Zanussi | ZIFN844K | User manual | ZANUSSI ZIFN844K User Manual

ZANUSSI ZIFN844K User Manual
User Manual
GETTING
STARTED?
EASY.
ZIFN844K
EN User Manual
Hob
SAFETY INFORMATION
Before the installation and use of the appliance, carefully read the
supplied instructions. The manufacturer is not responsible for any
injuries or damage that are the result of incorrect installation or
usage. Always keep the instructions in a safe and accessible
location for future reference.
CHILDREN AND VULNERABLE PEOPLE SAFETY
•
•
•
•
•
•
•
•
This appliance can be used by children aged from 8 years and
above and persons with reduced physical, sensory or mental
capabilities or lack of experience and knowledge if they have
been given supervision or instruction concerning the use of the
appliance in a safe way and understand the hazards involved.
Children between 3 and 8 years of age and persons with very
extensive and complex disabilities shall be kept away from the
appliance unless continuously supervised.
Children of less than 3 years of age should be kept away from
the appliance unless continuously supervised.
Do not let children play with the appliance.
Keep all packaging away from children and dispose of it
appropriately.
Keep children and pets away from the appliance when it
operates or when it cools down. Accessible parts may become
hot during use.
If the appliance has a child safety device, it should be activated.
Children shall not carry out cleaning and user maintenance of
the appliance without supervision.
GENERAL SAFETY
•
•
•
2
WARNING: The appliance and its accessible parts become hot
during use. Care should be taken to avoid touching heating
elements.
WARNING: Unattended cooking on a hob with fat or oil can be
dangerous and may result in fire.
NEVER try to extinguish a fire with water, but switch off the
appliance and then cover flame e.g. with a lid or a fire blanket.
•
•
•
•
•
•
•
•
•
•
CAUTION: The appliance must not be supplied through an
external switching device, such as a timer, or connected to a
circuit that is regularly switched on and off by a utility.
CAUTION: The cooking process has to be supervised. A short
term cooking process has to be supervised continuously.
WARNING: Danger of fire: Do not store items on the cooking
surfaces.
Metallic objects such as knives, forks, spoons and lids should
not be placed on the hob surface since they can get hot.
Do not use the appliance before installing it in the built-in
structure.
Do not use a steam cleaner to clean the appliance.
After use, switch off the hob element by its control and do not
rely on the pan detector.
If the glass ceramic surface / glass surface is cracked, switch
off the appliance and unplug it from the mains. In case the
appliance is connected to the mains directly using junction box,
remove the fuse to disconnect the appliance from power
supply. In either case contact the Authorised Service Centre.
If the supply cord is damaged, it must be replaced by the
manufacturer, an authorized Service or similarly qualified
persons in order to avoid a hazard.
WARNING: Use only hob guards designed by the manufacturer
of the cooking appliance or indicated by the manufacturer of
the appliance in the instructions for use as suitable or hob
guards incorporated in the appliance. The use of inappropriate
guards can cause accidents.
SAFETY INSTRUCTIONS
INSTALLATION
•
•
•
•
WARNING! Only a qualified person
must install this appliance.
•
WARNING! Risk of injury or damage
to the appliance.
•
Remove all the packaging.
Do not install or use a damaged appliance.
Follow the installation instructions supplied with
the appliance.
•
•
Keep the minimum distance from other
appliances and units.
Always take care when moving the appliance as
it is heavy. Always use safety gloves and
enclosed footwear.
Seal the cut surfaces with a sealant to prevent
moisture to cause swelling.
Protect the bottom of the appliance from steam
and moisture.
Do not install the appliance adjacent to a door
or under a window. This prevents hot cookware
3
•
•
•
falling from the appliance when the door or the
window is opened.
Each appliance has cooling fans on the bottom.
If the appliance is installed above a drawer:
– Do not store any small pieces or sheets of
paper that could be pulled in, as they can
damage the cooling fans or impair the
cooling system.
– Keep a distance of minimum 2 cm between
the bottom of the appliance and parts
stored in the drawer.
Remove any separator panels installed in the
cabinet below the appliance.
ELECTRICAL CONNECTION
WARNING! Risk of fire and electric
shock.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
4
All electrical connections should be made by a
qualified electrician.
The appliance must be earthed.
Before carrying out any operation make sure
that the appliance is disconnected from the
power supply.
Make sure that the parameters on the rating
plate are compatible with the electrical ratings
of the mains power supply.
Make sure the appliance is installed correctly.
Loose and incorrect electricity mains cable or
plug (if applicable) can make the terminal
become too hot.
Use the correct electricity mains cable.
Do not let the electricity mains cable tangle.
Make sure that a shock protection is installed.
Use the strain relief clamp on the cable.
Make sure the mains cable or plug (if
applicable) does not touch the hot appliance or
hot cookware, when you connect the appliance
to the near sockets.
Do not use multi-plug adapters and extension
cables.
Make sure not to cause damage to the mains
plug (if applicable) or to the mains cable.
Contact our Authorised Service Centre or an
electrician to change a damaged mains cable.
The shock protection of live and insulated parts
must be fastened in such a way that it cannot be
removed without tools.
Connect the mains plug to the mains socket
only at the end of the installation. Make sure that
there is access to the mains plug after the
installation.
If the mains socket is loose, do not connect the
mains plug.
Do not pull the mains cable to disconnect the
appliance. Always pull the mains plug.
•
•
Use only correct isolation devices: line
protecting cut-outs, fuses (screw type fuses
removed from the holder), earth leakage trips
and contactors.
The electrical installation must have an isolation
device which lets you disconnect the appliance
from the mains at all poles. The isolation device
must have a contact opening width of minimum
3 mm.
USE
WARNING! Risk of injury, burns and
electric shock.
•
•
•
•
•
•
•
•
•
•
•
•
•
Remove all the packaging, labelling and
protective film (if applicable) before first use.
This appliance is for household use only.
Do not change the specification of this
appliance.
Make sure that the ventilation openings are not
blocked.
Do not let the appliance stay unattended during
operation.
Set the cooking zone to “off” after each use.
Do not rely on the pan detector.
Do not put cutlery or saucepan lids on the
cooking zones. They can become hot.
Do not operate the appliance with wet hands or
when it has contact with water.
Do not use the appliance as a work surface or
as a storage surface.
If the surface of the appliance is cracked,
disconnect immediately the appliance from the
power supply. This to prevent an electrical
shock.
Users with a pacemaker must keep a distance
of minimum 30 cm from the induction cooking
zones when the appliance is in operation.
When you place food into hot oil, it may splash.
WARNING! Risk of fire and explosion
•
•
•
•
Fats and oil when heated can release flammable
vapours. Keep flames or heated objects away
from fats and oils when you cook with them.
The vapours that very hot oil releases can cause
spontaneous combustion.
Used oil, that can contain food remnants, can
cause fire at a lower temperature than oil used
for the first time.
Do not put flammable products or items that are
wet with flammable products in, near or on the
appliance.
WARNING! Risk of damage to the
appliance.
•
•
•
•
•
•
•
•
Do not keep hot cookware on the control panel.
Do not put a hot pan cover on the glass surface
of the hob.
Do not let cookware boil dry.
Be careful not to let objects or cookware fall on
the appliance. The surface can be damaged.
Do not activate the cooking zones with empty
cookware or without cookware.
Do not put aluminium foil on the appliance.
Cookware made of cast iron, aluminium or with
a damaged bottom can cause scratches on the
glass / glass ceramic. Always lift these objects
up when you have to move them on the cooking
surface.
This appliance is for cooking purposes only. It
must not be used for other purposes, for
example room heating.
CARE AND CLEANING
• Clean the appliance regularly to prevent the
deterioration of the surface material.
• Deactivate the appliance and let it cool down
before you clean it.
•
•
•
Disconnect the appliance from the electrical
supply before maintenance.
Do not use water spray and steam to clean the
appliance.
Clean the appliance with a moist soft cloth. Use
only neutral detergents. Do not use abrasive
products, abrasive cleaning pads, solvents or
metal objects.
SERVICE
• To repair the appliance contact the Authorised
Service Centre.
• Use original spare parts only.
DISPOSAL
WARNING! Risk of injury or
suffocation.
•
•
•
Contact your municipal authority for information
on how to discard the appliance correctly.
Disconnect the appliance from the mains
supply.
Cut off the mains electrical cable close to the
appliance and dispose of it.
INSTALLATION
WARNING! Refer to Safety chapters.
BEFORE THE INSTALLATION
Before you install the hob, write down the
information below from the rating plate. The rating
plate is on the bottom of the hob.
Serial number ...........................
BUILT-IN HOBS
Only use the built-in hobs after you assemble the
hob into correct built-in units and work surfaces
that align to the standards.
ASSEMBLY
min.
500mm
min.
50mm
CONNECTION CABLE
• For a single phase or two phase connection,
use the cable type: H05BB-F or H03V2V2-F
which withstands a temperature of 70 °C or
higher.
• To replace the damaged mains cable, use the
cable: H05BB-F or H03V2V2-F which
withstands a temperature of 70 °C or higher.
5
If the appliance is installed above a
drawer, the hob ventilation can warm
up the items stored in the drawer
during the cooking process.
PRODUCT DESCRIPTION
COOKING SURFACE LAYOUT
1 Induction cooking zone
2 Control panel
1
1
1
1
2
CONTROL PANEL LAYOUT
1
2
3
4
5
12
6
6
7
11
10
8
9
Use the sensor fields to operate the appliance. The displays, indicators and sounds tell which functions
operate.
Sensor
field
Function
Comment
1
ON / OFF
To activate and deactivate the hob.
2
Lock / Child Safety Device
To lock / unlock the control panel.
3
Pause
To activate and deactivate the function.
4
JoinZone
To activate and deactivate the function.
-
Heat setting display
To show the heat setting.
-
Timer indicators of cooking
zones
To show for which zone you set the time.
-
Timer display
To show the time in minutes.
Hob²Hood
To activate and deactivate the manual mode of
the function.
-
To select the cooking zone.
-
To increase or decrease the time.
PowerBoost
To activate the function.
Control bar
To set a heat setting.
5
6
7
8
9
/
10
11
-
12
HEAT SETTING DISPLAYS
Display
Description
The cooking zone is deactivated.
The cooking zone operates.
-
Pause operates.
Automatic Heat Up operates.
PowerBoost operates.
+ digit
There is a malfunction.
/
OptiHeat Control (3 step Residual heat indicator): continue cooking / keep
warm / residual heat.
/
Lock / Child Safety Device operates.
7
Display
Description
Incorrect or too small cookware or no cookware on the cooking zone.
Automatic Switch Off operates.
OPTIHEAT CONTROL (3 STEP RESIDUAL
HEAT INDICATOR)
WARNING!
/
/
There is a
risk of burns from residual heat.
The indicators show the level of the residual heat
for the cooking zones you are currently using. The
indicators may also come on for the neighbouring
cooking zones even if you are not using them.
The induction cooking zones produce the heat
necessary for the cooking process directly in the
bottom of the cookware. The glass ceramic is
heated by the heat of the cookware.
DAILY USE
WARNING! Refer to Safety chapters.
Heat setting
ACTIVATING AND DEACTIVATING
Touch
hob.
AUTOMATIC SWITCH OFF
The function deactivates the hob
automatically if:
• all cooking zones are deactivated,
• you do not set the heat setting after you activate
the hob,
• you spill something or put something on the
control panel for more than 10 seconds (a pan,
a cloth, etc.). An acoustic signal sounds and the
hob deactivates. Remove the object or clean the
control panel.
• the hob gets too hot (e.g. when a saucepan
boils dry). Let the cooking zone cool down
before you use the hob again.
•
•
you use incorrect cookware. The symbol
comes on and the cooking zone deactivates
automatically after 2 minutes.
you do not deactivate a cooking zone or change
the heat setting. After some time
comes on
and the hob deactivates.
The relation between the heat setting and the
time after which the hob deactivates:
8
,1-2
for 1 second to activate or deactivate the
The hob deactivates
after
6 hours
3-4
5 hours
5
4 hours
6-9
1.5 hour
THE HEAT SETTING
To set or change the heat setting:
Touch the control bar at the correct heat setting or
move your finger along the control bar until you
reach the correct heat setting.
JOINZONE
The function operates when the pot
covers the centres of the two zones.
This function connects two left side cooking zones
and they operate as one.
First set the heat setting for one of the left side
cooking zones.
To activate the function: touch . To set or
change the heat setting touch one of the control
sensors.
To deactivate the function: touch . The
cooking zones operate independently.
When you use only one cooking zone of the pair we
recommend that you use the rear cooking zone.
Also when you use large cookware we recommend
that you put it near to the rear cooking zone.
AUTOMATIC HEAT UP
Activate this function to get a desired heat setting
in a shorter time. When it is on, the zone operates
on the highest setting in the beginning and then
continues to cook at the desired heating setting.
To activate the function the cooking
zone must be cold.
To activate the function for a cooking zone:
touch
(
comes on). Immediately touch a
desired heat setting. After 3 seconds
comes on.
To deactivate the function: change the heat
setting.
POWERBOOST
This function makes more power available to the
induction cooking zones. The function can be
activated for the induction cooking zone only for a
limited period of time. After this time the induction
cooking zone automatically sets back to the highest
heat setting.
Refer to “Technical data” chapter.
To activate the function for a cooking zone:
touch
.
comes on.
To deactivate the function: change the heat
setting.
TIMER
Count Down Timer
You can use this function to set how long the
cooking zone should operate for a single cooking
session.
First set the heat setting for the cooking zone then
set the function.
again and
To set the cooking zone: touch
again until the indicator of a necessary cooking
zone comes on.
To activate the function or change the time:
or
of the timer to set the time (00 - 99
touch
minutes). When the indicator of the cooking zone
starts to flash slowly the time counts down.
To see the remaining time: set the cooking zone
with
. The indicator of the cooking zone starts to
flash quickly. The display shows the remaining time.
To deactivate the function: set the cooking zone
with
and touch
. The remaining time counts
back to 00. The indicator of the cooking zone goes
out.
When the time comes to an end, the
sound operates and 00 flashes. The
cooking zone deactivates.
To stop the sound: touch
Minute Minder
.
You can use this function as a Minute Minder
when the hob is activated and the cooking zones
do not operate. The heat setting display shows
To activate the function: touch
. Touch
.
or
of the timer to set the time. When the time
comes to an end, the sound operates and 00
flashes.
To stop the sound: touch
.
The function has no effect on the
operation of the cooking zones.
PAUSE
This function sets all cooking zones that operate to
the lowest heat setting.
When the function operates, all other symbols on
the control panels are locked.
The function does not stop the timer functions.
Touch
to activate the function.
comes on. The heat setting is lowered to 1.
To deactivate the function, touch
heat setting comes on.
. The previous
LOCK
You can lock the control panel while cooking zones
operate. It prevents an accidental change of the
heat setting.
Set the heat setting first.
To activate the function: touch
for 4 seconds. The Timer stays on.
.
comes on
9
To deactivate the function: touch
previous heat setting comes on.
. The
When you deactivate the hob, you also
deactivate this function.
CHILD SAFETY DEVICE
This function prevents an accidental operation of
the hob.
To activate the function: activate the hob with
. Do not set any heat setting. Touch
seconds.
for 4
comes on. Deactivate the hob with
.
To deactivate the function: activate the hob with
. Do not set any heat setting. Touch
seconds.
for 4
comes on. Deactivate the hob with
.
To override the function for only one cooking
time: activate the hob with
.
comes on.
Touch
for 4 seconds. Set the heat setting in
10 seconds. You can operate the hob. When you
deactivate the hob with
again.
the function operates
POWER MANAGEMENT
• Cooking zones are grouped according to the
location and number of the phases in the hob.
See the illustration.
• Each phase has a maximum electricity loading of
3700 W.
• The function divides the power between
cooking zones connected to the same phase.
•
• The function activates when the total electricity
loading of the cooking zones connected to a
single phase exceeds 3700 W.
• The function decreases the power to the other
cooking zones connected to the same phase.
• The heat setting display of the reduced zones
alternates between the chosen heat setting and
the reduced heat setting. After some time the
heat setting display of the reduced zones stays
on the reduced heat setting.
10
HOB²HOOD
It is an advanced automatic function which
connects the hob to a special hood. Both the hob
and the hood have an infrared signal communicator.
Speed of the fan is defined automatically on basis
of mode setting and temperature of the hottest
cookware on the hob. You can also operate the fan
from the hob manually.
For most of the hoods the remote
system is originally deactivated.
Activate it before you use the function.
For more information refer to hood
user manual.
Operating the function automatically
To operate the function automatically set the
automatic mode to H1 – H6. The hob is originally
set to H5. The hood reacts whenever you operate
the hob. The hob recognizes temperature of the
cookware automatically and adjusts the speed of
the fan.
Automatic modes
Automatic
Boiling1)
light
Frying2)
Mode
H0
Off
Off
Off
Mode
H1
On
Off
Off
Mode
H2 3)
On
Fan
speed 1
Fan
speed 1
Mode
H3
On
Off
Fan
speed 1
Mode
H4
On
Fan
speed 1
Fan
speed 1
Operating the fan speed manually
Automatic
Boiling1)
light
Mode
H5
On
Mode
H6
On
Frying2)
Fan
speed 1
Fan
speed 2
Fan
speed 2
Fan
speed 3
1) The hob detects the boiling process and activates fan speed in accordance with automatic
mode.
2) The hob detects the frying process and activates
fan speed in accordance with automatic mode.
3) This mode activates the fan and the light and
does not rely on the temperature.
Changing the automatic mode
1. Deactivate the appliance.
2. Touch
for 3 seconds. The display comes on
and goes off.
3. Touch
for 3 seconds.
4. Touch
a few times until
5. Touch
mode.
of the Timer to select an automatic
You can also operate the function manually. To do
that touch
when the hob is active. This
deactivates automatic operation of the function and
allows you to change the fan speed manually.
When you press
you raise the fan speed by one.
When you reach an intensive level and press
again you will set fan speed to 0 which deactivates
the hood fan. To start the fan again with fan speed
1 touch
.
To activate automatic operation of the
function, deactivate the hob and
activate it again.
Activating the light
You can set the hob to activate the light
automatically whenever you activate the hob. To do
so set the automatic mode to H1 – H6.
The light on the hood deactivates 2
minutes after deactivating the hob.
comes on.
To operate the hood directly on the
hood panel deactivate the automatic
mode of the function.
When you finish cooking and
deactivate the hob, the hood fan may
still operate for a certain period of
time. After that time the system
deactivates the fan automatically and
prevents you from accidental activation
of the fan for the next 30 seconds.
HINTS AND TIPS
WARNING! Refer to Safety chapters.
COOKWARE
For induction cooking zones a strong
electro-magnetic field creates the heat
in the cookware very quickly.
Use the induction cooking zones with
suitable cookware.
Cookware material
• correct: cast iron, steel, enamelled steel,
stainless steel, multi-layer bottom (with a correct
marking from a manufacturer).
• not correct: aluminium, copper, brass, glass,
ceramic, porcelain.
Cookware is suitable for an induction hob if:
• water boils very quickly on a zone set to the
highest heat setting.
• a magnet pulls on to the bottom of the
cookware.
11
The bottom of the cookware must be
as thick and flat as possible.
Ensure pan bases are clean and dry
before placing on the hob surface.
Cookware dimensions
Induction cooking zones adapt to the dimension of
the bottom of the cookware automatically.
The cooking zone efficiency is related to the
diameter of the cookware. The cookware with a
diameter smaller than the minimum receives only a
part of the power generated by the cooking zone.
Refer to "Technical data".
•
whistle sound: you use a cooking zone with a
high power level and the cookware is made of
different materials (a sandwich construction).
• humming: you use a high power level.
• clicking: electric switching occurs.
• hissing, buzzing: the fan operates.
The noises are normal and do not indicate
any malfunction.
EXAMPLES OF COOKING APPLICATIONS
The correlation between the heat setting of a zone
and its consumption of power is not linear. When
you increase the heat setting, it is not proportional
to the increase of the consumption of power. It
means that a cooking zone with the medium heat
setting uses less than a half of its power.
THE NOISES DURING OPERATION
If you can hear:
• crack noise: cookware is made of different
materials (a sandwich construction).
Heat setting
Time
(min)
Hints
Keep cooked food warm.
as necessary
Put a lid on the cookware.
1-2
Hollandaise sauce, melt: butter,
chocolate, gelatine.
5 - 25
Mix from time to time.
1-2
Solidify: fluffy omelettes, baked
eggs.
10 40
Cook with a lid on.
2-3
Simmer rice and milkbased
dishes, heat up ready-cooked
meals.
25 50
Add at least twice as much liquid
as rice, mix milk dishes halfway
through the procedure.
3-4
Steam vegetables, fish, meat.
20 45
Add a couple of tablespoons of
liquid.
4-5
Steam potatoes.
20 60
Use max. ¼ l of water for 750 g
of potatoes.
4-5
Cook larger quantities of food,
stews and soups.
60 150
Up to 3 l of liquid plus ingredients.
6-7
Gentle fry: escalope, veal cordon
bleu, cutlets, rissoles, sausages,
liver, roux, eggs, pancakes,
doughnuts.
as necessary
Turn halfway through.
7-8
Heavy fry, hash browns, loin
steaks, steaks.
5 - 15
Turn halfway through.
9
Boil water, cook pasta, sear meat (goulash, pot roast), deep-fry chips.
-1
12
Use to:
The data in the table is for guidance
only.
Heat setting
Time
(min)
Use to:
Hints
Boil large quantities of water. PowerBoost is activated.
HINTS AND TIPS FOR HOB²HOOD
When you operate the hob with the function:
• Protect the hood panel from direct sunlight.
• Do not spot halogen light on the hood panel.
• Do not cover the hob control panel.
• Do not interrupt the signal between the hob and
the hood (e.g. with the hand, a cookware handle
or a tall pot). See the picture.
The hood in the picture is only exemplary.
Other remotely controlled appliances
may block the signal. Do not use any
such appliances near to the hob while
Hob²Hood is on.
Cooker hoods with the Hob²Hood function
To find the full range of cooker hoods which work
with this function refer to our consumer website.
CARE AND CLEANING
WARNING! Refer to Safety chapters.
GENERAL INFORMATION
• Clean the hob after each use.
• Always use cookware with a clean base.
• Scratches or dark stains on the surface have no
effect on how the hob operates.
• Use a special cleaner suitable for the surface of
the hob.
• Use a special scraper for the glass.
•
•
dirt can cause damage to the hob. Take care to
avoid burns. Use a special hob scraper on the
glass surface at an acute angle and move the
blade on the surface.
Remove when the hob is sufficiently cool:
limescale rings, water rings, fat stains, shiny
metallic discoloration. Clean the hob with a
moist cloth and a non-abrasive detergent. After
cleaning, wipe the hob dry with a soft cloth.
Remove shiny metallic discoloration: use a
solution of water with vinegar and clean the
glass surface with a cloth.
CLEANING THE HOB
• Remove immediately: melted plastic, plastic
foil, sugar and food with sugar, otherwise, the
13
TROUBLESHOOTING
WARNING! Refer to Safety chapters.
WHAT TO DO IF...
Problem
You cannot activate or operate
the hob.
Possible cause
The hob is not connected to an
electrical supply or it is connected incorrectly.
Check if the hob is correctly
connected to the electrical
supply. Refer to the connection
diagram.
The fuse is blown.
Make sure that the fuse is the
cause of the malfunction. If the
fuse is blown again and again,
contact a qualified electrician.
You do not set the heat setting
for 10 seconds.
Activate the hob again and set
the heat setting in less than 10
seconds.
You touched 2 or more sensor
fields at the same time.
Touch only one sensor field.
Pause operates.
Refer to "Daily use".
There is water or fat stains on
the control panel.
Clean the control panel.
An acoustic signal sounds and
the hob deactivates.
An acoustic signal sounds
when the hob is deactivated.
You put something on one or
more sensor fields.
Remove the object from the
sensor fields.
The hob deactivates.
You put something on the sen-
Remove the object from the
sensor field.
sor field
.
Residual heat indicator does
not come on.
The zone is not hot because it
operated only for a short time
or the sensor is damaged.
If the zone operated sufficiently
long to be hot, speak to an Authorised Service Centre.
Hob²Hood does not work.
You covered the control panel.
Remove the object from the
control panel.
You use a very tall pot which
blocks the signal.
Use a smaller pot, change the
cooking zone or operate the
hood manually.
The zone is hot.
Let the zone become sufficiently cool.
The highest heat setting is set.
The highest heat setting has
the same power as the function.
Automatic Heat Up does not
operate.
14
Remedy
Problem
Possible cause
The heat setting changes between two levels.
Power management operates.
Refer to "Daily use".
The sensor fields become hot.
The cookware is too large or
you put it too near to the controls.
Put large cookware on the rear
zones, if possible.
comes on.
Child Safety Device or Lock
operates.
Refer to "Daily use".
comes on.
There is no cookware on the
zone.
Put cookware on the zone.
The cookware does not cover
the cross / square.
Cover the cross / square fully.
The cookware is unsuitable.
Use suitable cookware. Refer
to "Hints and tips".
The diameter of the bottom of
the cookware is too small for
the zone.
Use cookware with correct dimensions. Refer to "Technical
data".
There is an error in the hob.
Deactivate the hob and activate it again after 30 seconds.
and a number come on.
Remedy
If
comes on again, disconnect the hob from the electrical
supply. After 30 seconds, connect the hob again. If the problem continues, speak to an Authorised Service Centre.
You can hear a constant beep
noise.
The electrical connection is incorrect.
IF YOU CANNOT FIND A SOLUTION...
If you cannot find a solution to the problem yourself,
contact your dealer or an Authorised Service
Centre. Give the data from the rating plate. Give
also three digit letter code for the glass ceramic (it
is in the corner of the glass surface) and an error
message that comes on. Make sure, you operated
Disconnect the hob from the
electrical supply. Ask a qualified electrician to check the installation.
the hob correctly. If not the servicing by a service
technician or dealer will not be free of charge, also
during the warranty period. The instructions about
the Service Centre and conditions of guarantee are
in the guarantee booklet.
TECHNICAL DATA
RATING PLATE
Model ZIFN844K
Typ 62 D4A 01 AA
Induction 7.35 kW
Ser.Nr. .................
PNC 949 595 699 00
220 - 240 V / 400 V 2N 50 - 60 Hz
Made in Germany
7.35 kW
15
ZANUSSI
COOKING ZONES SPECIFICATION
Cooking zone
Nominal power
(maximum heat
setting) [W]
PowerBoost [W]
PowerBoost maxiCookware diamemum duration
ter [mm]
[min]
Left front
2300
3200
10
125 - 210
Left rear
2300
3200
10
125 - 210
Middle front
1400
2500
4
125 - 145
Right rear
2300
3600
10
205 - 240
The power of the cooking zones can be different in
some small range from the data in the table. It
changes with the material and dimensions of the
cookware.
For optimal cooking results use cookware no larger
than the diameter in the table.
ENERGY EFFICIENCY
PRODUCT INFORMATION ACCORDING TO EU 66/2014 VALID FOR EU MARKET ONLY
Model identification
ZIFN844K
Type of hob
Built-In Hob
Number of cooking zones
4
Heating technology
Induction
Diameter of circular cooking
zones (Ø)
Left front
Left rear
Middle front
Right rear
21.0 cm
21.0 cm
14.5 cm
24.0 cm
Energy consumption per
cooking zone (EC electric
cooking)
Left front
Left rear
Middle front
Right rear
179.6 Wh / kg
189.1 Wh / kg
180.2 Wh / kg
185.2 Wh / kg
Energy consumption of the
hob (EC electric hob)
EN 60350-2 - Household electric cooking
appliances - Part 2: Hobs - Methods for measuring
performance
The energy measurements referring to the cooking
area are identified by the markings of the respective
cooking zones.
ENERGY SAVING
You can save energy during everyday cooking if you
follow below hints.
16
183.5 Wh / kg
•
•
•
•
•
When you heat up water, use only the amount
you need.
If it is possible, always put the lids on the
cookware.
Before you activate the cooking zone put the
cookware on it.
Put the smaller cookware on the smaller cooking
zones.
Put the cookware directly in the centre of the
cooking zone.
•
Use the residual heat to keep the food warm or
to melt it.
ENVIRONMENTAL CONCERNS
with the symbol with the household waste.
Return the product to your local recycling facility or
contact your municipal office.
Recycle materials with the symbol
. Put the
packaging in relevant containers to recycle it. Help
protect the environment and human health by
recycling waste of electrical and electronic
appliances. Do not dispose of appliances marked
17
*
18
19
867357350-B-342019
WWW.ZANUSSI.COM/SHOP
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising