AEG | KFA29SIO | User manual | Aeg KFA29SIO User Manual

Aeg KFA29SIO User Manual
KFA29SIO
USER
MANUAL
EN
User Manual
Hob
2
www.aeg.com
CONTENTS
1. SAFETY INFORMATION............................................................................................. 2
2. SAFETY INSTRUCTIONS.............................................................................................4
3. INSTALLATION............................................................................................................7
4. PRODUCT DESCRIPTION...........................................................................................9
5. DAILY USE.................................................................................................................. 10
6. HINTS AND TIPS........................................................................................................13
7. CARE AND CLEANING.............................................................................................14
8. TROUBLESHOOTING............................................................................................... 15
9. TECHNICAL DATA.................................................................................................... 17
10. ENERGY EFFICIENCY............................................................................................. 18
11. GUARANTEE .......................................................................................................... 18
FOR PERFECT RESULTS
Thank you for choosing this AEG product. We have created it to give you
impeccable performance for many years, with innovative technologies that help
make life simpler - features you might not find on ordinary appliances. Please
spend a few minutes reading to get the very best from it.
Visit our website for:
Get usage advice, brochures, trouble shooter, service information:
www.aeg.com/webselfservice
Register your product for better service:
www.registeraeg.com
Buy Accessories, Consumables and Original spare parts for your appliance:
www.aeg.com/shop
CUSTOMER CARE AND SERVICE
Always use original spare parts.
When contacting our Authorised Service Centre, ensure that you have the
following data available: Model, PNC, Serial Number.
The information can be found on the rating plate.
Warning / Caution-Safety information
General information and tips
Environmental information
Subject to change without notice.
1.
SAFETY INFORMATION
Before the installation and use of the appliance,
carefully read the supplied instructions. The
manufacturer is not responsible for any injuries or
damage that are the result of incorrect installation or
ENGLISH
3
usage. Always keep the instructions in a safe and
accessible location for future reference.
1.1 Children and vulnerable people safety
•
•
•
•
•
•
•
•
This appliance can be used by children aged from 8
years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience
and knowledge if they have been given supervision or
instruction concerning the use of the appliance in a
safe way and understand the hazards involved.
Children between 3 and 8 years of age and persons
with very extensive and complex disabilities shall be
kept away from the appliance unless continuously
supervised.
Children of less than 3 years of age should be kept
away from the appliance unless continuously
supervised.
Do not let children play with the appliance.
Keep all packaging away from children and dispose of
it appropriately.
Keep children and pets away from the appliance when
it operates or when it cools down. Accessible parts
may become hot during use.
If the appliance has a child safety device, it should be
activated.
Children shall not carry out cleaning and user
maintenance of the appliance without supervision.
1.2 General Safety
•
•
•
WARNING: The appliance and its accessible parts
become hot during use. Care should be taken to
avoid touching heating elements.
WARNING: Unattended cooking on a hob with fat or
oil can be dangerous and may result in fire.
NEVER try to extinguish a fire with water, but switch
off the appliance and then cover flame e.g. with a lid
or a fire blanket.
4
www.aeg.com
•
•
•
•
•
•
•
•
•
•
CAUTION: The appliance must not be supplied
through an external switching device, such as a timer,
or connected to a circuit that is regularly switched on
and off by a utility.
CAUTION: The cooking process has to be supervised.
A short term cooking process has to be supervised
continuously.
WARNING: Danger of fire: Do not store items on the
cooking surfaces.
Metallic objects such as knives, forks, spoons and lids
should not be placed on the hob surface since they
can get hot.
Do not use the appliance before installing it in the
built-in structure.
Do not use a steam cleaner to clean the appliance.
After use, switch off the hob element by its control
and do not rely on the pan detector.
If the glass ceramic surface / glass surface is cracked,
switch off the appliance and unplug it from the mains.
In case the appliance is connected to the mains
directly using junction box, remove the fuse to
disconnect the appliance from power supply. In either
case contact the Authorised Service Centre.
If the supply cord is damaged, it must be replaced by
the manufacturer, an authorized Service or similarly
qualified persons in order to avoid a hazard.
WARNING: Use only hob guards designed by the
manufacturer of the cooking appliance or indicated by
the manufacturer of the appliance in the instructions
for use as suitable or hob guards incorporated in the
appliance. The use of inappropriate guards can cause
accidents.
2. SAFETY INSTRUCTIONS
2.1 Installation
WARNING!
Only a qualified person must
install this appliance.
WARNING!
Risk of injury or damage to
the appliance.
• Remove all the packaging.
ENGLISH
• Do not install or use a damaged
appliance.
• Follow the installation instructions
supplied with the appliance.
• Keep the minimum distance from
other appliances and units.
• Always take care when moving the
appliance as it is heavy. Always use
safety gloves and enclosed footwear.
• Seal the cut surfaces with a sealant to
prevent moisture to cause swelling.
• Protect the bottom of the appliance
from steam and moisture.
• Do not install the appliance adjacent
to a door or under a window. This
prevents hot cookware falling from
the appliance when the door or the
window is opened.
• Each appliance has cooling fans on
the bottom.
• If the appliance is installed above a
drawer:
– Do not store any small pieces or
sheets of paper that could be
pulled in, as they can damage the
cooling fans or impair the cooling
system.
– Keep a distance of minimum 2 cm
between the bottom of the
appliance and parts stored in the
drawer.
• Remove any separator panels
installed in the cabinet below the
appliance.
2.2 Electrical Connection
WARNING!
Risk of fire and electric
shock.
• All electrical connections should be
made by a qualified electrician.
• The appliance must be earthed.
• Before carrying out any operation
make sure that the appliance is
disconnected from the power supply.
• Make sure that the parameters on the
rating plate are compatible with the
electrical ratings of the mains power
supply.
• Make sure the appliance is installed
correctly. Loose and incorrect
electricity mains cable or plug (if
applicable) can make the terminal
become too hot.
5
• Use the correct electricity mains
cable.
• Do not let the electricity mains cable
tangle.
• Make sure that a shock protection is
installed.
• Use the strain relief clamp on the
cable.
• Make sure the mains cable or plug (if
applicable) does not touch the hot
appliance or hot cookware, when you
connect the appliance to the near
sockets.
• Do not use multi-plug adapters and
extension cables.
• Make sure not to cause damage to
the mains plug (if applicable) or to the
mains cable. Contact our Authorised
Service Centre or an electrician to
change a damaged mains cable.
• The shock protection of live and
insulated parts must be fastened in
such a way that it cannot be removed
without tools.
• Connect the mains plug to the mains
socket only at the end of the
installation. Make sure that there is
access to the mains plug after the
installation.
• If the mains socket is loose, do not
connect the mains plug.
• Do not pull the mains cable to
disconnect the appliance. Always pull
the mains plug.
• Use only correct isolation devices: line
protecting cut-outs, fuses (screw type
fuses removed from the holder), earth
leakage trips and contactors.
• The electrical installation must have
an isolation device which lets you
disconnect the appliance from the
mains at all poles. The isolation
device must have a contact opening
width of minimum 3 mm.
2.3 Use
WARNING!
Risk of injury, burns and
electric shock.
• Remove all the packaging, labelling
and protective film (if applicable)
before first use.
• This appliance is for household use
only.
6
www.aeg.com
• Do not change the specification of
this appliance.
• Make sure that the ventilation
openings are not blocked.
• Do not let the appliance stay
unattended during operation.
• Set the cooking zone to “off” after
each use.
• Do not rely on the pan detector.
• Do not put cutlery or saucepan lids on
the cooking zones. They can become
hot.
• Do not operate the appliance with
wet hands or when it has contact with
water.
• Do not use the appliance as a work
surface or as a storage surface.
• If the surface of the appliance is
cracked, disconnect immediately the
appliance from the power supply. This
to prevent an electrical shock.
• Users with a pacemaker must keep a
distance of minimum 30 cm from the
induction cooking zones when the
appliance is in operation.
• When you place food into hot oil, it
may splash.
WARNING!
Risk of fire and explosion
• Fats and oil when heated can release
flammable vapours. Keep flames or
heated objects away from fats and oils
when you cook with them.
• The vapours that very hot oil releases
can cause spontaneous combustion.
• Used oil, that can contain food
remnants, can cause fire at a lower
temperature than oil used for the first
time.
• Do not put flammable products or
items that are wet with flammable
products in, near or on the appliance.
WARNING!
Risk of damage to the
appliance.
• Do not keep hot cookware on the
control panel.
• Do not put a hot pan cover on the
glass surface of the hob.
• Do not let cookware boil dry.
• Be careful not to let objects or
cookware fall on the appliance. The
surface can be damaged.
• Do not activate the cooking zones
with empty cookware or without
cookware.
• Do not put aluminium foil on the
appliance.
• Cookware made of cast iron,
aluminium or with a damaged bottom
can cause scratches on the glass /
glass ceramic. Always lift these
objects up when you have to move
them on the cooking surface.
• This appliance is for cooking
purposes only. It must not be used for
other purposes, for example room
heating.
2.4 Care and cleaning
• Clean the appliance regularly to
prevent the deterioration of the
surface material.
• Deactivate the appliance and let it
cool down before you clean it.
• Disconnect the appliance from the
electrical supply before maintenance.
• Do not use water spray and steam to
clean the appliance.
• Clean the appliance with a moist soft
cloth. Use only neutral detergents. Do
not use abrasive products, abrasive
cleaning pads, solvents or metal
objects.
2.5 Service
• To repair the appliance contact the
Authorised Service Centre.
• Use original spare parts only.
2.6 Disposal
WARNING!
Risk of injury or suffocation.
• Contact your municipal authority for
information on how to discard the
appliance correctly.
• Disconnect the appliance from the
mains supply.
• Cut off the mains electrical cable
close to the appliance and dispose of
it.
ENGLISH
7
3. INSTALLATION
WARNING!
Refer to Safety chapters.
3.1 Before the installation
Before you install the hob, write down
the information below from the rating
plate. The rating plate is on the bottom
of the hob.
Model .......................................
PNC .........................................
Serial number ...........................
3.2 Built-in hobs
Only use the built-in hobs after you
assemble the hob into correct built-in
units and work surfaces that align to the
standards.
During installation in combustible
matter, NIN SEV 1000 and fire protection
guidelines and regulations of the
Association of Cantonal Fire Insurance
shall be strictly adhered to.
3.3 Connection cable
• The hob is supplied with a connection
cable.
• To replace the damaged mains cable,
use the cable type: H05V2V2-F which
withstands a temperature of 90 °C or
higher. Speak to your local Service
Centre.
3.4 Electrical connection
Install the hob with a socket supply line.
If there is no socket supply line, the fixed
home electrical system must include an
isolating device with at least a 3 mmcontact separation to enable a
simultaneous and all-pole cut off from
the mains (according to NIN SEV 1000).
3.5 Attaching the seal Integrated installation
1. Clean the rabbets in the worktop.
2. Cut the supplied 3x10mm seal stripe
into 4 stripes. The stripes must have
the same length as the rabbets.
3. Cut the ends of the stripes at an
angle of 45°. They should fit in the
corners of the rabbets accurately.
4. Attach the stripes to the rabbets. Do
not stretch the stripes. Do not bond
the ends of the stripes one over the
other.
After you assemble the hob, seal the
remaining gap between the glass
ceramic and the worktop with silicone.
Make sure the silicone does not get
under the glass ceramic.
3.6 Attaching the seal - On-top
installation
1. Clean the worktop around the cut
out area.
2. Attach the supplied 2x6mm seal
stripe to the lower edge of the hob,
along the outer edge of the glass
ceramic. Do not stretch it. Make sure
that the ends of the seal stripe are
located in the middle of one side of
the hob.
3. Add some millimetres to the length
when you cut the seal stripe.
4. Join the two ends of the seal stripe
together.
3.7 Assembly
min.
500mm
min.
50mm
8
www.aeg.com
If the appliance is installed
above a drawer, the hob
ventilation can warm up the
items stored in the drawer
during the cooking process.
2.
min.
28 mm
ON-TOP INSTALLATION
1.
290
60 30
510
57
490
270
min. 55
min. 1100
min.
12
min.
38
INTEGRATED INSTALLATION
1.
290
60 30
3.8 Installation of more than
one hob
min. 650 mm
40-50 mm
490+02 mm
55 mm
30 mm
510
270+02 mm
62
490
If several 30 cm hobs are to be installed
side by side into the same cut out, an
assembly kit including a support side
bracket and supplementary seals is
available at our Authorised Service
Centres. The relevant installation
instructions are supplied within the kit
package.
270
min. 55
min. 1100
min.
12
min.
38
ENGLISH
9
4. PRODUCT DESCRIPTION
4.1 Cooking surface layout
1 Induction cooking zone
2 Control panel
180 mm
1
180 mm
1
2
4.2 Control panel layout
1
2
3
4
10
9
5
8
6
7
Use the sensor fields to operate the appliance. The displays, indicators and sounds tell
which functions operate.
Sensor Function
field
Comment
1
ON / OFF
To activate and deactivate the hob.
2
Lock / Child Safety Device
To lock / unlock the control panel.
3
Pause
To activate and deactivate the function.
-
Heat setting display
To show the heat setting.
-
Timer indicators of cooking To show for which zone you set the time.
zones
-
Timer display
To show the time in minutes.
-
To select the cooking zone.
4
5
6
7
10
www.aeg.com
Sensor Function
field
8
9
Comment
/
-
To increase or decrease the time.
/
-
To set a heat setting.
PowerBoost
To activate the function.
10
4.3 Heat setting displays
Display
Description
The cooking zone is deactivated.
The cooking zone operates.
-
Pause operates.
PowerBoost operates.
+ digit
There is a malfunction.
A cooking zone is still hot (residual heat).
Lock / Child Safety Device operates.
Incorrect or too small cookware or no cookware on the cooking zone.
Automatic Switch Off operates.
4.4 Residual heat indicator
WARNING!
There is a risk of burns
from residual heat.
The indicators show the level of the
residual heat for the cooking zones you
are currently using. The indicators may
also come on for the neighbouring
cooking zones even if you are not using
them.
The induction cooking zones produce
the heat necessary for the cooking
process directly in the bottom of the
cookware. The glass ceramic is heated by
the heat of the cookware.
5. DAILY USE
WARNING!
Refer to Safety chapters.
5.1 Activating and
deactivating
Touch
for 1 second to activate or
deactivate the hob.
ENGLISH
5.2 Automatic Switch Off
The function deactivates the hob
automatically if:
• all cooking zones are deactivated,
• you do not set the heat setting after
you activate the hob,
• you spill something or put something
on the control panel for more than 10
seconds (a pan, a cloth, etc.). An
acoustic signal sounds and the hob
deactivates. Remove the object or
clean the control panel.
• the hob gets too hot (e.g. when a
saucepan boils dry). Let the cooking
zone cool down before you use the
hob again.
• you use incorrect cookware. The
symbol
comes on and the cooking
zone deactivates automatically after 2
minutes.
• you do not deactivate a cooking zone
or change the heat setting. After
comes on and the hob
some time
deactivates.
The relation between the heat setting
and the time after which the hob
deactivates:
Heat setting
The hob deactivates after
11
induction cooking zone automatically
sets back to the highest heat setting.
Refer to “Technical data”
chapter.
To activate the function for a cooking
zone: touch
.
comes on.
To deactivate the function: touch
or
.
5.5 Timer
Count Down Timer
You can use this function to set how long
the cooking zone should operate for a
single cooking session.
First set the heat setting for the cooking
zone then set the function.
To set the cooking zone: touch
again and again until the indicator of a
necessary cooking zone comes on.
To activate the function or change the
or
of the timer to set
time: touch
the time (00 - 99 minutes). When the
indicator of the cooking zone starts to
flash slowly the time counts down.
To see the remaining time: set the
6 hours
cooking zone with . The indicator of
the cooking zone starts to flash quickly.
The display shows the remaining time.
3-4
5 hours
To deactivate the function: set the
5
4 hours
6-9
1.5 hour
and touch . The
cooking zone with
remaining time counts back to 00. The
indicator of the cooking zone goes out.
,1-2
When the time comes to an
end, the sound operates and
00 flashes. The cooking zone
deactivates.
5.3 The heat setting
Touch
to increase the heat setting.
Touch
to decrease the heat setting.
and
at the same time to
Touch
deactivate the cooking zone.
5.4 PowerBoost
This function makes more power
available to the induction cooking zones.
The function can be activated for the
induction cooking zone only for a limited
period of time. After this time the
To stop the sound: touch
.
Minute Minder
You can use this function as a Minute
Minder when the hob is activated and
the cooking zones do not operate. The
heat setting display shows
.
To activate the function: touch
Touch
or
.
of the timer to set the
12
www.aeg.com
time. When the time comes to an end,
the sound operates and 00 flashes.
Touch
To stop the sound: touch
To deactivate the function: activate the
.
for 4 seconds.
Deactivate the hob with
To deactivate the function: touch
hob with
and then touch . The remaining time
counts back to 00
Touch
The function has no effect
on the operation of the
cooking zones.
When the function operates, all other
symbols on the control panels are
locked.
The function does not stop the timer
functions.
to activate the function.
comes on. The heat setting is lowered
to 1.
. The
5.7 Lock
You can lock the control panel while
cooking zones operate. It prevents an
accidental change of the heat setting.
Set the heat setting first.
To activate the function: touch .
comes on for 4 seconds. The Timer stays
on.
To deactivate the function: touch .
The previous heat setting comes on.
When you deactivate the
hob, you also deactivate this
function.
5.8 Child Safety Device
This function prevents an accidental
operation of the hob.
To activate the function: activate the
hob with
Deactivate the hob with
comes on.
.
cooking time: activate the hob with
This function sets all cooking zones that
operate to the lowest heat setting.
To deactivate the function, touch
previous heat setting comes on.
. Do not set the heat setting.
for 4 seconds.
To override the function for only one
5.6 Pause
Touch
comes on.
.
. Do not set the heat setting.
.
comes on. Touch
for 4 seconds.
Set the heat setting in 10 seconds. You
can operate the hob. When you
deactivate the hob with
operates again.
the function
5.9 OffSound Control
(Deactivation and activation of
the sounds)
for 3
Deactivate the hob. Touch
seconds. The display comes on and goes
out. Touch
for 3 seconds.
or
comes on. Touch
of the front left
zone to choose one of the following:
•
- the sounds are off
•
- the sounds are on
To confirm your selection wait until the
hob deactivates automatically.
When the function is set to
hear the sounds only when:
•
•
•
•
you can
you touch
Minute Minder comes down
Count Down Timer comes down
you put something on the control
panel.
5.10 Power management
• All cooking zones are connected to
one phase. See the illustration.
• The function activates when the total
electricity loading of the cooking
zones exceeds maximum electricity
loading of the phase.
• The function divides the power
between cooking zones.
• The function decreases the power to
the other cooking zones.
• The heat setting display of the
reduced zones alternates between
ENGLISH
13
the chosen heat setting and the
reduced heat setting. After some time
the heat setting display of the
reduced zones stays on the reduced
heat setting.
6. HINTS AND TIPS
WARNING!
Refer to Safety chapters.
6.1 Cookware
For induction cooking zones
a strong electro-magnetic
field creates the heat in the
cookware very quickly.
Use the induction cooking
zones with suitable
cookware.
Cookware material
• correct: cast iron, steel, enamelled
steel, stainless steel, multi-layer
bottom (with a correct marking from a
manufacturer).
• not correct: aluminium, copper,
brass, glass, ceramic, porcelain.
Cookware is suitable for an induction
hob if:
• water boils very quickly on a zone set
to the highest heat setting.
• a magnet pulls on to the bottom of
the cookware.
The bottom of the cookware
must be as thick and flat as
possible.
Ensure pan bases are clean
and dry before placing on
the hob surface.
Cookware dimensions
Induction cooking zones adapt to the
dimension of the bottom of the
cookware automatically.
The cooking zone efficiency is related to
the diameter of the cookware. The
cookware with a diameter smaller than
the minimum receives only a part of the
power generated by the cooking zone.
Refer to "Technical data".
6.2 The noises during
operation
If you can hear:
• crack noise: cookware is made of
different materials (a sandwich
construction).
• whistle sound: you use a cooking
zone with a high power level and the
cookware is made of different
materials (a sandwich construction).
• humming: you use a high power level.
• clicking: electric switching occurs.
• hissing, buzzing: the fan operates.
The noises are normal and do not
indicate any malfunction.
6.3 Examples of cooking
applications
The correlation between the heat setting
of a zone and its consumption of power
is not linear. When you increase the heat
setting, it is not proportional to the
increase of the consumption of power. It
means that a cooking zone with the
14
www.aeg.com
medium heat setting uses less than a half
of its power.
Heat setting
The data in the table is for
guidance only.
Use to:
Time
(min)
Hints
Keep cooked food warm.
as necessary
Put a lid on the cookware.
1-2
Hollandaise sauce, melt: butter, chocolate, gelatine.
5 - 25
Mix from time to time.
1-2
Solidify: fluffy omelettes,
baked eggs.
10 - 40
Cook with a lid on.
2-3
Simmer rice and milkbased
dishes, heat up ready-cooked
meals.
25 - 50
Add at least twice as much liquid as rice, mix milk dishes
halfway through the procedure.
3-4
Steam vegetables, fish, meat.
20 - 45
Add a couple of tablespoons
of liquid.
4-5
Steam potatoes.
20 - 60
Use max. ¼ l of water for 750 g
of potatoes.
4-5
Cook larger quantities of food, 60 - 150
stews and soups.
Up to 3 l of liquid plus ingredients.
6-7
Gentle fry: escalope, veal cordon bleu, cutlets, rissoles,
sausages, liver, roux, eggs,
pancakes, doughnuts.
as necessary
Turn halfway through.
7-8
Heavy fry, hash browns, loin
steaks, steaks.
5 - 15
Turn halfway through.
9
Boil water, cook pasta, sear meat (goulash, pot roast), deep-fry chips.
-1
Boil large quantities of water. PowerBoost is activated.
7. CARE AND CLEANING
WARNING!
Refer to Safety chapters.
• Use a special cleaner suitable for the
surface of the hob.
• Use a special scraper for the glass.
7.1 General information
7.2 Cleaning the hob
• Clean the hob after each use.
• Always use cookware with a clean
base.
• Scratches or dark stains on the surface
have no effect on how the hob
operates.
• Remove immediately: melted plastic,
plastic foil, sugar and food with sugar,
otherwise, the dirt can cause damage
to the hob. Take care to avoid burns.
Use a special hob scraper on the glass
ENGLISH
surface at an acute angle and move
the blade on the surface.
• Remove when the hob is sufficiently
cool: limescale rings, water rings, fat
stains, shiny metallic discoloration.
Clean the hob with a moist cloth and
a non-abrasive detergent. After
15
cleaning, wipe the hob dry with a soft
cloth.
• Remove shiny metallic
discoloration: use a solution of water
with vinegar and clean the glass
surface with a cloth.
8. TROUBLESHOOTING
WARNING!
Refer to Safety chapters.
8.1 What to do if...
Problem
Possible cause
You cannot activate or oper- The hob is not connected to
ate the hob.
an electrical supply or it is
connected incorrectly.
Remedy
Check if the hob is correctly
connected to the electrical
supply. Refer to the connection diagram.
The fuse is blown.
Make sure that the fuse is
the cause of the malfunction.
If the fuse is blown again
and again, contact a qualified electrician.
You do not set the heat setting for 10 seconds.
Activate the hob again and
set the heat setting in less
than 10 seconds.
You touched 2 or more sensor fields at the same time.
Touch only one sensor field.
Pause operates.
Refer to "Daily use".
There is water or fat stains
on the control panel.
Clean the control panel.
An acoustic signal sounds
You put something on one
and the hob deactivates.
or more sensor fields.
An acoustic signal sounds
when the hob is deactivated.
Remove the object from the
sensor fields.
The hob deactivates.
Remove the object from the
sensor field.
You put something on the
sensor field
Residual heat indicator does
not come on.
.
The zone is not hot because
it operated only for a short
time or the sensor is damaged.
If the zone operated sufficiently long to be hot, speak
to an Authorised Service
Centre.
16
www.aeg.com
Problem
Possible cause
Remedy
The heat setting changes
between two levels.
Power management operates.
Refer to "Daily use".
The sensor fields become
hot.
The cookware is too large or Put large cookware on the
you put it too near to the
rear zones, if possible.
controls.
There is no sound when you
touch the panel sensor
fields.
The sounds are deactivated.
Activate the sounds. Refer to
"Daily use".
comes on.
Child Safety Device or Lock
operates.
Refer to "Daily use".
comes on.
There is no cookware on the
zone.
Put cookware on the zone.
The cookware is unsuitable.
Use suitable cookware. Refer
to "Hints and tips".
The diameter of the bottom
of the cookware is too small
for the zone.
Use cookware with correct
dimensions. Refer to "Technical data".
There is an error in the hob.
Deactivate the hob and activate it again after 30 sec-
and a number come on.
onds. If
comes on again,
disconnect the hob from the
electrical supply. After 30
seconds, connect the hob
again. If the problem continues, speak to an Authorised
Service Centre.
You can hear a constant
beep noise.
The electrical connection is
incorrect.
8.2 If you cannot find a
solution...
If you cannot find a solution to the
problem yourself, contact your dealer or
an Authorised Service Centre. Give the
data from the rating plate. Give also
three digit letter code for the glass
ceramic (it is in the corner of the glass
surface) and an error message that
comes on. Make sure, you operated the
Disconnect the hob from the
electrical supply. Ask a qualified electrician to check the
installation.
hob correctly. If not the servicing by a
service technician or dealer will not be
free of charge, also during the warranty
period. The instructions about the
Service Centre and conditions of
guarantee are in the guarantee booklet.
ENGLISH
17
8.3 Labels supplied with the
accessories bag
Stick the adhesive labels as indicated
below:
A
B
MOD.
MOD.
PROD.NO.
PROD.NO.
SER.NO
SER.NO
DATA
DATA
C
MOD.
PROD.NO.
SER.NO.
0049
TYPE
IP20
03 IT
MADE IN ITALY
A. Stick it on Guarantee Card and send
this part (if applicable).
B. Stick it on Guarantee Card and keep
this part (if applicable).
C. Stick it on instruction booklet.
9. TECHNICAL DATA
9.1 Cooking zones specification
Cooking zone
Nominal power PowerBoost
(maximum heat [W]
setting) [W]
PowerBoost
Cookware diammaximum dura- eter [mm]
tion [min]
Middle front
1800
2500
10
145 - 180
Middle rear
1800
2500
10
145 - 180
The power of the cooking zones can be
different in some small range from the
data in the table. It changes with the
material and dimensions of the
cookware.
For optimal cooking results use
cookware no larger than the diameter in
the table.
18
www.aeg.com
10. ENERGY EFFICIENCY
10.1 Product information according to EU 66/2014 valid for EU
market only
Model identification
KFA29SIO
Type of hob
Built-In Hob
Number of cooking zones
2
Heating technology
Induction
Diameter of circular cooking zones (Ø)
Middle front
Middle rear
18.0 cm
18.0 cm
Energy consumption per
cooking zone (EC electric
cooking)
Middle front
Middle rear
184.4 Wh / kg
184.4 Wh / kg
Energy consumption of the
hob (EC electric hob)
184.4 Wh / kg
EN 60350-2 - Household electric cooking
appliances - Part 2: Hobs - Methods for
measuring performance
10.2 Energy saving
You can save energy during everyday
cooking if you follow below hints.
• When you heat up water, use only the
amount you need.
11.
CH
• If it is possible, always put the lids on
the cookware.
• Before you activate the cooking zone
put the cookware on it.
• Put the smaller cookware on the
smaller cooking zones.
• Put the cookware directly in the
centre of the cooking zone.
• Use the residual heat to keep the
food warm or to melt it.
GUARANTEE
Customer Service Centres
Point of Service
Industriestrasse 10
5506 Mägenwil
Morgenstrasse 131
3018 Bern
Langgasse 10
9008 St. Gallen
Seetalstrasse 11
6020 Emmenbrücke
Schlossstrasse 1
4133 Pratteln
Comercialstrasse 19
7000 Chur
Le Trési 6
1028 Préverenges
Via Violino 11
6928 Manno
ENGLISH
Spare parts service Industriestrasse 10,
5506 Mägenwil, Tel. 0848 848 111
Specialist advice/Sale Badenerstrasse
587, 8048 Zürich, Tel. 044 405 81 11
Warranty For each product we provide a
two-year guarantee from the date of
purchase or delivery to the consumer
(with a guarantee certificate, invoice or
sales receipt serving as proof). The
guarantee covers the costs of materials,
labour and travel. The guarantee will
lapse if the operating instructions and
conditions of use are not adhered to, if
the product is incorrectly installed, or in
the event of damage caused by external
influences, force majeure, intervention by
third parties or the use of non-genuine
components.
12. ENVIRONMENTAL CONCERNS
Recycle materials with the symbol .
Put the packaging in relevant containers
to recycle it. Help protect the
environment and human health by
recycling waste of electrical and
electronic appliances. Do not dispose of
appliances marked with the symbol
with the household waste. Return the
product to your local recycling facility or
contact your municipal office.
*
19
For Switzerland:
Where should you take your
old equipment?
Anywhere that sells new
equipment or hand it in to
official SENS collection
points or official SENS
recycling firms.
The list of official SENS
collection points can be
found at www.erecycling.ch
867357596-A-362019
www.aeg.com/shop
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising