LG | HF65LSR | User manual | LG HF65LSR Gebruikershandleiding

LG HF65LSR Gebruikershandleiding
OWNER'S MANUAL
LG CineBeam
DLP Projector
Please read the safety information carefully before using this product.
HF65LS
HF65LSR
www.lg.com
P/NO : SAC37813516 (1901-REV00)
Copyright © 2019 LG Electronics Inc. All Rights Reserved.
2
LICENSES
Supported licenses may differ by model. For more information about licenses, visit
www.lg.com.
ENGLISH
The terms HDMI and HDMI High-Definition
Multimedia Interface, and the HDMI Logo are
trademarks or registered trademarks of HDMI
Licensing Administrator, Inc. in the United States
and other countries.
Manufactured under license from Dolby Laboratories. Dolby, Dolby Vision, Dolby Audio,
Dolby Atmos, and the double-D symbol are trademarks of Dolby Laboratories.
For DTS patents, see http://patents.dts.com. Manufactured under license from
DTS Licensing Limited. DTS, the Symbol, & DTS and the Symbol together, DTS 2.0
Channel, DTS 2.0+Digital Out, DTS-HD, and DTS Virtual:X are registered trademarks
or trademarks of DTS, Inc. in the United States and/or other countries. © DTS, Inc. All
Rights Reserved.
NOTE
• Images shown in this manual may differ from your projector.
• Your projector’s OSD (On Screen Display) may differ slightly from that shown in
this manual.
3
SAFETY PRECAUTIONS
WARNING/CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The lightning flash with
arrowhead symbol, within an
equilateral triangle, is intended
to alert the user to the presence of
uninsulated dangerous voltage within
the product’s enclosure that may be of
sufficient magnitude to constitute a risk
of electric shock to persons.
The exclamation point within
an equilateral triangle is
intended to alert the user to
the presence of important operating
and maintenance (servicing) instructions
in the literature accompanying the
appliance.
WARNING/CAUTION
-- TO REDUCE THE RISK OF FIRE
AND ELECTRIC SHOCK, DO NOT
EXPOSE THIS PRODUCT TO RAIN
OR MOISTURE.
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Indoor Installation
WARNING
• Do not use the projector outside
and do not expose the product to
any humidity or water.
-- Since the product is not
waterproof, this may result in a
fire or electric shock.
• Do not place the projector in direct
sunlight or near heat sources such
as radiators, fires, stoves, etc.
-- This may result in fire.
ENGLISH
Please take note of the safety instructions to prevent any potential accident or misuse
of the projector.
Child injuries can be prevented by following these simple safety precautions.
The precautions should be followed in the same manner when you store or move your
existing projector.
• Safety precautions are given in two forms, i.e., WARNING and CAUTION as
detailed below.
WARNING Failure to follow the instructions may cause serious injury and
even death.
CAUTION Failure to follow the instructions may cause personal injury or
product damage.
• Read the owner’s manual carefully and keep it on hand.
4
ENGLISH
• Do not place flammable materials
such as aerosols near the projector.
-- This may result in fire.
• Do not allow children to cling to or
climb up to the projector.
-- This may cause the projector to
fall, causing injury or death.
• Do not install the product in a
place with no ventilation (e.g., on
a bookshelf or in a closet) or on a
carpet or cushion.
-- This may result in fire due to the
increase in internal temperature.
• Do not place the product close to
sources of steam, oil or oil mist,
such as humidifiers and kitchen
counters.
-- Failure to do so may result in
fire, electric shock, or corrosion.
• Do not install the product onto
a wall or ceiling that is close to
sources of oil or oil mist.
-- The product may be damaged
and fall, resulting in serious
injury.
• Do not place the projector where it
might be exposed to dust.
-- This may result in fire.
• Do not use the projector in a damp
place such as a bathroom where it
is likely to get wet.
-- This may result in fire or electric
shock.
• Do not allow a tablecloth or curtain
to block the air vent.
-- This may result in fire due to
the increase in the internal
temperature.
• Ensure good ventilation around the
projector. The distance between the
projector and the wall should be at
least 30 cm.
-- This will prevent fire due to
the increase in the internal
temperature.
• When installing the product on a
ceiling, a professional technician
should install it using authorized
tools. If installed improperly, the
product may fall.
-- This may cause personal injury
or property damage. For
installation of the product,
please contact the customer
support center.
• If you use a ceiling mounting device,
adhesive to prevent loosening
of screws, or if you apply oil or
lubricant to the product, this may
cause the case to crack and the
product to fall. This may also cause
serious personal injury to the
person below the device (if any) and
damage to the product as well.
5
CAUTION
WARNING
• DISCONNECTING THE DEVICE
FROM THE MAIN POWER
-- The Power plug is the
disconnecting device. In case of
an emergency, the Power Plug
must remain readily accessible.
• The grounding wire should be
connected. (Except for devices
which are not grounded.)
-- Ensure that you connect the
grounding cable to avoid electric
shock. If it is not possible to
ground the unit, have a qualified
electrician install a separate
circuit breaker.
Do not try to ground the
projector by connecting it to
telephone wires, lightning rods
or gas pipes.
• The power plug should be inserted
fully into the power outlet.
-- An unstable connection may
cause a fire.
• Do not place heavy objects on the
power cord.
-- This may result in fire or electric
shock.
• Never touch the power plug with
wet hands.
-- This may result in electric shock.
ENGLISH
• When placing the projector on a
table or shelf, be careful not to put
it near the edge.
-- The projector could fall due to
balance problems, which may
cause personal injury or damage
to the product. Make sure to use
the projector cabinet or stand
that fits the projector.
• When moving the projector, make
sure to switch it off and remove the
power plug and cords.
-- The power cord may be
damaged, resulting in fire or
electric shock.
• Do not place the projector on an
unstable or vibrating surface such
as a wobbly shelf or a slope.
-- It may fall and cause injury.
• Be careful not to tip the projector
over when connecting external
devices to the projector.
-- This may cause personal injury
or damage to the projector.
Power
6
ENGLISH
• Do not plug too many devices into
one multi-power outlet.
-- This may result in fire due to the
power outlet overheating.
• Keep the AC adapter, power plug,
and the used power outlet clean
from dust or foreign materials
building up.
-- This may result in fire.
• If there is any smoke or a burning
smell from the projector or AC
adapter, stop using the product
immediately. Disconnect the power
cord from the power outlet, and
then contact the customer service
center.
-- This may result in fire.
• To turn off the main power, remove
the power plug, which should be
positioned so it is easy to access for
operation.
CAUTION
• Always grab the plug to remove the
AC adapter or power cord.
-- Otherwise, this may result in a
fire or may damage the product.
• Refrain from constantly bending the
power cord of the AC adapter.
-- If the power cord is bent
excessively for a long period
of time, the cord may break
inside. This may result in a fire or
electric shock.
• Ensure the power cord and plug are
not damaged, modified, severely
bent, twisted, pulled, sandwiched or
hot. Do not use the product if the
power outlet is loose.
-- This may result in fire or electric
shock.
• Keep the power cord away from
heating devices.
-- The wire’s sheath may melt,
which may result in fire or
electric shock.
• Place the projector where people
will not trip over or step on the
power cord to protect the power
cord and plug from any damage.
-- This may result in fire or electric
shock.
7
• The surface of the AC adapter is
hot. Keep the AC adapter out of the
reach of children and avoid touching
it during use.
• Never disassemble the power
supply devices (AC adapter/power
cord, etc.).
-- This may damage the power
cord and result in a fire or
electric shock.
• Connect the AC adapter and the
power cord firmly.
-- Not doing so may result in a
product failure or fire.
• Do not place heavy objects or put
pressure on the power cord and AC
adapter and avoid damage.
-- This may result in a fire or may
damage the product.
• Always use the AC adapter provided
or any AC adapters approved and
certified by LG Electronics.
-- Any other AC adapter
connected may result in the
screen flickering.
ENGLISH
• Do not turn the projector on or
off by plugging in the power plug
or unplugging it from the power
outlet. (Do not use the power plug
as a switch.)
-- This may result in electric shock
or damage to the product.
• Do not insert a conductor into the
other side of the wall outlet while
the power plug is inserted into the
wall outlet. In addition, do not touch
the power plug immediately after
it is disconnected from the wall
outlet.
-- This may result in electric shock.
• Only use the official power cord
provided by LG Electronics. Do not
use other power cords.
-- This may result in fire or electric
shock.
• If any water or foreign materials
have gone into the AC adapter,
power cord, or the interior of the
projector, turn off the projector by
pressing the power button. Remove
all the cables, and then contact the
customer service center.
-- This may result in fire or electric
shock.
8
When in Use
WARNING
ENGLISH
• Do not place anything containing
liquid on top of the projector
such as a vase, flower pot, cup,
cosmetics, medicine, or ornaments,
candles, etc.
-- This may result in fire or electric
shock, or cause injury due to
falling.
• In the event that there is a heavy
impact or the cabinet is damaged,
switch it off, unplug it from the
power outlet and contact an
authorized service center.
-- This may result in electric shock.
• Do not insert pieces of metal such
as coins, hairpins or metal debris,
nor flammable materials such as
paper or matches into the projector.
-- This is to prevent electric shock
or fire.
• Make sure that a child does not
swallow the batteries when you
replace the old batteries in the
remote control with new ones. Keep
batteries out of reach of children.
-- If a child swallows a battery,
consult a doctor immediately.
• Never open any cover on the
projector.
-- There is a high risk of electric
shock.
• Do not look directly into the lens
when the projector is in use.
-- The bright light may damage
your eyes.
• When the lamp is on or has just
been turned off, avoid touching the
air vent or lamp, because these will
be very hot.
• If there is a gas leak in the room
with the projector, do not touch the
projector or power outlet. Open the
windows for ventilation.
-- Sparks may cause fire or burns.
• Unplug the power cord from the
outlet during a lightning storm.
-- This will prevent shock or
damage to the projector.
• Do not use the projector near
electronic devices that generate a
strong magnetic field.
• Keep the plastic film used for
packaging the projector out of the
reach of children.
-- If not handled safely, it can
cause suffocation.
9
CAUTION
• Do not place heavy objects on the
projector.
-- It may fall down and cause
personal injury.
• Be careful not to allow any impact
to the lens during transport.
• Do not touch the lens of the
projector.
-- The lens may be damaged.
• Do not use any sharp tools on
the projector such as a knife or
hammer, because this may damage
the casing.
• In the event that no image appears
on the screen or no sound is heard,
stop using the projector. Switch
off the projector, unplug it from
the power outlet and contact our
service center.
-- This may result in fire or electric
shock.
• Do not drop anything onto the
projector or allow anything to bang
into the projector.
-- This may cause damage to the
projector or personal injury.
ENGLISH
• Do not keep your hand on the
projector for a long time when it is
running.
• When you play a game by
connecting a game console to a
projector, it is recommended that
you maintain a distance of more
than four times the diagonal length
of the screen.
-- Make sure that the connecting
cable is long enough. Otherwise,
the product may fall causing
personal injury or damage to the
product.
• Do not place the projector or its
remote control with batteries in
an extremely high temperature
environment.
-- This may result in fire.
10
ENGLISH
• It is recommended that you
maintain a distance of more than
5 to 7 times the diagonal length of
the screen.
-- If you watch the screen at a
close distance for a long time,
your eyesight may become
worse.
• Do not block the light beam emitted
from the projector using a book or
other object.
-- Lengthy exposure to the
projector beam may result in
fire. In addition, the lens may
be overheated and damaged by
the reflected heat. Disable the
AV function to stop projection
temporarily or turn off the
power.
• Do not start the projector with the
volume turned up high.
-- High volume may damage
hearing.
• Do not use high voltage electrical
equipment near the projector, (e.g.,
a bug zapper). This may result in
product malfunction.
Cleaning
WARNING
• Do not spray the projector with
water when cleaning. Make sure
water does not flow into the
projector.
-- This may result in fire or electric
shock.
• When there is smoke or a strange
smell coming out from the projector
or a foreign object falls into the
projector, please switch it off and
unplug it from the power outlet and
contact our service center.
-- Otherwise, this may result in fire
or electric shock.
11
CAUTION
ENGLISH
• Contact your seller or our service
center once a year to clean the
internal parts of the projector.
-- If you do not clean the projector
for a long period of time, dust
will accumulate, which may
result in fire or damage to the
projector.
• When cleaning plastic parts such
as the projector case, unplug the
power first and wipe with a soft
cloth. Do not spray with water
or wipe with a wet cloth. Never
use glass cleaner, automobile or
industrial polish, abrasives, wax,
benzene, or alcohol as these can
damage the projector.
-- This can result in fire, electric
shock or cause damage to
the product (deformation and
corrosion).
• Do not wipe the optical system
(lens, mirror) right after the product
has been turned off or while the
product is being operated. When
cleaning each part of the product,
remove the power cord and wipe
gently with a soft cloth. Do not
spray with water or wipe with a
wet cloth. Do not use detergents,
automobile or industrial polish,
abrasive substances, wax, benzene,
alcohol, water, etc. on the product’s
main unit or optical system (lens,
mirror) as this may damage the
product.
-- This can result in fire, electric
shock or cause damage to
the product (deformation and
corrosion).
• Remove the plug from the outlet
before cleaning the product.
-- Otherwise, this may result in
electric shock.
12
Others
WARNING
ENGLISH
• When you go out, place the
projector out of reach of animals,
and remove the power plug from
the wall outlet.
-- Using a damaged power cord
may result in short circuit or fire.
• Do not use the projector near highprecision electronic devices or those
that transmit weak radio signal.
-- This may affect the operation of
the product, causing an accident.
• Only a qualified technician can
disassemble or modify the
projector. For diagnosis, adjustment,
or repair, contact your seller or our
service center.
-- This may result in fire or electric
shock.
• Proper ventilation required, do not
block airflow around unit. Doing
so can cause injury and internal
overheating.
• Do not touch the lens; doing so can
result in burns or damage to the
lens. The lens and the unit may be
HOT during and immediately after
use. Use caution when handling
the unit, allowing for a proper cool
down.
• Only use a grounded electrical
outlet. (Except for devices which
are not grounded.)
• Do not insert anything into or cover
up the exhaust vents.
-- This may result in fire or electric
shock.
• Follow all maintenance guidelines
for optimal use; service only at an
authorized service center.
• Keep the batteries and remote out
of reach of children.
-- This will prevent personal injury
or damage to the product.
13
CAUTION
Risk Group 2
CAUTION Possibly hazardous optical radiation
emitted from this product. Do not stare at
operating lamp. May be harmful to the eye.
This label is attached to the bottom of
the product and language may differ.
ENGLISH
• Do not use or store the projector
outdoors for long periods of time.
• Do not mix new batteries with old
ones.
-- Burst or leaking batteries may
result in damage or injury.
• Be sure to unplug if the projector is
not to be used for a long period.
-- Accumulated dust may result
in fire or electric shock due to
overheating, ignition, or poor
insulation.
• Only use the specified type of
battery.
-- Burst or leaking batteries may
result in damage or injury.
• Make sure you use the same type
of battery when replacing.
-- In the case of a battery contact
failure, the battery may drain
quickly or the remote control
may not work properly.
• Dispose of used batteries properly.
-- This may result in explosion
or fire. The correct method of
disposal may vary depending
on your country or region.
Dispose of the battery pack as
instructed.
• Do not throw or disassemble the
battery.
-- This may result in fire or
explosion due to damage to the
battery.
• Store batteries away from metallic
objects, such as keys and paper
clips.
-- Excess current may cause a
rapid increase in temperature,
resulting in fire or burns.
• Do not store the batteries near any
heat source, such as a heater.
-- This may result in fire or damage
to the product.
• Do not store batteries at
temperatures higher than 60 °C or
in high humidity.
-- This may result in explosion
or fire.
• Make sure that the battery is
installed correctly.
-- This prevent explosion or fire.
• Incorrect battery replacement may
cause fire.
• Batteries: Store the accessories
(battery, etc.) in a safe location out
of the reach of children.
14
CONTENTS
LICENSES
ENGLISH
SAFETY PRECAUTIONS
PREPARATION
2
3
15
Accessories
15
Optional Extras
16
Parts and Components
17
-- Main Unit
17
Using the Joystick Button
19
-- Basic functions
19
-- Adjusting the menu
20
Projector Status Indicators
20
Installation
21
-- Installation Precautions
21
-- Projection Distance per Screen
Size
23
-- Kensington Security System 25
MAGIC REMOTE CONTROL 26
To Register the Magic Remote
Control
28
To Re-register the Magic Remote
Control
28
Using the Magic Remote Control 29
USING THE PROJECTOR
30
-- Focus of the Screen Image 30
-- Watching With the Projector 31
CONNECTING DEVICES
32
HDMI Connection
33
-- Connecting to HD Receiver, DVD,
or External Devices
33
-- Connecting a PC
34
-- Connecting a Laptop
35
Connecting Headphones
36
Connecting a Digital Amp
37
Connecting a smart device
(smartphone, tablet, etc.)
38
-- Slimport supported devices 38
-- Apple Lightning Digital AV
adapter supported devices 38
-- Apple 30-pin Digital AV adapter
supported devices
38
MAINTENANCE
39
Cleaning
39
-- Cleaning the Lens/Mirror
39
-- Cleaning the Projector Case 39
SPECIFICATIONS
40
Open Source Software Notice
Information
43
SYMBOLS
44
15
PREPARATION
The pictures may differ slightly from the actual product.
ENGLISH
Accessories
Accessories included with the projector are show below.
Accessories are subject to change without prior notice.
New accessories may be added or old ones removed.
Magic Remote Control
Two AA Batteries
Owner's Manual
AC-DC Adaptor
Power cord
• When connecting an HDMI or USB cable, or
connecting a USB flash drive to the HDMI
or USB port, use a product that has a width
of 18 mm or less and a height of 10 mm or
less. If the USB cable or USB flash drive does
not fit the USB ports of the projector, use an
extension cable that supports USB 2.0.
• When connecting two USB devices at the same time, each one should have
bezels less than 8.5 mm thick.
• Use a certified cable with the HDMI logo attached.
• If you do not use a certified HDMI cable, the screen may not display or a
connection error may occur. (Recommended HDMI cable types)
-- Ultra High-Speed HDMI®/™ Cable (3 m or less)
16
Optional Extras
To purchase optional accessories, visit an electronics store or online shopping site or
contact the retail store where you purchased the product. Optional accessories are
subject to change without prior notice.
ENGLISH
Projection Screen
HDMI Cable
Optical Cable
LG Audio Device
17
Parts and Components
Main Unit
Joystick Button
Speaker
Outlet Vent1)
Mirror
2)
Inlet Vent
Focus Ring
Speaker
Lens2)
Inlet Vent
IR Receiver
Bottom of the Projector
Adjustable leg3)
1) Due to the high temperature of vent area, do not get close to the vent area.
2) Do not touch the lens and mirror when using the projector. The lens may be
damaged. (Keep lens away from sharp objects.)
3) Turn the adjustable leg left or right to adjust the angle.
ENGLISH
This projector is manufactured using high-precision technology. You may, however, see
tiny black dots and/or bright colored dots (red, blue, or green) that continuously appear
on the projector screen. This is a normal result of the manufacturing process and does
not indicate a malfunction.
18
ENGLISH
Side
3
2
1
USB1
USB2
Back
5
6
No.
1
Description
(Headphone Port)
Port
2
3
USB port
4
Port
5
6
Port
Port
4
5
19
Using the Joystick Button
You can operate the projector by pressing the button or moving the joystick left, right,
up, or down.
Power On
When the projector is turned off, place your
finger on the joystick button, press it once,
and release it.
Power Off
Press and hold the joystick button for more
than 3 seconds while the projector is on.
Volume
Control
Place your finger over the joystick button
and move it left or right, you can adjust the
volume level.
Up/Down/
Left/Right
If you move the joystick up, down, left, or
right, you can move the cursor to select the
menu items.
NOTE
• Move the joystick button up, down, left, or right. Be careful not to press the
joystick button. If you press the button while moving the joystick, the volume
control may not work, and the cursor may not move.
ENGLISH
Basic functions
20
Adjusting the menu
ENGLISH
When the projector is turned on, press the joystick button one time.
You can adjust the menu items ( ,
, , ) moving the joystick button left,
right, up, or down. Move to the desired menu item, and then press the joystick button
once to select it.
Turns the power off.
Changes the input source.
Clears on-screen displays and returns to projector viewing.
Displays the Settings menu.
Projector Status Indicators
LED Power Indicator
LED Power Indicator
LED Power Indicator
Red
Power standby state
Off
The projector is operating with the power on.
21
Installation
Installation Precautions
-- Do not place the projector on a
carpet or rug. If the projector’s
inlet vent is on the bottom, be
careful not to block the vent and
always use the projector on a
solid, level surface.
ENGLISH
• Place the projector in a wellventilated environment.
-- To prevent internal overheating,
install the projector in a wellventilated place. Do not place
anything near the projector.
That may block its air vents. If
the air vents are blocked, the
internal temperature of the
projector will increase.
-- Be sure to prevent foreign
objects such as paper debris
from entering the projector.
-- Leave an adequate open area
(30 cm or more) around the
projector.
• Do not place the projector in a hot,
cool, or humid environment.
• Do not place the projector in a place
where it will easily attract dust.
-- This may result in fire.
• Never open any cover on the
projector. There is a high risk of
electric shock.
22
ENGLISH
• The projector is manufactured using
high-precision technology. You may,
however, see tiny black dots and/
or bright colored dots (red, blue or
green) that continuously appear
on the projector screen. This is a
normal result of the manufacturing
process and does not indicate a
malfunction.
• The remote control may not work
in an environment where a lamp
equipped with electronic ballasts
or a three-wavelength fluorescent
lamp is installed. Replace the lamp
with an international standard lamp
for the remote control to work
normally.
• To install to the ceiling, attach the
ceiling-type bracket to the projector
with M4 x 8 mm screws.
• Do not overtighten the screws. It
may damage the case, causing the
projector to fall and cause a serious
injury. (Recommended Torque: 5~8
kgf·cm)
23
Projection Distance per Screen Size
1
2
4
Place the projector an appropriate distance away from the screen. The distance
between the projector and the screen determines the actual size of the image.
Position the projector so that the lens is at a right angle to the screen. If the
projector is not at a right angle, the projected image will look distorted. To
correct the distortion, use the Edge Adjustment function.
Connect the power cord of the projector and the connected device to the wall
outlet.
ENGLISH
3
Place the projector on a sturdy, level surface, together with the PC or audio/
video source.
24
Ratio of upward projection: 125 %
X
Screen
ENGLISH
Y
C
C
D
D
B
A
inches
60
70
80
90
100
mm
1524
1778
2032
2286
2540
Horizontal Size (X) x
Vertical Size (Y)
mm
1328 x
747
1550 x
872
1771 x
996
1992 x
1121
2214 x
1245
A
mm
414
482
550
618
686
Screen Size
B
mm
105
173
241
309
377
C
mm
149
181
213
245
276
D
mm
241
273
304
336
368
The projection distance may vary depending on the installation conditions.
NOTE
• If the projected image looks distorted or bent, check to see if the screen is
installed properly.
25
Kensington Security System
ENGLISH
• This projector has a Kensington Security Standard connector as an anti-theft
mechanism. Connect a Kensington Security System cable as shown below.
• For more information on installation and use of the Kensington Security System,
refer to the user’s guide provided with the Kensington Security System.
• The Kensington Security System is an optional accessory.
• What is Kensington?
Kensington is a company that provides safety systems for laptops and other
electronic devices. Website: http://www.kensington.com
26
MAGIC REMOTE CONTROL
ENGLISH
If the battery low message appears while using the Projector,
replace the batteries.
As shown in the figure, press the top of the battery cover and
slide it down the cover. Insert two new and identical batteries
(1.5 V, AA type) with + and - poles pointing in the correct
direction in the remote control.
1
NOTE
• Do not mix new batteries with old ones.
(POWER)
Turns the Projector on or off.
(STB POWER)
You can turn your set-top box on or off by adding the set-top
box to the universal remote control for your Projector.
Number buttons
Enters numbers.
Change the input source to [HDMI1].
*
You can access apps using the number buttons corresponding to
the features.
(Screen Remote)
Displays the Screen Remote.
-- Accesses the Universal Control Menu in some regions.
Adjusts the volume level.
(MUTE)
Mutes all sounds.
(MUTE) *
Accesses the [Accessibility] menu.
Moves to the previous/next page.
(SEARCH)
Search for content such as movies and other videos, or perform a
web search by entering your search terms in the search box.
2
27
Accesses the Home menu.
*
Displays the list used previously.
(Q. Settings) *
Displays the [All Settings] menu.
(Up/Down/Left/Right)
Press the up, down, left or right button to scroll the menu.
If you press
buttons while the pointer is in use,
the pointer will disappear from the screen and Magic Remote will
operate like a general remote control. To display the pointer on
the screen again, shake Magic Remote to the left and right.
Wheel (OK)
Press the center of the
Wheel (OK) button to select a
menu. You can change pages by using the Wheel button.
Returns to the previous screen.
*
Clears on-screen displays and returns to last input viewing.
Changes the picture mode.
Allows you to use the SIMPLINK function.
(INPUT)
Changes the input source.
(INPUT) *
Displays all the lists of external inputs.
Changes the aspect ratio of the screen per pressing of the
button.
Coloured buttons
These access special functions in some menus.
Control buttons ( , )
You have access to premium content, video content and devices
that support SIMPLINK.
By zooming in on the selected area, you can view it in full screen.
* : To use the button, press and hold for more than 3 seconds.
ENGLISH
(Q. Settings)
Accesses the Quick Settings.
28
To Register the Magic Remote Control
To use the Magic Remote control, register it with your projector first.
1
2
Put batteries into the Magic Remote and turn the Projector on.
ENGLISH
Point the Magic Remote at your projector and press the
Wheel (OK) on
the remote control.
• If the projector fails to register the Magic Remote, try again after turning the
projector off and back on.
To Re-register the Magic Remote Control
1 Press the and
buttons at the same time, for five seconds, to unpair
2
the Magic Remote with your projector.
Press the
Wheel (OK) button towards the projector to re-register the
magic remote control.
29
Using the Magic Remote Control
CAUTION
• Use the remote control within the specified range (within 10 m). You may
experience communication failures when using the device outside the coverage
area or if there are obstacles within the coverage area.
• You may experience communication failures depending on the accessories.
Devices such as a microwave oven and wireless LAN operate in the same
frequency band (2.4 GHz) as the Magic Remote. This may cause communication
failures.
• The Magic Remote may not work properly if a wireless router (AP) is within 1 m
of the projector. Your wireless router should be more than 1 m away from the
projector.
• Do not disassemble or heat the batteries.
• Do not drop the battery. Avoid extreme shocks to the battery.
• Inserting a battery in the wrong way may result in explosion.
ENGLISH
• Shake the Magic Remote slightly to the right and left
or press
,
(INPUT) buttons to make the
pointer appear on the screen.
• If the pointer has not been used for a certain period
of time or Magic Remote is placed on a flat surface,
then the pointer will disappear.
• If the pointer is not responding smoothly, you can
reset the pointer by moving it to the edge of the
screen.
• The Magic Remote depletes batteries faster than a
normal remote due to the additional features.
30
USING THE PROJECTOR
Focus of the Screen Image
ENGLISH
When an image appears on the screen, check if it is in focus and fits the screen
properly.
Focus Ring
• To adjust the focus of the image, rotate the focus ring.
• Make sure the product does not move when adjusting the focus.
31
Watching With the Projector
1
Select the
(INPUT)
(POWER) button to turn the projector
[All Inputs] and select the input signal you want.
Control the projector using the following buttons while watching projector.
Button
Description
Moves to the previous/next page.
Adjusts the volume level.
(MUTE)
4
Mutes the sound from the projector.
To turn the projector off, press the
(POWER) button.
ENGLISH
2
3
When in standby mode, press the
on.
32
CONNECTING DEVICES
You can connect various external devices to the projector.
ENGLISH
Computer/Notebook
USB
DVD
Digital Device
LG Audio Device
Headphone
Games Console
Mobile Phone
HDMI - Page 33, 34, 35
Headphone - Page 36
Digital Amp - Page 37
Smart device - Page 38
33
HDMI Connection
Connecting to HD Receiver,
DVD, or External Devices
With an HDMI cable, you can enjoy high
quality picture and sound.
Using a HDMI cable, connect the
port of the projector to the
HDMI output port of the device to
connect. Both video and audio are
output at the same time.
Optional Extras
ENGLISH
Connect an HD receiver, DVD, or
external devices to the projector and
select an appropriate input mode.
You can connect with any HDMI input
port.
•
(INPUT) [All Inputs]
[HDMI1]/[HDMI2]
NOTE
ARC (Audio Return Channel)
• External audio devices that support
SIMPLINK and ARC must be
connected using
port.
• When connected with a high-speed
HDMI® cable, external audio devices
that support ARC output or SPDIF
work with the SIMPLINK function
without the need for an additional
optical audio cable.
34
Connecting a PC
ENGLISH
The projector supports Plug and Play.
Your PC will automatically detect
the projector and requires no driver
installation.
Using an HDMI cable, connect the
port of the projector to the
HDMI output port of your PC. Both
video and audio are output at the same
time.
Optional Extras
35
Connecting a Laptop
You can connect the projector to a
laptop to use various functions.
The table below shows examples
of switching the output. For more
information, refer to the External
Output, Connecting to an External
Monitor, or similar sections of the
owner’s manual of your computer.
Brand
Switching Output
Lenovo
HP
Dell
Acer
ASUS
Optional Extras
LG
Samsung
Apple
Adjust the control
panel to enable
mirroring after
start-up.
ENGLISH
Using an HDMI cable, connect the
port of the projector to the
HDMI output port of your laptop. Both
video and audio are output at the same
time.
Examples of switching output
settings when connecting a laptop
36
Connecting Headphones
You can listen to the audio through a
headphone.
ENGLISH
Not provided
37
Connecting a Digital
Amp
Optional Extras
• Refer to the user manual of the
audio device to connect.
• When connecting this product to
other devices, make sure to turn off
and unplug all the devices.
• The audio output of this product
has wide-ranging audio bandwidth,
so the receiver volume must be
adjusted properly. Speakers can
be damaged by unexpected high
frequencies.
• Connecting the
port of
the projector to the digital audio
input port of a digital amp and the
audio input port of the projector
to the analog audio output port of
the digital amp can cause sound
oscillation due to the closed loop.
Remove one of the two connections
to prevent this. (This also applies to
home theater devices.)
ENGLISH
Using an optical cable, connect the
digital audio input port of a digital amp
to the
port of the projector. The output of an
amp with a digital converter must be set
to the desired audio format. When using
a HDMI cable to connect a home theater
or when connecting an optical output
to an external audio device, set [Sound
Out] to [HDMI ARC] or [Optical]. If a
projector, home theater, or the speaker
of an external audio device is operating
at the same time, there will be an echo.
NOTE
38
Connecting a smart device (smartphone, tablet,
etc.)
ENGLISH
•
(INPUT) [All Inputs] [HDMI1]/[HDMI2]
• The picture may look different from the actual product.
Connect a smart device to the projector using a cable1) and set the external input of
the projector to HDMI. The smart device screen will then be displayed through the
projector. You can connect with any HDMI input port.
For model-specific instructions regarding use of the wired connection, please check
with the smart device manufacturer.
Supported smart devices may change depending on the circumstances of each
manufacturer.
1) Examples of how to connect a cable to different smart devices (cable purchased
separately).
Slimport supported devices
HDMI cable
Charging port of a
smart device
Slimport adapter
Charging
cable of
a smart
device
Projector HDMI port
Projector USB port
Charger
Apple Lightning Digital AV adapter supported devices
HDMI cable
Projector HDMI port
Lightning Digital AV
adapter
Charging port of a
smart device
Apple 30-pin Digital AV adapter supported devices
HDMI cable
Apple 30-pin Digital
AV adapter
Projector HDMI port
Charging port of a
smart device
39
MAINTENANCE
Clean your Projector to keep it in optimal condition.
Cleaning the Lens/Mirror
• If there is any dust or staining on the lens /mirror surface, you must clean the
lens.
• To remove dust or stains on the lens/mirror, use a compressed air duster, cotton
swab, or soft cloth to gently wipe the lens.
• Do not wipe the lens/mirror while the product is in use or immediately after it
has been turned off.
• When cleaning the lens/mirror, do not use a cleanser, automobile or industrial
shiner, abrasive, wax, benzene, alcohol, water, etc., as this may damage the
product.
Cleaning the Projector Case
• To clean the projector case, first unplug the power cord.
• To remove dust or stains, use only a dry, lint-free, nonabrasive cloth to polish
the lens.
• Do not use alcohol, benzene, thinners, or other chemicals, which may damage
the case.
ENGLISH
Cleaning
40
SPECIFICATIONS
HF65LS (HF65LS-EU)
HF65LSR (HF65LSR-EU)
MODEL
ENGLISH
Resolution (Pixel)
1920 (Horizontal) × 1080 (Vertical)
Aspect ratio
16:9 (Horizontal:Vertical)
Projection distance
-- Screen size
414 mm to 686 mm
-- 1524 mm to 2540 mm (60 inches to 100 inches)
Ratio of upward
projection
125 %
100 W
Power consumption Networked standby: 1.3 W
(If all network ports are activated.)
AC-DC Adaptor
Manufacturer: Honor
Model: ADS-110CL-19-3 190110G
19 V
5.79 A
(Adaptor Input 100-240 V @ 50/60 Hz)
Audio Output
3W+3W
Height
127.6 mm (without foot), 128.8 mm (with foot)
Width
131.4 mm
Depth
309 mm
Weight
1.8 kg
USB Device
5 V, 0.5 A (Max.)
Temperature
Environment
Condition
Operation
0 °C to 40 °C
Storage
-20 °C to 60 °C
Relative Humidity
Operation
0 % to 80 %
Storage
0 % to 85 %
• Use only power supplies listed in the user instructions.
• Contents in this manual may be changed without prior notice due to upgrade of
product functions.
• The network port can be activated/deactivated from the menu of the projector
by selecting the [Mobile Projector On] feature.
41
HDMI (DTV) Supported Mode
Resolution
720 x 480p
720 x 576p
1280 x 720p
1920 x 1080i
1920 x 1080p
Vertical Frequency
(Hz)
31.46
59.94
31.50
60.00
31.47
59.94
31.50
60.00
31.25
50.00
44.96
59.94
45.00
60.00
37.5
50.00
28.12
50.00
33.72
59.94
33.75
60.00
26.97
23.97
27.00
24.00
33.71
29.97
33.75
30.00
56.25
50.00
67.43
59.94
67.50
60.00
ENGLISH
640 x 480p
Horizontal Frequency
(kHz)
42
HDMI (PC) Supported mode
ENGLISH
Resolution
Horizontal Frequency
(kHz)
Vertical Frequency (Hz)
640 x 350
31.46
70.09
720 x 400
31.46
70.08
640 x 480
31.46
59.94
800 x 600
37.87
60.31
1024 x 768
48.36
60.00
1152 x 864
54.34
60.05
1280 x 1024
63.98
60.02
1360 x 768
47.71
60.01
1920 x 1080
67.5
60.00
• If an invalid signal is input into the projector, it will not be displayed properly on
the screen or a message such as [No Signal] or [Invalid Format] will be displayed.
• The projector supports the DDC1/2B type as the Plug and Play function (Autorecognition of PC monitor).
• 1920 x 1080 is recommended as the best picture quality in the PC mode.
43
Open Source Software Notice
Information
ENGLISH
To obtain the source code under GPL, LGPL, MPL, and other open source licenses, that
is contained in this product, please visit http://opensource.lge.com.
In addition to the source code, all referred license terms, warranty disclaimers and
copyright notices are available for download.
LG Electronics will also provide open source code to you on CD-ROM for a charge
covering the cost of performing such distribution (such as the cost of media, shipping,
and handling) upon email request to opensource@lge.com.
This offer is valid for a period of three years after our last shipment of this product. This
offer is valid to anyone in receipt of this information.
44
SYMBOLS
Refers to alternating current (AC).
ENGLISH
Refers to direct current (DC).
Refers to class II equipment.
Refers to stand-by.
Refers to “ON” (power).
Refers to dangerous voltage.
ABOUT LG PROJECTOR
Image shown may differ from your projector.
Your projector’s OSD (On Screen Display) may differ slightly from that shown in this
manual.
[ ] : the buttons and the text to be displayed on the projector screen.
P/NO : SAC37813517 (1908-REV01)
Copyright © 2019 LG Electronics Inc. All Rights Reserved.
2
CONTENTS
ABOUT LG PROJECTOR
4
ENGLISH
Home Tutorial
4
-- Using the Home feature of the
LG Projector
4
Network Setting
-- Network Setting
8
8
HOW TO OPERATE
PROJECTOR
10
Using the Screen Remote
10
Setting Universal Control
12
Launching Apps through [QUICK
ACCESS]
13
-- Using apps quickly and easily
with [QUICK ACCESS]
13
SIMPLINK (HDMI-CEC)
-- Using SIMPLINK
15
15
HOW TO USE VARIETY OF
CONTENTS
22
LG Content Store
22
Creating Wish List
-- Using [My Content]
23
23
Account Creating
-- Creating LG Account
24
24
Account Management
-- Managing your LG Account
25
25
Search Content
-- [Search]
-- Searching for Content
26
26
26
Use App & Contents
-- Installing Apps
27
27
Watching VOD Content
28
PLAY OTHER DEVICE FILES 29
Using the LG TV Plus App
17
-- Connecting Your Smart Device
to a Projector Using the LG TV
Plus App
17
-- Controlling Your Projector with
the LG TV Plus App
18
[Photo & Video]
-- Viewing Photos and Videos
-- Photo Player
-- Video Player
-- Supported Video Files
-- Cautions for Video Playback
29
29
30
32
34
36
Mobile Connection
-- Using Mobile Connection
[Music]
-- Playing Music
-- Using the Music Player
37
37
38
[File Viewer]
-- Viewing Files
-- Browsing File Viewer
41
41
42
19
19
Using a Keyboard and Mouse
20
-- Using a USB Wired/Wireless
Mouse
20
-- Using a USB Wired/Wireless
Keyboard
20
Using a Gamepad
21
3
Connecting USB
44
-- Tips for Using a USB storage
device
45
48
60
Quick Settings
60
-- To use Setting function quickly
60
[Picture] Settings
61
[Sound] Settings
68
[Network]
75
77
Share Smartphone Screen
-- To see the Mobile Device's
screen on the projector
48
[General]
Share Computer Content
-- What Is Content Share?
49
49
[Safety] Settings
85
[Accessibility]
86
Share Computer Screen
52
-- To see the PC screen on the
projector
52
TO UPDATE SOFTWARE
87
TROUBLESHOOTING
88
BENEFITS OF SMART
PROJECTOR
Abnormal Operation
88
53
Screen Problems
89
Zooming in the Projector Display53
-- Moving the Position of an
Enlarged Screen
54
Sound Problems
90
PC Connection Problems
91
Enjoying Internet
-- Using the [Web Browser]
55
55
Playing Sound from a Smart Device
through the Projector’s Speakers
58
Notifications
-- Using [Notifications]
59
59
[Photo & Video] Movie Playback
Problems
92
Network Connection Problems 94
LG Account Problems
96
Contents Problems
97
Internet Browser Problems
97
ENGLISH
Share Smart Phone
46
-- Content Share with Smartphone
46
TOUR LIST OF SETTINGS
4
ABOUT LG PROJECTOR
Home Tutorial
ENGLISH
Using the Home feature of the LG Projector
You can open the Home screen by pressing the
button on your remote
control. You can combine frequently used apps on a single screen and use
whichever you want at any time.
1
2
3
4
Description
Launch [SEARCH].
1
You can switch to another input or change your settings.
You can easily change the settings of your projector.
Select
for advanced setup.
2
Add content you like to use, easily and quickly. (This feature is not
supported in some countries. When you select the feature, you will be
directed to the LG Content Store.)
3
This is a list of recently used apps. To access the list of recently used
apps, select this item and then press and hold the
Wheel (OK) or
OK button. You can view all the apps you used recently in the list.
4
You can run, move, and delete all the apps installed on your projector.
5
Using Recent List
To access the list of recently used apps, press and hold the
button on your
remote control, or press and hold a recently used item on the Home screen. You
can run or exit all the apps you’ve used recently.
ENGLISH
1
Description
1
Exit the app.
6
Managing Apps
You can view a list of all apps installed on your projector, change their positions, or
delete them.
• Some apps cannot be edited.
ENGLISH
1
2
3
Select the app you want to edit, and press and hold the
Wheel (OK) or
OK button on the Remote Control. This will activate the app edit mode.
To move the app to your desired position, go to the position and press the
Wheel (OK) or OK button. To delete an app, select the above the app.
• You can move and delete as many apps as you wish before exiting the edit
mode.
• You can also move apps with the
buttons on your remote control.
When you have completed the edit, click [DONE] to exit the app edit mode.
7
Stopping the current function
ENGLISH
1
2
3
Press the
button on the remote control.
Select the application name at the top left corner of the screen by the Remote
Control to display the Close icon.
Select the Close icon displayed next to the application name to quit the
function in use.
8
Network Setting
Network Setting
ENGLISH
If you configure settings for the network, you can use various services such as
online contents and applications.
Setting a Wired Network
1
2
Connect the LAN port of the projector and the router using a LAN cable. The
router should be connected to the Internet beforehand.
Press the
(Q. Settings) button on the remote control and select
[Network] [Wired Connection (Ethernet)]. This will start the wired network
connection.
• If the router supports DHCP, the projector is automatically connected to the
network when you connect the projector to the network with a LAN cable.
Setting a Wireless Network
1
2
3
4
Turn on the power of the router connected to the Internet.
Press the
(Q. Settings) button on the remote control and select
[Network] [Wi-Fi Connection]. This will start the Wireless network
connection.
When the network search is complete, the list of networks available for
connection is shown.
Select a network to connect. If your Wireless Router is password protected,
enter the password configured for the router.
9
Network Setting Warnings
ENGLISH
• Use standard LAN cable (connect to Cat7 or higher with RJ45 connector, 10
Base-T, or 100 Base TX LAN port).
• Resetting the modem may fix some network connection problems. Turn the
power OFF, disconnect and reconnect it, and then turn the power on to solve
the problem.
• LG Electronics is not responsible for any network connection problems or any
faults, malfunctions, or errors caused by network connection.
• The network connection may not work properly because of network settings or
the Internet service provider.
• DSL service must use a DSL modem; and cable service must use a cable modem.
Since only a limited number of network connections may be available, projector
network setting may not be used depending on the contract with Internet
service provider. (If the contract does not allow more than one device per line,
only the already-connected PC may be used.)
• A wireless network can experience interference from other devices that use
the 2.4 GHz frequency (wireless phone, Bluetooth device, or microwave oven).
Although interference can also happen when using the 5 GHz frequency, it is
less likely to occur.
• The wireless environment can make wireless network service run slowly.
• Failure to turn off all local home networks may cause excessive traffic on some
devices.
• The access point device must support wireless connections and wireless
connection feature must be enabled on the device to have AP (access point)
connection. Contact the service provider for availability of wireless connections
on the access point.
• Check SSID and security settings of the AP. Refer to the appropriate
documentation for SSID and security settings of the AP.
• Invalid settings of network devices (wired/wireless line sharer, hub) can cause
the projector to operate slowly or not operate properly. Install the devices
correctly according to the appropriate manual and network.
• The connection method may differ depending on the AP manufacturer.
10
HOW TO OPERATE PROJECTOR
Using the Screen Remote
ENGLISH
You can control external devices connected to your projector by using the Screen
Remote displayed on your projector screen.
• This feature is available on certain models only.
1
2
Press the
button on the Magic Remote.
Using the Magic Remote, select your desired button on the Screen Remote
displayed on your projector screen.
1
6
2
3 4 5
11
Description
2
You can capture your projector screen.
• This feature is available on certain models only.
• You can view/delete screen-captured images in the [Photo & Video]
app.
3
The buttons suitable for the selected device appear.
4
You will see more remote control buttons.
5
You can start the [Device Connector] app. You can set the universal
remote control.
6
You can change the position of the screen remote control.
• This feature can only be used with the Magic Remote.
• You can purchase the Magic Remote separately if it is not provided.
• The types of buttons appearing on the Screen Remote vary, depending on the
region and the type of connected device.
• Some features and services may not be provided depending on models or
regions.
ENGLISH
1
Configure [Set Up Universal Control] for external devices connected to
your projector.
When you select a device, the Screen Remote turns into the remote
control for the device.
If a sound bar is connected, the Screen Remote can be used as a
remote control for the sound bar.
12
Setting Universal Control
You can control devices such as Set-Top Box, Blu-ray Player, or Home Theater
using by Magic Remote.
• This feature is available on certain models only.
ENGLISH
1
2
3
4
5
•
•
•
•
•
•
•
•
•
•
•
Check that the device you want to set is connected to your projector.
Press the
(Press the
button on the remote control and select
button on the remote control.)
at the top right.
Select [All Inputs] and go to [INPUTS].
Select the input mode that the device is connected to in [INPUTS].
If you press [Set Up Universal Control], you can set up the Universal Control.
Follow the instructions on the screen to finish the setup.
If you want to change or cancel Universal Control Settings, go to
[All
Inputs] and select [Edit Universal Control].
You can also set the Universal Control in
[Device Connector].
You can use this only with the Magic Remote. (The provided remote control
differ depending upon model.)
You can purchase the Magic Remote separately if it is not provided.
This feature is available in certain countries only.
When changing the settings, check that the device to be changed is turned on.
You can set one device per type.
If you connect to a network before setting the Universal Control, the latest
update for the supported manufacturer list becomes available.
Some buttons may not work depending upon the model of the external device.
Place the device near the projector for seamless operation.
If there is an obstacle in front of the device, it may not be able to receive the
signal properly. If the device is in a drawer, open the drawer.
13
Launching Apps through [QUICK ACCESS]
Using apps quickly and easily with [QUICK ACCESS]
Setting the [QUICK ACCESS]
1
2
3
Launch the app or input you wish to assign.
Press and hold the number button (1~9) you want to register.
When the registration pop-up window appears, select [Yes].
• If you press and hold a number button that has already been registered, the
registered function will be performed.
• To see the items that can be registered, select a number that has not been
registered in the [QUICK ACCESS] edit mode.
• If you are in a mode where [QUICK ACCESS] cannot run, no action will be
performed.
• If you delete a registered app, [QUICK ACCESS] will be deregistered as well.
ENGLISH
• Press and hold a number button on the remote control to open an app or to
activate an external input registered to the button.
14
Checking and editing QUICK ACCESS
Press and hold the number 0 button on the remote control.
The [QUICK ACCESS] edit screen appears.
ENGLISH
4
1
2
3
Description
1
Selecting a number that has already been registered allows
deregistering it.
2
When you select a number that has not been registered, items that can
be registered will be shown.
3
An item that has been registered to a different number is indicated
with a check mark.
4
You can view a brief instruction for this function.
15
SIMPLINK (HDMI-CEC)
Using SIMPLINK
1
2
3
4
5
Connect the SIMPLINK HDMI Output port to the projector’s HDMI IN port with
an HDMI cable.
Press the
[General]
(Q. Settings) button on the remote control and select
[SIMPLINK (HDMI-CEC)].
Set [SIMPLINK (HDMI-CEC)] to [On].
Configure the [Auto Power Sync] settings to [On] or [Off]. (If [Auto Power
Sync] is set to [On], turning on a SIMPLINK-linked device will turn the
projector on. When you turn off the projector, the device will also be turned
off.)
Turn on the connected device. When the projector automatically connects to
the device, the input will switch. If the device is not automatically connected to
the projector, click the
(INPUT) button.
• This feature works only with devices with the
logo. Check for the
SIMPLINK logo on the external device. There may be a problem using the device
if the device does not meet the required specifications.
• A high-speed HDMI® cable with CEC (Consumer Electronics Control) function
is required to use SIMPLINK. Pin 13 of the high-speed HDMI® cable is used for
data transfer between devices.
• If you want to output sound to the external audio equipment connected through
the HDMI cable, set [SIMPLINK (HDMI-CEC)] to [On].
ENGLISH
You can conveniently control and use various multimedia devices connected
through HDMI with the projector’s remote control.
16
Supported SIMPLINK Functions
ENGLISH
• Instant Play
When you start a multimedia device, you can immediately watch content from
the device on the projector without having to control anything.
• Controlling devices with the projector remote control
Enables the user to control multimedia devices with the projector remote
control to watch content.
-- The pointer function of the Magic Remote can be limited.
• Main Power Off
If [Auto Power Sync] is set to [On] in the [SIMPLINK (HDMI-CEC)] settings and
the projector is turned off, the devices connected to your projector via SIMPLINK
will also be turned off. Likewise, your projector will be turned off if you turn off a
device connected to your projector via SIMPLINK.
-- This feature is only available in certain devices.
• Main Power On
If [Auto Power Sync] is set to [On] in the [SIMPLINK (HDMI-CEC)] settings,
turning on a SIMPLINK-linked device will turn the projector on.
-- If [SIMPLINK (HDMI-CEC)] is set to [Off], [Auto Power Sync] cannot be set
to [On].
17
Using the LG TV Plus App
You can control the functions of your projector by using the app installed on your
smart device.
1
2
3
4
5
6
7
8
Download LG TV Plus app from the app store of your smart device.
Press the
[Network].
(Q. Settings) button on the remote control and select
Set [LG Connect Apps] to [On].
Connect the projector and your smart device on the same Wi-Fi network.
Run the LG TV Plus app installed on your smart device.
The app will automatically scan for projectors that can be connected to your
smart device.
Select the projector you want from the list of search results. A PIN code
appears on the projector screen.
Enter the PIN code in the LG TV Plus app to pair your smart device with the
projector.
ENGLISH
Connecting Your Smart Device to a Projector Using the LG
TV Plus App
18
Controlling Your Projector with the LG TV Plus App
You can tap the buttons on your smart device’s screen to control the projector.
1
2
3
ENGLISH
Description
1
You can use the same functions as the Magic Remote’s pointer and
arrow keys.
2
You can adjust the volume or make other adjustments without using
the remote control.
3
You can open an app installed on your Projector or configure settings
for functions such as switching input.
• Some controls may be limited in external input mode.
• The app’s screen and functionality are subject to change without prior notice.
• Available features may differ depending on your country and OS.
19
Mobile Connection
Using Mobile Connection
Connecting a Smart Device with Mobile Connection
Set up a connection following the guide below:
1
2
3
4
5
Install the LG TV Plus app on the smart device.
Connect both your projector and the smart device to the same network.
Run the LG TV Plus app and set up a connection to your projector following the
instructions shown on the screen.
Press the
button, and a list of connected smart devices will appear on the
right side of the screen.
Select your desired smart device.
• Android smart devices will automatically attempt to reconnect when they enter
the network zone after the initial connection has been established.
Sharing Content with Mobile Connection
You can share and enjoy the content stored on your smart device through your
Projector.
1
2
Run the LG TV Plus app installed on your smart device.
Set up your desired content on your projector.
• Supported features may vary depending on the version and manufacturer of
your smart device’s operating system.
ENGLISH
Mobile Connection lets you share and enjoy the content stored on people’s smart
devices through your projector.
• It is recommended that your Android smart devices run Lollipop or later versions
of Android.
20
Using a Keyboard and Mouse
Using a USB Wired/Wireless Mouse
ENGLISH
Connect your mouse to the USB port. Use the mouse to move the pointer on the
projector screen and select the menu you want.
• The right button and the special buttons on the mouse do not work.
• When using a wireless USB mouse/keyboard, the experience may be affected by
the distance and wireless condition.
Using a USB Wired/Wireless Keyboard
Connect your keyboard to the USB port. You can enter text with the connected
keyboard device.
• It is not possible to enter text on some screens.
• It is recommended that you use a product that has been tested for compatibility
with LG projectors.
-- LOGITECH K360, LOGITECH K400, LOGITECH K750, LG Electronics MKS1200
• You can change the input language by pressing the language switch key or the
right Alt key. It can also be changed by pressing the Ctrl key and the Space key
at same time.
• Wireless USB keyboard use may be affected by the usage range and the wireless
environment.
• To enter text in the text field, use the on-screen keyboard on your projector
screen or a USB keyboard.
21
Using a Gamepad
ENGLISH
Connect your gamepad to the USB port on the projector if the game requires a
gamepad.
• It is recommended that you use a gamepad that has been tested for
compatibility with LG projectors.
-- LOGITECH F310, LOGITECH F510, LOGITECH F710, LOGITECH Rumblepad
2, LOGITECH Cordless Rumblepad 2, LOGITECH Dual Action Gamepad,
MICROSOFT Xbox 360 Controller (cable), SONY Playstation(R)3 Controller
22
HOW TO USE VARIETY OF CONTENTS
LG Content Store
ENGLISH
You can download and use apps from various categories such as education,
entertainment, lifestyle, news, and games.
1
2
•
•
•
•
•
Press the
button on the remote control.
Launch the [LG Content Store] application.
This feature is available in certain countries only.
Features may be limited in certain countries.
Content may differ depending upon the model or country.
Exercise caution when used by children. Children may have access to
inappropriate online content through this product.
You can block inappropriate online content by restricting access to some apps
such as the Internet browser. Restrictions can be set in
(Q. Settings)
[Safety] [Application Locks].
Recommended Content on the Main Screen
The main screen of the [LG Content Store] shows the most popular content for
each category. Select any content to view its details.
• Internet connection is required to use this feature.
23
Creating Wish List
Using [My Content]
1
2
3
4
5
•
•
•
•
•
Press the
button on your remote control.
Select [My Content] in the top left of the screen.
Select [Add Content].
Search for content.
Select your desired content from the search results to add it to [My Content].
• You can also select from among recommended content shown under the
search box and directly add it to [My Content].
This feature is only available in certain countries.
The type of content you can add to [My Content] may vary depending on the
country.
You must have a network connection to use this feature.
You can move/delete added content in the same way you manage apps.
Some of the content services added to [My Content] may not be available if the
service has been terminated due to the provider’s circumstances.
ENGLISH
By adding your desired content to [My Content], you can use the content easily
and quickly anytime.
24
Account Creating
Creating LG Account
ENGLISH
In [Account Management], you can use your email address to create a new LG
account.
1
2
3
4
5
6
Press the
[General]
(Q. Settings) button on the remote control and select
[Account Management].
Select [CREATE ACCOUNT]. Read and accept the Terms of Service.
Enter an ID and a password. Your ID must be your email address.
Enter your birthday.
Select [OK]. Go to your email to verify your email address. Please verify your
email before the time expires.
Log in with your new account to start using the service.
• Internet connection is required to create an account.
• Required information may vary depending upon the country.
• Existing IDs that do not use an email address can be converted to your email
address.
• You can log in with your Facebook or Google account. (Features other than login
may not be available.)
• You may be restricted from the service depending upon your age.
25
Account Management
Managing your LG Account
1
2
Press the
Go to
(Q. Settings) button on the remote control.
[General]
[Account Management] to log in.
Personal Information
You can view or edit your information of the account currently logged in.
You can change the password or press [EDIT] to edit your personal information.
This feature is available in certain countries only.
ENGLISH
You can manage the information of your LG account.
26
Search Content
[Search]
ENGLISH
[Search] allows you to find and use a variety of content and information. You can
search for files, including image, video, audio files.
Searching for Content
1
2
Run [Search] by pressing the
(SEARCH) button on your remote control.
Search for a variety of content and information by typing in your desired
search terms.
1
2
Description
1
Enter your desired search term.
2
Change the settings of the features provided by [Search].
• Some apps provide a feature that lets you search within your
projector. If you run a search in such apps, the search will be
carried out in [Search].
• Search results may vary depending on the region, network settings, and whether
you have agreed to the terms and conditions.
27
Use App & Contents
Installing Apps
1
2
3
4
5
6
Press the
button on the remote control.
Launch the [LG Content Store] application.
Select your desired category from the categories shown at the top of the
screen. The list of available apps in the selected category will be shown.
Select an app to set up from the list.
Read the details of the app and then press [Install].
When the installation is complete, you can run the app immediately.
• Available categories may vary depending on the country or service status.
• If the storage on your projector is insufficient, you can install the apps by
connecting an external memory device.
• Some USB storage devices may not be supported or may not work properly.
• USB drivers containing apps from other LG TVs or LG Projectors may not be
used.
ENGLISH
You can use your LG account to install various apps on your projector.
28
Watching VOD Content
You can immediately enjoy dramas, movies, and more with real-time streaming.
ENGLISH
1
2
3
4
5
Press the
button on the remote control.
Launch the [LG Content Store] application.
Select your desired category from the categories shown at the top of the
screen, such as TV Shows and Movies. The list of available content in the
selected category will be shown.
Select an item from the list.
You can play your desired content.
An app may be required to play the content. If not installed, install the app to
play the content.
• This feature is only available in certain countries.
• Available categories may vary depending on the country or service status.
• To see detailed information about the content, select the title in the bottom and
the
area.
29
PLAY OTHER DEVICE FILES
[Photo & Video]
You can view photos and videos using the [Photo & Video] app.
1
2
3
4
Press the
button on your remote control.
Launch the [Photo & Video] application.
Select your desired storage device.
Select and view your desired photo or video.
1 23 4
Description
1
Select your desired type of content and viewing method.
2
Select and delete your desired content.
(You cannot delete files that are shared from other devices.)
3
Select the content you want to play. You can only select the same
type of content as you first selected.
4
Launch [Search].
• Certain content may not be displayed on the list if the number of all content
exceeds 40,000.
ENGLISH
Viewing Photos and Videos
30
Photo Player
Selecting a photo in the [Photo & Video] app runs the photo player. You can view
your saved photos.
ENGLISH
1 2
3
4
5
6
Description
1
Returns to the entire content list.
2
You can play background music by running the music player.
3
You can zoom the photos in/out.
4
Starts the slide show.
5
Rotates photos.
6
You can set the size of a photo or change the speed and effect of a
slide show.
31
Supported Photo Files
File type
Format
Resolution
JPEG
.png
PNG
Minimum: 64 x 64
Maximum: 5760 (W) x 5760 (H)
.bmp
BMP
Minimum: 64 x 64
Maximum: 1920 (W) x 1080 (H)
ENGLISH
.jpeg
.jpg
.jpe
Minimum: 64 x 64
Maximum
Normal Type: 15360 (W) x 8640 (H)
Progressive Type: 1920 (W) x 1440 (H)
32
Video Player
Selecting a video in the [Photo & Video] app runs the video player. You can view
your saved videos.
ENGLISH
1 2
3
4 5
Description
1
Returns to the entire content list.
2
You can select other content by displaying the playlist while watching
a video.
3
You can control basic video playback functions.
4
By zooming in the projector display, you can view images in a larger
size than the originals.
5
You can set additional options.
33
Setting Additional Options
ENGLISH
1 2 3 4
5
Description
1
You can change subtitle settings.
2
You can set audio tracks.
3
You can set continue watching to resume playing from the last viewed
scene.
4
You can set continuous playback.
If continuous playback is set, the next video is automatically played
after the playback of a video is over.
5
Returns to the basic operation screen.
34
Supported Video Files
Maximum data transfer rate:
ENGLISH
• Full HD video
H.264 1920 x 1080@60P BP/MP/HP@L4.2 40 Mbps
HEVC 1920 x 1080@60P MP@L4.1, Main10 Profile@L4.1 40 Mbps
Supported external subtitles:
*.smi, *.srt, *.sub (MicroDVD, SubViewer 1.0/2.0), *.ass, *.ssa, *.txt (TMPlayer),
*.psb (PowerDivX), *.dcs (DLP Cinema)
Supported embedded subtitles format:
• Matroska (mkv) : Sub Station Alpha (SSA), Advanced Sub Station Alpha (ASS),
SRT
• MP4 (mp4) : Timed Text
35
Supported video codecs
Extension
Codec
VC-1 Advanced Profile (except for WMVA), VC-1
Simple and Main Profiles
Audio
WMA Standard (except for WMA v1/ WMA
Speech)
Video
Xvid (except for 3 warp-point GMC), H.264/AVC,
Motion Jpeg, MPEG-4
Audio
MPEG-1 Layer I, II, MPEG-1 Layer III (MP3),
Dolby Digital, LPCM, ADPCM, DTS
.mp4
.m4v
.mov
Video
H.264/AVC, MPEG-4, HEVC
Audio
Dolby Digital, Dolby Digital Plus, AAC, MPEG-1
Layer III (MP3), Dolby AC-4
.3gp
.3g2
Video
H.264/AVC, MPEG-4
Audio
AAC, AMR-NB, AMR-WB
Video
MPEG-2, MPEG-4, H.264/AVC, VP8, VP9, HEVC
Audio
Dolby Digital, Dolby Digital Plus, AAC, PCM, DTS,
MPEG-1 Layer I, II, MPEG-1 Layer III (MP3)
.ts
.trp
.tp
.mts
Video
H.264/AVC, MPEG-2, HEVC
Audio
MPEG-1 Layer I, II, MPEG-1 Layer III (MP3), Dolby
Digital, Dolby Digital Plus, AAC, PCM, Dolby AC-4
.mpg
.mpeg
.dat
Video
MPEG-1, MPEG-2
Audio
MPEG-1 Layer I, II, MPEG-1 Layer III (MP3)
Video
MPEG-1, MPEG-2
Audio
Dolby Digital, MPEG-1 Layer I, II, DVD-LPCM
Video
RV30, RV40
Audio
Realaudio6 (cook), AAC LC, HE-AAC
.avi
.mkv
.vob
.rm
.rmvb
• rm, rmvb: This feature is available in certain countries only.
• Dolby AC-4: This feature is available in certain models only.
ENGLISH
Video
.asf
.wmv
36
Cautions for Video Playback
ENGLISH
• Some user-created subtitles may not work properly.
• A video file and its subtitle file must be located in the same folder. For subtitles
to be displayed properly, make sure that the video file and the subtitle file have
the same name.
• Subtitles on a Network Attached Storage (NAS) device may not be supported
depending on the manufacturer and model.
• Streams that include Global Motion Compensation (GMC) and Quarterpel
Motion Estimation (Qpel) are not supported.
• Playable file sizes may vary depending on the encoding conditions.
• Only Window Media Audio V7 and later are supported.
• The AAC main profile is not supported.
• Video files created by some encoders may not be played.
• Video files in a different format than specified may not be played properly.
• Video files stored on a USB storage device that does not support High Speed
may not be played properly.
• DTS codecs are supported only for playbacks of USB and HDMI video files.
37
[Music]
Playing Music
1
2
3
4
Press the
button on your remote control.
Launch the [Music] application.
Select your desired storage device.
You can select your desired songs from all of your storage devices and add
them to [MY PLAYLIST].
Select your desired music content and enjoy it.
1 2 345
Description
1
Select the desired type of content list.
2
Select and delete content.
(Files shared from other devices cannot be deleted.)
3
Select content and add it to [MY PLAYLIST].
4
Open the music player.
5
Launch [SEARCH].
• If the number of all content is more than 5,000, some content may not be listed
up.
ENGLISH
You can listen to music by using the [Music] app.
38
Using the Music Player
The music player lets you choose music from other apps and use it as background
music.
ENGLISH
1 2 3 4 5 6
7
Description
1
You can play music from the selected storage device.
2
You can set repeat playback and random playback.
3
You can listen to music with the screen turned off.
39
Description
You can change the position of the music player.
5
You can minimize the music player.
6
This feature closes the music player.
7
Lyrics are available for music files that provide them.
In some music files, you can choose a lyric section and move the
playback position.
• The lyrics feature is only supported on some devices.
• The lyrics may not be displayed in sync depending on the lyrics data
in the music file.
• Reopen your music player by pressing the
buttons on your remote
control.
• You may not be able to use the music player for some features.
ENGLISH
4
40
Audio Format
File Format
ENGLISH
.mp3
.wav
.ogg
.wma
.flac
Item
Info
Bit rate
32 kbps ~ 320 kbps
Sample freq.
16 kHz ~ 48 kHz
Support
MPEG-1, MPEG-2
Channels
mono, stereo
Bit rate
-
Sample freq.
8 kHz ~ 96 kHz
Support
PCM
Channels
mono, stereo
Bit rate
64 kbps ~ 320 kbps
Sample freq.
8 kHz ~ 48 kHz
Support
Vorbis
Channels
mono, stereo
Bit rate
128 kbps ~ 320 kbps
Sample freq.
8 kHz ~ 48 kHz
Support
WMA
Channels
up to 6 ch
Bit rate
-
Sample freq.
8 kHz ~ 96 kHz
Support
FLAC
Channels
mono, stereo
• The number of supported channels may vary depending upon the sample
frequency.
41
[File Viewer]
Viewing Files
1
2
3
4
Press the
ENGLISH
You can see document files stored on a connected device.
button on your remote control.
Launch the [File Viewer] application.
Select your desired storage device.
Select and view your desired document file.
1 2
Description
1
Select your desired type of content and viewing method.
Select and delete your desired content.
(You cannot delete files that are shared from other devices.)
• Certain content may not be displayed on the list if the number of all content
exceeds 40,000.
2
42
Browsing File Viewer
ENGLISH
1 2 3
4 5 6
Description
1
Returns to the entire content list.
2
Moves to the page you specify.
3
Sets the slide show.
4
Enlarges or reduces the document.
5
Starts the slide show.
6
Rotates the document.
7
Sets up the options of File Viewer.
7
43
Supported File Formats
File Extension
XLS, XLSX
PPT, PPTX
Microsoft Office 97/2000/2002/2003/2007/2010/
2013/2016 version
TXT
-
PDF
Adobe PDF 1.0/1.1/1.2/1.3/1.4 version
HWP
Hangul 2007 version
• File Viewer realigns a document, so it may look different from what is displayed
on a PC.
• For documents that include images, the resolution may look lower during the
realigning process.
• If the document is large or has many pages, it may take longer to load.
• Unsupported fonts may be replaced by other fonts.
• The file viewer may not open for Office documents that contain many high
resolution images. In that case, reduce the image file size, save it on a USB
storage device and run the file viewer again or connect your PC to the projector
and open the file on your PC.
ENGLISH
DOC, DOCX
Supported Version
44
Connecting USB
Connect a USB storage device (USB HDD, USB Flash Drive) to the USB port on
the projector to enjoy the content files stored on the USB storage device on your
projector.
ENGLISH
USB Flash Drive
45
Tips for Using a USB storage device
ENGLISH
• A USB storage device that has a built-in automatic recognition program or uses
its own driver might not be recognizable.
• Some USB storage devices may not be supported or may not work properly.
• If you use a USB extension cable, the USB storage device may not be recognized
or may not work properly.
• Please use only USB storage devices formatted with the FAT32 or NTFS file
system provided by Windows OS.
• It is recommended that you use an external USB HDD with a rated voltage of 5
V or less and a rated current of 500 mA or less.
• It is recommended that you use a USB hub or hard disk drive with a power
supply. (If the power supplied is not sufficient, the USB storage device may not
be detected properly.)
• It is recommended that you use a USB flash drive of 32 GB or less or a USB HDD
of 2 TB or less.
• If a USB HDD with power-saving function does not work, turn the hard drive off
and on again to make it work properly. See the owner’s manual for the USB HDD
for more information.
• Data on a USB storage device may be damaged, so it is recommended that you
back up any important files. Users are responsible for data management. The
manufacturer bears no responsibility.
• Select the connected USB from [INPUTS] and select the [EJECT] button to
disconnect the USB storage device.
If you disconnect the USB storage device without selecting [EJECT], an error
may occur in your projector or storage device.
You can open [INPUTS] by selecting
(INPUT) [All Inputs].
• For more information on other connection methods, go to
[Device
Connector].
• Select the connected USB from [INPUTS] and select the [FORMAT] button to
format the USB storage device. After format, all the data of USB storage device
will be deleted and formatted as NTFS or FAT32 file system.
• When connecting a USB storage device, a random file/folder can be created to
provide Smart projector services such as the saving and retrieving of thumbnail
images.
46
Share Smart Phone
Content Share with Smartphone
ENGLISH
Content Share allows you to enjoy videos, music, and photos saved on your
Smartphone that is connected to the same network.
Connecting to a smartphone with your projector
1
2
3
4
Press the
button on the remote control.
Launch the [Device Connector] application.
Select the [Smartphone].
Follow instructions in [Device Connector].
47
Matters that require special attention during Content Share
ENGLISH
• Check your network settings if the Content Share option does not work
properly.
• May not work properly on a wireless network. It is recommended that you
connect to a wired network.
• May not work properly depending upon the network environment.
• If multiple display devices are connected to one device, the content may not be
played properly depending upon server performance.
• To watch the 1080p video through Content Share function, a router that uses
5 GHz frequency is required. If a 2.4 GHz router is used, the video may not play
properly.
• Captions are only supported on some connected devices.
• When a subtitle file is added later, disable the shared folder and then enable it
again.
• The DRM files in the connected device will not play.
• Even for the file format supported by the projector, the supported file format
may differ depending upon the connected device environment.
• If there are too many folders or files in a folder, it may not work properly.
• The information on the file imported from the connected device may not be
displayed correctly.
• Depending upon the encoding, some streams may not play in Content Sharing
mode.
48
Share Smartphone Screen
To see the Mobile Device's screen on the projector
ENGLISH
1
2
3
4
5
•
•
•
•
•
•
Enable Miracast mode on the mobile device.
Your projector will be displayed in the list of available devices.
Select your projector and request connection.
To start the connection; a message saying “Connecting...” will appear.
After the connection is established, the projector will display the screen of the
connected device.
Always update your device to be connected to your projector to the latest OS
version for a reliable connection.
A non-LGE device might not connect even when it is detected.
Connect the device to a 5 GHz router because the performance may be affected
by your wireless environment.
The response rate may vary, depending upon the user’s environment.
It differs among devices. For more information on the device you want to
connect to, refer to its user guide.
If connection fails repeatedly, turn off the projector and the device you want to
connect to, then turn them back on and try again.
49
Share Computer Content
What Is Content Share?
Play the content with sharing software on the PC
If you have Windows 7 or later installed on your PC, you can play music, video,
photos, etc. on your projector without needing to install a separate program.
1
2
Connect you projector and PC to the same network. PCs installed with
Windows 7 or later also need to be connected to a network.
Right-click the desired music/video/photo file you wish to play, then select
your model using the “Play To” feature built into Windows 7 or later to play
the file.
To play on other devices like your mobile phone, refer to the relevant user
guide.
• Even when multiple projectors or devices are connected, the selected file is
played through only one device. The playback rate may vary depending on the
network connection.
ENGLISH
Content Share allows you to enjoy videos, music and photos saved on your PC.
50
Use the SmartShare PC Software to play the content saved on the PC
You can use SmartShare PC Software to connect the music/videos/photos saved
on the PC to your home network and play them on your projector.
1
ENGLISH
2
3
4
Configure the projector and PC installed with SmartShare on the same
network.
• The SmartShare service is only available when the projector and server PC
are connected to a single router.
Download and install SmartShare PC Software from the LG website. Before
installation, exit all programs running on the PC, such as a firewall or an antivirus software.
Run SmartShare PC Software and configure the share settings.
Shared videos and photos are played from the [Photo & Video] app on the
projector. Shared music files are played from the [Music] app on the projector.
• The server should be running in order to watch the shared file on your projector.
• You can check the website information from
[Device Connector] [PC]
[CONTENT SHARE].
• For information on how to use the SmartShare PC Software, refer to the
software’s help section.
51
Matters that require special attention during Content Share
ENGLISH
• Check your network settings if the Content Share option does not work
properly.
• May not work properly on a wireless network. It is recommended that you
connect to a wired network.
• If multiple display devices are connected to one device, the content may not be
played properly depending on server performance.
• May not work properly depending on the network environment.
• To watch the 1080p video through Content Share function, a router that uses
5 GHz frequency is required. If a 2.4 GHz router is used, the video may not play
properly.
• The Content Share function may not be supported for a router that does not
support multi-cast. For more information, refer to the user guide that came with
your router or contact the manufacturer.
• Captions are only supported on some connected devices.
• SmartShare PC Software is recommended for reading captions.
• When a subtitle file is added later, disable the shared folder and then enable it
again.
• The DRM files in the connected device will not play.
• Even for the file format supported by the projector, the supported file format
may differ depending on the connected device environment.
• If there are too many folders or files in a folder, it may not work properly.
• The information on the file imported from the connected device may not be
displayed correctly.
• Depending upon the encoding, some streams may not play in Content Sharing
mode.
52
Share Computer Screen
To see the PC screen on the projector
ENGLISH
Connect wireless
1
2
3
4
5
•
•
•
•
•
•
•
•
Press the
button on the remote control.
Run the [Screen Share] app.
Launch Miracast on the PC. Your projector will be displayed in the list of
available devices.
Select your projector and request connection.
After the connection is established, the projector will display the screen of the
connected device.
Always update your device to be connected to your projector to the latest OS
version for a reliable connection.
It is recommended that you use this function at close range.
Though it can be connected without a wireless router, connecting your device
to a 5 GHz router is recommended because the performance can be affected by
the surrounding wireless environment.
It supports the connection over the Intel® WiDi 3.5 version.
The response rate may vary, depending upon the user’s environment.
It’s different from Windows version. For more information on the device you
want to connect to, refer to its user guide.
For more information, refer to the [Screen Share] app.
If connection fails repeatedly, turn off the projector and the device you want to
connect to, then turn them back on and try again.
Connect wired
Connect the PC with projector by HDMI cable.
53
BENEFITS OF SMART PROJECTOR
Zooming in the Projector Display
7
6
5
4
1
3
2
Description
1
The original screen before enlargement is displayed on the subscreen.
2
This indicates the enlarged area that is displayed on the main screen.
3
You can zoom in and out on the main screen using the magnification
bar. You can adjust the magnification by scrolling with the
Wheel
(OK) button on the Magic Remote.
4
You can hide the sub screen.
ENGLISH
By zooming in the projector screen, you can view images in a larger size than the
originals.
Press the
button on your remote control while watching projector or in
video playback. You can also press the [START LIVE ZOOM] button in the lowerright corner of the screen.
54
Description
ENGLISH
5
You can capture your current screen.
You can view captured images in the [Photo & Video] app.
6
You can pause or resume your current screen.
7
Close the function and return to the original screen.
• To exit the feature and return to the original screen, press
• If you run another app on an enlarged screen, the feature closes.
or
.
Moving the Position of an Enlarged Screen
• Method 1. On the main screen, move the pointer on the Magic Remote to your
desired position and press
Wheel (OK) button. The position you select will
move to the center of the screen.
• Method 2. Drag the main screen using the Magic Remote’s pointer to the
desired position.
• Method 3. On the subscreen, select the area you want to enlarge using the
Magic Remote.
• Method 4. Using the pointer on your Magic Remote, drag the enlarged area on
the subscreen into your desired position.
• You can also move the screen using the / / / buttons on your remote
control.
55
Enjoying Internet
Using the [Web Browser]
1
2
Press the
button on the remote control.
Launch the [Web Browser] application.
1 2
3 4
6 7
5
Description
1
You can add the current page to the Home screen, or add or delete
the current page in [Bookmarks].
(A page added to the home screen can only be deleted on the home
screen. In this case, it is not deleted from [Bookmarks].)
2
Reloads the current page.
3
You can turn on/off Mini TV.
ENGLISH
You can enter the website when you input the web address on the URL bar. If you
input the search word, it will find the information about search word base on the
search engine.
56
Description
Zooms in or out of the screen.
5
[History] : You can open or delete the history list.
[Bookmarks] : You can open or delete the bookmark list.
[Settings] : You can configure simple settings for the browser.
[Encoding] : You can change the language when the content is not
properly displayed on the web page.
6
You can use the browser in full screen mode. To go back to the original
screen, use the Remote Control to move the pointer to the top of the
screen. [Exit Full Screen] will display.
7
Exit the [Web Browser].
ENGLISH
4
• The [Web Browser] supports only HTML5 media, it does not support Flash
Plug-in.
• The [Web Browser] does not support plug-in installation.
• On the [Web Browser], it may not be possible to play media files in formats
other than JPEG/PNG/GIF
• The [Web Browser] may be closed if there is insufficient memory space.
• On the [Web Browser], only fonts embedded in the projector are used.
Therefore, text may be displayed in different fonts than the ones on the PC.
• The [Web Browser] does not support file and font downloads.
• Since the [Web Browser] is a projector browser, it may function differently than
PC browsers.
• Since the [Web Browser] is a projector browser, some of the content may not
play properly.
• Caution is required for children accessing inappropriate content since this
product can be connected to the Internet.
• Access to some of the apps, including the Web Browser, may be restricted in
order to block inappropriate online content.
• Configure the settings in
(Q. Settings)
[Safety] [Application
Locks].
57
Setting the [Web Browser]
ENGLISH
Press
at the top of the screen and select the [Settings].
• [On Startup]
You can set the startup page of the browser to [Open the New Tab page]/
[Continue where I left off]/[Home page:].
• [Search Engines]
You can select the default search engine.
• [Recommended Sites]
You can change the settings so that [Recommended Sites] are displayed.
The [Recommended Sites] and [Most Visited Sites] are displayed on a new tab.
The [Recommended Sites] may not be available in your country.
To hide the [Recommended Sites], choose [Off] in [Settings].
• [Always Show Bookmarks Bar]
You can change the settings so that the [Bookmarks] bar is always displayed.
• [Private Browsing]
You can configure the settings not to leave records after searching.
• [Site Filtering]
To use the [Site Filtering] function, you should enter the projector password.
The initial password is set as “0000”.
-- [Approved Sites] : You can configure the settings to open the previously
registered web pages only.
-- [Blocked Sites] : You can configure the settings to block specific websites.
• [Pop-up Blocker]
You can block pop-ups using the settings.
• [Do Not Track]
You can request your visit history not be recorded in the server.
• [Adaptive Streaming using JavaScript]
If this is set to [Off], the resolution of the videos played in Web Browser is
limited to 720p.
58
Playing Sound from a Smart Device through the
Projector’s Speakers
Connect a smart device to the projector via Bluetooth to play sound from the
smart device through the projector’s speakers.
ENGLISH
1
2
3
4
Press the
button on the remote control.
Launches [Bluetooth Audio Playback].
Turn the smart device’s Bluetooth on, then select the projector from the list
of devices.
The projector will be connected to the smart device.
59
Notifications
Using [Notifications]
1
2
Press the
button on the remote control.
Launch the [Notifications] application.
3
4
2
1
Description
1
You can delete notifications.
2
For notifications with long content, press [more] to open them in full
view.
3
You can delete all notifications.
4
You can launch the APP or move to URL.
ENGLISH
The [Notifications] transfers real-time notifications from various apps and LG
services. It shows the status of apps that are currently running and allows you to
view, delete, and run all notifications in one place.
60
TOUR LIST OF SETTINGS
The options may differ depending on the model.
ENGLISH
Quick Settings
To use Setting function quickly
Press the
(Q. Settings) button on the remote control.
Displays a set of light-weight controls quickly and simply such as [Picture Mode],
[Aspect Ratio], [Sound Out] and so on.
1
2
3
4
5
6
7
8
Description
1
Closes the Quick settings.
2
You can set the [Picture Mode].
3
You can set the [Aspect Ratio].
4
You can choose the [Sound Out].
5
You can set the [Sleep Timer].
6
You can set the [PJT Mode].
7
Allows you to view connected [Network].
8
You can set more options.
61
[Picture] Settings
[Picture Mode]
ENGLISH
(Q. Settings)
[Picture] [Picture Mode Settings] [Picture Mode]
Select the picture mode that is best suited to your viewing environment,
preferences or video type.
The options may differ depending on the model.
Depending upon the input signal, the available picture modes may be different.
When watching online service content, the Picture Mode may be changed to
match the content being shown.
• [Vivid]
Sharpens the image by increasing the contrast, brightness, and sharpness.
• [Standard]
Displays the picture with normal contrast, brightness, and sharpness levels.
• [Cinema]
Optimizes the screen for movies.
• [Sports]/[Cricket]
Optimizes the screen for sports games. Sharpens the image of rapid movements
such as kicking or throwing a ball.
-- The name of the sport may differ depending on region.
• [Game]
Optimizes the screen for gameplay.
• [Expert (Bright Room)]/[Expert (Dark Room)]
Allows an expert, or anyone who loves picture quality, to tune to the best picture
quality.
62
[Picture Mode Settings]
ENGLISH
(Q. Settings)
[Picture] [Picture Mode Settings]
This feature allows you to adjust the selected picture mode in detail.
• [Contrast]
Adjusts the contrast of the bright and dark areas of the picture. The closer to
100, the higher the contrast.
• [Brightness]
Adjusts the overall screen brightness. The closer to 100, the brighter the screen.
• [Sharpness]
Adjusts the sharpness of the image. The closer to 50, the sharper and clearer
the image.
• [Colour]
Tones down or up the colours displayed on the screen. The closer to 100, the
deeper the colour.
• [Tint]
Adjusts the colour balance between red and green displayed on the screen. The
closer to Red 50, the more red the colour will be. The closer to Green 50, the
more green the colour will be.
• [Colour Temperature]
Adjusts the colour temperature cool/medium/warm/natural.
-- The settings you specify only applies to the currently selected input mode.
To apply your current picture settings to all input modes, select [Apply to All
Inputs].
-- Depending upon the input signal or the selected picture mode, the available
options may differ.
• [Apply to All Inputs]
Save the current customized setting values to currently selected picture mode
for all inputs.
• [Reset]
This option will reset the picture settings.
-- You can reset the picture modes separately. Select the picture mode you
wish to reset and enable it.
63
[Advanced Controls]/[Expert Controls]
ENGLISH
Adjust screen settings for individual picture modes.
(Q. Settings)
[Picture] [Picture Mode Settings] [Advanced
Controls]
• [Dynamic Contrast]
Corrects the difference between the bright and dark areas of the screen for
optimal results depending on the brightness of the picture.
• [Dynamic Colour]
Adjusts the colour and saturation of the picture to make the image more
colourful and lively.
• [Preferred Colour]
Adjusts the colours of skin, grass and sky to your personal preferences.
• [Colour Gamut]
Selects the range of colours to display.
• [Super Resolution]
Adjusts the resolution to make dim and blurred images clearer.
• [Gamma]
Adjusts the medium brightness of the picture.
64
ENGLISH
(Q. Settings)
[Picture] [Picture Mode Settings] [Expert
Controls]
If you set the picture mode to Expert, you can set the following functions.
• [Dynamic Contrast]
Corrects the difference between the bright and dark areas of the screen for
optimal results depending on the brightness of the picture.
• [Super Resolution]
Adjusts the resolution to make dim and blurred images clearer.
• [Colour Gamut]
Selects the range of colours to display.
• [Colour Filter]
Filters a specific colour spectrum in RGB colours to fine-tune colour saturation
and hue accurately.
• [Gamma]
Adjusts the medium brightness of the picture.
• [White Balance]
Adjusts the overall colour temperature of the screen as desired.
• [Colour Management System]
This is a function used by experts when they adjust Colours using a test pattern
of six colours ([Red]/[Green]/[Blue]/[Cyan]/[Magenta]/[Yellow]) without
affecting other colour areas. For normal images, adjustments may not result in
noticeable colour changes.
-- Depending upon the input signal or the selected picture mode, the available
options may differ.
65
[Picture Options]
ENGLISH
(Q. Settings)
[Picture] [Picture Mode Settings] [Picture
Options]
Adjust detailed settings to further optimize the picture.
• [Noise Reduction]
Removes small dots that stand out so as to make the image clean.
• [MPEG Noise Reduction]
Reduces the noise produced during the creation of digital video signals.
• [Black Level]
Compensates the screen brightness and contrast by adjusting the darkness of
the screen.
• [TruMotion]
This feature is available on certain models only.
Optimizes the image quality of fast-moving pictures.
-- [Off]: Turns off the [TruMotion].
-- [Smooth]: Softens fast-moving pictures.
-- [Clear]: Makes fast-moving pictures clearer.
-- [User]: Sets [De-Judder]/[De-Blur] manually.
• [De-Judder]: Adjusts juddering on the screen.
• [De-Blur]: Reduces the blurring effects of motion.
• The advanced settings can be changed only in [User] mode.
• Depending upon the input signal or the selected picture mode, the available
options may differ.
• The configurable items differ depending upon model.
66
[Aspect Ratio]
ENGLISH
(Q. Settings)
[Picture] [Aspect Ratio Settings] [Aspect Ratio]
The options may differ depending on the model.
Depending upon the input signal, the available screen sizes may be different.
• [16:9]
Displays an aspect ratio of 16:9.
• [Original]
Changes the aspect ratio to 4:3 or 16:9 depending upon the input video signal.
• [4:3]
Displays an aspect ratio of 4:3.
• [Vertical Zoom]
You can adjust the vertical dimension of the screen and align the screen
vertically by using [Adjust Zoom Ratio] and [Adjust Screen Position].
• [All-Direction Zoom]
You can adjust the horizontal/vertical/diagonal dimensions of the screen and
align the screen horizontally/vertically by using [Adjust Zoom Ratio] and [Adjust
Screen Position].
[Just Scan]
(Q. Settings)
[Picture] [Aspect Ratio Settings] [Just Scan]
If you turn this feature [On], you can view the content in the aspect ratio that is in
content source. If the edge of the screen is not clean, please turn it [Off].
If set to [Auto], the feature switches between [On] or [Off] status depending on
the information contained in the video signal.
• The items that can be selected may vary depending on the current input.
67
[Energy Saving]
[Picture Test]
(Q. Settings)
[Picture] [Picture Test]
First of all, start the Picture Test to see whether the video signal output is normal,
and then select whether there is an error.
If there are no problems in the test picture, check the connected external device.
ENGLISH
(Q. Settings)
[Picture] [Energy Saving]
Reduces power consumption by adjusting peak screen brightness.
• [Minimum]/[Medium]/[Maximum]
Applies the pre-set [Energy Saving] mode.
68
[Sound] Settings
[Sound Mode]
ENGLISH
(Q. Settings)
[Sound] [Sound Mode Settings]
The options may differ depending on the model.
• [Standard]
Optimizes the sound for all types of content.
• [Cinema]
Optimizes the sound for cinemas.
• [Clear Voice III]
Boosts voice clarity.
• [Sports]/[Cricket]
Optimizes the sound for sports.
-- The name of the sport may differ depending on region.
• [Music]
Optimizes the sound for music.
• [Game]
Optimizes the sound for gameplay.
[Sound Mode]
69
[Sound Mode Settings]
ENGLISH
(Q. Settings)
[Sound] [Sound Mode Settings]
You can only use [Virtual Surround Plus], [Equalizer], and [Reset] if [Sound Mode]
is set to [Standard].
The options may differ depending on the model.
• [Sound Mode]
You can select the most suitable sound mode for each genre.
• [Balance]
You can adjust the volume of the left and right speakers.
• [Virtual Surround Plus]
Enjoy an immersive soundscape with the virtual multi-channel surround sound
effect.
• [Equalizer]
You can set the desired sound by adjusting the equalizer directly.
(100 Hz/300 Hz/1 kHz/3 kHz/10 kHz)
• [Reset]
You can reset the sound effect settings.
70
[Sound Out]
The options may differ depending on the model.
ENGLISH
Playing audio through the projector's internal speakers
(Q. Settings)
[Sound] [Sound Out] [Internal Projector
Speaker]
Audio is played through the projector’s internal speakers.
Connecting and Using an Audio Device Supporting Optical
(Q. Settings)
[Sound] [Sound Out] [Optical]
You can connect an audio device that supports [Optical] to the optical digital
audio output port to enjoy your projector’s sound in richer quality and greater
convenience.
• Only available for models with an optical digital port.
• You can use the projector remote control to adjust the volume of the connected
device.
Hearing Sound through an External Audio Device Connected via a HDMI (ARC)
Port
(Q. Settings)
[Sound] [Sound Out] [HDMI ARC]
Sound from the projector can be output through an external audio device
connected via a HDMI (ARC) port.
• Select [HDMI ARC] to automatically turn on SIMPLINK. Once SIMPLINK is turned
off, the output speaker settings automatically revert to the default settings for
uninterrupted audio output.
71
Sound Input
[Auto]
[PCM]
Digital Sound Output
MPEG
PCM
Dolby Digital
Dolby Digital
Dolby Digital Plus
(Optical) Dolby Digital
(HDMI ARC) Dolby Digital Plus
HE-AAC
Dolby Digital
DTS
DTS / PCM
DTS Express
DTS / PCM
DTS-HD MA
PCM / DTS
All
PCM
Connecting and Using an Audio Device Supporting LG Sound Sync
(Q. Settings)
[Sound] [Sound Out] [Optical] [LG Sound
Sync]
You can connect an audio device that supports [LG Sound Sync] to the optical
digital audio output port to enjoy your projector’s sound in richer quality and
greater convenience.
• Only available for models with an optical digital port.
• You can use the projector remote control to adjust the volume of the connected
device.
ENGLISH
Configuring digital sound output settings
(Q. Settings)
[Sound] [Sound Out] [Optical]/[HDMI ARC]
[Digital Sound Out]
You can configure the [Digital Sound Out] settings.
• These settings are available only when an [Optical]/[HDMI ARC] is selected.
72
ENGLISH
Connecting and Using an Audio Device Wirelessly
(Q. Settings)
[Sound] [Sound Out] [Bluetooth]
You can connect wirelessly a Bluetooth audio device or a Bluetooth headset to
enjoy your projector’s sound in richer quality and greater convenience.
• If you have recently connected device that the sound bar supports LG Sound
Sync, this feature automatically tries connecting to that device.
• In some devices, this feature automatically tries connecting to the recently
connected device when the projector is turned on.
• We recommend that you connect an LG audio device that supports LG Sound
Sync, using LG TV mode or LG Sound Sync mode on device.
• Press [DEVICE SELECTION] to view the connected devices or the devices that
can be connected to connect any one of them.
• You can use the projector remote control to adjust the volume of some
Bluetooth devices.
• If the device fails to connect, check the power of the device to connect to and
check if the audio device is working properly.
• Depending on the type of the Bluetooth device, the device may not connect
correctly or an abnormal behavior may occur such as unsynchronized video and
audio.
• Sound may stutter or sound quality may be reduced if:
-- the Bluetooth device is too far from the projector;
-- there are obstacles between the Bluetooth device and the projector; or
-- used together with radio equipment such as a microwave oven or wireless
LAN.
• If the [Picture Mode] is set to [Game] and [Sound Out] is set to [Bluetooth],
[Picture Mode] changes to [Standard].
• Using Bluetooth speakers that support Dual mode/Double mode/2-Channel
mode together with the Magic Remote may limit the speakers’ usability.
73
Playing audio through the projector’s internal speakers and external audio
device simultaneously
Audio can be played through multiple devices simultaneously.
• Using [Internal Projector Speaker + Optical]
(Q. Settings)
[Sound] [Sound Out] [Internal Projector
Speaker + Optical]
-- Audio is played through the projector’s built-in speakers and the audio device
connected to the digital optical audio output port simultaneously.
• Using [Internal Projector Speaker + Wired Headphones]
(Q. Settings)
[Sound] [Sound Out] [Internal Projector
Speaker + Wired Headphones]
Audio is played through the projector’s internal speakers and the [Wired
Headphones] simultaneously.
-- If you connect the wired headphones while the projector is powered on, it
automatically detects the wired headphones and redirects audio through
them.
-- This feature is only available in certain countries.
ENGLISH
Using Audio Out (Line Out)/Wired Headphones
(Q. Settings)
[Sound] [Sound Out] [Wired Headphones]
Select [Wired Headphones] to optimize audio output according to the device
connected.
• Some models may support the [Wired Headphones] function only.
• If you connect the wired headphones while the projector is powered on, it
automatically detects the wired headphones and redirects audio through them.
• This feature is only available in certain countries.
74
[Auto Volume]
(Q. Settings)
[Sound] [Auto Volume]
Click [On] to adjust the volume level automatically.
This feature is available on certain models only.
ENGLISH
[AV Sync Adjustment]
(Q. Settings)
[Sound] [AV Sync Adjustment]
Adjusts the synchronization of the sound from the speaker that is working.
The closer to (+), the slower the audio output.
If you select the [Bypass], Outputs the sound from external devices without any
audio delay. The audio may be output before the video because of the time the
projector takes to process the video input.
[Sound Test]
(Q. Settings)
[Sound] [Sound Test]
Start the [Sound Test] to check that the sound signal output is normal, and then
select whether there is an error.
If there are no problems in the test, check the connected external device.
• Sound test is possible by Internal projector Speaker only.
75
[Network]
[Projector Name]
[Wired Connection (Ethernet)]
(Q. Settings)
[Network] [Wired Connection (Ethernet)]
The projector will be connected automatically to the network if a cable connection
is established.
To change network connection settings, select [Edit] in Network Settings.
[Wi-Fi Connection]
(Q. Settings)
[Network] [Wi-Fi Connection]
If you have set up the projector for a wireless network, you can check and connect
to the available wireless Internet networks.
• [Add a hidden wireless network]
If you input the name of network directly, you can add a wireless network.
• [Connect via WPS PBC.]
Connects easily when the button of a wireless AP supporting PBC is pressed.
• [Connect via WPS PIN.]
Connects easily when the PIN of the wireless AP that you wish to connect to is
entered in to the AP configuration webpage.
• [Advanced Wi-Fi Settings]
If you input the information of network directly, you can enter a wireless
network.
ENGLISH
(Q. Settings)
[Network] [Projector Name]
You can use the screen keyboard to set the name for the smart projector to be
used on the network.
• Up to 30 characters can be entered using the English alphabet.
76
[Wi-Fi Direct]
ENGLISH
(Q. Settings)
[Network] [Wi-Fi Direct]
[Wi-Fi Direct] is a function that allows your projector to connect with a Wi-Fi
Direct-enabled device without a Wireless Router. You can open files stored on the
devices that are connected via Wi-Fi Direct in the [Photo & Video] app and the
[Music] app.
1
2
3
4
5
6
Enable Wi-Fi Direct on the device to which you want to connect.
A list of devices that can be connected to the projector is displayed.
Select a device to connect.
If the desired device accepts the request, Wi-Fi Direct will be connected.
From your desired connected device, select the video, music and photo files
that you want to open on your projector via the LG TV Plus app or the content
sharing feature.
You can open files stored on the devices that are connected via Wi-Fi Direct in
the [Photo & Video] app and the [Music] app.
• If a device that was previously connected to the projector sends a connection
request again, it will be connected automatically.
• If you launch the [Screen Share] app while Wi-Fi Direct is connected, Wi-Fi
Direct will disconnect.
[LG Connect Apps]
(Q. Settings)
[Network] [LG Connect Apps]
[LG Connect Apps] Provides apps, like photo sharing or mobile-device remotes,
with the ability to access and control certain features of your projector.
Set the [LG Connect Apps] option to [On]. (When you stop using it, please change
it back to [Off].)
• If you want to disconnect all devices from your projector, click the
[DISCONNECT ALL CONNECTIONS] on your screen.
77
[General]
[Language]
[Location]
(Q. Settings)
[General] [Location]
You can change the location setting of your smart projector.
You must set the country manually when you are not connected to the network.
The configurable items differ depending upon the country.
• [Service Area Postcode]
This function is used to set the receiving location of the projector by entering
your postcode.
-- This feature is available on certain models only.
• [LG Services Country]
If you don’t set the [Set Automatically], you can select the country manually.
ENGLISH
(Q. Settings)
[General] [Language]
You can choose the menu language displayed on the screen.
• [Menu Language]
You can select one of the menu languages to be displayed on the screen.
• [Keyboard Languages]
Select the language to use the on-screen keyboard.
78
[Time & Date]
ENGLISH
(Q. Settings)
[General] [Time & Date]
You can check or change the time while watching the projector.
• [Set Automatically]
Automatically sets the time displayed on the projector screen by network.
• [Time]/[Date]/[Time Zone]
You can set the time and date manually if the automatically set current time is
incorrect.
• [Custom Time Zone]
When select the [Custom] in [Time Zone], [Custom Time Zone] menu is
activated.
[Sleep Timer]
(Q. Settings)
[General] [Timers]
Sets the projector to turn off at a specified time.
If you want to disable [Sleep Timer], select [Off].
[Sleep Timer]
[Timer Power On]/[Timer Power Off]
(Q. Settings)
[General] [Timers] [Timer Power On]/[Timer
Power Off]
You can set the power on/off time for the projector.
Select [Off] if you are not going to set [Timer Power On]/[Timer Power Off].
• To use [Timer Power On]/[Timer Power Off], set the time correctly.
[Auto Off]
(Q. Settings)
[General] [Timers] [Auto Off]
If there is no input signal or button press, the projector automatically turns off
after the preset time has elapsed.
79
[Account Management]
(Q. Settings)
[General] [Account Management]
Manage your account information and settings.
• This feature is available on certain models only.
(Q. Settings)
[General] [Eco Mode]
Set power options to reduce energy consumption.
• [Auto Power Off]
Set the projector to turn off automatically when there has been no user input
for a specified amount of time.
• [HDD Eco Mode]
If you set the mode to [On], the USB HDD connected to the projector will go
into power-saving mode when it has been left unattended for an extended
period of time.
ENGLISH
[Eco Mode]
80
[Mobile Projector On]
ENGLISH
(Q. Settings)
[General] [Mobile Projector On]
If [Turn on via Wi-Fi] or [Turn on via Bluetooth] is set to [On], you can turn on
your projector using an application that supports [Mobile Projector On] or see the
screen of the application on your projector.
• The [Turn on via Wi-Fi] feature must be used in an app on a smart device that
supports the feature.
• The [Turn on via Bluetooth] feature can only be used with certain LG Electronics
smartphones.
• The projector should be connected to a network.
• The projector must be plugged in.
• The projector and the device to be used should be connected to the same
network.
• To connect for the first time, make sure the device to be used is ready to
connect.
• This function is available on certain models or in certain countries only.
[SIMPLINK (HDMI-CEC)]
(Q. Settings)
[General] [SIMPLINK (HDMI-CEC)]
You can conveniently control and use various multimedia devices connected
through HDMI with the projector remote control.
81
[Edge Adjustment]
[PJT Mode]
(Q. Settings)
[General] [PJT Mode]
This function turns the projected image upside down or flips horizontal.
[Auto Keystone]
(Q. Settings)
[General] [Auto Keystone]
This feature is available on certain models only.
[Auto Keystone] provides a rectangular screen image by automatically adjusting
the keystone number when there is a trapezoidal screen image caused by tilting of
the projector.
Use the [Edge Adjustment] (4 Corner Keystone) if you want a more accurate
calibration of the screen than the [Auto Keystone].
• [On]
Automatically adjusts the keystone number.
• [Off]
Manually adjusts the keystone number.
ENGLISH
(Q. Settings)
[General] [Edge Adjustment]
[Edge Adjustment] (4 Corner Keystone) adjusts the horizontal and vertical sides
of the projected image if the projector is at an angle and not perpendicular to the
screen. This feature ensures the shape of the projected image is not distorted.
Use this feature only when the projector cannot be set up at the optimal angle.
[Edge Adjustment] may result in a loss of image quality.
• The value range of [Edge Adjustment] is as follows.
-- [Top Left] (H: 0 to 100, V: 0 to 100)
-- [Top Right] (H: -100 to 0, V: 0 to 100)
-- [Bottom Left] (H: 0 to 100, V: -100 to 0)
-- [Bottom Right] (H: -100 to 0, V:-100 to 0)
82
[Auto Power]
ENGLISH
(Q. Settings)
[General] [Auto Power]
Makes the projector turn on automatically when the power cord is connected to
the projector.
• [On]
When the power code is connected to the projector, it turns on automatically.
• [Off]
When the power code is connected to the projector, it goes into standby mode.
[High Altitude]
(Q. Settings)
[General] [High Altitude]
If the projector is used at an altitude higher than 1200 meters, turn this on.
Otherwise, the projector may overheat or its protection function may be activated.
If this happens, turn the projector off and then on again after waiting for several
minutes.
• This feature is available on certain models only.
[LG Wireless Keyboard]
(Q. Settings)
[General] [LG Wireless Keyboard]
This feature enables you to connect a LG wireless keyboard to your device.
Turn on the device, set it to pairing mode, and then click [CONNECT] on your
projector screen.
• Supported keyboard
-- LG Rolly Keyboard
• If there is a LG wireless keyboard previously connected, it will be automatically
reconnected to your projector once your projector turns on.
• To disconnect the existing connection, click [DISCONNECT].
• This feature is available on certain models only.
83
[Settings Help]
(Q. Settings)
[General] [Settings Help]
If you select the setting menus, you will see the hints of the settings. Turn on/off
description box in settings.
(Q. Settings)
[General] [Screen Saver]
When the currently displayed app has not received any user input for an hour, it
will be replaced by a [Screen Saver].
[Reset to Initial Settings]
(Q. Settings)
[General] [Reset to Initial Settings]
Return projector to its initial settings. This will revert all settings to their default
values.
After reset, the projector will automatically turn off and on.
• If [Safety] is set to [On], you should type the password to [Reset to Initial
Settings].
• Do not turn off the power during initialization.
• We recommended that you reset the projector to [Reset to Initial Settings]
before you sell it or transfer it to a third party.
[About This Projector]
(Q. Settings)
[General] [About This Projector]
You can check the information about Customer Services. (Software Update,
projector Information, and so on.)
ENGLISH
[Screen Saver]
84
[Self Diagnosis]
(Q. Settings)
[General] [Self Diagnosis]
Troubleshoots functional problems that can arise while using the product.
ENGLISH
[User Agreements]
(Q. Settings)
[General] [User Agreements]
Review legal documents and accept or decline their terms of service.
[Legal Notice]
(Q. Settings)
Review legal notice.
[General]
[Legal Notice]
[Home/Store Mode]
(Q. Settings)
[General] [Home/Store Mode]
You can choose between [Home Mode] and [Store Mode].
To use the projector at home, select [Home Mode].
[Store Mode] only when the projector will be displayed in store. Select the Store
mode for settings optimized for store display.
85
[Safety] Settings
[Application Locks]
(Q. Settings)
[Safety] [Application Locks] Select the
Applications to lock.
You can lock or unlock the application.
• The lock function is not immediately available for the currently running
application.
[Input Locks]
(Q. Settings)
[Safety] [Input Locks]
You can lock or unlock the Input Locks.
Select the Inputs to lock.
[Reset Password]
(Q. Settings)
[Safety] [Reset Password]
Set or change the password for the projector.
Resetting a Lost Password
If you lose the password you set, you can reset it as follows:
1
2
3
Press the
(Q. Settings) button on the remote control and move the focus
to
[Safety] [Reset Password].
Press
password input window will appear.
on the remote control. The master
Enter the numbers “0313” in the master password input window, then press
[Enter]. The password will be reset.
ENGLISH
• Set [Safety] to [On].
• The initial password is set as “0000”.
When France is selected for Country, password is not “0000” but “1234”.
• The configurable items differ depending upon model.
86
[Accessibility]
[Pointer Options]
ENGLISH
(Q. Settings)
[Accessibility] [Pointer Options]
You can set the pointer speed and shape you want while it is on the screen.
[Menu Transparency]
(Q. Settings)
[Accessibility] [Menu Transparency]
By setting this feature to [On], you can make some of the menus (e.g. Live Menu,
Search, Screen Remote, etc.) transparent.
[High Contrast]
(Q. Settings)
[Accessibility] [High Contrast]
When this feature is set to [On], it adjusts the background of some of the menus
on the screen and font colours to highlight the contrast between the light and dark
areas.
• The effect will disappear temporarily when you configure the [Picture Mode] or
[Aspect Ratio] settings.
87
TO UPDATE SOFTWARE
Uses software update to check and obtain the latest version.
(Q. Settings)
[General] [About This Projector]
[Allow
Automatic
Updates]
Description
When checking for the latest update version, you can
perform updates only if an update file of a later version is
available.
The projector automatically checks your software version
but, if necessary, you can perform a manual check.
If [Allow Automatic Updates] is selected, when an update
is available, the update automatically starts without
prompting a question.
If [Allow Automatic Updates] is not selected, when an
update is available, the update will start after prompting
a question.
• The configurable items differ depending upon country.
• The latest version can be obtained via internet connections.
• If software is not updated, certain functions may not work properly.
ENGLISH
Menu
[CHECK FOR
UPDATES]
88
TROUBLESHOOTING
ENGLISH
If you experience any of the problems below while using the product, please check
the following. There may be no problem with the product.
Information on customer service for product problems is available in
(Q.
Settings)
[General] [About This Projector] on the projector.
Abnormal Operation
The screen does not appear for some time after power-on.
• This is because there is a noise-removal process to eliminate any possible noise
that may appear during power-on. This does not mean the product is defective.
The pointer of Magic Remote is not appear in the screen.
(Depending on country)
• Your Magic Remote may have run out of batteries.
Replace the batteries and register your Magic Remote again following the
instructions shown in MAGIC REMOTE CONTROL of Owner’s Manual.
• This only applies to models that support the Magic Remote.
I cannot turn on the Projector.
• Please make sure your projector power plug is correctly connected to the outlet.
• If you are using a multi-outlet, check if it is working properly.
• Try to power on using the button on your projector set.
It says there is no signal on the screen.
• Make sure that the HDMI cable is correctly connected to your projector.
• Go to
to choose the connected input.
• Check if your external device, such as set-top box or Blu-ray player, is turned on.
It does not work when I connect a USB device.
• Check that the USB and USB cable versions are 2.0 or higher.
89
Screen Problems
The screen shakes after the momentary appearance of vertical/horizontal lines
and net pattern.
• Stop using items such as wireless telephones, hairdryers, electrical drills etc.
The problem is caused by high-frequency electronic devices such as another
projector or strong electromagnetic sources.
I see vertical lines in all four directions on the screen, or colours are blurred
when I try to connect to HDMI.
•
(Q. Settings)
[Picture] [Aspect Ratio Settings] [Just Scan]
Set [Just Scan] to [Off].
[Just Scan] shows you the original image as it is. You may see noise in all four
directions on the screen if the signal contains noise.
The screen is blank or the image is blurred when an HDMI cable is used.
• Check that the HDMI® cable meets the required standards. If it is not a certified
HDMI® cable, the screen may flicker or may not display anything.
• Check that the cable is properly connected. Improper connection may cause
screen flicker.
ENGLISH
First of all, perform a
(Q. Settings)
[Picture] [Picture Test] for
check any abnormalities in the projector.
If you are using a set-top box, turn it off, and then turn it back on.
Make sure that the set-top box is correctly connected to your projector.
90
Sound Problems
ENGLISH
First of all, perform a
(Q. Settings)
[Sound] [Sound Test] to
check for any abnormalities in the projector.
If you are using a set-top box, turn it off, and then turn it back on.
Make sure that the set-top box is correctly connected to your projector.
The screen is fine, but it does not play any sound.
•
(Q. Settings)
[Sound] [Sound Out]
Check whether the [Sound Out] is set to [Internal Projector Speaker + Optical]
or [Internal Projector Speaker].
If you use a set-top box, there will be no sound if you have set the volume of
the set-top box or your projector to 0 or enabled Mute. Set the volume to an
appropriate level.
The sound does not play when I connect to the HDMI/USB port.
• Check that you are using a high-speed HDMI® cable.
• Check that the USB and USB cable versions are 2.0 or higher.
• Use a normal music file (*.mp3, *.wav, *.ogg, *.wma).
91
PC Connection Problems
The sound does not play when the PC is connected with an HDMI cable.
• Contact your video card manufacturer to check the HDMI audio output. (Video
cards designed for use with DVI format files need to be connected separately
with an audio cable.)
The screen is cut off or moved to one side after it is connected to a PC.
• Set to a resolution that supports the PC input. (Reboot your PC after changing
the resolution.)
ENGLISH
The screen remains blank after it is connected to a PC.
• Check that the PC is properly connected to the projector.
• Turn the projector off and back on using the remote control.
• Restart the PC with the projector on.
• Check that the current screen resolution supports the PC input.
• To use dual monitors, check that the PC or notebook supports dual-monitor
mode.
• Reconnect the high speed HDMI cable.
• When the RGB output port of the PC is connected to the HDMI input port of
the projector, use RGB-to-HDMI gender.
You will not see anything on the screen if you use an HDMI to RGB gender.
92
[Photo & Video] Movie Playback Problems
For more information about supported files, see “PLAY OTHER DEVICE FILES”.
ENGLISH
I cannot find a file in the [Photo & Video].
• Check that the files on the USB storage device can be read by a PC.
• Check that the file extension is supported.
I get a message saying “This file is not supported” or the sound is playing
normally but the video is not.
• Check that the file plays without any problems on a PC’s video player. Also check
for file damage.
• Check that the file extension is supported.
• Check that the resolution is supported.
• Check that the video codec is supported.
• Check that the frame rate is supported.
I get a message saying “This audio is not supported” or the video is playing
normally but the audio is not.
• Check that the file plays without any problems on a PC’s video player. Also check
for file damage.
• Check that the file extension is supported.
• Check that the audio codec is supported.
• Check that the bit rate is supported.
• Check that the sample rate is supported.
• Check that the audio channel separation is supported.
93
ENGLISH
I cannot see the subtitles.
• Check that the file plays without any problems on a PC’s video player. Also check
for file damage.
• Check that the video and subtitle files have the same name.
• Also check that both the video file and the subtitle file are in the same folder.
• Check that the subtitle file format is supported.
• Check that the language is supported. (You can check the language of the
subtitle file by opening the file in the Notepad.)
• If subtitles encoding is incorrectly set, subtitles may not be displayed properly.
Select
in the control panel at the bottom of the video playback
screen and change the [CODE PAGE] value.
• If you play a video file stored on another device by using the content sharing
feature, subtitles may not be available depending on the program you use.
94
Network Connection Problems
ENGLISH
You can check the network connection status as shown below.
•
(Q. Settings)
[Network] [Wired Connection (Ethernet)]
•
(Q. Settings)
[Network] [Wi-Fi Connection] [Advanced Wi-Fi
Settings]
When X appears next to projector
• Check the projector or the AP (Router).
• Check the connection status of the projector, AP (Router) and Cable Modem.
• Power off and power on in the following order;
1. The Cable Modem, wait for the Cable Modem to reset.
2. The AP (Router), wait for the AP (Router) to reset.
3. The projector.
• If you are using a wireless connection, change the SSID (Network name) and
wireless channel of AP (Router).
• If you are using a static IP, enter the IP directly.
• Contact internet service provider or AP (Router) companies.
When X appears next to Gateway
• Check the AP (Router) or consult your Internet service provider.
• Unplug the power cord of the AP (Router), Cable Modem, wait 10 seconds.
Reapply power.
• Initialize (Reset) on the AP (Router) or Cable Modem.
• Contact internet service provider or AP (Router) companies.
• Check the AP (Router) manufacturer’s website to make sure your router has the
latest firmware version installed.
95
When X appears next to DNS
ENGLISH
• Check the AP (Router) or consult your Internet service provider.
• Unplug the power cord of the Cable Modem or the AP (Router), wait 10
seconds. Reapply power.
• After the Cable Modem or AP (Router) has Initialized (Reset), try to reconnect.
• Check that the MAC address of the projector/AP (Router) is registered with
your Internet service provider. (The MAC address displayed on the pane of
the network status window should be registered with your Internet service
provider.)
96
LG Account Problems
In some countries, access to the website (www.lgappstv.com) may be restricted.
ENGLISH
I have already signed up on the projector. Do I still have to sign up again at the
website (www.lgappstv.com)?
• If you have already signed up on your projector, you do not have to sign up
again on the website. You can sign into the website by using the same ID
and password and entering the additional information to complete the email
verification process.
Is it possible for the family members to use different IDs on the same
projector?
• You can register multiple IDs per projector.
I forgot my ID/Password. What should I do?
• You can initialize the password through E-mail when you select FORGOT
PASSWORD? on the sign in screen.
• If you signed up on a PC, you can find your ID/Password on the website (www.
lgappstv.com).
97
Contents Problems
Internet Browser Problems
Some parts of a particular website are not visible when I am using the Internet.
• The [Web Browser] supports only HTML5 media and not Flash Plug-in.
• The [Web Browser] does not support plug-in installation.
• On the [Web Browser], it may not be possible to play media files in formats
other than JPEG/PNG/GIF
• You cannot save attachments or images.
The Internet browser automatically shuts down when I visit a website.
• The Internet browser may be forced to shut down if the available memory size is
not sufficient to accommodate the image information for a website.
ENGLISH
I cannot see any content in HOME.
• This feature is available in certain countries only.
You may not be able to see the content if the service country setting has been
changed. Change to the service country you are going to use the service from in
(Q. Settings)
[General] [Location] [LG Services Country].
• You may not be able to view content that has been deleted. Please reinstall the
appropriate app.
• The type of supported content differs by country.
• The content offerings are subject to change or interruption by the service
provider.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising