Hotpoint | HR 617 B H | Instruction for Use | Hotpoint HR 617 B H Instruction for Use

Hotpoint HR 617 B H Instruction for Use
EN
SAFETY INSTRUCTIONS
IMPORTANT TO BE READ AND OBSERVED
Download the complete instruction manual on
http:‌//d
‌ ocs‌.‌hotpoint‌.e
‌ u or call the phone number
shown on the warranty booklet.
No other use is permitted (e.g. heating rooms).
This appliance is not for professional use. Do not
use the appliance outdoors.
Before using the appliance, read these safety
instructions. Keep them nearby for future reference.
These instructions and the appliance itself provide
important safety warnings, to be observed at all
times. The manufacturer declines any liability for
failure to observe these safety instructions, for
inappropriate use of the appliance or incorrect
setting of controls.
Very young children (0-3 years) should be kept
away from the appliance. Young children (3-8 years)
should be kept away from the appliance unless
continuously supervised. Children from 8 years old
and above and persons with reduced physical,
sensory or mental capabilities or lack of experience
and knowledge can use this appliance only if they
are supervised or have been given instructions on
safe use and understand the hazards involved.
Children must not play with the appliance. Cleaning
and user maintenance must not be carried out by
children without supervision.
WARNING: The appliance and its accessible parts
become hot during use. Care should be taken to
avoid touching heating elements.
Children less than 8 years of age shall be kept away
unless continuously supervised.
WARNING: If the hob surface is cracked, do not
use the appliance - risk of electric shock.
WARNING: Danger of fire: Do not store items on
the cooking surfaces.
CAUTION: The cooking process has to be
supervised. A short cooking process has to be
supervised continuously.
WARNING: Unattended cooking on a hob with
fat or oil can be dangerous - risk of fire. NEVER try to
extinguish a fire with water: instead, switch off the
appliance and then cover flame e.g. with a lid or a
fire blanket.
Do not use the hob as a work surface or support.
Keep clothes or other flammable materials away
from the appliance, until all the components have
cooled down completely - risk of fire.
PERMITTED USE
CAUTION: the appliance is not intended to be
operated by means of an external switching device,
such as a timer, or separate remote controlled
system.
This appliance is intended to be used in household
and similar applications such as: staff kitchen areas
in shops, offices and other working environments;
farm houses; by clients in hotels, motels, bed &
breakfast and other residential environments.
INSTALLATION
The appliance must be handled and installed by
two or more persons - risk of injury. Use protective
gloves to unpack and install - risk of cuts.
Installation, including water supply (if any),
electrical connections and repairs must be carried
out by a qualified technician. Do not repair or replace
any part of the appliance unless specifically stated in
the user manual. Keep children away from the
installation site. After unpacking the appliance,
make sure that it has not been damaged during
transport. In the event of problems, contact the
dealer or your nearest After-sales Service. Once
installed, packaging waste (plastic, styrofoam parts
etc.) must be stored out of reach of children - risk of
suffocation. The appliance must be disconnected
from the power supply before any installation
operation - risk of electric shock. During installation,
make sure the appliance does not damage the
power cable - risk of fire or electric shock. Only
activate the appliance when the installation has
been completed.
Carry out all cabinet cutting operations before
fitting the appliance and remove all wood chips and
sawdust.
If the appliance is not installed above an oven, a
separator panel (not included) must be installed in
the compartment under the appliance.
ELECTRICAL WARNINGS
It must be possible to disconnect the appliance
from the power supply by unplugging it if plug is
accessible, or by a multi-pole switch installed
upstream of the socket in accordance with the
wiring rules and the appliance must be earthed in
conformity with national electrical safety standards.
Do not use extension leads, multiple sockets or
adapters. The electrical components must not be
accessible to the user after installation. Do not use
the appliance when you are wet or barefoot. Do not
operate this appliance if it has a damaged power
cable or plug, if it is not working properly, or if it has
been damaged or dropped.
If the supply cord is damaged, it must be replaced
with an identical one by the manufacturer, its service
agent or similarly qualified persons in order to avoid
a hazard - risk of electric shock.
CLEANING AND MAINTENANCE
WARNING: Ensure that the appliance is switched
off and disconnected from the power supply before
performing any maintenance operation; never use
steam cleaning equipment - risk of electric shock.
Do not use abrasive or corrosive products,
chlorine-based cleaners or pan scourers.
DISPOSAL OF PACKAGING MATERIALS
The packaging material is 100% recyclable and is marked with the recycle
symbol
.
The various parts of the packaging must therefore be disposed of
responsibly and in full compliance with local authority regulations
governing waste disposal.
DISPOSAL OF HOUSEHOLD APPLIANCES
This appliance is manufactured with recyclable or reusable materials.
Dispose of it in accordance with local waste disposal regulations.
For further information on the treatment, recovery and recycling of
household electrical appliances, contact your local authority, the
collection service for household waste or the store where you purchased
the appliance. This appliance is marked in compliance with European
Directive 2012/19/EU, Waste Electrical and Electronic Equipment (WEEE).
By ensuring this product is disposed of correctly, you will help prevent
negative consequences for the environment and human health.
The symbol on the product or on the accompanying documentation
indicates that it should not be treated as domestic waste but must be
taken to an appropriate collection center for the recycling of electrical
and electronic equipment.
ENERGY SAVING TIPS
Make the most of your hot plate’s residual heat by switching it off a few
minutes before you finish cooking.
The base of your pot or pan should cover the hot plate completely; a
container that is smaller than the hot plate will cause energy to be wasted.
Cover your pots and pans with tight-fitting lids while cooking and use
as little water as possible. Cooking with the lid off will greatly increase
energy consumption.
Use only flat-bottomed pots and pans.
DECLARATION OF CONFORMITY
This appliance meets the Ecodesign requirements of European
Regulation n. 66/2014, in compliance with the European standard
EN 60350‑2.
EN
INSTALLATION
•
•
•
•
•
•
•
•
•
The cooktop must be set into a worktop between 20 mm and 50 mm deep.
There must be nothing between the cooktop and the oven (cross rails, brackets, etc.).
The distance between the lower face of the glass ceramic hob and the cupboard or separating
panel must be at least 20 mm.
If the cooktop is to be installed next to a column unit, leave a distance of at least 100 mm from
min. 20 mm
the edge of the cooktop to the side of the column unit.
For built-in dimensions and installation see the picture in this paragraph.
A minimum distance must be maintained between the hob and the hood above it. Please refer to the
user manual of the hood for more informations.
Apply the supplied gasket to the cooktop (unless it has already been fitted), after having cleaned its surface.
Do not install the cooktop near a dishwasher or washing machine, so that the electronic circuits do not come into contact with steam
or moisture, which could damage them.
If an oven (from our range of ovens) is installed beneath the cooktop, make sure that it is equipped with a cooling system.If the temperature
of the electronic circuits exceeds the maximum permitted temperature, the cooktop will switch off automatically; in this case, wait for a few
minutes until the internal temperature of the electronic circuits reaches a tolerable level, at which point it will be possible to switch the hob on
again.
PLACING THE HOB
After the electrical connection (see the chapter “Electrical connection”).Position each fixing clips on the dedicated slots on the lateral sides of the
hob as shown in the picture. Then push the hob inside the cut out and check that the glass is flat and parallel to the worktop. The fixing clips are
designed for every type of worktop material (wood, marble, etc).
1
2
4x
DIMENSIONS AND DISTANCES TO BE MAINTAINED
i
L
Min. 40 cm
Min.10 cm
Min. 7 cm
42/46 mm
580 X 510 mm
580 mm
0
560 +2 mm
510 mm
Min. 70 mm
0
490 +2 mm
482 mm
552 mm
R = Min. 6,5 mm
Max. 8 mm
min 20 mm
ELECTRICAL CONNECTION
Electrical connection must be made before connecting the appliance to the electricity supply.
Installation must be carried out by qualified personnel who know the current safety and installation regulations. Specifically, installation must be
carried out in compliance with the regulations of the local electricity supply company.
Make sure the voltage specified on the data plate located on the bottom of the appliance is the same as that of the home.
Regulations require that the appliance be earthed: use conductors (including the earth conductor) of the appropriate size only.
CONNECTION TO THE TERMINAL BLOCK
For the electrical connection, use an H05RR-F cable as specified in the table below.
CONDUCTORS
AMOUNT x SIZE
220-240V ~ +
3 x 4 mm2
230-240V ~ +
3 x 4 mm2 (Australia only)
220-240V 3~ +
4 x 1,5 mm2
380-415V 3N~ +
5 x 1,5 mm2
380-425V 2N~ +
4 x 1,5 mm2
B
A
The appliance must be connected to the electricity supply by means of an all-pole disconnect switch with minimum contact gap of 3 mm.
ATTENTION: the power supply cable must be long enough to allow the cooktop to be removed from the worktop and must be positioned so as to
avoid damage or overheating caused by contact with the base.
NOTE: the yellow/green earth wire must be connected to the terminal with the symbol
and must be longer than the other wires.
• Remove approx. 70 mm of the cable sheath from the power supply cable (B).
• Strip approx. 10 mm of sheath from the wires. Then insert the power supply cable into the cable clamp and connect the wires to the terminal
block as indicated in the connection diagram placed close to the terminal block itself.
• Secure the power supply cable (B) by means of the cable clamp.
• Close the terminal board with the cover (A) securing it with the screw provided.
• After the electrical connection, fit the hob from the top and hook it to the support springs, according to the illustration.
PRODUCT DESCRIPTION
145 mm
120/165/210 mm
180 mm
145 mm
EN
CONTROL PANEL
Boiling
Dual/Triple zone
Zone selection controls and display
Melting
Power setting control
Timer controls
and display
Control On/Off
panel lock
FIRST TIME USE
After connecting the hob to the electrical power supply, the control panel
is locked. To unlock the control panel, touch the
control for 2 seconds.
The control panel lock indicator switches off and the hob can be used.
Read the “Control panel lock” paragraph for more details.
DAILY USE
SWITCHING THE HOB ON/OFF
To switch the hob on, touch the
control until the cooking zone
displays light up.
To switch off, touch the same control until the displays switch off. All the
cooking zones are deactivated.
If within 10 seconds of switching on, no function is selected, the hob
switches off automatically.
SWITCHING ON AND ADJUSTING COOKING ZONES
Power indicator display
Selected cooking zone indication
(the dot blinks when there is a Timer active on that zone)
Place the pot on the desired cooking zone and switch on the hob. Activate
the selected cooking zone by touching the corresponding “Zone selection
control”. “5” will appear on the display. Slide the finger over the “Power setting
control” to select the required power level, from min. 0 to max. 9. To confirm
the selection wait 10 seconds or touch again the same “Zone selection control”.
DEACTIVATION OF COOKING ZONES
To switch off the cooking zone, select the level “0” with the “Power setting
control”.
The cooking zone switches off and, if still hot, the letter “H” appears on
the zone display.
IMPORTANT:
• The dot blinking next to the power level display shows that the
Timer function is active on that zone.
• In case of more than one timer active, display shows the timer with
the shorter duration and corresponding indicator blinks.
RESIDUAL HEAT INDICATOR
If the display shows
, the cooking zone is still hot. If the residual
heat indicator of a given cooking zone is lit, that zone can be used, for
example, to keep a dish warm or to melt butter.
When the cooking zone cools down, the display goes off.
IMPORTANT: To avoid a permanent damage the hob:
• do not use pots with bottoms that are not flat;
• do not use metal pots with enamelled bottom;
• do not place hot pots/pans over the control panel.
SPECIAL FUNCTION
BUTTON
FUNCTION
NAME
1 or 2 LEDs
switch on:
Dual/Triple
zone
CONTROL PANEL LOCK
This function locks the controls to prevent accidental activation of the hob.
To activate the control panel lock, touch
control; an acoustic signal
sounds and a luminous indicator appears on the display. The control
panel is locked except for the switching off function.
To deactivate the control panel lock, repeat the activation procedure.
The presence of water, liquid spilled from pots or any objects resting on
the controls can accidentally activate or deactivate the control panel lock.
TIMER
The timer can be used to set the cooking time for a maximum of 99
minutes (1 hour and 39 minutes) for all the cooking zones.
Select the cooking zone to be used, touch the timer “–” or “+” controls
and a beep signals the function. The display shows “00”. The Timer value
can be decreased and increased by keeping the finger on the controls
“+” or “–”. After the Timer value selection, the display continue to blink
for 10 seconds before the countdown starts.
When the set time has elapsed, an acoustic signal sounds and the
cooking zone switches off automatically. To deactivate the timer, select
the cooking zone, touch the Timer controls “–” and “+” simultaneously.
VISUAL
INDICATION
DESCRIPTION
The control activates the double or triple
zone (if available). After positioning the
pot/accessory on the chosen cooking
zone, switch on the hob and select the
cooking zone. Select the power level and
touch the control one time to activate
the dual zone or two times to activate the
triple zone. To deactivate the function,
simply touch the same button. LEDs
near the zone display are switched on
only when the function is active for the
selected zone.
Boiling
This function sets the zone maximum
power (for example to quickly bring water
the boil). After positioning the pot/
Display shows: to
accessory on the chosen cooking zone,
switch on the hob, select the cooking
zone and touch the boiling controls. After
6 minutes of usage of this function, the
appliance automatically sets the zone to
level 9. To deactivate the function simply
touch the same control or lower the
power level with “–”. It is possible to use
this function in combination with dual/
triple zone function.
Melting
This function sets a power level that
Display shows: is suitable for slowly melting delicate
products without compromising their
sensory quality (chocolate, butter, etc.).
After positioning the pot/accessory on
the chosen cooking zone, switch on
the hob, select the cooking zone and
touch the power setting control over
the melting icon. The function melting
corresponds to power level “2”.
The hob is also equipped with the “auto shut off” function that switch off
the cooking zone if no power level modification is done after a specific
time frame depending on the power setting itself. In the table there is
the time duration of each power level.
POWER LEVEL
AUTO SHUT OFF TIME
1
2
3
4
5
6
7
8
9
10 hours
5 hours
5 hours
4 hours
3 hours
2 hours
2 hours
2 hours
1 hour
POWER LEVEL TABLE
POWER LEVEL
Maximum
power
Boiling
9–7
High power
7–5
Medium power
4–3
Low power
2–1
TYPE OF COOKING
LEVEL USE
(indicating cooking experience and habits)
Fast heating
Ideal for rapidly increasing the temperature of food to fast boiling in the
case of water or rapidly heating cooking liquids.
Frying – boiling
Ideal for browning, starting to cook, frying frozen products, fast boiling.
Browning – slow frying – boiling –
grilling
Ideal for slow frying, maintaining a high boil, cooking and grilling (short
duration, 5-10 minutes).
Browning – cooking – stewing – slow Ideal for slow frying, maintaining a low boil, cooking and grilling
frying – grilling
(medium duration, 10-20 minutes), preheating.
Cooking – stewing – slow frying –
grilling
Cooking – simmering – thickening –
creaming pasta
Melting – defrosting – keeping
food hot – creaming risottos
Ideal for stewing, maintaining a gentle boil, cooking and grilling (long
duration).
Ideal for prolonged cooking (rice, sauces, roasts, fish) with liquids (e.g.
water, wine, broth, milk), creaming pasta.
Ideal for prolonged cooking (volumes of less than a litre: rice, sauces,
roasts, fish) with liquids (e.g. water, wine, broth, milk).
Ideal for softening butter, gently melting chocolate, thawing small
products and keeping just-cooked food hot (e.g. sauces, soups,
minestrone).
Ideal for keeping just-cooked food hot, creaming risottos and keeping
serving dishes warm (with induction-suitable accessory).
MAINTENANCE AND CLEANING
Disconnect the appliance from the power supply.
•
•
•
•
Do not use steam cleaning equipment.
Do not use abrasive sponges or scouring pads as they may damage
the glass.
After each use, clean the hob (when it is cool) to remove any deposits
and stains from food residue.
Sugar or foods with a high sugar content can damage the hob and
must be immediately removed.
•
•
•
•
Salt, sugar and sand could scratch the glass surface.
Use a soft cloth, absorbent kitchen paper or a specific hob cleaner
(follow the Manufacturer’s instructions).
Spills of liquid in the cooking zones can cause the pots to move or
vibrate.
After cleaning the hob, dry thoroughly.
EN
TROUBLESHOOTING
If the hob will not operate correctly, before calling the After-Sales Service,
refer to the Troubleshooting Guide to determine the problem.
•
•
•
•
If after the above checks the fault still occurs, get in touch with the nearest
After Sales Service.
Read and follow the instructions given in the section “Daily use”.
Consult the table below for instructions.
FAILURE DESCRIPTION
Check that the electricity supply has not been shut off.
Dry the hob thoroughly after cleaning it.
POSSIBLE CAUSES
The hob does not switch on.
MEASURE
Missing power supply.
Check that power supply is on.
Wrong connection of the
main cable.
Call a qualified technician to check the cable connection.
Hob failure.
Call after sales service.
The hob switch on but "F" alternately to “L” is shown Strong light over the hob
on each display.
during start up.
Reduce light over the control panel, restart the hob
(disconnect and reconnect to the power supply).
The hob switch on but "F" alternately to one of "0, A, C,
Hob failure.
E, t, H, J, U, 5, 3, 4, r" symbol is shown on the displays.
Restart the hob (disconnect and reconnect to the power
supply), if the problem persists call after sales service.
Heater does not heat up but the display is on.
Hob failure.
Call after sales service.
The hob plays 3 acoustic signals and then shut off.
One or more buttons are
continuously pressed for
more than 3 seconds.
Remove any object or liquid that is placed over the control
panel.
Not possible to switch the hob off.
Hob failure.
Disconnect the hob from power supply and call After sales
service.
The heater is not continuously on, it switches on and
Normal functioning of the
off cyclically even if on the display the power lever
hob.
does not change.
The on/off cycle allows the power regulation of the
heater and is completely normal. In some cases a thermal
protection could switch off the heater for some time to
avoid the glass damage. Examples of such cases are:
cooking long time at high power level, usage of pots
smaller than the heating element, pot bottoms not flat.
The hob switch on but "F" alternately to "c" is shown
Control panel overheating.
on the displays.
Wait until control panel temperature cool down. The hob
will automatically switch on when the temperature drops
below operating limit.
AFTER-SALES SERVICE
In order to receive a more complete assistance, please register your
product on www‌.‌hotpoint.eu/register.
•
the service number (number after the word Service on the rating
plate). The service number is also indicated on the guarantee
booklet;
•
•
your full address;
your telephone number.
BEFORE CALLING THE AFTER-SALES SERVICE:
1. See if you can solve the problem by yourself with the help of the
suggestions given in the TROUBLESHOOTING.
2. Switch the appliance off and back on again to see if the fault persists.
IF AFTER THE ABOVE CHECKS THE FAULT STILL OCCURS, GET IN
TOUCH WITH THE NEAREST AFTER-SALES SERVICE.
To receive assistance, call the number shown on the warranty booklet or
follow the instructions on the website www‌.‌hotpoint‌.‌eu.
When contacting our Client After sales service, always specify:
• a brief description of the fault;
• the type and exact model of the appliance;
Type: XXX
Mod.: XXX
XXXXXXXXXXXXXXXXXXXX
Made in X
XXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXXXXXXX
01
XXXX XXX XXXXX
If any repairs are required, please contact an authorized after-sales
service (to guarantee that original spare parts will be used and repairs
carried out correctly).
XX XXXX XXXXX
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
400011345571
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising