BD360-P-BISRBLK-ENG 9/17/09 11:41 AM Page 1 ENGLISH BD360 As an ENERGY STAR® Partner, LG has determined that this product or product models meet the ENERGY STAR® guidelines for energy efficiency. ENERGY STAR® is a U.S. registered mark. P/NO : MFL57982671 BD360-P-BISRBLK-ENG 9/17/09 11:41 AM CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. WARNING: Do not install this equipment in a confined space such as a book case or similar unit. CAUTION: Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from over heating. The openings shall be never be blocked by placing the product on a bed, sofa, rug or other similar surface. This product shall not be placed in a built-in installation such as a bookcase or rack unless 2 Page 2 proper ventilation is provided or the manufacturer's instruction has been adhered to. CAUTION: This product employs a Laser System. To ensure proper use of this product, please read this owner’s manual carefully and retain it for future reference. Shall the unit require maintenance, contact an authorized service centre. Use of controls, adjustments or the performance of procedures other than those specified herein may result in hazardous radiation exposure. To prevent direct exposure to laser beam, do not try to open the enclosure. Visible laser radiation when open. DO NOT STARE INTO BEAM. CAUTION: The apparatus shall not be exposed to water (dripping or splashing) and no objects filled with liquids, such as vases, shall be placed on the apparatus. CAUTION concerning the Power Cord Most appliances recommend they be placed upon a dedicated circuit; That is, a single outlet circuit which powers only that appliance and has no additional outlets or branch circuits. Check the specification page of this owner's manual to be certain. Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock or fire. Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized service centre. Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance. To disconnect power from the mains, pull out the mains cord plug. When installing the product, ensure that the plug is easily accessible. BD360-P-BISRBLK-ENG 9/17/09 11:41 AM Notes on Copyrights Because AACS (Advanced Access Content System) is approved as content protection system for BD format, similar to use of CSS (Content Scramble System) for DVD format, certain restrictions are imposed on playback, analog signal output, etc., of AACS protected contents. The operation of this product and restrictions on this product may vary depending on your time of purchase as those restrictions may be adopted and/or changed by AACS after the production of this product. Furthermore, BD-ROM Mark and BD+ are additionally used as content protection systems for BD format, which imposes certain restrictions including playback restrictions for BD-ROM Mark and/or BD+ protected contents. To obtain additional information on AACS, BD-ROM Mark, BD+, or this product, please contact an authorized Customer Service Centre. Many BD-ROM/DVD discs are encoded with copy protection. Because of this, you should only connect your player directly to your TV, not to a VCR. Connecting to a VCR results in a distorted picture from copy-protected discs. This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited. Under the U.S. Copyright laws and Copyright laws of other countries, unauthorized recording, use, display, distribution, or revision of television programs, videotapes, BD-ROM discs, DVDs, CDs and other materials may subject you to civil and/or criminal liability. Page 3 Software Update The software of the player can be updated by connecting it to the Internet using the LAN cable. We recommend to update the player using the latest software to enhance the products operation and/or add new features (see page 41). To use BD-Live functionality You must attach a USB Flash Drive using the USB port (see page 20). Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. Manufactured under license under U.S. Patent #: 5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,487,535 & other U.S. and worldwide patents issued & pending. DTS is a registered trademark and the DTS logos, Symbol, DTS-HD and DTS-HD Advanced Digital Out are trademarks of DTS, Inc. © 1996-2008 DTS, Inc. All Rights Reserved. HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI licensing LLC. What is SIMPLINK? Some functions of this unit are controlled by the TV’s remote control when this unit and LG TV’s with SIMPLINK are connected through HDMI connection. “BD-LIVE” logo is a trademark of Blu-ray Disc Association. “DVD Logo” is a trademark of DVD Format/Logo Licensing Corporation. “x.v.Color” is a trademark of Sony Corporation. Controllable functions by LG TV’s remote control; Play, Pause, Scan, Skip, Stop, Power Off, etc. “Blu-ray Disc” is a trademark. Refer to the TV owner’s manual for the details of SIMPLINK function. “BONUSVIEW” is trademark of Blu-ray Disc Association. LG TV’s with SIMPLINK function have the logo as shown above. This product is licensed under the AVC patent portfolio license and VC-1 patent portfolio license for the personal and non-commercial use of a consumer to (i) encode video in compliance with the AVC Standard and VC-1 Standard (“AVC/VC-1 Video”) and/or (ii) decode AVC/VC-1 Video that was encoded by a consumer engaged in a personal and non-commercial activity and/or was obtained from a video provider licensed to provide AVC/VC-1 Video. No license is granted or shall be implied for any other use. Additional information may be obtained from MPEG LA, LLC. See http://www.mpegla.com. Note: Depending on the disc type or playing status, some SIMPLINK operation may differ from your purpose or not work. Licenses Java and all Java-based trademarks and logos are trademarks or registered trademarks of Sun Microsystems, Inc. in the United States and other countries. “AVCHD” and the “AVCHD” logo are trademarks of Panasonic Corporation and Sony Corporation. YouTube is a trademark of Google Inc. 3 BD360-P-BISRBLK-ENG 9/17/09 11:41 AM Page 4 Contents Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-8 Reference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42 Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9 Language Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43 Front panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10 Area Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43 Rear panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44-45 Connections to your TV . . . . . . . . . . . . . . . . . . . . . . . . . .12-13 Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46 Connecting to an Amplifier . . . . . . . . . . . . . . . . . . . . . . .14-15 The unit’s Audio Output Specifications . . . . . . . . . . . . . .15-16 IMPORTANT INFORMATION RELATING TO NETWORK SERVICES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47 Resolution Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16-17 Open source software notice . . . . . . . . . . . . . . . . . . . . . . . .48 Internet connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18-19 Network update notification . . . . . . . . . . . . . . . . . . . . . . . . . .19 Using a USB Flash Drive . . . . . . . . . . . . . . . . . . . . . . . . . . . .20 Using the Home Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21 Adjust the Setup settings . . . . . . . . . . . . . . . . . . . . . . . .21-27 Play a disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28-30 Displaying disc Information . . . . . . . . . . . . . . . . . . . . . . . . . .31 Enjoying BD-LIVE™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32-33 Playing a movie . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33-34 Listening to music . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35-36 Viewing a photo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36-37 Playing YouTube videos . . . . . . . . . . . . . . . . . . . . . . . . . .38-40 Software update . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41 Before connecting, operating or adjusting this product, please read this instruction booklet carefully and completely. 4 BD360-P-BISRBLK-ENG 9/17/09 11:41 AM Page 5 Introduction To ensure proper use of this product, please read this owner’s manual carefully and retain for future reference. This manual provides information on the operation and maintenance of your player. Should the unit require service, contact an authorized service location. About the Symbol Display “ “ may appear on your TV display during operation and indicates that the function explained in this owner’s manual is not available on that specific media. Symbols Used in this Manual Note: Indicates special notes and operating features. Handling the Unit When shipping the unit Please save the original shipping carton and packing materials. If you need to ship the unit, for maximum protection, re-pack the unit as it was originally packed at the factory. Keeping the exterior surfaces clean Do not use volatile liquids such as insecticide spray near the unit. Wiping with strong pressure may damage the surface. Do not leave rubber or plastic products in contact with the unit for a long period of time. Cleaning the unit To clean the player, use a soft, dry cloth. If the surfaces are extremely dirty, use a soft cloth lightly moistened with a mild detergent solution. Do not use strong solvents such as alcohol, benzine, or thinner, as these might damage the surface of the unit. Tip: Indicates tips and hints for making the task easier. Maintaining the Unit The unit is a high-tech, precision device. If the optical pick-up lens and disc drive parts are dirty or worn, the picture quality could be diminished. For details, please contact your nearest authorized service centre. A section whose title has one of the following symbols are applicable only to the disc represented by the symbol. Notes on Discs ALL BD All discs listed below BD-ROM disc DVD DVD-Video, DVD±R/RW in Video mode or VR mode and finalized AVCHD DVD±R/RW in AVCHD format DivX DivX files ACD Audio CDs MP3 MP3 files WMA WMA files Handling Discs Do not touch the playback side of the disc. Hold the disc by the edges so that fingerprints do not get on the surface. Never stick paper or tape on the disc. Storing Discs After playing, store the disc in its case. Do not expose the disc to direct sunlight or sources of heat and never leave it in a parked car exposed to direct sunlight. Cleaning Discs Fingerprints and dust on the disc can cause poor picture quality and sound distortion. Before playing, clean the disc with a clean cloth. Wipe the disc from the centre out. Do not use strong solvents such as alcohol, benzine, thinner, commercially available cleaners, or anti-static spray intended for older vinyl records. 5 BD360-P-BISRBLK-ENG 9/17/09 11:41 AM Page 6 Playable Discs Blu-ray Disc - Discs such as movies that can be purchased or rented - BD-R/RE discs that contain audio titles, DivX, MP3, WMA, or Photo files. DVD-VIDEO (8 cm / 12 cm disc) Discs such as movies that can be purchased or rented DVD-R (8 cm / 12 cm disc) - Video mode and finalized only - Supports the dual layer disc also - AVCHD format - DVD-R discs that contain audio titles, DivX, MP3, WMA, or Photo files. DVD-RW (8 cm / 12 cm disc) - VR mode, Video mode and finalized only - AVCHD format - DVD-RW discs that contain audio titles, DivX, MP3, WMA, or Photo files. Notes: Depending on the conditions of the recording equipment or the CDR/RW (or DVD±R/RW) disc itself, some CD-R/RW (or DVD±R/RW) discs cannot be played on the unit. Do not attach any seal or label to either side (the labeled side or the recorded side) of a disc. Do not use irregularly shaped CDs (e.g., heart-shaped or octagonal). Doing so may result in malfunctions. Depending on the recording software & the finalization, some recorded discs (CD-R/RW or DVD±R/RW) may not be playable. DVD±R/RW and CD-R/RW discs recorded using a personal computer or a DVD or CD Recorder may not play if the disc is damaged or dirty, or if there is dirt or condensation on the player’s lens. If you record a disc using a personal computer, even if it is recorded in a compatible format, there are cases in which it may not play because of the settings of the application software used to create the disc. (Check with the software publisher for more detailed information.) This player requires discs and recordings to meet certain technical standards in order to achieve optimal playback quality. Pre-recorded DVDs are automatically set to these standards. There are many different types of recordable disc formats (including CD-R containing MP3 or WMA files) and these require certain pre-existing conditions to ensure compatible playback. Customers should note that permission is required in order to download MP3 / WMA files and music from the Internet. Our company has no right to grant such permission. Permission should always be sought from the copyright owner. DVD+R (8 cm / 12 cm disc) - Finalized disc only - Supports the dual layer disc also - AVCHD format - DVD+R discs that contain audio titles, DivX, MP3, WMA, or Photo files. DVD+RW (8 cm / 12 cm disc) - Video mode and finalized only - AVCHD format - DVD+RW discs that contain audio titles, DivX, MP3, WMA, or Photo files. Audio CD (8 cm / 12 cm disc) Audio CDs or CD-Rs/CD-RWs in audio CD format that can be purchased CD-R/CD-RW (8 cm / 12 cm disc) CD-R/CD-RW discs that contain audio titles, DivX, MP3, WMA, or Photo files. 6 BD360-P-BISRBLK-ENG 9/17/09 11:41 AM Page 7 BD-ROM Disc Features BD-ROM Discs can store 25 GB (single layer) or 50 GB (dual layer) on a single sided disc - about 5 to 10 times the capacity of a DVD. BD-ROM Discs also support the highest quality HD video available in the industry (up to 1920 x 1080) - Large capacity means no compromise on video quality. Furthermore, a BD-ROM disc has the same familiar size and look as DVD. The following BD-ROM disc features are disc dependent and will vary. Appearance and navigation of features will also vary from disc to disc. Menu sounds When you highlight or select a menu option, sounds can be heard such as button clicks or a voice-over explaining the highlighted menu choice. Multi-page/PopUp Menus With DVD-Video, playback is interrupted each time a new menu screen is accessed. Due to BD-ROM disc’s ability to preload data from the disc without interrupting playback, a menu can consist of several pages. You can browse through the menu pages or select different menu paths, while the audio and video remain playing in the background. Not all discs will have the features described below. Interactivity Certain BD-ROM Discs may contain animated menus and/or trivia games. BD-ROM, Hybrid disc have both BD-ROM and DVD (or CD) layers on one side. On such discs, BD-ROM layer will be only played back in this player. User Browsable Slideshows With BD-ROM Discs, you can browse through various still pictures while the audio remains playing. Video highlights The BD-ROM format for movie distribution supports three highly advanced video codecs, including MPEG-2, MPEG4 AVC (H.264), and SMPTE VC1. HD video resolutions are also available: 1920 x 1080 HD Subtitles Depending on what is contained on the BD-ROM disc, you may be able to select different font styles, sizes and colours for some subtitles. Subtitles may also be animated, scrolled or faded in and out. 1280 x 720 HD Graphic planes Two individual, full HD resolution (1920x1080) graphic planes (layers) are available, on top of the HD video layer. One plane is assigned to videorelated, frame accurate graphics (like subtitles), and the other plane is assigned to interactive graphic elements, such as buttons or menus. For both planes, various wipes, fades and scroll effects may be available. For High-Definition Playback To view high-definition contents from BD-ROM discs, an HDTV is required. Some discs may require HDMI OUT for viewing of high-definition contents. Ability to view high-definition contents in BD-ROM discs may be limited depending on the resolution of your TV. BD-J Interactive Capability The BD-ROM format supports Java for interactive functions. “BD-J” offers content providers almost unlimited functionality when creating interactive BD-ROM titles. BD-ROM Disc Compatibility This player supports BD-ROM Profile 2. • Discs supporting BD-Live (BD-ROM version 2 Profile 2) that allows interactive functions to be used when this unit is connected to the Internet in addition to the BONUSVIEW function. • Discs supporting BONUSVIEW (BD-ROM version 2 Profile 1 version 1.1/Final Standard Profile) that allows Virtual packages or Picture-inPicture functions to be used. 7 BD360-P-BISRBLK-ENG 9/17/09 11:41 AM Page 8 Regional Code Certain System Requirements This unit has a regional code printed on the rear of the unit. This unit can play only BD-ROM or DVD discs labeled same as the rear of the unit or “ALL”. For high definition video playback: AVCHD (Advanced Video Codec High Definition) • This player can playback AVCHD format discs. These discs are normally recorded and used in camcorders. • The AVCHD format is a high definition digital video camera format. • The MPEG-4 AVC/H.264 format is capable of compressing images at higher efficiency than that of the conventional image compressing format. • Some AVCHD discs use the “x.v.Colour” format. • This player can playback AVCHD discs using “x.v.Colour” format. • Some AVCHD format discs may not play, depending on the recording condition. • AVCHD format discs need to be finalized. • “x.v.Colour” offers a wider colour range than normal DVD camcorder discs. Compatibility Notes • Because BD-ROM is a new format, certain disc, digital connection and other compatibility issues are possible. If you experience compatibility problems, please contact an authorized Customer Service Centre. • Viewing high-definition content and up-converting standard DVD content may require a HDMI-capable input or HDCP-capable DVI input on your display device. • Some BD-ROM and DVD discs may restrict the use of some operation commands or features. • Dolby TrueHD, Dolby Digital Plus and DTS-HD are supported with maximum 7.1 channels if you use HDMI connection for the audio output of the unit. • You can use a USB Flash Drive that is used to store some disc related information, including downloaded on-line content. The disc you are using will control how long this information is retained. 8 • High definition display that has COMPONENT or HDMI input jacks. • BD-ROM disc with high definition content. • HDMI or HDCP capable DVI input on your display device is required for some content (as specified by disc authors). • For up-conversion of standard definition DVD, a HDMI or HDCP capable DVI input on your display device is required for copy protected content. For Dolby® Digital Plus, Dolby TrueHD and DTS-HD multi-channel audio playback: • An amplifier/receiver with a built-in (Dolby Digital, Dolby Digital Plus, Dolby TrueHD, DTS or DTS-HD) decoder. • Main, center, surround speakers and subwoofer as necessary for chosen format. BD360-P-BISRBLK-ENG 9/17/09 11:41 AM Page 9 Remote control a a Direction buttons: Selects an option in the menu. 0-9 numerical buttons: Select numbered options in a menu. ENTER ( ): Acknowledges menu selection. AUDIO ( channel. ): Selects an audio language or audio PIP AUDIO*: Switch on/off Secondary Audio (BD-ROM only). PIP*: Switches on/off Secondary Video (Picture-in-picture) (BD-ROM only). * Depending on the disc type or the pre-recorded contents of the BD-ROM disc, different functions may be executed or there may be no response when pressing some buttons (depending on media used). b OPEN/CLOSE (Z): Opens and closes the disc tray. TV Control Buttons: See page 42. CLEAR: Removes a mark on the search menu or a number when setting the password. c DISPLAY: Displays or exits On-Screen Display. POWER: Switches the player ON or OFF. b SUBTITLE ON/OFF: Switches the subtitle on or off. SUBTITLE ( ): Selects a subtitle language. TITLE/POP-UP: Displays the DVD title menu or BD-ROM’s popup menu, if available. d Coloured (A, B, C, D) buttons: Use to navigate BD-ROM menus. They are also used for [MOVIE], [PHOTO], [MUSIC] and [YouTube] menu. MARKER: Marks any point during playback. SEARCH: Displays or exits the search menu. REPEAT: Repeat a desired section or sequence. m / M (SCAN): Searches backward or forward. ZOOM: Displays or exits the [Zoom] menu. . / > (SKIP): Go to next or previous chapter / track / file. RESOLUTION: Sets the output resolution for HDMI and COMPONENT VIDEO OUT jacks. X (PAUSE): Pauses playback. button(s) is not available. N (PLAY): Starts playback. Remote Control Operation x (STOP): Stops playback. d c HOME: Displays or exits the [Home Menu]. DISC MENU: Accesses menu on a disc. RETURN (O): Exits the menu or resumes playback. The resume play function may work depending on the BD-ROM disc. Point the Remote Control at the remote sensor and press the buttons. Remote Control Battery Installation Remove the battery cover on the rear of the Remote Control, and insert a R03 (size AAA) battery with and matched correctly. 9 BD360-P-BISRBLK-ENG 9/17/09 12:02 PM Page 10 Front panel a b c d e f g a Disc Tray Insert a disc here. e Display Window Shows the current status of the player. b OPEN/CLOSE (Z) Opens or closes the disc tray. f Remote Sensor Point the remote control here. c 1 (POWER) Button Switches the unit ON or OFF. g x (STOP) Stops playback. d N / X (PLAY / PAUSE) Starts playback. Pause playback temporarily, press again to exit pause mode. h . / > (SKIP) Go to next or previous file/track/chapter. 10 i USB Port Connect a USB Flash Drive. h i BD360-P-BISRBLK-ENG 9/17/09 11:41 AM Page 11 Rear panel a b f g c d e h a AC IN connector Connect the supplied power cord. b COMPONENT VIDEO OUT (Y PB PR) Connect to a TV with Y Pb Pr inputs. c DIGITAL AUDIO OUT (COAXIAL) Connect to digital (coaxial) audio equipment. d HDMI OUT (Type A) Connect to TV with HDMI inputs. (Interface for digital audio and video) e LAN port Connect a network with an always-on broadband connection. f VIDEO OUT Connect to a TV with video inputs. g 2CH AUDIO OUT (Left/Right) Connect to a TV with 2 channel audio inputs. h DIGITAL AUDIO OUT (OPTICAL) Connect to digital (optical) audio equipment. 11 BD360-P-BISRBLK-ENG 9/17/09 11:41 AM Page 12 Connections to Your TV Make one of the following connections, depending on the capabilities of your existing equipment. Tips: • Depending on your TV and other equipment you wish to connect, there are various ways you could connect the player. Use only one of the connections described below. • Please refer to the manuals of your TV, Stereo System or other devices as necessary to make the best connections. Cautions: • Make sure the player is connected directly to the TV. Tune the TV to the correct video input channel. • Do not connect the player’s AUDIO OUT jack to the phono in jack (record player) of your audio system. • Do not connect your player via your VCR. The image could be distorted by the copy protection system. HDMI Connection If you have a HDMI TV or monitor, you can connect it to this player using a HDMI cable. BD player H TV 12 Connect the HDMI jack on the player to the HDMI jack on a HDMI compatible TV or monitor (H). Set the TV’s source to HDMI (refer to TV’s Owner’s manual). Note: If a connected HDMI device does not accept the audio output of the unit, the HDMI device’s audio sound may be distorted or may not output. Tips: • When you use HDMI connection, you can change the resolution for the HDMI output. (Refer to “Resolution Setting” on page 16-17.) • Select the type of video output from the HDMI OUT jack using [HDMI Color Setting] option on the [Setup] menu (see page 22). Cautions: • Changing the resolution when the connection has already been established may result in malfunctions. To solve the problem, turn off the player and then turn it on again. • When the HDMI connection with HDCP is not verified, TV screen is changed to black screen. In this case, check the HDMI connection, or disconnect the HDMI cable. • If there is noise or lines on the screen, please check the HDMI cable (length is generally limited to 4.5m). BD360-P-BISRBLK-ENG 9/17/09 11:41 AM Page 13 Additional Information for HDMI Tip: • When you connect a HDMI or DVI compatible device make sure of the following: - Try switching off the HDMI/DVI device and this player. Next, switch on the HDMI/DVI device and leave it for around 30 seconds, then switch on this player. - The connected device’s video input is set correctly for this unit. - The connected device is compatible with 720x576p, 1280x720p, 1920x1080i or 1920x1080p video input. When you use COMPONENT VIDEO OUT connection, you can change the resolution for the output. (Refer to “Resolution setting” on page 16-17.) • Not all HDCP-compatible HDMI or DVI devices will work with this player. - The picture will not be displayed properly with non-HDCP device. - This player does not playback and TV screen is changed to black screen. Video/Audio (Left/Right) Connection Connect the VIDEO OUT jack on the player to the video in jack on the TV using a video cable (V). Connect the left and right AUDIO OUT jacks of the player to the audio left and right IN jacks on the TV using the audio cables (A). Component Video Connection Connect the COMPONENT VIDEO OUT jacks on the player to the corresponding input jacks on the TV using Y Pb Pr cables (C). Connect the left and right AUDIO OUT jacks of the player to the audio left and right IN jacks on the TV using the audio cables (A). BD player V A TV BD player A C TV 13 BD360-P-BISRBLK-ENG 9/17/09 11:41 AM Page 14 Connecting to an Amplifier Connecting to an Amplifier via HDMI Output Make one of the following connections, depending on the capabilities of your existing equipment. Connect the player’s HDMI OUT jack to the corresponding in jack on your amplifier. Use a HDMI cable (H1). You will need to activate the player’s digital output. (See “[AUDIO] Menu” on pages 23-24.) Note: Since many factors affect the type of audio output, see “The unit’s Audio Output Specifications” on page 15 for details. Connecting to an Amplifier via 2 Channel Audio Output Connect the Left and Right 2CH AUDIO OUT jacks on the player to the audio left and right in jacks on your amplifier, receiver, or stereo system, using audio cables (A). BD player H1 Connecting to an Amplifier via Digital Audio Output (Optical or Coaxial) Connect the player’s DIGITAL AUDIO OUT jack to the corresponding in jack (OPTICAL O or COAXIAL X) on your amplifier. Use an optional digital (optical O or coaxial X) audio cable. You will need to activate the player’s digital output. (See “[AUDIO] Menu” on pages 23-24.) Amplifier/Receiver TV H2 BD player A O x Digital Multi-channel sound A digital multi-channel connection provides the best sound quality. For this you need a multi-channel Audio/Video Receiver that supports one or more of the audio formats supported by your player. Check the receiver manual and the logos on the front of the receiver. (PCM Stereo, PCM Multi-Ch, Dolby Digital, Dolby Digital Plus, Dolby TrueHD, DTS and/or DTS-HD) Tip: Connect the amplifier’s HDMI output jack to HDMI input jack on your TV using a HDMI cable (H2) if your amplifier has HDMI output jack. Amplifier/Receiver 14 BD360-P-BISRBLK-ENG 9/17/09 11:41 AM Page 15 Notes: • You must select a digital audio output and a maximum sampling frequency that your Amplifier (or AV receiver) accepts using [SPDIF], [HDMI] and [Sampling Freq.] options on the [Setup] menu (see page 2324). • With digital audio connection (SPDIF or HDMI), Disc Menu button sounds of BD-ROM may not be heard if the [SPDIF] or [HDMI] option is set to [Primary Pass-Thru]. • If the audio format of the digital output does not match the capabilities of your receiver, the receiver will produce a strong, distorted sound or no sound at all. • Multi-channel Digital Surround Sound via digital connection can only be obtained if your receiver is equipped with a Digital Multi-channel decoder. The unit’s Audio Output Specifications Jack/ Setting Source SPDIF (DIGITAL AUDIO OUT) Analog Output Stereo PCM Stereo DTS Re-encode *3 Primary Pass-Thru *1 Dolby Digital PCM 2ch PCM 2ch DTS Dolby Digital Dolby Digital Plus PCM 2ch PCM 2ch DTS Dolby Digital Dolby TrueHD PCM 2ch PCM 2ch DTS Dolby Digital DTS PCM 2ch PCM 2ch DTS DTS DTS-HD PCM 2ch PCM 2ch DTS DTS Linear PCM 2ch PCM 2ch PCM 2ch DTS PCM 2ch Linear PCM 5.1ch PCM 2ch PCM 2ch DTS PCM 2ch Linear PCM 7.1ch PCM 2ch PCM 2ch DTS PCM 2ch • To see the audio format of the current disc in the on-screen display, press AUDIO. Jack/ Setting Source HDMI OUT PCM Stereo PCM Multi-Ch DTS Re-encode *3 Primary Pass-Thru *1, *2 Dolby Digital PCM 2ch PCM 5.1ch DTS Dolby Digital Dolby Digital Plus PCM 2ch PCM 7.1ch DTS Dolby Digital Plus Dolby TrueHD Dolby TrueHD PCM 2ch PCM 7.1ch DTS DTS PCM 2ch PCM 5.1ch DTS DTS DTS-HD PCM 2ch PCM 5.1ch DTS DTS-HD Linear PCM 2ch PCM 2ch PCM 2ch DTS PCM 2ch Linear PCM 5.1ch PCM 2ch PCM 5.1ch DTS PCM 5.1ch Linear PCM 7.1ch PCM 2ch PCM 7.1ch DTS PCM 7.1ch Notes: *1 The secondary and interactive audio may not be included in the output bitstream if [SPDIF] or [HDMI] option is set to [Primary Pass-Thru]. (Except LPCM Codec : the output always include interactive and secondary audio.) *2 This player automatically selects the HDMI audio according to the decoding capability of the connected HDMI device even though [HDMI] option is set to [Primary Pass-Thru]. 15 BD360-P-BISRBLK-ENG 9/17/09 11:41 AM Page 16 *3 If the [HDMI] or [SPDIF] option is set to [DTS re-encode], the audio output is limited to 48 kHz and 5.1 Ch. If the [HDMI] or [SPDIF] option is set to [DTS re-encode], the DTS Re-encode audio is outputted for BD-ROM discs with secondary audio or interactive audio. Otherwise the original audio is outputted for the other discs (like [Primary Pass-Thru]). Resolution Setting • The audio is outputted as PCM 48 kHz/16 bit for MP3/WMA file and PCM 44.1kHz/16 bit for Audio CD while playback. Note: The player provides several output resolutions for HDMI OUT and COMPONENT VIDEO OUT jacks. You can change the resolution using [Setup] menu or pressing the RESOLUTION button in stop mode. Since several factors affect the resolution of video output, see “Available resolution according to the resolution setting” on next page. How to change the resolution using RESOLUTION button Press RESOLUTION repeatedly in stop mode to change the resolution. The display window will show you the current resolution. How to change the resolution using the [Setup] menu 1 Press HOME and the [Home Menu] appears. 2 Select the [Setup] and press ENTER. The [Setup] menu appears. 3 Use v / V to select [DISPLAY] option then press B to move to the second level. 4 Use v / V to select the [Resolution] option then press B to move to the third level. 5 Use v / V to select the desired resolution then press ENTER to confirm your selection. Note: If you select a resolution that your HDMI TV does not accept or select the 1080p resolution with COMPONENT VIDEO OUT connection, the warning message will appear and then ask you to keep the selected resolution setting. If you do not respond to the question for 10 seconds, the resolution will automatically revert back to the previous resolution. 16 BD360-P-BISRBLK-ENG 9/17/09 11:41 AM Page 17 Available resolution according to the resolution setting • When the non-copy protected media is playing back Video Output HDMI OUT COMPONENT VIDEO OUT 576i 576i 576i 576p 576p 576p Resolution Setting 720p 720p 720p 1080i 1080i 1080i 1080p / 24Hz 1080p / 24Hz 1080p / 50Hz *1, *2 1080p / 50Hz 1080p / 50Hz 1080p / 50Hz *2 *1 When the 1080p/24Hz video source is outputted via HDMI connection, the VIDEO OUT and COMPONENT VIDEO OUT will not output any video signal. *2 Even if the resolution is set to 1080p, non-copy protected BDs and DVDs playback are outputted at 1080i resolution. HDMI OUT connection • If you select a resolution manually and then connect the HDMI jack to TV and your TV does not accept it, the resolution setting is set to [Auto]. • The 1080p video output frame rate may be automatically set to either 24Hz or 50Hz depending both on the capability and preference of the connected TV and based on the native video frame rate of the content on the BD-ROM disc. COMPONENT VIDEO OUT connection • When the copy protected media is playing back Video Output • For the 720p, 1080i, 1080p resolution setting with protected media, real output resolution of COMPONENT VIDEO OUT will be outputted at 576p resolution. HDMI OUT COMPONENT VIDEO OUT 576i 576i 576i 576p 576p 576p VIDEO OUT connection 720p 720p 576p 1080i 1080i 576p The resolution of the VIDEO OUT jack is always outputted at 576i resolution. 1080p / 24Hz 1080p / 24Hz 576p *1 1080p / 50Hz 1080p / 50Hz 576p Resolution Setting • BD or DVD video stream could prevent up-scaling on analog output. Notes: • Depending on your display, some of the resolution settings may result in the picture disappearing or an abnormal picture appearing. In this case, press HOME then RESOLUTION repeatedly until the picture re-appear. • This player supports simultaneous output of all video out jacks. The resolution of the HDMI output will not be the same as the resolution output on the component video output. 17 BD360-P-BISRBLK-ENG 9/17/09 11:41 AM Page 18 Internet connection This player can be connected to a local area network (LAN) via the LAN port on the rear panel. After making the physical connection the player needs to be set up for network communication. This is done from the [Setup] menu — see “[NETWORK] Menu” on page 26 for detailed instructions. • Since there are various connection configurations, please follow the specifications of your telecommunication carrier or internet service provider. Notes: • Depending on the internet service provider (ISP), the number of devices that can receive internet service may be limited by the applicable terms of service. For details, contact your ISP. Connect the player’s LAN port to the corresponding port on your Modem or Router using a LAN cable. Use a commercially available straight LAN cable (Category 5/CAT5 or better with RJ45 connector). • Our company is not responsible for any malfunction of the player and/or the internet connection feature due to communication errors/malfunctions associated with your broadband internet connection, or other connected equipment. By connecting the unit to broadband Internet, you can use software update, BD-Live features and YouTube features. • Our company is not responsible for any trouble in your internet connection. • The features of BD-ROM discs made available through the Internet Connection feature are not created or provided by our company, and our company is not responsible for their functionality or continued availability. Some disc related material available by the Internet Connection may not be compatible with this player. If you have questions about such content, please contact the producer of the disc. BD player • Some internet contents may require a higher bandwidth connection. • Even if the player is properly connected and configured, some internet contents may not operate properly because of internet congestion, the quality or bandwidth of your internet service, or problems at the provider of the content. Broadband Broadband Service Service • Some internet connection operations may not be possible due to certain restrictions set by the Internet service provider (ISP) supplying your broadband Internet connection. Router Cautions: • When plugging or unplugging the LAN cable, hold the plug portion of the cable. When unplugging, do not pull on the LAN cable but unplug while pressing down on the lock. • Do not connect a modular phone cable to the LAN port. 18 • Any fees charged by an ISP including, without limitation, connection charges are your responsibility. • A 10 Base-T or 100 Base-TX LAN port is required for connection to this player. If your internet service does not allow for such a connection, you will not be able to connect the player. • You must use a Router to use xDSL service. BD360-P-BISRBLK-ENG 9/17/09 11:41 AM Page 19 • A DSL modem is required to use DSL service and a cable modem is required to use cable modem service. Depending on the access method of and subscriber agreement with your ISP, you may not be able to use the internet connection feature contained in this player or you may be limited to the number of devices you can connect at the same time. (If your ISP limits subscription to one device, this player may not be allowed to connect when a PC is already connected.) Network update notification • The use of a “Router” may not be allowed or its usage may be limited depending on the policies and restrictions of your ISP. For details, contact your ISP directly. 1 2 • Your ISP may protect this player from being connected to network when confirming MAC ADDRESS. In that case, contact your ISP to request to initialize MAC ADDRESS. If there is a new software is uploaded in the update server, this player let you know that there is a new software update available through via network connection as shown below. Option 1: The update menu will appear on the screen when you turn on the player. Use b / B to select a desired option and then press ENTER. [OK] - Starts the software update. (See page 41 for more detail) [Cancel] - Exits the update menu. [Hide] - Exits the update menu and it does not appear until next software is uploaded in the update server. Option 2: If the software update is available from the update server, the “Software Update” icon appears at the bottom of the Home menu. Press blue colored button to start the update procedure. (see page 41 for more detail) Software Update 19 BD360-P-BISRBLK-ENG 9/17/09 11:41 AM Page 20 Notes: Using a USB Flash Drive • This unit supports only USB Flash Drive with FAT16 or FAT32 format. This unit can play the movie, music and photo files contained on the USB Flash Drive. ON REMOTE 1. Insert a USB Flash Drive to the USB port: – 2 Displays the [Home Menu]: HOME 3 Select a main option: [Music], [Photo] or [Movie] option b B, ENTER 4 Select the [USB] option: bB 5 Displays corresponding menu list: [MOVIE], [MUSIC] or [PHOTO] menu appears. Details for the menu are on pages 33-37. ENTER • The USB Flash Drive can be used for the local storage for enjoying BD-Live discs with Internet • Do not extract the USB Flash Drive during operation (play, etc.). • A USB Flash Drive which requires additional program installation when you have connected it to a computer is not supported. • USB Flash Drive: USB Flash Drive that support USB1.1 and USB2.0. • Movie Files (DivX), Music files (MP3/WMA) and photo files (JPEG/PNG) can be played. For details of operations on each file, refer to relevant pages. • Regular back up is recommended to prevent data loss. Tip: If you select the [Movie], [Photo] or [Music] option when a USB Flash Drive is connected and a disc is inserted simultaneously, the menu for selecting a media will appear. Select a media then press ENTER. • If you use a USB extension cable or USB HUB, the USB Flash Drive may not be recognized. • Some USB Flash Drives may not work with this unit. • Digital camera and mobile phone are not supported. • USB Port of the unit cannot be connected to PC. The unit cannot be used as a storage device. Insert/Remove a USB Flash Drive Inserting a USB Flash Drive – Insert straight-in until it fits into place. Removing a USB Flash Drive – Withdraw the USB Flash Drive carefully. BD player USB Flash Drive 20 BD360-P-BISRBLK-ENG 9/17/09 11:41 AM Page 21 Using the Home Menu Adjust the Setup settings ON REMOTE ON REMOTE 1 Displays the [Home Menu]: HOME 1 Displays the [Home Menu]: HOME 2 Select an option: bB 2 Select the [Setup] option: b B, ENTER 3 Displays the selected option menu: ENTER 3 Select a desired option on the first level: vV 4 Exit the [Home Menu]: HOME 4 Move to second level: B 5 Select a desired option on the second level: vV 6 Move to third level: B 7 Adjust or confirm the setting: v V, ENTER 8 Go back to the previous level: b 9 Exit the [Setup] menu: HOME [Movie] – Start video media’s playback or displays the [MOVIE] menu. [YouTube] – Watch YouTube videos streamed from the Youtube server via the internet to your TV. (page 38-40) [Photo] – Displays [PHOTO] menu. (page 36-37) [Music] – Displays [MUSIC ]menu. (page 35-36) [Setup] – Displays the [Setup] menu. (page 21-27) Tips: • If you select the [Movie], [Photo] or [Music] option when a USB Flash Drive is connected and a disc is inserted simultaneously, the menu for selecting a media will appear. Select a media then press ENTER. • If “Software Update” appears on the [Home Menu], it means there is a software update available via network. To update the unit, press blue button. For details, see page 41. Note: The unit will be in stop mode then the [Home Menu] will appear if you press HOME during playback. First level Second level Third level 21 BD360-P-BISRBLK-ENG 9/17/09 11:41 AM Page 22 [DISPLAY] Menu [576p] – Outputs 576 lines progressive video. [576i] – Outputs 576 lines of interlaced video. 1080p Display Mode When the resolution is set to 1080p, select [24Hz] for smooth presentation of film material (1080/24p) with a HDMI-equipped display compatible with 1080/24p input. TV Aspect Ratio [4:3 Letter Box] – Select when a standard 4:3 TV is connected. Displays theatrical images with masking bars above and below the picture. [4:3 Pan Scan] – Select when a standard 4:3 TV is connected. Displays pictures cropped to fill your TV screen. Both sides of the picture are cut off. [16:9 Original] – Select when a 16:9 wide TV is connected. The 4:3 picture is displayed with an original 4:3 aspect ratio, with black bars appearing at the left and right sides. [16:9 Wide] – Select when a 16:9 wide TV is connected. The 4:3 picture is adjusted horizontally (in a linear proportion) to fill the entire screen. Resolution Sets the output resolution of the Component and HDMI video signal. Refer to “Resolution Setting” on page 16-17 for details about the resolution. [Auto] – If the HDMI OUT jack is connected for TVs providing display information (EDID), automatically selects the resolution best suited to the connected TV. If the COMPONENT VIDEO OUT is only connected, this changes the resolution to 1080i as default resolution. [1080p] – Outputs 1080 lines of progressive video. [1080i] – Outputs 1080 lines of interlaced video. [720p] – Outputs 720 lines of progressive video. 22 Notes: • When you select [24Hz], you may experience some picture disturbance when the video switches video and film material. In this case, select [50Hz]. • Even when [1080p Display Mode] is set to [24Hz], if your TV is not compatible with 1080/24p, the actual frame frequency of the video output will be 50Hz or 60Hz to match the video source format. • When the 1080p/24Hz video source is outputted via HDMI connection, the VIDEO OUT and COMPONENT VIDEO OUT will not output any video signal. HDMI Color Setting Select the type of output from the HDMI OUT jack. For this setting, please refer to the manuals of your display device. [YCbCr] – Select when connecting to a HDMI display device. [RGB] – Select when connecting to a RGB display device. Note: When you connect the HDMI OUT jack to DVI display device, the [HDMI Color Setting] will automatically switch to [RGB]. BD360-P-BISRBLK-ENG 9/17/09 11:41 AM Page 23 [LANGUAGE] Menu [AUDIO] Menu Each disc has a variety of audio output options. Set the player’s Audio options according to the type of audio system you use. Note: Since many factors affect the type of audio output, see “The unit’s Audio Output Specifications” on page 15 for details. Display Menu Select a language for the [Setup] menu and on-screen display. Disc Menu / Disc Audio / Disc Subtitle Select the language you prefer for the audio track (disc audio), subtitles, and the disc menu. [Original] – Refers to the original language in which the disc was recorded. [Other] – Press ENTER to select another language. Use number buttons then ENTER to enter the corresponding 4-digit number according to the language code list on page 43. [Off] (for Disc Subtitle) – Turn off Subtitle. Note: Depending on the disc, your language setting may not work for some discs. HDMI / SPDIF (Digital Audio Output) Select the output sound format when a device equipped with a HDMI or Digital Audio input jack is connected to the HDMI OUT or DIGITAL AUDIO OUT jack on this player. [PCM Stereo] – Select if you connect this unit’s HDMI OUT or DIGITAL AUDIO OUT jack to a device with two-channel digital stereo decoder. [PCM Multi-Ch] (HDMI only) – Select if you connect this unit’s HDMI OUT jack to a device with multi-channel digital decoder. [DTS Re-Encode] – Select if you connect this unit’s HDMI OUT or DIGITAL AUDIO OUT jack to a device with DTS decoder. [Primary Pass-Thru] – Select if you connect this unit’s DIGITAL AUDIO OUT and HDMI OUT jack to a device with LPCM, Dolby Digital, Dolby Digital Plus, Dolby TrueHD, DTS and DTS-HD decoder. 23 BD360-P-BISRBLK-ENG 9/17/09 11:41 AM Page 24 Note: [LOCK] Menu (Parental Control) When [HDMI] option is set to [PCM Multi-Ch], the audio may output as PCM Stereo if the PCM Multi-Ch information is not detected from HDMI device with EDID. The [LOCK] settings affect only BD and DVD playback. Sampling Freq. (Only for SPDIF audio) [192KHz] – Select this if your A/V Receiver or Amplifier is capable of handling 192 KHz signals. [96KHz] – Select this if your A/V Receiver or Amplifier is NOT capable of handling 192 KHz signals. When this choice is made, this unit automatically converts any 192 KHz signals to 96 KHz so your system can decode them. [48KHz] – Select this if your A/V Receiver or Amplifier is NOT capable of handling 192 KHz and 96 KHz signal. When this choice is made, this unit automatically converts any 192 KHz and 96 KHz signals to 48 KHz so your system can decode them. Check the documentation for your A/V Receiver or Amplifier to verify its capabilities. DRC (Dynamic Range Control) When a disc encoded in Dolby Digital or Dolby Digital Plus is playing back, you may wish to compress the dynamic range of the audio output (the difference between the loudest sounds and the quietest ones). This allows you to listen to a movie at a lower volume without losing clarity of sound. Set DRC to [On] for this effect. To access the any features in [LOCK] settings, you must enter the 4-digit security code you have created. If you have not entered a password yet, you are prompted to do so. Enter a 4-digit password and press ENTER. Enter it again and press ENTER to verify. Password You can create, change or delete the password. [New] – Enter a 4-digit password and press ENTER. Enter it again and press ENTER to create a new password. [Change] – Enter the current password and press ENTER. Enter a 4-digit password and press ENTER. Enter it again and press ENTER to create a new password. [Delete] – Enter the 4-digit password and press ENTER to delete the password. Tip: If you make a mistake before pressing ENTER, press b to delete a number one by one. 24 BD360-P-BISRBLK-ENG 9/17/09 11:41 AM Page 25 If you forget your password If you forget your password, you can clear it using the following steps: 1 Remove any disc that might be in the player. 2 Select [LOCK] option in the [Setup] menu. 3 Use Number buttons to enter “210499”. The password is cleared. Rating Blocks playback of rated disc based on their content. (Not all discs are rated.) [Rating 1-8] – Rating one (1) has the most restrictions and rating eight (8) is the least restrictive. [Unlock] – If you select unlock, parental control is not active and the disc plays in full. BD Age Set an age limit of BD-ROM play. Use number buttons to input an age limit for BD-ROM viewing.  – All BD-ROM can be played. [0-254] – Prohibits play of BD-ROM with corresponding ratings recorded on them. Area Code Enter the code of the area whose standards were used to rate the DVD video disc, based on the list on page 43. 25 BD360-P-BISRBLK-ENG 9/17/09 11:41 AM Page 26 [NETWORK] Menu The [NETWORK] settings are needed to use the software update, BD Live and YouTube features. Some BD-ROM discs may enable you to access special BD-ROM sites, if you connect the player to the Internet. For example, if a BD-ROM site includes content such as links to future movie trailers, you can watch the downloaded on-line content on the player. You do not need to connect to a PC to use this function. Preparations: • This feature requires an always-on broadband internet connection. (see page 18-19.) • A BD-ROM disc compatible with this feature is required. Not all BDROM discs are compatible. How to check the network configuration Select [IP Mode] option and check the Network status indicator shown above the menu. (The Network status indicator changes according to Network configuration.) Able to use network Testing Network Unable to use network IP Setting This option is available only if [IP Mode] option is set to [Static IP]. Use the v / V / b / B buttons to select a field; use the number buttons to enter a value. Press ENTER when [OK] is highlighted to finish and exit the screen. BD-LIVE connection You can restrict Internet access when BD-Live functions are used. [Permitted] – Internet access is permitted for all BD-Live contents. IP Mode If there is a DHCP server on the local area network (LAN), this player will automatically be allocated an IP address. If you’re using a broadband router or broadband modem that has a DHCP (Dynamic Host Configuration Protocol) server function, select [Dynamic IP]. The IP address will automatically be determined. If there is no DHCP server on the network and you want to set the IP address manually, select [Static IP] then set the [IP Address], [Subnet Mask], [Gateway] and [DNS Server] using [IP Setting] option. 26 [Partially permitted] – Internet access is permitted only for BD-Live contents which have content owner certificates. Internet access and AACS Online functions are prohibited for all BD-Live contents without a certificate. [Prohibited] – Internet access is prohibited for all BD-Live contents. BD360-P-BISRBLK-ENG 9/17/09 11:41 AM Page 27 [OTHERS] Menu Software Update You can update the software by connecting the unit directly to the software update server (see page 41). DivX Registration Code Skin Changes the background of the initial screen. Java Font Size BD You can adjust the default text size displayed for the BD-J contents during BD-ROM playback. This setting is only valid when BD-J contents do not set the size of text. Please select a font size bigger than 24 when the player is connected with a HD TV. DivX® is a digital video format created by DivX, Inc. This is an official DivX Certified or DivX Ultra Certified device that plays DivX video. This DivX® Certified device must be registered in order to play DivX Videoon-Demand (VOD) content. First generate the DivX VOD registration code for your device and submit it during the registration process. [Important: DivX VOD content is protected by a DivX DRM (Digital Rights Management) system that restricts playback to registered DivX Certified devices. If you try to play DivX VOD content not authorized for your device, the message “Authorization Error” will be displayed and your content will not play.] Learn more at www.divx.com/vod. Press ENTER or B when [DivX Reg. Code] is highlighted and you can view the registration code of the unit. Note: All the downloaded videos from DivX® VOD can only be played back on this unit. Initialize Disclaimer Notice You can reset the player to its original factory settings or initialize the BD storage. Press ENTER or B to view the notice of Network Service Disclaimer on page 47. [Factory Set] – If you need to, you can reset the player to all its factory settings. Some options cannot be reset. (Rating, Password and Area Code, etc.) [BD Storage Clear] – Initializes the BD contents from the connected USB Flash Drive. 27 BD360-P-BISRBLK-ENG 9/17/09 11:41 AM Page 28 Resume playback Play a disc ON REMOTE 1 Open the disc tray: Z) OPEN/CLOSE (Z 2 Insert a disc: - 3 Close the disc tray: Z) OPEN/CLOSE (Z 4 Adjust the disc menu settings: A disc menu may not appear on the screen depending on the disc. v V b B, ENTER 5 Starts playback: N) PLAY (N 6 Stops playback: x) STOP (x Notes: • • When you turn on the player or replace a disc, the player returns to the initial default setting. Depending on the disc, a specific type of audio that the disc has is output. Depending on the pre-recorded contents of the BD-ROM, some functions may not be available or may be operated differently than other media. If a disc menu screen is displayed BD DVD AVCHD DivX The menu screen may be displayed first after loading a disc which contains a menu. Use b / B / v / V buttons to select the title/chapter you want to view, then press ENTER to start playback. Skip to the next/previous chapter/track/file ALL During playback, press . or > to go to the next chapter/track/file or to return to the beginning of the current chapter/track/file. Press . twice briefly to step back to the previous chapter/track/file. 28 BD DVD AVCHD DivX During playback, press STOP (x) to stop playback. The unit records the stopped point, depending on the disc. “Xx” appears on the screen briefly. Press PLAY (N) to resume playback (from the scene point). If you press STOP (x) again or unload the disc (“x” appears on the screen.), the unit will clear the stopped point. (Xx = Resume Stop, x = Complete Stop) Notes: • The resume point may be cleared when a button is pressed (for example; POWER, OPEN/CLOSE, etc). • On BD-Video discs including BD-J, the resume play function does not work. • On BD-ROM interactive title, the unit will be in Complete Stop mode if you press STOP once during playback. Pause a playback ALL During playback, press PAUSE (X) to pause playback. Press PLAY (N) to continue playback. Tip: During Audio CD or MP3/WMA playback, press X once again to resume playback. Frame-by-Frame playback BD DVD AVCHD DivX Press PAUSE (X) repeatedly to play Frame-by-Frame playback. Slow down the playing speed BD DVD AVCHD DivX While the playback is paused, press SCAN M repeatedly to play in slow motion (4 steps, forward only). Fast forward or fast reverse ALL Press SCAN (m or M) to play fast forward or fast reverse during playback. You can change the various playback speeds by pressing SCAN (m or N) to continue play at normal speed. M) repeatedly. Press PLAY (N BD360-P-BISRBLK-ENG 9/17/09 11:41 AM Page 29 Playing repeatedly ALL Using the search menu During playback, press REPEAT repeatedly to select a desired repeat mode. The current title, chapter or track will be played back repeatedly. To return to normal playback, press REPEAT repeatedly to select [Off]. During playback, press SEARCH to display the search menu. Press b / B to skip the playback 15 seconds forward or backward. Note: If you press > once during Repeat Chapter/Track playback, the repeat playback cancels. BD DVD AVCHD DivX Press REPEAT to select [A-] at the beginning of the portion you wish to repeat and press ENTER at the end of the portion. Your selected portion will be repeated continually. You cannot select a portion less than 3 seconds. To return to normal playback, press REPEAT repeatedly to select [Off]. AVCHD DivX During playback or pause mode, press ZOOM to display the [Zoom] menu. Use b / B to select zoom mode (16 steps). Press RETURN to exit the [Zoom] menu. To return to the normal picture size, select [Off] on the [Zoom] menu. Note: This function may not work on some disc or titles. Viewing the Title menu or Popup menu BD AVCHD DivX BD DVD AVCHD DivX To enter a Marker ACD Enlarge the playback image DVD DVD Tip: You can select a point that you want to skip by pressing and holding b / B button. Marker Search Repeating a specific portion (A-B) BD DVD Press TITLE/POP-UP to displays the title menu or popup menu. If the current DVD or BD-ROM disc has a menu, the Title menu or Popup menu appears on the screen. Depending on the disc, the menu may not be available. You can start playback from up to nine memorized points. To enter a marker, press MARKER at the desired point on the disc. The Marker icon appears on the TV screen briefly. Repeat to enter up to nine markers. To Recall or Clear a Marked Scene Press SEARCH and the search menu appears on the screen. Press a number button to select a marker number that you want to recall. Playback starts from the marked scene. OR Press V to highlight a marker number. Use b / B to select a marked scene that you want to recall or clear. Press ENTER and playback starts from the marked scene. Press CLEAR and the marked scene is erased from the search menu. Notes: • This function may not work on some disc or titles. • All marked points are cleared if you press STOP (x) twice (complete stop), the title is changed or if you unload the disc. • If the total length of the title is less than 10 seconds, this function is not available. 29 BD360-P-BISRBLK-ENG 9/17/09 11:41 AM Selecting a subtitle language BD Page 30 DVD AVCHD DivX During playback, press SUBTITLE ON/OFF to switch the subtitle on or off and press SUBTITLE repeatedly to select a desired subtitle language. OR During playback, press DISPLAY to display the playback menu. Use v V to select the [Subtitle] option then use b B to select desired subtitle language. Note: Some discs allow you to change subtitle selections only via the disc menu. If this is the case, press TITLE/POP-UP or DISC MENU button and choose the appropriate subtitle from the selections on the disc menu. Hearing a different audio BD DVD AVCHD DivX During playback, press AUDIO repeatedly to hear a different audio language, audio track or audio channel. OR During playback, press DISPLAY to display the playback menu. Use v V to select the [Audio] option then use b B to select desired audio language, audio track or audio channel. Last Scene Memory BD DVD This unit memorizes the last scene from the last disc that is viewed. The last scene remains in memory even if you remove the disc from the unit or switch off the unit. If you load a disc that has the scene memorized, the scene is automatically recalled. Notes: • Settings are stored in memory for use any time. • This unit does not memorize settings of a disc if you switch off the unit before commencing to play it. • Last Scene Memory function for a previous disc is erased once a different disc is played. • This function may not work depending on the disc. Screen Saver The screen saver appears when you leave the player in Stop mode for about five minutes. If the Screen Saver is displayed for five minutes, the unit automatically turns itself off. Colour System Select You must select the appropriate colour system mode for your TV system. Notes: • Some discs allow you to change audio selections only via the disc menu. If this is the case, press TITLE/POP-UP or DISC MENU button and choose the appropriate audio from the selections on the disc menu. • Immediately after you have switched sound, there may be a temporary discrepancy between the display and actual sound. • On BD-ROM disc, the multi audio format (5.1CH or 7.1CH) is displayed with [MultiCH] in the on-screen display. Using coloured (A, B, C, D) Buttons BD These buttons are available only during BD-J contents playback. Use the appropriate buttons as indicated by the display. Depending on the disc contents, the functions of each button may differ. 30 1 2 Press OPEN/CLOSE (Z) to open the disc tray. Press and hold PAUSE (X) button for more than 5 seconds to change the colour system mode. (AUTO t PAL t NTSC t AUTO) The selected colour system mode is displayed on the display window. [AUTO] – The output source of the player differs depending on the currently playing discs or video contents (YouTube, etc.). [PAL] – The output source of the player is always output as PAL colour system. [NTSC] – The output source of the player is always output as NTSC colour system. BD360-P-BISRBLK-ENG 9/17/09 11:41 AM Page 31 Moving to another title/chapter/track Displaying disc information BD ON REMOTE 1 Play the disc loaded on the unit: PLAY 2 Displays the playback menu: DISPLAY 3 Select an item: vV 4 Adjust the playback menu settings: bB 5 Exit the disc playback menu: DISPLAY a b c d e f g a b c d e f g Title/Track – Current title/track number/total number of titles/tracks. Chapter – Current chapter number/total number of chapters. Time – Elapsed playing time. Audio – Selected audio language or channel. Subtitle – Selected subtitle. Angle – Selected angle/total number of angles. Repeat – Selected repeat mode. Notes: • If no button is pressed for a few seconds, the on-screen display disappears. • A title number cannot be selected on some discs. • An item may not be available on some discs or titles. • If BD interactive title is playing back, some setting information is displayed on the screen but prohibited to be changed. DVD AVCHD DivX When a disc has more than one title/chapter/track, you can move to another title/chapter/track. Press DISPLAY during playback then use v / V to select the [Title/Chapter/Track] icon. Then, press the appropriate numbered button (0-9) or b / B to select a title/chapter/track number. Playing from selected time BD DVD AVCHD DivX Press DISPLAY during playback. The time search box shows the elapsed playing time. Select the [Time] option and then input the required start time in hours, minutes, and seconds from left to right. For example, to find a scene at 2 hours, 10 minutes, and 20 seconds, enter “21020” and press ENTER. If you enter the wrong numbers, press CLEAR and enter the correct numbers. Watching from a different angle BD DVD If the disc contains scenes recorded at different camera angles, you can change to a different camera angle during playback. During playback, press DISPLAY to display the playback menu. Use v V to select the [Angle] option, then use b B to select desired angle. Changing repeat mode BD DVD AVCHD DivX Press DISPLAY during playback. The repeat icon shows the current repeat mode. Use b B to select desired repeat mode. If you want to repeat specific portion, use b B to select [A-] at the beginning of the portion you wish to repeat and press ENTER at the end of the portion. Your selected portion will be repeated continually. You cannot select a portion less than 3 seconds. To return to normal playback, use b B to select [Off]. 31 BD360-P-BISRBLK-ENG 9/17/09 11:41 AM Page 32 Caution: Enjoying BD-LIVE™ ON REMOTE 1 Inserts a BD-ROM disc with BD-LIVE™ features: OPEN/CLOSE (Z) 2 Check the network connection and settings: BD-Live features need the internet connection. – 3 Inserts an USB Flash Drive to the USB port: BD-Live features need an USB Flash Drive. – 4 Select a BD-LIVE™ features on the disc menu: v V b B, ENTER This unit allows you to enjoy functions such as picture-in-picture, secondary audio and Virtual packages, etc., with BD-Video supporting BONUSVIEW (BD-ROM version 2 Profile 1 version 1.1/ Final Standard Profile). In addition to the BONUSVIEW function, BD-Video supporting BD-Live (BD-ROM version 2 Profile 2) that has a network extension function allows you to enjoy more functions such as online games by connecting this unit to the Internet. Do not extract the connected USB device while content is being downloaded or a Blu-ray disc is still in the disc tray. Doing so may damage the connected USB device and BD-Live features may not operate properly with the damaged USB device anymore. If the connected USB device seems damaged from such an action, you can format the connected USB device from the PC and reuse it with this player. Notes: • Some BD-Live contents may be restrictively accessed in some territories by contents provider's own decision. • It may take up to several minutes to load and start enjoying BD-Live contents. • Depending on a disc, the BD-Live function may not be operated if [BDLIVE connection] option is set to [Partially Permitted]. (See page 26.) • The connection to the Internet may take time or the Internet may not be connected depending on the connection environment. It is required that you use a broadband connection. • Do not remove the USB Flash Drive during operation. The USB Flash Drive may be damaged. Stop playback and turn off the menu beforehand. Enjoying BD-Live discs with Internet This unit supports BD-Live, a new BD-Video function that allows you to use the following interactive functions when connected to the Internet. (The usable functions and the operating method may vary with each disc. For details, refer to the instructions for the disc.) Tip: – Additional contents such as movie’s trailer, subtitles and BD-J, etc. can be downloaded to the USB Flash Drive to play them. Special video data, etc. may be played back while they are being downloaded to a USB Flash Drive using one function of BD-Live. The playback may be paused depending on the communication environment. Some functions may be disabled to prevent skipping to sections that have not been downloaded, etc. – Special video data, etc. may be played back while they are being downloaded to a USB Flash Drive. AACS Online Preparations: • The unit must be connected to the Internet and set up to use the BD-Live functions (see page 18 and 26). • A USB Flash Drive is required to use this function. Connect a USB Flash Drive (see page 20). • The free space in the USB Flash Drive must be more than 1GB. 32 When discs supporting BD-Live are played back, the player or disc IDs may be sent to the content provider via the Internet. Services and functions to be provided differ depending on the disc. – You can be introduced to other similar movies if you record your viewing history on the server by using these IDs. – Game score histories can be saved. BD360-P-BISRBLK-ENG 9/17/09 11:41 AM Page 33 Playing secondary video (picture-in-picture) and secondary audio Secondary video can be played from a disc compatible with the picture-inpicture function. For the playback method, refer to the instructions for the disc. – To turn on/off secondary video, press PIP. Secondary video is played. Press the button to turn it ON or OFF. – To turn on/off audio with the secondary video, press PIP AUDIO. The secondary audio is played. Press the button to turn it ON or OFF. Notes: • Discs may not always be played back according to the settings on this unit, as certain playback formats are prioritized on certain discs. • Only the primary video is played during search/slow-motion or frame-byframe. • When the secondary video is turned off, the secondary audio does not play. • This function may not work depending on the disc. • The secondary and interactive audio may not be included in the output bitstream if [SPDIF] or [HDMI] option is set to [Primary Pass-Thru]. (Except LPCM Codec : the output always include interactive and secondary audio.) Playing a movie The player can play DivX files on the disc/USB Flash Drives and video contents recorded on a DVD-RW(VR mode) discs. Before playing DivX files, read “DivX file requirement” on page 34. ON REMOTE 1 Insert a disc/USB Flash Drive containing movie contents. – 2 Displays the [Home Menu]: HOME 3 Select the [Movie] option: b B, ENTER 4 Selects a movie from the [MOVIE] menu: vV 5 Plays the selected movie: PLAY 6 Stops the playback: STOP Notes: • When the USB Flash Drive is connected and a disc is inserted simultaneously, the menu for selecting a media will appear. Select a media then press ENTER. • You can use various playback functions. Refer to pages 28-31. • On the [MOVIE] menu, use red or blue button to move to the previous or next page. • Unfinalized DVD VR format discs may not be played in this player. • Some DVD-VR disc are made with CPRM data by DVD RECORDER. This unit cannot support these kinds of discs. What is CPRM? CPRM is a copy protection system (with scramble system) only allowing the recording of ‘copy once’ broadcast programs. CPRM stands for Content Protection for Recordable Media. 33 BD360-P-BISRBLK-ENG 9/17/09 11:41 AM Page 34 Movie List menu options Use v / V to select a title on the [MOVIE] menu then press ENTER. The menu options appear. DivX file requirement DivX file compatibility with this player is limited as follows: • Available resolution size: DIVX 3.xx – DIVX 6.xx: 720 x 576 (W x H) pixels XVID, H.264/MPEG-4 AVC: 1920 x1080 (W x H) pixels • The file names of DivX and subtitle are limited to 50 characters. • DivX file extensions: “.avi”, “.divx”, “.mpg”, “.mpeg”, “.mp4”, “.mkv” • Playable DivX subtitle: SubRip (.srt / .txt), SAMI (.smi), SubStation Alpha (.ssa/.txt), MicroDVD (.sub/.txt), SubViewer 2.0 (.sub/.txt), TMPlayer (.txt), DVD Subtitle System (.txt) Example) DivX file Use v / V to select an option, then press ENTER. • Playable Codec format: “DIVX3.xx”, “DIVX4.xx”, “DIVX5.xx”, “XVID”, “DIVX6.xx” (Standard playback only), H.264/MPEG-4 AVC • Only the playback function is supported with DivX 6.0 in the unit. • [Play] Starts playback of the selected title. • Playable Audio format: “Dolby Digital”, “DTS”, “MP3”, “WMA”, “AAC” • [Resume Play] Starts playback from where you stopped it previously. • Sampling frequency: within 8 - 48 kHz (MP3), within 32 - 48 kHz (WMA) • [Close] Exits menu options. Also you can disappear it by pressing RETURN button. • Bit rate: within 8 - 320 kbps (MP3), within 32 - 192 kbps (WMA) Notice for displaying the DivX subtitle • CD-R/RW, DVD±R/RW, BD-R/RE Format: ISO 9660+JOLIET, UDF and UDF Bridge format If the subtitle does not display properly, change the language code as described below. • Maximum Files/Folder: Less than 650 (total number of files and folders) 1 Press and hold SUBTITLE for 3 seconds during playback. The language code will appear. 2 Use b / B reapeatedly to select another language code until the subtitle is displayed properly and then press ENTER. • Not all the WMA Audio format is compatible with this unit. • This player support H.264/MPEG-4 AVC profile Main, High at Level 4.1. For a file with higher level, the player will ask whether you want to play or not. • Displaying subtitle file is not available for video files with “.mpg” and “.mpeg” extensions. • HD movie files contained on the CD or USB 1.0/1.1 may not played properly. BD, DVD or USB 2.0 are recommended to play back HD movie files. 34 BD360-P-BISRBLK-ENG 9/17/09 11:41 AM Page 35 Listening to music The player can play Audio CDs and MP3/WMA files. Before playing MP3/WMA files, read “MP3/WMA audio file requirement” on page 36. ON REMOTE • On the [MUSIC] menu, use red or blue button to move to the previous or next page. • The equalizer indicator is not coupled with the music in play back. • If there is impossible code to express in the file name, it may be displayed as illegible. 1 Insert an Audio CD or a disc/USB Flash Drive containing MP3/WMA files. – The [MUSIC] menu options 2 Displays the [Home Menu]: HOME 3 Select a [Music] option: b B, ENTER Use v / V to select a track or file on the [MUSIC] menu then press ENTER. The menu options appear. Use v / V to select an option, then press ENTER. 4 Selects a music from the [MUSIC] menu: vV 5 Plays the selected music: PLAY 6 Stops the playback: STOP • [Play] Starts playback the selected track or file. • [Select Play] Plays back only the marked track(s) or file(s). Use MARKER for selecting the multiple files or tracks. Example) Audio CD Note: When the USB Flash Drive is connected and a disc is inserted simultaneously, the menu for selecting a media will appear. Select a media then press ENTER. Tips: • To go directly to any track or file and play, enter the track/file number using the numbered buttons (0-9). • The playback may start automatically if the Audio CD inserted. • Select a folder then press ENTER and you can view the files in the folder. If you want to move to the upper directory, use b or v/V to highlight [UP Folder] and press ENTER. • [Random] Starts or stops random playback. By pressing > during random playback, the unit selects another track and resumes random playback. • [Unmark All] Unmarks all marked files or tracks. • [Close] Exits menu options. Also you can disappear it by pressing RETURN button. Note: You cannot use [Select Play] and [Random] functions simultaneously. 35 BD360-P-BISRBLK-ENG 9/17/09 11:41 AM Page 36 MP3/WMA audio file requirement Viewing a photo File extensions: “.mp3”, “.wma” This unit can play a photo files. Before playing photo files, read “Photo file requirement” on page 37. Sampling frequency: within 8 - 48 kHz (MP3), within 32 - 48kHz (WMA) Bit rate: within 8 - 320kbps (MP3), within 32 - 192kbps (WMA) CD-R/RW, DVD±R/RW, BD-R/RE Format: ISO 9660+JOLIET, UDF and UDF Bridge format Maximum Files/Folder: Less than 650 (total number of files and folders) Notes on MP3/WMA file • Depending on the size and number of the MP3/WMA files, it may take several minutes to read the contents of the media. • This unit cannot support the ID3 Tag embedded in the MP3 file. • The total playback time indicated on the screen may not correct for VBR files. ON REMOTE 1 Insert a disc/USB Flash Drive containing photo files. – 2 Displays the [Home Menu]: HOME 3 Select a [Photo] option: b B, ENTER 4 Selects a photo from the [PHOTO] menu: vVbB 5 Displays the selected photo in full screen: ENTER 6 Displays the next or previous photo: ./> 7 Return to the [PHOTO] menu screen: STOP Note: When the USB Flash Drive is connected and a disc is inserted simultaneously, the menu for selecting a media will appear. Select a media then press ENTER. Tips: • To go directly to a specific file, enter the file number using the numbered buttons (0-9). 36 • You can advance to the previous or next file by pressing . or > during viewing a photo file in full screen. • You can start the slide show by pressing PLAY (N) while the [PHOTO] menu appears. BD360-P-BISRBLK-ENG • 9/17/09 11:41 AM Page 37 Select a folder then press ENTER and you can view the files in the folder. If you want to move to the upper directory, use v/V/b/B to highlight [UP Folder] and press ENTER. • On the [PHOTO] menu, use red or blue button to move to the previous or next page. • If there is impossible code to express in the file name, it may be displayed as illegible. Options during viewing a photo file in full screen You can use various options during viewing a picture in full screen. Use v V b B to select an option and use the options as described below. a b c d e f Photo file requirement File extensions: “.jpg”, “.jpeg”, “.png” Recommended size: Less than 3,000 x 3,000 x 24 bit/pixel Less than 3,000 x 2,250 x 32 bit/pixel CD-R/RW, DVD±R/RW, BD-R/RE Format: ISO 9660+JOLIET, UDF and UDF Bridge format Maximum Files/Folder: Less than 650 (total number of files and folders) Notes on Photo file • The lossless compression photo image files are not supported. • The available size of Progressive photo is limited to 3.3M pixels. • Depending on the size and number of the photo files, it may take several minutes to read the contents of the media. g a Use b B to advance to the previous or next file. b Press ENTER to start or pause the slide show. c Press ENTER to play or pause the background music. This option is available after the background music is selected using [Music Select] option. d Press ENTER to rotate the picture clockwise. This option is not available during slide show. e Press ENTER to set the Slide Show speed. f Selects the background music. 1) Press ENTER and the menu will appear. 2) Use v V b B to select a media or folder that there are music file(s). 3) Press ENTER to confirm your selection. g Press ENTER to exit the option menu. To appear the menu again, press ENTER. 37 BD360-P-BISRBLK-ENG 9/17/09 11:41 AM Page 38 a Featured – The featured videos list will be displayed. b Recent Videos – The most recently updated videos list will be displayed. c Most Viewed – The most viewed videos list will be displayed. The period option appears at the bottom of the screen. d Top Rated – The best rated videos list from YouTube server will be displayed. The period option appears at the bottom of the screen. e Search – The keyboard menu will be displayed. See “Searching videos” on page 40 for more detail. f History – The list of videos that you recently played on this unit will be displayed. Maximum of 5 videos can be displayed. g Favorites – This option will be appeared only when the unit is in sign-in status. Displays the videos list that is arranged in the YouTube server with your account. Some videos may not appear on the [Favorites] list, even if the videos are arranged in the server. h Sign in (Sign Out) – Displays the keyboard menu to sign in or returns to the sign-out status. See “Sign in with your YouTube account” on page 40 for more details. i Local site – Choose which country's videos you would like to view. The countries listed on the [Local Site] menu may differ from those listed on the YouTube web site. Playing YouTube videos ON REMOTE 1 Check the network connection and settings: See page 18 and 26. – 2 Check the network configurations: See page 26. – 3 Displays the [Home Menu]: HOME 4 Select the [YouTube] option: b B, ENTER 5 Select a desired option on the YouTube menu: b B, ENTER 6 Select a video you want to play: bB 7 Start playback the selected video: N), ENTER PLAY (N or DISPLAY Network condition YouTube menu videos list period options Notes: • The YouTube menu can display 5 videos in the videos list. Press red or blue button to display next/previous 5 videos. • If you select the [Most Viewed] or [Top Rated] option in the YouTube menu, the period options appear at the bottom of the screen. Use v V b B to select a period option and press ENTER to display the videos list within the selected period. • The videos list searched from the player may different with the list searched from a web browser on PC. About the YouTube menu There are various options on the YouTube menu. Use v V b B to select an option and press ENTER to select the options as described below. a b f 38 c g d h e i BD360-P-BISRBLK-ENG 9/17/09 11:41 AM Page 39 About YouTube playback screen When you press PLAY (N) or ENTER at the video you want to watch, the playback screen and content detail will appear on the screen. content detail playback screen progress bar while playing And when the playback ends or stops, the stopped playback screen and related videos list appear on the screen. Use v V b B to select the current video or a video from the related videos list and then press PLAY (N) or ENTER to play the selected video. related videos list playback screen Press DISPLAY to toggle between playback in full screen and playback screen with content detail. Playing a video While watching a video from YouTube via your player, you can control the YouTube video playback. You can use the buttons on the remote to pause and resume viewing, just like when you watch a DVD. While playing a video, the buttons on the remote do the following: Button(s) Operations N or ENTER Starts playback the video with content detail. DISPLAY Toggle between playback in full screen and playback screen with content detail. X To pause a video while it is playing. To resume playing a paused video, press PLAY (N) again. x Stops the video and displays related videos list. ./> Skip the playback forward or backward . HOME When you have finished watching videos, simply press the HOME button on the remote control to go to the [Home Menu]. progress bar Notes: • The settings of this player do not affect the YouTube’s playback quality. while stopped When you press DISPLAY at the video you want to watch, the playback starts in full screen. playback screen • The playback of YouTube videos may be paused, stopped or buffering occurring often depending on your broadband speed. We recommend a minimum connection speed of 1.5 Mbps. For the best playback condition, a connection speed of 4.0 Mbps is required. Sometimes your broadband speed varies based on your ISP’s network conditions. Contact your ISP if you have problems maintaining a fast connection that is reliable, or if you want to increase your connection speed. Many ISPs offer a variety of broadband speed options. progress bar Full Screen 39 BD360-P-BISRBLK-ENG 9/17/09 11:41 AM Page 40 Searching videos You can search for videos by entering search words of up to 30 characters. Use b B to select [Search] option from the menu and press ENTER to display the keyboard menu. Use v V b B to select a character then press ENTER to confirm your selection on the keyboard menu. To enter a letter with an accent mark, select the letter from extended character set. Example: Select “D” and then press DISPLAY to display the extended character set. Use b B to select “D” or “Ď” and then press ENTER. [OK]: Searching related videos of search words. [Clear]: Clear all entered characters. [Space]: Inserts a space at the cursor position. [Backspace]: Deletes the previous character at the cursor position. [ABC / abc / #$%&]: Change the keyboard menu settings to capital letter, small letters or symbols. [OK]: Finish entering an ID or password. [Clear]: Clear all entered characters. [Space]: Inserts a space at the cursor position. [Backspace]: Deletes the previous character at the cursor position. [ABC / abc / #$%&]: Change the keyboard menu settings to capital letters, small letters or symbols. If you want to sign out, select the [Sign Out] from the YouTube menu and press ENTER. This unit can automatically store up to 5 IDs which were previously signed-in. The IDs list appears when you select the [Sign In] option. Select a stored ID on the list and press ENTER to display the keyboard menu with the selected ID is entered. You will then only need to enter the password to sign in. When you finish entering the search words, select [OK] and press ENTER to display the related videos list. Note: Available languages that can be entered using the keyboard menu are as follows: English, Spanish, Italian, French, German, Dutch, Portuguese, Swedish, Polish and Czech. Sign in with your YouTube account To watch videos from your [Favorites] video list on the YouTube server with your account, you need to sign in with your YouTube account. Use b B to select [Sign In] option from the menu and press ENTER to display the keyboard menu. Use v V b B to select a character then press ENTER to confirm your selection on the keyboard menu. 40 [New ID]: Displays the keyboard menu for entering a new ID and password. [X]: Delete the stored ID as shown left of the [X] symbol. BD360-P-BISRBLK-ENG 9/17/09 11:41 AM Page 41 Software Update You can update the player using the latest software to enhance the products operation and/or add new features. You can update the software by connecting the unit directly to the software update server. Step 1: Check the Network Connection and settings 6. When downloading is completed, the message, “Download is complete. Do you want to update?” appears. 7. Select OK to start updating. (Selecting [Cancel] will end the update and downloaded file will not be re-usable. To update software the next time, the software update procedure has to be started from the beginning again.) See page 18 and 26. Caution: Do not turn off the power during the software update. Step 2: Checking Network Configuration Note: If the software includes the driver update, disc tray may open during the process. See page 26. Step 3: Updating Software 8. When update is completed, the message, “Update is complete.” will appear, and the power will turn off automatically after 5 seconds. Cautions: 9. Turn the power back on. The system now operates with the new version. • Before updating the software in your player, remove any disc and USB Flash Drive from the player. • Before updating the software in your player, turn the player off and then turn it back on. • During the software update procedure, do not turn off the player or disconnect AC power, or do not press any button. • If you cancel the update. turn off the power and turn it on for stable performance. • This unit cannot be updated to previous software version. 10. After completing the update process, repeat procedures 1-4 in Step 4 and check if there are no more updates available. Tip: The Software Update function may not work properly depending on your internet environment. In this case, you can obtain the latest software from the authorized LG Electronics Service Centre then update your player. Refer to “Customer Support” on page 45. 1. Select [Software Update] option in the [Setup] menu then press B or ENTER. 2. The player will check for the newest update. Caution: Pressing ENTER while checking for the update will end the process. Note: If there is no update available, the Message, “No update is found.” appears. Press ENTER to return to the [Home Menu]. 3. If newer version exists, the message “A new update was found. Do you want to download it?” appears. 4. Select OK to download the update. (Selecting [Cancel] will end the update.) 5. The player starts downloading the newest update from the server. (Downloading will take about 80 seconds at the network speed of 4Mbps Speed.) 41 BD360-P-BISRBLK-ENG 9/17/09 11:41 AM Page 42 Reference Setting up the remote to control your TV Controlling a TV with the Supplied Remote Control You can operate your TV with the supplied remote control. If your TV is listed in the table below, set the appropriate manufacturer code. You can control the volume, input source, and power state of your TV with the supplied Remote Control. You can control your TV using the buttons below. TV Control Buttons While holding down TV POWER button, and press the manufacturer code for your TV with the numerical buttons (see the table below). Release the TV POWER button to complete setting. Manufacturer Code Number LG / GoldStar 1 (Default), 2 Zenith 1, 3, 4 Samsung 6, 7 Sony 8, 9 Hitachi 4 Depending on your TV, some or all buttons may not function on the TV, even after entering the correct manufacturer code. When you replace the batteries of the remote, the code number you have set may be reset to the default setting. Set the appropriate code number again. By pressing You can TV POWER Turn the TV on or off. AV/INPUT Switch the TV’s input source between the TV and other input sources. PR/CH +/- Scan up or down through memorized channels. VOL +/– Adjust the volume of the TV. TV MUTE Temporarily turns TV sound OFF, press again to restore. Note: Depending on the unit being connected, you may not be able to control your TV using some of the buttons. 42 BD360-P-BISRBLK-ENG 9/17/09 11:41 AM Page 43 Language Codes Use this list to input your desired language for the following initial settings: [Disc Audio], [Disc Subtitle] and [Disc Menu]. Language Afar Afrikaans Albanian Ameharic Arabic Armenian Assamese Aymara Azerbaijani Bashkir Basque Bengali; Bangla Bhutani Bihari Breton Bulgarian Burmese Byelorussian Chinese Code 6565 6570 8381 6577 6582 7289 6583 6588 6590 6665 6985 6678 6890 6672 6682 6671 7789 6669 9072 Language Croatian Czech Danish Dutch English Esperanto Estonian Faroese Fiji Finnish French Frisian Galician Georgian German Greek Greenlandic Guarani Gujarati Code 7282 6783 6865 7876 6978 6979 6984 7079 7074 7073 7082 7089 7176 7565 6869 6976 7576 7178 7185 Language Hausa Hebrew Hindi Hungarian Icelandic Indonesian Interlingua Irish Italian Japanese Kannada Kashmiri Kazakh Kirghiz Korean Kurdish Laothian Latin Latvian, Lettish Code 7265 7387 7273 7285 7383 7378 7365 7165 7384 7465 7578 7583 7575 7589 7579 7585 7679 7665 7686 Language Lingala Lithuanian Macedonian Malagasy Malay Malayalam Maori Marathi Moldavian Mongolian Nauru Nepali Norwegian Oriya Panjabi Pashto, Pushto Persian Polish Portuguese Code 7678 7684 7775 7771 7783 7776 7773 7782 7779 7778 7865 7869 7879 7982 8065 8083 7065 8076 8084 Language Quechua Rhaeto-Romance Rumanian Russian Samoan Sanskrit Scots Gaelic Serbian Serbo-Croatian Shona Sindhi Singhalese Slovak Slovenian Spanish Sudanese Swahili Swedish Tagalog Code 8185 8277 8279 8285 8377 8365 7168 8382 8372 8378 8368 8373 8375 8376 6983 8385 8387 8386 8476 Language Tajik Tamil Telugu Thai Tonga Turkish Turkmen Twi Ukrainian Urdu Uzbek Vietnamese Volapük Welsh Wolof Xhosa Yiddish Yoruba Zulu Code 8471 8465 8469 8472 8479 8482 8475 8487 8575 8582 8590 8673 8679 6789 8779 8872 7473 8979 9085 Area Codes Choose an area code from this list. Area Afghanistan Argentina Australia Austria Belgium Bhutan Bolivia Brazil Cambodia Canada Chile China Colombia Congo Code AF AR AU AT BE BT BO BR KH CA CL CN CO CG Area Costa Rica Croatia Czech Republic Denmark Ecuador Egypt El Salvador Ethiopia Fiji Finland France Germany Great Britain Greece Code CR HR CZ DK EC EG SV ET FJ FI FR DE GB GR Area Greenland Hong Kong Hungary India Indonesia Israel Italy Jamaica Japan Kenya Kuwait Libya Luxembourg Malaysia Code GL HK HU IN ID IL IT JM JP KE KW LY LU MY Area Maldives Mexico Monaco Mongolia Morocco Nepal Netherlands Netherlands Antilles New Zealand Nigeria Norway Oman Pakistan Panama Code MV MX MC MN MA NP NL AN NZ NG NO OM PK PA Area Paraguay Philippines Poland Portugal Romania Russian Federation Saudi Arabia Senegal Singapore Slovak Republic Slovenia South Africa South Korea Spain Code PY PH PL PT RO RU SA SN SG SK SI ZA KR ES Area Sri Lanka Sweden Switzerland Taiwan Thailand Turkey Uganda Ukraine United States Uruguay Uzbekistan Vietnam Zimbabwe Code LK SE CH TW TH TR UG UA US UY UZ VN ZW 43 BD360-P-BISRBLK-ENG 9/17/09 11:41 AM Page 44 Troubleshooting Symptom Possible Cause Correction No power. • The power cord is disconnected. • Plug the power cord into the wall outlet securely. The power is on, but the player does not work. • No disc is inserted. • Insert a disc. (Check the disc indicator in the display window is lit.) No picture. • The TV is not set to receive video signal output. • Select the appropriate video input mode on the TV. • The video cable is not connected securely. • Connect the video cable securely. • The selected resolution is not capable with your TV. • Select another resolution using RESOLUTION button. • The equipment connected with the audio cable is not set to receive disc signal output. • Select the correct input mode of the audio receiver so you can listen to the sound from the player. • The power of the equipment connected with the audio cable is turned off. • Turn on the equipment connected with the audio cable. • The [AUDIO] options are set to the wrong position. • Set the [AUDIO] options to the correct position (see page 23). • The player is in reverse play, fast forward, slow motion or pause mode. • Return to the normal playback. • The disc is upside down. • Insert the disc with the playback side down. • An unplayable disc is inserted. • Insert a playable disc. (Check the disc type and regional code.) • The rating level is set. • Change the rating level. • The disc was recorded on another unit and was not finalized. • Finalize the disc on that unit. • The Remote Control is not pointed at the remote sensor on the player. • Point the Remote Control at the remote sensor of the player. • The Remote Control is too far from the player. • Operate the Remote Control closer to the player. No sound. The player does not start playback. The Remote Control does not work properly. 44 BD360-P-BISRBLK-ENG 9/17/09 11:41 AM Page 45 Troubleshooting Possible Cause Symptom Correction • A USB Flash Drive is not connected. • Connect a FAT16 or FAT32 formatted USB Flash Drive to the USB port (see page 20). • The connected USB Flash Drive does not have enough space. • Secure at least 1GB free space in the USB Flash Drive for using BD-Live features • Internet connection is not established. • Ensure that the unit is correctly connected to the local area network and can access the internet (see page 18). • Your broadband speed is not fast enough to use the BD-Live features. • Contact your Internet Service Provider (ISP) and increase the broadband speed is recommended. • The [BD-LIVE connection] option in the [Setup] menu is set to [Prohibited]. • Set the [BD-LIVE connection] option to [Permitted]. The YouTube video playback is often buffering. • Your broadband speed is not fast enough to play YouTube videos. • Contact your Internet Service Provider (ISP) and increase the broadband speed is recommended. The YouTube ID is not automatically stored in the ID list. • The ID list is full. • Delete one of the stored IDs and SignIn with the ID again. BD-Live feature does not work. Customer Support Resetting the unit You can update the Player using the latest software to enhance the products operation and/or add new features. To obtain the latest software for this player (if updates have been made), please visit http://lgservice.com or contact LG Electronics customer care centre. Design and specifications are subject to change without notice. If you observe any of the following symptoms. • The unit is plugged in, but the power will not turn on or off. • The front panel display is not working. • The unit is not operating normally. You can reset the unit as follows. • Press and hold the POWER button for at least five seconds. This will force the unit to power off then turn the unit back on. • Unplug the power cord, wait at least five seconds, and then plug it in again. 45 BD360-P-BISRBLK-ENG 9/17/09 11:41 AM Page 46 Specifications General System Power requirements: AC 200-240 V, 50/60 Hz Power consumption: 18W Laser: Semiconductor laser, wavelength: 405nm / 650 nm Dimensions (W x H x D): Approx. 430 x 54 x 245 mm without foot Signal system: Standard PAL/NTSC colour TV system Net Weight (Approx.): 2.7 kg Frequency response: Operating temperature: 5 °C to 35 °C 20 Hz to 20 kHz (48 kHz, 96 kHz, 192 kHz sampling) Operating humidity: 5 % to 90 % Signal-to-noise ratio: More than 100 dB (ANALOG OUT connectors only) Harmonic distortion: Less than 0.008% Dynamic range: More than 95 dB LAN port: Ethernet jack x 1, 10BASE-T/100BASE-TX Outputs VIDEO OUT: 1.0 V (p-p), 75 Ω, sync negative, RCA jack x 1 COMPONENT VIDEO OUT: (Y) 1.0 V (p-p), 75 Ω, sync negative, RCA jack x 1 (Pb)/(Pr) 0.7 V (p-p), 75 Ω, RCA jack x 2 HDMI OUT (video/audio): 19 pin (HDMI standard, Type A) ANALOG AUDIO OUT: 2.0 Vrms (1 kHz, 0 dB), 600 Ω, RCA jack (L, R) x 1 DIGITAL OUT (COAXIAL): 0.5 V (p-p), 75 Ω, RCA jack x 1 DIGITAL OUT (OPTICAL): 3 V (p-p), Optical jack x 1 46 Accessories Video cable (1), Audio cable (1), Remote control (1), Battery (1) BD360-P-BISRBLK-ENG 9/17/09 11:41 AM Page 47 IMPORTANT INFORMATION RELATING TO NETWORK SERVICES PLEASE READ CAREFULLY. USE OF THE NETWORK SERVICES IS SUBJECT TO THE FOLLOWING TERMS AND CONDITIONS. Use of the Network Services requires an Internet connection which is sold separately and for which you are solely responsible. The Network Services may be limited or restricted depending upon the quality, capabilities and technical limitations of your Internet service. The Network Services belong to third parties and may be protected by copyright, patent, trademark and/or other intellectual property laws. The Network Services are provided solely for your personal and noncommercial use. Unless expressly authorized by the respective content owner or service provider, you shall not modify, copy, republish, upload, post, transmit, translate, sell, create derivative works, exploit, or distribute in any manner or medium any content or services accessible through this product. LG IS NOT RESPONSIBLE FOR YOUR USE OF THE NETWORK SERVICES. THE NETWORK SERVICES ARE PROVIDED “AS IS.” TO THE FULLEST EXTENT PERMISSIBLE BY LAW, LG MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND WHATSOEVER (i) FOR THE ACCURACY, VALIDITY, TIMELINESS, LEGALITY, OR COMPLETENESS OF ANY NETWORK SERVICE MADE AVAILABLE THROUGH THIS PRODUCT; OR (ii) THAT THE NETWORK SERVICES ARE FREE OF VIRUSES OR OTHER COMPONENTS THAT MAY INFECT, HARM, OR CAUSE DAMAGE TO THIS PRODUCT, YOUR COMPUTER, TELEVISION, OTHER EQUIPMENT, OR ANY OTHER PROPERTY. LG EXPRESSLY DISCLAIMS ANY IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO, WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. UNDER NO CIRCUMSTANCES AND UNDER NO LEGAL THEORY, WHETHER IN CONTRACT, TORT, STRICT LIABILITY OR OTHERWISE, SHALL LG BE LIABLE TO YOU OR ANY THIRD PARTY FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, STATUTORY, CONSEQUENTIAL OR OTHER DAMAGES OR ATTORNEY FEES OR EXPENSES RELATING TO OR ARISING OUT OF THE NETWORK SERVICES EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR IF SUCH DAMAGES COULD HAVE BEEN REASONABLY FORESEEN. The Network Services may be terminated or interrupted at any time, and LG makes no representation or warranty that any Network Service will remain available for any period of time. Use of the Network Services may be subject to additional terms and conditions of the respective third party service provider. The Network Services are transmitted by third parties by means of networks and transmission facilities over which LG has no control. LG EXPRESSLY DISCLAIMS ANY RESPONSIBILITY OR LIABILITY FOR ANY INTERRUPTION OR SUSPENSION OF ANY NETWORK SERVICE. LG shall be neither responsible nor liable for customer service related to the Network Services. Any question or request should be made directly to the respective Network Service providers. “Network Service(s)” means the third party services accessible through this product including but not limited to all data, software, links, messages, video and other content found thereon or used in connection therewith. “LG” means LG Electronics, Inc. its parent company and all of their respective subsidiaries, affiliates and related companies worldwide. 47 BD360-P-BISRBLK-ENG 9/17/09 11:41 AM Page 48 Open source software notice This product includes • Freetype library : copyright © 2003 The FreeType Project (www.freetype.org). • Zlib compression library: Copyright © 1995-2002 Jean-loup Gailly and Mark Adler. • Expat library : copyright © 2006 expat maintainers. • OpenSSL library : - cryptographic software written by Eric Young (firstname.lastname@example.org). - software written by Tim Hudson (email@example.com). - software developed by the OpenSSL Project for use in the OpenSSL Toolkit. (http://www.openssl.org) This product includes other open source software. • Copyright © 1995, 1996, 1997 Kungliga Tekniska Hogskolan (Royal Institute of Technology, Stockholm, Sweden). • Copyright © 1995-2008 International Business Machines Corporation and others • Copyright © 1999, ASMUS, Inc. Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the “Software”), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions: THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. 48 • HarfBuzz IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE TO ANY PARTY FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN IF THE COPYRIGHT HOLDER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. THE COPYRIGHT HOLDER SPECIFICALLY DISCLAIMS ANY WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE SOFTWARE PROVIDED HEREUNDER IS ON AN “AS IS” BASIS, AND THE COPYRIGHT HOLDER HAS NO OBLIGATION TO PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS.
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project