Whirlpool | ZENDOSE9 | Use and care guide | Whirlpool ZENDOSE9 Use and care guide

Whirlpool ZENDOSE9 Use and care guide
Health & Safety, Use & Care and Installation guide
www.whirlpool.eu/register
ENGLISH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2
p .3
EN
ENGLISH
HEALTH & SAFETY, USE & CARE
and INSTALLATION GUIDES
THANK YOU FOR BUYING A WHIRLPOOL PRODUCT.
In order to receive a more complete assistance,
please register your appliance on www.whirlpool.eu/register
Index
SAFETY RECOMMENDATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
IMPORTANT SAFETY INSTRUCTIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
SAFEGUARDING THE ENVIRONMENT. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
DECLARATION OF CONFORMITY. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
PRODUCT DESCRIPTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
APPLIANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
DETERGENT DISPENSER. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
CONTROL PANEL. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
TECHNICAL DATA FOR WATER CONNECTION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
DOOR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
DRUM LIGHT (if available) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
ACCESSORIES. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
HOW TO USE THE APPLIANCE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
FIRST TIME USE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
DAILY USE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
SORTING YOUR LAUNDRY. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
HOW TO USE THE WASHING MACHINE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
PROGRAMMES AND OPTIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
3
FUNCTIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
INDICATORS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
AUTO DOSING FUNCTION: AUTOMATIC DOSING OF DETERGENT / FABRIC SOFTENER. . . . . . . . . . . . . . . . . . . 31
AUTO DOSING / FIRST USE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
AUTO DOSING / DAILY USE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
SAVING TIPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
CLEANING & MAINTENANCE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
CLEANING THE OUTSIDE OF THE WASHING MACHINE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
CHECKING THE WATER SUPPLY HOSE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
CLEANING THE MESH FILTERS IN THE WATER SUPPLY HOSE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
CLEANING THE DETERGENT DISPENSER. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
CLEANING THE WATER FILTER / DRAINING RESIDUAL WATER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
TRANSPORT AND HANDLING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
TROUBLESHOOTING. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
DOOR – HOW TO OPEN IT IN CASE OF A FAILURE, TO TAKE OUT YOUR LAUNDRY
(Available only on certain models). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
AFTER-SALES SERVICE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Installation Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
4
EN
Health and Safety guide
SAFETY
RECOMMENDATIONS
IMPORTANT SAFETY INSTRUCTIONS
YOUR SAFETY AND SAFETY
OF OTHERS IS VERY
IMPORTANT.
This manual and the appliance
itself provide important safety
warnings, to be read and
observed at all times.
This is the safety alert symbol.
This symbol alerts you to
potential hazards that can kill
or hurt you and others.
All safety messages will follow
the safety alert symbol and
either the word DANGER or
WARNING. These words
mean:
All safety warnings give
specific details of the potential
risk presented and indicate
how to reduce risk of injury,
damage and electric shock
resulting from improper use
of the appliance. Carefully
observe the following
instructions.
Failure to observe these
instructions may lead to risks.
The Manufacturer declines any
liability for injury to persons or
animals or damage to property
if the above advice and
precautions are not respected.
Keep these instructions close
at hand for future reference.
Do not store explosive
substances such as aerosol
DANGER
cans and do not place
or use gasoline or other
Indicates a hazardous situation flammable materials in or
which, if not avoided, will
near the appliance: a fire may
cause serious injury.
break out if the appliance is
inadvertently switched on.
WARNING
When scrapping the
Indicates a hazardous situation appliance, make it unusable
which, if not avoided, could
by cutting off the power cable
cause serious injury.
and removing the doors and
shelves (if present) so that
children cannot easily climb
inside and become trapped.
Do not leave the appliance
unattended even for a few
days, since it is a potential
source of danger for children.
Remove the transport bolts
The washing machine is fitted
with transport bolts to avoid
any possible damage to the
interior during transport.
Before using the machine, it is
imperative that the transport
bolts are removed.
After their removal, cover the
openings with the 4 enclosed
plastic caps.
Never open the door forcibly
or use it as a step.
INTENDED USE
OF THE PRODUCT
This appliance is designed
solely for use as domestic
usage. To aim the appliance as
professional use is forbidden.
The manufacturer declines
all responsibility for
inappropriate use or incorrect
setting of the controls.
The appliance is not intended
to be operated by means of
an external timer or separate
remote control system.
5
Do not use the appliance
outdoors.
This washing machine is
exclusively destined to treat
machine washable laundry in
quantities which are usual for
private households.
INSTALLATION
Installation and repairs must
be carried out by a qualified
technician, in compliance
with the manufacturer’s
instructions and local safety
regulations. Do not repair
or replace any part of the
appliance unless specifically
stated in the user manual.
Use protective gloves to
perform all unpacking and
installation operations.
The appliance must be
disconnected from the power
supply before carrying out any
installation operation.
Only activate the appliance
when the installation
procedure has been
completed.
After unpacking the appliance,
make sure that it has not been
damaged during transport. In
the event of problems, contact
the dealer or your nearest
After-sales Service.
During installation, make
sure the appliance does not
damage the power cable.
6
The appliance must be
handled and installed by two
or more persons.
When installing the appliance
make sure that the four feet
are stable and resting on
the floor, adjusting them as
required, and check that the
appliance is perfectly level
using a spirit level.
Remove the bottom
protection by tilting and
turning the washing machine
on one rear bottom corner.
Make sure that the plastic
part of the bottom protection
(if available on the model)
remains in the packing and
not in the machine bottom.
This is important, as otherwise
the plastic part could damage
the washing machine during
operation.
If the appliance was exposed
to the cold prior to delivery,
keep it at room temperature
for a few hours before
operating.
Do not install your appliance
where it may be exposed to
extreme conditions, such as:
poor ventilation, temperature
below 5°C or above 35°C.
In case of wooden or so-called
“floating floors” (for instance
certain parquet or laminate
floors), place the appliance
on a sheet of plywood at least
60 x 60 cm wide/ deep and
at least 3 cm thick which is
secured to the floor.
Use only new hoses to connect
the appliance to the water
supply. Used hoses must
not be used and should be
discarded.
Move the appliance without
lifting it by the worktop.
Connect the water inlet
hose(s) to the water supply
in accordance with the
regulations of your local water
company.
For models dedicated only for
cold water: Do not connect to
the hot water supply.
For models with hot fill: the
hot water inlet temperature
must not exceed 60 °C.
Make sure that the ventilation
openings in the base of
your washing machine (if
available on your model) are
not obstructed by a carpet or
other material.
The supply water pressure
must be in range 0.1-1 MPa.
If you want to place a dryer
on top of your washing
machine, first contact our
After-Sales Service or your
specialist dealer to verify if
this is possible. This is only
admitted if the dryer is fixed
on the washing machine by
using an appropriate stacking
kit available through our After-
EN
Sales Service or your specialist
dealer.
ELECTRICAL WARNINGS
Make sure the voltage
specified on the rating plate
corresponds to that of your
home.
The power supply ranges are
indicated on the rating plate.
Regulations require that the
appliance is earthed.
For installation to comply with
current safety regulations,
an omnipolar switch with
minimum contact gap of 3mm
is required.
If the power cable is damaged
it must be replaced with an
identical one. The power
cable must only be replaced
by a qualified technician
in compliance with the
manufacturer instruction and
current safety regulations.
Contact an authorized service
center.
plug, if the plug is not suitable
for you socket outlet, contact a
qualified technician.
Do not touch the appliance
with any wet part of the body
and do not operate it when
barefoot.
Do not operate this appliance
if it has a damaged mains cord
or plug, if it is not working
properly, or if it has been
damaged or dropped. Do not
immerse the mains cord or
plug in water. Keep the cord
away from hot surfaces.
For the Republic of Ireland
only
The information given in
respect of Great Britain will
When using a residual current frequently apply, but a third
circuit breaker (RCCB), only use type of plug and socket is also
a model marked with
used, the 2-pin, side earth
type.
ELECTRICAL CONNECTION
FOR GREAT BRITAIN AND
IRELAND ONLY
The electrical components
must not be accessible to the
user after installation.
The power cable must be long
enough for connecting the
appliance, once fitted in its
housing, to the main power
supply.
Do not use extension leads.
Do not pull the power supply
cable.
Do not use multiple plug
adaptors if the appliance is
fitted with a plug.
For appliances with fitted
Important:
The fuse cover must be
refitted when changing a fuse
and if the fuse cover is lost the
plug must not be used until a
correct replacement is fitted.
Correct replacement are
identified by the colour insert
or the colour embossed in
words on the base of the plug.
Replacement fuse covers
are available from your local
electrical store.
Fuse replacement
If the mains lead of this
appliance is fitted with a BS
1363A 13amp fused plug, to
change a fuse in this type of
plug use an A.S.T.A. approved
fuse to BS 1362 type and
proceed as follows:
1. Remove the fuse cover (A)
and fuse(B).
2. Fit replacement 13A fuse
into fuse cover.
3. Refit both into plug.
Socket outlet / plug (valid
for both countries)
If the fitted plug is not suitable
for your socket outlet, please
contact After-sales Service for
further instruction. Please do
not attempt to change plug
yourself. This procedure needs
to be carried out by a qualified
technician in compliance with
the manufactures instructions
and current standard safety
regulations.
CORRECT USE
Only use detergents and/or
additives that are specifically
produced for domestic
washing machines/tumble
dryers.
Do not exceed the maximum
load allowed. Check the
maximum load allowed in the
programme chart.
Turn off the tap when not in
use.
7
Do not use any solvents
(e.g. turpentine, benzene),
detergents containing
solvents, scouring powder,
glass or general purpose
cleaners, and flammable fluids;
do not machine wash fabrics
that have been treated with
solvents or flammable liquids.
CHILDREN SAFETY
Very young (0-3 years) and
young children (3-8 years)
shall be kept away unless
continuously supervised.
Children from 8 years old
and above and persons with
reduced physical, sensory or
mental capabilities or lack of
experience and knowledge
can use this appliance only
if they are supervised or
have been given instructions
on safe appliance use and
if they understand the
hazards involved. Children
shall not play with the
appliance. Cleaning and user
maintenance shall not be
made by childern without
supervision.
Keep the packaging materials
(plastic bags, polystyrene
parts, etc.) out of reach of
children.
8
CLEANING AND
MAINTENANCE
The appliance must be
disconnected from the power
supply before carrying out
any cleaning or maintenance
operation.
Never use steam cleaning
equipment.
SAFEGUARDING
THE ENVIRONMENT
DISPOSAL OF PACKAGING
MATERIALS
SCRAPPING OF HOUSEHOLD
APPLIANCES
The packaging material is 100%
recyclable and is marked with the
recycle symbol:
This appliance is manufactured
with recyclable or reusable
materials. Dispose of it in
accordance with local waste
disposal regulations.
The various parts of the
packaging must therefore be
disposed of responsibly and
in full compliance with local
authority regulations governing
waste disposal.
EN
For further information on
the treatment, recovery and
recycling of household electrical
appliances, contact your
competent local authority, the
collection service for household
waste or the store where you
purchase the appliance.
This appliance is marked in
compliance with European
Directive 2012/19/EU, Waste
Electrical and Electronic
Equipment (WEEE).
By ensuring this product is
disposed of correctly, you
will help prevent potential
negative consequences for the
environment and human health,
which could otherwise be caused
by inappropriate waste handling
of this product.
This symbol on the
product or on the
accompanying
documentation indicates
that it should not be treated as
domestic waste but must be
taken to an appropriate
collection centre for the recycling
of electrical and electronic
equipment.
9
DECLARATION
OF CONFORMITY
This appliance has been
designed, manufactured and
marketed in compliance with:
› safety objectives of the “Low
Voltage” Directive 2006/95/CE
(which replaces 73/23/ CEE and
subsequent amendments);
› the protection requirements
of Directive “EMC” 2004/108/
EC.
Electrical safety of the
appliance can only be
guaranteed if it is correctly
connected to an approved
earthing system.
10
EN
Use and Care guide
PRODUCT DESCRIPTION
APPLIANCE
1.
2.
3.
4.
5.
1.
2.
3.
4.
5.
6.
Worktop
Detergent dispenser
Control panel
Door handle
Door
Water filter / Emergency drain hose (if available)
- behind plinth 7. Plinth (removable)
8. Adjustable feet (4)
6.
7.
8.
DETERGENT DISPENSER
Automatic dosing:
1
IMPORTANT: Only use liquid detergent to fill the
detergent tanks (“1” and “2”); never use powder
detergent.
r
ne
fte
2
4
1
3
1
er
n
fte
So
2
Choose your preferred configuration among those
mentioned in section AUTO DOSING - FIRST USE in
the USE AND CARE GUIDE. The labels on the tank
flaps can be turned or exchanged to remind you
the chosen configuration.
So
2. Tank 2
• Fabric softener OR
• Liquid detergent (generic or specific detergent
such as colour, wool or sport detergent)
Maximum filling quantity: 400 ml.
2
1. Tank 1
• Liquid generic detergent OR
• Liquid specific detergent (e.g. for colours, wool,
sports garments etc.)
Maximum filling quantity: 600 ml.
IMPORTANT: Never fill Fabric Softener in Tank 1.
11
Manual Dosing:
3. Detergent compartment for manual
dosing
• Powder or liquid detergent
• Additives
If you use powder detergent, make sure to fill
the compartment only up to the “max” mark.
4. Release button
Press down to remove the detergent dispenser
for cleaning.
Detergent recommendations
for various types of laundry
Type of laundry
Temperature range Recommended type of detergent
White robust laundry
(cold-95°C)
White delicate laundry
(cold-40°C)
Heavy duty detergents
Mild detergents containing whitener and/or
optical brighteners
Detergents containing whitener and/or optical
brighteners
Colour detergents without whitener / optical
brighteners
Light/pastel- shaded colours (cold-60°C)
Intensive colours
(cold-60°C)
Black/dark colours
(cold-60°C)
Special detergents for black/dark laundry
* Find water softener appropriate for your washing
machine under www.whirlpool.eu
CONTROL PANEL
13.
12.
MAX
60°
40°
30’
1
1.
2.
1. On/Off button
(if held: Reset/Drain)
2. Programme button
3. Auto dosing / Tank 1
4. Auto dosing / Tank 2
5. Fresh Care button
6. Knob
(turn to select and press to confirm)
12
2
3.
4.
5.
6.
7.
8.
9.
10.
11.
7. Finish in button
8. Temperature button
9. Spin Speed button
10. Options button
(if held: Key lock)
11. Start/Pause button
12. Display
13. Programmes area
TECHNICAL DATA FOR WATER
CONNECTION
EN
WATER CONNECTION
WATER SUPPLY
Cold
WATER TAP
3/4” threaded hose connector
MINIMUM WATER SUPPLY PRESSURE
100 kPa (1 bar)
MAXIMUM WATER SUPPLY PRESSURE
1000 kPa (10 bar)
13
DOOR
To open the door, pull the handle
To close the door, hold the handle and push so that
you can hear it click shut.
DRUM LIGHT (if available)
• During programme selection: the light goes on
for laundry loading
• After programme start, the light fades on and off
while the laundry load is detected.
• After programme end, when you open the door,
the light goes on for a while for unloading the
laundry. Then it goes off to save energy; touch
any button to switch it on again.
ACCESSORIES
Contact our After-Sales Service to check if the
following accessories are available for your washing
machine (and dryer) model
PEDESTAL
Can be installed beneath your washing machine,
to raise the appliance and allow for a more
comfortable laundry loading and unloading.
14
STACKING KIT SHELF
by which your dryer can be fixed on top of your
washing machine to save space and to facilitate
loading and unloading your dryer in the higher
position.
EN
HOW TO USE
THE APPLIANCE
FIRST TIME USE
If you plug in the washing machine, it will switch on
automatically. You will be asked to set the desired
language for the display.
Turn the knob to select the desired language, then
press the knob to confirm.
Afterwards you can adapt the water hardness
setting of your washing machine to your regional
water hardness. This is recommended in order to
optimize the Dosing Aid function. Turn the knob to
choose between soft / medium / hard and confirm
by pressing the knob.
To remove any residues from the manufacturing
process.
1.
Select programme “Cotton” with temperature
95°C.
2. Add a small amount of detergent to the
manual dosing compartment
of the detergent
dispenser (maximum 1/3 of the quantity the
detergent manufacturer recommends for lightly
soiled laundry).
Deactivate the buttons for Auto dosing (Tank 1 and
Tank 2): press them so that the button light goes
off.
3. Start the programme without adding any
laundry.
See section “DAILY USE” for more information on
how to select and start a programme.
AUTO DOSING FUNCTION
The detergent dispenser of the washing machine is
equipped with a two tanks system for the automatic
dispensing of liquid detergent and softener.
Before using this function, follow the instructions
in the USE AND CARE GUIDE/AUTO DOSING – FIRST
USE to:
1. Set the correct water hardness level
2. Set tank 2 content. By default, Tank 1 is set for a
detergent (your main detergent), and Tank 2 is set
for fabric softener. If you do not use fabric softener,
set Tank 2 for another detergent.
3. Check/adjust the preset dosing quantities.
By default, the system comes with the following
dosing values:
• 80 ml detergent for Tank 1
• 30 ml softener for Tank 2
You need to adjust these preset dosing values to
the dosing values reported on the detergent and
softener package that you intend to use.
After the Auto Dosing function is set for use, fill the
tanks with the appropriate content and install the
labels on the tanks accordingly, as explained in the
USE AND CARE GUIDE / AUTO DOSING – FIRST USE.
15
DAILY USE
SORTING YOUR LAUNDRY
1. REMOVE ALL OBJECTS FROM
POCKETS
• Coins, pins etc. can damage your laundry
as well as parts of the washing machine.
• Objects like paper handkerchiefs will tear into
small pieces which must be removed manually
after the wash.
2. CLOSE ZIP FASTENERS,
BUTTONS OR HOOKS. TIE LOOSE
BELTS OR RIBBONS TOGETHER.
• Wash small items (e.g. nylon stockings, belts etc.)
and items with hooks (e.g. bras) in a laundry bag
or pillow case with zip fastener. Always remove
curtain rings, or wash curtains with the rings
safely tied inside a cotton bag.
16
3. TYPE OF FABRIC / CARE LABEL SYMBOL
Cottons, mixed fibres, easy care / synthetics, wool,
handwash items.
• Colour
separate coloured and white items. Wash new
coloured articles separately.
• Size
Wash items of different sizes in the same
wash load, to improve washing efficiency and
distribution of the articles in the drum.
• Delicates
Wash delicate items separately; they require
gentle treatment.
EN
HOW TO USE THE WASHING MACHINE
1. LOAD LAUNDRY
• Open the door and load the laundry.
Load the articles one at a time loosely
into the drum, without overfilling. Observe the
load sizes given in the programme chart.
Overloading the machine will result in
unsatisfactory washing results and creased
laundry.
Select programme
Make sure that the programme button
lights up. Turn the knob to select the
desired programme. The indicator of the selected
programme lights up, and the programme and its
default duration appear on the display.
Confirm the desired programme by pressing the
knob. The maximum possible laundry load for the
selected programme is indicated on the display.
2.
CLOSE DOOR
• Make sure that no laundry gets
stuck between door glass and
rubber seal.
• Close the door so that you can hear it click shut.
3. OPEN WATER TAP
• Make sure that the washing machine is
connected to the mains.
• Open the water tap.
4. SWITCH ON WASHING MACHINE
• Press the On/Off button until the
programme button lights up. An
animation will appear, and there will be a sound.
Afterwards the washing machine is ready to be
operated.
• The programme setting which you used last will
appear on the control panel.
5. SET THE DESIRED PROGRAMME
GUIDED MODE
the button light will guide you through setting a
programme in the following order: selection of
programme / temperature / spin speed / options.
As soon as you confirm a selection by pressing the
knob, the button light will jump to the next step.
Find more information regarding programmes in
section PROGRAMMES, OPTIONS AND FUNCTIONS
and in the Daily Reference Guide.
Change temperature, if needed
If you want to change the temperature
indicated on the display, make sure that the
Temperature button lights up.
Turn the knob to select the desired temperature,
then press the knob to confirm
Change spin speed, if needed
If you want to change the spin speed
indicated on the display, make sure that
the Spin button lights up.
Turn the knob to select the desired spin speed, or
Rinse hold , then press the knob to confirm.
If you select spin speed “0”, the programme ends
with draining the rinse water. No final spin cycle
will be applied.
If you select “Rinse hold”, the programme will
stop after the rinse phase. The laundry will remain
immerged in the last rinse water. See more
information in section PROGRAMMES, OPTIONS
AND FUNCTIONS / Rinse hold.
17
Select options, if needed
If you want to select additional options,
make sure that the options button lights
up. The options which are selectable for your
programme are indicated by lighting arrows.
Turn the knob to select the desired options. The
symbol of the selected optionblinks.
To confirm it, press the knob. The option symbol
lights up solidly.
Options may not be combinable with each other.
When selecting an option, the non-combinable
option will be deactivated automatically if this is
the case.
Some options / functions can be selected by
directly pressing the button:
1
2
If such an option is not selectable for the
programme, it switches off automatically when the
button is pressed.
Refer to section PROGRAMMES AND OPTIONS for
more information.
INDIVIDUAL MODE
After you have switched on the washing machine,
you are not forced to follow the GUIDED MODE.
It is up to you which order you choose to set your
programme. To do a setting, first press the relevant
button, then turn the knob to select, and finally
press the knob to confirm.
The range of temperatures, spin speeds and
options depend on the programme selected.
Therefore it is recommended to start your setting
with selecting the programme.
6. ADD DETERGENT
• If you want to add the detergent
manually, pull out the detergent
dispenser and add detergent (and additives) now,
as indicated in section DETERGENT DISPENSER.
Observe the dosing recommendations on the
detergent pack. If you have selected PREWASH
or FINISH IN, observe the instructions in section
PROGRAMMES AND OPTIONS, and FUNCTIONS.
Afterwards carefully close the detergent
18
dispenser.
• If you want the washing machine to dose the
detergent automatically, simply make sure the
Auto Dosing function is activated (refer to section
OPTIONS, FUNCTIONS AND INDICATORS / Auto
dosing). The detergent is added by the Auto
dosing system after programme start.
To assure correct dosage, make sure that the Auto
dosing system is adapted to your detergents /
softener (refer to AUTO DOSING / AILY USE).
Correct dosing of detergent / additives is
important, because
• it optimizes the cleaning result
• it avoids irritating residues of surplus detergent in
your laundry
• it saves money by avoiding waste of surplus
detergent
• it protects the washing machine by avoiding
calcification of components
• it respects the environment by avoiding
unnecessary environmental burden
7.
START PROGRAMME
• Press and hold “Start/Pause” until the
button lights up solidly; the programme
starts.
• The drum turns, and the load is detected. The
display indicates the load sensing, while on the
control panel an animation occurs.
• The remaining programme duration which is
indicated on the display can vary. Factors like
unbalance in the wash load, or foam formation,
can have an effect on the programme duration.
Whenever the remaining programme duration
is calculated newly, the display indicates the
sensing, and an animation occurs on the control
panel.
• If the washing machine detects an unbalance
in the laundry load, the washing machine
automatically tries to create a balance. The
display indicates the load balancing.
Refer to section Troubleshooting for more
information on unbalance in the laundry load.
8. CHANGE THE SETTINGS OF A RUNNING
PROGRAMME, IF NEEDED
You can still change the settings while a
programme is running. The changes will be
applied, provided the respective programme phase
EN
has not finished yet.
• Press the relevant button (for example the “Spin
speed” button to change the spin speed). The
value will blink for a few seconds.
• While blinking, you can adjust the setting
by turning the knob. If the value stopped
blinking and you have not yet done the desired
modification, press the button again.
example to add more laundry, or to remove
laundry which was loaded by mistake.
• Press “Start/Pause” to proceed with the
programme.
• Press the knob to confirm the modification. If you
do not confirm, the modification will be
confirmed automatically – the modified setting
will stop blinking.
11. SWITCH OFF THE WASHING MACHINE
The programme will proceed automatically after
you have changed the setting. To prevent that a
running programme is changed by accident (for
(see
instance by children), use the “Key lock”
paragraph PROGRAMMES, OPTIONS AND
FUNCTIONS).
10. RESET A RUNNING PROGRAMME, IF
NEEDED
• Press and hold the “On/Off” button until
the display indicates that the programme
is cancelled. The water drains. The
programme is ended, and the door unlocks.
AFTER PROGRAMME END
• The display indicates that the cycle is
finished, and the “Door open” indicator
lights up – you can take out your laundry.
• Press “On/Off” to switch off the washing
machine. If you do not switch it off,
the washing machine will switch off
automatically after about a quarter of an hour
after programme end, to save energy.
• Leave the door ajar, so that the inside of the
washing machine can dry.
To change the settings of a running programme,
you can also
• Press “Start/Pause” to put the running
programme on pause
• Change your settings
• Press “Start/Pause” again to continue the
programme.
If you have changed the programme, do not add
detergent for the new programme.
9. PAUSE A RUNNING PROGRAMME AND
OPEN THE DOOR, IF NEEDED
After programme start, the display indicates
when the programme can still be paused to add
garments.
• Press and hold “Start/Pause” to pause
a running programme
• Provided water level or temperature is
not too high, the “door open” indicator
lights up. You can open the door, for
19
PROGRAMMES
AND OPTIONS
For choosing the appropriate programme for your
kind of laundry, always respect the instructions on the
care labels of the laundry.
PROGRAMME
Type of Wash
and Recommendations
Eco Cotton
Normally soiled cotton laundry.
At 40 °C and 60 °C standard cotton
programme and most favourable
programme in terms of combined
water and energy consumption. Basis
for the values indicated on the Energy
Label.
Normally to heavily soiled robust
laundry made of cotton and linen, such
as towels, underwear, table, bed linen
etc.
COTTON
Care
Settings
Labels
max. load
max
temperature range
60°C
max
selectable options Intensive
Rinse, Rapid, Colours 15°,
Fresh Care
max spin speed
max. load
max
temperature range
95°C
Lightly to normally soiled robust
laundry made of cotton, linen, artificial
fibres and their blends.
Effective one-hour programme. Only
wash similar colours together in one
wash load.
SYNTHETICS
Normally soiled laundry made
of artificial fibres (like polyester,
polyacrylics, viscose etc.) or their
blends with cotton.
DELICATES
Fine laundry made of delicate fabrics,
which needs gentle treatment.
20
Cold to
max
Prewash,
Hot finish, Heavy soil,
Intensive rinse, Rapid,
Colours 15°, Fresh care
max. load 6.0 kg
temperature range Cold to
40°C
max spin speed max
selectable options Hot Finish,
Intensive Rinse, Rapid,
Colours 15°, Fresh Care
max. load 3.5 kg
temperature range Cold to
60°C
max spin speed max
selectable options Prewash,
Heavy Soil, Intensive
Rinse, Rapid, Colours 15°,
Fresh Care
max. load 2.5 kg
temperature range Cold to
40°C
max spin speed 1000
selectable options Prewash,
Rapid, Colours 15°, Fresh
Care
max spin speed
selectable options
MIXED
Cold to
EN
PROGRAMME
Type of Wash
and Recommendations
WOOL
Woolens, labeled with the Woolmark
and identified as machine washable, as
well as textiles made of silk, linen, wool
and viscose marked as handwashable.
Respect the manufacturers
recommendations on the care label.
Lightly soiled laundry without stains,
made of cotton and/or synthetics.
Refresh programme.
RAPID 30’
30’
COLOURS
Lightly to normally soiled laundry
made of cotton, synthetics or their
blends; also delicates.
Helps preserving the colours of your
laundry. Take care to use detergent
which is appropriate for the colours of
your laundry load.
SPIN
Separate intensive spin programme.
Suitable for robust laundry.
Care
Settings
Labels
max. load
2.0 kg
temperature range
40°C
Cold to
1000
Rapid,
Colours 15°, Fresh Care
max. load 3.0 kg
temperature range Cold to
30°C
max spin speed max
selectable options Colours 15°,
Fresh Care
max. load 6.0 kg
temperature range Cold to
60°C
max spin speed 1000
selectable options Prewash,
Heavy Soil, Rapid, Colours
15°
max spin speed
selectable options
max. load
max
Cold
max
selectable options Fresh Care
max. load max
temperature range Cold
max spin speed max
selectable options Intensive
Rinse, Fresh Care
temperature range
max spin speed
RINSE&SPIN
Separate rinse and intensive spin
programme. Suitable for robust
laundry.
DRAIN
Separate programme to drain the
water, without spinning. Can be
selected if your laundry is in Rinse
hold, and you want to drain the water
without spinning the wet laundry. As
an alternative to the Drain programme,
you can select spin speed “0” to
terminate the Rinse hold without
spinning. Appropriate for delicate
laundry like fine garments or curtains.
To set one of the following
programmes, select and confirm the
special programmes position. Then
turn the knob to select one of the
following eight programmes; the
display indicates the programme
name. Confirm the desired programme
by pressing the knob.
SPECIAL
PROGRAMMES
21
PROGRAMME
SHIRTS
DUVET
BED LINEN
CASHMERE
SPORT
22
Type of Wash
and Recommendations
Shirts, blouses and fine business
clothes made of cotton, synthetics or
their blends.
Provides gentle treatment for fine
garments.
Big items such as sleeping bags,
washable blankets, bathmats, pillows
and duvets filled with feathers or
synthetic material.
Adapted to wash and spin big laundry
items.
Respect the manufacturer’s
recommendations on the care label of
the laundry
White or coloured bed linen made of
cotton and synthetic fibers, or blends
of both.
Reduces microbes and gently cleans,
also delicate bed linen. A thorough
rinse phase helps to prevent detergent
and pollen residues.
Prefer powder detergent for this
programme.
High-quality cashmere garments
identified as machine washable or
hand washable.
Use liquid detergent for woolen
laundry. Respect the manufacturer’s
recommendations on the care label of
the laundry.
Normally soiled and sweaty sportswear
made of cotton jersey or microfibers.
This programme includes a prewash
cycle – you can add detergent also
to the prewash chamber for washing
soiled sports garments.
Do not use softener; this can harm
the elastane fibers often contained in
sportswear.
Care
Settings
Labels
max. load
2.5 kg
temperature range
40°C
Cold to
1000 rpm
Prewash,
Colours 15°, Rapid, Fresh
Care
max. load 3.0 kg
temperature range Cold to
60°C
max spin speed 1000 rpm
selectable options Prewash,
Intensive rinse, Hot finish,
Colours 15°, Rapid, Fresh
Care
max spin speed
selectable options
max. load
3.5 kg
temperature range
95°C
Cold to
max
selectable options Prewash,
Intensive Rinse, Hot finish,
Colours 15°, Rapid, Fresh
Care
max spin speed
max. load
2.0 kg
temperature range
40°C
Cold to
400 rpm
Colours 15°,
Rapid, Fresh Care
max spin speed
selectable options
max. load
3.5 kg
temperature range
40°C
Cold to
max
Prewash,
Intensive Rinse, Colours
15°, Rapid, Fresh Care
max spin speed
selectable options
EN
PROGRAMME
JEANS
Type of Wash
and Recommendations
Normally soiled cotton jeans-wear and
garments made of robust jeans-like
material, such as trousers and jackets.
For dark jeans-wear, use of
special detergent for dark laundry
recommended.
BABY ITEMS
Normally soiled baby clothes made of
cotton and/or linen.
The suds are rinsed out even more
thoroughly, which helps to protect
sensitive baby skin.
MINI LOAD
Cotton and/or synthetic laundry made
of stable fabric types.
Ideal for washing a small laundry load
in an economic way.
Pre-treatment of stains recommended.
Not appropriate for delicate laundry.
Care
Settings
Labels
max. load
5.0 kg
temperature range
60°C
Cold to
max
Prewash,
Heavy soil, Intensive Rinse,
Hot finish, Colours 15°,
Rapid, Fresh Care
max. load 5.0 kg
temperature range Cold to
60°C
max spin speed max
selectable options Intensive
Rinse, Colours 15°, Rapid,
Fresh Care
max. load 1.0 kg
temperature range Cold to
40°C
max spin speed max
selectable options Intensive
Rinse, Colours 15°, Rapid,
Fresh Care
max spin speed
selectable options
23
OPTIONS SELECTABLE BY THE OPTIONS
BUTTON
The programme chart gives an
overview of possible combinations
of programmes and options. Not
all combinations of programmes
PREWASH
and options are selectable.
Also certain options are not
combinable. In this case, the
indicator of the non-combinable
Adds a prewash phase to the wash
programme selected.
For heavily soiled laundry (e.g. with
sand or granular dirt). – Shake out the
laundry thoroughly before loading it
into the drum.
option blinks and switches off
again, and a signal sounds.
• manually: add the detergent
portion for the prewash phase
directly to the drum in a detergent
ball, before starting the programme.
For adding detergent to the prewash
phase
• automatically: make sure that the
auto dosing system is activated (see
FUNCTIONS / Auto Dosing)
HOT FINISH
The rinse phase completes with a
warm rinse, which relaxes the fabric
fibres and passes into a gentle and
shorter spin phase.
The laundry feels comfortably warm
when taking it out shortly after
programme end.
COLOURS 15°
Helps to preserve the colours of
your laundry by washing it with cold
water (15°C). Saves energy for water
heating, while keeping a good wash
result.
Make sure that your detergent can
be used with cold wash temperatures
(15 or 20 °C).
Suitable for lightly soiled coloured
laundry without stains.
24
Not selectable for Cotton 95°C.
EN
HEAVY SOIL
Helps to clean heavily soiled, stained
laundry by optimizing the efficiency
of additives for stain removal.
Add an appropriate amount
of in-wash additive for stain
removal (powder) to the main
wash compartment, together
with your detergent. Only use
powder detergent with this option.
Respect the manufacturer’s dosing
instructions.
May prolong the programme by up to
15 minutes.
IMPORTANT: Appropriate for use
of stain removers and bleaches on
oxygen basis.
Chlorine or perborate bleaches must
not be used!.
INTENSIVE RINSE
Helps to avoid detergent residues
in the laundry by a prolonged rinse
phase.
Particularly suitable for washing baby
laundry, for people suffering from
allergies and for areas with soft water.
.
RAPID
Enables quicker washing. Shortens
the programme duration while
keeping a good wash result.
Recommendable for only lightly
soiled laundry.
Not selectable for Cotton 95 °C.
25
OPTIONS WHICH ARE DIRECTLY SELECTABLE
BY PRESSING THE RESPECTIVE BUTTON
FRESH CARE
Helps to keep your laundry fresh
if you cannot unload it soon after
programme end.
The washing machine starts to
tumble the laundry periodically
a few minutes after programme
end. This tumbling will last up to
approximately 6 hours after end of
your wash programme. You can stop
it at any time by pressing any button;
the door unlocks and you can take
out your laundry.
TEMPERATURE
If you want to change the
temperature, press the temperature
button, turn the knob to select the
desired temperature and confirm it by
pressing the knob.
If you switch on the washing
machine, the last used programme
and temperature setting will appear
on the control panel.
If you change the programme, the
default temperature of the selected
programme will appear on the
display.
SPIN
If you want to change the spin speed,
press the Spin button, turn the knob
to select the desired spin speed and
press the knob to confirm.
If you select spin speed “0”, the rinse
water will be drained at the end of
the programme, and there will be no
final spin cycle.
If you switch on the washing
machine, the last used programme
and spin speed setting will appear on
the control panel.
If you change the programme, the
default spin speed of the selected
programme will appear on the
display.
26
EN
RINSE HOLD
To avoid automatic spinning of the
laundry at the end of the programme.
The laundry remains in the last rinse
water, the programme does not
proceed. The display indicates when
the washing machine has reached the
rinse hold.
Suitable for delicate laundry which
is not appropriate for spinning, or
which should be spun with a lower
spin speed.
Not appropriate for silk.
To terminate the “Rinse hold”, choose
between:
• draining the water, no spinning:
turn the knob to select spin speed
“0”, then press “Start/Pause”: the
water will be drained and the
programme ended
• spinning the laundry:
the default spin speed blinks - start
the spin cycle by pressing “Start/
Pause”. Or select a different spin
speed by turning the knob, press it
to confirm, and press Start/Pause”
to start the spin cycle
27
FUNCTIONS
ON/OFF
To switch on the washing machine:
press the button until the Start/Pause
button lights up.
To switch off the washing machine
after programme end:
press the key until the lights go off.
To cancel a running programme:
press and hold the button until the
display indicates that the programme
is cancelled; the washing machine
will perform a drain cycle to end the
program.
KNOB
• To select and confirm programmes
and options
• Turn to select
• Push to confirm
START/PAUSE
• To start the programme, after you
have finished your settings
• To pause a running programme
• To continue a paused programme
KEY LOCK
This function allows you to lock the
buttons and the knob of the control
panel against unwanted operation,
for example by small children.
Knob and buttons are locked now.
The only working function is “On/
Off” to switch the washing machine
off. – The key lock will remain active
also if you switch off and on again the
washing machine.
The washing machine must be
switched on.
Press and hold the option
button for at least 3 seconds;
the display indicates that the
keys are locked.
28
To unlock the buttons/knob, press
and hold the option button again for
at least 3 seconds, until the display
indicates that the keys are unlocked.
EN
AUTO DOSING
1
See separate section Auto dosing –
first use / daily use.
2
FINISH IN
Moves the end of your programme
to a later time. Helps to profit from
more favourable energy rates (for
example during the night), or to have
the laundry ready at a certain time.
Do not use liquid detergent with this
function.
Choose a delay up to 23:30 hours.
• Select programme, temperature
and options.
• Press the “Finish in” button –
the symbol over the button
blinks.
• Turn the knob to select a delay up
to 23:30 hours, which will be shown
on the display. Confirm the desired
delay by pressing the knob. The
symbol over the finish in button
lights up solidly.
SETTINGS
The following settings can be
changed:
Language (= display language) /
key tones / cycle end alert / display
contrast / water hardness / dosing
aid (adjust dosing amounts for the
detergents you use) / eco mode
(automatic switch-off function after
programme end) / factory settings (=
return to factory settings).
• Press and hold the Programme
button for at least 3 seconds.
• When you have finished your
settings, press “Start / Pause”
– the light over the button
lights up solidly. The display shows
the countdown of the time until
end of the programme. The door
locks.
• After the delay phase, the
programme starts automatically.
The display then indicates the
remaining programme duration.
To cancel the delay
• either press “Start/Pause” to cancel
the delay; to start the selected
programme immediately, press
“Start/Pause” again
• or press and hold “On/Off” to cancel
the complete programme setting.
• Turn the knob to select the setting
which you want to change; it
appears on the display. Confirm it
by pressing the knob.
• Turn the knob to adjust the setting;
confirm by pressing the knob.
• To exit the Settings mode, either
turn the knob until the display
indicates that you can exit – then
confirm by pressing the knob. Or
alternatively press the Programme
button.
29
INDICATORS
DOOR CAN
BE OPENED
30
This indicator will light
• before you have started a programme
• when you have paused a programme and the water level is not
too high, or the laundry is not too hot in that programme phase
• when a programme is finished and the laundry can be unloaded
ENERGY /
WATER
MONITOR
Gives feedback about the energy and water consumption of
your programme setting. The less indicators light up, the more
economic is your programme setting. Can still adapt after sensing
phase of laundry load.
DESCALING
A display message will remind you regularly to descale the
washing machine. Find descaler appropriate for the washing
machine (WPRO) on wpro.eu
To cancel the display reminder, press the knob.
FAILURE:
Refer to the Troubleshooting section for more information.
AUTO DOSING FUNCTION: AUTOMATIC
DOSING OF DETERGENT / FABRIC SOFTENER
Automatic dosing:
1. Tank 1
• Liquid generic detergent
OR
• Liquid specific detergent
Maximum filling quantity: 600 ml
2. Tank 2
• Fabric softener
OR
• Liquid detergent (generic or specific detergent
such as colour, wool or sport detergent)
EN
Automatically dispenses liquid detergents and
fabric softener (if needed) from the tanks of the
detergent dispenser. To enable a correct dosage,
this function needs to be set up as mentioned in
section AUTO DOSING / FIRST USE.
IMPORTANT:
• Never fill the tanks with powder detergents;
powder detergent can only be used with manual
dosing (see section DETERGENT DISPENSER).
• Fabric softener can be used with automatic
dosing in Tank 2 only; manual dosing of softener
is not possible.
Maximum filling quantity: 400 ml.
2
1
1
r
ne
fte
So
2
31
AUTO DOSING / FIRST USE
Before you can use the Auto Dosing function, some
p reparatory steps are required.
1.
Set the correct water hardness level.
Correct detergent dosing depends - among
others – also on the hardness of your local water.
Hard water requires a higher dosage of detergent
than soft water. The water hardness saved in the
washing machine is set to “soft” when you buy it.
First identify the hardness of your local water,
either by internet, by contacting your local water
authorities or by using the water hardness test strip
delivered with the washing machine (if available).
If the hardness of your local water is not “soft”,
the water hardness level of the washing machine
needs to be adapted accordingly:
• Press and hold the Settings button until the
settings menu appears on the display.
• Select “Tank 2 content” from the menu indicated
on the display by turning the knob.
• Confirm by pressing the knob.
• Select detergent or fabric softener. Confirm by
pressing the knob.
• To exit the Settings mode, select the exit option
from the display menu, or just press the Settings
button again.
3.
er
n
fte
So
Customize the
tank labels.
The labels on the
tanks are reversible
and exchangeable.
They serve to
remind you the
content which you
decided to use for
the auto dosing
tanks.
2
32
By default, Tank 1 is set for a detergent (your main
detergent), and Tank 2 is set for fabric softener.
If you do not use fabric softener, set Tank 2 for
another detergent (for instance special detergent
such as wool, colour or sport detergent).
1
• Press and hold the Programme button to enter
into the settings mode.
• Select WATER HARDNESS by turning and pressing
the knob.
• Select the relevant water hardness level (soft,
medium or hard) by turning and pressing the
knob.
• Select EXIT to exit the settings mode by turning
and pressing the knob.
2. Set Tank 2 content.
EN
Arrange the labels according to one of the
following combinations which are technically
possible:
Tank 1 content
Tank 2 content
Main liquid detergent
and
Fabric softener
Main liquid detergent
and
Special liquid detergent
Special liquid detergent
and
Fabric softener
Main liquid detergent
and
Main liquid detergent
Special liquid detergent
and
Main liquid detergent
Example: if you do not use fabric softener, you can
fill Tank 2 with a special liquid detergent, e.g. for
Wool or Sport laundry. In this case you would fix
the label for the main detergent on Tank 1 and the
“Colors” label on Tank 2 (see section “Customizing
the tanks”).
lo
Co
rs
1
To remove a label, open the flap of the tank. Hold
the label on the outer edge, where the tank flap
has a small slot, and carefully remove it.
Attach the label onto the tank flap by first inserting
the small tab on the bottom edge of the label.
Afterwards press the label down into place.
r
ne
fte
So
2
MA
X
MA
X
rs
lo
Co
1
r
ne
fte
So
2
1
So
r
ne
fte
2
33
4. Set the dosing quantities for the tanks.
The concentration of detergents available on the
market differs considerably; for that reason, the
dosing values of the auto dosing function need to be
adapted to the detergent / fabric softener you use.
The washing machine comes with the following
dosage settings:
• 80 ml DETERGENT for Tank 1
• 30 ml FABRIC SOFTENER for Tank 2
First check the dosing recommendations of your
liquid detergent / fabric softener:
• For liquid detergent: identify the dosing
recommendation for medium water hardness
and medium soil level indicated on the detergent
bottle.
• For fabric softener: check the dosing amount
recommended on the fabric softener bottle.
If the identified dosing recommendations differ
from the preset dosage settings of the washing
machine, the dosing values for the auto dosing
system need to be adapted.
5.
Filling the tanks with detergents / fabric
softener
The tanks are now ready to be filled with detergent
/ fabric softener.
Observe that:
• the maximum filling quantity for Tank 1 is 600 ml
• the maximum filling quantity for Tank 2 is 400 ml
• fabric softener must not be filled into Tank 1
• never fill powder detergent into the tanks
Open the tank flap and carefully pour in the
detergent or fabric softener liquid. Do not exceed
the MAX mark.
MA
X
MA
X
• Press and hold the Settings button until the
display indicates that you have entered the
settings mode.
• Turn the knob to navigate to “10. CALIBRATION”,
and confirm by pressing the knob.
• To exit the settings menu, select “BACK “;
afterwards select and confirm “EXIT” . Or
alternatively wait a few seconds until the settings
menu will be exited automatically.
34
X
r
ne
fte
So
• Turn the knob to select the indicated dosing
value. Afterwards confirm the new dosing value; a
checkmark will appear next to it.
MA
2
• Turn the knob to select the Tank 1 “DETERGENT
….ml” or Tank 2 “FABRIC SOFTENER/DETERGENT
….ml “, and confirm by pressing the knob. The
display indicates the dosing value which is
presently saved for the Tank you have selected.
EN
Close the tank flap and push the detergent
dispenser back into the dispenser compartment.
The Auto dosing system is ready for use now
If you prefer dosing the detergent manually
and you do not want to use the Auto dosing
function.
You can permanently deactivate the function as
follows:
• To exit the settings menu, select “BACK “;
afterwards select and confirm “EXIT” . Or
alternatively wait a few seconds until the settings
menu will be exited automatically.
For manual detergent dosing, only use the manual
detergent dosing chamber (see section Detergent
Dispenser) – do not use the Tanks.
• Press and hold the Settings button until the
display indicates that you have entered the
settings mode.
• Turn the knob to select to navigate to “9. AUTO
DOSING”, and confirm by pressing the the knob.
• Turn the knob to select if you want the function
to be switched on or off, and confirm by pressing
the the knob.
35
AUTO DOSING / DAILY USE
Make sure that the detergent dispenser is
correctly inserted
If the detergent dispenser is not correctly inserted,
a programme cannot be started, and the display
indicates that the dispenser must be inserted. A
running programme will be interrupted when the
detergent dispenser is moved out of its correct
position; the programme needs to be restarted
after moving the detergent dispenser back into
correct position.
switched on, and also at the end of the programme.
In addition, the corresponding tank button light
blinks a few times. When this message appears
for the first time, the supply in the indicated tank
is usually sufficient for about two or three more
programmes.
To refill detergent: Open the flap of the respective
tank and carefully pour in detergent (or fabric
softener, if Tank 2 is set for fabric softener).
Take care not to exceed the MAX level mark
when pouring in detergent or fabric softener.
Make sure that auto dosing is activated
When setting a programme, the auto dosing
buttons on the control panel are activated by
default (unless you have permanently deactivated
the auto dosing function – see section FUNCTIONS
/ SETTINGS) – the buttons light up, which means
that auto dosing is activated for both tanks.
1
MA
X
MA
X
2
If you want the washing machine to dose detergent
/ fabric softener automatically, make sure that the
button of the respective tank lights up.
Deactivating the tanks
If, for instance,
• you want to use a special detergent for which the
tanks are not prepared,
• you do not want to add fabric softener to the
washing,
deactivate auto dosing for the respective tank by
simply pressing the corresponding tank button on
the control panel.
MAX
MA
X
MA
X
If you dose detergent manually,
• deactivate both tank buttons (if both tanks
contain detergent)
OR
• keep Tank 2 button activated if you want to add
fabric softener to the washing, or deactivate Tank
2 button if you do not want to add fabric softener
(provided Tank 2 contains fabric softener).
X
er
n
fte
So
36
MA
2
Supplies of detergent / fabric softener in the
tanks
When the supplies of detergent/fabric softener
in one of the tanks runs low, the display shows a
low level warning when the washing machine is
EN
SAVING TIPS
• Achieve the best use of energy, water, detergent
and time by using the recommended maximum
load size for the programmes, as indicated in the
programme chart.
• Do not exceed the detergent dosages indicated
in the detergents manufacturer’s instructions. Use
the Dosing Aid function; prepare this function as
indicated in “First use of the Dosing Aid function”.
• Use “Prewash” for heavily soiled laundry only.
• Pre-treat stains with stain remover or soak dried
in stains in water before washing to reduce the
necessity of a hot wash programme.
• Save energy by using a 60°C instead of a 95°C
wash programme or a 40°C instead of a 60°C
wash programme. For cotton laundry, prefer
using programme Eco Cotton
with 40°C or
60°C.
• Save energy and time by selecting a high spin
speed to reduce the water content in laundry
before using a tumble dryer.
• Use option Colours 15° for lightly soiled coloured
laundry; it saves energy for water heating.
37
CLEANING &
MAINTENANCE
WARNING
For any cleaning and maintenance, switch off
and unplug the washing machine.
Do not use flammable fluids to clean the
washing machine.
CLEANING THE OUTSIDE
OF THE WASHING MACHINE
Use a soft damp cloth to clean the outer parts of
the washing machine.
38
Do not use glass or general purpose cleaners,
scouring powder or similar to clean the control
panel – these substances might damage the
printing.
CHECKING THE WATER
SUPPLY HOSE
EN
Check the inlet hose regularly for brittleness
and cracks. If damaged, replace it by a new hose
available through our After-Sales Service or your
specialist dealer.
Depending on the hose type:
If the inlet hose has a transparent coating,
periodically check if the colour intensifies locally.
If yes, the hose may have a leak and should be
replaced.
For water stop hoses: check the small safety valve
inspection window (see arrow). If it is red, the water
stop function was triggered, and the hose must be
replaced by a new one.
For unscrewing this hose, press the release button
(if available) while unscrewing the hose.
39
CLEANING THE MESH FILTERS
IN THE WATER SUPPLY HOSE
1. Close water tap and screw off the inlet hose.
1
2
2.
Clean the mesh filter at the hose’s end
carefully with a fine brush.
4.
Insert the mesh filter again. Connect the inlet
hose to water tap and washing machine again. Do
not use a tool to connect the inlet hose. Open the
water tap and check that all connections are tight.
3.
Now unscrew the inlet hose on the back of the
washing machine by hand.
Pull out the mesh filter from the valve on the back
of the washing machine with pliers and carefully
clean it.
2
1
40
CLEANING THE DETERGENT
DISPENSER
1.
Remove the detergent dispenser by pressing
down the release button and pulling out the
detergent dispenser.
EN
4.
Carefully clean the parts under running water,
removing detergent or fabric softener residues.
Particularly take care not to damage the functional
parts on the reverse of the tank cover.
1
So
2
r
ne
fte
2. Carefully remove the cover from the detergent 5. Wipe the parts dry with a soft cloth.
dispenser. While removing it, take care of the
functional parts on the bottom side of the cover.
er
Soften
6.
3. OPTIONAL: If a tank still contains a good
Only if you have removed the rubber stoppers
to empty the tank content (step 3): Plug in the
rubber stoppers again. Make sure that they are
completely plugged in, to avoid that detergent
can escape accidentally.
quantity of detergent or fabric softener, this can
be collected for reuse. The two rubber stoppers
on the rear bottom of the detergent dispenser are
removable. If needed, remove the stopper and
collect the escaping detergent or fabric softener in
a container.
41
7.
Reassemble the detergent dispenser and
push it back into the dispenser compartment. Make
sure that it is pushed in completely; otherwise the
washing machine will not work.
1
So
r
ne
fte
2
42
EN
CLEANING THE WATER FILTER / DRAINING
RESIDUAL WATER
WARNING
Switch off and unplug the washing machine before
cleaning the water filter or draining residual water.
If you used a hot wash programme, wait until the
water has cooled down before draining any water.
1. Remove the plinth: Push the tabs left and right
to release the plinth and remove it.
Clean the water filter regularly, to avoid that
the water cannot drain after the wash due to
obstruction of the filter.
If the water cannot drain, the display indicates that
the water filter may be clogged.
Place a broad, flat container beneath the water
filter, to collect the drain water.
2. Container for drain water:
If your washing machine model has an emergency
drain hose:
Provide a flat container for the drain water. Remove
the emergency drain hose from the base of the
washing machine.
3. Drain the water:
If your washing machine model has an emergency
drain hose:
Remove the stopper at the end of the hose and
let the water flow into the container. When the
container is full with water, plug the stopper to
the hose end and empty the container. Repeat
this procedure until no more water flows out.
Afterwards firmly close the emergency drain hose
with the stopper and reinsert the hose in the
washing machine’s base.
If your washing machine model has no emergency
drain hose:
43
If your washing machine model has no emergency
drain hose:
Slowly turn the filter counterclockwise until water
flows out. Let the water flow out, without removing
the filter.
When the container is full, close the water filter by
turning it in clockwise. Empty the container. Repeat
this procedure until all the water has drained.
5.
Clean the water filter: remove residues in the
filter and clean it under running water.
6. Insert the water filter and reinstall the plinth:
4. Remove filter: Lay a cotton cloth beneath the
water filter, which can absorb a small amount of
rest water. Then remove the water filter by turning
it out anticlockwise.
Reinsert the water filter again by turning it in
clockwise direction. Make sure to turn it in as far
as it goes; the filter handle must be in vertical
position. To test water tightness of the water
filter, you can pour about 1 liter of water into the
detergent dispenser.
Then reinstall the plinth.
2
1
44
EN
TRANSPORT
AND HANDLING
WARNING
Never lift the washing machine by holding it at the
worktop.
1. Pull out the mains plug, and close the water
tap.
2.
Make sure that door and detergent dispenser
are properly closed.
4.
Refit the transport bolts. Follow the
instructions for removing the transport bolts in the
Installation Guide in reverse order.
Important: Do not transport the washing machine
without having fixed the transport bolts.
3.
Disconnect the inlet hose from the water tap,
and remove the drain hose from your draining
point. Remove all rest water from the hoses, and
fix them so that they cannot get damaged during
transport.
45
TROUBLESHOOTING
Your washing machine is equipped with various
automatic safety and feedback functions. They
enable failures and needed maintenance to be
detected and indicated accordingly.
These failures are frequently so minor that they can
be removed within a few minutes.
When a failure occurs, the sensing indicator in the
middle of the control panel may blink.
PROBLEM
POSSIBLE CAUSE
SOLUTION
Washing machine does not start,
no indicators are on
Not connected to mains
Insert plug into socket
Test function with a lamp, have
faulty part repaired
Power breakdown
The washing machine will
automatically continue when
power is available again
Door not properly closed
Push door to close it until it clicks
Washing machine does not start,
shut
although “Start/Pause” has been
pressed
Key lock is activated
Press the button with the key
symbol at least 3 seconds to
deactivate the key lock
The detergent dispenser is not
Completely push in the detergent
correctly inserted
dispenser into the dispenser
compartment
Rinse hold (= positon of spin
Terminate Rinse hold with draining
Washing machine stops during
the water or spinning the laundry
the programme, and “Start/Pause” button) is activated
(see “Rinse hold” – FUNCTIONS
blinks
AND OPTIONS).
Programme was interrupted,
Make sure door is closed.
maybe door has been opened
Press “Start/Pause” to proceed with
the programme
Safety system has been activated: Refer to paragraph “Failure
indicators”. Make sure that water
failure indicator lights up and/or
tap is open and inlet hose has no
display shows failure (F…); water
kinks.
tap might be closed
Inlet water pressure too low; mesh Make sure water tap is properly
Detergent dispenser contains
filter of the water supply hose may opened. Check mesh filters of
detergent residues after
inlet hose, see CLEANING AND
be blocked
programme end
MAINTENANCE / Cleaning the
mesh filters of the inlet hose
Washing machine vibrates during Transport bolts have not been
Remove transport bolts according
spinning
removed (!)
to the instructions in the
INSTALLATION GUIDE
Washing machine not standing
Adjust feet (INSTALLATION
level on all four feet
GUIDE). Make sure that washing
machine stands on level and firm
underground.
46
Socket or fuse does not function
EN
PROBLEM
POSSIBLE CAUSE
SOLUTION
Spin speed “0” blinks on control
panel and/or laundry still very wet
Unbalance of laundry load
prevented spin cycle, to protect
the washing machine
Spin result poor
Spin button was set to a low spin
speed.
If you want to spin the wet
laundry, add more laundry
items of different sizes and start
“Rinse&Spin” programme.
Avoid small laundry loads
consisting of few big, absorbent
pieces of laundry / wash different
sizes of articles in one load
Select and start “Spin” programme
with a higher spin speed (if
selectable).
See line above.
Unbalance during spinning
prevented final spin cycle.
Excessive foam formation
prevented spinning.
Start “Rinse&Spin” programme.
Avoid excessive detergent dosing.
Adjust and use the Dosing Aid
function.
Detergent residues on laundry
Too much powder detergent used Avoid detergent overdosing.
after wash
/ quality of detergent.
Brush out the fabric.
Use “Intensive Rinse” option (if
selectable).
Use liquid detergent / use special
detergent for black or dark laundry.
Programme phases without drum Standstill phases lasting up to
Washing machine stands still
movement.
about 2 minutes are normal in
during programme / programme
some wash programmes.
seems not to proceed / during
standstill, animation may appear
Excessive foam formation (maybe The programme continues
on display
automatically, as soon as the foam
by overdosage of detergent)
reduction is sufficient.
interrupted the programme. Can
be repeated several times until the If display shows Fod (=failure
overdosage), refer to table FAILURE
foam reduction is sufficient.
INDICATORS AND MESSAGES.
Under- or overvoltage of mains
Programme will automatically
might be detected.
continue as soon as the mains
voltage is in the proper range.
Washing machine adapts to factors Avoid small laundry loads with
Programme duration is longer or
shorter as initially indicated on the having an effect on duration, such absorbent, big pieces of laundry /
add articles of different sizes.
display / in the programme chart. as size of laundry load, excessive
Avoid detergent overdosing
foam formation, load unbalance,
– respect the dosing
prolonged heating time due to
recommendations of the detergent
low inlet water temperature etc..
manufacturer. Adjust and use the
When programme duration is
recalculated, an animation appears Dosing Aid function.
on the display.
47
PROBLEM
POSSIBLE CAUSE
SOLUTION
Door is locked, with or without
failure indication, and the
programme does not run.
Door is locked in case of power
breakdown.
Programme will continue
automatically as soon as the mains
is available again.
Programme will continue
automatically after the origin of the
standstill does not persist anymore.
See instructions for failure
“Service”: doorlock failure” / FdL /
F29 in section Failure indicators.
Call our After-Sales Service to
exchange the light bulb.
Drum light (if available) does not
work anymore.
Programme cannot be started;
display indicates that detergent
dispenser is not properly inserted.
Display indicates demo mode
48
Washing machine is in a standstill
(as described in previous section
“Washing machine stands still…).
Water level or temperature too
high, or electrical component
failure.
Light bulb needs to be replaced.
Detergent dispenser is not fully
inserted in the compartment; the
dispenser is not in contact with the
connection point at the end of the
compartment.
The washing machine's
demonstration mode destined for
trade partners has not been exited
after a demonstration
Carefully push the detergent
dispenser into the compartment as
far as it goes.
imultaneously press the second
button from the right and the
second button from the left
side on the control panel. The
demonstration mode will be
ended, and the washing machine
can be operated according to the
provided instructions.
EN
FAILURE INDICATORS AND MESSAGES
Below is a summary of possible failure causes and
solutions.
If the problem persists after having removed the
origin of the failure, press On/Off for at least three
seconds. If afterwards the failure indication still
Failure Indicator Display
lights up
message
Open water
tap
Water filter
clogged
Over
foaming
Load
unbalance
persists, close the water tap, switch off and unplug
the washing machine and contact our After-Sales
Service.
Possible Cause
Possible Solution
No or not sufficient water
supply
• Water tap closed
• Kinks in inlet hose
• Water tap pressure too
low
• Mesh filters in inlet hose
clogged
• Water inlet hose frozen
up
Open water tap.
Make sure there are no kinks in the inlet
hose
Make sure water pressure is sufficient
Clean mesh filters in inlet hose (CLEANING
AND MAINTENANCE).
Install washing machine at an ambient
temperature of at least 5°C.
After problem has been removed, press
Start/Pause. If problem persists, press On/
Off for at least 3 seconds.
Waste water is not
Check drain hose for kinks.
pumped out
Install washing machine at an ambient
• Kinks in drain hose
temperature of at least 5°C.
• Drain hose blocked or
Clean water filter as described in section
frozen up
CLEANING THE FILTER.
• Filter blocked
After problem has been removed, press
• Pump blocked
Start/Pause. If problem persists, press On/
Off for at least 3 seconds.
Excessive foam formation Start “Rinse&Spin” programme, with
(maybe by overdosage
option Intensive Rinse.
of detergent) interrupted Respect the dosing recommendations by
the programme. The
the detergent manufacturer.
interruption can be
Adjust and use the Dosing Aid function.
repeated several times
Make sure that the water filter is clean.
until the foam reduction
is sufficient.
Unbalance in laundry
If you want to spin the wet laundry, add
load prevented spin
more laundry items of different sizes and
cycle, to protect washing start “Rinse&Spin”.
machine
Avoid small laundry loads consisting of
few big, absorbent pieces of laundry. Wash
different sizes of articles in one load.
Indication on control panel
Possible Cause
Possible Solution
Door open indicator blinks
The door cannot lock
Firmly press the door in area of door lock,
to properly close it. Then press Start/Pause.
If the problem persists, press On/Off for at
least 3 seconds.
49
Failure indicator Display
lights up
message
FdL
(or F29)
Call Service
F24
Possible Cause
Possible Solution
The door cannot unlock.
Firmly press the door on the area of the
door lock, then press On/Off for at least 3
seconds.
If hot cycle is selected, wait until cool
down and press again On/Off for at least 3
seconds.
Switch on the washing machine. If failure
still appears, check and eventually remove
possible cause as indicated for failure
“Clean filter”. Then switch the washing
machine on again. If door does not unlock,
press On/Off for at least 3 seconds.
Too much laundry for a
programme with small
maximum load
If door still does not unlock, refer to
section “DOOR – HOW TO OPEN IT IN CASE
OF A FAILURE”. Before draining water /
opening the door, wait until the water has
cooled down (for hot wash programmes).
Select and start programme “Rinse and
Spin” to complete the interrupted wash
programme.
Do not overload the washing machine.
Respect the maximum load size of the
programmes indicated in the Programme
Chart.
Too much inlet water
Call Service
F02
Call Service
F04 to F99
50
Turn off the water tap. Press On/Off for at
least 3 seconds to drain the water; wait
until the drain phase has ended (End will
appear on display).
Turn on the water tap again. – If water
immediately flows into the washing
machine (without having started a
programme), there is a failure of an
electrical component. Close water tap,
switch off and unplug the washing
machine. Contact our After-Sales Service.
Water stop failure – water Press Start/Pause. If problem persists, press
leakage detected in
On/Off for at least 3 seconds. If failure
bottom tray.
persists, contact After-Sales Service.
Failure of an electrical
component
Press On/Off button for at least 3 seconds
to reset the failure. If problem persists,
switch off washing machine, close the
water tap and unplug it; call After-Sales
Service.
EN
DOOR – HOW TO OPEN IT IN CASE OF A
FAILURE, TO TAKE OUT YOUR LAUNDRY
(Available only on certain models)
Switch off the washing machine and unplug it.
Close the water tap.
Wait until the drum has stopped rotating.
Never open the door while the drum is in
motion.
Wait until water and laundry have cooled down
when washing with high temperatures.
Always drain the water before opening the
door, either by pressing and holding On/Off
until "rES" appears on the display, or by doing
it manually as described in section DRAINING
RESIDUAL WATER.
Before opening the door as described in below
section, refer to failure “Door is locked with or
without failure indication, and the programme
does not run”. The door may unlock by itself after
conditions like for example a power breakdown do
not persist anymore.
If you want to take out your laundry immediately,
first try to unlock the door as described in FAILURE
INDICATORS AND MESSAGES (FdL or F29). Only
if the door cannot be opened as described in the
section mentioned before, proceed as described
below.
In case of a power breakdown, the washing
machine will proceed where it was interrupted as
soon as power is available again.
If a failure occurs on the washing machine and the
door is locked, but you must take out your laundry:
1. First drain the residual water, as described in
4. Afterwards fix the strap again by firmly turning
section “Draining residual water”
2. Remove the screw with a screwdriver.
3. Then pull downwards the strap marked with
in the screw with the screwdriver.
5. Reinstall the plinth
“Door open”. You can now open the door and take
out your laundry.
51
AFTER-SALES
SERVICE
BEFORE CALLING
THE AFTER SALES SERVICE
1.
Check if you can solve the problem yourself by
consulting section
TROUBLESHOOTING GUIDE.
2. Switch the washing machine off and on again
to see if the failure persists.
IF AFTERWARDS THE FAILURE STILL OCCURS,
CONTACT THE AFTER SALES SERVICE
Call the number shown on the warranty booklet, or
follow the instructions on
website www.whirlpool.eu
Always indicate
• A brief description of the failure
• Washing machine model (see rating plate inside
door)
• Service number (on service sticker inside door;
number after “Service”)
• Your full address and telephone number.
For any repairs, use our authorized After Sales
Service, to ensure proper repairing and use of
original spare parts.
52
INSTALLATION
GUIDE
17 mm - 0,67 inch
12 mm - 0,47 inch
2.
xx
xx
xx
x xx
xx
x
1.
53
3.
4.
2 cm - 0,7 inch
54
xxxxxxx xxxxx
5.
6.
7.
55
8.
9.
max 2,5 cm
max 0,9 inch
1
10.
56
2
11.
12.
13.
57
14.
max 125 cm
49 inch
min 60 cm
24 inch
max 125 cm
49 inch
min 60 cm
24 inch
max 125 cm
49 inch
min 60 cm
24 inch
58
15.
IPX4
..............
xxxx xxxx xxxx
xx A
xxx V ~ xx Hz
W
D
V
E
Type D xxx
Whirlpool Europe s.r.l.
Viale G.Borghi 27
21025 Comerio - Italy
16.
59
EN
400011313558
Whirlpool® Registered trademark/TM Trademark of Whirlpool group of companies © Copyright Whirlpool Europe s.r.l. 2014. All rights reserved - http://www.whirlpool.eu
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising