Electrolux | KGV9539IK | User manual | Electrolux KGV9539IK User Manual

Electrolux KGV9539IK User Manual
KGV9539IK
EN
Hob
User Manual
2
www.electrolux.com
CONTENTS
1. SAFETY INFORMATION....................................................................................2
2. SAFETY INSTRUCTIONS..................................................................................5
3. INSTALLATION.................................................................................................. 7
4. PRODUCT DESCRIPTION.............................................................................. 12
5. DAILY USE....................................................................................................... 14
6. HINTS AND TIPS............................................................................................. 17
7. CARE AND CLEANING....................................................................................19
8. TROUBLESHOOTING......................................................................................21
9. TECHNICAL DATA...........................................................................................24
WE’RE THINKING OF YOU
Thank you for purchasing an Electrolux appliance. You’ve chosen a product that
brings with it decades of professional experience and innovation. Ingenious and
stylish, it has been designed with you in mind. So whenever you use it, you can
be safe in the knowledge that you’ll get great results every time.
Welcome to Electrolux.
Visit our website for:
Get usage advice, brochures, trouble shooter, service information:
www.electrolux.com/webselfservice
Register your product for better service:
www.registerelectrolux.com
Buy Accessories, Consumables and Original spare parts for your appliance:
www.electrolux.com/shop
CUSTOMER CARE AND SERVICE
Always use original spare parts.
When contacting our Authorised Service Centre, ensure that you have the
following data available: Model, PNC, Serial Number.
The information can be found on the rating plate.
Warning / Caution-Safety information
General information and tips
Environmental information
Subject to change without notice.
1.
SAFETY INFORMATION
Before the installation and use of the appliance, carefully
read the supplied instructions. The manufacturer is not
responsible for any injuries or damages that are the
result of incorrect installation or usage. Always keep the
ENGLISH
3
instructions in a safe and accessible location for future
reference.
1.1 Children and vulnerable people safety
•
•
•
•
•
•
•
•
This appliance can be used by children aged from 8
years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience
and knowledge if they have been given supervision or
instruction concerning the use of the appliance in a
safe way and understand the hazards involved.
Children between 3 and 8 years of age and persons
with very extensive and complex disabilities shall be
kept away unless continuously supervised.
Children of less than 3 years of age should be kept
away unless continuously supervised.
Do not let children play with the appliance.
Keep all packaging away from children and dispose of
it appropriately.
Keep children and pets away from the appliance when
it operates or when it cools down. Accessible parts are
hot.
If the appliance has a child safety device, it should be
activated.
Children shall not carry out cleaning and user
maintenance of the appliance without supervision.
1.2 General Safety
•
•
•
•
WARNING: The appliance and its accessible parts
become hot during use. Care should be taken to avoid
touching heating elements.
Do not operate the appliance by means of an external
timer or separate remote-control system.
WARNING: Unattended cooking on a hob with fat or
oil can be dangerous and may result in fire.
NEVER try to extinguish a fire with water, but switch
off the appliance and then cover flame e.g. with a lid
or a fire blanket.
4
www.electrolux.com
•
•
•
•
•
•
•
•
•
•
CAUTION: The cooking process has to be supervised.
A short term cooking process has to be supervised
continuously.
WARNING: Danger of fire: Do not store items on the
cooking surfaces.
Metallic objects such as knives, forks, spoons and lids
should not be placed on the hob surface since they
can get hot.
Do not use a steam cleaner to clean the appliance.
If the glass ceramic surface / glass surface is cracked,
switch off the appliance and unplug it from the mains.
In case the appliance is connected to the mains
directly using junction box, remove the fuse to
disconnect the appliance from power supply. In either
case contact the Authorised Service Centre.
In case of hotplate glass breakage:
– shut immediately off all burners and any electrical
heating element and isolate the appliance from the
power supply,
– do not touch the appliance surface,
– do not use the appliance.
If the supply cord is damaged, it must be replaced by
the manufacturer, an authorized Service or similarly
qualified persons in order to avoid a hazard.
Where the appliance is directly connected to the
power supply, an all-pole isolating switch with a
contact gap is required. Complete disconnection in
compliance with the conditions specified in
overvoltage category III must be guaranteed. The
earth cable is excluded from this.
When you route the mains cable, make sure that the
cable doesn't come into direct contact (for example
using insulating sleeving) with parts that can reach
temperatures of more than 50°C above room
temperature.
WARNING: Use only hob guards designed by the
manufacturer of the cooking appliance or indicated by
ENGLISH
5
the manufacturer of the appliance in the instructions
for use as suitable or hob guards incorporated in the
appliance. The use of inappropriate guards can cause
accidents.
2. SAFETY INSTRUCTIONS
This appliance is suitable for the
following markets: BH JO LB QA AE
2.2 Electrical Connection
WARNING!
Risk of fire and electric
shock.
2.1 Installation
WARNING!
Only a qualified person must
install this appliance.
WARNING!
Risk of injury or damage to
the appliance.
•
•
•
•
•
•
•
•
•
•
Remove all the packaging.
Do not install or use a damaged
appliance.
Follow the installation instructions
supplied with the appliance.
Keep the minimum distance from
other appliances and units.
Always take care when moving the
appliance as it is heavy. Always use
safety gloves and enclosed footwear.
Seal the cut surfaces with a sealant to
prevent moisture to cause swelling.
Protect the bottom of the appliance
from steam and moisture.
Do not install the appliance adjacent
to a door or under a window. This
prevents hot cookware falling from the
appliance when the door or the
window is opened.
If the appliance is installed above
drawers make sure that the space,
between the bottom of the appliance
and the upper drawer, is sufficient for
air circulation.
The bottom of the appliance can get
hot. Make sure to install a noncombustible separation panel under
the appliance to prevent access to the
bottom.
•
•
•
•
•
•
•
•
•
•
•
•
•
All electrical connections should be
made by a qualified electrician.
The appliance must be earthed.
Before carrying out any operation
make sure that the appliance is
disconnected from the power supply.
Make sure that the parameters on the
rating plate are compatible with the
electrical ratings of the mains power
supply.
Make sure the appliance is installed
correctly. Loose and incorrect
electricity mains cable or plug (if
applicable) can make the terminal
become too hot.
Use the correct electricity mains
cable.
Do not let the electricity mains cable
tangle.
Make sure that a shock protection is
installed.
Use the strain relief clamp on the
cable.
Make sure the mains cable or plug (if
applicable) does not touch the hot
appliance or hot cookware, when you
connect the appliance to the near
sockets.
Do not use multi-plug adapters and
extension cables.
Make sure not to cause damage to
the mains plug (if applicable) or to the
mains cable. Contact our Authorised
Service Centre or an electrician to
change a damaged mains cable.
The shock protection of live and
insulated parts must be fastened in
such a way that it cannot be removed
without tools.
6
www.electrolux.com
•
•
•
•
•
Connect the mains plug to the mains
socket only at the end of the
installation. Make sure that there is
access to the mains plug after the
installation.
If the mains socket is loose, do not
connect the mains plug.
Do not pull the mains cable to
disconnect the appliance. Always pull
the mains plug.
Use only correct isolation devices: line
protecting cut-outs, fuses (screw type
fuses removed from the holder), earth
leakage trips and contactors.
The electrical installation must have
an isolation device which lets you
disconnect the appliance from the
mains at all poles. The isolation
device must have a contact opening
width of minimum 3 mm.
•
•
•
•
•
•
•
WARNING!
Risk of fire and explosion
•
2.3 Gas connection
•
•
•
•
•
All gas connections should be made
by a qualified person.
Before installation, make sure that the
local distribution conditions (nature of
the gas and gas pressure) and the
adjustment of the appliance are
compatible.
Make sure that there is air circulation
around the appliance.
The information about the gas supply
is on the rating plate.
This appliance is not connected to a
device, which evacuates the products
of combustion. Make sure to connect
the appliance according to current
installation regulations. Pay attention
to requirements regarding adequate
ventilation.
2.4 Use
WARNING!
Risk of injury, burns and
electric shock.
•
•
•
Remove all the packaging, labelling
and protective film (if applicable)
before first use.
This appliance is for household use
only.
Do not change the specification of this
appliance.
Make sure that the ventilation
openings are not blocked.
Do not let the appliance stay
unattended during operation.
Set the cooking zone to “off” after
each use.
Do not put cutlery or saucepan lids on
the cooking zones. They can become
hot.
Do not operate the appliance with wet
hands or when it has contact with
water.
Do not use the appliance as a work
surface or as a storage surface.
When you place food into hot oil, it
may splash.
•
•
•
Fats and oil when heated can release
flammable vapours. Keep flames or
heated objects away from fats and
oils when you cook with them.
The vapours that very hot oil releases
can cause spontaneous combustion.
Used oil, that can contain food
remnants, can cause fire at a lower
temperature than oil used for the first
time.
Do not put flammable products or
items that are wet with flammable
products in, near or on the appliance.
WARNING!
Risk of damage to the
appliance.
•
•
•
•
•
•
Do not keep hot cookware on the
control panel.
Do not let cookware to boil dry.
Be careful not to let objects or
cookware fall on the appliance. The
surface can be damaged.
Do not activate the cooking zones
with empty cookware or without
cookware.
Do not put aluminium foil on the
appliance.
Cookware made of cast iron,
aluminium or with a damaged bottom
can cause scratches on the glass /
glass ceramic. Always lift these
objects up when you have to move
them on the cooking surface.
ENGLISH
•
•
•
•
•
•
•
•
•
•
Use only stable cookware with the
correct shape and diameter larger
than the dimensions of the burners.
Make sure cookware is centrally
positioned on the burners.
Do not use large cookware that
overlap the edges of the appliance.
This can cause damage to the
worktop surface.
Use only the accessories supplied
with the appliance.
Do not install a flame diffuser on the
burner.
The use of a gas cooking appliance
results in the production of heat and
moisture. Provide good ventilation in
the room where the appliance is
installed.
Prolonged intensive use of the
appliance may call for additional
ventilation, for example opening of a
window, or more effective ventilation,
for example increasing the level of
mechanical ventilation where present.
This appliance is for cooking
purposes only. It must not be used for
other purposes, for example room
heating.
Do not let acid liquids, for example
vinegar, lemon juice or limescale
remover, touch the hob. This can
cause matt patches.
Discoloration of the enamel or
stainless steel has no effect on the
performance of the appliance.
•
•
•
•
•
2.6 Disposal
WARNING!
Risk of injury or suffocation.
•
•
•
•
Contact your municipal authority for
information on how to discard the
appliance correctly.
Disconnect the appliance from the
mains supply.
Cut off the mains electrical cable
close to the appliance and dispose of
it.
Flat the external gas pipes.
2.7 Service
•
•
To repair the appliance contact an
Authorised Service Centre.
Use original spare parts only.
2.5 Care and cleaning
•
Clean the appliance regularly to
prevent the deterioration of the
surface material.
3. INSTALLATION
WARNING!
Refer to Safety chapters.
3.1 Before the installation
Before you install the hob, write down the
information bellow from the rating plate.
The rating plate is on the bottom of the
hob.
Model .......................................
7
Deactivate the appliance and let it
cool down before you clean it.
Disconnect the appliance from the
electrical supply before maintenance.
Do not use water spray and steam to
clean the appliance.
Clean the appliance with a moist soft
cloth. Only use neutral detergents. Do
not use any abrasive products,
abrasive cleaning pads, solvents or
metal objects.
Do not clean the burners in the
dishwasher.
PNC .........................................
Serial number ...........................
8
www.electrolux.com
3.2 Gas Connection
•
WARNING!
The following instructions
about installation,
connection and maintenance
must be carried out by
qualified personnel in
compliance with standards
and local regulations in
force.
Choose fixed connections or use a
flexible pipe in stainless steel in
compliance with the regulation in force. If
you use flexible metallic pipes, be careful
they do not come in touch with mobile
parts or they are not squeezed. Also be
careful when the hob is put together with
an oven.
Make sure that the gas
supply pressure of the
appliance obeys the
recommended values. The
adjustable connection is
fixed to the comprehensive
ramp by means of a
threaded nut R 1/2". Screw
the parts without force,
adjust the connection in the
necessary direction and
tighten everything.
A
A. End of shaft with nut
Liquid gas
Use the rubber pipe holder for liquid gas.
Always engage the gasket. Then
continue with the gas connection.
The flexible pipe is prepared for apply
when:
•
•
•
•
it can not get hot more than room
temperature, higher than 30°C;
it is no longer than 1500 mm;
it shows no throttles;
it is not subject to traction or torsion;
it does not get in touch with cutting
edges or corners;
• it can be easily examined in order to
make sure its condition.
The control of preservation of the flexible
pipe consists in checking that:
•
it does not show cracks, cuts, marks
of burnings on the two ends and on its
full length;
• the material is not hardened, but
shows its correct elasticity;
• the fastening clamps are not rusted;
• expired term is not due.
If one or more defects are visible, do not
repair the pipe, but replace it.
WARNING!
When installation is
complete, make sure that
the seal of each pipe fitting
is correct. Use a soapy
solution, not a flame!
3.3 Injectors replacement
1. Remove the pan supports.
2. Remove the caps and crowns of the
burner.
3. With a socket spanner 7 remove the
injectors and replace them with the
ones which are necessary for the
type of gas you use (see table in
"Technical Data" chapter).
4. Assemble the parts, follow the same
procedure backwards.
5. Replace the rating plate (it is near the
gas supply pipe) with the one for the
new type of gas supply. You can find
this plate in the package supplied
with the appliance.
If the supply gas pressure is changeable
or different from the necessary pressure,
you must fit an applicable pressure
adjuster on the gas supply pipe.
3.4 Gas selection
1. Touch
for 3 seconds.
2. Within 7 seconds, touch
seconds.
3. Touch
3 times.
The display shows G1 mode.
4. Touch .
To enter the mode.
for 3
ENGLISH
5. Timer display shows selected gas
type.
6. Touch
to set the gas type
according to table below.
7. Touch
9
To confirm the gas type.
Touch
to exit the mode or wait for
Automatic Switch Off function activates.
.
Gas selection
0
1
2
Liquid gas G30/G31 G20 20 mbar
30/30 mbar
Safety risk, do not use 2 gas
selection. Use only 0 or 1 gas
selections depends on gas
supply.
3.5 Adjustment of minimum
level
WARNING!
Information for authorised
installer only.
Switch off the hob before the
adjustment.
If the minimum level is
incorrect, repeat the steps 6
and 7.
9. Touch
to select the next burner
and repeat the steps 5-8.
Touch
WARNING!
Make sure the flame does
not go out when you move
quickly from the maximum to
the minimum heat setting
position.
To adjust the minimum level of the
burners:
1. Touch
for 3 seconds.
2. Within 7 seconds, touch
seconds.
for 3
WARNING!
Do not set the G3 and G4
modes. It is for authorised
installer only.
3. Touch
4 times.
The display shows G2 mode.
4. Touch .
To enter the mode.
5. Wait 5 seconds, after selecting the
mode.
The burner shows minimum level and the
control bar shows
.
to exit the mode.
3.6 Electrical connection
•
6. Touch
or .
To increase or decrease the value and
adjust the minimum level.
7. Wait 5 seconds.
To send the selected value to power
board.
8. Check it the minimum level is correct
•
and touch .
To confirm the minimum level.
•
•
•
Make sure that the rated voltage and
type of power on the rating plate
agree with the voltage and the power
of the local power supply.
This appliance is supplied with a
mains cable. It has to be supplied with
a correct plug which can hold the load
that the rating plate rates. Make sure
that you install the plug in a correct
socket.
Always use a correctly installed
shockproof socket.
Make sure that there is an access to
the mains plug after the installation.
Do not pull the mains cable to
disconnect the appliance. Always pull
the mains plug.
10
www.electrolux.com
•
•
There is a risk of fire when the
appliance is in connection with an
extension cable, an adapter or a
multiple connection. Make sure that
the ground connection agrees with the
standards and regulations.
Do not let the power cable to heat up
to a temperature higher than 90° C.
Make sure that the cable section is
applicable to the voltage and the working
temperature. The yellow / green earth
wire must be approximately 2 cm longer
than the brown (or black) phase wire.
3.7 Connection cable
To replace the connection cable use only
the special cable or its equivalent. The
cable type is: H05SS-F T180.
3.8 Assembly
min.
650mm
min.
100mm
min. 2 mm
A
min. 2 mm
B
< 20 mm
B
57 mm
41 mm
31 mm
B
> 20 mm
min. 500 mm
A
12 mm
28 mm
38 mm
A
min
30 mm
min. 500 mm
A
12 mm
28 mm
38 mm
B
57 mm
41 mm
31 mm
ENGLISH
890
min.
38 mm
min.
2 mm
min.
12 mm
min.
2 mm
CAUTION!
Install the appliance only on
a worktop with flat surface.
3.9 Installing hob under the
hood
If you install the hob under a
hood, please see the
installation instructions of the
hood for the minimum
distance between the
appliances.
11
12
www.electrolux.com
3.10 Possibilities for insertion
A
The panel installed below the hob must
be easy to remove and let an easy
access in case a technical assistance
intervention is necessary.
B
min 40 mm
min 5 mm
(max 150 mm)
Kitchen unit with door
60 mm
A. Removable panel
B. Space for connections
Kitchen unit with oven
The electrical connection of the hob and
the oven must be installed separately for
safety reasons and to let easy remove
oven from the unit.
min 6 mm
4. PRODUCT DESCRIPTION
4.1 Cooking surface layout
1
1
2
3
4
1
Semi-rapid burner
Multi Crown burner
Auxiliary burner
Control panel
2
1
3
4
4.2 Control panel layout
1
2
3
4
5
11
10
6
9
8
Use the sensor fields to operate the appliance. The displays, indicators and sounds
tell which functions operate.
7
ENGLISH
Sen‐
sor
field
Function
Comment
1
ON / OFF
To activate and deactivate the hob.
2
Lock / Child Safety De‐
vice
To lock / unlock the control panel.
3
Pause
To activate and deactivate the function.
4
-
Heat setting display
To show the heat setting.
5
-
Timer display
To show the time in minutes.
Led indicator
To show activated function.
Hob²Hood
To activate and deactivate the manual
mode of the function.
-
To activate and deactivate the Timer.
-
To increase or decrease the time.
6
7
8
/
9
10
11
-
Area for Hob²Hood infra‐ To hood communication.
red signal
-
Control bar
To set the heat setting for the burner.
4.3 Heat setting displays
Display
Description
Burner is deactivated.
-
Burner operates.
There is a fault.
A cooking zone is still hot (residual heat).
Lock / Child Safety Device operates.
Pause operates.
Automatic Switch Off function operates.
13
14
www.electrolux.com
4.4 Hot Surface Indicator
WARNING!
If the cooking zone becomes
hot during cooking, the
setting indicator shows a Hot
Surface warning
when
the zone is turned off. The
Hot Surface Indicator shows
until the cooking zone cools.
5. DAILY USE
D. Flame safety device
WARNING!
Refer to Safety chapters.
5.2 Ignition of the burner
5.1 Burner overview
Always light the burner
before you put on the
cookware.
$
%
&
'
$
%
&
'
A. Burner cap
B. Burner crown
C. Ignition candle
WARNING!
Be very careful when you
use open fire in the kitchen
environment. The
manufacturer declines any
responsibility in case of the
flame misuse.
1. Touch
for 1 second to activate the
hob.
After 20 seconds of non-use, the hob
deactivates.
2. After light animation, when you see
on display, touch the control bar
at the correct heat setting or move
your finger along the control bar until
you reach the correct heat setting.
To set or change the heat setting.
If after some tries the burner
does not light, check if the
crown and its cap are in
correct positions and clean
the metal part of the flame
safety device (Refer to "Care
and cleaning") .
ENGLISH
If the burner accidentally
goes out, the hob re-ignite
the burner 3 times. If the
flame still does not light,
appears.
If the
appears, deactivate
and activate the hob.
After light animation, when
reappears, touch
and
within 3 seconds.
then
When you see
reset.
the fault is
Level
Time (hours)
4
1,5
5
1,5
5.5 Lock or unlock the cooktop
You can lock the control panel while
burners operate. It prevents an
accidental change of the heat setting.
To lock the control panel:
1. Set the heat setting.
2. Touch the
.
appears on the display of the
burner.
5.3 Turning the burner off
3.
To put the flame out, touch the control
To unlock the control panel, touch
again.
bar to the off position
.
WARNING!
Always turn the flame down
or switch it off before you
remove the pans from the
burner.
5.4 Automatic Switch Off
The function deactivates the hob
automatically if:
•
•
•
•
all burners are deactivated,
you do not set the heat setting after
you activate the hob,
you spill something or put something
on the control panel for more than 10
seconds (a pan, a cloth, etc.). An
acoustic signal sounds and the hob
deactivates. Remove the object or
clean the control panel.
you do not deactivate a burner or
change the heat setting. After some
comes on and the hob
time
deactivates.
The relation between the heat setting
and the time after which the hob
deactivates:
15
You can turn the burners off
while the control panel is
locked. Use
the hob.
to deactivate
To set the lock for child safety:
1. Touch
to turn the cooktop on.
2. Touch
for 3 seconds, to activate
the lock.
bars.
3. Touch
comes on in all control
to turn the cooktop off.
You can unlock the cooktop
while the child safety
operates.
To temporarily unlock:
1. Touch
to turn the cooktop on.
2. Touch
for 3 seconds.
appears on the display of the
burner.
4. Set the heat setting.
5. After end of the cooking process and
after turning off the cooktop, the Lock
function is active.
To completely unlock:
3.
Level
Time (hours)
1
6
1. Touch
2
3
3
3
2. Touch
for 3 seconds. The lock
deactivates.
to turn the cooktop on.
16
www.electrolux.com
3. Touch
to turn the cooktop off.
comes on. Touch
of the timer to
choose one of the following:
5.6 Pause
•
This function sets all burners that
operate to the lowest heat setting.
When the function operates, you can not
change the heat setting.
When the function does not stop the
timer functions.
comes on.
To deactivate the function, touch
previous heat setting comes on.
. The
You can use this function as a Minute
Minder when the hob is activated.
.
2. Touch
or
of the timer to set the
time in minutes (00-99). The timer
starts to flash quickly
indicator
during the time setting.
you can
you touch
Minute Minder comes down
Count Down Timer comes down
you put something on the control
panel.
5.9
5.7 Minute Minder
1. Touch
When the function is set to
hear the sounds only when:
•
•
•
•
to activate the function.
Touch
- the sounds are off
•
- the sounds are on
To confirm your selection wait until the
hob deactivates automatically.
Hob²Hood
It is an advanced automatic function
which connects the hob to a special
hood. Both the hob and the hood have
an infrared signal communicator. Speed
of the fan is defined automatically on the
basis of the mode setting and
temperature of the hottest cookware on
the hob. You can also operate the fan
from the hob manually.
The hood operates only
when the hob is activated.
3. When the timer indicator
starts to
flash slowly, the timer is activated.
When the time comes to an end, the
sound operates and 00 flashes.
For most of the hoods, the
remote system is originally
deactivated. Activate it
before you use the function.
For more information refer to
the hood user manual.
4. Touch .
To stop the sound.
The function has no effect
on the operation of the
burners.
The hob automatically sets
the speed of the fan
according to the cooking
process.
The maximum duration of
the timer functions is 00-99
minutes. Check the minute
minder instructions (missing
timer adjustment).
Automatic modes
5.8 OffSound Control
(Deactivating and activating the
sounds)
Mode
Mode de‐
scription
Auto‐
matic
light
Auto‐
matic
fan
speed
Deactivate the hob. Touch
for 3
seconds. The display comes on and
H0
Manual
Off
Off
H1
Auto light
On
Off
goes out. Touch
for 3 seconds.
or
ENGLISH
Mode
Mode de‐
scription
Auto‐
matic
light
Auto‐
matic
fan
speed
On
1
H2
Fixed
speed
H3
Auto speed On
Low
0-1
H4
Auto speed On
Mid
0-1
H5
Auto speed On
High
0-2
H6
Auto speed On
Intense
0-3
3. Touch
for 3 seconds.
4. Touch
on.
a few times until
17
comes
5. Touch
of the Timer to select an
automatic mode.
Touch
to set the speed
manually.
Touch longer
to turn off
the fan and the light.
WARNING!
After end of cooking, the
hood does not turn off
automatically. Turn it off
manually.
Changing the automatic mode
1. Deactivate the appliance.
2. Touch
for 3 seconds. the display
comes on and goes off.
6. HINTS AND TIPS
WARNING!
Refer to Safety chapters.
CAUTION!
Make sure that the pots are
placed centrally on the
burner in order to get the
maximum stability and a
lower gas consumption.
6.1 Cookware
CAUTION!
Do not use cast iron pans,
clay or earthenware pots,
grill or toaster plates.
WARNING!
Do not put the same pan on
two burners.
WARNING!
Do not put unstable or
damaged pots on the burner
to prevent spills and injuries.
CAUTION!
Make sure that pot handles
are not above the front edge
of the cooktop.
CAUTION!
Liquids spilt during cooking
can cause the glass to
break.
6.2 Energy saving
•
•
If it is possible, always put the lids on
the cookware.
When the liquid starts to boil, turn
down the flame to barely simmer the
liquid.
6.3 Diameters of cookware
Use cookware with
diameters applicable to the
size of burners.
18
www.electrolux.com
Burner
Diameter of
cookware
(mm)
Multi Crown
220 - 260
Semi-rapid (rear left)
120 - 240
Semi-rapid (rear right)
120 - 240
Semi-rapid (front left)
120 - 220
Auxiliary
80 - 180
6.4 Hints and Tips for
Hob²Hood
When you operate the hob with the
function:
•
Protect the hood panel from direct
sunlight.
• Do not spot halogen light on the hood
panel.
• Do not cover the hob control panel.
• Do not interrupt the signal between
the hob and the hood (for example
with a hand or a cookware handle).
See the picture.
The hood in the picture is only
exemplary.
Other remotely controlled
appliances may block the
signal. Do not use any
remotely controlled
appliances at the time when
you use the function on the
hob.
Cooker hoods with the Hob²Hood
function
To find the full range of cooker hoods
which work with this function refer to our
consumer website. The Electrolux cooker
hoods that work with this function must
have the symbol .
6.5 Examples of cooking
applications
The data in the table shows examples of
the heat setting and cooking times for
gentle and heavy frying, and delicate
cooking.
•
Adjust the settings depend on the
type of food, the type of the gas used,
the material and the size of the pans.
Refer to diameters of cookware in
Hints and Tips chapter.
• For delicate cooking use the auxiliary
burner or semi-rapid burner with flame
spreader.
• For an even heat distribution use
coated pan and cook on auxiliary or
semi-rapid burners.
• Each example in the table below
shows two or three steps.
• If you use a pan, heat up the oil first,
while frying keep the pan at a
constant temperature in accordance
with the values suggested in the table.
Cooking method symbols used in the
table:
Heat up the oil
Keep the window for
Hob²Hood infrared signal
communicator clean.
Gentle frying
Heat to boiling
ENGLISH
Simmering
P
or
ti Burn‐
Food
o
er
n
s
Blending, melting in‐
gredients
Step 1
Sym‐
bol
Step 2
L
ev
el
Time
(min)
Sym‐
bol
Step 3
L
ev
el
Time
(min)
Crep
es
4
SR
5
1-4
2
4-8
Bur‐
gers
2
AUX
5
1-5
3
4-8
Bur‐
gers
3
SR
5
1-5
3
4-8
Bur‐
gers
4
MC
5
1-5
3
4-7
Fries
4
MC
5
20-30
Be‐
cha‐ 4
mel1)
AUX
1
5-10
5
5-10
Rice
por‐
ridg
e1)
AUX
5
10-20
1
30-40
4
2)
2)
19
2)
2)
Sym‐
bol
2)
L
ev
el
Time
(min)
1
4-8
1) Stirring continuously
2) Without lid
7. CARE AND CLEANING
WARNING!
Refer to Safety chapters.
7.1 General information
•
•
Clean the hob after each use.
It is recommended to activate the
lock / child safety device function
(Refer to "Lock or unlock the cooktop"
in "Daily use" chapter).
•
•
•
Always use cookware with a clean
base.
Scratches or dark stains on the
surface have no effect on how the hob
operates.
Use a special cleaner suitable for the
surface of the hob.
20
www.electrolux.com
The presence of water or
other liquids on the control
panel can accidentally
activate or deactivate the
hob functions.
WARNING!
Do not use knives, scrapers
or similar instruments to
clean the surface of the
glass or the rims of the
burners and the frame (if
applicable).
•
Wash stainless steel parts with water,
and then dry them with a soft cloth.
7.2 Pan supports
The pan supports are not
resistant to washing in a
dishwasher. They must be
washed by hand.
1. Remove the pan supports to easily
clean the hob.
Be very careful when
you replace the pan
supports to prevent the
hob top from damage.
2. The enamel coating occasionally can
have rough edges, so be careful
when you wash the pan supports by
hand and dry them. If necessary,
remove stubborn stains with a paste
cleaner.
3. After you clean the pan supports,
make sure that they are in correct
positions.
4. For the burner to operate correctly,
make sure that the arms of the pan
supports are aligned with the centre
of the burner.
7.3 Removing pan supports
To keep the pan supports in the correct
position, they are put on metal pins
installed in the rear side of the hob. For
easier cleaning, pan supports can be
removed from the hob. Lift up the pan
supports keeping them in horizontal
position and with the right order as
shown in the graphic.
Do not lift the pan supports
at an angle, as this will put
strain on the metal pins. This
can cause damage to the
pins and cause them to
break.
ENGLISH
•
•
21
otherwise, the dirt can cause damage
to the hob. Take care to avoid burns.
Remove when the hob is
sufficiently cool: limescale rings,
water rings, fat stains, shiny metallic
discoloration. Clean the hob with a
moist cloth and a non-abrasive
detergent. After cleaning, wipe the
hob dry with a soft cloth.
To clean the enamelled parts, caps
and crowns, wash them with warm
soapy water and dry them carefully
before you put them back on.
7.5 Cleaning the ignition candle
and the flame safety device
The shape of pan supports and the
amount of burners can be different in
other models of the appliance.
7.4 Cleaning the hob
•
Remove immediately: melted plastic,
plastic foil, sugar and food with sugar,
Keep the metal part of the ignition candle
and the flame safety device cleaned with
a moist cloth or sponge to prevent
difficult lightning or difficult flame
recognition. Check if the burner crown is
not blocked with food residues.
7.6 Periodic maintenance
Speak to your local Authorised Service
Centre periodically to check the
conditions of the gas supply pipe and the
pressure adjuster, if fitted.
8. TROUBLESHOOTING
WARNING!
Refer to Safety chapters.
8.1 What to do if...
Problem
Possible cause
Remedy
You cannot activate or op‐
erate the hob.
The hob is not connected
to an electrical supply or it
is connected incorrectly.
Check if the hob is correct‐
ly connected to the electri‐
cal supply. Refer to the
connection diagram.
The fuse is blown.
Make sure that the fuse is
the cause of the malfunc‐
tion. If the fuse is blown
again and again, contact a
qualified electrician.
You do not set the heat
setting for 20 seconds.
Activate the hob again and
set the heat setting in less
than 20 seconds.
22
www.electrolux.com
Problem
Possible cause
Remedy
You touched 2 or more
sensor fields at the same
time.
Touch only one sensor
field.
There is water or fat stains
on the control panel.
Clean the control panel.
An acoustic signal sounds
and the hob deactivates.
An acoustic signal sounds
when the hob is deactiva‐
ted.
You put something on one
or more sensor fields.
Remove the object from
the sensor fields.
The hob deactivates.
You put something on the
Remove the object from
the sensor field.
sensor field
.
Hob²Hood function does
not work.
You covered the control
panel.
The sensor fields become
hot.
The cookware is too large Put large cookware on the
or you put it too near to the rear burners if possible.
controls.
There is no sound when
The sounds are deactiva‐
you touch the panel sensor ted.
fields.
Remove the object from
the control panel.
Activate the sounds. Refer
to "Daily use".
comes on.
Automatic Switch Off oper‐ Deactivate the hob and ac‐
ates.
tivate it again.
comes on.
The Child Safety Device
function operates.
Refer to "Daily use".
comes on.
There is a fault.
To reset the fault, deacti‐
vate and activate the hob,
after light animation, when
reappears, touch
and then
within 3 sec‐
onds.
the fault
When you see
is reset.
Make sure that the crown
and the flame cap are cor‐
rectly positioned, and
clean the metal part of the
flame safety device.
You can hear a constant
beep noise.
The electrical connection is Disconnect the hob from
incorrect.
the electrical supply. Ask a
qualified electrician to
check the installation.
ENGLISH
Problem
Possible cause
Remedy
comes on.
The hob is too hot.
Wait a few minutes for cool
down the hob. If possible,
put the large cookware on
the rear burners.
comes on.
There is a fault.
Follow the same procedure
comes on.
Too many attempts to
clear.
as if
and the number come
There is an error in the
hob.
appeared.
Wait for 15 minutes and
follow the same procedure
as if
on.
23
appeared.
Disconnect the hob from
the electrical supply for
some time. Disconnect the
fuse from the electrical
system of the house. Con‐
nect it again. If
comes
on again, speak to an Au‐
thorised Service Centre.
comes on.
There is a dirt around
burner area.
8.2 If you cannot find a
solution...
If you cannot find a solution to the
problem yourself, contact your dealer or
an Authorised Service Centre. Give the
data from the rating plate. Make sure,
you operated the hob correctly. If not the
servicing by a service technician or
Refer to "Care and clean‐
ing".
dealer will not be free of charge, also
during the warranty period. The
instructions about the Service Centre
and conditions of guarantee are in the
guarantee booklet.
24
www.electrolux.com
8.3 Labels supplied with the
accessories bag
Stick the adhesive labels as indicated
below:
A
B
MOD.
MOD.
PROD.NO.
PROD.NO.
SER.NO
SER.NO
DATA
DATA
C
MOD.
PROD.NO.
SER.NO.
0049
TYPE
IP20
03 IT
MADE IN ITALY
A. Stick it on Guarantee Card and send
this part (if applicable).
B. Stick it on Guarantee Card and keep
this part (if applicable).
C. Stick it on instruction booklet.
9. TECHNICAL DATA
9.1 Hob dimensions
Width
890 mm
Depth
510 mm
9.2 Other technical data
TOTAL POW‐
ER:
Electric supply:
Gas original:
Gas replace‐
ment:
749 g/h
G20 (2H) 20 mbar
10,2 kW
220-240 V ~ 50-60 Hz
Appliance cate‐ II2H3B/P
gory:
Gas connec‐
tion:
G30/G31 (3B/P) 30/30
mbar
R 1/2"
ENGLISH
Appliance
class:
25
3
9.3 Gas burners for LPG G30/G31 30/30 mbar
BURNER
NORMAL
POWER kW
MINIMUM
POWER kW
INJECTOR
MARK
NOMINAL GAS
FLOW g/h
Multi Crown
3,6
1,8
095
262
Semi-rapid
1,9
0,75
71
138
Auxiliary
1,0
0,47
50
73
9.4 Gas burners for NATURAL GAS G20 20 mbar
BURNER
NORMAL POWER MINIMUM POWER
kW
kW
INJECTOR MARK
Multi Crown
3,5
1,75
146
Semi-rapid
1,9
0,7
96x
Auxiliary
1,0
0,38
76X
10. ENVIRONMENTAL CONCERNS
Recycle materials with the symbol .
Put the packaging in relevant containers
to recycle it. Help protect the
environment and human health by
recycling waste of electrical and
electronic appliances. Do not dispose of
*
appliances marked with the symbol
with the household waste. Return the
product to your local recycling facility or
contact your municipal office.
26
www.electrolux.com
ENGLISH
27
867356424-B-282019
www.electrolux.com/shop
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising