LG | 75SM9900PLA | User manual | LG 75SM9900PLA Gebruikershandleiding

LG 75SM9900PLA Gebruikershandleiding
OWNER’S MANUAL
Safety and Reference
LED TV*
* LG LED TV applies LCD screen with LED backlights.
Please read this manual carefully before operating your set and retain it for
future reference.
*MFL71460623*
(1906-REV00)
www.lg.com
Copyright © 2019 LG Electronics Inc. All Rights Reserved.
Warning! Safety
instructions
_index
ENGLISH
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE.
REFER TO QUALIFIED SERVICE PERSONNEL.
This symbol is intended to alert the user to the presence of
uninsulated “dangerous voltage” within the product’s
enclosure that may be of sufficient magnitude to constitute a risk
of electric shock to persons.
This symbol is intended to alert the user to the presence of
important operating and maintenance (servicing)
instructions in the literature accompanying the appliance.
WARNING : TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO
NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
•• TO PREVENT THE SPREAD OF FIRE, KEEP CANDLES OR OTHER ITEMS
WITH OPEN FLAMES AWAY FROM THIS PRODUCT AT ALL TIMES.
•• Do not place the TV and/or remote control in the following
environments:
-- Keep the product away from direct sunlight.
-- An area with high humidity such as a bathroom
-- Near any heat source such as stoves and other devices that
produce heat.
-- Near kitchen counters or humidifiers where they can easily be
exposed to steam or oil.
-- An area exposed to rain or wind.
-- Do not expose to dripping or splashing and do not place objects
filled with liquids, such as vases, cups, etc. on or over the
apparatus (e.g., on shelves above the unit).
-- Near flammable objects such as gasoline or candles, or expose
the TV to direct air conditioning.
-- Do not install in excessively dusty places.
Otherwise, this may result in fire, electric shock, combustion/
explosion, malfunction or product deformation.
2
•• Ventilation
-- Install your TV where there is proper ventilation. Do not install in
a confined space such as a bookcase.
-- Do not install the product on a carpet or cushion.
-- Do not block or cover the product with cloth or other materials
while unit is plugged in.
•• Take care not to touch the ventilation openings. When watching
the TV for a long period, the ventilation openings may become hot.
•• Protect the power cord from physical or mechanical abuse, such as
being twisted, kinked, pinched, closed in a door, or walked upon.
Pay particular attention to plugs, wall outlets, and the point where
the cord exits the device.
•• Do not move the TV whilst the Power cord is plugged in.
•• Do not use a damaged or loosely fitting power cord.
•• Be sure do grasp the plug when unplugging the power cord. Do not
pull on the power cord to unplug the TV.
•• Do not connect too many devices to the same AC power outlet as
this could result in fire or electric shock.
•• Disconnecting the Device from the Main Power
-- The power plug is the disconnecting device. In case of an
emergency, the power plug must remain readily accessible.
•• Do not let your children climb or cling onto the TV. Otherwise, the
TV may fall over, which may cause serious injury.
•• Outdoor Antenna Grounding (Can differ by country):
-- If an outdoor antenna is installed, follow the precautions below.
An outdoor antenna system should not be located in the vicinity
of overhead power lines or other electric light or power circuits,
or where it can come in contact with such power lines or circuits
as death or serious injury can occur.
Be sure the antenna system is grounded to provide some
protection against voltage surges and built-up static charges.
Section 810 of the National Electrical Code (NEC) in the U.S.A.
provides information with respect to proper grounding of the
mast and supporting structure, grounding of the lead-in wire
to an antenna discharge unit, size of grounding conductors,
location of antenna discharge unit, connection to grounding
electrodes and requirements for the grounding electrode.
Antenna grounding according to the National Electrical Code,
ANSI/NFPA 70
_index
•• Handle the adapter carefully to avoid dropping or striking it. An
impact could damage the adapter.
•• To reduce the risk of fire or electrical shock, do not touch the TV
with wet hands. If the power cord prongs are wet or covered with
dust, dry the power plug completely or wipe dust off.
•• Batteries
-- Store the accessories (battery, etc.) in a safe location out of the
reach of children.
-- Do not short circuit, disassemble, or allow the batteries to
overheat. Do not dispose of batteries in a fire. Batteries should
not be exposed to excessive heat.
•• Moving
-- When moving, make sure the product is turned off, unplugged,
and all cables have been removed. It may take 2 or more people
to carry larger TVs. Do not press or put stress on the front panel
of the TV. Otherwise, this may result in product damage, fire
hazard or injury.
•• Keep the packing anti-moisture material or vinyl packing out of the
reach of children.
•• Do not allow an impact shock, any objects to fall into the product,
and do not drop anything onto the screen.
•• Do not press strongly upon the panel with a hand or a sharp
object such as a nail, pencil, or pen, or make a scratch on it. It may
cause damage to screen.
•• Cleaning
-- When cleaning, unplug the power cord and wipe gently with a
soft/dry cloth. Do not spray water or other liquids directly on the
TV. Do not clean your TV with chemicals including glass cleaner,
any type of air freshener, insecticide, lubricants, wax (car,
industrial), abrasive, thinner, benzene, alcohol etc., which can
damage the product and/or its panel. Otherwise, this may result
in electric shock or product damage.
ENGLISH
•• Grounding (Except for devices which are not grounded.)
-- TV with a three-prong grounded AC plug must be connected to
a three-prong grounded AC outlet. Ensure that you connect the
earth ground wire to prevent possible electric shock.
•• Never touch this apparatus or antenna during a lightning storm.
You may be electrocuted.
•• Make sure the power cord is connected securely to the TV and wall
socket if not secured damage to the Plug and socket may occur and
in extreme cases a fire may break out.
•• Do not insert metallic or inflammable objects into the product. If a
foreign object is dropped into the product, unplug the power cord
and contact the customer service.
•• Do not touch the end of the power cord while it is plugged in. You
may be electrocuted.
•• If any of the following occur, unplug the product
immediately and contact your local customer service.
-- The product has been damaged.
-- If water or another substance enters the product (like an AC
adapter, power cord, or TV).
-- If you smell smoke or other odors coming from the TV
-- When lightning storms or when unused for long periods of time.
Even the TV is turned off by remote control or button, AC power
source is connected to the unit if not unplugged in.
•• Do not use high voltage electrical equipment near the TV (e.g., a
bug zapper). This may result in product malfunction.
•• Do not attempt to modify this product in any way without written
authorization from LG Electronics. Accidental fire or electric shock
can occur. Contact your local customer service for service or repair.
Unauthorized modification could void the user’s authority to
operate this product.
•• Use only an authorized attachments / accessories approved by
LG Electronics. Otherwise, this may result in fire, electric shock,
malfunction, or product damage.
•• Never disassemble the AC adapter or power cord. This may result in
fire or electric shock.
3
Preparing
Separate Purchase
_index
ENGLISH
•• If the TV is turned on for the first time after it was shipped from the
factory, initialization of the TV may take a few minutes.
•• Image shown may differ from your TV.
•• Your TV’s OSD (On Screen Display) may differ slightly from that
shown in this manual.
•• The available menus and options may differ from the input source
or product model that you are using.
•• New features may be added to this TV in the future.
•• The device must be easily accessed to a location outlet near the
access. Some devices are not made by turning on / off button,
turning off the device and unplugging the power cord.
•• The items supplied with your product may vary depending on the
model.
•• Product specifications or contents of this manual may be changed
without prior notice due to upgrade of product functions.
•• For an optimal connection, HDMI cables and USB devices should
have bezels less than 10 mm thick and 18 mm width. Use an
extension cable that supports
if the USB cable or USB
memory stick does not fit into your TV’s USB port.
B
B
A
A
* A<
= 10 mm
* B<
= 18 mm
•• Use a certified cable with the HDMI logo attached.
•• If you do not use a certified HDMI cable, the screen may not display
or a connection error may occur. (Recommended HDMI Cable Types)
-- Ultra High-Speed HDMI®/TM cable (3 m or less)
4
Separate purchase items can be changed or modified for quality
improvement without any notification. Contact your dealer to buy these
items. These devices only work with certain models.
The model name or design may be changed depending on the upgrade
of product functions, manufacturer’s circumstances or policies.
Magic Remote Control
AN-MR19BA
Check whether your TV model supports Bluetooth in the Wireless
Module Specification to verify whether it can be used with the Magic
Remote.
Lifting and moving the TV
Make sure to use screws and wall mount bracket that meet the VESA
standard. Standard dimensions for the wall mount kits are described in
the following table.
Please note the following advice to prevent the TV from being scratched
or damaged and for safe transportation regardless of its type and size.
A
B
Model
75SM99*
VESA (A x B) (mm)
Standard screw
Number of screws
Wall mount bracket
600 x 400
M8
4
LSW640B
_index
•• It is recommended to move the TV in the box or packing material
that the TV originally came in.
•• Before moving or lifting the TV, disconnect the power cord and all
cables.
•• When holding the TV, the screen should face away from you to
avoid damage.
ENGLISH
Wall Mounting Bracket
•• Hold the top and bottom of the TV frame firmly. Make sure not to
hold the transparent part, speaker, or speaker grill area.
•• When transporting a large TV, there should be at least 2 people.
•• When transporting the TV by hand, hold the TV as shown in the
following illustration.
•• When transporting the TV, do not expose the TV to jolts or excessive
vibration.
•• When transporting the TV, keep the TV upright, never turn the TV
on its side or tilt towards the left or right.
•• Do not apply excessive pressure to cause flexing / bending of frame
chassis as it may damage screen.
•• When handling the TV, be careful not to damage the protruding
buttons.
5
Securing TV to the Wall
_index
ENGLISH
•• Avoid touching the screen at all times, as this may result in
damage to the screen.
•• When attaching the stand to the TV set, place the screen
facing down on a cushioned table or flat surface to protect
the screen from scratches.
Mounting on a Table
1 Lift and tilt the TV into its upright position on a table.
• Leave a 10 cm (minimum) space from the wall for proper
ventilation.
10 cm
10 cm
10 cm
10 cm
10 cm
(Depending on model)
2 Connect the power cord to a wall outlet.
•• Do not apply foreign substances (oils, lubricants, etc.) to
the screw parts when assembling the product. (Doing so
may damage the product.)
•• If you install the TV on a stand, you need to take actions
to prevent the product from overturning. Otherwise, the
product may fall over, which may cause injury.
•• Do not use any unapproved items to ensure the safety and
product life span.
•• Any damage or injuries caused by using unapproved items
are not covered by the warranty.
•• Make sure that the screws are inserted correctly and
fastened securely. (If they are not fastened securely
enough, the TV may tilt forward after being installed.)
Do not use too much force and over tighten the screws;
otherwise screw may be damaged and not tighten
correctly.
6
(Depending on model)
1 Insert and tighten the eye-bolts, or TV brackets and bolts on the
back of the TV.
• If there are bolts inserted at the eye-bolts position, remove the
bolts first.
2 Mount the wall brackets with the bolts to the wall. Match the
location of the wall bracket and the eye-bolts on the rear of the TV.
3 Connect the eye-bolts and wall brackets tightly with a sturdy rope.
Make sure to keep the rope horizontal with the flat surface.
•• Use a platform or cabinet that is strong and large enough to
support the TV securely.
•• Brackets, bolts and ropes are not provided. You can obtain
additional accessories from your local dealer.
Mounting to the Wall
10 cm
_index
10 cm
ENGLISH
Attach an optional wall mount bracket at the rear of the TV carefully
and install the wall mount bracket on a solid wall perpendicular to
the floor. When you attach the TV to other building materials, please
contact qualified personnel. LG recommends that wall mounting be
performed by a qualified professional installer. We recommend the use
of LG’s wall mount bracket. LG’s wall mount bracket is easy to move with
cables connected. When you do not use LG’s wall mount bracket, please
use a wall mount bracket where the device is adequately secured to the
wall with enough space to allow connectivity to external devices. It is
advised to connect all the cables before installing fixed wall mounts.
m
10 c
10 cm
10 cm
(Depending on model)
•• Remove the stand before installing the TV on a wall mount
by performing the stand attachment in reverse.
•• For more information of screws and wall mount bracket,
refer to the Separate Purchase.
•• If you intend to mount the product to a wall, attach VESA
standard mounting interface (optional parts) to the back
of the product. When you install the set to use the wall
mounting bracket (optional parts), fix it carefully so as
not to drop.
•• When mounting a TV on the wall, make sure not to install
the TV by hanging the power and signal cables on the back
of the TV.
•• Do not install this product on a wall if it could be exposed
to oil or oil mist. This may damage the product and cause
it to fall.
(Depending on model)
•• Do not use a sharp object when you detached the cable
cover. This could damage the cable or the cabinet. It may
also cause personal harm. (Depending on model)
•• When installing the wall mounting bracket, it is recommended to
cover the stand hole using tape, in order to prevent the influx of
dust and insects. (Depending on model)
Stand hole
7
Connections
_index
ENGLISH
Connect various external devices to the TV and switch input modes to
select an external device. For more information of external device’s
connection, refer to the manual provided with each device.
•• Certain 8K input/decoding standards may not be supported.
An additional device may be necessary to support certain 8K
standards. Upscaled and enhanced 8K images will vary depending
on the source content.
Antenna/Cable
Connect the TV to a wall antenna socket with an RF cable (75 Ω).
•• Use a signal splitter to use more than 2 TVs.
•• If the image quality is poor, install a signal amplifier properly to
improve the image quality.
•• If the image quality is poor with an antenna connected, try to
realign the antenna in the correct direction.
•• An antenna cable and converter are not supplied.
•• For a location that is not supported with ULTRA HD broadcasting,
this TV cannot receive ULTRA HD broadcasts directly.
Satellite dish
Connect the TV to a satellite dish to a satellite socket with a satellite RF
cable (75 Ω). (Depending on model)
CI module
View the encrypted (pay) services in digital TV mode. (Depending on
model)
•• Check if the CI module is inserted into the PCMCIA card slot in the
right direction. If the module is not inserted properly, this can
cause damage to the TV and the PCMCIA card slot.
•• If the TV does not display any video and audio when CI+ CAM is
connected, please contact to the Terrestrial/Cable/Satellite Service
Operator.
8
Other connections
Connect your TV to external devices. For the best picture and audio
quality, connect the external device and the TV with the HDMI cable.
Some separate cable is not provided.
HDMI
•• When connecting the HDMI cable, the product and external devices
should be turned off and unplugged.
•• Supported HDMI Audio format (Depending on model):
DTS (44.1 kHz / 48 kHz / 88.2 kHz / 96 kHz),
DTS HD (44.1 kHz / 48 kHz / 88.2 kHz / 96 kHz / 176.4 kHz / 192
kHz),
True HD (48 kHz),
Dolby Digital / Dolby Digital Plus (32 kHz / 44.1 kHz / 48 kHz),
PCM (32 kHz / 44.1 kHz / 48 kHz / 96 kHz / 192 kHz)
••
→ ( ) → [Picture] → [Additional Settings] → [HDMI
ULTRA HD Deep Colour]
-- 8K: Support 8K @ 60 Hz (4:2:0), 8K @ 30 Hz (4:4:4, 4:2:2, 4:2:0)
-- 4K: Support 4K @ 50/60 Hz (4:4:4, 4:2:2, 4:2:0)
-- Off: Support 4K @ 50/60 Hz 8 bit (4:2:0)
If the device connected to Input Port also supports ULTRA HD Deep
Colour, your picture may be clearer. However, if the device doesn’t
support it, it may not work properly. In that case, change the TV’s
[HDMI ULTRA HD Deep Colour] setting to off.
USB
Some USB Hubs may not work. If a USB device connected using a USB
Hub is not detected, connect it to the USB port on the TV directly.
External Devices
Available external devices are: Blu-ray player, HD receivers, DVD players,
VCRs, audio systems, USB storage devices, PC, gaming devices, and
other external devices.
You can simply operate the TV functions, using the button.
_index
ENGLISH
•• The external device connection may differ from the model.
•• Connect external devices to the TV regardless of the order of the
TV port.
•• If you record a TV program on a Blu-ray/DVD recorder or VCR, make
sure to connect the TV signal input cable to the TV through a DVD
recorder or VCR. For more information of recording, refer to the
manual provided with the connected device.
•• Refer to the external equipment’s manual for operating
instructions.
•• If you connect a gaming device to the TV, use the cable supplied
with the gaming device.
•• In PC mode, there may be noise associated with the resolution,
vertical pattern, contrast or brightness. If noise is present, change
the PC output to another resolution, change the refresh rate to
another rate or adjust the brightness and contrast on the [PICTURE]
menu until the picture is clear.
•• In PC mode, some resolution settings may not work properly
depending on the graphics card.
•• If ULTRA HD content is played on your PC, video or audio may
become disrupted intermittently depending on your PC’s
performance. (Depending on model)
•• When connecting via a wired LAN, it is recommended to use a CAT
7 cable. (Only when
port is provided.)
Using Button
Basic functions
Power On (Press)
Power Off1 (Press and Hold)
Menu Control (Press2)
Menu Selection (Press and Hold3)
1 All running apps will close, and any recording in progress will stop.
(Depending on country)
2 You can access and adjust the menu by pressing the button when
TV is on.
3 You can use the function when you access menu control.
Adjusting the menu
When the TV is turned on, press the
the Menu items using the button.
button one time. You can adjust
Turns the power off.
Changes the input source.
Adjusts the volume level.
Scrolls through the saved programmes.
9
Using Magic Remote
Control
_index
ENGLISH
(Depending on model)
The descriptions in this manual are based on the buttons on the remote
control. Please read this manual carefully and use the TV correctly.
When the message [Magic Remote battery is low. Please change the
battery.] is displayed, replace the battery.
To replace batteries, open the battery cover, replace batteries (1.5 V AA)
matching the and ends to the label inside the compartment,
and close the battery cover. Be sure to point the magic remote toward
the remote control sensor on the TV. To remove the batteries, perform
the installation actions in reverse.
To use the button, press and hold for more than 1 second.
(POWER) Turns the TV on or off.
/
You can turn your set-top box on or off by adding the settop box to the universal remote control for your TV.
Number buttons Enters numbers.
Accesses the [QUICK HELP].
(DASH) Inserts a between numbers such as 2-1 and 2-2.
/
Accesses the saved programmes list.
(MORE ACTIONS) Displays more remote control functions.
Edits QUICK ACCESS.
-- QUICK ACCESS is a feature that allows you to enter a specified app
or Live TV directly by pressing and holding the number buttons.
Audio descriptions function will be enabled.
Adjusts the volume level.
(MUTE) Mutes all sounds.
(MUTE) Accesses the [Accessibility] menu.
Scrolls through the saved programmes.
(Voice recognition) Network connection is required to use the
voice recognition function. Once the voice display bar is activated on
the TV screen, press and hold the button and speak your command
out loud.
(HOME) Accesses the Home menu.
(HOME) Shows the previous history.
(Q. Settings) Accesses the Quick Settings.
(Q. Settings) Displays the [All Settings] menu.
Wheel (OK) Press the center of button to select a menu. You
can change programmes by using button.
(up/down/left/right) Press the up, down, left or right
button to scroll the menu. If you press
buttons while the
pointer is in use, the pointer will disappear from the screen and Magic
Remote will operate like a general remote control. To display the
pointer on the screen again, shake Magic Remote to the left and right.
1
1
1
1
1
(Some buttons and services may not be provided depending on models
or regions.)
10
/
Registering Magic Remote Control
Press the /
and (HOME) buttons at the same time, for five
seconds, to unpair the Magic Remote with your TV.
* Pressing and holding the
/
reregister Magic Remote at once.
button will let you cancel and
•• Do not mix new batteries with old batteries. This may
cause the batteries to overheat and leak.
•• Failure to match the correct polarities of the battery may
cause the battery to burst or leak, resulting in fire, personal
injury, or ambient pollution.
•• This apparatus uses batteries. In your community there
might be regulations that require you to dispose of these
batteries properly due to environmental considerations.
Please contact your local authorities for disposal or
recycling information.
•• Batteries inside or inside the product shall not be exposed
to excessive heat such as sunshine, fire or the like.
_index
-- When you are not watching via a set-top box: the display changes
to the set-top box screen.
,
,
,
These access special functions in some
menus.
Runs the record function.
, (Control buttons) Controls media contents.
How to deregister the Magic Remote
Control
ENGLISH
Returns to the previous level.
/
Clears on-screen displays and returns to last input
viewing.
/
Shows programme guide.
1 Streaming Service buttons Connects to the Video Streaming
Service.
(INPUT) Changes the input source.
(INPUT) Accesses the [HOME DASHBOARD].
Displays the set-top box Home menu.
How to register the Magic Remote Control
To use the Magic Remote, first pair it with your TV.
1 Put batteries into the Magic Remote and turn the TV on.
2 Point the Magic Remote at your TV and press the Wheel (OK)
on the remote control.
* If the TV fails to register the Magic Remote, try again after turning the
TV off and back on.
User Guide
For more information about this TV, read the USER GUIDE embedded in
the product. (Depending on model)
•• To open the USER GUIDE
→
[About This TV] → [User Guide]
(
) → [General] →
11
Troubleshooting
Cannot control the TV with the remote control.
_index
ENGLISH
•• Check the remote control sensor on the product and try again.
•• Check if there is any obstacle between the product and the remote
control.
•• Check if the batteries are still working and properly installed (
to , to ).
No image display and no sound is produced.
•• Check if the product is turned on.
•• Check if the power cord is connected to a wall outlet.
•• Check if there is a problem in the wall outlet by connecting other
products.
The TV turns off suddenly.
•• Check the power control settings. The power supply may be
interrupted.
•• Check if the auto-off function is activated on the settings related
time.
•• If there is no signal while the TV is on, the TV will turn off
automatically after 15 minutes of inactivity.
When connecting to the PC (HDMI), no signal is detected.
•• Turn the TV off/on using the remote control.
•• Reconnect the HDMI cable.
•• Restart the PC with the TV on.
•• You may find different brightness and colour of the panel
depending on your viewing position(left/right/top/down).
This phenomenon occurs due to the characteristic of the panel.
It is not related with the product performance, and it is not
malfunction.
•• Displaying a still image for a prolonged period of time may cause
image sticking. Avoid displaying a fixed image on the TV screen for
a long period of time.
Generated Sound
•• “Cracking” noise: A cracking noise that occurs when watching or
turning off the TV is generated by plastic thermal contraction due
to temperature and humidity. This noise is common for products
where thermal deformation is required.
•• Electrical circuit humming/panel buzzing: A low level noise is
generated from a high-speed switching circuit, which supplies a
large amount of current to operate a product. It varies depending
on the product. This generated sound does not affect the
performance and reliability of the product.
•• When cleaning the product, be careful not to allow any
liquid or foreign objects to enter the gap between the
upper, left or right side of the panel and the guide panel.
(Depending on model)
Abnormal Display
•• If the product feels cold to the touch, there may be a small “flicker”
when it is turned on. This is normal, there is nothing wrong with
product.
•• This panel is an advanced product that contains millions of pixels.
You may see tiny black dots and/or brightly coloured dots (red, blue
or green) at a size of 1 ppm on the panel. This does not indicate a
malfunction and does not affect the performance and reliability of
the product. This phenomenon also occurs in third-party products
and is not subject to exchange or refund.
12
•• Make sure to wring any excess water or cleaner from the
cloth.
•• Do not spray water or cleaner directly onto the TV screen.
•• Make sure to spray just enough of water or cleaner onto a
dry cloth to wipe the screen.
Specifications
Broadcasting Specifications
Channel coverage
(Band)
950~2150 MHz
Maximum number of
storable programmes
DVB-T/T2
DVB-C
DVB-S/S2
PAL/SECAM B/G, D/K, I
SECAM L
_index
DVB-S/S21
Analogue TV
(Depending on country)
ENGLISH
Television system
Digital TV
(Depending on country)
DVB-C1
DVB-T/T21
46 ~ 890 MHz
VHF III : 174 ~ 230 MHz
UHF IV : 470 ~ 606 MHz
UHF V : 606 ~ 862 MHz
S Band II : 230 ~ 300 MHz
S Band III : 300 ~ 470 MHz
6000
46 ~ 862 MHz
3000
External antenna
impedance
75 Ω
CI Module (W x H x D)
100.0 mm x 55.0 mm x 5.0 mm
1 Only DVB-T2/C/S2 support model only.
Wireless module(LGSBWAC92)Specifications
Wireless LAN (IEEE 802.11a/b/g/n/ac)
Frequency range
Output Power (Max.)
2400 to 2483.5 MHz
5150 to 5725 MHz
5725 to 5850 MHz (Not for EU)
18 dBm
18 dBm
12 dBm
Bluetooth
Frequency range
Output power(Max.)
2400 to 2483.5 MHz
8 dBm
As band channels can vary per country, the user cannot change or adjust the operating frequency. This product is configured for the regional
frequency table.
For consideration of the user, this device should be installed and operated with a minimum distance of 20 cm between the device and the body.
* IEEE 802.11ac is not available in all countries.
13
Environment condition
0 °C to 40 °C
Operating Humidity
Less than 80 %
Storage Temperature
-20 °C to 60 °C
Storage Humidity
Less than 85 %
_index
ENGLISH
Operating Temperature
14
Open Source Software
Notice Information
_index
ENGLISH
To obtain the source code under GPL, LGPL, MPL, and other open
source licenses, that is contained in this product, please visit http://
opensource.lge.com.
In addition to the source code, all referred license terms, warranty
disclaimers and copyright notices are available for download.
LG Electronics will also provide open source code to you on CD-ROM
for a charge covering the cost of performing such distribution (such
as the cost of media, shipping, and handling) upon email request to
opensource@lge.com.
This offer is valid for a period of three years after our last shipment of
this product. This offer is valid to anyone in receipt of this information.
Licenses
(Magic Remote supported models only)
15
The model and serial number of the product are located
on the back and on one side of the product. Record them
below in case you ever need service.
Model
Serial No.
SMART TV Quick Setup Guide
* Image shown may differ from your TV.
* Image shown on a PC or mobile phone may vary depending on the OS(Operating System).
* App icon positions may vary on the platform, depending on the software version.
Network Settings
1 Press the (Settings) on the remote to
access the settings menu. Point the
( ) [All
Settings] icon and select by pressing the
Wheel (OK) button on the remote.
4 If the connection is successful, the "[Connected
to Internet]" is displayed.
Picture
CONNECTION
Sound
TV Name
Programmes
Wired Connection (Ethernet)
Not Connected
Connection
Wi-Fi Connection
Connected to Internet
General
Device Connector
Mobile TV on
( )
Safety
All Settings
Accessibility
2 Select the [Connection] → [Wired
Connection(Ethernet)] or [Wi-Fi Connection].
Picture
Sound
Programmes
Picture
TV Name
Sound
Wired Connection (Ethernet)
Programmes
Wi-Fi Connection
Connection
Device Connector
Mobile TV on
Safety
WI-FI CONNECTION
Connection /
Not Connected
General
HDMI Device Settings
You can check the status of connection in [Advanced Wi-Fi settings].
CONNECTION
Not Connected
Connection
Screen Share Settings
General
Add a Hidden Wireless Network
Connect via WPS PBC
Screen Share Settings
Safety
HDMI Device Settings
Connect via WPS PIN
Advanced Wi-Fi Settings
Accessibility
Accessibility
3 The device automatically tries to connect to the
network available (wired network first).
When you select the [Wi-Fi Connection], the
network list available is displayed. Choose the
network you wish to use.
Picture
WI-FI CONNECTION
Connection /
Sound
Programmes
Connection
General
Add a Hidden Wireless Network
Connect via WPS PBC
Safety
Connect via WPS PIN
Advanced Wi-Fi Settings
Accessibility
For wireless AP (Router) that have the
you need to enter the security key.
symbol,
www.lg.com
Troubleshooting Network Problems
1 Press the (Settings) on the remote to
access the settings menu. Point the
( ) [All
Settings] icon and select by pressing the
Wheel (OK) button on the remote.
Check the AP (Router) or consult your Internet
service provider.
When X appears next to Gateway:
( )
1 Unplug the power cord of the AP (Router) and
try to connect after 5 seconds.
All Settings
2 Initialize (Reset) the AP (Router).
2 Select the [Connection] → [Wired Connection
(Ethernet)] or [Wi-Fi Connection] → [Advanced
Wi-Fi Settings].
Picture
CONNECTION
Picture
3 Contact internet service provider or AP (Router)
company.
WI-FI CONNECTION
Connection /
Sound
Sound
TV Name
Programmes
Programmes
Wired Connection (Ethernet)
Not Connected
Connection
Wi-Fi Connection

When X appears next to DNS:
Connection
Not Connected
General
Device Connector
General
Mobile TV on
Safety
Connect via WPS PBC
Safety
Screen Share Settings
Connect via WPS PIN
Advanced Wi-Fi Settings
HDMI Device Settings
Accessibility
Add a Hidden Wireless Network
Accessibility
Follow the instructions below that correlate to your
network status.
Check the TV or the AP (Router).
1 Unplug the power cord of the AP (Router) and
try to connect after 5 seconds.
2 Initialize (Reset) the AP (Router).
3 Check that the MAC address of the TV/AP (Router)
is registered with your Internet service provider.
(The MAC address displayed on the right
pane of the network status window should be
registered with your Internet service provider.)
4 Check the AP (Router) manufacturer’s website
to make sure your router has the latest firmware
version installed.
When X appears next to TV:
1 Check the connection status of the TV, AP
(Router).
2 Power off and power on the TV, AP (Router).
3 If you are using a static IP, enter the IP directly.
4 Contact internet service provider or AP (Router)
company.
SmartShare Connection to Smartphone
1 Check that Wi-Fi is enabled on your smartphone. To use SmartShare, both devices must on the
same local network.
2 Install/run the app for sharing content on your smartphone (It's called LG TV Plus on LG phones).
3 Enable your smartphone to share content files with other devices.
4 Select the file type you want to play (movie, audio or photo).
5 Select a movie, music or photo file to play on the TV.
6 Play the media file to view and enjoy it on your TV.
Updating the TV Firmware
* If the TV is turned on for the first time after it was shipped from the factory, initialization of the TV may
take a few minutes.
1
(Settings) →
(
)[All Settings] →
[General] → [About This TV] → [CHECK FOR UPDATES]
2 After checking the version of the software, update it.
If you check the "[Allow Automatic Updates]", you can update the software automatically.
Picture
Sound
Programmes
GENERAL
AI Service
General
Safety
Accessibility
General /
Software Version
Location
Timers
Account Management
Eco Mode
About This TV
Additional Settings
ABOUT THIS TV
Sound
Language
Time & Date
Connection
Picture
Programmes

Connection
General
Allow Automatic Updates
CHECK FOR UPDATES
TV Information
Notifications
Safety
Accessibility
User Guide
Quick Help
Please call LG Customer Service if you experience any problems.
Kurzanleitung zur Einrichtung des SMART TV
* Ihr TV-Gerät kann von der Abbildung möglicherweise leicht abweichen.
* Auf PC oder Mobiltelefon angezeigte Bilder können je nach Betriebssystem leicht abweichen.
* Die Positionen der Anwendungssymbole können auf der Plattform je nach Softwareversion variieren.
Netzwerkeinstellungen
1 Drücken Sie zur Anzeige des EinstellungenMenüs die Taste (Einstellungen) auf der
Fernbedienung. Wählen Sie das Symbol
( ) [Alle Einstellungen] aus und bestätigen
Sie es durch Drücken der Taste Rad (OK) auf
der Fernbedienung.
4 Wenn die Verbindung hergestellt wurde, wird
„[Mit dem Internet verbunden]“ angezeigt.
Bild
ANSCHLUSS
Ton
Name des TV-Geräts
Sender
Drahtgebundene Verbindung (Ethernet)
Nicht verbunden
Anschluss
Wi-Fi-Verbindung
Mit dem Internet verbunden
Allgemein
Geräteanschluss
TV-Gerät per Mobilgerät einschalten
Sicherheit
Barrierefreiheit
( )
Einstellungen für den Screen Share
HDMI-Geräteeinstellungen
Alle Einstellungen
2 Wählen Sie [Anschluss] → [Drahtgebundene
Verbindung (Ethernet)] oder [Wi-Fi-Verbindung].
Sie können den Verbindungsstatus unter [Erweiterte Wi-Fi-Einstellungen] prüfen.
Bild
Bild
Ton
Sender
ANSCHLUSS
Anschluss /
Sender
Name des TV-Geräts
Drahtgebundene Verbindung (Ethernet)
Anschluss
Nicht verbunden
Anschluss
Wi-Fi-Verbindung
Allgemein
Nicht verbunden
Allgemein
Verstecktes W-LAN hinzufügen
Über WPS-PBC verbinden
Geräteanschluss
Sicherheit
TV-Gerät per Mobilgerät einschalten
Sicherheit
WI-FI-VERBINDUNG
Ton
Über WPS-PIN verbinden
Erweiterte Wi-Fi-Einstellungen
Einstellungen für den Screen Share
Barrierefreiheit
HDMI-Geräteeinstellungen
Barrierefreiheit
3 Das Gerät versucht automatisch, eine Verbindung zu dem verfügbaren Netzwerk herzustellen (zuerst über das kabelgebundene
Netzwerk).
Wenn Sie die [Wi-Fi-Verbindung] auswählen, wird
eine Liste mit den verfügbaren Wi-Fi-Netzwerken
angezeigt. Wählen Sie das gewünschte Netzwerk
aus.
Bild
WI-FI-VERBINDUNG
Anschluss /
Ton
Sender
Anschluss
Allgemein
Verstecktes W-LAN hinzufügen
Über WPS-PBC verbinden
Sicherheit
Über WPS-PIN verbinden
www.lg.com
Erweiterte Wi-Fi-Einstellungen
Barrierefreiheit
Für kabellose AP (Router) mit dem Symbol
sen Sie den Sicherheitsschlüssel eingeben.
müs-
Behebung von Netzwerkproblemen
1 Drücken Sie zur Anzeige des EinstellungenMenüs die Taste (Einstellungen) auf der
Fernbedienung. Wählen Sie das Symbol
(
) [Alle Einstellungen] aus und bestätigen Sie es
durch Drücken der Taste Rad (OK) auf der
Fernbedienung.
Prüfen Sie den Router, oder wenden Sie sich an
Ihren Internetanbieter.
Wenn ein X neben dem Gateway erscheint:
( )
1 Trennen Sie das Stromkabel des AP (Router)
und versuchen Sie nach 5 Sekunden erneut
eine Verbindung herzustellen.
2 Setzen Sie den AP (Router) zurück.
Alle Einstellungen
2 Wählen [Anschluss] → [Drahtgebundene Verbindung (Ethernet)] oder [Wi-Fi-Verbindung] →
[Erweiterte Wi-Fi-Einstellungen].
Bild
ANSCHLUSS
Bild
WI-FI-VERBINDUNG
Anschluss /
Ton
Ton
Name des TV-Geräts
Sender
Drahtgebundene Verbindung (Ethernet)
Nicht verbunden
Anschluss
Sender
Wi-Fi-Verbindung

Anschluss
Nicht verbunden
Allgemein
Geräteanschluss
Allgemein
TV-Gerät per Mobilgerät einschalten
Sicherheit
Einstellungen für den Screen Share
Über WPS-PIN verbinden
Erweiterte Wi-Fi-Einstellungen
HDMI-Geräteeinstellungen
Barrierefreiheit
Verstecktes W-LAN hinzufügen
Über WPS-PBC verbinden
Sicherheit
Barrierefreiheit
Befolgen Sie je nach Netzwerkstatus die nachfolgenden Anweisungen.
Prüfen Sie das Fernsehgerät oder den
AP (Router).
Wenn ein X neben dem TV-Gerät erscheint:
1 Überprüfen Sie den Verbindungsstatus von
Fernsehgerät und AP (Router).
2 Schalten Sie das Fernsehgerät und den AP
(Router) aus und wieder ein.
3 Wenn Sie eine feste IP verwenden, geben Sie die
IP direkt ein.
4 Wenden Sie sich an Ihren Internetanbieter oder
den Hersteller des AP (Routers).
3 Wenden Sie sich an Ihren Internetanbieter oder
den Hersteller des AP (Routers).
Wenn ein X neben DNS erscheint:
1 Trennen Sie das Stromkabel des AP (Router)
und versuchen Sie nach 5 Sekunden erneut
eine Verbindung herzustellen.
2 Setzen Sie den AP (Router) zurück.
3 Prüfen Sie, ob die MAC-Adresse des
Fernsehgerätes/ AP (Router) bei Ihrem
Internetanbieter registriert ist. (Die MACAdresse, die im rechten Bereich des
Netzwerkstatusfensters angezeigt wird, muss
bei Ihrem Internetanbieter registriert sein.)
4 Prüfen Sie auf der Website des Routerherstellers,
ob die neueste Firmwareversion auf Ihrem AP
(Router) installiert ist.
SmartShare-Verbindung zum Smartphone
1 Prüfen Sie, ob auf Ihrem Smartphone Wi-Fi aktiviert ist. Zum Verwenden von SmartShare müssen
beide Geräte im gleichen lokalen Netzwerk eingebunden sein.
2 Installieren Sie die App zur Freigabe von Inhalten auf Ihrem Smartphone bzw. führen Sie diese App
aus (auf LG-Smartphones hat diese die Bezeichnung LG TV Plus).
3 Aktivieren Sie die Freigabe von Inhalten für andere Geräte auf Ihrem Smartphone.
4 Wählen Sie den Dateityp, den Sie abspielen möchten (Film, Audio oder Foto).
5 Wählen Sie eine Film-, Musik- oder Fotodatei aus, die Sie auf dem Fernsehgerät abspielen möchten.
6 Starten Sie die Mediendatei, um diese über Ihr Fernsehgerät abzuspielen.
Aktualisierung der TV-Firmware
* Wenn das Fernsehgerät nach der Auslieferung das erste Mal eingeschaltet wird, kann die Initialisierung
einige Minuten dauern.
1
(Einstellungen) →
(
[AUF UPDATES PRÜFEN]
) [Alle Einstellungen] →
[Allgemein] → [Info zu diesem TV-Gerät] →
2 Sie können die Softwareversion prüfen und aktualisieren.
Wenn Sie „[Automatische Updates zulassen]“ aktivieren, wird die Software automatisch aktualisiert.
Bild
Ton
Sender
ALLGEMEIN
AI-Dienst
Allgemein
Sicherheit
Barrierefreiheit
Allgemein /
Softwareversion
Standort
Timer
Kontoverwaltung
Eco-Modus
Info zu diesem TV-Gerät
Zusätzliche Einstellungen
INFO ZU DIESEM TV-GERÄT
Ton
Sprache
Zeit & Datum
Anschluss
Bild
Sender

Anschluss
Allgemein
Automatische Updates zulassen
AUF UPDATES PRÜFEN
TV-Informationen
Benachrichtigungen
Sicherheit
Barrierefreiheit
Benutzeranleitung
Schnellhilfe
Wenn es weiterhin zu Problemen kommt, wenden Sie sich bitte an den LG Kundendienst.
Guide de démarrage rapide SMART TV
* L'image affichée peut être différente de celle de votre téléviseur.
* L'image affichée sur un ordinateur ou un téléphone portable peut être différente selon le système d'exploitation.
* La position des icônes d'application peut varier sur la plateforme selon la version du logiciel que vous utilisez.
Paramètre Réseau
1 Appuyez sur le bouton (Paramètres) de
la télécommande pour accéder au menu
Paramètres. Mettez l'icône
( ) [Tous les
paramètres] en surbrillance et sélectionnezla en appuyant sur la Molette(OK) de la
télécommande.
4 Une fois la connexion effectuée, la mention
"[Connecté à Internet]" s'affiche à l'écran.
Image
CONNEXION
Son
Nom du téléviseur
Chaînes
Connexion filaire (Ethernet)
Non connecté
Connexion
Connexion Wi-Fi
Connecté à Internet
Général
Connectique de périphérique
TV Mobile activée
Sécurité
Accessibilité
( )
Paramètres Screen Share
Paramètres du périphérique HDMI
Tous les paramètres
2 Sélectionnez [Connexion] → [Connexion filaire
(Ethernet)] ou [Connexion Wi-Fi].
Vous pouvez vérifier l'état de la connexion dans
les [Paramètres Wi-Fi avancés].
Image
Image
Son
Chaînes
CONNEXION
Nom du téléviseur
Connexion filaire (Ethernet)
CONNEXION WI-FI
Connexion /
Son
Chaînes
Connexion
Non connecté
Connexion
Connexion Wi-Fi
Non connecté
Général
Connectique de périphérique
TV Mobile activée
Sécurité
Paramètres Screen Share
Général
Ajouter un réseau sans fil masqué
Connexion via WPS PBC
Sécurité
Connexion via WPS PIN
Paramètres Wi-Fi avancés
Accessibilité
Paramètres du périphérique HDMI
Accessibilité
3 Le périphérique essaye automatiquement de se
connecter au réseau disponible (prioritairement
au réseau filaire).
Lorsque vous sélectionnez [Connexion Wi-Fi], la
liste des réseaux s'affiche à l'écran. Sélectionnez
le réseau que vous souhaitez utiliser.
Image
CONNEXION WI-FI
Connexion /
Son
Chaînes
Connexion
Général
Ajouter un réseau sans fil masqué
Connexion via WPS PBC
Sécurité
Connexion via WPS PIN
Paramètres Wi-Fi avancés
Accessibilité
Pour connecter un routeur AP sans fil doté du symbole , vous devez saisir une clé de sécurité.
www.lg.com
Dépannage des problèmes de réseau
1 Appuyez sur le bouton (Paramètres) de
la télécommande pour accéder au menu
Paramètres. Mettez l'icône
( ) [Tous les
paramètres] en surbrillance et sélectionnezla en appuyant sur la Molette(OK) de la
télécommande.
Vérifiez l'état du routeur ou contactez votre
fournisseur de services Internet.
Lorsque X apparaît à côté de la passerelle:
( )
1 Débranchez le cordon d'alimentation du point
d'accès (routeur) patientez 5 secondes, puis
rebranchez-le.
2 Initialisez (Réglages usine) le point d'accès
(routeur).
Tous les paramètres
2 Sélectionnez [Connexion] → [Connexion filaire
(Ethernet)] ou [Connexion Wi-Fi] → [Paramètres
Wi-Fi avancés].
Image
CONNEXION
Image
CONNEXION WI-FI
Connexion /
Son
Son
Nom du téléviseur
Chaînes
Non connecté
Connexion
Connexion Wi-Fi

Connexion
Non connecté
Général
Connectique de périphérique
Général
TV Mobile activée
Sécurité
Paramètres Screen Share
Connexion via WPS PIN
Paramètres Wi-Fi avancés
Paramètres du périphérique HDMI
Accessibilité
Ajouter un réseau sans fil masqué
Connexion via WPS PBC
Sécurité
Lorsque X apparaît à côté de DNS:
1 Débranchez le cordon d'alimentation du point
d'accès (routeur) patientez 5 secondes, puis
rebranchez-le.
Chaînes
Connexion filaire (Ethernet)
3 Contactez votre fournisseur de services Internet
ou le fabriquant de votre routeur AP.
Accessibilité
Suivez les instructions ci-dessous en fonction de
l'état de votre réseau.
Vérifiez l'état de la TV ou du routeur.
Lorsque X apparaît à côté du téléviseur:
1 Vérifiez l'état de la connexion de la TV ou du
point d'accès (routeur).
2 Allumez puis éteignez la TV ou le point d'accès
(routeur).
3 Si vous utilisez une adresse IP statique, saisissezla directement.
4 Contactez votre fournisseur de services Internet
ou le fabriquant de votre routeur AP.
2 Initialisez (Réglages usine) le point d'accès
(routeur).
3 Vérifiez que l'adresse MAC de votre TV/du
routeur a bien été enregistrée auprès de votre
fournisseur de services Internet. (L'adresse
MAC est inscrite sur le panneau de droite de
la fenêtre de l'état du réseau et doit avoir été
enregistrée auprès de votre fournisseur de
services Internet.)
4 Consultez le site Web du fabricant de votre
routeur pour savoir si votre routeur bénéficie de
la dernière version du micrologiciel.
Connexion SmartShare pour smartphone
1 Vérifiez que la fonction Wi-Fi est activée sur votre smartphone. Pour utiliser SmartShare, les deux
périphériques doivent être connectés au même réseau local.
2 Installez/exécutez l'application de partage de contenus sur votre smartphone (fonction LG TV Plus sur
les téléphones LG).
3 Autorisez le partage de fichiers avec d'autres périphériques sur votre smartphone.
4 Sélectionnez le type de fichier que vous souhaitez lire (films, fichiers audio ou photos).
5 Sélectionnez un film, une musique ou une photo pour diffuser le fichier sur votre téléviseur.
6 Lancez la lecture du fichier multimédia sur votre téléviseur.
Mise à jour du micrologiciel de la TV
* Si le téléviseur est mis sous tension pour la première fois depuis son expédition depuis l’usine, l’initialisation peut prendre quelques minutes.
1
(Paramètres) →
( ) [Tous les paramètres] →
[Rechercher les mises à jour]
[Général] → [À propos de ce téléviseur] →
2 Vous pouvez vérifier la version du logiciel et la mettre à jour.
Si vous choisissez l'option "[Autoriser les mises à jour automatiques]", les mises à jour seront effectuées
automatiquement.
Image
Son
Chaînes
GÉNÉRAL
Service d'AI
Général
Sécurité
Accessibilité
Général /
Version logicielle
Lieu
Minuteurs
Gestion des comptes
Mode Éco
À propos de ce téléviseur
Paramètres supplémentaires
À PROPOS DE CE TÉLÉVISEUR
Son
Langue
Heure et date
Connexion
Image
Chaînes

Connexion
Général
Autoriser les mises à jour automatiques
RECHERCHER LES MISES À JOUR
Informations sur le téléviseur
Notifications
Sécurité
Accessibilité
Guide de l'utilisateur
Aide rapide
Veuillez appeler le service clientèle de LG en cas de problème.
SMART TV - Guida alla configurazione rapida
* L’immagine mostrata può risultare differente rispetto alla TV in uso.
* L'immagine mostrata su un PC o su un cellulare può variare a seconda del sistema operativo.
* A seconda della versione del software, la posizione dell'icona App può variare sulla piattaforma.
Impostazione Rete
4 Al termine della connessione, viene visualizzato
il messaggio "[Connesso a Internet]".
1 Premere il pulsante (Impostazioni) sul
telecomando per accedere al menu delle
impostazioni. Evidenziare l'icona
( ) [Tutte
le impostazioni] e selezionarla premendo il
pulsante la Rotella (OK) sul telecomando.
Immagine
CONNESSIONE
Audio
Nome TV
Canali
Connessione cablata (Ethernet)
Non connesso
Connessione
Connessione Wi-Fi
Connesso a Internet
Generale
Connettore dispositivo
Mobile TV attivo
Sicurezza
( )
Accessibilità
Impostazioni Screen Share
Impostazioni dispositivo HDMI
Tutte le impostazioni
È possibile verificare lo stato della connessione
in [Impostazioni Wi-Fi avanzate].
2 Selezionare [Connessione] → [Connessione
cablata (Ethernet)] o [Connessione Wi-Fi].
Immagine
Audio
Canali
Immagine
CONNESSIONE
Connessione /
Nome TV
Canali
Connessione cablata (Ethernet)
Non connesso
Connessione
Connessione
Connessione Wi-Fi
Non connesso
Generale
Generale
Connettore dispositivo
Aggiungere una rete wireless nascosta
Connetti tramite WPS PBC
Mobile TV attivo
Sicurezza
CONNESSIONE WI-FI
Audio
Sicurezza
Impostazioni Screen Share
Connetti tramite PIN WPS
Impostazioni Wi-Fi avanzate
Impostazioni dispositivo HDMI
Accessibilità
Accessibilità
3 Il dispositivo tenta automaticamente la connessione alla rete disponibile (prima alla rete
cablata).
Quando si seleziona la [Connessione Wi-Fi],
viene visualizzato l'elenco delle reti disponibili.
Scegliere la rete che si desidera utilizzare.
Immagine
CONNESSIONE WI-FI
Connessione /
Audio
Canali
Connessione
Generale
Aggiungere una rete wireless nascosta
Connetti tramite WPS PBC
Sicurezza
Connetti tramite PIN WPS
Impostazioni Wi-Fi avanzate
www.lg.com
Accessibilità
Per l'AP wireless (router) che presenta il simbolo
è necessario immettere la chiave di protezione.
,
Risoluzione dei problemi relativi alla rete
1 Premere il pulsante (Impostazioni) sul
telecomando per accedere al menu delle
impostazioni. Evidenziare l'icona
( ) [Tutte
le impostazioni] e selezionarla premendo il
pulsante la Rotella (OK) sul telecomando.
Controllare il router oppure consultare il proprio
provider di servizi Internet.
Se appare una X accanto al Gateway:
( )
1 Scollegare il cavo di alimentazione dell'AP
(router) e provare a connettersi nuovamente
dopo 5 secondi.
Tutte le impostazioni
2 Inizializzare (Reset) l'AP (Router).
2 Selezionare [Connessione] → [Connessione
cablata (Ethernet)] o [Connessione Wi-Fi] →
[Impostazioni Wi-Fi avanzate].
Immagine
CONNESSIONE
Immagine
CONNESSIONE WI-FI
Connessione /
Audio
Audio
Se appare una X accanto alla DNS:
Nome TV
Canali
Connessione
Canali
Connessione cablata (Ethernet)
Non connesso
Connessione Wi-Fi

Connessione
Non connesso
Generale
Connettore dispositivo
Generale
Mobile TV attivo
Sicurezza
Impostazioni Screen Share
Aggiungere una rete wireless nascosta
Connetti tramite WPS PBC
Sicurezza
Connetti tramite PIN WPS
Impostazioni Wi-Fi avanzate
Impostazioni dispositivo HDMI
Accessibilità
3 Contattare il provider di servizi Internet o le
società dell'AP (Router).
Accessibilità
Attenersi alle istruzioni riportate di seguito relative
allo stato della rete.
Controllare il TV o l'AP (router).
1 Scollegare il cavo di alimentazione dell'AP
(router) e provare a connettersi nuovamente
dopo 5 secondi.
2 Inizializzare (Reset) l'AP (Router).
3 Verificare che l'indirizzo MAC della TV o del
router sia registrato presso il proprio provider di
servizi Internet. (L’indirizzo MAC visualizzato nel
riquadro di destra della finestra dello stato della
rete deve essere registrato presso il proprio
provider di servizi Internet.)
4 Controllare il sito Web del produttore per
assicurarsi che sul router sia installata la
versione più recente del firmware.
Se appare una X accanto al TV:
1 Verificare lo stato della connessione del TV, AP
(Router).
2 Spegnere e accendere il TV, AP (Router).
3 Se si utilizza un IP statico, immetterlo
direttamente.
4 Contattare il provider di servizi Internet o le
società dell'AP (Router).
Connessione SmartShare allo smartphone
1 Verificare che sullo smartphone sia attivato il Wi-Fi. Per utilizzare SmartShare, entrambi i dispositivi si
devono trovare sulla stessa rete locale.
2 Sullo smartphone, installare/eseguire l'applicazione per la condivisione dei contenuti (sui cellulari LG
tale applicazione si chiama LG TV Plus).
3 Consentire allo smartphone di condividere file di contenuto con altri dispositivi.
4 Selezionare il tipo di file che si desidera riprodurre (filmato, audio o foto).
5 Selezionare un file di filmato, musica o foto da riprodurre sul TV.
6 Riprodurre il file multimediale e visualizzarlo sul TV.
Aggiornamento firmware TV
* Se il televisore viene acceso per la prima volta dopo essere stato spedito dalla fabbrica, l’inizializzazione
potrebbe richiedere alcuni minuti.
1
(Impostazioni) →
( ) [Tutte le impostazioni] →
TROLLA AGGIORNAMENTI]
[Generale] → [Informazioni sulla TV] → [CON-
2 È possibile controllare la versione del software e aggiornarla.
Se si seleziona l'opzione "[Consentire gli aggiornamenti automatici]" il software viene aggiornato automaticamente.
Immagine
Audio
Canali
GENERALE
Servizio AI
Generale
Sicurezza
Accessibilità
Generale /
Versione software
Posizione
Timer
Gestione account
Modalità Eco
Informazioni sulla TV
Impostazioni aggiuntive
INFORMAZIONI SULLA TV
Audio
Lingua
Ora e data
Connessione
Immagine
Canali

Connessione
Generale
Consentire gli aggiornamenti automatici
CONTROLLA AGGIORNAMENTI
Informazioni TV
Notifiche
Sicurezza
Accessibilità
Manuale d'uso
Assistenza rapida
Chiamare il servizio clienti LG se si verificano problemi.
Guía de instalación rápida de SMART TV
* La imagen mostrada puede ser diferente a la que aparece en la TV.
* La imagen mostrada en un PC o teléfono móvil puede variar en función del SO (sistema operativo).
* Las posiciones de los iconos de las aplicaciones pueden variar en la plataforma, dependiendo de la versión del software.
CONFIGURACIÓN DE RED
1 Pulse el botón (Configuración) del
mando a distancia para acceder al menú de
configuración. Resalte el icono
( ) [Toda la
configuración] selecciónelo pulsando el botón
Rueda (OK) del mando a distancia.
4 Si la conexión tiene éxito, se muestra el estado
"[Conectado a Internet]".
Imagen
CONEXIÓN
Sonido
Nombre TV
Canales
Conexión cableada (Ethernet)
No conectado
Conexión
Conexión Wi-Fi
Conectado a Internet
General
Conector de dispositivo
TV Móvil activada
Seguridad
( )
Accesibilidad
Configuración de Screen Share
Configuración de dispositivo HDMI
Toda la configuración
2 Seleccione [Conexión] → [Conexión cableada
(Ethernet)] o [Conexión Wi-Fi].
Imagen
Sonido
Canales
CONEXIÓN
Nombre TV
Imagen
Sonido
Conexión
Conexión Wi-Fi
Conector de dispositivo
TV Móvil activada
Seguridad
Conexión /
Canales
No conectado
General
CONEXIÓN WI-FI
Conexión cableada (Ethernet)
No conectado
Conexión
Puede comprobar el estado de la conexión en
[Configuración Wi-Fi avanzada].
Configuración de Screen Share
Configuración de dispositivo HDMI
Accesibilidad
General
Agregar una red inalámbrica oculta
Conectarse a través de WPS PBC
Seguridad
Conectarse a través de WPS PIN
Configuración Wi-Fi avanzada
Accesibilidad
3 El dispositivo intenta conectarse automáticamente a la red disponible (a la red con cables
primero).
Cuando seleccione la [Conexión Wi-Fi], se
mostrará la lista de Conexiónes disponibles.
Seleccione la red que desea utilizar.
Imagen
Sonido
CONEXIÓN WI-FI
Conexión /
Canales
Conexión
General
Agregar una red inalámbrica oculta
Conectarse a través de WPS PBC
Seguridad
Conectarse a través de WPS PIN
Configuración Wi-Fi avanzada
Accesibilidad
Para los AP (routers) inalámbricos que tienen el
símbolo , debe introducir la clave de seguridad.
www.lg.com
Solución de problemas de red
1 Pulse el botón (Configuración) del
mando a distancia para acceder al menú de
configuración. Resalte el icono
( ) [Toda la
configuración] selecciónelo pulsando el botón
Rueda (OK) del mando a distancia.
Compruebe el router o consulte con su proveedor de servicios de Internet.
Si aparece una X al lado de la puerta de enlace:
( )
1 Desenchufe el cable de alimentación del AP
(router) e intente conectar de nuevo cuando
transcurran 5 segundos.
Toda la configuración
2 Inicialice (Reajuste) el AP (router).
2 Seleccione [Conexión] → [Conexión cableada
(Ethernet)] o [Conexión Wi-Fi] → [Configuración
Wi-Fi avanzada].
Imagen
CONEXIÓN
Imagen
Sonido
Sonido
CONEXIÓN WI-FI
Conexión /
Si aparece una X al lado de DNS:
Nombre TV
Canales
No conectado
Conexión
Canales
Conexión cableada (Ethernet)
Conexión Wi-Fi

Conexión
No conectado
General
Conector de dispositivo
General
TV Móvil activada
Seguridad
Configuración de Screen Share
Conectarse a través de WPS PIN
Configuración Wi-Fi avanzada
Configuración de dispositivo HDMI
Accesibilidad
Agregar una red inalámbrica oculta
Conectarse a través de WPS PBC
Seguridad
3 Póngase en contacto con su proveedor de
Internet o del AP (router).
Accesibilidad
Siga las instrucciones indicadas a continuación que
establecen el estado de la red.
Compruebe la TV o el AP (router).
1 Desenchufe el cable de alimentación del AP
(router) e intente conectar de nuevo cuando
transcurran 5 segundos.
2 Inicialice (Reajuste) el AP (router).
3 Compruebe que la dirección MAC de la TV/
router está registrada con su proveedor
de servicios de Internet. (La dirección MAC
mostrada en el panel derecho de la ventana
de estado de red se debe registrar con su
proveedor de servicios de Internet.)
4 Compruebe el sitio web del fabricante del
router para asegurarse de que su router tiene la
versión más reciente de firmware instalada.
Si aparece una X al lado de la TV:
1 Compruebe el estado de la conexión del
televisor y el AP (router).
2 Apague y encienda el televisor y el AP (router).
3 Si utiliza una IP estática, introdúzcala.
4 Póngase en contacto con su proveedor de
Internet o del AP (router).
Conexión mediante Smartshare con un Smartphone
1 Compruebe que la red Wi-Fi está habilitada en su teléfono inteligente. Para usar SmartShare, ambos
dispositivos deben estar conectados a la misma red local.
2 Instale/ejecute la aplicación de contenido compartido en su teléfono inteligente (denominada LG TV
Plus en los teléfonos LG).
3 Habilite su teléfono inteligente para compartir archivos de contenido con otros dispositivos.
4 Seleccione el tipo de archivo que desea reproducir (película, audio o foto).
5 Seleccione un archivo de película, música o foto para reproducirlo en la TV.
6 Reproduzca el archivo multimedia para verlo y disfrutarlo en la TV.
Actualización del firmware de la TV
* La primera vez que se encienda la TV tras su envío, puede tardar unos minutos en iniciarse.
1
(Configuración) →
ACTUALIZACIONES]
(
) [Toda la configuración] →
[General] → [Acerca de esta TV] → [BUSCAR
2 Puede comprobar la versión de software y actualizarla.
Si marca la opción "[Permitir actualizaciones automáticas]", el software se actualizará automáticamente.
Imagen
Sonido
Canales
GENERAL
Servicio AI
General
Seguridad
Accesibilidad
General /
Versión de software
Ubicación
Temporizadores
Administración de cuenta
Modo Eco
Acerca de esta TV
Configuración adicional
ACERCA DE ESTA TV
Sonido
Idioma
Fecha y hora
Conexión
Imagen
Canales

Conexión
General
Permitir actualizaciones automáticas
BUSCAR ACTUALIZACIONES
Información de TV
Notificaciones
Seguridad
Accesibilidad
Guía del usuario
Ayuda rápida
Llame al centro de atención al cliente de LG si experimenta algún problema.
Ghid rapid de instalare SMART TV
* Imaginea ilustrată poate fi diferită de televizorul dvs.
* Imaginea ilustrată pe un PC sau pe un telefon mobil poate varia în funcţie de SO (Sistemul de Operare).
* Poziţiile pictogramei aplicaţiei pot varia pe platformă, în funcţie de versiunea de software.
Setări pentru reţea
1 Apăsaţi (Setări) de pe telecomandă pentru a
accesa meniul de setări. Evidenţiaţi pictograma
( ) [Toate setările] şi selectaţi apăsând
butonul Disc (OK) de pe telecomandă.
4 În cazul în care conexiunea se realizează cu succes, este afişată reţeaua „[Conectat la internet]”.
Imagine
CONEXIUNE
Sunet
Nume TV
Canale
Conexiune cu fir (Ethernet)
Neconectat
Conexiune
Conexiune Wi-Fi
Conectat la internet
General
Conector dispozitiv
Mobile TV pornit
( )
Siguranţă
Toate setările
2 Selectaţi [Conexiune] → [Conexiune cu fir
(Ethernet)] sau [Conexiune Wi-Fi].
Imagine
Sunet
Canale
CONEXIUNE
Nume TV
Conexiune cu fir (Ethernet)
Neconectat
Conexiune
Setări dispozitiv HDMI
Puteţi verifica starea conexiunii în [Setări Wi-Fi
avansate].
Imagine
CONEXIUNE WI-FI
Conexiune /
Sunet
Canale
Conexiune
Conector dispozitiv
Mobile TV pornit
Siguranţă
Setări Screen Share
Conexiune Wi-Fi
Neconectat
General
Accesibilitate
General
Setări dispozitiv HDMI
Adăugaţi o reţea fără fir ascunsă
Conectare prin intermediul WPS PBC
Setări Screen Share
Siguranţă
Conectare prin intermediul PIN WPS
Setări Wi-Fi avansate
Accesibilitate
Accesibilitate
3 Dispozitivul încearcă automat să se conecteze la
reţeaua disponibilă (mai întâi la reţeaua cu fir).
Când selectaţi [Conexiune Wi-Fi], este afişată
lista de reţele disponibilă. Alegeţi reţeaua pe
care doriţi să o utilizaţi.
Imagine
CONEXIUNE WI-FI
Conexiune /
Sunet
Canale
Conexiune
General
Adăugaţi o reţea fără fir ascunsă
Conectare prin intermediul WPS PBC
Siguranţă
Conectare prin intermediul PIN WPS
Setări Wi-Fi avansate
Accesibilitate
Pentru punctul de acces fără fir (router) care are
simbolul , trebuie să introduceţi cheia de securitate.
www.lg.com
Depanarea problemelor de reţea
1 Apăsaţi (Setări) de pe telecomandă pentru a
accesa meniul de setări. Evidenţiaţi pictograma
( ) [Toate setările] şi selectaţi apăsând
butonul Disc (OK) de pe telecomandă.
Verificaţi punctul de acces (router) sau consultaţi
furnizorul dvs. pentru servicii de internet.
Când X apare în dreptul Gateway:
( )
1 Scoateţi din priză cablul de alimentare al
punctului de acces (router) şi încercaţi
conectarea după 5 secunde.
Toate setările
2 Selectaţi [Conexiune] → [Conexiune cu fir
(Ethernet)] sau [Conexiune Wi-Fi] → [Setări Wi-Fi
avansate].
Imagine
CONEXIUNE
Imagine
2 Iniţializaţi (resetaţi) punctul de acces (router).
3 Contactaţi furnizorul de servicii de internet sau
compania pentru punctul de acces (router).
CONEXIUNE WI-FI
Conexiune /
Sunet
Sunet
Nume TV
Canale
Conexiune Wi-Fi
Când X apare în dreptul DNS:
Canale
Conexiune cu fir (Ethernet)
Neconectat
Conexiune

Conexiune
Neconectat
General
Conector dispozitiv
General
Mobile TV pornit
Siguranţă
Setări Screen Share
Conectare prin intermediul WPS PBC
Siguranţă
Conectare prin intermediul PIN WPS
Setări Wi-Fi avansate
Setări dispozitiv HDMI
Accesibilitate
Adăugaţi o reţea fără fir ascunsă
Accesibilitate
Urmaţi instrucţiunile de mai jos care sunt corelate
cu starea reţelei dvs.
Verificaţi televizorul sau punctul de acces (router).
Când X apare în dreptul televizorului:
1 Verificaţi starea conexiunii televizorului, punctul
de acces (router).
2 Opriţi şi porniţi televizorul, punctul de acces
(router).
3 Dacă utilizaţi un IP static, introduceţi IP-ul direct.
4 Contactaţi furnizorul de servicii de internet sau
compania pentru punctul de acces (router).
1 Scoateţi din priză cablul de alimentare al
punctului de acces (router) şi încercaţi
conectarea după 5 secunde.
2 Iniţializaţi (resetaţi) punctul de acces (router).
3 Verificaţi ca adresa MAC a televizorului/punctului
de acces (router) să fie înregistrată la furnizorul
dvs. de servicii de internet. (Adresa MAC afişată
pe panoul din dreapta al ferestrei cu starea
reţelei trebuie să fie înregistrată la furnizorul de
servicii de internet.)
4 Verificaţi site-ul web al producătorului punctului
de acces (router) pentru a vă asigura că routerul
dvs. are cea mai recentă versiune instalată.
Conectarea SmartShare la smartphone
1 Asiguraţi-vă că funcţia Wi-Fi este activată pe smartphone-ul dvs. Pentru a utiliza SmartShare, ambele
dispozitive trebuie să fie conectate la aceeaşi reţea locală.
2 Instalaţi/rulaţi aplicaţia pentru partajare de conţinut pe smartphone (Se numeşte LG TV Plus pe telefoanele LG).
3 Activaţi smartphone-ul pentru a partaja fişiere cu diferite conţinuturi cu alte dispozitive.
4 Selectaţi tipul de fişier pe care doriţi să-l redaţi (video, audio sau fotografii).
5 Selectaţi fişierul video, de muzică sau fotografii care va fi redat pe televizor.
6 Redaţi fişierul media pentru a-l vizualiza şi a vă bucura de el pe televizor.
Actualizarea firmware-ului televizorului
* Dacă televizorul este pornit pentru prima dată după livrarea din fabrică, iniţializarea acestuia poate dura
câteva minute.
1
(Setări) →
(
) [Toate setările] →
[General] → [Despre acest TV] → [VERIFICAȚI ACTUALIZĂRILE]
2 După verificarea versiunii software-ului, actualizaţi-l.
Dacă bifaţi „[Permite actualizările automate]”, puteţi actualiza software-ul automat.
Imagine
Sunet
Canale
GENERAL
Serviciu AI
General
Siguranţă
Accesibilitate
General /
Versiune de software
Locaţie
Temporizatoare
Gestionare cont
Modul Eco
Despre acest TV
Setări suplimentare
DESPRE ACEST TV
Sunet
Limba
Ora şi data
Conexiune
Imagine
Canale

Conexiune
General
Permite actualizările automate
VERIFICAȚI ACTUALIZĂRILE
Informaţii TV
Notificări
Siguranţă
Accesibilitate
Manual de utilizare
Ajutor rapid
Apelaţi centrul de service pentru clienţi LG dacă întâmpinaţi probleme.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising