Indesit | ST CU 8BX GCC | Setup and user guide | Indesit ST CU 8BS GCC Setup and user guide

Indesit ST CU 8BS GCC Setup and user guide
EN
Quick guide
THANK YOU FOR BUYING A WHIRLPOOL PRODUCT.
In order to receive a more complete assistance,
please register your product on
www.whirlpool.eu/register
Before using the appliance carefully read the Safety Instructions.
CONTROL PANEL
ON/OFF button (Reset if long pressed)
Programme button
Programme selection Knob (rotate to
select / press to confirm)
4 Start/Pause button
5 Programmes area
6 Display
Options Buttons
7 Settings
8 Fresh Care+
9 Keys Locked
10 Start Delay
11 Drying Time
12 Drying Level
13 Cycle Options
1
2
3
6.
COTTON
2:20
5.
3.
1.
2.
7.
FIRST TIME USE
When starting the appliance for the first time, the control panel
will show the set language menu automatically. Turn the knob
to visualize the languages available in the machine. Press the
knob to confirm the selected languages.
Make sure that the water tank is correctly inserted. Make sure
that the drain hose on the back of the dryer is fixed correctly,
either to the dryer’s water tank, or to your domestic sewage
system. Should you wish to change the opening side of the
door, please contact our After-sales Service. (See phone number
in the warranty booklet).
8.
9.
10.
11.
12
13.
4.
Refer to Troubleshooting section.
In case of power failure, it is necessary to press the button Start/
Pause to restart the cycle.
Ecomonitor
This indicator shows the energy consumption level according to
the programme and the options set. The consumption is
proportional to the lines on the display,by the ecomonitor icon.
Drum light (If present)
Some models are equipped with drum internal light to make use of the
dryer easier. No setting is required. For instance, the light goes on when
opening the door.
NAVIGATION (FUNCTIONS SELECTION)
OPENING OF THE DOOR DURING THE CYCLE
The navigation can be made when the LED of the required
function is on. Browse the function by rotating the knob to
visualise the possible selections on the display.
Press the knob to confirm.
The machine proposes a path for selecting programmes and
options, with starting in sequence of the functions LEDs.
However, the programmes and options can be selected
autonomously by simply pressing the programmes button or
the required option.
During operation, it is possible to open the door. After having closed
it, press the button Start/Pause again to restart the dryer.
DAILY USE
SETTINGS
The various settings can be selected with the modes described in
"Navigation".
Language shows the languages available on display.
Keys Tone allows adjusting or removing the setting sounds of the
machine keys.
Cycle End Alert allows adjusting or removing the cycle end sounds
of the machine.
Display Contrast allows adjusting the display brightness
Remember last used cycle selects the last used cycle automatically
when starting the machine, otherwise it restarts from the default
programme.
Eco Mode allows adjusting the machine switching off after the cycle
end.
Factory Settings allows resetting the factory settings.
Doing this will keep your machine working at its BEST!
Remember to empty your water tank after each drying cycle.
Remember to clean your filters after each drying cycle. (Refer
to section Care & Maintanence).
1. Open the door and load garments. Always refer to instructions
on clothing labels and the max loads indicated in the programme
section. Empty pockets. Make sure garments do not get caught
between the door and/or the door filter.
2. Close the door.
3. Press the button On/Off.
4. Select the required programme according to the type of laundry.
The LED of the button P must remain on. Rotate the knob to
select the required value and then press the knob to confirm.
5. Select the options, if necessary. If the options have any
submenus, they can be browsed by rotating the knob and
then confirmed by pressing the knob.
*MAX LOAD 8 Kg (Dry load)
6. To start the cycle, press the Start/Pause button.
7. At the end of the drying cycle, a buzzer will beep. The display
download
Instructions,
User Manual, Product Fiche and Energy data by:
signals the end ofYou
thecan
cycle.
Pullingthe
outSafety
the load
immediately
xxxx
CARE LABEL
Visiting
our website
- docs.whirlpool.eu
helps to prevent •the
formation
of creases
on laundry.
Always check the care labels, especially when placing garments in
Using
QR Code the button On/Off, open the
8. Turn the machine• off
by pressing
the tumble
the firstbooklet).
time. Below
• Alternatively,
our
Service
numberdryer
in thefor
warranty
When are the most commonly
door and pull clothing
out. If thecontact
machine
is After-sales
not switched
off (See phone
usedprovided
symbols:
contacting
our
Service,
pleaseend,
state
the codes
on your product’s identification plate.
manually, after about
a quarter
ofAfter-sales
an hour from
the cycle
the
appliance turns off automatically to save energy.
May be tumble dried.
If this last stage is not carried out immediately, some machines
Do not tumble dry.
and/or some programmes/options are equipped with Crease Care
system. For some hours, after the end of drying, the drum rotates at
Tumble dry – high heat.
regular intervals to prevent the formation of creases.
Tumble dry – low heat.
xxxxxxxxxxxx
The duration of these programs will depend on the size of
the load, types of textiles, the spin speed used in your washer
and any extra options selected. In machines equipped with
display, the duration of the cycles is shown on the control
panel. The remaining time is constantly checked and adjusted
during the drying cycle to show the best possible estimate.
P
PROGRAMS
Eco Cotton
kg Max*
Standard cotton programme, suitable to dry normally wet
cotton laundry. Most efficient programme in terms of energy
consumption for drying cotton laundry. The values on the Energy
Label are based on this programme.
Cotton kg Max*
For drying cotton laundry.
Mixed
kg 4
This programme is ideal for drying cotton and synthetic
fabrics together.
Synthetics
kg 4
For drying laundry made of synthetic fibres.
Delicates
kg 2
For drying delicate laundry which needs gentle treatment.
Wool kg 1
Programme for drying wool clothing. It is advisable to turn
the garments inside out before drying. Leave to dry naturally the
heaviest edges that are still damp.
Coloured
kg Max*
Programme for gentle drying suitable for coloured garments.
Rapid 30'
kg 0,5
Ideal for drying cotton garments spun at high speed in the
washing machine.
Shirts
kg 3
This is a programme for Shirts made from cotton or cotton
blend/synthetics.
Easy Ironing
This cycle allows to extend the fibres of garments thus
making ironing and folding easier. Do not use in case of
garments that are still wet. Suitable for small loads of cotton
textiles or cotton blends.
Refresh
A short programme suitable for refreshing fibres and
garments by means of fresh air. Do not use with garments that are
still wet. It can be used on with any load size but is more effective
with small loads. The cycle duration is about 20 minutes.
Specials
To set one of the following programmes, use the knob for
selecting and confirming the position of the "Special Programs".
The programmes list is accessed by rotating the knob. The
display shows the names of the available programmes. Confirm
the required programme by pressing the knob.
• Jeanskg 3
For drying cotton jeans-wear and garments made of robust
cotton, like denim, such as trousers and jackets.
• Miniload kg 1
Economic drying of small laundry loads.
• Sport kg 4
For drying sports garments made of synthetics or cotton.
• Silkkg 0,5
Gentle drying of silk garments.
OPTIONS BUTTONS
These buttons serves to personalise the selected programme
according to personal requirements. Not all options are available
for all programmes. Some options are incompatible with the
ones previously set. The buzzer and/or blinking indicators
will signal the incompatibility. If the option is available, the
option indicator will stay on. Some options may be kept in the
memory of the programme if selected in the previous drying.
Some options may be kept in the memory of the programme if
selected in the previous drying of the same programme.
• Downjackets
kg 2,5
To dry down jackets, giving their natural softness back (2
jackets).
OPTIONS
After selecting the programme, the various options can be
set, if necessary.
Drying Level
Each programme has a pre-set drying level. In some
programmes, the residual moisture on garments can be set.
Pressing the related option button, the LED goes on. Turn the
knob to browse among the levels available for each programme.
Press the knob to confirm.
Iron Dry: a very delicate ironing. Suitable for making ironing
of garments easier immediately after the end of the cycle.
Hanger Dry: a level intended for delicate garments ready to
be hanged.
Cupboard Dry: the garments are ready to be folded and put
away
Extra Dry: used for garments to be worn at the end of the
cycle.
Drying Time
In some programmes, the drying time can be set. Pressing
the related option button, the LED goes on. Turn the knob to
visualize the times available for each programme. Press the knob
to confirm.
Start Delay
h
Pressing the related option button, the LED goes on. Turn the
knob to browse among the times available for each programme.
Press the knob to confirm.
In case of door opening, after closing, it is necessary to press the
button Start/Pause again.
Fresh Care+
If garments are left inside the drum after the end of the
cycle, they are subject to bacterial proliferation. This option allows
to prevent this proliferation by controlling the temperature and
the rotation of the drum. This treatment has a max. duration of 6
hours after the end of the programme set. This option remains in
memory if selected in the previous drying.
If this option is used together with the Start Delay, a crease treatment
(a periodic rotation of the drum) is added in the Start Delay phase.
Keys Locked
This option makes all machine controls inaccesible, except
the button On/Off.
When the machine is on:
• to activate the option, keep the button pressed until the
indicator goes on.
• To disable the option, keep the button pressed until the
indicator goes off.
This option remains in memory if selected in the previous drying.
Cycle Options
This buttons serves to access a menu of available options (see
next options). After having pressed the button, turn the knob
to select the option and press it to confirm.
•
Rapid
Enables quicker drying.
•
Gentle
Enables a more gentle treatment of the laundry by
reducing the drying temperature.
•
Cycle end signal
This option activates a prolonged buzzer at the end of the
cycle. Enable it if you are not sure to hear the normal sound at the
end of the cycle.
This option remains in memory, if selected in the previous drying.
EN
Quick guide
THANK YOU FOR BUYING A INDESIT PRODUCT.
CARE AND
In orderMANTENANCE
to receive a more complete assistance,
TRANSPORT AND HANDLING
Before
using
carefully
read
the Safety Instructions.
registerduring
your product
on
Never
liftthe
the appliance
dryer by holding
it at the
worktop.
Unplugplease
the dryer
the cleaning
and maintenance
www.indesit.eu/register
procedures.
1. Unplug the dryer.
2. Make sure that door and water tank are properly closed.
Emptying the water tank after each cycle (see Fig. A).
3. If the drain hose is connected to your sewage system, fix the
Pull the container out of the dryer and and empty it into a
sink or other suitable drain, then place it back. Do not use the dryer drain hose on the rear of the dryer again (see Installation Guide).
without having inserted the container back in place.
Cleaning the door filter after each cycle (see Fig. B).
Power consumption
Pull the filter out and clean it by removing the lint from the
filter surface under running water or using a vacuum cleaner. For
off-mode (Po) - Watts
0.50
optimal performance, dry up all the filters before inserting them
left-on
mode
(Pl)
Watts
1.00
back in place. Do not use the dryer without having reinserted the
filter in place.
Programs
Kg
kWh
Minutes
Remove the door filter as described below:
8
4.74
130
1. Open the door and pull upwards.
Eco Cotton*
2. Open the filter and remove lint from all its parts. Replace it
4
2.59
80
Eco Cotton
correctly. Ensure it is completely inserted flush with the dryer seal.
Cleaning the bottom filter when the relevant indicator
Synthetics
4
1.83
90
turns on (see Fig. C).
* This is the reference programme for the energy label and suitable
Pull the filter out and remove the lint from its surface by washing
to dry normal wet cotton laundry. This is the most efficient
it under runing water or by using a vacuum cleaner.
programme in terms of energy consumption for drying wet cotton
However, it is advisable to clean this filter after each cycle to
laundry. (Standard/Default starting configuration).
optimise drying performance. Do not use the dryer without having
inserted the filter in place first.
Remove the bottom filter and the condenser as described
below:
1. Open the bottom door.
2. Take the handle and pull the bottom filter out.
3. Open the rear side of the filter and remove the lint from the
inner surface of the mesh.
4. Clean the bottom filter chamber (there might be residual
water: this is normal).
5a. Approximately every 3 months, clean the condensing unit
(figure D) situated behind the bottom filter.
5b. Lower the levers situated on the sides of the condenser. After
having removed the condenser, clean it under running water.
5c. Place the condenser back in place and lift the levers.
6. Close the rear side of the bottom filter and place it back by
checking it is perfectly integrated in place.
7. Lower the filter handle and close the bottom door.
8. Make sure the air intake is free.
The filters are essential parts for drying. They are intended
to collect the lint formed during drying process. In case
of clogged filters, the air flow inside the dryer would be
seriously affected: the drying times would be longer, the
energy consumption would increase and the dryer could be
damaged. If these procedures are not carried out properly,
the dryer may not start.
PRODUCT DESCRIPTION
1.
2.
3.
4.
A
Water tank
Air Intake
Bottom filter and condenser
Door filter
1
C
B
D
You can download the Safety Instructions, User Manual, Product Fiche and Energy data by:
• Visiting our website - docs.indesit.eu
• Using QR Code
• Alternatively, contact
our After-sales Service (See phone number in the warranty booklet). When
4
2
contacting our After-sales Service, please state the codes provided on your product’s identification plate.
3
xxxx
xxxxxxxxxxxx
EN
Quick guide
THANK YOU FOR BUYING A WHIRLPOOL PRODUCT.
In order to receive a more complete assistance,
TROUBLESHOOTING
Before using the appliance carefully read the Safety Instructions.
please register your product on
Before contacting
the Service Centre, refer to the table below. Often the malfunctions are minor and can be solved in few minutes
www.whirlpool.eu/register
Malfunction
The tumble
dryer does not
turn on.
The tumble
dryer does not
start
The drying
times are very
long
Possible cause
The plug is not inserted into the socket.
Solution
Insert the plug into the socket.
The plug is faulty.
Try to plug another appliance in the same socket. Do not use
connecting electrical devices to the socket, as adapters or extensions
A power failure occurred.
Await the reactivation of the power supply.
The door is open.
Close the door.
For machines equipped with this function: await the end of the delay
set or switch the machine off to reset it. Refer to the section Options.
A time delay for the cycle start was set.
The button Start/Pause was not pressed to start Press the button Start/Pause.
the program.
The function Key Lock was enabled (in case of
machines equipped with this option).
Refer to the option section and, if the Key Lock is present, disable it.
Switching the machine off is not enough to disable this option.
An appropriate maintenance was not carried
out.
The programme, the time and/or the drying
level set are not suitable for the type and the
amount of load inserted into the dryer.
Refer to the section Care & Maintenance and perform the operations
described.
The garments are too wet.
Carry out a washing cycle with higher spin speed to remove as much
water as possible.
Refer to the programme section to check the max. load for each
programme.
In case of power failure, it is necessary to press the button Start/Pause
to restart the cycle.
The dryer may be overloaded.
The programme A power failure occurred might have occurred.
did not end.
Refer to the section programmes and options to find the programme
and the options most suitable for the type of load.
Lights on or flashing
Water tank
The water tank is full.
Emtpy the water tank. Refer to the section Care & Maintenance.
Door filter
and/or bottom
filter*
Failure of the air flow necessary for machine
operation.
Clean the door filter and the bottom one and check whether air
intake is free. Carrying out these operations improperly may cause
damages.
Bottom filter*
The bottom filter requires cleaning.
Clean the bottom filter. Refer to section Care & Maintanence.
The display
shows "Fault FX The machine sensors detected a failure.
EX"
DEMO
The cycle lasts
few minutes.
The dryer is in DEMO mode. (enter demo)
Switch the dryer off and unplug it. Open the door immediately and
pull laundry out, to allow the heat to dissipate. Wait for about 15
minutes. Reconnect the dryer to the power supply, load the laundry
and restart the drying cycle. If the problem still occurs, contact
the After-Sales Service Centre and communicate the letters and
digits flashing on the display.
For instance: F3 and E2
Disable the Demo mode. The following actions must be carried out
in sequence, without breaks. Switch the machine on and then switch
it off again. Press the buttons No. 2 and 13 (see first page) until the
buzzer is heard.
Switch the machine on again. Exit from demo mode is signalled.
*Note: some models are self-cleaning and not equipped with bottom filter. Please refer to the section Care & Maintenance.
You can download the Safety Instructions, User Manual, Product Fiche and Energy data by:
• Visiting our website - docs.whirlpool.eu
• Using QR Code
• Alternatively, contact our After-sales Service (See phone number in the warranty booklet). When
contacting our After-sales Service, please state the codes provided on your product’s identification plate.
xxxx
xxxxxxxxxxxx
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising