Husqvarna | QHIO660P | User manual | Husqvarna QHIO660P User Manual

Husqvarna QHIO660P User Manual
QHIO660P
USER
MANUAL
EN
User Manual
Hob
2
www.husqvarna-electrolux.se
CONTENTS
1. SAFETY INFORMATION................................................................................................... 3
2. SAFETY INSTRUCTIONS...................................................................................................5
3. INSTALLATION..................................................................................................................7
4. PRODUCT DESCRIPTION.................................................................................................8
5. DAILY USE.......................................................................................................................... 9
6. HINTS AND TIPS..............................................................................................................14
7. CARE AND CLEANING...................................................................................................16
8. TROUBLESHOOTING..................................................................................................... 16
9. TECHNICAL DATA.......................................................................................................... 18
10. ENERGY EFFICIENCY................................................................................................... 19
DEAR CUSTOMER
Thank you for choosing this Husqvarna-Electrolux product. We have created it to
give you impeccable performance for many years, with innovative technologies that
help make life simpler – features you might not find on ordinary appliances. Please
spend a few minutes reading to get the very best from it.
Visit our website for:
Get usage advice, brochures, trouble shooter, service information:
www.husqvarna-electrolux.se
Register your product for better service:
www.husqvarna-electrolux.se
Buy Accessories, Consumables and Original spare parts for your appliance:
www.husqvarna-electrolux.se/shop
CUSTOMER CARE AND SERVICE
Always use original spare parts.
When contacting our Authorised Service Centre, ensure that you have the following
data available: Model, PNC, Serial Number.
The information can be found on the rating plate.
Warning / Caution-Safety information
General information and tips
Environmental information
Subject to change without notice.
ENGLISH
1.
3
SAFETY INFORMATION
Before the installation and use of the appliance,
carefully read the supplied instructions. The
manufacturer is not responsible for any injuries or
damage that are the result of incorrect installation or
usage. Always keep the instructions in a safe and
accessible location for future reference.
1.1 Children and vulnerable people safety
•
•
•
•
•
•
•
•
This appliance can be used by children aged from 8
years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience
and knowledge if they have been given supervision or
instruction concerning the use of the appliance in a
safe way and understand the hazards involved.
Children between 3 and 8 years of age and persons
with very extensive and complex disabilities shall be
kept away from the appliance unless continuously
supervised.
Children of less than 3 years of age should be kept
away from the appliance unless continuously
supervised.
Do not let children play with the appliance.
Keep all packaging away from children and dispose of
it appropriately.
Keep children and pets away from the appliance when
it operates or when it cools down. Accessible parts
may become hot during use.
If the appliance has a child safety device, it should be
activated.
Children shall not carry out cleaning and user
maintenance of the appliance without supervision.
1.2 General Safety
•
WARNING: The appliance and its accessible parts
become hot during use. Care should be taken to
avoid touching heating elements.
4
www.husqvarna-electrolux.se
•
•
•
•
•
•
•
•
•
•
•
•
WARNING: Unattended cooking on a hob with fat or
oil can be dangerous and may result in fire.
NEVER try to extinguish a fire with water, but switch
off the appliance and then cover flame e.g. with a lid
or a fire blanket.
CAUTION: The appliance must not be supplied
through an external switching device, such as a timer,
or connected to a circuit that is regularly switched on
and off by a utility.
CAUTION: The cooking process has to be supervised.
A short term cooking process has to be supervised
continuously.
WARNING: Danger of fire: Do not store items on the
cooking surfaces.
Metallic objects such as knives, forks, spoons and lids
should not be placed on the hob surface since they
can get hot.
Do not use the appliance before installing it in the
built-in structure.
Do not use a steam cleaner to clean the appliance.
After use, switch off the hob element by its control
and do not rely on the pan detector.
If the glass ceramic surface / glass surface is cracked,
switch off the appliance and unplug it from the mains.
In case the appliance is connected to the mains
directly using junction box, remove the fuse to
disconnect the appliance from power supply. In either
case contact the Authorised Service Centre.
If the supply cord is damaged, it must be replaced by
the manufacturer, an authorized Service or similarly
qualified persons in order to avoid a hazard.
WARNING: Use only hob guards designed by the
manufacturer of the cooking appliance or indicated by
the manufacturer of the appliance in the instructions
for use as suitable or hob guards incorporated in the
appliance. The use of inappropriate guards can cause
accidents.
ENGLISH
5
2. SAFETY INSTRUCTIONS
2.1 Installation
WARNING!
Only a qualified person must
install this appliance.
WARNING!
Risk of injury or damage to
the appliance.
• Remove all the packaging.
• Do not install or use a damaged
appliance.
• Follow the installation instructions
supplied with the appliance.
• Keep the minimum distance from
other appliances and units.
• Always take care when moving the
appliance as it is heavy. Always use
safety gloves and enclosed footwear.
• Seal the cut surfaces with a sealant to
prevent moisture to cause swelling.
• Protect the bottom of the appliance
from steam and moisture.
• Do not install the appliance adjacent
to a door or under a window. This
prevents hot cookware falling from
the appliance when the door or the
window is opened.
• Each appliance has cooling fans on
the bottom.
• If the appliance is installed above a
drawer:
– Do not store any small pieces or
sheets of paper that could be
pulled in, as they can damage the
cooling fans or impair the cooling
system.
– Keep a distance of minimum 2 cm
between the bottom of the
appliance and parts stored in the
drawer.
• Remove any separator panels
installed in the cabinet below the
appliance.
2.2 Electrical Connection
WARNING!
Risk of fire and electric
shock.
• All electrical connections should be
made by a qualified electrician.
• The appliance must be earthed.
• Before carrying out any operation
make sure that the appliance is
disconnected from the power supply.
• Make sure that the parameters on the
rating plate are compatible with the
electrical ratings of the mains power
supply.
• Make sure the appliance is installed
correctly. Loose and incorrect
electricity mains cable or plug (if
applicable) can make the terminal
become too hot.
• Use the correct electricity mains
cable.
• Do not let the electricity mains cable
tangle.
• Make sure that a shock protection is
installed.
• Use the strain relief clamp on the
cable.
• Make sure the mains cable or plug (if
applicable) does not touch the hot
appliance or hot cookware, when you
connect the appliance to the near
sockets.
• Do not use multi-plug adapters and
extension cables.
• Make sure not to cause damage to
the mains plug (if applicable) or to the
mains cable. Contact our Authorised
Service Centre or an electrician to
change a damaged mains cable.
• The shock protection of live and
insulated parts must be fastened in
such a way that it cannot be removed
without tools.
• Connect the mains plug to the mains
socket only at the end of the
installation. Make sure that there is
access to the mains plug after the
installation.
• If the mains socket is loose, do not
connect the mains plug.
• Do not pull the mains cable to
disconnect the appliance. Always pull
the mains plug.
• Use only correct isolation devices: line
protecting cut-outs, fuses (screw type
fuses removed from the holder), earth
leakage trips and contactors.
• The electrical installation must have
an isolation device which lets you
6
www.husqvarna-electrolux.se
disconnect the appliance from the
mains at all poles. The isolation
device must have a contact opening
width of minimum 3 mm.
2.3 Use
WARNING!
Risk of injury, burns and
electric shock.
• Remove all the packaging, labelling
and protective film (if applicable)
before first use.
• This appliance is for household use
only.
• Do not change the specification of
this appliance.
• Make sure that the ventilation
openings are not blocked.
• Do not let the appliance stay
unattended during operation.
• Set the cooking zone to “off” after
each use.
• Do not rely on the pan detector.
• Do not put cutlery or saucepan lids on
the cooking zones. They can become
hot.
• Do not operate the appliance with
wet hands or when it has contact with
water.
• Do not use the appliance as a work
surface or as a storage surface.
• If the surface of the appliance is
cracked, disconnect immediately the
appliance from the power supply. This
to prevent an electrical shock.
• Users with a pacemaker must keep a
distance of minimum 30 cm from the
induction cooking zones when the
appliance is in operation.
• When you place food into hot oil, it
may splash.
WARNING!
Risk of fire and explosion
• Fats and oil when heated can release
flammable vapours. Keep flames or
heated objects away from fats and oils
when you cook with them.
• The vapours that very hot oil releases
can cause spontaneous combustion.
• Used oil, that can contain food
remnants, can cause fire at a lower
temperature than oil used for the first
time.
• Do not put flammable products or
items that are wet with flammable
products in, near or on the appliance.
WARNING!
Risk of damage to the
appliance.
• Do not keep hot cookware on the
control panel.
• Do not put a hot pan cover on the
glass surface of the hob.
• Do not let cookware boil dry.
• Be careful not to let objects or
cookware fall on the appliance. The
surface can be damaged.
• Do not activate the cooking zones
with empty cookware or without
cookware.
• Do not put aluminium foil on the
appliance.
• Cookware made of cast iron,
aluminium or with a damaged bottom
can cause scratches on the glass /
glass ceramic. Always lift these
objects up when you have to move
them on the cooking surface.
• This appliance is for cooking
purposes only. It must not be used for
other purposes, for example room
heating.
2.4 Care and cleaning
• Clean the appliance regularly to
prevent the deterioration of the
surface material.
• Deactivate the appliance and let it
cool down before you clean it.
• Disconnect the appliance from the
electrical supply before maintenance.
• Do not use water spray and steam to
clean the appliance.
• Clean the appliance with a moist soft
cloth. Only use neutral detergents. Do
not use any abrasive products,
abrasive cleaning pads, solvents or
metal objects.
2.5 Service
• To repair the appliance contact the
Authorised Service Centre.
• Use original spare parts only.
ENGLISH
2.6 Disposal
WARNING!
Risk of injury or suffocation.
• Contact your municipal authority for
information on how to discard the
appliance correctly.
7
• Disconnect the appliance from the
mains supply.
• Cut off the mains electrical cable
close to the appliance and dispose of
it.
3. INSTALLATION
WARNING!
Refer to Safety chapters.
3.4 Assembly
3.1 Before the installation
Before you install the hob, write down
the information below from the rating
plate. The rating plate is on the bottom
of the hob.
min.
500mm
min.
50mm
Serial number ...........................
3.2 Built-in hobs
Only use the built-in hobs after you
assemble the hob into correct built-in
units and work surfaces that align to the
standards.
3.3 Connection cable
• The hob is supplied with a connection
cable.
• To replace the damaged mains cable,
use the cable type: H05V2V2-F which
withstands a temperature of 90 °C or
higher. Speak to your local Service
Centre.
min. min.
12 60
If the appliance is installed
above a drawer, the hob
ventilation can warm up the
items stored in the drawer
during the cooking process.
min.
28
8
www.husqvarna-electrolux.se
4. PRODUCT DESCRIPTION
4.1 Cooking surface layout
1
1
2
1
1 Induction cooking zone
2 Control panel
1
4.2 Control panel layout
6
8
7
5
4
3
2
1
9
10
To see the control panel and the zone positions activate the appliance with
Use the sensor fields to operate the appliance. The displays, indicators and sounds tell
which functions operate.
Sensor Function
field
1
2
3
/
4
5
6
-
Comment
ON / OFF
To activate and deactivate the hob.
Hob²Hood
To activate and deactivate the manual mode
of the function.
Pause
To activate and deactivate the function.
-
To increase or decrease the time.
-
To set the timer function.
Timer display
To show the time in minutes.
ENGLISH
Sensor Function
field
Comment
Bridge
To activate and deactivate the function.
Control bar
To set a heat setting.
9
PowerBoost
To activate the function.
10
Lock / Child Safety Device To lock / unlock the control panel.
7
/
8
-
4.3 OptiHeat Control (3 step
Residual heat indicator)
WARNING!
/ / There is a risk of
burns from residual heat.
The indicators show the level
of the residual heat for the
cooking zones you are
currently using. The
indicators may also come on
for the neighbouring
cooking zones even if you
are not using them.
9
The induction cooking zones produce
the heat necessary for the cooking
process directly in the bottom of the
cookware. The glass ceramic is heated by
the heat of the cookware.
When the hob is deactivated, the
indicators are still visible. When the hob
is cold enough, they disappear.
5. DAILY USE
WARNING!
Refer to Safety chapters.
5.1 Activating and
deactivating
Touch
for 1 second to activate or
deactivate the hob.
The control bars come on after you
activate the hob and go off after you
deactivate the hob.
When the hob is deactivated you can
only see
.
5.2 Automatic Switch Off
• you spill something or put something
on the control panel for more than 10
seconds (a pan, a cloth). When you
hear the acoustic signal, the hob
deactivates. Remove the object or
clean the control panel.
• the hob gets too hot (e.g. when a
saucepan boils dry). Let the cooking
zone cool down before you use the
hob again.
• you do not deactivate a cooking zone
or change the heat setting. After
some time, the hob deactivates.
The relation between the heat setting
and the time after which the hob
deactivates:
The function deactivates the hob
automatically if:
Heat setting
The hob deactivates after
• you do not place any cookware on the
hob for 50 seconds,
• you do not set the heat setting for 50
seconds after you place the cookware,
1-2
6 hours
3-4
5 hours
10
www.husqvarna-electrolux.se
Heat setting
The hob deactivates after
5
4 hours
6-9
1.5 hours
5.3 Using the cooking zones
CAUTION!
Do not place hot cookware
on the control panel. There
is a risk of damage to the
electronic parts.
Once you place a pot on the cooking
zone and set the heat setting, it remains
the same for 50 seconds after you
remove the pot. The control bar blinks
for the second half of that time. If you
place the pot on the cooking zone again
within this time, the heat setting
reactivates. Otherwise the cooking zone
deactivates.
5.5 Power management
function
Place the cookware in the centre of the
selected zone. Induction cooking zones
adapt to the dimension of the bottom of
the cookware automatically.
Once the pot is detected, the heat
setting 0 comes on.
You can cook with large cookware
placed on two cooking zones at the
same time. The cookware must cover the
centres of both zones. If the cookware is
located between the two centres, Bridge
function will not be activated.
5.4 The heat setting
Touch the control bar at the desired heat
setting or move your finger along the
control bar to set or change the heat
setting for a cooking zone.
• Cooking zones are grouped
according to the location and number
of the phases in the hob. See the
illustration.
• Each phase has a maximum electricity
loading of 3680 W.
• The function divides the power
between cooking zones connected to
the same phase.
• The function activates when the total
electricity loading of the cooking
zones connected to a single phase
exceeds 3680 W.
• The function decreases the power of
the other cooking zones connected to
the same phase.
• For cooking zones that have a
reduced power, the control panel
shows the maximum possible heat
settings.
• If a higher heat setting is not available
reduce it for the other cooking zones
first.
• The activation of the function
depends on the number and size of
pots.
ENGLISH
11
5.8 Timer
Count Down Timer
Use this function to specify how long a
cooking zone should operate during a
single cooking session.
Set the heat setting for the appropriate
cooking zone and then set the function.
to activate the function or
1. Touch
change the time.
and the indicators
The timer digits
5.6 Bridge
and
come on the display.
If the timer is not set,
and
disappear after 3 seconds.
The function operates when
the pot covers the centres of
the two zones.
or
to set the time (00 2. Touch
99 minutes).
After 3 seconds, the timer starts to count
This function connects two cooking
zones and they operate as one.
First set the heat setting for one of the
cooking zones.
To activate the function for left / right
down automatically. The indicators
cooking zones: touch / . To set or
change the heat setting touch one of the
left / right control sensors.
sounds and
flashes. To stop the
signal, touch
.
To deactivate the function: touch
indicators
/
. The cooking zones operate
independently.
5.7 PowerBoost
This function activates more power for
the appropriate induction cooking zone,
depending on the cookware size. The
function can be activated only for a
limited period of time.
Touch
to activate the function for the
cooking zone.
The function deactivates automatically.
For maximum duration
values, refer to "Technical
data".
,
disappear.
and
When the time comes to an end, a signal
To deactivate the function: touch
and
. The
come on. Use
or
to set
on the display.
Alternatively, set the heat level to 0. As a
result, a signal sounds and the timer is
cancelled.
Minute Minder
You can use this function when the hob is
activated but the cooking zones do not
operate.
Place a pot on a cooking zone to see
symbol.
1. Touch
to activate the function.
2. Touch
or
to set the time.
The function starts automatically after 4
seconds.
When you set the function, you can
remove the pot.
When the time comes to an end, a signal
sounds and
flashes. Touch
stop the signal.
to
12
www.husqvarna-electrolux.se
To deactivate the function: touch
indicators
and
to set
. The
light up. Use
or
on the display.
The function has no effect
on the operation of the
cooking zones.
the function is still active.
To deactivate the function
permanently: Activate the hob and do
5.9 Pause
This function sets all cooking zones that
operate to the lowest heat setting.
When the function is active,
symbols can be used.
,
or
To deactivate the function, touch
previous heat setting comes on.
. The
Lock
You can lock the control panel while the
hob operates. It prevents an accidental
change of the heat setting.
Deactivate the hob first.
1. Touch
for 3 seconds to activate
the function.
The display comes on and goes out.
2. Touch
or
to activate the function.
To deactivate the function, touch
for 3 seconds.
comes on.
of the timer to choose one
3. Touch
of the following:
Set the heat setting first.
Touch
not set the heat setting. Touch
until
signal sounds and the indicator comes
off. The control bars appear. Deactivate
the hob.
5.12 OffSound Control
(Deactivating and activating
the sounds)
Touch
to activate the function.
The heat setting is lowered to 1.
5.10
comes on. Touch
until signal
sounds and the indicator comes off. The
control bar appears. Set the heat setting
within 50 seconds.You can operate the
hob. When you deactivate the hob with
•
.
When you deactivate the
hob, you also deactivate this
function.
When the function is set to
hear the sounds only when:
5.11 Child Safety Device
This function prevents an accidental
operation of the hob.
Activate the hob first and do not set the
heat setting.
Touch
until signal sounds and the
indicator comes on to activate the
function.
The control bars disappear. Deactivate
the hob.
•
•
•
•
.
you can
you touch
Minute Minder comes down
Count Down Timer comes down
you put something on the control
panel.
5.13
When you deactivate the
hob, the function is still
active.
To deactivate the function for only one
cooking time: Activate the hob with
- the sounds are off
•
- the sounds are on
4. Wait until the hob deactivates
automatically to confirm your
selection.
Hob²Hood
It is an advanced automatic function
which connects the hob to a special
hood. Both the hob and the hood have
an infrared signal communicator. Speed
of the fan is defined automatically on the
basis of the mode setting and
temperature of the hottest cookware on
the hob. You can also operate the fan
from the hob manually.
ENGLISH
For most of the hoods, the
remote system is originally
deactivated. Activate it
before you use the function.
For more information refer
to the hood user manual.
Operating the function automatically
To operate the function automatically set
the automatic mode to H1 - H6. The hob
is originally set to H5. The hood reacts
whenever you operate the hob. The hob
recognizes the temperature of the
cookware automatically and adjusts the
speed of the fan.
Activating the light
You can set the hob to activate the light
automatically whenever you activate the
hob. To do so set the automatic mode to
H1 - H6.
The light on the hood
deactivates 2 minutes after
deactivating the hob.
13
Automatic modes
Auto- Boiling1) Frying2)
matic
light
Mode H0
Off
Off
Off
Mode H1
On
Off
Off
Mode H23)
On
Fan
speed 1
Fan
speed 1
Mode H3
On
Off
Fan
speed 1
Mode H4
On
Fan
speed 1
Fan
speed 1
Mode H5
On
Fan
speed 1
Fan
speed 2
Mode H6
On
Fan
speed 2
Fan
speed 3
1) The hob detects the boiling process and activates the fan speed in accordance with the automatic mode.
2) The hob detects the frying process and activates the fan speed in accordance with the automatic mode.
3) This mode activates the fan and the light and
does not rely on the temperature.
Changing the automatic mode
1. Deactivate the appliance.
for 3 seconds.
2. Touch
The display comes on and goes off.
3. Touch
for 3 seconds.
4. Touch
on.
a few times until
comes
of the Timer to select an
5. Touch
automatic mode.
When you finish cooking and deactivate
the hob, the hood fan may still operate
for a certain period of time. After that
time the system deactivates the fan
automatically and prevents you from an
accidental activation of the fan for the
next 30 seconds.
To operate the hood directly
on the hood panel
deactivate the automatic
mode of the function.
14
www.husqvarna-electrolux.se
Operating the fan speed
manually
You can also operate the fan from the
hob manually.
Touch
when the hob is active.
This deactivates automatic operation of
the function and allows you to change
the fan speed manually.
When you press , you raise the fan
speed by one. When you reach an
intensive level and press
again, you
set the fan speed to 0 which deactivates
the hood fan. To start the fan again with
the fan speed 1 touch .
To activate an automatic
operation of the function,
deactivate the hob and
activate it again.
6. HINTS AND TIPS
WARNING!
Refer to Safety chapters.
6.1 Cookware
For induction cooking zones
a strong electro-magnetic
field creates the heat in the
cookware very quickly.
Use the induction cooking
zones with suitable
cookware.
Cookware material
• correct: cast iron, steel, enamelled
steel, stainless steel, multi-layer
bottom (with a correct marking from a
manufacturer).
• not correct: aluminium, copper,
brass, glass, ceramic, porcelain.
Cookware is suitable for an induction
hob if:
• water boils very quickly on a zone set
to the highest heat setting.
• a magnet pulls on to the bottom of
the cookware.
The bottom of the cookware
must be as thick and flat as
possible.
Ensure pan bases are clean
and dry before placing on
the hob surface.
Cookware dimensions
Induction cooking zones adapt to the
dimension of the bottom of the
cookware automatically.
The cooking zone efficiency is related to
the diameter of the cookware. The
cookware with a diameter smaller than
the minimum receives only a part of the
power generated by the cooking zone.
Refer to "Technical data".
6.2 The noises during
operation
If you can hear:
• crack noise: cookware is made of
different materials (a sandwich
construction).
• whistle sound: you use a cooking
zone with a high power level and the
cookware is made of different
materials (a sandwich construction).
• humming: you use a high power level.
• clicking: electric switching occurs.
• hissing, buzzing: the fan operates.
The noises are normal and do not
indicate any malfunction.
6.3 Öko Timer (Eco Timer)
To save energy, the heater of the
cooking zone deactivates before the
count down timer sounds. The difference
in the operation time depends on the
heat setting level and the length of the
cooking operation.
6.4 Examples of cooking
applications
The correlation between the heat setting
of a zone and its consumption of power
ENGLISH
is not linear. When you increase the heat
setting, it is not proportional to the
increase of the consumption of power. It
means that a cooking zone with the
medium heat setting uses less than a half
of its power.
15
The data in the table is for
guidance only.
Heat setting
Use to:
Time
(min)
Hints
1
Keep cooked food warm.
as necessary
Put a lid on the cookware.
1-2
Hollandaise sauce, melt: butter, chocolate, gelatine.
5 - 25
Mix from time to time.
1-2
Solidify: fluffy omelettes,
baked eggs.
10 - 40
Cook with a lid on.
2-3
Simmer rice and milkbased
dishes, heat up ready-cooked
meals.
25 - 50
Add at least twice as much liquid as rice, mix milk dishes
halfway through the procedure.
3-4
Steam vegetables, fish, meat.
20 - 45
Add a couple of tablespoons
of liquid.
4-5
Steam potatoes.
20 - 60
Use max. ¼ l of water for 750 g
of potatoes.
4-5
Cook larger quantities of food, 60 - 150
stews and soups.
Up to 3 l of liquid plus ingredients.
6-7
Gentle fry: escalope, veal cordon bleu, cutlets, rissoles,
sausages, liver, roux, eggs,
pancakes, doughnuts.
as necessary
Turn halfway through.
7-8
Heavy fry, hash browns, loin
steaks, steaks.
5 - 15
Turn halfway through.
9
Boil water, cook pasta, sear meat (goulash, pot roast), deep-fry chips.
Boil large quantities of water. PowerBoost is activated.
6.5 Hints and Tips for
Hob²Hood
When you operate the hob with the
function:
• Protect the hood panel from direct
sunlight.
• Do not spot halogen light on the
hood panel.
• Do not cover the hob control panel.
• Do not interrupt the signal between
the hob and the hood (e.g. with the
hand, a cookware handle or a tall
pot). See the picture.
The hood in the picture is only
exemplary.
16
www.husqvarna-electrolux.se
Other remotely controlled
appliances may block the
signal. Do not use any such
appliances near to the hob
while Hob²Hood is on.
Cooker hoods with the Hob²Hood
function
To find the full range of cooker hoods
which work with this function refer to our
consumer website.
7. CARE AND CLEANING
WARNING!
Refer to Safety chapters.
7.1 General information
• Clean the hob after each use.
• Always use cookware with a clean
base.
• Scratches or dark stains on the surface
have no effect on how the hob
operates.
• Use a special cleaner suitable for the
surface of the hob.
• Use a special scraper for the glass.
7.2 Cleaning the hob
otherwise, the dirt can cause damage
to the hob. Take care to avoid burns.
Use a special hob scraper on the glass
surface at an acute angle and move
the blade on the surface.
• Remove when the hob is sufficiently
cool: limescale rings, water rings, fat
stains, shiny metallic discoloration.
Clean the hob with a moist cloth and
a non-abrasive detergent. After
cleaning, wipe the hob dry with a soft
cloth.
• Remove shiny metallic
discoloration: use a solution of water
with vinegar and clean the glass
surface with a cloth.
• Remove immediately: melted plastic,
plastic foil, sugar and food with sugar,
8. TROUBLESHOOTING
WARNING!
Refer to Safety chapters.
8.1 What to do if...
Problem
Possible cause
You cannot activate or oper- The hob is not connected to
ate the hob.
an electrical supply or it is
connected incorrectly.
Remedy
Check if the hob is correctly
connected to the electrical
supply. Refer to the connection diagram.
ENGLISH
Problem
You cannot select the maximum heat setting for one of
the cooking zones.
17
Possible cause
Remedy
The fuse is blown.
Make sure that the fuse is
the cause of the malfunction.
If the fuse is blown again
and again, contact a qualified electrician.
You do not set the heat setting for 50 seconds.
Activate the hob again and
set the heat setting in less
than 50 seconds.
You touched 2 or more sensor fields at the same time.
Touch only one sensor field.
Pause operates.
Refer to "Daily use".
There is water or fat stains
on the control panel.
Clean the control panel.
The other zones consume
the maximum available power.
Your hob works properly.
Reduce the heat setting of
the other cooking zones
connected to the same
phase.
Refer to "Power management".
An acoustic signal sounds
You put something on one
and the hob deactivates.
or more sensor fields.
An acoustic signal sounds
when the hob is deactivated.
Remove the object from the
sensor fields.
The hob deactivates.
Remove the object from the
sensor field.
You put something on the
sensor field
.
Residual heat indicator does
not come on.
The zone is not hot because
it operated only for a short
time or the sensor is damaged.
If the zone operated sufficiently long to be hot, speak
to an Authorised Service
Centre.
Hob²Hood does not work.
You covered the control
panel.
Remove the object from the
control panel.
You use a very tall pot which
blocks the signal.
Use a smaller pot, change
the cooking zone or operate
the hood manually.
The sensor fields become
hot.
The cookware is too large or Put large cookware on the
you put it too near to the
rear zones, if possible.
controls.
There is no sound when you
touch the panel sensor
fields.
The sounds are deactivated.
Activate the sounds. Refer to
"Daily use".
18
www.husqvarna-electrolux.se
Problem
comes on.
The control bar blinks.
and a number come on.
Possible cause
Remedy
Child Safety Device or Lock
operates.
Refer to "Daily use".
There is no cookware on the
zone or the zone is not fully
covered.
Put cookware on the zone so
that it fully covers the cooking zone.
The cookware is unsuitable.
Use suitable cookware. Refer
to "Hints and tips".
The diameter of the bottom
of the cookware is too small
for the zone.
Use cookware with correct
dimensions. Refer to "Technical data".
There is an error in the hob.
Deactivate the hob and activate it again after 30 seconds. If comes on again,
disconnect the hob from the
electrical supply. After 30
seconds, connect the hob
again. If the problem continues, speak to an Authorised
Service Centre.
You can hear a constant
beep noise.
The electrical connection is
incorrect.
8.2 If you cannot find a
solution...
If you cannot find a solution to the
problem yourself, contact your dealer or
an Authorised Service Centre. Give the
data from the rating plate. Make sure,
you operated the hob correctly. If not the
Disconnect the hob from the
electrical supply. Ask a qualified electrician to check the
installation.
servicing by a service technician or
dealer will not be free of charge, also
during the warranty period. The
instructions about the Service Centre and
conditions of guarantee are in the
guarantee booklet.
9. TECHNICAL DATA
9.1 Rating plate
Model QHIO660P
Typ 62 B4A 22 AA
Induction 7.35 kW
Ser.Nr. .................
HUSQVARNA
PNC 949 597 590 00
220 - 240 V / 400 V 2N 50 - 60 Hz
Made in Germany
7.35 kW
ENGLISH
19
9.2 Cooking zones specification
Cooking zone
Nominal power PowerBoost
(maximum heat [W]
setting) [W]
PowerBoost
Cookware diammaximum dura- eter [mm]
tion [min]
Left front
2300
3200
10
125 - 180
Left rear
2300
3200
10
125 - 180
Right front
2300
3200
10
125 - 180
Right rear
2300
3200
10
125 - 180
Cookware dimensions for the bridge
mode
Bridge
position
Minimum
cookware
[mm]
Maximum
cookware
[mm]
Left
140 x 280
210 x 330
Right
140 x 280
210 x 330
The power of the cooking zones can be
different in some small range from the
data in the table. It changes with the
material and dimensions of the
cookware.
For optimal cooking results use
cookware no larger than the diameter in
the table.
10. ENERGY EFFICIENCY
10.1 Product information according to EU 66/2014 valid for EU
market only
Model identification
QHIO660P
Type of hob
Built-In Hob
Number of cooking zones
4
Heating technology
Induction
Diameter of circular cooking zones (Ø)
Left front
Left rear
Right front
Right rear
21.0 cm
21.0 cm
21.0 cm
21.0 cm
Energy consumption per
cooking zone (EC electric
cooking)
Left front
Left rear
Right front
Right rear
181.8 Wh / kg
181.8 Wh / kg
194.9 Wh / kg
181.8 Wh / kg
Energy consumption of the
hob (EC electric hob)
EN 60350-2 - Household electric cooking
appliances - Part 2: Hobs - Methods for
measuring performance
185.1 Wh / kg
10.2 Energy saving
You can save energy during everyday
cooking if you follow below hints.
20
www.husqvarna-electrolux.se
• When you heat up water, use only the
amount you need.
• If it is possible, always put the lids on
the cookware.
• Before you activate the cooking zone
put the cookware on it.
• Put the smaller cookware on the
smaller cooking zones.
• Put the cookware directly in the
centre of the cooking zone.
• Use the residual heat to keep the
food warm or to melt it.
11. ENVIRONMENTAL CONCERNS
Recycle materials with the symbol .
Put the packaging in relevant containers
to recycle it. Help protect the
environment and human health by
recycling waste of electrical and
electronic appliances. Do not dispose of
*
appliances marked with the symbol
with the household waste. Return the
product to your local recycling facility or
contact your municipal office.
ENGLISH
21
22
www.husqvarna-electrolux.se
ENGLISH
23
867350784-B-312019
www.husqvarna-electrolux.se/shop
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising