Canon | XEED 4K6021Z | User manual | Canon XEED 4K6021Z User manual

Canon XEED 4K6021Z User manual
MULTIMEDIA PROJECTOR
Safety Instructions
Before Use
Basic Guide
User’s Manual
Projection Procedure
Convenient Projection
Features
Installation Procedure
Installation Guide
Connection Procedure
Adjusting the Image
Special Arrangements
Using Menus
Menu Guide
Menu Configuration
Menu Description
Maintenance
Product Specifications
Troubleshooting
ENG
How to Use This Manual
Thank you for purchasing a Canon projector.
The 4K6021Z Multimedia Projector is a high-performance laser projector
capable of projecting high-resolution computer screens and high-quality
digital images on a large screen.
This Manual
This is the user’s manual for 4K6021Z Multimedia Projector (hereafter, “projector”).
The “Basic Guide” describes basic steps before projection and introduces features
that are convenient in presentations and other situations. The “Installation Guide”
covers how to install the projector and join a network, and the “Menu Guide”
explains setting menus and how to use them.
Read this manual thoroughly to make the most of your projector. We recommend
requesting installation by a qualified technician or the Canon Customer Support
Center.
Symbols of Button Operations
The projector can be operated using the buttons on the remote control or on the
side of the projector. The remote control allows you to operate all functions of the
projector.
In this document, the button’s operations are shown as below.
Remote control button
operation
Focusing / Resizing the Image
Operation of buttons
on side of projector
Press the ZOOM button on the remote control to adjust the image size, and press
the FOCUS button to adjust the focus. You can also press the LENS button on the
projector once to adjust focus and twice to adjust image size.
Projector
Remote control
LENS button
FOCUS button
ZOOM button
Indicate the buttons to
be pressed
Symbols Used in This Manual
Sections labeled with these symbols give the following kinds of information.
Indicates precautions and information to note when using the projector.
2
Table of Contents
How to Use This Manual............... 2
Connection Procedure................62
Projector Highlights...................... 4
Connecting Other Equipment ............. 62
Safety Instructions........................ 6
Connecting to a Network..................... 65
Controlling the Projector from a
Computer .............................................. 79
Safety Symbols in this Manual ........... 12
Precautions for Use ............................. 13
Adjusting the Image ....................81
Power Supply ....................................... 13
Filling the Screen ................................. 81
Installation and Use ............................. 15
Adjusting Keystone Distortion ........... 81
Laser Light Source .............................. 16
Advanced Registration to Adjust
Projected Images ................................. 85
Remote Control Batteries.................... 17
Handling................................................ 17
For Safe Use ................................ 19
Adjusting Projected Images
with Partial Distortion Correction....... 89
Carrying and Installation..................... 19
Adjustment Using a Test Pattern ....... 92
Before Installation....................... 21
Special Arrangements ................93
Precautions When Carrying /
Shipping the Projector ........................ 21
Adjusting Peripheral Focus ................ 93
Projecting from Multiple Projectors at
Once (Edge Blending) ......................... 96
Precautions for Installation................. 21
Open Source Software ............... 26
Menu Guide ..........................101
Before Use ................................... 27
Using Menus ..............................102
Included Accessories .......................... 27
Menu Configuration ..................105
Projector Part Names and
Functions.............................................. 28
Menu Description ......................113
Remote Control .................................... 33
Input settings ..................................... 113
Basic Guide ............................38
Image adjustment .............................. 117
Projection Procedure.................. 39
System settings ................................. 139
Install settings .................................... 127
Step 1 Connect Other Equipment....... 40
Network settings ................................ 158
Step 2 Turn the Projector On .............. 41
Checking Projector Information ....... 173
Step 3 Select an Input Signal.............. 42
Projector Web Screen Menu..... 174
Step 4 Adjust the Image ...................... 43
Maintenance /
Product Specifications /
Troubleshooting ..................190
Step 5 Select the Image Quality
(Image Mode)........................................ 44
Turn the Projector Off.......................... 46
Convenient Projection
Features ....................................... 47
Maintenance...............................191
Convenient Features ........................... 47
Cleaning the Projector....................... 191
Installation Guide...................50
Product Specifications .............193
Installation Procedure ................ 51
Troubleshooting ........................205
Relationship Between Projecting
Distance and Image Size ..................... 51
LED Indicator Details ......................... 205
Replacing the Air Filter...................... 191
Symptoms and Solutions .................. 206
Installing / Removing the Lens Unit ... 53
Index ...........................................211
Installation ............................................ 56
Option.........................................213
3
Projector Highlights
Bright Yet Compact, With a Laser Light Source
A bright projector that is also compact, at 480 x 545 x 196 mm (18.9 x 21.5 x 7.7 in.,
W x D x H). Features a laser light source that lasts longer than traditional mercury
lamps.
Peripheral Focus Adjustment
Image focus can be adjusted on the edges of the screen, enabling use in dome
projection.
HDBaseT Input
The projector supports HDBaseT, a next-generation connectivity standard.
HDBaseT offers a convenient connection for carrying high-quality video and audio
signals equivalent to HDMI across distances up to 70 m (229.7')* over a single LAN
cable.
* Maximum distance for 2K signals: 100 m (328.1')
Lens Shift
Lens shift enables motorized image repositioning up, down, left, or right for greater
freedom in installation.
Motorized Zoom and Focus Adjustment
Efficient setup using motorized zoom and focus adjustment.
Full Range of Lens Units Available
Choose the optimal lens unit for the projection distance or purpose.
Superior Video Viewing Experience
Refinements in motion blur reduction make video projection more enjoyable to
watch.
Scheduling
Automate projector tasks according to your schedules. Turn the projector on or off,
switch input signals, and more.
Edge Blending
Blend the overlapping edges of images from multiple projectors to make the overall
image more seamless.
4
Projector Highlights
Wi-Fi Connectivity
In addition to wired LAN connectivity, the projector also supports Wi-Fi.
In Projector Access Point (PJ AP) mode, the projector can be connected to up to
five computers without using a wireless access point.
Canon Service Tool for PJ (Canon ST)
An iOS app for easy remote control and status management of projectors over
Wi-Fi. Connect to a projector used as an access point (P66), or connect via an
existing access point (P66). Note that a password is required when using Canon
ST (P174).
DisplayPort
The DisplayPort interface supports 4K_60P_10bit_4:4:4 video signals*, making
possible more realistic images and smoother gradients.
* When two DisplayPort 1.2 ports are used together.
5
Safety Instructions
Before installing and operating the projector, read this manual thoroughly.
This projector provides many convenient features and functions. Operating the
projector properly enables you to manage those features and maintain it in good
condition for many years to come.
Improper operation may result in not only shortening the product life, but also
malfunctions, fire hazards, or other accidents.
If your projector does not seem to be operating properly, read this manual again,
check operations and cable connections, and try the solutions in the
“Troubleshooting” section in the back of this manual. If the problem still persists,
contact the Canon Customer Support Center.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE
CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT
WITHIN THIS UNIT.
THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT
OPERATING AND MAINTENANCE INSTRUCTIONS FOR THIS
UNIT IN THE OWNER’S MANUAL.
CAUTION
Not for use in a computer room as defined in the Standard for the Protection of
Electronic Computer / Data Processing Equipment, ANSI / NFPA 75.
6
Safety Instructions
Safety Precautions
• This projector produces intense light from the projection lens. Do not stare
directly into the lens, otherwise eye damage could result. Be especially careful
that children do not stare directly into the beam.
• Install the projector in a proper position. Otherwise it may result in a fire hazard.
• Do not cover the ventilation slots on the projector. Heat build-up can reduce the
service life of your projector, and can also be dangerous.
• If the projector is unused for an extended time, unplug the projector from the
power outlet.
• Do not project the same image for a long time.
An afterimage may remain on the LCD panels due to the characteristics of the
panels of the projector.
CAUTION ON HANGING FROM THE
CEILING
When hanging the projector from the ceiling, clean the air intake vents and top of
the projector periodically with a vacuum cleaner. If you leave the projector unclean
for a long time, the cooling fans can be clogged with dust, and it may cause a
breakdown or a disaster.
DO NOT SET THE PROJECTOR IN GREASY, WET, OR SMOKY CONDITIONS
SUCH AS IN A KITCHEN TO PREVENT A BREAKDOWN OR A DISASTER. IF
THE PROJECTOR COMES IN CONTACT WITH OIL OR CHEMICALS, IT MAY
BECOME DETERIORATED.
7
Safety Instructions
WARNING:
• THIS APPARATUS MUST BE GROUNDED.
• TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE
THIS APPLIANCE TO RAIN OR MOISTURE.
Safety Instructions
■ READ AND KEEP THIS OWNER’S MANUAL FOR LATER
USE.
All the safety and operating instructions should be read before beginning to operate
the product.
Read all of the instructions given here and retain them for later use. Unplug this
projector from the AC power supply before cleaning. Do not use liquid or aerosol
cleaners on the projector. Use a damp cloth for cleaning.
Follow all warnings and instructions marked on the projector.
For added protection of the projector during a lightning storm, or when it is left
unattended or unused for long periods of time, unplug it from the wall outlet. This
will prevent damage due to lightning and power surges.
Do not expose this unit to rain or use near water... for example, in a wet basement,
near a swimming pool, etc...
Do not use attachments not recommended by the manufacturer as they may result
in hazards.
Do not place this projector on an unstable cart, stand, or table. The projector may
fall, causing serious injury to a child or adult, and serious damage to the projector.
Use only with a cart or stand recommended by the manufacturer, or sold with the
projector. Wall or shelf mounting should be carried out in accordance with the
manufacturer’s directions, and should use a mounting kit approved by the
manufacturers.
An appliance and cart combination should be moved with care.
Sudden stops, excessive force, and uneven surfaces may cause
the appliance and cart combination to overturn.
Slots and openings in the rear and front of the cabinet are provided
for ventilation, to insure reliable operation of the equipment and to protect it from
overheating.
The openings should never be covered with cloth or other materials, and the
bottom opening should not be blocked by placing the projector on a bed, sofa, rug,
or other similar surface. This projector should never be placed near or over a
radiator or heat register.
This projector should not be placed in a built-in installation such as a book case
unless proper ventilation is provided.
8
Safety Instructions
Do not install the projector near the ventilation duct of air-conditioning equipment.
This projector should be operated using only the type of power source indicated on
the marking label. If you are not sure of the type of power supplied, contact the
Canon Customer Support Center or local power company.
Do not overload wall outlets and extension cords as this can result in fire or electric
shock. Do not allow anything to rest on the power cord. Do not locate this projector
where the cord may be damaged by people walking on it.
Do not attempt to service this projector yourself as opening or removing covers
may expose you to dangerous voltages or other hazards. Refer all servicing to
qualified service personnel.
Unplug this projector from the wall outlet and refer servicing to qualified service
personnel under the following conditions:
a. When the power cord or plug is damaged or frayed.
b. If liquid has been spilled into the projector.
c. If the projector has been exposed to rain or water.
d. If the projector does not operate normally after following the operating
instructions. Adjust only those controls that are covered in the operating
instructions as improper adjustment of other controls may result in damage and
will often require extensive work by a qualified technician to restore the projector
to normal operating condition.
e. If the projector has been dropped or the cabinet has been damaged.
f. When the projector exhibits a distinct change in performance-this indicates a
need for servicing.
When replacement parts are required, be sure the service technician uses
replacement parts specified by the manufacturer that have the same characteristics
as the original parts. Unauthorized substitutions may result in fire, electric shock, or
injury.
Upon completion of any service or repairs to this projector, ask the service
technician to perform routine safety checks to determine that the projector is in safe
operating condition.
9
Safety Instructions
Never push objects of any kind into this projector through cabinet slots as they may
touch dangerous voltage points or short out parts that could result in a fire or
electric shock. Never spill liquid of any kind onto the projector.
Safety Instructions
AC Power Cord Requirement
The AC Power Cord supplied with this projector meets the requirements for use in
the country you purchased it.
AC Power Cord for the United States and Canada:
The AC Power Cord used in the United States and Canada is
listed by the Underwriters Laboratories (UL) and certified by
the Canadian Standard Association (CSA).
The AC Power Cord has a grounding-type AC line plug. This is
a safety feature to ensure the plug fits into the power outlet. Do
not try to tamper with this safety feature. Should you be unable
to insert the plug into the outlet, contact your electrician.
Ground
THE SOCKET-OUTLET SHOULD BE INSTALLED NEAR THE EQUIPMENT AND
EASILY ACCESSIBLE.
10
Safety Instructions
These symbols indicate that this product is not to be disposed of
with your household waste, according to the WEEE Directive (2012/
19/EU), the Battery Directive (2006/66/EC) and/or national
legislation implementing those Directives.
If a chemical symbol is printed beneath the symbol shown above, in
accordance with the Battery Directive, this indicates that a heavy
metal (Hg = Mercury, Cd = Cadmium, Pb = Lead) is present in this
battery or accumulator at a concentration above an applicable
threshold specified in the Battery Directive.
This product should be handed over to a designated collection point,
e.g., on an authorized one-for-one basis when you buy a new similar
product or to an authorized collection site for recycling waste
electrical and electronic equipment (EEE) and batteries and
accumulators. Improper handling of this type of waste could have a
possible impact on the environment and human health due to
potentially hazardous substances that are generally associated with
EEE. Your cooperation in the correct disposal of this product will
contribute to the effective usage of natural resources.
For more information about the recycling of this product, please
contact your local city office, waste authority, approved scheme or
your household waste disposal service or visit
www.canon-europe.com/weee, or www.canon-europe.com/battery.
11
Safety Instructions
Only for European Union and EEA (Norway, Iceland and
Liechtenstein)
Safety Instructions
Safety Symbols in this Manual
This section describes the safety symbols used in this manual. Important projector
safety information is identified by the following symbols. Always observe the safety
information by these symbols.
Denotes the risk of death or serious injury from improper
handling if the information is not observed. To ensure safe use,
always observe this information.
Denotes the risk of injury from improper handling if the
information is not observed. To ensure safe use, always observe
this information.
Denotes the risk of electric shock from improper handling if the
information is not observed. To ensure safe use, always observe
this information.
Denotes the risk of burns from improper handling if the
information is not observed. To ensure safe use, always observe
this information.
Denotes prohibited actions.
Denotes required actions or information that must be observed.
12
Safety Instructions
Precautions for Use
Power Supply
During installation, keep the projector plug easily accessible so that the projector can be
unplugged immediately if necessary, or keep a circuit breaker within reach.
If the following situations occur, turn the power off, remove the power plug from the
power outlet and contact the Canon Customer Support Center. Failure to do so could
cause a fire or result in an electric shock.
•
•
•
•
•
If smoke is emitted
If an unusual smell or noise is emitted
If water or other liquid has entered the projector
If metal or any other foreign material has entered the projector
If the projector is knocked over or dropped and the cabinet is
damaged
Pay attention to the following points regarding the power source, power plug and
handling of the connector. Failure to do so may cause a fire or electric shock.
• Do not place any objects on the power cord and do not allow it to
become trapped under the projector.
• Do not cover the power cord with a carpet.
• Do not modify or excessively bend, twist, pull, wind, or bundle the
power cord.
• Keep the power cord away from heaters and other sources of
heat.
• Do not use a damaged power cord. If the power cord is
damaged, contact the Canon Customer Support Center.
• Do not use any power source with a voltage other than the voltage
indicated (AC 100 – 240 V).
• Do not insert any metal objects into the contact parts of the
power plug or connector.
• The power cord included with this projector is for use exclusively
with this product. Do not use this cord for other products.
• Do not remove the power plug or connector with wet hands.
13
Safety Instructions
As this section contains important safety-related information, be sure to read the
following carefully beforehand in order to use your projector correctly and safely.
Safety Instructions
Pay attention to the following points regarding the power source, power plug and
handling of the connector. Failure to do so may cause a fire or electric shock.
• Insert the power plug and connector securely up to the base.
Additionally, do not use a damaged power plug or an outlet that is
loose.
• Do not pull the power cord and be sure to hold the power plug or
connector when removing. Incorrect handling may damage the
power cord.
• When using an extension cord, do not exceed the cord’s rated
capacity.
• Do not exceed the rated capacity of the outlet (as by using it for
more than one piece of equipment), which poses a risk of fire
from overheating.
• Periodically inspect the power plug and outlet and remove any
dust or dirt from between the plug and the outlet.
• Do not touch the projector itself, the power cord, or the cable if
lightening strikes.
• Do not move the projector until you have switched off the power,
removed the power plug from the power outlet and unplugged
any other cables.
• Unplug the projector before cleaning or maintenance.
• Before you install or remove the lens unit, be sure to unplug the
power plug of the projector from the power outlet.
14
Safety Instructions
Pay attention to the following points regarding installation and handling of the projector.
Failure to do so may cause a fire, electric shock or personal injury.
• Do not use the projector where it might get wet, such as outdoors
or by bathtubs or showers.
• Do not place containers containing a liquid on top of the
projector.
• Do not install the projector in a location that is damp or dusty, or
where there is a lot of oily smoke or steam. Oil can degrade the
plastic, which could result in a ceiling-mounted projector falling
from its mounting.
• Make sure to implement anti-fall measures such as an anti-fall
wire when installing the projector in high places, for example,
installing it on the ceiling.
• Do not remove the cabinet from the projector or disassemble it.
The interior of the projector contains high-voltage components as
well as parts that are hot. If inspection, maintenance or repair is
required, contact the Canon Customer Support Center.
• Do not disassemble or modify the projector (including
consumable parts) or the remote control.
• Do not look directly into the exhaust vents during use.
• Do not insert any object into vents in the projector, such as the air
intake vent or exhaust vents.
• Do not place a pressurized can in front of the exhaust vents. The
pressure of the contents of the can may increase due to heat
from the exhaust vents and this could result in an explosion.
• When cleaning off dust or dirt from projector parts such as the
lens or filter, never use any spray that is flammable. Internal parts
that become hot may ignite and cause a fire.
• Do not use adhesives, lubricants, oils, or alkaline detergents for
maintenance of the projector. They could adhere to the cabinet
and damage it, possibly resulting in the projector falling from its
mounting and causing an accident or personal injury.
• As strong light beams are emitted
while the projector is in use, do
not look directly into the projector
lens. Doing so could cause an
eye injury. Pay particular attention to prevent small children from
doing so.
• Operators shall control access to the beam within the hazard
distance or install the product at a height that will prevent eye
exposure within the hazard distance.
15
Safety Instructions
Installation and Use
Safety Instructions
Pay attention to the following points regarding installation and handling of the projector.
Failure to do so may cause a fire, electric shock or personal injury.
• Do not hold or install optical instruments (such as magnifying
glasses, reflectors, or glasses) in the path of light from the
projector. If projected light is refracted or reflected and enters
people’s eyes, it may result in eye injury.
• If children may approach the projector or touch it, always ensure
the projector is used under adult supervision.
• No direct exposure to the beam shall be permitted.
• Do not lift the projector alone. Have at least one assistant.
• When setting the projector on a high surface for projection, be
sure the surface is flat and stable.
• Do not use the projector on a soft surface such as carpet or
sponge mat, etc.
• For ceiling mounting or other installation work, request service
from a qualified technician or the Canon Customer Support
Center. Poor installation work could result in an accident.
• To avoid hazards such as parts falling when the lens of a ceilingmounted projector is replaced, request service from a qualified
technician or the Canon Customer Support Center.
• Do not use where combustible or explosive gases may occur.
Internal parts that become hot may ignite and cause a fire.
Laser Light Source
• The projector incorporates a laser module. Disassembly or
modification is dangerous and must not be attempted.
• Operate and adjust the projector only as described in this
manual. Incorrect operation or adjustment poses a risk of
exposure to potentially hazardous laser light.
• Do not use when damaged. Even if the projector is used as
described in this manual, failure to discontinue use when it is
damaged (as indicated by screen abnormalities) may result in
fire, electric shock, or eye injury from laser light.
• For assistance when disposing of the projector, contact the
Canon Customer Support Center. Do not disassemble the
projector yourself when disposing of it.
16
Safety Instructions
Pay attention to the following points regarding handling of batteries. Failing to do so
could result in a fire or personal injury.
• Do not heat, short circuit or disassemble the batteries, or place
them in a fire.
• Do not attempt to recharge the batteries that are included with
the remote control.
• Remove the batteries when they are flat or when the remote
control will not be used for a long period of time.
• When replacing the batteries, replace both at the same time.
Also, do not use two batteries of a different type at the same
time.
• Insert the batteries with the + and – terminals in the correct
directions.
• If any liquid from inside the batteries leaks out and contacts your
skin, be sure to wash the liquid off thoroughly.
Handling
Pay attention to the following points regarding installation and handling of the projector.
• If the projector will not be used for a long period of time, be sure
to remove the power plug from the power outlet to ensure safety.
Failure to do so presents a risk of fire if dust accumulates on the
plug or outlet.
• Do not plug headphones or earphones into the AUDIO OUT
terminal. Doing so may cause hearing impairment.
• Do not set the volume too high initially. Doing so may cause
hearing impairment from sudden sounds played at high volume.
Lower the volume before turning off the projector, and after
startup, raise it gradually.
• Do not touch parts of the cabinet around and above the exhaust
vents, which may become hot during projection. Pay particular
attention in preventing young children from touching these parts.
Additionally, do not place any metal objects around or above the
exhaust vents. Such objects may become hot from the projector,
which may result in burns or other injury.
17
Safety Instructions
Remote Control Batteries
Safety Instructions
Pay attention to the following points regarding installation and handling of the projector.
• Do not place any heavy objects on top of the projector or sit/
stand on it. Pay particular attention to prevent small children from
doing so. The projector may be knocked over and this could
result in damage or a personal injury.
• Do not place the projector on an unstable or slanted surface.
Doing so may cause the projector to fall or be knocked over and
could result in a personal injury.
• Do not place any objects in front of the lens
during projection. Doing so could cause a fire.
• The projector is provided with a lens shift
function to move the lens up, down, left, and
right using the motor. Do not touch the lens while it is moving.
Touching the lens when it is moving may result in personal injury.
• Before replacing the lens unit, wait at least 30 minutes after the
projector is turned off to allow the lens unit to cool down. Failure
to do so may result in burns or injury.
18
For Safe Use
Pay attention to the following points when carrying or transporting the projector.
• If transportation is necessary, the lens unit should be removed before
transporting the projector. If the projector is subjected to excessive impacts
during transportation, the lens unit or projector may be damaged.
• This projector is a precision instrument. Do not knock it over or subject it to
impacts. Doing so may cause a malfunction.
• Retract the adjustable feet before moving the projector. Leaving the feet
extended may cause damage.
• When carrying or holding up the projector after attaching the lens unit, be
sure not to hold the lens. Doing so may cause damage to the lens unit or
projector.
• Do not touch the lens with bare hands. Any smudges or fingerprints on the
lens may affect image quality.
• Protection of the projector cannot be guaranteed if used packaging or shockabsorbent materials are reused. Fragments from shock-absorbent material
may also enter the interior of the projector which could cause a malfunction.
19
For Safe Use
Carrying and Installation
For Safe Use
Pay attention to the following points when installing or using the projector.
• Be careful of condensation.
If the projector is abruptly taken to a warmer location, or if the room
temperature rises abruptly, moisture in the air may condense on the lens or
mirror and affect projected images. In this case, wait a while and make sure
the moisture has evaporated before resuming use.
• Do not install the projector in a location where the temperature is high or low.
Doing so may cause a malfunction. Ranges for the environment of use and
storage are as follows.
• Environment of use: 0°C (32°F) to 45°C (113°F), 20% to 85% RH
• Storage temperature: -20°C (-4°F) to 60°C (140°F)
• When using the projector at altitudes above 2,300 m (7,545.8'):
Adjust projector installation settings from the menu (P133).
• Install the projector leaving at least 50 cm (1.6') between air intake/exhaust
vents and walls on each side of the projector. Leave a gap of at least 2 cm
(0.8") from the bottom of the projector. There is an air intake underneath the
projector. Failure to leave enough space may trap heat inside the projector
and damage it.
At least
2 cm (0.8")
At least
50 cm (1.6')
At least
At least
50 cm (1.6') 50 cm (1.6')
• Do not place any objects on top of the projector that may change shape or
color due to heat.
• Do not install the projector near high-voltage electrical power lines or an
electrical power source. This may cause malfunction.
• Afterimages may occur when the image changes after the same image has
been projected for some time. This is due to the nature of the LCD panels
and does not indicate a problem. The afterimage will dissipate after a while
during normal projection.
20
Before Installation
Prepare the projector as described below before carrying it.
• Disconnect the cables connected to the projector. Carrying the
projector with the cables attached may cause an accident.
• Retract the adjustable feet before moving the projector. Leaving
the feet extended may cause damage.
• Do not subject the projector to strong impacts or vibrations.
Precautions for Installation
Be sure to read “Safety Instructions” and “For Safe Use” (P6 – P19). Also
take the following precautions during installation.
• Do not strike the projector or subject it to impact. Doing so may
cause a malfunction.
• Do not install the projector standing on one side or in other
unsteady positions. The projector may be damaged if it tips
over.
■ Do Not Use in the Following Environments
• Locations with excessive humidity, dust, oily smoke or tobacco
smoke
Adhesion to the lens, mirrors or other optical parts may reduce image
quality. In addition, oil can degrade the plastic, which could result in a
ceiling-mounted projector falling from its mounting.
• Near high-voltage power lines or sources of electrical power
This may cause malfunction.
• On soft surfaces such as carpets or cushioned mats
This may cause a fire or damage the projector.
• Locations with excessive temperature or humidity
• Locations subject to vibration or impact
• Near heat or smoke detectors
• Near the ocean, or near air conditioner vents
• Locations where corrosive gases occur, such as sulfur gas from
hot springs
This may damage the projector. Acceptable ranges for operating and
storage temperature and humidity are as follows.
* Operating temperature and humidity applies to when the projector
is projecting or in standby mode.
Operating temperature
0°C (32°F) – 45°C (113°F)
Operating humidity
20% – 85%
21
Storage temperature
-20°C (-4°F) – 60°C (140°F)
Before Installation
Precautions When Carrying / Shipping the
Projector
Before Installation
■ Do Not Touch the Lens with Bare Hands
Do not touch the lens with bare hands. Any smudges or
fingerprints on the lens may affect image quality.
■ Allow a 30 Min. Warm Up before Focus Adjustment (P43),
if Possible
Immediately after startup, the heat of the light source may prevent stable focus.
When adjusting focus, it is also helpful to use the test pattern (10) (P92, P138).
■ Install at a Sufficient Distance from Walls and Other
Obstructions
If the air intake or exhaust
Air intake vent
vent is blocked, heat will
accumulate inside the
projector, possibly resulting
in a shortened projector
lifetime or a malfunction.
Similarly, do not install in
Warmed
narrow, enclosed spaces
airflow
with poor ventilation. Install
Exhaust
vent
in a well-ventilated location.
Ensure a minimum
Air intake vent
clearance of 50 cm (1.6') on
both sides, and behind the projector. Also ensure a minimum
clearance of 2 cm (0.8") below the projector.
■ Be Careful of Condensation
If the temperature of the room rises suddenly, moisture in the air may condense on
the projector lens and mirror, causing the image to become blurred. Wait until the
condensation has evaporated for the image projected to return to normal.
■ At Altitudes above 2,300 m (7,545.8'), Adjust the Settings
Projector settings must be adjusted when using the projector at altitudes of 2,300 m
(7,545.8') or higher. Specifically, refer to instructions for [High altitude] (P133) in the
[Install settings] menu.
22
Before Installation
■ When Using Mounted on the Ceiling
■ Install Facing in the Correct Direction
• Projection is possible upward, downward, or in a variety of
directions, but do not block the air intake and exhaust vents. In
particular, always ensure a minimum clearance of 2 cm (0.8")
from the air intake vent on the bottom of the projector.
• There are no options for installing the projector other than the
ceiling attachment.
23
Before Installation
When the projector is used mounted on
the ceiling or installed in a high
location, it is necessary to periodically
clean the air intake and exhaust vents,
and the area around the air filter. Dust
that accumulates in intake or exhaust
vents may impair ventilation, raising the
temperature inside and posing a risk of
damage or fire. Use a vacuum cleaner
or similar means to remove dust from
the intake vent and exhaust vent.
Before Installation
■ Precautions for Portrait (Upright) Installation
• Do not block the air intake or exhaust vents. In particular,
because there is an air intake vent on the bottom, always ensure
a minimum clearance of 2 cm (0.8") from the bottom.
• Note that no mounting brackets or similar accessories for
portrait installation are available.
■ Light Source
The projector uses laser as a light source. The laser has the following
characteristic.
Factors such as long-term use and environmental changes may
affect image quality. You can counteract changes in brightness
from hours of use or the ambient temperature by performing
[Light source calibration] in [Calibration] (P156).
24
Before Installation
Copyright Notice
Ensure Network Security
Take measures to ensure network security. Note that Canon is not liable in any
way for direct or indirect loss from network security incidents, such as
unauthorized access.
Before use, configure projector, computer, and network security settings
appropriately.
• Set up the projector for connections only within your protected network,
behind a firewall or the like, instead of direct Internet connections.
• When using the projector in a wireless network, also configure the Wi-Fi
security settings.
• Change the Wi-Fi security key on a regular basis.
About Trademarks
• Ethernet is a registered trademark of Xerox Corporation.
• Microsoft and Windows are registered trademarks or trademarks of Microsoft
Corporation in the United States and/or other countries.
• Mac, Mac OS and Macintosh are trademarks of Apple Inc., registered in the
United States and/or other countries.
• HDMI, the HDMI logo and High-Definition Multimedia Interface are
trademarks or registered trademarks of HDMI Licensing, LLC.
• PJLink is a registered trademark of JBMIA and pending trademark in some
countries.
• PJLink is a registered trademark, or an application has been submitted for
trademark, in Japan, the United States and/or other countries or regions.
• AMX is a registered trademark of Harman International Industries, Inc.
• Crestron®, Crestron RoomView®, and Crestron Connected™ are registered
trademarks of Crestron Electronics, Inc.
• Extron and XTP are trademarks or registered trademarks of RGB Systems,
Inc. in the United States and/or other countries.
• HDBaseT™ and the HDBaseT Alliance logo are trademarks of the HDBaseT
Alliance.
• Wi-Fi is a registered trademark of the Wi-Fi Alliance.
• Wi-Fi CERTIFIED, WPA, WPA2, and the Wi-Fi CERTIFIED logo are used in
reference to methods of configuration developed by the Wi-Fi Alliance.
• All other trademarks are the property of their respective owners.
25
Before Installation
Please note that enlarging or reducing the size of an image for commercial
purposes or public presentation may infringe on the legally protected copyright
or the copyright holder of the original material.
Open Source Software
Part of this product includes software licensed under the GNU General Public
License (GPL)
(1) Please access <https://global.canon/en/oss/scd/index.html> to fill the request
form so that you receive an e-mail with the URL to download the source code;
or
(2) Please send us a letter in writing with the following information, so that you
receive the source code via postal mail.
In case you have chosen this (2), WE MAY CHARGE YOU no more than the
cost of performing this distribution.
(i) Your Address (Country/Region, ZIP code, Address, Your name)
[mandatory]
(ii) Your e-mail address (for the purpose of possible communication with us)
[optional]
(iii) Product Name / Application Name [mandatory]
(iv) Version [mandatory]
Please check “Firmware” in the “Information” menu.
- Addressee:
Open Source Promotion Division, Canon Inc.
30-2, Shimomaruko 3-chome, Ohta-ku,Tokyo 146-8501, Japan
- Please see Privacy Notice at Canon Global <https://global.canon/>.
26
Before Use
Included Accessories
Before use, make sure the following items are included in the package.
• Remote control
• Batteries for the remote control
(AAA size x2)
Before Use
(part no.: RS-RC07)
• Power cord
(1.8 m / 5.9')
• Important Information
For Continental
Europe
For the U.S.A.
and Canada
• Warranty Card
27
Before Use
Projector Part Names and Functions
■ Front Side
(1) Power cord connector (P64)
(2) Infrared remote receiver
(P36)
(3) Lens unit (sold separately)
(4) Air intake vent
(8)
(1)
(2)
(3)
(7)
(6)
(5)
(4)
Do not block the air
intake. Doing so may
cause a malfunction.
(5) Side control (P29)
(6) Terminals and connectors
(P32)
(7) Anti-theft lock hole
An anti-theft wire cable (not
included) can be connected.
(8) LED indicators (P30)
■ Rear Side
(9)
(9) Exhaust vent
Do not block the air
exhaust. Doing so may
cause a malfunction.
(10) Infrared remote receiver
(P36)
(11) Air filter frame (P191)
(10)
(4) (11)
■ Bottom Side
(12)
(13)
(4)
28
(12) Adjustable feet (P60)
(13) Security bar
Before Use
■ Side Control
(6)
Before Use
(4)
(3)
(2)
(1)
(5)
(5) Pointer / VOL buttons (P102)
Up, down, left, or right in menu
navigation or other operations.
Adjusts the sound volume.
[ ] VOL+ button: Increases the
volume.
[ ] VOL– button: Decreases the
volume.
(1) POWER button (P41, P46)
Turns the projector on or off.
(2) INPUT button (P42)
Switches the input signal.
(3) LENS button
Each time the button is pressed,
the screen changes to focus
adjustment (P43), zoom (image
size) adjustment (P43), or lens shift
(image position) adjustment (P56).
To adjust, use the [ ] / [ ] or the
[ ] / [ ] buttons.
(6) OK button (P102)
Determines the item selected from
the menu.
(4) MENU button (P104)
Displays a menu on the screen.
29
Before Use
■ LED Indicators
The projector status is shown by the LED indicators (off / lit / flashing).
• POWER (green)
: Illuminated during projection.
Otherwise, flashes in the following
situations.
• As the projector transitions from standby
to projection
• While the light source is off in power
management mode
• STANDBY (red)
: Illuminated during standby mode.
Otherwise, flashes in the following
situations.
• As the projector transitions from
projection to standby
• While the light source is off in power
management mode
• WARNING (red)
: Lights up or flashes when an error occurs.
• LIGHT (orange)
: Lights up or flashes when a problem
occurs with the light source.
• TEMP (red)
: Lights up or flashes when the internal
temperature is high.
30
Before Use
LED Indicator Displays
The LED indicators flash or illuminate to indicate the operating status of the
projector.
: Off
: Lit
: Flashing
Operating status
Projector not plugged in.
In standby mode.
Power is on. (Projecting.)
Resuming operation (projection) after
standby.
Cooling down while entering standby or
power management mode from power
on.
In power management mode, with the
light source off. (Flashes green and
then red.)
Internal temperature is high (in standby
mode).
Internal temperature is high (during
projection).
An error has occurred with the light
source unit.
A temperature error has occurred.
Flashes 3 times: Air filter error
Flashes 4 times: Fan error
Flashes 5 times: Power error
Flashes 6 times: Lens unit error
31
Before Use
Legend: Example of when the POWER indicator is on;
LED indicator
TEMP
POWER STANDBY WARNING LIGHT
(red)
(orange)
(red)
(green)
(red)
Before Use
■ Terminals and Connectors
(1)
(2)
(3)
(4)
(5) (6) (7)
(8)
(1) USB port (P157)
Connects a USB flash drive. Used for firmware updates.
(2) LAN / HDBaseT port (P63, P65)
Receives HDBaseT input including digital video and audio signals.
Carries both video and audio signals across a single LAN cable (shielded
twisted pair).
This port can also be used to connect the projector to a network.
(3) HDMI terminal (HDMI-1, HDMI-2) (P62)
Receives HDMI input including digital video and audio signals.
Carries both video and audio signals across a single cable.
(4) DisplayPort port (DisplayPort-1, DisplayPort-2) (P62)
Receives DisplayPort input including digital video and audio signals.
Carries both video and audio signals across a single cable.
(5) AUDIO OUT terminal (AUDIO OUT) (P64)
Outputs the audio to external AV equipment. This outputs the audio signal that
corresponds to the projected image signal.
(6) Trigger terminal (TRIGGER) (P156)
Used to trigger operation of a screen or other external device when the
projector is turned on or off.
(7) Terminal for wired remote control (REMOTE) (P37)
This terminal is used to connect the optional remote control (RS-RC05) using a
cable.
(8) Service port (P203)
Used to control the projector with user commands (P203 – P204).
32
Before Use
Remote Control
■ Part Names and Functions
(1)
(2)
(7) ZOOM button (P43)
Adjusts the image size.
[ ] / [ ] buttons:
Increase the image size.
[ ] / [ ] buttons:
Decrease the image size.
(3)
(4)
(5)
(8) INPUT A-C button (P145)
Can be assigned to input signal selection
(one source for each of the three buttons).
(6)
(7)
(9) ASPECT button (P81, P113)
Changes the aspect ratio of the
projected image.
(8)
(9)
(10)
(11)
(10) TEST PATTERN button (P138)
Displays the test pattern.
(11) Ch button (P145)
Changes the remote control channel.
(12)
(13)
(12) IMAGE button (P44)
Switches the image mode (image
quality).
(13) FREEZE button (P47)
Freezes the projected image.
(1) POWER button (P41, P46)
Turns the projector on or off.
(2) D.ZOOM button
Not used with this product.
(3) Fn button
Not used with this product.
(4) Pointer buttons (P102)
Selects the upper, lower, left or right
item in the menu. Also used to assign a
channel to the remote control.
(5) OK button (P102)
Determines the item selected from the
menu.
33
Before Use
(6) FOCUS button (P43)
Adjusts focusing.
[ ] / [ ] buttons:
Moves the focus position further away.
[ ] / [ ] buttons:
Moves the focus position nearer.
Before Use
(19) EXIT button (P103)
Cancels functions such as menu
display or test pattern during operation
and returns to the image display.
(14)
(20) LENS-SHIFT button (P56)
Moves the lens up, down, left, or right.
[ ] / [ ] / [ ] / [ ] buttons:
Moves the image.
(15)
(16)
(17)
(21) KEYSTONE button (P81)
Corrects keystone distortion.
The [Keystone] setting enables both
horizontal/vertical keystone correction
(by adjusting top/bottom/left/right
length) and corner correction.
(18)
(19)
(22) AUTO PC button
Not used with this product.
(20)
(23) SPLIT button
Not used with this product.
(21)
(24) BLANK button (P47)
Temporarily blacks out the image.
(22)
(23)
(24)
(14) INPUT button (P42)
Switches the input signal.
(15) VOL button (P49)
Adjusts the sound volume.
[3] button: Increases the volume.
[6] button: Decreases the volume.
(16) Number buttons (P150, P159,
P161)
Enter password and TCP/IP setting
values.
(17) MUTE button (P49)
Mutes the sound.
(18) MENU button (P104)
Displays a menu on the screen.
34
Before Use
■ Installing Remote Control Batteries
1
2
Insert batteries.
3
Insert 2 new AAA
batteries in the
compartment with the +
and – terminals
positioned correctly.
Close the
compartment lid.
Slide the lid until you
hear a click to securely
close it.
• If buttons on the remote control are inoperative when you attempt to operate the
projector, replace the batteries with new ones.
• Do not drop the remote control or subject it to impact.
• Do not spill any liquids on the remote control. Doing so may cause a malfunction.
Pay attention to the following points when handling the batteries.
Failing to do so could result in a fire or personal injury.
• Do not heat, short circuit or disassemble the batteries, or place
them in a fire.
• Do not attempt to recharge the batteries that are included with the
remote control.
• Remove the batteries when they are flat or when the remote
control will not be used for a long period of time.
• When replacing the batteries, replace both at the same time. Also,
do not use two batteries of a different type at the same time.
• Insert the batteries with the + and – terminals in the correct
directions.
• If any liquid from inside the batteries leaks out and contacts your
skin, be sure to wash the liquid off thoroughly.
35
Before Use
Open the battery
compartment lid.
Slide the lid while
pressing it down.
Before Use
■ Remote Control Operating Range
The remote control is an infrared type. Point it at the infrared remote receiver on the
front or rear of the projector to operate it.
25°
8 m (26.3')
25°
8 m (26.3')
25°
25°
• Use the remote control no further than approximately 8 m (26.3') from the projector.
• Use the remote control within an angle of 25° in any direction from directly in front of the
infrared remote receiver.
• The remote control may be inoperative if there is an obstacle between the remote
control and the projector or the infrared remote receiver on the projector is exposed to
direct sunlight or strong light of lighting equipment.
• When you use 2 or more projectors at the same time, change the channel settings to
prevent the 2 remote controls from interfering with each other (P145).
36
Before Use
■ Using an Optional Wired Remote (RS-RC05)
To use a wired remote control with the projector, use the RS-RC05, sold separately.
Use a cable with a ø3.5 mm stereo mini jack (not included).
Terminal for wired
remote control
ø3.5 mm stereo mini jack cable
(not included)
• Infrared operations cannot be performed if a cable is connected to the projector or the
remote control.
• Use a cable with a ø3.5 mm stereo mini jack (not included) with a length of 30 m (98.4')
or less.
37
Before Use
Remote control
(RS-RC05)
Basic Guide
38
Projection Procedure
The steps to prepare for projection are as follows.
Connect Other Equipment
(P40)
Configure the computer’s network settings (P68)
Turn the Projector On
(P41)
Step 3
Select an Input Signal
(P42)
Step 4
Adjust the Image
(P43)
Step 5
Select the Image Quality (Image Mode)
(P44)
Turn the Projector Off
(P46)
39
Projection Procedure
Step 2
Basic Guide
Step 1
Projection Procedure
Step 1 Connect Other Equipment
HDMI input
40
Projection Procedure
Step 2 Turn the Projector On
Press the POWER button.
Remote control
Projector
Turn on the computer or other equipment.
• If a window is projected for menu language selection, use the pointer buttons to choose
a language, and then press the OK button.
• If you have set a password, the password input screen appears. Enter your password
(P150, P151).
• When “No signal” appears, press the INPUT button to select the input signal.
• If a computer screen is not projected, adjust the display settings on the computer. For
details about how to switch display output, refer to the manual for your computer.
41
Projection Procedure
2
Basic Guide
1
Projection Procedure
Step 3 Select an Input Signal
To switch between signals from connected devices, select an input signal in the
[Input] menu.
The selected signal changes each time you press the INPUT button, or each time
you press the [ ] / [ ] buttons when the [Input] window is shown.
The currently active input signal is marked with a green circle and enclosed by a
orange border.
Names of input signals available for projection are displayed in white, and
unavailable signal names are grayed out.
Remote control
Projector
INPUT button
INPUT button
• Input signals can also be selected by using the INPUT A-C buttons on the remote
control, depending on settings. For details, see “[INPUT A-C] button settings” (P145).
• Using the projector’s multi-input feature, you can supply a single image via two cables.
As sources of input for projection at 4K or other resolutions, choose [DP 1x2].
• Signals you supply for Multi Input mode must meet certain conditions.
42
Projection Procedure
Step 4 Adjust the Image
The projector’s maximum resolution is 4096x2160 (P193).
For details on adjusting your computer’s output resolution, refer to the manual for
your computer.
Basic Guide
■ Adjusting the Computer’s Output Resolution
■ Focusing / Resizing the Image
Projector
Remote control
LENS button
FOCUS button
ZOOM button
Focus adjustment
Zoom adjustment
• Correct any keystone distortion by pressing the KEYSTONE button (P81).
• Select an image mode depending on the projected image.
43
Projection Procedure
Press the ZOOM button on the remote control to adjust the image size, and press
the FOCUS button to adjust the focus. You can also press the LENS button on the
projector once to adjust focus and twice to adjust image size.
Projection Procedure
Step 5 Select the Image Quality (Image Mode)
Pressing the IMAGE button on the remote control, you can select an image mode
to suit the projected image.
In each image mode, you can further adjust the brightness, contrast, sharpness,
gamma, HDR range, color adjustment, advanced adjustment, light source mode
(P125) and brightness level (P125).
Remote control
■ Image Modes
Details
Image mode
(1) Ambient Brightness
(2) Types of Images
(3) Effect on Projection
Standard
(1) Bright
(2) Computer screens, or media played with video software
(3) Whites and natural colors
Presentation
(1) Bright
(2) Images mainly consisting of text
(3) Keeps the screen bright
Dynamic
(1) Bright
(2) Media played with video software
(3) Keeps the screen bright
Video
(1) Somewhat dark
(2) Video from camcorders
(3) Close to the color space of TVs
Photo/sRGB
(1) Somewhat dark
(2) Digital photos from sRGB-compatible cameras
(3) Conforms to the sRGB standard
DICOM SIM
(1) Somewhat dark
(2) Monochrome images (medical use, for example)
(3) Adjusted to the GSDF curve specified in DICOM Standard Part 14
User 1 – 5
Up to 5 user-selected combinations of image quality settings can be
stored in the memory (P118). Stored settings can be selected as an
image mode.
44
Projection Procedure
■ Projecting an Image in the DICOM SIM Mode
• It is recommended to check the tone everytime when using this
projector since it does not have the tone correction and
calibration functions against the secular change.
• It may take approximately 30 minutes until the projection
brightness of this projector becomes stabled.
Switching the mode to the DICOM SIM Mode
1
Press the IMAGE button on the remote control until [DICOM SIM] is
displayed or select [DICOM SIM] from [Image mode] in the [Image
adjustment] menu.
2
Display test patterns by pressing the TEST PATTERN button on the
remote control or selecting [On] in [Test pattern] of the [Install settings]
menu. Press the [ ] / [ ] buttons to select the DICOM test pattern.
45
Projection Procedure
This projector is not the display monitor for a medical image. It cannot be used for
the radiological image reading or medical examination.
Basic Guide
In the DICOM simulation mode (hereinafter referred to as “DICOM SIM”), this
projector can project a monochrome medical image such as an X ray radiography,
CT image, MRI image, etc. in the tone similar to the DICOM (Digital Imaging and
Communications in Medicine) standard. Typically, to project the image according to
the DICOM standard, it requires the grayscale tone correction using a luminance
meter according to the environment. In this projector, there are 21 types of tone
settings for various ambient lights. You can correct the tone in a simplified manner
by selecting the DICOM test pattern (P92).
It is suited to project an image in a medical lecture, academic conference, inhospital conference, etc.
Projection Procedure
3
As you view the test pattern, perform [Gamma] (P119) adjustment from
the [Image adjustment] menu until the image is optimal.
4
Press the OK button after the setting.
Perform one of the followings to obtain an appropriate projection:
• Darken the ambient light
• Reduce the image size
• Reduce the projection distance
Turn the Projector Off
1
Press the POWER button.
Remote control
2
Projector
When this window is displayed,
press the POWER button again.
After you turn the projector off,
projection stops, the [STANDBY]
indicator flashes in red, and the
projector starts cooling down. After
cooling down, the projector enters
standby mode. In standby mode,
the [STANDBY] indicator remains lit
instead of flashing.
• If you want to continue projecting without turning off the power, press a button other
than POWER, or else wait until the confirmation message disappears.
• The projector cannot be turned on while cooling down.
• Using the projector for extended periods may shorten the life of the internal optical
components.
• Unplug the projector if it will not be used for an extended period. Note that the [Date
and time] setting will be reset, so you will need to set it again.
• In power management mode, the projector may go off automatically after some time
(P148).
46
Convenient Projection Features
Convenient Features
This section describes convenient features during presentations and in other
situations.
Projection can be temporarily blanked after a presentation, or to divert the
audience’s attention away from the screen.
Remote control
• You can set the screen state while blacking out the image in the menu
(P140).
Freezing the Picture
Projection can be temporarily frozen during computer operations that would be
distracting, or to pause playback of video or animation.
Remote control
Press the FREEZE button on the remote control to freeze the
moving image. The following icon appears.
Press the FREEZE button again to return to the original display.
Screen
• It is also cancelled when the input signal is terminated.
47
Convenient Projection Features
Press the BLANK button on the remote control to black out the
image.
Press the BLANK button again to show the image.
Basic Guide
Temporarily Blacking Out an Image
Convenient Projection Features
Projecting a Test Pattern from the Menu
Even without any input signals, the projector can project a test pattern. Test
patterns can be projected during installation to check how the projector is installed.
For details on projecting test patterns, see “Test pattern” (P138) or “Adjustment
Using a Test Pattern” (P92).
Specifying Power-Saving Settings
Set power-saving settings as needed.
The following four settings are available. For details, refer to the page describing
each function.
• Light source mode (P125)
Conserve energy by selecting a mode that is less bright.
• Standby power settings (P147)
Conserves energy in standby mode by disabling some network functions.
• Power management mode (P148)
Automatically turns off the light source or the power after a certain period if the
projector is idle without an input signal.
• Power management duration (P148)
Specify the period after which the light source or projector should go off
automatically if left idle without an input signal when [Power management mode]
is set to [Light source off] or [Standby].
48
Convenient Projection Features
Adjusting the Volume
Useful when:
• You want to adjust the volume level of external speakers connected via the audio
output terminal.
Press the VOL button. The following screen appears.
Muting the Sound
Useful when:
• You want to temporarily mute unnecessary sound.
• You want to immediately mute the sound.
Remote control
Press the MUTE button on the remote control to mute the sound.
The following icon appears.
Screen
Press the MUTE button again to cancel the mute function.
• You can also mute the sound of the speakers connected via the audio output terminal.
49
Convenient Projection Features
• You can also adjust the volume level with the [ ] / [ ] buttons of the
projector.
• Adjust the volume or mute setting on the computer if the volume level is too
low.
Basic Guide
Remote control
Installation Guide
Before setting up the projector, be sure to read “Before Installation” (P21).
50
Installation Procedure
Relationship Between Projecting Distance and
Image Size
Lower edge
of image
H
Screen size
(diagonal)
L
Width
RS-SL01ST
RS-SL02LZ
RS-SL04UL
RS-SL05WZ
Projection ratio*
1.38 – 2.07:1 2.03 – 3.46:1 3.29 – 6.43:1 0.93 – 1.39:1
Image size
Projection distance L [m (feet)]
[cm]
Diagonal
Wide Tele Wide Tele Wide Tele Wide Tele
Width Height
limit limit limit limit limit limit limit limit
1.23
1.85
1.80
3.08
0.83
1.23
40
90
47
—
—
(4.04) (6.07) (5.91) (10.10)
(2.72) (4.04)
1.85
2.79
2.72
4.65
4.48
8.71
1.25
1.86
60
135
71
(6.07) (9.15) (8.92) (15.26) (14.70) (28.58) (4.10) (6.10)
2.47
3.72
3.64
6.21
5.94 11.57 1.66
2.49
80
180
95
(8.10) (12.20) (11.94) (20.37) (19.49) (37.96) (5.45) (8.17)
3.10
4.65
4.56
7.77
7.39 14.44 2.08
3.12
100
225
118
(10.17) (15.26) (14.96) (25.49) (24.25) (47.38) (6.82) (10.24)
4.65
6.99
6.86 11.68 11.02 21.59 3.12
4.69
150
337
178
(15.26) (22.93) (22.51) (38.32) (36.15) (70.83) (10.24) (15.39)
6.21
9.32
9.16 15.59 14.65 28.75 4.16
6.27
200
449
237
(20.37) (30.58) (30.05) (51.15) (48.06) (94.32) (13.65) (20.57)
7.76 11.65 11.46 19.49 18.28 35.90 5.20
7.84
250
562
296
(25.46) (38.22) (37.60) (63.94) (59.97) (117.78) (17.06) (25.72)
9.32 13.99 13.76 23.40 21.91 43.05 6.24
9.41
300
674
355
(30.58) (45.90) (45.14) (76.77) (71.88) (141.24) (20.47) (30.87)
10.88 16.32 16.06 27.31 25.54 50.21 7.28 10.99
350
786
415
(35.70) (53.54) (52.69) (89.60) (83.79) (164.73) (23.88) (36.06)
12.43 18.65 18.36 31.21 29.17 57.36 8.32 12.56
400
899
474
(40.78) (61.19) (60.24) (102.40) (95.70) (188.19) (27.30) (41.21)
13.99 20.99 20.66 35.12 32.80 64.52 9.36 14.13
450
1011
533
(45.90) (68.86) (67.78) (115.22) (107.61) (211.68) (30.71) (46.36)
15.54 23.32 22.96 39.03 36.43 71.67 10.40 15.71
500
1123
592
(50.98) (76.51) (75.33) (128.05) (119.52) (235.14) (34.12) (51.54)
17.10 25.65 25.26 42.94 40.06 78.83 11.44 17.28
550
1236
652
(56.10) (84.15) (82.87) (140.88) (131.43) (258.63) (37.53) (56.69)
18.65 27.99 27.56 46.84 43.69 85.98 12.48 18.85
600
1348
711
(61.19) (91.83) (90.42) (153.67) (143.34) (282.09) (40.94) (61.84)
51
Height H**
[cm]
RS-SL01ST
RS-SL02LZ
RS-SL04UL
RS-SL05WZ
-34 – 5
-51 – 7
-68 – 9
-85 – 12
-128 – 18
-171 – 24
-213 – 30
-256 – 36
-299 – 41
-341 – 47
-384 – 53
-427 – 59
-469 – 65
-512 – 71
Installation Procedure
Lens unit
Screen
L: Projection distance
H: Height from center of lens to lower edge of
image
Installation Guide
Height
The projected image size is determined by the distance between the projector and
screen (projection distance) and the zoom position. Refer to the following table and
decide the distance between the projector and screen.
Installation Procedure
Lens unit
RS-SL03WF RS-SL06UW
RS-SL07RST
Height H** [cm]
Projection ratio*
0.74:1
0.5:1
1.34 – 2.35:1
Image size
RS-SL03WF RS-SL06UW RS-SL07RST
Projection distance L [m (feet)]
[cm]
Diagonal
Width Height Fixed
Fixed Wide limit Tele limit
0.67
(2.20)
1.00
(3.28)
1.34
(4.40)
1.67
(5.48)
2.50
(8.20)
3.33
(10.93)
4.16
(13.65)
4.99
(16.37)
0.45
(1.48)
0.67
(2.20)
0.90
(2.95)
1.12
(3.67)
1.69
(5.54)
2.25
(7.38)
2.81
(9.22)
3.38
(11.09)
415
—
—
899
474
—
—
450
1011
533
—
—
500
1123
592
—
—
550
1236
652
—
—
600
1348
711
—
—
40
90
47
60
135
71
80
180
95
100
225
118
150
337
178
200
449
237
250
562
296
300
674
355
350
786
400
1.20
2.11
(3.94)
(6.92)
1.80
3.17
(5.91)
(10.4)
2.40
4.23
(7.87) (13.88)
3.00
5.29
(9.84) (17.36)
4.50
7.93
(14.76) (26.02)
6.01
10.57
(19.72) (34.68)
7.51
13.21
(24.64) (43.34)
9.01
15.86
(29.56) (52.03)
10.51
18.50
(34.48) (60.70)
12.01
21.14
(39.4) (69.36)
13.51
23.78
(44.32) (78.02)
15.01
26.43
(49.25) (86.71)
16.52
29.07
(54.20) (95.37)
18.02
31.71
(59.12) (104.04)
-27 – -20
-34 – 16
-58 – 11
-41 – -31
-51 – 23
-87 – 16
-54 – -41
-68 – 31
-117 – 22
-68 – -51
-85 – 39
-146 – 27
-101 – -76 -128 – 59
-219 – 41
-135 – -102 -171 – 78
-291 – 55
-169 – -127 -213 – 98
-364 – 68
-203 – -153 -256 – 117 -437 – 82
—
—
-510 – 95
—
—
-583 – 109
—
—
-656 – 123
—
—
-729 – 136
—
—
-802 – 150
—
—
-874 – 164
* Projection ratios are based on projection to 100-inch screens.
** Height (H) is based on [Normal] lens shift mode.
For details on the image position in [Expanded] mode, see “Adjustment Using
Lens Shift” (P58).
52
Installation Procedure
Installing / Removing the Lens Unit
• When installing and removing the lens unit, be sure not to touch the
surface of the lens with your hands or scratch it.
• Do not apply force to parts (e.g. lead wires) that are connected to the
lens unit or lens motor. Doing so may cause a malfunction.
• Do not replace the lens unit in a dusty location. If any dust or dirt
enters the projector, this may adversely affect picture quality.
• When carrying or holding up the projector after attaching the lens
unit, be sure not to hold the lens. Doing so may cause damage to the
lens unit or projector.
• If transportation is necessary, the lens unit should be removed
before transporting the projector. If the projector is subjected to
excessive impacts during transportation, the lens unit or projector
may be damaged.
• For details about which devices the projector is compatible with,
contact the Canon Customer Support Center.
53
Installation Procedure
• The projector is provided with a lens shift function to move the lens
up, down, left, and right using the motor. Do not touch the lens while
it is moving. Touching the lens when it is moving may result in
personal injury.
• Before replacing the lens unit, wait at least 30 minutes after the
projector is turned off to allow the lens unit to cool down. Failure to
do so may result in burns or injury.
Installation Guide
• Before installing or removing the lens unit, be sure to disconnect the
power plug or connector. Failure to do so may result in fire, electric
shock, or injury.
• When hanging the projector from a ceiling, put the projector down
on the floor or a workbench before attaching or replacing the lens
unit. Failure to do so could result in parts falling off the projector and
may cause a malfunction or personal injury.
Installation Procedure
■ Installing the Lens Unit
1
After confirming that the lens lever is raised, hold the lens unit with the
lens connector on the left side and insert it in the projector, keeping the
lens connector aligned with the connector in the projector.
Lens lever
Connector
Lens connector
Keep the lens unit level as you insert it straight into the projector. Inserting it crooked may
prevent the lens lever from moving freely or make projection blurry.
2
Turn the lens lever
clockwise to secure the
lens unit.
Lens lever
• When securing the lens unit, make sure it is fully inserted in the projector, and then turn
the lens lever clockwise (toward the bottom, as shown) to secure it. If it is not fully
inserted, this may prevent the lens lever from moving freely or make projection blurry.
• The projector stores certain information about lenses. This information must be set
again when lenses are replaced.
After lens replacement, lens shift reset is performed automatically when the projector is
restarted, and the lens moves within the range of [Normal] lens shift mode (P58).
• Also refer to instructions included with the replacement lens.
54
Installation Procedure
Removing the Lens Unit
1
Raise the lens lever by
turning it
counterclockwise.
2
Hold the lens unit securely as you
remove it.
Lens lever
Installation Procedure
55
Installation Guide
When removing the lens unit, keep it level
as you pull it straight out of the projector.
Installation Procedure
Installation
Place the projector in front of the screen.
• To avoid keystone distortion, install the
projector so that it is at right angles to the
screen.
• The screen must not be exposed to direct
sunlight or light from lighting equipment. In
a bright room, it is recommended that
lights be turned off, curtains be drawn, and
other steps taken to make the screen
easier to see.
Screen
Optical axis
■ Tabletop or Floor Installation (Lower Than the Screen)
To adjust the projection position, use the lens shift function or the adjustable feet.
1
Press the LENS-SHIFT button on the remote control to display the lens
shift adjustment window.
Remote control
56
Installation Procedure
Press the LENS button on the projector repeatedly to switch between windows
for parameters adjusted by controlling the lens.
To access the lens shift adjustment window, press the LENS button three times
(or four times if you have set [Marginal focus] to [On]).
Projector
When [Marginal focus]
is set to [On].
2
Press the pointer buttons to adjust.
To raise or lower the image, use the [ ] / [ ] buttons on the remote control or
projector.
To move the image left or right, use the [ ] / [ ] buttons on the remote control
or projector.
To continue moving the image in a specific direction, hold down the
corresponding button.
Remote control
Projector
Screen
57
Installation Procedure
When [Marginal
focus] is set to [Off].
Installation Guide
Press three times.
Installation Procedure
Adjustment Using Lens Shift
You can reposition the image in all directions by shifting the lens up, down, left, or
right. This feature is referred to as lens shift. The projector’s lens shift range is as
follows.
Amount movable in
up/down direction
(1)
90°
90°
(2)
At maximum downward lens shift
At maximum upward lens shift
Amount movable in
left/right direction
90°
90°
(3)
(3)
At maximum leftward lens shift
At maximum rightward lens shift
Amount of Lens Shift for Each Replacement Lens
Lens unit
RS-SL01ST
RS-SL02LZ
RS-SL04UL
RS-SL05WZ
Lens shift mode: Normal
Up (1)
: +60%
Down (2)
: -22%
Left/right (3) : ±6%
RS-SL03WF
Up (1)
: +7%
Down (2)
: -7%
Left/right (3) : ±2%
RS-SL06UW
Up (1)
: +83%
Down (2)
: -22%
Left/right (3) : ±25%
RS-SL07RST
Lens shift mode: Expanded*
Up (1)
: +104%
Down (2)
: -104%
Left/right (3) : ±25%
Up (1)
: +73%
Down (2)
: -73%
Left/right (3) : ±11%
* Image quality may decrease in [Expanded] lens shift mode, depending on the
extent of lens shift.
Before using this feature, connect the projector to a computer or AV equipment (P62) and
plug the projector in (P64).
58
Installation Procedure
Area Outside the Lens Shift Range (in [Normal] Lens Shift Mode*)
• Zoom Lenses: RS-SL01ST/RS-SL02LZ/RS-SL04UL/RS-SL05WZ
When the shift exceeds 49% (*1) in the upward direction, the amount of available
shift in the left/right directions decreases. When the lens is shifted upward to the
maximum of 60% (*2) (1), the lens cannot be shifted left or right.
For an ultra-wide zoom lens (RS-SL06UW), (*1) is 32% and (*2) is 83%.
Projected image
Shift range
(2)
(3)
• Short Fixed Lens: RS-SL03WF
The more you shift the lens up or down, the less you can shift it left or right. When
the lens is shifted upward or downward to the maximum of 7%, the lens cannot be
shifted left or right.
(3)
(3)
Area where shift is not
possible
(1)
Projected image
Shift range
(2)
• Standard 4K Zoom Lens: RS-SL07RST
When the shift exceeds 55%/-55% in the upward or downward direction, the
amount of available shift in the left/right directions decreases. When the lens is
shifted upward or downward to the maximum of 73%/-73% (1), the lens cannot be
shifted left or right.
Area where shift is not
possible
(1)
Projected
image
Shift range
(2)
(3)
(3)
In [Expanded] lens shift mode, the lens can be shifted to each corner position, however
image quality may decrease.
59
Installation Procedure
(3)
Installation Guide
Area where shift is not
possible
(1)
Installation Procedure
Resetting the Position
During screen position adjustment, press
and hold the LENS-SHIFT button on the
remote control or the LENS button on the
projector to display the [Lens shift reset]
window. The selections for the lens
currently used are displayed. Use the
pointer buttons to select one of them, then
press the OK button.
Lens unit type
Available items
RS-SL01ST
RS-SL02LZ
RS-SL04UL
RS-SL05WZ
50% : Up 50%, left/right 0%
0% : Up/down/left/right 0%
RS-SL06UW
RS-SL07RST
RS-SL03WF
0% : Up/down/left/right 0%
• After resetting, the lens may be slightly misaligned from your selected position.
• For precise positioning, use the lens shift function to fine-tune the position.
Adjustment Using the Adjustable Feet
Adjustment in a range of ±1.8° is possible using
the adjustable feet.
Adjustable feet
60
Installation Procedure
■ High Installation, Ceiling Mounting, and Rear Projection
Projector features enable projection from a shelf or other high surface. You can also
mount the projector on the ceiling (ceiling mounting) with it turned upside down or
place it behind the screen (rear projection) if you use a translucent screen.
In [Image flip H/V] (P128) in the menu, choose a method of projection that
corresponds to how the projector is installed.
Installation Guide
Ceiling mounting
Rear projection
1
Press the MENU button on the remote control or projector, and then
select [Install settings] > [Image flip H/V].
2
Select the orientation of how the projector is installed.
Option
Function
None
Select for normal projection, without inversion.
Ceiling mounted
Select when the projector is installed upside-down on the ceiling.
The projected image is inverted in both vertical and horizontal
directions.
Rear
Select this to project an image from behind the screen.
The projected image is inverted in the horizontal direction.
Rear, Ceiling mounted
Select this to project an image from behind the screen with the
projector hung from the ceiling.
The projected image is inverted in the vertical direction.
When setting the projector on a high surface for projection, be sure
the surface is flat and stable. Failure to do so poses a risk of the
projector falling and causing accidents or injury.
Ceiling mounting requires an optional ceiling attachment (part no.: RS-CL15) and
ceiling-mount arm (part no.: RS-CL17). Depending on the installation environment,
an extension pipe (part no.: RS-CL08 or RS-CL09) may also be required. Contact
the Canon Customer Support Center for more detailed information.
• Make sure to use the optional ceiling attachment.
• You should never install the ceiling attachment by yourself.
61
Installation Procedure
Installation on high surfaces
Connection Procedure
Connecting Other Equipment
Before connecting the projector to other equipment, turn off both the projector
and the other equipment.
■ HDMI Connections
HDMI cable (not included)
Computer
AV
equipment
HDMI terminal
■ DisplayPort Connections
DisplayPort cable
(not included)
Computer
DisplayPort port
62
AV
equipment
Connection Procedure
■ LAN / HDBaseT Connections
HDBaseT
transmitter
Installation Guide
LAN cable
(CAT5e or better; shielded;
not included)
HDMI cable
(not included)
AV
equipment
HDMI terminal
Notes on HDBaseT
• Use a shielded cable rated at CAT5e or better.
• Maximum transmission distance is 70 m (229.7') (maximum distance for 2K signals:
100 m (328.1')).
• However, maximum transmission distance may be shorter in some environments.
• Do not use the LAN cable when it is coiled or bundled.
• Inserting or removing the LAN cable during projection may cause noise.
• Connectivity with all HDBaseT transmitters on the market is not guaranteed.
• Some HDBaseT transmitters may not enable correct projection when used to connect
source equipment to the projector.
63
Connection Procedure
Computer
Connection Procedure
■ Audio Output Connections
Audio cable (not included)
Computer
AV
equipment
Amplified
speakers
RCA terminal
■ Plugging the Projector In
Connect the power cord to the projector and plug it in.
Insert the power plug and connector securely up to the base.
• Unplug the power cord if the projector will not be used for a long period of time.
• [Date and time settings] may be reset if the power cord is left unplugged for a long
period of time (P151).
64
Connection Procedure
Connecting to a Network
■ Network Connection Overview
Connecting the projector to a network enables you to control the projector from a
computer and receive notification of projector errors via email.
Depending on the method of network connection, preparation on the computer side
may be necessary.
■ Connection Methods
Wired Networks
Use a LAN cable to connect the projector and computer to the network. Connect
the LAN cable to the projector’s LAN / HDBaseT port to enable communication.
LAN cable (shielded; not included)
LAN cable (CAT5e
or better; shielded;
not included)
HDBaseT
transmitter
65
LAN / HDBaseT
port
LAN cable (CAT5e
or better; shielded;
not included)
LAN / HDBaseT
port
Connection Procedure
Hub or router, etc.
Installation Guide
The projector can be connected to a wired network with a LAN cable or to a
wireless network via Wi-Fi.
Connection Procedure
Wireless Networks
• Projector Access Point (PJ AP) Mode
The projector can be used as an access point for direct communication with
wireless LAN-compatible computers.
Up to five computers can be connected at once.
Projector (in PJ AP mode)
Wireless LAN-compatible
computers
The following network features are available in PJ AP mode.
• Web features
• User commands
• SNMP features
Other network features (PJLink, Mail, AMX Device Discovery and Crestron RoomView) are not
available.
• Infrastructure Mode
The projector can also be used as a wireless LAN client for connections to a
wireless LAN access point.
In this case, the projector is connected to computers via the wireless LAN access
point.
Wireless
LAN-compatible
computers
Projector
(in infrastructure mode)
Access point
Computers
connected to the
network via LAN
cable
66
Connection Procedure
Network connection
• The following network features are available in infrastructure mode.
- Web features
- Mail features
- User commands
- SNMP features
Other network features (PJLink, AMX Device Discovery and Crestron
RoomView) are not available.
• The LAN / HDBaseT port provides a maximum transfer rate of 100 Mbps.
• Referring to “Checking Projector Information” (P173), confirm that the projector’s
IP address is not the same as that of other computers on the network. To set a
projector IP address, follow the instructions in “Basic Wired Network Settings
[Wired]” (P180) or “Basic Wireless Network Settings [Wireless]” (P182) and use
the web screen, or use the projector’s “Detailed settings (wired)” (P161) or
“Detailed settings (wireless)” (P165).
• In a network environment where a DHCP server is operating, select [On] in
[DHCP] on the projector to enable the DHCP function and connect it (P161,
P167).
•
•
•
•
Wired LAN features and infrastructure mode cannot be used at the same time.
PJ AP and infrastructure modes cannot be used at the same time.
Wired LAN and PJ AP mode cannot be used in the same subnetwork.
When you connect the computer to the network for the first time, it is also necessary to
perform settings on the computer. In this case, consult the network administrator
regarding the necessary settings.
67
Connection Procedure
• Remember to set your preferred network (wired or wireless) to [On] if [Network
(wired/wireless)] on the projector is set to [Off/Off] and the network connection is
disabled (P160). For wireless networks, choose the type of connection.
Installation Guide
• The following restrictions apply in infrastructure mode.
- Access point SSIDs not in ASCII code (single-byte letters, numbers, or
symbols) may cause character corruption in search result display.
- Connectivity cannot be assured if access point SSIDs include characters not in
ASCII code (single-byte letters, numbers, or symbols).
When multiple access points have the same SSID, only search results for the
access point with the strongest signal are shown.
Connection Procedure
■ Configuring the Computer’s Network Settings
Instructions for setting a computer’s IP address (for wired connections or wireless
connections) are as follows for each operating system.
Windows 10
1
2
Click the Start button (Windows logo) in the lower left of the screen.
3
Click [View network status and tasks].
• In icon view:
From [Windows system tools] on the Start menu that is displayed, click
[Control Panel].
• On some versions of Windows 10, you must first click [All Apps] in order to
display [Windows system tools].
Click [Network and Sharing Center].
4
5
Click [Change adapter settings].
6
In the [This connection uses the following items] list, select [Internet
Protocol Version 4 (TCP/IPv4)] and click the [Properties] button. Make a
note of the original network settings (IP address, subnet mask, default
gateway, etc).
7
Select [Use the following IP address] and set the IP address and subnet
mask.
The projector’s own default IP address is “192.168.254.254” for wired
connections and “192.168.253.254” for wireless connections. Specify a
different IP address.
8
When the settings are completed, click the [OK] button, and then click the
[Close] button in the [Ethernet Properties] window to close it.
For a wired connection, right-click [Ethernet], or for a wireless
connection, right-click [Wi-Fi]. Next, click [Properties].
68
Connection Procedure
Windows 8.1
1
2
Click the down arrow in the lower left of the start screen.
Click [Control Panel].
• From the desktop screen:
Press Win+X.
In the shortcut menu displayed in the lower left, click [Control Panel].
3
Click [View network status and tasks].
• In icon view:
Click [Network and Sharing Center].
6
Select [Internet Protocol Version 4 (TCP/IPv4)] and click the [Properties]
button. Make a note of the original network settings (IP address, subnet
mask, default gateway, etc).
7
Select [Use the following IP address] and set the IP address and subnet
mask.
The projector’s own default IP address is “192.168.254.254” for wired
connections and “192.168.253.254” for wireless connections. Specify a
different IP address.
8
When the settings are completed, click the [OK] button, and then click the
[Close] button in the [Local Area Connection Properties] window to close
it.
For a wired connection, right-click [Ethernet], or for a wireless
connection, right-click [Wi-Fi]. Next, click [Properties].
69
Connection Procedure
Click [Change adapter settings].
Installation Guide
4
5
Connection Procedure
Windows 7
1
2
From the PC [Start] menu, select [Control Panel].
3
From the menu on the left side of the window, click [Change adapter
settings].
4
For a wired connection, right-click [Local Area Connection], or for a
wireless connection, right-click [Wireless Network Connection]. Next,
click [Properties].
5
Select [Internet Protocol Version 4 (TCP/IPv4)] and click the [Properties]
button. Make a note of the original network settings (IP address, subnet
mask, default gateway, etc).
6
Select [Use the following IP address] and set the IP address and subnet
mask.
The projector’s own default IP address is “192.168.254.254” for wired
connections and “192.168.253.254” for wireless connections. Specify a
different IP address.
7
When the settings are completed, click the [OK] button, and then click the
[Close] button in the [Local Area Connection Properties] window to close
it.
Click [Network and Internet], and then click [View network status and
tasks].
Mac OS X
1
2
Open the Apple Menu and select [System Preferences].
3
For a wired connection, select [Built-in Ethernet], or for a wireless
connection, select [Wi-Fi]. Next, select [Detail].
4
Click the [TCP/IP] tab. Make a note of the original network settings (IP
address, subnet mask, router, DNS server, and so on).
5
Create a new network environment and set the IP address and subnet
mask.
The projector’s own default IP address is “192.168.254.254” for wired
connections and “192.168.253.254” for wireless connections. Specify a
different IP address.
6
Click [OK], then select [Apply] to close the network preference window.
In the System Preferences window, click [Network] to display the Network
window.
Resetting the IP Address Setting of the Computer
Follow the same procedure as for changing the IP address and reset the values to
the original values based on the notes taken before the change.
70
Connection Procedure
■ Setting Up the Network
Displaying the Network Configuration Screen
1
Turn on the computer and projector.
Network functions are not available until about 40 seconds after the projector is plugged
in.
2
Projector control
Displays the projector control screen.
Settings
Shows the settings screen.
Projector name
The name of the projector on the network
Comment
Relevant notes, such as where the projector is installed
MAC address (Wired)
MAC address of the wired LAN
IP address (Wired)
IP address of the wired LAN (IPv4)
MAC address (Wireless)
MAC address of the wireless LAN
IP address (Wireless)
IP address of the wireless LAN (IPv4)
PowerStatus
The power status of the projector
Filter time
Air filter operating time
Alert
Error message (if an error has occurred)
Temperature abnormality
Light source abnormality
Faulty air filter unit
Faulty cooling fan
Faulty power supply
Faulty lens
The factory default IP address is “192.168.254.254” for wired connections (IPv4) and
“192.168.253.254” for wireless connections (IPv4). If DHCP settings are used, ask the
network administrator for the projector IP address. It is possible to check the IP address
from the projector menu (P161).
71
Connection Procedure
The following information is displayed.
Installation Guide
Launch a web browser, enter “http://(projector IP address)” in the
address bar, and press the Enter key.
The projector web screen appears.
Connection Procedure
3
Click [Settings] on the web screen.
The password input window appears.
4
Enter the user name and password on the password input window, then
click [OK].
The factory default user name is “root” and the password is “system”.
The settings screen is displayed. Complete the network settings on this screen.
For details on the projector’s web screen, see “Projector Web Screen Menu”
(P174).
To control the projector from the computer, click [Projector control] (P79).
72
Connection Procedure
Network Setting
Select a function to set up from the settings screen menu.
2
Enter setting details in the fields shown (1), and then click [OK] (2).
Installation Guide
1
Connection Procedure
(1)
(2)
73
Connection Procedure
3
A confirmation window appears. Check the contents and if they are
correct, click [Apply].
The settings are applied to the projector.
Selecting [Wired], [Wireless] or [Password] in the menu will cause this
message to be displayed: “Save completed. Please change setting and
reconnect.”
If you select functions other than above, “Save completed” is displayed. Click
[Back to top] to return to the top page of the web screen.
74
Connection Procedure
Setting Errors
When a setting-related error occurs, the error name is displayed on the screen, and
a “ ” mark is displayed next to the input field which caused the error.
Installation Guide
The error meanings are as shown below.
Meaning
Input error
A setting outside the valid range was set on the
settings screen.
Password setting error
The set password and confirmation password did
not match.
Invalid SMTP
The SMTP server IP address has not been set.
System failed to connect SMTP server.
Failed to connect to the SMTP server attempting
to send a test mail.
System failed to connect POP3 server.
Failed to connect to the POP3 server attempting
to send a test mail.
System doesn’t support this auth type.
An authentication type was set which is not
supported by the server.
System failed to authenticate.
Authentication failed attempting to send a test
mail.
The system failed to send the test mail.
Sending of test mail failed due to a connection
failure with the SMTP server or an error which
does not ordinarily occur.
Wired network is down
Wired networking is disabled.
At the time of Monday, it is already set.*
Failed to set the schedule, because operation is
already scheduled for the specified time and day.
Wireless network is Projector access
point mode
Connected in PJ AP mode.
Wireless network is down
Wireless networking is disabled.
* Messages vary depending on the day.
75
Connection Procedure
Error
Connection Procedure
Resetting Network Settings to the Default Settings
1
Perform steps 1 – 3 on “Setting Up the Network” (P71) to display the
settings screen.
2
Click [Initialize network settings].
3
A confirmation window appears. Click [OK].
76
Connection Procedure
■ Error Notification Mails
The messages shown in the following error list are sent when an error occurs in the
projector.
Error list
Errors related
to the light
source
Error name
Text
Errors related
to the air filter
Error name
Text
Errors related
to the fan
Error name
Text
Temperature abnormality
The temperature inside the projector is too high
for some reason or the outside air temperature is
higher than the operating range. If the problem is
inside the projector, check whether the projector
is installed and operating normally, unplug the
projector from the power outlet to cool down the
projector interior and then restart projection. If
the air intake or exhaust vent is blocked, remove
the obstacle. If the air filter is clogged, replace it.
If the same warning occurs again, there may be a
malfunction in the projector. Contact the Canon
Customer Support Center.
Light source abnormality
The light source does not illuminate. Restart the
projector and check projection. If the light source
does not illuminate after this, the light source
drive circuit may be damaged. Contact the
Canon Customer Support Center.
Faulty air filter unit
The air filter is not installed correctly. Install the
air filter correctly and restart the projector. If the
same warning occurs again, there may be a
malfunction in the projector. Contact the Canon
Customer Support Center.
Faulty cooling fan
There may be a malfunction in the cooling fan or
another component. Unplug the projector from
the power outlet, then plug it back into the outlet
and turn on the projector again. If the same
warning occurs again, there may be a
malfunction in the projector. Contact the Canon
Customer Support Center.
77
Connection Procedure
Error name
Text
Installation Guide
Errors related
to temperature
Connection Procedure
Errors related
to the power
Error name
Text
Errors related
to the lens
Error name
Text
Faulty power supply
Abnormal voltage is applied to some parts in the
power supply or another failure may have
occurred. Unplug the projector from the power
outlet, then plug it back into the outlet and turn on
the projector again. If the same warning occurs
again, there may be a malfunction in the
projector. Unplug the projector from the power
outlet. Contact the Canon Customer Support
Center.
Faulty lens
The lens unit is not installed correctly. Unplug the
projector, install the lens unit correctly, and then
plug the projector in again. If the same warning
occurs again, there may be a malfunction in the
projector. Contact the Canon Customer Support
Center.
78
Connection Procedure
Controlling the Projector from a Computer
The projector can be controlled from a computer over a wired or wireless network
connection.
1
2
Turn on the computer and projector.
Launch a web browser, enter “http://(projector IP address)” in the
address bar, and press the Enter key.
The projector web screen appears.
Click [Projector control] on the web screen.
The password input window appears.
4
Enter the user name and password on the password input window, then
click [OK].
The factory default user name is “root” and the password is “system”.
The projector control screen appears.
The projector can be controlled from this screen.
79
Connection Procedure
3
Installation Guide
The factory default IP address is “192.168.254.254” for wired connections and
“192.168.253.254” for wireless connections. If DHCP settings are used, ask the network
administrator for the projector IP address. It is possible to check the IP address from the
projector menu (P161).
Connection Procedure
Item
5
Explanation
Projector name
The name of the connected projector is displayed (P188).
Comment
Shows notes, such as where the projector is installed (P188).
Refresh
Refreshes the displayed contents with the most recent information.
Power
Turns projector power on or off.
Input
Select an input signal and click [Apply] to change to that input signal
(P42).
Aspect
Select an aspect and click [Apply] to change to that aspect (P81).
Image mode
Select an image mode and click [Apply] to change to that image mode
(P44).
Blank
Switches the blank setting on or off (P47).
Mute
Switches the mute setting on or off (P49).
Information
The control results and control error information are displayed at the
top of the screen.
When the operations are finished, click [Back to top] to return the initial
web screen.
80
Adjusting the Image
Filling the Screen
■ Selecting an Aspect Ratio
Select an aspect ratio type based on the input signal type, aspect ratio of the screen
and resolution.
Press the ASPECT button on the remote control to change the aspect ratio type.*
Option
Function
An image is projected at the aspect ratio of the input signal. Select
this mode for normal image projection.
True size*
The image is projected with the original resolution of the input
signal. Screens of computers with a lower display resolution than
the projector are displayed smaller but clearer than in other aspect
ratios.
The aspect ratio type can also be switched from the menu accessed from [Input
settings] > [Aspect] (P113).
Adjusting Keystone Distortion
Two types of correction are available: horizontal/vertical correction and corner
correction.
Use horizontal/vertical keystone correction to adjust image width or height
distortion separately, and use corner correction to adjust the position of each corner
of the image.
Keystone correction is also possible by pressing the KEYSTONE button on the
remote control.
81
Adjusting the Image
* There may be some cases when this cannot be selected, depending on the input
signal and/or resolution. Menus that are not available are grayed out or hidden.
Installation Guide
Auto
Adjusting the Image
■ Horizontal/Vertical Keystone Correction
1
Select [Install settings] > [Keystone] > [Horizontal-vertical keystone].
You can also display the [Horizontal-vertical keystone adjustment] window by
pressing the KEYSTONE button on the remote control.
Remote control
2
Press the pointer buttons to adjust the dimensions, and then press the
OK button.
To correct bottom distortion,
press the [ ] button.
To correct top distortion,
press the [ ] button.
Screen
To correct distortion on the left,
press the [ ] button.
To correct distortion on the right,
press the [ ] button.
• [Zoom] (P128) is not available when [Keystone] is set to [Horizontal-vertical keystone].
• The available horizontal-vertical keystone range may vary depending on the lens, lens
zoom position, and shift position.
82
Adjusting the Image
■ Corner Adjustment
1
Select [Install settings] > [Keystone] > [Corner adjustment].
Remote control
Press the pointer button of the corner for correction, and then press the
OK button.
Remote control
83
Adjusting the Image
2
Installation Guide
You can also display the [Corner adjustment] window by pressing the
KEYSTONE button on the remote control.
Adjusting the Image
3
Press the pointer buttons to adjust the corner, and then press the OK
button.
Remote control
[Zoom] (P128) is not available when [Keystone] is set to [Corner adjustment].
Resetting the Keystone Adjustment
First, press the KEYSTONE button on the
remote control twice to display the
[Keystone reset] window.
Next, select [OK] with the [ ] button, and
then press the OK button.
84
Adjusting the Image
Advanced Registration to Adjust Projected
Images
This feature enables precise correction of red, green, or blue misalignment in
different areas of the screen by color and area.
Two methods of registration are available: 5-point adjustment (using points in the
corners and center of the screen) and more precise manual adjustment based on
54 points (in a 6 x 9 grid).
Any values you set in 5-point adjustment are retained if you subsequently perform
manual adjustment. For more precise correction after 5-point adjustment, perform
manual adjustment.
■ Registration Using 5-Point Adjustment
5-point adjustment enables basic correction of color misalignment across the
screen, by moving adjustment points in each corner and the center.
In the [Install settings] menu, select [Professional settings] > [RGB
alignment] > [Advanced registration] > [Adjust] > [5-point adjustment] >
[Adjust].
The projector enters 5-point adjustment mode, and a chart is displayed.
With advanced registration, checkered or halftone image areas may be affected by
uneven colors or image artifacts.
85
Adjusting the Image
1
Installation Guide
• Adjust zoom and lens shift as needed before using [Advanced registration].
• Performing keystone adjustment will prevent accurate adjustment with [Advanced
registration]. If keystone adjustment is required, complete adjustment with [Advanced
registration] first.
Adjusting the Image
2
Use the [ ] / [ ] / [ ] / [ ] buttons to select the point for correction, and
then press the OK button.
The projector enters color selection mode.
Press the MENU button to return to [Advanced registration].
3
Select [Red] or [Blue] as the color, and then press the OK button.
• Each time you select [Chart] and press the OK button, display switches between the
chart and the source signal.
• Accessing the 5-point adjustment window during test pattern projection will show the
test pattern instead of your supplied signal.
4
Use the [ ] / [ ] / [ ] / [ ] buttons to align the adjustment points.
5
6
Press the OK button to return to the window for color selection mode.
Repeat this process to align the remaining colors and adjustment points.
86
Adjusting the Image
■ Manual Registration
Use manual adjustment to correct registration only in certain areas.
Any manual adjustment values set before switching to 5-point adjustment are cleared.
1
In the [Install settings] menu, select [Professional settings] > [RGB
alignment] > [Advanced registration] > [Adjust] > [Manual adjustment].
The projector enters manual adjustment mode, and a chart is displayed.
2
Use the [ ] / [ ] / [ ] / [ ] buttons to select the point for correction, and
then press the OK button.
The projector enters color selection mode.
Installation Guide
With advanced registration, checkered or halftone image areas may be affected by
uneven colors or image artifacts.
Adjusting the Image
Press the MENU button to return to [Advanced registration].
87
Adjusting the Image
3
Select [Red], [Green], or [Blue] as the color, and then press the OK
button.
• Each time you select [Chart] and press the OK button, display switches between the
chart and the source signal.
• Accessing the manual adjustment window during test pattern projection will show the
test pattern instead of your supplied signal.
4
Use the [ ] / [ ] / [ ] / [ ] buttons to align the adjustment points.
5
6
Press the OK button to return to the window for color selection mode.
Repeat this process to align the remaining colors and adjustment points.
■ Resetting Image Registration
Clears the values set in 5-point adjustment or manual adjustment.
1
In the [Install settings] menu, select [Professional settings] > [RGB
alignment] > [Advanced registration] > [Adjust] > [Reset].
A confirmation message for resetting is displayed.
2
Select [OK] to reset the adjustment.
The following tasks are executed.
• Values set in 5-point adjustment are cleared.
• 5-point adjustment is deactivated.
• Values set in manual adjustment are cleared.
[Advanced registration] setting
values are not cleared if you
switch lenses. However, on
startup after you switch lenses, a
message is displayed requesting
you to confirm advanced
registration settings if, for any
adjustment point, [Advanced
registration] setting values differ
from defaults.
88
Adjusting the Image
Adjusting Projected Images with Partial
Distortion Correction
This feature enables precise correction of partial projected image distortion in your
specified areas. Red, green, and blue are adjusted together.
• Correction separate from [Advanced registration] is possible.
• Correction is not possible from adjustment points on the outermost edge toward the
outside of the projected image.
Installation Guide
Cannot be specified outside
Select one of the 54 adjustment points (in a 6 x 9 grid) for precise distortion
correction.
1
In the [Install settings] menu, select [Professional settings] > [Partial
distortion correction] > [Adjust].
The projector enters partial distortion correction point selection mode, and a
window is displayed for selection of areas to correct.
89
Adjusting the Image
■ Correcting Partial Distortion
Adjusting the Image
2
Use the [▲] / [▼] / [ ] / [ ] buttons to select the point to fine-tune.
3
After selecting the point to fine-tune, press the OK button.
The projector is now in partial distortion correction mode.
• To return to selection of the point for partial distortion correction, press the MENU
button.
• Each time you select [Chart] and press the OK button, display switches between the
chart and the source signal.
• Accessing the partial distortion correction window during test pattern projection will
show the test pattern instead of your supplied signal.
4
Use the [▲] / [▼] / [ ] / [ ] buttons to fine-tune the adjustment point for
partial distortion correction.
5
6
Select [Return] to return to point selection.
Repeat this process to correct other areas.
90
Adjusting the Image
■ Resetting Image Registration
Clears the values set in partial distortion correction.
1
In the [Install settings] menu, select [Professional settings] > [Partial
distortion correction] > [Reset].
A confirmation message for resetting is displayed.
2
Select [OK] to reset the adjustment.
Installation Guide
Adjusting the Image
91
Adjusting the Image
Adjustment Using a Test Pattern
Resolution and colors can be adjusted during installation by using test patterns.
To access the test pattern menu, select [Test pattern] > [On] (P138) in the [Install
settings] menu or press the TEST PATTERN button on the remote control.
While the test pattern is displayed, you can use the [ ] / [ ] buttons to switch
patterns. Also, if there is an option pattern available, you can use the [ ] / [ ]
buttons to switch pattern. A dialog box is shown during test pattern display that
identifies the current test pattern and provides operating instructions.
Watch the test pattern projected as you adjust the image.
The following test patterns can be displayed.
Use [ ] / [ ] to
switch patterns
(1)
Use [ ] / [ ] to switch
option patterns
Color bars
(2)
Stairstep H
(3)
Stairstep V
(4)
Raster 100%
(White / red / green / blue)
(5)
Raster 50%
(White / red / green / blue)
(6)
Color steps
(7)
Checker
(8)
Multi
(9)
Character
(10)
Focus
(11)
Border
Cross Hatch
(12)
(13)
DICOM
92
Special Arrangements
Adjusting Peripheral Focus
This feature enables focus adjustment around the edges of the screen.
• Use marginal focus adjustment for curved screens, such as domes.
• Use marginal focus adjustment to bring images on flat screens into focus if image
edges remain warped after you adjust the overall focus.
• The marginal focus feature is not available depending on the type of lens installed.
• [Marginal focus] must be set to [On] in advance (P134).
■ Bringing Image Edges into Focus
To adjust peripheral focus, press the FOCUS button on the remote control or the
LENS button on the projector.
1
Press the FOCUS button on the remote control twice to display the
marginal focus adjustment window.
Remote control
Installation Guide
Press twice.
Special Arrangements
93
Special Arrangements
Pressing the LENS button on the projector repeatedly switches between
windows for lens-related parameters.
Press the LENS button twice to display the marginal focus adjustment window.
Projector
Press twice.
When [Marginal focus]
is set to [On].
When [Marginal
focus] is set to [Off].
2
Press the pointer buttons to adjust the focus at image edges.
Remote control
Projector
Press the [ ] / [ ] / [ ] / [ ] buttons to adjust peripheral focus.
The focus at the center of the screen may become blurred when the indicator is
moved to nearly to the top or bottom edge in the [Marginal focus adjust.]
window. If this happens, perform steps (1) to (3) below repeatedly to adjust the
focus of the entire screen.
(1) Use [Focus adjustment] (P43) to adjust the focus at the center of the
screen.
(2) Use [Marginal focus adjust.] to adjust the focus at the edges of the
screen.
(3) Check the focus at the center of the screen.
When using the lens shift adjustment function, the optical axis may be shifted further from
the center of the screen than when the function is not used. This can be adjusted by
performing steps (1) to (3) repeatedly.
94
Special Arrangements
3
Once image edges are in focus, press the OK or FOCUS button.
■ Resetting Adjustment
Clears the values set in marginal focus adjustment and returns the lens marginal
focus to the standard position.
In the [Install settings] menu, select [Professional settings] > [Marginal focus] >
[Reset] to reset the adjustment.
After the above window disappears, the values set in [Marginal focus] are cleared
and the lens marginal focus is returned to the standard position. A reset can be
applied regardless of whether [Marginal focus] is set to [On] or [Off].
Installation Guide
• Setting [Marginal focus] to [Off] will not reset the setting value for marginal focus. Select
[Off] to preserve the setting value and prevent further adjustment.
• Even after resetting, the focus may be slightly off at the center and edges of flat
screens.
• If necessary, use marginal focus adjustment to bring the center and edges into focus.
Special Arrangements
95
Special Arrangements
Projecting from Multiple Projectors at Once
(Edge Blending)
Overlapping edges of images from
multiple projectors used together can be
blended to make the overall image more
seamless. This feature is called edge
blending.
Follow these steps for basic edge
blending with two projectors side by
side.
Keep in mind when projecting from
multiple projectors that each unit may
have a different color balance. Thus,
even with the same model, differences
in color may be noticeable.
1
Select [Install settings] > [Professional settings] > [Edge blending] >
[Adjust].
2
Set [Marker] to [On].
Marker lines are projected on the images. The red marker indicates the start
position for adjustment, and the green marker, the end position.
Initially, only the red marker is visible when you prepare for edge blending,
because it is projected over the green marker.
96
Special Arrangements
3
In [Side], select [Start position] and use the [ ] / [ ] buttons to move the
start marker to the outer edge of the overlapping area.
Do this for each edge; on the top, bottom, left, and right.
4
Select [Width] and use the [ ] / [ ] buttons to move the end marker to the
inner edge of the overlapping area.
Do this for each edge; on the top, bottom, left, and right.
Start marker
End marker
5
Set [Marker] to [Off].
97
Special Arrangements
The area between the starting and ending markers is called the blending area.
Shading is applied to this area, and the brightness is adjusted to match
portions that overlap with other areas. After you complete settings for one
image, do the same thing for the other one to specify the blending area. Adjust
the settings to make the blending area for each image the same.
Installation Guide
Blending area
Special Arrangements
■ Adjusting the Overlapping Area
Adjust the overlapping area to create a smoother transition between projected
images.
Matching Colors in the Overlapping Area
In overlapping projection, portions of
images in the overlapping area that pick
up other colors or are miscolored may
be more noticeable. You can make this
overlapping area appear less distracting
by performing [Color blending
adjustment].
Edge-blending area
1
Select [Install settings] > [Professional settings] > [Edge blending] >
[Adjust] > [Color blending adjustment] > [Adjust].
2
First adjust red, green, and blue together by changing the [White] value,
and then adjust [Red], [Green], and [Blue] values individually.
3
Repeat this adjustment on all projectors.
98
Special Arrangements
Matching Black in the Overlapping Area
In overlapping projection, dark
Left image
Right image
colors are projected with less
intensity than other colors in the
Area where dark
overlapping area. You can make
colors look lighter
this overlapping area less
Position of end
distracting by adjusting the black
marker (hidden)
level of non-overlapping image
areas.
Here, the non-overlapping image
area (from the end marker toward
D-area
Blending area
the center of the image) is called
area “D.”
Normally, three areas are identified in the context of end markers: A, B, and C.
In the following instructions, only area D is adjusted, and the widths of A, B, and C
are left at the default value of 0.
Select [Install settings] > [Professional settings] > [Edge blending] >
[Adjust] > [Black level adjustment] > [Adjust].
2
3
Select [Adjustment type] > [Black level].
4
Repeat this adjustment on all projectors.
After selecting [D-area base], as you watch the image, adjust the values
so that the brightness and colors of the blending area and area D match.
99
Special Arrangements
1
Installation Guide
To prepare for adjustment, select [System settings] > [User screen settings] > [No signal
screen] > [Black], start projection with no input signal, and turn off the room lights, so that
you can check dark image areas.
Special Arrangements
■ Making Overlapping Edges Less Noticeable
The black level along the right edge of area Left image
Position of end
marker (hidden)
D (along the blending area) may be more
noticeable than that of surrounding areas.
By adjusting the black level of area B, you
can make the transition smoother.
To compensate, adjust each area as
CBA
follows.
D-area
Blending area
When the projected image has multiple
blending areas (on the top, bottom, and
Areas C - A (default: 0)
each side), the width of areas A, B, and C
Area A: Black level cannot be adjusted.
must be adjusted to suit these blending
Area B: Adjust to a black level different
areas.
from that of area D.
In this example, instructions are given for
Area C: Adjust to provide a smooth
transition relative to the black
adjusting area B.
levels of areas B and D.
1
Select [Install settings] > [Professional settings] > [Edge blending] >
[Adjust] > [Black level adjustment] > [Adjust].
2
3
Select [Adjustment type] > [Area] > [Side] > [Right].
4
Select [Adjustment type] > [Black level]. Adjust [B-area base] as you
watch the image.
5
6
As you watch the image, adjust the width of areas A, B, and C.
Select [B-width], and then adjust the width of area B to roughly match the
area where the black level is noticeable.
Readjust the black level of area B, as needed.
• Results of adjusting the black level of area B are applied to all sides.
• If you perform adjustments using [Color blending adjustment] or other menus, that may
not eliminate the distracting colors and differences in brightness in areas where the
images overlap.
• Blending can be fine-tuned by adjusting [Adjustment type] > [Black level] > [Red],
[Green], and [Blue].
100
Menu Guide
101
Using Menus
Use the menus to set the operation of the projector in detail.
1
Press the MENU button to display the menu window.
Remote control
2
Projector
Press the [ ] / [ ] buttons to select a tab.
Remote control
Projector
• If the tab position is not highlighted in orange, press the [ ] / [ ] buttons to
move the current selection to the top.
3
Press the [ ] / [ ] buttons to select an item.
Remote control
4
Projector
Select contents.
How to select the contents varies depending on the item.
Selecting from a list Example: Aspect (P113)
1. Select [Aspect].
2. Press the OK button or [ ] button
to display a list of the contents.
3. Use the [ ] / [ ] buttons to select
the desired contents.
4. When you have found the
contents you desired, press the
OK button or [ ].
102
Using Menus
Adjusting with the [ ] / [ ] buttons Example: Contrast (P118)
1. Select [Contrast].
2. Use the [ ] / [ ] buttons to adjust
the setting.
Selecting from a different screen (1) Example: Logo capture (P140)
1. Select [Logo capture].
2. Press the OK button to display a
different screen.
3. Then follow the instruction on the
screen.
Pressing the MENU button causes the menu screen to disappear.
The menu screen will also disappear if the EXIT button is pressed.
Menu Guide
5
Using Menus
103
Using Menus
The menu screen is divided into 6 tabs as shown below.
[Input settings] tab (P113)
You can set the type of signal or the method of projection of the
images input.
[Image adjustment] tab (P117)
You can adjust the image quality and colors according to
your preference.
[Install settings] tab (P127)
This setting is used when installing the projector.
[System settings] tab (P139)
You can set the operation of the projector.
[Network settings] tab (P158)
These settings are for when using the
projector from a PC via a network.
[Information] tab (P173)
You can check information about
the signal types of the images
projected and other information.
Contents of menu
Menu items
104
Menu Configuration
Input settings (P113)
Menu
Aspect
Input level
Super white
Color space
Progressive
Input signal details
HDR information
Option / Submenu
Auto*, True size
Auto*, Normal, Expanded
Off, On*
Auto*, RGB, YCbCr
Off, Film/auto*, Video 1, Video 2, 25p/30p(PsF)
Format information, Color/Range information
EOTF,
Display primaries [0],[1],[2],
White point,
Max display mastering luminance,
Min display mastering luminance,
Max content light level,
Max frame-average light level
Details
P113
P114
P114
P114
P115
P115
P116
*: Factory default, or state after [Factory defaults] is executed.
Image adjustment (P117)
Menu
Image mode
P118
User 1, User 2, User 3, User 4, User 5
P118
Color level
Color balance
Color temperature
P118
P118
P118
P119
P119
P119
P119
P119
P119
Preset 1, Preset 2, Preset 3*, Preset 4
(Clear base), Preset 5 (Blue base)
Color temperature (1)
Color adjustment
Details
P119
P119
P119
P119
P119
P119
105
Menu Configuration
R Gain
G Gain
B Gain
R Offset
G Offset
B Offset
P120
Menu Guide
Create profile / Save
profile
Baseline image mode
Brightness
Contrast
Sharpness
Gamma
HDR range
Option / Submenu
Standard*, Presentation, Dynamic, Video, Photo/sRGB, DICOM SIM, User
1–5
Menu Configuration
Menu
Advanced adjustment
Light source mode
Brightness level (5)
Reset
Option / Submenu
Off*
Ambient light (2)
Adjust
Type, Level
Random noise reduction
Off*, Low, Middle, High
Off*, MPEG-NR: Low, MPEG-NR:
Middle, MPEG-NR: High, Frame-NR:
Digital noise reduction
Low, Frame-NR: Middle, Frame-NR:
High
Dynamic gamma
Off* (7), Low (8), Middle, High
Dynamic
Off*, Low, Middle,
contrast
High
Contrast detail adjustment
Manual light adjustment (3)
Manual signal adjustment (3)
Colorimetry (6)
Auto*, BT.709, BT.2020
HDR (6)
Auto*, Off, HDR10, HLG
Off* (7), Weak* (8),
Flesh
Middle, Strong
Off* (7), Weak* (8),
Sky
Mem. color correct
Middle, Strong
Off* (7), Weak* (8),
Green
Middle, Strong
6-axis color adjust
Off*, Adjust, Reset
Fine-Tune Gamma (4)
Off*, Adjust
Normal*, Quiet 1, Quiet 2, Adjust
OK, Cancel
*: Factory default, or state after [Factory defaults] is executed.
Displayed under the following conditions.
(1): When image mode is [DICOM SIM]
(2): When image mode is [Photo/sRGB]
(3): When dynamic contrast in contrast detail adjustment is [Off]
(4): When image mode is not [DICOM SIM]
(5): When the operating mode is not set to [Normal]
(6): When image mode is [Video]
(7): When image mode is not [Dynamic]
(8): When image mode is [Dynamic]
106
Details
P120
P121
P121
P121
P122
P122
P122
P122
P123
P124
P125
P125
P126
Menu Configuration
Install settings (P127)
Menu
Positional lock
Image flip H/V
Zoom (11)
Keystone
Professional settings
Iris
Test pattern
P129
P130
P130
P130
P132
P133
P133
P133
P134
P134
P137
P138
P138
P138
*: Factory default, or state after [Factory defaults] is executed.
(9): When using lenses not equipped with optical zoom, this is the factory default, or state after [Factory defaults]
is executed
(10):When using lenses equipped with optical zoom, this is the factory default, or state after [Factory defaults] is
executed
(11): Only available in the following cases
• Using lenses not equipped with optical zoom
• Keystone set to [Off]
(12):XX% indicates the preset position of the installed lens.
107
Menu Configuration
Screen color
Off (9), Horizontal-vertical keystone (10), Corner adjustment
Reset
OK, Cancel
Wide bandwidth
HDMI-1 EDID
(4K60Hz)*, High
mode
compatibility
EDID mode setting
Wide bandwidth
HDMI-2 EDID
(4K60Hz)*, High
mode
compatibility
Micro-digital
Off*, Adjust
image shift
Registration
Off*, Adjust
RGB alignment
Advanced
Off*, Adjust
registration
Partial distortion correction
Off*, Adjust, Reset
High altitude
Off*, On
Normal*, Fixed brightness, Long
Operating mode
duration 1, Long duration 2
Lens shift mode
Normal*, Expanded
Off*
Marginal focus
On
OK
Reset
Off*
Left, Right, Top,
Bottom, Color
Edge blending
blending adjustment,
Adjust
Black level
adjustment, Marker,
Reset
Load position 1 – 3
Save position 1 – 3
Preset
XX% (10)(12), 0%
positions
Lens shift reset
OK
Normal*
Greenboard
R Gain, G Gain, B Gain, R Offset, G
Adjust
Offset, B Offset
Open*, Adjust
Off*, On
Details
P128
P128
P128
Menu Guide
Lens - Position
Option / Submenu
Off*, On
None*, Ceiling mounted, Rear, Rear, Ceiling mounted
Menu Configuration
System settings (P139)
Menu
Option / Submenu
OK, Cancel
Upper L, Upper R, Center*, Lower L,
Logo position
Lower R
User screen settings
No signal screen
Black, Blue*, User logo
Black, Blue, Light source off*, User
Screen when blank
logo
Projector on
Skip, Canon logo*, User logo
Upper L, Upper R, Center*, Lower L,
Menu position
Lower R
Menu display time
Normal*, Extended
Auto, Off*, 90 degrees
Menu rotation
counterclockwise, 90 degrees
On screen
clockwise
Guide
Off, On*
Show input status
Off, On*
Air filter warning display
Off, On*
Overheat warning display
Off*, On
Beep
Off, On*
Key repeat
Off, On*
Key lock
Off*, Main unit, Remote (wireless)
IR receiver settings
All*, Front, Rear
Remote control channel
Ch1, Ch2, Ch3, Ch4, Independent*
Disable
HDMI-1*
HDMI-2
INPUT A
DP-1
DP-2
HDBaseT
DP 1x2
Disable
Remote control/Side
control
HDMI-1*
HDMI-2
[INPUT A-C] button settings
INPUT B
DP-1
DP-2
HDBaseT
DP 1x2
Disable
HDMI-1*
HDMI-2
INPUT C
DP-1
DP-2
HDBaseT
DP 1x2
HDMI-1
Off, HDMI-1*
HDMI-2
Off, HDMI-2*
DP-1
Off, DP-1*
Audio in terminal select
DP-2
Off, DP-2*
HDBaseT
Off, HDBaseT*
DP 1x2
Off, DP-1*, DP-2
HDBaseT signal quality
Off*, On
Extron XTP
Service port*, HDBaseT
Baud rate, Data bits,
Communication
Serial communication
Parity
settings
Detail
Stop bit
1*, 2
Command monitor
Off*, On, Display, Clear
Logo capture
108
Details
P140
P140
P140
P140
P141
P141
P141
P142
P142
P143
P143
P143
P143
P144
P144
P144
P145
P145
P145
P146
P146
P146
P147
Menu Configuration
Menu
*: Factory default, or state after [Factory defaults] is executed.
Details
P147
P148
P148
P148
P148
P149
P149
P150
P151
P151
P152
P155
P156
P156
P156
P157
P157
Menu Guide
Option / Submenu
Normal, Low-power*
Off*, On
Disabled, Light source off, Standby*
Power supply settings
5 min., 10 min., 15 min.*, 20 min.,
Power management duration
30 min., 60 min.
Direct power on
Off*, On
Motion blur reduction Off*, Weak, Strong
English*, Deutsch, Français, Italiano, Español, Português, Svenska,
Русский, Nederlands, Suomi, Norsk, Türkçe, Polski, Magyar, Čeština,
Language
Dansk, ‫إنجليزي‬, 中文简体 , 中文繁體 , 한국어 , 日本語
Password settings
Off*, On
Register password
Date and time
Year/month/date,
Date display
Month/date/year,
format
Date/month/year
Daylight
Date and time settings
Off*, On, Edit
saving time
Region, Time zone
Off, On (IPv4), On
SNTP
(IPv6)
Default
Off*, On, Edit
Other settings
Schedule
Special period
Off*, On, Edit
1–5
Gamma
Off*, Adjust
restore
Calibration
Light source
OK, Cancel
calibration
Trigger out
Off*, Link with power
Air filter counter
Reset
Yes, No
Power counter
Firmware
Yes, No
Factory defaults
OK, Cancel
Standby power setting
Quick startup
Power management mode
Menu Configuration
109
Menu Configuration
Network settings (P158)
Menu
Network settings lock
Network password
setting
Register network
password
Network (wired/
wireless)
Unlock
Lock*
Option / Submenu
Password input
Details
P159
Off, On*
P159
Password input
P159
Off/Off*, On/Off, On/On (Pj AP), Off/On (Pj AP), Off/On (Infra)
P160
MAC address
IP address, Subnet mask, Gateway
address
DHCP
Off*, On
Detailed IPv4 address settings
IP address, Subnet
TCP/IP
mask, Gateway
settings
address
Detailed settings
IPv6
Off*, On
(wired)
Link local, Auto <1> – <5>, Manual,
Gateway
Auto settings Off, On*
Detailed IPv6 address settings
IP address, Prefix
Manual
length, Gateway
settings
address
Network setting initialization
Yes, No
Mode, SSID, Security, Channel, Signal strength, MAC address
PBC
Yes, No
Wi-Fi Protected Setup
PIN
Yes, No
Mode
Update, Switch page,
SSID 1 – 16, SSID
SSID
input, Manual SSID
input
Open, WEP, WPA2
Security
AES, WPA/WPA2
Manual settings
TKIP/AES
Channel
Key ID
1, 2, 3, 4
Key type
ASCII, HEX
Key
Detailed settings
(wireless)
Enter
IP address, Subnet mask, Gateway
address
DHCP
Off*, On
Detailed IPv4 address settings
IP address, Subnet
TCP/IP
mask, Gateway
settings
address, Enter
IPv6
Off*, On
Link local, Auto <1> – <5>, Manual,
Gateway
Auto settings Off, On*
Detailed IPv6 address settings
IP address, Prefix
Manual
length, Gateway
settings
address, Enter
Network setting initialization
Yes, No
PJLink
Off, On*
AMX Device Discovery Off*, On
Crestron RoomView
Off*, On
110
P161
P162
P164
P165
P167
P170
P171
P171
Menu Configuration
Menu
Option / Submenu
Details
E-mail sender address
E-mail recipient address
IPv4
Information
Detailed information (wired)
IPv6
Link local, Auto,
Manual
P172
IPv4
Detailed information (wireless)
IPv6
Link local, Auto,
Manual
*: Factory default, or state after [Factory defaults] is executed.
Menu Guide
Menu Configuration
111
Menu Configuration
Information (P173)
Menu
Model name
Input signal
Firmware
Serial no.
Projector usage time
IP address (wired)
IP address (wireless)
Projector name
Comments
System information ID
The following settings are not reset
even when factory defaults are
restored.
• Selected input signal
• [Image adjustment]
- Create profile / Save profile
- Saved values for fine-tuning
gamma
• [Install settings]
- Registration
- Advanced registration
- Partial distortion correction
- High altitude
- Operating mode
- Lens shift mode
- Marginal focus (setting value)
- Saved values for lens position
• [System settings]
- Remote control channel
- Extron XTP
- Stop bit
- Standby power setting
- Quick startup
- Language
- Date and time settings
- Schedule
- Gamma restore
- Trigger out
- Air filter counter
- Power counter
- Firmware
• [Network settings]
• [Information]
112
Menu Description
Input settings
This section describes settings for aspect ratio and resolution.
Menu screen when the input signal is HDMI-1
Menu
Function
Details
Select an image aspect ratio.
P113
Input level
Select the input level for HDMI, HDBaseT or
DisplayPort signals.
P114
Super white
Select super white mode for HDMI, HDBaseT or
DisplayPort signals.
P114
Color space
Select the color space for HDMI, HDBaseT or
DisplayPort signals.
P114
Progressive
Select progressive processing for still images in
cinematic content or moving images in videos.
P115
Input signal details
Shows input signal details for each input terminal
used.
P115
HDR information
Shows the Dynamic Range and Mastering InfoFrame
for HDMI signals or HDBaseT signals.
P116
Menus that are not available are grayed out.
Menu Guide
Aspect
Aspect
Select a projection aspect ratio for images.
The ASPECT button on the remote control can also be used to select the [Aspect]
settings.
Option
Function
Auto
An image is projected at the aspect ratio of the input signal.
Suitable for most projection.
True size
The image is projected with the original resolution of the input
signal.
Menus that are not available are grayed out.
113
Menu Description
> [Input settings] > [Aspect]
Menu Description
Input level
> [Input settings] > [Input level]
Adjust the input level for content projected via HDMI, HDBaseT or DisplayPort.
Option
Auto
Function
Automatically switches the input level based on the input signal.
Normal
Limits the input level to 16 – 235.
Expanded
Enables a full input level of 0 – 255.
• In [Auto] mode, the signal level is selected automatically. (Some AV equipment and
HDBaseT transmitters may not support this.)
• If your AV equipment HDMI / HDBaseT output can be set to [Normal] or [Expanded], we
recommend [Expanded]. The contrast of images will be improved and dark scenes will
be rendered more realistically. In this case, set [Input level] to [Auto] or [Expanded].
For more detailed information, refer to the user’s manual for the AV equipment
connected to the projector.
Super white
> [Input settings] > [Super white]
Select to project white signals in HDMI, HDBaseT or DisplayPort input that are in a
range of 16 – 235 at 100% – 109% brightness (235 – 255).
Option
Function
Off
Disable super white.
Project white signals with an input level of 235 at 100% brightness. All
white signals with an input value exceeding 235 are also projected at
100% brightness.
On
Convert input signals in a range of 16 – 235 so that an input level of 255
is projected as white 109% at 100% brightness.
• Super white has no effect when [Input level] is set to [Expanded].
• Set this option to [Off] if projection looks distorted or unnatural when it is [On].
• Setting this option to [On] will darken the overall image.
Color space
> [Input settings] > [Color space]
Select the color space for HDMI, HDBaseT or DisplayPort signals.
Option
Function
Auto
Selects the optimal color format for input signals.
RGB
Forces the projector to handle the input signal as an RGB signal.
YCbCr
Forces the projector to handle the input signal as a color difference
signal.
114
Menu Description
Progressive
> [Input settings] > [Progressive]
Performs progressive processing optimized for still images in cinematic content or
moving images in videos, when interlaced HDMI or DisplayPort signals are
supplied.
Option
Function
Off
Does not perform progressive processing.
Film/auto
Suitable for still images or typical moving images. Performs progressive
processing for video or cinematic content.
Video 1
Suitable for projecting video with high image quality and relatively slow
movement. Performs progressive processing optimized for HD video.
Video 2
Suitable for projecting video with faster movement. Performs
progressive processing optimized for fast-moving video.
25p/30p(PsF)
Performs progressive processing optimized for 1080 PsF/25 or
1080 PsF/30 video (25 or 30 fps, respectively).
Select [Off] when flickers and horizontal lines are noticeable in media that has a lot of
fast-moving action.
Input signal details
> [Input settings] > [Input signal details]
Shows details about video signals supplied to the selected input terminal.
This menu is displayed for HDMI, DisplayPort, or HDBaseT input.
Menu Guide
115
Menu Description
As format information, the resolution, frequency, and Video Identification Code
(VIC) are indicated.
As color information, the color format/subsampling and color space are indicated.
As range information, the range and depth are indicated.
Menu Description
HDR information
> [Input settings] > [HDR information]
When HDMI or HDBaseT signals are supplied, shows the Dynamic Range and
Mastering InfoFrame information.
The projector determines and indicates whether input signals are SDR or HDR.
HDR signals have an area that includes color and luminance information, and this
information is indicated. The following information is displayed.
Item
Information Indicated
Details
Traditional gamma-SDR
EOTF
Traditional gamma-HDR
SMPTE ST 2084
Indicates various gamma
information of the video
content
HLG
Display primaries [0],[1],[2]
x: 0.0000 – 1.0000
y: 0.0000 – 1.0000
Coordinates of the three
vertices of the gamut triangle
in the color space
White point
x: 0.0000 – 1.0000
y: 0.0000 – 1.0000
Coordinates of “white” in the
color space
Max display mastering
luminance
1 – 65535 cd/m2
Maximum luminance of the
display used when the video
content was produced
Min display mastering
luminance
0.0001 – 6.5535 cd/m2
Minimum luminance of the
display used when the video
content was produced
Max content light level
1 – 65535 cd/m2
Maximum luminance of
scenes in the video content
1 – 65535 cd/m2
Maximum value among
frames of video content used
to determine average
luminance
Max frame-average light
level
116
Menu Description
Image adjustment
This section describes image quality settings such as brightness, contrast,
and sharpness.
Menu screen when the input signal is HDMI-1
Menu
Function
Details
P118
Create profile
Save desired image quality settings as profiles.
P118
Baseline image mode
Shows the image mode that is basis of the profile.
P118
Brightness*
Adjust image brightness.
P118
Contrast*
Adjust image contrast.
P118
Sharpness*
Adjust image sharpness.
P119
Gamma*
Correct loss of detail in shadows or highlights.
P119
HDR range*
Within the dynamic range of SMPTE ST 2084, set the
range to use.
P119
Color adjustment*
Fine-tune image colors.
P119
Advanced adjustment*
Fine-tune noise reduction and color tone.
P120
Light source mode*
Adjust projection brightness and operating sounds.
P125
Brightness level*
Adjust projection brightness as controlled by the drive
current of the laser diode.
P125
Reset
Restore default image settings.
P126
Menus that are not available are grayed out or hidden.
* Any adjustments you make are stored for each combination of input signal and
image mode.
117
Menu Description
Select overall image quality to suit the projected
image.
Menu Guide
Image mode*
Menu Description
Image mode
> [Image adjustment] > [Image mode]
Select the overall image quality for projected images. Can also be selected by
pressing the IMAGE button on the remote control (P33).
Option
Types of Images
Effect
Standard
Computer screens, or media
played with video software
Bright overall; white, with natural
colors
Presentation
Images mainly consisting of text
Bright overall
Dynamic
Video content
Bright overall
Video
Video from camcorders
Somewhat dark; colors resemble
TV
Photo/sRGB
Digital photos from sRGBcompatible cameras
Somewhat dark; conforms to the
sRGB standard
DICOM SIM
Medical or other monochrome
images
Conforms to DICOM Standard
Part 14. However, the projector
cannot be used in diagnosis or
similar applications.
User 1 – 5
Up to five user profiles can be stored for your selected image quality
settings. Stored profiles are available in this setting as an image
mode.
Menus that are not available are grayed out.
You can adjust the image quality by adjusting the following items in each image mode:
[Brightness], [Contrast], [Sharpness], [Gamma], [HDR range], [Color adjustment],
[Advanced adjustment], [Light source mode] and [Brightness level]
Create profile / Save profile
> [Image adjustment] > [Create profile]
Save desired image quality settings in up to five user profiles.
• The saved settings are [Brightness], [Contrast], [Sharpness], [Gamma], [HDR range],
[Color adjustment], [Advanced adjustment], [Light source mode] and [Brightness level].
• The image mode name which was the basis for the settings change is also saved in the
user profile. When a user profile is selected as the image mode, the image mode that
was the basis for that user profile is displayed in the menu as [Baseline image mode].
Brightness
> [Image adjustment] > [Brightness]
Adjust image brightness.
Contrast
> [Image adjustment] > [Contrast]
Sharpen or soften image contrast.
118
Menu Description
Sharpness
> [Image adjustment] > [Sharpness]
Adjust image sharpness.
Gamma
> [Image adjustment] > [Gamma]
Correct image areas that are too dark or too bright to see clearly.
For more detailed adjustment, use “Fine-Tune Gamma” (P124).
HDR range
> [Image adjustment] > [HDR range]
Within the dynamic range of SMPTE ST 2084, set the range to use.
[Gamma] is not shown when the menu includes [HDR range].
[HDR range] can only be set in the following cases.
• Image mode (P118) is set to [Video] and HDR (P122) is [HDR10]
• Image mode (P118) is set to [Video], HDR (P122) is [Auto], and HDR10 signals are
supplied
• When you adjust the HDR range, the screen switches to the new range setting after a
few seconds.
Color adjustment
> [Image adjustment] > [Color adjustment]
Menu Guide
Adjust color-related settings such as color level, color balance, and color
temperature.
Menu Description
Submenu
Function
Color level
Adjusts the intensity of colors.
Color balance
Adjusts the color balance of a purplish or greenish image.
Color temperature
Adjusts the white color temperature.
R / G / B Gain
Adjust the gain of each color.
R / G / B Offset
Adjusts the color offset of each color.
119
Menu Description
In [DICOM SIM] image mode, [Color temperature] is not adjusted with numeric values but
set to one of the following five presets.
Preset 1: Prioritize brightness, relative to DICOM Standard Part 14.
Preset 2: Prioritize color tone, relative to DICOM Standard Part 14.
Preset 3: Adjust color to conform to DICOM Standard Part 14.
Preset 4: Reproduce colors of X-ray film (Clear base).
Preset 5: Reproduce colors of X-ray film (Blue base).
Advanced adjustment
> [Image adjustment] > [Advanced adjustment]
Fine-tune noise reduction and color tone.
Ambient light
Minimize the effect of ambient light on the screen.
Option
Off
Function
Projects an image with no correction.
Tungsten
Type
Fluorescent
Adjust
Level
For ambient light from conventional light
bulbs or fluorescent light of this color.
For ambient light from a “day white”
fluorescent source.
L
For an ordinary brightness of ambient
light.
H
For bright ambient light.
Examples of Ambient Light Level Settings
Level
Example Location
L
Projection room, sports bar, etc.
H
Conference room, lecture room, etc.
• This setting is available when the image mode is set to [Photo/sRGB] (P118).
• This setting is available when the baseline image mode is set to [Photo/sRGB].
120
Menu Description
Random noise reduction
Reduce random image noise*.
* Effective on noise with an irregular frequency or amplitude.
Option
Function
Off
Disables random noise reduction.
Low
Middle
High
Specify one of three levels of intensity of the random noise reduction.
Select [Low] for fast-moving images or [High] for slow-moving images.
Digital noise reduction
Reduce digital image noise. Note that compared to MPEG noise reduction, frame noise
reduction improves gradation of projected images.
Option
Function
Off
Disables digital noise reduction.
MPEG-NR: Low
MPEG-NR: Middle
MPEG-NR: High
Frame-NR: Low
Frame-NR: Middle
Frame-NR: High
Specify one of three levels of intensity of MPEG and frame noise
reduction
Dynamic gamma
You can adjust the gradation representation of light and dark portions of an image
automatically.
Option
Function
Disable dynamic gamma adjustment.
Low
Middle
High
Specify one of three levels of dynamic gamma adjustment.
Menu Guide
Off
Menu Description
121
Menu Description
Contrast detail adjustment
When the projected image is dark, you can make the dark portions appear even darker by
adjusting the luminance of the light source and the amount of signal adjustment.
Submenu
Function
Automatically increase the contrast as the input signal changes.
Option
Function
Dynamic
contrast
Off
Do not perform dynamic contrast adjustment.
Low
Middle
High
Specify one of three levels of dynamic contrast
strength.
Manual light
adjustment
Adjust the brightness of the light source manually.
Manual signal
adjustment
Adjust the amount of signal processing adjustment manually.
Colorimetry
Select the input color space.
Option
Function
Auto
Automatically determine the optimal color space (BT.709 or BT.2020)
based on input signals.
BT.709
Forces use of the BT.709 color space.
BT.2020
Forces use of the BT.2020 color space.
[Colorimetry] can only be set when the image mode (P118) is [Video].
HDR (High Dynamic Range)
Projection conforms to HDR signals (HDR10 or HLG) with an expanded range of image
luminance, preserving detail in highlights and shadows.
Option
Function
Auto
Automatically use HDR when HDR signals are supplied.
Off
Prevent use of HDR.
HDR10
Require HDR 10-compliant projection.
HLG
Require HLG-compliant projection.
[HDR] can only be set when the image mode (P118) is [Video].
Mem. color correct
Enhances skin tones, blue skies, and greens, so that these colors are more consistent with
people’s remembered impressions.
Submenu
Flesh
Sky
Green
Function
Off
Disable correction.
Weak
Middle
Strong
Specify the level of correction.
122
Menu Description
6-axis color adjust
Fine-tune RGB (red, green, blue) and CMY (cyan, magenta, yellow) hues in images.
Option
Off
Function
Disables 6-axis color adjustment.
Adjust
Use the [ ] / [ ] buttons to select [ Hue], [ Saturation], or
[ Brightness], and use the [ ] / [ ] buttons for adjustment.
• When you are finished adjusting the color, press the OK button.
Adjustment is not applied to the projected menu itself.
Reset
Reset the marker settings.
Menu Guide
Menu Description
123
Menu Description
Fine-Tune Gamma
Adjust white, red, green, and blue gamma curves. Red, green, and blue can be adjusted
separately. Adjustments to white are also applied to the three other colors. Note that adjusting
any color will overwrite previous adjustments.
Use the [ ] / [ ] buttons to select a color, and then press the OK button.
Next use the [ ] / [ ] buttons to select a point on the gamma curve, and then use the [ ] /
[ ] buttons to adjust the position of the point. When adjustment is finished, press the OK
button to confirm the setting.
• [Fine-Tune Gamma] is available in image modes other than [DICOM SIM].
• [Fine-Tune Gamma] is available when HDR is set to [Off] or [Auto] and no HDR
signals are supplied.
• For details on gamma correction, see “Gamma” (P119).
• Use input signals or a test pattern for adjustment.
• Adjustment is not applied to the projected menu itself.
• Up to five adjustment values can be saved.
Adjustment values can also be saved or loaded by selecting [Save/Load].
Selecting [Adjust] for Fine-Tune Gamma applies a check mark to the [Advanced adjustment]
field at the top and adds an asterisk (*) to the adjustment value.
124
Menu Description
Light source mode
> [Image adjustment] > [Light source mode]
Reducing projection brightness reduces power consumption and fan noise.
Option
Function
Normal
Projects images at full brightness.
Quiet 1
Select to reduce brightness, or when quiet projection is required.
Quiet 2
Reduces brightness and noise further.
Fine-tune brightness. Fan speed is adjusted automatically based on
your brightness adjustments.
Use the [ ] / [ ] buttons to adjust the brightness on the Brightness
level adjustment screen that appears.
Adjust
[Brightness level] is shown when the light source mode is set to
[Adjust].
[Light source mode] is displayed when the operating mode is [Normal]. If the operating
mode (P133) is not set to [Normal], [Brightness level] appears instead of [Light source
mode].
Brightness level
> [Image adjustment] > [Brightness level]
Control the laser diode to adjust the projection brightness.
Use the [ ] / [ ]buttons to adjust the brightness.
Menu Guide
Menu Description
[Brightness level] appears instead of [Light source mode] when the operating mode
(P133) is not set to [Normal].
125
Menu Description
Reset
> [Image adjustment] > [Reset]
Restore the current image quality settings to the factory defaults.
Option
Function
OK
Resets the image adjustment settings.
Cancel
Cancels resetting of the image adjustment settings.
• Performing reset when [Image mode] is set to a profile from [User 1] to [User 5] will
restore the settings originally saved for that user profile.
• Only the setting for the combination of input signal and image mode for the current
projection is reset.
126
Menu Description
Install settings
Adjust projection to suit the screen or the type of images, or how the
projector is installed.
Menu screen when the input signal is HDMI-1
Menu
Function
Details
P128
Image flip H/V
Specify settings for projection from behind the screen,
from the ceiling, or both.
P128
Zoom
Digitally reduce images when lenses not equipped
with optical zoom are attached.
P128
Keystone
Set the type of keystone correction.
P129
Professional settings
Specify advanced installation settings.
P129
Lens - Position
Store information about the lens position (including
focus, zoom, and lens shift settings), which can be
used to restore the lens to these positions.
P137
Screen color
Adjust projection colors to suit the screen color.
P138
Iris
The aperture value can be adjusted manually.
A smaller aperture reduces brightness but improves
contrast.
P138
Test pattern
Project a test pattern to check the resolution and color
of projection during installation.
P138
Menus that are not available are grayed out.
127
Menu Description
Operation of installation-related functions can be
prohibited.
Menu Guide
Positional lock
Menu Description
Positional lock
> [Install settings] > [Positional lock]
Operation of installation-related functions can be prohibited.
•
•
•
•
Image flip H/V
Focus adjustment
Lens shift reset
Zoom adjustment
• Save position
(in [Lens - Position])
• Lens shift adjustment
Option
• Professional settings
• Zoom
• Keystone
Function
Off
The positional lock is not used.
On
Prevents adjustment of installation-related functions.
Image flip H/V
> [Install settings] > [Image flip H/V]
Specify the orientation of how the projector is installed.
Option
Function
None
Select for normal projection, without inversion.
Ceiling mounted
Select when the projector is installed upside-down on the ceiling.
The projected image is inverted in both vertical and horizontal
directions.
Rear
Select this to project an image from behind the screen.
The projected image is inverted in the horizontal direction.
Rear, Ceiling mounted
Select this to project an image from behind the screen with the
projector hung from the ceiling.
The projected image is inverted in the vertical direction.
• When mounting the projector on a ceiling, use the optional ceiling attachment (RSCL15) and ceiling-mount arm (RS-CL17). Contact the Canon Customer Support Center
for more detailed information.
• Image flipping will reset any adjustment for keystone distortion. In this case, redo the
adjustment.
• Adjusting the [Image flip H/V] setting does not alter button assignments in the
projector’s side controls.
Zoom
> [Install settings] > [Zoom]
When lenses not equipped with optical zoom are attached and if projected images
do not fit on the screen, you can display the image by electronically reducing its
size. This type of zooming reduces overall image dimensions, relative to the center
of the image.
Press the [ ] button on the remote control to project images at a reduced size, and
press the [ ] button to enlarge images to full size. Images can be projected at 75 –
100% of the original size.
128
Menu Description
• D.ZOOM buttons on the remote control cannot be used for this [Zoom] function.
• [Zoom] is not available unless [Keystone] is set to [Off].
• [Zoom] is canceled if, after setting up [Zoom], you change the [Keystone] setting to an
option other than [Off].
• Switching to lenses equipped with optical zoom will reset the setting to 100%.
Keystone
> [Install settings] > [Keystone]
Two types of keystone correction are available: horizontal/vertical keystone and
corner adjustment. Keystone correction can also be reset. Keystone correction can
also be applied by pressing the KEYSTONE button on the remote control. (P81 –
P84)
Submenu
Function
Off
Disables keystone correction.
Horizontal-vertical
keystone
Apply horizontal-vertical keystone correction. Image height and
length is adjusted.
Corner adjustment
Apply corner adjustment. Each corner of the image can be
repositioned.
Reset
Resets the specified keystone value.
The available horizontal-vertical keystone range may vary depending on the lens, lens
zoom position, and shift position.
Professional settings
> [Install settings] > [Professional settings]
Menu Guide
Specify advanced installation settings.
129
Menu Description
Menu screen when the Ultra-wide Zoom Lens (RS-SL06UW) or Standard 4K Zoom
Lens (RS-SL07RST) is attached
Menu Description
EDID mode setting
Switch to a mode for compatible signals, as registered in the HDMI-1 or HDMI-2 EDID.
Submenu
HDMI-1
EDID mode
HDMI-2
EDID mode
Function
Option
Function
Wide
bandwidth
(4K60Hz)
Wide-bandwidth 9–18 Gbps signals (such as 8-bit 4K
YCbCr 4:4:4 at 60 Hz or 10-bit 4K YCbCr 4:4:4 at
24 Hz) are registered in the EDID.
High
compatibility
Select in case of incorrect video or audio output when
set to [Wide bandwidth].
RGB alignment
Correct color misalignment.
Submenu
Function
Enables adjustment of misalignment in 1-pixel increments.
Submenu
Off
Function
Does not perform micro digital image shift.
Submenu
Micro-digital
image shift
Function
Adjust
Use the [ ] / [ ] buttons for
vertical shift and the [ ] / [ ]
buttons for horizontal shift.
Chart
Displays a chart to assist in
adjustment. Watch the chart as
you fine-tune the position.
Adjust
Color misalignment affecting the entire image can be corrected by
moving red, green, or blue components into position, in 1-pixel
increments.
Submenu
Off
Function
Does not perform image registration.
Submenu
Registration
Adjust
Function
Use the [ ] / [ ] buttons for
Red / Green /
vertical shift and the [ ] / [ ]
Blue
buttons for horizontal shift.
Chart
Audio is muted while the chart is shown.
130
Displays a chart to assist in
adjustment. Watch the chart as
you fine-tune the position.
Menu Description
Submenu
Function
Submenu
Off
Function
Disable local correction of color misalignment.
Display a menu for local correction of color misalignment.
Submenu
Function
Submenu
Off
Function
Disable adjustment.
Enter 5-point adjustment mode (in
screen corners and at the center).
Submenu
5-point
adjustment
Adjust
Function
Red /
Blue
Use the [ ] / [ ]
buttons for vertical
alignment and the
[ ] / [ ] buttons for
horizontal alignment.
Chart
Displays a chart to
assist in adjustment.
Watch the chart as
you fine-tune the
position.
Advanced
registration
Adjust
Reset
Function
Red /
Green /
Blue
Use the [ ] / [ ] buttons for
vertical alignment and the [ ] / [ ]
buttons for horizontal alignment.
Chart
Displays a chart to assist in
adjustment. Watch the chart as
you fine-tune the position.
Restore the original position, before
adjustment.
131
Menu Description
Manual
adjustment
Submenu
Menu Guide
Precise adjustment based on 54 points (in a
6 x 9 grid).
Menu Description
Submenu
Advanced
registration
Function
• With advanced registration, checkered or halftone image areas
may be affected by uneven colors or image artifacts.
• 5-point adjustment enables basic correction of color
misalignment across the screen, by moving adjustment points
in the center and each corner. To correct registration only in
certain areas, try manual adjustment.
• Any values you set in 5-point adjustment are retained if you
subsequently perform manual adjustment. For more precise
correction after 5-point adjustment, perform manual
adjustment.
• Any manual adjustment values you set before switching to
5-point adjustment are cleared.
• [Advanced registration] setting values are not cleared if you
switch lenses. However, on startup after you switch lenses, a
message is displayed requesting you to confirm advanced
registration settings if, for any adjustment point, [Advanced
registration] setting values differ from defaults.
Partial distortion correction
Precise correction of partial distortion of projected images based on 54 points (in a 6 × 9 grid).
For detailed instructions, refer to “Adjusting Projected Images with Partial Distortion
Correction” (P89).
Option
Off
Function
Disables partial distortion correction.
Submenu
Adjust
Reset
Function
Adjust
Using an adjustment point selected with the [ ] / [ ] /
[ ] / [ ] buttons, press the [ ] / [ ] / [ ] / [ ]
buttons to align vertically and horizontally.
Chart
Displays a chart to assist in adjustment. Watch the
chart as you fine-tune the position.
Reset the marker settings.
With partial distortion correction, checkered or halftone image areas may be affected
by image artifacts.
132
Menu Description
High altitude
Switch the fan mode to suit installation at low or high altitudes (above 2,300 m [7,545.8']).
Option
Function
Off
Setting for altitudes lower than 2,300 m (7,545.8').
On
Setting for altitudes of 2,300 m (7,545.8') or higher.
Incorrect settings may shorten the useful life of the projector components.
Operating mode
Switch the method of controlling the light source and fan.
Option
Function
Normal
Normal drive mode. Brightness will decrease with time.
Fixed brightness
Maintains nearly the same brightness set at installation. Laser diode
wear is detected by a sensor, and current is increased to compensate
for wear.
Long duration 1
Enables a relatively longer useful life of optical parts by reducing the
brightness level of the light source mode and regulating the fan drive.
Long duration 2
Enables an even longer useful life of optical parts by further reducing
the brightness level of the light source mode and more aggressively
regulating the fan drive.
When using the projector continuously for 24 hours or more, or when turning the
projector off by unplugging it, execute light source calibration using one of the settings
below. If calibration is not executed, the projector will be unable to maintain fixed
brightness.
• Periodically specify [OK] in [Light source calibration] in [Calibration] (P155).
• Specify CALIBRATION in [Schedule] (P152).
Switch the available lens shift range as needed.
Option
Function
Normal
Provides a normal lens shift range.
Expanded
Provides an expanded lens shift range.
133
Menu Description
• Selecting [Expanded] may lower image quality and keystone correction precision,
depending on the extent of lens shift.
• Selecting [Normal] when the lens is in the expanded range (outside the normal
position) will execute lens shift reset (P137).
Menu Guide
Lens shift mode
Menu Description
Marginal focus
In dome projection, image focus can be adjusted on the edges of the screen, and the
remote control can be used to activate and deactivate this focus adjustment. For detailed
instructions, refer to “Adjusting Peripheral Focus” (P93).
Option
Function
Off
Disable remote focusing of image edges.
On
Enable remote focusing of image edges. To access the adjustment
window, press the LENS button on the projector twice or press the
FOCUS button on the remote twice.
Reset
Restore edge focusing to the standard position.
• The marginal focus feature is not available depending on the type of lens installed.
• Setting this function to [Off] only prevents display of the adjustment window.
Adjustment values are still retained. Use this setting to prevent remote focusing of
image edges.
Edge blending
Brightness and colors of overlapping edges of images from multiple projectors, which form a
blending area, can be adjusted for a more seamless appearance. For detailed instructions,
see “Projecting from Multiple Projectors at Once (Edge Blending)” (P96).
Option
Function
Off
Disable blending.
Adjust
Display the menu for blending area adjustment.
Start marker
End marker
Blending area
When adjusting the image
projected from the right side
• Adjustment may not eliminate different colors or brightnesses in the blending area.
• For best edge-blending results, use all projectors in the same image mode and make
the following adjustments.
(1) Brightness, contrast, R/G/B gain and offset, black level, blending color, color
temperature, color level, color balance, sharpness, and gamma (P119)
(2) Color adjustment, by using 6-axis color adjustment (P123)
(3) Gamma adjustment, by using fine-tune gamma (P124)
(4) Corner adjustment, by using keystone correction (P129)
134
Menu Description
Submenu
Function
Left / Right /
Top /
Bottom
Select the direction of the blending area to adjust.
Width
Specify the width between the start and end markers.
Start
position
Moves the position of the start marker.
Side
• Large blending areas may cover input signal dialog boxes
and other interface elements. In this case, momentarily set
edge blending to [Off] and check the display.
• Although the starting marker is normally aligned with the
image edge, it can also be aligned toward the center of the
image. In this case, the black blending area will lie outside of
the starting marker.
Adjust unwanted colors or discrepancies between colors in the
blending area.
Submenu
Off
Function
Do not adjust colors of blended images.
Adjust unwanted colors or discrepancies between
colors in the blending area.
Color blending
adjustment
Option
Adjust
White
Function
Simultaneously adjust red, green,
and blue to correct unwanted
colors or discrepancies in the
blending area.
Menu Guide
Individually adjust red, green, and
Red / Green /
blue to correct unwanted colors or
Blue
discrepancies in the blending area.
Menu Description
135
Menu Description
Submenu
Function
Because black is lighter in the blending area than in other areas, you
can adjust the black level outside the blending area to make this
difference in brightness less noticeable.
Position of end
marker (hidden)
Left image
Area A: Black level cannot be adjusted.
Area B: Adjust to a black level different
from that of area D.
Area C: Adjust to provide a smooth
transition relative to the black
levels of areas B and D.
CBA
Area D
Blending area
Areas C - A (default: 0)
Option
Off
Function
Do not adjust the black level.
Submenu
Black level
adjustment
Function
Option
Function
Adjust areas C - A to smoothen the
boundaries of the blending area.
Option
Area
Adjust
Side
Function
Select the direction to
adjust from Left / Right /
Top / Bottom.
A-Width /
Adjust the widths of areas
B-Width /
A - C.
C-Width
Adjustment
type
Adjust the black level brightness and
color of areas B and D.
Option
Black
level
136
Function
B/D-area Adjust the black level
base
brightness of B/D areas.
B/D-area
red /
green /
blue
Adjust the red, green, and
blue components of B/D
area black levels
individually.
Menu Description
Submenu
Function
Show the blending area markers.
Option
Marker
Reset
Function
Off
Hide the blending area markers.
On
Show the blending area markers. The start marker is
red, and the end marker is green.
Reset the marker settings.
Lens - Position
> [Install settings] > [Lens - Position]
The projector can save information about the lens position in memory. Up to three
sets of lens information (including focus, zoom, and lens shift settings) can be
saved, and the lens can be restored to these positions.
Submenu
Function
Load position 1 – 3
Restores the lens to the positions saved using Save position 1 – 3.
Save position 1 – 3
Saves the lens position as Save position1 – 3.
Restores the lens to the preset position.
Lens shift reset
• The preset position differs depending on the type of lens.
• The preset position also changes when the orientation of the
projector is changed, due to the ceiling mounted setting, etc.
Example: [+50%, 0%] > [-50%, 0%]
Menu Description
137
Menu Guide
• To lock (protect) the saved position, set [Positional lock] (P128) to [On].
• The values of the following settings are saved in addition to the lens position
information (including focus, zoom, and lens shift settings):
- Horizontal-vertical keystone / Corner adjustment
- Screen color
- Zoom
• [Load position] is not available unless you perform [Save position] once.
• The original lens position varies depending on the type of lens used.
• When saved lens positions are restored, images may be projected in a slightly different
position than the saved position.
• Specifying a somewhat smaller image size than the screen size (image area) enables
you to switch among multiple lens positions without having the image extend off the
screen.
• When precise positioning is needed, use lens shift, zoom, and focus functions for fine
adjustment.
Menu Description
Screen color
> [Install settings] > [Screen color]
You can adjust the color quality of the images projected according to the color of
the projection screen.
Submenu
Function
Normal
Select this if a standard type of projection screen is used. The images
are projected in a light quality similar to that of natural light.
Greenboard
Select if a dark green surface such as a blackboard is used as the
screen. The color quality similar to [Normal] is obtained on the
greenboard.
Adjust
Select to fine-tune red, green and blue.
Iris
> [Install settings] > [Iris]
Use this feature for projection emphasizing contrast over brightness.
Submenu
Open
Function
Disables aperture adjustment.
Specify the aperture value manually.
Adjust
The [Iris] setting does not affect power consumption.
Test pattern
> [Install settings] > [Test pattern]
You can project a test pattern (P92) to check resolution, color, and other details
even without supplying an input signal. Also available by pressing the TEST
PATTERN button on the remote control.
Option
Function
Off
Disable test pattern display.
On
Enable test pattern display.
• While the test pattern menu is displayed, you can use the [ ] / [ ] buttons to switch
patterns. Additionally, options of test pattern that have options can be changed with the
[ ] / [ ] buttons.
• The test pattern menu is no longer displayed after a little while, but you can view it
again by pressing the [ ] / [ ] buttons.
138
Menu Description
System settings
Customize projector and remote control operation, beeping, and other
details after startup, during standby, and in other situations.
Menu screen when the input signal is HDMI-1
Menu
Function
Details
P140
On screen
Set the display position and whether to show or hide
menus, help information, and warning or caution
icons.
P141
Remote control/Side
control
Specify operation with remote control or projector
buttons.
P143
Audio in terminal select
Select the terminal for audio input.
P145
HDBaseT signal quality
Display the video signal quality of HDBaseT input.
P146
Communication settings
Configure Extron XTP and serial communication
settings.
P146
Power supply settings
Specify how power is managed at startup, in standby,
and when no signal is supplied.
P147
Motion blur reduction
Motion blur is blurring that occurs during video
playback. Motion blur reduction can make this blurring
less noticeable.
P149
Language
You can select the language in which the menus are
displayed.
P149
Other settings
Set a password, check the air filter replacement
timing, and access other settings and information.
P150
Menus that are not available are grayed out or hidden.
139
Menu Description
Customize user screens shown at startup, when no
signal is detected, and in other situations.
Menu Guide
User screen settings
Menu Description
User screen settings
> [System settings] > [User screen settings]
Capture a logo and specify logo display settings.
Logo capture
Registers the current image as a user logo. Registered user logos can be shown when no
signal is received, when the BLANK button is pressed, or as the startup image.
Option
Function
OK
Display the image for logo registration.
Align the image with the red boundary lines indicating the portion that
will be stored, and then press the OK button. The portion of the image
within the boundary lines is now registered.
Cancel
Cancels logo registration.
Logo position
Specify the position of registered user logos.
You can specify the position after a logo has been registered. Choose from upper left, upper
right, center, lower left, or lower right.
No signal screen
Customize the screen shown when no input signals are received.
Option
Function
Black
The screen is all black.
Blue
The screen is all blue.
User logo
The user logo is projected.
Screen when blank
Select the screen shown when projection is temporarily blanked out by pressing the BLANK
button on the remote control.
Option
Function
Black
The screen is all black.
Blue
The screen is all blue.
Light source off
The light source is turned off.
User logo
The user logo is projected.
140
Menu Description
Projector on
Select a logo to project after startup until input signals can be projected.
Option
Function
Skip
A black screen is projected.
Canon logo
Displays the Canon logo that was registered in advance at the factory.
User logo
The user logo is projected.
On screen
> [System settings] > [On screen]
Specify display details for on-screen menus, help, and warning or precaution icons.
Menu position
Reposition menu display.
Choose from upper left, upper right, center, lower left, or lower right.
Only [Center] is available when edge blending is used. Other display positions are
grayed out and not available.
Extend menu display from the standard 10 or 30 seconds to 3 minutes.
Option
Function
Normal
The menu is displayed for 10 or 30 seconds.
Extended
The menu is displayed for 3 minutes.
Menu Guide
Menu display time
Menu Description
141
Menu Description
The following display times are also changed.
Item
[Normal]
[Extended]
- Menu screen
- Edge blending (P134)
30 seconds 3 minutes
-
10 seconds 3 minutes
Input (P42)
Keystone (P81)
Keystone reset (P84)
Focus (P43)
Zoom (P43)
Lens shift (P58)
Lens shift reset (P60)
Marginal focus (P93)
Aspect (P113)
Image mode (P118)
Volume (P29, P34)
Gamma (P119)
Menu rotation
Rotate menu display. When projecting in portrait orientation, for example, with the projector
installed at a 90° angle, specify the orientation of projected menus to align them with the top
or bottom of projected images.
Option
Function
Auto
Automatically rotates menus as needed after using an accelerometer
to determine if the projector is installed in portrait orientation (90°
clockwise or counterclockwise) or horizontally.
Off
Menus are not rotated. Menus are shown in a readable orientation for
projectors installed horizontally.
90 degrees
counterclockwise
90 degrees
clockwise
Menus are rotated 90°. Menus are shown in a readable orientation for
projectors installed in portrait orientation (90° clockwise or
counterclockwise).
• To determine the orientation of menu rotation, projector orientation is detected
immediately after startup or when this setting is switched to [Auto].
• Menus are not rotated automatically in response to changes in projector orientation
during projection.
Guide
Shows the guide screen.
Option
Function
Off
Hides the guide screen.
On
Shows the guide screen.
The guide screen is shown at the following cases.
• No input signal is detected.
• An invalid button is pressed in [BLANK] or [FREEZE] mode (P33).
• When positional lock (P128) is set to [On] and buttons locked by this feature are
pressed.
142
Menu Description
Show input status
Specify whether signal status is shown when there is no signal or when you are completing
signal settings.
Option
Function
Off
The input status is not displayed.
On
The input status is displayed.
Air filter warning display
Shows a warning to replace the air filter when replacement is required.
Option
Function
Off
The air filter warning is not displayed.
On
The air filter warning is displayed.
Setting [Air filter warning display] to [Off] will disable display of the warning to replace
the air filter. We recommend checking the air filter counter (P156) occasionally to know
when to replace the filter.
Overheat warning display
Specify whether the icon warning of high temperature (
temperature is high and the projector may overheat.
Option
) is shown when the internal
Function
Off
Disable high temperature warning icon display.
On
Enable high temperature warning icon display.
Remote control/Side control
> [System settings] > [Remote control/Side control]
You can select whether a beep sounds or not when you operate the projector.
Option
Function
Off
Disables the beep.
On
Enables the beep.
The beep will not sound if you mute the projector sound with the MUTE button on the
remote control.
143
Menu Description
Beep
Menu Guide
Specify which operations are available using buttons on the remote control or in the
projector’s side controls.
Menu Description
Key repeat
Key repeat enables projector or remote control buttons to be held down instead of pressing
them repeatedly.
Option
Function
Off
Key repeat is not enabled.
On
Key repeat is enabled.
Key lock
Lock the projector or remote (wireless) to prevent operation.
Option
Function
Off
Disables key lock. Operation is possible on the projector or from the
remote control.
Main unit
Operation is not possible using the projector.
Use the remote control.
Remote
(wireless)
Disables infrared remote control operations (P36). Use buttons on the
projector.
Operation is also possible with an optional wired remote control (RSRC05).
To Unlock Key Lock Function
Turn off the projector and unplug the power plug. Hold down the OK button on the projector
and plug in the power cord, as you continue to hold down the OK button. In a moment, a
beep will sound, and the controls will be unlocked.
When you access this setting from the projector’s side controls, [Main unit] is not
available. Similarly, when you access the setting from the remote control, [Remote
(wireless)] is not available.
IR receiver settings
Select the infrared receiver of the projector.
All
Option
Function
Use both the front and the rear receivers on the projector.
Front
Use the front receiver on the projector.
Rear
Use the rear receiver on the projector.
144
Menu Description
Remote control channel
Separate channels can be assigned to up to four projectors so that a single remote control
can be used with each projector.
Selecting the Projector Channel
If a wired remote control is used, there is no need to set the remote control channel.
Option
Function
Ch1
Ch2
Select the remote control channel to use with this projector.
Ch3
Ch4
Independent
Can be controlled from a remote control set to any channel.
Selecting a Channel on the Remote Control
After changing the projector channel from the menu, always change the remote control
channel accordingly.
Ch1
Hold down both the Ch button and [1] button for 3 seconds.
Ch2
Hold down both the Ch button and [2] button for 3 seconds.
Ch3
Hold down both the Ch button and [3] button for 3 seconds.
Ch4
Hold down both the Ch button and [4] button for 3 seconds.
Independent
Hold down both the Ch button and [0] button for 3 seconds.
[INPUT A-C] button settings
Select input signals to assign to INPUT A-C buttons on the remote control. This enables
direct selection of the input signals.
Option
INPUT A
INPUT B
Choose from the following input signals to assign: [Disable], [HDMI-1],
[HDMI-2], [DP-1], [DP-2], [HDBaseT] or [DP 1x2].
Menu Guide
INPUT C
Function
Audio in terminal select
> [System settings] > [Audio in terminal select]
Submenu
HDMI-1
Function
Select the terminal for audio input.
Option
HDMI-2
DP-1
Function
Off
No audio is output.
HDMI-1
Audio signals from HDMI-1 are output.
DP-2
HDMI-2
Audio signals from HDMI-2 are output.
DP-1
Audio signals from DP-1 are output.
HDBaseT
DP-2
Audio signals from DP-2 are output.
HDBaseT
Audio signals from HDBaseT are output.
DP 1x2
145
Menu Description
Select the terminal for audio input used with various input signals.
Menu Description
HDBaseT signal quality
> [System settings] > [HDBaseT signal quality]
Display the video signal quality of HDBaseT input. The HDBaseT input signal value
received is indicated by a white line.
High
Indicated by the green portion. This is the recommended level.
Middle
Indicated by the yellow portion. The signal is fluctuating. Check the cable.
Low
Indicated by the red portion. The signal cannot be used. Fix the cable connection
or replace the cable.
Do not coil or bundle cables.
Communication settings
> [System settings] > [Communication settings]
View or configure communication setting values for the service port or HDBaseT
serial communication.
Submenu
Extron XTP
Function
Specify whether to connect to Extron XTP transmitters when
connected via HDBaseT.
Select ports used for serial communication. Otherwise, you can
refer to this setting to check setting values for the port selected for
serial communication.
Option
Serial communication
Function
Service port
Use the service port (CONTROL).
HDBaseT
Use the HDBaseT port.
Detail
Display baud rate, data bits, and parity, and
change the stop bit (switch between 1 or
2 bits).
146
Menu Description
Submenu
Function
Log, show, hide, or clear user commands.
Command monitor
You can log and view the type, execution time, and IP address
(limited to the last octet at the time of reception) of sent and
received user commands.
Option
Off
On
Display
Clear
Function
Disable user command logging.
Enable user command logging.
Show the user command log.
Clear the entire user command log.
Power supply settings
> [System settings] > [Power supply settings]
Specify how power is managed at startup, in standby, and when no signal is
supplied.
Menu Guide
Specify network function operating status in standby mode.
Option
Function
Normal
All network functions are available when network functions are
enabled, including the web screen and PJLink.
Low-power
All functions are disabled except for some wired LAN functions (such
as operations over a network).
• [Standby power setting] is set to [Normal] and cannot be changed when scheduling
is enabled (P152).
• [Standby power setting] is set to [Normal] and cannot be changed when wireless
LAN is enabled (P160).
147
Menu Description
Standby power setting
Menu Description
Quick startup
Enable faster startup next time by leaving some circuits on for 90 minutes after the projector is
turned off. However, to avoid sudden surges in intensity, projection is delayed by at least
approximately 1.7 seconds.
Option
Function
Off
Disable quick startup.
On
Enable quick startup.
Power management mode
Specify to turn the light source off or enter standby if there is no input signal. This feature
automatically turns off the light source or power after a certain period if the remote control or
projector is not operated.
Option
Function
Disabled
Disable power management mode.
Light source off
Only turns the light source off.
Standby
Turns the projector off and puts it in standby.
• Projection resumes when the same input signal is restored, when the remote control
or projector is operated, or when user commands are sent to turn the projector on.
• After the projector enters standby, restoring projection requires the same steps as
when turning the projector on normally.
• When [Disabled] is selected, [Direct power on] is not available.
Power management duration
Specify how much time must pass before the light source goes off or the projector enters
standby mode, depending on the [Power management mode] setting.
Option
Function
5 min. – 60 min.
After 30 seconds without an input signal when the projector is idle, the
projector starts displaying a countdown of the selected time.
• Can be set to 5 min., 10 min., 15 min., 20 min., 30 min., or 60 min.
• If conditions that would start countdown are met while you are blanking projection,
blanking is canceled.
Direct power on
You can turn on the projector by connecting the power cable without pressing the POWER
button.
Option
Function
Off
The POWER button must be pressed to turn the projector on.
On
You can turn on the projector by connecting the power cable only.
• Before enabling direct power on, be sure to set [Power management mode] to an
option other than [Disabled]. When [Disabled] is selected, [Direct power on] is not
available.
• The projector is also equipped with a Direct Power Off feature. No damage is caused
to the projector even if it is unplugged during projection to turn it off without pressing
the POWER button. However, setting adjustments made immediately before
unplugging the projector may not be stored.
148
Menu Description
Motion blur reduction
> [System settings] > [Motion blur reduction]
Motion blur is blurring that occurs during video playback. Motion blur reduction can
make this blurring less noticeable.
Option
Function
Off
Motion blur reduction is not performed.
Weak
Reduce motion blur for fast-moving images. Note that images may
be slightly darker, and flickering may occur.
Strong
Reduce motion blur for images moving faster than with [Weak].
Note that images may be darker, and flickering may occur.
• If setting the projector to [Strong] or [Weak] produces distracting flickering, set it to [Off].
• [Motion blur reduction] is not available in [DICOM SIM] image mode. The menu is
grayed out.
Language
> [System settings] > [Language]
Select the menu display language.
Language
Czech
German
Dutch
Danish
French
Finnish
Arabic
Italian
Norwegian
Chinese (Simplified)
Spanish
Turkish
Chinese (Traditional)
Portuguese
Polish
Korean
Swedish
Hungarian
Japanese
149
Menu Description
Russian
Menu Guide
English
Menu Description
Other settings
> [System settings] > [Other settings]
Register a password, set a password, reset the air filter counter, schedule
operation, and access other settings and information.
Password settings
Disables the projector unless the correct password is entered.
Option
Function
Off
The projector can be used even if no password is entered.
On
The projector cannot be used unless you enter your password.
To Cancel the Password
Cancellation
on the
Projector
Turn off the projector and unplug the power plug.
Hold down the MENU button on the side control and connect the power
plug. Make sure to keep holding down the MENU button until a beep
sounds. When the projector beeps, the password is canceled. (The
entered password is also reset.)
Cancellation
To forcibly cancel the password from the remote control, in standby state
on the Remote
press the MENU button 3 times, then press the POWER button.
Control
• You cannot set [On] unless you have completed [Register password].
Once you set a password, the password entry screen appears at power-on.
Enter a 4 digit password.
Enter the password using the [ ] / [ ] / [ ] / [ ] buttons or number buttons on the
remote control.
If the password is valid, the projection starts. If you enter a wrong password three
times, the power will be turned off.
• The projector also goes off after three minutes of inactivity on the password input
screen.
150
Menu Description
Register password
You can register a password for starting projection.
Enter a 4 digit password.
Enter the password using the pointer buttons [ ] (1) / [ ] (2) / [ ] (3) / [ ] (4) or the number
buttons on the remote control.
The 4-digit password is entered from the left to right digits. When the final digit is entered, the
password is automatically registered.
Press the MENU button to abort the registration.
Date and time settings
Set time settings such as the current date and time, date/time display format, daylight saving
time, and time zone.
Submenu
Function
Set the date and time. The date and time currently set are shown and
updated each second.
The display is blank if the [Date and time] setting has not been
set.
Submenu
Date and time
Function
Date
Enter the date.
Time
Enter the time.
Enter
Confirms your entered values. At this time [Date and
time] starts operating.
• The date/time display format is set in [Date display format].
• Settings may be reset if the projector is left unplugged for an
extended period.
Choose [Year/month/date], [Month/date/year], or [Date/month/year] as
the date display format shown for the date and time, in schedules, and
elsewhere.
Adjusts the time one hour ahead at the beginning of daylight saving
time and one hour back at the end. The timing of daylight saving time
must be set in advance.
Daylight saving
time
Function
Off
Disable daylight saving time.
On
Enable daylight saving time.
Edit
Edit when daylight saving time starts and ends. Set
the month, day, and time on the editing screen shown
next for the starting and ending date/time.
[On] in [Daylight saving time] is not available until the starting
and ending timing are set.
Region
Select a city in the time zone where the projector is installed.
The time zone of the city selected in [Time zone] is shown.
151
Menu Description
Option
Menu Guide
Date display
format
Menu Description
Submenu
Function
Select whether to sync the time on the projector using SNTP (Simple
Network Time Protocol).
Submenu
SNTP
Function
On (IPv4)
Use SNTP over an IPv4 connection.
On (IPv6)
Use SNTP over an IPv6 connection.
Off
Disable SNTP.
• [SNTP] is not available when [Network (wired/wireless)] is set
to [Off/Off].
• Use the web screen to set the IP address of the SNTP server.
[SNTP] is not available unless the SNTP server IP address
has been set.
Schedule
Some projector tasks can be automated by scheduling them. As the timing of scheduled
tasks, choose from [Default], which is not during a certain period, or one of five special period
times that you set up.
The [Period] setting of a special period cannot be set to overlap with another period.
Option
Function
Default
Set a general schedule that is not during a specific period.
Special period
1–5
Set up to five specific periods to schedule operation.
• [On] is grayed out until you set the period in [Special period 1] to [Special period 5].
• [On] and [Off] are grayed out for periods in [Special period 1] to [Special period 5]
that have already passed.
• Setting any schedule to [On] changes [Standby power setting] (P147) to [Normal].
• Tasks scheduled under the [Default] setting are not executed while special period
schedules are in effect.
152
Menu Description
Detailed schedule setting
Option
Function
Off
Disable the schedule.
On
Enable the schedule.
Edit the schedule.
■ Default
Edit
Menu Guide
Menu Description
153
Menu Description
Option
Function
■ Special period
Select a day in [Day of week], and select the times, operations, and
parameters.
Submenu
Edit
Function
Period
Edit the period (start and end dates) for scheduled
operation. Note that no [Period] setting is used for the
[Default] schedule.
Day of week
Change the day of the week to edit.
Edit the tasks scheduled for your selected [Day of
week]. You can set or remove listed times,
operations, and parameters (POWER ON/OFF,
INPUT, CALIBRATION).
Edit schedule
154
Menu Description
Option
Function
Submenu
Reset
Function
Clears setting details for the selected schedule.
Setting details for [Period] and day of the week are
reset.
Copy the tasks scheduled for your selected [Day of
week] to another day in the schedule copying menu.
Edit
Copy
schedule to
different day
Calibration
Calibration adjusts the projector to compensate for changes in image quality from long-term
use or differences in the environment of use.
Submenu
Function
Option
Off
Adjust
Restore the original gamma and apply the result.
• Restoring gamma will restore tone curves and neutral colors
as closely as possible to defaults, but original projection
cannot be matched exactly.
• If Gamma restore is performed, the adjustment screen will be
projected for approximately 6 minutes.
• To stop Gamma restore, press the POWER or EXIT button.
Cancellation will return the setting to [Off].
155
Menu Description
Gamma restore
Function
Returns to the factory default without performing
Gamma restore.
Menu Guide
Restore the original gamma if, after the projector has been used for
some time, you notice that tone curves have changed, or if neutral
colors have become tinted. Gamma restore can only be used after
about 30 minutes of projection.
Menu Description
Submenu
Function
Use when there is concern about deterioration of the color and
luminance of the light source due to extended use.
Light source
calibration
Option
Function
OK
Execute light source calibration.
Cancel
Do not execute light source calibration.
Light source calibration can only be used after about 30 minutes of projection.
Trigger out
Operation of a screen or other external device can be triggered by turning the projector on or
off.
Option
Function
Off
No output from the trigger terminal.
Link with power
12 V of voltage output from the trigger terminal during projection. Used
to trigger operation of a screen or other external device in sync when
the projector is turned on or off.
Air filter counter
Shows a counter to remind you when to replace the air filter.
Also shows a counter reset screen.
• After air filter replacement, reset the air filter counter.
• For details on replacing the air filter, see P191 – P192.
Power counter
Indicates the total time that the projector has been connected to a power supply.
This value is not reset even if [Factory defaults] is executed.
156
Menu Description
Firmware
Update the projector firmware.
Check the version indicated before updating the firmware.
Update the projector firmware as follows.
1. Download updated firmware from the Canon website and store it at the root directory on a
USB flash drive.
2. Insert the USB flash drive in the USB port.
3. Follow the instructions shown to complete the update process.
• Firmware versions shown here are for illustration only and differ from actual
versions.
• In some cases, it may not be possible to download updates. For details, contact the
Canon Customer Support Center.
• Firmware updating takes a few minutes. During the update, the LED indicator will
flash in red. Do not turn off the projector while the LED is flashing. After the update,
the projector will automatically turn itself off and enter standby mode.
Factory defaults
You can reset the menu item settings and restore the system settings to the factory defaults.
Option
Function
OK
Settings are reset to default.
Cancel
Settings are not reset to default.
Menu Guide
Menu Description
157
Menu Description
Network settings
Settings described in this section apply to wired and wireless network
connections, setting a network password, and other aspects of networked
projection.
Menu screen when the input signal is HDMI-1
Menu
Function
Details
Network settings lock
Lock or unlock network settings, depending on
whether you wish to prevent changes.
P159
Network password
setting
Activate or deactivate password protection for
network settings.
P159
Register network
password
Set a network password.
P159
Network (wired/
wireless)
Enable or disable wired or wireless network
connectivity and the mode of operation.
P160
Detailed settings (wired)
Display and set advanced settings for wired
connections.
P161
Detailed settings
(wireless)
Display and set advanced settings for wireless
connections.
P165
PJLink*
Enable or disable PJLink.
P170
AMX Device Discovery*
Enable or disable AMX Device Discovery.
P171
Crestron RoomView*
Enable or disable Crestron RoomView.
P171
Information
Display network information.
P172
Menus that are not available are grayed out or hidden.
* Only available for wired connections.
158
Menu Description
Network settings lock
> [Network settings] > [Network settings lock]
You can lock/unlock the network settings so that they cannot be changed.
Option
Function
Unlock
Cancels the lock and allows other network settings to be changed. The
password must be entered in order to cancel the lock. Use the [ ] / [ ] /
[ ] / [ ] buttons or number buttons on the remote control to enter the
4-digit network password.
Lock
Lock the settings.
• Forcibly canceling the network lock
Press these buttons in the following order to cancel the lock: [ ] [OK] [ ] [OK] [ ]
[OK]. This operation resets the network password to [ ] [ ] [ ] [ ] ([1] [1] [1] [1]).
• Setting [Network password setting] to [Off] leaves network settings unlocked.
Network password setting
> [Network settings] > [Network password setting]
You can set whether or not a password is required in order to change the projector
network settings.
Option
Function
Off
A network password is not used.
On
A network password is used.
Register network password
> [Network settings] > [Register network password]
Menu Guide
Use the [ ] / [ ] / [ ] / [ ] buttons or number buttons on the remote control to enter
the projector network password.
Menu Description
159
Menu Description
Network (wired/wireless)
> [Network settings] > [Network (wired/wireless)]
Enable or disable wired or wireless network connectivity and the mode of operation.
Specifying [Off] can save energy.
Option
Function
Off/Off
Disable the network function.
On/Off
Enable only wired networking.
On/On (Pj AP)
Enable both wired and wireless (PJ AP mode) networking.
Off/On (Pj AP)
Enable only wireless (PJ AP mode) networking.
Off/On (Infra)
Enable only wireless (infrastructure mode) networking.
Notes When Connected Wirelessly
A message is displayed at the initial startup in PJ AP mode (P66) requesting that you
check security key settings.
160
Menu Description
Detailed settings (wired)
> [Network settings] > [Detailed settings (wired)]
Display and manually change the wired IP address, gateway address, and other
settings. Available only when wired networking is [On].
Menu
MAC address
Function
Wired MAC address of the projector.
Configure details of the projector’s wired LAN (IPv4) function.
Submenu
Detailed IPv4
address settings
Function
IP address
IP address of the wired LAN (IPv4).
Subnet mask
Subnet mask of the wired LAN (IPv4).
Gateway
address
Gateway address of the wired LAN (IPv4).
Function
Disables the DHCP function. TCP/IP
settings can be configured manually.
On
Enables the DHCP function.
Searches the DHCP server. It will no
longer be possible to enter TCP/IP
manual settings (IP address, subnet
mask, and gateway address),
because the IP address is acquired
from the DHCP server.
DHCP
161
Menu Description
Off
Menu Guide
Option
Menu Description
Menu
Function
Submenu
Function
Change or specify the IP address, subnet mask, and
gateway address used for connections.
Detailed IPv4
address settings
TCP/IP
settings
• This menu is not available (grayed out)
when [DHCP] (P161) is [On].
• If an invalid value is entered, “Invalid entry.”
is displayed. In this case, enter a valid
value.
• When [Network (wired/wireless)] is set to
[On/On (Pj AP)], “Cannot set identical
segment IP” is displayed if you specify the
same subnetwork as in PJ AP mode. Enter
a different subnetwork, or change [Network
(wired/wireless)] to [On/Off] before entering
the wired IP address again.
Option
IPv6
Function
Off
Disables the projector’s wired LAN (IPv6) function.
On
Enables the projector’s wired LAN (IPv6) function.
[Detailed IPv6 address settings] is now available.
162
Menu Description
Menu
Function
Configure details of the projector’s wired LAN (IPv6) function.
Submenu
Detailed IPv6
address settings
Function
Link local
Link-local address of the wired LAN (IPv6).
Auto
Automatic addresses (up to 5) of the wired LAN (IPv6).
Manual
Manual address of the wired LAN (IPv6).
Gateway
Gateway address of the wired LAN (IPv6).
Auto settings
Enable/disable automatic address setting of the wired
LAN (IPv6).
Manually configure settings of the wired LAN (IPv6).
Change or specify the IPv6 address, prefix length, and
gateway address.
Menu Guide
Manual
settings
163
Menu Description
If an invalid value is entered, “Invalid entry.” is
displayed. In this case, enter a valid value.
Menu Description
Menu
Network setting
initialization
Function
The following network settings are initialized.
Settings configured from the projector menu
• Network settings lock (P159)
• Network password setting (P159)
• Register network password (P159)
• Network (wired/wireless) (P160)
• Detailed settings (wired) (P161)
- Detailed IPv4 address settings (P161)
- DHCP (wired LAN (IPv4)) (P161)
- TCP/IP settings (P162)
- IP address (wired LAN (IPv4)) (P161)
- Subnet mask (wired LAN (IPv4)) (P161)
- Gateway address (wired LAN (IPv4)) (P161)
- IPv6 (P162)
- Detailed IPv6 address settings (P163)
- Auto settings (P163)
- Manual settings (P163)
- IP address (wired LAN (IPv6)) (P163)
- Prefix length (P163)
- Gateway address (wired LAN (IPv6)) (P163)
• PJLink (P170)
• AMX Device Discovery settings (P171)
• Crestron RoomView settings (P171)
Settings configured from the web screen
• [Password] (P174)
• [Wired] (P180)
- IPv4
- DHCP (P180)
- IP address (P180)
- Subnet mask (P180)
- Default gateway (P180)
- IPv6
- IPv6 (P181)
- Autoconfiguration (P181)
- IP address (P181)
- Prefix length (P181)
- Default gateway (P181)
• [Mail] (P185)
• [SNMP] (P187)
• [Projector info.] (P188)
• [PJLink] (P188)
164
Menu Description
Detailed settings (wireless)
> [Network settings] > [Detailed settings (wireless)]
Display and manually change the wireless IP address, gateway address, and other
settings. Available only when wireless networking is [On].
Menu
Function
Mode
Shows the wireless connection mode (P66).
SSID
Shows the access point SSID.
Security
Shows the security setting.
Channel
Shows the channel used for the connection.
Signal strength
Shows actual signal strength, as measured.
MAC address
Wireless MAC address of the projector.
Select the method of connection in infrastructure mode.
Submenu
Function
165
Menu Description
PIN
Connect in PIN mode.
Following the instructions shown, enter the displayed
8-digit PIN code on the wireless base station (access
point), and, within 10 minutes, select [OK] on the
screen.
Wi-Fi Protected
Setup
Menu Guide
PBC
Connect in PBC (push-button) mode.
Following the instructions shown, press the button on
the wireless base station (access point), and, within
2 minutes, select [OK] on the screen.
Menu Description
Menu
Function
Manually specify the projector’s wireless settings.
Submenu
Mode
Function
Shows the wireless connection mode (P66).
A list of available access point SSIDs is displayed. You
can find available access points nearby or use the
keyboard to enter an access point SSID.
Manual settings
SSID
Security
Select the wireless security from [Open], [WEP],
[WPA2 AES], or [WPA/WPA2 TKIP/AES]. In PJ AP
mode, choose from [Open] or [WPA2 AES].
Channel
Shows the current wireless channel (1 – 11).
Key ID
Select the wireless WEP key ID. Only available for
when security is set to [WEP].
Key type
Select the wireless security key input type. Not
available when security is set to [Open].
Key
Enter the wireless security key.
Not available when security is set to [Open].
Apply
Connect with the current settings.
166
Menu Description
Menu
Function
Configure details of the projector’s wireless LAN (IPv4) function.
Submenu
Function
IP address
IP address of the projector’s wireless LAN (IPv4).
Subnet mask
Subnet mask of the projector’s wireless LAN (IPv4).
Gateway
address
Gateway address of the projector’s wireless LAN
(IPv4).
Enable or disable wireless DHCP on the projector.
Option
Detailed IPv4
address settings
Function
Off
Disables the DHCP function. TCP/IP
settings can be configured manually.
On
Enables the DHCP function.
Searches the DHCP server. It will no
longer be possible to enter TCP/IP
manual settings (IP address, subnet
mask, and gateway address),
because the IP address is acquired
from the DHCP server.
DHCP
Configure the projector’s wireless TCP/IP settings.
TCP/IP
settings
Menu Guide
• This menu is not available (grayed out)
when [DHCP] is [On].
• If an invalid value is entered, “Invalid entry.”
is displayed. In this case, enter a valid
value.
Menu Description
167
Menu Description
Menu
Function
Option
IPv6
Function
Off
Disables the projector’s wireless LAN (IPv6) function.
On
Enables the projector’s wireless LAN (IPv6) function.
[Detailed IPv6 address settings] is now available.
IPv6 connectivity is not available in PJ AP mode (P160). The
[IPv6] and [Detailed IPv6 address settings] menus are grayed
out.
Configure details of the projector’s wireless LAN (IPv6) function.
Submenu
Detailed IPv6
address settings
Function
Link local
Link-local address of the wireless LAN (IPv6).
Auto
Automatic addresses (up to 5) of the wireless LAN
(IPv6).
Manual
Manual address of the wireless LAN (IPv6).
Gateway
Gateway address of the wireless LAN (IPv6).
Auto settings
Enable/disable automatic address setting of the
wireless LAN (IPv6).
Manually configure settings of the wireless LAN (IPv6).
Change or specify the IPv6 address, prefix length, and
gateway address.
Manual
settings
If an invalid value is entered, “Invalid entry.” is
displayed. In this case, enter a valid value.
168
Menu Description
Menu
Network setting
initialization
Function
Menu Guide
The following network settings are initialized.
Settings configured from the projector menu
• Network settings lock (P159)
• Network password setting (P159)
• Register network password (P159)
• Network (wired/wireless) (P160)
• Detailed settings (wireless) (P165)
- Detailed IPv4 address settings (P167)
- DHCP (wireless LAN (IPv4)) (P167)
- TCP/IP settings (P167)
- IP address (wireless LAN (IPv4)) (P167)
- Subnet mask (wireless LAN (IPv4)) (P167)
- Gateway address (wireless LAN (IPv4)) (P167)
- IPv6 (P168)
- Detailed IPv6 address settings (P168)
- Auto settings (P168)
- Manual settings (P168)
- IP address (wireless LAN (IPv6)) (P168)
- Prefix length (P168)
- Gateway address (wireless LAN (IPv6)) (P168)
Settings configured from the web screen
• [Password] (P174)
• [Wireless] (P182)
- IPv4
- DHCP (P182)
- IP address (P182)
- Subnet mask (P182)
- Default gateway (P182)
- IPv6
- IPv6 (P183)
- Autoconfiguration (P183)
- IP address (P183)
- Prefix length (P183)
- Default gateway (P183)
• [Mail] (P185)
• [Projector info.] (P188)
Menu Description
169
Menu Description
PJLink
> [Network settings] > [PJLink]
You can enable or disable the PJLink network function of the projector.
When the function is turned on, control is possible via the network using commands
that meet PJLink standards.
Option
Function
Off
Disables the PJLink function.
On
Enables the PJLink function.
• The projector conforms to Class 2 as defined in PJLink standards established by the
Japan Business Machine and Information System Industries Association (JBMIA). This
projector supports all commands that are defined by PJLink Class 2, and PJLink
compatibility has been verified.
- The port number for PJLink command transmission is 4352 (TCP).
- The port number for PJLink device searching is 4352 (UDP).
- For details on using PJLink, see “Setting PJLink [PJLink]” (P188).
Sources and corresponding input terminals
Input source number
31
32
33
34
35
51
Input signal name
HDMI-1
HDMI-2
DP-1
DP-2
DP 1x2
HDBaseT
What is PJLink?
It allows centralized control of projectors and operation from a controller for all projectors
regardless of manufacturer.
The objective is for JBMIA to improve convenience for users and expand the use of
projectors through early systemization for network monitoring and control of projectors,
which will become the mainstream in the future.
Class 1: Standardization of control and monitoring specifications for basic projector
functions
Class 2: Standardizes commands added to Class 1, device searching, state notification,
and IPv6 support.
For PJLink specifications, visit the Japan Business Machine and Information System
Industries Association website.
PJLink website: http://pjlink.jbmia.or.jp/english/
170
Menu Description
AMX Device Discovery
> [Network settings] > [AMX Device Discovery]
This setting enables other equipment compatible with AMX Device Discovery to
detect the projector over a network. For networks without AMX Device Discovery,
select [Off].
Option
Function
Off
Disables AMX Device Discovery.
On
Enables AMX Device Discovery. The projector will periodically
send out AMX beacon packets over the network.
• For details on AMX Device Discovery, visit the AMX website.
http://www.amx.com
Crestron RoomView
> [Network settings] > [Crestron RoomView]
Crestron RoomView enables centralized management of multiple projectors over a
network. Networked projectors can be remotely controlled to troubleshoot issues,
or turn the projectors on or off. Specify whether to use Crestron RoomView.
Option
Function
Off
Disable Crestron RoomView.
On
Enables Crestron RoomView. A port for RoomView will be
opened, and the projector will respond to CIP packets.
Communication is possible via the RoomView Express/Server
application or via Crestron Controller (P189).
Menu Guide
• For details on Crestron RoomView, visit the Crestron® website.
http://www.crestron.com
Menu Description
171
Menu Description
Information
> [Network settings] > [Information]
Shows network information.
Menu
Function
E-mail sender address
Sender e-mail address for sending error messages (P185).
E-mail recipient address
[Already set] or [Not set] is shown, indicating whether a
recipient e-mail address has been set for error messages
(P185).
Detailed
information
(wired)
Detailed
information
(wireless)
IPv4
IPv6
IP address of the wired LAN (IPv4).
Link local
Link-local IP address of the wired LAN (IPv6).
Auto
Automatic IP address of the wired LAN (IPv6).
Manual
Manual IP address of the wired LAN (IPv6).
Link local
Link-local IP address of the wireless LAN (IPv6).
Auto
Automatic IP address of the wireless LAN (IPv6).
Manual
Manual IP address of the wireless LAN (IPv6).
IPv4
IPv6
IP address of the wireless LAN (IPv4).
• [Detailed information (wired)] menu information is displayed when [Network (wired/
wireless)] is set to [On/*].
• [Detailed information (wireless)] menu information is displayed when [Network (wired/
wireless)] is set to [*/On].
172
Menu Description
Checking Projector Information
You can check information about the signal types of the images projected
and other information.
Menu
Function
Model name
Shows the model name.
Input signal
Details of the input signal currently selected
Information such as the type, resolution, frequency, and color
format of the signal is displayed.
Firmware
Current firmware version
Serial no.
Serial number unique to this projector
Shows the total time the projector has been on.
IP address (wired)*
IP address (IPv4) for wired connections.
IP address (wireless)*
IP address (IPv4) for wireless connections.
Projector name*
Name which identifies this projector on the network
Comments*
Comments such as the location in which the projector is installed
are displayed (P188).
System information ID
System information. Normally this is not displayed.
* No value is displayed when [Network (wired/wireless)] is set to [Off/Off].
Some values may not be displayed, depending on [Network (wired/wireless)]
settings. ( : displayed, —: not displayed)
Off/Off
IP address (wired)
—
IP address (wireless)
—
Projector name
—
Comments
—
On/Off
—
173
On/On
(Pj AP)
Off/On
(Pj AP)
Off/On
(Infra)
—
—
Menu Description
Network
(wired/wireless)
Menu Guide
Projector usage time
Projector Web Screen Menu
This section describes the projector’s web screen menu.
Setting a Password [Password]
From [Password] in the settings screen, you can set a user name and password for
web screen login. For the setting procedure, see “Network Setting” (P73).
Item
Explanation
Factory default setting
User name
When logging into the web screen,
enter the user name in 1-byte
alphanumeric characters and symbols
(4 – 15 characters).
root
New password
When logging into the web screen,
enter the password in 1-byte
alphanumeric characters and symbols
(4 – 15 characters).
system
Confirm new password
For confirmation, enter the same
password that you entered in [New
password].
system
We recommend changing the default password.
174
Projector Web Screen Menu
Setting the Date and Time [Date and time settings]
From [Date and time settings] in the settings screen, you can set time settings such
as the current date and time, date/time display format, time zone, and daylight
saving time. For the setting procedure, see “Network Setting” (P73).
Item
Date and
time
Explanation
Factory default setting
2018/01/01
Indication
order
Choose [YYYY/MM/DD], [MM/DD/
YYYY], or [DD/MM/YYYY] as the date
display format.
YYYY/MM/DD
Time
Enter the time in 1-byte numbers, in the
range 00:00:00 to 23:59:59.
00:00:00
Time zone
Select a city in your time zone.
(GMT) Dublin, Lisbon,
London
SNTP
Select whether to turn the SNTP
(Simple Network Time Protocol)
function on or off.
Choosing [ON (IPv4)] will prevent you
from configuring the following settings.
[Date]
[Time]
[IPv6 SNTP server IP address]
Choosing [ON (IPv6)] will prevent you
from configuring the following settings.
[Date]
[Time]
[IPv4 SNTP server IP address]
OFF
IPv4 SNTP
server IP
address
Enter the IPv4 SNTP server IP address
in 1-byte numbers.
0.0.0.0
IPv6 SNTP
server IP
address
Enter the IPv6 SNTP server IP address
in 1-byte numbers.
<Blank>
175
Projector Web Screen Menu
Enter the date in 1-byte numbers.
Menu Guide
Date
Projector Web Screen Menu
Item
Summer
time
Explanation
Factory default setting
ON / OFF
Select whether to turn the summer time
function on or off (Time adjustment one
hour ahead at the beginning of daylight
saving time and one hour back at the
end).
Choosing [OFF] will prevent you from
configuring the following settings.
[Start point Month]
[Start point Week]
[Start point Day]
[Start point Time]
[Finish point Month]
[Finish point Week]
[Finish point Day]
[Finish point Time]
OFF
Start point
Month
Select the month when daylight saving
time begins.
1
Start point
Week
Select the week when daylight saving
time beings.
1
Start point
Day
Select the day when daylight saving
time begins.
Mon
Start point
Time
Enter the starting time for daylight
saving time in 1-byte numbers, in the
range 00:00 to 23:59.
00:00
Finish point
Month
Select the month when daylight saving
time ends.
1
Finish point
Week
Select the week when daylight saving
time ends.
1
Finish point
Day
Select the day when daylight saving
time ends.
Mon
Finish point
Time
Enter the ending time for daylight
saving time in 1-byte numbers, in the
range 00:00 to 23:59.
00:00
176
Projector Web Screen Menu
Setting a Scheduling [Schedule]
From [Schedule] in the settings screen, you can automate some projector tasks by
scheduling them. As the timing of scheduled operation, choose from [Usually],
which is not during a certain period, or one of five special period times (Period.1 –
Period.5) that you set up. For the setting procedure, see “Network Setting” (P73).
Item
Schedule
view
Explanation
Factory default setting
Period.1
Time setting
In the left box, enter the starting date of
the specific period you are scheduling,
and in the right box, enter the ending
date, using 1-byte numbers.
Dates of periods cannot be set to
overlap.
2018/01/01
Usually
Shows the usual schedule, which can
be turned on or off by selecting the
check boxes.
Cleared (OFF)
Period.1
Shows the timing of the scheduled
period 1. Can be turned on or off by
selecting the check box.
Cleared (OFF)
Period.2
Shows the timing of the scheduled
period 2. Can be turned on or off by
selecting the check box.
Cleared (OFF)
Period.3
Shows the timing of the scheduled
period 3. Can be turned on or off by
selecting the check box.
Cleared (OFF)
Period.4
Shows the timing of the scheduled
period 4. Can be turned on or off by
selecting the check box.
Cleared (OFF)
177
Projector Web Screen Menu
Select a specific period to configure.
Menu Guide
Select
period
Projector Web Screen Menu
Item
Schedule
view
Period.5
Time Schedule
Explanation
Factory default setting
Shows the timing of the scheduled
period 5. Can be turned on or off by
selecting the check box.
Cleared (OFF)
Shows times and days of the week of
the usual schedule or period schedule
selected in [Schedule view].
Green vertical line: projector on; gray
vertical line: projector off; blue vertical
line: switch input signals.
Up to 8 schedules can be set per day.
—
Clicking an item in [Time Schedule] displays the [Edit schedule] screen, enabling
you to edit the schedule of the selected day or time.
Item
Edit
schedule
Explanation
Factory default setting
Day
Shows the day of the week for the
selected schedule.
Time
Enter the automatic execution time in 1- <Blank>
byte numbers, in the range 00:00 to
23:59.
Operation
As the operation for automatic
execution, choose [Power], [Input], or
[Calibration].
Power
Parameter
As parameters for automatic execution,
choose from the following options.
• When [Operation] is set to [Power]:
[ON] / [OFF]
• When [Operation] is set to [Input]:
[HDMI-1/2] / [DP-1/2/1x2] /
[HDBaseT]
• When [Operation] is set to
[Calibration]:
[LIGHT]
ON
178
—
Projector Web Screen Menu
Clicking [Add schedule] in [Time Schedule] displays the [Add schedule] screen,
enabling you to add a new schedule to the selected usual schedule or period
schedule.
Item
Add
schedule
Explanation
Factory default setting
Select a day of the week for automatic
execution. Multiple days can be
selected.
Cleared
Time
Enter the automatic execution time in 1- <Blank>
byte numbers, in the range 00:00 to
23:59.
Operation
As the operation for automatic
execution, choose [Power], [Input] or
[Calibration].
Power
Parameter
As parameters for automatic execution,
choose from the following options.
• When [Operation] is set to [Power]:
[ON] / [OFF]
• When [Operation] is set to [Input]:
[HDMI-1/2] / [DP-1/2/1x2] /
[HDBaseT]
• When [Operation] is set to
[Calibration]:
[LIGHT]
ON
Clicking [Copy schedule to different day] in [Time Schedule] displays the [Schedule
copy] screen, enabling you to copy a schedule to any day for the selected usual
schedule or period schedule.
Menu Guide
Day
Projector Web Screen Menu
179
Projector Web Screen Menu
Item
Schedule
copy
Explanation
Factory default setting
Copy origin
Select the day to copy from.
Mon
Registration
Events
Shows schedule details on the selected
day.
<Blank>
Copy to day
Select the day to copy to. Multiple days
can be selected.
Cleared
Basic Wired Network Settings [Wired]
From [Wired] on the settings screen, you can complete basic network information
for wired connections. For the setting procedure, see “Network Setting” (P73).
For IPv4
Item
For IPv6
Explanation
Factory default setting
MAC address
Shows the projector’s wired MAC
address.
The projector’s wired
MAC address
IPv4
address
DHCP
Select whether to turn the DHCP
function on or off for wired LAN (IPv4).
The following settings cannot be
configured manually when this setting is
[ON], because the IP address is
acquired from the DHCP server.
[IP address]
[Subnet mask]
[Default gateway]
OFF
IP address
Enter the projector’s wired LAN (IPv4)
IP address in 1-byte numbers.
192.168.254.254
Subnet
mask
Enter the wired LAN (IPv4) subnet mask
in 1-byte numbers.
255.255.255.0
Default
gateway
Enter the wired LAN (IPv4) default
gateway address in 1-byte numbers.
0.0.0.0
180
Projector Web Screen Menu
Item
IPv6
address
Explanation
Factory default setting
Link local
address
Shows the projector’s wired LAN (IPv6)
link-local IP address.
The projector’s wired
LAN (IPv6) link-local IP
address
Auto
Shows the projector’s automatically
assigned wired LAN (IPv6) address.
Automatically assigned
IP address as acquired
for [Auto settings]
Static
Shows the projector’s manually
assigned wired LAN (IPv6) address.
<Blank>
IPv6
Specify on or off for the IPv6 function of
the wired LAN (IPv6).
Choosing [OFF] will prevent you from
configuring the following settings.
[Autoconfiguration]
[IP address]
[Prefix length]
[Default gateway]
OFF
Autoconfigu- Select on or off for the auto setting
ration
function of the wired LAN (IPv6).
ON
IP address
Enter the wired LAN (IPv6) address in
1-byte numbers or letters between A
and F.
<Blank>
Prefix length
Enter the wired LAN (IPv6) prefix length
in 1-byte numbers.
<Blank>
Default
gateway
Enter the wired LAN (IPv6) default
gateway address in 1-byte numbers or
letters between A and F.
<Blank>
Menu Guide
If settings related to TCP/IP were changed, it is necessary to disconnect and reconnect to
the network.
If the network subnet mask was changed, select [Subnet mask] in the above screen and
set the new subnet mask.
Projector Web Screen Menu
181
Projector Web Screen Menu
Basic Wireless Network Settings [Wireless]
From [Wireless] on the settings screen, you can complete basic network
information for wireless connections. For the setting procedure, see “Network
Setting” (P73).
For IPv4
Item
For IPv6
Explanation
Factory default setting
MAC address
Shows the projector’s wireless MAC
address.
The projector’s wireless
MAC address
IPv4
address
DHCP
Select whether to turn the DHCP
function on or off for wireless LAN
(IPv4). The following settings cannot be
configured manually when this setting is
[ON], because the IP address is
acquired from the DHCP server.
[IP address]
[Subnet mask]
[Default gateway]
OFF
IP address
Enter the projector’s wireless LAN
(IPv4) IP address in 1-byte numbers.
192.168.253.254
Subnet
mask
Enter the wireless LAN (IPv4) subnet
mask in 1-byte numbers.
255.255.255.0
Default
gateway
Enter the wireless LAN (IPv4) default
gateway address in 1-byte numbers.
0.0.0.0
182
Projector Web Screen Menu
Item
IPv6
address
Explanation
Factory default setting
Link local
address
Shows the projector’s wireless LAN
(IPv6) link-local IP address.
The projector’s wireless
LAN (IPv6) link-local IP
address
Auto
Shows the projector’s automatically
assigned wireless LAN (IPv6) address.
Automatically assigned
IP address as acquired
for [Auto settings]
Static
Shows the projector’s manually
assigned wireless LAN (IPv6) address.
<Blank>
IPv6
Specify on or off for the wireless LAN
(IPv6) function.
Choosing [OFF] will prevent you from
configuring the following settings.
[Autoconfiguration]
[IP address]
[Prefix length]
[Default gateway]
OFF
Autoconfigu- Select on or off for the auto setting
ration
function of the wireless LAN (IPv6).
ON
IP address
Enter the wireless LAN (IPv6) IP
address in 1-byte numbers or letters
between A and F.
<Blank>
Prefix length
Enter the wireless LAN (IPv6) prefix
length in 1-byte numbers.
<Blank>
Default
gateway
Enter the wireless LAN (IPv6) default
gateway address in 1-byte numbers or
letters between A and F.
<Blank>
Menu Guide
Projector Web Screen Menu
183
Projector Web Screen Menu
Item
Wireless
setting
Explanation
Factory default setting
Wi-Fi
Protected
Setup
Select a method of establishing a
wireless connection. Not available in PJ
AP wireless LAN mode.
None (Manual)
Mode
Display or select the wireless
connection mode. Not available in PJ
AP wireless LAN mode.
infrastructure mode
(select)
Select SSID
Select the wireless access point’s SSID.
Not available in PJ AP wireless LAN
mode.
<Blank>
SSID
Display or select the wireless access
<Blank>
point’s SSID. Partial SSID editing is
supported in PJ AP wireless LAN mode.
Security
Display or select the wireless security
setting value.
Open
Channel
Display or select the wireless channel
number. Not available when the
wireless LAN mode is infrastructure
mode.
6
Key ID
Display or select the wireless WEP key
ID. Not available when security is set to
other than WEP.
1
Key type
Select the wireless security key input
type. Not available in PJ AP wireless
LAN mode.
ASCII
Key
Enter the wireless security key.
<Blank>
• If settings related to TCP/IP were changed, it is necessary to disconnect and reconnect
to the network. If the network subnet mask was changed, select [Subnet mask] in the
above screen and set the new subnet mask.
• IPv6 connectivity is not available in PJ AP mode (P66). [IPv6 address] is grayed out.
• For partial SSID editing when connected in PJ AP wireless LAN mode (P66), you can
edit the portion between PJ- and _Canon0D. Enter 1-byte alphanumeric characters,
including hyphens and underscores (1 – 15 characters).
184
Projector Web Screen Menu
Setting Up Email [Mail]
From [Mail] in the settings screen, you can set the items necessary to send error
mails and test mails. For the setting procedure, see “Network Setting” (P73).
Item
Explanation
Factory default setting
OFF
To:
Enter the recipient address for error
mails in 1-byte alphanumeric characters
and symbols (1 – 63 characters).
MailUserAccount
Cc:
Enter the CC address for error mails in
1-byte alphanumeric characters and
symbols (1 – 63 characters).
<Blank>
From:
Enter the sender address for error mails
in 1-byte alphanumeric characters and
symbols (1 – 63 characters).
Projector@canon.co.jp
IPv4 SMTP server IP
address
Enter the SMTP server IP address
(IPv4) in 1-byte numbers.
0.0.0.0
IPv4 SMTP server port
number
Enter the SMTP server port number
(IPv4) in 1-byte numbers (1 – 65535).
25
IPv6 SMTP server IP
address
Enter the SMTP server IP address
(IPv6) in 1-byte numbers.
<Blank>
IPv6 SMTP server port
number
Enter the SMTP server port number
(IPv6) in 1-byte numbers (1 – 65535).
25
Mail resend interval*
Enter the interval for resending mail
when an error occurred (unit: seconds)
within the range of 0 – 59 seconds
using 1-byte numbers.
10
Mail resend times
Enter the number of times to resend
mail when an error occurred within the
range of 0 – 255 using 1-byte numbers.
3
185
Projector Web Screen Menu
Select whether to turn the error mail
sending function on or off, and IPv4 or
IPv6 for the network to use.
Menu Guide
Error report
Projector Web Screen Menu
* When the interval is set to 0 seconds, repeated attempts to send mail are made
(as set in [Mail resend times]) without pausing between attempts.
Mail Authentication Settings
From [Mail auth] under [Mail] in the settings screen, you can configure the settings
for authentication of mail that is sent when an error occurs. For the setting
procedure, see “Network Setting” (P73).
Item
Explanation
Factory default setting
Mail authentication
Select the mail authentication method. If
[OFF] is selected, the other mail
authentication settings cannot be
changed.
OFF
User name
Enter the user name to use for mail
authentication in 1-byte alphanumeric
characters and symbols (1 – 63
characters).
<Blank>
Password
Enter the password for mail
authentication in 1-byte alphanumeric
characters and symbols (1 – 63
characters).
<Blank>
Confirm password
For confirmation, enter the same
<Blank>
password as you entered in [Password].
IPv4 POP3 server IP
address
Enter the POP3 server IP address
(IPv4) in 1-byte numbers.
0.0.0.0
IPv4 POP3 server port
number
Enter the POP3 server port number
(IPv4) in 1-byte numbers (1 – 65535).
110
IPv6 POP3 server IP
address
Enter the POP3 server IP address
(IPv6) in 1-byte numbers.
<Blank>
IPv6 POP3 server port
number
Enter the POP3 server port number
(IPv6) in 1-byte numbers (1 – 65535).
110
POP before SMTP
response time
Enter the SMTP authentication timeout
period after POP3 authentication (unit:
milliseconds) using 1-byte numbers (0 –
9999 milliseconds).
300
Sending a Test Mail
You can send a test mail to the mail address specified in [Mail] under [Mail] in the
settings screen by clicking [Send test mail] at the bottom of the screen.
186
Projector Web Screen Menu
SNMP Settings [SNMP]
From [SNMP] in the settings screen, you can configure the settings related to
control of projectors which use SNMP (Simple Network Management Protocol). For
the setting procedure, see “Network Setting” (P73).
Item
Explanation
Factory default setting
Select the SNMP function version. If
[OFF] is selected, the other settings in
this screen cannot be configured.
OFF
Receive community
Enter the community name which will
receive projector information in 1-byte
alphanumeric characters and symbols
(1 – 15 characters).
<Blank>
Password
Enter the community settings password
in 1-byte alphanumeric characters and
symbols (8 – 15 characters). It can be
set only when the SNMP version is V3.
<Blank>
Confirm password
For confirmation, enter the same
<Blank>
password as you entered in [Password].
Menu Guide
SNMP
Projector Web Screen Menu
187
Projector Web Screen Menu
Setting Projector Information [Projector info.]
From [Projector info.] in the settings screen, you can enter relevant comments such
as projector names and locations where projectors are installed so that the
information can be used to identify projectors when multiple projectors are installed
on the network. For the setting procedure, see “Network Setting” (P73).
Item
Explanation
Factory default setting
Projector name
Enter the projector name in 1-byte
alphanumeric characters and symbols
(1 – 63 characters).
Canon Projector001
Comment
Enter any relevant notes, such as
where the projector is installed.
<Blank>
Some characters such as # cannot be used for [Projector name] and [Comment].
Setting PJLink [PJLink]
From [PJLink] in the settings screen, you can set the PJLink functions which are the
standard for projector management on a network. For the setting procedure, see
“Network Setting” (P73). For information about PJLink, see “What is PJLink?”
(P170).
188
Projector Web Screen Menu
Item
Explanation
Factory default setting
PJLink
Turn the PJLink function on or off. If
[OFF] is selected, the other settings in
this screen cannot be configured.
ON
PJLink authentication
Select whether to turn the PJLink
authentication function on or off. If
[OFF] is selected, it is not possible to
change the following items.
[Password]
[Confirm password]
ON
Password
Enter the PJLink authentication
password in 1-byte alphanumeric
characters (1 – 32 characters).
system
Confirm password
For confirmation, enter the same
password that you entered in
[Password].
system
Notify 1
Specify whether to send spontaneous
state notification. Choosing [OFF] will
prevent you from configuring [Notify 1
IP Address].
OFF
Notify 1 IP Address
If [Notify 1] is [ON], specify the IP
address to receive notification.
<Blank>
Notify 2
Configure for notification to multiple
recipients.
OFF
Notify 2 IP Address
If [Notify 2] is [ON], specify the IP
address to receive notification.
<Blank>
Setting Up a Controller Manufactured by Crestron Electronics
[Crestron]
Menu Guide
The [Crestron e-Control] screen will open. For details on the Crestron Controller,
visit the Crestron website.
http://www.crestron.com
Projector Web Screen Menu
189
Maintenance /
Product Specifications /
Troubleshooting
190
Maintenance
Cleaning the Projector
Clean the projector frequently to prevent dust from settling on the surface.
A dirty lens may ruin the quality of the projected image.
Do not use adhesives, lubricants, oils, or alkaline detergents for
maintenance of the projector. They could adhere to the cabinet and
damage it, possibly resulting in the projector falling from its mounting
and causing an accident or personal injury.
Before cleaning the projector, always turn it off, unplug it after the
cooling fan stops, and wait at least one hour. Otherwise, you may get
burned because the main unit is very hot immediately after the
projector is turned off.
Wipe the projector’s main unit softly with a soft cloth.
If the projector is heavily soiled, soak the cloth in water with a small amount of
detergent in it, squeeze the cloth thoroughly, and then wipe the projector with it.
After cleaning, wipe the projector with a dry cloth.
Replacing the Air Filter
Follow the procedure below when replacing the air filter.
1
2
Turn off the projector power and remove the power plug.
Place your finger on the notch
under the filter unit on the side of
the projector and pull the filter
unit out.
Maintenance / Product Specifications / Troubleshooting
• Never use volatile cleaning liquid or benzine, as
these may damage the finish of the projector.
• Do not use a chemical dust cloth.
• The lens surface is easily damaged, so do not use
a hard cloth or tissues.
Maintenance
Air filter
Air filter frame handle
191
Maintenance
3
Press up on the air filter from
below and remove it from the air
filter frame.
Air filter
Air filter frame
4
Install a new air filter in the air
filter frame.
5
Securely insert the
frame holding the air
filter, all the way into
the projector.
• After air filter replacement, reset [Air filter counter] (P156).
• Handle the air filter carefully. If damaged, the air filter will not work properly.
• To purchase an air filter (part no: RS-FL05), contact the Canon Customer Support
Center.
192
Product Specifications
■ Supported Signal Types
This projector supports the following signal types.
The projector automatically projects input signals correctly from computers or AV
equipment compatible with any of these signals.
YCbCr422 can be received at 12-bit color depth for all signal types (excluding
frequencies preceded by (*6)).
Compatibility with all computers is not guaranteed.
FP : Front porch
SW : Sync width
BP : Back porch
HDMI
Frequency
Vertical
[Hz]
Dot clock
[MHz]
640x480
720x480
720x576
800x600
31.469
31.469
31.250
37.879
18.000
37.500
45.000
48.363
47.712
48.000
55.935
55.469
63.981
28.125
31.250
33.750
27.000
56.250
67.500
66.576
67.500
26.400
56.250
66.636
66.000
74.038
74.556
74.582
74.100
88.787
98.713
52.593
52.438
54.000
56.250
67.500
112.500
135.000
59.940
59.940
50.000
60.317
24.000
50.000
60.000
60.004
59.790
(*1)60.000
59.887
59.901
60.020
25.000
(*1)25.000
30.000
24.000
50.000
60.000
(*1)59.924
60.000
24.000
50.000
(*1)59.978
60.000
59.950
59.885
(*1)59.905
(*1)60.000
59.951
59.972
(*1)23.993
(*1)23.999
24.000
25.000
30.000
(*2)50.000
(*2)60.000
25.175
27.000
27.000
40.000
59.400
74.250
74.250
65.000
85.500
72.000
106.500
88.750
108.000
74.250
72.000
74.250
74.250
148.500
148.500
147.000
148.500
99.000
185.625
181.250
198.000
154.000
193.250
205.250
157.684
241.500
268.500
266.750
209.750
297.000
297.000
297.000
594.000
594.000
1280x720
1024x768
1366x768
1440x900
1280x1024
1920x1080(I)
1920x1080
2048x1080
2560x1080
1920x1200
2048x1200
2560x1440
2560x1600
3840x2160
193
Blanking information
Horizontal
Vertical
FP, SW, BP
FP, SW, BP
16, 96, 48
16, 62, 60
12, 64, 68
40, 128, 88
1760, 40, 220
440, 40, 220
110, 40, 220
24, 136, 160
70, 143, 213
14, 56, 64
80, 152, 232
48, 32, 80
48, 112, 248
528, 44, 148
32, 168, 184
88, 44, 148
638, 44, 148
528, 44, 148
88, 44, 148
48, 32, 80
44, 44, 64
998, 44, 148
548, 44, 148
48, 32, 80
248, 44, 148
48, 32, 80
136, 200, 336
136, 216, 352
8, 32, 40
48, 32, 80
48, 32, 80
216, 400, 616
48, 32, 80
1276, 88, 296
1056, 88, 296
176, 88, 296
1056, 88, 296
176, 88, 296
10, 2, 33
9, 6, 30
5, 5, 39
1, 4, 23
5, 5, 20
5, 5, 20
5, 5, 20
3, 6, 29
3, 3, 24
1, 3, 28
3, 6, 25
3, 6, 17
1, 3, 38
4.5, 10, 30.5
45.5, 10, 114.5
4.5, 10, 30.5
4, 5, 36
4, 5, 36
4, 5, 36
3, 10, 18
4, 5, 36
4, 5, 11
4, 5, 36
3, 10, 18
4, 5, 11
3, 6, 26
3, 6, 36
3, 10, 32
21, 8, 6
3, 5, 33
3, 6, 37
3, 5, 24
3, 5, 17
8, 10, 72
8, 10, 72
8, 10, 72
8, 10, 72
8, 10, 72
Supported
color depth
[bit]
8/10/12
8/10/12
8/10/12
8/10/12
8/10/12
8/10/12
8/10/12
8/10/12
8/10/12
8/10/12
8/10/12
8/10/12
8/10/12
8/10/12
8/10/12
8/10/12
8/10/12
8/10/12
8/10/12
8/10/12
8/10/12
8/10/12
8/10/12
8/10/12
8/10/12
8/10/12
8/10/12
8/10/12
8/10/12
8/10/12
8/10/12
8/10/12
8/10/12
8/10/12(*3)
8/10/12(*3)
8/10/12(*3)
8/10/12(*4)
8/10/12(*4)
Product Specifications
Horizontal
[kHz]
Maintenance / Product Specifications / Troubleshooting
Resolution
Product Specifications
Resolution
4096x2160
Horizontal
[kHz]
Frequency
Vertical
[Hz]
Dot clock
[MHz]
52.561
52.397
54.000
56.250
67.500
112.500
135.000
(*1)23.979
(*1)23.980
24.000
25.000
30.000
(*2)50.000
(*2)60.000
284.250
223.000
297.000
297.000
297.000
594.000
594.000
Blanking information
Horizontal
Vertical
FP, SW, BP
FP, SW, BP
224, 432, 656
48, 32, 80
1020, 88, 296
968, 88, 128
88, 88, 128
968, 88, 128
88, 88, 128
3, 10, 19
3, 10, 12
8, 10, 72
8, 10, 72
8, 10, 72
8, 10, 72
8, 10, 72
Supported
color depth
[bit]
8/10/12
8/10/12
8/10/12(*3)
8/10/12(*3)
8/10/12(*3)
8/10/12(*4)
8/10/12(*4)
*1: EDID is not supported.
*2: YCbCr420 only in EDID mode when [High compatibility] is selected.
*3: 10- and 12-bit color depth are available in EDID mode when [Wide bandwidth (4K60Hz)] is
selected.
*4: 10- and 12-bit color depth are available for YCbCr420 in EDID mode when [Wide bandwidth
(4K60Hz)] is selected.
FP : Front porch
SW : Sync width
BP : Back porch
DisplayPort (Single input)
Resolution
Horizontal
[kHz]
Frequency
Vertical
[Hz]
Dot clock
[MHz]
640x480
720x480
720x576
800x600
31.469
31.469
31.250
37.879
18.000
37.500
45.000
48.363
47.712
48.000
55.935
55.469
63.981
28.125
33.750
27.000
56.250
67.500
66.576
67.500
26.400
56.250
66.636
66.000
74.556
74.038
74.582
74.100
88.787
98.713
59.940
59.940
50.000
60.317
24.000
50.000
60.000
60.004
59.790
(*1)60.000
59.887
59.901
60.020
25.000
30.000
24.000
50.000
60.000
(*1)59.924
60.000
24.000
50.000
(*1)59.978
60.000
59.885
59.950
(*1)59.905
(*1)60.000
59.951
59.972
25.175
27.000
27.000
40.000
59.400
74.250
74.250
65.000
85.500
72.000
106.500
88.750
108.000
74.250
74.250
74.250
148.500
148.500
147.000
148.500
99.000
185.625
181.250
198.000
193.250
154.000
205.250
157.684
241.500
268.500
1280x720
1024x768
1366x768
1440x900
1280x1024
1920x1080(I)
1920x1080
2048x1080
2560x1080
1920x1200
2048x1200
2560x1440
2560x1600
194
Blanking information
Horizontal
Vertical
FP, SW, BP
FP, SW, BP
16, 96, 48
16, 62, 60
12, 64, 68
40, 128, 88
1760, 40, 220
440, 40, 220
110, 40, 220
24, 136, 160
70, 143, 213
14, 56, 64
80, 152, 232
48, 32, 80
48, 112, 248
528, 44, 148
88, 44, 148
638, 44, 148
528, 44, 148
88, 44, 148
48, 32, 80
44, 44, 64
998, 44, 148
548, 44, 148
48, 32, 80
248, 44, 148
136, 200, 336
48, 32, 80
136, 216, 352
8, 32, 40
48, 32, 80
48, 32, 80
10, 2, 33
9, 6, 30
5, 5, 39
1, 4, 23
5, 5, 20
5, 5, 20
5, 5, 20
3, 6, 29
3, 3, 24
1, 3, 28
3, 6, 25
3, 6, 17
1, 3, 38
4.5, 10, 30.5
4.5, 10, 30.5
4, 5, 36
4, 5, 36
4, 5, 36
3, 10, 18
4, 5, 36
4, 5, 11
4, 5, 36
3, 10, 18
4, 5, 11
3, 6, 36
3, 6, 26
3, 10, 32
21, 8, 6
3, 5, 33
3, 6, 37
Supported
color depth
[bit]
8/10/12
8/10/12
8/10/12
8/10/12
8/10/12
8/10/12
8/10/12
8/10/12
8/10/12
8/10/12
8/10/12
8/10/12
8/10/12
8/10/12
8/10/12
8/10/12
8/10/12
8/10/12
8/10/12
8/10/12
8/10/12
8/10/12
8/10/12
8/10/12
8/10/12
8/10/12
8/10/12
8/10/12
8/10/12
8/10/12
Product Specifications
Resolution
3840x2160
4096x2160
Horizontal
[kHz]
Frequency
Vertical
[Hz]
Dot clock
[MHz]
52.593
52.438
54.000
56.250
67.500
110.500
112.500
133.187
133.313
133.320
135.000
52.561
52.397
54.000
56.250
67.500
110.550
112.500
133.187
133.282
133.320
135.000
(*1)23.993
(*1)23.999
24.000
25.000
30.000
(*1)49.977
50.000
(*1)59.940
(*1)59.997
(*1)60.000
60.000
(*1)23.979
(*1)23.980
24.000
25.000
30.000
(*1)50.000
50.000
(*1)59.940
(*1)59.983
(*1)60.000
60.000
266.750
209.750
297.000
297.000
297.000
442.000
594.000
522.092
533.250
522.614
594.000
284.250
223.000
297.000
297.000
297.000
470.500
594.000
556.188
567.250
556.744
594.000
Blanking information
Horizontal
Vertical
FP, SW, BP
FP, SW, BP
216, 400, 616
48, 32, 80
1276, 88, 296
1056, 88, 296
176, 88, 296
48, 32, 80
1056, 88, 296
8, 32, 40
48, 32, 80
8, 32, 40
176, 88, 296
224, 432, 656
48, 32, 80
1020, 88, 296
968, 88, 128
88, 88, 128
48, 32, 80
968, 88, 128
8, 32, 40
48, 32, 80
8, 32, 40
88, 88, 128
3, 5, 24
3, 5, 17
8, 10, 72
8, 10, 72
8, 10, 72
3, 5, 43
8, 10, 72
48, 8, 6
3, 5, 54
48, 8, 6
8, 10, 72
3, 10, 19
3, 10, 12
8, 10, 72
8, 10, 72
8, 10, 72
3, 10, 38
8, 10, 72
48, 8, 6
3, 10, 49
48, 8, 6
8, 10, 72
Supported
color depth
[bit]
8/10/12
8/10/12
8/10/12
8/10/12
8/10/12
8/10/8/-/8/-/8/-/8/-/8/-/8/10/12
8/10/12
8/10/12
8/10/12
8/10/12
8/10/8/-/8/-/8/-/8/-/8/-/-
FP : Front porch
SW : Sync width
BP : Back porch
DisplayPort (Multi input)
Resolution
(*5)
1280x480
2560x1600
3840x2160
4096x2160
Horizontal
[kHz]
Frequency
Vertical
[Hz]
Dot clock
[MHz]
31.469
98.611
112.500
133.293
133.320
135.000
112.500
133.265
133.320
135.000
59.940
(*1)59.910
(*1)50.000
(*1)59.988
(*1)60.000
60.000
(*1)50.000
(*1)59.975
(*1)60.000
60.000
25.175
142.000
297.000
277.250
266.640
297.000
297.000
294.250
283.704
297.000
Blanking information
Horizontal
Vertical
FP, SW, BP
FP, SW, BP
16, 96, 48
48, 32, 80
528, 44, 148
48, 32, 80
8, 32, 40
88, 44, 148
484, 44, 64
48, 32, 80
8, 32, 40
44, 44, 64
10, 2, 33
3, 10, 33
8, 10, 72
3, 10, 49
48, 8, 6
8, 10, 72
8, 10, 72
3, 10, 49
48, 8, 6
8, 10, 72
Supported
color depth
[bit]
8/10/12
8/10/12
8/10/12
8/10/12
8/10/12
8/10/12
8/10/12
8/10/12
8/10/12
8/10/12
*1: EDID is not supported.
*5: Resolution when using two ports in combination (For example, if the resolution is listed as
1280x480, the single-port resolution is 640x480.)
FP : Front porch
SW : Sync width
BP : Back porch
HDBaseT
Horizontal
[kHz]
Frequency
Vertical
[Hz]
Dot clock
[MHz]
640x480
720x480
720x576
800x600
31.469
31.469
31.250
37.879
59.940
59.940
50.000
60.317
25.175
27.000
27.000
40.000
195
Blanking information
Horizontal
Vertical
FP, SW, BP
FP, SW, BP
16, 96, 48
16, 62, 60
12, 64, 68
40, 128, 88
10, 2, 33
9, 6, 30
5, 5, 39
1, 4, 23
Supported
color depth
[bit]
8/10/12
8/10/12
8/10/12
8/10/12
Product Specifications
Resolution
Maintenance / Product Specifications / Troubleshooting
*1: EDID is not supported.
Product Specifications
Resolution
1280x720
1024x768
1366x768
1440x900
1280x1024
1920x1080(I)
1920x1080
2048x1080
2560x1080
1920x1200
2048x1200
2560x1440
2560x1600
3840x2160
4096x2160
Horizontal
[kHz]
Frequency
Vertical
[Hz]
Dot clock
[MHz]
18.000
37.500
45.000
48.363
47.712
48.000
55.935
55.469
63.981
31.250
28.125
33.750
27.000
56.250
67.500
66.576
67.500
26.400
56.250
66.636
66.000
74.556
74.038
74.582
74.100
88.787
98.713
52.593
52.438
54.000
56.250
67.500
112.500
135.000
52.561
52.397
54.000
56.250
67.500
112.500
135.000
24.000
50.000
60.000
60.004
59.790
(*1)60.000
59.887
59.901
60.020
(*1)25.000
25.000
30.000
24.000
50.000
60.000
(*1)59.924
60.000
24.000
50.000
(*1)59.978
60.000
59.885
59.950
(*1)59.905
(*1)60.000
59.951
59.972
(*1)23.993
(*1)23.999
24.000
25.000
30.000
(*6)50.000
(*6)60.000
(*1)23.979
(*1)23.980
24.000
25.000
30.000
(*6)50.000
(*6)60.000
59.400
74.250
74.250
65.000
85.500
72.000
106.500
88.750
108.000
72.000
74.250
74.250
74.250
148.500
148.500
147.000
148.500
99.000
185.625
181.250
198.000
193.250
154.000
205.250
157.684
241.500
268.500
266.750
209.750
297.000
297.000
297.000
594.000
594.000
284.250
223.000
297.000
297.000
297.000
594.000
594.000
Blanking information
Horizontal
Vertical
FP, SW, BP
FP, SW, BP
1760, 40, 220
440, 40, 220
110, 40, 220
24, 136, 160
70, 143, 213
14, 56, 64
80, 152, 232
48, 32, 80
48, 112, 248
32, 168, 184
528, 44, 148
88, 44, 148
638, 44, 148
528, 44, 148
88, 44, 148
48, 32, 80
44, 44, 64
998, 44, 148
548, 44, 148
48, 32, 80
248, 44, 148
136, 200, 336
48, 32, 80
136, 216, 352
8, 32, 40
48, 32, 80
48, 32, 80
216, 400, 616
48, 32, 80
1276, 88, 296
1056, 88, 296
176, 88, 296
1056, 88, 296
176, 88, 296
224, 432, 656
48, 32, 80
1020, 88, 296
968, 88, 128
88, 88, 128
968, 88, 128
88, 88, 128
5, 5, 20
5, 5, 20
5, 5, 20
3, 6, 29
3, 3, 24
1, 3, 28
3, 6, 25
3, 6, 17
1, 3, 38
45.5, 10, 114.5
4.5, 10, 30.5
4.5, 10, 30.5
4, 5, 36
4, 5, 36
4, 5, 36
3, 10, 18
4, 5, 36
4, 5, 11
4, 5, 36
3, 10, 18
4, 5, 11
3, 6, 36
3, 6, 26
3, 10, 32
21, 8, 6
3, 5, 33
3, 6, 37
3, 5, 24
3, 5, 17
8, 10, 72
8, 10, 72
8, 10, 72
8, 10, 72
8, 10, 72
3, 10, 19
3, 10, 12
8, 10, 72
8, 10, 72
8, 10, 72
8, 10, 72
8, 10, 72
Supported
color depth
[bit]
8/10/12
8/10/12
8/10/12
8/10/12
8/10/12
8/10/12
8/10/12
8/10/12
8/10/12
8/10/12
8/10/12
8/10/12
8/10/12
8/10/12
8/10/12
8/10/12
8/10/12
8/10/12
8/10/12
8/10/12
8/10/12
8/10/12
8/10/12
8/10/8/10/12
8/-/8/-/8/-/8/10/8/-/8/-/8/-/8/-/8/-/8/-/8/10/8/-/8/-/8/-/8/-/8/-/-
*1: EDID is not supported.
*6: YCbCr420 only
* HDBaseT signals are signals conforming to the HDBaseT specification. They are carried in a cable
as HDBaseT signals and supplied to the projector before conversion to HDMI signals.
Any HDBaseT signals received by the projector that cannot be converted back to HDMI signals
listed in the table may not be projected correctly.
196
Product Specifications
■ Projector
Model name
Display system
Effective display area size
Effective number of pixels
Other features
Zoom (*4)
Focus
Lens shift (*4)(*5)
Focal length (*4)
F value (*4)
4K6021Z
Reflective liquid crystal panel (LCOS) : 3 panels
Color separation by dichroic mirror / polarizing beam
splitter and color composition by prism
0.74'' / approx. 17:9
8,847,360 (4096 x 2160)
Active matrix system
1.76x
Electric
V: -73% to +73% (Electric), H: ±11% (Electric)
22.67 to 39.79 mm (0.9'' - 1.6'')
F2.1 to F2.4
Type
Blue laser diode + yellow phosphor
Light
source
Projection
lens
Display
device
Optical system
80% or more
See “Supported Signal Types” (P193 – P196)
Computer signal input
Maximum input resolution 4096 x 2160 dots
Video signal input
Maximum input resolution 4096 x 2160 dots
Digital image input
640 x 480, 720 x 480, 720 x 576, 800 x 600, 1280 x 720,
1024 x 768, 1366 x 768, 1440 x 900, 1280 x 1024,
1920 ×1080, 2048 x 1080, 2560 x 1080, 1920 x 1200,
2048 x 1200, 2560 x 1440, 2560 x 1600, 3840 x 2160,
4096 x 2160
HDMI x 2
Digital PC, Digital Video
DisplayPort x 2
Digital PC, Digital Video
RJ-45
HDBaseT input (video / audio / control / network)
Mini jack
Mini jack
Mini jack
RS-232C
Trigger out
AUDIO OUT
Wired remote control
CONTROL (Dsub9)
USB
USB Type A
Noise (Light source mode: Normal /
Quiet 1 / Quiet 2)
Operating temperature
Power supply
Maximum power consumption
38 / 33 / 29 dB
0°C (32°F) to 45°C (113°F)
AC100V to 240V 50 / 60Hz
625W
197
Product Specifications
Other terminals Video signal
Display
Video signals
and connectors input terminal
resolution
Minimum: 101.6 cm (40'') to Maximum: 1524 cm (600''),
Projection distance: 1.2 m to 31.7 m (3.9'- 104.0')
1,073,000,000 colors
6000lm
22,000:1
Maintenance / Product Specifications / Troubleshooting
Image size / Projection distance
(*4)
Number of colors
Brightness (*1) (*2)
Contrast ratio (*1) (*3)
Ratio of brightness at periphery to
center (*1) (*4)
Supported input signal types
Power consumption
in standby mode
Product Specifications
Model name
Networking off, Serial
communication: Service port
Networking on, Serial
communication: Service port
Networking off, Serial
communication: HDBaseT
Networking on, Serial
communication: HDBaseT
Standard dimensions
Weight
Wireless
connectivity
Accessories
4K6021Z
0.25W
1.6W
1.5W
1.6W
480 mm (W) x 196 mm (H) x 545 mm (D) / 18.9 (W) x
7.7 (H) x 21.5 (D) in
480 mm (W) x 175 mm (H) x 545 mm (D) / 18.9 (W) x
6.9 (H) x 21.5 (D) in (excluding protrusions)
Approx. 19 kg / 41.9 lbs (not including projection lens unit)
Remote control, remote control dry-cell batteries, power
cord, Important Information and Warranty Card
Standards
IEEE802.11b/g/n
Supported channels
1 CH - 11 CH
Frequency band
2.4 GHz
(*1) Compliance with ISO21118-2012
(*2) When using a Standard 4K Zoom Lens (RS-SL07RST) under the following conditions:
[Image mode] > [Presentation], [Motion blur reduction] > [Off], [Light source mode] > [Normal]
To protect the projector, light output may be lowered as the ambient temperature rises.
(*3) When using a Standard 4K Zoom Lens (RS-SL07RST) under the following conditions:
[Image mode] > [Presentation], [Motion blur reduction] > [Off], [Light source mode] > [Normal],
[Dynamic contrast] > [High]
(*4) When using a Standard 4K Zoom Lens (RS-SL07RST).
(*5) In [Normal] lens shift mode
* 99.99% or more of the LCD panel pixels are effective. During projection, 0.01% or less of pixels
may stay lit or unlit due to the characteristics of the LCD panel.
* Using the projector continuously for an extended period of time may accelerate the deterioration of
optical parts.
* Product specifications and appearance are subject to change without prior notice.
198
Product Specifications
■ Remote Control
Type
Power supply
Operating range
Dimensions
RS-RC07
DC 3.0V, using two AAA-size batteries
Approx. 8 m ±25° horizontal and vertical (to infrared remote receiver)
46.5 mm (W) x 23 mm (H) x 159 mm (D) / 1.8 (W) x 0.9 (H) x 6.3 (D) in.
Weight
56 g / 2.0 oz
■ Specification of Each Lens Unit (Option)
Name
Model number
Standard 4K Zoom Lens*
Long Zoom Lens
RS-SL07RST
RS-SL02LZ
22.67 – 39.79 mm (0.9 – 1.6'')
34.0 – 57.7 mm (1.3 – 2.3'')
External View
Focal length
F number
1.99 – 2.83
104 mm (4.1'')
143.4 mm (5.6'')
Height
126 mm (5.0'')
106.7 mm (4.2'')
Length
229 mm (9.0'')
175.3 mm (6.9'')
Weight
Approx. 1900 g (4.2 lbs)
Approx. 925 g (2.0 lbs)
Zoom ratio
1.76x
1.7x
Projection distance
1.20 – 31.71 m (3.9 – 104.0')
1.80 – 46.84 m (5.9 – 153.7')
Size 100 projection
distance
3.00 – 5.29 m (9.8 – 17.4')
4.58 – 7.77 m (15.0 – 25.5')
Supported
Unsupported
Marginal focus
* For optimal projector performance, a Standard 4K Zoom Lens is recommended.
Maintenance / Product Specifications / Troubleshooting
2.1 – 2.4
Width
Product Specifications
199
Product Specifications
Name
Ultra-long Zoom Lens
Wide Zoom Lens
RS-SL04UL
RS-SL05WZ
53.6 – 105.6 mm (2.1 – 4.2'')
15.56 – 23.34 mm (0.6 – 0.9'')
2.34 – 2.81
2.09 – 2.34
Width
143.4 mm (5.6'')
143.4 mm (5.6'')
Height
106.7 mm (4.2'')
106.7 mm (4.2'')
Model number
External View
Focal length
F number
Length
183.7 mm (7.2'')
183.7 mm (7.2'')
Weight
Approx. 1110 g (2.4 lbs)
Approx. 1065 g (2.3 lbs)
1.97x
1.5x
Projection distance
4.48 – 85.98 m (14.7 – 282.1')
0.83 – 18.85 m (2.7 – 61.8')
Size 100 projection
distance
7.39 – 14.44 m (24.2 – 47.4')
2.08 – 3.12 m (6.8 – 10.2')
Unsupported
Unsupported
Zoom ratio
Marginal focus
For details about the amount of lens shift, see “Adjustment Using Lens Shift” (P58).
200
Product Specifications
Name
Model number
Short Fixed Lens
Ultra-wide Zoom Lens
RS-SL03WF
RS-SL06UW
12.8 mm (0.5")
8.39 mm (0.33")
External View
Focal length
F number
2.0
2.40
Width
143.4 mm (5.6'')
143.4 mm (5.6'')
Height
106.7 mm (4.2")
113.7 mm (4.8")
Length
175.3 mm (6.9")
304.3 mm (12.0")
Weight
Approx. 1060 g (2.3 lbs)
Approx. 1520 g (3.3 lbs)
Zoom ratio
—
0.67 – 4.99 m (2.2 – 16.4')
0.45 – 3.38 m (1.5 – 11.1')
Size 100 projection
distance
1.66 m (5.4')
1.12 m (3.7')
Marginal focus
Unsupported
Supported
Name
Model number
Standard Zoom Lens*
RS-SL01ST
External View
Focal length
F number
23.0 – 34.5 mm (0.9 – 1.4'')
1.89 – 2.65
Width
143.4 mm (5.6'')
Height
106.7 mm (4.2'')
Length
175.3 mm (6.9'')
Weight
Approx. 725 g (1.6 lbs)
Zoom ratio
1.5x
1.23 – 27.99 m (4.0 – 91.8')
Size 100 projection
distance
3.10 – 4.65 m (10.2 – 15.3')
Marginal focus
Unsupported
* Though not a Standard 4K Zoom Lens, this lens offers good focus performance.
For details about the amount of lens shift, see “Adjustment Using Lens Shift” (P58).
201
Product Specifications
Projection distance
Maintenance / Product Specifications / Troubleshooting
—
Projection distance
Product Specifications
■ External View
94 mm (3.7")
4K6021Z
196 mm (7.7")
175 mm (6.9")
545 mm (21.5")
480 mm (18.9")
451.7 mm (17.8")
431 mm (17.0")
38.8 mm (1.5")
202
Product Specifications
■ Service Port (CONTROL)
Pin assignment
Pin No.
1
2
3
4
5
6
7
8
9
Signal
OPEN
RxD
TxD
OPEN
GND
OPEN
Internal pull-up
OPEN
OPEN
Communication format
Communication mode
Communication speed
Character length
Stop bits
User commands
Commands
Power on
Power supply
ASCII representation
50h 4Fh 57h 45h 52h 3Dh 4Fh 4Eh 0Dh
POWER=OFF<CR>
50h 4Fh 57h 45h 52h 3Dh 4Fh 46h 46h
0Dh
GET=POWER<CR>
47h 45h 54h 3Dh 50h 4Fh 57h 45h 52h
0Dh
HDBaseT
INPUT=HDBT<CR>
49h 4Eh 50h 55h 54h 3Dh 48h 44h 42h
54h 0Dh
HDMI-1
INPUT=HDMI1<CR>
49h 4Eh 50h 55h 54h 3Dh 48h 44h 4Dh
49h 31h 0Dh
HDMI-2
INPUT=HDMI2<CR>
49h 4Eh 50h 55h 54h 3Dh 48h 44h 4Dh
49h 32h 0Dh
DP-1
INPUT=DP1<CR>
49h 4Eh 50h 55h 54h 3Dh 44h 50h 31h
0Dh
DP-2
INPUT=DP2<CR>
49h 4Eh 50h 55h 54h 3Dh 44h 50h 32h
0Dh
DP 1x2
INPUT=DP1X2<CR>
49h 4Eh 50h 55h 54h 3Dh 44h 50h 31h
58h 32h 0Dh
GET=INPUT<CR>
47h 45h 54h 3Dh 49h 4Eh 50h 55h 54h
0Dh
Power off
Input source
203
Product Specifications
POWER=ON<CR>
Power status
acquisition
Input source
acquisition
Binary representation
Maintenance / Product Specifications / Troubleshooting
Parity
Flow control
: RS-232C, asynchronous, half-duplex communication
: 19200bps
: 8 bits
: Switchable between 1 bit and 2 bits. Factory default, or
state after [Factory defaults] is executed, is 1 bit.
: None
: None
Product Specifications
Commands
Image Mode
IMAGE=STANDARD<CR>
Presentation
49h 4Dh 41h 47h 45h 3Dh 50h 52h 45h
IMAGE=PRESENTATION<CR> 53h 45h 4Eh 54h 41h 54h 49h 4Fh 4Eh
0Dh
Dynamic
IMAGE=DYNAMIC<CR>
49h 4Dh 41h 47h 45h 3Dh 44h 59h 4Eh
41h 4Dh 49h 43h 0Dh
Video
IMAGE=VIDEO<CR>
49h 4Dh 41h 47h 45h 3Dh 56h 49h 44h
45h 4Fh 0Dh
Photo/sRGB
IMAGE=PHOTO_SRGB<CR>
49h 4Dh 41h 47h 45h 3Dh 50h 48h 4Fh
54h 4Fh 5Fh 53h 52h 47h 42h 0Dh
DICOM SIM
IMAGE=DCM_SIM<CR>
49h 4Dh 41h 47h 45h 3Dh 44h 43h 4Dh
5Fh 53h 49h 4Dh 0Dh
User 1
IMAGE=USER_1<CR>
49h 4Dh 41h 47h 45h 3Dh 55h 53h 45h
52h 5Fh 31h 0Dh
User 2
IMAGE=USER_2<CR>
49h 4Dh 41h 47h 45h 3Dh 55h 53h 45h
52h 5Fh 32h 0Dh
User 3
IMAGE=USER_3<CR>
49h 4Dh 41h 47h 45h 3Dh 55h 53h 45h
52h 5Fh 33h 0Dh
User 4
IMAGE=USER_4<CR>
49h 4Dh 41h 47h 45h 3Dh 55h 53h 45h
52h 5Fh 34h 0Dh
User 5
IMAGE=USER_5<CR>
49h 4Dh 41h 47h 45h 3Dh 55h 53h 45h
52h 5Fh 35h 0Dh
GET=IMAGE<CR>
47h 45h 54h 3Dh 49h 4Dh 41h 47h 45h
0Dh
BRI=<Value><CR>
42h 52h 49h 3Dh <numeric code> 0Dh
GET=BRI<CR>
47h 45h 54h 3Dh 42h 52h 49h 0Dh
SHARP=<Value><CR>
53h 48h 41h 52h 50h 3Dh <numeric
code> 0Dh
GET=SHARP<CR>
47h 45h 54h 3Dh 53h 48h 41h 52h 50h
0Dh
Brightness
value setting
Brightness
acquisition
Sharpness
Sharpness
value setting
Sharpness
acquisition
Contrast
Contrast value
CONT=<Value><CR>
setting
Contrast
acquisition
47h 45h 54h 3Dh 43h 4Fh 4Eh 54h 0Dh
Auto
ASPECT=AUTO<CR>
41h 53h 50h 45h 43h 54h 3Dh 41h 55h
54h 4Fh 0Dh
True size
ASPECT=TRUE<CR>
41h 53h 50h 45h 43h 54h 3Dh 54h 52h
55h 45h 0Dh
GET=ASPECT<CR>
47h 45h 54h 3Dh 41h 53h 50h 45h 43h
54h 0Dh
Aspect value
acquisition
Blank On
Blank
acquisition
43h 4Fh 4Eh 54h 3Dh <numeric code>
0Dh
GET=CONT<CR>
Aspect
Blank
Binary representation
49h 4Dh 41h 47h 45h 3Dh 53h 54h 41h
4Eh 44h 41h 52h 44h 0Dh
Standard
Image mode
acquisition
Brightness
ASCII representation
Blank Off
BLANK=ON<CR>
42h 4Ch 41h 4Eh 4Bh 3Dh 4Fh 4Eh 0Dh
BLANK=OFF<CR>
42h 4Ch 41h 4Eh 4Bh 3Dh 4Fh 46h 46h
0Dh
GET=BLANK<CR>
47h 45h 54h 3Dh 42h 4Ch 41h 4Eh 4Bh
0Dh
204
Troubleshooting
LED Indicator Details
When there is a problem with the projector, the LED indicator on the side of the
projector illuminates or flashes continuously after the projector is turned off.
• Wait until the cooling fan stops and disconnect the power plug from the power outlet before
dealing with the problem.
LED indicator
Meaning
Cause and countermeasure
status
WARNING and Temperature The temperature inside the projector is too high
TEMP are lit.
abnormality for some reason or the outside air temperature is
higher than the operating range. If the problem is
inside the projector, check whether the projector
is installed and operating normally, unplug the
projector from the power outlet to cool down the
projector interior and then restart projection. If the
air intake or exhaust vent is blocked, remove the
obstacle. If the air filter is clogged, replace it
(P191). If the same warning occurs again, there
may be a malfunction in the projector.*
WARNING and Faulty light
The light source does not illuminate. Restart the
LIGHT are lit.
source
projector and check projection. If the light source
does not illuminate after this, the light source
drive circuit may be damaged.*
WARNING
Filter error
The air filter is not installed correctly. Install the
(only) flashes
air filter correctly and restart the projector. If the
3 times
same warning occurs again, there may be a
repeatedly.
malfunction in the projector.*
WARNING
Faulty
There may be a malfunction in the cooling fan or
(only) flashes 4 cooling fan
another component. Unplug the projector from
times
the power outlet, then plug it back into the outlet
repeatedly.
and turn on the projector again. If the same
warning occurs again, there may be a
malfunction in the projector.*
WARNING
Faulty power Abnormal voltage is applied to some parts in the
(only) flashes 5 supply
power supply or another failure may have
times
occurred. Unplug the projector from the power
repeatedly.
outlet, then plug it back into the outlet and turn on
the projector again. If the same warning occurs
again, there may be a malfunction in the
projector. Unplug the projector from the power
outlet.*
Maintenance / Product Specifications / Troubleshooting
205
Troubleshooting
Troubleshooting
LED indicator
status
WARNING
(only) flashes 6
times
repeatedly.
Meaning
Problem
with lens
unit
installation
Cause and countermeasure
The lens unit is not installed correctly. Unplug the
projector, install the lens unit correctly, and then
plug the projector in again. If the same warning
occurs again, there may be a malfunction in the
projector.*
* Contact the Canon Customer Support Center.
Symptoms and Solutions
■ You Cannot Turn on the Projector
Cause
The power cord is not
connected correctly.
The power cord has just
been connected.
The safety device is
activated because the air
intake or the exhaust
vent is blocked and the
internal temperature of
the projector has
increased.
The lens unit is not
attached correctly.
The air filter is not
installed correctly.
Key lock is enabled.
Countermeasure
Check whether the power cord is connected correctly
(P64).
Wait at least one second after plugging the projector
in until you press the POWER button. You cannot
turn the projector on immediately after plugging it in
(P41).
When the safety device is active, the [POWER]
indicator does not turn on when you connect the
power cord. You cannot disable this safety device.
Remove any obstacle that is blocking the air intake or
exhaust vent.*
The lens unit is not installed correctly. Unplug the
projector, install the lens unit correctly, and then plug
the projector in again. If the same warning occurs
again, there may be a malfunction in the projector.*
Check whether the air filter is installed correctly
(P191).
Check that Key lock (P144) is not enabled for the
projector or the remote control.
* Contact the Canon Customer Support Center.
206
Troubleshooting
■ You Cannot Project an Image from the Projector
Cause
A cable is not connected
correctly.
20 seconds have not
elapsed since the
projector was turned on.
The LAN cable (shielded
twisted pair) is not
connected correctly.
Check that the same input signal has been correctly
selected for the connected AV equipment from the
[Input] menu (P42).
Check whether the selected input signal type is
correct (P193).
Press the BLANK button on the remote control
(P47).
Turn first the projector and then the computer off and
then back on again.
Turn on the external monitor output on the computer.
To turn on the external monitor output, press the
[LCD] or [VGA] function key or a key with an icon for
the external monitor, while holding down the [Fn] key
on the keyboard of the computer. With Windows 10 /
Windows 8.1 / Windows 7, you can turn on image
output by holding down the Windows logo key and
pressing the [P] key.
The combination of keys used to perform this
operation varies depending on the model of
computer. For more detailed information, refer to the
manual that came with your computer.
When [HDBaseT] is selected in the [Input] menu,
check whether the LAN cable (shielded twisted pair)
is connected to the projector correctly (P65).
Troubleshooting
207
Maintenance / Product Specifications / Troubleshooting
No image is sent from
the AV equipment.
Connection with the
input terminal has not
been performed
correctly.
No input signal type has
been selected for the
connected AV
equipment.
The input signal type is
incorrect.
The BLANK function has
been selected.
No image is projected
due to a problem with
the computer.
The external monitor
output is not set on the
computer correctly.
Countermeasure
Check whether the projector is connected to the
computer or AV equipment correctly (P62 – P64).
When the projector is turned on, the opening window
is displayed for approximately 20 seconds. To project
an image immediately, press the OK button on the
remote control or side control (P29, P33).
Check whether an image is played on the connected
video camcorder, DVD, etc.
Check whether the AV equipment is connected to the
projector input terminal correctly (P32).
Troubleshooting
■ There is no Sound
Cause
The MUTE function is
enabled.
The volume level is
adjusted to the
minimum.
Audio in terminal select
is [Off].
Countermeasure
Press the MUTE button on the remote control (P34).
Press the VOL button on the remote control or the
VOL+ button on the side control to adjust the volume
level (P29, P34).
Change the Audio In terminal to the appropriate
setting (P145).
■ The Projected Image Is Blurred
Cause
The image is out of
focus.
The distance to the
screen is too short.
The projector is not
placed straight in front of
the screen.
The projector has been
moved to a place where
the temperature varies a
lot.
The lens is stained.
Video is blurred.
Motion blur reduction is
not available.
The lens unit is not
installed correctly.
The lens lever is not
engaged.
Countermeasure
Adjust the focus (P43).
Check whether the distance to the screen is
appropriate (P51).
Check whether the projector is placed obliquely to
the screen. A slight error in the projection angle can
be corrected through the keystone adjustment
function (P81).
When the projector is moved from a location where
the temperature is low to a location where the
temperature is high, condensation may form on the
lens. The condensation will evaporate after a period
of time and the projector will be able to project a
normal image.
Clean the lens (P191).
Activate motion blur reduction (P149).
[Motion blur reduction] is not available in [DICOM
SIM] image mode. The menu is grayed out.
Check whether the lens unit is installed correctly
(P53).
Check whether the lens unit is installed correctly
(P53).
208
Troubleshooting
■ You Cannot Project an Image Appropriately
Cause
The projected image is
inverted in the vertical or
horizontal direction.
A computer cable is
used in which some pins
are not connected.
Countermeasure
The ceiling mounted / rear projection setting is
incorrect. Check the [Image flip H/V] setting in the
[Install settings] menu (P128).
Use a computer cable in which all pins are
connected.
■ The Projector Power Turns Off
Cause
The air intake or exhaust
vent is blocked.
The air filter is dirty.
■ The Projector Cannot Join the Network
Cause
The LAN cable (shielded
twisted pair) is not
connected correctly.
The projector has not
been on long enough
(less than about 40
seconds).
Countermeasure
Check whether the LAN cable (shielded twisted pair)
is connected to the projector correctly (P65).
Network functions are not available until about 40
seconds after the projector is plugged in. Wait at
least 40 seconds, and then try to connect again
(P71).
Troubleshooting
209
Maintenance / Product Specifications / Troubleshooting
The operating
environment is
inappropriate.
Countermeasure
Check whether the air intake or exhaust vent is
blocked. If the air intake or exhaust vent is blocked,
the temperature inside the projector will increase and
the power is automatically turned off to protect the
projector (The [WARNING] indicator and [TEMP]
indicator are lit.). Wait until the projector temperature
drops, then make sure that the intake and exhaust
vents are not blocked and turn on the projector (P22,
P28).
Check whether the air filter is clogged with dust.
If the air filter is clogged, replace the air filter (P191).
Check whether the operating temperature is between
0°C (32°F) and 45°C (113°F) (P21).
Projector settings must be adjusted when using the
projector at altitudes of 2,300 m (7,545.8') or higher.
In the [Install settings] menu, set [High altitude] under
[Professional settings] to [On] (P133).
Troubleshooting
Cause
The projector cannot join
a wireless network.
A HDBaseT transmitter
or similar device is not
on.
Countermeasure
Follow the instructions in “Network Setting” (P73 –
P74) and “Detailed settings (wireless)” (P165 –
P169) to set up the projector again. In PJ AP mode,
try changing the wireless channel on the projector
(P165 – P169). In infrastructure mode, try changing
the wireless channel on the access point. If
connection is still not possible, contact the Canon
Customer Support Center.
Check the power of the HDBaseT transmitter.
■ You Cannot Operate the Remote Control
Cause
Countermeasure
Batteries are not
installed properly or they
have run out.
You are operating the
remote control from the
outside of the remote
control operating range.
There is an obstacle
between the projector
and the remote control.
Check whether batteries are installed correctly. If
batteries are installed correctly, replace them with
new batteries (P35).
Check whether you are operating the remote control
within the remote control operating range of the main
unit of the projector (P36).
You are operating the
remote control in an
unsuitable operating
environment.
The channel setting of
the remote control does
not match the setting of
the projector.
The key lock function is
preventing operation of
the remote control.
Light from the room
lights is entering the
infrared remote receiver.
Remove the obstacle between the infrared remote
receiver of the main unit of the projector and the
remote control or point the remote control in an
obstacle-free path.
Check whether the infrared remote receiver of the
main unit of the projector is exposed to direct sunlight
or strong light of lighting apparatus (P36).
Check whether the channel setting of the remote
control has been changed. You can check the
[Remote control channel] setting in the [System
settings] menu (P145).
Check whether [Key lock] is enabled to disable the
remote control operation.
In the [System settings] menu, set [Key lock] to [Off]
(P144).
Block the light.
210
Index
Numerics
FREEZE ............................................47
6-axis color adjust ........................... 123
G
A
Gamma ...........................................119
Adjusting the Volume ........................ 49
Advanced registration ..................... 131
Air filter............................................ 191
Ambient light ................................... 120
AMX Device Discovery ................... 171
AUDIO OUT terminal ........................ 32
H
HDBaseT.....................................4, 146
HDBaseT terminal .................32, 63, 65
HDMI terminal .............................32, 62
HDR ................................................122
HDR10 ............................................122
High altitude .................................... 133
HLG .................................................122
B
BLANK .............................................. 47
Brightness ....................................... 118
I
C
Image adjustment....................104, 117
Information ..............................104, 173
Input settings ...........................104, 113
Input terminal ....................................32
Install settings..........................104, 127
Iris ...................................................138
Calibration....................................... 155
Ceiling mounted .............................. 128
Contrast .......................................... 118
Crestron RoomView........................ 171
D
K
Date and time settings .................... 151
DICOM SIM....................................... 45
Digital noise reduction..................... 121
Digital zoom ...................................... 33
Direct power on............................... 148
Display resolution (Preparing the
computer) ....................................... 43
DisplayPort.................................. 32, 62
Dynamic gamma ............................. 121
Key lock...........................................144
Keystone .........................................129
L
Language ........................................149
LED indicator.............................30, 205
Lens - Position ................................137
Light source mode...........................125
Logo display .................................... 141
E
M
Edge blending ....................... 4, 96, 134
Effect of ambient light ..................... 120
F
Firmware ......................................... 157
211
Index
Marginal focus .................................134
Memory color correction..................122
MENU..............................................102
Menu ............................................... 102
MUTE ................................................49
Index
U
Muting the sound .............................. 49
USB Port ...................................32, 157
N
W
Network password .......................... 159
Network settings ..................... 104, 158
WARNING indicator ..................30, 205
Wireless Networks .................... 66, 165
O
On screen ....................................... 141
Operating mode .............................. 133
P
Partial distortion correction ............. 132
Password ................................ 150, 151
PJLink ..................................... 170, 188
Power counter................................. 156
Power supply settings ..................... 147
Power-Saving Settings...................... 48
Projector on..................................... 141
R
Random noise reduction ................. 121
Rear projection................................ 128
Remote control.................... 33, 35, 145
Reset....................................... 126, 157
S
Schedule ......................................... 152
Screen color.................................... 138
Selecting a language ...................... 149
Setting display status ...................... 113
Sharpness....................................... 119
Side control ....................................... 29
Signal type ...................................... 193
Supported Signal Types.................. 193
System settings....................... 104, 139
T
Terminals and connectors ................. 32
Test pattern ....................................... 92
212
Option
• Ceiling attachment
Part No.: RS-CL15*1
• Ceiling-mount arm
Part No.: RS-CL17*1
• Ceiling-mount pipe
(350 – 550 mm / 13.8 – 21.7 in)
Part No.: RS-CL08*2
• Ceiling-mount pipe
(550 – 950 mm / 21.7 – 37.4 in)
Part No.: RS-CL09*2
• Air filter
Part No.: RS-FL05
• Remote control
Part No.: RS-RC07
• Remote control
Part No.: RS-RC05
*1 When mounting the projector on the ceiling, both ceiling attachment (RS-CL15) and ceilingmount arm (RS-CL17) are required.
*2 Use the above materials to hang the projector from the ceiling.
213
CANON INC.
30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan
CANON U.S.A. INC.
One Canon Park, Melville, New York 11747, U.S.A.
For all inquires concerning this product, call toll free in the U.S. 1-800-OK-CANON
CANON EUROPE LTD.
3 The Square, Stockley Park, Uxbridge, Middlesex, UB11 1ET United Kingdom
CANON EUROPA N.V.
Bovenkerkerweg 59, 1185 XB Amstelveen, The Netherlands
YT1-7566-000
©CANON INC.2019
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising