Zanussi | ZITN641K | User manual | ZANUSSI ZITN641K User Manual

ZANUSSI ZITN641K User Manual
User Manual
GETTING
STARTED?
EASY.
ZITN641K
EN User Manual
Hob
SAFETY INFORMATION
Before the installation and use of the appliance, carefully read the
supplied instructions. The manufacturer is not responsible for any
injuries or damage that are the result of incorrect installation or
usage. Always keep the instructions in a safe and accessible
location for future reference.
CHILDREN AND VULNERABLE PEOPLE SAFETY
•
•
•
•
•
•
•
•
This appliance can be used by children aged from 8 years and
above and persons with reduced physical, sensory or mental
capabilities or lack of experience and knowledge if they have
been given supervision or instruction concerning the use of the
appliance in a safe way and understand the hazards involved.
Children between 3 and 8 years of age and persons with very
extensive and complex disabilities shall be kept away from the
appliance unless continuously supervised.
Children of less than 3 years of age should be kept away from
the appliance unless continuously supervised.
Do not let children play with the appliance.
Keep all packaging away from children and dispose of it
appropriately.
Keep children and pets away from the appliance when it
operates or when it cools down. Accessible parts may become
hot during use.
If the appliance has a child safety device, it should be activated.
Children shall not carry out cleaning and user maintenance of
the appliance without supervision.
GENERAL SAFETY
•
•
•
2
WARNING: The appliance and its accessible parts become hot
during use. Care should be taken to avoid touching heating
elements.
WARNING: Unattended cooking on a hob with fat or oil can be
dangerous and may result in fire.
NEVER try to extinguish a fire with water, but switch off the
appliance and then cover flame e.g. with a lid or a fire blanket.
•
•
•
•
•
•
•
•
•
•
CAUTION: The appliance must not be supplied through an
external switching device, such as a timer, or connected to a
circuit that is regularly switched on and off by a utility.
CAUTION: The cooking process has to be supervised. A short
term cooking process has to be supervised continuously.
WARNING: Danger of fire: Do not store items on the cooking
surfaces.
Metallic objects such as knives, forks, spoons and lids should
not be placed on the hob surface since they can get hot.
Do not use the appliance before installing it in the built-in
structure.
Do not use a steam cleaner to clean the appliance.
After use, switch off the hob element by its control and do not
rely on the pan detector.
If the glass ceramic surface / glass surface is cracked, switch
off the appliance and unplug it from the mains. In case the
appliance is connected to the mains directly using junction box,
remove the fuse to disconnect the appliance from power
supply. In either case contact the Authorised Service Centre.
If the supply cord is damaged, it must be replaced by the
manufacturer, an authorized Service or similarly qualified
persons in order to avoid a hazard.
WARNING: Use only hob guards designed by the manufacturer
of the cooking appliance or indicated by the manufacturer of
the appliance in the instructions for use as suitable or hob
guards incorporated in the appliance. The use of inappropriate
guards can cause accidents.
SAFETY INSTRUCTIONS
INSTALLATION
•
•
•
•
WARNING! Only a qualified person
must install this appliance.
•
WARNING! Risk of injury or damage
to the appliance.
•
Remove all the packaging.
Do not install or use a damaged appliance.
Follow the installation instructions supplied with
the appliance.
•
•
Keep the minimum distance from other
appliances and units.
Always take care when moving the appliance as
it is heavy. Always use safety gloves and
enclosed footwear.
Seal the cut surfaces with a sealant to prevent
moisture to cause swelling.
Protect the bottom of the appliance from steam
and moisture.
Do not install the appliance adjacent to a door
or under a window. This prevents hot cookware
3
•
•
•
•
falling from the appliance when the door or the
window is opened.
If the appliance is installed above drawers make
sure that the space, between the bottom of the
appliance and the upper drawer, is sufficient for
air circulation.
The bottom of the appliance can get hot. Make
sure to install a separation panel made from
plywood, kitchen carcass material or other nonflammable materials under the appliance to
prevent access to the bottom.
The separation panel has to cover the area
under the hob completely.
Make sure that the ventilation space of 2 mm,
between the worktop and the front of the below
unit, is free. The warranty does not cover
damages caused by the lack of an adequate
ventilation space.
ELECTRICAL CONNECTION
WARNING! Risk of fire and electric
shock.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
4
All electrical connections should be made by a
qualified electrician.
The appliance must be earthed.
Before carrying out any operation make sure
that the appliance is disconnected from the
power supply.
Make sure that the parameters on the rating
plate are compatible with the electrical ratings
of the mains power supply.
Make sure the appliance is installed correctly.
Loose and incorrect electricity mains cable or
plug (if applicable) can make the terminal
become too hot.
Use the correct electricity mains cable.
Do not let the electricity mains cable tangle.
Make sure that a shock protection is installed.
Use the strain relief clamp on the cable.
Make sure the mains cable or plug (if
applicable) does not touch the hot appliance or
hot cookware, when you connect the appliance
to the near sockets.
Do not use multi-plug adapters and extension
cables.
Make sure not to cause damage to the mains
plug (if applicable) or to the mains cable.
Contact our Authorised Service Centre or an
electrician to change a damaged mains cable.
The shock protection of live and insulated parts
must be fastened in such a way that it cannot be
removed without tools.
Connect the mains plug to the mains socket
only at the end of the installation. Make sure that
there is access to the mains plug after the
installation.
•
•
•
•
If the mains socket is loose, do not connect the
mains plug.
Do not pull the mains cable to disconnect the
appliance. Always pull the mains plug.
Use only correct isolation devices: line
protecting cut-outs, fuses (screw type fuses
removed from the holder), earth leakage trips
and contactors.
The electrical installation must have an isolation
device which lets you disconnect the appliance
from the mains at all poles. The isolation device
must have a contact opening width of minimum
3 mm.
USE
WARNING! Risk of injury, burns and
electric shock.
•
•
•
•
•
•
•
•
•
•
•
•
•
Remove all the packaging, labelling and
protective film (if applicable) before first use.
This appliance is for household use only.
Do not change the specification of this
appliance.
Make sure that the ventilation openings are not
blocked.
Do not let the appliance stay unattended during
operation.
Set the cooking zone to “off” after each use.
Do not rely on the pan detector.
Do not put cutlery or saucepan lids on the
cooking zones. They can become hot.
Do not operate the appliance with wet hands or
when it has contact with water.
Do not use the appliance as a work surface or
as a storage surface.
If the surface of the appliance is cracked,
disconnect immediately the appliance from the
power supply. This to prevent an electrical
shock.
Users with a pacemaker must keep a distance
of minimum 30 cm from the induction cooking
zones when the appliance is in operation.
When you place food into hot oil, it may splash.
WARNING! Risk of fire and explosion
•
•
•
Fats and oil when heated can release flammable
vapours. Keep flames or heated objects away
from fats and oils when you cook with them.
The vapours that very hot oil releases can cause
spontaneous combustion.
Used oil, that can contain food remnants, can
cause fire at a lower temperature than oil used
for the first time.
•
Do not put flammable products or items that are
wet with flammable products in, near or on the
appliance.
WARNING! Risk of damage to the
appliance.
•
•
•
•
•
•
•
•
Do not keep hot cookware on the control panel.
Do not put a hot pan cover on the glass surface
of the hob.
Do not let cookware boil dry.
Be careful not to let objects or cookware fall on
the appliance. The surface can be damaged.
Do not activate the cooking zones with empty
cookware or without cookware.
Do not put aluminium foil on the appliance.
Cookware made of cast iron, aluminium or with
a damaged bottom can cause scratches on the
glass / glass ceramic. Always lift these objects
up when you have to move them on the cooking
surface.
This appliance is for cooking purposes only. It
must not be used for other purposes, for
example room heating.
CARE AND CLEANING
• Clean the appliance regularly to prevent the
deterioration of the surface material.
•
•
•
•
Deactivate the appliance and let it cool down
before you clean it.
Disconnect the appliance from the electrical
supply before maintenance.
Do not use water spray and steam to clean the
appliance.
Clean the appliance with a moist soft cloth. Use
only neutral detergents. Do not use abrasive
products, abrasive cleaning pads, solvents or
metal objects.
SERVICE
• To repair the appliance contact the Authorised
Service Centre.
• Use original spare parts only.
DISPOSAL
WARNING! Risk of injury or
suffocation.
•
•
•
Contact your municipal authority for information
on how to discard the appliance correctly.
Disconnect the appliance from the mains
supply.
Cut off the mains electrical cable close to the
appliance and dispose of it.
INSTALLATION
WARNING! Refer to Safety chapters.
BEFORE THE INSTALLATION
Before you install the hob, write down the
information below from the rating plate. The rating
plate is on the bottom of the hob.
Serial number ...........................
BUILT-IN HOBS
Only use the built-in hobs after you assemble the
hob into correct built-in units and work surfaces
that align to the standards.
ASSEMBLY
min.
500mm
min.
50mm
CONNECTION CABLE
• For a single phase or two phase connection,
use the cable type: H05BB-F or H03V2V2-F
which withstands a temperature of 70 °C or
higher.
• To replace the damaged mains cable, use the
cable: H05BB-F or H03V2V2-F which
withstands a temperature of 70 °C or higher.
5
590
PROTECTION BOX
520
60
15*
490+1
560+1
min.
40
If the appliance is installed above a
drawer, the hob ventilation can warm
up the items stored in the drawer
during the cooking process.
If you use a protection box (an additional
accessory), the front airflow space of 2 mm and the
protective floor directly below the hob are not
necessary. The protection box accessory may not
be available in some countries. Please contact your
local supplier.
You can not use the protection box if
you install the hob above an oven.
PRODUCT DESCRIPTION
COOKING SURFACE LAYOUT
1
1
1
2
6
1 Induction cooking zone
2 Control panel
1
CONTROL PANEL LAYOUT
1
2
3
4
5
Use the sensor fields to operate the appliance. The displays, indicators and sounds tell which functions
operate.
Sensor
field
Function
Comment
1
ON / OFF
To activate and deactivate the hob.
2
Lock / Child Safety Device
To lock / unlock the control panel.
3
-
To select the cooking zone.
Heat setting display
To show the heat setting.
-
To set a heat setting.
-
4
/
5
HEAT SETTING DISPLAYS
Display
Description
The cooking zone is deactivated.
The cooking zone operates.
-
PowerBoost operates.
+ digit
There is a malfunction.
A cooking zone is still hot (residual heat).
Lock / Child Safety Device operates.
Incorrect or too small cookware or no cookware on the cooking zone.
Automatic Switch Off operates.
RESIDUAL HEAT INDICATOR
WARNING!
There is a risk of
burns from residual heat.
The indicators show the level of the residual heat
for the cooking zones you are currently using. The
indicators may also come on for the neighbouring
cooking zones even if you are not using them.
7
The induction cooking zones produce the heat
necessary for the cooking process directly in the
bottom of the cookware. The glass ceramic is
heated by the heat of the cookware.
DAILY USE
WARNING! Refer to Safety chapters.
ACTIVATING AND DEACTIVATING
Touch
hob.
for 1 second to activate or deactivate the
AUTOMATIC SWITCH OFF
The function deactivates the hob
automatically if:
• all cooking zones are deactivated,
• you do not set the heat setting after you activate
the hob,
• you spill something or put something on the
control panel for more than 10 seconds (a pan,
a cloth, etc.). An acoustic signal sounds and the
hob deactivates. Remove the object or clean the
control panel.
• the hob gets too hot (e.g. when a saucepan
boils dry). Let the cooking zone cool down
before you use the hob again.
•
•
you use incorrect cookware. The symbol
comes on and the cooking zone deactivates
automatically after 2 minutes.
you do not deactivate a cooking zone or change
the heat setting. After some time
comes on
and the hob deactivates.
The relation between the heat setting and the
time after which the hob deactivates:
Heat setting
The hob deactivates
after
6 hours
,1-2
3-4
5 hours
5
4 hours
6-9
1.5 hour
SELECTING THE COOKING ZONE
To select a cooking zone touch the sensor field
corresponding to this zone. The display shows the
heat setting (
8
).
You can use the left rear zone to prepare your
favourite coffee. Make sure you use a moka pot
suitable for induction hobs.
THE HEAT SETTING
Set the cooking zone.
Touch
to increase the heat setting. Touch
decrease the heat setting. Touch
and
same time to deactivate the cooking zone.
to
at the
POWERBOOST
This function makes more power available to the
induction cooking zones. The function can be
activated for the induction cooking zone only for a
limited period of time. After this time the induction
cooking zone automatically sets back to the highest
heat setting.
Refer to “Technical data” chapter.
To activate the function for a cooking zone:
first set the cooking zone and than set the maximum
heat setting. Touch
until
comes on.
.
To deactivate the function: touch
LOCK
You can lock the control panel while cooking zones
operate. It prevents an accidental change of the
heat setting.
Set the heat setting first.
To activate the function: touch
for 4 seconds.
.
To deactivate the function: touch
previous heat setting comes on.
comes on
. The
When you deactivate the hob, you also
deactivate this function.
CHILD SAFETY DEVICE
This function prevents an accidental operation of
the hob.
To activate the function: activate the hob with
. Do not set any heat setting. Touch
for 4
seconds.
comes on. Deactivate the hob with
.
To deactivate the function: activate the hob with
. Do not set any heat setting. Touch
seconds.
for 4
comes on. Deactivate the hob with
.
To override the function for only one cooking
time: activate the hob with
.
comes on.
•
•
•
The function activates when the total electricity
loading of the cooking zones connected to a
single phase exceeds 3300 W.
The function decreases the power to the other
cooking zones connected to the same phase.
The heat setting display of the reduced zones
alternates between the chosen heat setting and
the reduced heat setting. After some time the
heat setting display of the reduced zones stays
on the reduced heat setting.
Touch
for 4 seconds. Set the heat setting in
10 seconds. You can operate the hob. When you
deactivate the hob with
again.
the function operates
POWER MANAGEMENT
• Cooking zones are grouped according to the
location and number of the phases in the hob.
See the illustration.
• Each phase has a maximum electricity loading of
3300 W.
• The function divides the power between
cooking zones connected to the same phase.
HINTS AND TIPS
WARNING! Refer to Safety chapters.
COOKWARE
For induction cooking zones a strong
electro-magnetic field creates the heat
in the cookware very quickly.
Use the induction cooking zones with
suitable cookware.
Cookware material
• correct: cast iron, steel, enamelled steel,
stainless steel, multi-layer bottom (with a correct
marking from a manufacturer).
• not correct: aluminium, copper, brass, glass,
ceramic, porcelain.
Cookware is suitable for an induction hob if:
• water boils very quickly on a zone set to the
highest heat setting.
• a magnet pulls on to the bottom of the
cookware.
The bottom of the cookware must be
as thick and flat as possible.
Ensure pan bases are clean and dry
before placing on the hob surface.
Cookware dimensions
Induction cooking zones adapt to the dimension of
the bottom of the cookware automatically.
The cooking zone efficiency is related to the
diameter of the cookware. The cookware with a
diameter smaller than the minimum receives only a
part of the power generated by the cooking zone.
Refer to "Technical data".
THE NOISES DURING OPERATION
If you can hear:
• crack noise: cookware is made of different
materials (a sandwich construction).
• whistle sound: you use a cooking zone with a
high power level and the cookware is made of
different materials (a sandwich construction).
• humming: you use a high power level.
• clicking: electric switching occurs.
• hissing, buzzing: the fan operates.
9
The noises are normal and do not indicate
any malfunction.
EXAMPLES OF COOKING APPLICATIONS
The correlation between the heat setting of a zone
and its consumption of power is not linear. When
you increase the heat setting, it is not proportional
Heat setting
to the increase of the consumption of power. It
means that a cooking zone with the medium heat
setting uses less than a half of its power.
The data in the table is for guidance
only.
Time
(min)
Use to:
Hints
Keep cooked food warm.
as necessary
Put a lid on the cookware.
1-2
Hollandaise sauce, melt: butter,
chocolate, gelatine.
5 - 25
Mix from time to time.
1-2
Solidify: fluffy omelettes, baked
eggs.
10 40
Cook with a lid on.
2-3
Simmer rice and milkbased
dishes, heat up ready-cooked
meals.
25 50
Add at least twice as much liquid
as rice, mix milk dishes halfway
through the procedure.
3-4
Steam vegetables, fish, meat.
20 45
Add a couple of tablespoons of
liquid.
4-5
Steam potatoes.
20 60
Use max. ¼ l of water for 750 g
of potatoes.
4-5
Cook larger quantities of food,
stews and soups.
60 150
Up to 3 l of liquid plus ingredients.
6-7
Gentle fry: escalope, veal cordon
bleu, cutlets, rissoles, sausages,
liver, roux, eggs, pancakes,
doughnuts.
as necessary
Turn halfway through.
7-8
Heavy fry, hash browns, loin
steaks, steaks.
5 - 15
Turn halfway through.
9
Boil water, cook pasta, sear meat (goulash, pot roast), deep-fry chips.
-1
Boil large quantities of water. PowerBoost is activated.
CARE AND CLEANING
WARNING! Refer to Safety chapters.
•
•
GENERAL INFORMATION
• Clean the hob after each use.
• Always use cookware with a clean base.
• Scratches or dark stains on the surface have no
effect on how the hob operates.
10
Use a special cleaner suitable for the surface of
the hob.
Use a special scraper for the glass.
CLEANING THE HOB
• Remove immediately: melted plastic, plastic
foil, sugar and food with sugar, otherwise, the
dirt can cause damage to the hob. Take care to
avoid burns. Use a special hob scraper on the
•
glass surface at an acute angle and move the
blade on the surface.
Remove when the hob is sufficiently cool:
limescale rings, water rings, fat stains, shiny
metallic discoloration. Clean the hob with a
moist cloth and a non-abrasive detergent. After
cleaning, wipe the hob dry with a soft cloth.
•
Remove shiny metallic discoloration: use a
solution of water with vinegar and clean the
glass surface with a cloth.
TROUBLESHOOTING
WARNING! Refer to Safety chapters.
WHAT TO DO IF...
Problem
You cannot activate or operate
the hob.
Possible cause
Remedy
The hob is not connected to an
electrical supply or it is connected incorrectly.
Check if the hob is correctly
connected to the electrical
supply. Refer to the connection
diagram.
The fuse is blown.
Make sure that the fuse is the
cause of the malfunction. If the
fuse is blown again and again,
contact a qualified electrician.
You do not set the heat setting
for 10 seconds.
Activate the hob again and set
the heat setting in less than 10
seconds.
You touched 2 or more sensor
fields at the same time.
Touch only one sensor field.
There is water or fat stains on
the control panel.
Clean the control panel.
An acoustic signal sounds and
the hob deactivates.
An acoustic signal sounds
when the hob is deactivated.
You put something on one or
more sensor fields.
Remove the object from the
sensor fields.
The hob deactivates.
You put something on the sen-
Remove the object from the
sensor field.
sor field
.
Residual heat indicator does
not come on.
The zone is not hot because it
operated only for a short time
or the sensor is damaged.
If the zone operated sufficiently
long to be hot, speak to an Authorised Service Centre.
The heat setting changes between two levels.
Power management operates.
Refer to "Daily use".
The sensor fields become hot.
The cookware is too large or
you put it too near to the controls.
Put large cookware on the rear
zones if possible.
11
Problem
Possible cause
Remedy
comes on.
Automatic Switch Off operates.
Deactivate the hob and activate it again.
comes on.
Child Safety Device or Lock
operates.
Refer to "Daily use".
comes on.
There is no cookware on the
zone.
Put cookware on the zone.
The cookware is unsuitable.
Use suitable cookware. Refer
to "Hints and tips".
The diameter of the bottom of
the cookware is too small for
the zone.
Use cookware with correct dimensions. Refer to "Technical
data".
There is an error in the hob.
Deactivate the hob and activate it again after 30 seconds.
and a number come on.
If
comes on again, disconnect the hob from the electrical
supply. After 30 seconds, connect the hob again. If the problem continues, speak to an Authorised Service Centre.
You can hear a constant beep
noise.
The electrical connection is incorrect.
IF YOU CANNOT FIND A SOLUTION...
If you cannot find a solution to the problem yourself,
contact your dealer or an Authorised Service
Centre. Give the data from the rating plate. Give
also three digit letter code for the glass ceramic (it
is in the corner of the glass surface) and an error
message that comes on. Make sure, you operated
Disconnect the hob from the
electrical supply. Ask a qualified electrician to check the installation.
the hob correctly. If not the servicing by a service
technician or dealer will not be free of charge, also
during the warranty period. The instructions about
the Service Centre and conditions of guarantee are
in the guarantee booklet.
TECHNICAL DATA
RATING PLATE
Model ZITN641K
Typ 60 GAP D5 AU
Induction 6.6 kW
Ser.Nr. .................
ZANUSSI
12
PNC 949 492 383 00
220 - 240 V / 400 V 2N 50 - 60 Hz
Made in Romania
6.6 kW
COOKING ZONES SPECIFICATION
Cooking zone
Nominal power
(maximum heat
setting) [W]
PowerBoost [W]
PowerBoost maxiCookware diamemum duration
ter [mm]
[min]
Left front
2300
2800
10
180 - 210
Left rear
1200
-
-
125 - 145
Right front
1200
1800
4
125 - 145
Right rear
1800
-
-
145 - 180
The power of the cooking zones can be different in
some small range from the data in the table. It
changes with the material and dimensions of the
cookware.
For optimal cooking results use cookware no larger
than the diameter in the table.
ENERGY EFFICIENCY
PRODUCT INFORMATION ACCORDING TO EU 66/2014 VALID FOR EU MARKET ONLY
Model identification
ZITN641K
Type of hob
Built-In Hob
Number of cooking zones
4
Heating technology
Induction
Diameter of circular cooking
zones (Ø)
Left front
Left rear
Right front
Right rear
21.0 cm
14.5 cm
14.5 cm
18.0 cm
Energy consumption per
cooking zone (EC electric
cooking)
Left front
Left rear
Right front
Right rear
190.1 Wh / kg
181.0 Wh / kg
180.1 Wh / kg
183.8 Wh / kg
Energy consumption of the
hob (EC electric hob)
183.8 Wh / kg
EN 60350-2 - Household electric cooking
appliances - Part 2: Hobs - Methods for measuring
performance
•
ENERGY SAVING
You can save energy during everyday cooking if you
follow below hints.
• When you heat up water, use only the amount
you need.
• If it is possible, always put the lids on the
cookware.
•
•
•
Before you activate the cooking zone put the
cookware on it.
Put the smaller cookware on the smaller cooking
zones.
Put the cookware directly in the centre of the
cooking zone.
Use the residual heat to keep the food warm or
to melt it.
13
ENVIRONMENTAL CONCERNS
with the symbol with the household waste.
Return the product to your local recycling facility or
contact your municipal office.
Recycle materials with the symbol
. Put the
packaging in relevant containers to recycle it. Help
protect the environment and human health by
recycling waste of electrical and electronic
appliances. Do not dispose of appliances marked
14
*
15
867357288-A-422019
WWW.ZANUSSI.COM/SHOP
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising