LAMONA | LAM1902 | User manual | LAMONA LAM1902 User Manual

LAMONA LAM1902 User Manual
Hob
LAM1902
User Manual
www.howdens.com/appliance-registration
See back page for product serial number
Contents
Safety information
4
Safety instructions
5
Installation
8
Product description
10
Daily use
12
Hints and tips
18
Care and cleaning
20
Troubleshooting
21
Technical data
23
Energy efficiency
23
Your guarantee
24
Subject to change without notice.
Safety information
Before the installation and use of the appliance, carefully read
the supplied instructions. The manufacturer is not responsible
for any injuries or damages that are the result of incorrect
installation or usage. Always keep the instructions in a safe
and accessible location for future reference.
Children and vulnerable people safety
•
•
•
•
•
•
•
•
This appliance can be used by children aged from 8 years
and above and persons with reduced physical, sensory or
mental capabilities or lack of experience and knowledge if
they have been given supervision or instruction concerning
the use of the appliance in a safe way and understand the
hazards involved.
Children between 3 and 8 years of age and persons with
very extensive and complex disabilities shall be kept away
unless continuously supervised.
Children of less than 3 years of age should be kept away
unless continuously supervised.
Do not let children play with the appliance.
Keep all packaging away from children and dispose of it
appropriately.
Keep children and pets away from the appliance when it
operates or when it cools down. Accessible parts are hot.
If the appliance has a child safety device, it should be
activated.
Children shall not carry out cleaning and user maintenance
of the appliance without supervision.
General Safety
•
•
4
WARNING: The appliance and its accessible parts become
hot during use. Care should be taken to avoid touching
heating elements.
Do not operate the appliance by means of an external timer
or separate remote-control system.
•
•
•
•
•
•
•
•
•
•
WARNING: Unattended cooking on a hob with fat or oil can
be dangerous and may result in fire.
NEVER try to extinguish a fire with water, but switch off the
appliance and then cover flame e.g. with a lid or a fire
blanket.
CAUTION: The cooking process has to be supervised. A
short term cooking process has to be supervised
continuously.
WARNING: Danger of fire: Do not store items on the cooking
surfaces.
Metallic objects such as knives, forks, spoons and lids
should not be placed on the hob surface since they can get
hot.
Do not use a steam cleaner to clean the appliance.
After use, switch off the hob element by its control and do
not rely on the pan detector.
If the glass ceramic surface / glass surface is cracked, switch
off the appliance and unplug it from the mains. In case the
appliance is connected to the mains directly using junction
box, remove the fuse to disconnect the appliance from power
supply. In either case contact the Authorised Service Centre.
If the supply cord is damaged, it must be replaced by the
manufacturer, an authorized Service or similarly qualified
persons in order to avoid a hazard.
WARNING: Use only hob guards designed by the
manufacturer of the cooking appliance or indicated by the
manufacturer of the appliance in the instructions for use as
suitable or hob guards incorporated in the appliance. The
use of inappropriate guards can cause accidents.
Safety instructions
Installation
WARNING! Only a qualified person must install this appliance.
WARNING! Risk of injury or damage to the appliance.
5
•
•
•
•
•
•
•
•
•
•
Remove all the packaging.
Do not install or use a damaged appliance.
Follow the installation instructions supplied with the appliance.
Keep the minimum distance from other appliances and units.
Always take care when moving the appliance as it is heavy. Always use safety gloves
and enclosed footwear.
Seal the cut surfaces with a sealant to prevent moisture to cause swelling.
Protect the bottom of the appliance from steam and moisture.
Do not install the appliance adjacent to a door or under a window. This prevents hot
cookware falling from the appliance when the door or the window is opened.
Each appliance has cooling fans on the bottom.
If the appliance is installed above a drawer:
– Do not store any small pieces or sheets of paper that could be pulled in, as they can
damage the cooling fans or impair the cooling system.
– Keep a distance of minimum 2 cm between the bottom of the appliance and parts
stored in the drawer.
Electrical Connection
WARNING! Risk of fire and electric shock.
• All electrical connections should be made by a qualified electrician.
• The appliance must be earthed.
• Before carrying out any operation make sure that the appliance is disconnected from the
power supply.
• Make sure that the parameters on the rating plate are compatible with the electrical
ratings of the mains power supply.
• Make sure the appliance is installed correctly. Loose and incorrect electricity mains
cable or plug (if applicable) can make the terminal become too hot.
• Use the correct electricity mains cable.
• Do not let the electricity mains cable tangle.
• Make sure that a shock protection is installed.
• Use the strain relief clamp on the cable.
• Make sure the mains cable or plug (if applicable) does not touch the hot appliance or
hot cookware, when you connect the appliance to the near sockets.
• Do not use multi-plug adapters and extension cables.
• Make sure not to cause damage to the mains plug (if applicable) or to the mains cable.
Contact our Authorised Service Centre or an electrician to change a damaged mains
cable.
• The shock protection of live and insulated parts must be fastened in such a way that it
cannot be removed without tools.
• Connect the mains plug to the mains socket only at the end of the installation. Make
sure that there is access to the mains plug after the installation.
• If the mains socket is loose, do not connect the mains plug.
• Do not pull the mains cable to disconnect the appliance. Always pull the mains plug.
• Use only correct isolation devices: line protecting cut-outs, fuses (screw type fuses
removed from the holder), earth leakage trips and contactors.
• The electrical installation must have an isolation device which lets you disconnect the
appliance from the mains at all poles. The isolation device must have a contact opening
width of minimum 3 mm.
6
Use
WARNING! Risk of injury, burns and electric shock.
•
•
•
•
•
•
•
•
•
•
•
Remove all the packaging, labelling and protective film (if applicable) before first use.
This appliance is for household use only.
Do not change the specification of this appliance.
Make sure that the ventilation openings are not blocked.
Do not let the appliance stay unattended during operation.
Set the cooking zone to “off” after each use.
Do not rely on the pan detector.
Do not put cutlery or saucepan lids on the cooking zones. They can become hot.
Do not operate the appliance with wet hands or when it has contact with water.
Do not use the appliance as a work surface or as a storage surface.
If the surface of the appliance is cracked, disconnect immediately the appliance from the
power supply. This to prevent an electrical shock.
• Users with a pacemaker must keep a distance of minimum 30 cm from the induction
cooking zones when the appliance is in operation.
• When you place food into hot oil, it may splash.
WARNING! Risk of fire and explosion
• Fats and oil when heated can release flammable vapours. Keep flames or heated
objects away from fats and oils when you cook with them.
• The vapours that very hot oil releases can cause spontaneous combustion.
• Used oil, that can contain food remnants, can cause fire at a lower temperature than oil
used for the first time.
• Do not put flammable products or items that are wet with flammable products in, near or
on the appliance.
WARNING! Risk of damage to the appliance.
•
•
•
•
•
•
•
•
Do not keep hot cookware on the control panel.
Do not put a hot pan cover on the glass surface of the hob.
Do not let cookware to boil dry.
Be careful not to let objects or cookware fall on the appliance. The surface can be
damaged.
Do not activate the cooking zones with empty cookware or without cookware.
Do not put aluminium foil on the appliance.
Cookware made of cast iron, aluminium or with a damaged bottom can cause scratches
on the glass / glass ceramic. Always lift these objects up when you have to move them
on the cooking surface.
This appliance is for cooking purposes only. It must not be used for other purposes, for
example room heating.
Care and cleaning
•
•
•
•
Clean the appliance regularly to prevent the deterioration of the surface material.
Deactivate the appliance and let it cool down before you clean it.
Disconnect the appliance from the electrical supply before maintenance.
Do not use water spray and steam to clean the appliance.
7
• Clean the appliance with a moist soft cloth. Only use neutral detergents. Do not use any
abrasive products, abrasive cleaning pads, solvents or metal objects.
Service
• To repair the appliance contact an Authorised Service Centre.
• Use original spare parts only.
Disposal
WARNING! Risk of injury or suffocation.
• Contact your municipal authority for information on how to discard the appliance
correctly.
• Disconnect the appliance from the mains supply.
• Cut off the mains electrical cable close to the appliance and dispose of it.
Installation
WARNING! Refer to Safety chapters.
Before the installation
Before you install the hob, write down the information bellow from the rating plate. The
rating plate is on the bottom of the hob.
Serial number ...........................
Built-in hobs
Only use the built-in hobs after you assemble the hob into correct built-in units and work
surfaces that align to the standards.
Connection cable
• The hob is supplied with a connection cable.
• For a single-phase connection use the cable types: H03BB-F, H03V2V2-F or H03VV-F,
which withstand the temperature of 70°C or higher, or the cable types suitable for a twophase connection.
• For a two-phase connection use the cable types: H05BB-F, H05V2V2-F or H05VV-F
which withstand the temperature of 70°C or higher.
8
Assembly
min.
28 mm
min.
500mm
min.
50mm
min.
12 mm
R 5mm
min.
55mm
+1
490+1mm 750 mm
9
min. 60mm
If the appliance is installed above a drawer, the hob ventilation can warm up the
items stored in the drawer during the cooking process.
Product description
Cooking surface layout
1
1
1
1 Induction cooking zone
2 Control panel
1
1
2
10
Control panel layout
1
2
3
4
5
11
6
7
9
10
8
Use the sensor fields to operate the appliance. The displays, indicators and sounds tell
which functions operate.
Sensor
field
Function
Comment
1
ON / OFF
To activate and deactivate the hob.
2
Lock / Child Safety Device
To lock / unlock the control panel.
3
STOP+GO
To activate and deactivate the function.
-
Heat setting display
To show the heat setting.
-
Timer indicators of cooking
zones
To show for which zone you set the time.
-
Timer display
To show the time in minutes.
Hob²Hood
To activate and deactivate the manual mode of
the function.
-
To select the cooking zone.
-
To increase or decrease the time.
PowerBoost
To activate the function.
Control bar
To set a heat setting.
4
5
6
7
8
/
9
10
11
-
Heat setting displays
Display
Description
The cooking zone is deactivated.
11
Display
Description
The cooking zone operates.
-
STOP+GO operates.
Automatic Heat Up operates.
PowerBoost operates.
+ digit
There is a malfunction.
/
OptiHeat Control (3 step Residual heat indicator): continue cooking / keep
warm / residual heat.
/
Lock / Child Safety Device operates.
Incorrect or too small cookware or no cookware on the cooking zone.
Automatic Switch Off operates.
OptiHeat Control (3 step Residual heat indicator)
WARNING!
/
/
There is a risk of burns from residual heat. The
indicators show the level of the residual heat for the cooking zones you are
currently using. The indicators may also come on for the neighbouring cooking
zones even if you are not using them.
The induction cooking zones produce the heat necessary for the cooking process directly
in the bottom of the cookware. The glass ceramic is heated by the heat of the cookware.
Daily use
WARNING! Refer to Safety chapters.
Activating and deactivating
Touch
for 1 second to activate or deactivate the hob.
Automatic Switch Off
The function deactivates the hob automatically if:
• all cooking zones are deactivated,
• you do not set the heat setting after you activate the hob,
• you spill something or put something on the control panel for more than 10 seconds (a
pan, a cloth, etc.). An acoustic signal sounds and the hob deactivates. Remove the
object or clean the control panel.
• the hob gets too hot (e.g. when a saucepan boils dry). Let the cooking zone cool down
before you use the hob again.
12
• you use incorrect cookware. The symbol
comes on and the cooking zone deactivates
automatically after 2 minutes.
• you do not deactivate a cooking zone or change the heat setting. After some time
comes on and the hob deactivates.
The relation between the heat setting and the time after which the hob deactivates:
Heat setting
,1-3
The hob deactivates after
6 hours
4-7
5 hours
8-9
4 hours
10 - 14
1.5 hour
The heat setting
To set or change the heat setting:
Touch the control bar at the correct heat setting or move your finger along the control bar
until you reach the correct heat setting.
Automatic Heat Up
Activate this function to get a desired heat setting in a shorter time. When it is on, the zone
operates on the highest setting in the beginning and then continues to cook at the desired
heating setting.
To activate the function the cooking zone must be cold.
To activate the function for a cooking zone: touch
comes on.
a desired heat setting. After 3 seconds
(
comes on). Immediately touch
To deactivate the function: change the heat setting.
PowerBoost
This function makes more power available to the induction cooking zones. The function
can be activated for the induction cooking zone only for a limited period of time. After this
time the induction cooking zone automatically sets back to the highest heat setting.
Refer to “Technical data” chapter.
To activate the function for a cooking zone: touch
.
comes on.
To deactivate the function: change the heat setting.
13
Timer
Count Down Timer
You can use this function to set how long the cooking zone should operate for a single
cooking session.
First set the heat setting for the cooking zone then set the function.
To set the cooking zone: touch
cooking zone comes on.
again and again until the indicator of a necessary
To activate the function: touch
of the timer to set the time (00 - 99 minutes). When the
indicator of the cooking zone starts to flash slowly the time counts down.
To see the remaining time: set the cooking zone with . The indicator of the cooking
zone starts to flash quickly. The display shows the remaining time.
To change the time: set the cooking zone with
. Touch
or
.
and touch
To deactivate the function: set the cooking zone with
time counts back to 00. The indicator of the cooking zone goes out.
. The remaining
When the time comes to an end, the sound operates and 00 flashes. The
cooking zone deactivates.
To stop the sound: touch
.
CountUp Timer (The count up timer)
You can use this function to monitor how long the cooking zone operates.
To set the cooking zone: touch
cooking zone comes on.
again and again until the indicator of a necessary
To activate the function: touch
of the timer.
comes on. When the indicator of the
cooking zone starts to flash slowly the time counts up. The display switches between
and counted time (minutes).
To see how long the cooking zone operates: set the cooking zone with . The indicator
of the cooking zone starts to flash quickly. The display shows how long the zone operates.
To deactivate the function: set the cooking zone with
indicator of the cooking zone goes out.
and touch
or
. The
Minute Minder
You can use this function as a Minute Minder when the hob is activated and the cooking
zones do not operate. The heat setting display shows .
To activate the function: touch . Touch
or
of the timer to set the time. When the
time comes to an end, the sound operates and 00 flashes.
To stop the sound: touch
14
.
The function has no effect on the operation of the cooking zones.
STOP+GO
This function sets all cooking zones that operate to the lowest heat setting.
When the function operates, you cannot change the heat setting.
The function does not stop the timer functions.
To activate the function: touch
.
comes on.
. The previous heat setting comes on.
To deactivate the function: touch
Lock
You can lock the control panel while cooking zones operate. It prevents an accidental
change of the heat setting.
Set the heat setting first.
To activate the function: touch
To deactivate the function: touch
.
comes on for 4 seconds. The Timer stays on.
. The previous heat setting comes on.
When you deactivate the hob, you also deactivate this function.
Child Safety Device
This function prevents an accidental operation of the hob.
To activate the function: activate the hob with . Do not set the heat setting. Touch
for 4 seconds.
comes on. Deactivate the hob with .
To deactivate the function: activate the hob with . Do not set the heat setting. Touch
for 4 seconds.
comes on. Deactivate the hob with .
comes
To override the function for only one cooking time: activate the hob with .
on. Touch
for 4 seconds. Set the heat setting in 10 seconds. You can operate the
the function operates again.
hob. When you deactivate the hob with
OffSound Control (Deactivating and activating the sounds)
Deactivate the hob. Touch
for 3 seconds. The display comes on and goes out. Touch
for 3 seconds.
or
comes on. Touch
of the timer to choose one of the following:
- the sounds are off
•
- the sounds are on
•
To confirm your selection wait until the hob deactivates automatically.
When the function is set to
you can hear the sounds only when:
• you touch
• Minute Minder comes down
• Count Down Timer comes down
15
• you put something on the control panel.
Power management
• Cooking zones are grouped according to the location and number of the phases in the
hob. See the illustration.
• Each phase has a maximum electricity loading of 3700 W.
• The function divides the power between cooking zones connected to the same phase.
• The function activates when the total electricity loading of the cooking zones connected
to a single phase exceeds 3700 W.
• The function decreases the power to the other cooking zones connected to the same
phase.
• The heat setting display of the reduced zones alternates between the chosen heat
setting and the reduced heat setting. After some time the heat setting display of the
reduced zones stays on the reduced heat setting.
Hob²Hood
It is an advanced automatic function which connects the hob to a special hood. Both the
hob and the hood have an infrared signal communicator. Speed of the fan is defined
automatically on basis of mode setting and temperature of the hottest cookware on the
hob. You can also operate the fan from the hob manually.
For most of the hoods the remote system is originally deactivated. Activate it
before you use the function. For more information refer to hood user manual.
Operating the function automatically
To operate the function automatically set the automatic mode to H1 – H6. The hob is
originally set to H5. The hood reacts whenever you operate the hob. The hob recognizes
temperature of the cookware automatically and adjusts the speed of the fan.
16
Automatic modes
Automatic light
Boiling1)
Frying2)
Mode H0
Off
Off
Off
Mode H1
On
Off
Off
Mode H2 3)
On
Fan speed 1
Fan speed 1
Mode H3
On
Off
Fan speed 1
Mode H4
On
Fan speed 1
Fan speed 1
Mode H5
On
Fan speed 1
Fan speed 2
Mode H6
On
Fan speed 2
Fan speed 3
1) The hob detects the boiling process and activates fan speed in accordance with automatic mode.
2) The hob detects the frying process and activates fan speed in accordance with automatic mode.
3) This mode activates the fan and the light and does not rely on the temperature.
Changing the automatic mode
1.
2.
3.
4.
5.
Deactivate the appliance.
Touch
for 3 seconds. The display comes on and goes off.
Touch
for 3 seconds.
a few times until
comes on.
Touch
Touch
of the Timer to select an automatic mode.
To operate the hood directly on the hood panel deactivate the automatic mode
of the function.
When you finish cooking and deactivate the hob, the hood fan may still operate
for a certain period of time. After that time the system deactivates the fan
automatically and prevents you from accidental activation of the fan for the next
30 seconds.
Operating the fan speed manually
You can also operate the function manually. To do that touch
when the hob is active.
This deactivates automatic operation of the function and allows you to change the fan
you raise the fan speed by one. When you reach an
speed manually. When you press
intensive level and press
again you will set fan speed to 0 which deactivates the hood
fan. To start the fan again with fan speed 1 touch .
To activate automatic operation of the function, deactivate the hob and activate
it again.
17
Activating the light
You can set the hob to activate the light automatically whenever you activate the hob. To
do so set the automatic mode to H1 – H6.
The light on the hood deactivates 2 minutes after deactivating the hob.
Hints and tips
WARNING! Refer to Safety chapters.
Cookware
For induction cooking zones a strong electro-magnetic field creates the heat in
the cookware very quickly.
Use the induction cooking zones with suitable cookware.
Cookware material
• correct: cast iron, steel, enamelled steel, stainless steel, multi-layer bottom (with a
correct marking from a manufacturer).
• not correct: aluminium, copper, brass, glass, ceramic, porcelain.
Cookware is suitable for an induction hob if:
• water boils very quickly on a zone set to the highest heat setting.
• a magnet pulls on to the bottom of the cookware.
The bottom of the cookware must be as thick and flat as possible.
Ensure pan bases are clean and dry before placing on the hob surface.
Cookware dimensions
Induction cooking zones adapt to the dimension of the bottom of the cookware
automatically.
The cooking zone efficiency is related to the diameter of the cookware. The cookware with
a diameter smaller than the minimum receives only a part of the power generated by the
cooking zone.
Refer to "Technical data".
The noises during operation
If you can hear:
• crack noise: cookware is made of different materials (a sandwich construction).
• whistle sound: you use a cooking zone with a high power level and the cookware is
made of different materials (a sandwich construction).
• humming: you use a high power level.
• clicking: electric switching occurs.
• hissing, buzzing: the fan operates.
18
The noises are normal and do not indicate any malfunction.
Öko Timer (Eco Timer)
To save energy, the heater of the cooking zone deactivates before the count down timer
sounds. The difference in the operation time depends on the heat setting level and the
length of the cooking operation.
Examples of cooking applications
The correlation between the heat setting of a zone and its consumption of power is not
linear. When you increase the heat setting, it is not proportional to the increase of the
consumption of power. It means that a cooking zone with the medium heat setting uses
less than a half of its power.
The data in the table is for guidance only.
Heat setting
Use to:
Time
(min)
Hints
Keep cooked food warm.
as
necessary
Put a lid on the cookware.
1-3
Hollandaise sauce, melt: butter,
chocolate, gelatine.
5 - 25
Mix from time to time.
1-3
Solidify: fluffy omelettes, baked
eggs.
10 - 40
Cook with a lid on.
3-5
Simmer rice and milkbased
dishes, heat up ready-cooked
meals.
25 - 50
Add at least twice as much liquid as rice, mix milk dishes
halfway through the procedure.
5-7
Steam vegetables, fish, meat.
20 - 45
Add a couple of tablespoons of
liquid.
7-9
Steam potatoes.
20 - 60
Use max. ¼ l of water for 750 g
of potatoes.
7-9
Cook larger quantities of food,
stews and soups.
60 150
Up to 3 l of liquid plus ingredients.
9 - 12
Gentle fry: escalope, veal cordon bleu, cutlets, rissoles, sausages, liver, roux, eggs, pancakes, doughnuts.
as
necessary
Turn halfway through.
12 - 13
Heavy fry, hash browns, loin
steaks, steaks.
5 - 15
Turn halfway through.
14
Boil water, cook pasta, sear meat (goulash, pot roast), deep-fry chips.
-1
Boil large quantities of water. PowerBoost is activated.
19
Hints and Tips for Hob²Hood
When you operate the hob with the function:
•
•
•
•
Protect the hood panel from direct sunlight.
Do not spot halogen light on the hood panel.
Do not cover the hob control panel.
Do not interrupt the signal between the hob and the hood (e.g. with the hand, a
cookware handle or a tall pot). See the picture.
The hood in the picture is only exemplary.
Other remotely controlled appliances may block the signal. Do not use any
remotely controlled appliances at the time when you use the function on the
hob.
Cooker hoods with the Hob²Hood function
To find the full range of cooker hoods which work with this function refer to our consumer
website.
Care and cleaning
WARNING! Refer to Safety chapters.
General information
•
•
•
•
•
Clean the hob after each use.
Always use cookware with a clean base.
Scratches or dark stains on the surface have no effect on how the hob operates.
Use a special cleaner suitable for the surface of the hob.
Use a special scraper for the glass.
Cleaning the hob
• Remove immediately: melted plastic, plastic foil, sugar and food with sugar, otherwise,
the dirt can cause damage to the hob. Take care to avoid burns. Use a special hob
scraper on the glass surface at an acute angle and move the blade on the surface.
20
• Remove when the hob is sufficiently cool: limescale rings, water rings, fat stains,
shiny metallic discoloration. Clean the hob with a moist cloth and a non-abrasive
detergent. After cleaning, wipe the hob dry with a soft cloth.
• Remove shiny metallic discoloration: use a solution of water with vinegar and clean
the glass surface with a cloth.
Troubleshooting
WARNING! Refer to Safety chapters.
What to do if...
Problem
Possible cause
Remedy
You cannot activate or operate the hob.
The hob is not connected to
an electrical supply or it is
connected incorrectly.
Check if the hob is correctly
connected to the electrical
supply. Refer to the connection diagram.
The fuse is blown.
Make sure that the fuse is the
cause of the malfunction. If
the fuse is blown again and
again, contact a qualified
electrician.
You do not set the heat setting for 10 seconds.
Activate the hob again and
set the heat setting in less
than 10 seconds.
You touched 2 or more sensor fields at the same time.
Touch only one sensor field.
STOP+GO operates.
Refer to "Daily use".
There is water or fat stains on
the control panel.
Clean the control panel.
An acoustic signal sounds
and the hob deactivates.
An acoustic signal sounds
when the hob is deactivated.
You put something on one or
more sensor fields.
Remove the object from the
sensor fields.
The hob deactivates.
You put something on the
Remove the object from the
sensor field.
sensor field
.
Residual heat indicator does
not come on.
The zone is not hot because
it operated only for a short
time or the sensor is damaged.
If the zone operated sufficiently long to be hot, speak
to an Authorised Service
Centre.
Hob²Hood does not work.
You covered the control panel.
Remove the object from the
control panel.
21
Problem
Possible cause
Remedy
You use a very tall pot which
blocks the signal.
Use a smaller pot, change
the cooking zone or operate
the hood manually.
The zone is hot.
Let the zone become sufficiently cool.
The highest heat setting is
set.
The highest heat setting has
the same power as the function.
The heat setting changes between two levels.
Power management operates.
Refer to "Daily use".
The sensor fields become
hot.
The cookware is too large or
you put it too near to the controls.
Put large cookware on the
rear zones if possible.
There is no sound when you
touch the panel sensor fields.
The sounds are deactivated.
Activate the sounds. Refer to
"Daily use".
comes on.
Child Safety Device or Lock
operates.
Refer to "Daily use".
comes on.
There is no cookware on the
zone.
Put cookware on the zone.
The cookware is unsuitable.
Use suitable cookware. Refer
to "Hints and tips".
The diameter of the bottom of
the cookware is too small for
the zone.
Use cookware with correct dimensions. Refer to "Technical data".
There is an error in the hob.
Deactivate the hob and activate it again after 30 sec-
Automatic Heat Up does not
operate.
and a number come on.
onds. If
comes on again,
disconnect the hob from the
electrical supply. After 30
seconds, connect the hob
again. If the problem continues, speak to an Authorised
Service Centre.
You can hear a constant
beep noise.
The electrical connection is
incorrect.
Disconnect the hob from the
electrical supply. Ask a qualified electrician to check the
installation.
If you cannot find a solution...
If you cannot find a solution to the problem yourself, contact your dealer or an Authorised
Service Centre. Give the data from the rating plate. Give also three digit letter code for the
22
glass ceramic (it is in the corner of the glass surface) and an error message that comes on.
Make sure, you operated the hob correctly. If not the servicing by a service technician or
dealer will not be free of charge, also during the warranty period. The instructions about the
Service Centre and conditions of guarantee are in the guarantee booklet.
Technical data
Rating plate
Model LAM1902
Typ 62 D5A 01 AA
Induction 7.35 kW
Ser.Nr. .................
LAMONA
PNC 949 594 462 00
220 - 240 V / 400 V 2N 50 - 60 Hz
Made in Germany
7.35 kW
Cooking zones specification
Cooking zone
Nominal power (maximum
heat setting)
[W]
PowerBoost
[W]
PowerBoost
maximum duration [min]
Cookware diameter [mm]
Left front
1400
2500
4
125 - 145
Left rear
2300
3200
10
125 - 210
Middle front
2300
3200
10
125 - 210
Right front
1400
2500
4
125 - 145
Right front
2300
3200
10
125 - 210
The power of the cooking zones can be different in some small range from the data in the
table. It changes with the material and dimensions of the cookware.
For optimal cooking results use cookware no larger than the diameter in the table.
Energy efficiency
Product information according to EU 66/2014
Model identification
LAM1902
Type of hob
Built-In Hob
Number of cooking zones
5
Heating technology
Induction
23
Diameter of circular cooking
zones (Ø)
Left front
Left rear
Middle front
Right front
14.5 cm
21.0 cm
21.0 cm
14.5 cm
21.0 cm
Energy consumption per
cooking zone (EC electric
cooking)
Left front
Left rear
Middle front
Right front
Right rear
180.4 Wh / kg
177.5 Wh / kg
177.0 Wh / kg
180.2 Wh / kg
177.0 Wh / kg
Energy consumption of the
hob (EC electric hob)
178.4 Wh / kg
EN 60350-2 - Household electric cooking appliances - Part 2: Hobs - Methods for
measuring performance
Energy saving
You can save energy during everyday cooking if you follow below hints.
•
•
•
•
•
•
When you heat up water, use only the amount you need.
If it is possible, always put the lids on the cookware.
Before you activate the cooking zone put the cookware on it.
Put the smaller cookware on the smaller cooking zones.
Put the cookware directly in the centre of the cooking zone.
Use the residual heat to keep the food warm or to melt it.
Your guarantee
Product Guarantee Details (UK only)
Your appliance has the benefit of a comprehensive manufacturer’s guarantee which
covers the cost of breakdown repairs. (Details of which are shown on your Proof of
Purchase Document).
• Any claim during the period of the guarantee (MUST BE ACCOMPANIED BY THE
PROOF OF PURCHASE)
• The product must be correctly installed and operated in accordance with the
manufacturer’s instructions and used for normal domestic purposes.
• This guarantee does not cover accidental damage, misuse or alternations which are
likely to affect the product.
• The guarantee is invalid if the product is tampered with, or repaired by any unauthorised
person.
(The guarantee in no way affects your statutory or legal rights)
What to do if you need to report a problemPlease ensure you have ready:
• The product’s model & serial numbers
• Howdens Proof of Purchase document
• Your full contact details
24
Call the Service Line on 0344 460 0006
Environmental concerns
Recycle materials with the symbol . Put the packaging in relevant containers to recycle
it. Help protect the environment and human health by recycling waste of electrical and
electronic appliances. Do not dispose of appliances marked with the symbol with the
household waste. Return the product to your local recycling facility or contact your
municipal office.
25
*
26
27
867349062-D-092019
Product serial number
(Place sticker here)
ISSUE V4
260219
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising