LG | 43TA3E-B | User manual | LG 43TA3E-B Panduan User

LG 43TA3E-B Panduan User
USER GUIDE
LG Digital
Signage
(MONITOR SIGNAGE)
Please read this manual carefully before operation and retain it for future
reference.
webOS 3.2
www.lg.com
2
ENGLISH
CONTENTS
SETTINGS.......................................4
-- Home........................................................................................4
-- Display..................................................................................25
[Picture Mode]
[Global Buttons]
[Aspect Ratio]
[Dashboard]
[Rotation]
[Content Manager]
-- Ez Setting..............................................................................5
[Expert Controls]
-- Sound....................................................................................31
[Video Wall]
[Sound Mode]
[On/Off Scheduler]
[Sound Out]
[SI Server Setting]
[Audio Out]
[Server Setting]
[Volume Increase Amount]
[Fail Over]
[AV Sync. Adjust]
[Status Mailing]
[Play via URL]
[Setting Data Cloning]
[Sync Mode]
[Signage 365 Care]
[Multi Screen]
-- General.................................................................................11
[Language]
[System Information]
[Set ID]
[Time & Date]
[Power]
[Network]
[Safety Mode]
[Expert Controls]
[Digital Audio Input]
-- Admin....................................................................................34
[Lock Mode]
[Change PIN Code]
[Enterprise Settings]
[Reset to Initial Settings]
[Factory Reset]
3
ENGLISH
CONTENT MANAGER................. 36
-- Web Login...........................................................................36
-- Content Manager...........................................................36
[Player]
[Scheduler]
[Template]
-- Group Manager 2.0.......................................................43
-- ScreenShare.......................................................................46
MANAGEMENT TOOLS............... 47
-- Control Manager.............................................................47
-- Picture ID.............................................................................48
TOUCH......................................... 49
-- Touch Assistive Menu...................................................49
-- IDB (Interactive Digital Board)................................50
IR CODE....................................... 51
CONTROLLING MULTIPLE
PRODUCTS................................... 53
-- Connecting cables..........................................................53
-- Communication Parameter.......................................54
-- Command Reference List...........................................55
-- Transmission/Reception Protocol..........................59
To obtain the source code under GPL, LGPL, MPL,
and other open source licenses, that is contained
in this product, please visit
http://opensource.lge.com.
In addition to the source code, all referred license
terms, warranty disclaimers and copyright notices
are available for download.
LG Electronics will also provide open source code
to you on CD-ROM for a charge covering the
cost of performing such distribution (such as the
cost of media, shipping, and handling) upon email
request to opensource@lge.com.
This offer is valid for a period of three years after
our last shipment of this product. This offer is
valid to anyone in receipt of this information.
4
NOTE
ENGLISH
•• Software-related content may be changed without prior notice due to upgrades of the product functions.
•• Some features described in the User Manual may not be supported in certain models and countries.
•• SNMP 2.0 is supported.
SETTINGS
Home
[Global Buttons]
••
••
••
[MOBILE URL]: Provides information necessary to access the monitor set through an external device's browser.
With this feature, you can view QR code and URL information. In addition, by accessing the URL, you can also run
Content Manager and Group Manager 2.0, and Control Manager. (This featured is optimized for Google Chrome.)
[Input]: Navigate to the external input selection screen
[Settings]: Navigate to the Settings screen
[Dashboard]
•• This feature displays key information about your Signage monitor in the center of the home screen. In the Dashboard,
you can manually change settings by selecting the corresponding items.
NOTE
•• If the dashboard is locked, the focus does not move.
[Content Manager]
•• [Player]: Play a variety of content including images, videos, and SuperSign content.
•• [Scheduler]: Manage schedules for content that will be played at different times.
•• [Template]: You can create your own content using templates and media files.
•• [Group Manager 2.0]: Distribute content schedules and setting data to the connected device.
5
[Video Wall]
[Ez Setting] [Video Wall]
Set Video Wall options to create a wide visual canvas.
•• [Tile Mode]: Turn [Tile Mode] on or off.
•• [Tile Mode Setting]: Display a single integrated screen on multiple Signage monitors.
•• [Natural Mode]: Display the image excluding the area that overlaps with the monitor's bezel so that the image
displayed has a more natural feel to it.
•• [Frame Control]: Adjust the sets that run [Scan Inversion] and frame deviation.
-- When running [Scan Inversion], please run [Frame Control] for the sets that do not run [Scan Inversion].
•• [Scan Inversion]: Reduce screen deviation between adjoining video walls by changing screen scanning method.
•• [White Balance]: Configure white balance settings (White Pattern, R/G/B-Gain, and Luminance).
•• [RESET]: Reset to initial settings.
NOTE
•• When Tile Mode is enabled, automatically set [Frame Control] for odd numbered rows and [Scan Inversion] for even
numbered rows.
[On/Off Scheduler]
[Ez Setting] [On/Off Scheduler]
Set a schedule to use your signage by time and day of the week.
•• [On/Off Time Setting]: Set on/off times for each day of the week.
•• [Holiday Setting]: Set holidays by date and by day of the week.
[SI Server Setting]
[Ez Setting] [SI Server Setting]
Set up to connect your signage to an external SI server. Set up a server environment for SI app installation.
[Ez Setting] [SI Server Setting] [Developer Mode & Beanviser]
This feature provides great convenience to the app developers.
Set up to install and activate the Developer mode and BEANVISER app.
NOTE
•• To use these features, an account (ID/Password) for webOS Signage developer website (http://webossignage.
developer.lge.com/) is required.
ENGLISH
Ez Setting
6
[Server Setting]
ENGLISH
[Ez Setting] [Server Setting]
Set up to connect your signage to a SuperSign server.
•• CMS servers
•• Control servers
[Fail Over]
[Ez Setting] [Fail Over]
This feature enables automatically switching to other input sources in order of priority if the primary signal is
interrupted. It also enables the automatic playback of the content stored on your device.
•• [On/Off]: Turns [Fail Over] on or off.
•• [Input Priority]: Set the priority of input sources for fail over.
•• [Backup via Storage]: Automatically play the content stored on the device when there is no input signal. Set to [On]
to activate Auto, Manual, and [SuperSign Contents].
-- Auto: When the automatic input switches due to taking screenshots of an image or video that is playing at regular
intervals, this feature will play back the file. (OLED model is not supported.)
--> [Capture time Interval]: The time interval can be set to 30 min, 1 hour, 2 hours and 3 hours.
-- Manual: When the automatic input switches due to the image and video file being uploaded, the feature will play
back the file.
--> [Backup media select]: Using the settings button, you can upload a single file in the internal / external memory.
--> [Preview]: You can preview the uploaded file.
-- [SuperSign Contents]: When the automatic input switches, this feature will play the file(s) distributed in SuperSign
CMS.
•• [RESET]: Reset to initial settings.
[Status Mailing]
[Ez Setting] [Status Mailing]
This feature configures the system so that the status of the device is assessed and then notified to the administrator
by e-mail.
•• [On/Off]: Turns [Status Mailing] on or off.
•• [Mailing Option], [SCHEDULE]: Sets the email sending interval.
•• [User E-mail Address]: Set the user email address of the sender.
•• [Sending Server(SMTP)]: Set the address of the SMTP server.
•• [ID]: Enter the account ID of the sender.
•• [Password]: Enter the password for the sender's account.
•• Recipient E-mail Address: Set the email address of the recipient.
•• Message Delivery: Immediately assess the status of the device and deliver the information to the specified email
address.
•• [RESET]: Reset to initial settings.
7
NOTE
ENGLISH
•• If the status regarding any of the following items changes or becomes abnormal, a status message can be sent.
-- 1. Temp. Sensor: If the set reaches a dangerous temperature, its current temperature is recorded, and an email
containing such information is sent.
-- 2. Temp. Sensor Validation: An email is sent if there is no temperature sensor connected, if the communication
status of the temperature sensor is unknown, or if the information provided by the chip provider is abnormal.
-- 3. LAN Status, Wi-Fi Status: An email is sent if there is a change in the network’s connection status. The maximum
number of network status changes that can be saved is limited to 50. The saved value is reset once the power turns
off.
-- 4. Screen Fault Detection: An email is sent if an abnormal value is picked up by the RGB sensor while Screen Fault
Detection is turned on in the Settings.
-- 5. No Signal Check: Checks whether there is a signal. If there are no signals for more than 10 seconds, an email is
sent.
-- 6. Schedule Play Status: An email is sent if content cannot be played between the scheduled start time and end
time in either Content Management Schedule status or SuperSign Content status. However, this does not apply
when terminated using the remote control.
-- 7. Fail Over Status: An email is sent if input switching occurred due to an error. (Excludes input switching initiated
by the user (RC, RS232C, SuperSign))
•• Only SMTP ports 25, 465, and 587 are supported.
•• The occurrence of internal input switches, excluding external input switches (RC, RS232C, SuperSign), are considered
as Fail Over Status.
•• One email containing the “Failover status : Failover” message is sent when switching to Fail Over Status, and the
following status emails sent regularly or upon status changes contain the message “Failover status : None”.
8
[Play via URL]
ENGLISH
[Ez Setting] [Play via URL]
Play content you want to play automatically through the built-in web browser.
•• [URL Loader]: Turns [Play via URL] on or off.
•• [Set URL]: Enter the URL address to display automatically.
•• [Preview]: Preview your desired website by accessing the specified URL.
•• [SAVE]: Save the specified URL.
•• [Reboot to Apply]: Restarts the monitor set after saving the specified URL.
•• [RESET]: Reset to initial settings.
NOTE
•• This feature does not apply when [Screen Rotation] is enabled, and using this feature disables [Preview].
•• [Time & Date] is not set to [Set Automatically], website navigation may be difficult.
-[General] [Time & Date] Check [Set Automatically]
[Setting Data Cloning]
[Ez Setting] [Setting Data Cloning]
This feature is used to copy and import the settings of the device to other devices.
•• [Export Setting Data]: Export the settings of the device to another device.
•• [Import Setting Data]: Import the settings of another device into the device.
[Sync Mode]
[Ez Setting] [Sync Mode]
Sync up time and content among multiple signages.
•• [RS-232C Sync]: Sync up multiple signages connected by RS-232C.
•• [Network Sync]: Sync up multiple signages connected to the same network.
9
[Signage 365 Care]
•• [Install]: Installs the Signage 365 Care solution.
1) [ENTER ACCOUNT NUMBER]: Enters the 6-digit account number to install the Signage 365 Care solution.
-- Account Number: The number assigned when the Signage 365 Care solution is registered. When the account
number is entered, the account name corresponding to the number is obtained.
2) [CONFIRM ACCOUNT NUMBER]: Displays the account number and the account name corresponding to the
account number and validates the account number.
-- If the account number is registered, the account name corresponding to the account number is displayed, and you
can continue to install the Signage 365 Care solution.
-- If the account number is not registered, “Unknown” is displayed as the account name, and you cannot continue to
install the solution.
•• [Enable]/[Disable]: Sets whether to Enable/Disable the Signage 365 Care solution.
•• [Account]: Displays user’s currently connected account number and name.
•• [Version]: Displays the version of the Signage 365 Care solution.
•• [Check for Update]: Checks for available updates in the server.
•• [Update]: Updates the Signage 365 Care solution to the latest version.
•• [Server Status]: Displays the status of connection between the set and server.
-- [Connected]: Displayed when the set and server are connected.
-- [Not Connected]: Displayed when the set and server are disconnected.
-- [Waiting for Approval]: Displayed when the server is waiting for approval.
-- [Rejected]: Displayed when the server rejected the connection.
•• [Reset]: Deletes the installed Signage 365 Care solution.
ENGLISH
[Ez Setting] [Signage 365 Care]
You can install the Signage 365 Care (fault diagnosis) solution for fault diagnosis and prediction service.
10
[Multi Screen]
ENGLISH
[Ez Setting] [Multi Screen]
This feature allows you to view multiple external inputs and videos on a single screen.
NOTE
•• After entering multi-screen mode, the screen may flicker and the picture may appear abnormal on certain devices
while the optimal resolution is selected automatically. If this happens, please restart the monitor.
•• In multi-screen mode, the DP daisy chain feature is not supported.
[Selecting Screen Layout]
When you enter multi-screen mode without having set any screen layout, the screen layout selection menu appears.
When the screen layout selection menu is not displayed on the screen, go to the screen layout menu bar by pressing
the up arrow key on your remote control and select your desired screen layout. If you want to close the screen layout
menu, press the back key.
[Closing Screen Layout Menu]
From the screen layout menu, press the up arrow key on the remote control to go to the screen layout menu bar and
select it or press the back key to close the screen layout menu.
[Changing Screen Input]
Press the
button on the top right of each split screen to select the desired input.
NOTE
•• Inputs which have already been selected for other split screens cannot be selected again. To select them, press the
RESET button to reset the inputs for all screens first.
•• PIP mode works only when External Input Rotation is set to Off and Screen Rotation is set to Off.
[Playing Videos on Split Screens]
Press the
button on the upper right of each split screen, select Video File, and then select a storage device to view
the list of videos in the selected device. Next, select your desired video from the list to play it.
NOTE
•• Videos created with HEVC, MPEG-2, H.264, or VP9 codecs can be played on split screens. When using PIP mode, the
following combinations cannot be used.
Main
Sub
HEVC
HEVC
H.264
HEVC
MPEG-2
HEVC
VP9
VP9
11
ENGLISH
General
[Language]
[General] [Language]
You can select the menu language to be displayed on the screen.
•• [Menu Language]: Sets the language of your Signage monitor.
•• [Keyboard Language]: Sets the language of the keyboard displayed on the screen.
[System Information]
[General] [System Information]
This feature displays information such as the device name, software version, and storage space.
[Set ID]
[General]
[Set ID]
•• [Set ID] (1~1000): Assigns a unique Set ID number to each product when several products are connected via RS232C. Assign numbers ranging from 1 to 1000 and exit the option. You can control each product separately by using
the Set ID you assigned to each product.
•• [Auto Set ID]: Automatically assigns a unique Set ID number to each product when several products are connected
for display.
•• [Reset ID]: Reset the Set ID of the product to 1.
[Time & Date]
[General] [Time & Date]
This feature enables you to view and change the time and date on the device.
•• [Set Automatically]: Set [Time] and [Date].
•• [Daylight Saving Time]: Set the start and end times for Daylight Saving Time. The DST start/end times function only
when you set them more than one day apart from each other.
•• [NTP Server Setting]: Allows you to set other NTP servers other than the basic NTP server.
•• [Time Zone]: Configure the continent, country/region and city.
12
[Power]
ENGLISH
[General]
Power-related feature settings
[Power]
[No Signal Power Off (15 Min)]
Set whether to use the 15 Min Auto Off feature.
•• You can set this option to [On] or [Off].
•• If you set this feature to [On], the product turns off when it has remained in No Signal status for 15 minutes.
•• If you set this feature to [Off], the 15 Min Force Off feature is disabled.
•• It is recommended that you set this feature to [Off] if you intend to use the product for long periods of time as the
feature turns the power of the product off.
[No IR Power Off (4hour)]
Set whether to use 4 Hours Off feature.
•• You can set this option to [On] or [Off].
•• If you set this feature to [On] the product turns off if there is no input from the remote control for 4 hours.
•• If you set this feature to [Off], the 4 Hours Off feature is disabled.
•• It is recommended that you set this feature to [Off] if you intend to use the product for long periods of time as the
feature turns the power of the product off.
[DPM]
Set the Display Power Management (DPM) mode.
•• If this feature is not set to [Off], the monitor will enter DPM mode when there is no input signal.
•• If you set this feature to [Off], [DPM] is disabled.
[DPM Wake Up Control]
Turns on the set according to the digital signal processing of the connected DVI-D/HDMI port.
•• [Clock], the set only checks for digital clock signals and turns on once it finds the clock signal.
•• [Clock+DATA], the set turns on if the digital clock and data signals are both input.
13
[PM Mode]
NOTE
•• In order for the screen to switch from [Screen Off] to On status, there must be input from the remote control's
Power or Input button, or the monitor's On button.
[Power On Delay (0~250)]
•• This feature prevents overload by implementing a power-on delay when multiple monitor sets turn on.
•• You can set the delay interval in the range of 0 to 250 seconds.
[Power On Status]
•• Select the operating status of the monitor when the main power has turned on.
•• You can choose from among [PWR (Power On)], [STD (Standby)], and [LST (Last Status)].
•• [PWR (Power On)] keep the monitor powered on when the main power has turned on.
•• [STD (Standby)] switch the monitor to Standby status when the main power has turned on.
•• [LST (Last Status)] switches the monitor back to its previous status.
[Wake On LAN]
•• Set whether to use [Wake On LAN].
•• You can set the feature to On or Off for each wired/wireless network.
•• [Wired]: When set to [On], the [Wake On LAN] feature is enabled, letting you turn the product on remotely through
a wired network.
•• [WiFi]: When set to [On], the [Wake On LAN] feature is enabled, letting you turn the product on remotely through a
wireless network.
ENGLISH
•• [Power Off(Default)]: Sets the normal DC off mode.
•• [Sustain Aspect Ratio]: Identical to normal DC off mode except that the Switching IC remains on. On some models,
this applies only to a specific input mode (DisplayPort) and has the same effect as [Screen Off Always] in other input
modes.
•• [Screen Off]: Switches to [Screen Off] status when entering DPM, Auto Power Off (15 mins, 4 hours), or Abnormal
Shut Down mode.
•• [Screen Off Always]: Switches to [Screen Off] status when entering DPM, Auto Power Off (15 mins, 4 hours), Off
Time Scheduling, or Abnormal Shut Down mode, or when there is input from the remote control’s Power button or
the monitor’s Off button.
•• [Screen Off & Backlight On]: Partially turns on the backlight to keep the display at a proper temperature when in
Screen Off status.
14
[Power Indicator]
ENGLISH
•• This function enables you to change the [Power Indicator] settings.
•• Setting to [On] will turn on [Power Indicator].
•• Setting to [Off] will turn off [Power Indicator].
•• Regardless of [On] or [Off] settings in [Power Indicator], [Power Indicator] will be turned on for approximately 15
seconds.
[Power On/Off History]
Display the device's power on/off history.
[Network]
[General]
[Network]
[Wired Connection (Ethernet)]
•• [Wired Connection]: Connects the monitor to a local area network (LAN) via the LAN port and configures wired
network settings. Only wired network connections are supported. After setting up a physical connection, the display
will automatically connect without any adjustments on most networks. A small number of networks may require the
display settings to be adjusted. For detailed information, contact your Internet provider or consult your router manual.
[Wi-Fi Connection]
If you have set your monitor up for a wireless network, you can view and connect to available wireless Internet
networks.
•• [Add a Hidden Wireless Network]: You can add a wireless network by manually typing in its name.
•• [Connect via WPS PBC]: Press the button on the wireless router that supports PBC to easily connect to the router.
•• [Connect via WPS PIN]: Enter the PIN number in the web page of the PIN-supporting wireless router to connect to
the router in a simple manner.
•• [Advanced Wi-Fi Settings]: When there is no available wireless network displayed on the screen, you can connect to
the wireless network by entering the network information directly.
NOTE
•• On models that support Wi-Fi dongles, the Wireless Network Connection menu is enabled only when a Wi-Fi dongle
is connected.
•• When connected to a network that supports IPv6, you can select IPv4 / IPv6 in the wired / wireless network
connection. But, IPv6 connection only supports automatic connection.
15
[LAN Daisy Chain]
[SoftAP]
If you set up a SoftAP, you can connect many devices via a Wi-Fi connection without a wireless router and use wireless
Internet.
•• You must have an Internet connection.
•• The SoftAP and ScreenShare features cannot be used at the same time.
•• On models that support Wi-Fi dongles, the SoftAP menu is enabled only when a Wi-Fi dongle is connected to the
product.
•• SoftAp Access Information
-- SSID: A unique identifier necessary to make a wireless Internet connection
-- Security key: The security key you enter to connect to the desired wireless network
-- Number of connected devices: Shows the number of devices currently connected to your Signage device via a Wi-Fi
connection. Up to 10 devices are supported.
[UPnP]
Open and block UDP port 1900, which is used for UPnP.
•• The default setting is [On]. Setting this feature to [Off] blocks UDP port 1900, making the UPnP function
unavailable.
•• If you set this feature to [Off], Sync Mode's "Network" option will be deactivated. When the value for Sync Mode is
"Network," the value switches to [Off], deactivating the "Network" option.
•• If you change the UPnP value, the change will not be applied before a reboot.
•• If you set UPnP to [Off], you cannot use Group Manager 2.0 properly.
[Ping Test]
Check your network connection status via Ping Test.
[Port Control]
Unused ports can be blocked for network security.
NOTE
•• A reboot is recommended for the settings to be applied properly.
ENGLISH
•• LAN Daisy Chain forms a daisy chain of LAN ports so that even if you connect only one monitor set to a network, the
other sets in the daisy chain are connected to the network.
•• However, the first monitor set in the daisy chain must be connected to the network through a port that is not used
for the daisy chain connection.
16
Tips for Network Settings
ENGLISH
•• Use a standard LAN cable (Cat5 or higher with a RJ45 connector) with this display.
•• Many network connection problems during set up can often be fixed by re-setting the router or modem. After
connecting the display to the home network, quickly power off and/or disconnect the power cable of the home
network router or cable modem, Then power on and/or connect the power cable again.
•• Depending on the Internet service provider (ISP), the number of devices that can receive INTERNET service may be
limited by the applicable terms of service. For details, contact your ISP.
•• LG is not responsible for any malfunction of the display or Internet connection failures due to communication errors/
malfunctions associated with your Internet connection or other connected equipment.
•• LG is not responsible for problems within your INTERNET connection.
•• You may experience undesired results if the network connection speed does not meet the requirements of the
content being accessed.
•• Some INTERNET connection operations may not be possible due to certain restrictions set by the Internet service
provider (ISP) supplying your Internet connection.
•• Any fees charged by an ISP including, without limitation, connection charges are your responsibility.
NOTE
•• If you want to access the Internet directly on your display, the INTERNET connection should always be on.
•• If you cannot access the Internet, check the network conditions from a PC on your network.
•• When you use Network Setting, check the LAN cable or check if DHCP in the router is turned on.
•• If you do not complete the network settings, the network may not function correctly.
CAUTION
•• Do not connect a modular phone cable to the LAN port.
•• Since there are various connection methods, please follow the specifications of your telecommunication carrier or
INTERNET service provider.
•• Network setting menu will not be available until the display connected to physical network.
17
Tips for When Configuring Wireless Network Settings
ENGLISH
•• The wireless network may be affected by interference from a device that uses 2.4 GHz frequency, such as a wireless
telephone, Bluetooth device or microwave. Interference may also be caused by a device that uses 5 GHz frequency
such as Wi-Fi devices.
•• The wireless network service may run slowly depending on the surrounding wireless environment.
•• Some devices may have a network traffic jam if any local home networks are turned on.
•• To connect to a wireless router, a router that supports wireless connection is necessary; the wireless connection
function of the corresponding router must also be activated. Ask the router manufacturer whether the router
supports wireless connection.
•• To connect to a wireless router, verify the SSID and security settings of the wireless router. Please refer to the user
guide of the corresponding router regarding SSID and security settings of the wireless router.
•• The monitor may not work properly if network devices (wire/wireless router or hub, etc.) are incorrectly set up. Be
sure to install the devices correctly by referring to their user guides before configuring the network connection.
•• The connection method may vary according to the manufacturer of the wireless router.
18
[Safety Mode]
ENGLISH
[General] [Safety Mode]
Set to this function for safe performance.
[ISM Method]
If a still image is displayed on the screen for an extended period of time, image sticking can occur. The ISM method is a
feature that prevents image sticking.
[Mode]
•• Selects the desired [ISM Method] mode.
•• [Normal]: Disables the ISM method.
•• [Inversion]: Inverts screen colors to remove image sticking. (This option is disabled when the current input source is
No Signal.)
•• [Orbiter]: Moves the screen display by 4 pixels in a certain order to prevent image sticking. (This option is disabled
when the input source is No Signal.) (OLED model is not supported.)
•• [White Wash]: Displays a white pattern to remove image sticking.
•• [Color Wash]: Alternately displays a white pattern and a color pattern to remove image sticking.
•• [Washing Bar]: Displays a bar on the screen to make the image move smoothly. You can download your desired image
and display it on the bar.
•• [User Image]: Displays your desired images using USB. (OLED model is not supported.)
•• [User Video]: Plays your desired video.
[Repeat]
•• [Off, just 1 time]: If you select the desired mode and press DONE, ISM operates immediately.
•• [On]: If the screen remains still for a specified wait time, ISM operates for the specified duration time.
•• [On, with moving detection]: Only applies to Orbiter mode. If the screen remains still for the specified Wait time, ISM
operates for the specified Duration time.
•• [On, without moving detection]: Only applies to Orbiter mode. ISM immediately starts operating and continues to
operate as soon as the DONE button is clicked.
•• [Schedule]: Enables ISM feature in accordance with the set date, start time, and end time.
[Wait]
•• You can set the time between 1–24 hours.
•• This option is available only when you have set [Repeat] to [On].
•• The ISM feature starts when the image freezes for a specified period of time.
19
[Duration]
[Select Day]
•• You can set the date.
•• This option is available only when [Repeat] is set to [Schedule].
[Start Time]
•• Set the Start time.
•• This option is available only when [Repeat] is set to [Schedule].
•• You cannot set the same time for Start time and End time.
[End Time]
•• Set the End time.
•• This option is available only when [Repeat] is set to [Schedule].
•• You cannot set the same time for Start time and End time.
[Action Cycle]
•• You can select from among 1–10 mins/20 mins/30 mins/60 mins/90 mins/120 mins/180 mins/240 mins.
•• This option is available only when you have selected [Inversion] or [Orbiter].
•• [Orbiter]: Moves the position of the screen at specified intervals.
•• [Inversion]: Inverts the screen color at specified intervals.
ENGLISH
•• You can select from among 1–10 mins/20 mins/30 mins/60 mins/90 mins/120 mins/180 mins/240 mins.
•• This option is available only when you have set [Repeat] to [On].
•• ISM operates for the specified time.
20
[Bar Image]
ENGLISH
•• [Off]: Displays a bar with a fixed resolution of 300 x 1080, then moves the bar.
•• [On]: Displays and moves an image downloaded by the user. The image is displayed with a fixed height of 1080 and
the same width as downloaded. However, if the width of the image is below 300, it will have a fixed value of 300.
•• This option is available only when you have selected [Washing Bar].
•• If you have downloaded only one image, the bar is moved and the image is displayed alone.
•• If you have downloaded multiple images, up to four images are displayed in sequence per cycle.
[Bar Color]
•• You can choose from six colors: red, green, blue, white, black, and gray.
•• This feature is only applicable when [Bar Image] is set to [Off].
•• This option is available only when you have selected [Washing Bar].
[Transparency]
•• [Off]: Displays the bar opaquely.
•• [On]: Displays the bar translucently. (Transparency: 50 %)
•• This option is available only when you have selected [Washing Bar].
[Direction]
•• [Left To Right]: The bar is moved from left to right.
•• [Right To Left]: The bar is moved from right to left.
•• This option is available only when you have selected [Washing Bar].
21
[Bar Image Download]
[User Image Download]
•• To download an image, the image file must be located under the folder titled “ISM” on your USB drive.
•• Make sure to delete the old images stored in the internal memory before downloading a new image file.
•• Supported image file types: “BMP”, “JPG”, “JPEG”, “PNG”
•• You can download up to four images. (Resolution: 1920 x 1080 or lower)
•• If there are no images, or if the existing images have been deleted, the default image is used. (The default image is a
white background image.)
•• This option is available only when you have selected [User Image].
[User Video Download]
•• To download a video, the video file must be located under the folder titled “ISM” on your USB drive.
•• Make sure to delete the old contents stored in the internal memory before downloading a new video file.
•• Supported video file types: “MP4”, “AVI”, “FLV”, “MKV”, “MPEG”, “TS”
•• You can download up to one video.
•• If there are no videos, or if the existing videos have been deleted, the default video is used. (The default video is a
white background image.)
•• This option is available only when you have selected [User Video].
* How to reset or delete downloaded Bar image / User image / User video
•• Reset using [SETTINGS] > [Admin] > [Factory Reset]
•• Open the Player app > Click “Delete” button at the top right of the screen > Delete downloaded image / video
ENGLISH
•• To download an image, the image file must be located under the folder titled “ISM” on your USB drive.
•• Make sure to delete the old images stored in the internal memory before downloading a new image file.
•• Supported image file types: “BMP”, “JPG”, “JPEG”, “PNG”
•• You can download up to four images. (Resolution: 1920 x 1080 or lower)
•• If there are no images, or if the existing images have been deleted, the default image is used. (The default image is an
image of a white bar.)
•• This option is available only when [Bar Image] is [On].
22
[Screen Fault Detection]
ENGLISH
•• The screen fault detection feature determines whether there is an abnormality at the end of screen; R, G, and B
OSDs are created in the upper left-hand corner of the panel at intervals of about one second, and then a pixel sensor
checks the area.
•• Setting this feature to [On] enables the screen fault detection feature.
•• Setting this feature to [Off] disables the screen fault detection feature.
[Expert Controls]
[General]
[Advanced Setting]
[Beacon]
•• This option enables BLE Beacon, one of Bluetooth 4.0's features.
•• Beacon Mode (On/Off Toggle): enables the Beacon feature.
•• The LG Beacon/iBeacon/Eddystone Type Beacon features are supported.
•• LG Beacon/iBeacon
-- Beacon UUID (hex): Set the UUID.
1. Field1: 4byte hex value (8 digits)
2. Field2: 2byte hex value (4 digits)
3. Field3: 2byte hex value (4 digits)
4. Field4: 2byte hex value (4 digits)
5. Field5: 6byte hex value (12 digits)
-- Major (0–65535): Sets the Major value.
-- Minor (0–65535): Sets the Minor value.
•• Eddystone
-- Frame: Set UUID or URL.
1. Beacon UUID (hex): Set the UUID.
(1) Field1: 10byte hex value (20 digits)
(2) Field2: 6byte hex value (12 digits)
2. Setting the URL method
-- URL Prefix: Sets the prefix of the URL.
-- URL Suffix: Set the suffix of the URL.
-- URL: Enter the part of the URL that excludes the prefix and suffix.
-- URL string length is limited to 17 characters.
•• [OK]: The button used to confirm and apply the settings that you have entered.
NOTE
•• Some models do not support background screening services in iOS.
•• A reboot is recommended for the settings to be applied properly.
•• The UUID value is hexadecimal and the exact number of digits must be entered.
23
[OPS Control]
[Background Image]
This feature enables you to set the default background image.
•• [Booting Logo Image]: Change the logo image that appears when the device boots up. If you set this option to Off, no
logo image appears when the device boots up. Download or initialize an image file on the storage device.
•• [No Signal Image]: Changes the image that appears when there is no signal. If you set this option to Off, no image
appears when there is no signal. Download or initialize an image file on the storage device.
[Input Manager]
You can set the PC or DTV label for each external input.
ENGLISH
•• [OPS Power Control]: This feature enables you to control the power of the OPS as you turn on/off the display.
-- [Disable]: Disable [OPS Power Control].
-- [Sync (On)]: Synchronize the monitor's power status only when the monitor is on.
-- [Sync (On/Off)]: Synchronize the monitor's power status with the OPS.
•• [Control Interface Selection]: This feature enables you to configure communication with the OPS connected to your
monitor.
-- [Display]: Enable communication with external serial ports.
-- [OPS]: Enable communication with the OPS connected to your monitor.
24
[SIMPLINK Setup]
ENGLISH
•• When the [SIMPLINK Setup] is set to [On], you can use the SIMPLINK provided by LG Signage.
•• [Device ID]: Set the ID of the device connected via CEC wiring. You can choose a value between [All] and [E].
•• [StandBy]: Sets the scenarios for sending and receiving the OpStandBy (0x0c) command. Detailed scenarios are as
follows:
Transmission
Reception
O
All
O
Send Only
O
X
Receive Only
X
O
[Crestron]
•• This function enables synchronization with applications provided by Crestron.
•• Server: This menu sets the server's IP address for the network connection with the server (equipment provided by
Crestron).
•• Port (1024~65535): This menu sets the port for the network connection with the server. The default port number is
41794.
•• IP ID (3-254): This menu sets a unique ID for synchronizing with the application.
25
ENGLISH
Display
[Picture Mode]
[Display]
[Picture Mode]
[Mode]
This feature enables you to choose the optimal picture mode for your installation environment.
•• [Mall/QSR], [Transportation], [Education], [Gov./Corp.], [Game], and [Photo]: Display the picture optimally for your
installation environment.
•• [Normal]: Display the picture at normal contrast, brightness, and sharpness.
•• [APS]: Adjust the screen brightness to reduce power consumption.
•• [Expert], [Calibration]: Allow an expert, or anyone who loves picture quality, to manually tune to the best picture
quality.
NOTE
•• The kinds of [Picture Mode] you can select may vary depending on the input signal.
•• [Expert] is an option that allows a picture quality expert to fine-tune the picture quality using a specific image. Thus,
it may not be effective for a normal picture.
26
[Customize]
ENGLISH
•• [Backlight]: Adjust the brightness of the screen by adjusting the brightness of the backlight. The closer the value is to
100, the brighter the screen is.
•• [OLED Light]: Adjusts the screen brightness by varying the brightness of the OLED panel.
•• [Contrast]: Adjust the difference between the light and dark areas of the picture. The closer the value is to 100, the
greater the difference is.
•• [Brightness]: Adjust the overall brightness of the screen. The closer the value is to 100, the brighter the screen is.
•• [Sharpness]: Adjust the sharpness of the edges of objects. The closer the value is to 50, the clearer and the sharper
the edge becomes.
•• [H Sharpness]: Adjust the sharpness of the contrast edges on the screen from a horizontal point of view.
•• [V Sharpness]: Adjust the sharpness of the contrast edges on the screen from a vertical point of view.
•• [Color]: Soften or deepen the tints on the screen. The closer the value is to 100, the deeper the colors become.
•• [Tint]: Adjust the balance between red and green levels displayed on the screen. The closer to Red 50, the redder the
color will be. The closer to Green 50, the greener the color will be.
•• [Color Temperature]: The higher you set the color temperature, the cooler the colors on the screen will feel. The lower
you set the color temperature, the warmer the colors on the screen will feel.
•• [Expert Controls] Customize the advanced options.
-- [Dynamic Contrast]: Optimize the difference between the light and dark parts of the screen according to the
brightness of the image.
-- [Super Resolution]: Sharpen the areas of the screen that are blurry or barely distinguishable.
-- [Color Gamut]: Select the range of colors available.
-- [Dynamic Color]: Adjust the tint and saturation of the image for a more vivid and lively display.
-- [Edge Enhancer]: Provide much sharper and clearer edges to the picture.
-- [Color Filter]: Accurately adjust color and tint by filtering a specific color area of RGB space.
-- [Preferred Color]: Adjust the skin tint, grass tint, and sky tint to your preference.
-- [Gamma]: Adjust gamma settings to compensate for the brightness of the input signal.
-- [White Balance]: Adjust the overall color fidelity of the screen to your liking. In Expert mode, you can fine-tune the
picture using the Method/Pattern options.
-- [White Balance Setting Mode]: You can select the white balance setting mode.
-- [Color Management System]: Experts use the color management system when they adjust the colors by using the
test pattern. The color management system allows you to make an adjustment by selecting from among 6 different
color spaces (Red/Yellow/Blue/Cyan/Magenta/Green) without affecting other colors. In a normal picture, you may
not notice the color changes you have made.
27
ENGLISH
•• [Picture Option]: Customize the picture options.
-- [Noise Reduction]: Remove randomly popping dots to make the picture look clearer.
-- [MPEG Noise Reduction]: Reduce the noise generated in the process of creating a digital video signal.
-- [Black Level]: Adjust the brightness and contrast of the screen by adjusting the black level of the screen.
-- [Real Cinema]: Optimize the video image for a cinematic look.
-- [Motion Eye Care]: Reduce eye fatigue by adjusting brightness levels and lessening blurriness based on the
displayed image.
-- [LED Local Dimming]: Make the light areas of the screen lighter and the dark areas darker for maximum contrast.
Setting this feature to Off may increase the monitor's power consumption.
-- [TruMotion]: Reduce image shaking and image sticking that can occur with moving images. (Some models do not
support playback of the content.)
•• [Apply to all inputs]: Save the current customized setting values to currently selected picture mode for all inputs.
•• [Reset]: Reset the picture settings. Because the picture settings are reset according to the monitor's picture mode,
please select the picture mode before resetting the picture settings.
28
[Aspect Ratio]
ENGLISH
[Display] [Aspect Ratio]
This feature enables you to change the picture size to view the picture at its optimal resolution.
•• [Full Wide]: Stretch the picture to fill the screen.
•• [Original]: Display the picture at its original resolution.
[Rotation]
[Display]
[Rotation]
[Screen Rotation]
•• This feature rotates the screen clockwise.
•• You can set this feature to Off/90/180/270.
•• When set to off, this feature is deactivated.
•• It is recommended that you use content designed to be used in Portrait mode.
[External Input Rotation]
•• This feature rotates the screen clockwise.
•• You can set this feature to Off/90/180/270.
•• When this feature is set to On (90 or 270 degrees), as for ARC, the picture is resized to be [Full Wide].
•• If [External Input Rotation] is enabled during WiDi operation, the position of the mouse cursor may not be displayed
accurately.
•• Please note that the degradation of picture quality that occurs when you have enabled [External Input Rotation]
during the use of external input has nothing to do with the product itself.
•• When External Input Rotation is set to On, Multi Screen's PIP mode is disabled.
•• If External Input Rotation is enabled on models that support touch, touch may not work properly.
29
[Expert Controls]
[Advanced Setting]
[UHD Deep Color]
If you connect an HDMI, DP, or OPS device to one of the Deep Color adjustable ports, you can select between UHD
Deep Color On (6G) or Off (3G) in the UHD Deep Color settings menu.
If a compatibility issue occurs with a graphics card when the Deep Color option is set to On at 3840 x 2160 @ 60 Hz,
set the Deep Color option back to Off.
•• HDMI, DP, and OPS specifications may vary depending on the input port. Check the specifications of each device
before connecting.
•• HDMI input port 2 is best suited for high definition videos that are 4K@60 Hz (4:4:4, 4:2:2). However, video or audio
may not be supported depending on the specifications of the external device. If this is the case, please connect the
device to a different HDMI port.
[OLED Panel Settings]
•• [Clear Panel Noise]: Correct issues that may arise when the screen is turned on for a long period of time.
[Energy Saving]
•• [Smart Energy Saving]: Automatically adjust the brightness of the screen according to the brightness of the picture
to save energy.
-- [On]: Enable the Smart Energy Saving feature.
-- [Off]: Disable the Smart Energy Saving feature.
•• [Brightness Control]: Adjust the brightness of the screen to save energy.
-- [Auto]: Automatically adjust the brightness of the screen according to ambient light.
-- [Off]: Disable energy saving.
-- [Minimum]/[Medium]/[Maximum]: Use energy saving according to the energy saving level set for the monitor.
•• [Brightness Scheduling]: Adjust the backlight at specified times.
-- You can set this feature to [On/Off].
-- Add schedule by setting the schedule time and backlight / OLED light value.
-- If the current time has not been set, [Brightness Scheduling] is disabled.
-- You can add up to six schedules, and they are sorted in ascending order by time.
-- You can edit a schedule by selecting it from the list and pressing the [OK] button.
•• [Screen Off]: Turn off the screen, meaning the TV only produces sound. You can turn on the screen again by pressing
any button on the remote control except the power button.
ENGLISH
[Display]
30
[Adjust (RGB-PC)]
ENGLISH
This feature enables you to configure the PC display options in RGB mode.
•• [Set Automatically]: Automatically adjust the screen position, time, and phase. The image displayed on the screen can
be unstable for a few seconds in the process of the configuration.
•• [Resolution]: Choose between 1024 x 768, 1280 x 768 and 1360 x 768 resolution.
•• [Position]/[Size]/[Phase]: Adjust the options when the picture is not clear, especially when characters are shaky, after
the auto configuration.
•• [Reset]: Resets the options to default.
•• [Intelligent Auto]: Decides to run Auto Configuration on resolutions recognized for the first time by the RGB input.
[HDMI IT Contents]
Set the HDMI IT Contents function.
•• [Off]: Disable the HDMI IT Contents function.
•• [On]: Enable the HDMI IT Contents function.
This feature automatically changes the monitor's picture mode based on HDMI Contents information when an HDMI
signal is entered.
Even if the monitor's picture mode has been changed by the HDMI IT Contents feature, you can change the picture
mode again manually.
As this has a higher priority than the picture mode set by the user, the existing picture mode may be changed when
the HDMI signal changes.
31
ENGLISH
Sound
[Sound Mode]
[Sound]
[Sound Mode]
[Sound Mode]
The best sound quality will be selected automatically depending on the video type currently being watched.
•• [Standard]: This sound mode works well for content of all types.
•• [Cinema]: Optimize sound for watching movies.
•• [Clear Voice III]: Enhance voices so they can be heard more clearly.
•• [Sports]: Optimize sound for watching sports.
•• [Music]: Optimize sound for listening to music.
•• [Game]: Optimize sound for playing video games.
[Balance]
•• [Balance]: Adjust the output volume for the left speaker and the right speaker.
[Equalizer]
•• [Equalizer]: Manually adjust sound by using the equalizer.
[Reset]
•• [Reset]: Resets sound settings.
32
[Sound Out]
ENGLISH
[Sound]
[Sound Out]
•• [Internal Speaker]/[External Speaker]: You can output audio either through your Signage monitor's internal speaker
or through an external speaker connected to it.
•• [SIMPLINK External Speaker]: This function connects Home Theater device by SIMPLINK. When it is set to Home
Theater device input, it outputs voice through the connected device. This option is activated when SIMPLINK has been
set to On.
•• [LG Sound Sync]/[Bluetooth]: Enables you to connect Bluetooth audio devices or Bluetooth headsets wirelessly to
your monitor so that you can enjoy richer audio conveniently.
NOTE
•• Some recently connected devices may automatically attempt to reconnect to the Signage monitor when it is turned
on.
•• It is recommended that you set LG audio devices that support LG Sound Sync to LG TV mode or LG Sound Sync mode
before connecting.
•• Press Device Selection to view the devices that are or that can be connected and connect other devices.
•• You can use the signage remote control to adjust the volume of the connected device.
•• If the audio device fails to connect, check that it is switched on and available for connection.
•• Depending on the type of the Bluetooth device, the device may not connect correctly or an abnormal behavior may
occur such as unsynchronized video and audio.
•• Sound may stutter or sound quality may be reduced if:
-- The Bluetooth device is too far from the Signage monitor.
-- There is an obstructing object between the Bluetooth device and the Signage monitor.
-- The Bluetooth device is used together with radio equipment such as a microwave oven or wireless LAN.
33
[Audio Out]
[Audio Out]
[Volume Increase Amount]
[Sound] [Volume Increase Amount]
This feature enables you to adjust the amount of volume that increases/decreases when you press the up/down volume
key on your remote control. The higher the value you set, the faster the volume increases. Choose from among [Low],
[Medium], and [High] to adjust the volume range.
[AV Sync. Adjust]
[Sound] [AV Sync. Adjust]
This feature adjusts audio timing to synchronize video and audio.
•• [External Speaker] (-5~15): Adjust the sync between video and audio coming from external speakers, such as those
connected to the digital audio output port, LG audio equipment, or headphones. Moving closer to – speeds up the
audio output, while moving closer to + slows down the audio output, compared to the default value.
•• [Internal Speaker] (-5~15): Adjust the sync of sound from the internal speakers. Moving closer to – speeds up the
audio output, while moving closer to + slows down the audio output, compared to the default value.
•• [Bypass]: Output the broadcast signals or the sound from external devices without any audio delay. Audio may be
outputted earlier than video due to the processing time for video that is inputted into the monitor.
[Digital Audio Input]
[Sound] [Digital Audio Input]
This feature enables you to choose an input source for audio output.
•• [Digital]: Output the audio contained in the digital signal inputted from the connected digital input source (HDMI,
DISPLAYPORT, or OPS).
•• [Analog]: Output audio from the digital input source (HDMI, DISPLAYPORT, or OPS) connected to the monitor
through the Audio In port.
ENGLISH
[Sound]
•• [Off]: Disables the use of Audio Out. (No audio outputted.)
•• [Variable]: You can specify an output range for the external audio device connected to the monitor and adjust the
volume within the range. You can change the volume of an external audio device within the range of 0 to 100 (the
same as the Signage speaker volume). However, there may be a difference in the actual volume level outputted.
•• [Fixed]: Set a fixed audio output level for the external audio device.
-- If there is no external input, no external audio is outputted.
-- The variable audio output level 100 is the same as the fixed audio output level.
34
ENGLISH
Admin
[Lock Mode]
[Admin]
[Lock Mode]
[Home Dashboard Lock]
This feature enables you to restrict changes made to dashboard lock settings on the Home screen.
[USB Lock]
This feature enables you to configure the USB lock feature so that settings or content cannot be changed.
[OSD Lock]
This feature enables you to configure the OSD lock feature so that settings or content cannot be changed.
•• Press and hold the Settings key for at least 10 seconds and enter password to access the settings menu in OSD Lock.
[IR Operation Lock]
•• If you set this feature to [Off (Normal)], you can use your remote control.
•• If you set this feature to [On (Power Key Only)], you can only use the power key.
•• If you set this feature to [On (Block All)], you cannot use your remote control. (However, Power On feature is
available.)
[Local Key Operation Lock]
This feature enables you to configure the Local Key Operation Lock feature so that settings or content cannot be
changed.
•• If you set this feature to [Off (Normal)], you can use the local keys on the monitor.
•• If you set this feature to [On (Power Key Only)], you can only use the power key. (When you use a joystick, press and
hold a local key to turn on/off the monitor.)
•• If you set this feature to [On (Block All)], you cannot use the local keys. (However, Power On feature is available.)
[Wi-Fi Lock]
This feature enables you to turn the Wi-Fi feature on or off.
[Screen Share Lock]
This feature enables you to turn the Screen Share feature on or off.
If the Screen Share Lock value is changed, the function is not applied without a reboot.
35
[Change PIN Code]
1 Enter your current password.
2 Enter a new 4-digit password.
3 Enter the same password again in the Confirm Password field for confirmation.
[Enterprise Settings]
•• Enter your company account code to apply the corresponding enterprise settings.
•• When your code has been entered, the monitor set gets reset, thereby applying the corresponding enterprise
settings.
•• This feature does not get activated if a code has already been entered.
[Reset to Initial Settings]
Resets all items except for the Q Start items (functions related to the language, screen direction, external input, time,
and power) and other items to their initial settings.
[Factory Reset]
This feature resets the items applicable for Reset to Initial Settings, Date, Time, Language, Network IP, and the Input
Label Internal Storage files.
However, Calibration mode's RGB gain is an exception.
NOTE
•• It keeps the existing settings because the Off / On button in the User menu only affects the active / inactive status
of the submenu.
ENGLISH
This feature enables you to set the password you use to enter the Installation menu.
36
ENGLISH
CONTENT MANAGER
Web Login
•• Different features are supported depending on the product.
This Signage product comes with a feature that enables you to access it on your PC or mobile device.
-- Content Manager, Group Manager 2.0, Control Manager, Log Out, Change Password menus are provided.
•• URL: https://set ip:443
•• (The default password: 000000)
CAUTION
•• Supported resolutions (this program is optimized for the following resolutions):
-- PC: 1920 x 1080, 1280 x 1024
-- Mobile: 360 x 640 (1440 x 2560, 1080 x 1920), DPR
•• Supported browsers (this program is optimized for the following browsers):
-- Chrome 56 or later (recommended)
Content Manager
[Player]
[Player]
The Content Manager app's player feature enables you to play and manage video content, image content, template
content, SuperSign content, and playlist content in an integrated way. (The OLED models do not support the playback
and management of image content and template content.)
[Continuous Play]
1 Select your desired type of content from the tab on the left and then select your desired content.
2 Click [Play] in the upper right-hand corner of the screen and enjoy the content you have selected.
[Export]
1 Select your desired type of content from the tab on the left and click [Export] in the upper right-hand corner of the
screen.
2 Select the content you wish to export.
3 Click [Copy]/[Move] in the upper right-hand corner of the screen and select the device to which you wish to export
the content. (If a content file stored on the target device has been selected, the processing of the content file is
skipped.)
4 You can see that the content has been moved/copied to the device.
37
[Delete]
screen.
2 Select the content you wish to delete.
3 Click [Delete] in the upper right-hand corner of the screen.
4 You can see that the content has been deleted.
[Filter / Sort]
1 Click [Filter / Sort] in the upper right-hand corner of the screen.
2 1) Choose your desired sort criterion to sort content files either by file name or in the order they have been played
(the most recently played file shown at the top of the list).
2) It is possible to only view the content stored on your desired device by filtering content files by device.
3) It is possible to only view the content of your desired type by filtering content files by content type.
[Create Playlist]
When creating a playlist, you cannot include characters that cannot be used in file names on Windows — such as \, /,:,
*,?, ", <,>, and | — in the names of the files in the playlist. In addition, if the playlist contains content files whose names
include such characters, you cannot move or copy the playlist.
1 Select [Playlist] from the tab on the left and click [Create Playlist] in the upper right-hand of the screen.
2 Select the content you wish to add to the playlist and click “Next” in the upper right-hand of the screen.
3 Set a play time for each piece of content (applicable only for photo and template content), as well as other items
such as Conversion Effect, Ratio, and Auto Playback, and then click “Done” button in the upper right-hand corner of
the screen.
4 You can see a new [Playlist] has been created.
ENGLISH
1 Select your desired type of content from the tab on the left and click [Delete] in the upper right-hand corner of the
38
[Scheduler]
ENGLISH
[Scheduler]
The Content Manager app's scheduler feature enables certain content to be played at a scheduled time through a
playlist or external input.
[Creating a Schedule]
1 Click [New Schedule] in the upper right-hand corner of the screen.
2 Choose between [Playlist] and [Input Source].
3 1) If you have selected [Playlist], select the playlist you wish to schedule the playback of.
2) If you have selected [Input Source], select the external input source you wish to schedule the playback of.
4 Enter schedule information and create a new schedule. (When creating a schedule, you cannot include characters
that cannot be used in file names on Windows — such as \, /,:, *,?, ", <,>, and | — in the name of the schedule file.
In addition, if the playlist linked to the schedule contains content files whose names include such characters, you
cannot move or copy the playlist.)
5 Watch the playlist or external input you selected play back at its scheduled time.
[Importing a Schedule]
1
2
3
4
5
Click [Import] in the upper right-hand corner of the screen.
Select the external storage device from which you wish to import a schedule.
Select the schedule you wish to import to your monitor. (You can only choose a single schedule.)
Click [Select] in the upper right-hand corner of the screen.
Check that the schedule has been imported to the monitor's internal storage memory.
[Exporting a Schedule]
1
2
3
4
5
Click [Export] in the upper right-hand corner of the screen.
Select the external storage device to which you wish to export a schedule.
Select the schedule you wish to export from your monitor. (You can choose multiple schedules.)
Click [Select] in the upper right-hand corner of the screen.
Check that the schedule has been exported to the external storage device you selected.
39
[Deleting a Schedule]
Click [Delete] in the upper right-hand corner of the screen.
Select the schedules you wish to delete.
Click [Delete].
Check that the schedules have been deleted.
[Calendar View]
1 When you have registered schedules, click [Calendar View].
2 You can see that the schedules registered are displayed in the form of a timetable.
NOTE
•• If the schedule creation time overlaps, the previously created schedule is deleted.
•• When a schedule that has not been set repeatedly is completed, the schedule is automatically deleted.
•• Schedule does not work while Scheduling list app is running.
[Template]
[Template]
The Content Manager app's editor feature enables you to add your desired templates.
1 Select the template of your desired format. (You can choose between Landscape mode and Portrait mode.)
2 Modify the template's text.
2-1. A
pply your desired font style (text size, text thickness, underline, and italic).
3 Modify the media file.
4 Save the template by clicking [Save] in the top right-hand corner of the screen.
5 Check that the template you saved is shown in the template list.
ENGLISH
1
2
3
4
40
[Supported Photo & Video Files]
ENGLISH
NOTE
•• Subtitles are not supported.
•• The photo feature is not supported in OLED models.
Supported video codecs
Extension
.asf, .wmv
Codec
Video
VC-1 Advanced Profile (except for WMVA), VC-1 Simple and Main Profiles
Audio
WMA Standard (excluding WMA v1/WMA Speech)
Video
Xvid (excluding 3 warp-point GMC), H.264/AVC, Motion Jpeg, MPEG-4
Audio
MPEG-1 Layer I, II, MPEG-1 Layer III (MP3), Dolby Digital, LPCM, ADPCM,
DTS
Video
H.264/AVC, MPEG-4, HEVC
Audio
Dolby Digital, Dolby Digital Plus, AAC, MPEG-1 Layer III (MP3)
.3gp
Video
H.264/AVC, MPEG-4
.3g2
Audio
AAC, AMR-NB, AMR-WB
.mkv
Video
MPEG-2, MPEG-4, H.264/AVC, VP8, VP9, HEVC
Audio
Dolby Digital, Dolby Digital Plus, AAC, PCM, DTS, MPEG-1 Layer I, II, MPEG-1
Layer III (MP3)
Video
H.264/AVC, MPEG-2, HEVC
Audio
MPEG-1 Layer I, II, MPEG-1 Layer III (MP3), Dolby Digital, Dolby Digital Plus,
AAC, PCM
Video
MPEG-1, MPEG-2
Audio
MPEG-1 Layer I, II, MPEG-1 Layer III (MP3)
Video
MPEG-1, MPEG-2
Audio
Dolby Digital, MPEG-1 Layer I, II, DVD-LPCM
.avi
.mp4, .m4v, .mov
.ts, .trp, .tp, .mts
.mpg, .mpeg, .dat
.vob
Maximum transmit ratio
Full HD movie
ULTRA HD movie
(UHD models only.)
1920 x 1080: 20Mbps(Mega bit per second)
H.264 1920 x 1080@60P BP/MP/HP@L4.2 40Mbps
HEVC 1920 x 1080@60P MP@L4.1, Main10 Profile@L4.1 40Mbps
H.264 1920 x 1080@60P 4096 x 2160@30P BP/MP/HP@L5.1 50Mbps
HEVC 4096 x 2160@60P MP@L5.1, Main10 Profile@L5.1 50Mbps
41
Supported Photo File Formats
Format
.jpeg, .jpg, .jpe
JPEG
.png
PNG
.bmp
BMP
Resolution
•• Min: 64 x 64
•• Max
-- Normal Type: 15360(W) x 8640(H)
-- Progressive Type: 1920(W) x 1440(H)
•• Min: 64 x 64
•• Max: 5760 (W) x 5760 (H)
•• Min: 64 x 64
•• Max: 1920 (W) x 1080 (H)
Tips for using USB storage devices
•• Only USB storage devices are recognized.
•• USB storage devices connected to the monitor through a USB hub may not work properly.
•• USB storage devices that use an automatic recognition program may not be recognized.
•• USB storage devices that use their own drivers may not be recognized.
•• The recognition speed of a USB storage device may depend on each device.
•• Please do not turn off the display or unplug the USB device when the connected USB storage device is working.
When the device is suddenly separated or unplugged, the stored files or the USB storage device may be damaged.
•• Please do not connect the USB storage device which was artificially maneuvered on the PC. The device may cause
the product to malfunction or fail to be played. Remember to only use USB storage devices that store normal music,
image, and/or movie files.
•• Storage devices formatted with utility programs that are not supported by Windows may not be recognized.
•• Please connect power to a USB storage device (over 0.5 A) which requires an external power supply. Otherwise, the
device may not be recognized.
•• Please connect a USB storage device with the cable offered by the device maker.
•• Some USB storage devices may not be supported or operated smoothly.
•• File alignment methods of the USB storage device is similar to Windows XP and filenames can include up to 100
English characters.
•• Be sure to back up important files since data stored in a USB memory device may be damaged. We will not be
responsible for any data loss.
•• If the USB HDD does not have an external power source, the USB device may not be detected. So make sure to
connect it to an external power source.
-- Please use a power adapter for an external power source. No USB cable is provided for an external power source.
ENGLISH
File type
42
ENGLISH
•• If your USB storage device has multiple partitions, or if you use a USB multi-card reader, you can use up to four
partitions or USB memory devices.
•• If a USB storage device is connected to a USB multi-card reader, its volume data may not be detected.
•• If the USB storage device does not work properly, remove it and connect it again.
•• The speed at which a USB storage device is detected differs from device to device.
•• If the USB storage device is connected in Standby Mode, a specific hard disk will automatically be loaded when the
display is turned on.
•• The recommended capacity is 1 TB or less for a USB external hard disk and 32 GB or less for USB memory.
•• Any device with more than the recommended capacity may not work properly.
•• If a USB external hard disk with a [Energy Saving] feature does not work, turn the hard disk off and on again to make
it work properly.
•• USB storage devices (USB 2.0 or below) are also supported. However, they may not work properly in the videos list.
•• A maximum of 999 folders or files can be recognized under one folder.
•• SDHC-type SDs are supported. To use an SDXC card, format it to the NTFS file system first.
•• The exFAT file system is not supported for SD cards and USB storage devices.
•• SD cards are not supported on some models.
43
This feature enables you to group together multiple monitor sets on a single network into the same group and to
distribute content (schedules and playlists) or copy setting data on a group basis. This feature has two modes, Master
and Slave, and it can access the browser on your PC or mobile device.
Master
•• Add, edit, and delete group.
•• Clone your device's settings data.
•• Distribute [Schedule] and [Playlist] on a group basis.
•• All monitor sets initially come in Master mode.
Slave
•• Play [Schedule] and [Playlist] distributed in Master mode.
•• Remove monitor sets for their groups.
•• Monitor sets that have been added to a group are automatically switched to Slave mode. Conversely, when a monitor
set has been deleted from a group, it is automatically initialized and switched to Master mode.
•• If a new Slave has been added to an existing group, or if the [Data Cloning] or the distribution of [schedule] /
[Playlist] has not been properly performed, the [Data Cloning] or [SYNC] button will be activated.
•• You can duplicate the master device's setting data to the group by using [Data Cloning].
•• You can re-download the content distributed to the group by using [Sync].
ENGLISH
Group Manager 2.0
44
[Group Management]
ENGLISH
•• Creating a New Group
1. Click [Add New Group].
2. Enter a group name.
3. Click [Add Device], select the devices you wish to add to the group, and add them.
4. Click [Done], and you will see that a new group has been created.
•• Editing a Group
1. Click the group you wish to edit.
2. Add a new device by using [Add Device].
3. Delete a device by using [Delete Device].
4. Check whether the devices in the group are connected to a network by using [Device Check].
5. If there are any sets of devices in the group that are not [Data Cloning] or content synchronized, [Data Cloning] or
[SYNC] button will be activated.
6. You can re-copy the master device's setting data to the group by using [Data Cloning].
7. You can re-distribute the content distributed to the group by using [Sync].
•• Deleting a Group
1. Click [Delete Group].
2. Select the group you wish to delete and click [Delete].
3. Check that the group you selected has been deleted.
•• All Devices View: This page enables you to manage all slave monitor sets that are connected to the same network.
1. Click [All Devices View].
2. Click [Reset Device Mode].
3. Select the slave monitor set whose device mode you wish to change and click [Reset].
45
[Setting Data Cloning]
[Content Distribution]
1
2
3
4
Select the type of content you wish to distribute (Schedules or Playlists).
Select the content you wish to distribute.
Select the group to which you wish to distribute the content and click [Distribute].
Run the Content Manager app on the slave sets and check that the content has been distributed.
How to Use
•• Monitors: Run/add/delete/edit apps in the Launcher bar.
•• Mobile devices: Run the app in the Launcher bar or access the app from a mobile device using the QR code or URL
provided.
CAUTION
•• You can create up to 25 groups.
•• You can add up to 12 slave devices to a group.
•• You can distribute the schedules stored on external devices after executing Content Manager's import operation.
•• Make sure to delete all schedules stored on the slave sets before distributing any schedules.
•• A list of devices you can add to your desired group appears only when the following conditions have been met:
-- The devices you wish to add must be on the same network as the master device.
-- The devices you wish to add must be in Master mode, and they must not belong to any existing group.
-- The UPnP feature must be enabled (go to [General] > [Network] > UPnP and set it to [On]).
•• Group Manager 2.0 may not work properly in wireless network environments. It is recommended you use a wired
network.
•• Run the initial settings for Slave function when deleting the group.
ENGLISH
1 Select your desired group and click [Clone].
2 Check that the data have been copied on the slave sets.
46
ENGLISH
ScreenShare
This feature allows the screen of a user's device such as a mobile or PC Windows to be shared with a display using a
wireless connection such as WiDi or Miracast.
[How to Use ScreenShare]
1 Connect according to the instructions provided by the guide that can be accessed through the CONNECTION GUIDE
button in the upper right.
2 Once the connection is established, Screen Share between the user device and the monitor is enabled.
NOTE
[Configuring WiDi (Wireless Display)]
WiDi, which is short for Wireless Display, is a system that wirelessly transmits video and audio files from a laptop that
supports Intel WiDi to the display.
This is available only in certain input modes (Composite/Component/RGB/HDMI/DP/OPS/DVI-D).
Other than these modes, LG Signage cannot be detected by your PC.
1 Connect your laptop to AP. (This feature can be used without an AP, but it is recommended that you connect to it
for optimal performance.) Go to “PC Settings”
“PC and Devices”
“Devices” on your laptop.
2 Click “Add Device” in the top center of the screen, and then you will see a list of nearby WiDi-capable LG Signage
monitors. From the list of detected Signage monitors, select one you wish to connect to and click Connect.
3 The screen of your laptop screen appears on the screen of the Signage monitor within 10 seconds. The wireless
environment may affect the screen from displaying. If the connection is poor, the Intel WiDi connection may be lost.
•• For more information on how to use Intel WiDi, visit http://intel.com/go/widi.
•• This feature only works properly with WiDi 3.5 or later versions.
•• This feature only works on Windows 8.1 or later
47
Control Manager
Control and check the status of the display through the Web browser.
This function is available for PCs and mobile devices.
Different features are supported depending on the product.
Function
•• [Dashboard]: Display a summary of the product's status and provides links to each page.
•• [Display] and [Sound]: Provides features such as Screen Brightness, Sound, Input, and Reboot.
•• [Time & Date]: Enable/disable Set Automatically feature and displays/changes the time set for the product.
•• [Network]: Set the name and IP address of your Signage monitor.
•• [Screen Fault Detection]: Display the video output status of the product.
•• [Tile Mode]: Display the tile mode settings of the product.
•• [Fail Over]: Turns the Fail Over feature on or off and sets related items.
•• [Play via URL]: Turn Play via URL on or off and set URLs.
•• [Software Update]: Update the firmware of the product.
•• [Charts]: Output the product's status information such as its temperature and fan status.
•• [Logs]: Output product malfunction records.
•• [System Information]: Output information such as the product's software version and model name.
NOTE
•• When [Screen Rotation] [On] is set to On, [Screen Fault Detection] does not work.
ENGLISH
MANAGEMENT TOOLS
48
ENGLISH
Picture ID
AUDIO
(RGB/DVI)
RS-232C OUT
RS-232C OUT
RS-232C OUT
RS-232C IN
RS-232C IN
RS-232C IN
[Picture ID] is used to change the settings of a specific set (display) using a single IR receiver for multi-vision.
Communication is possible between a monitor with an IR receiver and other monitors using RS-232C cables. Each
monitor is identified by a Set ID. Setting [Picture ID] allows you to only use the remote control with monitors with a
[Set ID] that matches the [Picture ID].
REMOTE
CONTROL IN
1 Assign [Set ID] to the installed monitors as shown below:
2 Press the red [Picture ID] [On] button on the remote control.
3 Make sure that the Picture ID you set is identical to the [Set ID] of the monitory you wish to control.
•• A set with a [Set ID] that is different from the [Picture ID] cannot be controlled by IR signals.
NOTE
•• If [Picture ID] has been set to 2, only the upper right monitor, which has a [Set ID] of 2, can be controlled by IR signals.
•• If you press the green [Picture ID] [Off] button on your remote control, the [Picture ID] for all monitors are turned
off. If you then press any button on the remote control, all monitors can be controlled by IR signals regardless of their
[Set ID]'s.
49
Touch Assistive Menu
This touch-exclusive feature allows the user to configure settings without a remote control.
Touching the screen for a certain period of time or pressing the “Touch Assistive Menu” local key brings up the Touch
Assistive Menu on the screen.
Different features are supported depending on the product.
Function
••
••
••
••
••
••
••
••
-----
[ Home]: Navigates to the Home screen.
[Reader Mode]: A mode with low blue light, which lessens strain on the eyes when reading text.
[Local Key Lock]: Configures the product button (local key) lock function.
[External Input]: Navigates to the external input selection screen.
[Settings]: Navigates to the Settings screen.
[IDB]: Run IDB
[Player]: Run player
[SI]: Go to SI App Selection screen
: Run SI Apps installed with ZIP Type
: Run SI Apps installed with IPK Type
: Go to Developer Mode
: Go to SI Server Setting
ENGLISH
TOUCH
50
ENGLISH
IDB (Interactive Digital Board)
•• This feature may not be available on some models.
•• Different features are supported depending on the product.
This feature provides writing function. To run IDB, press the
Assistive Menu.
(IDB) button or the local key IDB button on the Touch
Function
•• When running IDB, a blank screen appears, and you can use Touch to draw.
•• When you touch the circle icon in the center of the screen, or keep in contact with any part of the screen for a certain
period, the circular menu will expand and appear.
•• Press the center of the expanded circle menu to change it to a small icon. You can move the position by dragging the
middle part.
•• In the circular menu, you can change the pen type and color, and you can erase, revert, and select regions.
•• Touch the left or right arrows on the screen to display the full menu and you can delete all screens or save the current
screen as a file in the internal storage or external storage.
•• You can turn Multi-touch On and Off in the full menu setting. When the Multi-touch function is turned on, the Zoom
button appears and when the Multi-touch function is off, you can zoom in and out using two fingers.
•• Exit IDB with the Exit button in the full menu setting.
•• To connect to a network, press the Start button on IDB and run IDB Duo on the PC that is connected to the same
router as the touch model. Then, enter the 6-digit token displayed on IDB.
•• To display a video connected to a network or external input cable, select the corresponding item in Pair from the full
menu.
•• If you touch the screen while a connected video is being displayed, the Markup Mode button will appear. Switching to
the Markup Mode allows you to capture the full screen to write on it and save it.
NOTE
•• Files stored in IDB’s internal storage are deleted upon closing IDB.
•• IDB does not enable keys except for Volume and Power keys.
•• When Screen Touch is set to Off, IDB is unavailable.
•• IDB is unavailable when Screen Rotation is enabled.
•• Using multiple Touch pens and fingers at the same time, or using Eraser may slow down your work.
51
ENGLISH
IR CODE
•• All models do not support the HDMI/USB function.
•• Some key codes may not be supported depending on the model.
08
Code (Hex)
(Power)
Remarks
Remote control button
C4
MONITOR ON
Remote control button
C5
MONITOR OFF
Remote control button
95
Function
(Energy Saving Mode)
Remote control button
0B
INPUT (Select input)
Remote control button
10
Number Key 0
Remote control button
11
Number Key 1
Remote control button
12
Number Key 2
Remote control button
13
Number Key 3
Remote control button
14
Number Key 4
Remote control button
15
Number Key 5
Remote control button
16
Number Key 6
Remote control button
17
Number Key 7
Remote control button
18
Number Key 8
Remote control button
19
Number Key 9
Remote control button
02
(Vol +)
Remote control button
(Vol -)
Remote control button
03
E0
Brightness
(Page Up)
Remote control button
E1
Brightness
(Page Down)
Remote control button
DC
(3D)
Remote control button
32
1/a/A
Remote control button
2f
CLEAR
Remote control button
7E
Remote control button
79
ARC (Mark/Aspect Ratio)
Remote control button
4D
PSM (Picture Mode)
Remote control button
09
(MUTE)
Remote control button
52
Code (Hex)
ENGLISH
43
99
Function
(Settings/Menu)
Auto Configuration
Remarks
Remote control button
Remote control button
40
(Up)
Remote control button
41
(Down)
Remote control button
06
(Right)
Remote control button
07
(Left)
Remote control button
44
28
(OK)
(BACK)
Remote control button
Remote control button
7B
Tile
Remote control button
5B
Exit
Remote control button
72
Picture ID On (Red)
Remote control button
71
Picture ID Off (Green)
Remote control button
63
Yellow
Remote control button
61
Blue
W.Bal
Remote control button
Remote control button
5F
3F
(S.Menu)
Remote control button
7C
(Home)
Remote control button
97
96
Swap
Mirror
Remote control button
Remote control button
53
•• This only applies to certain models.
Use this method to connect several products to a single PC. You can control several products at a time by connecting
them to a single PC.
In the Option menu, the Set ID must be between 1 and 1000 without being duplicated.
Connecting cables
•• The image may be different according to the model.
Connect the RS-232C cable as shown in the picture.
The RS-232C protocol is used for communication between the PC and product. You can turn the product on/off, select
an input source and adjust the OSD menu from your PC.
Monitor 4
RS-232C
OUT
RS-232C
IN
Monitor 3
RS-232C
OUT
RS-232C
IN
Monitor 2
RS-232C
OUT
RS-232C
IN
4P Cable (sold separately)
PC
Monitor 1
RS-232C Cable (sold separately)
Monitor 2
Monitor 1
RS-232C
OUT
PC
RS-232C
IN
RS-232C Gender
Monitor 3
RS-232C Cable
(sold separately)
Monitor 4
ENGLISH
CONTROLLING MULTIPLE PRODUCTS
54
ENGLISH
Communication Parameter
Baud Rate: 9600 bps
Data Length: 8 bits
Parity Bit: None
Stop Bit: 1 bit
Flow Control: None
Communication Code: ASCII code
NOTE
•• When using 3-wire connections (non-standard), an IR
daisy chain cannot be used.
•• Be sure to only use the provided gender to connect
properly.
•• When you have daisy-chained multiple Signage
products to control them simultaneously, if you
attempt to turn on/off the master device in a
continuous manner, some products may not turn
on. In this case, you can turn those monitors on by
pressing the “MONITOR ON” button, not the Power
button.
(Power)
MONITOR ON
BACK
TILE
ID
ON
OFF
EXIT
55
1
k
x
k
Command
2
a
b
c
Data
(Hexadecimal)
01
02
03
[Power]
[Select input]
[Aspect Ratio]
00 to 02
See [Select Input]
See [Aspect Ratio]
04
[Brightness Control]
j
q
See [Brightness Control]
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
[Picture Mode]
[Contrast]
[Brightness]
[Sharpness]
[Color]
[Tint]
[Color Temperature]
[Balance]
[Sound Mode]
[Mute]
[Volume Control]
[Clock] 1 (year/month/day)
[Clock] 2 (hour/minute/second)
[No Signal Power Off (15 Min)]
[Auto Power Off]
[Language]
Set [Default]
Current Temperature
[Key]
Time Elapsed
Product Serial Number
d
k
k
k
k
k
x
k
d
k
k
f
f
f
m
f
f
d
m
d
f
x
g
h
k
i
j
u
t
y
e
f
a
x
g
n
i
k
n
c
l
y
See [Picture Mode]
00 to 64
00 to 64
00 to 32
00 to 64
00 to 64
70 to D2
00 to 64
See [Sound Mode]
00 to 01
00 to 64
See [Clock] 1
See [Clock] 2
00 to 01
00 to 01
See [Language]
00 to 02
FF
See [Key]
FF
FF
ENGLISH
Command Reference List
56
ENGLISH
1
f
j
j
j
s
s
s
m
k
d
d
d
d
Command
2
z
m
n
o
x
y
z
g
d
d
z
i
j
26
27
28
29
30
31
32
33
34
35
36
37
38
Software Version
[White Balance] Red Gain
[White Balance] Green Gain
[White Balance] Blue Gain
[White Balance] Red Offset
[White Balance] Green Offset
[White Balance] Blue Offset
[Backlight]
[Screen Off]
[Tile Mode]
Check [Tile Mode]
[Tile ID]
[Natural Mode]
39
[Energy Saving] Settings
f
j
40
41
42
43
44
45
46
47
48
49
50
Remote Control/Local Key Lock
[Power On Delay]
[Fail Over] Select
[Fail Over] Input Select
Remote Controller Key Lock
[Local Key Lock]
Check [Status]
[Screen Fault Detection]
[Daylight Saving Time]
[PM Mode]
[ISM Method]
k
f
m
m
t
t
s
t
s
s
j
m
h
i
j
p
o
v
z
d
n, 0c
p
Data
(Hexadecimal)
FF
00 to FE
00 to FE
00 to FE
00 to 7F
00 to 7F
00 to 7F
00 to 64
00 to 01
00 to FF
FF
See [Tile ID]
00 to 01
See [Energy Saving] Settings
00 to 01
00 to FA
00 to 02
See [Fail Over] Input Select
00 to 02
00 to 02
See Check [Status]
00 to 01
See [Daylight Saving Time]
00 to 03
See [ISM Method]
57
51
52
[Network Settings]
[Auto Configuration]
53
[H Position]
f
q
00 to 64
54
[V Position]
f
r
00 to 64
55
[H Size]
f
s
00 to 64
56
[Power On Status]
t
r
00 to 02
57
Wired [Wake On LAN]
f
w
00 to 01
58
[Intelligent Auto]
t
i
00 to 01
59
[OSD Rotation]
t
h
00 to 02
60
[Time Sync]
s
n, 16
00 to 01
61
[Content Sync]
t
g
00 to 01
62
[LAN Daisy Chain]
s
n, 84
00 to 01
63
[Content Rotation]
s
n, 85
00 to 02
64
[Scan Inversion]
s
n, 87
00 to 01
65
[Beacon]
s
n, 88
00 to 01
66
[Brightness Scheduling] Mode
s
m
00 to 01
67
[Brightness Scheduling]
s
s
See [Brightness Scheduling]
68
[Multi Screen] Mode & Input
x
c
See [Multi Screen] Mode & Input
69
[Aspect Ratio] (Multi Screen)
x
d
See [Aspect Ratio] (Multi Screen)
70
[Screen Off] (Multi Screen)
x
e
See [Screen Off] (Multi Screen)
71
[Screen Off Always]
s
n, 0d
00 to 01
72
Screen Video Freeze
k
x
00 to 01
73
Wireless [Wake On LAN]
s
n, 90
00 to 01
74
OSD Lock
k
l
00 to 01
75
[HDMI IT Contents]
s
n, 99
00 to 01
ENGLISH
Command
Data
2
(Hexadecimal)
n, 80(81)(82) See [Network Settings]
u
01
1
s
j
58
ENGLISH
1
Command
2
Data
(Hexadecimal)
76
[On/Off Time Scheduling]
s
n, 9a
See [On/Off Time Scheduling]
77
[Holiday Setting]
s
n, 9b
See [Holiday Setting]
78
[UPnP] Mode
s
n, 9c
00 to 01
79
[Home Dashboard Lock]
s
n, 9d
00 to 01
80
[USB Lock]
s
n, 9e
00 to 01
81
[Wi-Fi Lock]
s
n, 9f
00 to 01
82
[Screen Share Lock]
s
n, a0
00 to 01
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
[Backup via Storage]
[Digital Audio Input]
[Booting Logo Image]
[SoftAP] Mode
[Natural Size]
[Clear Panel Noise]
[Change PIN Code]
Play Internal Storage Media
[No Signal Image]
[Audio Out]
[DPM Wake Up Control]
Fan Failure Check
[Apply to all inputs]
[Frame Control]
Multichannel
s
s
s
s
s
s
s
s
s
s
s
d
s
s
s
n, a1
n, a2
n, a3
n, a4
n, a5
n, a6
n, a7
n, a8
n, a9
n, aa
n, 0b
w
n, 52
n, b7
n, 76
See [Backup via Storage]
00 to 01
00 to 01
00 to 01
00 to 64
01
See [Change PIN Code]
Play Internal Storage Media
00 to 01
00 to 02
00 to 01
FF
01
00 to 01
01 to 09
* Note: Commands may not work when there is no external input used.
* Some commands may not be supported on some models.
59
Transmission
(Command1)(Command2)( )(Set ID)( )(Data)(Cr)
* (Command1): Identifies between the factory setting and the user setting modes.
* (Command 2): This command is used to control the monitor.
* (Set ID): Used for selecting a set you want to control. A unique Set ID can be assigned to each set ranging from 1 to
1000 (01H to FFH) under Settings in the OSD menu. Selecting '00H' for Set ID allows the simultaneous control of all
connected monitors. (The maximum value may differ depending on the model.)
* (Data): Transmits command data. Data count may increase depending on the command.
* (Cr): Carriage Return. This parameter corresponds to '0 x 0D' in ASCII code.
* ( ): White Space. This parameter corresponds to '0 x 20' in ASCII code.
Acknowledgment
(Command2)( )(Set ID)( )(OK/NG)(Data)(x)
* The product transmits an ACK (acknowledgment) based on this format when receiving normal data. At this point,
if the data is FF, it indicates the present status data. If the data is in data write mode, it returns the data of the PC
computer.
* If a command is sent with Set ID '00' (= 0 x 00), the data is reflected to all monitors and they do not send an
acknowledgment (ACK).
* If you send "FF" as the value of the data in control mode via RS-232C, you can check the value currently set for the
relevant feature (not applicable to some features).
* Some commands may not be supported on some models.
ENGLISH
Transmission/Reception Protocol
60
01. [Power] (Command: k a)
ENGLISH
Controls the power on/off status of the monitor.
Transmission
(k)(a)( )([Set ID])( )(Data)(Cr)
Data 00: [Off]
01: [On]
02: [Reboot]
Acknowledgment
(a)( )([Set ID])( )(OK/NG)(Data)(x)
* The Acknowledgment signal is returned properly only when
the monitor is fully powered on.
* There may be a delay between the Transmission and
Acknowledgment signals.
* This feature may not be supported on some models.
03. [Aspect Ratio] (Command: k c)
Adjusts the aspect ratio of your monitor.
Transmission
(k)(c)( )([Set ID])( )(Data)(Cr)
Data 02: [Full Wide]
06: [Original]
Acknowledgment
(c)( )([Set ID])( )(OK/NG)(Data)(x)
* The aspect ratio may differ depending on the model's input
configuration.
04. [Brightness Control] (Command: j q)
Sets the brightness of your monitor.
02. [Select Input] (Command: x b)
Selects an input signal.
Transmission
(x)(b)( )([Set ID])( )(Data)(Cr)
Data 20: AV
40: COMPONENT
60: RGB
70: DVI-D (PC)
80: DVI-D (DTV)
90: HDMI1 (DTV)
A0: HDMI1 (PC)
91: HDMI2/OPS (DTV)
A1: HDMI2/OPS (PC)
92: OPS/HDMI3/DVI-D (DTV)
A2: OPS/HDMI3/DVI-D (PC)
95: OPS/DVI-D (DTV)
A5: OPS/DVI-D (PC)
96: HDMI3/DVI-D (DTV)
A6: HDMI3/DVI-D (PC)
97: HDMI3/HDMI2/DVI-D (DTV)
A7: HDMI3/HDMI2/DVI-D (PC)
98: OPS (DTV)
A8: OPS (PC)
C0: DISPLAYPORT (DTV)
D0: DISPLAYPORT (PC)
E0: SuperSign webOS Player
E1: Others
E2: Multi Screen
E3: Play via URL
Acknowledgment
(b)( )([Set ID])( )(OK/NG)(Data)(x)
* Some input signals may not be available with certain models.
* webOS Player is processed as NG when the content is not
saved.
Transmission
(j)(q)( )([Set ID])( )(Data)(Cr)
Data 00: [Off]
01: [Minimum]
02: [Medium]
03: [Maximum]
04: [Automatic]
05: [Screen Off]
Acknowledgment
(q)( )([Set ID])( )(OK/NG)(Data)(x)
* This feature may not be supported on some models.
05. [Picture Mode] (Command: d x)
Selects a picture mode.
Transmission
(d)(x)( )([Set ID])( )(Data)(Cr)
Data 00: [Mall/QSR]
01: [General]
02: [Gov./Corp.]
03: [Transportation]
04: [Education]
05: [Expert 1]
06: [Expert 2]
08: [APS]
09: [Photo]
11: [Calibration]
Acknowledgment
(x)( )([Set ID])( )(OK/NG)(Data)(x)
* Depending on the model, some picture modes may not be
supported.
61
06. [Contrast] (Command: k g)
09. [Color] (Command: k i)
Adjusts the screen colors.
Transmission
(k)(g)( )([Set ID])( )(Data)(Cr)
Data 00-64: [Contrast] 0-100
Transmission
(k)(i)( )([Set ID])( )(Data)(Cr)
Data 00-64: [Color] 0-100
Acknowledgment
(g)( )([Set ID])( )(OK/NG)(Data)(x)
Acknowledgment
(i)( )([Set ID])( )(OK/NG)(Data)(x)
07. [Brightness] (Command: k h)
Adjusts the screen brightness.
10. [Tint] (Command: k j)
Adjusts the screen tints.
Transmission
(k)(h)( )([Set ID])( )(Data)(Cr)
Data 00-64: [Brightness] 0-100
Transmission
(k)(j)( )([Set ID])( )(Data)(Cr)
Data 00-64: [Tint] Red 50-Green 50
Acknowledgment
(h)( )([Set ID])( )(OK/NG)(Data)(x)
Acknowledgment
(j)( )([Set ID])( )(OK/NG)(Data)(x)
08. [Sharpness] (Command: k k)
Adjusts the screen sharpness.
Transmission
(k)(k)( )([Set ID])( )(Data)(Cr)
Data 00-32: [Sharpness] 0-50
Acknowledgment
(k)( )([Set ID])( )(OK/NG)(Data)(x)
11. [Color Temperature] (Command: x u)
Adjusts the screen color temperature.
Transmission
(x)(u)( )([Set ID])( )(Data)(Cr)
Data 70-D2: 3200K-13000K
Acknowledgment
(u)( )([Set ID])( )(OK/NG)(Data)(x)
* This feature may not be supported on some models.
ENGLISH
Adjusts the screen contrast.
62
12. [Balance] (Command: k t)
ENGLISH
Adjusts the sound balance.
Transmission
(k)(t)( )([Set ID])( )(Data)(Cr)
Data 00-64: Left 50-Right 50
15. [Volume Control] (Command: k f)
Adjusts the playback volume.
Transmission
(k)(f)( )([Set ID])( )(Data)(Cr)
Data 00-64: [Volume] 0-100
Acknowledgment
(t)( )([Set ID])( )(OK/NG)(Data)(x)
* This feature may not be supported on some models.
Acknowledgment
(f)( )([Set ID])( )(OK/NG)(Data)(x)
* This feature may not be supported on some models.
13. [Sound Mode] (Command: d y)
16. [Clock] 1 (year/month/day) (Command: f a)
Selects a sound mode.
Transmission
(d)(y)( )([Set ID])( )(Data)(Cr)
Data 01: [Standard]
02: [Music]
03: [Cinema]
04: [Sports]
05. [Game]
07: [News] ([Clear Voice III])
Acknowledgment
(y)( )([Set ID])( )(OK/NG)(Data)(x)
* This feature may not be supported on some models.
14. [Mute] (Command: k e)
Mutes/unmutes audio.
Transmission
(k)(e)( )([Set ID])( )(Data)(Cr)
Data 00: Quiet (Sound Off)
01: Current Volume Level (Sound On)
Acknowledgment
(e)( )([Set ID])( )(OK/NG)(Data)(x)
* This feature may not be supported on some models.
Sets the Clock 1 (year/month/day) values and Auto Time.
Transmission
1. (f)(a)( )([Set ID])( )(Data1)( )(Data2)( )(Data3)(Cr)
2. (f)(a)( )([Set ID])( )(0)(0)( )(Data1)(Cr)
1. When setting Clock 1 (year/month/day)
Data1 00-: 2010Data2 01-0C: January to December
Data3 01-1F: 1st-31st
* The minimum and maximum values for Data1 differ
depending on the product's release year.
* Enter "fa [Set ID] ff" to view Clock 1 (year/month/day)
settings.
2. When Setting Auto Time
Data1 00: Auto
01: Manual
* To view the set value of the Auto time, enter “fa [Set ID] 00
ff”.
Acknowledgment
1. (a)( )([Set ID])( )(OK/NG)(Data1)(Data2)(Data3)(x)
2. (a)( )([Set ID])( )(OK/NG)(0)(0)(Data1)(x)
63
17. [Clock] 2 (hour/minute/second) (Command: f x)
Transmission
(f)(x)( )([Set ID])( )(Data1)( )(Data2)( )(Data3)(Cr)
Data1 00 to 17: Hour 00 to hour 23
Data2 00 to 3B: Minute 00 to minute 59
Data3 00 to 3B: Second 00 to second 59
* Enter "fx [Set ID] ff" to view the Time 2 (hour/minute/
second) settings.
* This feature is only available when Clock 1 (year/month/day)
has been set.
Acknowledgment
(x)( )([Set ID])( )(OK/NG)(Data1)(Data2)(Data3)(x)
18. [No Signal Power Off (15 Min)] (Command: f g)
Sets the monitor to enter Automatic Standby mode if there is
no signal for 15 minutes.
Transmission
(f)(g)( )([Set ID])( )(Data)(Cr)
Data 00: [Off]
01: [On]
Acknowledgment
(g)( )([Set ID])( )(OK/NG)(Data)(x)
19. [Auto Power Off] (Command: m n)
Activates Auto Power Off when there is no IR signal for 4 hours.
Transmission
(m)(n)( )([Set ID])( )(Data)(Cr)
Data 00: [Off]
01: [On]
Acknowledgment
(n)( )([Set ID])( )(OK/NG)(Data)(x)
20. [Language] (Command: f i)
Sets the OSD language.
Transmission
(f)(i)( )([Set ID])( )(Data)(Cr)
Data 00: Czech
01: Danish
02: German
03: English
04: Spanish (Europe)
05: Greek
06: French
07: Italian
08: Dutch
09: Norwegian
0A: Portuguese
0B: Portuguese (Brazil)
0C: Russian
0D: Finnish
0E: Swedish
0F: Korean
10: Chinese (Mandarin)
11: Japanese
12: Chinese (Cantonese)
13: Arabic
Acknowledgment
(i)( )([Set ID])( )(OK/NG)(Data)(x)
* Some languages may not be available with certain models.
ENGLISH
Sets the Clock 2 values (hour/minute/second).
64
21. Set [Default] (Command: f k)
ENGLISH
Executes Reset.
Initialize Screen can only be executed in RGB input mode.
Transmission
(f)(k)( )([Set ID])( )(Data)(Cr)
Data 00: Picture Reset
01: Initialize Screen
02: Reset to Initial Settings
Acknowledgment
(k)( )([Set ID])( )(OK/NG)(Data)(x)
* This feature may not be supported on some models.
24. Time Elapsed (Command: d l)
Displays the time that has elapsed after your monitor has
turned on.
Transmission
(d)(l)( )([Set ID])( )(Data)(Cr)
Data FF: Reads status
Acknowledgment
(l)( )([Set ID])( )(OK/NG)(Data)(x)
* The data received is displayed in hexadecimal.
25. Product Serial Number (Command: f y)
22. Current Temperature (Command: d n)
Checks the current temperature of the product.
Transmission
(d)(n)( )([Set ID])( )(Data)(Cr)
Data FF: Check status
Acknowledgment
(n)( )([Set ID])( )(OK/NG)(Data)(x)
* The temperature is displayed in hexadecimal.
Checks the serial number of the product.
Transmission
(f)(y)( )([Set ID])( )(Data)(Cr)
Data FF: Checks product serial number
Acknowledgment
(y)( )([Set ID])( )(OK/NG)(Data)(x)
Data is in ASCII format.
26. Software Version (Command: f z)
Checks the software version of the product.
23. [Key] (Command: m c)
Sends a key code for the IR remote control.
Transmission
(m)(c)( )([Set ID])( )(Data)(Cr)
Data IR_KEY_CODE
Acknowledgment
(c)( )([Set ID])( )(OK/NG)(Data)(x)
For key codes, see IR Codes.
* Some key codes may not be supported on some models.
Transmission
(f)(z)( )([Set ID])( )(Data)(Cr)
Data FF: Checks software version
Acknowledgment
(z)( )([Set ID])( )(OK/NG)(Data)(x)
65
27. [White Balance] Red Gain (Command: j m)
30. [White Balance] Red Offset (Command: s x)
Adjusts the red offset value for white balance.
Transmission
(j)(m)( )([Set ID])( )(Data)(Cr)
Data 00 to FE: Red gain 0 to 254
FF: Checks red gain value
Transmission
(s)(x)( )([Set ID])( )(Data)(Cr)
Data 00 to 7F: Red offset 0 to 127
FF: Checks red offset value
Acknowledgment
(m)( )([Set ID])( )(OK/NG)(Data)(x)
Acknowledgment
(x)( )([Set ID])( )(OK/NG)(Data)(x)
28. [White Balance] Green Gain (Command: j n)
Adjusts the green gain value for white balance.
31. [White Balance] Green Offset (Command: s y)
Adjusts the green offset value for white balance.
Transmission
(j)(n)( )([Set ID])( )(Data)(Cr)
Data 00 to FE: Green gain 0 to 254
FF: Checks green gain value
Transmission
(s)(y)( )([Set ID])( )(Data)(Cr)
Data 00 to 7F: Green offset 0 to 127
FF: Checks green offset value
Acknowledgment
(n)( )([Set ID])( )(OK/NG)(Data)(x)
Acknowledgment
(y)( )([Set ID])( )(OK/NG)(Data)(x)
29. [White Balance] Blue Gain (Command: j o)
Adjusts the blue gain value for white balance.
32. [White Balance] Blue Offset (Command: s z)
Adjusts the blue offset value for white balance.
Transmission
(j)(o)( )([Set ID])( )(Data)(Cr)
Data 00 to FE: Blue gain 0 to 254
FF: Checks blue gain value
Transmission
(s)(z)( )([Set ID])( )(Data)(Cr)
Data 00 to 7F: Blue offset 0 to 127
FF: Checks blue offset value
Acknowledgment
(o)( )([Set ID])( )(OK/NG)(Data)(x)
Acknowledgment
(z)( )([Set ID])( )(OK/NG)(Data)(x)
ENGLISH
Adjusts the red gain value for white balance.
66
33. [Backlight] (Command: m g)
ENGLISH
Adjusts the backlight brightness.
Transmission
(m)(g)( )([Set ID])( )(Data)(Cr)
Data 00 to 64: [Backlight] 0 to 100
Acknowledgment
(g)( )([Set ID])()(OK/NG)(Data)(x)
36. Check [Tile Mode] (Command: d z)
Checks the tile mode.
Transmission
(d)(z)( )([Set ID])( )(Data)(Cr)
Data FF: Checks [Tile Mode]
Acknowledgment
(z)( )([Set ID])( )(OK/NG)(Data1)(Data2)(Data3)(x)
Data1 00: [Tile Mode] Off
01: [Tile Mode] on
Data2 00 to 0F: tile column
Data3 00 to 0F: tile row
* This feature may not be supported on some models.
34. [Screen Off] (Command: k d)
Turns off/off the screen.
Transmission
(k)(d)( )([Set ID])( )(Data)(Cr)
Data 00: Screen On
01: Screen Off
Acknowledgment
(d)( )([Set ID])( )(OK/NG)(Data)(x)
* This feature may not be supported on some models.
35. [Tile Mode] (Command: d d)
Sets a tile mode and values for the tile rows and columns.
Transmission
(d)(d)( )([Set ID])( )(Data)(Cr)
Data 00 to FF: the first byte - tile column
The second byte - tile row
* 00, 01, 10, and 11 mean that the tile mode is off
* The maximum value may differ depending on the model.
Acknowledgment
(d)( )([Set ID])( )(OK/NG)(Data)(x)
* This feature may not be supported on some models.
* Video wall models require to be rebooted for the normal
operation after the values are changed.
37. [Tile ID] (Command: d i)
Sets the tile ID value of the product.
Transmission
(d)(i)( )([Set ID])( )(Data)(Cr)
Data 01 to E1: [Tile ID] 1 to 225
FF: Checks the [Tile ID]
* The data value cannot exceed the value of row x column.
Acknowledgment
(i)( )([Set ID])( )(OK/NG)(Data)(x)
* If you enter a value that exceeds the value of row x column
for the Data parameter, Ack becomes NG.
* This feature may not be supported on some models.
* Video wall models require to be rebooted for the normal
operation after the values are changed.
38. [Natural Mode] (In Tile Mode) (Command: d j)
To display the image naturally, the part of the image that
would normally be displayed in the gap between the monitors
is omitted.
Transmission
(d)(j)( )([Set ID])( )(Data)(Cr)
Data 00: [Off]
01: [On]
Acknowledgment
(j)( )([Set ID])( )(OK/NG)(Data)(x)
* This feature may not be supported on some models.
67
39. [Energy Saving] Settings (Command: f j)
Transmission
(f)(j)( )([Set ID])( )(Data)(Cr)
Data 00: [Off]
04: 1 minute
05: 3 minutes
06: 5 minutes
07: 10 minutes
Acknowledgment
(j)( )([Set ID])( )(OK/NG)(Data)(x)
* This feature may not be supported on some models.
42. [Fail Over] Select (Command: m i)
Sets an input mode for fail over.
Transmission
(m)(i)( )([Set ID])( )(Data)(Cr)
Data 00: [Off]
01: [Auto]
02: [Custom]
Acknowledgment
(i)( )([Set ID])( )(OK/NG)(Data)(x)
43. [Fail Over] Input Select (Command: m j)
40. Remote Control/Local Key Lock (Command: k m)
Adjusts the remote control/local key (front) lock.
Transmission
(k)(m)( )([Set ID])( )(Data)(Cr)
Data 00: [Off] (Lock Off)
01: [On] (Lock On)
* When the monitor is turned off, the power key works even in
On (01) mode.
Acknowledgment
(m)( )([Set ID])( )(OK/NG)(Data)(x)
* This feature may not be supported on some models.
41. [Power On Delay] (Command: f h)
Sets the schedule delay for when the power turns on (unit:
seconds).
Transmission
(f)(h)( )([Set ID])( )(Data)(Cr)
Data 00 to FA: min. 0 to max. 250 (seconds)
Acknowledgment
(h)( )([Set ID])( )(OK/NG)(Data)(x)
* The maximum value may differ depending on the model.
Selects an input source for fail over.
* This feature is only available when Fail Over is set to Custom.
Transmission
(m)(j)( )([Set ID])( )(Data1)( )(Data2)( )(Data3)( )
(Data4) … ( )(DataN)(Cr)
Data1 to N (input priority 1 to N)
60: RGB
70: DVI-D
90: HDMI1
91: HDMI2
92: OPS/HDMI3/DVI-D
95: OPS/DVI-D
96: HDMI3/DVI-D
97: HDMI3/HDMI2/DVI-D
98: OPS
C0: DISPLAYPORT
Acknowledgment
(j)( )(SetID)( )(OK/NG)(Data1)(Data2)(Data3)(Data4)
… (DataN)(x)
* Some input signals may not be available with certain models.
* The data number (N) may vary depending on the model. (The
data number depends on the number of supported input
signals.)
* This feature operates as the last input, and supports data in
DTV format.
ENGLISH
Sets the Display Power Management feature.
68
44. Remote Controller Key Lock (Command: t p)
ENGLISH
Configures the settings of the product's remote control key.
Transmission
(t)(p)( )([Set ID])( )(Data)(Cr)
Data 00: All keys lock off
01: Locks on all keys except Power key
02: Locks on all keys
Acknowledgment
(p)( )([Set ID])( )(OK/NG)(Data)(x)
* When the monitor is turned off, the power key works even in
the locks on all of the keys (02) mode.
46. Check [Status] (Command: s v)
Checks the current signal of the product.
Transmission
(s)(v)( )([Set ID])( )(Data)( )(FF)(Cr)
Data 02: Checks whether there is a signal
03: The monitor is currently in [PM Mode]
07: Checks whether the Top, Bottom and Main
temperature sensors are functioning normally.
08: The temperature of each temperature sensor
when the monitor set was last powered off.
09: Fan speed
10: RGB Sensing OK/NG (screen fault detection)
Acknowledgment
(v)( )([Set ID])( )(OK/NG)(Data)(Data1)(x)
Data 02 (when a signal is found)
Data1 00: No signal
01: Signal present
45. [Local Key Lock] (Command: t o)
Configures the local key operation settings of the product.
Transmission
(t)(o)( )([Set ID])( )(Data)(Cr)
Data 00: All keys lock off
01: Locks on all keys except Power key
02: Locks on all keys
Acknowledgment
(o)( )([Set ID])( )(OK/NG)(Data)(x)
* When the monitor is turned off, the power key works even in
the locks on all of the keys (02) mode.
* This feature may not be supported on some models.
Data 03 (when the monitor is currently in PM mode)
Data1 00: [Screen On] is activated.
01: [Screen Off] is activated.
02: [Screen Off Always] is activated.
03: [Sustain Aspect Ratio] is activated.
04: [Screen Off & Backlight] is activated.
Data 07 (when checking whether the Top, Bottom and
Main temperature sensors are working properly)
Data1 00: All temperature sensors faulty
01: Top normal, Bottom faulty, Main faulty
02: Top faulty, Bottom normal, Main faulty
03: Top normal, Bottom normal, Main faulty
04: Top faulty, Bottom faulty, Main normal
05: Top normal, Bottom faulty, Main normal
06: Top faulty, Bottom normal, Main normal
07: All temperature sensors are normal
Data 10 (when executing [Screen Fault Detection])
Data1 00: [Screen Fault Detection] result NG
07: [Screen Fault Detection] result OK
* When screen Fault Detection is set to Off or not supported,
execution results are rendered "NG."
69
Data
Acknowledgment
(v)( )([Set ID])( )(OK/NG)(Data)(Data1)
(Data2)(Data3)(x)
Data1The temperature of the Top sensor when the
monitor set was last powered off.
Data2The temperature of the Bottom sensor when the
monitor set was last powered off.
Data3The temperature of the Main sensor when the
monitor set was last powered off.
Data
09 (when checking the fan speed)
Acknowledgment
(v)( )([Set ID])( )(OK/NG)(Data)(Data1)(Data2)(x)
Data1 00-ff: The upper 1-byte of the fan speed
Data2 00-ff: The lower 1-byte of the fan speed
Fan speed: 0 to 2008 in hexadecimal and 0 to 8200 in
decimal
* This feature may not be supported on some models.
47. [Screen Fault Detection] (Command: t z)
48. [Daylight Saving Time] (Command: s d)
Sets Daylight Savings Time.
Transmission
(s)(d)( )([Set ID])( )(Data1)( )(Data2)( )
(Data3)( ) (Data4)( )(Data5)( )(Cr)
Data1 00: [Off] (Data2-5: FF)
01: Start time
02: End time
Data2 01-0C: January to December
Data3 01 to 06: Weeks 1 to 6
* The maximum value of [Data3] may vary depending on the
date.
Data4 00 to 06 (Sunday to Saturday)
Data5 00 to17: Hour 00 to hour 23
* If you wish to read the start/end times, enter FF for
parameters [Data2] through [Data5].
(E.g. 1: sd 01 01 ff ff ff ff - Checks the end time.)
(E.g. 2: sd 01 02 ff ff ff ff - Checks the start time.)
* This feature only works when Clock 1 (year/month/day) and
Clock 2 (hour/minute/second) have been set.
Acknowledgment
(d)( )([Set ID])( )(OK/NG)(Data1)(Data2)
(Data3)(Data4)(Data5)(x)
* This feature may not be supported on some models.
Sets the Screen Fault Detection feature.
Transmission
(t)(z)( )([Set ID])( )(Data)(Cr)
Data 00: [Off]
01: [On]
Acknowledgment
(z)( )([Set ID])( )(OK/NG)(Data)(x)
* This feature may not be supported on some models.
49. [PM Mode] (Command: s n, 0c)
Sets the PM mode.
Transmission
(s)(n)( )([Set ID])( )(0c)( )(Data)(Cr)
Data 00: Activates Power Off mode
01: Activates [Sustain Aspect Ratio] mode
02: Activates [Screen Off] mode
03: Activates [Screen Off Always] mode
04: Activates [Screen Off & Backlight] mode
Acknowledgment
(n)( )([Set ID])( )(OK/NG)(0c)(Data)(x)
* This feature may not be supported on some models.
ENGLISH
08 (when checking the temperature of each
temperature sensor when the monitor set was
last powered off)
70
50. [ISM Method] (Command: j p)
ENGLISH
Selects an ISM method.
Transmission
(j)(p)( )([Set ID])( )(Data)(Cr)
Data 01: [Inversion] (Invert)
02: [Orbiter] (Move)
04: [White Wash] (Remove; white pattern)
08: [Normal] (Standard)
20: [Color Wash] (Color pattern)
80: [Washing Bar]
90: [User Image]
91: [User Video]
* The jp command only works when the timer has been set to
Immediately.
Acknowledgment
(p)( )([Set ID])( )(OK/NG)(Data)(x)
* This feature may not be supported on some models.
51. [Network Settings] (Command: s n, 80 or 81 or
82)
Configures network and DNS settings.
Transmission
(s)(n)( )([Set ID])( )(Data1)( )(Data2)( )
(Data3)( )(Data4)( )(Data5)(Cr)
Data1 80: Configures/views the temporary IP mode
(Auto/Manual), subnet mask, and gateway.
81: Configures/views the temporary DNS address.
82: Saves temporary settings and views
information about the current network.
* If Data1 is 80,
Data2 00: Auto
01: Manual
FF: Views the temporary IP mode (Auto/Manual),
subnet mask, and gateway.
* If Data 2 is 01 (Manual),
Data3 Manual IP address
Data4 Subnet mask address
Data5 Gateway address
* If Data1 is 81,
Data2 DNS address
FF: Displays the temporary DNS address.
* If Data1 is 82,
Data2 80: Applies the temporarily saved IP mode (Auto/
Manual), subnet mask and gateway.
81: Applies the temporary DNS address
FF: Information on the current network (IP, subnet
gateway and DNS)
* An example of settings,
1. Auto: sn 01 80 00
2. Manual: sn 01 80 01 010177223241 255255254000
010177222001 (IP: 10.177.223.241, subnet:
255.255.254.0, gateway: 10.177.222.1)
3. Network read: sn 01 80 ff
4. DNS settings: sn 01 81 156147035018
(DNS: 156.147.35.18)
5. Applying the settings: sn 01 82 80 (applies the saved IP
mode (auto/manual), subnet mask, and gateway), sn 01 82
81 (applies the saved DNS)
* Each IP address contains 12 decimal digits.
Acknowledgment
(n)( )([Set ID])( )(OK/NG)(Data1)(Data)(x)
* This feature is available only for wired networks.
* This feature may not be supported on some models.
71
52. [Auto Configuration] (Command: j u)
Transmission
(j)(u)( )([Set ID])( )(Data)(Cr)
Data 01: Execution
Acknowledgment
(u)( )([Set ID])( )(OK/NG)(Data)(x)
* This feature may not be supported on some models.
55. [H Size] (Command: f s)
Adjusts the horizontal size of the screen.
* The operational range varies depending on the RGB input
resolution.
(Works only in RGB-PC input mode.)
Transmission
(f)(s)( )([Set ID])( )(Data)(Cr)
Data 00-64: Min -50 (Small) to Max 50 (Large)
Acknowledgment
(s)( )([Set ID])( )(OK/NG)(Data)(x)
* This feature may not be supported on some models.
53. [H Position] (Command: f q)
Adjusts the horizontal position of the screen.
* The operational range varies depending on the RGB input
resolution.
(Works only in RGB-PC input mode.)
Transmission
(f)(q)( )([Set ID])( )(Data)(Cr)
Data 00-64: Min -50 (Left) to Max 50 (Right)
Acknowledgment
(q)( )([Set ID])( )(OK/NG)(Data)(x)
* This feature may not be supported on some models.
54. [V Position] (Command: f r)
Adjusts the vertical position of the screen.
* The operational range varies depending on the RGB input
resolution.
(Works only in RGB-PC input mode.)
Transmission
(f)(r)( )([Set ID])( )(Data)(Cr)
Data 00-64: Min -50 (Down) to Max 50 (Up)
Acknowledgment
(r)( )([Set ID])( )(OK/NG)(Data)(x)
* This feature may not be supported on some models.
56. [Power On Status] (Command: t r)
Sets the Power On status of the monitor.
Transmission
(t)(r)( )([Set ID])( )(Data)(Cr)
Data 00: LST (Maintains the previous power status)
01: STD (Keeps the power off)
02: PWR (Keeps the power on)
Acknowledgment
(r)( )([Set ID])( )(OK/NG)(Data)(x)
57. Wired [Wake On LAN] (Command: f w)
Selects a Wired Wake On LAN option.
Transmission
(f)(w)( )([Set ID])( )(Data)(Cr)
Data 00: [Off]
01: [On]
Acknowledgment
(w)( )([Set ID])( )(OK/NG)(Data)(x)
ENGLISH
Automatically corrects the position and shaking of the picture.
(Works only in RGB-PC input mode.)
72
58. [Intelligent Auto] (Command: t i)
ENGLISH
Selects an Intelligent Auto option.
Transmission
(t)(i)( )([Set ID])( )(Data)(Cr)
Data 00: [Off]
01: [On]
61. [Content Sync] (Command: t g)
Sets Content Sync.
Transmission
(t)(g)( )([Set ID])( )(Data)(Cr)
Data 00: [Off]
01: [On]
Acknowledgment
(i)( )([Set ID])( )(OK/NG)(Data)(x)
* This feature may not be supported on some models.
Acknowledgment
(g)( )([Set ID])( )(OK/NG)(Data)(x)
* This feature may not be supported on some models.
59. [OSD Rotation] (Command: t h)
62. [LAN Daisy Chain] (Command: s n, 84)
Transmission
(t)(h)( )([Set ID])( )(Data)(Cr)
Data 00: [Off]
01: 90 degrees
02: 270 degrees
03: 180 degrees
Transmission
(s)(n)( )([Set ID])( )(8)(4)( )(Data)(Cr)
Data 00: [Off]
01: [On]
Sets the OSD Rotation mode.
Acknowledgment
(h)( )([Set ID])( )(OK/NG)(Data)(x)
* This feature may not be available on some models.
Turns on/off LAN Daisy Chain.
Acknowledgment
(n)( )([Set ID])( )(OK/NG)(8)(4)(Data)(x)
* This feature may not be supported on some models.
63. [Content Rotation] (Command: s n, 85)
60. [Time Sync] (Command: s n, 16)
Sets Time Sync.
Transmission
(s)(n)( )([Set ID])( )(1)(6)( )(Data)(Cr)
Data 00: [Off]
01: [On]
* This feature only works when the monitor is in Master mode.
* This feature does not work if the current time is not set.
Acknowledgment
(n)( )([Set ID])( )(OK/NG)(1)(6)(Data)(x)
* This feature may not be supported on some models.
Turns on/off Content Rotation.
Transmission
(s)(n)( )([Set ID])( )(8)(5)( )(Data)(Cr)
Data 00: [Off]
01: 90 degrees
02: 270 degrees
03: 180 degrees
Acknowledgment
(n)( )([Set ID])( )(OK/NG)(8)(5)(Data)(x)
* This feature may not be supported on some models.
73
64. [Scan Inversion] (Command: s n, 87)
Transmission
(s)(n)( )([Set ID])( )(8)(7)( )(Data)(Cr)
Data 00: [Off]
01: [On]
Acknowledgment
(n)( )([Set ID])( )(OK/NG)(8)(7)(Data)(x)
* This feature may not be supported on some models.
* Video wall models require to be rebooted for the normal
operation after the values are changed.
65. [Beacon] (Command: s n, 88)
Turns on/off Beacon.
Transmission
(s)(n)( )([Set ID])( )(8)(8)( )(Data)(Cr)
Data 00: [Off]
01: [On]
Acknowledgment
(n)( )([Set ID])( )(OK/NG)(8)(8)(Data)(x)
* This feature may not be supported on some models.
66. [Brightness Scheduling] Mode (Command: s m)
Selects a Brightness Scheduling mode.
Transmission
(s)(m)( )([Set ID])( )(Data)(Cr)
Data 00: Brightness Scheduling off
01: Brightness Scheduling on
* This feature does not work if the current time is not set.
* This feature may not be supported on some models.
Acknowledgment
(m)( )([Set ID])( )(OK/NG)(Data)(x)
67. [Brightness Scheduling] (Command: s s)
Sets Brightness Scheduling.
Transmission
(s)(s)( )([Set ID])( )(Data1)( )(Data2)( )(Data3)(Cr)
Data1
1. f1 to f6 (data reading)
F1: Reads the 1st brightness schedule's data
F2: Reads the 2nd brightness schedule's data.
F3: Reads the 3rd brightness schedule's data.
F4: Reads the 4th brightness schedule's data.
F5: Reads the 5th brightness schedule's data.
F6: Reads the 6th brightness schedule's data.
FF: Reads all stored lists
3. e1 to e6 (Deletes one index), e0 (Deletes all indexes)
E0: Deletes all brightness schedules.
E1: Deletes the 1st brightness schedule.
E2: Deletes the 2nd brightness schedule.
E3: Deletes the 3rd brightness schedule.
E4: Deletes the 4th brightness schedule.
E5: Deletes the 5th brightness schedule.
E6: Deletes the 6th brightness schedule.
4. 00 to 17: Hour 00 to hour 23
Data2 00 to 3B: Minute 00 to minute 59th
Data2 00 to 64: Backlights 0 to 100
* To read or delete a brightness schedule you have set, [Data2]
[Data3] must be set to FF.
* If you want to read all configured brightness schedules
through FF, do not enter any values in [Data2][Data3].
* When all configured brightness schedules are read through
FF, OK is acknowledged even if there is no stored list.
Example 1: fd 01 f1 ff ff - Reads the 1st index data in
Brightness Scheduling.
ex2: sn 01 1b ff ff ff ff – Reads all index data in in Brightness
Scheduling.
Example 3: fd 01 e1 ff ff - Deletes the 1st index data in
Brightness Scheduling.
Example 4: ss 01 07 1E 46 - Adds a schedule whose time is
07:30 and whose backlight is 70.
* This feature may not be supported on some models.
Acknowledgment
(s)( )([Set ID])( )(OK/NG)(Data1)(Data2)(Data3)(x)
ENGLISH
Turns on/off Scan Inversion.
74
68. [Multi Screen] Mode & Input (Command: x c)
ENGLISH
Saves and controls Multi Screen modes and inputs.
Transmission
(x)(c)( )([Set ID])( )(Data1)( )(Data2)( )(Data3( )(Data4)
( )(Data5)( )(Cr)
Data1 (Sets MultiScreen mode)
10: PIP
22: PBP2
23: PBP3
24: PBP4
Data2 (Sets the MultiScreen Main Input)
Data3 (sets the MultiScreen Sub1 Input)
Data4 (sets the MultiScreen Sub2 Input)
Data5 (sets the MultiScreen Sub3 Input)
80: DVI-D
90: HDMI1
91: HDMI2/OPS
92: OPS/HDMI3/DVI-D
95: OPS/DVI-D
96: HDMI3/DVI-D
97: HDMI3/HDMI2/DVI-D
98: OPS
C0: DISPLAYPORT
*
*
*
*
Acknowledgment
(c)( )([Set ID])( )(OK/NG)( )(Data1)(Data2)(Data3)
(Data4)(Data5)(x)
This feature may not be supported on some models.
Only the input modes supported by the model works.
This feature operates as the last input, and supports data in
DTV format.
Please add the following statement: “When the Read
operation is performed, 00 is returned if it is not an external
input.”
69. [Aspect Ratio] (Multi Screen) (Command: x d)
Saves and controls aspect ratios (Multi Screen).
Transmission
(x)(d)( )([Set ID])( )(Data1)( )(Data2)(Cr)
Data1 Controls the Main input
02: Controls the Sub1 input
03: Controls the Sub2 input
04: Controls the Sub3 input
Data2 00: [Full]
01: [Original]
Acknowledgment
(d)( )([Set ID])( )(OK/NG)(Data1)(Data2)(x)
* This feature may not be supported on some models.
70. [Screen Off] (Multi Screen) (Command: x e)
Turns on/off each screen in the Multi Screen.
Transmission
(x)(e)( )([Set ID])( )(Data1)( )(Data2)(Cr)
Data1 Controls the Main input
02: Controls the Sub1 input
03: Controls the Sub2 input
04: Controls the Sub3 input
Data2 00: Screen off
01: Turns the screen off.
* This feature only works when the Multi Screen app is running.
* This feature does not work when there is no signal.
Acknowledgment
(e)( )([Set ID])( )(OK/NG)(Data1)(Data2)(x)
* This feature may not be supported on some models.
71. [Screen Off Always] (Command: s n, 0d)
If you activate the Screen Off Always feature, the monitor
enters Screen Off mode regardless of whether or not you have
activated PM mode.
Transmission
(s)(n)( )([Set ID])( )(0)(d)( )(Data)(Cr)
Data 00: [Off]
01: [On]
Acknowledgment
(n)( )([Set ID])( )(OK/NG)(0)(d)(Data)(x)
* This feature may not be supported on some models.
72. Screen Video Freeze (Command: k x)
Controls pauses of the video.
Transmission
(k)(x)( )([Set ID])( )(Data)(Cr)
Data 00: Turns on the freeze function.
01: Turns off the Freeze feature.
* This feature only works in single input mode.
Acknowledgment
(x)( )([Set ID])( )(OK/NG)(Data)(x)
* This feature may not be supported on some models.
75
73. Wireless [Wake On LAN] (Command: s n, 90)
Transmission
(s)(n)( )([Set ID])( )(9)(0)( )(Data)(Cr)
Data 00: [Off]
01: [On]
Acknowledgment
(n)( )([Set ID])( )(OK/NG)(9)(0)(Data)(x)
* This feature may not be supported on some models.
74. OSD Lock (Command: k l)
Sets OSD Lock.
Transmission
(k)(l)( )([Set ID])( )(Data)(Cr)
Data 00: O
SD Lock
01: U
nlock OSD Lock
Acknowledgment
(l)( )([Set ID])( )(OK/NG)(Data)(x)
75. [HDMI IT Contents] (Command: s n, 99)
Automatically sets the picture mode based on HDMI data.
Transmission
(s)(n)( )([Set ID])( )(9)(9)( )(Data)(Cr)
Data 00: [Off]
01: [On]
Acknowledgment
(n)( )([Set ID])( )(OK/NG)(9)(9)(Data)(x)
* This feature may not be supported on some models.
76. [On/Off Time Scheduling] (Command: s n, 9a)
Sets on/off time schedules.
Transmission
1. (s)(n)( )([Set ID])( )(9)(a)( )
(Data1)( )(Data2)( )(Data3)( )(Data4)( )(Data5)(Cr)
2. (s)(n)( )([Set ID])( )(9)(a)( )(Data1)( )(Data2)(Cr)
3. (s)(n)( )([Set ID])( )(9)(a)( )(Data1)(Cr)
1. Setting an On/Off Time
Data1 Select the desired day of the week
01: Sunday
02: Monday
03: Tuesday
04: Wednesday
05: Thursday
06: Friday
07: Saturday
Data2 Set an On Time (hour)
00 to 17: Hour 00 to hour 23
Data3 Set an On Time (minute)
00 to 3B: Minute 00 to minute 59
Data4 Set an Off Time (hour)
00 to 17: Hour 00 to hour 23
Data5 Set an Off Time (minute)
00 to 3B: Minute 00 to minute 59
2. Checking a Schedule
Data1 Select the desired schedule.
F1: Reads the schedule for Sunday
F2: Reads the schedule for Monday
F3: Reads the schedule for Tuesday
F4: Reads the schedule for Wednesday
F5: Reads the schedule for Thursday
F6: Reads the schedule for Friday
F7: Reads the schedule for Saturday
Data2
FF
3. Deleting a Schedule
E0: Deletes all schedules
E1: Deletes the schedule for Sunday
E2: Deletes the schedule for Monday
E3: Deletes the schedule for Tuesday
E4: Deletes the schedule for Wednesday
E5: Deletes the schedule for Thursday
E6: Deletes the schedule for Friday
E7: Deletes the schedule for Saturday
* This feature does not work if the current time is not set.
Acknowledgment
1. (n)( )([Set ID])( )(OK/NG)(9)(a)
(Data1)(Data2)(Data3)(Data4)(Data5)(x)
2. (n)( )([Set ID])( )(OK/NG)(9)(a)(f)(1-7)
(Data1)(Data2)(Data3)(Data4)(Data5)(x)
3. (n)( )([Set ID])( )(OK/NG)(9)(a)(Data1)(x)
* This feature may not be supported on some models.
ENGLISH
Sets the Wireless Wake-on-LAN feature.
76
77. [Holiday Setting] (Command: s n, 9b)
ENGLISH
Sets holidays.
Transmission
1. (s)(n)( )([Set ID])( )(9)(b)( )
(Data1)( )(Data2)( )(Data3)( )
(Data4)( )(Data5)( )(Data6)(Cr)
2. (s)(n)( )([Set ID])( )(9)(b)( )(Data1)( )(Data2)(Cr)
3. (s)(n)( )([Set ID])( )(9)(b)( )(Data1)(Cr)
1. Setting a Holiday
Data1 Start year
00-: 2010Data2 Start month
01 to 0c: January to December
Data3 Start date
01 to 1F: 1st to 31st
Data4 For how long from the start year/month/date
01-07: For 1 to 7 days
Data5 Repetition
00: None
01: Every month
02: Every Year
Data6 Repeats the schedule on a date/day-of-the-week
basis.
01: On a date basis.
02. On a day-of-the-week basis.
* The minimum and maximum values for [Data1] differ
depending on the product's release year.
* You can input a value for [Data 6] only when a value has
already been set for [Data 5] (every year or every month).
2. Checking a Schedule
Data1 Select the desired schedule.
F1: Reads the 1st schedule
F2: Reads the 2nd schedule
F3: Reads the 3rd schedule
F4: Reads the 4th schedule
F5: Reads the 5th schedule
F6: Reads the 6th schedule
F7: Reads the 7th schedule
Data2
FF
3. Deleting a Schedule
E0: Deletes all schedules
E1: Deletes the 1st schedule
E2: Deletes the 2nd schedule
E3: Deletes the 3rd schedule
E4: Deletes the 4th schedule
E5: Deletes the 5th schedule
E6: Deletes the 6th schedule
E7: Deletes the 7th schedule
* This feature does not work if the current time is not set.
Acknowledgment
1. (n)( )([Set ID])( )(OK/NG)(9)(b)
(Data1)(Data2)(Data3)(Data4)(Data5)(Data6)(x)
2. (n)( )([Set ID])( )(OK/NG)(9)(b)(f)(1-7)
(Data1)(Data2)(Data3)(Data4)(Data5)(Data6)(x)
3. (n)( )([Set ID])( )(OK/NG)(9)(b)(Data1)(x)
* This feature may not be supported on some models.
78. [UPnP] Mode (Command: s n, 9c)
Sets UPnP.mode.
Transmission
(s)(n)( )([Set ID])( )(9)(c)( )(Data)(Cr)
Data 00: [Off]
01: [On]
Acknowledgment
(n)( )([Set ID])( )(OK/NG)(9)(c)(Data)(x)
* This feature may not be supported on some models.
* Changing UPnP mode results in a reboot.
77
79. [Home Dashboard Lock] (Command: s n, 9d)
Transmission
(s)(n)( )([Set ID])( )(9)(d)( )(Data)(Cr)
Data 00: [Off]
01: [On]
82. [Screen Share Lock] (Command: s n, a0)
Sets Screen Share Lock.
Transmission
(s)(n)( )([Set ID])( )(a)(0)( )(Data)(Cr)
Data 00: [Off]
01: [On]
Acknowledgment
(n)( )([Set ID])( )(OK/NG)(9)(d)(Data)(x)
* This feature may not be supported on some models.
Acknowledgment
(n)( )([Set ID])( )(OK/NG)(a)(0)(Data)(x)
* This feature may not be supported on some models.
80. [USB Lock] (Command: s n, 9e)
83. [Backup via Storage] (Command: s n, a1)
Sets USB Lock.
Transmission
(s)(n)( )([Set ID])( )(9)(e)( )(Data)(Cr)
Data 00: [Off]
01: [On]
Acknowledgment
(n)( )([Set ID])( )(OK/NG)(9)(e)(Data)(x)
* This feature may not be supported on some models.
81. [Wi-Fi Lock] (Command: s n, 9f)
Sets Wi-Fi Lock.
Transmission
(s)(n)( )([Set ID])( )(9)(f)( )(Data)(Cr)
Data 00: [Off]
01: [On]
Acknowledgment
(n)( )([Set ID])( )(OK/NG)(9)(f)(Data)(x)
* This feature may not be supported on some models.
Sets Backup via Storage.
Transmission
1. (s)(n)( )([Set ID])( )(a)(1)( )(Data1)(Cr)
2. (s)(n)( )([Set ID])( )(a)(1)( )(Data1)(Data2)(Cr)
1. Disabling Backup via Storage.
Data1 00: [Off]
2. Setting Backup via Storage to Auto
Data1 01: [Auto]
Data2 01: [30 Min]
02: [1 Hour]
03: [2 Hours]
04: [3 Hours]
3. Setting Backup via Storage to Manual
Data1 02: Manual
4. Setting Backup via Storage to SuperSign Content
Data1 03: SuperSign content
Acknowledgment
1.(n)( )([Set ID])( )(OK/NG)(a)(1)(Data1)(x)
2.(n)( )([Set ID])( )(OK/NG)(a)(1)(Data1)(Data2)(x)
* This feature may not be supported on some models.
ENGLISH
Sets Home Dashboard Lock.
78
84. [Digital Audio Input] (Command: s n, a2)
ENGLISH
Sets Digital Audio Input.
Transmission
(s)(n)( )([Set ID])( )(a)(2)( )(Data)(Cr)
Data 00: [Digital]
01: [Analog]
Acknowledgment
(n)( )([Set ID])( )(OK/NG)(a)(2)(Data)(x)
* This feature may not be supported on some models.
85. [Booting Logo Image] (Command: s n, a3)
Sets Booting Logo Image.
Transmission
(s)(n)( )([Set ID])( )(a)(3)( )(Data)(Cr)
Data 00: [Off]
01: [On]
Acknowledgment
(n)( )([Set ID])( )(OK/NG)(a)(3)(Data)(x)
* This feature may not be supported on some models.
87. [Natural Size] (Command: s n, a5)
Sets Natural Size.
Transmission
(s)(n)( )([Set ID])( )(a)(5)( )(Data)(Cr)
Data 00-64: [Natural Size] 0-100
Acknowledgment
(n)( )([Set ID])( )(OK/NG)(a)(5)(Data)(x)
* This feature may not be supported on some models.
88. [Clear Panel Noise] (Command: s n, a6)
Immediately executes Clear Panel Noise.
Transmission
(s)(n)( )([Set ID])( )(a)(6)( )(Data)(Cr)
Data 01: Execution
Acknowledgment
(n)( )([Set ID])( )(OK/NG)(a)(6)(Data)(x)
* This feature may not be supported on some models.
89. [Change PIN Code] (Command: s n, a7)
86. [SoftAP] Mode (Command: s n, a4)
Sets SoftAP Mode.
Transmission
(s)(n)( )([Set ID])( )(a)(4)( )(Data)(Cr)
Data 00: [Off]
01: [On]
Acknowledgment
(n)( )([Set ID])( )(OK/NG)(a)(4)(Data)(x)
* This feature may not be supported on some models.
Changes PIN Code.
Transmission
(s)(n)( )([Set ID])( )(a)(7)( )(Data1)(Data2)(Data3)
(Data4)( )(Data5)(Data6)(Data7)(Data8)(Cr)
Data 1-4: 0-9 (Existing PIN code)
Data 5-8: 0-9 (New PIN code)
Acknowledgment
(n)( )([Set ID])( )(OK/NG)(a)(7)( )(Data1)(Data2)
(Data3)(Data4)( )(Data5)(Data6)(Data7)(Data8)(x)
* This feature may not be supported on some models.
79
90. Play Internal Storage Media (Command: s n, a8)
Transmission
(s)(n)( )([Set ID])( )(a)(8)( )(Data)(Cr)
Data 01: [Play]
93. [DPM Wake Up Control] (Command: s n, 0b)
Selects a DPM Wake Up option.
Transmission
(s)(n)( )([Set ID])( )(0)(b)( )(Data)(Cr)
Data 00: [Clock]
01: [Clock+DATA]
Acknowledgment
(n)( )([Set ID])( )(OK/NG)(0)(b)(Data)(x)
* This feature may not be supported in some models.
Acknowledgment
(n)( )([Set ID])( )(OK/NG)(a)(8)( )(Data)(x)
* This feature may not be supported on some models.
94. Fan Failure Check (Command: d w)
Check the fan malfunction.
91. [No Signal Image] (Command: s n, a9)
Turns on/off No Signal Image.
Transmission
(s)(n)( )([Set ID])( )(a)(9)( )(Data)(Cr)
Data 00: [Off]
01: [On]
Acknowledgment
(n)( )([Set ID])( )(OK/NG)(a)(9)(Data)(x)
* This feature may not be supported on some models.
92. [Audio Out] (Command: s n, aa)
Controls the status of Audio Out (Volume Mute, Variable, Fixed,
or Off).
Transmission
(s)(n)( )([Set ID])( )(a)(a)( )(Data)(Cr)
Data 00: [Off]
01: [Variable]
02: [Fixed]
Acknowledgment
(n)( )([Set ID])( )(OK/NG)(a)(a)(Data)(x)
* This feature may not be supported on some models.
Transmission
(d)(w)( )([Set ID])( )(Data)(Cr)
Data FF: Read status
Acknowledgment
(w)( )([Set ID])( )(OK/NG)(Data1)(Data2)(x)
Data1 00: Fan failure
01: Fan normal
Data2 00: 0 faults (Fan Normal)
01: 1 fault
02: 2 faults
03: 3 faults
04: 4 faults
05: 5 faults
06: 6 faults
07: 7 faults
08: 8 faults
09: 9 faults
0A: 10 are faulty.
* This feature may not be available on some models.
ENGLISH
Plays the media stored on the monitor's internal storage.
Internal storage media: videos and images stored on the
monitor's internal storage after being exported via Contents
Management Player.
Not applicable: Template content, SuperSign content, and
playlist content.
80
95. [Apply to all inputs] (Command: s n, 52)
ENGLISH
Apply the video mode and low value of the current input to the
same video value of all inputs.
Transmission
(s)(n)( )([Set ID])( )(5)(2)( )(Data)(Cr)
Data 01: [Apply]
Acknowledgment
(n)( )([Set ID])( )(OK/NG)(5)(2)(Data)(x)
* This feature may not be available on some models.
* Other commands do not work for a certain time after
applying.
96. [Frame Control] (Command: s n, b7)
Controls Frame Control.
Transmission
(s)(n)( )([Set ID])( )(b)(7)( )(Data)(Cr)
Data 00: Off
01: On
Acknowledgment
(n)( )([Set ID])( )(OK/NG)(b)(7)(Data)(x)
* This feature may not be available for all models.
* Video wall models require to be rebooted for the normal
operation after the values are changed.
97. Multichannel (Command: s n, 76)
Switches channels.
Transmission
(s)(n)( )([Set ID])( )(7)(6)( )(Data)(Cr)
Data 01 - 09: Channel to switch to
Acknowledgment
(n)( )([Set ID])( )(OK/NG)(7)(6)(Data)(x)
* This feature may not be available for all models.
USER MANUAL
LG Digital
Signage
(MONITOR SIGNAGE)
Please read this manual carefully before operation and retain it for future
reference.
Interactive Digital Board
www.lg.com
2
ENGLISH
CONTENTS
IDB APP..........................................3
-- Using IDB APP.....................................................................4
TOOL MENU
GLOBAL MENU
-- Connect...................................................................................7
Connect with network
Connect via external input cable
Select shared screen
Write on shared screen (the markup mode)
IDB DUO..........................................9
-- System Requirements.....................................................9
Windows
macOS
-- Join a Session....................................................................10
-- Screen Share.....................................................................11
-- Settings................................................................................12
3
NOTE
IDB APP
This feature provides writing function. To run IDB, press the
Assistive Menu.
(IDB) button or the local key IDB button on the Touch
Function
•• When running IDB, a blank screen appears, and you can use Touch to draw.
•• When you touch the circle icon in the center of the screen, or keep in contact with any part of the screen for a certain
period, the circular menu will expand and appear.
•• Press the center of the expanded circle menu to change it to a small icon. You can move the position by dragging the
middle part.
•• In the circular menu, you can change the pen type and color, and you can erase, revert, and select regions.
•• Touch the left or right arrows on the screen to display the full menu and you can delete all screens or save the current
screen as a file in the internal storage or external storage.
•• You can turn Multi-touch on and off in the settings of the full menu. When the Multi-touch function is turned on, the
Zoom button appears and, when the Multi-touch function is turned off, you can zoom in and out using two fingers.
•• You can exit IDB by using the Exit button in the settings of the full menu.
•• For network connection, press the Start button in IDB, run IDB DUO in the PC that is connected to the same router as
the Touch model and, when connected, enter the 6-digit token displayed on the IDB.
•• To display videos connected via a network or external input cable, select the corresponding item in the connection
items of the full menu.
•• When a connected video is being displayed, the Markup Mode button will appear if you touch the screen. When
switched to the Markup Mode, you can capture the current screen, write on it and save it.
NOTE
•• IDB does not enable keys except for Volume and Power keys.
•• When Screen Touch is set to Off, IDB is unavailable.
•• IDB is unavailable when Screen Rotation is enabled.
•• Using multiple Touch pens and fingers at the same time, or using Eraser may slow down your work.
•• Up to 20 devices can be supported when connecting to a network.
ENGLISH
•• Software-related content may be changed without prior notice due to upgrades of the product functions.
•• Some features described in the User Manual may not be supported in certain models and countries.
4
ENGLISH
Using IDB APP
TOOL MENU
1
2
3
4
5
6
No.
Item
Description
1
Pen
You can select Pen and the desired color.
2
Marker
Marker is thicker than Pen and you can choose the desired color.
3
Highlighter
Highlighter is translucent, unlike Marker or Pen, and you can choose the desired color.
4
Eraser
By using Eraser, you can partially erase pictures drawn with Pen, Marker or
Highlighter. You can also adjust the size of Eraser.
5
Select
You can select a drawn picture. You can also adjust its size or move and erase it.
6
Undo
You can restore the picture to the previous state.
NOTE
•• Available Pen/Marker colors:
•• Pen color is set to black and white for whiteboard and blackboard, respectively.
•• Available Highlighter colors:
•• Eraser, Undo, and Select tools are activated after writing.
5
GLOBAL MENU
ENGLISH
Global Menu can be accessed from both sides.
1
2
3
4
5
No.
Item
Description
1
[Connect]
Starts/ends connection sessions. When devices are connected, you can check the list and
select devices.
2
[Capture]
Captures the current screen.
3
[Erase All]
Erases all pictures drawn on the screen.
4
[Storage]
You can check the list of capture files stored in the internal/external storage device to
open, copy or delete the files.
5
[Setting]
•• Turns on/off Multi draw
•• Whiteboard/Blackboard - Changes the background color.
•• Open source license
•• Exit from app
NOTE
•• [Capture] and [Erase All] are activated after writing.
•• The values of Multi draw, Whiteboard, and Blackboard in Setting remain after IDB ends.
6
Multi draw
ENGLISH
•• When set to [Multi Draw On]
-- 10-touch point is supported for simultaneous writing.
-- The hand, zoom-in, and zoom-out tools appear and two-finger gestures are disabled.
•• When set to [Multi Draw Off]
-- The zoom-in and zoom-out functions using two fingers can be used.
-- Writing is available with only 1-point touch.
•• Zoom in/Zoom out
Zoom in (maximum 500%)
Zoom out (minimum 100%)
7
Connect with network
1 Install the IDB Duo application on the PC.
2 On the IDB app, click the Start Session button to create a token.
3 Run the IDB Duo application on the PC, search for devices and enter the token. (See page 10)
4 Select the screen to share on the PC. (See page 11)
NOTE
•• The Signage and PC to be connected must be connected to the same network.
-- Activation of the UPnP function in the Signage ([general] > [Network] > [UPnP]: Set to [On])
•• If you cannot search for Signage devices in IDB Duo on the PC, check the PC’s firewall settings or security program.
ENGLISH
Connect
8
Connect via external input cable
ENGLISH
Share a screen in IDB using external input cables, such as HDMI and DVI.
Select shared screen
Select a connected device to start Screen Share. Reselect the device to stop Screen Share.
Touch the
button that appears when you touch the screen during Screen Share to end Screen Share.
Write on shared screen (the markup mode)
Touch the screen during Screen Share to display the
button.
Touch
button to switch to the Markup Mode, in which you can capture the shared screen and write on it.
9
System Requirements
Windows
Operating system: Windows 7, Windows 10 (32bit or 64bit)
CPU: 2.7GHz+ Dual Core Broadwell or newer
Memory: 4 GB RAM
Hard drive: 1 GB of free space
Graphics hardware: Intel Iris or newer, Nvidia, ATI
macOS
Operating system: macOS 10.12 “Sierra” or newer
CPU: Any CPU
Memory: 4 GB RAM
Hard drive: 1 GB of free space
Graphics hardware: Any GPU
NOTE
•• It is recommended to use Aero for Windows 7.
ENGLISH
IDB DUO
10
ENGLISH
Join a Session
When you install and run the IDO Duo application on the PC, devices available for connection will be searched.
1
2
No.
Item
Description
1
List of
devices
Shows devices available for connection. If multiple devices are available for connection, they
are listed under the selection area.
2
Enter token
Enter the token that appears on the set to connect to the set.
11
ENGLISH
Screen Share
Select the screen of the PC to be shared with IDB.
1
2
4
5
6
3
No.
Item
Description
1
Status icon
2
Screen list
Shows the full PC screen and list of running applications. Terminated or minimized
applications are not shown on the list.
3
Share
Touch this button to start Screen Share.
4
Thumbnail
Displays the thumbnail screen that is being shared.
5
Stop
Stops Screen Share.
6
Switch
screen
Switches the shared screen.
NOTE
•• Once Screen Share starts, it is displayed on the connection list under IDB’s Global Menu. You may stop or re-start
Screen Share in IDB.
12
ENGLISH
Settings
Allows you to see information about the IDB Duo application or change languages.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising