Electrolux | HOP770MF | User manual | Electrolux HOP770MF User Manual

Electrolux HOP770MF User Manual
HOP770MF
EN
Hob
User Manual
Get the most out
of your appliance
For quick access to manuals, how-to guides,
support and more through our photo
registration visit electrolux.com/register
2
www.electrolux.com
CONTENTS
1. SAFETY INFORMATION....................................................................................2
2. SAFETY INSTRUCTIONS..................................................................................4
3. INSTALLATION.................................................................................................. 7
4. PRODUCT DESCRIPTION................................................................................ 8
5. DAILY USE......................................................................................................... 9
6. HINTS AND TIPS............................................................................................. 13
7. CARE AND CLEANING....................................................................................16
8. TROUBLESHOOTING......................................................................................16
9. TECHNICAL DATA...........................................................................................18
10. ENERGY EFFICIENCY.................................................................................. 19
WE’RE THINKING OF YOU
Thank you for purchasing an Electrolux appliance. You’ve chosen a product that
brings with it decades of professional experience and innovation. Ingenious and
stylish, it has been designed with you in mind. So whenever you use it, you can
be safe in the knowledge that you’ll get great results every time.
Welcome to Electrolux.
Visit our website for:
Get usage advice, brochures, trouble shooter, service information:
www.electrolux.com/webselfservice
Register your product for better service:
www.registerelectrolux.com
Buy Accessories, Consumables and Original spare parts for your appliance:
www.electrolux.com/shop
CUSTOMER CARE AND SERVICE
Always use original spare parts.
When contacting our Authorised Service Centre, ensure that you have the
following data available: Model, PNC, Serial Number.
The information can be found on the rating plate.
Warning / Caution-Safety information
General information and tips
Environmental information
Subject to change without notice.
1.
SAFETY INFORMATION
Before the installation and use of the appliance, carefully
read the supplied instructions. The manufacturer is not
responsible for any injuries or damages that are the
result of incorrect installation or usage. Always keep the
ENGLISH
3
instructions in a safe and accessible location for future
reference.
1.1 Children and vulnerable people safety
•
•
•
•
•
•
•
•
This appliance can be used by children aged from 8
years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience
and knowledge if they have been given supervision or
instruction concerning the use of the appliance in a
safe way and understand the hazards involved.
Children between 3 and 8 years of age and persons
with very extensive and complex disabilities shall be
kept away from the appliance unless continuously
supervised.
Children of less than 3 years of age should be kept
away from the appliance unless continuously
supervised.
Do not let children play with the appliance.
Keep all packaging away from children and dispose of
it appropriately.
Keep children and pets away from the appliance when
it operates or when it cools down. Accessible parts are
hot.
If the appliance has a child safety device, it should be
activated.
Children shall not carry out cleaning and user
maintenance of the appliance without supervision.
1.2 General Safety
•
•
•
WARNING: The appliance and its accessible parts
become hot during use. Care should be taken to avoid
touching heating elements.
Do not operate the appliance by means of an external
timer or separate remote-control system.
WARNING: Unattended cooking on a hob with fat or
oil can be dangerous and may result in fire.
4
www.electrolux.com
•
•
•
•
•
•
•
•
•
•
NEVER try to extinguish a fire with water, but switch
off the appliance and then cover flame e.g. with a lid
or a fire blanket.
CAUTION: The cooking process has to be supervised.
A short term cooking process has to be supervised
continuously.
WARNING: Danger of fire: Do not store items on the
cooking surfaces.
Metallic objects such as knives, forks, spoons and lids
should not be placed on the hob surface since they
can get hot.
Do not use the appliance before installing it in the
built-in structure.
Do not use a steam cleaner to clean the appliance.
After use, switch off the hob element by its control and
do not rely on the pan detector.
If the glass ceramic surface / glass surface is cracked,
switch off the appliance and unplug it from the mains.
In case the appliance is connected to the mains
directly using junction box, remove the fuse to
disconnect the appliance from power supply. In either
case contact the Authorised Service Centre.
If the supply cord is damaged, it must be replaced by
the manufacturer, an authorized Service or similarly
qualified persons in order to avoid a hazard.
WARNING: Use only hob guards designed by the
manufacturer of the cooking appliance or indicated by
the manufacturer of the appliance in the instructions
for use as suitable or hob guards incorporated in the
appliance. The use of inappropriate guards can cause
accidents.
2. SAFETY INSTRUCTIONS
2.1 Installation
WARNING!
Only a qualified person must
install this appliance.
WARNING!
Risk of injury or damage to
the appliance.
•
Remove all the packaging.
ENGLISH
•
•
•
•
•
•
•
•
•
•
Do not install or use a damaged
appliance.
Follow the installation instructions
supplied with the appliance.
Keep the minimum distance from
other appliances and units.
Always take care when moving the
appliance as it is heavy. Always use
safety gloves and enclosed footwear.
Seal the cut surfaces with a sealant to
prevent moisture to cause swelling.
Protect the bottom of the appliance
from steam and moisture.
Do not install the appliance adjacent
to a door or under a window. This
prevents hot cookware falling from the
appliance when the door or the
window is opened.
Each appliance has cooling fans on
the bottom.
If the appliance is installed above a
drawer:
– Do not store any small pieces or
sheets of paper that could be
pulled in, as they can damage the
cooling fans or impair the cooling
system.
– Keep a distance of minimum 2 cm
between the bottom of the
appliance and parts stored in the
drawer.
Remove any separator panels
installed in the cabinet below the
appliance.
2.2 Electrical Connection
WARNING!
Risk of fire and electric
shock.
•
•
•
•
•
All electrical connections should be
made by a qualified electrician.
The appliance must be earthed.
Before carrying out any operation
make sure that the appliance is
disconnected from the power supply.
Make sure that the parameters on the
rating plate are compatible with the
electrical ratings of the mains power
supply.
Make sure the appliance is installed
correctly. Loose and incorrect
electricity mains cable or plug (if
applicable) can make the terminal
become too hot.
•
•
•
•
•
•
•
•
•
•
•
•
•
2.3 Use
WARNING!
Risk of injury, burns and
electric shock.
•
•
5
Use the correct electricity mains
cable.
Do not let the electricity mains cable
tangle.
Make sure that a shock protection is
installed.
Use the strain relief clamp on the
cable.
Make sure the mains cable or plug (if
applicable) does not touch the hot
appliance or hot cookware, when you
connect the appliance to the near
sockets.
Do not use multi-plug adapters and
extension cables.
Make sure not to cause damage to
the mains plug (if applicable) or to the
mains cable. Contact our Authorised
Service Centre or an electrician to
change a damaged mains cable.
The shock protection of live and
insulated parts must be fastened in
such a way that it cannot be removed
without tools.
Connect the mains plug to the mains
socket only at the end of the
installation. Make sure that there is
access to the mains plug after the
installation.
If the mains socket is loose, do not
connect the mains plug.
Do not pull the mains cable to
disconnect the appliance. Always pull
the mains plug.
Use only correct isolation devices: line
protecting cut-outs, fuses (screw type
fuses removed from the holder), earth
leakage trips and contactors.
The electrical installation must have
an isolation device which lets you
disconnect the appliance from the
mains at all poles. The isolation
device must have a contact opening
width of minimum 3 mm.
Remove all the packaging, labelling
and protective film (if applicable)
before first use.
This appliance is for household use
only.
6
www.electrolux.com
•
•
•
•
•
•
•
•
•
•
•
Do not change the specification of this
appliance.
Make sure that the ventilation
openings are not blocked.
Do not let the appliance stay
unattended during operation.
Set the cooking zone to “off” after
each use.
Do not rely on the pan detector.
Do not put cutlery or saucepan lids on
the cooking zones. They can become
hot.
Do not operate the appliance with wet
hands or when it has contact with
water.
Do not use the appliance as a work
surface or as a storage surface.
If the surface of the appliance is
cracked, disconnect immediately the
appliance from the power supply. This
to prevent an electrical shock.
Users with a pacemaker must keep a
distance of minimum 30 cm from the
induction cooking zones when the
appliance is in operation.
When you place food into hot oil, it
may splash.
WARNING!
Risk of fire and explosion
•
•
•
•
Fats and oil when heated can release
flammable vapours. Keep flames or
heated objects away from fats and
oils when you cook with them.
The vapours that very hot oil releases
can cause spontaneous combustion.
Used oil, that can contain food
remnants, can cause fire at a lower
temperature than oil used for the first
time.
Do not put flammable products or
items that are wet with flammable
products in, near or on the appliance.
WARNING!
Risk of damage to the
appliance.
•
•
•
•
Do not keep hot cookware on the
control panel.
Do not put a hot pan cover on the
glass surface of the hob.
Do not let cookware to boil dry.
Be careful not to let objects or
cookware fall on the appliance. The
surface can be damaged.
•
•
•
•
Do not activate the cooking zones
with empty cookware or without
cookware.
Do not put aluminium foil on the
appliance.
Cookware made of cast iron,
aluminium or with a damaged bottom
can cause scratches on the glass /
glass ceramic. Always lift these
objects up when you have to move
them on the cooking surface.
This appliance is for cooking
purposes only. It must not be used for
other purposes, for example room
heating.
2.4 Care and cleaning
•
•
•
•
•
Clean the appliance regularly to
prevent the deterioration of the
surface material.
Deactivate the appliance and let it
cool down before you clean it.
Disconnect the appliance from the
electrical supply before maintenance.
Do not use water spray and steam to
clean the appliance.
Clean the appliance with a moist soft
cloth. Only use neutral detergents. Do
not use any abrasive products,
abrasive cleaning pads, solvents or
metal objects.
2.5 Service
•
•
To repair the appliance contact the
Authorised Service Centre.
Use original spare parts only.
2.6 Disposal
WARNING!
Risk of injury or suffocation.
•
•
•
Contact your municipal authority for
information on how to discard the
appliance correctly.
Disconnect the appliance from the
mains supply.
Cut off the mains electrical cable
close to the appliance and dispose of
it.
ENGLISH
7
3. INSTALLATION
WARNING!
Refer to Safety chapters.
520
710
60
3.1 Before the installation
Before you install the hob, write down the
information bellow from the rating plate.
The rating plate is on the bottom of the
hob.
23
280
44
550
min. 55
490+1
680+1
max R5
Serial number ...........................
3.2 Built-in hobs
Only use the built-in hobs after you
assemble the hob into correct built-in
units and work surfaces that align to the
standards.
3.3 Connection cable
•
•
The hob is supplied with a connection
cable.
To replace the damaged mains cable,
use the cable type: H05V2V2-F which
withstands a temperature of 90°C or
higher. Speak to your local Service
Centre.
3.4 Assembly
min.
500mm
min.
50mm
min. min.
12 60
If the appliance is installed
above a drawer, the hob
ventilation can warm up the
items stored in the drawer
during the cooking process.
min.
28
8
www.electrolux.com
4. PRODUCT DESCRIPTION
4.1 Cooking surface layout
1
1
1 Induction cooking zone
2 Control panel
1
1
2
4.2 Control panel layout
6
8
7
5
4
3
2
1
9
10
To see the control panel and the zone positions activate the appliance with
Use the sensor fields to operate the appliance. The displays, indicators and sounds
tell which functions operate.
Sen‐
sor
field
1
2
3
/
4
5
6
-
Function
Comment
ON / OFF
To activate and deactivate the hob.
Hob²Hood
To activate and deactivate the manual
mode of the function.
Pause
To activate and deactivate the function.
-
To increase or decrease the time.
-
To set the timer function.
Timer display
To show the time in minutes.
ENGLISH
Sen‐
sor
field
Function
Comment
Bridge
To activate and deactivate the function.
Control bar
To set a heat setting.
9
PowerBoost
To activate the function.
10
Lock / Child Safety De‐
vice
To lock / unlock the control panel.
7
8
-
4.3 OptiHeat Control (3 step
Residual heat indicator)
WARNING!
/ / There is a risk of
burns from residual heat.
The indicators show the
level of the residual heat for
the cooking zones you are
currently using. The
indicators may also come on
for the neighbouring cooking
zones even if you are not
using them.
9
The induction cooking zones produce the
heat necessary for the cooking process
directly in the bottom of the cookware.
The glass ceramic is heated by the heat
of the cookware.
When the hob is deactivated, the
indicators are still visible. When the hob
is cold enough, they disappear.
5. DAILY USE
WARNING!
Refer to Safety chapters.
5.1 Activating and deactivating
Touch
for 1 second to activate or
deactivate the hob.
The control bars come on after you
activate the hob and go off after you
deactivate the hob.
When the hob is deactivated you can
only see
.
5.2 Automatic Switch Off
The function deactivates the hob
automatically if:
•
•
you do not place any cookware on the
hob for 50 seconds,
you do not set the heat setting for 50
seconds after you place the
cookware,
•
you spill something or put something
on the control panel for more than 10
seconds (a pan, a cloth). When you
hear the acoustic signal, the hob
deactivates. Remove the object or
clean the control panel.
• the hob gets too hot (e.g. when a
saucepan boils dry). Let the cooking
zone cool down before you use the
hob again.
• you do not deactivate a cooking zone
or change the heat setting. After some
time, the hob deactivates.
The relation between the heat setting
and the time after which the hob
deactivates:
Heat setting
The hob deacti‐
vates after
1-2
6 hours
10
www.electrolux.com
Heat setting
The hob deacti‐
vates after
3-4
5 hours
5
4 hours
6-9
1.5 hours
5.3 Using the cooking zones
CAUTION!
Do not place hot cookware
on the control panel. There
is a risk of damage to the
electronic parts.
Once you place a pot on the cooking
zone and set the heat setting, it remains
the same for 50 seconds after you
remove the pot. The control bar blinks for
the second half of that time. If you place
the pot on the cooking zone again within
this time, the heat setting reactivates.
Otherwise the cooking zone deactivates.
5.5 Power management
function
•
•
•
•
•
Place the cookware in the centre of the
selected zone. Induction cooking zones
adapt to the dimension of the bottom of
the cookware automatically.
Once the pot is detected, the heat setting
0 comes on.
You can cook with large cookware
placed on two cooking zones at the
same time. The cookware must cover the
centres of both zones. If the cookware is
located between the two centres, Bridge
function will not be activated.
5.4 The heat setting
Touch the control bar at the desired heat
setting or move your finger along the
control bar to set or change the heat
setting for a cooking zone.
•
•
•
Cooking zones are grouped according
to the location and number of the
phases in the hob. See the illustration.
Each phase has a maximum
electricity loading of 3680 W.
The function divides the power
between cooking zones connected to
the same phase.
The function activates when the total
electricity loading of the cooking
zones connected to a single phase
exceeds 3680 W.
The function decreases the power of
the other cooking zones connected to
the same phase.
For cooking zones that have a
reduced power, the control panel
shows the maximum possible heat
settings.
If a higher heat setting is not available
reduce it for the other cooking zones
first.
The activation of the function depends
on the number and size of pots.
ENGLISH
5.6 Bridge
11
After 3 seconds, the timer starts to count
down automatically. The indicators
The function operates when
the pot covers the centres of
the two zones.
,
and
disappear.
When the time comes to an end, a signal
sounds and
flashes. To stop the
This function connects two left side
cooking zones and they operate as one.
signal, touch
First set the heat setting for one of the
left side cooking zones.
To deactivate the function: touch
To activate the function: touch . To
set or change the heat setting touch one
of the control sensors.
to set
on the display.
Alternatively, set the heat level to 0. As a
result, a signal sounds and the timer is
cancelled.
To deactivate the function: touch
The cooking zones operate
independently.
.
5.7 PowerBoost
This function activates more power for
the appropriate induction cooking zone,
depending on the cookware size. The
function can be activated only for a
limited period of time.
Touch
to activate the function for the
cooking zone.
The function deactivates automatically.
For maximum duration
values, refer to "Technical
data".
5.8 Timer
Count Down Timer
Use this function to specify how long a
cooking zone should operate during a
single cooking session.
Set the heat setting for the appropriate
cooking zone and then set the function.
1. Touch
to activate the function or
change the time.
The timer digits
and
and the indicators
come on the display.
If the timer is not set,
and
disappear after 3 seconds.
or
2. Touch
99 minutes).
to set the time (00 -
indicators
.
and
. The
come on. Use
or
Minute Minder
You can use this function when the hob
is activated but the cooking zones do not
operate.
Place a pot on a cooking zone to see
symbol.
1. Touch
to activate the function.
2. Touch
or
to set the time.
The function starts automatically after 4
seconds.
When you set the function, you can
remove the pot.
When the time comes to an end, a signal
flashes. Touch
sounds and
stop the signal.
to
To deactivate the function: touch
. The
indicators
to set
and
light up. Use
or
on the display.
The function has no effect
on the operation of the
cooking zones.
5.9 Pause
This function sets all cooking zones that
operate to the lowest heat setting.
When the function is active,
symbols can be used.
,
Touch
to activate the function.
The heat setting is lowered to 1.
or
12
www.electrolux.com
To deactivate the function, touch
previous heat setting comes on.
. The
5.10 Lock
You can lock the control panel while the
hob operates. It prevents an accidental
change of the heat setting.
Set the heat setting first.
Touch
Deactivate the hob first.
for 3 seconds to activate
1. Touch
the function.
The display comes on and goes out.
2. Touch
to activate the function.
To deactivate the function, touch
5.12 OffSound Control
(Deactivating and activating the
sounds)
.
When you deactivate the
hob, you also deactivate this
function.
5.11 Child Safety Device
This function prevents an accidental
operation of the hob.
Activate the hob first and do not set the
heat setting.
until signal sounds and the
Touch
indicator comes on to activate the
function.
The control bars disappear. Deactivate
the hob.
When you deactivate the
hob, the function is still
active.
To deactivate the function for only
one cooking time: Activate the hob with
.
comes on. Touch
until signal
sounds and the indicator comes off. The
control bar appears. Set the heat setting
within 50 seconds.You can operate the
hob. When you deactivate the hob with
the function is still active.
To deactivate the function
permanently: Activate the hob and do
not set the heat setting. Touch
until
signal sounds and the indicator comes
off. The control bars appear. Deactivate
the hob.
or
for 3 seconds.
comes on.
of the timer to choose one
3. Touch
of the following:
•
- the sounds are off
- the sounds are on
•
4. Wait until the hob deactivates
automatically to confirm your
selection.
When the function is set to
hear the sounds only when:
•
•
•
•
you can
you touch
Minute Minder comes down
Count Down Timer comes down
you put something on the control
panel.
5.13
Hob²Hood
It is an advanced automatic function
which connects the hob to a special
hood. Both the hob and the hood have
an infrared signal communicator. Speed
of the fan is defined automatically on the
basis of the mode setting and
temperature of the hottest cookware on
the hob. You can also operate the fan
from the hob manually.
For most of the hoods, the
remote system is originally
deactivated. Activate it
before you use the function.
For more information refer to
the hood user manual.
Operating the function automatically
To operate the function automatically set
the automatic mode to H1 - H6. The hob
is originally set to H5. The hood reacts
whenever you operate the hob. The hob
recognizes the temperature of the
cookware automatically and adjusts the
speed of the fan.
ENGLISH
Activating the light
You can set the hob to activate the light
automatically whenever you activate the
hob. To do so set the automatic mode to
H1 - H6.
The light on the hood
deactivates 2 minutes after
deactivating the hob.
Automatic modes
Auto‐ Boil‐
matic ing1)
light
Frying2)
Mode H0
Off
Off
Off
Mode H1
On
Off
Off
Mode H23) On
Fan
speed 1
Fan
speed 1
Mode H3
On
Off
Fan
speed 1
Mode H4
On
Fan
speed 1
Fan
speed 1
Mode H5
On
Fan
speed 1
Fan
speed 2
Mode H6
On
Fan
speed 2
Fan
speed 3
1) The hob detects the boiling process and
activates the fan speed in accordance with
the automatic mode.
2) The hob detects the frying process and
activates the fan speed in accordance with
the automatic mode.
3) This mode activates the fan and the light
and does not rely on the temperature.
Changing the automatic mode
2. Touch
for 3 seconds.
The display comes on and goes off.
3. Touch
for 3 seconds.
4. Touch
on.
a few times until
comes
5. Touch
of the Timer to select an
automatic mode.
When you finish cooking and deactivate
the hob, the hood fan may still operate
for a certain period of time. After that
time the system deactivates the fan
automatically and prevents you from an
accidental activation of the fan for the
next 30 seconds.
To operate the hood directly
on the hood panel deactivate
the automatic mode of the
function.
Operating the fan speed
manually
You can also operate the fan from the
hob manually.
Touch
when the hob is active.
This deactivates automatic operation of
the function and allows you to change
the fan speed manually.
When you press , you raise the fan
speed by one. When you reach an
intensive level and press
again, you
set the fan speed to 0 which deactivates
the hood fan. To start the fan again with
the fan speed 1 touch .
To activate an automatic
operation of the function,
deactivate the hob and
activate it again.
1. Deactivate the appliance.
6. HINTS AND TIPS
WARNING!
Refer to Safety chapters.
13
6.1 Cookware
For induction cooking zones
a strong electro-magnetic
field creates the heat in the
cookware very quickly.
14
www.electrolux.com
Use the induction cooking
zones with suitable
cookware.
Cookware material
•
correct: cast iron, steel, enamelled
steel, stainless steel, multi-layer
bottom (with a correct marking from a
manufacturer).
• not correct: aluminium, copper,
brass, glass, ceramic, porcelain.
Cookware is suitable for an induction
hob if:
•
•
water boils very quickly on a zone set
to the highest heat setting.
a magnet pulls on to the bottom of the
cookware.
The bottom of the cookware
must be as thick and flat as
possible.
Ensure pan bases are clean
and dry before placing on
the hob surface.
Cookware dimensions
Induction cooking zones adapt to the
dimension of the bottom of the cookware
automatically.
The cooking zone efficiency is related to
the diameter of the cookware. The
cookware with a diameter smaller than
the minimum receives only a part of the
power generated by the cooking zone.
•
crack noise: cookware is made of
different materials (a sandwich
construction).
• whistle sound: you use a cooking
zone with a high power level and the
cookware is made of different
materials (a sandwich construction).
• humming: you use a high power level.
• clicking: electric switching occurs.
• hissing, buzzing: the fan operates.
The noises are normal and do not
indicate any malfunction.
6.3 Öko Timer (Eco Timer)
To save energy, the heater of the
cooking zone deactivates before the
count down timer sounds. The difference
in the operation time depends on the
heat setting level and the length of the
cooking operation.
6.4 Examples of cooking
applications
The correlation between the heat setting
of a zone and its consumption of power
is not linear. When you increase the heat
setting, it is not proportional to the
increase of the consumption of power. It
means that a cooking zone with the
medium heat setting uses less than a
half of its power.
The data in the table is for
guidance only.
Refer to "Technical data".
6.2 The noises during operation
If you can hear:
Heat setting
Use to:
Time
(min)
1
Keep cooked food warm.
as nec‐ Put a lid on the cookware.
essary
1-2
Hollandaise sauce, melt: but‐ 5 - 25
ter, chocolate, gelatine.
Mix from time to time.
1-2
Solidify: fluffy omelettes,
baked eggs.
Cook with a lid on.
10 - 40
Hints
ENGLISH
15
Heat setting
Use to:
Time
(min)
Hints
2-3
Simmer rice and milkbased
dishes, heat up readycooked meals.
25 - 50
Add at least twice as much
liquid as rice, mix milk
dishes halfway through the
procedure.
3-4
Steam vegetables, fish,
meat.
20 - 45
Add a couple of tablespoons
of liquid.
4-5
Steam potatoes.
20 - 60
Use max. ¼ l of water for
750 g of potatoes.
4-5
Cook larger quantities of
food, stews and soups.
60 150
Up to 3 l of liquid plus ingre‐
dients.
6-7
Gentle fry: escalope, veal
as nec‐ Turn halfway through.
cordon bleu, cutlets, rissoles, essary
sausages, liver, roux, eggs,
pancakes, doughnuts.
7-8
Heavy fry, hash browns, loin
steaks, steaks.
9
Boil water, cook pasta, sear meat (goulash, pot roast), deep-fry chips.
5 - 15
Turn halfway through.
Boil large quantities of water. PowerBoost is activated.
6.5 Hints and Tips for
Hob²Hood
When you operate the hob with the
function:
•
Protect the hood panel from direct
sunlight.
• Do not spot halogen light on the hood
panel.
• Do not cover the hob control panel.
• Do not interrupt the signal between
the hob and the hood (e.g. with the
hand, a cookware handle or a tall
pot). See the picture.
The hood in the picture is only
exemplary.
Other remotely controlled
appliances may block the
signal. Do not use any such
appliances near to the hob
while Hob²Hood is on.
Cooker hoods with the Hob²Hood
function
To find the full range of cooker hoods
which work with this function refer to our
16
www.electrolux.com
consumer website. The Electrolux cooker
hoods that work with this function must
have the symbol .
7. CARE AND CLEANING
WARNING!
Refer to Safety chapters.
7.1 General information
•
•
•
•
•
Clean the hob after each use.
Always use cookware with a clean
base.
Scratches or dark stains on the
surface have no effect on how the hob
operates.
Use a special cleaner suitable for the
surface of the hob.
Use a special scraper for the glass.
•
•
7.2 Cleaning the hob
•
otherwise, the dirt can cause damage
to the hob. Take care to avoid burns.
Use a special hob scraper on the
glass surface at an acute angle and
move the blade on the surface.
Remove when the hob is
sufficiently cool: limescale rings,
water rings, fat stains, shiny metallic
discoloration. Clean the hob with a
moist cloth and a non-abrasive
detergent. After cleaning, wipe the
hob dry with a soft cloth.
Remove shiny metallic
discoloration: use a solution of water
with vinegar and clean the glass
surface with a cloth.
Remove immediately: melted plastic,
plastic foil, sugar and food with sugar,
8. TROUBLESHOOTING
WARNING!
Refer to Safety chapters.
8.1 What to do if...
Problem
Possible cause
Remedy
You cannot activate or op‐
erate the hob.
The hob is not connected
to an electrical supply or it
is connected incorrectly.
Check if the hob is correct‐
ly connected to the electri‐
cal supply. Refer to the
connection diagram.
The fuse is blown.
Make sure that the fuse is
the cause of the malfunc‐
tion. If the fuse is blown
again and again, contact a
qualified electrician.
You do not set the heat
setting for 50 seconds.
Activate the hob again and
set the heat setting in less
than 50 seconds.
You touched 2 or more
sensor fields at the same
time.
Touch only one sensor
field.
ENGLISH
Problem
17
Possible cause
Remedy
Pause operates.
Refer to "Daily use".
There is water or fat stains
on the control panel.
Clean the control panel.
You cannot select the
maximum heat setting for
one of the cooking zones.
The other zones consume
the maximum available
power.
Your hob works properly.
Reduce the heat setting of
the other cooking zones
connected to the same
phase.
Refer to "Power manage‐
ment".
An acoustic signal sounds
and the hob deactivates.
An acoustic signal sounds
when the hob is deactiva‐
ted.
You put something on one
or more sensor fields.
Remove the object from
the sensor fields.
The hob deactivates.
You put something on the
Remove the object from
the sensor field.
sensor field
.
Residual heat indicator
does not come on.
The zone is not hot be‐
cause it operated only for a
short time or the sensor is
damaged.
If the zone operated suffi‐
ciently long to be hot,
speak to an Authorised
Service Centre.
Hob²Hood does not work.
You covered the control
panel.
Remove the object from
the control panel.
You use a very tall pot
which blocks the signal.
Use a smaller pot, change
the cooking zone or oper‐
ate the hood manually.
The sensor fields become
hot.
The cookware is too large Put large cookware on the
or you put it too near to the rear zones, if possible.
controls.
There is no sound when
The sounds are deactiva‐
you touch the panel sensor ted.
fields.
comes on.
The control bar blinks.
Child Safety Device or
Lock operates.
Activate the sounds. Refer
to "Daily use".
Refer to "Daily use".
There is no cookware on
Put cookware on the zone
the zone or the zone is not so that it fully covers the
fully covered.
cooking zone.
The cookware is unsuita‐
ble.
Use suitable cookware.
Refer to "Hints and tips".
The diameter of the bottom Use cookware with correct
of the cookware is too
dimensions. Refer to
small for the zone.
"Technical data".
18
www.electrolux.com
Problem
and a number come on.
Possible cause
Remedy
There is an error in the
hob.
Deactivate the hob and ac‐
tivate it again after 30 sec‐
onds. If comes on again,
disconnect the hob from
the electrical supply. After
30 seconds, connect the
hob again. If the problem
continues, speak to an Au‐
thorised Service Centre.
You can hear a constant
beep noise.
The electrical connection is Disconnect the hob from
incorrect.
the electrical supply. Ask a
qualified electrician to
check the installation.
8.2 If you cannot find a
solution...
If you cannot find a solution to the
problem yourself, contact your dealer or
an Authorised Service Centre. Give the
data from the rating plate. Make sure,
you operated the hob correctly. If not the
servicing by a service technician or
dealer will not be free of charge, also
during the warranty period. The
instructions about the Service Centre
and conditions of guarantee are in the
guarantee booklet.
9. TECHNICAL DATA
9.1 Rating plate
Model HOP770MF
Typ 62 C4A 20 AA
Induction 7.35 kW
Ser.Nr. .................
ELECTROLUX
PNC 949 596 933 01
220 - 240 V / 400 V 2N 50 - 60 Hz
Made in Germany
7.35 kW
9.2 Cooking zones specification
Cooking zone Nominal pow‐
er (maximum
heat setting)
[W]
PowerBoost
[W]
PowerBoost
maximum du‐
ration [min]
Cookware di‐
ameter [mm]
Left front
2300
3200
10
125 - 210
Left rear
2300
3200
10
125 - 210
Middle rear
2300
3600
10
180 - 240
Right front
1400
2500
4
125 - 145
ENGLISH
Cookware dimensions for the bridge
mode
Bridge Minimum
position cookware
[mm]
Maximum
cookware
[mm]
Left
200 x 420
160 x 360
19
data in the table. It changes with the
material and dimensions of the
cookware.
For optimal cooking results use
cookware no larger than the diameter in
the table.
The power of the cooking zones can be
different in some small range from the
10. ENERGY EFFICIENCY
10.1 Product information according to EU 66/2014 valid for EU
market only
Model identification
HOP770MF
Type of hob
Built-In Hob
Number of cooking zones
4
Heating technology
Induction
Diameter of circular cook‐ Left front
ing zones (Ø)
Left rear
Middle rear
Right front
21.0 cm
21.0 cm
24.0 cm
14.5 cm
Energy consumption per Left front
cooking zone (EC electric Left rear
cooking)
Middle rear
Right front
181.8 Wh / kg
190.8 Wh / kg
189.2 Wh / kg
180.2 Wh / kg
Energy consumption of
the hob (EC electric hob)
185.5 Wh / kg
EN 60350-2 - Household electric cooking
appliances - Part 2: Hobs - Methods for
measuring performance
The energy measurements referring to
the cooking area are identified by the
markings of the respective cooking
zones.
•
•
•
•
10.2 Energy saving
•
You can save energy during everyday
cooking if you follow below hints.
•
When you heat up water, use only the
amount you need.
If it is possible, always put the lids on
the cookware.
Before you activate the cooking zone
put the cookware on it.
Put the smaller cookware on the
smaller cooking zones.
Put the cookware directly in the centre
of the cooking zone.
Use the residual heat to keep the food
warm or to melt it.
11. ENVIRONMENTAL CONCERNS
Recycle materials with the symbol .
Put the packaging in relevant containers
to recycle it. Help protect the
environment and human health by
recycling waste of electrical and
electronic appliances. Do not dispose of
20
www.electrolux.com
product to your local recycling facility or
contact your municipal office.
appliances marked with the symbol
with the household waste. Return the
*
ENGLISH
21
22
www.electrolux.com
ENGLISH
23
867350079-C-312019
www.electrolux.com/shop
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising