LG | T2108VSPM2 | User manual | LG T2108VSPM2 Sách hướng dẫn sử dụng

LG T2108VSPM2 Sách hướng dẫn sử dụng
OWNER’S MANUAL
WASHING MACHINE
Before beginning installation, read these instructions carefully.
This will simplify installation and ensure that the product is
installed correctly and safely. Leave these instructions near the
product after installation for future reference.
EN
ENGLISH
T2108VSPM2
MFL70761329
Rev.01_100719
www.lg.com
Copyright © 2019 LG Electronics Inc. All Rights Reserved
TABLE OF CONTENTS
This manual may contain images or content
that may be different from the model you
purchased.
This manual is subject to revision by the
manufacturer.
SAFETY INSTRUCTIONS...............................................................3
IMPORTANT SAFETY INSTRUCTIONS...........................................................3
INSTALLATION................................................................................8
Parts and Specifications....................................................................................8
Installation Place Requirements........................................................................9
Connecting the Water Inlet Hose.....................................................................10
Installing the Drain Hose.................................................................................. 11
Levelling the Appliance....................................................................................12
OPERATION..................................................................................13
Operation Overview.........................................................................................13
Preparing Laundry...........................................................................................13
Adding Detergents, Softeners and Bleaches...................................................15
Control Panel...................................................................................................17
Washing Programme.......................................................................................18
Option Programme...........................................................................................19
SMART FUNCTIONS.....................................................................21
Using Smart Diagnosis....................................................................................21
MAINTENANCE.............................................................................22
Cleaning after Every Wash..............................................................................22
Cleaning the Appliance Periodically.................................................................22
TROUBLESHOOTING...................................................................24
Before Calling for Service................................................................................24
SAFETY INSTRUCTIONS
EN
The following safety guidelines are intended to prevent unforeseen risks
or damage from unsafe or incorrect operation of the appliance.
The guidelines are separated into ‘WARNING’ and ‘CAUTION’ as
described below.
This symbol is displayed to indicate matters and operations
that can cause risk. Read the part with this symbol carefully
and follow the instructions in order to avoid risk.
WARNING
This indicates that the failure to follow the instructions can cause
serious injury or death.
CAUTION
This indicates that the failure to follow the instructions can cause the
minor injury or damage to the product.
IMPORTANT SAFETY INSTRUCTIONS
WARNING
To reduce the risk of explosion, fire, death, electric shock,
injury or scalding to persons when using this product, follow
basic precautions, including the following:
Technical Safety
•• This appliance is not intended for use by persons (including children)
with reduced physical, sensory or mental capabilities, or lack of
experience and knowledge, unless they have been given supervision
or instruction concerning use of the appliance by a person
responsible for their safety.
•• Children should be supervised to ensure that they do not play with
the appliance.
3
EN
•• If the power cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified persons in order
to avoid a hazard.
•• Use a new hose or hose-set supplied with the appliance. Reusing old
hoses can cause a water leak and subsequent property damage.
•• Ventilation openings must not be obstructed by a carpet.
•• This appliance is intended to be used in household only and not in
applications such as:
-- Staff kitchen areas in shops, offices and other working
environments;
-- Farm houses;
-- By clients in hotels, motels and other residential type environments;
-- Bed and breakfast type environments;
-- Areas for communal use in blocks of flats or in launderettes
•• The inlet water pressure must be between 30 and 800 kPa.
•• The maximum capacity in some cycles for dry clothes to be washed
is 8 kg.
Installation
•• Never attempt to operate the appliance if it is damaged,
malfunctioning, partially disassembled, or has missing or broken
parts, including a damaged cord or plug.
•• This appliance should only be transported by two or more people
holding the appliance securely.
•• Do not install the appliance in a damp and dusty place. Do not
install or store the appliance in any outdoor area, or any area that is
subject to weathering conditions such as direct sunlight, wind, rain, or
temperatures below freezing.
•• Make sure the power plug is completely pushed into the power outlet.
•• Do not plug the appliance into multiple outlet sockets or an extension
power cable.
•• Do not modify the power plug provided with the appliance. If it does
not fit the power outlet, have a proper outlet installed by a qualified
electrician.
4
EN
•• This appliance must be grounded. In the event of malfunction or
breakdown, grounding will reduce the risk of electric shock by
providing a path of least resistance for electric current.
•• This appliance is equipped with a power cord having an equipmentgrounding conductor and a grounding power plug. The power plug
must be plugged into an appropriate outlet socket that is installed and
grounded in accordance with all local codes and ordinances.
•• Improper connection of the equipment-grounding conductor can
result in risk of electric shock. Check with a qualified electrician or
service personnel if you are in doubt as to whether the appliance is
properly grounded.
•• Tighten and secure the drain hose at connecting ends to avoid
separation.
•• For models with only one inlet water supply valve, do not connect to
hot water. Connect to cold water only.
Operation
•• Do not use a sharp object such as a knife or scissors to tamper with,
or operate the unit.
•• Do not attempt to separate any panels or disassemble the appliance.
•• Do not repair or replace any part of the appliance. All repairs
and servicing must be performed by qualified service personnel
unless specifically recommended in this Owner’s Manual. Use only
authorized factory parts.
•• Do not put animals, such as pets into the appliance.
•• Keep the area underneath and around the appliance free of
combustible materials such as lint, paper, rags, chemicals, etc.
•• Do not leave the appliance door open. Children may hang on the
door or crawl inside the appliance, causing damage or injury.
•• Do not wash or dry articles that have been cleaned in, washed in,
soaked in, or spotted with combustible or explosive substances (such
as waxes, wax removers, oil, paint, gasoline, degreasers, drycleaning
solvents, kerosene, petrol, spot removers, turpentine, vegetable oil,
cooking oil, acetone, alcohol, etc.). Improper use can cause fire or
explosion.
5
EN
•• Never reach into the appliance while it is operating. Wait until the
drum has completely stopped.
•• In case of a water leak from the appliance, disconnect the power plug
and contact the LG Electronics customer information centre.
•• Turn off water taps to relieve pressure on hoses and valves and
to minimize leakage if a break or rupture should occur. Check the
condition of the fill hoses; they may need replacement after 5 years.
•• Do not use or store flammable or combustible substances (ether,
benzene, alcohol, chemical, LPG, combustible spray, insecticide, air
freshener, cosmetics, etc.) near the appliance.
•• If there is a gas leakage (isobutane, propane, natural gas, etc.) within
the home, do not touch the appliance or power plug and ventilate the
area immediately.
•• If the drain hose or inlet hose is frozen during winter, use it only after
thawing.
•• Keep all washing detergents, softener and bleach away from children.
•• Do not touch the power plug or the appliance controls with wet hands.
•• Do not bend the power cable excessively or place a heavy object on
it.
•• Do not put your hand, foot or anything under the appliance while the
appliance is in operation.
•• Avoid touching any water that is drained from the appliance during
the wash.
•• Make sure that drainage is working properly. If water is not drained
properly, your floor may get flooded.
•• If, during spinning, opening the door does not stop the drum within
about 10 seconds, immediately discontinue operating the appliance
and contact your dealer or LG Electronics service centre.
•• Do not use a power outlet, wiring equipment and extension cord
of which the electric capacity is lower than the appliance’s rated
capacity.
•• When the air temperature is high and the water temperature is low,
condensation may occur and thus wet the floor.
•• Wipe off dirt or dust on the contacts of the power plug.
6
EN
•• Under certain conditions hydrogen gas may be produced in a water
heater that has not been used for two weeks or more. Hydrogen
gas can be explosive under these circumstances. If the HOT water
has not been used for two weeks or more, prevent the possibility
of damage or injury by turning on all Hot water taps and allowing
them to run for several minutes. Do this before using any electrical
appliance which is connected to the HOT water system. This simple
procedure will allow any built-up hydrogen gas to escape. Since the
gas is flammable, do not smoke or use an open flame or appliance
during this process.
Maintenance
•• Remove the power plug when you clean the appliance.
•• Securely plug the power plug in the outlet socket after completely
removing any moisture and dust.
•• Do not spray water inside or outside the appliance to clean it.
•• Never unplug the appliance by pulling on the power cable. Always
grip the power plug firmly and pull straight out from the outlet socket.
•• Only qualified service personnel from LG Electronics service centre
should disassemble, repair, or modify the appliance. Contact an LG
Electronics customer information centre if you move and install the
appliance in a different location.
Disposal
•• Before discarding an old appliance, unplug it. Cut off the cable
directly behind the appliance to prevent misuse.
•• Dispose of all packaging materials (such as plastic bags and
styrofoam) away from children. The packaging materials can cause
suffocation.
•• Remove the door before disposing of or discarding this appliance to
avoid the danger of children or small animals getting trapped inside.
7
INSTALLATION
EN
Parts and Specifications
NOTE
•• Appearance and specifications may change without notice to improve the quality of the appliance.
Front View
Accessories
* This feature is only available on some models.
* This feature is only available on some models.
a
b
c
d
e
f
g
h
i
j
k
l
m
8
Door
Handle
Tempered Glass
Detergent Dispenser Drawer
Fabric Softener Dispenser
Bleach Dispenser
Drum
Levelling Feet
Drain hose*
Control Panel
Lint Filter
Power Cord
Cold Water Inlet
a
b
c
d
e
Cold Water Inlet Hose
Drain Hose
Tie Strap*
Anti-Rat Cover
Screw for Anti-Rat Cover
EN
Specifications
Model
T2108VSPM2
Power Supply
230 V~, 50 Hz
Dimension
(Width X Depth X Height)
540 mm X 540 mm X 850 mm
Product Weight
Approx. 30 kg
Installation Place
Requirements
WARNING
Before installing the appliance, check the following
information in order to install the appliance in a
correct place.
Installation Location
•• Install the appliance on a flat floor of hard
material that is strong enough to support a fully
loaded appliance. (Allowable slope under the
appliance: 1º)
•• Never try to level any uneven floor by putting
pieces of wood, cardboard or similar materials
under the appliance.
•• If it is impossible to avoid positioning the
appliance next to a gas cooker or coal burning
stove, an insulation (85 X 60 cm) covered with
aluminium foil on the side facing the cooker
or stove must be inserted between the two
appliances.
•• Ensure that when the appliance is installed, it is
easily accessible for a service technician in the
event of a breakdown.
•• Additional clearance for the wall should have
10 cm for the rear and 2 cm for right and left
side.
•• This appliance must only be used for domestic
household purposes and should not be used in
mobile applications.
NOTE
•• Do not install this appliance on a raised surface
or platform, plinth or stand. It may cause injury
or serious malfunctioning.
Ventilation
•• Make sure that air circulation around the
appliance is not impeded by carpets, rugs, etc.
Ambient Temperature
•• Do not install the appliance in rooms where
freezing temperatures may occur. Frozen
hoses may burst under pressure. The reliability
of the electronic control unit may be impaired at
temperatures below freezing point.
•• If the appliance is delivered in winter and
temperatures are below freezing, place the
appliance at room temperature for a few hours
before putting it into operation.
Electrical Connection
10 cm
2 cm
2 cm
•• Do not use an extension cord or double
adapter.
•• Always unplug the appliance and turn off the
water supply after use.
•• Connect the appliance to an earthed socket in
accordance with current wiring regulations.
•• The appliance must be positioned so that the
plug is easily accessible.
9
EN
•• Power outlet must be within 1.5 meters of either
side of the appliance.
WARNING
•• Repairs to the appliance must only be carried
out by qualified personnel. Repairs carried out
by inexperienced persons may cause injury
or serious malfunctioning. Contact the LG
Electronics service centre.
•• The power plug must be plugged into an
appropriate outlet socket that is installed and
grounded/earthed in accordance with all local
codes and ordinances.
Connecting the Hose to the Water
Tap
Connecting One Touch Type Hose to Tap
Without Thread
1
Unscrew the adapter ring plate b and loose
the 4 fixing screws.
2
Remove the guide plate c if the tap is too
large to fit the adapter.
3
Push the adapter onto the end of the tap
so that the rubber seal is connected to be
watertight. Tighten the 4 fixing screws and the
adapter ring plate.
Connecting the Water Inlet
Hose
Before connecting the water inlet hose to the water
tap, check the hose fitting type and then choose
the correct instruction.
Note for Connection
•• Water supply pressure must be between 30
kPa and 800 kPa (0.3 - 8.0 kgf / cm²). If the
water supply pressure is more than 800 kPa, a
decompression device should be installed.
•• Do not overtighten the water inlet hose to the
valve.
•• Periodically check the condition of the hose
and replace the hose if necessary.
Checking the Rubber Seal
Two rubber seals a are supplied with the water
inlet hoses. They are used to prevent water leaks.
Make sure the connection to taps should be
sufficiently tight.
10
EN
4
Pull the connector latch plate d down, push
the inlet hose onto the adapter, and release
the connector latch plate. Make sure the
adapter locks into place.
Installing the Drain Hose
Before connecting the drain hose, check your drain
hose model and choose the correct instruction.
Installing the Drain Hose without
the Elbow Bracket
1
Push the elbow hose toward the body of the
appliance.
2
To change the direction of the hose, pull out
the elbow hose and change the direction.
Repeat Step 1.
NOTE
•• After connecting the water inlet hose to the
water tap, turn on the water tap to flush out
foreign substances (dirt, sand, sawdust, and
etc.) in the water lines. Let the water drain into
a bucket, and check the water temperature.
Connecting the Hose to the
Appliance
Screw the water inlet hose to the water inlet valve
on the back of the appliance.
•• Do not connect the hose to the hot water
supply for models with one water inlet. Connect
to the cold water supply only.
Positioning the Drain Hose
•• The length of the drain hose should not exceed
300 cm. Do not place the drain hose more than
6 cm above the threshold.
FP
NOTE
FP
•• After completing connection, if water leaks from
the hose, repeat the same steps. Use the most
conventional type of tap for the water supply. In
case that the tap is square or too big, remove
the guide plate before inserting the tap into the
adaptor.
11
EN
•• The outlet of the drain hose should not be
submerged in water.
•• Turn the adjustable feet clockwise to raise
or turn the adjustable feet counterclockwise
to lower from front-to-back, side-to-side and
corner-to-corner.
•• Make sure the drain hose is not kinked.
NOTE
Levelling the appliance prevents unnecessary
noise and vibration. Check whether the appliance
is perfectly level after installation.
•• If the appliance rocks when pushing the top
plate of the appliance diagonally, adjust the feet
again.
•• Do not insert pieces of wood etc. under the
feet.
•• Timber or suspended type flooring will
contribute to excessive vibration and
unbalance. Reinforcing or bracing the timber
floor may need to stop or reduce excessive
noise and vibration.
•• Do not install the appliance on any elevated
surface or platform, as it may become unstable
and cause serious injury and damage.
•• If the appliance is installed on a uneven, weak
or tilted floor causing excessive vibration, spin
failure or UE error can occur. It must be placed
on a firm and level floor to prevent spin failure.
Adjusting and Levelling the Feet
Assembling the Anti-Rat Cover
Levelling the Appliance
Checking the Level
When the appliance is not perfectly level, turn
the adjustable feet until the appliance no longer
wobbles.
You can insert the anti-rat cover according to the
type to protect the appliance from the rat.
Flat Type
Insert the flat type of the anti-rat cover to the
assembling hole from the back of the appliance.
12
OPERATION
Operation Overview
Using the Appliance
Before the first wash, select the Normal
programme and add a half amount of detergent.
Start the appliance without laundry.
•• This will remove residue and water from
the drum that may have been left during
manufacturing.
1
Sort laundry and load items.
•• Sort laundry by fabric type, soil level, colour
and item size as needed. Open the door
and load items into the appliance.
2
Add detergent, fabric softener and/or bleach.
•• Add the proper amount of detergent to the
detergent dispenser drawer. If desired, add
bleach or fabric softener to the appropriate
areas of the dispenser.
3
Turn on the appliance.
•• Press the POWER button to turn on the
appliance.
4
Choose the desired wash cycle.
•• Press the Program button repeatedly until
the desired programme is selected.
•• Select the option button to adjust wash
temperature, spin speed, etc. Refer to a
fabric care label of your clothes for any
warning or special instructions.
5
Begin cycle.
•• Press the START/PAUSE button to begin
the cycle.
•• The appliance will agitate briefly without
water to measure the weight of the laundry.
•• If the START/PAUSE button is not pressed
within a certain time, the appliance will shut
off and all settings will be lost.
6
End of cycle.
•• When the cycle is finished, a melody will
sound. Immediately remove your clothing
from the appliance to reduce wrinkling.
EN
NOTE
•• The Auto Restart function allows the cycle
to restart by itself in case of power failure. It
resumes from the stage where it stopped.
Preparing Laundry
Sort laundry for best washing results, and then
prepare laundry according to the symbols on the
care labels.
Sorting the Clothes
•• For best washing results, sort your clothes
according to a care label stating fabric type and
washing temperature. Adjust the spin speed to
wash them.
•• Soil level (Heavy, Normal, Light): Separate
clothes according to soil level. If possible, do
not wash heavily soiled items with lightly soiled
ones.
•• Colour (White, Lights, Darks): Wash separately
dark or dyed clothes from whites or light
colours. Mixing dyed clothes with light clothes
can result in dye transfer or discolouration of
lighter clothes.
•• Lint (Lint producers, Collectors): Wash
separately lint producing fabrics from lint
collecting fabrics. Lint producers can result in
pilling and linting on the lint collectors.
13
EN
Checking the Fabric Care Label
This will tell you about the fabric content of your
clothes and how it should be washed.
Symbols on the Care Labels
Symbol
Wash / Fabric type
•• Normal Wash
•• Cotton, Mixed Fabrics
•• Easy Care
•• Synthetic, Mixed Fabrics
•• Special Delicate Wash
•• Delicates
•• Hand Wash Only
•• Wool, Silk
•• Do not wash
NOTE
•• The dashes under the symbol give you
information about the type of fabric and the
maximum allowance of mechanical stress.
Checking the Laundry before
Loading
•• Combine large and small items in a load. Load
large items first. Large items should not be
more than half of total load.
•• Do not wash single small items. Add 1 - 2
similar items to the load to prevent an out-ofbalance load.
•• Make sure to empty all pockets. Items such as
nails, hair clips, matches, pens, coins and keys
can cause irreparable damage to both your
appliance and clothes.
14
•• Wash delicates (stockings, underwired bras) in
a wash net.
•• Close zippers, hooks and strings to make sure
that these items do not snag other clothes.
•• Pre-treat dirt and stains by saturating the
dirt and stains with dissolved detergent and
brushing them in order to remove dirt.
CAUTION
•• Do not wash or spin any item labelled or known
to be water-proof or water-resistant, even if the
product care label on the item permits machine
washing. Failure to follow these instructions
could result in severe damage to your washing
load, your appliance and/or property damage
as a result of abnormal load friction or vibration
of the appliance.
−− Examples of water-proof or water-resistant
items include certain mattress pads, mattress
covers, rain gear, camping gear, skiing
apparel, outdoor gear and similar items.
EN
Adding Detergents,
Softeners and Bleaches
Detergent Dosage
•• Detergent should be selected according to
fabric type, colour, soil level and washing
temperature and should be used according to
the detergent manufacturer’s instructions.
•• Too much detergent results in excessive suds
which cause poor washing.
•• When you use liquid detergent, follow
the guidelines provided by the detergent
manufacturer.
•• You can pour liquid detergent directly into
the main detergent drawer if you are starting
the wash cycle immediately. It is also
recommended that it be added into the drum
when loading the clothes.
•• Do not use liquid detergent if you have selected
Pre Wash+Normal option, as the liquid may
harden.
•• Reduce the amount of detergent if too many
suds are formed.
•• Detergent usage may need to be adjusted for
water temperature, water hardness, size and
soil level of the laundry. For best results, avoid
oversudsing.
•• Refer to the label of the clothes, before
choosing the detergent and water temperature.
•• Use only suitable detergents for the respective
type of clothing:
−− General powdered detergents for all types
of fabric
−− Powdered detergents for delicate fabric
−− Liquid detergents for all types of fabric or
designated detergents only for wool
•• For better washing performance and whitening,
use detergent that contains general powdered
bleach.
•• Detergent is dispensed from the dispenser at
the beginning of the cycle.
•• Dilute liquid detergent with water, pour into the
drum and start the cycle.
CAUTION
•• Using liquid detergent without diluting, or
leaving laundry for a long time after pouring
diluted liquid detergent into the drum might
cause the clothes to be damaged, bleached,
discoloured.
NOTE
•• Do not let the detergent harden. Doing so may
lead to blockages, poor rinse performance or
odour.
•• Full load: According to manufacturer’s
recommendation
•• Part load: 3/4 of the normal amount
•• Minimum load: 1/2 of full load
Adding Detergents
•• Add the measured amount of detergent into the
detergent compartment a.
•• Use more detergent if you have hard water,
large items, greasy or oily soils or lower water
temperature.
•• Soap flakes or granulated soap powders should
not be used in the appliance. When washing
woollens, remember to use detergent suitable
for washing woollens.
NOTE
•• Use the appropriate amount of detergent. Too
much detergent, bleach or softener may cause
an overflow or a malfunction.
15
EN
Adding Fabric Softeners
Adding Liquid Bleaches
•• Softener should be used according to the
softener manufacturer’s instructions.
•• Pour the measured amount of fabric softener
directly into the softener dispenser a.
•• Before starting the appliance, pour the
measured amount of bleach directly into
the bleach dispenser a. Avoid splashing or
overfilling.
•• If the softener is concentrated, then it should
be diluted.
•• Do not leave the fabric softener in the softener
dispenser for more than 2 days. Fabric softener
may harden.
•• Softener will automatically be added during the
last rinse cycle.
•• Solvents (benzene, etc.) must never be used.
•• Mix powdered bleach with water to a liquid
consistency and pour it into the bleach
dispenser.
•• Check clothing care label for special
instructions and separate the laundry to be
bleached.
•• Dilute liquid chlorine bleach with water.
•• Measure the recommended amount of liquid
bleach carefully according to instructions on
the bottle.
NOTE
•• Do not pour the softener over 35 mL. Pouring
excessive fabric softener over the maximum
amount can cause it to dispense too early,
which may stain clothes.
•• A cup with a pouring spout can help you avoid
leakage.
•• Do not pour fabric softener directly onto the
laundry. Doing so will cause staining on the
clothes that will be difficult to remove.
16
CAUTION
•• Never pour undiluted liquid bleach directly
onto laundry or into the wash basket. This
may cause change of colour or damage to the
laundry.
•• Do not pour powdered bleach into the bleach
dispenser. Powdered bleach may harden, so it
will block the bleach dispenser.
EN
Control Panel
Control Panel Features
a
POWER Button
•• Press the POWER button to turn on or off the appliance.
•• The appliance automatically turns off once a certain time has passed after the wash has completed.
b
START/PAUSE Button
•• Press the START/PAUSE button to start or pause a wash cycle.
•• Press the START/PAUSE button to stop a wash cycle temporarily.
NOTE
•• If the START/PAUSE button is not pressed within a certain time, the appliance will shut off and all
settings will be lost.
c
Program Button
•• Programmes are available according to the laundry type.
•• When you select a programme, the number in front of programme name is indicated in the time display.
d
Extra Options and Functions
•• You can use the extra options and functions to customize the programmes.
e
Cycle Status Indicator
•• The cycle status indicator is turned on before the start.
•• The cycle status indicator blinks during that process, and then the indicator turns off when that process
has completed.
17
EN
f
Display
•• The display shows the settings, remaining estimated time, options, and status messages. When the
appliance is turned on, the default settings in the display will light up.
•• 88 : When a programme is selected, the default time for that programme is displayed. The time can
change as options are selected.
−− The time shown is only an estimate. Several external factors (laundry size, room temperature,
incoming water temperature, etc.) can affect the actual time.
•• F : This icon turns on when the load sensing has detected the laundry size.
•• Y : This icon turns on when the Water Level button is pressed to adjust the water level. When the
water level is selected, the water level is indicated in the time display.
•• Min : This icon turns on when the remaining time is indicated in the time display.
•• Q : This icon turns on when the Program button is pressed to select the desired programme.
Washing Programme
Wash programmes are designed for the best wash
performance for different types of clothes.
•• Press the Program button to select the
desired programme.
•• When you select a wash programme, the light
for the corresponding wash programme will
turn on.
Normal
Use this programme to wash normal laundry.
The built-in sensor detects the weight of the
laundry, calculating wash, rinse and, spin settings
accordingly.
•• If water or wet laundry is already in the
drum before the start, the water level will be
increased.
•• For lightweight and bulky items, the water
level may be too low. Increase the water level
manually.
Wool
Use this programme to wash delicate fabrics such
as lingerie and woollens. Before washing, check
the care label for the washing instructions.
•• This programme uses a slow spin to prevent
the clothes from being damaged, so the
laundry has more moisture than normal.
18
NOTE
•• Hang or lay your delicates flat when you dry
them.
•• Only cold water will be used for this programme
as hot water may damage laundry.
Duvet
Use this programme to wash a blanket or
bedclothes that have the hand wash sign on the
care label.
•• Cashmere bedclothes, acrylic blanket, mixed
spinning blanket, woollen blanket, infilling
(polyester 101), and bed sheets might be
damaged if they are allowed to float. It is
recommended to purchase a separate laundry
net to wash.
•• Separate bed clothes from general clothes. It
might cause laundry to be unbalanced, which
results in abnormal washing.
•• Spin dry might take longer to redistribute the
laundry evenly if bedclothes are lumped to a
side.
•• Never wash an electric blanket, carpets, rugs
or shoes. It can cause damage to the appliance
and other items in the wash.
•• Put bedclothes into a laundry net and then
soak and sink them in water so that they are
less likely to float. If the items float during the
wash or spin, it may damage the appliance and
the clothes.
EN
•• Regardless of size, we recommend washing
bedclothes individually. If two bedclothes with
different materials are washed at the same
time, it might cause a spin malfunction due to
imbalance.
CAUTION
•• When putting a blanket into the drum, do not
load it over the maximum line a. The blanket
must also be submerged in the water. Failure
to do so or overloading the blanket in the
appliance will result in damage to the wash
load and the appliance.
Eco Save
Use this programme to consume less water and
electricity to wash normal clothes.
• For water efficiency labelling programme, select
the Eco Save programme and
Water Level 7 options as below.
• This is recommended programme designed to
minimize water consumption for normally soiled
load at rated load capacity.
• This programme tests it in accordance with
IEC60456.
NOTE
•• Do not use fabric softener when you select the
rinse twice.
Tub Clean
Rinse+Spin
Use this programme to rinse and spin laundry
separately from a regular programme.
•• This can be helpful in preventing fresh stains
from setting in fabrics.
CAUTION
•• When you select this option, do not add the
fabric softener into the softener dispenser. It
may cause stain clothes.
Pre Wash+Normal
Use this programme to pretreat immediate stain
without handwash.
•• It is necessary for clothes which could smell
bad if they are not washed promptly.
Quick Wash
Use this programme to wash lightly soiled clothes
for a short time.
NOTE
•• This programme’s recommended amount of
laundry is under 2.5 kg.
This is a special function to clean inside the drum
of your appliance.
•• To use this function, refer to the
MAINTENANCE for details.
Extra Options and
Functions
You can use the extra options and functions on
some programmes to customize the cycle.
•• The extra options and functions can be
changed when the START/PAUSE button is
pressed during operation depending on the
selected programmes, options and functions.
Water Level
This appliance detects the amount of laundry
automatically, then sets the water level. However,
manually increasing the water level may be
required and recommended to avoid linting and
unbalanced errors when the load is bulky but
lightweight.
•• Press Water Level option to adjust water level.
•• When you select a wash programme, the water
level will be shown on the control panel.
•• When water level is automatically detected, it
may differ depending on the amount of laundry
even though the same water level is indicated
on the control panel.
19
EN
Process
When you need a Wash+Rinse+Spin, Spin only,
Rinse+Spin, Rinse only, Wash+Rinse, Wash only
cycle, these can be set manually.
•• Press the Process button to select Wash,
Rinse and Spin options as desired.
1
Press the POWER button.
2
Press the Process button until light up.
•• When you select a programme, the LED in
front of each option is light up.
•• When the controls are locked, CL and the
remaining time are alternatively shown on the
display during the wash while the child lock is
engaged.
•• Turning off the power will not reset this
function. You must deactivate this function
before you can access any other options and
functions.
Locking the Control Panel
1
Turn on the power.
2
Press and hold the Water Level and Program
buttons simultaneously for 3 seconds to
activate this function.
3
Press the Water Level button to adjust the
water level according to the amount of laundry.
4
Add laundry into the drum.
Unlocking the Control Panel
5
Press the START/PAUSE button to start the
cycle(s).
1
Turn on the power.
6
Add the detergent into the detergent dispenser
and close the door.
2
Press and hold the Water Level and Program
buttons simultaneously for 3 seconds to
deactivate this function.
•• When this function is deactivated, a beeper
will sound and the remaining time for the
current cycle will reappear on the display.
NOTE
•• When you set a washing cycle manually such
as rinse only, wash only or wash and rinse, the
water will not be drained out after the wash is
completed. If you wish to drain the water, select
a spin only cycle after the wash has completed.
•• If a rinse only cycle is selected, the water
supply is started after detecting the load and
this cycle will start. However this cycle will
start to supply water of the selected water level
if there is already water in the tub.
•• If you do not select or change the Water Level,
the water level will be set automatically.
Child Lock
Use this function to disable the controls. This
function can prevent children from changing
programmes or operating this appliance.
NOTE
•• Once this function is set, all buttons are locked
except the POWER button.
20
SMART FUNCTIONS
Using Smart Diagnosis
Smart Diagnosis Through the
Customer Information Centre
Use this function if you need an accurate diagnosis
by an LG Electronics customer information centre
when the appliance malfunctions or fails. Use this
function only to contact the service representative,
not during normal operation.
1
Press the POWER button to turn on the
appliance.
•• Do not press any other buttons.
2
When instructed to do so by the call centre,
place the mouthpiece of your phone close to
the Smart Diagnosis icon.
EN
NOTE
•• This function depends on the local call quality.
•• The communication performance will improve
and you can receive better service if you use
the home phone.
•• If the data transfer is poor due to poor call
quality, you may not receive the best diagnosis
service.
x.
Ma
mm
0
1
3
Press and hold the Water Level button for 3
seconds.
4
Keep the phone in place until the tone
transmission has finished. Time remaining for
data transfer is displayed.
•• For best results, do not move the phone
while the tones are being transmitted.
•• If the call centre agent is not able to get an
accurate recording of the data, you may be
asked to try again.
5
Once the countdown is over and the tones
have stopped, resume your conversation with
the call centre agent, who will then be able to
assist you using the information transmitted for
analysis.
21
MAINTENANCE
WARNING
•• Unplug the appliance before cleaning to avoid
the risk of electric shock. Failure to follow
this warning may result in serious injury, fire,
electric shock, or death.
•• Never use harsh chemicals, abrasive cleaners,
or solvents to clean the appliance. They may
damage the finish.
Cleaning after Every Wash
What to Clean
•• If you always use cold water, we recommend
that a warm or hot wash be used at regular
intervals e.g. every 5th wash should be at least
a warm one.
•• Turn off taps after use to prevent the chance of
flooding, otherwise an inlet hose may burst.
•• Always unplug the power cord after use.
•• After the cycle is finished, wipe the door and
the inside of the door seal to remove any
moisture.
WARNING
•• Leave the door open to dry the drum interior
but only if it is safe and any children are
supervised.
Cleaning the Exterior
Proper care of the appliance can extend the
service life.
Exterior
•• Immediately wipe off any spills.
•• Wipe with a damp cloth.
•• Do not press on the surface or the display with
sharp objects.
Dispenser Drawer
•• Detergent may build up in the dispenser
drawer. Remove the drawer and inserts from
the dispenser drawer and check for build-up
once or twice a month.
22
EN
Cleaning the Appliance
Periodically
Tub Clean
This function is a special to help to clean the inside
of the appliance.
Run this function once a month (or more often if
needed) to remove detergent build-up and other
residue.
1
Remove any clothing or items from the
appliance.
2
Open the dispenser drawer and add antilimescale to the main wash compartment.
3
Close the dispenser drawer slowly. Close the
door.
4
Press the POWER button.
5
Press the Program button to select
Tub Clean.
6
Press the START/PAUSE button to start.
7
After the cycle is complete, leave the door
open in order to allow the appliance door
opening, flexible gasket and door glass to dry.
WARNING
•• Leave the door open to dry the drum interior
but only if it is safe and any children are
supervised.
NOTE
•• Do not add any detergent to the detergent
dispenser drawer for this function. Excessive
suds may generate and leak from the
appliance.
•• For models with a lint filter, remove lint or dirt
inside the lint filter before and after using this
programme.
•• For models without a lint filter, the lint is
discharged when the water drains during
washing.
•• After finishing this programme, open the
appliance door to remove irritant odour.
EN
Cleaning the Water Inlet Filter
Water inlet filter collects lime or any small objects
that may be in water supplied to the appliance.
Clean the water inlet filter regularly.
•• Turn off the water taps to the appliance if the
appliance is to be left for any length of time
(e.g. holiday), especially if there is no floor
drain (gully) in the immediate vicinity.
••IE error message will be displayed on the
control panel when water is not entering the
detergent drawer.
•• If the water is very hard or contains traces of
limescale, the filter on the water inlet may be
clogged.
1
Turn off the power and the water tap and then
unscrew the water inlet hose.
2
Remove the water inlet filter with small pliers
and then clean the filter using a medium bristle
tooth brush.
Cleaning the Lint Filter
•• If the mesh hole of the lint filter is clogged,
foreign objects in the laundry may not be
filtered.
•• Do not leave iron objects (such as clothes pins,
hairpins, etc.) in the lint filter as they promote
rust.
1
Push down on the release tabs on both sides
of the filter cover and pull forward.
2
Open the lid and remove the lint.
3
Wash the filter.
4
Close the lid and then insert the lower part of
the filter into the wash drum. Press the top of
the filter until you hear a click sound.
The filter is an important part for an efficient
washing performance result, so take a special
care. Clean the filter regularly.
CAUTION
•• Clean the lint filter after at least 2 - 3 washes.
•• Do not drop the filter on the floor.
•• Be careful not to get your fingernails caught in
the filter when you handle the filter.
•• The lint filter should be back into its original
position after being washed to avoid damage
to your laundry items. Do not operate the
appliance with the lint filters removed.
23
TROUBLESHOOTING
EN
Before Calling for Service
Operation of the appliance can lead to errors and malfunctions. The following tables contain possible
causes and notes for resolving an error message or malfunction. You can remedy most of the problems by
yourself, consequently save time and money, since you do not need to call LG Electronics service centre.
The following table should assist you by troubleshooting.
Error Messages
The appliance is equipped with an automatic error-monitoring system to detect and diagnose problems at
an early stage. If this appliance does not function properly or does not function at all, check the following
before you call LG Electronics service centre.
Symptoms
dE
DOOR ERROR
Possible Cause & Solution
The door is not closed properly.
•• Close the door completely. If the error code is still displayed, call for
service.
Water supply tap(s) are not completely open.
•• Fully open tap.
Water inlet hose(s) are kinked, pinched, or crushed.
•• Straighten or reinstall the water inlet hose(s).
IE
INLET ERROR
The filter of the inlet hose(s) are clogged.
•• Check and clean the filter of the inlet hose(s).
Water supply pressure to tap or house is too low or too high.
•• Contact a plumber to have the water pressure checked or restored to the
operating requirements.
Water supply is connected with leak limiting hose(s).
•• Do not use leak limiting hose(s).
OE
WATER OUTLET ERROR
Drain hose is kinked, pinched, or clogged.
•• Clean and straighten the drain hose.
Drain discharge is more than 1.2 m above the bottom of the appliance.
•• Adjust the hose or reconfigure the drain pipe. Maximum drain height is
1.2 m.
UE
UNBALANCE ERROR
Rebalancing operation is not successful.
•• The automatic attempt to rebalance the laundry was not successful. The
cycle has been paused to allow the laundry to be manually adjusted.
The load is too small.
•• Add more items to allow the appliance to balance the laundry.
Heavy items are mixed with lighter items.
•• Wash items of somewhat similar weight.
The load is out of balance.
•• Manually redistribute the laundry if laundry have become tangled.
24
EN
Symptoms
FE
OVERFLOW ERROR
PE
PRESSURE SENSOR
ERROR
LE
MOTOR LOCKED
ERROR
Possible Cause & Solution
Water overfills due to the faulty water valve.
•• Close the water taps, unplug the appliance, and call for service.
The water level sensor is not working correctly.
•• Close the water taps, unplug the appliance, and call for service.
A motor error has occurred.
•• Allow the appliance to stand for 30 minutes and then restart the cycle.
•• If the error code is still displayed, call for service.
Performance
Symptoms
Reason
Incomplete or
no dispensing of
detergent
Too much detergent is used.
•• Follow the guidelines provided by the detergent manufacturer.
Poor stain removal
Previously set stains.
•• Items that have previously been washed may have stains that have been
set. These stains may be difficult to remove and may require hand washing
or pretreating to aid in stain removal.
Staining
Bleach or softener dispensed too soon.
•• Dispenser compartment is overfilled causing bleach or softener to
dispense immediately. ALWAYS measure bleach to prevent overfilling.
•• Close the dispenser drawer gently.
Bleach or softener was added directly to the laundry in the drum.
•• Always use the dispensers to ensure that laundry products are properly
dispensed at the right time in the cycle.
Clothes were not properly sorted.
•• Always wash dark colours separately from light colours and whites to
prevent discolouration.
•• Never wash heavily soiled items with lightly soiled items.
Wrinkling
Musty or mildewy
odour in the appliance
Appliance is not unloaded promptly.
•• Always remove items from the appliance as soon as the cycle is complete.
Appliance overloaded.
•• The appliance can be fully loaded, but the drum should not be tightly
packed with items. The door of the appliance should be closed easily.
Hot and cold water inlet hoses are reversed.
•• Hot water rinse can set wrinkles in clothes. Check the inlet hose
connections.
Inside of drum was not cleaned properly.
•• Run the Tub Clean function regularly.
25
Memo
Memo
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising