LG | 32LT661HBZA | User guide | LG 32LT661HBZA Benutzerhandbuch

LG 32LT661HBZA Benutzerhandbuch
OWNER’S MANUAL
RS-232C
LED TV*
* LG LED TV applies LCD screen with LED backlights.
Please read this manual carefully before operating your set and retain it
for future reference.
www.lg.com
IR CODES
•• This feature is not available for all models.
ENGLISH
Code (Hexa)
08
Function
(POWER)
95
AF
0B
F0
10-19
2
Number Key 0-9
Alphabet buttons
(SPACE)
Note
Remote control Button
(Power On/Off)
Remote control Button
Remote control Button
Remote control Button
Remote control Button
Remote control Button
53
1A
02
03
7C
B5
09
Remote control Button
Remote control Button
Remote control Button
Remote control Button
Remote control Button
Remote control Button
Remote control Button
00
Remote control Button
01
Remote control Button
AB
0C
AA
40
41
Remote control Button
Remote control Button
Remote control Button
Remote control Button
Remote control Button
07
Remote control Button
06
Remote control Button
Code (Hexa)
(BACK)
Note
Remote control Button
Remote control Button
Remote control Button
Remote control Button
72
Remote control Button
71
Remote control Button
63
Remote control Button
61
Remote control Button
20
21
39
B1
B0
BA
8F
Remote control Button
Remote control Button
Remote control Button
Remote control Button
Remote control Button
Remote control Button
Remote control Button
8E
Remote control Button
DC
Remote control Button
9F
91
E8
Remote control Button
Remote control Button
Remote control Button
ENGLISH
44
43
28
5B
Function
3
EXTERNAL CONTROL DEVICE SETUP
ENGLISH
RS-232C Setup
•• Image shown may differ from your TV.
Connect the RS-232C (serial port) input jack to an external control
device (such as a computer or an A/V control system) to control the
product’s functions externally.
Connect the serial port of the control device to the RS-232C jack on the
product back panel.
•• RS-232C connection cables are not supplied with the product.
Phone jack Type
(Depending on model)
•• You need to purchase the phone-jack to RS-232C cable required for
the connection between the PC and the TV, which is specified in the
manual.
** For other models, connect to the USB port.
** The connection interface may differ from your TV.
(PC)
RS-232C IN
(CONTROL & SERVICE)
RS-232C IN
(CONTROL & SERVICE)
(*Not Provided)
(TV)
Type of Connector : D-Sub 9-Pin Male
1
5
(Depending on model)
6
No.
Pin name
2
3.5 V
RXD (Receive data)
3
TXD (Transmit data)
4
IR OUT from TV
5
GND
6
No Connection
7
No Connection (5 V available in some models)
8
No Connection
9
No Connection (12 V available in some models)
1
4
9
RS-232C Configurations
Command Reference List
(Depending on model)
7-Wire Configurations
(Standard RS-232C cable)
TV
3
2
5
6
4
8
7
TXD
RXD
GND
DSR
DTR
CTS
RTS
3-Wire Configurations
(Not standard)
RXD
TXD
GND
DTR
DSR
RTS
CTS
PC
2
3
5
4
6
7
8
Communication Parameters
••
••
••
••
••
••
Baud rate: 9,600 bps (UART)
Data length: 8 bits
Parity: None
Stop bit: 1 bit
Communication code: ASCII code
Use a crossed (reverse) cable.
TV
3
2
5
6
4
8
7
TXD
RXD
GND
DSR
DTR
RTS
CTS
Data
(Hexadecimal)
1 Power
k
a
00 to 01
2 [Aspect Ratio]
k
c
(See p. 6)
3 Screen Mute
k
d
(See p. 7)
4 Volume Mute
k
e
00 to 01
5 Volume
Control
k
f
00 to 64
6 [Contrast]
k
g
00 to 64
7 [Brightness]
k
h
00 to 64
8 [Colour]
k
i
00 to 64
9 [Tint]
k
j
00 to 64
10 [Sharpness]
k
k
00 to 32
11 OSD Select
k
l
00 to 01
12 Remote
Control Lock
Mode
k
m
00 to 01
13 [Balance]
k
t
00 to 64
14 [Colour
Temperature]
x
u
00 to 64
15 [Energy
Saving]
j
q
(See p. 9)
16 [Auto
Configuration]
j
u
01
17 [Equalizer]
j
v
(See p. 9)
18 Tune
Command
m
a
(See p. 10)
19 Programme
[Skip] / [Add]
m
b
00 to 01
20 Key
m
c
(See p. 10)
21 Control
[Backlight]
m
g
00 to 64
22 [Input] select
x
b
(See p. 11)
•• During USB operations such as DivX or EMF, all commands except
Power(ka) and Key(mc) are not executed and treated as NG.
5
ENGLISH
RXD
TXD
GND
DTR
DSR
RTS
CTS
PC
2
3
5
4
6
7
8
Command1 Command2
Transmission / Receiving Protocol
(Depending on Model)
ENGLISH
Transmission
(Command1)(Command2)( )([Set ID])( )([Data])(Cr)
(Command1) : First command to control the TV. (j, k, m or x)
(Command2) : Second command to control the TV.
([Set ID]) : You can adjust the set ID to choose desired monitor ID
number in option menu. Adjustment range is 1 to 99. When selecting
Set ID ‘0’, every connected set is controlled. Set ID is indicated as
decimal (1 to 99) on menu and as Hexa decimal (0 x 0 to 0 x 63) on
transmission/receiving protocol.
([Data]) : To transmit command data. Transmit ‘FF’ data to read status
of command.
(Cr) : Carriage Return
ASCII code ‘0 x 0D’
( ) : ASCII code ‘space (0 x 20)’
OK Acknowledgement
(Command2)( )([Set ID])( )(OK)([Data])(x)
** The set transmits ACK (acknowledgement) based on this format
when receiving normal data. At this time, if the data is data read
mode, it indicates present status data. If the data is data write
mode, it returns the data of the PC computer.
Error Acknowledgement
(Command2)( )([Set ID])( )(NG)([Data])(x)
** The set transmits ACK (acknowledgement) based on this format
when receiving abnormal data from non-viable functions or
communication errors.
[Data] 00 : Illegal Code
1 Power (Command: k a)
►To
► control Power On/Off of the set.
Transmission
(k)(a)( )([Set ID])( )([Data])(Cr)
[Data] 00 : [Off]
[Data] 01 : [On]
Ack
(a)( )([Set ID])( )(OK/NG)([Data])(x)
►To
► Show TV is Power On/Off.
Transmission
(k)(a)( )([Set ID])( )(FF)(Cr)
Ack
(a)( )([Set ID])( )(OK/NG)([Data])(x)
** Similarly, if other functions transmit ‘0 x FF’ data based on this
format, Acknowledgement data feed back presents status about
each function.
** OK Ack., Error Ack. and other message may display on the screen
when TV is power On.
2 [Aspect Ratio] (Command: k c) (Main Picture Size)
►To
► adjust the screen format. (Main picture format) You can also
adjust the screen format using the picture settings.
Transmission
(k)(c)( )([Set ID])( )([Data])(Cr)
[Data] 01 : [ 4:3] (Normal screen - [Just Scan] Off)
[Data] 02 : [ 16:9] (Wide screen - [Just Scan] Off)
[Data] 06 : [ Original] ([Just Scan] Off)
[Data] 09 : [ Just Scan]
** Please make sure that the model doesn't support both Vertical Zoom
and All-Direction Zoom mode.
Ack
(c)( )([Set ID])( )(OK/NG)([Data])(x)
** Using the PC input, you select either 16:9 or 4:3 screen aspect ratio.
6
3 Screen Mute (Command: k d)
6 [Contrast] (Command: k g)
►To
► select screen mute on/off.
►To
► adjust screen contrast.
You can also adjust contrast in the picture settings.
Transmission
Transmission
(k)(g)( )([Set ID])( )([Data])(Cr)
[Data] 00 : Screen mute off (Picture on) / Video mute off
[Data] 01 : Screen mute on (Picture off)
[Data] 10 : Video mute on
Data Min : 00 to Max : 64
** Refer to "Real data mapping".
Ack
Ack
(d)( )([Set ID])( )(OK/NG)([Data])(x)
** In case of video mute on only, TV will display On Screen Display
(OSD). But, in case of Screen mute on, TV will not display OSD.
4 Volume Mute (Command: k e)
►To
► control volume mute on/off.
You can also adjust mute using the mute button on remote control.
Transmission
(k)(e)( )([Set ID])( )([Data])(Cr)
[Data] 00 : Volume mute on (Volume off)
[Data] 01 : Volume mute off (Volume on)
ENGLISH
(k)(d)( )([Set ID])( )([Data])(Cr)
(g)( )([Set ID])( )(OK/NG)([Data])(x)
7 [Brightness] (Command: k h)
►To
► adjust screen brightness.
You can also adjust brightness in the picture settings.
Transmission
(k)(h)( )([Set ID])( )([Data])(Cr)
Data Min : 00 to Max : 64
** Refer to "Real data mapping".
Ack
(h)( )([Set ID])( )(OK/NG)([Data])(x)
Ack
(e)( )([Set ID])( )(OK/NG)([Data])(x)
5 Volume Control (Command: k f)
8 [Colour] (Command: k i)
►To
► adjust the screen colour.
You can also adjust colour in the picture settings.
►To
► adjust volume.
You can also adjust volume with the volume buttons on remote
control.
Transmission
Transmission
[Data] Min : 00 to Max : 64
** Refer to "Real data mapping".
(k)(f)( )([Set ID])( )([Data])(Cr)
[Data] Min : 00 to Max : 64
** Refer to "Real data mapping".
(k)(i)( )([Set ID])( )([Data])(Cr)
Ack
(i)( )([Set ID])( )(OK/NG)([Data])(x)
Ack
(f)( )([Set ID])( )(OK/NG)([Data])(x)
7
9 [Tint] (Command: k j)
12 Remote Control Lock Mode (Command: k m)
►To
► adjust the screen tint.
You can also adjust tint in the picture settings.
►To
► lock the front panel controls on the monitor and remote control.
ENGLISH
Transmission
(k)(j)( )([Set ID])( )([Data])(Cr)
[Data] Red : 00 to Green : 64
** Refer to "Real data mapping".
Ack
(j)( )([Set ID])( )(OK/NG)([Data])(x)
10 [Sharpness] (Command: k k)
►To
► adjust the screen sharpness.
You can also adjust sharpness in the picture settings.
Transmission
(k)(k)( )([Set ID])( )([Data])(Cr)
[Data] Min : 00 to Max : 32
** Refer to "Real data mapping".
Ack
(k)( )([Set ID])( )(OK/NG)([Data])(x)
11 OSD Select (Command: k l)
►To
► select OSD (On Screen Display) on/off when controlling remotely.
Transmission
(k)(l)( )([Set ID])( )([Data])(Cr)
[Data] 00 : [Off]
[Data] 01 : [On]
Ack
(l)( )([Set ID])( )(OK/NG)([Data])(x)
Transmission
(k)(m)( )([Set ID])( )([Data])(Cr)
[Data] 00 : [Off]
[Data] 01 : [On]
Ack
(m)( )([Set ID])( )(OK/NG)([Data])(x)
** If you are not using the remote control, use this mode. When main
power is on/off, external control lock is released.
** In the standby mode, if key lock is on, TV will not turn on by power
on key of IR & Local Key.
13 [Balance] (Command: k t)
►To
► adjust balance.
You can also adjust balance in the audio settings.
Transmission
(k)(t)( )([Set ID])( )([Data])(Cr)
[Data] L : 00 to R : 64
** Refer to "Real data mapping".
Ack
(t)( )([Set ID])( )(OK/NG)([Data])(x)
14 [Colour Temperature] (Command: x u)
►To
► adjust Colour Temperature. You can also adjust Colour
Temperature in the picture settings.
Transmission
(x)(u)( )([Set ID])( )([Data])(Cr)
[Data] Warm: 00 to Cool:64
** Refer to "Real data mapping".
Ack
(u)( )([Set ID])( )(OK/NG)([Data])(x)
8
15 [Energy Saving] (Command: j q)
17 [Equalizer] (Command : j v)
►To
► reduce the power consumption of the TV. You can also adjust
Energy Saving in picture settings.
►To
► adjust equalizer.
Transmission
Transmission
ENGLISH
(j)(v)( )([Set ID])( )([Data])(Cr)
(j)(q)( )([Set ID])( )([Data])(Cr)
Power Saving
Function
7 6 5 4
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
MSB
Level
Low
Power
Low
Power
Low
Power
Low
Power
Low
Power
Low
Power
0
Description
3
2
1
0
0
0
0
0
[Off]
0
0
0
1
[Minimum]
0
0
1
0
[Medium]
0
0
1
1
[Maximum]
LSB
0
0
0
0
1
0
1
[Screen Off]
0
1
0
0
[Auto]
►[Auto]
►
is available in TV that supports ‘Intelligent Sensor’.
0
0
0
Data
Frequency
7 6 5
0
Frequency
4 3 2 1 0
Step
0 0 0
1st Band
0 0 0 0 0
0 (decimal)
0 0 1
2nd Band
0 0 0 0 1
1 (decimal)
0 1 0
3rd Band
... ... ... ... ...
...
0 1 1
4th Band
1 0 0 1 1
19 (decimal)
1 0 0
5th Band
1 0 1 0 0
20 (decimal)
Ack
(v)( )([Set ID])( )(OK/NG)([Data])(x)
Ack
(q)( )([Set ID])( )(OK/NG)([Data])(x)
16 [Auto Configuration] (Command: j u) (Only RGB support model)
►To
► adjust picture position and minimize image shaking
automatically. It works only in RGB (PC) mode.
Transmission
(j)(u)( )([Set ID])( )([Data])(Cr)
[Data] 01 : To set
Ack
(u)( )([Set ID])( )(OK/NG)([Data])(x)
9
18 Tune Command (Command: m a)
19 Programme [Skip] / [Add] (Command: m b)
►Select
►
channel to following physical number.
►To
► set skip status for the current Programme.
Transmission
Transmission
ENGLISH
(m)(a)( )([Set ID])( )([Data] 00)( )([Data] 01)( )([Data] 02)(Cr)
[Data] 00 : High channel data
[Data] 01 : Low channel data
ex. No. 47 00 2F (2FH)
No. 394 01 8A (18AH),
DTV No. 0 Don’t care
[Data] 02 : (Antenna)
0 x 00 : Analogue Main
0 x 10 : DTV Main
0 x 20 : Radio
(Cable)
0 x 80 : Analogue Main
0 x 90 : DTV Main
0 x A0 : Radio
(Satellite)
0 x 40 : DTV Main
0 x 50 : Radio Main
Channel data range
Min : 00 Max : 270F (0 to 9999)
Ack
(a)( )([Set ID])( )(OK/NG)([Data])(x)
(m)(b)( )([Set ID])( )([Data])(Cr)
[Data] 00 : [Skip]
[Data] 01 : [Add]
Ack
(b)( )([Set ID])( )(OK/NG)([Data])(x)
20 Key (Command: m c)
►To
► send IR remote key code.
Transmission
(m)(c)( )([Set ID])( )([Data])(Cr)
[Data]
IR CODES
Ack
(c)( )([Set ID])( )(OK/NG)([Data])(x)
21 Control [Backlight] (Command: m g)
►To
► control the backlight.
Transmission
(m)(g)( )([Set ID])( )([Data])(Cr)
[Data] Min : 00 to Max : 64
Ack
(g)( )([Set ID])( )(OK/NG)([Data])(x)
10
22 [Input] select (Command: x b) (Main Picture Input)
** Real data mapping
00 :
Step 0
►To
► select input source for main picture.
Transmission
[Data]
Structure
MSB
0
LSB
0
0
0
0
External Input
0
0
0
A:
Step 10 ([Set ID] 10)
F:
10 :
Step 15 ([Set ID] 15)
Step 16 ([Set ID] 16)
64 :
Step 100
6E :
Step 110
73 :
74 :
Step 115
Step 116
CF :
Step 199
FE :
FF :
Step 254
Step 255
ENGLISH
(x)(b)( )([Set ID])( )([Data])(Cr)
Input Number
External Input
Data
0
0
0
0
[DTV]
0
0
0
1
[Analogue]
0
0
1
0
[AV]
0
1
0
0
[Component]
0
1
1
0
[RGB]
0
1
1
1
1
0
0
0
1
0
0
1
1
0
1
0
Input Number
[HDMI]
Data
0
0
0
0
Input1
0
0
0
1
Input2
0
0
1
0
Input3
0
0
1
1
Input4
Ack
(b)( )([Set ID])( )(OK/NG)([Data])(x)
11
The model and serial number of the product are
located on the back and on one side of the product.
Record them below in case you ever need service.
Model
Serial no.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising