LG | WK7 | User guide | LG WK7 Benutzerhandbuch

LG WK7 Benutzerhandbuch
ENGLISH
SIMPLE MANUAL
MODEL
WK7
www.lg.com
MFL70405145
1903_Rev01
Copyright © 2019 LG Electronics Inc.
All Rights Reserved.
Safety Information
CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK DO NOT REMOVE COVER
(OR BACK) NO USER-SERVICEABLE PARTS
INSIDE REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
This lightning flash with
arrowhead symbol within an
equilateral triangle is intended to
alert the user to the presence of
uninsulated dangerous voltage within the
product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric
shock to persons.
The exclamation point within an
equilateral triangle is intended to
alert the user to the presence of
important operating and
maintenance (servicing) instructions in the
literature accompanying the product.
2
WARNING:
yy To prevent fire or electric shock
hazard, do not expose this product
to rain or moisture.
y
y Do not install this equipment in a confined
space such as a book case or similar unit.
yy This unit contains magnets which can
be harmful to some kind of object (Ex :
Magnetic card, Pacemaker etc..).
CAUTION:
yy Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
Slots and openings in the cabinet are provided
for ventilation and to ensure reliable operation of
the product and to protect it from over heating.
The openings should never be blocked by
placing the product on a bed, sofa, rug or other
similar surface. This product shall not be placed
in a built-in installation such as a bookcase or
rack unless proper ventilation is provided or the
manufacturer’s instruction has been adhered to.
yy The apparatus should not be exposed
to water (dripping or splashing) and no
objects filled with liquids, such as vases,
should be placed on the apparatus.
y
y No naked flame sources, such as
lighted candles, should be placed on the
apparatus.
y
y To avoid fire or electric shock, do not open
the unit. contact to qualified personnel only.
yy Do not leave the unit in a place near the
heating appliances or subject to direct
sunlight, moisture, or mechanical shock.
yy The Power Plug is the disconnecting
device. In case of an emergency, the
Power Plug must remain readily
accessible.
yy To clean the unit, use a soft, dry cloth. If
the surfaces are extremely dirty, use a
soft cloth lightly moistened with a mild
detergent solution. Do not use strong
solvents such as alcohol, benzine, or
thinner, as these might damage the
surface of the unit.
yy Do not use volatile liquids such as
insecticide spray near the unit. Wiping
with strong pressure may damage the
surface. Do not leave rubber or plastic
products in contact with the unit for a
long period of time.
yy Do not place the unit over the vehicle’s
air bag. When the air bag deploys, it may
result in injury. Before using in the car, fix
the unit.
yy Do not use the handsfree function during
driving a car.
yy Do not leave the unit on an unstable
place such as high shelves. it may fall
down because of the vibration of the
sound.
yy Do not use high voltage products around this
product. (ex. Electrical swatter) This product
may malfunction due to electrical shock.
3
CAUTION when using this product in
environments of low humidity.
yy It may cause static electricity in environments
of low humidity.
yy It is recommended to use this product after
touching any metal object which conducts
electricity.
NOTICE: For safety marking information
including product identification and supply
ratings, please refer to the main label on the
bottom or the other surface of the product.
4
CAUTION: Only use the AC adapter supplied
with this device. Do not use a power supply
from another device or another manufacturer.
Using any other power cable or power supply
may cause damage to the device and void your
warranty.
Declaration of Conformity
Hereby, LG Electronics declares that the
radio equipment type LG ThinQ speaker is in
compliance with Directive 2014/53/EU. The
full text of the EU declaration of conformity
is available at the following internet address:
For consideration of the user, this device
should be installed and operated with a
minimum distance of 20 cm between the
device and the body.
Frequency range
Output power (Max.)
2402 to 2480 MHz 10 dBm
2412 to 2472 MHz 20 dBm
5180 to 5240 MHz 20 dBm
http://www.lg.com/global/support/cedoc/cedoc#
The use of the 5150 – 5350 MHz band is
restricted to indoor use only. This restriction
exists in the countries Belgium (BE), Bulgaria
(BG), Czech Republic (CZ), Denmark (DK),
Germany (DE), Estonia (EE), Ireland (IE),
Greece (EL), Spain (ES), France (FR), Croatia
(HR), Italy (IT), Cyprus (CY), Latvia (LV),
Lithuania (LT), Luxembourg (LU), Hungary
(HU), Malta (MT), Netherlands (NL), Austria
(AT), Poland (PL), Portugal (PT), Romania
(RO), Slovenia (SI), Slovakia (SK), Finland
(FI), Sweden (SE), United Kingdom (UK),
Switzerland (CH), Iceland (IS), Liechtenstein
(LI) and Norway(NO).
5
Symbols
Refers to alternating current (AC).
0
Refers to direct current (DC).
Refers to class II equipment.
Disposal of your old appliance
1. This crossed-out wheeled bin symbol indicates
that waste electrical and electronic products
(WEEE) should be disposed of separately from
the municipal waste stream.
2. Old electrical products can contain hazardous
substances so correct disposal of your old
appliance will help prevent potential negative
consequences for the environment and human
health. Your old appliance may contain reusable
parts that could be used to repair other
products, and other valuable materials that can
be recycled to conserve limited resources.
3. You can take your appliance either to the shop
where you purchased the product, or contact
your local government waste office for details
of your nearest authorised WEEE collection
point. For the most up to date information for
your country please see www.lg.com/global/
recycling
6
1
!
Refers to stand-by.
Refers to “ON” (power).
Refers to dangerous voltage.
OPEN SOURCE
SOFTWARE NOTICE
INFORMATION
To obtain the source code under GPL, LGPL,
MPL, and other open source licenses, that is
contained in this product, please visit
http://opensource.lge.com.
In addition to the source code, all referred
license terms, warranty disclaimers and
copyright notices are available for download.
LG Electronics will also provide open source
code to you on CDROM for a charge covering
the cost of performing such distribution (such
as the cost of media, shipping and handling)
upon email request to opensource@lge.
com. This offer is valid for a period of three
years after our last shipment of this product.
This offer is valid to anyone in receipt of this
information.
Disclaimers
yy Google, Google Home, Google Play,
Chromecast built-in and other related marks
and logos are trademarks of Google LLC.
yy Google Assistant requires an internet/data
connection. Data rates may apply.
yy The Google Assistant is not available in
certain languages and countries.
yy Subscriptions may be required, and additional
terms, conditions and/or charges may apply.
yy Controlling certain devices and features
in your home requires a compatible smart
device.
7
Set up
Step 1. Connect the AC
adapter
After connecting the AC adapter, the
speaker starts booting. Then Function
LED rotates for 10 seconds (Approx. 30
~ 50 seconds) during booting.
8
Step 2. Install "Google
Home" App
Step 3. Set up the
Wi-Fi connection with app
Download the Google Home App from
the Google Play or App Store.
a Connect your smart device to the
Wi-Fi network that you’ll use for
your speaker.
Google Home
NOTE
In case of iOS devices, it should be
turned on Bluetooth setting on your
smart device.
b Launch the “Google Home” app.
NOTE
The speaker is not compatible with the
“Smart ThinQ” app. So it can not be
used for setup or for control by using
the “Smart ThinQ” app.
9
c Follow the steps for Wi-Fi
connection on the app.
NOTE
You will need a Google account to use
this app.
d When successfully connected Wi-Fi,
blinking Function LED will be solid
white.
10
NOTE
yy For more information (Set up,
Usage, Help etc.), research “Google
Assistant Help” or visit the web
site. https://support.google.com/
assistant This public site is provided
for devices that work with Google
Assistant.
yy The speaker is not available to
use some function from “Google
Assistant Help” site. (ex. Call etc.)
yy “Google Home” app is provided by
Google. It might be revised by a
change of Google Policy.
How to Use
"Google Assistant"
Case 2. Long press the
2 seconds.
for
Make sure the speaker is connected to
Wi-Fi. (Page 8-10)
Case 1. Say "Ok Google"
Ok Google
NOTE
If you have any trouble or question
about Google Assistant, please suggest
by saying “OK Google, Feedback”.
It would be helpful for improving
Google Services.
11
NOTE
Voice command
yy Plan your day
“Tell me about my day.”
“What’s my next meeting?”
“Set a reminder to check schedule at
6pm.”
yy Weather
“What’s the weather?”
“What’s the weather like tomorrow?”
“What’s the weather like in Cardiff?”
yy Music
“Play the music.” “Next song.”
“Previous song.” “Pause the music”
yy Availability
“How many calories in a pie?”
“How do I get to Paddington Station?”
“How do you say hello in Korean?”
12
yy Internet
“What movies are showing this weekend?”
“Why is the sky blue?”
“What is the smallest country in Europe?”
“How much sugar is there in a Coke?”
yy Smart Home
“Turn up the thermostat.”
“Set the thermostat to 22 degrees”
“Dim the lights in the kitchen.”
“Is the light on in the living room?”
For more information on the voice
commands, refer to the “Google Home”
app screen or visit the web site.
https://support.google.com/assistant
Additional
Download “LG Wi-Fi Speaker”
Comfortable Function
“LG Wi-Fi Speaker” app is provided
by LG electronics. This App provides
more features (Sound effect etc.) on
the speaker. To Enjoy it, download “LG
Wi-Fi Speaker” app on the App Store or
Google Play.
With the Google Assistant built in, you
can control compatible smart home
devices such as TV’s, lights, switches,
plugs, thermostats and more by simply
using your voice.
NOTE
For more information, visit the below
web site.
yy Set up, Usage and more: https://
support.google.com/assistant
yy Compatible LG appliance models:
Visit http://www.lg.com and then
search the information
Sound effect
This system has a number of pre-set
surround sound fields. You can select a
desired sound mode by using “LG Wi-Fi
Speaker” app.
13
Bluetooth
Connection
Step 1. Connect the Wi-Fi
Make sure the speaker connects to
Wi-Fi by using “Google Home” app
(Page 8-10).
NOTE
The Bluetooth connection may not
work properly before connecting
to Wi-Fi.
14
Step 2. Change Function
Tap the Button to change functions.
Function LED will be blinking in blue.
Step 3. Find and Select your
speaker name
Select speaker name that is set on
“Google Home” app from phone’s
smart device list. When successfully
connected Bluetooth, Function LED will
be solid blue.
Function LED
White color: Wi-Fi
Blink
Solid
Ready for Wi-Fi connection.
Connected Wi-Fi.
Blue color: Bluetooth
Speaker
name
Blink
Solid
Search for Bluetooth
device.
Paired Bluetooth device.
NOTE
When operation of speaker is
completed, Function LED is off after 3
seconds.
15
Basic Operation
Microphone
Google Assistant
LED
Function LED
Microphone Button
Wi-Fi / Bluetooth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Play / Pause . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tap
Forward Skip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tap
Backward Skip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tap
or
X2
X3
Volume
Volume Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tap
or
Microphone
Enable / Disable Voice recognition . . . . . . . . . . . . . . . . . . . . . . Press ( )
Google
Assistant
Activate (= Ok Google) . . . . . . . . . . . . . . . . Long press for 2 seconds
Stop (ex. Weather, News, Radio etc.) . . . . . . . . . . . . . . . . . . . . . . . Tap
Function
Playback
Controls
16
Tap
Important Notice
Specification
Resetting
To initialize information of existing
connection, follow these instructions.
a P ress and hold RESET button for 5
Power consumption:
-- Refer to the main label.
-- Networked standby : 4.7 W
Dimensions (W x H x D):
-- Approx. 135 mm X 210.7 mm X 135 mm
AC Adapter:
-- Model : LCAP16B-E
-- Manufacturer: Lien Chang Electronic
Enterprise Co., Ltd.
-- Input: 100-240 V~ 50-60 Hz
- Output: 19 V 0 2.1 A
yy Design and specifications are subject to
change without notice.
seconds. The Function LED is filled, during
press RESET.
hen speaker enter reset mode, Function
bW
LED starts to rotate quickly with sound.
Wait until resetting will complete.
(Approx. 1 minute)
c The speaker has completed resetting
when Function LED blinks slowly with
sound.
NOTE
When you reset this speaker, it needs
to reconnect Wi-Fi, Bluetooth.
For more information, download the online owner’s manual. http://www.lg.com
17
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising