Bosch | BGS4HYGGB | Instruction manual | Bosch BGS4SIL73A Vacuum cleaner User manual

Bosch BGS4SIL73A Vacuum cleaner User manual
Bedienung-en_GS40_8001 001 871_StiWa 04.03.2014 13:11 Seite 1
Register your new Bosch now:
www.bosch-home.com/welcome
BGS 4..
Runn´n
d
en
Operating instructions
Bedienung-en_GS40_8001 001 871_StiWa 04.03.2014 13:11 Seite 2
Table of content
Safety information
Intended use . . . . .
Safety information
Proper use . . . . . .
..
..
..
..
..
..
..
..
.
.
.
.
..
..
..
..
..
..
..
..
..
..
..
..
.
.
.
.
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
..
.
.
.
.
..
..
..
..
..
..
..
..
..
..
..
..
.
.
.
.
..
..
..
..
..
..
..
..
. .4
. .4
. .5
. .5
Your vacuum cleaner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Replacement parts and special accessories . . . . . . . . . . . . .10
Initial use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Connecting the flexible hose . . . . . . . . . . . . . . . . . . . .
Putting the handle and the telescopic tube together . .
Inserting the telescopic tube into the floor nozzle . . . .
Adjusting the telescopic tube . . . . . . . . . . . . . . . . . . . .
Connecting the appliance . . . . . . . . . . . . . . . . . . . . . . .
Switch on /off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Controlling the suction level . . . . . . . . . . . . . . . . . . . . .
. . . . .11
. . . . .11
. . . . .11
. . . . .11
. . . . .12
. . . . .12
. . . . .12
. . . . .13
Vacuuming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Set the adjustable floor nozzle
Vacuuming with accessories . .
Parking aid . . . . . . . . . . . . . . .
Vacuuming stairs . . . . . . . . . . .
...
...
...
...
..
..
..
..
..
..
..
..
..
..
..
..
.
.
.
.
..
..
..
..
..
..
..
..
..
..
..
..
...
...
...
...
..
..
..
..
..
..
..
..
.14
.15
.15
.16
After vacuuming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Disconnecting the appliance . . . . . . . . . . . . . . . . . . . . . . . . . .16
Sliding the telescopic tube . . . . . . . . . . . . . . . . . . . . . . . . . . .17
Storing and transporting . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
Disassembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Removing the flexible hose . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Removing the telescope tube . . . . . . . . . . . . . . . . . . . . . . . . .18
Removing the floor nozzle . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
2
Bedienung-en_GS40_8001 001 871_StiWa 04.03.2014 13:11 Seite 3
Table of content
Cleaning and care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Emptying the dust container . . . . . . . . . . . . . . . . . . . . . . . . . .19
Removing the dust container . . . . . . . . . . . . . . . . . . . . . . . . .19
Maintaining the dust separation system . . . . . . . . . . . . . . . . .21
In normal operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
Cleaning the foam filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
In the event of a fault . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
Removing a blockage from the dust separation unit . . . . . . . .23
Exhaust filter care . . . . . . . . . . . .
Cleaning a washable HEPA filter . .
Replacing the HEPA-filter . . . . . . .
Cleaning the micro filter . . . . . . . .
..
..
..
..
..
..
..
..
.....
.....
.....
.....
....
....
....
....
...
...
...
...
..
..
..
..
..
..
..
..
.24
.24
.26
.27
Cleaning instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
Notes on the energy label . . . . . . . . . . . . . . . . . . . . . . . . . . .29
Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
Costumer service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31
Conditions of guarantee . . . . . . . . . . . . . . . . . . . . . . . . . . . .31
3
Bedienung-en_GS40_8001 001 871_StiWa 04.03.2014 13:11 Seite 4
Safety information
Please keep this instruction manual. When passing the vacuum
cleaner on to a third party, please also pass on this instruction
manual.
Intended use
This vacuum cleaner is intended for domestic use and not for commercial use. Only use this vacuum cleaner in accordance with the
instructions in this instruction manual. The manufacturer will not
accept any responsibility for damage caused by improper use or incorrect operation.
Therefore, please note the following points.
The vacuum cleaner must only be operated with:
Original replacement parts, accessories or special accessories
In order to prevent injuries and damage, the vacuum cleaner
must not be used for:
Vacuum-cleaning persons or animals
Vacuuming up:
- insects or spiders.
- hazardous, sharp-edged, hot or glowing substances.
- damp or liquid substances.
- highly flammable or explosive substances and gases.
- ash, soot from tiled stoves and central heating systems.
- toner dust from printers and copiers.
4
Bedienung-en_GS40_8001 001 871_StiWa 04.03.2014 13:11 Seite 5
Safety information
Safety information
This vacuum cleaner complies with the recognised rules of technology and the relevant safety regulations.
The appliance may be used by children over the age of 8 years and
by persons with reduced physical, sensory or mental capacity or by
persons with a lack of experience or knowledge if they are
supervised or have been instructed on the safe use of the
appliance and the have understood the potential dangers of using
the appliance.
Children must never play with the appliance.
Cleaning and user maintenance must never be carried out by
children without supervision.
Plastic bags and films must be kept out of the reach of children
before disposal. => Risk of suffocation.
Proper use
Only connect and use the vacuum cleaner in accordance with
the specifications on the rating plate.
Never vacuum without the dust bag or dust container, motor
protection or exhaust filter.
=> This may damage the vacuum cleaner.
Always keep the vacuum cleaner away from your head when
using nozzles and tubes.
=> This could cause injury!
When vacuuming stairs, the appliance must always be positioned below the user.
Do not use the power cord or the hose to carry or transport the
vacuum cleaner.
For safety reasons, if this appliance's mains power cable becomes damaged, it must be replaced by the manufacturer, their
after-sales service department or a similarlyqualified person.
5
Bedienung-en_GS40_8001 001 871_StiWa 04.03.2014 13:11 Seite 6
Safety information
If using the appliance for longer than 30 minutes, pull out the
power cord completely.
When disconnecting the appliance from the mains, pull on the
plug itself to remove it; do not pull on the power cord.
Do not pull the power cord over sharp edges or allow it to become trapped.
When the cable is being automatically rewound, ensure that the
mains plug is not thrown towards persons, body parts, animals
or objects.
=> Use the mains plug to guide the power cord.
Pull out the mains plug before carrying out any work on the
vacuum cleaner.
Do not operate the vacuum cleaner if it is damaged. Unplug the
appliance from the mains if a fault is detected.
For safety reasons, only authorised after-sales service personnel
are permitted to carry out repairs and fit replacement parts to
the vacuum cleaner.
Protect the vacuum cleaner from the weather, moisture and
sources of heat.
Do not pour flammable substances or substances containing
alcohol onto the filters (dust bag, motor protection filter,
exhaust filter, etc.).
The vacuum cleaner is not suitable for use on construction sites.
=> Vacuuming up building rubble could damage the appliance.
When not in use, switch off the appliance and pull out the mains
plug.
At the end of its life, the appliance should immediately be rendered unusable, then disposed of in an appropriate manner.
6
Bedienung-en_GS40_8001 001 871_StiWa 04.03.2014 13:11 Seite 7
Safety information
! Please note
The mains socket must be protected by at least a 16 amp circuit breaker.
If a circuit breaker is tripped when you switch on the vacuum
cleaner, this may be because other electrical appliances which
have a high current draw are connected to the same power circuit.
To prevent the circuit breaker from tripping, select the lowest
power setting before switching the appliance on, and increase
the power only once it is running.
7
Bedienung-en_GS40_8001 001 871_StiWa 04.03.2014 13:11 Seite 8
Your vacuum cleaner
17
5
6
18
7
8
4
9
3
10
11
12
2
13
1
14
8
15 16
Bedienung-en_GS40_8001 001 871_StiWa 04.03.2014 13:11 Seite 9
Your vacuum cleaner
1 Adjustable floor tool
11 Carrying handle
2 Telescopic tube with sliding
12 On/Off button with
switch but without accessory
electronic suction
connection
regulator
3 Flexible hose
4
Handle
5
Foam filter
6
Parking aid on the back of
the appliance
7
Exhaust filter lid
13 Filter control display
(Sensor Control)
14 Dust container with
carrying handle
15 Storage aid on the
underside of the appliance
8 Power cord
16 Fluff filter cover
9 Appliance lid
17 Professional upholstery
10 Foam filter lid
nozzle
18 Crevice nozzle
9
Bedienung-en_GS40_8001 001 871_StiWa 04.03.2014 13:11 Seite 10
Replacement parts and special accessories
A
A TURBO-UNIVERSAL® brush for
upholstery BBZ42TB
All-in-one brushing and vacuuming of
upholstered furniture, mattresses, car
seats, etc. Especially suitable for
picking up pet hair. The brush roller is
driven by the suction air flow through
the vacuum cleaner.
No separate electrical connection is
needed.
B
C
B TURBO-UNIVERSAL® brush for floors
BBZ102TBB
All-in-one brushing and vacuuming of
rugs and carpets as well as all hard
floor coverings.
Especially suitable for picking up pet
hair. The brush roller is driven by the
suction air flow of the vacuum cleaner.
No separate electric connection is
needed.
C Hard-floor nozzle BBZ123HD
For vacuuming hard floors
(parquet, tiles, terracotta, etc.)
D
10
D Hard-floor nozzle BBZ124HD
With 2 rotating brush rollers
For caring for expensive hard floors
and for the improved collection of
coarse dirt.
Bedienung-en_GS40_8001 001 871_StiWa 04.03.2014 13:11 Seite 11
Initial use
Connecting the flexible hose
1
Click!
2
Figure 1
● Push the flexible hose adapter
into the air intake opening on the
appliance and lock it in place.
You will hear an audible 'click'.
Putting the handle and the
telescopic tube together
Figure 2
● Push the handle into the telescopic tube.
3
Inserting the telescopic tube
into the floor nozzle
Figure 3
● Push the telescopic tube into the
connecting piece of the floor
nozzle.
11
Bedienung-en_GS40_8001 001 871_StiWa 04.03.2014 13:11 Seite 12
Initial use
Adjusting the telescopic tube
4
2
1
5
Figure
● Unlock the telescopic tube by
moving the sliding switch in the
direction of the arrow and adjust
it to the desired length. The slide
resistance on carpet is at its
lowest when the telescopic tube
has been completely pulled out.
Connecting the appliance
Figure 5
● Holding the power cord by the
plug, pull out to the required
length and insert the plug into
the mains socket.
6
Switch on /off
Figure 6
● To switch the vacuum cleaner on
or off, press the ON/OFF button.
12
Bedienung-en_GS40_8001 001 871_StiWa 04.03.2014 13:11 Seite 13
Initial use
7
Controlling the suction level
Figure 7
Turn the control knob to infinitely
adjust the suction level to the
level required.
Low power range
=>
For vacuuming delicate materials, e.g. delicate upholstery, curtains, etc.
Medium power range
=>
For daily vacuuming of lightly soiled floors.
High power range
=>
For vacuuming durable floor
coverings, hard floors and heavily soiled surfaces.
13
Bedienung-en_GS40_8001 001 871_StiWa 04.03.2014 13:11 Seite 14
Vacuuming
8
Set the adjustable floor nozzle
Figure 8
Rugs and carpets
Hard floors/parquet
=>
=>
If you are vacuuming up large particles, make sure that you vacuum
them up successively and carefully to ensure that the vacuum channel of the floor nozzle does not
become blocked.
If necessary, you should raise the
nozzle in order to better vacuum
up the dirt particles.
!Caution
Floor nozzles are subject to a
certain amount of wear, depending on the type of hard floors
you have (e.g. rough, rustic
tiles). You must there-fore check
the underside of the floor nozzle
at regular intervals. Worn undersides of floor nozzles may have
sharp edges that can damage
sensitive hard floors, such as
parquet or li-noleum. The manufacturer does not accept any responsibility for damage caused by
worn floor nozzles.
14
Bedienung-en_GS40_8001 001 871_StiWa 04.03.2014 13:11 Seite 15
Vacuuming
9
Vacuuming with accessories
Attach the nozzles to the suction
pipe or handle as required:
Figure 9
● Crevice nozzle for vacuuming
crevices and corners, etc.
● Upholstery nozzle for vacuuming
upholstered furniture, curtains,
etc.
Turbo Brush
If your appliance is equipped with
a turbo brush, refer to the accompanying instruction manual for
instructions on its use and maintenance.
10
Parking aid
Figure 10
You can use the parking aid on the
back of the vacuum cleaner if you
want to stop vacuuming for a
short time.
● After
switching off the appliance,
slide the hook on the floor nozzle into the parking aid.
15
Bedienung-en_GS40_8001 001 871_StiWa 04.03.2014 13:11 Seite 16
Vacuuming
Vacuuming stairs
11
Figure 11
When vacuuming stairs, the appliance must be positioned at the
bottom of the stairs.
If it does not reach far enough, the
appliance can also be carried using
the carrying handle or the handle
on the dust container.
After vacuuming
Disconneting the appliance
12
1
2
16
Figure 12
● Switch off the appliance.
● Remove the main plug.
● Briefly pull on the power cord
and then let go. (The power cord
retracts automatically).
Bedienung-en_GS40_8001 001 871_StiWa 04.03.2014 13:11 Seite 17
After vacuuming
Sliding the telescopic tube
13
2
1
14
Figure 13
● Unlock the telescopic tube by
moving the sliding switch in the
direction of the arrow and slide
one tube into the other.
Storing and transporting
Figure 14
To store the appliance, use the
storage aid on the underside.
● Prop
up the appliance with the
hose or dust container handle.
● Slide the hook on the floor nozzle into the storage aid.
17
Bedienung-en_GS40_8001 001 871_StiWa 04.03.2014 13:11 Seite 18
Disassembly
Removing the flexible hose
15
2
1
16
1
Figure 15
● To remove the flexible hose,
press the two catches together
and pull out the hose from the
appliance's suction opening.
Removing the telescopic tube
Figure 16
● To release the connection, turn
the handle slightly and pull it out
of the telescopic tool.
17
Removing the floor nozzle
Figure 17
● To release the connection, turn
the telescopic tube slightly and
pull it out of the floor nozzle.
18
Bedienung-en_GS40_8001 001 871_StiWa 04.03.2014 13:11 Seite 19
Cleaning and care
Emptying the dust container
18
Figure 18
In order to achieve the best possible vacuuming results, the dust
container should be emptied after
every use or, at the latest, when
dust in the dust container has reached the marking at any point.
!Caution
The dust container can only be
removed when the appliance is in
a horizontal position. Therefore,
place the appliance on the floor
to unlock the release button.
Removing the dust container
19
Figure 19
● Press the release button and pull
the dust container out of the
appliance using the handle.
1
2
19
Bedienung-en_GS40_8001 001 871_StiWa 04.03.2014 13:11 Seite 20
Cleaning and care
● Remove
the lid from the dust
container and empty the dust
container.
19
● Put
the lid back on the dust container.
● Remove
any dirt which may have
been lodged underneath the
container ejector opening.
● Insert
the dust container in the
appliance, so that it 'clicks'
audibly into place.
Click!
20
Bedienung-en_GS40_8001 001 871_StiWa 04.03.2014 13:11 Seite 21
Cleaning and care
Maintaining the dust separation system
Your appliance is equipped with a
Sensor Control indicator. This
function constantly monitors
whether your vacuum cleaner is
working at its optimum power
level. Fig. 20
In normal operation
20
Figure 20
The indicator (blue ring) flashes
red when the foam filter needs to
be cleaned. The appliance is
automatically adjusted to the
lowest power level.
Cleaning the foam filter
21
2
Switch off the appliance.
1
Figure 21
• Open the lid of the foam filter by
pulling on the locking lever.
21
Bedienung-en_GS40_8001 001 871_StiWa 04.03.2014 13:11 Seite 22
Cleaning and care
21
• Remove the filter cartridge with
foam filter using the tab.
• Remove the foam filter from the
filter cartridge and tap out both
parts.
• If they are very dirty, the foam filter and filter cartridge should be
cleaned under running water.
Alternatively, the unit can be cleaned in the washing machine at
max. 30 °C using a gentle programme and the lowest spin
speed.
TIP To protect other laundry
items, put the filter unit into
a laundry bag.
• Allow the foam filter and filter
cartridge to dry completely (at
least 24 hours) and then reinsert
the foam filter into the filter cartridge.
• Insert the filter cartridge with
foam filter back into the appliance. Close the lid of the foam filter.
!Caution
The lid will only close if a filter
has been inserted.
22
Bedienung-en_GS40_8001 001 871_StiWa 04.03.2014 13:11 Seite 23
Cleaning and care
In the event of a fault
The Sensor Control indicator also
flashes after the foam filter has
been cleaned:
Removing a blockage from the
dust separation unit
22
Figure 22
• Switch off the appliance.
• Hold the appliance lid by the
recessed handle and open it.
2
1
• Unlock the cover by turning it
anti-clockwise, and remove it
from the appliance.
=> Remove the blockage from
the collecting unit.
• Put the cover back on and lock it
in place by turning it clockwise.
=>Close the appliance lid.
If the Sensor Control indicator
continues to flash red, check
whether the nozzle, suction pipe
or flexible hose are blocked. This
can also trigger the Sensor
Control indicator.
23
Bedienung-en_GS40_8001 001 871_StiWa 04.03.2014 13:11 Seite 24
Exhaust filter care
Depending on the model, your
appliance is equipped with either
a HEPA filter Fig. 23 or a micro
filter Fig. 25 .
Depending on the model, your
appliance has additional sound
insulation behind the HEPA or
micro filter. This does not have to
be cleaned.
HEPA filter
You can determine with which
HEPA filter your appliance is
equipped by looking at the imprint
on the filter frame next to the
reference number:
• "washable" – the filter can be
washed.
• No additional imprint – the filter
must be replaced.
Cleaning a washable HEPA filter
The HEPA filter with the "washable"
imprint is designed so that it does
not need to be replaced, provided
the appliance is used as intended in
the household.
To ensure that the vacuum cleaner
is working at its optimum power
level, the exhaust filter should be
rinsed out after one year. The
filtering action of the filter remains
intact, even if the filter surface
becomes discoloured.
24
Bedienung-en_GS40_8001 001 871_StiWa 04.03.2014 13:11 Seite 25
Exhaust filter care
Hepa
23
1
2
Figure 23
• Open the lid of the exhaust filter
by pushing and pulling on the
locking tab.
• Unlock the HEPA filter and remove it from the appliance.
• Tap out the filter unit and rinse it
under running water.
Alternatively, the unit can be cleaned in a washing machine at
max. 30 °C using a gentle programme and the lowest spin
speed.
TIP: To protect other laundry
items, put the filter unit into
a laundry bag.
Click!
• Once the HEPA filter has dried
completely (at least 24 hours),
insert it back into the appliance
and lock it in place.
=> Close the exhaust filter lid. In
doing so, push the lock bar
upwards until it audibly clicks
into place.
25
Bedienung-en_GS40_8001 001 871_StiWa 04.03.2014 13:11 Seite 26
Exhaust filter care
24
Hepa
1
2
Replacing the HEPA filter
(only for appliances without a
washable HEPA filter)
To ensure that the vacuum cleaner
can work at its optimum power
level, the HEPA filter should be
replaced after one year.
Figure 24
• Open the lid of the exhaust filter
by pushing and pulling on the
locking tab.
• Unlock the HEPA filter and remove it from the appliance.
• Dispose of the old HEPA filter
with your household waste.
• Insert the new HEPA filter into
the appliance and lock it in
place.
=> Close the exhaust filter lid. In
doing so, push the lock bar
upwards until it audibly clicks
into place.
Click!
26
Bedienung-en_GS40_8001 001 871_StiWa 04.03.2014 13:11 Seite 27
Exhaust filter care
Micro filter
25
1
2
Cleaning the micro filter
The micro filter is designed so
that it does not need to be
replaced, provided the appliance
is used as intended in the
household.
To ensure that the vacuum cleaner
is working at its optimum power
level, the exhaust filter should be
rinsed out after one year. The
filtering action of the filter
remains intact, even if the filter
surface becomes discoloured.
Figure 25
• Open the lid of the exhaust filter
by pushing and pulling on the
locking tab.
• Pull the locking tab to unlock the
filter unit with foam filter and
microfilter and remove it from
the appliance.
• Remove the foam filter and
microfilter from the filter frame.
27
Bedienung-en_GS40_8001 001 871_StiWa 04.03.2014 13:11 Seite 28
Exhaust filter care
• Rinse the foam filter and micro
filter under running water.
Alternatively, they can be cleaned in the washing machine at
max. 30 °C using a gentle programme and the lowest spin
speed.
TIP: To protect other laundry
items, put the unit into a
laundry bag.
25
• Once the foam filter and microfilter have dried completely (at
least 24 hours), insert them back
into the filter frame.
• Insert the filter unit in the appliance and ensure that the locking
tabs audibly click into place.
• Close the exhaust filter lid. In
doing so, push the lock bar
upwards until it audibly clicks
into place.
Click!
Click!
28
Bedienung-en_GS40_8001 001 871_StiWa 04.03.2014 13:11 Seite 29
Cleaning instructions
Always switch off the vacuum cleaner and disconnect the power
cord from the mains before cleaning the vacuum cleaner. The
vacuum cleaner and plastic accessories can be cleaned with an
ordinary plastic cleaner.
Caution: do not use a scourer, glass-cleaning agent or
multipurpose cleaning product. Never immerse the vacuum
cleaner in water.
Subject to technical modifications.
Notes on the energy label
This vacuum cleaner is a general purpose vacuum cleaner.
To achieve the declared energy efficiency and cleaning performance class on carpet and hard floor, please use the interchangeable universal nozzle.
The values provided on the energy label have been determined
according to the prescribed measuring process (in accordance
with EN60312-1).
29
Bedienung-en_GS40_8001 001 871_StiWa 04.03.2014 13:11 Seite 30
Disposal
"This appliance is labelled in accordance
with European Directive 2012/19/EU concerning used electrical and electronic
appliances (waste electrical and electronic equipment - WEEE). The guideline
determines the framework for the return
and recycling of used appliances as applicable throughout the EU."
Disposal information
Packaging
The packaging is designed to protect the vacuum cleaner from being
damaged during transportation. It is made of environmentally friendly
materials and can therefore be recycled.
Dispose of packaging that is no longer required at an appropriate
recycling point.
Old appliances
Old appliances still contain many valuable materials. Therefore, please
take appliances that have reached the end of their service to your
retailer or recycling centre so that they can be recycled.
For current disposal methods, please enquire at a retailer or your local
council.
Disposal of filters and dust bags
Filters and dust bags are manufactured from environmentally friendly
materials. Provided they do not contain substances that are not
permitted in household waste, you can dispose of them with your
normal household waste.
30
Bedienung-en_GS40_8001 001 871_StiWa 04.03.2014 13:11 Seite 31
Costumer service
GB Great Britain
BSH Home Appliances Ltd.
Grand Union House
Old Wolverton Road
Wolverton
Milton Keynes MK12 5PT
To arrange an engineer visit, to order spare parts and accessories
or for product advice please visit:
www.bosch-home.co.uk
or call
Tel.: 0844 892 8979*
*Calls from a BT landline will be charged at up to 3 pence per minute. A call
set-up fee of up to 6 pence may apply.
Conditions of guarantee
For this appliance the guarantee conditions as set out by our
representatives in the country of sale apply. Details regarding
same may be obtained from the dealer from whom the appliance
was purchased. For claims under guarantee the sales receipt
must be produced.
31
Bedienung-en_GS40_8001 001 871_StiWa 04.03.2014 13:11 Seite 32
Robert Bosch Hausgeräte GmbH
Carl-Wery-Str. 34
81739 München
Germany
www.bosch-home.com
8001 001 871 - 03/2014
9000 897 085 – 06/13
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising