LG | AP151MBA1 | User guide | LG AP151MWA1 用戶指南

LG AP151MWA1 用戶指南
Installation
• Do not install the appliance in the following environment.
- Where combustible gas may leak
- Where industrial oil or metallic particulates are present
- Near the vehicle window, electric pad or stove
- Inside a blanket
- A position of high temperature or high humidity such as a dry
sauna or swimming pool
• Do not let the moisture from the humidifier directly touch the
appliance.
Operation
OWNER'S MANUAL
PORTABLE AIR PURIFIER
Read this owner's manual thoroughly before operating the
appliance and keep it handy for reference at all times.
The date of manufacture is indicated on the label on the
side of the product. Date Form: YY.MM
AP151MWA1 AP151MBA1
MFL71380807
Rev.01_072519
www.lg.com
Copyright © 2019 LG Electronics Inc. All Rights Reserved.
SAFETY INSTRUCTIONS
The following safety guidelines are intended to prevent
unforeseen risks or damage from unsafe or incorrect operation
of the appliance.
The guidelines are separated into ‘WARNING’ and ‘CAUTION’ as
described below.
This symbol is displayed to indicate matters and operations that
can cause risk. Read the part with this symbol carefully and
follow the instructions in order to avoid risk.
! WARNING
This indicates that the failure to follow the instructions can
cause serious injury or death.
! CAUTION
This indicates that the failure to follow the instructions can
cause minor injury or damage to the product.
IMPORTANT SAFETY INSTRUCTIONS
• When severe thunder and lighting occur, do not use the product
in an outdoor environment, and disconnect the power cable and
the charger from the product.
• Do not attempt to operate the product during driving, walking
or moving.
• Do not use or charge the product when it is wet.
• Protect the charging terminal from foreign substances.
• Only an authorized repair person from LG Electronics service
centre should disassemble, repair, or modify the appliance.
• If the appliance is immersed in water, stop using it and contact
the LG Electronics service centre.
• Do not use or store flammable or combustible materials near
the product.
• If you detect any abnormal noise, odour or smoke, unplug the
product immediately and contact an LG Electronics service
centre.
• Do not allow the charging cable to be pressed, bent forcibly by
a heavy object or damaged by a pet.
• Do not insert hands, metal objects or flammble objects into the
air inlet/outlet or the inlet of the particles sensor.
• Do not place anything(coffee, flower vase or drinks etc.) on top
of the appliance.
• Do not install and use broken parts.
• Do not put foreign substances into the product when the
product cover is kept open.
• If you do not use the product for a long period of time, remove
the charging cable from the product.
• Do not ride on the product, or let the product topple by
excessive force.
• Do not use the product for any purpose other than the
intended air purifier.
• Protect the product from foreign substances such as water,
coffee and beverage.
Children in the Household
• This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities,
or lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of the
appliance by a person responsible for their safety. Children
should be supervised to ensure that they do not play with the
appliance.
Charging the battery
NOTE
Getting started
This product has a built-in battery. Use the product after
connecting the AC adapter and charging the battery fully.
• The remaining battery capacity cannot be checked during
charging.
Press the Start/Stop button to start the operation.
• If the air purifier is connected to a smart device, you can check
the battery status through the ‘Puricare Mini’ app.
It may be different from actual remaining battery level.
Operation
• Do not clean with strong detergents of solvent types, but use
soft cloth.
• Be careful not to allow any part of your body to be pinched
when you detach and reattach parts of the appliance.
• Do not install the appliance near curtains which could block the
air inlet or outlet.
• Do not drop or impact the appliance.
• Do not apply excessive force to the product button to press it.
• Do not place the appliance under bright light.
• Fully charge the battery if you wish to use it again after leaving
it for a long period of time.
• When you visit an LG Electronics service centre due to a
battery problem, bring your product charger.
Appliance Overview
Adjusting the Fan Speed
1. Connect the USB cable to the AC adapter.
Front View
3. Connect the power plug to the power outlet.
③
• Charging the battery may be stopped for safety if the
temperature of the battery is excessively high or low.
USB cable
PuriCare Mini
Filter
Owner's Manual
NOTE
the back of the product and
separate it by pulling it slightly.
• The battery, which is not fully charged, is shipped from the
factory. Fully charge the battery before using the product for
the first time.
from the filter and install it
with the side where the handle
is attached facing up.
• Dispose of the packing materials (vinyl, styrofoam etc.) to keep
them out of reach of children.
3 Fix the bottom of the filter cover to
the product and close the cover.
Charging status
Green / On
Charging completed
Red / On
Charging in progress
Installation
Checking the battery status
• If the product is installed in a place with vibration or
unevenness, it may cause loud product noise or vibration.
• Do not install the product on an uneven or inclined surface.
• When using in a car, please firmly fix it to the cup holder that
matches the product size.
If the remaining battery level is below 15%, the power indicator
lamp will blink.
! CAUTION
5. DC IN 5 V port
Charging can be done using the
USB cable.
6. Filter cover
8. Particles sensor inlet
Air is drawn into the particles
sensor for detecting particles
concentration.
⑧
Colour / Status of power indicator Remaining battery level
Control and status display panel
Green / On
More than 70 %
• Pay attention to filter direction when installing it.
Failure to do so may cause product malfunction and failure.
Orange / On
15 % ~ 70 %
Red / Blink
Below 15 %
• When you start the operation again after stopping it, the
operation will begin with the last selected speed.
• When the operation begins, the light of air quality turns white
during the particles sensor stabilization time (30 seconds).
When stabilization of the particles sensor is completed, the
light of air quality indicates air quality.
Using the Turbo Mode
The product operates powerfully for 30 minutes to purify
indoor air promptly.
⑤
• You can use the Turbo mode by pressing the Speed button
during operation. All lights of Speed turn on when the product
is operating in the Turbo mode.
④
③
②
①
⑥
• You can use the Turbo mode by pressing the Turbo button on
the main screen of the Puricare Mini app.
• When you operate the product in Turbo mode, the product
operates for 30 minutes and then returns to the previous
mode.
1. Start/ Stop button
It is used to turn on or off the product.
• When you press this button for 5 seconds or more while the
product is operating, the product will be turned off
completely. When you store the product for 6 months or
longer, turn off the product completely.
2. Speed button
It allows you to adjust the air flow of the product.
• Pressing it for 3 seconds or more will activate the Bluetooth
pairing mode.
3. Power indicator
• Be sure to remove the filter protective vinyl before using the
product. Failure to do so may cause product malfunction.
• The speed is set to Auto when you first start the operation.
Auto mode controls the fan speed automatically according to
the contamination level of the indoor air.
• You can check the speed from the status display panel.
7. Air inlet
When the AC adapter connected to the power outlet is
connected to this device, the battery charging will begin.
Charging status can be checked by the power indicator lamp.
Colour / Status of power indicator
NOTE
4. Filter cover hook
• The charging and operating time of the product may vary
depending on the operating status of the battery or the
product.
Checking the charging status of the battery
2 Remove the protective vinyl
④
⑤
⑦
Installing the filter
1 Press the hook of the filter cover at
Rear View
⑥
• If the operating hours of the battery drop below a half of those
of the new battery, visit the customer service centre of LG
Electronics for replacing the battery with a new battery.
(Battery replacement is charged after the warranty period.)
2. Light of air quality
The current air quality is indicated
by a color.
• Continuously pressing the button repeats the operation modes
in the sequences of Auto → Low (L) → High (H) → Turbo →
Auto, and so on.
PuriCare Mini
• The operating time is 2 hours based on high (H) and 8 hours
based on low (L) when the battery is fully charged.
• As the battery is a consumable item, the battery runtime will
gradually decrease as time passes.
1. Leather strap
3. Air outlet
Purified air is emitted.
• The charging time is approximately 4 hours.
• The exterior or components of the product may vary depending
on the model.
Disposal
! CAUTION
②
! CAUTION
• When connecting to a vehicle USB port or a PC USB port, the
current may be lower than the outlet, which may slow down the
charge rate or cause product failure.
Components
• The product operates with the built-in battery. Do not remove
or replace the battery by yourself. The battery should only be
replaced by service engineer authorised by LG Electronics.
• Use the battery and the charging accessories approved by LG
Electronics only.
Press the Speed button during operation to adjust the air flow.
①
2. Connect the USB cable to the DC IN 5 V port of this product.
• The AC adapter should be purchased separately. It is
recommended to use an AC adapter (5 V, 1.8 A) approved by
LG Electronics. Using an unapproved charger may cause risk of
failure and variation in the charging time.
UNPACKING
Portable air purifier
OPERATION
The adapter is
sold separately.
Battery
! WARNING
To reduce the risk of explosion, fire, death, electric shock, injury
or scalding to persons when using this product, follow basic
precautions, including the following:
• Do not leave the product at a place of excessively high or low
temperature.
• Do not place the appliance near a TV, a stereo equipment an
electronic device in the vehicle.
4. Light of Bluetooth
It turns on when the Bluetooth function is activated.
5. Light of speed
6. Light of air quality
Checking the Air Quality
You can check the air quality through the light of air quality.
The light of air quality indicates the level of air quality in 4
colours, green, yellow, orange and red, based on concentration
of the particles.
The concentration of the particles can be checked using the
Puricare Mini app.
Model
NOTE
• If the concentration of the particles is kept high even after
changing the operation environment, visit your customer
service centre to clean the particles sensor.
Overall
Air Quality
Color
State
Concentration of the particles
(μg/m3)
PM1.0
PM10
PM2.5 (particles with
(coarse
(fine
a diameter
particles) particles) between 1.0
and 2.5 µm)
56 or
more
56 or
more
Orange Unhealthy 155-254
36-55
36-55
Yellow Moderate
13-35
13-35
Red
Green
Bluetooth Module Specifications
255 or
more
Poor
Good
55-154
54 or less 12 or less
12 or less
Using the air quality monitoring function
LCB-001
Replacing the filter
Use the following functions through the smartphone connected
with this product.
1. Remove the cover and replace the filter.
1. You can start/stop the product.
Frequency Range
Output Power (Max)
2 402 MHz ­ 2 480 MHz
7.33 dBm
Wireless function S/W version : V 1.0
Open Source Software Notice Information
To obtain the source code under GPL, LGPL, MPL, and other open
source licenses, that is contained in this product, please visit
http://opensource.lge.com. In addition to the source code, all
referred license terms, warranty disclaimers and copyright
notices are available for download.
LG Electronics will also provide open source code to you on
CD-ROM for a charge covering the cost of performing such
distribution (such as the cost of media, shipping, and handling)
upon email request to opensource@lge.com. This offer is valid
for a period of three years after our last shipment of this
product. This offer is valid to anyone in receipt of this
information.
2. You can adjust the Speed to 7 levels manually.
3. You can adjust purifying mode to Auto/Manual/Turbo mode.
4. You can check current air conditions, and the concentration of
the particles by numeric value.
5. You can set the air quality monitoring.
6. You can check the history of contamination levels.
7. You can manage the filter (service life and replacement cycle).
Pairing
- Turns On with Product
Pairing is a process of mutual registration of Bluetooth devices.
Once pairing is complete, no further pairing is required.
• The concentration of particles could be affected by cooking or
using humidifiers, sprays or other products which generate
steam or fine particles.
• Even two products placed in the same space could measure
the concentration of particles differently due to air circulation.
• The concentration of the particles displayed may change with
environmental factors such as the presence of sofas, beds,
carpets, vacuum cleaners, humidity, smoke, bugs, pets or
cooking oils.
• The PM concentration may be affected by changes in the
outside environment such as construction, heavy traffic or
pollen.
• The concentration of the particles could be higher near outside
doors, windows, vents or in areas where outside air enters. Air
flow near the particles sensor may interrupt normal operation
of the particles sensor and indicated concentration may be
different from actual particles concentration, accordingly.
• Be careful as the battery may be discharged rapidly when the
air quality monitoring function is used.
• PM (particulate matter) concentration is displayed in
increments of 1 unit, from 8 to 999. PM concentration values
are based on the data sheet provided by the sensor
manufacturer.
• The PM concentration measurement was tested using LG
Electronics’ standard test materials.
SMART FUNCTIONS
Using the Puricare Mini Bluetooth app
You can use the product more conveniently by installing
the Puricare Mini Bluetooth app on your smartphone.
Installing the Puricare Mini app
Search for and install PuriCare Mini app from Google
Play or the Apple App store on your smartphone. Refer to
help in the application for detailed instructions.
• Press the 'Filter Replacement' button on the filter
management menu in the Puricare Mini app to cancel the
notice. When the filter replacement notice is cancelled, the
replacement notice time and the remaining filter level will be
initialized.
Cleaning the product exterior
1. Remove dust from the air
inlet and outlet using a
vacuum cleaner.
8. You can turn on and off the product automatically.
Refer to help in the application for detailed functions.
2. Wipe the exterior with soft
cloth.
! WARNING
1. Execute the Puricare Mini app on the smartphone and press
the Start Registration button.
Allergen
filter
5. When the Bluetooth connection between this app and the
product is established, the Bluetooth indicator lamp on the
product will turn on.
6. If pairing with the smartphone is not established within 3
minutes, the Bluetooth indicator lamp will turn off.
NOTE
• When connecting the product with your smartphone, use
the product as close as possible. In any of the following
cases, the Bluetooth function may not work properly even
at close range.
- If there is an obstacle or a person between the product and
the smartphone
- If a device that uses the same frequency with the Bluetooth
such as a medical device, microwave oven or wireless LAN is
near the product and the smartphone, the pairing may fail due
to interference from other radio waves.
• The Bluetooth function may not operate depending on the
Replacement
frequency
Ultra-fine filter
If contaminated,
Ultra-fine clean the ultra-fine
filter
filter with a vacuum
3. After confirming that the Bluetooth indicator lamp of the
product blinks, begin pairing.
4. Select a product to register from the app screen on your
smartphone.
Cleaning frequency
6 months
cleaner or soft brush
(monthly).
• The operating environment and operation hours may affect the
replacement frequency.
• Noise may occur if the filter is contaminated.
• If it is necessary to replace the filter, contact a nearby service
centre.
• A filter is a consumable item. Therefore you must buy a new
one for replacement when it has reached the end of its lifespan
even during the warranty period. Contact the LG Electronics
service centre or consumables shop on the LG Electronics site
(www.lg.com).
stand-by mode, allowing you to operate the product through
the connected smartphone.
• If the distance between the product and the smartphone
increases, the Bluetooth connection will be disconnected.
• The Bluetooth connection status of this product can be
checked through the Bluetooth indicator lamp ON/OFF on the
product. (When the connection is established, the Bluetooth
indicator lamp will turn on.)
• When you use multiple products connected on a single mobile
phone, you can select the desired product by scrolling through
the screen from the left to the right.
• It is recommended to use the PuriCare Mini app on Android
version 8.0 or higher.
If the appliance is not used for a long period of time, store it in a
shaded and dry place.
1. Operate the product for one hour or more on a fine day.
This removes the moisture and prevents molds from building
up inside the product.
2. Separate the charging cable from the product which is
operating and turn off the product completely by pressing the
power button for at least 5 seconds.
3. Package the appliance to prevent the dust or foreign
substance from entering the appliance. Store the packaged
appliance at a shaded place.
! CAUTION
Cleaning the ultra-fine filter
2. Remove dust from the ultra-fine
filter with a vacuum cleaner or a
soft brush.
Ultra-fine
filter
specifications of the smartphone.
• Even if you turn off the product, the product will enter the
! CAUTION
• Do not wipe the appliance surface using sulfuric acid,
hydrochloric acid or organic solvent (thinner, kerosene etc.) or
attach a sticker on the appliance.
• Do not allow the water enter inside the appliance.
Storage
NOTE
1. Remove the filter cover from the
product.
Symptoms
The appliance
does not
operate.
Solution
• Charge the battery.
• Make sure that the ambient temperature is not
excessively high or low.
• Use an adapter of 1.8 A or higher.
Fan is noisy even
• Thoroughly clean the ultra-fine filter.
on the lowest
• Replace the filter.
speed.
• Ventilate the indoor air before you use the product.
• Clean the ultra-fine filter properly.
• Replace the filter.
The indoor air is
• Use a product that fits the size of the room.
not purified well
• Avoid a well-ventilated place such as a gate, window,
enough.
etc.
• Remove the obstacle.
• Move the appliance and install it again.
The
concentration of In a closed space, the cleanliness level may continue to
particles may
stay the same without change.
not change.
• Make sure to stop battery charging and product operation
before cleaning and replacing the filter.
• Do not spray water directly on the appliance.
Component
TROUBLESHOOTING
• If the amount of particles is more than the capacity of
The light of air
the product, the display may not change.
quality continues • Turn the product off and on by pressing the Start/Stop
to stay red.
button.
• Do not use spray near the product.
MAINTENANCE
2. Press the Speed button on the product for 3 seconds or more.
NOTE
2. Once you have replaced the filter, disable the filter
replacement alert.
Scheduled maintenance
You can execute the Puricare Mini app and set the time to turn
on the particles sensor through the product management menu.
- Always On: Monitor the air quality even when product
operation is suspended
Bluetooth function
NOTE
• Do not store the appliance on the dashboard of a vehicle. Doing
so may cause explosion, fire or performance degradation as
direct sunlight may increase temperature.
NOTE
• Do not store the appliance at a humid place or at a place
exposed to the direct sunlight.
The
concentration of In an environment or open space where outside air is
particles
supplied continuously, the concentration may continue to
continues to
remain high.
remain high.
• In a place with a lot of smoke or odour, the air cleaning
A strange odour
function may deteriorate. Ventilate the room first and
comes out from
then use the product.
the air outlet as
• Replace the filter. The filter replacement frequency may
well as the filter.
differ depending on the usage environment.
• Shut down the Bluetooth setting on the smartphone,
and then try again.
• Make sure that the Bluetooth setting is turned on.
Bluetooth pairing • Keep clear of obstacles between the product and the
cannot be done. smart phone.
• Depending on the type of smartphone or the
surrounding environment, Bluetooth pairing may not
work well.
PRODUCT SPECIFICATIONS
Appearance and specifications may vary without notice to
improve the quality of the appliance.
Power
Rated power
consumption
• If you keep the product unused for an extended period of time,
you should fully charge the battery every 6 months.
• Be careful not to damage the ultra-fine filter when you use a
vacuum cleaner.
• If you keep the product unused for an extended period time
with the battery not fully charged, the battery may fail.
12 W
Exterior dimensions
69 mm x 64 mm x 200 mm
(W*D*H)
Service temperature 5~40 °C
Service humidity 70 % or less
• Fully charge the battery if you wish to use it again after leaving
it for a long period of time.
• Do not wash the filter with water.
Product
5V
1.8 A (AC adapter)
Built-in rechargeable battery
Battery
(Typ) 3 600 mAh, 13.32 Wh
Capacity
(Min) 3 500 mAh, 12.95 Wh
“The Bluetooth® word mark and logos are registered trademarks
owned by Bluetooth SIG, Inc. and any use of such marks by LG
Electronics Inc. is under license. Other trademarks and trade names
are those of their respective owners.”
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising