Canon | EOS-1D C | User manual | Canon EOS-1D C User manual

Canon EOS-1D C User manual
ENGLISH
Introduction
Communication Software for the Camera
EOS Utility
Contents
Ver. 3.10
1D X Mk II
1D X
250D
1D C
5DS/5DS R
200D
750D
5D Mk IV 5D Mk III
2000D
1300D
R
RP
6D Mk II
6D
7D Mk II
90D
80D
77D
4000D
M6 Mk II
M6
M5
M3
M10
M100
M50
760D
800D
Instruction Manual
O Content of this Instruction Manual
O EU stands for EOS Utility.
O Camera model is displayed as an icon.
Example:EOS-1D X  1D X
As for XX icon, it indicates all models EOS XX
(WG)/EOS XX (W)/EOS XX (N) respectively. When
any explanation is necessary for the specific model,
an icon such as XX(WG) XX(W) is used.
O
displays the relevant camera model.
O The selection sequence of menus is displayed in 
procedures.
(Example: Select the [Window] menu  [Main
Window].)
O Square brackets are used to indicate items such as
menu names, button names and window names
that appear on the computer screen.
1
2
3
4
Downloading
Images
Camera
Settings
Remote
Shooting
O Text inside < > indicates a camera switch name or
icon, or a keyboard key name.
O p.** indicates a reference page.
Click to move to the relevant page.
O
: Marks information that should be read before
use.
O
: Marks additional information you may find
helpful.
Preferences
Reference
Index
O Switching Between Pages
O Click on arrows on the bottom right of the screen.
: Next page
: Previous page
: Return to a page you had previously displayed
O Click on the chapter headings on the right side of the
screen to switch to the contents page of that
chapter. Also, click the item you want to read about
on the table of contents to move to the relevant
page.
© CANON INC. 2019
CEL-SX8TA210
Introduction
Introduction
EOS Utility (hereinafter EU) is software for communication with your EOS
camera. By connecting the camera and computer with an interface cable,
you can download to your computer images saved in the camera’s
memory card as well as set various camera settings or shoot remotely
from EU on your computer.
Main Features of EU
From EU, you can control the camera remotely and perform the
following main features.
O Batch download to your computer images
saved in the camera’s memory card.
O You can also download to your computer only images you have
selected.
O Set various camera settings from your
computer.
O Shoot remotely by controlling the camera
from your computer.
O Remote Live View shooting – Shoot while checking your subject in
real time on your computer.
O You can also shoot remotely by operating the camera’s shutter
button.
O Preset a time allowing the camera to shoot automatically with
timer shooting.
System Requirements
OS
Mac OS X 10.11 to 10.14
Computer
Macintosh with one of the above OS installed and a USB
port as a standard feature
CPU
Intel processor
RAM
Minimum 2GB
Display
Resolution: 1024 × 768 or more
Colors: Thousands or more
Check the Canon website for the latest system requirements, including
supported OS versions.
Contents
1
2
3
4
Downloading
Images
Camera
Settings
Remote
Shooting
Preferences
Reference
Index
O When downloading images or shooting
remotely, view/check images with the linked
Digital Photo Professional version 4.x
immediately.
In EU Ver. 3.8.20 or later, clicking [
] in the main window allows
you to check for update files on the server and download any
update files that are available.
To use this function, an environment with Internet access
(subscription to a provider and an in-place line connection) is
required. Internet Service Provider (ISP) connection fees or access
point connection fees may apply.
2
Supported Camera
Can be used for RAW images, JPEG images, and movies shot with the
cameras below.
EOS-1D X Mark II
EOS-1D X
EOS-1D C
EOS 5DS/5DS R
EOS 5D Mark IV
EOS 5D Mark III
EOS R
EOS RP
EOS 7D Mark II
EOS 6D Mark II
EOS 90D
EOS 77D
EOS 760D
EOS 800D
EOS 250D
EOS 200D
EOS 750D
EOS 2000D
EOS M6 Mark II
EOS 1300D
EOS M6*
EOS M3*
EOS M10*
EOS 6D
EOS 80D
EOS 4000D
EOS M5*
EOS M100*
EOS M50
* When these cameras are linked with EU, the capture window does not
appear as they are unable to perform remote shooting and Remote
Live View shooting.
Introduction
Contents
1
2
3
4
Downloading
Images
Camera
Settings
Remote
Shooting
Preferences
Reference
Index
3
Contents
Introduction ................................................................ 2
Main Features of EU..................................................... 2
System Requirements .................................................. 2
Supported Camera ....................................................... 3
1 Downloading Images to your Computer ................. 6
Connecting the Camera and Computer ........................ 7
Starting up EU .............................................................. 9
LAN Connection with EU ....................................... 10
Batch Downloading Images to Your Computer.......... 11
Downloading Selected Images to Your
Computer ............................................................... 12
Operating the Camera to Download Images to Your
Computer ............................................................... 15
Quitting EU ................................................................ 16
2 Setting the Camera from Your Computer ............. 17
Settings with the Camera Settings Window............... 18
Items Settable with the Camera Settings
Window ..................................................................
Applying Picture Style Files to the Camera ...........
Registering Lens Aberration Correction Data for
the Lens in the Camera .........................................
Saving White Balance to your Computer...............
Registering Personal White Balance in the
Camera ..................................................................
Function Settings with Shooting Menu of the
Capture Window ........................................................
Items Settable with the Capture Window...............
19
20
22
27
28
30
31
Setting Picture Styles and Applying to the
Camera...................................................................
Setting JPEG Quality and Applying to the
Camera...................................................................
Adjusting White Balance and Applying to the
Camera...................................................................
Setting a Silent Shutter and Applying to the
Camera...................................................................
Introduction
32
Contents
34
35
35
3 Remote Shooting by Controlling the Camera
from Your Computer ............................................ 36
Remote Live View Shooting ....................................... 37
HDR (High Dynamic Range) Shooting ....................... 43
Focus Bracketing........................................................ 45
Remote Live View Window Functions ........................ 46
Focusing Manually.................................................. 46
Focusing Using AF ................................................. 48
Checking the Depth of Field and Exposure ............ 52
White Balance with the Remote Live View
Window...................................................................
Displaying an Electronic Level................................
Changing the Aspect Ratio.....................................
Audio Recording Setting.........................................
Overlaid Display Function.......................................
Displaying Grid Lines..............................................
Displaying Guide Lines...........................................
Power Zoom Operation ..........................................
Shooting by Operating the Camera ............................
Shooting Movies .........................................................
52
53
54
55
57
61
62
64
66
67
1
2
3
4
Downloading
Images
Camera
Settings
Remote
Shooting
Preferences
Reference
Index
4
Timer-controlled Shooting..........................................
Timer Shooting ......................................................
Remote Interval Timer Shooting ............................
Remote Bulb Shooting...............................................
Remote Bulb Shooting...........................................
Setting the Bulb Timer ...........................................
Flash Shooting...........................................................
Editing Picture Styles Using Remote Live View
Function .....................................................................
Registering Background Music to a Camera
Memory Card .............................................................
Setting Web Services ................................................
Registering IPTC Information ....................................
73
73
73
75
75
76
77
80
81
84
86
4 Preferences .......................................................... 87
Preferences ............................................................... 88
Basic Settings ........................................................ 88
Destination Folder.................................................. 88
File Name .............................................................. 89
Remote Shooting ................................................... 89
Linked Software ..................................................... 90
Time Settings......................................................... 90
Survey.................................................................... 91
List of Register Data Window Functions for Lens
Data/Lens Aberration Correction ................................ 97
List of Capture Window Functions.............................. 98
List of Flash Function Settings Window
Functions .................................................................. 100
List of Remote Live View Window (Live View Tab)
Functions .................................................................. 101
List of Remote Live View Window (Compose Tab)
Functions .................................................................. 102
List of Zoom View Window Functions....................... 103
Index......................................................................... 104
About This Instruction Manual .............................. 105
Trademarks .......................................................... 105
Introduction
Contents
1
2
3
4
Downloading
Images
Camera
Settings
Remote
Shooting
Preferences
Reference
Index
Reference................................................................. 92
Troubleshooting ......................................................... 93
Uninstalling the Software ........................................... 95
List of Viewer Window Functions............................... 96
5
1
Downloading Images to your Computer
Introduction
Basic operation such as preparing for downloading images to your
computer (connecting your camera and computer), starting up EU,
downloading images from your camera to your computer and quitting EU
are explained here.
Connecting the Camera and Computer..................... 7
Starting up EU ........................................................... 9
LAN Connection with EU ............................................ 10
Batch Downloading Images to Your Computer ....... 11
Downloading Selected Images to Your Computer...... 12
Downloading and Erasing GPS Log Files from a
Camera................................................................... 15
Operating the Camera to Download Images to Your
Computer.................................................................... 15
Quitting EU .............................................................. 16
Contents
1
2
3
4
Downloading
Images
Camera
Settings
Remote
Shooting
Preferences
Reference
Index
6
Connecting the Camera and Computer
To download to your computer images shot with your camera, you will
need to connect your camera and computer using an interface cable.
Before connecting your camera and computer with EU’s Wi-Fi/LAN
connection pairing function, see “LAN Connection with EU” (p.10).
EOS cameras other than
1
R
RP
Connect the large plug of the cable into the USB port
of your computer.
Introduction
R
RP
M6 Mk II
the plug of the cable into the computer’s
1 Connect
USB terminal (Type-C).
the other plug of the cable into the digital
2 Connect
terminal on your camera.
R
O When connecting the cable to the camera, use the cable
protector.
Contents
1
2
3
4
Downloading
Images
Camera
Settings
Remote
Shooting
O For the location and direction of the USB port, refer to the user’s
manual for the computer.
the small plug of the cable into the digital
2 Connect
terminal on your camera.
O Once the plug is connected to the camera according to the steps
for your camera model, preparation for downloading images is
complete. Refer to “
Confirming Computer Settings” to check
the settings of the computer, and continue with “Starting up EU”
(p.9).
1D X Mk II
5DS/5DS R
Preferences
Reference
Index
5D Mk IV 7D Mk II
O When connecting the cable to the camera, use the cable
protector. Connect the cable to the digital terminal with the
plug’s <
> icon facing the back of the camera.
Cameras other than those above
O With the <
> mark on the plug facing the front of the camera,
connect it to the camera’s <A/V OUT / DIGITAL> terminal or
digital terminal.
7
Introduction
Contents
1
2
3
4
Downloading
Images
Camera
Settings
Remote
Shooting
Preferences
O Using a genuine Canon interface cable is recommended.
O Confirming Computer Settings
Before you start up EU, connect the camera and the computer
and turn on the camera’s power, then make sure that the
following settings are applied to your computer. If these are not
applied, adjust the settings as follows.
Select [Applications]  [Image Capture].  Double-click the
icon of the camera connected to the computer.  Set
[Connecting this camera opens] to [No application].
After confirming and adjusting the settings, set the camera’s
power switch to <OFF>.
To start up EU, you must connect your camera to the same USB
port as when you confirmed and adjusted the settings.
To use another USB port, confirm and adjust the settings again.
1D C
5DS/5DS R 5D Mk IV
R
O With 1D X Mk II 1D X
7D Mk II , you can fix the plug to the camera with the cable
protector to prevent the plug from disconnecting. For details on
using it, see the camera´s instruction manual.
Reference
Index
8
Starting up EU
Introduction
When the camera’s power switch is set to <ON>, EU will start up, and
the camera and computer will be able to communicate.
Contents
Set the camera’s power switch to < ON >.
1
2 Click the [EOS Utility] icon on the Dock.
1
2
3
4
Downloading
Images
¿ Communication between the camera and the computer begins,
and the following screen appears.
¿ From the next time you connect your camera and the computer,
EU will start when you set your camera’s power switch to <ON>.
Camera
Settings
EU Main window
Remote
Shooting
Preferences
Reference
Index
¿ EU starts up, the main window appears, and your camera and
computer can now communicate. Continue with “Batch
Downloading Images to Your Computer”.
When EU starts, a [ ] icon appears on the menu bar of the
desktop. You can click this icon and display the screen to apply the
setting below.
[Do not launch EOS Utility automatically when camera is
connected]
If you select [Quit] on this screen, EU will not start automatically
when you connect the camera and the computer again.
9
Before starting the procedure to establish a LAN connection, make sure
to perform the following confirmation.
LAN Connection with EU
The Wi-Fi/LAN connection pairing function of EU is used for LAN
750D
connection. This function cannot be used with 760D
2000D
1300D
4000D
M6
M5
M3
M10
M100 .
up EU before connecting the camera and
1 Start
the computer.
¿ The following window appears.
Establish a connection following the procedures on Wireless File
Transmitter Instruction Manual, Wi-Fi Function Instruction Manual or
Wired LAN Instruction Manual supplied with the camera, and Wi-Fi
Adapter W-E1 Instruction Manual. Note the difference between
connection procedures for EU version 2.14 or later and those for
EU version 2.13 or earlier as shown below.
Contents
1
2
3
4
Downloading
Images
Camera
Settings
O Starting up WFT pairing software
(EU version 2.13 or earlier)
Starting up WFT pairing software is required.
(EU version 2.14, version 3.x)
While starting up WFT pairing software is not necessary, starting up
EU is required.
O When a camera is detected
(EU version 2.13 or earlier)
When a camera is detected and a message is displayed, double-click
the WFT pairing software icon.
(EU version 2.14, version 3.x)
When a camera is detected and a message is displayed, click the
message.
Introduction
Remote
Shooting
Preferences
the [Pairing over Wi-Fi/LAN] button. When a
2 Click
message [To connect to the camera via LAN, some
Firewall settings must be changed. Do you want to
make these changes?] appears, select [Yes].
Reference
Index
10
Batch Downloading Images to Your Computer
You can batch download to your computer the images saved on the
memory card inserted in the camera according to the selected condition.
The downloaded images are sorted by date into folders and are then
displayed in the main window of Digital Photo Professional version 4.x
(RAW image processing, viewing and editing software) (hereinafter
DPP), which is linked to start up automatically, where you can check
them immediately.
1
3
Select a condition for downloading images and click
the [OK] button.
Introduction
Contents
1
2
3
4
Downloading
Images
Click [Download images to computer].
¿ The setting dialog box closes.
4 Click the text [Start automatic download].
Camera
Settings
Remote
Shooting
Preferences
¿ Download images window appears.
2 Click the [Settings] button in [Start automatic download].
Reference
Index
¿ The [Save File] dialog box appears and image downloading to
your computer begins.
¿ The downloaded images are saved in the [Pictures] folder.
O When all images have been downloaded, DPP starts up
automatically and the downloaded images are displayed in
DPP’s main window.
¿ The setting dialog box appears.
11
5
Check the downloaded images.
DPP Main window
Introduction
Downloading Selected Images to Your Computer
From the images saved in your camera’s memory card, you can select
the ones you want and download them to your computer.
1 Click [Select and download].
Contents
1
2
3
4
Downloading
Images
Camera
Settings
Remote
Shooting
O Check the downloaded images in DPP.
For details on using DPP, refer to the “Digital Photo Professional
Version 4.x Instruction Manual” (PDF electronic manual).
O Continue with “Quitting EU” (p.16).
Preferences
¿ The viewer window appears and the images in the memory card
are displayed.
Reference
Index
O You can change the software, which starts up when you
download images, from DPP to other software in preferences
([Linked Software] window) (p.90).
O You can change the save destination for images downloaded
and images to download in preferences ([Destination Folder]
window (p.88).
O Downloading movie files may take some time due to the large file
size.
12
2
Introduction
View the images and select images to download.
Viewer window
Contents
1
2
3
4
Downloading
Images
Camera
Settings
Remote
Shooting
Preferences
O You can click the [
Add check mark
O You can also select several images with your mouse.
] button to change the thumbnail order.
O You can click the [
] button to filter the images with various
conditions and select images you want to download.
O You can click the [
] button to select the information
displayed on thumbnails.
Selecting [Date/time] displays the date and time when the file
was created.
Reference
Index
O You can click the [
] button to invert selection between
selected and not-selected images.
O You can click the [
] button to show only selected images.
O You can click the [
] button to filter images by the date
and time files were created.
O You can click the [
] button to change to the list view.
Click the [
] button to return to the thumbnail view.
O In the list view, you can click on the title of each item to begin
sorting.
Click [Folder] to sort in the same way as the [
] button in
thumbnail view.
13
3
Click the [Download] button.
¿ The images downloaded to your computer are displayed in the
[Quick Preview] window.
Introduction
Contents
1
2
3
4
Downloading
Images
¿ The download image dialog box appears.
the save destination and then click the [OK]
4 Specify
button.
Camera
Settings
Download image dialog box
Remote
Shooting
O The [Quick Preview] window allows you to quickly review the
downloaded images. You can also resize the [Quick Preview]
window.
O When all images have been downloaded, DPP starts up
automatically and the downloaded images are displayed.
O To switch to the main window, click the [Main Window] button in
the viewer window.
Preferences
Reference
Index
Displays the save destination on the computer
Specify the save destination
¿ The [Save File] dialog box appears and image downloading to
your computer begins.
O By clicking the [Format] button in the viewer window, you can
initialize the card to which the images displayed in the viewer
window.
O In step 2, you can batch checkmark several images in sequence.
After clicking the first image you want to download, hold the
< shift > key and click the last image, and [
] will be
displayed. By clicking the [
] button, the selected images will
be checkmarked in a batch.
O For a list of viewer window functions, see p.96.
14
Downloading and Erasing GPS Log Files from a Camera
1D X Mk II 5D Mk IV 6D Mk II
6D(WG)
7D Mk II
EOS cameras with built-in GPS have a function for saving GPS log files.
Using EU, you can download to your computer GPS log files saved in
the camera’s internal memory or on the camera’s memory card. You can
also delete GPS log files saved in the camera’s memory card. This
function is enabled only when a compatible version of Map Utility* is
installed.
For 6D(WG) and 7D Mk II , the camera's [Select GPS device] must be
set to [Internal GPS], or [GPS] be set to [Enable], and for 1D X Mk II
5D Mk IV and 6D Mk II , [GPS settings] be set to [Mode 1] or [Mode 2].
* For 6D Mk II : Ver. 1.8.x or later, for 5D Mk IV : Ver. 1.7.2 or later, for
1D X Mk II : Ver. 1.7.x or later, for 6D(WG) : Ver. 1.5.2 or later, and for
7D Mk II : Ver. 1.5.3 or later.
After starting EU to download images on a camera’s memory card to
your computer, the [Import GPS log files] dialog box appears if there are
GPS log files in the camera’s internal memory or the camera’s memory
card.
O Click the [Yes] button to download GPS log files to your
computer.
¿ The GPS log files are downloaded to your computer. When there
are GPS log files in the camera’s internal memory, they are
saved to the camera’s memory card* before being downloaded to
your computer.
Note that once the GPS log files are saved on the memory card,
GPS log files in the camera’s internal memory will be deleted.
* GPS log files are saved on the memory card specified as the
save destination by the camera.
Introduction
Operating the Camera to Download Images
to Your Computer
1D X Mk II
1D X
1D C
5DS/5DS R
5D Mk IV 5D Mk III
Contents
R
7D Mk II
If your camera has a direct image transfer function, you can download to
your computer the images saved on the memory card inserted in the
camera by operating the camera. Refer to your camera’s Instruction
Manual for details on its direct image transfer function.
your camera and computer, and then start
1 Connect
up EU
.
2 Operate the camera to transfer the images directly.
(p.7)
¿ The images in the camera are saved to your computer.
O When all images have been downloaded, Digital Photo Professional
version 4.x starts up and the downloaded images are displayed.
1
2
3
4
Downloading
Images
Camera
Settings
Remote
Shooting
Preferences
Reference
Index
O If you remove the check mark from [Delete the GPS log files from
the camera’s memory card after importing.], GPS log files in the
camera’s memory card will not be deleted even after they are
downloaded to your computer.
O Downloaded GPS log files are saved in the following folder.
[Documents]  [Canon Utilities]  [GPS Log Files]
15
Quitting EU
Introduction
1 Click the [Quit] button.
Contents
1
2
3
4
Downloading
Images
Camera
Settings
Remote
Shooting
¿ The window closes and EU quits.
Turn the camera’s power switch to < OFF >.
2
3 Disconnect the cable from the camera and computer.
O Do not pull on the cable; hold the plug and pull out.
Preferences
Reference
Index
EOS Utility Survey Program
Canon requests that information related to your Canon product be
sent to Canon (in case of using your Canon product in China, to the
legally approved research company) through the Internet. Canon
uses such information for development and marketing of products
that better meet customer needs.
Even after agreeing, you can change the send settings anytime in
the [Survey] tab sheet (p.91) in preferences.
16
2
Setting the Camera from Your Computer
Introduction
This section explains how to set the camera’s functions with EU.
Settings with the Camera Settings Window ............... 18
Items Settable with the Camera Settings Window...... 19
Applying Picture Style Files to the Camera ................ 20
Registering Lens Aberration Correction Data for
the Lens in the Camera .............................................. 22
Saving White Balance to your Computer .................... 27
Registering Personal White Balance in the Camera ...... 28
Function Settings with Shooting Menu of the Capture
Window ...................................................................... 30
Items Settable with the Capture Window.................... 31
Setting Picture Styles and Applying to the Camera.... 32
Selecting a Picture Style and Applying to the
Camera................................................................... 32
Changing Picture Style Settings and Applying to the
Camera................................................................... 33
Setting JPEG Quality and Applying to the Camera .... 34
Adjusting White Balance and Applying to the Camera... 35
Setting a Silent Shutter and Applying to the Camera ..... 35
Contents
1
2
3
4
Downloading
Images
Camera
Settings
Remote
Shooting
Preferences
Reference
Index
17
Settings with the Camera Settings Window
Settings specified with the camera settings window are explained here.
Most functions set with the camera settings window requires to be set
before shooting.
3
Click the required setting and specify each one.
Introduction
Contents
your camera and computer, and then start
1 Connect
up EU
.
2 Click [Camera settings].
(p.9)
1
2
3
4
Downloading
Images
Camera
Settings
Remote
Shooting
¿ The camera settings window appears.
O Available settings are displayed for the camera that is connected.
For more details, see “Items Settable with the Camera Settings
Window” (p.19).
O For how to register Picture Style files, lens aberration correction
data, or personal white balance setting, see “Applying Picture
Style Files to the Camera” (p.20), “Registering Lens Aberration
Correction Data for the Lens in the Camera” (p.22), and
“Registering Personal White Balance in the Camera” (p.28)
respectively.
Preferences
Reference
Index
18
Introduction
Items Settable with the Camera Settings Window
Setting
Firmware update
Date/Time/Zone Setting
Register lens aberration
correction data
Register Picture Style File
Owner’s name/Author/
Copyright holder
Personal white balance
settings
WFT Captions
Register Background Music
Web Service Settings
Register IPTC information
*1
*2
Cannot be set with
77D
760D
4000D
M6 Mk II
RP
800D
*3
Cannot be set with 5DS/5DS R 5D Mk III
90D
250D
M6 Mk II
R
RP
.
M50
5DS/5DS R
*4
Can be set with 5D Mk IV
5D Mk IV 5D Mk III
*5
Can be set with 1D X Mk II (firmware version 1.1.0 or later).
R
RP
6D Mk II
6D
M6
1D X Mk II
7D Mk II
90D
M5
1D X
80D
77D
M3
1D C
760D
800D
M10
250D
200D
M100
750D
2000D
1300D
4000D
M6 Mk II
M50




R
7D Mk II
.
Firmware update
O You can display the version of the camera’s firmware.
O You can update the firmware by clicking on this item.
O For more details on updating firmware, refer to the Canon website.
Date/Time/Zone Setting
–
–
O You can set the camera’s date/time and the time zone where images
were shot.
O You can retrieve the computer’s system time to sync the camera’s
date and time.
O You can set and cancel daylight saving time.



Register lens aberration correction data



O You can register lens aberration correction data for the lens to the
camera or delete registered data from the camera (p.22).



Register Picture Style File

–
–
O You can register up to three Picture Style files and saved to your
computer as user-defined settings in your camera (p.20).
*1
*2
*3
*4

–
–
*5
6D Mk II
250D
6D
200D
–
–
–
–
90D
750D
80D
2000D
1
2
3
4
Downloading
Images
Camera
Settings
Remote
Shooting
Preferences
Reference
Index
O You can enter and set up to 31 characters as the camera owner’s
name.
Author
O You can enter and set up to 63 characters or symbols, including a
prefix, as the author’s name.
Copyright holder (copyright information)
M50 .
Cannot be set with 5DS/5DS R 5D Mk IV 5D Mk III
7D Mk II
M50 .
1300D
Owner’s name
Contents
R
O You can enter and set up to 63 characters or symbols, including a
prefix, as the photo creation’s copyright holder (copyright
information).
19
Personal white balance settings
O You can register to the camera a personal white balance file (p.28).
Also, you can save the adjustment results for an image’s white
balance to your computer as a white balance file (extension “.WBD”)
(p.27).
WFT Captions
O You can create captions to be used for the wireless file transmitter’s
“Transfer with caption” and register them to the camera with this
function.
O For more details on WFT caption, refer to the Instruction Manual of
the wireless file transmitter.
Register Background Music
O You can register WAV-format music files, saved to your computer, to
the camera’s memory card as background music. Registered
background music can be played together with a Video Snapshot
Album or slideshow played on the camera (p.81).
Register IPTC information
Introduction
Applying Picture Style Files to the Camera
You can register up to three Picture Style files downloaded from the
Canon website or created with Picture Style Editor (Picture Style file
creating software) (hereinafter PSE) and saved to your computer, as
user-defined settings in your camera.
O Picture Style files created with [Base Picture Style] set to [Fine
Detail] cannot be registered to the cameras which do not have
[Fine Detail] as a preset Picture Style.
O If [Fineness] or [Threshold] in [Sharpness] is set for the Picture
Style file, you cannot register that Picture Style file to the cameras
which do not have [Fine Detail] as a preset Picture Style.
1 Click [Register Picture Style File].
O If this function for adding IPTC* information is equipped with the
camera, you can edit and register IPTC information. IPTC information
is comment information, such as captions, credits, and shooting
location (p.86).
* International Press Telecommunications Council.
Contents
1
2
3
4
Downloading
Images
Camera
Settings
Remote
Shooting
Preferences
Reference
Web Service Settings
Index
O You can register web services to a camera (p.84).
¿ The [Register Picture Style File] dialog box appears.
20
2
Select a tab from one of [User Def. 1] to [User Def. 3].
5
Click the [OK] button.
Introduction
Contents
1
2
3
4
Downloading
Images
3 Click the [
] button.
¿ The Picture Style file is registered in the camera.
Camera
Settings
Remote
Shooting
Preferences
Reference
¿ The [Open] window appears.
a Picture Style file and then click the [Open]
4 Select
button.
¿ The Picture Style file is loaded.
Index
O A Picture Style file is an extended function of Picture Style.
For more details on Picture Style files, refer to the Canon website.
O The Picture Style files that you can apply to the camera are files
with the “.PF2” or “.PF3” extension.
O For details on using PSE, refer to the “Picture Style Editor
Instruction Manual” (PDF electronic manual).
21
Registering Lens Aberration Correction
Data for the Lens in the Camera
2
Select the lens category for which you want to
register correction data.
Register lens data window
You can register lens aberration correction data for the lens to the
camera, or delete registered data from the camera.
You can also register data for the Digital Lens Optimizer
(hereinafter DLO) in some cameras.
For 1D C (firmware version 1.3.0 or later), lens aberration correction
data for EF Cinema lenses (CN-E lenses) can also be registered to the
camera.
R
For
, since lens aberration correction data and DLO lens data
are completely registered to the camera, registration is not required (as
of May, 2018).
1D X Mk II
Introduction
Contents
1
2
3
4
Downloading
Images
Camera
Settings
Remote
Shooting
5D Mk IV
1 Click [Register lens aberration correction data].
Preferences
¿ A list appears showing only the selected lens category.
Reference
Index
¿ The [Register lens aberration correction data] window appears.
22
3
Register correction data.
Registering Lens Aberration Correction Data to the Camera
Lens aberration correction data for lenses available at the time of
releasing the camera to the market are all registered to the camera.
It will not be necessary to register lens aberration correction data to
the camera also for almost all lenses released to the market after
the camera. However, it will be necessary to register lens
aberration correction data to the camera for lenses with which no
check mark is added to the lens aberration correction data column
in the register lens data window. Register data to the camera with
the following method.
O To register lens aberration correction data for lenses to the
camera, checkmark the boxes of lenses for which you want to
register correction data and then click the [OK] button. EU exits.
Introduction
Contents
1
2
3
4
Downloading
Images
Camera
Settings
Remote
Shooting
Icons in the Register Lens Data Window
Left column: camera-registered status of lens aberration
correction data
Check marks will be added to the lenses with their
correction data registered in the camera.
Middle column: computer download status of DLO lens data
: Not downloaded to the computer.
: Already downloaded to the computer.
: Update data is available on the server.
(The update data is not downloaded to the
computer.)
Right column: camera-registered status of DLO lens data
: Not registered to the camera.
: Already registered to the camera.
Preferences
Reference
Index
23
Introduction
Registering DLO Lens Data to the Camera
DLO lens data for lenses available at the time of releasing the
camera to the market are all registered to the camera. However, it
will be necessary to download DLO lens data and register the data
to the camera for lenses released to the market after the camera.
Contents
1 Download DLO lens data to the computer
If DLO lens data is not downloaded to the computer or not
registered to the camera, the DLO icon on the registering screen
appears as [
].
Click the name of the lens you want to register.
¿The DLO lens data is downloaded, and the icon changes to
[
].
1
2
3
4
Downloading
Images
Camera
Settings
2 Register DLO lens data to the camera
Click the [OK] button.
¿The DLO lens data is registered to the camera, and EU exits.
¿[
] appears the next time the register lens data window
is displayed.
Remote
Shooting
Preferences
O If you click the [Cancel] button when step 1 is completed, DLO
lens data is only downloaded to the computer.
O If update data is available on the server, an [
] icon is
displayed. Click the name of the lens, download the update data
to the computer, and then click the [OK] button to register the
data to the camera.
Reference
Index
To use this function, the EOS Lens Registration Tool (version 1.4.20
or later) must be installed.
O For a list of the [Register lens data] window functions, see p.97.
O Lens names displayed in the [Register lens data] window may be
partially shortened depending on the lens type.
O The EF15mm f/2.8 Fisheye and EF8-15mm f/4L USM Fisheye
are not compatible with [Register lens data].
24
90D
250D
RP
M6 Mk II
M50
Lens aberration correction data for all lenses is already registered in the
camera. How to register and delete DLO lens data to and from the
camera is explained here.
2
Select lenses for which you want to register DLO
lens data from the [Lens List] and then click the [OK]
button.
Introduction
Contents
Register lens data window
1 Click [Register lens aberration correction data].
1
2
3
4
Downloading
Images
Camera
Settings
Remote
Shooting
Preferences
¿ The [Register lens data] window appears.
Reference
¿ The DLO lens data for the selected lens is registered in the
camera, and EU exits.
Index
O You can uncheckmark lenses registered in the [Lens List] and
click the [OK] button to delete DLO lens data from the camera.
O The numerical display [xx/xx] at the bottom right of the [Lens List]
are the number of lenses registered/number of lenses that can
be registered in the camera.
O If a lens does not appear in the [Lens List], mounting that lens on
the camera with this display adds the lens to the list.
O You can rearrange the [Lens List] with the [Up] and [Down]
buttons.
O For RF lenses, it is not necessary to register or delete DLO lens
data to or from the camera.
25
EOS cameras other than 1D X Mk II
R
RP
M6 Mk II
5D Mk IV
90D
250D
Introduction
M50
1 Click [Register lens aberration correction data].
Contents
1
2
3
4
Downloading
Images
Camera
Settings
Remote
Shooting
¿ The [Register lens aberration correction data] window appears.
Lenses for which correction data is registered in the camera are
displayed with a check mark.
the lens category for which you want to
2 Select
register correction data.
Preferences
Reference
Register lens aberration correction data window
Index
To use this function, the EOS Lens Registration Tool (version 1.8.20
or later) must be installed.
O You can also add lenses to the [Lens List] with the following
method.
• Click the [Edit Lens List] button and in the window that appears,
checkmark the checkbox for the lens in the list and click the
[OK] button.
O Lens names displayed in the [Register lens data] window may be
partially shortened depending on the lens type.
O The EF15mm f/2.8 Fisheye and EF8-15mm f/4L USM Fisheye
are not compatible with this function.
¿ A list appears showing only the selected lens category.
26
3
Select the lens for which you want to register
correction data and click the [OK] button.
Introduction
Saving White Balance to your Computer
1D X Mk II
1D X
1D C
You can save the adjustment results for an image’s white balance to
your computer as a white balance file (extension “.WBD”). White
balance files saved to your computer can be registered in the camera as
personal white balances (p.28).
Register the white balance adjusted in the [Remote Live View window]
to the camera beforehand.
1 Click [Personal white balance settings].
¿ The correction data for the selected lens is registered in the
camera, and EU exits.
O You can delete correction data from the camera by removing the
check mark from the registered lens and clicking the [OK] button.
O Depending on the camera to be connected, lenses with which
the check mark cannot be removed may be displayed in the
registration window. This indicates that it is not necessary to
register the correction data of the respective lenses to the
camera.
O Not displayed for EF-M lenses, as registration of correction data
is not required.
Contents
1
2
3
4
Downloading
Images
Camera
Settings
Remote
Shooting
Preferences
Reference
Index
¿ The [Personal white balance settings] dialog box appears.
To use this function, the EOS Lens Registration Tool must be installed.
O For a list of the [Register lens aberration correction data] window
functions, see p.97.
O Lens names displayed in the [Register lens aberration correction
data] window may be partially shortened depending on the lens
type.
O The EF15mm f/2.8 Fisheye and EF8-15mm f/4L USM Fisheye
are not compatible with [Register lens aberration correction data].
27
2
Select the white balance to be saved to your
computer and click the [Save] button.
Introduction
Registering Personal White Balance in the Camera
1D X Mk II
1D X
1D C
White balance files created by adjusting the white balance of an image
and saving the results can be registered in the camera as personal
white balances.
window that appears, enter a filename, select a
3 Insavethedestination,
and then click the [Save] button.
1 Click [Personal white balance settings].
¿ The white balance file is saved to your computer.
Contents
1
2
3
4
Downloading
Images
Camera
Settings
Remote
Shooting
Preferences
Reference
¿ The [Personal white balance settings] dialog box appears.
2
Select the personal white balance to be registered
and click the [Open] button.
Index
¿ The [Open] dialog box appears.
28
3
Open the folder containing the saved white balance
file, select the file and then click the [Open] button.
¿ The white balance file is loaded.
O The white balance files that you can register to the camera are
files with the “.WBD” extension.
4 Enter a title into the [Title:] input field.
5 Click the [Apply to camera] button.
¿ The personal white balance is registered on the camera.
O To register another setting, repeat step 2 to step 5.
6 Click the [Close] button.
¿ The [Personal white balance settings] dialog box closes and the
display returns to camera settings window.
a registered personal white balance on the
7 Select
camera.
O Select a registered personal white balance as the white balance.
O For selecting personal white balance or manual white balance,
refer to “Setting the White Balance” in the camera’s Instruction
Manual.
Introduction
Contents
1
2
3
4
Downloading
Images
Camera
Settings
Remote
Shooting
Preferences
Reference
Index
29
Function Settings with Shooting Menu of the Capture Window
Function settings specified with the shooting menu of the capture
window are explained here. Most functions set with the capture window
are those tend to be changed during shooting. This function cannot be
used with
M6
M5
M3
M10
M100 .
3
Click the [
] button.
Introduction
Contents
your camera and computer, and then start
1 Connect
up EU
.
2 Click [Remote shooting].
1
2
3
4
Downloading
Images
(p.7)
Camera
Settings
Remote
Shooting
Preferences
Reference
¿ The capture window appears.
Index
¿ The [Shooting menu] appears.
30
Introduction
4 Click the required setting and specify each one.
Items Settable with the Capture Window
Example of menu display ( 5D Mk III )
5DS/5DS R
Setting
O Available settings are displayed for the camera that is connected.
For more details, see “Items Settable with the Capture Window”.
Picture Style
JPEG Quality
WB (white balance) SHIFT
HDR Mode
Bulb timer settings
Silent shutter
Focus bracketing
*1 Setting is not possible for
200D
*2
750D
2000D
R
RP
6D Mk II
1D X Mk II
6D
7D Mk II
90D
1D X
80D
77D
760D
1D C
800D
250D
200D
750D
2000D
1300D
4000D
M6 Mk II
M50
7D Mk II
90D
250D
RP
Reference

–
–
–
–
*1
*2
*3
*4
–

77D
760D
1300D
4000D
80D
77D
800D
M50
Contents
1
2
3
4



Setting is possible for 5DS/5DS R 5D Mk IV
6D Mk II
5D Mk IV 5D Mk III
Downloading
Images
Camera
Settings
Remote
Shooting
Preferences
.
R
M6 Mk II , but not for
other models.
*3 Setting is possible only for
*4
Setting is possible only for
R
RP
.
Index
90D
M6 Mk II .
Picture Style
O You can set a Picture Style and apply it to the camera, in the same
way as operating from the camera (p.32).
JPEG Quality
O You can set the JPEG image quality and apply it to the camera, in the
same way as operating from the camera (p.34).
Silent shutter
O You can set a silent shutter in the same way as operating from the
camera (p.35).
31
WB (white balance) SHIFT
O You can adjust the white balance, in the same way as operating from
the camera (p.35).
HDR (High Dynamic Range) Mode
O You can shoot photos with a wide dynamic range where clipping in
highlights and shadows has been reduced, and photos that appear
like paintings (p.43).
Bulb timer settings
O You can preset the bulb exposure’s exposure time (p.76).
Focus bracketing
O You can perform focus bracketing in the same way as operating from
the camera (p.45)
Introduction
Setting Picture Styles and Applying to the Camera
You can set and apply Picture Styles to the camera, in the same way as
operating from the camera. You can change the values for [Sharpness],
[Contrast], [Saturation] and [Color tone] of each Picture Style and
register up to three of your own Picture Styles in the camera as userdefined settings.
You can also register Picture Style files in the camera as user-defined
settings you have downloaded from the Canon website or created with
Picture Style Editor (Picture Style file creating software) (hereinafter
PSE) and saved to your computer.
Registering Picture Styles may take some time.
Selecting a Picture Style and Applying to the
Camera
1 Click [Picture Style].
Contents
1
2
3
4
Downloading
Images
Camera
Settings
Remote
Shooting
Preferences
Reference
Index
¿ The [Picture Style] window appears.
O Displayed contents may differ depending on the connected
camera.
32
2
Click the Picture Style to be set in the camera.
Picture Style window
Changing Picture Style Settings and Applying
to the Camera
You can set your own Picture Style [Sharpness], [Contrast], [Saturation]
and [Color tone] and apply them to the camera, in the same way as
operating from the camera.
1
Click [Detail set.].
Introduction
Contents
1
2
3
4
Downloading
Images
Camera
Settings
Remote
Shooting
¿ The setting is applied to the camera and the display returns to
the [Shooting menu].
O Displayed contents may differ depending on the connected
camera.
Preferences
¿ The [Detail set.] dialog box appears.
O Displayed contents may differ depending on the connected
camera.
Reference
Index
R
When 1D C
is connected and Canon Log gamma is set
on the camera, the Picture Style set or changed with this software
will not be reflected to the movie you shoot.
33
2
Set by clicking the pointer on the slider for each
item.
Introduction
Setting JPEG Quality and Applying to the Camera
1D X Mk II
Cursor position
Setting
Default setting
1D X
1D C
You can set the JPEG image quality and apply it to the camera, in the
same way as operating from the camera.
1
Click [JPEG Quality].
Contents
1
2
3
4
Downloading
Images
Camera
Settings
Remote
Shooting
¿ If you select [Monochrome] for the Picture Style (p.32), the [Filter
effect] and [Toning effect] list boxes appear.
O Depending on the connected camera, you may be able to specify
[Fineness] and [Threshold] settings for [Sharpness].
3
Click the [Return] button.
Preferences
¿ The [JPEG Quality] window appears.
2 Click the setting value.
¿ The settings are applied to the camera, and the display returns to
the [Shooting menu].
Reference
Index
¿ The settings are applied to the camera.
O Higher values give a lower compression ratio and higher image
quality for any size.
3 Click [Return].
¿ The display returns to the [Shooting menu].
34
Introduction
Adjusting White Balance and Applying to the Camera
You can adjust white balance, in the same way as operating from the
camera.
1 Click [WB SHIFT].
Setting a Silent Shutter and Applying to the Camera
R
You can set a silent shutter and apply it to the camera in the same way
as operating from the camera. For conditions in which a silent shutter
can be set, check the camera’s specifications.
Contents
¿ The [WB SHIFT] window appears.
1
2
3
4
2 Click the compensation position.
Reference
the [
] button and in the menu that appears,
1 Click
click [Silent shutter].
2 In the dialog box that appears, select [Enable].
¿ [Silent shutter] is set on the camera.
O To cancel the silent shutter, select [Disable] in this dialog box.
Downloading
Images
Camera
Settings
Remote
Shooting
Preferences
Compensates
green
Index
Compensates
blue
Displays the
compensation
value
Compensates
magenta
Compensates
amber
¿ The settings are applied to the camera.
3 Click [Return].
¿ The display returns to the [Shooting menu].
O To revert the corrected values to the original values, follow the
procedure in step 2.
35
3
Remote Shooting by Controlling the Camera from Your Computer
Introduction
From EU, you can control the camera remotely, and by viewing the subject
in the EU window, you can set the camera and shoot. You can also shoot by
directly operating your camera even during remote shooting, or preset a time
allowing the camera to shoot automatically with timer shooting. This function
cannot be used with
M6
M5
M3
M10
M100 .
Remote Live View Shooting ..................................... 37
HDR (High Dynamic Range) Shooting..................... 43
Focus Bracketing ..................................................... 45
Remote Live View Window Functions...................... 46
Focusing Manually..................................................... 46
Focusing Using AF .................................................... 48
Focusing Using Quick Mode.................................. 48
Focusing Using Live Mode .................................... 49
Focusing Using Face Detection Live Mode ........... 50
Focusing Using Face+Tracking ............................. 50
Focusing Using FlexiZone - Multi, Smooth
zone AF, Expand AF area: U/D/L/R, Expand
AF area: Around, Zone AF, Large Zone AF: Vertical,
and Large Zone AF: Horizontal.............................. 51
Checking the Depth of Field and Exposure ............... 52
White Balance with the Remote Live View Window .... 52
Displaying an Electronic Level................................... 53
Changing the Aspect Ratio ........................................ 54
Audio Recording Setting ............................................ 55
Audio Recording/Audio Recording Level ............... 56
Wind Filter Function............................................... 56
Overlaid Display Function.......................................... 57
Enlarging/Reducing an Overlay Image .................. 58
Rotating an Overlay Image .................................... 59
59
60
60
61
61
62
64
Shooting by Operating the Camera ......................... 66
Shooting Movies ...................................................... 67
Timer-controlled Shooting ....................................... 73
Timer Shooting ........................................................... 73
Remote Interval Timer Shooting................................. 73
Remote Bulb Shooting............................................. 75
Remote Bulb Shooting................................................ 75
Setting the Bulb Timer ................................................ 76
Flash Shooting......................................................... 77
Editing Picture Styles Using Remote Live View
Function................................................................... 80
Registering Background Music to a Camera Memory
Card......................................................................... 81
Setting Web Services .............................................. 84
Registering IPTC Information .................................. 86
Setting the Composite Ratio of an Overlay Image .....
Moving an Overlay Image.......................................
Displaying a Different Overlay Image .....................
Hiding an Overlay Image ........................................
Displaying Grid Lines..................................................
Displaying Guide Lines...............................................
Power Zoom Operation ..............................................
Contents
1
2
3
4
Downloading
Images
Camera
Settings
Remote
Shooting
Preferences
Reference
Index
36
Remote Live View Shooting
You can control your camera remotely from EU and shoot still images
from your computer screen.
Also, the shot images are saved directly on your computer and you can
recheck them using the linked software Digital Photo Professional
version 4.x (hereinafter DPP).
This function is effective for shooting large numbers of shots with fixedframing such as for studio shooting.
1
2
Click [Remote shooting].
Introduction
Contents
1
2
3
4
Downloading
Images
Connect your camera and computer, and then turn
the camera’s power switch to < ON >.
Camera
Settings
¿ EU starts up.
Remote
Shooting
¿ The capture window appears.
Preferences
Reference
Index
37
3
*1 If you checkmark [Change settings using mouse wheel on capture
screen] (p.89) on the [Remote Shooting] tab sheet on the
[Preferences], you can also select settings with the scroll-wheel
on your mouse. You cannot use the scroll-wheel in the mirror
lockup menu or under [Image saving location].
Set the camera.
*2 You can click the Exposure level/AEB level item and perform AEB
setting using the <shift> key + scroll-wheel.
Click the setting item, and
select the setting*1 *2
O The settings that cannot be set in the capture window can be set
by operating the camera.
O A warning lamp blinks during the countdown for self-timer
shooting and the countdown time is displayed in the area for the
number of possible shots.
O Mirror lockup settings are available when the camera mode is P,
Tv, Av, M, or B.
O During mirror lockup, the mirror lockup icon blinks.
O With 5DS/5DS R , you can select the release timing after the
mirror lockup to take a picture. Timing can be selected from 1/8
second later, 1/4 second later, 1/2 second later, 1 second later,
and 2 seconds later.
O When shooting with auto exposure, the shutter speed or aperture
blinks to indicate under-exposure or over-exposure conditions.
O When shooting with manual exposure, the metering value is
displayed in real time in the exposure level area.
Introduction
Contents
1
2
3
4
Downloading
Images
Camera
Settings
Remote
Shooting
Preferences
Reference
Index
For a list of the capture window functions, see p.98.
38
4
Click the [
] button.
5
Introduction
Set the Live View function.
O Click [Live View/Movie func. set.].
Contents
Click
1
2
3
4
Downloading
Images
Camera
Settings
O The [Live View/Movie func. set.] window appears.
For details on specifying settings, see the next page.
Remote
Shooting
Preferences
Reference
Index
¿ The [Set-up menu] appears.
39
Introduction
Live View/Movie func. set. window
O Displayed contents may differ depending on the connected
camera.
1D X Mk II 5DS/5DS R
6D
7D Mk II
5D Mk IV 5D Mk III
90D
80D
R
RP
1D X
1D C
Select [Stills] for [LV func. setting] and a setting for [Exposure
simulation], and click the [OK] button.
6D Mk II
M6 Mk II
5DS/5DS R
80D
6D Mk II
5D Mk III
6D
Camera
Settings
90D
77D
760D
1300D
4000D
Remote
Shooting
Click
Select
800D
250D
200D
750D
2000D
Select [Enable] for [LV func. setting] and then click the [OK] button.
Select
Select
O
1
2
3
4
Downloading
Images
Select [Enable] for [LV func. setting] and the setting for [Exposure
simulation], then click the [OK] button.
1D X Mk II 5D Mk IV 7D Mk II
Contents
Preferences
Click
Reference
Click
90D
You cannot set [LV func. setting] and [Exposure simulation] at the
same time.
Specify settings by the following steps.
1. In this dialog box, set [LV func. setting] to [Enable] and then
click the [OK] button
2. Click the [Live View shoot.] button in the capture window (p.41)
3. Follow the procedure from step 4 to step 5 for “Remote Live
View Shooting” (p.39) again
4. In this dialog box, select the setting for [Exposure simulation]
and then click the [OK] button
Since the [Remote Live View window] has already appeared in 2.
above, skip step 6 on p.41 and go to step 7 (p.42).
Index
Click
Select
R
RP
M6 Mk II
M50
Select the setting for [Exposure simulation] and then click the [OK]
button.
40
Introduction
6 Click the [Live View shoot.] button.
Contents
1
2
3
4
Downloading
Images
¿ The [Remote Live View window] appears.
Camera
Settings
Remote Live View window
Remote
Shooting
Preferences
Exposure simulation
Exposure simulation simulates and displays the image with a
brightness close to the actual resulting image.
O Enable
The displayed image brightness will be close to the actual
brightness (exposure) of the resulting image. If you set exposure
compensation, the image brightness will change accordingly.
O Disable
The image is displayed at the standard brightness to make
the Live View image easy to see. Even if you set exposure
compensation, the image is displayed at the standard
brightness.
O Enable (DOF preview)
Normally, the image is displayed at the standard brightness
to make the Live View image easy to see. The image will be
displayed close to the actual brightness (exposure) of the
resulting image only while you hold down the depth-of-field
preview button.
Reference
Index
41
7
Click the [
] button to shoot.
¿ The shot image is transferred to your computer and displayed in
the [Quick Preview] window. Then, DPP starts up automatically.
O You can quickly review the shot image in the [Quick Preview]
window displayed before DPP starts up. You can also resize the
[Quick Preview] window.
O You can show/hide the [Quick Preview] window by clicking the
[Other Functions] button in the capture widow and selecting
[Quick Preview] from the menu that appears.
Introduction
O You can shoot by operating the capture window, even if the
[Remote Live View window] is not displayed.
O To perform exposure simulation (p.52) with [Remote Live View
window] or enable display of histograms (p.101), set your
camera’s [Exposure simulation] in the menu to [Enable].
O You can also use mirror lockup with remote shooting. (Mirror
lockup is not possible during Remote Live View shooting.)
O Self-timer shooting is possible.
O You can change the software that starts up automatically when
remotely shot images are transferred to your computer from DPP
to other software in preferences ([Linked Software] window)
(p.90).
O For a list of the [Remote Live View window] functions, see p.101.
O For a list of the [Zoom View] window functions, see p.103.
Contents
1
2
3
4
Downloading
Images
Camera
Settings
Remote
Shooting
Preferences
Reference
Index
O When shooting after focusing on the Remote Live View window,
change the AF/MF switch button on the capture window to [MF]
beforehand.
O You cannot perform RAW processing. If you connect the camera
to your computer during in-camera RAW processing, the camera
and computer will connect after the processing is finished.
O Options for Basic Zone modes cannot be set to cameras
equipped with Basic Zone modes on their Mode Dials.
You can also shoot using the <space> bar on the keyboard.
42
HDR (High Dynamic Range) Shooting
5DS/5DS R
7D Mk II
5D Mk IV 5D Mk III
90D
80D
R
RP
6D Mk II
6D
M6 Mk II
You can shoot photos with a wide dynamic range where clipping in
highlights and shadows has been reduced, and photos that appear like
paintings. This is suited for scenes such as still-life and landscape. In
HDR shooting, one shot is taken using three images shot with different
exposures (negative exposure, standard exposure, positive exposure),
and they are combined into a single image automatically. Shot HDR
images are recorded in JPEG quality.
* HDR stands for High Dynamic Range.
1 Set to HDR.
O Select [HDR Mode] in the [Shooting menu], and in the dialog box
that appears, specify the required settings and click the [OK] button.
O [Adjust dynamic range]: Sets the range of adjustment for dynamic
range. Select from [Disable HDR], [Auto], [±1 EV], [±2 EV], and
[±3 EV]. When selecting [Auto], the range of adjustment will be
set automatically depending on the image’s overall tonal range.
The higher the number, the wider the dynamic range will be.
O [Effect] 5DS/5DS R 5D Mk IV 5D Mk III
R
RP
6D Mk II
7D Mk II
90D
80D
M6 Mk II : Selects the finishing effect.
For specific finishing effects, refer to the pages about HDR (High
Dynamic Range) shooting in the Instruction Manual provided with
your camera.
O [Continuous HDR]: If [1 shot only] is selected, HDR shooting is
cancelled automatically after you finish shooting. If you select
[Every shot], HDR shooting is continued until you select [Disable
HDR] in [Adjust dynamic range].
O [Save source images] 5DS/5DS R 5D Mk IV 5D Mk III
R
7D Mk II : To save the three shot images and the completed HDR
image, select [All images]. To save only the completed HDR
image, select [HDR image only].
Introduction
Contents
1
2
3
4
Downloading
Images
Camera
Settings
Remote
Shooting
Preferences
Reference
Index
O Displayed contents may differ depending on the connected camera.
43
2
Introduction
Take a shot.
Contents
1
2
3
4
Downloading
Images
Camera
Settings
Remote
Shooting
O The HDR mode cannot be set if you use any of the following
functions: AEB, white balance bracketing, Multi Shot Noise
Reduction, multiple exposures, flash exposure, remote bulb
shooting, or movie shooting.
O HDR shooting of a moving subject is not recommended because
the movement of the subject will appear as afterimages in the
merged image. HDR shooting is recommended for still subjects.
O In HDR shooting, 3 images are captured with different shutter
speeds set automatically. Therefore, even in Tv and M shooting
modes, the shutter speed will be shifted based on the shutter
speed set.
O To prevent camera shake, the ISO speed may be set higher than
usual.
O Auto image alignment may not work properly with repetitive
patterns (lattice, stripes, etc.) or flat, single-tone images.
O The color gradation of the sky or white walls may not be
reproduced correctly. Irregular colors or noise may appear.
O With HDR shooting, the three images will be merged after you
take a picture. Therefore, it will take a longer time to record the
HDR image than with normal shooting. During the merging of the
images, “BUSY” will be displayed on the camera and you cannot
take another picture until the merging is completed.
Preferences
O Using a tripod is recommended. For handheld shooting, using a
fast shutter speed is recommended.
O If [Auto Image Align] is set to [Enable] and the HDR picture is
shot handheld, the edges of the photos will be cropped, lowering
the resolution slightly. Also, if the images cannot be aligned
properly due to camera shake, etc., auto image alignment may
not take effect. Note that when shooting with excessively bright
or dark exposure settings, auto image alignment may not work
properly.
O If you perform handheld HDR shooting while [Auto Image Align]
is set to [Disable], the 3 images may not be properly aligned and
the HDR effect may be minimal.
O HDR shooting under fluorescent or LED lighting may result in
unnatural color reproduction of the illuminated areas.
O In HDR mode, the options dimmed in the menu cannot be set.
Note that when you set HDR mode, for Auto Lighting Optimizer,
highlight tone priority, and exposure simulation, [Disable] will be
applied for shooting.
Reference
Index
44
Focus Bracketing
RP
90D
M6 Mk II
Focus bracketing enables continuous shooting with the focal distance
changed automatically after a single shot. From these images, you can
create a single image in focus over a wide area by using an application
that supports depth compositing, such as Digital Photo Professional.
Be sure to check the cautions for focus bracketing in the Instruction
Manual provided with your camera before shooting.
1 Set focus bracketing.
O Select [Focus bracketing] in [Shooting menu], set each item in
the window that appears, and then click the [OK] button.
O [Number of shots]: Specify the number of images captured per
shot. Can be set in a range of 2-999.
O [Focus increment]: The range of focus shift is automatically set to
suit the selected value and the aperture value at the time of
shooting.
O [Exposure smoothing]: You can suppress changes in image
brightness during focus bracketing by setting to [Enable].
2 Take a shot.
O Focus at the nearer end of your preferred focal range, and then
click the [
] button.
O Once shooting begins, remove the cursor from the [
] button.
O The camera shoots continuously, shifting the focal position
toward infinity.
O Shooting ends after your specified number of images, or at the
far end of the focal range.
Introduction
Contents
1
2
3
4
Downloading
Images
Camera
Settings
Remote
Shooting
Preferences
Reference
Index
45
Remote Live View Window Functions
These pages explain the functions available in the [Remote Live View
window], including checking the camera settings and focusing while
viewing your subject on the computer screen.
See also the list of [Remote Live View window] functions at the end of
this manual (p.101, p.102).
When shooting after focusing on the Remote Live View window,
change the AF/MF switch button on the capture window to [MF]
beforehand.
3
Drag [
Introduction
] to the section you want to enlarge.
Contents
Camera
Settings
Focusing Manually
You can focus manually while viewing the enlarged image in the
[Remote Live View window].
1 Set the lens’s focus mode switch to < AF >.
[Live mode], [FlexiZone - Single], [1-point AF],
2 Select
[Live 1-point AF] or [Spot AF] from the list box.
1
2
3
4
Downloading
Images
Drag
Remote
Shooting
O You can also click the section you want to enlarge to move [
].
Preferences
Reference
Index
O If the [Continuous AF] checkbox is displayed, uncheckmark the
checkbox.
46
4
Click the [
] or [
] button.
5
Introduction
Adjust the focus.
Contents
O When 5DS/5DS R is connected, the [
] and [
] buttons are
displayed as [
] and [
] buttons.
¿ The section you selected in step 2 is displayed enlarged in the
[Zoom View] window.
1
2
3
4
Downloading
Images
Closer
Further away
Zoom View window
Camera
Settings
Remote
Shooting
O[
], [
] : Adjustment Large amount
O[
], [
] : Adjustment Medium amount
O[
], [
] : Adjustment Small amount
¿ The [Remote Live View window] changes in real time according
to the focus position adjustment.
Preferences
Reference
Index
O To move the display position in the [Zoom View] window, click on
[
], [
], [
], [
]. You can also move the display position
by dragging the window.
O You can also double-click the section you want to enlarge in step
2 to display an enlarged view at 5 times (when 5DS/5DS R is
connected, at 6 times) in the [Zoom View] window.
O Double-click an image in the [Zoom View] window to return to the
[Remote Live View window].
You can also focus using a key operation on the keyboard.
Adjustment
Closer
Further away
Large amount
<
>+< I >
<
>+< O >
Medium amount
<
>+< K >
<
>+< L >
Small amount
<
>+< < >
<
>+< > >
47
Focusing Using AF
In Quick, Live, Face Detection Live, and other AF modes, images can
be focused automatically in the same way as on the camera itself.
3
Click the AF point in the position where you want to
focus.
Introduction
Contents
Focusing Using Quick Mode
1D X
1
1D C
5D Mk III
6D
2000D
1300D
1
2
3
4
Downloading
Images
4000D
Select [Quick mode] from the list box.
Click
Camera
Settings
Remote
Shooting
¿ The AF points appear.
O Selectable options differ depending on the connected camera.
O You can switch between showing and hiding the AF points by
clicking the [
] button.
2
Select an AF point selection method from the list
box.
O If [Automatic selection] is selected in step 2, all the AF points are
automatically selected.
O If [Manual selection] is selected in step 2, only the selectable AF
points are displayed.
4 Click the [ON] button.
Preferences
Reference
Index
¿ AF is executed.
¿ When focus is achieved, the camera makes a beeping sound
and the AF point color changes.
O Selectable items differ depending on the camera settings.
If [Orientation linked AF point] is set to [Select separate AF points],
set it to [Same for both vert/horiz]. When [Select separate AF
points] is set, focusing with AF in the [Remote Live View window]
may not be performed properly.
O Double-clicking an AF point also performs AF.
O To cancel AF operation, click the [OFF] button.
48
Focusing Using Live Mode
1
Select [Live mode], [FlexiZone - Single], [1-point AF],
[Live 1-point AF] or [Spot AF] from the list box.
2
Drag the enlargement display frame to move it to the
position where you want to focus.
Introduction
Contents
1
2
3
4
Downloading
Images
Drag
Camera
Settings
 The AF point appears.
R
 On 5DS/5DS R
750D
M6 Mk II
M50
RP
7D Mk II
90D
Remote
Shooting
760D
250D , you can set continuous AF
to on/off with the [Continuous AF] checkbox. When shooting
movies, the [Continuous AF] checkbox changes to the [Movie
servo AF] on/off checkbox.
80D
77D
800D
With 1D X Mk II 5D Mk IV 6D Mk II
200D , the [Movie Servo AF] checkbox is displayed when
shooting movies, allowing movie servo AF on/off to be selected.
 You can switch between showing and hiding the AF point by
clicking the [
] button.
 You can also click the position where you want to focus to move
the enlargement display frame.
3 Click the [ON] button.
Preferences
Reference
Index
 AF is executed.
 When focus is achieved, the camera makes a beeping sound
and the AF point turns green.
 If focus is not achieved, the AF point turns red.
49
Focusing Using Face Detection Live Mode
1D X
1
1D C
5D Mk III
6D
2000D
1300D
4000D
Select [Face Detection Live mode] or [Face live
mode] from the list box.
Introduction
Focusing Using Face+Tracking
1D X Mk II
5DS/5DS R
5D Mk IV
90D
80D
77D
750D
M6 Mk II
M50
760D
R
RP
800D
6D Mk II
250D
7D Mk II
200D
[Face detection + Tracking AF] from the
1 Select
[Focus] list box.
 When a face is detected, an AF point appears.
 When there is a face other than the face detected in the scene,
a new AF point appears if you move the cursor to the position of
the other face. The AF point is selected by clicking that position.
 You can switch between showing and hiding the AF point by
clicking the [
] button.
2 Click the [ON] button.
 When a face is detected, an AF point appears.
 The AF point also tracks the face if the face moves.
 When there is a face other than the face detected in the scene,
a new AF point appears if you move the cursor to the position of
the other face. The AF point is selected by clicking that position.
 You can set continuous AF to on/off with the [Continuous AF]
checkbox on cameras other than 1D X Mk II 5D Mk IV 6D Mk II
80D
77D
800D
200D . When shooting movies, the
[Continuous AF] checkbox changes to the [Movie servo AF] on/
off checkbox.
With 1D X Mk II 5D Mk IV 6D Mk II
80D
77D
800D
200D , the [Movie servo AF] checkbox is displayed when
shooting movies, allowing movie servo AF on/off to be selected.
250D
R
RP
M6 Mk II
M50 ,
 With 90D
you can select [Eye Detection AF] on/off.
 You can switch between showing and hiding the AF point by
clicking the [
] button.
Contents
1
2
3
4
Downloading
Images
Camera
Settings
Remote
Shooting
Preferences
Reference
Index
 AF is executed.
 When focus is achieved, the camera makes a beeping sound
and the AF point turns green.
 If focus is not achieved, the AF point turns red.
 If the camera cannot detect a face, the AF point is fixed to the
center to focus.
50
2
Click the [ON] button on the [Focus] list box.
 AF is executed.
 When focus is achieved, the camera makes a beeping sound
and the AF point turns green.
 If focus is not achieved, the AF point turns red.
80D
760D
 1D X Mk II 5DS/5DS R 5D Mk IV 7D Mk II
200D
750D : If a face is not detected, the mode changes to
[FlexiZone-Multi], [Smooth zone AF] (p.51), [FlexiZone - Single]
or [Live 1-point AF] (p.49).
R
RP : If a face is not detected, the entire AF area is

used for auto selection AF.
Focusing Using FlexiZone - Multi, Smooth
zone AF, Expand AF area: U/D/L/R, Expand AF
area: Around, Zone AF, Large Zone AF:
Vertical, and Large Zone AF: Horizontal
5D Mk IV
R
RP
6D Mk II
7D Mk II
90D
80D
77D
760D
800D
250D
200D
750D
M6 Mk II
M50
These AF modes allow focus to be easily achieved on moving subjects.
For details on AF modes, refer to the Instruction Manual for the camera
that is connected.
1
Select an AF mode from the [Focus] list box.
 An AF point appears.
 You can click in the window to select an AF point or zone
according to the AF mode. To cancel a selection, select an AF
mode again from the [Focus] list box.
 You can set continuous AF to on/off with the [Continuous AF]
80D
checkbox on cameras other than 5D Mk IV 6D Mk II
77D
800D
200D . When shooting movies, the
[Continuous AF] checkbox changes to the [Movie servo AF] on/
off checkbox.
With 5D Mk IV 6D Mk II
80D
77D
800D
200D ,
the [Movie servo AF] checkbox is displayed when shooting
movies, allowing movie servo AF on/off to be selected.
 You can switch between showing and hiding the AF point by
clicking the [
] button.
Introduction
Contents
1
2
3
4
Downloading
Images
Camera
Settings
Remote
Shooting
Preferences
Reference
Index
2 Click the [ON] button on the [Focus] list box.
 AF is executed.
 When focus is achieved, the camera makes a beeping sound
and the AF point turns green.
 If focus is not achieved, the AF point turns red.
51
Introduction
Checking the Depth of Field and Exposure
You can check the depth of field and exposure in the [Remote Live View
window].
Click the [ON] button.
White Balance with the Remote Live View Window
You can change the white balance of an image in the [Remote Live View
window] and register the changed white balance in the camera.
1 Select the white balance to apply to the image.
Contents
1
2
3
4
Downloading
Images
Camera
Settings
Remote
Shooting
Preferences
¿ The aperture is stopped down (exposure simulation) to the
aperture set in the capture window (p.98).
¿ The selected white balance is applied to the image displayed in
real time and you can check it in the [Remote Live View window].
2 Checkmark [Apply to shot images].
Reference
Index
¿ The selected white balance is registered in the camera as a
personal white balance and applied to images that will be taken.
52
Introduction
Displaying an Electronic Level
1D X Mk II
1D X
1D C
5DS/5DS R
6D
7D Mk II
90D
80D
5D Mk IV 5D Mk III
77D
760D
800D
R
RP
M6 Mk II
6D Mk II
M50
You can display an electronic level in the [Remote Live View window] to
check the tilt of the camera.
1
Click the [
Contents
1
2
3
4
Downloading
Images
] button in the [Remote Live View window].
Camera
Settings
¿ An electronic level is displayed in the [Remote Live View window].
2 Check the tilt of the camera.
Remote
Shooting
O Displayed contents may differ depending on the connected camera.
Horizontal level
Position of camera top
Vertical level
Vertical reference
Camera’s vertical position
Preferences
Reference
Index
O To adjust horizontal tilt, move the camera so the camera’s horizontal
position and the horizontal reference match.
1D C
5DS/5DS R 5D Mk IV 5D Mk III
R
O 1D X Mk II 1D X
RP
6D Mk II 7D Mk II M6 Mk II
M50 : To adjust vertical tilt, move
the camera so the camera’s vertical position and the vertical reference match.
O To hide the level, click the [
] button again.
Horizontal
reference
Camera’s horizontal
position
* One horizontal increment is equal to 10°, and one vertical increment is
equal to 5°.
O During movie shooting, the electronic level will not be displayed.
O Even when tilt is corrected, there may be a margin of error of
approx. ±1°.
O If the camera is very tilted, the electronic level’s margin of error
will be bigger.
53
Changing the Aspect Ratio
As with the camera’s Live View function, it is possible to shoot with a
feeling similar to film-type medium-format/large-format cameras such as
6 x 6 cm, 6 x 4.5 cm and 4 x 5 inches. Depending on the connected
camera, there are the following differences.
1D C
O 1D X Mk II 1D X
For both RAW and JPEG images, aspect ratio information is only
attached with the shot image, and the image is not cropped.
R
O 5DS/5DS R 5D Mk IV 5D Mk III
(other than when [1.6x (crop)]
is set) 7D Mk II
You can select the two following modes.
[Add aspect ratio information]: JPEG images shot in this mode are
cropped.
[Add cropping information]: Aspect ratio information is only
attached, and the JPEG images shot
are not cropped.
With either mode, RAW images will only have aspect ratio information
attached to them, and they will not be cropped.
O
RP
(other than when [1.6x (crop)] is set) 6D Mk II
90D
80D
77D
760D
800D
250D
750D
2000D
1300D
4000D
M6 Mk II
M50
6D
RP
1D X
1D C
RP
6D Mk II
6D
90D
80D
77D
760D
800D
200D
750D
2000D
1300D
4000D
M6 Mk II
M50
1 Click the [
250D
Contents
] button and select the aspect ratio.
O To revert the aspect ratio to its default, click the [
] button.
RP (other than when [1.6x (crop)] is set) 6D Mk II
For
90D
80D
77D
760D
800D
250D
,
select the original aspect ratio. For other cameras, select [Off].
200D
1
2
3
4
Downloading
Images
2 Move the camera and compose your picture.
6D
Introduction
750D
2000D
1300D
4000D
M6 Mk II
M50
Camera
Settings
Remote
Shooting
Preferences
Reference
200D
For a RAW image, aspect ratio information is only attached with the
shot image, and the image is not cropped. For a JPEG image, the
image is cropped.
R
For
(crop)] is set.
(other than when [1.6x (crop)] is set)
1D X Mk II
Index
, this function cannot be used when [1.6x
54
5DS/5DS R
5D Mk IV
5D Mk III
R
(other than when [1.6x (crop)]
is set) 7D Mk II
1 Click the [
3
Move the camera and compose your picture.
] button.
¿ The [Specify Aspect Ratio/Cropping Info] dialog box appears.
[Add aspect ratio information] or [Add cropping
2 Set
information].
Introduction
Contents
Audio Recording Setting
You can set the audio recording level when shooting movies in Remote
Live View shooting.
This function can be set only when the camera is in P, Tv, Av, M, B, or Fv
shooting mode. Also refer to the pages related to “Setting the Sound
Recording” in your camera’s Instruction Manual.
Audio recording cannot be set on 2000D 1300D 4000D .
the [Settings] button in the audio recording
1 Click
area of the [Remote Live View window].
1
2
3
4
Downloading
Images
Camera
Settings
Remote
Shooting
Preferences
O [Add aspect ratio information] mode crops the JPEG images
shot.
O [Add cropping information] mode only attaches aspect ratio
information to the JPEG images shot without cropping them.
O With either [Add aspect ratio information] or [Add cropping
information] selected, RAW images will only have aspect ratio
information attached to the shot images, and they will not be
cropped.
O Only either one of [Add aspect ratio information] and [Add
cropping information] can be set. When one mode is set, the
other mode will be set to its default automatically.
O 5D Mk IV When [Add cropping information] is set to other than its
default, you cannot set [Add aspect ratio information]. Set [Add
cropping information] to its default to set [Add aspect ratio
information].
O Clicking the [Close] button completes the setting.
Reference
¿ The [Recording settings] window appears.
Index
55
2
Audio Recording/Audio Recording Level
Specify settings.
[Auto]:
Sound recording list box
Wind filter function
Audio recording level
slider
Level meter
The audio recording level is adjusted automatically
according to the volume of the sound. When [Auto] is
selected, you can only set the Wind filter function.
[Manual]: Function for advanced users. You can adjust the audio
recording level as desired.
Drag the audio recording level slider while checking the
level meter to adjust the audio recording level. When the
volume is loud, refer to the peak hold function (approx. 3
seconds) while adjusting so that the right side of “12” on
the level meter (-12 dB) lights intermittently. Exceeding
“0” results in sound cracking.
[Disable]: Sound is not recorded.
Introduction
Wind Filter Function
O Select [Auto], [Manual], or [Disable] from the list box.
O When setting is completed, click the [Close] button to close the
[Recording settings] window.
O An attenuator settings box appears when 1D X Mk II 5DS/5DS R
5D Mk IV
R
RP
6D Mk II
6D
7D Mk II
90D
is
connected. In conditions with much loud sound, sound cracking
may occur even when shooting with [Sound recording] set to
[Auto] or [Manual]. If there is sound cracking, it is recommended
that you checkmark the attenuator function box to enable the
attenuator function.
O When 250D M6 Mk II M50 is connected, you can select
from [Auto], [Disable], or [Enable] to set the attenuator.
80D
77D
760D
800D
250D
200D
750D
When you want to reduce the sound of the wind recorded while
shooting outdoors, checkmark the Wind filter function box to enable
the Wind filter function. It will function only when using a built-in
microphone. However, when enabled, low bass sounds are also
partially reduced, and it is recommended that you remove the
check mark from this box in locations with no wind, to disable the
Wind filter function.
Contents
1
2
3
4
Downloading
Images
Camera
Settings
Remote
Shooting
Preferences
Reference
Index
56
Overlaid Display Function
An image saved in your computer can be overlaid on top of the image
displayed in the [Remote Live View window]. As this function allows you
to accurately align angles, it is useful when shooting several images at
the same angle, such as when shooting product photos. Images loaded
from your computer are only displayed, and are not included in the shot.
2
Select the image you want to display as an overlay
and click the [Open] button.
Introduction
Contents
1
2
3
4
Downloading
Images
the [Compose] tab sheet in the [Remote Live
1 Select
View window] and click the [Open] button in
Camera
Settings
[Overlay].
¿ The [Open] dialog box appears.
O RAW*, JPEG, TIFF, BMP (bitmap), and GIF images can be
displayed as an overlay.
* • Only RAW images with the extension “.CR2” or “.CR3” shot
with a Canon camera can be displayed as an overlay.
• Even if the image has been adjusted with Digital Photo
Professional version 4.x, the overlaid image will be displayed
in the condition when it was shot.
O Even with supported image file types, the display of the image as
an overlay may not be possible.
¿ [Show overlay image] is checkmarked, and the selected image is
displayed as an overlay in the [Remote Live View window].
Remote
Shooting
Preferences
Reference
Index
¿ The [Open] dialog box appears.
57
Enlarging/Reducing an Overlay Image
An image displayed as an overlay (the overlay image) can be enlarged/
reduced from 25 to 200%. Use the Enlarge/Reduce slider to set the
enlargement or reduction.
Drag the Enlarge/Reduce slider left or right.
Introduction
Contents
1
2
3
4
Downloading
Images
Camera
Settings
Remote
Shooting
O An overlaid image (the overlay image) can be displayed
enlarged/reduced, rotated, or with its composite ratio adjusted
(p.59).
the camera and subject to compose your
3 Move
picture.
O You cannot use the Overlaid Display function in the [Zoom View]
window.
Preferences
¿ The enlargement/reduction set with the Enlarge/Reduce slider is
applied to the overlaid display.
O You can also set the enlargement/reduction by entering a value
directly.
O You can also move the cursor over the slider, click, and then
press the <> or <> key on the keyboard or use the scrollwheel on your mouse to set the enlargement/reduction.
O Clicking the [Reset] button resets the image to its default state.
Reference
Index
58
Rotating an Overlay Image
An image displayed as an overlay (the overlay image) can be rotated
from -180° to +180°. Use the Rotate slider to set the rotation.
Drag the Rotate slider left or right to set.
Setting the Composite Ratio of an Overlay
Image
The composite ratio (transparency) of an image displayed as an overlay
(the overlay image) can be set from 0 to 100%. Use the Composite
Ratio slider to set the composite ratio.
Drag the Composite Ratio slider left or right to set.
Introduction
Contents
1
2
3
4
Downloading
Images
Camera
Settings
Remote
Shooting
Preferences
¿ The rotated angle set with the Rotate slider is applied to the
overlaid display.
O You can also set the rotated angle by entering a value directly.
O You can also move the cursor over the slider, click, and then
press the <> or <> key on the keyboard or use the scrollwheel on your mouse to set the rotated angle.
O Clicking the [Reset] button resets the image to its default state.
¿ The composite ratio set with the Composite Ratio slider is
applied to the overlaid display.
O You can also set the composite ratio by entering a value directly.
O You can also move the cursor over the slider, click, and then
press the <> or <> key on the keyboard or use the scrollwheel on your mouse to set the composite ratio.
O Clicking the [Reset] button resets the image to its default state.
Reference
Index
59
Moving an Overlay Image
Displaying a Different Overlay Image
An image displayed as an overlay (the overlay image) in the [Remote
Live View window] can be moved to a new position. You can also use
the cursor of your mouse to enlarge/reduce or rotate the image.
An image displayed as an overlay (the overlay image) can be changed
to another image.
1
Click the [Move overlay image] button.
1 Click the [Open] button in [Overlay].
Introduction
Contents
1
2
3
4
Downloading
Images
Camera
Settings
Remote
Shooting
Preferences
¿ The [Open] dialog box appears.
2
Drag the cursor of your mouse over the overlay
image.
¿ The overlay image is moved to a new position.
O You can drag the cursor of your mouse in the [Remove Live View
window] in the area outside the overlay image to rotate it.
O You can drag the cursor of your mouse in the corners of the
overlay image to enlarge or reduce it.
O Clicking the [Reset] button resets the image to its default state.
the image you want to switch to in the [Open]
2 Select
dialog box and click the [Open] button.
Reference
¿ The image that was displayed changes to the selected image.
Index
60
Hiding an Overlay Image
Hide an image displayed as an overlay (the overlay image).
1
Remove the check mark from [Show overlay image].
¿ The overlay image is hidden.
Introduction
Displaying Grid Lines
You can display grid lines in the [Remote Live View window] in the same
way as the camera’s Live View function, to check the camera’s
horizontal/vertical alignment.
the [Compose] tab sheet and checkmark
1 Select
[Show grid] in [Grid].
Contents
1
2
3
4
Downloading
Images
Camera
Settings
Remote
Shooting
Preferences
Reference
O Checkmarking [Show overlay image] redisplays the overlay
image.
Index
¿ Grid lines are displayed in the [Remote Live View window].
61
2
Select a display method for the grid lines from the
[Grid] list box.
Introduction
Displaying Guide Lines
You can display guide lines in the [Remote Live View window] and
locate them anywhere for alignment of the subject.
the [Compose] tab sheet and checkmark
1 Select
[Show Guides] in [Guides].
Contents
1
2
3
4
Downloading
Images
Camera
Settings
O By selecting [Customize grid], you can set the following items.
• Number of grid blocks vertically and horizontally (2-90)
• Grid line thickness (1-10)
• Grid color
• Show/hide diagonal lines
Remote
Shooting
the camera to check its horizontal/vertical
3 Move
alignment.
Preferences
O To hide the grid lines, remove the check mark from [Show grid].
Reference
¿ Guide lines appear in the [Remote Live View window].
O Guide lines cannot be displayed during enlarged display.
Index
62
O By clicking the [Detailed settings] button, you can set the
following items for guide lines in the dialog box that appears.
• [Color]: Click the [Choose] button and select the color of the
lines in the dialog box that appears.
• [Width]: Choose a value between 1 and 10 for the width of the
guide lines.
• [Display aspect ratio while moving guides] checkbox:
Checkmark this option to display the aspect ratio indication of
the center box formed by the guide lines when moving them.
• [Target ratio]: If the checkbox above is checkmarked, and you
change the ratio in [Target ratio], the aspect ratio of the center
box formed by the guide lines is displayed with the changed
ratio.
Clicking the [OK] button completes the setting and the dialog box
closes.
2
Drag the guide lines to the desired position on the
screen.
O You can drag vertical and horizontal line intersections to change
the size of the center box formed by the guide lines and maintain
the same aspect ratio.
O You can hold the <Shift> key and drag to move the center box
formed by the guide lines and maintain the same aspect ratio
and size.
O You can also enter values between 0.0 and 100.0 in the [1:] and
[2:] boxes in [Horizontal ( 0.0 - 100.0 )] and [Vertical ( 0.0 - 100.0 )]
to move the guide lines.
O If the [Display aspect ratio while moving guides] checkbox is
checkmarked in the dialog box that appears by clicking the
[Detailed settings] button, an aspect ratio indication and the
direction toward the target ratio are displayed when moving the
guide lines.
3 Move and position the camera.
O To hide the guide lines, uncheckmark [Show Guides].
Introduction
Contents
1
2
3
4
Downloading
Images
Camera
Settings
Remote
Shooting
Preferences
Reference
Index
Drag
63
Power Zoom Operation
90D
80D
77D
800D
250D
200D
When a lens mounted with Power zoom adapter PZ-E1 is attached to
a supported camera, you can use power zooming in the [Remote Live
View window].
1
Select the [Live View] tab and click the [PZ] button.
¿ The [Power Zoom Control] window appears.
2
Select the mode from the [Variable speed] tab or
[Constant speed] tab.
Variable speed mode
Introduction
Use power zooming.
Constant speed mode
Variable speed mode: Zoom at changeable speeds.
Constant speed mode: Zoom at a constant speed.
3 Variable speed mode
Contents
Zoom lever
Speed level switch
Zooming:
Move the zoom lever toward [W] to zoom to wide-angle.
Move the zoom lever toward [T] to zoom to telephoto.
Changing zoom speed levels:
You can change speeds with the speed level switch.
Setting this to [SLOW] provides a slow zoom, suitable for movie
shooting.
Setting this to [FAST] provides a faster zoom than [SLOW].
Varying the zoom speed during zooming:
You can adjust the zoom speed with the zoom lever by the amount
of its movement. Moving the lever slightly left or right provides a
slow zooming. The more you move the lever to right or left side,
the more the zoom speed increases.
1
2
3
4
Downloading
Images
Camera
Settings
Remote
Shooting
Preferences
Reference
Index
O Variable speed mode is selected by default.
64
Introduction
Constant speed mode
Contents
Speed level switch
1
2
3
4
Downloading
Images
Zooming:
Click the [W] button to zoom to wide-angle.
Click the [T] button to zoom to telephoto.
Camera
Settings
Changing zoom speed levels:
You can change speeds with the speed level switch.
Setting this to [SLOW] provides a slow zoom, suitable for movie
shooting.
Setting this to [FAST] provides a faster zoom than [SLOW].
Remote
Shooting
Micro-adjusting zoom speed:
You can finely adjust the speed in one of 15 levels for either
[FAST] or [SLOW] speeds with the [Speed level] list box.
Preferences
Reference
O If zooming stops, check the message that appears in the [Power
Zoom Control] window.
O Shooting a few test movies is recommended where you will
perform zooming during movie shooting. Zooming during movie
shooting may result in recording of changes in exposure or
mechanical sound of the lens, or may cause images to be out of
focus.
O For more cautions for using the power zoom adapter, refer to the
power zoom adapter instruction manual.
In constant speed mode, if the mouse cursor is in either the [Power
Zoom Control] window or the [Remote Live View window], press
<W> on the keyboard for wide angle and <T> for telephoto
zooming.
Index
65
Shooting by Operating the Camera
Even when remote shooting is set, you can still operate the camera and
shoot – as when shooting with only the camera. Also, since the shot
images are saved to your computer’s hard disk, you can shoot large
quantities without having to worry about the capacity of the memory card.
1 Display the capture window .
2 Press the camera’s shutter button and take a shot.
Introduction
Contents
(p.37)
¿ The shot images are transferred to the computer, DPP starts up
automatically, and the shot images are displayed.
1
2
3
4
Downloading
Images
Camera
Settings
Remote
Shooting
Preferences
Reference
Index
66
Shooting Movies
You can control your camera from EU and shoot movies from your
computer screen. Note that you cannot shoot movies without a memory
card in your camera.
1D X Mk II
5DS/5DS R
5D Mk IV 5D Mk III
R
RP
When setting the movie recording size, click [Live View/Movie
func. set.], and display the [Live View/Movie func. set.] window
before setting.
Contents
6D Mk II
6D
7D Mk II
90D
80D
77D
760D
800D
200D
750D
2000D
1300D
4000D
M6 Mk II
M50
250D
1
2
3
4
Downloading
Images
1 Prepare for Live View shooting.
Camera
Settings
O Follow the procedure of step 1 to step 2 for “Remote Live View
Shooting” (p.37).
6D
O On 1D X Mk II 5DS/5DS R 5D Mk IV 5D Mk III 6D Mk II
,
set
your
camera’s
Live
View
shooting/Movie
7D Mk II
80D
shooting switch to <
>.
2 Click the [
Introduction
Remote
Shooting
] button.
Preferences
O Displayed contents may differ depending on the connected camera.
5DS/5DS R
¿ The [Remote Live View window] appears.
O On 1D X Mk II 5DS/5DS R 5D Mk IV 5D Mk III
R
RP
6D Mk II
6D
7D Mk II
90D
80D
77D
760D
800D
250D
200D
750D
M6 Mk II
M50
, specify
1D X Mk II 5D Mk IV 7D Mk II
80D
5D Mk III
R
RP
6D Mk II
6D
90D
77D
760D
800D
250D
200D
750D
M6 Mk II
M50
Reference
Index
audio recording settings as needed.
For specifying audio recording settings, see “Audio Recording
Setting” (p.55).
O You cannot operate the camera when the [
] button is
clicked. To operate the camera, click the [
] button again or
close the [Remote Live View window].
O You cannot shoot movies using Remote Live View function when
EU is wirelessly connected to 6D(WG) 6D(W) .
Select
Select
Click
Click
67
Introduction
2000D
1300D
4000D
• IPB (Light)/Light (IPB)/Light 1D X Mk II 5D Mk IV
R
RP
6D Mk II
7D Mk II
90D
80D
77D
760D
800D
250D
200D
750D :
M6 Mk II
Select
Selectable when the movie recording format is
set to [MP4]. The movie is recorded at bit rate
lower than with IPB (Standard) resulting in a
smaller file size and compatibility with a larger
range of playback systems. Of the three
methods available, this method allows the
longest total possible movie shooting time on
a card of a given capacity.
Click
O Selectable movie recording sizes differ depending on the camera.
O The following movie compression formats can be selected on
1D X Mk II
5DS/5DS R
5D Mk IV 5D Mk III
6D
7D Mk II
90D
80D
77D
250D
200D
750D
M6 Mk II
M50
R
RP
760D
6D Mk II
800D
.
• ALL-I (I-only)/ALL-I (For editing)/Editing (ALL-I) 1D X Mk II
5DS/5DS R
80D
:
5D Mk IV 5D Mk III
R
6D
7D Mk II
Compresses one frame at a time for recording.
Although the file size will be larger than with
IPB, the movie will be more suited for editing.
• IPB/IPB (Standard)/Standard (IPB)/Standard:
Compresses multiple frames at a time efficiently
for recording. Since the file size will be smaller
than with ALL-I, you can shoot longer.
O 1D X Mk II 5D Mk IV
• MJPG/Motion JPEG: Motion JPEG is used to compress the
movie for recording. Without any
compression between frames, each frame
is compressed at a time and recorded.
The compression rate is therefore low.
Also, since the image size is large with 4K
quality, the file size will be large.
80D , you can select the
O On 1D X Mk II 5D Mk IV 7D Mk II
movie’s recording format.
• MOV: The movie is recorded in the MOV format (file extension:
“.MOV”). Convenient for editing with a computer.
• MP4: The movie is recorded in the MP4 format (file extension:
“.MP4”). This format is compatible with a much larger
range of playback systems than the MOV format.
760D
77D
800D
250D
200D ,
O On 80D
the following operations are unavailable when movie digital zoom
is set on the camera.
• Remote Live View display
• Focusing with AF
• Still photo shooting
80D
77D
800D
250D
200D Power
• 90D
zoom operation
6D
90D
80D
O Video Snapshot shooting on 6D Mk II
77D
M50
760D
800D
250D
is not available with EU.
200D
750D
M6 Mk II
Contents
1
2
3
4
Downloading
Images
Camera
Settings
Remote
Shooting
Preferences
Reference
Index
68
Introduction
3 Adjust the focus
4 Click the [
(p.46, p.48).
Contents
] button and begin shooting.
¿ At the bottom left of the [Remote Live View window], a [
and the recording time are displayed.
] icon
Recording time
O Click the [
] button again to end shooting.
¿ When the [Remote Live View window] closes, the following
window appears if some movie files remain to be downloaded to
your computer.
1
2
3
4
Downloading
Images
Camera
Settings
Remote
Shooting
Preferences
O After you click the [Download] button, the file names of the movie
files appear in a list.
R
O When the
is connected and Canon Log gamma (8bit) is
set on the camera, the Canon Log gamma setting icon and
[
] (View Assist) button are displayed in the Remote Live
View window (p.101, p.102).
Canon Log gamma is a movie characteristic to attain wide
dynamic range. As a result, the image displayed in the Remote
Live View window has low contrast and is somewhat dark
compared to when a Picture Style is set.
If you click the [
] (View Assist) button, the movie image will
be displayed in the Remote Live View window with a conspicuous
characteristic. This makes it easier to check the angle of view,
details, etc.
Note that even if you click the [
] (View Assist) button, it will
not affect the movie recorded to the card. (The movie will be
recorded to the card with Canon Log gamma.)
Reference
Index
69
Introduction
1D X
1D C
1 Prepare for Live View shooting.
O Follow the procedure from step 1 to step 2 for “Remote Live View
Shooting” (p.37).
2 Click [Live View/Movie func. set.].
Contents
1
2
3
4
Downloading
Images
Camera
Settings
Remote
Shooting
Preferences
After specifying [Destination Folder] and [File Name], click the
[Download] button in the window, and movie files will be
downloaded from the camera’s memory card to your computer.
Movie files having a check mark removed from its file name
are not downloaded. When downloading movie files to your
computer afterwards from the camera’s memory card, use the
method described on p.11 to p.15 of this Instruction Manual to
download.
¿ The [Live View/Movie func. set.] window appears.
[Movies] for [LV func. setting], and select the
3 Select
movie recording size from the list box.
Reference
Index
70
Introduction
O The following movie compression formats can be selected on
1D X
1D C .
• ALL-I (I-only): Compresses one frame at a time for recording.
Although the file size will be larger than with IPB,
the movie will be more suited for editing.
• IPB:
Compresses multiple frames at a time efficiently
for recording. Since the file size will be smaller
than with ALL-I, you can shoot longer.
O
4 Click the [OK] button.
5 Click [Live View shoot.].
¿ The [Live View/Movie func. set.] window closes.
Contents
1D C
When shooting a movie at 4K (4096 x 2160
pixels), Motion JPEG is used to compress the
movie recorded.
Each frame is compressed separately and
recorded without compression between frames.
The compression rate is therefore low. Since the
image size is large, the file size will also be large.
O When the 1D C is connected and Canon Log gamma is set
on the camera, the Canon Log gamma setting icon and [
]
(View Assist) button are displayed in the Remote Live View
window (p.101, p.102).
Canon Log gamma is a movie characteristic to attain wide
dynamic range. As a result, the image displayed in the Remote
Live View window has low contrast and is somewhat dark
compared to when a Picture Style is set.
If you click the [
] (View Assist) button, the movie image will
be displayed in the Remote Live View window with a
conspicuous characteristic. This makes it easier to check the
angle of view, details, etc.
Note that even if you click the [
] (View Assist) button, it will
not affect the movie recorded to the card. (The movie will be
recorded to the card with Canon Log gamma.)
1
2
3
4
Downloading
Images
Camera
Settings
• MJPG:
¿ The [Remote Live View window] appears.
1D C , specify audio recording settings as
O On 1D X
needed.
For specifying audio recording settings, see “Audio Recording
Setting” (p.55).
6 Adjust the focus
7 Click the [
(p.46, p.48).
Preferences
] button and begin shooting.
¿ At the bottom left of the [Remote Live View window], a [
and the recording time are displayed.
Remote
Shooting
] icon
Recording time
Reference
Index
O Click the [
] button again to end shooting.
¿ When the [Remote Live View window] closes, the following
window appears if some movie files remain to be downloaded
to your computer.
71
O After you click the [Download] button, the file names of the movie
files appear in a list.
Introduction
Contents
1
2
3
4
Downloading
Images
Camera
Settings
Remote
Shooting
Preferences
Reference
After specifying [Destination Folder] and [File Name], click the
[Download] button in the window, and movie files will be
downloaded from the camera’s memory card to your computer.
Movie files having a check mark removed from its file name are
not downloaded. When downloading movie files to your
computer afterwards from the camera’s memory card, use the
method described on p.11 to p.15 of this Instruction Manual to
download.
Index
72
Timer-controlled Shooting
Two types of timer shooting are available where the camera
automatically takes shots at a specified time or a specified number.
Timer Shooting
Introduction
Remote Interval Timer Shooting
You can automatically take shots by setting the interval between shots
and the number of shots to be taken.
EOS cameras other than 5D Mk IV
You can automatically take a shot when the specified time elapses.
Display the capture window (p.38).
1
2 Click the [ ] button.
3 Enter a delay time and click the [Start] button.
¿ The [Timer shooting settings] dialog box appears.
O Enter a value between 0 seconds and 99 minutes 59 seconds in
one-second increments.
¿ The shot is taken when the specified time elapses.
RP
6D Mk II
Display the capture window (p.38).
1
2 Click the [ ] button.
3 Checkmark [Remote Interval timer shooting].
4 Enter the shooting interval and the number of shots.
¿ The [Timer shooting settings] dialog box appears.
O Enter a value between 5 seconds and 99 minutes 59 seconds in
one-second increments.
O The minimum number of interval shots is two. The number of
shots you can take at intervals depends on the available space
on your computer’s hard disk.
5
Click the [Start] button.
¿ The shots are taken at the specified intervals and for the
specified number of shots.
Contents
1
2
3
4
Downloading
Images
Camera
Settings
Remote
Shooting
Preferences
Reference
Index
On certain types of computer, if you set a short interval between
shots and there is insufficient time to transfer and save the images,
it may not be possible to take shots at the specified interval. In this
case, set a longer interval between shots and take the shots again.
The shooting mode cannot be changed when the [Timer shooting
settings] dialog box is displayed.
Display the [Timer shooting settings] dialog box after setting the
shooting mode.
73
5D Mk IV
RP
6D Mk II
1 Display the capture window
2 Click the [ ] button.
3 Select the mode.
(p.38).
¿ The [Interval timer shooting] dialog box appears.
O Select from the following 2 modes.
[Camera function] mode:
This mode uses the camera’s interval timer shooting function.
You can perform shooting at precise intervals. Shooting at short
intervals is also supported. You can also operate the camera
during interval timer shooting.
[Computer control] mode:
Performs interval timer shooting using computer.
Bulb shooting is also supported.
O Click the [Camera function] or [Computer control] button.
¿ Either settings dialog box appears.
4 Specify settings.
O [Camera function] mode:
Enter the shooting interval and the number of shots.
• Enter a shooting interval between 1 second and 99 hours 59
minutes 59 seconds in one-second increments.
• Enter the number of shots between 01 and 99. If set to 00,
there is no limit on the number of shots and shooting continues
until the interval timer stops.
O [Computer control] mode:
Specify settings by the following steps.
1) Checkmark [Remote interval timer shooting].
2) Enter the shooting interval and the number of shots.
• Enter a shooting interval between 5 seconds and 99 minutes
59 seconds in one-second increments.
• The minimum number of shots is two. The number of shots
you can set depends on the available space on your
computer’s hard disk.
5 Click the [Start] button.
¿ The shots are taken at the specified intervals and for the
specified number of shots.
Introduction
Contents
1
2
3
4
Downloading
Images
Camera
Settings
Remote
Shooting
Preferences
O In [Computer control] mode, on certain types of computer, if you
set a short interval between shots and there is insufficient time to
transfer and save the images, it may not be possible to take shots
at the specified interval. In such a case, set a longer interval
between shots and take the shots again.
O For cautions for using [Camera function] mode, refer to the
description regarding interval timer shooting in the camera’s
Instruction Manual.
O The shooting mode cannot be changed when the [Timer shooting
settings] dialog box is displayed.
Set the shooting mode before displaying the [Timer shooting
settings].
O To end interval timer shooting while in progress:
In [Camera function] mode, click the [Stop] button in the [Interval
timer] dialog box.
In [Computer control] mode, click the [Cancel] button in the [Timer
shooting settings] dialog box.
Reference
Index
74
Remote Bulb Shooting
Remote Bulb Shooting
1 Display the capture window .
2 Click the shooting mode icon and select [BULB].
3
Set the desired aperture.
(p.38)
Introduction
Contents
1
2
3
4
Downloading
Images
Camera
Settings
Remote
Shooting
Preferences
4 Click the [ ] button.
5 Enter the exposure time and click the [Start] button.
¿ The [Timer shooting settings] dialog box appears.
O Specify the following settings for cameras other than
1D X Mk II
1D X
1D C
R
.
• For cameras with < B > (bulb) on the Mode dial, set to < B >.
• For cameras without < B > (bulb) on the Mode dial, set the
Mode dial to < M > (manual), and select [BULB] in the capture
window or set the camera’s shutter speed to [BULB].
Reference
O Enter a value between 5 seconds and 99 minutes 59 seconds in
one-second increments.
Index
You can start/end remote bulb shooting without setting an exposure
time by clicking the [
] button.
75
3
Setting the Bulb Timer
5DS/5DS R
80D
5D Mk IV
77D
R
RP
6D Mk II
7D Mk II
90D
M6 Mk II
Specify settings.
O Select [Enable].
O Set the exposure time. Time can be set in a range from 00:00:00
to 99:59:59.
You can preset the bulb exposure’s exposure time. With the bulb timer,
you do not need to hold down the shutter button during the bulb
exposure. This reduces camera shake. The bulb timer can be set only in
the <B> (Bulb) shooting mode. It cannot be set in any other shooting
mode.
1
Contents
1
2
3
4
Downloading
Images
Camera
Settings
Prepare for Live View shooting.
O Follow the procedure of step 1 and step 2 for “Remote Live View
Shooting” (p.37).
2 Select [Bulb timer settings] in the [Shooting menu].
Introduction
O If you select [Disable], the bulb timer will be OFF for the next
bulb shooting.
O If 00:00:00 is set for the exposure time, the bulb timer is set to
[Disable].
4 Click the [OK] button.
Remote
Shooting
Preferences
Reference
Index
¿ The [Bulb timer settings] window appears.
¿ The bulb timer is set on the camera, and the [Bulb timer settings]
window closes.
76
Flash Shooting
From EU, you can set the camera’s flash functions, as well as EX-series
Speedlite (sold separately) compatible with flash function setting, in
order to perform flash shooting.
For more details on setting items, also refer to the Instruction Manuals
provided with your EX-series Speedlite and with your camera.
4
Click the [
] button.
Introduction
Contents
1 Prepare your camera and flash.
your camera and computer, and then start
2 Connect
up EU
.
3 Click [Remote shooting].
1
2
3
4
Downloading
Images
O When using an external flash, attach it on your camera.
Camera
Settings
(p.7)
Remote
Shooting
Preferences
Reference
Index
¿ The capture window appears.
¿ The [Flash control menu] appears.
77
Introduction
5 Click [Flash function settings].
Flash control menu
Contents
1
2
3
4
Downloading
Images
¿ The [Flash function settings] window appears.
O Displayed contents may differ depending on the connected camera.
O Select [Raise built-in flash] to use the built-in flash on 7D Mk II
1300D .
Camera
Settings
80D
77D
760D
800D
200D
750D
2000D
760D
800D
750D , select [EasyWireless] or
O To enable the wireless function for the built-in flash on 77D
[CustWireless] in [Built-in flash] on the [Flash control menu]. To disable the wireless function, select [NormalFiring].
6 Specify settings.
Remote
Shooting
Preferences
Flash function settings window
The window displayed differs depending on the connected camera and flash.
Reference
Check that this box is checkmarked
Click setting items, and select settings from the menu that appears*
Index
[Wireless func.] button
Enable the wireless function, click the setting items, and then select settings from
the menu that appears*
* You can also use the scroll-wheel on your mouse to select settings for items in the
settings window that appears.
78
Introduction
7 Click the [
] button to shoot.
Contents
1
2
3
4
Downloading
Images
If the [Flash control] menu is displayed on the camera’s LCD
monitor, EU’s [Flash function settings] window automatically
closes.
O You can use modeling flash by clicking the [Modeling flash]
button. You should only use modeling flash for a maximum of 10
times continuously. (For more information, refer to the Instruction
Manual provided with the flash.)
O Information displayed in the [Flash function settings] window is
updated by clicking the [
] button, so it is synchronized with
the current flash settings. (Since setting changes made with the
flash unit are not reflected in the [Flash function settings]
window, you can click the [
] button and update the [Flash
function settings] window to match the current flash settings.)
O You can name and save the flash setting as a file separate from
the image by clicking the [Save] button. You can also click the
[Load] button and load this file into EU to use it for other
shooting.
O You can use flash shooting and Remote Live View shooting
(p.37) together.
However, you cannot use modeling flash during Remote Live
View shooting.
O Settings that can be performed in the [Flash function settings]
window differ depending on the flash and camera.
¿ The shot image is transferred to your computer and displayed in
the [Quick Preview] window. Then, DPP starts up automatically.
O When the AF/MF switch button on the capture window is set to
[AF] and the cursor is moved to the [
] button, AF/AE is
executed (p.98).
O You can quickly review the shot image in the [Quick Preview]
window displayed before DPP starts up. You can also resize the
[Quick Preview] window.
O You can show/hide the [Quick Preview] window by clicking the
[Other Functions] button in the capture widow and selecting
[Quick Preview] from the menu that appears.
Camera
Settings
Remote
Shooting
Preferences
Reference
Index
O For a list of [Flash function settings] window functions, see
p.100.
O You can also shoot using the <space> bar on the keyboard.
79
Editing Picture Styles Using Remote Live View Function
1D X Mk II
1D C
5D Mk IV 7D Mk II
You can start up Picture Style Editor (software for creating Picture Style
files) (hereinafter PSE) from EU and link with EU’s Remote Live View
function. By linking PSE with EU’s Remote Live View function, you can
edit a Picture Style while viewing the editing results in real time, and
adjust the image quality more efficiently while editing. Versions of PSE
compatible with this function are version 1.16.20 and later.
5
Select and enter required items, and then click the
[Register] button.
O After selecting [User Def.], enter information in [Caption] and
[Copyright].
(Entry in [Caption] is essential.)
¿ The edited Picture Style is registered to the camera when you
click the [Register] button.
the procedure from step 1 to step 3 for
1 Follow
“Remote Live View Shooting”
.
2 Click [Other Functions] and then [Edit Picture Style].
(p.37)
Introduction
Contents
1
2
3
4
Downloading
Images
Camera
Settings
¿ PSE starts up and the [Edit Picture Style] window (Remote Live
View window for editing Picture Styles) appears.
Remote
Shooting
3 Edit a Picture Style using PSE.
O For details on editing Picture Styles using PSE, refer to the
“Picture Style Editor Instruction Manual” (PDF electronic
manual).
You cannot click the [
] button in PSE to specify colors you
want to adjust on a Remote Live View image in EU.
¿ The results of editing a Picture Style using PSE are shown in real
time in the [Edit Picture Style] window. This allows you to edit a
Picture Style while viewing the results.
O While using this function, EU’s capture window and all camera
functions are not available.
Preferences
Reference
Index
After editing is completed, it is recommended that you save the
edits to your computer as a Picture Style file before going on to
step 4. Picture Styles registered to the camera cannot be extracted
and saved to your computer as Picture Style files. For details on
saving Picture Style files, refer to the “Picture Style Editor
Instruction Manual” (PDF electronic manual).
the [Register] button in the [Edit Picture Style]
4 Click
window.
¿ The [Register Picture Style] dialog box appears.
When you finish this function and then start it up again, the
message [Continue editing from last time?] appears. You can
select [Yes] to continue editing the last Picture Style.
80
Registering Background Music to a Camera Memory Card
RP
6D Mk II
6D
90D
80D
77D
760D
800D
250D
200D
750D
2000D
1300D
4000D
Introduction
Register Background Music window
M6 Mk II
Contents
You can register WAV-format music files, saved to your computer, to the
camera’s memory card as background music. Registered background
music can be played together with a Video Snapshot Album or
slideshow played on the camera.
Downloading
Images
your camera and computer. Start up EU and
1 Connect
click [Camera settings].
Camera
Settings
¿ The [Camera settings] window appears.
2
Click [Register Background Music].
3 Edit [List of background music to register].
Adding New Music Files
O Click the [Add] button, select a music file in the [Open] dialog box
that appears, and then click the [Open] button.
1
2
3
4
Remote
Shooting
Preferences
Reference
Index
¿ The [Register Background Music] window appears.
O When the [EOS Sample Music] folder is installed to your
computer, the sample track appears in [Background music to
register] the first time as EOS Sample Music.
O When the camera is in movie shooting mode, registering
background music is not possible.
¿ A music file is added to [List of background music to register].
O You can also directly drag and drop a music file saved anywhere
in your computer to add it to [List of background music to
register].
O Music can be added only one track at a time.
O A total of 20 tracks can be added, each up to 29 minutes
59 seconds long.
81
Changing the Playback Order of Music Files
O Select a music file in [List of background music to register], and
then click the [
] or [
] button.
Editing Track Names of Music Files
O Select a music file in [List of background music to register], click
the [Edit Track Name] button and enter a track name up to 25
characters (single-byte). Then, click the [OK] button.
Introduction
Contents
1
2
3
4
Downloading
Images
Camera
Settings
¿ The order of the music files changes.
O You can also directly drag and drop music files within the [List of
background music to register] to change the order.
Deleting Music Files
O Select a music file in [List of background music to register], and
then click the [Remove] button.
Remote
Shooting
¿ The track name for the music file changes.
O You can also display the [Edit Track Name] dialog box by
double-clicking a music file in the [List of background music to
register].
Playing Music Files
O Select a music file in [List of background music to register], and
then click the [Play] button.
Preferences
Reference
Index
¿ The music file is deleted from [List of background music to
register].
¿ The music file plays.
82
Adding EOS Sample Music
O Click the [EOS Sample Music] button.
5
Click the [Close] button.
Introduction
Contents
¿ The [Register Background Music] window closes.
¿ The EOS Sample Music on your computer is added to [List of
background music to register].
O This operation cannot be performed if EOS Sample Music is not
installed on your computer.
1
2
3
4
Downloading
Images
Camera
Settings
4 Click the [Register] button.
Remote
Shooting
Preferences
Reference
¿ The music files in [List of background music to register] are
registered (copied) to the camera’s memory card.
O Music files already registered on the camera’s memory card are
overwritten as music files are registered.
O Registering music files to your camera one track at a time is not
possible.
Music copied with this function may not be used without permission
from the copyright holder, except for cases permitted under
applicable laws, such as for personal use.
Index
Music files meeting the following requirements may be registered to
the camera’s memory card.
File format
Music file export: WAVE (.wav, .wave)
files in linear PCM
File time limit
Up to 29 min. 59 sec. per one file
File number limit
Up to 20 files
Channels
2 channels
83
Setting Web Services
5D Mk IV(WG) 6D Mk II
800D
200D
6D(WG)
750D(W)
6D(W)
2000D
Introduction
80D(W)
1300D(W)
77D
760D(W)
4000D
How to register Web services to the camera is explained here.
You can use CANON iMAGE GATEWAY to show shot images in online
photo albums and use a variety of services. CANON iMAGE GATEWAY
is also a site that serves as a bridge for sending images wirelessly from
your camera to other Web services such as Facebook, Twitter, YouTube,
Flickr, and email.
Before registering Web services to your camera, connect to the Internet
with your computer, access the CANON iMAGE GATEWAY website for
your area from Canon website (www.canon.com/cig), and follow
on-screen instructions to register as a member.
To use Web services in addition to CANON iMAGE GATEWAY, continue
by registering applicable accounts. For detailed information, refer to the
website for each Web service.
O A computer is required for specifying settings for Web services,
including CANON iMAGE GATEWAY.
O For information on countries and areas supporting CANON iMAGE
GATEWAY services, refer to Canon website (www.canon.com/cig).
O For how to specify Web service settings with 90D M6 Mk II
M6
M5
RP
M50
M3
M10
M100
250D
your camera and computer. Start up EU and
1 Connect
click [Camera settings].
¿ The [Camera settings] window appears.
O If your camera and computer are not connected, [Web Service
Settings] is not displayed.
2 Click [Web Service Settings].
1
2
3
4
Downloading
Images
Camera
Settings
Remote
Shooting
Preferences
R
, refer to your camera’s Instruction Manual.
Contents
Reference
¿ The CANON iMAGE GATEWAY login dialog box appears.
Index
O To use this function, the EOS Web Service Registration Tool must
be installed.
O To use CANON iMAGE GATEWAY, an environment enabling
Internet access (subscription with a provider as well as installed
browser software and an in-place line connection) is required.
O For version and settings information on a browser (Microsoft
Internet Explorer, etc.) for accessing CANON iMAGE GATEWAY,
check with “CANON iMAGE GATEWAY”.
O Provider connection fees and transmission fees to provider
access points are incurred separately.
84
3
Log in to CANON iMAGE GATEWAY.
5
Apply Web service settings to the camera.
O Select the names of the Web services you want to set in the
[Web Services] list, and click the [
] button at the center.
¿ Names of Web services to be applied to the camera appear in
the [Camera] list.
O You can also change the order in which Web services are
displayed in the camera’s menu by clicking the [
] or [
]
button in the [Camera] list.
O To cancel the changes you made to the [Camera] list, click the
[Cancel] button.
O Once the [Camera] list contains all the Web services you want to
set, click the [OK] button to complete.
¿ Web service settings are applied to the camera.
O Enter your login name and password for CANON iMAGE
GATEWAY, and then click the [Login] button.
¿ The [Edit Web Services] window appears.
Introduction
Contents
1
2
3
4
Downloading
Images
Camera
Settings
Remote
Shooting
Preferences
4 Set Web services to use.
O Follow on-screen instructions to set the Web services to use.
O When setting of the Web services is completed, click the [Finish]
button at the bottom to close the [Edit Web Services] window.
¿ The [Web Service Settings] dialog box appears.
Reference
Index
O When the destination is email, you can register up to 20
addresses to the camera.
O When logging in to CANON iMAGE GATEWAY from the second
time onward in step 3, the [Web Service Settings] dialog box in
step 5 appears. To set Web services to use, click the [Edit Web
Services] button.
O To add or change Web services, repeat the operation from step 1.
85
Registering IPTC Information
1D X Mk II (firmware version 1.1.0 or later) 5D Mk IV
R
If this function for adding IPTC* information is equipped with the
camera, you can edit and register IPTC* information. IPTC information
registered on the camera can be added to shot images.
IPTC information is comment information, such as captions, credits, and
shooting location.
* International Press Telecommunications Council
3
Edit and register information as needed.
Contents
Camera
Settings
¿ The Camera settings window appears.
O If your camera and computer are not connected, the [Register
IPTC information] option is not displayed.
¿ The [Register IPTC information] dialog box appears.
1
2
3
4
Downloading
Images
your camera and computer. Start up EU and
1 Connect
click [Camera settings].
2 Click [Register IPTC information].
Introduction
Remote
Shooting
O [Register IPTC information] is displayed with current camera
settings entered.
Even if IPTC information is not set, [Author] and [Copyright]
information are displayed if they are registered in the camera.
O Clicking the [Apply to camera] button sets the IPTC information
to the camera and then also sets the camera’s Custom Function
[Add IPTC information] option to [ON] and closes the [Register
IPTC information] dialog box.
O Clicking the [Delete from camera] button deletes all IPTC
information registered in the camera and then also sets the
camera’s Custom Function [Add IPTC information] option to
[OFF] and closes the [Register IPTC information] dialog box.
After clicking the [Delete from camera] button, IPTC information
is not added to shot images.
O You can click the [Save] button to save information displayed in
the current [Register IPTC information] dialog box as an XMP
file.
O You can click the [Load] button to load IPTC information saved to
a file using this function.
Preferences
Reference
Index
86
4
Preferences
Introduction
You can change each of the EU functions on each window of the
preferences window to make them easier to use.
Preferences ............................................................. 88
Basic Settings............................................................. 88
Destination Folder ...................................................... 88
File Name ................................................................... 89
Remote Shooting........................................................ 89
Linked Software.......................................................... 90
Time Settings.............................................................. 90
Survey ........................................................................ 91
Contents
1
2
3
4
Downloading
Images
Camera
Settings
Remote
Shooting
Preferences
Reference
Index
87
Preferences
1 On the main window, click the [Preferences] button.
the required settings and click the [OK]
2 Specify
button.
¿ The [Preferences] dialog box appears.
Introduction
Destination Folder
You can specify the save destination folder of images downloaded from
your camera or of images shot remotely.
¿ The settings are applied to EU.
Contents
1
2
3
4
Downloading
Images
Basic Settings
You can specify the operation when EU starts up.
Camera
Settings
Remote
Shooting
Preferences
Reference
O When [Show [Select and download] screen] is selected in
[Startup Action], the viewer window (p.96) appears.
O When [Show [Remote shooting] screen] is selected in [Startup Action],
the capture window (p.98) appears. (With
M6
M5
M3
M10
M100 , the main window appears.)
O When [Execute [Start automatic download]] is selected in
[Startup Action], the [Save File] dialog box (p.11) appears and
downloading to your computer begins. When all the images have
been downloaded, DPP starts up automatically and the
downloaded images are displayed in DPP’s main window.
O If you remove the check mark from [Automatically display Quick
Preview window], the [Quick Preview] window will no longer
appear during Remote Live View shooting or when loading
images.
O You can also specify a save destination folder by entering text
directly in the textbox for the save destination folder.
O To specify a save destination folder, click the [Browse] button.
After you click the [Browse] button and specify a save destination
folder, a subfolder is created automatically below the save
destination folder you specified.
O After you checkmark [Create a subfolder in this folder and save
images], a subfolder is created.
O You can select the naming rule for a generated subfolder from
the list box. You can also customize the naming rule for
subfolders by clicking the [Customize] button.
O If you are using the shooting date for a generated subfolder, you
can specify the format (order and style for year-month-date) and
dividing characters.
Index
88
Introduction
File Name
You can specify the file name of images downloaded from your camera
or of images shot remotely.
Remote Shooting
You can set operations performed during remote shooting. This function
cannot be used with
M10
M100 .
M6
M5
M3
Contents
1
2
3
4
Downloading
Images
Camera
Settings
Remote
Shooting
Preferences
 When specifying an image’s file name, select a naming rule for
the file from the list box. (If [Do not modify] is selected, images
are saved with the file name set in the camera.) You can also
customize the naming rule for files by clicking the [Customize]
button.
 You can set prefix characters, number of digits for serial
numbers, and the start number individually for file names.
 If you are using the shooting date in file names, you can specify
the format (order and style for year-month-date) and dividing
characters.
 If you checkmark [Rotate image], you can set a function that
rotates shot images regardless of the camera’s position during
shooting. Set the rotation angle in the capture window (p.98).
 If you checkmark [Start Live View], the [Remote Live View
window] automatically appears when the camera’s Live View
starts up (except
R
RP
M6 Mk II
M50 ).
 Is you checkmark [Stop Live View], the [Remote Live View
window] automatically closes when the camera’s Live View ends.
If the camera’s Live View display is active when Remote Live
View ends, the camera’s Live View display also ends
(except
R
RP
M6 Mk II
M50 ).
 If you checkmark [Turn on camera’s LCD monitor when Live View
starts], the camera’s LCD monitor displays the image at the same time
as Remote Live View starts (except
R
RP
M6 Mk II
M50 ).
 If you checkmark [Change settings using mouse wheel on
[Remote Shooting] screen], you can use the scroll-wheel on your
mouse to change settings over the capture window display/
control buttons or the [Flash function settings] window.
Reference
Index
89
Introduction
Linked Software
From the list box, you can select the linked software that starts up when
images are downloaded from the camera or when images are shot
remotely. Also, you can register third-party software as linked software
by clicking the [Register] button.
Time Settings
You can specify settings for clock time when connected to a camera.
Contents
1
2
3
4
Downloading
Images
Camera
Settings
Remote
Shooting
Preferences
Reference
Index
In the window displayed when you click the [Register] button, you
can specify the type of images to be posted when linked third-party
software is started up.
O When you select [Notify me if the time does not match], you can
set the number of minutes, from 1 to 60 minutes, for which the
camera clock and computer clock are out of sync before you are
notified.
When you start up EU, the camera clock and computer clock are
compared. If the time difference exceeds the set number of
minutes, a notification dialog box is displayed.
O When you select [Always match the computer time], the camera
is set to the computer’s time when you start up EU.
90
Introduction
Survey
You can change survey send settings.
Contents
1
2
3
4
Downloading
Images
Camera
Settings
Remote
Shooting
O Click the [Change settings] button and change settings in the
dialog box that appears.
Preferences
Reference
Index
91
Reference
Introduction
This reference section is intended to enhance your experience using EU.
An index is provided at the end of the chapter for you to easily find
information you are looking for.
Troubleshooting.......................................................
Uninstalling the Software.........................................
List of Viewer Window Functions.............................
List of Register Data Window Functions for Lens
Data/Lens Aberration Correction .............................
List of Capture Window Functions...........................
93
95
96
97
98
Exposure Level/AEB Level ..................................... 99
List of Flash Function Settings Window
Functions................................................................ 100
List of Remote Live View Window (Live View Tab)
Functions ............................................................... 101
List of Remote Live View Window (Compose Tab)
Functions ............................................................... 102
List of Zoom View Window Functions.................... 103
Index...................................................................... 104
About This Instruction Manual .............................. 105
Trademarks .......................................................... 105
Contents
1
2
3
4
Downloading
Images
Camera
Settings
Remote
Shooting
Preferences
Reference
Index
92
Troubleshooting
Introduction
If EU is not operating correctly, see the items below.
EU and the camera are not communicating
Installation could not be completed correctly
O You cannot install software unless you are logged into an account
with Administrator privileges. Log in again into an account with
Administrator privileges. For how to log in and how to specify
Administrator settings, refer to the User’s Manual for the Macintosh
computer or for Mac OS X.
EU does not start up
O When
6D(W)
6D(WG)
760D(W)
750D(W)
2000D
1300D(W)
4000D
is connected to a
computer with an interface cable and the camera’s Wi-Fi setting is
enabled, EU cannot start up. Disable the Wi-Fi setting and re-connect
the camera and the computer.
M6
M5
M3
M10
M100
The card reader does not detect the SD card
O Depending on the card reader and computer OS used, SDXC cards
might not be correctly detected. In such a case, connect your camera
and computer with an interface cable, and transfer the images to your
computer.
O EU does not operate correctly on a computer if its system
requirements are not met. Use EU on a computer with compatible
system requirements (p.2).
O Push the plug of the interface cable all the way into the socket. Loose
connections can cause faults and malfunctions (p.7).
O Check that the camera’s power is turned on (p.9).
O EU and the camera may not communicate normally with a cable other
than the EOS camera-dedicated Canon interface cable (p.7).
O Connect your camera and computer directly with an interface cable.
Do not connect the camera via a hub; doing so may prevent EU and
your camera from communicating normally.
O If you connect multiple USB devices (not including the mouse or
keyboard) to your computer, the camera may not communicate
normally. If the camera cannot communicate normally, disconnect
USB devices other than the mouse or keyboard from your computer.
O Do not connect more than one camera to the same computer. Two or
more cameras may not operate normally.
O Do not connect your camera with the computer while performing
“Linked shooting” with a WFT series Wireless File Transmitter (sold
separately). Your camera may not operate normally.
O If there is insufficient charge left in the camera battery, the camera
cannot communicate with EU. Replace with a fully charged battery.
Your camera may be able to use a household power outlet by using
accessories (sold separately). For details, refer to the Instruction
Manual provided with your camera. Your computer does not supply
power to the camera through an interface cable.
Contents
1
2
3
4
Downloading
Images
Camera
Settings
Remote
Shooting
Preferences
Reference
Index
93
Introduction
Communication between EU and the camera
disconnected
O If you do not perform any operation while the camera and computer
are connected, depending on the computer system, a confirmation
message may appear on the screen asking whether you wish to
continue communicating with the camera. If you do not perform an
operation while this message appears, communication with your
camera is discontinued and EU shuts down. In this case, turn the
camera’s power switch to < OFF >, then again to < ON > and start up
EU.
O Do not put your computer to sleep mode while it is connected to the
camera. If your computer goes into sleep mode, never disconnect the
interface cable while your computer is still in sleep mode. Always
wake your computer up while it is still connected to the camera.
Depending on the type of computer, disconnecting the interface cable
while your computer is in sleep mode could prevent the computer
from waking up correctly. Refer to the computer User’s Manual for
more information on sleep mode.
A non-Canon flash does not fire during
Remote Live View shooting
O When a non-Canon flash is mounted on the camera for Remote Live
View shooting, set [Silent LV shoot.] in the camera to [Disable].
Contents
1
2
3
4
Downloading
Images
Camera
Settings
Remote
Shooting
Preferences
Reference
Index
94
Uninstalling the Software
O Click the [ ] icon on the menu bar of the desktop and select [Quit].
O Before starting the software uninstallation, quit all programs you are
using.
O To uninstall the software, log into the account used when installation
was performed.
O When you have moved the folders and the software to be deleted to
the Trash, select the [Finder] menu  [Empty Trash] and empty the
Trash. You cannot reinstall the software until you have emptied the
Trash.
Display the folder in which the software is saved.
1
2 Drag the following folder and software to the trash.
O Open the [Canon Utilities] folder.
• [EOS Utility] folder
• EOS Lens Registration Tool
• EOS Web Service Registration Tool
3
Select the [Finder] menu on the desktop  [Empty
Trash].
¿ EU is uninstalled.
4 Restart your computer.
You cannot retrieve data that you have emptied into the Trash and
deleted, so be particularly careful when deleting data.
Introduction
Contents
1
2
3
4
Downloading
Images
Camera
Settings
Remote
Shooting
Preferences
Reference
Index
95
List of Viewer Window Functions
List view
Switches the recording media
Thumbnail view
(p.13)
Introduction
*2
Information display
Protect icon
Changes the thumbnail order Selects the condition of the image
Date filter
Invert selection
Show only selected
images
Recording media
folder hierarchy
Audio recording icon
RAW + JPEG
image icon
Rating icon
*1
Images already
transferred to computer
icon
Bracketing icon
Focus bracketing mark
Contents
1
2
3
4
Downloading
Images
Camera
Settings
Remote
Shooting
Preferences
Check mark (p.13)
RAW image icon
Movie
Dual Pixel RAW image
icon
Recording time
Reference
Index
Image display size
Quits EU
Deletes the
image
Downloads the images to the computer
Information display*2
*1 Ratings set on the camera, or Digital Photo Professional Ver. 3.9 or later
are displayed.
However, the [Reject] rating is not displayed. Also, ratings cannot be
set with EU.
Displays the main window
Displays the [Preferences] window
*2 You can select and display the following information.
[Date/time]
[Shooting information]
[Size]
Selecting [Date/time] displays the date and time when the file was
created.
96
List of Register Data Window Functions for Lens Data/Lens Aberration Correction (p.22)
O For information on the window for registering lens aberration correction data in the
90D
250D
RP
M6 Mk II
M50
Introduction
, see p.25.
Contents
1
2
3
4
Downloading
Images
Displays all the categories
Lens category
Camera
Settings
Remote
Shooting
Displays lenses selected
in [Select a lens category]
by category*
Preferences
Reference
Displays only the
registered lenses
Index
No. of lenses registered in the camera/No. of lenses that can be registered
The window displayed differs depending on the camera to be connected.
O Lens names displayed in the [Register lens data]/[Register lens aberration correction
data] window may be partially shortened depending on the lens type. Note that you do * If 1D X Mk II 5D Mk IV is connected, the following are
not have to register correction data for an EF-M lens.
also displayed (p.23).
O Depending on the camera to be connected, lens model names with which the check
- Download status of DLO lens data to the computer
mark cannot be removed may be displayed in the [Register lens data]/[Register lens
- Registered status of DLO lens data to the camera
aberration correction data] window. This indicates that it is not necessary to register the
correction data for the respective lenses to the camera.
97
List of Capture Window Functions
Introduction
O Displayed items differ depending on the model and settings of the camera connected.
O For *1 to *11 explanations, see the next page.
Displays Dual Pixel RAW
shooting*11
Flash ready*2
Contents
AF mode
Warning lamp*3
Rotates shot images*4
Shoot button*5 (p.42)
Bracketing*9
Power status*1
Number of possible shots
AF/MF switch button*6
Save destination for shot images
Shutter speed
Drive mode
Shooting mode*10
White balance
Metering mode
Mirror lockup
Aperture
ISO speed
Image recording quality
Save destinations for shot images*7
Exposure Level/AEB Level
(See next page for details)
1
2
3
4
Downloading
Images
Camera
Settings
Remote
Shooting
Preferences
Displays the [Shooting menu] (p.30)
Displays the [Timer shooting settings] window
(p.73, p.75)
Displays [Flash control menu] (p.77, p.100)
Displays the [Set-up menu] (p.39)
Reference
Index
Displays the [Remote Live View window] (Movie)*8
(p.67, p.69)
Displays the [Remote Live View window]
(p.41, p.101)
Displays the [Preferences] window (p.88)
Displays the main window (p.9)
Displays the viewer window (p.13, p.96)
Shows/hides the [Quick Preview] window
98
*1
*2
*3
*4
*5
*6
*7
*8
*9
When using the battery, the charge level is displayed.
Appears after flash charging is complete and the cursor is moved to
the Shoot button.
Turns green when shooting was successful. Turns red when
shooting was unsuccessful or is impossible. Also blinks during
countdown for self-timer shooting.
Each time you click the button, the shot image rotates 90 degrees.
To make this function available, checkmark [Rotate image] in
preferences ([Remote Shooting] window) (p.89).
When the AF/MF switch button is set to [AF], AF/AE is performed when
the cursor is moved to the Shoot button.
Even when it is set to [MF], “AF” appears in the shooting information for
the shot image.
You can select the destination where the images are to be saved. In
movie mode, shot movies are saved only to the camera’s memory
card.
1D C .
Not displayed on 1D X
During HDR (High Dynamic Range) shooting on 5DS/5DS R
5D Mk IV 5D Mk III
90D
80D
6D
90D
R
RP
6D Mk II
6D
7D Mk II
, or during [HDR Backlight Control] shooting on
80D
77D
760D
800D
200D
, or during shooting with Creative filter set
to [HDR art standard], [HDR art vivid], [HDR art bold], or [HDR art
80D
M6 Mk II
M50 the icon is
embossed] on 90D
displayed as [
].
When [Multi Shot Noise Reduction] is set on 5DS/5DS R 5D Mk IV
750D
M6 Mk II
M50
R
RP
6D Mk II
6D
7D Mk II
90D
80D
77D
760D
800D
250D
200D
750D
M6 Mk II
Introduction
Exposure Level/AEB Level
O The display changes as follows by clicking the Exposure level/AEB
level item.
Contents
Exposure level adjustment
Darkest exposure
1 level darker
Brightest exposure
1 level brighter
1
2
3
4
Downloading
Images
Camera
Settings
Narrow setting
range 1 level
Widen setting
range 1 level
Setting width 0
AEB level setting
Remote
Shooting
Preferences
Maximum setting range
When the AEB bracketing setting exceeds the displayable range,
[ ], [ ] marks are displayed to show there are bracketing
indicators beyond the scale.
Reference
O Display appears as follows if [2 shots] is set for AEB shooting.
Index
, the icon is displayed as [
].
* You can set Custom shooting mode.
*11 Displays when shooting in Dual Pixel RAW.
M50
10
Exposure level can be set by clicking with your mouse. If a value
outside the maximum setting range is clicked, exposure is set to the
nearest settable value.
99
List of Flash Function Settings Window Functions
Zoom/focal length
Flash metering
(p.77)
Introduction
MULTI flash frequency
MULTI flash count
Contents
Settings update button
Flash mode
Flash exposure
compensation amount /
Flash output level*2
Syncro setting*1
Wireless function button
Channel
Sender flash ON/OFF
Wireless radio ID
Flash ratio
1
2
3
4
Downloading
Images
Camera
Settings
Remote
Shooting
Preferences
Flash output level during
wireless setting*2 /
Flash exposure
compensation amount
during wireless setting*2
Reference
Index
[Modeling flash] button
[Save] button
The window displayed differs depending on the connected camera
and flash.
[Load] button
*1
1st curtain sync/
2nd curtain sync/
Hi-speed sync
*2 Displayed information differs depending on the settings. For more details on settings,
also refer to the Instruction Manual provided with your EX-series Speedlite or camera.
100
List of Remote Live View Window (Live View Tab) Functions
Enlargement display frame
Sets the color temperature
(p.37)
Introduction
Controllers 1
Selects the white balance
(p.52)
Click white balance
Checks the depth of field (p.52)
1D C
R
Displays
Canon Log gamma setting*3
Recording level settings (p.55)
Movie recording time
Movie recording in
progress icon
Movie compression
format
Frame rate
Movie recording size
Starts/stops movie
recording
90D
80D
77D
800D
250D
200D
1D X Mk II
1D X
1D C
RP
6D Mk II
6D
800D
M6 Mk II
77D
760D
800D
250D
200D
750D
M6 Mk II
Displays Creative filter
settings
Histogram display
R
7D Mk II
5D Mk IV 5D Mk III
90D
80D
M50
Show/hide
Remote
Shooting
Preferences
Index
Display magnification*5
View Assist button*3
5DS/5DS R
Camera
Settings
Reference
Shows/hides the controllers 1
Closes the window
Controllers 2
R
77D
Auto rotation button*1
Rotates the image*2
electronic level (p.53)
*1 When automatic rotation is set, the [Remote Live View window] display
also rotates automatically to match the camera’s rotation when it is
detected that the camera is held vertically.
] is set to ON, the [
][
] buttons cannot be used
*2 When [
to rotate images.
R
*3 Displayed only when the 1D C
is connected and Canon
Log gamma is set on the camera. (For
, when 8bit is set.)
R
760D
80D
*4
Power zoom button (p.64)
1D C
90D
M50
1
2
3
4
Downloading
Images
AF mode (p.48 to p.51)
Lens drive (p.47)
AF point
Contents
Sets the aspect ratio (p.54)
Shows/hides the AF points
*4
Displayed only when the
250D
200D
750D
90D
M6 Mk II
80D
M50
77D
760D
800D
is connected and Creative
filter is set on the camera.
5
* When 5DS/5DS R is connected, the [
displayed as [
] and [
] buttons.
] and [
] buttons are
101
List of Remote Live View Window (Compose Tab) Functions
Overlay image filename
(p.57)
Introduction
Overlay image controllers
Contents
Opens an overlay image (p.57)
Moves and displays the overlay image (p.60)
Enlarge/Reduce slider (p.58)
Rotate slider (p.59)
Composite Ratio slider (p.59)
Resets the overlay image (p.58 to p.60)
Grid display (p.61 to p.62)
1
2
3
4
Downloading
Images
Camera
Settings
Remote
Shooting
Preferences
Guides display (p.62 to p.63)
Reference
Index
102
List of Zoom View Window Functions
Moves the display position
(p.47)
Sets the color temperature
Introduction
Controllers 1
Contents
Selects the white balance
(p.52)
Click white balance
AF mode (p.48 to p.51)
Lens drive (p.47)
Checks the depth of field
(p.52)
Moves the display
position
Shows/hides the controllers 1
Moves the display position
1
2
3
4
Downloading
Images
Camera
Settings
Remote
Shooting
Preferences
Magnified display position
Reference
Moves the display
position
Index
Closes the window
Display magnification
Rotates the image
Controllers 2
AF point show/hide
103
Index
A
Adjusting the Horizontal Alignment of the Camera
(Remote Live View Shooting) .............................................................
Adjusting the Vertical Alignment of the Camera
(Remote Live View Shooting) .............................................................
Adjusting the White Balance ...............................................................
Applying Personal White Balance.......................................................
Focusing Using AF .............................................................................. 48
53
53
35
28
L
Linked Software Settings (Preferences) .............................................. 90
Overlaid Display Function (Remote Live View Shooting) .................... 57
P
Power Zoom Operation ....................................................................... 64
Basic Settings (Preferences) .............................................................. 88
Bulb Timer........................................................................................... 76
Q
Capture Window ................................................................................. 98
Flash Control Menu ...................................................................... 78
Shooting Menu ............................................................................. 31
Changing the Aspect Ratio (Remote Live View Shooting).................. 54
Changing the White Balance in the Remote Live View Window
(Remote Live View Shooting) ............................................................. 52
Checking the Depth of Field and Exposure
(Remote Live View Shooting) ............................................................. 52
Connecting the Camera to Your Computer........................................... 7
D
Destination Folder Settings (Preferences) ..........................................
Downloading All the Images in a Single Operation.............................
Downloading and Erasing GPS Log Files from a Camera..................
Downloading Selected Images ...........................................................
88
11
15
12
F
File Name Settings (Preferences)....................................................... 89
Flash Control Menu (Capture Window)............................................... 78
Flash function settings Window ........................................................ 100
Flash shooting..................................................................................... 77
Focusing Automatically (Using AF) (Remote Live View Shooting) ..... 48
Focusing in Face Detection Live Mode (Remote Live View
Shooting)............................................................................................. 50
Focusing in Live Mode (Remote Live View Shooting) ........................ 49
Focusing in Quick Mode (Remote Live View Shooting)...................... 48
Focusing Manually (Remote Live View Shooting) .............................. 46
Contents
O
B
C
Introduction
Quitting the EOS Utility........................................................................ 16
R
Register Lens Data/Lens Aberration Correction Data Window ........... 97
Registering Background Music to a Camera Memory Card ................ 81
Registering IPTC Information .............................................................. 86
Remote Bulb Shooting......................................................................... 75
Remote Interval Timer Shooting.......................................................... 73
Remote Live View Shooting ................................................................ 37
Remote Live View Window.......................................................... 41, 101
Remote Live View Window Functions ................................................. 46
Adjusting the Horizontal Alignment of the Camera ....................... 53
Adjusting the Vertical Alignment of the Camera ........................... 53
Changing the Aspect Ratio ........................................................... 54
Changing the White Balance in the Remote Live View Window ... 52
Checking the Depth of Field and Exposure .................................. 52
Focusing Automatically (Using AF) ............................................... 48
Focusing in Face Detection Live Mode ......................................... 50
Focusing in Live Mode .................................................................. 49
Focusing in Quick Mode ............................................................... 48
Focusing Manually ........................................................................ 46
Overlaid Display Function ............................................................. 57
Remote Shooting Settings (Preferences) ............................................ 89
1
2
3
4
Downloading
Images
Camera
Settings
Remote
Shooting
Preferences
Reference
Index
S
Setting JPEG Quality........................................................................... 34
Setting Picture Styles .......................................................................... 32
Setting Web Services .......................................................................... 84
Shooting by Operating the Camera ..................................................... 66
Shooting Menu (Capture Window) ...................................................... 31
104
Introduction
Shooting Movies ................................................................................. 67
Specifying Preferences ....................................................................... 88
Basic Settings............................................................................... 88
Destination Folder Settings .......................................................... 88
File Name Settings ....................................................................... 89
Linked Software Settings.............................................................. 90
Remote Shooting Settings............................................................ 89
Time Settings ............................................................................... 90
Starting up EOS Utility .......................................................................... 9
Supported Camera................................................................................ 3
System Requirements........................................................................... 2
Contents
1
2
3
4
Downloading
Images
Camera
Settings
T
Time Settings (Preferences) ............................................................... 90
Timer Shooting.................................................................................... 73
Remote
Shooting
U
Uninstalling the Software .................................................................... 95
Preferences
V
Viewer Window ............................................................................. 13, 96
Z
Zoom View Window .................................................................... 47, 103
About This Instruction Manual
O It is prohibited to reproduce, in whole or part, the contents of this
Instruction Manual without permission.
O Canon may change without notice the software specifications and
contents of this Instruction Manual.
O The software screens and displays printed in this Instruction Manual
may differ slightly from the actual software.
O Please note that irrespective of the above-mentioned, Canon does
not take responsibility for the outcome of the operation of the
software.
Reference
Index
Trademarks
O Macintosh and Mac OS are trademarks of Apple Inc., registered in the
U.S. and other countries.
O All other trademarks are the property of their respective owners.
105
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising