Indesit | DFCX80116 | Setup and user guide | Indesit DFCX80116 Setup and user guide

Indesit DFCX80116 Setup and user guide
User Manual
使用說明書
Model : DFCX80116
產品型號 : DFCX80116
3
繁體中文
2
11
USER MANUAL
EN
INDEX
USER MANUAL
3
How to use the appliance
4-5
Control panel
Indicators
First time use
Daily use
Opening of the door during the cycle
Programs
Care label
Options
4
4
4
4
4
4-5
4
5
Care and Maintenance
Emptying the water tank after each cycle
Cleaning the door filter after each cycle
Cleaning the bottom filter when the relevant indicator turns on
6
6
6
6
Transport and Handling
Product Description
Troubleshooting
Installation Guide
Safety Instructions
6
6
7
8
9-10
3
3
8
Quick guide
3’’
THANK YOU FOR BUYING A WHIRLPOOL PRODUCT.
In order to receive a more complete assistance,
please register your product on
www.whirlpool.com.hk
2
EN
3
h
Before using the appliance carefully read the Safety Instructions.
4
5
6
7
CONTROL PANEL
ON/OFF button (Reset if long pressed)
Program selection Knob
Start/Pause button
Options buttons
4 Dryness level
5 Start delay
6 Timed drying
7 Cycle end
8 Rapid (Key lock if long pressed)
9 Fresh care (Mute if long pressed)
1
2
3
9
1
3’’
8
3’’
3
h
2
4
5
6
7
INDICATORS
Cycle phase:
Drying - Cool down - End of cycle.
Empty water tank Refer to Troubleshooting section:
Failure: Call After-Sales Service DEMO Demo mode
FIRST TIME USE
PROGRAMS
^Default Duration(H:Min)
Make sure that the water tank is correctly inserted. Make sure
that the drain hose on the back of the dryer is fixed correctly,
either to the dryer’s water tank, or to your domestic sewage
system.
^(2:16)
Eco cotton (kg Max*)
Standard cotton programme, suitable to dry normally wet
cotton laundry. Most efficient programme in terms of energy
consumption for drying cotton laundry.
DAILY USE
^(1:40)
Mixed (kg 4)
This programme is ideal for drying cotton and synthetic fabrics
together.
Doing this will keep your machine working at its BEST!
Remember to empty your water tank after each drying cycle.
Remember to clean your filters after each drying cycle. (Refer
to section Care & Maintenance).
1. Open the door and load garments. Always refer to instructions on
clothing labels and the max loads indicated in the Programs
section. Empty pockets. Make sure garments do not get caught
between the door and/or the door filter.
2. Close the door.
3.
4. Select the programme according to the laundry type.
5. Select the options, if necessary.
6. To start the cycle, press the Start/Pause button.
7. At the end of the drying cycle, a buzzer will beep. An indicator
on the control panel signals the end of the cycle. Pull the load
out immediately to prevent the formation of creases on laundry.
8. Turn the machine off by pressing the button On/Off, open the
door and pull clothing out. If the machine is not switched off
manually, after about a quarter of an hour from the cycle end,
the appliance turns off automatically to save energy.
If this last stage is not carried out immediately, some machines
and/or some programmes/options are equipped with Crease Care
system. For some hours, after the end of drying, the drum rotates
at regular intervals to prevent the formation of creases. In case of
power failure, it is necessary to press the button Start/Pause to
restart the cycle.
OPENING OF THE DOOR DURING THE CYCLE
During operation, it is possible to open the door. After having
closed it, press the button Start/Pause again to restart the dryer.
^(2:51)/ Rapid (2:41)
Bed linen (kg Max*)
This programme is intended for drying cotton sheets.
^(1:21)/ Rapid (1:11)
Shirts (kg 3)
This is a programme for Shirts made from cotton or cotton
blend/synthetics.
Sport (kg 4)
For drying sports garments made of synthetics or cotton.
Duvet
Programme intended to dry bulky garments, such as single duvet.
Jeans (kg 3)
For drying cotton jeans-wear and garments made of robust
cotton, like denim, such as trousers and jackets.
Easy ironing
This cycle allows to extend the fibres of garments thus
making ironing and folding easier. Do not use in case of
garments that are still wet. Suitable for small loads of cotton
textiles or cotton blends.
^(00:20)
Refresh
A short programme suitable for refreshing fibres and garments
by means of fresh air. Do not use with garments that are still wet.
It can be used on with any load size but is more effective with
small loads. The cycle duration is about 20 minutes.
CARE LABEL
* MAX LOAD 8 Kg
(Dry load)
Always check the care labels, especially when placing garments in
You can download the Safety Instructions, User Manual,tProduct
xxxx
he tumbFiche
le dryand
er fEnergy
or the fdata
irst tby:
ime. Below are the most commonly
• Visiting our website - docs.whirlpool.eu
used
symbols:
• Using QR Code
• Alternatively, contact our After-sales Service (See phone number
in the
warranty
booklet). When
May be
tumble
dried.
xxxxxxxxxxxx
Do not tumble dry.
Tumble dry – high heat.
Tumble dry – low heat.
4
4
The duration of these programs will depend on the size of the
load, types of textiles, the spin speed used in your washer
and any extra options selected. In machines equipped
with display, the duration of the cycles is shown on the
control panel. The remaining time is constantly checked and
adjusted during the drying cycle to show the best possible
estimate.
^Default Duration(H:Min)
Rapid 30' (kg 0.5 )
^(00:30)
Ideal for drying cotton garments spun at high speed in the
dryer.
^(02:40)
Coloured (kg Max*)
Programme for gentle drying suitable for coloured
garments.
Silk (kg 0.5 )
Gentle drying of silk garments.
^(01:35)
^(00:51)
Wool (kg 1)
Programme for drying wool clothing. It is advisable to turn
the garments inside out before drying. Leave to dry naturally
the heaviest edges that are still damp.
^(00:50)
Delicates (kg 2)
For drying delicate laundry which needs gentle treatment.
Synthetics (kg 4)
For drying laundry made of synthetic fibres.
^(01:30)
OPTIONS
After selecting the programme, the various options can be
set, if necessary.
Dryness level
Press the related button several times to obtain a different
level of residual moisture on garments. An indicator signals the
level being selected.
Iron dry: a very delicate ironing. Suitable for making ironing
of garments easier immediately after the end of the cycle.
Hanger dry: a level intended for delicate garments ready to
be hanged.
Cupboard dry: the garments are ready to be folded and put
away.
Extra dry: used for garments to be worn at the end of the
cycle.
Timed drying
This option allows to set the drying time. Press the corresponding
button to set the required time for drying. An indicator on the
control panel signals the time being selected.
Start delay
This option allows you to set the delay of the cycle start. Press
the corresponding button several times to obtain the required
delay. After having reached the max. settable time, the option is
reset by pressing the button again. An indicator on the control
panel signals the time being selected. After having pressed the
button Start/Pause, the machine signals the remaining time
for the cycle start. In case of door opening, after closing, it is
necessary to press the button Start/Pause.
Rapid
Enables quicker drying.
Fresh care
If garments are left inside the drum after the end of the cycle,
they are subject to bacterial proliferation. This option allows to
prevent this proliferation by controlling the temperature and the
rotation of the drum. This treatment has a max. duration of 6
hours after the end of the programme set. This option remains in
memory if selected in the previous drying.
If this option is used together with the Start Delay, a crease
treatment (a periodic rotation of the drum) is added in the Start
Delay phase.
h
Key lock
This option makes all machine controls inaccesible, except the
button On/Off. When the machine is on: to activate the option,
keep the button pressed until the indicator goes on. To disable the
option, keep the button pressed until the indicator goes off. This
option remains in memory if selected in the previous drying.
Mute
This option turns off all sounds of control panel. Only warnings
remain active.
• To activate the option, keep the button pressed until the
indicator goes on.
• To disable the option, keep the button pressed until the indicator
goes off.
Cycle end
This option activates a prolonged buzzer at the end of the cycle.
Enable it if you are not sure to hear the normal sound at the end
of the cycle. This option remains in memory if selected in the
previous drying.
OPTIONS BUTTONS
These buttons serves to personalise the selected programme according to personal requirements.
Not all options are available for all programmes. Some options are incompatible with the ones
previously set. The buzzer and/or blinking indicators will signal the incompatibility. If the option is
available, the option indicator will stay on. Some options may be kept in the memory of the
programme if selected in the previous drying.
5
5
EN
Quick guide
THANK YOU FOR BUYING A INDESIT PRODUCT.
CARE AND MAINTENANCE
In order to receive a more complete assistance,
filters
essential
parts for
TheyInstructions.
are intended
BeforeThe
using
the are
appliance
carefully
readdrying.
the Safety
registerduring
your product
on
Unplugplease
the dryer
the cleaning
and maintenance
to collect the lint formed during drying process. In case of
www.indesit.eu/register
procedures.
clogged filters, the air flow inside the dryer would be
Emptying the water tank after each cycle (see Fig. A).
seriously affected: the drying times would be longer, the
Pull the container out of the dryer and and empty it into a
energy consumption would increase and the dryer could be
sink or other suitable drain, then place it back. Do not use the dryer damaged. If these procedures are not carried out properly,
the dryer may not start.
without having inserted the container back in place.
TRANSPORT AND HANDLING
back in place. Do not use the dryer without having reinserted the
Never lift the dryer by holding it at the worktop.
1. Unplug the dryer.
2. Make sure that door and water tank are properly closed.
drain hose on the rear of the dryer again (see Installation Guide).
1. Open the door and pull upwards.
Power consumption
correctly.
0.50
left-on mode (Pl) - Watts
turns on (see Fig. C).
it under running water or by using a vacuum cleaner.
However, it is advisable to clean this filter after each cycle to
optimise drying performance. Do not use the dryer without having
inserted the filter in place first.
Remove the bottom filter and the condenser as described below:
1. Open the bottom door.
1.00
Programs
Kg
kWh
Minutes
Eco Cotton *
8
4.76
130
Eco Cotton
4
2.47
70
Synthetics
4
1.83
90
*This is the reference programme for the energy label and suitable to
dry normal wet cotton laundry. This is the most efficient programme
in terms of energy consumption for drying wet cotton laundry.
(Standard/Default starting configuration)
3. Open the rear side of the filter and remove the lint from the
inner surface of the mesh.
water: this is normal).
5a. Approximately every 3 months, clean the condensing unit
5b. Lower the levers situated on the sides of the condenser.
After having removed the condenser, clean it under running
water.
5c. Place the condenser back in place and lift the levers.
checking it is perfectly integrated in place.
8. Make sure the air intake is free.
PRODUCT DESCRIPTION
1. Water Tank
2. Air Intake
3.
4.
A
B
and condenser
1
C
You can download
Manual, Product Fiche and Energy data by:
4 the Safety Instructions, User
2
• Visiting our website - docs.indesit.eu
• Using QR Code
• Alternatively, contact our After-sales Service (See phone number in the warranty booklet). When
D
xxxx
xxxxxxxxxxxx
3
6
3
EN
Quick guide
TROUBLESHOOTING
Before contacting the Service Centre, refer to the table below. Often the malfunctions are minor and can be solved in few minutes.
Malfunction
The tumble
dryer does not
turn on.
The tumble
dryer does not
start.
Possible cause
The plug is not inserted into the socket.
Solution
Insert the plug into the socket.
The plug is faulty.
Try to plug another appliance in the same socket. Do not use
connecting electrical devices to the socket, as adapters or extensions.
A power failure occurred.
Await the reactivation of the power supply.
The door is open.
Close the door.
For machines equipped with this function: await the end of the delay
A time delay for the cycle start was set.
The button Start/Pause was not pressed to start Press the button Start/Pause.
the program.
The function Key Lock was enabled (in case of
machines equipped with this option).
Refer to the Options section and, if the Key Lock is present, disable
it. Switching the machine off is not enough to disable this option.
An appropriate maintenance was not carried
out.
The programme, the time and/or the drying
level set are not suitable for the type and the
amount of load inserted into the dryer.
Refer to the section Care & Maintenance and perform the operations
described.
The garments are too wet.
The programme A power failure might have occurred.
did not end.
Carry out a washing cycle with higher spin speed to remove as much
water as possible.
Refer to the Programs section to check the max. load for each
programme.
In case of power failure, it is necessary to press the button Start/Pause
to restart the cycle.
Water tank
The water tank is full.
Emtpy the water tank. Refer to the section Care & Maintenance.
and/or bottom
operation.
intake is free. Carrying out these operations improperly may cause
damages.
The drying
times are very
long.
The dryer may be overloaded.
DEMO
The cycle lasts
few minutes.
The dryer is in DEMO mode. The DEMO
indicator is on.
The presence
of wrench
symbol signals a The machine sensors detected a failure.
malfunction.
Refer to the sections Programs and Options to find the programme
and the options most suitable for the type of load.
Disable the DEMO mode. The following actions must be carried out
in sequence, without breaks. Switch the machine on and then
switch it off again. Press the Start/Pause button until the buzzer is
heard. Switch the machine on again. The “DEMO” indicator fl ashes
and then turns off.
Switch the dryer off and unplug it. Open the door immediately and
pull laundry out, to allow the heat to dissipate. Wait for about 15
minutes. Reconnect the dryer to the power supply, load the
laundry and restart the drying cycle. If the problem still occurs,
contact the After-Sales Service Centre and communicate the
letters and digits flashing on the display.
For instance: F3 and E2
You can download the user manual by:
• Visiting our website - www.whirlpool.com.hk
• Alternatively, contact our After-Sales Service (See phone number in the warranty booklet). When
4
xxxx
xxxxxxxxxxxx
7
EN
Quick guide
INSTALLATION GUIDE
1
4
2a
5a
2b
5b
10 mm
1
15 mm
15 mm
2
3
max 100 cm
39 inch
6
min 1.5 cm - max 2 cm
min 0.59 inch - max 0.79 inch
..............
xxxx xxxx
xxxx-xxxx W
xxx V ~ xx Hz IPX4
xx A
8
5
SAFETY INSTRUCTIONS
This symbol reminds you to read this instruction manual.
Before using the appliance, read these safety instructions.
Keep them nearby for future reference. These instructions and
the appliance itself provide important safety warnings, to be
observed at all times. The manufacturer declines any liability
for failure to observe these safety instructions, for inappropriate
use of the appliance or incorrect setting of controls.
Very young children (0-3 years) should be kept away from
the appliance. Young children (3-8 years) should be kept
away from the appliance unless continuously supervised.
Children from 8 years old and above and persons with
reduced physical, sensory or mental capabilities or lack of
experience and knowledge can use this appliance only if they
are supervised or have been given instructions on safe use
and understand the hazards involved. Children must not play
with the appliance. Cleaning and user maintenance must not
be carried out by children without supervision.
WARNING: Never stop a tumble dryer before the end of
the drying cycle unless all items are quickly removed and
spread out so that the heat is dissipated.
Items that have been soiled with substances such as
cooking oil, acetone, alcohol, petrol, kerosene, spot removers,
turpentine, waxes and wax removers should be washed in hot
water with an extra amount of detergent before being dried in
the tumble dryer. Items such as foam rubber (latex foam),
shower caps, waterproof textiles, rubber-backed articles and
clothes or pillows fitted with foam rubber pads should not be
dried in the tumble dryer. Remove all objects from pockets,
such as lighters and matches. Do not use the tumble dryer if
industrial chemicals have been used to clean it.
Oil-soaked items should not be dried in the tumble dryer
due to their high flammability.
Never open the door forcibly or use it as a step.
PERMITTED USE
CAUTION: The appliance is not intended to be operated
by means of an external switching device, such as a timer, or
separate remote controlled system.
This appliance is intended to be used in household and
similar applications such as: staff kitchen areas in shops,
offices and other working environments; farm houses; by
clients in hotels, motels, bed & breakfast and other residential
environments.
Do not load the machine above the maximum capacity
(kg of dry cloth) indicated in the programme table.
Do not dry unwashed items in the tumble dryer.
Take care that no lint or dust has accumulated around
the dryer.
IMPORTANT TO BE READ AND OBSERVED
Fabric softeners, or similar products, should be used as
specified by the fabric softener instructions.
This appliance is not for professional use. Do not use the
appliance outdoors.
Do not overdry the laundry.
INSTALLATION
The appliance must be handled and installed by two or more
persons - risk of injury. Use protective gloves to unpack and
install - risk of cuts.
Installation, including water supply (if any), electrical
connections and repairs must be carried out by a qualified
technician. Do not repair or replace any part of the appliance
unless specifically stated in the user manual.
Keep children away from the installation site. After unpacking the
appliance, make sure that it has not been damaged during
transport. In the event of problems, contact the dealer or your
nearest After-Sales Service. Once installed, packaging waste
(plastic, styrofoam parts etc.) must be stored out of reach of
children-risk of suffocation. The appliance must be disconnected
from the power supply before any installation operation-risk of
electric shock. During installation, make sure the appliance does
not damage the power cable-risk of fire or electric shock. Only
activate the appliance when the installation has been completed.
Install the dryer in rooms with adequate ventilation (open
door, ventilation grid or slot larger than 500cm² ) in order to
avoid the backflow of gases into the room from appliances
burning other fuels, including open fires.
If the dryer is installed under a worktop, provide a distance of 10
mm between the upper panel of the dryer and any objects above
it, and 15 mm between the sides of the appliance and the walls or
furniture units adjacent to it.
If the dryer is installed near to a gas or coal stove, provide a
heat insulating plate (85 cm x 57 cm) in between, as the side
facing the stove is covered with aluminium foil.
Exhaust air must not be discharged into a flue which is used
for discharging fumes from appliances burning gas or other fuels.
The appliance must not be installed behind a lockable door, a
sliding door or a door with a hinge on the opposite side to that of
the tumble dryer, in such a way that a full opening of the tumble
dryer door is restricted.
The appliance shall be placed against the wall to limit access
to its rear side.
Take care not to use a carpet which obstructs ventilation
openings in the base of the dryer.
If you want to stack the dryer on a washing machine, first
contact our After-Sales Service or your specialist dealer to verify
the complete list of suitable models. The stacking is only possible
if the dryer is attached to the washing machine by means of the
appropriate stacking kit available through our After-Sales Service
or your specialist dealer. Instructions for the correct assembly are
supplied with the stacking kit.
9
6
ELECTRICAL WARNINGS
It must be possible to disconnect the appliance from the
power supply by unplugging it if plug is accessible, or by a multi-pole
switch installed upstream of the socket in accordance with the
wiring rules and the appliance must be earthed in conformity
with national electrical safety standards.
Do not use extension leads, multiple sockets or adapters. The
electrical components must not be accessible to the user after
installation. Do not use the appliance when you are wet or
barefoot. Do not operate this appliance if it has a damaged power
cable or plug, if it is not working properly, or if it has been
damaged or dropped.
If the supply cord is damaged, it must be replaced with an
identical one by the manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard - risk of electric shock.
CLEANING AND MAINTENANCE
WARNING: Ensure that the appliance is switched off and
disconnected from the power supply before performing any
maintenance operation; never use steam cleaning equipment risk of electric shock.
Make sure that all lint traps are cleaned before starting any
drying cycle.
DISPOSAL OF PACKAGING MATERIALS
The packaging material is 100% recyclable and is marked with the
recycle
symbol.
The various parts of the packaging must therefore be disposed of
responsibly and in full compliance with local authority regulations governing waste disposal.
DISPOSAL OF HOUSEHOLD APPLIANCES
This appliance is manufactured with recyclable or reusable
materials. Dispose of it in accordance with local waste disposal
regulations.
For further information on the treatment, recovery and recycling
of household electrical appliances, contact your local authority,
the collection service for household waste or the store where you
purchased the appliance. This appliance is marked in compliance
with European Directive 2012/19/EU, Waste Electrical and
Electronic Equipment (WEEE). By ensuring this product is
disposed of correctly, you will help prevent negative consequences for the environment and human health.
The symbol
on the product or on the accompanying
documentation indicates that it should not be treated as
domestic waste but must be taken to an appropriate collection
center for the recycling of electrical and electronic equipment.
7
10
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising