Whirlpool | AWOE 9212 ECO/-30 | Instruction for Use | Whirlpool AWOE 9212 ECO/-30 Instruction for Use

Whirlpool AWOE 9212 ECO/-30 Instruction for Use
30106422GB.fm Page 1 Wednesday, August 11, 2010 5:31 PM
GB
PROGRAMME CHART
1. Programme selector
2. “Temperature” button
3. “Spin” button
Programme sequence indication
8
“Soil level” indications
“Start delay” indication
with “Rinse hold”
“Child lock” indication
1
4. “Start delay” button
“Detergent overdosage” indication
5. “Soil level” button
7
6. “Dosing aid” button
2
“Detergent calibration” indication
7. “Start (Pause)” button
5
8. “Reset/Drain” button
Programme
Temperature
Care
Labels
Max.
Load
Eco
Colours
Fabrics
kg
❉
:
1)
“Dosing aid” indication
3
Type of wash/Notes
64
Red failure indications
(depending on the model)
Detergents and additives
PreMain Softener
wash wash
Selectable options
Dosing Start
aid
delay
Pre- Eco
Soil
Easy
Intensive Tumble
wash
level
ironing
rinse
fresh
PreEco Livello
Stiro
Risciacquo Rinfresca EcoDose Avvio
lavaggio
di sporco
facile
intensivo a fine ciclo Detersivo ritardato
- Respect the manufacturer’s recommendations on the care label
Spin
Spin
Centrifuga
variabile
Max.
Spin
Speed
/
rpm
❉
❉
max.
Mixed
Misti XL
20 - 60
Slightly to normally soiled robust laundry made of cotton, linen, artificial fibres
their blends.
6.0 and
Effective one-hour programme. Make sure to wash only similar colours together in
one wash load. If soil level requires, add oxygen-based stain removers.
Cotton
Cotone
20 - 95
to heavily soiled towels, underwear, table and bed linen etc. made of
9.0 Normally
cotton and linen.
❉
Yes
❉
❉
❉
❉
❉
❉
❉
❉
❉
❉
max.
Synthetics
Sintetici
20 - 60
soiled blouses, shirts, overalls, etc. made of polyester (Diolen,
3.5 Normally
Trevira), polyamide (Perlon, Nylon) or blends with cotton.
❉
Yes
❉
❉
❉
❉
❉
❉
❉
❉
❉
❉
max.
Delicates
Delicati
20 - 40
2.5 Curtains and delicate clothing, dresses, skirts, shirts and blouses.
❉
Yes
❉
❉ — ❉
—
—
❉
❉
❉
❉
1000 1)
—
Yes
❉
— — ❉
—
—
❉
❉
❉
❉
1000 1)
—
Yes
❉
— — ❉
❉
❉
❉
❉
❉
❉
max.
❉
Yes
❉
❉ — ❉
—
—
❉
❉
❉
❉
1000 1)
❉
Yes
❉
❉ — ❉
—
❉
❉
❉
❉
❉
1000 1)
—
Yes
❉
— — ❉
—
❉
❉
❉
❉
❉
max.
—
Yes
—
— — —
—
—
❉
❉
❉
❉
max.
—
Yes
❉
— — —
—
—
❉
❉
❉
❉
max.
❉
Yes
❉
❉ — ❉
—
❉
❉
❉
❉
❉
1000 1)
— —
—
— — —
—
—
❉
—
❉
❉
max.
— —
❉
— — —
—
❉
❉
—
❉
❉
max.
Wool/
Handwash
Lana/
a mano
20 - 40
2.0
White
Bianchi
20 - 60
9.0
Light colours
Colori Chiari
20 - 60
6.0
Dark
Colori Scuri/
Nero
20 - 60
6.0
SuperEco
SuperEco
20 - 60
9.0
AquaEco
AquaEco
20 - 40
3.0
Speed 15
Rapido 15’
20 - 30
3.0
Big Items
Piumone/Trapunta
20 - 60
3.0
Spin
Centrifuga
—
—
9.0
Rinse & Spin
Risciacquo &
Centrifuga
—
—
9.0
optional / Yes : dosing required
For improved garment care, spin speed is restricted in these programmes.
Black process 45.0° 150.0 LPI
Woollens, labelled with the Woolmark and identified as machine washable, as
well as textiles made of silk, linen, wool and viscose marked as handwashable.
This programme is tested and approved by The Woolmark Company for machineand handwashable wool. Select spin speed according to the manufacturer's
recommendations on the care label.
Normally to heavily soiled and robust white cotton laundry.
Save energy by selecting a lower wash temperature and adding an oxygen-based
bleach product, in addition to your detergent.
White and pastel shaded garments made of delicate fabrics.
Gentle wash programme to avoid graying or yellowing of your laundry. Use heavy
duty detergent, if necessary also stain removers or bleaches on oxygen basis. Do not
use liquid detergent.
Black and dark garments made of cotton, cotton blends and polyester.
Special programme to reduce colour fading and local discolouration. Prefer to use a
special liquid detergent for dark garments with this programme.
Normally to heavily soiled and robust underwear, table and bed linen,
towels and shirts made of cotton and linen.
Offers highest economy in energy consumption by prolonged washing duration. Ideal to
be run overnight to additionally profit from the more favourable energy rates. To avoid
noise of spinning at night, set spin speed to “0” and start spin programme in the morning,
or define programme start with “Start delay” accordingly.
Lightly soiled laundry made of synthetic fibres, or synthetics mixed with
cotton garments.
Saving programme with a very low water consumption. Use liquid detergent and the
lowest recommended amount for 3kg laundry. Do not use softener.
Briefly worn clothing made of cotton, artificial fibers and blends with cotton.
Refresh programme. Use lowest recommended detergent amount.
Blankets made of synthetic fibres; bedcovers filled with feathers, polyester
or other artificial fibres; sleeping bags, bathmats and similar items.
Intensive spin programme.
Same as the spin cycle in the “Cotton” programme.
Rinse and intensive spin programme.
Same as the last rinse and the final spin in the “Cotton” programme.
—
Yes
❉
— — ❉
❉
❉
❉
❉
The wool/handwash cycle of this machine has been tested and approved by The Woolmark Company for the washing of
Woolmark garments labelled as “machine wash” or “hand wash” provided that the garments are washed according to the
instructions on the garment label and those issued in this programme chart. M0702
Whirlpool is a registered trademark of Whirlpool USA
5019 301 06422
30106422GB.fm Page 2 Wednesday, August 11, 2010 5:31 PM
The Sensor Technology automatically adapts Programme Time, Water and Energy consumption to the size of your wash load.
CONSUMPTION DATA
Programme
Mixed
Cotton
Cotton
Cotton with “Eco”***
Cotton
Synthetics
Synthetics
Delicates
Wool/Handwash
White
Light colours
Dark
SuperEco
AquaEco
Speed 15
Big Items
SET A START DELAY
Temperature
(°C)
40
95
60
60
40
60
40
30
40
40
40
40
60
40
30
40
Load
(kg)
6.0
9.0
9.0
9.0
9.0
3.5
3.5
2.5
2.0
9.0
6.0
6.0
9.0
3.0
3.0
3.0
Water
(l)
73
87**
64
64
82
46**
42
60
45
82
70
49
80
19
30
74
Energy
(kWh)
0.60
2.60
1.53
1.17
0.80
0.85
0.50
0.40
0.60
0.90
0.50
0.60
1.08
0.45
0.20
0.75
Approx. Programme Duration
(hours : minutes)*
1:00
2:20
2:30
4:00
2:15
1:35
1:20
0:45
0:40
2:30
1:20
1:40
4:00
1:00
0:15
1:30
Consumption values were measured in normalized conditions in compliance with Standard IEC/EN 60 456. Consumption data in the home may vary with respect
to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash.
*
The time indicated on the display can deviate from the values in the table, because it takes into account the operation conditions applicable at that time.
**
To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out.
***
Reference Programme for Energy Label.
ADD DETERGENTS, CLOSE THE DOOR
AND SELECT THE PROGRAMME
Add detergent as indicated on the front page and as described in
the chapter “Detergent and Additives” in your Instructions for Use.
Turn the programme selector to the desired programme; the light
of the “Start (Pause)” button
blinks. The temperature and
spin speed indicated on the display can be altered by pressing the
“Temperature” button
or the “Spin” button
.
SELECT ANY DESIRED OPTION
When the combination of programme and additional option(s) is
not possible, the indication lights switch off automatically.
Unsuitable combinations of options are deselected automatically.
For certain programmes, an option may already be preset; if you
want you can deselect it.
“Prewash” button
• Only for heavily soiled loads (for example sand, granular dirt).
Increases the cycle time by approximately 15 min.
• Do not use liquid detergent for the main wash when activating
the “Prewash” option.
“Eco” button
• With a modified temperature profile and a prolonged washing
duration, the optimum combination of good washing result and
lower energy consumption is achieved.
“Soil level” button
• Adapts the programme duration to the soil level of your
laundry. Also influences the detergent quantity
recommendation when using the “Dosing Aid” button.
= lightly soiled = normally soiled = heavily soiled
Not all soil levels are selectable for each programme.
“Easy ironing” button
• Reduces creasing by an increased water quantity and a very
gentle spin.
“Intensive rinse” button
• More water is added and rinse cycle is prolonged.
• This option is particularly suitable for areas with very soft water or
for washing baby linen, and helps people with allergies.
“Tumble fresh”
• Select this option if you cannot unload the laundry soon after
programme end, or if you tend to forget the laundry in your
washing machine; it will help to keep your laundry fresh.
• The washing machine will start to tumble the laundry
periodically about one hour after programme end.
• The light of the “Tumble fresh” button will blink while this
function is active, and the display will show “0:01” with
blinking colon.
• The periodic tumbling will last up to approximately 12 hours
after the end of your wash programme, and you can stop it at
any time by pressing the “Tumble fresh” button; it will last a
while until you can open the door.
• After the “tumble fresh” period has run out, the display
indicates “End”.
“Spin” button
(incl. “Rinse hold”
)
• Every programme has a predefined spin speed.
• Press the button to set another spin speed.
• If spin speed “0” is selected, the final spinning is cancelled but
intermediate spin peaks remain during rinse. The water is
drained out only.
• If you select “Rinse hold”
, the laundry remains in the last
rinse water without progressing to the final spin cycle, to avoid
creasing and prevent colours from changing. To activate the
“Rinse hold”, press the “Spin” button repeatedly until the “Rinse
hold” symbol
on the display lights up.
- The wash programme stops to “Rinse hold” when the
“Rinse hold” symbol
on the display blinks; the light of
“Start (Pause)” button blinks as well.
- To terminate the “Rinse hold” by draining the water,
without any spinning, press the “Start (Pause)” button.
- To terminate the “Rinse hold” by spinning the laundry, press
the “Spin” button to select the desired spin speed and then
“Start (Pause)” to start the spin cycle.
- Do not leave the laundry to soak for too long in the “Rinse hold”.
The “Start delay”
allows to run the machine at the consumer’s
convenience, for example at night when electricity is cheaper.
• Select programme, temperature, spin speed and options.
• Press the Start delay button to select one of the delay time
steps between 0:30 and 23:00 hours.
• Press the “Start (Pause)” button
.
The countdown of the delay time begins; the clock symbol next to
the delay time and the colon between hours and minutes blink.
• The time delay indication disappears when the programme
starts and it is replaced by the remaining programme time.
• If you use the “Dosing Aid” button: select the delay time
BEFORE pressing the “Dosing Aid” button. The countdown
of the selected delay time begins after having pressed the
for the second time (see
“Start (Pause)” button
separate Instructions for Use concerning the “Dosing Aid”).
To cancel the “Start delay”
...before you press the “Start (Pause)” button:
• Press the “Reset/Drain” button
, or set the start delay
time to “0:00” - the delay time disappears after a few seconds.
...after having started the programme:
- Press the “Start (Pause)” button
- the delay time
disappears from the display. Press “Start (Pause)” again to
start the selected programme immediately.
DETERGENT DOSING
RECOMMENDATION
With the “Dosing Aid” button, you can make your washing machine
indicate you the recommended detergent quantity for your wash
load, depending on the soil level selected and the size of the load.
• Helps to save detergent and protect the environment and also
sensitive skin by avoiding detergent overdosing.
• Before you use this function, you must adapt the washing
machine to the dosing amounts which are recommended for
the detergents you use. Also check if your region’s water
hardness corresponds with the water hardness level “soft” of
your washing machine - if not adapt it.
• Select programme, options and start delay BEFORE using the
“Dosing Aid” button.
For any details, refer to the separate “Dosing Aid” Instructions for Use.
“DOOR OPEN” INDICATION
Before starting a programme, the symbol lights to show that the
door can be opened to add more washing. As soon as you press
“Start (Pause)”, the “Door open” indication goes off and the
door will lock until the end of the programme. Do not try to open
it by force; if you have to open it urgently during a running
programme, refer to “Reset a running programme before the end”.
If you try to start a wash programme and the door is not properly
closed, the “Door open” indication will blink.
PROGRAMME START
Open the tap and press the “Start (Pause)” button
; the
blinking “Start (Pause)” button light becomes constant. The
“Door open” indication goes off, and the wash symbol
lights
to indicate that the programme is in process. In some phases, the
remaining programme time is newly calculated - if this is the case,
on the display will fade, and the
the “6th sense” indication
remaining programme time is replaced by an animation.
CHILD LOCK
Activating the child lock prevents children from starting a wash
cycle or changing the settings of a running programme. The child
lock cannot be activated or deactivated when the programme
selector is in the “Off/O” position. To activate the child lock:
• Turn the programme selector to a programme position, or run
a programme as usual.
• Press the “Temperature”
and the “Spin”
button
simultaneously for a few seconds. The “Child lock” symbol
will shortly blink and then light up to indicate that the
child lock is active.
The programme setting cannot be changed anymore; the only change
possible is to switch the washer off by turning the programme selector
to the “Off/O” position. To deactivate the child lock, proceed in the
same way as for activating it.
RED FAILURE INDICATIONS
If one of the red failure indications on the display lights up, refer to
the “Troubleshooting Guide” in your “Instructions for Use”.
PROGRAMME END
• The display shows “End”, and the “Programme finished”
indication
lights up.
1. Turn the programme selector to the “Off/O” position.
2. Close the water tap.
3. Open the door and unload the machine.
• Leave the door ajar to allow the drum to dry.
• If you do not turn the programme selector to the “Off/O”
position, all lights of the control panel go out after a few
minutes to save energy - only “End” will remain on the display.
DETERGENT OVERDOSAGE INDICATION
The symbol will light up at the end of the programme if you used
too much detergent. Use less detergent next time. If the symbol
lights up and the display shows “Fod”, too much foam interrupted
the wash process; refer to the “Troubleshooting Guide” in your
Instructions for Use.
CHANGE PROGRAMME AND/OR OPTIONS
AFTER PROGRAMME START
1.
2.
3.
Press the “Start (Pause)” button
to pause the
programme. The light blinks.
Select the new programme, temperature, any options and
another spin speed if you want.
Press the “Start (Pause)” button
again. The new
programme continues at the same position where the
previous programme was interrupted. Do not add detergent
for this programme.
RESET A RUNNING PROGRAMME BEFORE
THE END
The “Reset/Drain” button
cancels a programme before the end.
• Press and hold the “Reset/Drain” button
for a few
seconds; an animation appears on the display. The water is
drained out; it may last some time until you can open the door.
Whirlpool is a registered trademark of Whirlpool USA
5019 301 06422
Black process 45.0° 150.0 LPI
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising