LG | 32MN49HM-PT | User manual | LG 32MN49HM-PT Buku Manual

LG 32MN49HM-PT Buku Manual
LED MONITOR
32MN49HM
X2
(M4 X L16)
AAA
www.lg.com
*MFL69560323*
(1710-REV00)
English Read Safety and Reference.
Depending on model
1
2
3
1
2
4
HDMI IN 1
HDMI OUT
USB IN
HDMI IN 2
5V
COMPONENT IN
Y
PB
PR
DC-IN
(19 V
COMPONENT IN
Y
PB
PR
VIDEO
AV IN
VIDEO
R
L
L
(MONO)
)
AUDIO R
AUDIO
VIDEO
(MONO)
COMPONENT IN
Y
PB
PR
VIDEO
AV IN
R
L
L
AV IN
0.5 A
AUDIO R
L
L
(MONO)
R
AUDIO R
VIDEO L/MONO AUDIOR
H/P
DC-IN
(19 V
1
2
3
4
)
3
2
1
DC-IN
(19 V
1
)
2
OWNER’S MANUAL
Safety and Reference
LED MONITOR*
* LG LED Monitors are LCD Monitors with LED
Backlighting.
Please read this manual carefully before operating your set
and retain it for future reference.
32MN49HM
*MFL69560313*
(1710-REV00)
www.lg.com
Copyright ⓒ 2017 LG Electronics Inc. All Rights Reserved.
TABLE OF CONTENTS
ENG
ENGLISH
2
3
Safety precautions
5
Licenses
5
Open Source Software Notice Information
6
Preparing
6
Moving and lifting the monitor
7
Installing the monitor
7
Using the joystick button
7
Basic functions
7
Mounting on a table
8
Using the kensington security system
8
Mounting on a wall
8
Separate purchase (Wall mounting bracket)
9
Connections (Notifications)
9
9
Other connections
Connecting to a PC
9
Remote control
10
Setting the monitor
11
Settings
14
Maintenance
14
14
14
14
Cleaning your monitor
Screen, frame, cabinet, and stand
Power cord
Preventing “Image burn” or “Burn-in” on your monitor screen
14
Troubleshooting
15
Specifications
17
Service
Safety precautions
Please read these safety precautions carefully before using the product.
CAUTION
If you ignore the caution message, you may be slightly injured or
the product may be damaged.
Precautions in installing the product
WARNING
•• Keep away from heat sources like electrical heaters.
►
shock, fire, malfunction or deformation may occur.
►Electrical
•• Keep the packing anti-moisture material or vinyl packing out of the
reach of children.
►
material is harmful if swallowed. If swallowed by
►Anti-moisture
mistake, force the patient to vomit and visit the nearest hospital.
Additionally, vinyl packing can cause suffocation. Keep it out of the
reach of children.
•• Do not put heavy objects on the product or sit upon it.
►If► the product collapses or is dropped, you may be injured. Children
must pay particular attention.
•• Do not leave the power or signal cable unattended on the pathway.
► passerby can falter, which can cause electrical shock, fire,
►The
product breakdown or injury.
•• Install the product in a neat and dry place.
► or moisture can cause electrical shock, fire or product
►Dust
damage.
•• If you can smell smoke or other odors or hear a strange sound unplug
the power cord and contact the service center.
►If► you continue to use without taking proper measures, electrical
shock or fire can occur.
•• If you dropped the product or the case is broken, turn off the product
and unplug the power cord.
►►If you continue to use without taking proper measures, electrical
shock or fire can occur. Contact the service center.
•• Do not drop an object on or apply impact to the product. Do not
throw any toys or objects on the product screen.
►It► can cause injury to human, problem to product and damage the
display.
•• Do not let the product fall or drop when connecting it with an
external device.
► may cause injury and/or damage to the product.
►This
•• When connecting it with a game device, keep a distance of four times
as long as the diagonal measurement of the screen from the device.
►If► the product falls because of the short cable, this may cause
injury and/or damage to the product.
•• Leaving a fixed image on the screen for a long time may cause
damage to the screen and cause image burn-in. To use the product
for a long period of time, use a screen saver on the PC or utilize the
ENGLISH
ENG
WARNING
If you ignore the warning message, you may be seriously injured
or there is a possibility of accident or death.
residual image prevention function on the product, and when the
product is not used, turn off the power. Burn-in and related problems
are not covered by the warranty on this product.
•• Do NOT install this product on a wall where there is high risk of
exposure to oil fumes or mist.
► may damage product and cause is to fail.
►This
CAUTION
•• Make sure the product ventilation hole is not blocked. Install the
product in a suitably wide place. (more than 10 cm from the wall)
►If► you install the product too close to the wall, it may be deformed
or fire can break out due to internal heat.
•• Do not block the ventilation hole of the product by a tablecloth or
curtain.
► product can be deformed or fire can break out due to
►The
overheating inside the product.
•• Install the product on a flat and stable place that has no risk of
dropping the product.
►If► the product is dropped, you may be injured or the product may
be broken.
•• Install the product where no EMI occurs.
•• Keep the product away from direct sunlight.
► product can be damaged.
►The
•• If you install the product in a place that does not meet the
recommended conditions, this may cause serious damage to the
product's picture quality, life cycle and appearance. Please check with
LG or a qualified installer before installing. This caution applies to a
place where there is an abundance of fine dust or oil mist, chemical
substances are used, the temperature is very high or low, the
humidity is very high, or the product is likely to remain turned on for
a long period of time (airport and train station), failure to do so will
invalidate the warranty.
•• Do not install the product in an area with poor ventilation (e.g.on a
bookshelf, in a closet) or outside and avoid placing on cushions or
carpets.
•• In addition, do not install it where there are heating objects such as
lighting equipment.
Precautions to the AC adapter and electrical power
WARNING
•• If water or any foreign substance goes inside the product (monitor,
power cord, or AC adapter), disconnect the power cord immediately
and contact the service center.
►
this may cause a fire or electric shock due to damage to
►Otherwise,
the product.
•• Do not touch the power plug or AC adapter with wet hands. If the
pins of the plug are wet or dusty, wipe and dry them before use.
►
this may cause a fire or electric shock.
►Otherwise,
•• Make sure to completely insert the power cord into the AC adapter.
►If► loosely connected, the poor connection may cause a fire or
electric shock.
•• Be sure to use power cords and AC adapters provided or approved by
LG Electronics, Inc.
► use of non-approved products may cause a fire or electric
►The
shock.
3
ENG
ENGLISH
•• When unplugging the power cord, always pull it by the plug. Do not
bend the power cord with excessive force.
► power line can be damaged, which may cause electric shock or
►The
fire.
•• Be careful not to step or place heavy objects (electronic appliances,
clothing, etc.) on the power cord or AC adapter. Be careful not to
damage the power cord or AC adapter with sharp objects.
►
power cords may cause a fire or electric shock.
►Damaged
•• Never disassemble, repair or modify the power cord or AC adapter.
► may cause a fire or electric shock.
►This
•• Make sure to connect the power cable to the grounded current.
► may be electrocuted or injured.
►You
•• Use the rated voltage only.
► product can be damaged, or you may be electrocuted.
►The
•• In the presence of thunder and lightning, never touch the power cord
and signal cable because it can be very dangerous.
►It► can cause electric shock.
•• Do not connect several extension cords, electrical appliances or
electrical heaters to a single outlet. Use a power bar with a grounding
terminal designed for exclusive use with the computer.
►A► fire can break out due to overheating.
•• Do not touch the power plug with wet hands. Additionally, if the cord
pin is wet or covered with dust, dry the power plug completely or
wipe dust off.
► may be electrocuted due to excess moisture.
►You
•• If you don't intend to use the product for a long time, unplug the
power cable from the product.
►
dust can cause a fire, or insulation deterioration can cause
►Covering
electric leakage, electric shock or fire.
•• Fix the power cable completely.
►If► the power cable is not fixed completely, a fire can break out.
•• Do not insert a conductor (like a metal chopstick) into one end of the
power cable while the other end is connected to the input terminal
on the wall. Additionally, do not touch the power cable right after
plugging into the wall input terminal.
► may be electrocuted.
►You
•• The appliance coupler is used as the disconnect device.
•• Please make sure the device is installed near the wall outlet to which
it is connected and that the outlet is easily accessible.
•• As long as this unit is connected to the AC wall outlet, it is not
disconnected from the AC power source even if the unit is turned off.
4
CAUTION
•• Be sure to keep the outlet, AC adapter, and pins of the power plug
clean from dust and etc.
► may cause a fire.
►This
•• Do not unplug the power cord while the product is in use.
►
shock can damage the product.
►Electrical
•• Use only the power cord supplied with the unit. If you use another
power cord, make sure that it is certified by the applicable national
standards when not provided by the supplier. If the power cable is
faulty in any way, please contact the manufacturer or the nearest
authorized repair service provider for a replacement.
Precautions in moving the product
WARNING
•• Make sure to turn off the product.
► may be electrocuted or the product can be damaged.
►You
•• Make sure to remove all cables before moving the product.
► may be electrocuted or the product can be damaged.
►You
•• Make sure the panel faces forward and hold it with both hands to
move. If you drop the product, the damaged product can cause
electric shock or fire. Contact an authorized the service center for
repair.
•• Make sure the product is turned off, unplugged and all cables
have been removed. It may take 2 or more people to carry larger
apparatus. Do not press against or put stress on the front panel of
the apparatus.
CAUTION
•• Do not shock the product when moving it.
► may be electrocuted or the product can be damaged.
►You
•• Do not dispose the product-packing box. Use it when you move.
Precautions in using the product
WARNING
•• Do not disassemble, repair or modify the product at your own
discretion.
► or electric shock accident can occur.
►Fire
►
the service center for check, calibration or repair.
►Contact
•• When the display is to be left unattended for an extended period of
time, unplug it from the wall outlet.
•• Keep the product away from water.
► or electric shock accident can occur.
►Fire
•• Do not shock or scratch the front and sides of the screen with metallic
objects.
►
it may cause damage to the screen.
►Otherwise,
•• Avoid high temperatures and humidity.
CAUTION
Licenses
Supported licenses may differ by model. For more information about
licenses, visit www.lg.com.
ENGLISH
ENG
•• Do not put or store inflammable substances near the product.
►
is a danger of explosion or fire due to careless handling of
►There
the inflammable substances.
•• When cleaning the product, unplug the power cord and scrub gently
with a soft cloth to prevent scratching. Do not clean with a wet cloth
or spray water or other liquids directly onto the product. An electric
shock may occur. (Do not use chemicals such as benzene, paint
thinners or alcohol)
•• Take a rest from time to time to protect your vision.
•• Keep the product clean at all times.
•• Take a comfortable and natural position when working with a
product to relax the muscles.
•• Take a regular break when working with a product for a long time.
•• Do not press strongly upon the panel with a hand or sharp object
such as nail, pencil or pen, or make a scratch on it.
•• Keep the proper distance from the product.
► vision may be impaired if you look at the product too closely.
►Your
•• Set the appropriate resolution and clock by referring to the User’s
Guide.
► vision can be impaired.
►Your
•• Use authorized detergent only when cleaning the product. (Do not
use benzene, thinner or alcohol.)
►
can be deformed.
►Product
•• Do not expose to dripping or splashing and do not place objects filled
with liquids, such as vases, cups, etc. on or over the apparatus(e.g. on
shelves above the unit).
•• Batteries should not be exposed to excessive heat. For example, keep
away from direct sunlight, open fireplace and electric heaters.
•• Do NOT place non-rechargeable batteries in charging device.
•• Using headsets (earphones) for a long time or listening loudly can
cause damage to your hearing.
•• Spray water onto a soft cloth 2 to 4 times, and use it to clean the front
frame; wipe in one direction only. Too much moisture may cause
staining.
Manufactured under license from Dolby Laboratories. Dolby, Dolby
Vision, Dolby Audio, Dolby Atmos, and the double-D symbol are
trademarks of Dolby Laboratories.
The terms HDMI and HDMI High-Definition Multimedia Interface,
and the HDMI Logo are trademarks or registered trademarks of
HDMI Licensing Administrator, Inc. in the United States and other
countries.
This DivX Certified® device has passed rigorous testing to ensure it
plays DivX® video.
To play purchased DivX movies, first register your device at vod.
divx. com. Find your registration code in the DivX VOD section of
your device setup menu.
DivX Certified® to play DivX® video up to HD 1080p,including
premium content.
DivX®, DivX Certified® and associated logos are trademarks of DivX,
LLC and are used under license.
Covered by DivX Patents 7,295,673; 7,515,710; RE45,052; and
others available at [www.divx.com/patents]
Open Source Software Notice
Information
To obtain the source code under GPL, LGPL, MPL, and other open source
licenses, that is contained in this product, please visit
http://opensource.lge.com.
WATER
CHEMICALS
•• Do not use products using high voltage around the Monitor. (ex.
Electrical Swatter)
►
may have malfunction as its electrical shock.
►Monitor
Mounting on a wall
•• Do NOT install this product by yourself as you may injure yourself
or cause damage to product. Please contact Service personnel
authorised by Manufacturer.
In addition to the source code, all referred license terms, warranty
disclaimers and copyright notices are available for download.
LG Electronics will also provide open source code to you on CD-ROM
for a charge covering the cost of performing such distribution (such
as the cost of media, shipping, and handling) upon email request to
pensource@lge.com.
This offer is valid for a period of three years after our last shipment of
this product. This offer is valid to anyone in receipt of this information.
5
Preparing
Moving and lifting the monitor
NOTE
ENG
ENGLISH
•• Image shown may differ from your monitor.
•• The items supplied with your product may vary depending on the
model.
•• Without prior notice, all product information and specifications
contained in this manual are subject to change to improve the
performance of the product.
•• Your monitor’s OSD (On Screen Display) may differ slightly from that
shown in this manual.
•• The available menus and options may differ from the input source or
product model that you are using.
•• New features may be added to this monitor in the future.
•• For an optimal connection, HDMI cables and USB devices should have
bezels less than 10 mm thick and 18 mm width. Use an extension
cable that supports USB 2.0 if the USB cable or USB memory stick
does not fit into your monitor’s USB port.
A
A
*A 10 mm
*B 18 mm
•• Use a certified cable with the HDMI logo attached. If you do not use
a certified HDMI cable, the screen may not display or a connection
error may occur.
•• Recommended HDMI cable types
-- High-Speed HDMI®/™ cable
-- High-Speed HDMI®/™ cable with Ethernet
•• Always use genuine components to ensure safety and product
performance.
•• The product warranty will not cover damage or injury caused by the
use of unauthorized components.
6
•• It is advisable to place the monitor in the original box or packing
material before attempting to move it.
•• Before moving or lifting the monitor, disconnect the power cord and
all cables.
•• Hold the top and bottom of the monitor frame firmly. Do not hold the
panel itself.
B
B
CAUTION
When moving or lifting the monitor, follow these instructions to prevent
the monitor from being scratched or damaged and to ensure safe
transportation, regardless of its shape or size.
•• When holding the monitor, the screen should face away from you to
prevent it from being scratched.
•• When transporting the monitor, do not expose the monitor to jolts or
excessive vibration.
•• When moving the monitor, keep it upright and never turn the
monitor on its side or tilt it sideways.
CAUTION
•• Image shown may differ from your monitor.
•• Avoid touching the monitor screen as much as possible. Do not apply
pressure.
- This may result in damage to the screen or some of the pixels used
to create images.
•• Do not carry the monitor upside-down by holding the stand body
(or stand base) as this may cause it to fall off, resulting in damage
or injury.
•• When handling the monitor, be careful not to damage the protruding
joystick button.
Installing the monitor
Mounting on a table
•• Image shown may differ from your monitor.
CAUTION
1
Lift the monitor and place it on the table in an upright position.
- Place at least 10 cm away from the wall to ensure sufficient
ventilation.
100 mm
ENGLISH
ENG
•• When attaching the stand to the monitor set, place the screen facing
down on a cushioned table or flat surface to protect the screen from
scratches.
•• Applying excessive force when tightening screws may cause damage
to the monitor. Damage caused in this way will not be covered by the
product manufacturer’s warranty.
•• If you use the monitor panel without the stand base, its joystick
button may cause the monitor to become unstable and fall, resulting
in damage to the monitor or human injury. In addition, this may
cause the joystick button to malfunction.
•• Do not apply foreign substances (oils, lubricants, etc.) to the screw
parts when assembling the product. (Doing so may damage the
product.)
100 mm
100 mm
100 mm
NOTE
•• Remove the stand before installing the monitor on a wall mount by
performing the stand attachment in reverse.
•• To protect the screen from scratches, cover the surface with a soft
cloth.
Using the joystick button
You can simply operate the monitor functions, pressing or moving the
button.
2
Connect the AC-DC Adapter and Power Cord to a wall outlet.
CAUTION
•• Do not place the monitor near or on sources of heat, as this may result
in fire or other damage.
•• To avoid the risk of electric shock, disconnect the Power Cord before
moving or installing the monitor.
Joystick button
Basic functions
Power On / Off (Press)
7
Using the kensington security system
ENG
ENGLISH
(This is not available for all models.)
•• Image shown may differ from your monitor.
The Kensington security system connector is located at the rear of the
monitor. For more information of installation and using, refer to the
manual provided with the Kensington security system or visit http://
www.kensington.com.
Connect the Kensington security system cable between the monitor
and a table.
Separate purchase (Wall mounting
bracket)
Model
32MN49HM
Wall Mount
(A x B) (mm)
A
B
Standard screw
Number of screws
Wall mount bracket
(optional)
200 x 200
M6
4
LSW240B
CAUTION
NOTE
•• The Kensington security system is optional. You can obtain additional
accessories from most electronics stores.
Mounting on a wall
Install the monitor at least 10 cm away from the wall and leave about 10
cm of space at each side of the monitor to ensure sufficient ventilation.
Detailed installation instructions can be obtained from your local retail
store. Alternatively, please refer to the manual for how to install and set
up a tilting wall mounting bracket.
•• Disconnect the power cord first, and then move or install the monitor.
Otherwise electric shock may occur.
•• If you install the monitor on a ceiling or slanted wall, it may fall and
result in severe injury. Use an authorized LG wall mount and contact
the local dealer or qualified personnel.
•• Do not over tighten the screws as this may cause damage to the
monitor and void your warranty.
•• Use the screws and wall mounts that meet the VESA standard. Any
damages or injuries by misuse or using an improper accessory are not
covered by the manufacturer’s warranty.
•• Screw length from outer surface of back cover should be under 8 mm.
Wall mount plate
Back of the monitor
10 cm
10 cm
10 cm
To install the monitor to a wall, attach a wall mounting bracket
(optional) to the back of the monitor. Make sure that the wall mounting
bracket is securely fixed to the monitor and to the wall.
1 If you use screws longer than the standard length, it may damage
the inside of the product.
2 A non-VESA standard screw may damage the product and cause the
monitor to fall. LG Electronics is not liable for any accidents relating
to the use of non-standard screws.
8
Guide spacer
10 cm
Wall mount plate
Guide spacer fix
screw
NOTE
•• Use the screws that are listed on the VESA standard screw
specifications.
•• The wall mount kit includes an installation manual and necessary
parts.
•• The wall mount bracket is not provided. You can obtain additional
accessories from your local dealer.
•• The length of screws may differ depending on the wall mount. Make
sure to use the proper length.
•• For more information, refer to the manual supplied with the wall
mount.
Remote control
Your monitor supports the Plug and Play* feature and has the built-in
speakers with Virtual Surround that reproduces sound clearly with a
rich bass.
* Plug and Play: The function when a PC recognizes a connected device
that users connect to a PC and turn on, without device configuration or
user intervention.
The descriptions in this manual are based on the buttons on the remote
control. Please read this manual carefully and use the monitor correctly.
To replace batteries, open the battery cover, replace batteries (1.5 V AAA)
matching the
and ends to the label inside the compartment,
and close the battery cover. To remove the batteries, perform the
installation actions in reverse.
NOTE
•• For the best picture quality, connect the external device and the
monitor with the HDMI cable.
•• The monitor may flicker when turned on in an area where the
temperature is low. This is normal.
•• Sometimes red, green, or blue spots may appear on the screen. This
is normal.
•• Do not press the screen for a prolonged time. This may cause image
distortion.
•• Do not display a still image on the screen for a prolonged time. This
may cause image retention. Use a screensaver if possible.
ENGLISH
ENG
Connections (Notifications)
CAUTION
•• Do not mix old and new batteries, as this may damage the remote
control.
•• Some countries, some remote control buttons may not work.
This remote uses infrared light. When in use, it should be pointed in the
direction of the monitor’s remote sensor.
A
Other connections
Some separate cable is not provided. For the best picture and audio
quality, connect the external device and the monitor with the HDMI
cable.
•• USB port supports 0.5 A electric current. If you need more electric
current in case of HDD, use the separate power adaptor.
B
Connecting to a PC
NOTE
•• If you want to use HDMI-PC mode, you must set the Input Labelto
PC mode.
•• The OSD (On Screen Display) is displayed on the screen as shown
below.
-- When turning the product on in HDMI input.
-- When switching to HDMI input.
A
(Power) Turn the power on or off.
Resizes an image.
Changes the input source.
B
Adjusts the volume level.
Mutes all sounds.
Moves to the previous or next screen.
•• If you select "Yes" the size and image quality are optimised for your
PC.
•• If you select "No" the size and image quality are optimised for the AV
device (DVD player, set-top box).
•• If you select "Do not show message again" this message does
not appear until the monitor is reset. You can change the set value in
SETTINGS INPUT Input Label.
9
Setting the monitor
ENG
ENGLISH
C
Turning the monitor on for the first time
When you access the monitor for the first time, the initial setting screen
appears. Select a language and customize the basic settings.
1 Connect the power cord to a power outlet.
D
2 Standby Light is turned on. Set the joystick buttons on the monitor
or press the Power,
, INPUT
, Number buttons
on the remote control to turn the monitor on. The Standby Light is
turned off.
3 The initial setting screen appears if you access the monitor for the
first time.
4 Follow the on-screen instructions to customize your monitor
according to your preferences.
Language
C
Mode Setting
Changes the image mode.
Check the current input information.
Changes the sound mode.
Accesses the main menu.
Accesses the quick menus.
Navigation buttons (up/down/left/right) Scrolls through menus
or options.
Selects menus or options and confirms your input.
Returns to the previous screen.
Clears all on-screen displays and returns to monitor viewing.
D
,
,
,
These access special functions in some menus.
(Backlight) Adjusts the brightness of the screen by
controlling the screen backlight.
Selects Home Use for the home
environment.
Selects the Standby Light. If you select On,
the monitor turns on the standby light in the
front panel when the monitor is off.
NOTE
•• You can also access Factory Reset by accessing option in the main
menus.
•• If you do not operate the monitor within 40 seconds when the setting
menu screen appears, the setting menus will disappear.
•• To display images in the best quality for your home environment,
select Home Use (or Standard) mode.
•• Store Demo mode is suitable for the retail environment.
CAUTION
Accesses the AV devices connected with the HDMI cable
through HDMI-CEC. Opens the SIMPLINK menu.
Control buttons (
) Controls the MY MEDIA menus, or
the SIMPLINK compatible devices (USB, SIMPLINK).
10
Standby Light
Selects a language for the display.
•• Disconnect the power cord from the power outlet when you do not
use the monitor for a long period of time.
Settings
signal in relation to the input signal.
•• Depending on input signal or other picture settings, the range of
detailed items for adjustment may differ.
To use Energy Saving feature
PICTURE
To set additional picture options
Energy Saving
Reduces power consumption by adjusting screen brightness.
•• Off : Turns off the Energy Saving mode.
•• Minimum / Medium / Maximum : Applies the pre-set Energy
Saving mode.
•• Screen Off : Screen is turned off and only sound is played. Press any
button except Power button on the remote control to turn the screen
back on.
To select Picture Mode
SETTINGS
PICTURE
Picture Mode
Select the picture mode optimized for the viewing environment or the
programme.
•• Vivid : Heightens contrast, brightness and sharpness to display vivid
images.
•• Standard : Displays images in standard levels of contrast, brightness
and sharpness.
•• Eco : The Energy Saver feature changes settings on the monitor to
reduce power consumption.
•• Cinema / Game : Displays the optimum picture for movie, game.
•• Sport : Optimizes the video image for high and dynamic actions by
emphasizing primary colours such as white, grass, or sky blue.
••
Expert 1, 2 : Menu for adjusting picture quality that allows
experts and amateurs to enjoy the best monitor viewing. This is
the adjustment menu provided for ISF-certified picture tuning
professionals. (ISF logo can only be used on ISF-certified monitors.)
ISFccc: Imaging Science Foundation Certified Calibration Control
•• Depending on input signal, available range of picture modes may
differ.
••
Expert mode is for picture tuning professionals to control and
fine-tune using a specific image. For normal images, the effects may
not be dramatic.
•• The ISF function is only available on some models.
To set advanced control
SETTINGS PICTURE
Expert Control
Picture Mode
Advanced Control /
Calibrates the screen for each picture mode; or adjusts picture settings
for a special screen. First select a Picture Mode of your choice.
•• Dynamic Contrast : Adjusts the contrast to the optimal level
according to the brightness of the image.
•• Dynamic Colour : Adjusts colours to make the image appear in
more natural colours.
•• Colour Gamut : Selects the range of colours that can be expressed.
•• Skin Colour : Sets Skin colour spectrum separately to implement the
skin colour as defined by the user.
•• Sky Colour : Sky colour is set separately.
•• Grass Colour : Natural colour spectrum (meadows, hills, etc.) can be
separately set.
•• Gamma : Sets the gradation curve according to the output of picture
SETTINGS
PICTURE
Picture Mode
Picture Option
Adjusts detailed setting for images.
•• Noise Reduction : Eliminates noise in the picture.
•• MPEG Noise Reduction : Eliminates noise generated while creating
digital picture signals.
•• Black Level : Adjusts the brightness and contrast of the screen to
suit the black level of the input picture by using the blackness (black
level) of the screen.
•• Real Cinema : Optimizes the screen for movie viewing.
•• Motion Eye Care : [Depending on model] Automatically adjusts
brightness and reduces image blur based on image data to reduce
eyestrain.
•• Depending on input signal or other picture settings, the range of
detailed items for adjustment may differ.
To set Picture Reset
SETTINGS
PICTURE
Picture Mode
Picture Reset
Resets picture settings that the user customizes.
Each picture mode is reset. Select the desired picture mode to reset.
To use Sound Mode
SETTINGS
AUDIO
Sound Mode
Adjusts monitor audio to an optimal level based on a selected sound
mode.
•• Standard : Suitable for all types of video.
•• News / Music / Cinema / Sport / Game : Sets audio optimized
for a specific genre.
To synchronize audio and video
SETTINGS
AUDIO
AV Sync. Adjust
[Depending on model]
Synchronizes video and audio directly when they do not match.
•• If you set AV Sync. Adjust to ON, you can adjust the sound output
(Speakers) to the screen image.
11
ENGLISH
ENG
SETTINGS
ENG
ENGLISH
To use SIMPLINK
Using a USB storage device - warning
SIMPLINK is a feature that enables you to control and manage various
multimedia devices conveniently via the SIMPLINK menu.
•• If the USB storage device has a built-in auto recognition program or
uses its own driver, it may not work.
•• Some USB storage devices may not work or may work incorrectly.
•• Use only USB storage devices formatted with the Windows FAT32 or
NTFS File System.
•• For external USB HDDs, it is recommended that you use devices with a
rated voltage of less than 5 V and a rated current of less than 500 mA.
•• It is recommended that you use USB memory sticks of 32 GB or less
and USB HDDs of 1 TB or less.
•• If a USB HDD with power-saving function does not work properly,
turn the power off and on. For more information, refer to the user
manual of the USB HDD.
•• Data in the USB storage device can be damaged, so be sure to back
up important files to other devices. Data maintenance is the user’s
responsibility and the manufacturer is not responsible for data loss.
1 Connect the monitor’s
terminal and the SIMPLINK device’s
HDMI output terminal using an HDMI cable.
2 Select INPUT
Simplink. SIMPLINK menu window appears.
3 In SIMPLINK Setting window, set SIMPLINK function to ON.
4 In SIMPLINK menu window, selects the device you want to control.
•• This function is only compatible with devices with the SIMPLINK logo.
•• To use the SIMPLINK function, you need to use a high-speed HDMI®
cable (with CEC (Consumer Electronics Control) feature added). Highspeed HDMI® cables have the No. 13 pin connected for information
exchange between devices.
•• If you switch to another input, the SIMPLINK device will stop.
•• If a third-party device with the HDMI-CEC function is also used, the
SIMPLINK device may not work normally.
•• If you select or play media from a the device with a home theatre
function, the HT Speaker is automatically connected.
To set password
SETTINGS
LOCK
Set Password
Sets or changes the monitor password.
The initial password is set to ‘0000’.
To return Initial Setting
SETTINGS
OPTION
Factory Reset
All stored information is deleted and monitor settings are reset. The
monitor turns itself off and back on, and all settings are reset.
•• When Lock System is in place, a pop-up window appears and asks
for password.
•• Do not turn off the power during initialization.
To remove the USB device
Q.MENU
USB Device
Select a USB storage device that you want to remove. When you see a
message that the USB device has been removed, separate the device
from the monitor.
•• Once a USB device has been selected for removal, it can no longer be
read. Remove the USB storage device and then re-connect it.
12
My Media supporting file
•• Maximum data transfer rate : 20 Mbps (Mega bit per second)
•• External supported subtitle formats : *.srt (SubRip), *.smi (SAMI),
*.sub (SubViewer, MicroDVD, DVDsubtitleSystem, SubIdx(Vobsub)),
*.ass/*.ssa (SubStation Alpha), *.txt (TMplayer), *.psb (PowerDivX)
•• Internal supported subtitle formats: XSUB (Supports internal subtitles
generated from DivX6)
Supported Video Formats
•• Maximum: 1920 x 1080 @ 30p (only Motion JPEG 640 x 480 @ 30p)
•• .asf, .wmv
[Video] MPEG-2, MPEG-4 Part2, XViD, H.264/AVC, VC1(WMV3, WVC1),
MP43
[Audio] WMA Standard, WMA9(Pro), MP3, AAC, AC3, 3D WMV Single
Stream
•• .divx, .avi
[Video] MPEG-2, MPEG-4 Part2, DivX3.11, DivX4, DivX5, DivX6, XViD,
H.264/AVC
[Audio] HE-AAC, LPCM, ADPCM, MPEG- 1 Layer I, MPEG-1 Layer II,
Dolby Digital, MPEG-1 Layer III (MP3)
•• .ts, .trp, .tp, .mts, .m2ts
[Video] H.264/AVC, MPEG-2, AVS, VC1
[Audio] MPEG-1 Layer I, MPEG-1 Layer II, MPEG-1 Layer III (MP3),
Dolby Digital, Dolby Digital Plus, AAC, HE-AAC
•• .vob
[Video] MPEG-1, MPEG-2
[Audio] Dolby Digital, MPEG-1 Layer I, MPEG- 1 Layer II, DVD-LPCM
•• .mp4, .m4v, .mov
[Video] MPEG-2, MPEG-4 Part2, DivX3.11, DivX4, DivX5, DivX6, XViD,
H.264/AVC
[Audio] AAC, MPEG-1 Layer III (MP3)
•• .mkv
[Video] MPEG-2, MPEG-4 Part2, XViD, H.264/AVC
[Audio] HE-AAC, Dolby Digital, MPEG-1 Layer III (MP3), LPCM
Supported Audio Formats
Supported Photo Formats
•• Category : 2D (jpeg, jpg, jpe)
[Available file type]
SOF0: Baseline,
SOF1 : Extend Sequential,
SOF2 : Progressive
[Photo size] Minimum : 64 x 64,
Maximum : Normal Type: 15360 (W) x 8640(H),
Progressive Type : 1920 (W) x 1440 (H)
•• Category : BMP
[Photo size] Minimum : 64 x 64, Maximum : 9600 x 6400
•• Category : PNG
[Available file type] Interlace, Non-Interlace
[Photo size] Minimum : 64 x 64, Maximum : Interlace : 1200 x 800,
Non-Interlace : 9600 x 6400
•• BMP and PNG format files may be slower to display than JPEG.
ENGLISH
ENG
•• motion JPEG
[Video] MJPEG
[Audio] LPCM, ADPCM
•• .mpg, .mpeg, .mpe
[Video] MPEG-1, MPEG-2
[Audio] MPEG-1 Layer I, MPEG-1 Layer II, Dolby Digital, LPCM
•• .dat
[Video] MPEG-1, MPEG-2
[Audio] MP2
•• .flv
[Video] Sorenson H.263, H.264/AVC
[Audio] MP3, AAC, HE-AAC
•• .3gp, .3gp2
[Video] H.264/AVC, MPEG-4 Part2
[Audio] AAC, AMR(NB/WB)
•• File type : mp3
[Bit rate] 32 Kbps - 320 Kbps
[Sample freq.] 16 kHz - 48 kHz
[Support] MPEG1, MPEG2, Layer2, Layer3
•• File Type : AAC
[Bit rate] Free Format
[Sample freq.] 8 kHz ~ 48 kHz
[Support] ADIF, ADTS
•• File Type : M4A
[Bit rate] Free Format
[Sample freq.] 8 kHz ~ 48 kHz
[Support] MPEG-4
•• File Type : WMA
[Bit rate] 128 Kbps ~ 320 Kbps
[Sample freq.] 8 kHz ~ 48 kHz
[Support] WMA7, WMA8, WMA9 Standard
•• File Type : WMA 10 Pro
[Bit rate] ~ 768 Kbps
[Channel / Sample freq.]
M0 : up to 2 Channel @ 48 kHz
(Except LBR mode),
M1 : up to 5.1 Channel @ 48 kHz,
M2 : up to 5.1 Channel @ 96 kHz
[Support] WMA 10 Pro
•• File Type : OGG
[Bit rate] Free Format
[Sample freq.] 8 kHz ~ 48 kHz
[Support] OGG Vorbis
13
Maintenance
ENG
ENGLISH
Cleaning your monitor
Clean your monitor regularly to keep the best performance and to
extend the product lifespan.
•• Make sure to turn the power off and disconnect the power cord and
all other cables first.
•• When the monitor is left unattended and unused for a long time,
disconnect the power cord from the wall outlet to prevent possible
damage from lightning or power surges.
Screen, frame, cabinet, and stand
To remove dust or light dirt, wipe the surface with a dry, clean, and soft
cloth.
To remove major dirt, wipe the surface with a soft cloth dampened in
clean water or a diluted mild detergent. Then wipe immediately with
a dry cloth.
•• Avoid touching the screen at all times, as this may result in damage
to the screen.
•• Do not push, rub, or hit the surface with your fingernail or a sharp
object, as this may result in scratches on the screen and image
distortions.
•• Do not use any chemicals as this may damage the product.
•• Do not spray liquid onto the surface. If water enters the monitor, it
may result in fire, electric shock, or malfunction.
Power cord
Remove the accumulated dust or dirt on the power cord regularly.
Preventing “Image burn” or “Burn-in” on
your monitor screen
•• If a fixed image displays on the monitor screen for a long period of
time, it will be imprinted and become a permanent disfigurement
on the screen. This is “image burn” or “burn-in” and not covered by
the warranty.
•• If the aspect ratio of the monitor is set to 4:3 for a long period of time,
image burn may occur on the letterboxed area of the screen.
NOTE
•• Avoid keeping a fixed image on the set’s screen for prolonged periods
of time. The fixed image may become permanently imprinted on the
screen. Use a screen saver when possible.
•• There may be interference relating to resolution, vertical pattern,
contrast or brightness in PC mode. Change the PC mode to another
resolution or change the refresh rate to another rate or adjust the
brightness and contrast on the menu until the picture is clear. If the
refresh rate of the PC graphic card can not be changed, change the PC
graphic card or consult the manufacturer of the PC graphic card.
•• If using a sound card, adjust PC sound as required.
•• DOS mode may not work depending on the video card if you use an
HDMI to DVI cable.
14
Troubleshooting
Cannot control the monitor with the remote control.
•• Check the remote control sensor on the product and try again.
•• Check if there is any obstacle between the product and the remote
control.
•• Check if the batteries are still working and properly installed
( to , to ).
No image display and no sound is produced.
•• Check if the product is turned on.
•• Check if the power cord is connected to a wall outlet.
•• Check if there is a problem in the wall outlet by connecting other
products.
The monitor turns off suddenly.
•• Check the power control settings. The power supply may be
interrupted.
•• Check if the Automatic Standby(Depending on model) / Sleep
Timer / Off Time is activated in the TIME settings.
•• If there is no signal while the monitor is on, the monitor will turn off
automatically after 15 minutes of inactivity.
When connecting to the PC (HDMI), ‘No signal’ or ‘Invalid
Format’ is displayed.
•• Turn the monitor off/on using the remote control.
•• Reconnect the HDMI cable.
•• Restart the PC with the monitor on.
If monitor is turned off automatically.
•• If On Time is enabled, the monitor will be turned on at the specified
time. If you do not operate the monitor for two hours, the monitor
will be turned off automatically.
•• To disable this function, use your remote control to go to SETTINGS
TIME Auto Off (On Time) Off.
Specifications
Product specifications may be changed without prior notice due to upgrade of product functions.
Environment condition
0 °C to 40 °C
Operating Humidity
Less than 80 %
Storage Temperature
-20 °C to 60 °C
Storage Humidity
Less than 85 %
ENGLISH
ENG
Operating Temperature
Models
Dimensions (Width x Height x Depth) (mm)
Weight (kg)
32MN49HM
With Stand
739 x 472 x 168
Without Stand
739 x 441 x 84
With Stand
4.9
Without Stand
4.85
Power consumption
(Outgoing condition)
Power requirement
AC/DC Adapter
28 W
19 V
1.8 A
Manufacturer : APD
Model : DA-48F19
Manufacturer : Lienchang
Model : LCAP35
Manufacturer : Lite-On
Model : PA-1650-43
In : AC 100 - 240 V ~ 50/60 Hz
Out : DC 19 V
2.53 A
15
HDMI (PC) supported mode
Resolution
Component supported mode
ENG
ENGLISH
Horizontal Frequency
(kHz)
Vertical Frequency
(Hz)
31.468
31.469
37.500
37.879
46.875
48.363
60.023
49.702
47.717
70.08
59.94
75.00
60.317
75.00
60.004
75.029
59.81
59.79
720 x 400
640 x 480
800 x 600
1024 x 768
1280 x 800
1366 x 768
Resolution
720 x 480
720 x 576
720 x 480
1280 x 720
•• The optimal display resolution is 1366 x 768 @ 60 Hz.
•• The optimal timing in each mode is vertical frequency 60 Hz.
HDMI supported mode
Resolution
720 x 480
720 x 576
1280 x 720
1920 x 1080
16
Horizontal
Frequency (kHz)
31.469
31.5000
31.250
37.500
44.960
45.000
33.720
33.750
28.125
27.000
33.750
56.250
67.430
67.500
1920 x 1080
Vertical
Frequency (Hz)
59.940
60.000
50.000
50.000
59.940
60.000
59.940
60.000
50.000
24.000
30.000
50.000
59.940
60.000
Horizontal
Frequency (kHz)
15.730
15.750
15.625
31.250
31.470
31.500
44.960
45.000
37.500
33.720
33.750
28.125
56.250
67.432
67.500
Vertical
Frequency (Hz)
59.940
60.000
50.000
50.000
59.940
60.000
59.940
60.000
50.000
59.940
60.000
50.000
50.000
59.940
60.000
Component port connecting information
Y
Video output ports
on DVD player
Y
PB
B-Y
PR
R-Y
Y
Cb
Cr
Y
Pb
Pr
Service
ENGLISH
ENG
Unplug the monitor from the wall outlet and refer servicing to qualified
service personnel when :
•• The power cord or plug is damaged or frayed.
•• Liquid has been spilled into the monitor.
•• The monitor has been exposed to rain or water.
•• The monitor does not operate normally following the operating
instructions. Adjust only those controls that are covered in the
operating instructions. An improper adjustment of other controls may
result in damage and often requires extensive work by a qualified
technician to restore the monitor to normal operation.
•• The monitor has been dropped or the cabinet has been damaged.
•• The monitor exhibits a distinct change in performance.
•• Snapping or popping from the monitor is continuous or frequent
while the monitor is operating. It is normal for some monitors to
make occasional sounds when being turned on or off, or when
changing video modes.
Do not attempt to service the monitor yourself, as opening or removing
covers may expose you to dangerous voltage or other hazards. Refer all
servicing to qualified service personnel.
17
Record the model number and serial number of the
monitor.
Refer to the label on the back cover and quote this
information to your dealer when requiring any service.
MODEL
SERIAL
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising