LG | 24CK560N-3A | User manual | LG 24CK560N-3A Gebruikershandleiding

LG 24CK560N-3A Gebruikershandleiding
OWNER’S MANUAL
Please read this manual carefully before operating your set and retain it for future reference.
24CK560N
www.lg.com
Copyright © 2019 LG Electronics Inc. All Rights Reserved.
ENGLISH
TABLE OF CONTENTS
ON CLEANING
ON CLEANING...............................................................................2
Recommended Cleaning Chemicals
IMPORTANT NOTES ON INSTALLING AN OPERATING SYSTEM......3
•• Isopropanol 70 %
•• Ethanol 70 %
•• Cidex® OPA
•• 0.9 % NaCl solution
ASSEMBLY AND PREPARING.........................................................4
How to Use Cleaner
LICENSE........................................................................................3
USING THE MONITOR..................................................................17
USER SETTINGS..........................................................................20
TROUBLESHOOTING...................................................................26
PRODUCT SPECIFICATION...........................................................28
2
•• Prior to cleaning, turn off the monitor and remove the power cable.
•• Soak a soft cloth in a recommended cleaner, then lightly rub the screen with no more than 1 N of force.
•• The cleaner could cause serious damage if it leaks inside the monitor while cleaning.
•• The display could be damaged, so only clean the parts of the monitor other than the screen's LCD panel.
•• Do not use benzene, thinner, acids or alkaline cleaners or other such solvents.
•• Cleaning guidelines for displays must only be carried out by medical professionals (doctors or nurses) and
must not be handled by patients.
LICENSE
Each model has different licenses. Visit www.lg.com for more information on the license.
This product does not provide an operating system to run the product.
Please note that LG Electronics does not sell an operating system such as Windows, and users are required to
purchase and install an operating system to run the product. For more information on purchasing Windows
operating systems, please contact Microsoft directly.
Due to the characteristics of the product, only Windows 10 IoT Enterprise LTSB 2016 (RS1) is available for
installation. LG Electronics will not be liable for any issues caused by installing and using an operating system
other than Windows 10 IoT Enterprise LTSB 2016 (RS1).
ENGLISH
The terms HDMI and HDMI High-Definition Multimedia Interface,
and the HDMI Logo are trademarks or registered trademarks of
HDMI Licensing Administrator, Inc. in the United States and other
countries.
IMPORTANT NOTES ON INSTALLING AN
OPERATING SYSTEM
How to install Windows 10 IoT Enterprise LTSB 2016
(RS1)
Follow the steps below to install Windows when you purchase and install Windows 10 IoT Enterprise LTSB 2016
(RS1).
For more information on installing Windows, refer to the manual or guide provided with Windows.
1
Install Windows
2
Install Drivers
3
Update Windows
Complete Installing
Windows
3
ASSEMBLY AND PREPARING
ENGLISH
Product Composition
Please check whether all the components are included in the box before using the product. If there are any missing components, contact the retailer where you purchased the product.
Note that the product and related components may look different from those shown here.
CD (Owner's Manual)/Regulatory Manual/
Cards
Stand Body/Stand Base
4
Power Cord
AC/DC Adaptor
Side Door
Cable Holder
CAUTION
Component
Power Cord
Supported Drivers, Software and Language pack install
guide
(Only
)
•• You can download and install the latest version from the LGE website (www.lg.com).
ENGLISH
•• Always use genuine LG components to ensure safety and product performance.
•• The product warranty will not cover damage or injury caused by the use of unauthorized components.
•• It is recommend that use the supplied components.
•• If you use generic cables not certified by LG, the screen may not display or there may be image noises.
•• Need to use the authorized components about the below accessories. Unauthorized components may be
cause of the damage and malfunction of the product.
Standard
US – Approved Medical grade regulation
Others – Approved country safety regulation
•• The AC/DC adaptors and etc. except the upper components need to be used only supplied by manufacturer.
NOTE
•• The components may look different from those illustrated here.
•• Without prior notice, all product information and specifications contained in this manual are subject to
change to improve the performance of the product.
•• To purchase optional accessories, visit an electronics store or an online shopping site, or contact the retailer
from which you purchased the product.
•• The power cord provided may differ depending upon the region.
•• Some games (online, 3D, 2D) may not be supported, and some high-resolution videos (including Full HD and
some HD videos) may stutter during playback.
5
Product and Button Description
Front Adjust Button Functions Information
Button
ENGLISH
(Menu)
Description
If the menu is inactive
Activates the main menu.
If the menu is active
Exits the OSD menu when the button is pressed.
If the menu is inactive
Adjusts the volume level of the monitor.
If the menu is active
Left directional key.
If the menu is inactive
Adjusts the volume level of the monitor.
If the menu is active
Right directional key.
If the menu is inactive
Change the input signals. The input signal (HDMI/PC)
will be changed sequentially.
If the menu is active
* When the input signal is changed to PC, the PC is
turned on. (Depending on the PC setting)
Selects and confirms menus or options.
Down directional key.
Up directional key.
(Power button)
Power
Button
Power
Indicator
Turn the monitor power on/off.
PC input
Turn the PC power on/off.
Power Indicator
Mode
PC On
PC Sleep
PC Off
6
HDMI input
LED Color
White
Blinking
Off
Moving and Lifting the Monitor
Connectors
USBUSB
IN IN
LANLAN
DP OUT
DP OUT
CAUTION
USBUSB
IN IN
DC-IN
DC-IN
ENGLISH
When moving or lifting the monitor, follow these instructions to prevent the monitor from being scratched or
damaged and to ensure safe transportation, regardless of its shape or size.
•• Place the monitor in the original box or packing material before attempting to move it.
•• Before moving or lifting the monitor, disconnect the power cord and all other cables.
•• Hold the bottom and side of the monitor frame firmly. Do not hold the panel itself.
•• When holding the monitor, the screen should face away from you to prevent it from being scratched.
•• When transporting the monitor, do not expose the monitor to shock or excessive vibration.
•• When moving the monitor, keep it upright and never turn the monitor on its side or tilt it sideways.
•• Avoid touching the monitor screen as much as possible.
-- This may result in damage to the screen or some of the pixels used to create images.
•• If you use the monitor panel without the stand base, its button may cause the monitor to become unstable
and fall, resulting in damage to the monitor or human injury. In addition, this may cause the button to
malfunction.
HDMI
IN IN
HDMI
7
Installing the Monitor
2
Assemble the Stand
ENGLISH
•• Note that the product may look different from the illustrations in this user manual.
1
Side Door
CAUTION
•• To protect the screen from scratches, cover the surface with a soft cloth.
8
3
4
ENGLISH
Cable Holder
* Assemble the Cable Holder.
Stand Body
2
1
Stand Base
or
9
NOTE
•• Press the stand until the button rises to maximum height.
ENGLISH
CAUTION
•• Illustrations in this document represent typical procedures, so they may look different from the actual
product.
•• Do not use foreign substances (oil, lubricants) when assembling the product. (This may damage the product)
•• Applying excessive force when tightening screws may cause damage to the monitor. Damage caused in this
way will not be covered by the product warranty.
•• Do not carry the monitor upside down by just holding the stand base. This may cause the monitor to fall off
the stand and could result in personal injury.
•• When lifting or moving the monitor, do not touch the monitor screen. The force applied to the monitor screen
may cause damage to it.
NOTE
•• The stand can be disassembled by following the assembly steps in the opposite order.
10
Tidying up Cables
Arrange the cables using cable holders as shown in the illustration.
2 Connect the power cord to the monitor and then plug the power cord into the wall outlet.
Installing on a Table
1 Lift the monitor and place it on the table in an upright position. Place the monitor at least 100 mm away
from the wall to ensure sufficient ventilation.
100 mm
ENGLISH
100 mm
100 mm
2
3
100 mm
1
3 Press the
button on the front of the monitor to turn on the monitor.
CAUTION
•• Unplug the power cord before moving or installing the monitor. There is risk of electric shock.
•• Make sure to use the power cord that is provided in the product package and connect it to a grounded power
outlet.
•• If you need another power cord, please contact your local dealer or the nearest retail store.
11
Adjusting the Stand Height
Swivel stand
1 Place the monitor mounted on the stand base in an upright position.
2 Handle the monitor with both hands for safety.
Swivel 355 degrees and adjust the angle of the Monitor set to suit your view.
ENGLISH
Max. 130.0 mm
WARNING
•• When adjusting the screen height, do not place your hand on the stand body to avoid injury to your fingers.
Adjusting the Angle
Pivot Feature
The pivot feature allows the monitor to rotate 90 degrees clockwise or counter-clockwise.
1 Place the monitor mounted on the stand base in an upright position.
2 Adjust the angle of the screen.
The angle of the screen can be adjusted forward or backward from -5° to 35° for a comfortable viewing
experience.
Head
WARNING
•• To avoid injury to the fingers when adjusting the screen, do not hold the lower part of the monitor’s frame as
illustrated below.
•• Be careful not to touch or press the screen area when adjusting the angle of the monitor.
Stand
WARNING
•• To avoid scratching the stand base, do not use excessive force or speed when rotating the monitor using the
pivot feature, and make sure that the stand does not make contact with the monitor.
12
1 Raise the monitor up to the maximum height.
3 Rotate the monitor clockwise or counter-clockwise as shown in the figure.
ENGLISH
2 Adjust the angle of the monitor in the direction of the arrow as shown in the figure.
4 Complete the installation by rotating the monitor 90° as shown in the figure.
13
NOTE
ENGLISH
•• Auto Pivot feature of the display is not supported.
•• The screen can be rotated easily using the screen pivot shortcut key provided with your Windows operating
system. Note that some Windows versions and some graphics card drivers may use different settings for the
screen pivot key or may not support the pivot key at all.
•• Windows operating system screen pivot shortcut key.
-- 0°: Ctrl + Alt + keyboard up key ( )
-- 90°: Ctrl + Alt + keyboard left key ( )
-- 180°: Ctrl + Alt + keyboard down key ( )
-- 270°: Ctrl + Alt + keyboard right key ( )
Using the Kensington Lock
The connector for the Kensington security system is located at the back of the monitor.
For more information on installation and usage, refer to the Kensington lock owner’s manual or visit the website
at http://www.kensington.com.
Connect the monitor to a table using the Kensington security system cable.
WARNING
•• Take care when rotating the monitor if the cable is connected.
•• To avoid injury to your fingers, do not put them between the screen and the stand base when turning the
monitor's screen.
NOTE
•• The Kensington security system is optional. You can obtain optional accessories from most electronics stores.
14
Installing the Wall Mount Plate
Install the monitor at least 100 mm away from the wall and leave about 100 mm of space at each side of the
monitor to ensure sufficient ventilation. Detailed installation instructions can be obtained from your local retail
store. Alternatively, please refer to the manual for how to install and set up a tilting wall mounting bracket.
This monitor meets the specifications for the wall mount plate or other compatible devices.
To install the monitor to a wall, attach a wall mounting bracket (optional) to the back of the monitor.
Make sure that the wall mounting bracket is securely fixed to the monitor and to the wall.
100 mm
100 mm
100 mm
Wall Mount (mm)
Standard screw
Number of screws
Wall Mount Plate (Optional)
100 x 100
M4 x L10
4
LSW149
ENGLISH
Installing on the Wall
100 mm
100 mm
NOTE
•• A non-VESA standard screw may damage the product and cause the monitor to fall. LG Electronics is not
liable for any accidents relating to the use of non-standard screws.
•• The wall mount kit includes the installation guide and all necessary parts.
•• The wall mounting bracket is optional. You can obtain optional accessories from your local dealer.
•• The length of the screw may differ for each wall mounting bracket. If you use screws longer than the standard
length, it may damage the inside of the product.
•• For more information, please refer to the user manual for the wall mounting bracket.
•• Be careful not to apply too much force while mounting the wall mount plate as it may cause damage to the
screen.
•• Remove the stand before installing the monitor on a wall mount by performing the stand attachment in
reverse.
15
CAUTION
ENGLISH
•• Unplug the power cord before moving or installing the monitor to avoid electric shock.
•• Installing the monitor on the ceiling or on a slanted wall may result in the monitor falling off, which could
lead to injury. Use an authorized LG wall mount and contact the local dealer or qualified personnel.
•• To prevent injury, this apparatus must be securely attached to the wall in accordance with the installation
instructions.
•• Applying excessive force when tightening screws may cause damage to the monitor. Damage caused in this
way will not be covered by the product warranty.
•• Use the wall mounting bracket and screws that conform to VESA standards. Damage caused by the use or
misuse of inappropriate components will not be covered by the product warranty.
•• When measured from the back of the monitor, the length of each installed screw must be 8 mm or less.
Wall Mount Plate
Back of the Monitor
Wall Mount Plate
Back of the Monitor
Standard screw:
M4 x L10
Max. 8 mm
16
USING THE MONITOR
CAUTION
CAUTION
•• Always use genuine LG components to ensure safety and product performance.
•• Do not press the screen for a prolonged time. This may cause image distortion.
•• Do not display a still image on the screen for a prolonged time. This may cause image retention. Use a
screensaver if possible.
•• When connecting the power cord to the outlet, use a grounded (3-hole) power strip or a grounded power
outlet.
•• The monitor may flicker when turned on in an area where the temperature is low. This is normal.
•• Sometimes red, green, or blue spots may appear on the screen. This is normal.
Connecting PC
ENGLISH
•• Illustrations in this manual may differ from the actual product.
Press the ( /
) button and then select the input option.
•• Using a DVI to HDMI/DP (DisplayPort) to HDMI cable may cause compatibility issues.
•• Use a certified cable with the HDMI logo attached. If you do not use a certified HDMI cable, the screen may
not display or a connection error may occur.
•• Recommended HDMI cable types
-- High-Speed HDMI®/TM cable
-- High-Speed HDMI®/TM cable with Ethernet
Connecting monitor
DisplayPort Connection
Transmits the PC's digital video and audio signals to the monitor. Connect your monitor which is supported DP
using the DisplayPort cable.
(Monitor)
•• This monitor supports the *Plug and Play feature.
(Monitor)
(Sold separately)
* Plug and Play: A feature that allows you to add a device to your computer without having to reconfigure
anything or install any manual drivers.
NOTE
•• There may be no video or audio output depending on the DP (DisplayPort) version of the PC.
HDMI Connection
Transmits digital video and audio signals from your PC to the monitor.
(Monitor)
(PC)
(Sold separately)
17
Connecting LAN
Connecting Peripherals
LAN connection
USB Cable connection - PC
ENGLISH
Connect the router or switch to the monitor.
NOTE
NOTE
•• It is recommended you install all Windows Updates to keep your Windows up-to-date before connecting to
the product for use.
•• Peripheral devices are sold separately.
•• A keyboard, mouse, or USB device can be connected to the USB port.
•• The charging speed may vary depending on the device.
•• The LAN cable is sold separately.
•• The following LAN cable type can be used: Standard: IEEE 802.3 ETHERNET
•• Connect the LAN cable and the peripheral devices to use the cloud monitor.
(Monitor)
(LAN)
(Sold separately)
Connecting AV Devices
HDMI Connection
HDMI transmits digital video and audio signals from your AV device to the monitor.
(Monitor)
(AV device)
(Sold separately)
NOTE
•• Using a DVI to HDMI/DP (DisplayPort) to HDMI cable may cause compatibility issues.
•• Use a certified cable with the HDMI logo attached. If you do not use a certified HDMI cable, the screen may
not display or a connection error may occur.
•• Recommended HDMI cable types
-- High-Speed HDMI®/TM cable
-- High-Speed HDMI®/TM cable with Ethernet
18
CAUTION
Cautions when using a USB device.
•• A USB device with an automatic recognition program installed, or that uses its own driver, may not be
recognized.
•• Some USB devices may not be supported or may not work properly.
•• It is recommended to use a USB hub or hard disk drive with power supplied. (If the power supply is not
adequate, the USB device may not be recognized properly.)
Connecting Headphones and Microphone
Connect peripherals to the monitor via the headphones and Microphone port.
NOTE
Angled
ENGLISH
•• Peripheral devices are sold separately.
•• Depending on the audio settings of the PC and external device, headphones and speaker functions may be
limited.
•• If you use angled earphones, it may cause a problem with connecting another external device to the monitor.
Therefore, it is recommended to use straight earphones.
Straight
(Recommend)
19
USER SETTINGS
NOTE
ENGLISH
•• Your monitor’s OSD (On Screen Display) may differ slightly from that shown in this manual.
Activating the Main Menu
Monitor buttons
Menu Settings
1
2
3
4
To view the OSD menu, press the button and then enter the Settings.
Use the
to adjust the options.
To return to the upper menu or set other menu items, press the or /
If you want to exit the OSD menu, press the button.
it.
The applicable setting options are as shown below.
[Quick Settings]
20
[Picture]
[Sound]
[General]
[Reset]
[Quick Settings]
Adjusts the brightness of the screen.
Description
[Contrast]
Adjusts the color contrast of the screen.
[Volume]
Adjusts the volume level.
ENGLISH
> [Quick Settings]
[Brightness]
NOTE
•• You can adjust [Mute]/[Unmute] by key in the [Volume] menu.
[Ratio]
[SMART ENERGY SAVING]
Adjusts the screen ratio.
[Wide]
Displays the video in wide-screen, regardless of the video signal input.
[Original]
Displays a video according to the input video signal aspect ratio.
Conserve energy by using luminance compensation algorithm.
[High]
Enables [SMART ENERGY SAVING] you can save energy with this energy- high efficient.
[Low]
Enables [SMART ENERGY SAVING] you can save energy with this energy- low efficient.
[Off]
Disables [SMART ENERGY SAVING].
NOTE
•• The [Ratio] is disabled in the interlaced signal.
•• If option of [SMART ENERGY SAVING] is [High] or [Low], monitor luminance become higher or lower depend on source.
21
[Picture]
> [Picture]
ENGLISH
[Picture Mode]
[Custom]
[Reader]
[Photo]
[Color Weakness]
Description
Allows the user to adjust each element. The color mode of the main menu can be adjusted.
Optimizes the screen for reading documents.
Optimizes the screen to view photos.
This mode is for users who cannot distinguish red. It enables users with color weakness to easily distinguish between the two colors.
NOTE
[Picture Adjust]
[SUPER RESOLUTION+]
[Sharpness]
[Black Level]
[DFC]
22
•• This is subsidiary for color weakness user. Therefore if you feel uncomfortable with the screen, please turn off this function.
•• This function can’t distinguish some colors in some images.
[High]
Optimized picture quality is displayed when a user wants crystal clear images. It is effective for high quality video.
[Middle]
The optimized picture quality is displayed when a user wants images between low and high modes for comfortable viewing.
It is effective for SD video.
[Low]
The optimized picture quality is displayed when a user wants smooth and natural images.
It is effective for slow-moving pictures or still images.
[Off]
Select this option for everyday viewing. [SUPER RESOLUTION+] is turned off in this mode.
Adjusts the sharpness of the screen.
Sets the offset level. (HDMI only)
•• Offset: A reference for video signals. Offset is the darkest color that the monitor can display.
[High]
Keeps the current contrast ratio of the screen.
[Low]
Lowers the black levels and raises the white levels from the current contrast ratio of the screen.
[On]
Adjusts the brightness automatically according to the screen.
[Off]
Disables the [DFC] feature.
> [Picture]
[Picture Adjust]
[Response Time]
[Color Adjust]
[Gamma]
[Mode 4]
[Color Temp]
[Red]
[Warm]
If you do not need to adjust the gamma settings, select [Mode 4].
Sets the screen color to a reddish tone.
[Medium]
Sets the screen color to between a red and blue tone.
[Cool]
Sets the screen color to a bluish tone.
[Custom]
The user can adjust it to red, green, or blue by customization.
ENGLISH
[Black Stabilizer]
Description
Sets a response time for displayed pictures based on the movement of the picture on the screen.
For a normal environment, it is recommended that you use [Fast]. When there is a lot of motion, it is recommended that you use [Faster].
Setting to [Faster] may cause image sticking.
[Faster]
Sets the response time to Faster.
[Fast]
Sets the response time to Fast.
[Normal]
Sets the response time to Normal.
[Off]
Does not use the response time improvement feature.
You can control the black contrast to have better visibility in dark scenes. Increasing the [Black Stabilizer] value brightens the low gray level area on the screen.
Reducing the [Black Stabilizer] value darkens the low gray level area and increases the dynamic contrast on the screen.
[Mode 1] [Mode 2] The higher the gamma value, the darker the image becomes. Likewise, the lower the gamma value, the lighter the image becomes.
[Mode 3]
You can customize the picture color using [Red], [Green], and [Blue] colors.
[Green]
[Blue]
[Six Color]
[Reset]
[Hue]
Adjusts the tone of the screen colors.
[Saturation]
Adjusts the saturation of the screen colors. The lower the value, the less saturated and brighter the colors become. The higher the value, the
more saturated and darker the colors become.
[Reset]
Returns the color settings to the default settings.
[Cancel]
Cancel the select.
23
[Sound]
> [Sound]
ENGLISH
[MaxxAudio]
[MaxxAudio Settings]
[Midnight Mode]
Description
[On]
MaxxAudio® by Waves, recipient of a Technical GRAMMY Award® is a suite of studio-quality sound tools for a superior listening experience.
[Off]
Disables the [MaxxAudio] function.
The user can set the sound quality manually.
[MaxxBass]
Bass Enhancement.
[MaxxTreble]
Treble Enhancement.
[MaxxDialog]
Dialog Enhancement.
[Maxx3D]
Enhances the three dimensional effect of the sound.
[Reset]
[Reset]
Returns the sound quality to the default settings.
[Cancel]
Cancel the select.
[On]
Lets you enjoy rich and full sound at a low volume.
[Off]
Disables [Midnight Mode].
[General]
> [General]
[Language]
Description
Sets the menu screen to the desired language.
[Automatic Standby]
Feature that automatically turns off the monitor when there is no movement on the screen for a period of time. You can set a timer for the auto-off function. ([Off], [4H], [6H], and [8H]) (only
for HDMI)
[OSD Lock]
This feature disables the configuration and adjustment of menus.
[On]
Enables [OSD Lock].
[Off]
Disables [OSD Lock].
NOTE
•• Deactivates all functions except [Brightness], [Contrast], [Volume] and [OSD Lock] menu.
24
[Reset]
> [Reset]
Description
[Reset]
[Cancel]
Returns to the default settings.
Cancel the select.
ENGLISH
[Do you want to reset your settings?]
25
TROUBLESHOOTING
ENGLISH
Nothing is displayed on the screen.
Is the monitor's power cord plugged in?
•• Check if the power cord is correctly plugged into the power outlet.
Is the power LED on?
•• Check the power cable connection and press the power button.
Is the power on and the power LED displaying?
•• Change the input by pressing the
Is the [No Signal] message being displayed?
•• This is displayed when the signal cable between the PC and the monitor is missing or disconnected. Check the cable and reconnect it.
Is the [Out of Range] message being displayed?
•• This occurs when signals transferred from the PC (graphics card) are out of the horizontal or vertical frequency range of the monitor. Please see the
Product Specification section of this manual to set the appropriate frequency.
/
key.
Screen display is unstable and shaky. / Images displayed on the monitor leave shadow trails.
Did you select the appropriate resolution?
•• If the selected resolution is HDMI 1080i 60/50 Hz (interlaced), the screen may be flickering. Change the resolution to 1080p or the recommended
resolution.
•• Not setting the graphics card to the recommended (optimal) resolution may result in blurred text, a dimmed screen, a truncated display area or
misalignment of the display.
•• The setting methods may be different depending on the computer or operating system, and some resolutions may not be available depending on the
performance of the graphics card. If this is the case, contact the manufacturer of the computer or graphics card for assistance.
Does image sticking occur even when the monitor is turned off?
•• Displaying a still image for a prolonged time may cause damage to the screen, resulting in the retention of the image.
•• To extend the lifetime of the monitor, use a screensaver.
Are there spots on the screen?
•• When using the monitor, pixilated spots (red, green, blue, white, or black) may appear on the screen. This is normal for an LCD screen. It is not an error,
nor is it related to the monitor's performance.
Some features are disabled.
Are some functions not available when you press the Menu button?
26
•• The OSD is locked. Disable [OSD Lock] in [General].
Do you see an "Unrecognized monitor, Plug and Play (VESA DDC) monitor found" message?
Have you installed the display driver?
•• Be sure to install the display driver from our web site: http://www.lg.com.
•• Make sure to check if the graphics card supports Plug and Play function.
Are images displayed without sound?
•• Make sure that the headphone port connections are made properly.
•• Try increasing the volume with keys.
•• Set the audio output of the PC to the monitor you are using. (The settings may differ depending on the operating system (OS) you use.)
ENGLISH
No sound from the headphone port.
27
PRODUCT SPECIFICATION
ENGLISH
The product specifications are subject to change without prior notice for product improvements.
“ ~ ” refers to alternating current (AC), “
” refers to direct current (DC).
Color Depth
8-bit color is supported.
Resolution
1920 x 1080 @ 60Hz
Input Connectors
Power Rating
Power Sources
Power Consumption
Operating Conditions
Environmental Conditions
AC/DC Adapter
28
Storing Conditions
19 V
3.42 A
Operating Mode:
-- MNT only: 23.6 W (Typical) *
-- With PC: 38.2 W (Typical) *
Sleep Mode: ≤ 0.9 W **
Off Mode: ≤ 0.7 W **
Temperature
0 °C to 40 °C
Humidity
0 % to 80 %
Pressure
700 hPa to 1060 hPa
Temperature
-20 °C to 60 °C
Humidity
0 % to 85 %
Pressure
500 hPa to 1060 hPa
Manufacturer: Asian Power Devices Inc. (APD)
Model: DA-65J19
Input: 100-240 V~ 50-60 Hz, 1.5-0.7 A
Output: 19 V
3.42 A
Classification by protection type against Electric Shock: Class I
Monitor Size (Width x Depth x Height)
With Stand
Dimensions
Without Stand
553.8 x 240 x 382.9 (mm)
553.8 x 240 x 512.9 (mm)
553.8 x 67.6 x 333.1 (mm)
With Stand
Without Stand
6.1 kg
4.0 kg
ENGLISH
Weight (Without Packaging)
Min.
Max.
* The Operating Mode of Power Consumption is measured with LGE test standard. (Full White pattern, Maximum resolution)
* The Power Consumption level can be different by operating condition and monitor setting.
** The PC Sleep mode and Off mode is measured with monitor outgoing condition.
Dual Band Wireless module (AC3168) Specifications
Wireless LAN
Standard
IEEE 802.11a/b/g/n/ac
Frequency Range
Output Power (Max.)
2400 to 2483.5 MHz
5150 to 5725 MHz
5725 to 5850 MHz
15.5 dBm
15.5 dBm
15.5 dBm
Bluetooth
Frequency Range
Output Power (Max.)
2400 to 2483.5 MHz
10 dBm
•• As band channels can vary per country, the user cannot change or adjust the operating frequency. This
product is configured for the regional frequency table.
•• For consideration of the user, this device should be installed and operated with a minimum distance of 20
cm between the device and the body.
•• IEEE 802.11ac is not available in all countries.
29
Factory Support Mode
HDMI
ENGLISH
30
Preset Mode
Horizontal Frequency (kHz)
Vertical Frequency (Hz)
Polarity (H/V)
640 x 480
31.469
59.94
-/-
640 x 480
37.5
75
-/-
720 x 400
31.468
70.08
-/+
800 x 600
37.879
60.317
+/+
800 x 600
46.875
75.0
+/+
1024 x 768
48.363
60.0
-/-
1024 x 768
60.023
75.029
+/+
1152 x 864
67.500
75.000
+/+
1280 x 1024
63.981
60.02
+/+
1280 x 1024
79.976
75.025
+/+
1680 x 1050
65.290
59.954
-/+
1920 x 1080
67.50
60
+/+
Remarks
HDMI Timing (Video)
Horizontal
frequency
(KHz)
31.5
31.25
37.5
45
Vertical
frequency
(Hz)
60
50
50
60
1080P
56.25
50
O
1080P
67.5
60
O
HDMI
Remarks
O
O
O
O
ENGLISH
Factory support
mode
(Preset Mode)
480P
576P
720P
720P
Recommend
31
WARNING: This equipment is compliant with Class A of CISPR 32. In a residential environment this equipment may cause
radio interference.
The model and serial number of the product are located on the back and on one side of the product. Record them below
in case you ever need service.
Model
Serial No.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising