Choose the authentication method used for connection
to the network.
Password
Enter a password. The password type is selected using
Advanced settings > Password entry: choose ASCII for an
8- to 63-character alphanumeric password, HEX for a
64-digit hexadecimal password.
Channel
Choose the wireless channel used by the network.
Choose the delay before the wireless mobile adapter
Auto power-off
enters sleep when there is no wireless connection. Not
delay
available with cameras that feature built-in Wi-Fi.
Advanced
settings
• Password entry: Choose the password type.
• Sub-net mask: Enter a subnet mask.
• DHCP server IP address: Enter the wireless mobile adapter IP address.
• DHCP client IP address: Enter the iOS device IP address.
Format settings Restore default settings.
Embed location
data
A
Choose whether to embed iOS location data in pictures
not already containing location data provided by the
camera. Note that devices not equipped with GPS or
comparable location data functions may fail to supply
the correct location.
26
Battery Warning Level
Remote photography will end automatically when the camera
or iOS device battery reaches the selected level.
Help
Option
Instructions
Description
View instructions for using the Wireless Mobile Utility.
Support websites
Access the support site for the Wireless Mobile Utility.
App version
View Wireless Mobile Utility version information.
Terms of Use
View the Wireless Mobile Utility terms of use.
A
27
B
D3200, COOLPIX A
This section describes the options available when the Wireless
Mobile Utility and an optional wireless mobile adapter are used
to connect to D3200 and COOLPIX A cameras.
Features
Use the Wireless Mobile Utility to:
Take pictures remotely (0 36): Tap the shutter icon in the Wireless Mobile Utility to
take pictures and download them to
the iOS device.
Download pictures as they are taken (0 39):
Take pictures with the camera and save
them to the iOS device.
View pictures (0 41): View the pictures stored on the iOS device or
the camera memory card.
Download pictures (0 44): Download existing pictures from the camera memory card.
Share pictures (0 48): Share pictures via e-mail or upload pictures to
photo-sharing sites.
For information on inserting the adapter, see page 30.
B
28
Notices
• No part of this manual may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form without Nikon’s prior written permission.
• Nikon reserves the right to change the specifications of the hardware and software described in this manual at any time and
without prior notice. Nikon will not be held liable for damages
that may result from any mistakes that this manual may contain.
D Using This Application for the First Time
Read the terms of use (page 52) before connecting.
D Wi-Fi Security
Password protection and other Wi-Fi security features are not automatically enabled. Be sure to enable Wi-Fi security on the iOS
device after connecting for the first time.
D The Wireless Mobile Adapter
While the adapter is inserted, the camera exposure meters will not
turn off; monitor the camera battery level to ensure that the camera does not power off unexpectedly. In addition, some camera
menu items may be grayed out and unavailable and the camera
can not be used for playback or live view. Movie recording can
not be used.
B
29
Installing the App
1
Locate the app on the App Store.
Connect to the App Store on the iOS device and search for
“Wireless Mobile Utility”.
2
Install the app.
Install the Wireless Mobile Utility.
Establishing a Wireless Connection
1
Connect the wireless mobile adapter.
Attach the wireless mobile adapter to the camera and turn
the camera on. See the manual supplied with the wireless
mobile adapter for details.
2
Enable Wi-Fi on the iOS device.
If Wi-Fi is off, turn it on.
3
Select the appropriate SSID.
The default SSID begins with “Nikon”. iOS-compliant devices
can not be connected using WPS.
4
Launch the Wireless Mobile Utility.
After selecting On for Privacy > Photos > WMU, launch the
Wireless Mobile Utility. When a connection is established,
the LED on the wireless mobile adapter will glow green and
the main dialog for the Wireless Mobile Utility will be displayed on the iOS device. For information on enabling wireless security, see page 32. For information on taking pictures,
see page 36. For information on viewing pictures, see page 41.
B
30
A Connection Status
Connection status is shown by an icon in the
home display:
•
: Connection established.
•
: No connection. Tap the icon to open the
iOS device settings menu and check Wi-Fi
settings.
B
31
Wi-Fi Security
Wi-Fi security will not be enabled the first time you connect.
Security can be enabled by opening the Wireless Mobile Utility
settings menu (0 50) and following the steps below.
1
Tap WMA settings.
2
Tap Authentication.
B
32
23
Select WPA2-PSK-AES.
Tap WPA2-PSK-AES.
Tap WMA settings to return to the WMA
settings menu.
If you are prompted to enter a password, tap OK.
4
B
Tap Password.
33
5
Enter a password.
Enter a password and tap WMA settings (0 51). Passwords
may be from 8 to 63 characters long.
6
Enable wireless security.
Tap Settings. A confirmation dialog will be displayed; tap
OK.
The iOS device may prompt you for this password the next
time you connect to the camera via Wi-Fi.
B
34
D Security
Although one of the benefits of a wireless-enabled device is that
it allows others to freely connect for the wireless exchange of data
anywhere within its range, the following may occur if security is
not enabled:
• Data theft: Malicious third-parties may intercept wireless transmissions to steal user IDs, passwords, and other personal information.
• Unauthorized access: Unauthorized users may gain access to
the network and alter data or perform other malicious actions.
Note that due to the design of wireless networks, specialized attacks may allow unauthorized access even when security is enabled.
B
35
Taking Photos
Take pictures remotely from the iOS device, or take pictures with
the camera and save them to the iOS device.
Remote Photography
Follow the steps below to take photos from the iOS device.
1
Tap Take photos.
The camera viewfinder will go dark and the iOS device will
display the view through the camera lens.
2
Tap the shutter icon.
Tap the shutter. If the camera is able to focus, the shutter will be released after you
remove your finger from the icon; the resulting photo is first saved to the camera
memory card and then downloaded to the
iOS device. There is no need to point the
iOS device at the wireless mobile adapter.
B
36
D Remote Photography
Remote photography ends automatically when the battery in the
camera or iOS device runs low. Note that using remote photography for an extended period may cause the camera’s internal temperature to rise; if necessary, remote photography will end automatically to minimize damage to camera circuits.
The iOS device can not be used to adjust camera settings; use camera controls to adjust settings before starting Step 1. Regardless of
the release mode selected with the camera, only one picture will
be taken each time you tap the shutter icon. Note that the display
may not update smoothly depending on the device and network
conditions.
In normal- and wide-area AF AF-area modes, the camera will focus
on the subject in the focus area selected with the camera; if subjecttracking AF is selected, the camera will focus using wide-area AF.
B
37
A The Remote Photography Display
Top: Return to the top display.
d: Display the following photographyrelated options.
• Shoot (D3200 only): Choose whether
to take pictures using the iOS device
(WMU) or the camera (Camera).
• Download after shooting: Choose
whether pictures are automatically
downloaded to the iOS device. Available only when WMU is selected for
Shoot.
• Self-timer: If On is selected, the camera shutter will be released 2 s after
you tap the shutter icon. The timer
turns off automatically after the shutter is released.
Self-timer icon: Displayed when the selftimer is on.
Camera settings: Shutter speed, aperture,
etc. Not displayed when device is in
landscape orientation.
Thumbnail area: Downloaded pictures.
B
38
Downloading Photos as They Are Taken (D3200 only)
Take photos with the camera and save them to the iOS device.
1
Tap Take photos.
2
Tap d.
3
Tap Camera.
B
39
4
Take photos.
Frame photos in the camera viewfinder and shoot. Photos
are downloaded to the iOS device after being saved to the
camera memory card.
A The Photo Capture Display
The photo capture display is shown below.
d: Display Shoot options and choose
whether to take pictures using the iOS
device (WMU) or the camera (Camera).
Top: Return to the top display.
Thumbnail area: Downloaded pictures.
B
40
Viewing Photos
Tap View photos to view the pictures stored on the iOS device.
You can also view the pictures on the camera memory card and
download selected images to the iOS device.
Viewing Pictures
View the pictures in camera memory or on the iOS device.
1
B
Tap View photos.
41
2
Choose a device.
Tap Pictures on camera to view the pictures on the camera
memory card, Camera roll to view the pictures stored in the
camera roll on the iOS device. The pictures will be displayed
as small “thumbnail” images.
3
View pictures.
Tap a thumbnail to display the picture full
frame. You can then swipe left or right to
view additional pictures, or tap a to view
information about the current image.
B
42
D Movies
The Wireless Mobile Utility can not be used to view or download
movies.
D Deleting Pictures
Pictures can not be deleted using the Wireless Mobile Utility, but
pictures can be deleted from the camera roll on the iOS device.
A Choosing a Folder
The iOS device will either show a folder list or display the pictures
on the camera memory card as small “thumbnail” images. When
thumbnails are displayed, the folders can be viewed by tapping the
f icon, while folders are displayed, you can tap a folder to view its
contents in a thumbnail list.
B
43
Downloading Existing Pictures
Download pictures to the camera roll on the iOS device.
1
Tap View photos.
2
Tap Pictures on camera.
Tap Pictures on camera to view the pictures on the camera.
D Dropped Connections
If the wireless connection is lost while a picture is being downloaded, the picture will not be saved to the iOS device (connection loss
may occur if, for example, the camera turns off during download).
Any pictures downloaded before the connection was interrupted
are unaffected.
B
44
3
Select pictures for download.
Tap Select and then
thumbnails to select or
deselect (to deselect all
pictures, tap
). Selected pictures are indicated
by a check mark.
Alternatively, you can select pictures by tapping a picture
in the thumbnail list to display it full frame and then tapping the check mark to select or deselect. Swipe left or
right to view additional pictures. After selecting the desired
pictures, tap the folder name to return to the thumbnail list
and then tap Select.
D Downloading Existing Pictures
NEF (RAW) images are converted to JPEG format; if the images were
recorded using an NEF (RAW) + JPEG option, only the JPEG copy
will be downloaded. Exif data will be adapted to iOS specifications.
B
45
4
Tap Download.
Tap Download to download the selected pictures to the camera roll on the iOS
device.
If multiple pictures are selected, a confirmation dialog will be displayed; tap Yes
to download the pictures at the size
selected for Image size in the Settings
menu (page 50).
If only one picture is selected, you will be
prompted to choose the size at which
the picture will be copied to the iOS device. Choose a size (page 50) and then tap
Download to download the picture.
B
46
A Image Size
Regardless of the size selected, pictures may sometimes be downloaded at their original size.
A Location Data
The options shown at right will be displayed
if Settings > Embed location data > Take
photos is enabled (page 51).
A Latest Downloads
Tap Latest downloads to view the 12 most recently downloaded
pictures at their original size and in their original format. Location
data are not included with the files in “Latest downloads”, regardless of the option selected for Settings > Embed location data.
B
47
Sharing Pictures
Connect to the Internet before sharing pictures via third-party
apps or social networking sites or other services. If you are currently connected to the camera via Wi-Fi, end the connection
and connect to a network with Internet access.
1
Tap View photos.
2
Choose Camera roll or Latest downloads.
Tap Camera roll to view the pictures already downloaded to
the iOS camera roll.
B
48
3
View pictures.
Tap a thumbnail to view the picture full frame.
4
Tap b.
After displaying a picture you want to
share, tap b and choose from a list of
picture-sharing apps and functions (the
specific contents of the list vary from device to device).
B
49
Wireless Mobile Utility Options
The options listed below can be accessed by
tapping the c icon in the Wireless Mobile
Utility top display.
Connection Status
Option
Description
Camera
The model name and battery level for the camera currently connected.
Wireless Mobile
Adapter
View the wireless mobile adapter product name and
firmware version.
Settings
Option
Description
Synchronize clock Synchronize the camera clock with the iOS device.
Set camera clock Synchronize the camera clock with the iOS device.
Set
automatically
If On is selected, the camera clock will automatically be
synchronized with the iOS device when a connection
is established.
Thumbnails
Choose the size of the thumbnails in the playback display.
Image size
When downloading multiple images, select Recommended size or VGA to copy images at sizes approximately equivalent to 1920 × 1080 or 640 × 480, respectively.
B
50
Option
Description
WMA settings
(Wireless Mobile Adjust network settings for the wireless mobile adapter.
Adapter settings)
SSID
Choose an SSID for the wireless mobile adapter. The
iOS device displays the SSID when you connect to the
network manually.
Authentication
Choose the authentication method used for connection
to the network.
Password
Enter a password. The password type is selected using
Advanced settings > Password entry: choose ASCII for an
8- to 63-character alphanumeric password, HEX for a
64-digit hexadecimal password.
Channel
Choose the wireless channel used by the network.
Auto power-off Choose the delay before the wireless mobile adapter
delay
enters sleep when there is no wireless connection.
Advanced
settings
• Password entry: Choose the password type.
• Sub-net mask: Enter a subnet mask.
• DHCP server IP address: Enter the wireless mobile adapter IP address.
• DHCP client IP address: Enter the iOS device IP address.
Format settings Restore default settings.
Embed location
data
B
Choose whether to embed iOS location data in pictures
not already containing location data provided by the
camera. Note that devices not equipped with GPS or
comparable location data functions may fail to supply
the correct location.
51
Battery Warning Level
Remote photography will end automatically when the camera
or iOS device battery reaches the selected level.
Help
Option
Instructions
Description
View instructions for using the Wireless Mobile Utility.
Support websites
Access the support site for the Wireless Mobile Utility.
App version
View Wireless Mobile Utility version information.
Terms of Use
View the Wireless Mobile Utility terms of use.
B
52
C
Nikon 1 Cameras
This section describes the options available when the Wireless
Mobile Utility is used with Nikon 1 cameras that offer built-in WiFi or support the optional wireless mobile adapter.
Features
Use the Wireless Mobile Utility to:
Take pictures remotely (0 60): Tap the shutter icon in the Wireless Mobile Utility to
take pictures and download them to
the iOS device.
View pictures (0 63): View the pictures stored on the iOS device or
the camera memory card.
Download pictures (0 66): Download existing pictures from the camera memory card.
Share pictures (0 71): Share pictures via e-mail or upload pictures to
photo-sharing sites.
For information on establishing a connection, see page 55.
C
53
Notices
• No part of this manual may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form without Nikon’s prior written permission.
• Nikon reserves the right to change the specifications of the hardware and software described in this manual at any time and
without prior notice. Nikon will not be held liable for damages
that may result from any mistakes that this manual may contain.
D Using This Application for the First Time
Read the terms of use (page 75) before connecting.
D Wi-Fi Security
Password protection and other Wi-Fi security features are not automatically enabled. Be sure to enable Wi-Fi security on the iOS device after connecting for the first time. If you are using a Nikon 1 J5,
enable security on the camera before connecting.
D The Wireless Mobile Adapter
While the adapter is inserted, the camera exposure meters will not
turn off; monitor the camera battery level to ensure that the camera does not power off unexpectedly. In addition, some camera
menu items may be grayed out and unavailable and the camera
can not be used for playback or live view. Movie recording can
not be used.
C
54
Installing the App
1
Locate the app on the App Store.
Connect to the App Store on the iOS device and search for
“Wireless Mobile Utility”.
2
Install the app.
Install the Wireless Mobile Utility.
Establishing a Wireless Connection
The procedure varies with the type of camera.
Cameras with Built-in Wireless LAN
See the camera manual.
Cameras Without Built-in Wireless LAN
1
Connect the wireless mobile adapter.
Attach the wireless mobile adapter to the camera and turn
the camera on. See the manual supplied with the wireless
mobile adapter for details.
2
Enable Wi-Fi on the iOS device.
If Wi-Fi is off, turn it on.
3
Select the appropriate SSID.
The default SSID begins with “Nikon”. iOS-compliant devices
can not be connected using WPS.
4
Launch the Wireless Mobile Utility.
After selecting On for Privacy > Photos > WMU, launch the
Wireless Mobile Utility. When a connection is established,
the LED on the wireless mobile adapter will glow green and
the main dialog for the Wireless Mobile Utility will be displayed on the iOS device. For information on enabling wireless security, see page 57. For information on taking pictures,
see page 60. For information on viewing pictures, see page 63.
C
55
A Connection Status
Connection status is shown by an icon in the
home display:
•
: Connection established.
•
: No connection. Tap the icon to open the
iOS device settings menu and check Wi-Fi
settings.
C
56
Wi-Fi Security
Wi-Fi security will not be enabled the first time you connect. Users
of the Nikon 1 V3 or J4 or the wireless mobile adapter can enable
security by opening the Wireless Mobile Utility settings menu
(0 73) and following the steps below. Users of the Nikon 1 J5
should instead enable security on the camera before connecting.
1
Tap WMA settings.
2
Tap Authentication.
C
57
23
Select WPA2-PSK-AES.
Tap WPA2-PSK-AES.
Tap WMA settings to return to the WMA
settings menu.
If you are prompted to enter a password, tap OK.
4
Tap Password.
5
Enter a password.
Enter a password and tap WMA settings
(0 74). Passwords may be from 8 to 63
characters long.
C
58
6
Enable wireless security.
Tap Settings. A confirmation dialog will be displayed; tap
OK.
The iOS device may prompt you for this password the next
time you connect to the camera via Wi-Fi.
D Security
Although one of the benefits of a wireless-enabled device is that
it allows others to freely connect for the wireless exchange of data
anywhere within its range, the following may occur if security is
not enabled:
• Data theft: Malicious third-parties may intercept wireless transmissions to steal user IDs, passwords, and other personal information.
• Unauthorized access: Unauthorized users may gain access to
the network and alter data or perform other malicious actions.
Note that due to the design of wireless networks, specialized attacks may allow unauthorized access even when security is enabled.
C
59
Taking Photos
Follow the steps below to take photos from the iOS device.
1
Tap Take photos.
The camera viewfinder will go dark and the iOS device will
display the view through the camera lens.
2
Tap the shutter icon.
The shutter will be released after you remove your finger from the icon and the
camera focuses (note that no photo will be
taken if the camera is unable to focus); the
resulting photo is first saved to the camera
memory card and then downloaded to the
iOS device. There is no need to point the
iOS device at the wireless mobile adapter.
C
60
D Remote Photography
Remote photography ends automatically when the battery in the
camera or iOS device runs low. Note that using remote photography for an extended period may cause the camera’s internal temperature to rise; if necessary, remote photography will end automatically to minimize damage to camera circuits.
The iOS device can not be used to adjust camera settings; use camera controls to adjust settings before starting Step 1. Regardless of
the release mode selected with the camera, only one picture will
be taken each time you tap the shutter icon. Note that the display
may not update smoothly depending on the device and network
conditions.
Regardless of the settings selected with the camera, pictures will be
taken in mode P (programmed auto) using single-servo autofocus
(AF-S) and auto-area AF. Face-priority AF is disabled and the focus
point is not displayed.
C
61
A The Remote Photography Display
Top: Return to the top display.
d: Display the following photographyrelated options.
• Download after shooting: Choose whether pictures are automatically downloaded
to the iOS device.
• Self-timer: If On is selected, a icon will
be displayed and the camera shutter will
be released 2 s after you tap the shutter
icon. The timer turns off automatically after the shutter is released.
Brightness (Nikon 1 J5 only): Tapping displays
a slider that lets you adjust image brightness
using the camera’s exposure compensation
control.
Darker
Brighter
Camera settings: Shutter speed, aperture, etc.
Not displayed when device is in landscape
orientation.
Thumbnail area: Downloaded pictures.
C
62
Viewing Photos
Tap View photos to view the pictures stored on the iOS device.
You can also view the pictures on the camera memory card and
download selected images to the iOS device.
Viewing Pictures
View the pictures in camera memory or on the iOS device.
1
Tap View photos.
If the camera has an option that can be
used to select pic­tures for transfer, a
confirmation will be displayed if any im­
ages are currently selected. Tap Cancel
to view pictures.
C
63
2
Choose a device.
Tap Pictures on camera to view the pictures on the camera
memory card, Camera roll to view the pictures stored in the
camera roll on the iOS device. The pictures will be displayed
as small “thumbnail” images.
3
View pictures.
Tap a thumbnail to display the picture full
frame. You can then swipe left or right to
view additional pictures, or tap a to view
information about the current image.
C
64
D Movies
The Wireless Mobile Utility can not be used to view or download
movies.
D Deleting Pictures
Pictures can not be deleted using the Wireless Mobile Utility, but
pictures can be deleted from the camera roll on the iOS device.
A Choosing a Folder
The iOS device will either show a folder list or display the pictures
on the camera memory card as small “thumbnail” images. When
thumbnails are displayed, the folders can be viewed by tapping the
f icon, while folders are displayed, you can tap a folder to view its
contents in a thumbnail list.
C
65
Downloading Existing Pictures
Download pictures to the camera roll on the iOS device.
1
Tap View photos.
If the camera has an option that can
be used to select pic­tures for transfer,
a confirmation will be displayed if any
im­ages are currently selected. Tap OK to
begin download.
2
C
Tap Pictures on camera.
Tap Pictures on camera to view the pictures on the camera.
66
3
Select pictures for download.
Tap Select and then
thumbnails to select or
deselect (to deselect all
pictures, tap
). Selected pictures are indicated
by a check mark.
Alternatively, you can select pictures by tapping a picture
in the thumbnail list to display it full frame and then tapping the check mark to select or deselect. Swipe left or
right to view additional pictures. After selecting the desired
pictures, tap the folder name to return to the thumbnail list
and then tap Select.
C
67
D Dropped Connections
If the wireless connection is lost while a picture is being downloaded, the picture will not be saved to the iOS device (connection loss
may occur if, for example, the camera turns off during download).
Any pictures downloaded before the connection was interrupted
are unaffected.
D Downloading Existing Picture
NEF (RAW) images are converted to JPEG format; if the images were
recorded using an NEF (RAW) + JPEG option, only the JPEG copy
will be downloaded. Exif data will be adapted to iOS specifications.
C
68
4
Tap Download.
Tap Download to download the selected pictures to the camera roll on the iOS
device.
If multiple pictures are selected, a confirmation dialog will be displayed; tap Yes
to download the pictures at the size
selected for Image size in the Settings
menu (page 73).
If only one picture is selected, you will be
prompted to choose the size at which
the picture will be copied to the iOS device. Choose a size (page 73) and then tap
Download to download the picture.
C
69
A Image Size
Regardless of the size selected, pictures may sometimes be downloaded at their original size.
A Location Data
The options shown at right will be displayed
if Settings > Embed location data > Take
photos is enabled (page 74).
A Latest Downloads
Tap Latest downloads to view the 12 most recently downloaded
pictures at their original size and in their original format. Location
data are not included with the files in “Latest downloads”, regardless of the option selected for Settings > Embed location data.
C
70
Sharing Pictures
Connect to the Internet before sharing pictures via third-party
apps or social networking sites or other services. If you are currently connected to the camera via Wi-Fi, end the connection
and connect to a network with Internet access.
1
Tap View photos.
2
Choose Camera roll or Latest downloads.
Tap Camera roll to view the pictures already downloaded to
the iOS camera roll.
C
71
3
View pictures.
Tap a thumbnail to view the picture full frame.
4
Tap b.
After displaying a picture you want to
share, tap b and choose from a list of picture-sharing apps and functions (the specific contents of the list vary from device to
device).
C
72
Wireless Mobile Utility Options
The options listed below can be accessed by
tapping the c icon in the Wireless Mobile
Utility top display.
Connection Status
Option
Description
Camera
The model name and battery level for the camera currently connected.
Wireless Mobile
Adapter
View the wireless mobile adapter product name and
firmware version.
Settings
Option
Description
Synchronize clock Synchronize the camera clock with the iOS device.
Set camera clock Synchronize the camera clock with the iOS device.
Set
automatically
If On is selected, the camera clock will automatically be
synchronized with the iOS device when a connection
is established.
Thumbnails
Choose the size of the thumbnails in the playback display.
Image size
When downloading multiple images, select Recommended size or VGA to copy images at sizes approximately equivalent to 1920 × 1080 or 640 × 480, respectively.
C
73
Option
Description
WMA settings
Adjust network settings for the wireless mobile adapter.
(Wireless Mobile
Not available with the Nikon 1 J5.
Adapter settings)
SSID
Choose an SSID for the wireless mobile adapter. The
iOS device displays the SSID when you connect to the
network manually.
Authentication
Choose the authentication method used for connection
to the network.
Password
Enter a password. The password type is selected using
Advanced settings > Password entry: choose ASCII for an
8- to 63-character alphanumeric password, HEX for a
64-digit hexadecimal password.
Channel
Choose the wireless channel used by the network.
Auto power-off Choose the delay before the wireless mobile adapter
delay
enters sleep when there is no wireless connection.
Advanced
settings
• Password entry: Choose the password type.
• Sub-net mask: Enter a subnet mask.
• DHCP server IP address: Enter the wireless mobile adapter IP address.
• DHCP client IP address: Enter the iOS device IP address.
Format settings Restore default settings.
Embed location
data
C
Choose whether to embed iOS location data in pictures
not already containing location data provided by the
camera. Note that devices not equipped with GPS or
comparable location data functions may fail to supply
the correct location.
74
Battery Warning Level
Remote photography will end automatically when the camera
or iOS device battery reaches the selected level.
Help
Option
Instructions
Description
View instructions for using the Wireless Mobile Utility.
Support websites
Access the support site for the Wireless Mobile Utility.
App version
View Wireless Mobile Utility version information.
Terms of Use
View the Wireless Mobile Utility terms of use.
C
75
D
Other COOLPIX Cameras
This section describes the options available when the Wireless
Mobile Utility is used with COOLPIX cameras that offer built-in
Wi-Fi or support the optional wireless mobile adapter.
Features
Use the Wireless Mobile Utility to:
Take pictures remotely (0 86): Tap the shutter icon in the Wireless Mobile Utility to
take pictures and download them to
the iOS device.
Download pictures as they are taken (0 89):
Take pictures with a compatible camera and save them to the iOS device.
View pictures (0 91): View the pictures stored on the iOS device or
the camera memory card.
Download pictures (0 94): Download existing pictures from the camera memory card.
Share pictures (0 99): Share pictures via e-mail or upload pictures to
photo-sharing sites.
For information on establishing a connection, see page 78.
D
76
Notices
• No part of this manual may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form without Nikon’s prior written permission.
• Nikon reserves the right to change the specifications of the hardware and software described in this manual at any time and
without prior notice. Nikon will not be held liable for damages
that may result from any mistakes that this manual may contain.
D Using This Application for the First Time
Read the terms of use (page 103) before connecting.
D Wi-Fi Security
Password protection and other Wi-Fi security features are not automatically enabled. If you are using a wireless mobile adapter, be
sure to enable Wi-Fi security on the iOS device after connecting for
the first time. If you are using a camera with built-in Wi-Fi, enable
security on the camera before connecting (0 83).
D Wi-Fi
The camera Wi-Fi function is available only when a memory card is
inserted and no USB or HDMI cables are connected.
D
77
Installing the App
1
Locate the app on the App Store.
Connect to the App Store on the iOS device and search for
“Wireless Mobile Utility”.
2
Install the app.
Install the Wireless Mobile Utility.
Establishing a Wireless Connection
The following applies only to cameras without built-in Wi-Fi. For
information on cameras with built-in Wi-Fi, see the manual provided with the camera.
1
Connect the wireless mobile adapter.
Attach the wireless mobile adapter to the camera and turn
the camera on. See the manual supplied with the wireless
mobile adapter for details.
2
Enable Wi-Fi on the iOS device.
If Wi-Fi is off, turn it on.
3
Select the appropriate SSID.
The default SSID begins with “Nikon”. iOS-compliant devices
can not be connected using WPS.
4
Launch the Wireless Mobile Utility.
After selecting On for Privacy > Photos > WMU, launch the
Wireless Mobile Utility. When a connection is established,
the LED on the wireless mobile adapter will glow green and
the main dialog for the Wireless Mobile Utility will be displayed on the iOS device. After enabling wireless security
(0 80), take and view pictures as described on pages 86 and
91, respectively.
D
78
D The Wireless Mobile Adapter (for Cameras Without Built-in Wi-Fi)
While the adapter is inserted, the camera exposure meters will not
turn off; monitor the camera battery level to ensure that the camera does not power off unexpectedly. In addition, some camera
menu items may be grayed out and unavailable and the camera
can not be used for playback or live view. Movie recording can
not be used.
A Connection Status
Connection status is shown by an icon in the
home display:
•
: Connection established.
•
: No connection. Tap the icon to open the
iOS device settings menu and check Wi-Fi
settings.
D
79
Wi-Fi Security
Wi-Fi security will not be enabled the first time you connect. If
you are using a wireless mobile adapter, security can be enabled
in the Wireless Mobile Utility settings menu (see below). If you
are using a camera with built-in Wi-Fi, enable security on the
camera before connecting (0 83).
The Wireless Mobile Adapter
To enable wireless security, open the Wireless Mobile Utility settings menu (0 101) and follow the steps below.
1
Tap WMA settings.
2
Tap Authentication.
D
80
23
Select WPA2-PSK-AES.
Tap WPA2-PSK-AES.
Tap WMA settings to return to the WMA
settings menu.
If you are prompted to enter a password, tap OK.
4
D
Tap Password.
81
5
Enter a password.
Enter a password and tap WMA settings (0 102). Passwords
may be from 8 to 63 characters long.
6
Enable wireless security.
Tap Settings. A confirmation dialog will be displayed; tap
OK.
The iOS device may prompt you for this password the next
time you connect to the camera via Wi-Fi.
D
82
Cameras with Built-in Wi-Fi
Wireless security can be enabled from the camera Wi-Fi options
menu or using the Wi-Fi options item in the setup menu. The
example below shows the menus for the COOLPIX S5200.
1
Select Wi-Fi options.
Highlight Wi-Fi options in the camera setup menu and
press h.
2
Enable encryption.
Select Auth./encryp. to display encryption options. Highlight WPA2-PSK-AES and press h to return to the Wi-Fi options menu.
D
83
3
Select Password.
Highlight Password and press h.
4
Enter a password.
Enter a password and press
. The password may be between 8 and 16 characters long. The iOS device may prompt
you to enter the password the next time you connect to the
camera.
A Viewing Wireless Security Settings
To view the current password and authentication/encryption settings, highlight Current settings in the Wi-Fi options menu and
press h.
D
84
D Security
Although one of the benefits of a wireless-enabled device is that
it allows others to freely connect for the wireless exchange of data
anywhere within its range, the following may occur if security is
not enabled:
• Data theft: Malicious third-parties may intercept wireless transmissions to steal user IDs, passwords, and other personal information.
• Unauthorized access: Unauthorized users may gain access to
the network and alter data or perform other malicious actions.
Note that due to the design of wireless networks, specialized attacks may allow unauthorized access even when security is enabled.
D
85
Taking Photos
Take pictures remotely from the iOS device, or take pictures with
the camera and save them to the iOS device.
Remote Photography
Follow the steps below to take photos from the iOS device.
1
Tap Take photos.
The camera viewfinder will go dark and the iOS device will
display the view through the camera lens.
2
Tap the shutter icon.
The shutter will be released after you remove your finger from the icon and the
camera focuses; the resulting photo is first
saved to the camera memory card and
then downloaded to the iOS device. There
is no need to point the iOS device at the
camera.
D
86
D Remote Photography
Remote photography ends automatically when the battery in the
camera or iOS device runs low. Note that using remote photography for an extended period may cause the camera’s internal temperature to rise; if necessary, remote photography will end automatically to minimize damage to camera circuits.
The iOS device can not be used to adjust camera settings; use camera controls to adjust settings before starting Step 1. Regardless of
the release mode selected with the camera, only one picture will
be taken each time you tap the shutter icon. Note that the display
may not update smoothly depending on the device and network
conditions.
Regardless of the settings selected with the camera, pictures will be
taken in C (auto) mode using target finding autofocus. The focus
point is not displayed.
D
87
A The Remote Photography Display
Top: Return to the top display.
d: Display the following photography-related options.
• Shoot *: Choose whether to take pictures using the iOS device (WMU) or
the camera (Camera).
• Download after shooting: Choose
whether pictures are automatically
downloaded to the iOS device. Available only when WMU is selected for
Shoot.
• Self-timer: If On is selected, the camera shutter will be released 2 s after
you tap the shutter icon. The timer
turns off automatically after the shutter is released.
Self-timer icon: Displayed when the selftimer is on.
Camera settings: Shutter speed, aperture,
etc. Not displayed when device is in
landscape orientation.
Optical zoom: Tap T to zoom in, W to zoom
out.
Thumbnail area: Downloaded pictures.
* Compatible cameras only.
D
88
Downloading Photos as They Are Taken
(Supported Cameras Only)
If the camera supports photo capture, you have the option of
saving new photos to the iOS device.
1
Tap Take photos.
2
Tap d.
3
Tap Camera.
D
89
4
Take photos.
Use the camera to frame and shoot photos. Photos are
downloaded to the iOS device after being saved to the camera memory card.
A The Photo Capture Display
The photo capture display is shown below.
d: Display Shoot options and choose
whether to take pictures using the iOS
device (WMU) or the camera (Camera).
Top: Return to the top display.
Thumbnail area: Downloaded pictures.
D
90
Viewing Photos
Tap View photos to view the pictures stored on the iOS device.
You can also view the pictures on the camera memory card and
download selected images to the iOS device.
Viewing Pictures
View the pictures in camera memory or on the iOS device.
1
Tap View photos.
If the camera has an option that can be
used to select pictures for transfer, a
confirmation will be displayed if any images are currently selected. Tap Cancel
to view pictures.
D
91
2
Choose a device.
Tap Pictures on camera to view the pictures on the camera
memory card, Camera roll to view the pictures stored in the
camera roll on the iOS device. The pictures will be displayed
as small “thumbnail” images.
3
View pictures.
Tap a thumbnail to display the picture full
frame. You can then swipe left or right to
view additional pictures, or tap a to view
information about the current image.
D
92
D Movies
The Wireless Mobile Utility can not be used to view or download
movies.
D Deleting Pictures
Pictures can not be deleted using the Wireless Mobile Utility, but
pictures can be deleted from the camera roll on the iOS device.
A Choosing a Folder
The iOS device will either show a folder list or display the pictures
on the camera memory card as small “thumbnail” images. When
thumbnails are displayed, the folders can be viewed by tapping the
f icon, while folders are displayed, you can tap a folder to view its
contents in a thumbnail list.
D
93
Downloading Existing Pictures
Download pictures to the camera roll on the iOS device.
1
Tap View photos.
If the camera has an option that can
be used to select pictures for transfer,
a confirmation will be displayed if any
images are currently selected. Tap OK to
begin download.
2
D
Tap Pictures on camera.
Tap Pictures on camera to view the pictures on the camera.
94
3
Select pictures for download.
Tap Select and then
thumbnails to select or
deselect (to deselect all
pictures, tap
). Selected pictures are indicated
by a check mark.
Alternatively, you can select pictures by tapping a picture
in the thumbnail list to display it full frame and then tapping the check mark to select or deselect. Swipe left or
right to view additional pictures. After selecting the desired
pictures, tap the folder name to return to the thumbnail list
and then tap Select.
D
95
D Dropped Connections
If the wireless connection is lost while a picture is being downloaded,
the picture will not be saved to the iOS device (connection loss may occur if, for example, the camera turns off during download). Any pictures
downloaded before the connection was interrupted are unaffected.
D Downloading Existing Pictures
NEF (RAW) images are converted to JPEG format; if the images
were recorded using an NEF (RAW) + JPEG option, only the JPEG
copy will be downloaded. 3D images are converted to 2D JPEG
images. Exif data will be adapted to iOS specifications.
D
96
4
Tap Download.
Tap Download to download the selected pictures to the camera roll on the iOS
device.
If multiple pictures are selected, a confirmation dialog will be displayed; tap Yes
to download the pictures at the size
selected for Image size in the Settings
menu (page 101).
If only one picture is selected, you will be
prompted to choose the size at which
the picture will be copied to the iOS device. Choose a size (page 101) and then tap
Download to download the picture.
D
97
A Image Size
Regardless of the size selected, pictures may sometimes be downloaded at their original size.
A Location Data
The options shown at right will be displayed
if Settings > Embed location data > Take
photos is enabled (page 102).
A Latest Downloads
Tap Latest downloads to view the 12 most recently downloaded
pictures at their original size and in their original format (note that
3D images are displayed in JPEG format and not as 3D images).
Location data are not included with the files in “Latest downloads”,
regardless of the option selected for Settings > Embed location
data.
D
98
Sharing Pictures
Connect to the Internet before sharing pictures via third-party
apps or social networking sites or other services. If you are currently connected to the camera via Wi-Fi, end the connection
and connect to a network with Internet access.
1
Tap View photos.
2
Choose Camera roll or Latest downloads.
Tap Camera roll to view the pictures already downloaded to
the iOS camera roll.
D
99
3
View pictures.
Tap a thumbnail to view the picture full frame.
4
Tap b.
After displaying a picture you want to
share, tap b and choose from a list of
picture-sharing apps and functions (the
specific contents of the list vary from device to device).
D
100
Wireless Mobile Utility Options
The options listed below can be accessed by
tapping the c icon in the Wireless Mobile
Utility top display.
Connection Status
Option
Description
Camera
The model name and battery level for the camera currently connected.
Wireless Mobile
Adapter
View the wireless mobile adapter product name and
firmware version. Not available with cameras that feature built-in Wi-Fi.
Settings
Option
Description
Synchronize clock Synchronize the camera clock with the iOS device.
Set camera clock Synchronize the camera clock with the iOS device.
Set
automatically
If On is selected, the camera clock will automatically be
synchronized with the iOS device when a connection
is established.
Thumbnails
Choose the size of the thumbnails in the playback display.
Image size
When downloading multiple images, select Recommended size or VGA to copy images at sizes approximately equivalent to 1920 × 1080 or 640 × 480, respectively.
D
101
Option
Description
WMA settings
Adjust network settings for the wireless mobile adapter.
(Wireless Mobile
Not available with cameras that feature built-in Wi-Fi.
Adapter settings)
SSID
Choose an SSID for the wireless mobile adapter. The
iOS device displays the SSID when you connect to the
network manually.
Authentication
Choose the authentication method used for connection
to the network.
Password
Enter a password. The password type is selected using
Advanced settings > Password entry: choose ASCII for an
8- to 63-character alphanumeric password, HEX for a
64-digit hexadecimal password.
Channel
Choose the wireless channel used by the network.
Auto power-off Choose the delay before the wireless mobile adapter
delay
enters sleep when there is no wireless connection.
Advanced
settings
• Password entry: Choose the password type.
• Sub-net mask: Enter a subnet mask.
• DHCP server IP address: Enter the wireless mobile adapter IP address.
• DHCP client IP address: Enter the iOS device IP address.
Format settings Restore default settings.
Embed location
data
D
Choose whether to embed iOS location data in pictures
not already containing location data provided by the
camera. Note that devices not equipped with GPS or
comparable location data functions may fail to supply
the correct location.
102
Battery Warning Level
Remote photography will end automatically when the camera
or iOS device battery reaches the selected level.
Help
Option
Instructions
Description
View instructions for using the Wireless Mobile Utility.
Support websites
Access the support site for the Wireless Mobile Utility.
App version
View Wireless Mobile Utility version information.
Terms of Use
View the Wireless Mobile Utility terms of use.
D
103
A Trademark Information
Wi-Fi is a registered trademark of the Wi-Fi Alliance. IOS is a trademark or registered trademark of Cisco in the U. S. A. and other countries and is used under license. All other trade names mentioned
in this manual are the trademarks or registered trademarks of their
respective holders.
SB9C22(11)
6MWA3311-22
D
104
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising