AEG | IAE84851FB | User manual | Aeg IAE84851FB User Manual

Aeg IAE84851FB User Manual
IAE84851FB
USER
MANUAL
EN
User Manual
Hob
2
www.aeg.com
CONTENTS
1. SAFETY INFORMATION............................................................................................. 2
2. SAFETY INSTRUCTIONS.............................................................................................4
3. INSTALLATION............................................................................................................7
4. PRODUCT DESCRIPTION...........................................................................................8
5. QUICK GUIDE............................................................................................................. 9
6. BEFORE FIRST USE................................................................................................... 10
7. DAILY USE.................................................................................................................. 11
8. FLEXIBLE INDUCTION COOKING AREA............................................................... 15
9. HINTS AND TIPS........................................................................................................18
10. CARE AND CLEANING.......................................................................................... 20
11. TROUBLESHOOTING............................................................................................. 20
12. TECHNICAL DATA..................................................................................................23
13. ENERGY EFFICIENCY............................................................................................. 24
FOR PERFECT RESULTS
Thank you for choosing this AEG product. We have created it to give you
impeccable performance for many years, with innovative technologies that help
make life simpler - features you might not find on ordinary appliances. Please
spend a few minutes reading to get the very best from it.
Visit our website for:
Get usage advice, brochures, trouble shooter, service information:
www.aeg.com/webselfservice
Register your product for better service:
www.registeraeg.com
Buy Accessories, Consumables and Original spare parts for your appliance:
www.aeg.com/shop
CUSTOMER CARE AND SERVICE
Always use original spare parts.
When contacting our Authorised Service Centre, ensure that you have the
following data available: Model, PNC, Serial Number.
The information can be found on the rating plate.
Warning / Caution-Safety information
General information and tips
Environmental information
Subject to change without notice.
1.
SAFETY INFORMATION
Before the installation and use of the appliance,
carefully read the supplied instructions. The
ENGLISH
3
manufacturer is not responsible for any injuries or
damages that are the result of incorrect installation or
usage. Always keep the instructions in a safe and
accessible location for future reference.
1.1 Children and vulnerable people safety
•
•
•
•
•
•
•
•
This appliance can be used by children aged from 8
years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience
and knowledge if they have been given supervision or
instruction concerning the use of the appliance in a
safe way and understand the hazards involved.
Children between 3 and 8 years of age and persons
with very extensive and complex disabilities shall be
kept away unless continuously supervised.
Children of less than 3 years of age should be kept
away unless continuously supervised.
Do not let children play with the appliance.
Keep all packaging away from children and dispose of
it appropriately.
Keep children and pets away from the appliance when
it operates or when it cools down. Accessible parts are
hot.
If the appliance has a child safety device, it should be
activated.
Children shall not carry out cleaning and user
maintenance of the appliance without supervision.
1.2 General Safety
•
•
•
WARNING: The appliance and its accessible parts
become hot during use. Care should be taken to
avoid touching heating elements.
Do not operate the appliance by means of an external
timer or separate remote-control system.
WARNING: Unattended cooking on a hob with fat or
oil can be dangerous and may result in fire.
4
www.aeg.com
•
•
•
•
•
•
•
•
•
NEVER try to extinguish a fire with water, but switch
off the appliance and then cover flame e.g. with a lid
or a fire blanket.
CAUTION: The cooking process has to be supervised.
A short term cooking process has to be supervised
continuously.
WARNING: Danger of fire: Do not store items on the
cooking surfaces.
Metallic objects such as knives, forks, spoons and lids
should not be placed on the hob surface since they
can get hot.
Do not use a steam cleaner to clean the appliance.
After use, switch off the hob element by its control
and do not rely on the pan detector.
If the glass ceramic surface / glass surface is cracked,
switch off the appliance and unplug it from the mains.
In case the appliance is connected to the mains
directly using junction box, remove the fuse to
disconnect the appliance from power supply. In either
case contact the Authorised Service Centre.
If the supply cord is damaged, it must be replaced by
the manufacturer, an authorized Service or similarly
qualified persons in order to avoid a hazard.
WARNING: Use only hob guards designed by the
manufacturer of the cooking appliance or indicated by
the manufacturer of the appliance in the instructions
for use as suitable or hob guards incorporated in the
appliance. The use of inappropriate guards can cause
accidents.
2. SAFETY INSTRUCTIONS
2.1 Installation
WARNING!
Only a qualified person must
install this appliance.
WARNING!
Risk of injury or damage to
the appliance.
• Remove all the packaging.
• Do not install or use a damaged
appliance.
• Follow the installation instructions
supplied with the appliance.
• Keep the minimum distance from
other appliances and units.
• Always take care when moving the
appliance as it is heavy. Always use
safety gloves and enclosed footwear.
ENGLISH
• Seal the cut surfaces with a sealant to
prevent moisture to cause swelling.
• Protect the bottom of the appliance
from steam and moisture.
• Do not install the appliance adjacent
to a door or under a window. This
prevents hot cookware falling from
the appliance when the door or the
window is opened.
• Each appliance has cooling fans on
the bottom.
• If the appliance is installed above a
drawer:
– Do not store any small pieces or
sheets of paper that could be
pulled in, as they can damage the
cooling fans or impair the cooling
system.
– Keep a distance of minimum 2 cm
between the bottom of the
appliance and parts stored in the
drawer.
• Remove any separator panels
installed in the cabinet below the
appliance.
2.2 Electrical Connection
WARNING!
Risk of fire and electric
shock.
• All electrical connections should be
made by a qualified electrician.
• The appliance must be earthed.
• Before carrying out any operation
make sure that the appliance is
disconnected from the power supply.
• Make sure that the parameters on the
rating plate are compatible with the
electrical ratings of the mains power
supply.
• Make sure the appliance is installed
correctly. Loose and incorrect
electricity mains cable or plug (if
applicable) can make the terminal
become too hot.
• Use the correct electricity mains
cable.
• Do not let the electricity mains cable
tangle.
• Make sure that a shock protection is
installed.
• Use the strain relief clamp on the
cable.
5
• Make sure the mains cable or plug (if
applicable) does not touch the hot
appliance or hot cookware, when you
connect the appliance to the near
sockets.
• Do not use multi-plug adapters and
extension cables.
• Make sure not to cause damage to
the mains plug (if applicable) or to the
mains cable. Contact our Authorised
Service Centre or an electrician to
change a damaged mains cable.
• The shock protection of live and
insulated parts must be fastened in
such a way that it cannot be removed
without tools.
• Connect the mains plug to the mains
socket only at the end of the
installation. Make sure that there is
access to the mains plug after the
installation.
• If the mains socket is loose, do not
connect the mains plug.
• Do not pull the mains cable to
disconnect the appliance. Always pull
the mains plug.
• Use only correct isolation devices: line
protecting cut-outs, fuses (screw type
fuses removed from the holder), earth
leakage trips and contactors.
• The electrical installation must have
an isolation device which lets you
disconnect the appliance from the
mains at all poles. The isolation
device must have a contact opening
width of minimum 3 mm.
2.3 Use
WARNING!
Risk of injury, burns and
electric shock.
• Remove all the packaging, labelling
and protective film (if applicable)
before first use.
• This appliance is for household use
only.
• Do not change the specification of
this appliance.
• Make sure that the ventilation
openings are not blocked.
• Do not let the appliance stay
unattended during operation.
• Set the cooking zone to “off” after
each use.
6
www.aeg.com
• Do not rely on the pan detector.
• Do not put cutlery or saucepan lids on
the cooking zones. They can become
hot.
• Do not operate the appliance with
wet hands or when it has contact with
water.
• Do not use the appliance as a work
surface or as a storage surface.
• If the surface of the appliance is
cracked, disconnect immediately the
appliance from the power supply. This
to prevent an electrical shock.
• Users with a pacemaker must keep a
distance of minimum 30 cm from the
induction cooking zones when the
appliance is in operation.
• When you place food into hot oil, it
may splash.
WARNING!
Risk of fire and explosion
• Fats and oil when heated can release
flammable vapours. Keep flames or
heated objects away from fats and oils
when you cook with them.
• The vapours that very hot oil releases
can cause spontaneous combustion.
• Used oil, that can contain food
remnants, can cause fire at a lower
temperature than oil used for the first
time.
• Do not put flammable products or
items that are wet with flammable
products in, near or on the appliance.
WARNING!
Risk of damage to the
appliance.
• Do not keep hot cookware on the
control panel.
• Do not put a hot pan cover on the
glass surface of the hob.
• Do not let cookware to boil dry.
• Be careful not to let objects or
cookware fall on the appliance. The
surface can be damaged.
• Do not activate the cooking zones
with empty cookware or without
cookware.
• Do not put aluminium foil on the
appliance.
• Cookware made of cast iron,
aluminium or with a damaged bottom
can cause scratches on the glass /
glass ceramic. Always lift these
objects up when you have to move
them on the cooking surface.
• This appliance is for cooking
purposes only. It must not be used for
other purposes, for example room
heating.
2.4 Care and cleaning
• Clean the appliance regularly to
prevent the deterioration of the
surface material.
• Deactivate the appliance and let it
cool down before you clean it.
• Disconnect the appliance from the
electrical supply before maintenance.
• Do not use water spray and steam to
clean the appliance.
• Clean the appliance with a moist soft
cloth. Only use neutral detergents. Do
not use any abrasive products,
abrasive cleaning pads, solvents or
metal objects.
2.5 Service
• To repair the appliance contact an
Authorised Service Centre.
• Use original spare parts only.
2.6 Disposal
WARNING!
Risk of injury or suffocation.
• Contact your municipal authority for
information on how to discard the
appliance correctly.
• Disconnect the appliance from the
mains supply.
• Cut off the mains electrical cable
close to the appliance and dispose of
it.
ENGLISH
3. INSTALLATION
WARNING!
Refer to Safety chapters.
3.1 Before the installation
Before you install the hob, write down
the information bellow from the rating
plate. The rating plate is on the bottom
of the hob.
Serial number ...........................
3.2 Built-in hobs
Only use the built-in hobs after you
assemble the hob into correct built-in
units and work surfaces that align to the
standards.
3.3 Connection cable
• The hob is supplied with a connection
cable.
• To replace the damaged mains cable,
use the cable type: H05V2V2-F which
withstands a temperature of 90°C or
higher. Speak to your local Service
Centre.
3.4 Assembly
min.
500mm
min.
50mm
If the appliance is installed
above a drawer, the hob
ventilation can warm up the
items stored in the drawer
during the cooking process.
7
8
www.aeg.com
4. PRODUCT DESCRIPTION
4.1 Cooking surface layout
3
1
1 Induction cooking zone
2 Control panel
3 Flexible induction cooking area
consisting of four sections
1
2
4.2 Control panel layout
2
1
3
4
12
5
6
7
11
8
10 9
To see the available settings touch the appropriate symbol.
Symbol
Comment
1
ON / OFF
To activate and deactivate the hob.
2
Menu
To open and close the Menu.
3
Zone selection
To open the slider for the selected zone.
Zone indicator
To show for which zone the slider is active.
-
To set the timer functions.
Slider
To adjust the heat setting.
7
PowerBoost
To activate the function.
8
Lock
To activate and deactivate the function.
-
The window of the Hob²Hood infrared signal communicator. Do not cover it.
4
-
5
6
9
-
ENGLISH
Symbol
10
11
0-9
12
9
Comment
Pause
To activate and deactivate the function.
-
To show the current heat setting.
FlexiBridge
To switch between three modes of the function.
4.3 OptiHeat Control (3 step
Residual heat indicator)
WARNING!
III / II / I There is a risk of
burns from residual heat.
The indicator shows the level
of the residual heat.
The induction cooking zones produce
the heat necessary for the cooking
process directly in the bottom of the
cookware. The glass ceramic is heated by
the heat of the cookware.
5. QUICK GUIDE
5.1 Using the touchscreen
• To activate a given option touch the
relevant symbol on the display.
• The selected function is activated
when you remove the finger from the
display.
• To scroll the available options use a
quick gesture or drag your finger
across the display.
• The speed of the gesture determines
how fast the screen moves.
• The scrolling can stop by itself or you
can stop it immediately if you touch
the display.
• You can change most of the
parameters shown on the display
when you touch the relevant symbols.
• To select the required function or
time you can scroll through the list
Menu
Assisted Cooking
Hob Functions
PowerSlide
Melting
•
•
•
•
and/or touch the option you want to
choose.
When the hob is activated, and some
of the symbols disappear from the
display, touch the display anywhere.
All the symbols come back on.
For certain functions a pop-up
window with additional information
appears when you start them.
Only the backlit symbols can be used.
Select a zone first to activate the timer
functions.
5.2 Menu structure
Touch
to access and change the
settings of the hob or activate some
functions. The table shows the basic
Menu structure.
10
www.aeg.com
Settings
Child Lock
Stopwatch
Hob²Hood
H0 - Off
H1 - Light only
H2 - Fan speed low
H3 - Auto Fan Low
H4 - Auto Fan Medium
H5 - Auto Fan High
H6 - Auto Fan Boost
Setup
Assisted Cooking
Language
Key Tones
Buzzer Volume
Display Brightness
Service
Demo Mode
License
Show Software Version
Alarm History
Reset All Settings
To leave the Menu touch
or the right
side of the display, outside of the pop-up
window. To navigate through the Menu
description appears. Follow the tips to
easily navigate through the Menu.
use or .
scroll the list up and use or touch
leave the Menu.
When you touch and hold some of the
options available in the Menu, a short
If you are at the bottom of the Menu
6. BEFORE FIRST USE
WARNING!
Refer to Safety chapters.
6.1 First connection to the
mains
When you connect the hob to the mains
you have to set Language, Display
Brightness and Buzzer Volume.
You can change the setting in Menu >
Settings > Setup. Refer to "Daily use".
to
ENGLISH
11
7. DAILY USE
WARNING!
Refer to Safety chapters.
7.1 Activating and
deactivating
Touch
for 1 second to activate or
deactivate the hob.
7.2 Automatic Switch Off
The function deactivates the hob
automatically if:
• all cooking zones are deactivated,
• you do not set the heat setting after
you activate the hob,
• you spill or put something on the
control panel for more than 10
seconds (a pan, a cloth, etc.). An
acoustic signal sounds and the hob
deactivates. Remove the object or
clean the control panel.
• the hob gets too hot (e.g. when a
saucepan boils dry). Let the cooking
zone cool down before you use the
hob again.
• you use incorrect cookware or there is
no cookware on a given zone. The
white cooking zone symbol blinks and
the induction cooking zone
deactivates automatically after 1
minute.
• you do not deactivate a cooking zone
or change the heat setting. After
some time a message comes on and
the hob deactivates.
The relation between the heat setting
and the time after which the hob
deactivates:
Heat setting
The hob deactivates after
1-2
6 hours
3-5
5 hours
6
4 hours
7-9
1.5 hour
7.3 Heat setting
1. Activate the hob.
2. Place the pot on the selected
cooking zone.
The slider for the active cooking zone
appears on the display and is active for 8
seconds.
3. Touch or slide your finger to set the
desired heat setting.
The symbol turns red and becomes
bigger.
7.4 Using the cooking zones
Place the cookware in the centre of the
selected cooking zone. Induction
cooking zones adapt to the dimensions
of the bottom of the cookware
automatically.
Once you place a pot on the selected
cooking zone the hob automatically
detects it and the relevant slider appears
on the display. The slider is visible for 8
seconds, after that time the display goes
back to the main view. To close the slider
faster tap the screen outside of the slider
area.
When other zones are active the heat
setting for the zone you want to use may
be limited. Refer to "Power
Management".
Make sure that the pot is
suitable for induction hobs.
For more information on
cookware types refer to
"Hints and tips". Check the
size of the pot in "Technical
data".
7.5 PowerBoost
This function activates more power for
the appropriate induction cooking zone;
it depends on the cookware size. The
12
www.aeg.com
function can be activated only for a
limited period of time.
1. Touch the desired zone symbol first.
2. Touch
or slide your finger to the
right to activate the function for the
chosen cooking zone.
The symbol turns red and becomes
bigger.
The function deactivates automatically.
To deactivate the function manually
select the zone and change its heat
setting.
For maximum duration
values, refer to "Technical
data".
7.7 Timer
+STOP
Count Down Timer
Use this function to specify how long a
cooking zone should operate during a
single cooking session.
You can set the function for each
cooking zone separately.
1. Set the heat setting for the
appropriate cooking zone first and
then set the function.
2. Touch the zone symbol.
3. Touch .
The timer menu window appears on the
display.
7.6 Power Management
4. Check
• Cooking zones are grouped
according to the location and number
of the phases in the hob. See the
illustration.
• Each phase has a maximum electricity
loading of 3680 W.
• The function divides the power
between cooking zones connected to
the same phase.
• The function activates when the total
electricity loading of the cooking
zones connected to a single phase
exceeds 3680 W.
• The function decreases the power of
the other cooking zones connected to
the same phase, which has an
influence on the available heat
setting.
• The maximum heat setting is visible
on the slider. Only the digits in white
are active.
• If a higher heat setting is not available
reduce it for the other cooking zones
first.
The symbols change to
.
5. Slide your finger to the left or right to
select the desired time (e.g. hours
and/or minutes).
6. Touch OK to confirm your selection.
to activate the function.
+STOP
You can also choose
to cancel your
selection.
When the time comes to an end, a signal
sounds and
the signal.
blinks. Touch
to stop
To deactivate the function set the heat
setting to 0. Alternatively, touch
+STOP
to
the left of the timer value, touch
next
to it and confirm your choice when a
pop-up window appears.
Minute Minder
You can use this function when the hob is
activated but the cooking zones do not
operate.
The function has no effect on the
operation of the cooking zones.
1. Select any cooking zone.
The relevant slider appears on the
display.
2. Touch .
The timer menu window appears on the
display.
3. Slide your finger to the left or right to
select the desired time (e.g. hours
and minutes).
4. Touch OK to confirm your selection.
ENGLISH
You can also choose
to cancel your
selection.
When the time comes to an end, a signal
sounds and
the signal.
flashes. Touch
to stop
To deactivate the function touch
to
next
the left of the timer value, touch
to it and confirm your choice when a
pop-up window appears.
To deactivate the function touch
13
.
The function stops PowerBoost. The
highest heat setting reactivates when you
touch
again.
7.9 Lock
You can lock the control panel while the
hob operates. It prevents an accidental
change of the heat setting.
Set the heat setting first.
Stopwatch
The function automatically starts
counting immediately after you activate a
cooking zone. You can use this function
to monitor how long it operates.
1. Touch
to access the Menu.
2. Scroll the Menu to select Settings >
Stopwatch.
3. Touch the switch to turn the function
on / off.
or the right
To leave the Menu touch
side of the display, outside of the pop-up
window. To navigate through the Menu
Touch
to activate the function.
To deactivate the function, touch
seconds.
for 3
When you deactivate the
hob, you also deactivate this
function.
7.10 Child Lock
This function prevents an accidental
operation of the hob.
again manually touch , select Reset
from the pop-up window. The function
starts counting from 0. To Pause the
function for one cooking session touch
1. Touch
on the display to open the
Menu.
2. Select Settings > Child Lock from the
list.
3. Turn the switch on and touch the
letters A-O-X in the alphabetical
order to activate the function. To
deactivate the function turn the
switch off.
and select Pause from the pop-up
window. Select Start to continue
counting.
or the right
To leave the Menu touch
side of the display, outside of the pop-up
window. To navigate through the Menu
use or .
The function does not stop when you lift
the pot. To reset the function and start it
use or .
7.8 Pause
This function sets all cooking zones that
operate to the lowest heat setting.
When the function operates only
and
symbols can be used. All other
symbols on the control panel are locked.
The function does not stop the timer
functions.
Touch
to activate the function.
comes on. The heat setting is lowered
to 1.
7.11 Language
1. Touch
on the display to open the
Menu.
2. Select Settings > Setup > Language
from the list.
3. Choose the appropriate language
from the list.
If you chose the wrong language touch
. From the list that comes on select
the third option and then twice the last
option. Finally, choose the option on the
right.
14
www.aeg.com
To leave the Menu touch
or the right
side of the display, outside of the pop-up
window. To navigate through the Menu
use or .
7.12 Key Tones / Buzzer
Volume
You can choose the type of sound your
hob emits or turn the sounds off. You can
choose between the click (default) or
beep.
1. Touch
on the display to open the
Menu.
2. Select Settings > Setup> Key Tones /
Buzzer Volume from the list.
3. Choose the appropriate option.
To leave the Menu touch
or the right
side of the display, outside of the pop-up
window. To navigate through the Menu
use or .
7.13 Display Brightness
You can change the brightness of the
display.
There are 4 brightness levels, 1 is the
lowest and 4 is the highest.
1. Touch
on the display to open the
Menu.
2. Select Settings >Setup > Display
Brightness from the list.
3. Choose the appropriate level.
or the right
To leave the Menu touch
side of the display, outside of the pop-up
window. To navigate through the Menu
use or .
7.14
Assisted Cooking
This function adjusts the temperature to
different types of food and maintains it
throughout cooking. It can only be
activated for the left front cooking zone
or both zones on the left when bridged.
1. Touch
on the display to open the
Menu.
2. Select Assisted Cooking and choose
the type of food you would like to
prepare from the list.
For each type of food there are a few
options available. Follow the
instructions shown on the display.
• You can touch OK on top of the
pop-up window to use the default
settings.
• You can set the timer function.
When the pot reaches the
intended temperature you can
activate the timer.
• You can change the default heat
level.
3. Once the pot reaches the intended
temperature an acoustic signal
sounds and a pop-up window
appears. To close the window and
start the function touch OK. To
deactivate the window permanently
check
before you activate the
function.
To stop the function touch
and Stop
and select Assisted
or touch
Cooking, choose any type of food and
touch Stop.
To leave the Menu touch
or the right
side of the display, outside of the pop-up
window. To navigate through the Menu
use or .
7.15
Melting
You can use this function to melt
different products, e.g. chocolate or
butter. You can use the function only for
one cooking zone during one cooking
session.
1. Touch
on the display to open the
Menu.
2. Select Hob Functions > Melting from
the list.
3. Touch Start
You need to select the desired zone.
A pop-up window appears asking if
you want to cancel the previous heat
setting if there was any.
or the right
To leave the Menu touch
side of the display, outside of the pop-up
window. To navigate through the Menu
use or .
To stop the function touch the zone
selection symbol and then touch Stop.
ENGLISH
7.16 Hob²Hood
It is an advanced automatic function
which connects the hob to a special
hood. Both the hob and the hood have
an infrared signal communicator. The
speed of the fan is defined automatically
on the basis of the mode setting and the
temperature of the hottest pot on the
hob.
For most of the hoods the remote
system is originally deactivated. Activate
it before you use the function. For more
information refer to the hood user
manual.
The function operates automatically
between H2 and H6. The hob is originally
set to H5. The hood reacts whenever you
operate the hob. The hob recognizes the
temperature of the cookware
automatically and adjusts the speed of
the fan. You can set the hob to activate
only the light by selecting H1.
If you change the fan speed
on the hood, the default
connection with the hob is
deactivated. To reactivate
the function, turn both
appliances OFF and ON
again.
15
Mod Autoe
matic
light
Boiling1)
H4
On
Fan speed 1 Fan speed 1
H5
On
Fan speed 1 Fan speed 2
H6
On
Fan speed 2 Fan speed 3
Frying2)
1) The hob detects the boiling process and activates fan speed in accordance with the automatic
mode.
2) The hob detects the frying process and activates fan speed in accordance with the automatic
mode.
3) This mode activates the fan and the light and
does not rely on the temperature.
Changing the modes
The modes change and adjust
automatically. If you are not satisfied with
the noise level / fan speed, you can also
switch between modes manually.
1. Touch
.
Select Settings > Hob²Hood from the
list.
2. Choose the appropriate mode.
To leave the Menu touch
or the right
side of the display, outside of the pop-up
window.
Mod Autoe
matic
light
Boiling1)
Frying2)
H0
Off
Off
Off
H1
On
Off
Off
H23)
On
Fan speed 1 Fan speed 1
When you finish cooking and deactivate
the hob, the hood fan may still operate
for a certain period of time. After that
time the system deactivates the fan
automatically and prevents you from an
accidental activation for the next 30
seconds.
H3
On
Off
The light on the hood deactivates 2
minutes after deactivating the hob.
Fan speed 1
8. FLEXIBLE INDUCTION COOKING AREA
WARNING!
Refer to Safety chapters.
8.1 FlexiBridge
The area on the left side can be
combined into two cooking zones with
different sizes, or into one large cooking
area. You may choose a combination of 4
sections which depends on the size of
the cookware you want to use. The
cooking zone indicators change
automatically and show the possible
combination.
16
www.aeg.com
FlexiBridge Standard is the default mode
which activates automatically when you
activate the hob. Two cooking zones
operate independently.
one cooking zone. The front section is
not connected and operates as a
separate cooking zone. You can set the
heat setting for each zone separately.
Touch
to switch between the
FlexiBridge modes.
8.2 FlexiBridge Standard
mode
This mode is active when you activate
the hob. It connects the sections into two
separate cooking zones. You can set the
heat setting for each zone separately.
Correct cookware position:
To use this mode you have to place the
cookware on the three connected
sections. If you use cookware smaller
blinks on the
than two sections the
display and after 1 minute the zone
switches off.
Correct cookware position:
Incorrect cookware position:
Incorrect cookware position:
8.4 FlexiBridge Max Bridge
mode
8.3 FlexiBridge Big Bridge
mode
To activate the mode touch
until you
see the correct mode indicator . This
mode connects three rear sections into
To activate the mode touch
until you
see the correct mode indicator . This
mode connects all sections into one
cooking zone.
ENGLISH
17
settings. The hob detects the position of
the cookware and adjusts the pre-set
power level accordingly. You can place
the pot in the front, middle or rear
position. If you place the cookware at the
front you get the highest heat setting
(i.e. 9). To decrease it, move the
cookware to the middle (heat setting - 5)
or rear position (heat setting -1).
Correct cookware position:
To use this mode you have to place the
cookware on the four connected
sections. If you use cookware smaller
than three sections the display shows
and after 1 minute the zone switches off.
Incorrect cookware position:
8.5 PowerSlide
This function allows you to adjust the
temperature by moving the cookware to
a different position on the induction
cooking surface. This function
automatically divides the left cooking
zones into three areas with different heat
Use only one pot with a
minimum bottom diameter
of 160 mm when you
operate the function.
1. Touch
once.
2. Scroll the Menu > Hob Functions to
select the function from the list.
• If any of the left zones operates a
pop-up window appears asking
you to confirm whether or not you
want to cancel the previous heat
settings.
• The symbol and the symbols of
three zones with default heat
settings appear on the display.
You can change the default heat
setting in accordance with your
needs and the heat setting will be
saved for future use.
3. Place the pot on the cooking zone
with the desired heat setting.
Place the cookware in the centre of
the desired zone and make sure you
do not cover the neighbouring
zones. Red indicators come on.
Unless you see the red indicators the
function cannot be activated.
If you want to change the position of
the pot lift it up and place on a
different zone. Sliding the cookware
can cause scratches and
discolouration of the surface.
To deactivate the function touch , a
pop-up window appears. Touch Stop to
deactivate the function. You can also
deactivate the function from the Menu.
Move the pot from time to
time. The function
deactivates after 10 minutes
of inactivity.
18
www.aeg.com
9. HINTS AND TIPS
WARNING!
Refer to Safety chapters.
9.1 Cookware
For induction cooking zones
a strong electro-magnetic
field creates the heat in the
cookware very quickly.
Use the induction cooking
zones with suitable
cookware.
Cookware material
• correct: cast iron, steel, enamelled
steel, stainless steel, multi-layer
bottom (with a correct marking from a
manufacturer).
• not correct: aluminium, copper,
brass, glass, ceramic, porcelain.
Cookware is suitable for an induction
hob if:
• water boils very quickly on a zone set
to the highest heat setting.
• a magnet pulls on to the bottom of
the cookware.
The bottom of the cookware
must be as thick and flat as
possible.
Ensure pan bases are clean
and dry before placing on
the hob surface.
Cookware dimensions
Induction cooking zones adapt to the
dimension of the bottom of the
cookware automatically.
The cooking zone efficiency is related to
the diameter of the cookware. The
cookware with a diameter smaller than
the minimum receives only a part of the
power generated by the cooking zone.
Refer to "Technical data".
9.2 The noises during
operation
If you can hear:
• crack noise: cookware is made of
different materials (a sandwich
construction).
• whistle sound: you use a cooking
zone with a high power level and the
cookware is made of different
materials (a sandwich construction).
• humming: you use a high power level.
• clicking: electric switching occurs, the
pot is detected after you place it on
the hob.
• hissing, buzzing: the fan operates.
The noises are normal and do not
indicate any malfunction.
9.3 Öko Timer (Eco Timer)
To save energy, the heater of the
cooking zone deactivates before the
count down timer sounds. The difference
in the operation time depends on the
heat setting level and the length of the
cooking operation.
9.4 Examples of cooking
applications
The correlation between the heat setting
of a zone and its consumption of power
is not linear. When you increase the heat
setting, it is not proportional to the
increase of the consumption of power. It
means that a cooking zone with the
medium heat setting uses less than a half
of its power.
The data in the table is for
guidance only.
ENGLISH
19
Heat setting
Use to:
Time
(min)
Hints
1
Keep cooked food warm.
as necessary
Put a lid on the cookware.
1-2
Hollandaise sauce, melt: butter, chocolate, gelatine.
5 - 25
Mix from time to time.
1-2
Solidify: fluffy omelettes,
baked eggs.
10 - 40
Cook with a lid on.
2-3
Simmer rice and milkbased
dishes, heat up ready-cooked
meals.
25 - 50
Add at least twice as much liquid as rice, mix milk dishes
halfway through the procedure.
3-4
Steam vegetables, fish, meat.
20 - 45
Add a couple of tablespoons
of liquid.
4-5
Steam potatoes.
20 - 60
Use max. ¼ l of water for 750 g
of potatoes.
4-5
Cook larger quantities of food, 60 - 150
stews and soups.
Up to 3 l of liquid plus ingredients.
6-7
Gentle fry: escalope, veal cordon bleu, cutlets, rissoles,
sausages, liver, roux, eggs,
pancakes, doughnuts.
as necessary
Turn halfway through.
7-8
Heavy fry, hash browns, loin
steaks, steaks.
5 - 15
Turn halfway through.
9
Boil water, cook pasta, sear meat (goulash, pot roast), deep-fry chips.
Boil large quantities of water. PowerBoost is activated.
9.5 Hints and Tips for
Hob²Hood
When you operate the hob with the
function:
• Protect the hood panel from direct
sunlight.
• Do not spot halogen light on the
hood panel.
• Do not cover the hob control panel.
• Do not interrupt the signal between
the hob and the hood (e.g. with the
hand, a cookware handle or a tall
pot). See the picture.
The hood in the picture is only
exemplary.
20
www.aeg.com
Keep the window of the
Hob²Hood infrared signal
communicator clean.
Other remotely controlled
appliances may block the
signal. Do not use any such
appliances near to the hob
while Hob²Hood is on.
Cooker hoods with the Hob²Hood
function
To find the full range of cooker hoods
which work with this function refer to our
consumer website. The AEG cooker
hoods that work with this function must
have the symbol .
10. CARE AND CLEANING
WARNING!
Refer to Safety chapters.
10.1 General information
• Clean the hob after each use.
• Always use cookware with a clean
base.
• Scratches or dark stains on the surface
have no effect on how the hob
operates.
• Use a special cleaner suitable for the
surface of the hob.
• Use a special scraper for the glass.
The printing on the flexible
induction cooking area may
become dirty or change its
colour from sliding the
cookware. You can clean the
area in a standard way.
otherwise, the dirt can cause damage
to the hob. Take care to avoid burns.
Use a special hob scraper on the glass
surface at an acute angle and move
the blade on the surface.
• Remove when the hob is sufficiently
cool: limescale rings, water rings, fat
stains, shiny metallic discoloration.
Clean the hob with a moist cloth and
a non-abrasive detergent. After
cleaning, wipe the hob dry with a soft
cloth.
• Remove shiny metallic
discoloration: use a solution of water
with vinegar and clean the glass
surface with a cloth.
• The surface of the hob has horizontal
grooves. Clean the hob with a moist
cloth and some detergent with
smooth movement from left to right.
After cleaning, wipe the hob dry with
a soft cloth from left to right.
10.2 Cleaning the hob
• Remove immediately: melted plastic,
plastic foil, sugar and food with sugar,
11. TROUBLESHOOTING
WARNING!
Refer to Safety chapters.
11.1 What to do if...
Problem
Possible cause
You cannot activate or oper- The hob is not connected to
ate the hob.
an electrical supply or it is
connected incorrectly.
Remedy
Check if the hob is correctly
connected to the electrical
supply. Refer to the connection diagram.
ENGLISH
Problem
The display does not react
to the touch.
21
Possible cause
Remedy
The fuse is blown.
Make sure that the fuse is
the cause of the malfunction.
If the fuse is blown again
and again, contact a qualified electrician.
You do not set the heat setting for 60 seconds.
Activate the hob again and
set the heat setting in less
than 60 seconds.
You touched 2 or more sensor fields at the same time.
Touch only one sensor field.
Pause operates.
Refer to "Daily use".
Part of the display is covered
or the pots are placed too
near to the display.
There is some liquid or an
object on the display.
Remove the objects. Move
the pots away from the display.
Clean the display, wait until
the appliance is cold. Disconnect the hob from the
electrical supply. After 1 min,
connect the hob again.
An acoustic signal sounds
You put something on one
and the hob deactivates.
or more sensor fields.
An acoustic signal sounds
when the hob is deactivated.
Remove the object from the
sensor fields.
The hob deactivates.
Remove the object from the
sensor field.
You put something on the
sensor field
.
Residual heat indicator does
not come on.
The zone is not hot because
it operated only for a short
time or the sensor is damaged.
If the zone operated sufficiently long to be hot, speak
to an Authorised Service
Centre.
You cannot activate the
highest heat setting.
Another zone is already set
to the highest heat setting.
First reduce the power of the
other zone.
The sensor fields become
hot.
The cookware is too large or Put large cookware on the
you put it too near to the
rear zones if possible.
controls.
Hob²Hood does not work.
You covered the control
panel.
Remove the object from the
control panel.
Hob²Hood operates, but on- You activated the H1 mode.
ly the light is on.
Change the mode to H2 - H6
or wait until the automatic
mode starts.
Hob²Hood modes H1 - H6
operate, but the light is off.
Contact an Authorised Service Centre.
There might be a problem
with the light bulb.
22
www.aeg.com
Problem
Possible cause
Remedy
There is no sound when you
touch the panel sensor
fields.
The sounds are deactivated.
Activate the sounds. Refer to
"Daily use".
Wrong language is set.
You changed the language
by mistake.
Reset all functions to the factory settings. Select Reset All
Settings from the Menu.
Disconnect the hob from the
electrical supply. After 1 min,
connect the hob again. Set
Language, Display Brightness and Buzzer Volume.
The flexible induction cooking area does not heat up
the cookware.
The cookware is in a wrong
position on the flexible induction cooking area.
Place the cookware in the
correct position on the flexible induction cooking area.
The position of the cookware depends on the activated function or function
mode. Refer to "Flexible induction cooking area".
The diameter of the bottom
of the cookware is incorrect
for the activated function or
function mode.
Use cookware with a diameter applicable to the activated function or function
mode. Use cookware with a
diameter smaller than 160
mm on a single section of
the flexible induction cooking area. Refer to "Flexible
induction cooking area".
A cooking zone deactivates. Automatic Switch Off deacti- Refer to "Daily use".
A warning message saying
vates the cooking zone.
Deactivate the hob and actithe cooking zone is going to
vate it again.
switch off comes on.
and a message come on.
O - X - A appears.
blinks.
Lock operates.
Refer to "Daily use".
Child Lock operates.
Refer to "Daily use".
There is no cookware on the
zone.
Put cookware on the zone.
The cookware is unsuitable.
Use suitable cookware. Refer
to "Hints and tips".
The diameter of the bottom
of the cookware is too small
for the zone.
Use cookware with correct
dimensions. Refer to "Technical data".
ENGLISH
Problem
and a number come on.
23
Possible cause
Remedy
FlexiBridge operates. One
or more sections of the function mode which operates
are not covered by the cookware.
Place the cookware on the
correct number of sections
of the function mode which
operates or change the function mode. Refer to "Flexible induction cooking area".
PowerSlide operates. Two
pots are placed on the flexible induction cooking area.
Use only one pot. Refer to
"Flexible induction cooking
area".
There is an error in the hob.
Deactivate the hob and activate it again after 30 seconds. If
comes on again,
disconnect the hob from the
electrical supply. After 30
seconds, connect the hob
again. If the problem continues, speak to an Authorised
Service Centre.
You can hear a constant
beep noise.
The electrical connection is
incorrect.
11.2 If you cannot find a
solution...
If you cannot find a solution to the
problem yourself, contact your dealer or
an Authorised Service Centre. Give the
data from the rating plate. Make sure,
you operated the hob correctly. If not the
Disconnect the hob from the
electrical supply. Ask a qualified electrician to check the
installation.
servicing by a service technician or
dealer will not be free of charge, also
during the warranty period. The
instructions about the Service Centre and
conditions of guarantee are in the
guarantee booklet.
12. TECHNICAL DATA
12.1 Rating plate
Model IAE84851FB
Typ 62 D4A 05 CA
Induction 7.35 kW
Ser.Nr. .................
AEG
12.2 Software Licences
The software included in the hob
contains copyrighted software that is
licensed under the BSD, fontconfig, FTL,
PNC 949 597 550 00
220 - 240 V / 400 V 2N 50 - 60 Hz
Made in Germany
7.35 kW
GPL-2.0, LGPL-2.0, LGPL-2.1, libJpeg,
zLib/ libpng, MIT, OpenSSL / SSLEAY
ISC, Apache 2.0 and others.
Check the full copy of the licence in:
Menu > Settings > Service > License.
24
www.aeg.com
You can download the source code of
the open source software by following
the hyperlink present in the web product
page.
12.3 Cooking zones specification
Cooking zone
Nominal power PowerBoost
(maximum heat [W]
setting) [W]
PowerBoost
Cookware diammaximum dura- eter [mm]
tion [min]
Middle rear
2300
3200
10
125 - 210
Right front
1800
2800
10
145 - 180
Flexible induction cooking
area
2300
3200
10
minimum 100
The power of the cooking zones can be
different in some small range from the
data in the table. It changes with the
material and dimensions of the
cookware.
For optimal cooking results use
cookware no larger than the diameter in
the table.
13. ENERGY EFFICIENCY
13.1 Product information according to EU 66/2014 valid for EU
market only
Model identification
IAE84851FB
Type of hob
Built-In Hob
Number of cooking zones
2
Number of cooking areas
1
Heating technology
Induction
Diameter of circular cooking zones (Ø)
Middle rear
Right front
21.0 cm
18.0 cm
Lenght (L) and width (W) of
the cooking area
Left
L 45.6 cm
W 21.6 cm
Energy consumption per
cooking zone (EC electric
cooking)
Middle rear
Right front
189.1 Wh / kg
178.3 Wh / kg
Energy consumption of the Left
cooking area (EC electric
cooking)
187.0 Wh / kg
Energy consumption of the
hob (EC electric hob)
185.7 Wh / kg
ENGLISH
EN 60350-2 - Household electric cooking
appliances - Part 2: Hobs - Methods for
measuring performance
13.2 Energy saving
You can save energy during everyday
cooking if you follow below hints.
• When you heat up water, use only the
amount you need.
25
• If it is possible, always put the lids on
the cookware.
• Before you activate the cooking zone
put the cookware on it.
• Put the smaller cookware on the
smaller cooking zones.
• Put the cookware directly in the
centre of the cooking zone.
• Use the residual heat to keep the
food warm or to melt it.
14. ENVIRONMENTAL CONCERNS
Recycle materials with the symbol .
Put the packaging in relevant containers
to recycle it. Help protect the
environment and human health by
recycling waste of electrical and
electronic appliances. Do not dispose of
*
appliances marked with the symbol
with the household waste. Return the
product to your local recycling facility or
contact your municipal office.
26
www.aeg.com
ENGLISH
27
867350258-A-412018
www.aeg.com/shop
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising