LG | 65UT761H0CB | User guide | LG 65UT761H0CB 用戶指南

LG 65UT761H0CB 用戶指南
LED TV
65UT761H0CB
a X4
(M5 x L25)
b X4
(M4 x L12)
12
Head
www.lg.com washer
ղࢶQU
ղࢶQU
৮ࢿ‫޷੉ػ‬૑ࠂઁೞৈ
1BUIGJOEFS6OJUF৻ࢶઁ੘
QU "MJHOTUSPLFPVUTJEF
৮ࢿ‫޷੉ػ‬૑ࠂઁೞৈ
1BUIGJOEFS6OJUF৻ࢶઁ੘
QU "MJHOTUSPLFPVUTJEF
14
16
20
ղࢶQU
৮ࢿ‫޷੉ػ‬૑ࠂઁೞৈ
1BUIGJOEFS6OJUF৻ࢶઁ੘
QU "MJHOTUSPLFPVUTJEF
1
5
2
3
6
4
a
7
8
9
b
11
10
Kg
65UT761H0CB
1451
910
323.7
840
64
25.8
24.1
*MFL71382597*
(1908-REV00)
OWNER’S MANUAL
Safety and Reference
LED TV*
* LG LED TV applies LCD screen with LED backlights.
Please read this manual carefully before operating your set and retain it
for future reference.
www.lg.com
Copyright © 2019 LG Electronics Inc. All Rights Reserved.
Warning! Safety instructions
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
ENGLISH
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT
REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE.
REFER TO QUALIFIED SERVICE PERSONNEL.
The symbol is intended to alert the user to the presence of
uninsulated dangerous voltage within the product’s
enclosure that may be of sufficient magnitude to constitute a risk
of electric shock to persons.
The symbol is intended to alert the user to the presence of
important operating and maintenance (servicing)
instructions in the literature accompanying the device.
WARNING: TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO
NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
•• TO PREVENT THE SPREAD OF FIRE, KEEP CANDLES OR OTHER ITEMS
WITH OPEN FLAMES AWAY FROM THIS PRODUCT AT ALL TIMES.
•• Do not place the TV and/or remote control in the following
environments:
-- Keep the product away from direct sunlight.
-- An area with high humidity such as a bathroom
-- Near any heat source such as stoves and other devices that produce
heat.
-- Near kitchen counters or humidifiers where they can easily be
exposed to steam or oil.
-- An area exposed to rain or wind.
-- Do not expose to dripping or splashing and do not place objects
filled with liquids, such as vases, cups, etc. on or over the apparatus
(e.g., on shelves above the unit).
-- Near flammable objects such as gasoline or candles, or expose the
TV to direct air conditioning.
-- Do not install in excessively dusty places.
Otherwise, this may result in fire, electric shock, combustion/
explosion, malfunction or product deformation.
2
•• Ventilation
-- Install your TV where there is proper ventilation. Do not install in a
confined space such as a bookcase.
-- Do not install the product on a carpet or cushion.
-- Do not block or cover the product with cloth or other materials while
unit is plugged in.
•• Take care not to touch the ventilation openings. When watching the TV
for a long period, the ventilation openings may become hot.
•• Protect the power cord from physical or mechanical abuse, such as
being twisted, kinked, pinched, closed in a door, or walked upon. Pay
particular attention to plugs, wall outlets, and the point where the
cord exits the device.
•• Do not move the TV whilst the Power cord is plugged in.
•• Do not use a damaged or loosely fitting power cord.
•• Be sure do grasp the plug when unplugging the power cord. Do not
pull on the power cord to unplug the TV.
•• Do not connect too many devices to the same AC power outlet as this
could result in fire or electric shock.
•• Disconnecting the Device from the Main Power
-- The power plug is the disconnecting device. In case of an
emergency, the power plug must remain readily accessible.
•• Do not let your children climb or cling onto the TV. Otherwise, the TV
may fall over, which may cause serious injury.
•• Outdoor Antenna Grounding (Can differ by country):
-- If an outdoor antenna is installed, follow the precautions below.
An outdoor antenna system should not be located in the vicinity
of overhead power lines or other electric light or power circuits,
or where it can come in contact with such power lines or circuits
as death or serious injury can occur. Be sure the antenna system is
grounded to provide some protection against voltage surges and
built-up static charges Section 810 of the National Electrical Code
(NEC) in the U.S.A. provides information with respect to proper
grounding of the mast and supporting structure, grounding of
the lead-in wire to an antenna discharge unit, size of grounding
conductors, location of antenna discharge unit, connection to
grounding electrodes and requirements for the grounding electrode.
Antenna grounding according to the National Electrical Code, ANSI/
NFPA 70
•• Batteries
-- Store the accessories (battery, etc.) in a safe location out of the reach
of children.
-- Do not short circuit, disassemble, or allow the batteries to overheat.
Do not dispose of batteries in a fire. Batteries should not be exposed
to excessive heat.
•• Moving
-- When moving, make sure the product is turned off, unplugged, and
all cables have been removed. It may take 2 or more people to carry
larger TVs. Do not press or put stress on the front panel of the TV.
Otherwise, this may result in product damage, fire hazard or injury.
•• Keep the packing anti-moisture material or vinyl packing out of the
reach of children.
•• Do not allow an impact shock, any objects to fall into the product, and
do not drop anything onto the screen.
•• Do not press strongly upon the panel with a hand or a sharp object
such as a nail, pencil, or pen, or make a scratch on it. It may cause
damage to screen.
•• Cleaning
-- When cleaning, unplug the power cord and wipe gently with a soft/
dry cloth. Do not spray water or other liquids directly on the TV. Do
not clean your TV with chemicals including glass cleaner, any type of
air freshener, insecticide, lubricants, wax (car, industrial), abrasive,
thinner, benzene, alcohol etc., which can damage the product and/
or its panel. Otherwise, this may result in electric shock or product
damage.
3
ENGLISH
•• Grounding (Except for devices which are not grounded.)
-- TV with a three-prong grounded AC plug must be connected to a
three-prong grounded AC outlet. Ensure that you connect the earth
ground wire to prevent possible electric shock.
•• Never touch this apparatus or antenna during a lightning storm. You
may be electrocuted.
•• Make sure the power cord is connected securely to the TV and wall
socket if not secured damage to the Plug and socket may occur and in
extreme cases a fire may break out.
•• Do not insert metallic or inflammable objects into the product. If a
foreign object is dropped into the product, unplug the power cord and
contact the customer service.
•• Do not touch the end of the power cord while it is plugged in. You may
be electrocuted.
•• If any of the following occur, unplug the product immediately
and contact your local customer service.
-- The product has been damaged.
-- If water or another substance enters the product (like an AC adapter,
power cord, or TV).
-- If you smell smoke or other odors coming from the TV.
-- When lightning storms or when unused for long periods of time.
Even the TV is turned off by remote control or button, AC power source
is connected to the unit if not unplugged in.
•• Do not use high voltage electrical equipment near the TV (e.g., a bug
zapper). This may result in product malfunction.
•• Do not attempt to modify this product in any way without written
authorization from LG Electronics. Accidental fire or electric shock
can occur. Contact your local customer service for service or repair.
Unauthorized modification could void the user’s authority to operate
this product.
•• Use only an authorized attachments / accessories approved by
LG Electronics. Otherwise, this may result in fire, electric shock,
malfunction, or product damage.
•• Never disassemble the AC adapter or power cord. This may result in fire
or electric shock.
•• Handle the adapter carefully to avoid dropping or striking it. An impact
could damage the adapter.
•• To reduce the risk of fire or electrical shock, do not touch the TV with
wet hands. If the power cord prongs are wet or covered with dust, dry
the power plug completely or wipe dust off.
ENGLISH
Preparing
Separate Purchase
•• If the TV is turned on for the first time after it was shipped from the
factory, initialization of the TV may take a few minutes.
•• Image shown may differ from your TV.
•• Your TV’s OSD (On Screen Display) may differ slightly from that shown
in this manual.
•• The available menus and options may differ from the input source or
product model that you are using.
•• New features may be added to this TV in the future.
•• The device must be easily accessed to a location outlet near the access.
Some devices are not made by turning on / off button, turning off the
device and unplugging the power cord.
•• The items supplied with your product may vary depending on the
model.
•• Product specifications or contents of this manual may be changed
without prior notice due to upgrade of product functions.
•• For an optimal connection, HDMI cables and USB devices should have
bezels less than 10 mm thick and 18 mm width. Use an extension
cable that supports USB if the USB cable or USB memory stick does
not fit into your TV’s USB port.
Separate purchase items can be changed or modified for quality
improvement without any notification. Contact your dealer to buy these
items. These devices only work with certain models.
The model name or design may be changed depending on the upgrade
of product functions, manufacturer’s circumstances or policies.
(Depending on model)
(Depending on model)
AN-MR18HA
Check whether your TV model supports Bluetooth in the Wireless Module
Specification to verify whether it can be used with the Magic Remote.
Wall Mounting Bracket
Make sure to use screws and wall mounts that meet the VESA standard.
Standard dimensions for the wall mount kits are described in the
following table.
B
B
A
Magic Remote Control
* A ≤ 10 mm
A
A
B
* B ≤ 18 mm
•• Use a certified cable with the HDMI logo attached.
•• If you do not use a certified HDMI cable, the screen may not display or
a connection error may occur. (Recommended HDMI Cable Types)
-- Ultra High-Speed HDMI®/™ cable (3 m or less)
Model
VESA (A x B) (mm)
Standard screw
Number of screws
Model
VESA (A x B) (mm)
Standard screw
Number of screws
49UT761H0CA
200 x 200
M6
4
LSW240B
MSW240
65UT761H0CB
300 x 300
M6
4
55UT761H0CA
300 x 300
M6
4
OLW480B
MSW240
75UT761H0CA
600 x 400
M8
4
Wall mount bracket
OLW480B
LSW640B
Wall mount bracket
4
Lifting and Moving the TV
ENGLISH
Please note the following advice to prevent the TV from being scratched
or damaged and for safe transportation regardless of its type and size.
•• It is recommended to move the TV in the box or packing material that
the TV originally came in.
•• Before moving or lifting the TV, disconnect the power cord and all
cables.
•• When holding the TV, the screen should face away from you to avoid
damage.
•• Avoid touching the screen at all times, as this may result in
damage to the screen.
•• Do not move the TV by holding the cable holders, as the
cable holders may break, and injuries and damage to the
TV may occur.
•• When attaching the stand to the TV set, place the screen
facing down on a cushioned table or flat surface to protect
the screen from scratches.
Mounting on a Table
1 Lift and tilt the TV into its upright position on a table.
-- Leave a 10 cm (minimum) space from the wall for proper
ventilation.
•• Hold the top and bottom of the TV frame firmly. Make sure not to hold
the transparent part, speaker, or speaker grille area.
10 cm
10 cm
10 cm
10 cm
10 cm
•• When transporting a large TV, there should be at least 2 people.
•• When transporting the TV by hand, hold the TV as shown in the
following illustration.
•• When transporting the TV, do not expose the TV to jolts or excessive
vibration.
•• When transporting the TV, keep the TV upright; never turn the TV on
its side or tilt towards the left or right.
•• Do not apply excessive pressure to cause flexing / bending of frame
chassis as it may damage screen.
•• When handling the TV, be careful not to damage the protruding
buttons.
(Depending on model)
2 Connect the power cord to a wall outlet.
•• Do not apply foreign substances (oils, lubricants, etc.) to the
screw parts when assembling the product. (Doing so may
damage the product.)
•• If you install the TV on a stand, you need to take actions
to prevent the product from overturning. Otherwise, the
product may fall over, which may cause injury.
•• Do not use any unapproved items to ensure the safety and
product life span.
•• Any damage or injuries caused by using unapproved items
are not covered by the warranty.
•• Make sure that the screws are fastened tightly. (If they
are not fastened securely enough, the TV may tilt forward
after being installed.) Do not use too much force and over
tighten the screws; otherwise screw may be damaged and
not tighten correctly.
5
Attaching the TV to a Desk
(Depending on model)
The TV should be attached to a desk so it cannot be pulled in a forward/
backward direction, potentially causing injury or damaging the product.
A type
Using the Kensington Security
System (optional)
(Depending on model)
The Kensington security system connector is located at the rear of the
TV. For more information of installation and using, refer to the manual
provided with the Kensington security system or visit http://www.
kensington.com. Connect the Kensington security system cable between
the TV and a table.
ENGLISH
4-Screws
(Not supplied with TV)
Stand
Desk
Securing TV to the Wall
•• Screw: M5 x L (*L: Table depth + 8~10 mm)
ex) Table depth: 15 mm, Screw: M5 x L25
B type
(Depending on model)
1 Insert and tighten the eye-bolts or TV brackets and bolts on the back
of the TV.
-- If there are bolts inserted at the eye-bolts position, remove the
bolts first.
2 Mount the wall brackets with the bolts to the wall. Match the location
of the wall bracket and the eye-bolts on the rear of the TV.
2-Screws for Stand Fixing,
2-Washers for Stand Fixing,
2-Nuts for Stand Fixing
(Supplied with TV)
3 Connect the eye-bolts and wall brackets tightly with a sturdy rope or
cable. Make sure to keep the rope parallel to the flat surface.
Stand
Desk
6
•• Use a platform or cabinet that is strong and large enough to support
the TV securely.
•• Brackets, bolts, and ropes are optional. You can obtain additional
accessories from your local dealer.
Mounting on a Wall
ENGLISH
Attach an optional wall mount bracket at the rear of the TV carefully
and install the wall mount bracket on a solid wall perpendicular to the
floor. When you attach the TV to other building materials, please contact
qualified personnel. LG recommends that wall mounting be performed
by a qualified professional installer. We recommend the use of LG’s wall
mount bracket. LG’s wall mount bracket is easy to move with cables
connected. When you do not use LG’s wall mount bracket, please use a
wall mount bracket where the device is adequately secured to the wall
with enough space to allow connectivity to external devices. It is advised
to connect all the cables before installing fixed wall mounts.
10 cm
10 cm
10 cm
10 cm
10 cm
(Depending on model)
•• Do not use a sharp object when you detached the cable
cover. This could damage the cable or the cabinet. It may
also cause personal harm. (Depending on model)
•• When installing the wall mounting bracket, it is recommended to
cover the stand hole using tape, in order to prevent the influx of dust
and insects. (Depending on model)
(Depending on model)
•• Remove the stand before installing the TV on a wall mount
by performing the stand attachment in reverse.
•• For more information of screws and wall mount bracket,
refer to the Separate purchase.
•• If you intend to mount the product to a wall, attach VESA
standard mounting interface (optional parts) to the back
of the product. When you install the set to use the wall
mounting bracket (optional parts), fix it carefully so as
not to drop.
•• When mounting a TV on the wall, make sure not to install
the TV by hanging the power and signal cables on the back
of the TV.
•• Do not install this product on a wall if it could be exposed
to oil or oil mist. This may damage the product and cause
it to fall.
Stand hole
7
Connections
Connect various external devices to the TV and switch input modes to
select an external device. For more information of external device’s
connection, refer to the manual provided with each device.
Antenna/Cable
ENGLISH
Connect the TV to a wall antenna socket with an RF cable (75 Ω).
•• Use a signal splitter to use more than 2 TVs.
•• If the image quality is poor, install a signal amplifier properly to
improve the image quality.
•• If the image quality is poor with an antenna connected, try to realign
the antenna in the correct direction.
•• An antenna cable and converter are not supplied.
•• For a location that is not supported with ULTRA HD broadcasting, this
TV cannot receive ULTRA HD broadcasts directly. (Depending on model)
Other connections
Connect your TV to external devices. For the best picture and audio
quality, connect the external device and the TV with the HDMI cable.
Some separate cable is not provided.
HDMI
•• Supported HDMI Audio format:
(Depending on model)
DTS (44.1 kHz / 48 kHz / 88.2 kHz / 96 kHz),
DTS HD (44.1 kHz / 48 kHz / 88.2 kHz / 96 kHz / 176.4 kHz / 192 kHz),
Dolby Digital / Dolby Digital Plus (32 kHz / 44.1 kHz / 48 kHz),
PCM (32 kHz / 44.1 kHz / 48 kHz / 96 kHz / 192 kHz)
••
( ) [Picture] [Additional
Settings] [HDMI ULTRA HD Deep Colour]
On: Support 4K @ 50/60 Hz (4:4:4, 4:2:2, 4:2:0)
Off: Support 4K @ 50/60 Hz 8 bit (4:2:0)
If the device connected to Input Port also supports ULTRA HD Deep
Colour, your picture may be clearer. However, if the device doesn’t
support it, it may not work properly. In that case, change the TV’s
[HDMI ULTRA HD Deep Colour] setting to Off.
8
USB
Some USB Hubs may not work. If a USB device connected through a USB
Hub is not detected, connect it directly to the USB port on the TV.
•• Use USB 1 port when connecting a webcam. USB 2 port may not
support some webcam. (Depending on model)
•• It is recommended that you use a USB hub or USB HDD with a power
supply. (If the power supplied is not sufficient, the USB storage device
may not be detected properly.)
•• It is recommended that you use an external USB HDD with a rated
voltage of 5 V of less and a rated current of 500 mA or less.
External Devices
Available external devices are: Blu-ray player, HD receivers, DVD players,
VCRs, audio systems, USB storage devices, PC, gaming devices, and other
external devices.
•• The external device connection may differ from the model.
•• Connect external devices to the TV regardless of the order of the TV
port.
•• Refer to the external equipment’s manual for operating instructions.
•• If you connect a gaming device to the TV, use the cable supplied with
the gaming device.
•• In PC mode, there may be noise associated with the resolution, vertical
pattern, contrast or brightness. If noise is present, change the PC
output to another resolution, change the refresh rate to another rate
or adjust the brightness and contrast on the PICTURE menu until the
picture is clear.
•• In PC mode, some resolution settings may not work properly
depending on the graphics card.
•• If ULTRA HD content is played on your PC, video or audio may become
disrupted intermittently depending on your PC’s performance.
(Depending on model)
•• When connecting via a wired LAN, it is recommended to use a CAT 7
cable. (Only when
port is provided.)
External Speakers
Method of volume control port
(Depending on model)
•• Cable Spec.
Each Up / Down pin is pulled
to 3.3 V with CPU GPIO.
GND / UP / DOWN
VOLUME
CONTROL
ENGLISH
EXTERNAL
SPEAKER OUT
or
STEREO
(8 )
CPU detects transition
from 3.3 V to GND level for
volume control.
Control port for Speaker out
+
UP
-
DOWN
GND
RIGHT
LEFT
GND
: Depending on model
•• Use only with the 3 Pole 3.5 mm Stereo Jack.
•• Do not connect your headphones or earphones to the port for
connecting an external speaker.
9
Using the Button
Network setup
(Depending on model)
You can simply operate the TV functions, using the button.
Wired network connection
ENGLISH
This TV can be connected to a Pro:Centric server via the
port. After
making the physical connection, the TV needs to be set up for network
communication.
Connect the
port of the Modem or Router from Pro:Centric server to
the
port on the TV.
Basic Functions
2
Power On (Press)
Power Off (Press and Hold)
Menu Control (Press1)
Menu Selection (Press and Hold2)
1
Broadband Modem
1 You can access and adjust the menu by pressing the button when
TV is on.
Pro:Centric Server
Router
Broadband Modem
2 You can use the function when you access menu control.
Adjusting the Menu
Broadband Modem
When the TV is turned on, press the
the Menu items using the button.
button one time. You can adjust
Turns the power off.
Changes the input source.
Pro:Centric Server
Scrolls through the saved programmes.
Adjusts the volume level.
1 Connect the
the TV.
port of the Modem or Router to the
port on
2 Connect the
port of the PC to the
port on the TV.
(Depending upon model)
•• Do not connect a modular phone cable to the
port.
•• Since there are various connection methods, please follow the
specifications of your telecommunication carrier or internet service
provider.
10
Adjusting the Angle of the
TV to suit view
(Depending on model)
Swivel 20 degrees to the left or right and adjust the angle of the TV to
suit your view.
ENGLISH
20˚
20˚
•• When adjusting the angle of the product, watch out for your
fingers.
-- Personal injury may occur if hands or fingers are pinched. If
the product is tilted too much, it may fall, causing damage
or injury.
Using Remote Control
The descriptions in this manual are based on the buttons on the remote
control. Please read this manual carefully and use the TV correctly.
To replace batteries, open the battery cover, replace
batteries (1.5 V AAA) matching the and ends to the label inside
the compartment, and close the battery cover. To remove the batteries,
perform the installation actions in reverse.
Make sure to point the remote control toward the remote control sensor
on the TV.
(Some buttons and services may not be provided depending on models
or regions.)
11
* To use the button, press and hold for more than 3 seconds.
(Power) Turns the TV on or off.
Adjusts the brightness of the
ENGLISH
screen to reduce energy consumption.
Shows the previous history.
Changes the input source.
Selects Radio, TV, and DTV programme.
Number buttons Enters numbers.
Accesses the saved channel list.
Tunes to the last channel viewed.
Adjusts the volume level.
Selects a smart menu.
Not functional.
Mutes all sounds.
* Accesses the [Accessibility] menu.
Scrolls through the saved channels.
Moves to the previous or next screen.
Shows programme guide.
Accesses the main menu.
Displays and removes Pro:Centric Application.
Navigation buttons (up/down/left/right) Scrolls through menus or
options.
Selects menus or options and confirms your input.
Returns to the previous screen.
Views the information of the current programme
and screen.
Clears all on-screen displays and returns to TV viewing.
,
,
,
These access special functions in some menus.
Control buttons for media contents
Activates your preferred subtitle in digital mode.
•• Do not mix new batteries with old batteries. This may cause
the batteries to overheat and leak.
•• Failure to match the correct polarities of the battery may
cause the battery to burst or leak, resulting in fire, personal
injury, or ambient pollution.
•• This apparatus uses batteries. In your community there
might be regulations that require you to dispose of these
batteries properly due to environmental considerations.
Please contact your local authorities for disposal or
recycling information.
•• The product's internal and external batteries should not
be exposed to excessive heat such as direct sunlight, fire,
or the like.
•• In Analogue TV and some countries, some remote control
buttons may not work.
12
Troubleshooting
The software version can be updated for improvement in performance.
Customer needs to ensure the compatibility of customer’s equipment
with LGE software. If needed, please consult with LGE and upload revised
software version according to the guidance provided by LGE.
Cannot control the TV with the remote control.
•• Cannot control the TV with the remote control.
-- Check if anything such as tape has been placed over the receiver.
-- Check if there is any obstacle between the product and the remote
control.
-- Replace the batteries with new fresh ones.
•• No image display and no sound is produced.
-- Check if the product is turned on.
-- Check if the power cord is connected to a wall outlet.
-- Check if there is a problem in the wall outlet by connecting other
products.
Abnormal display
•• If the product feels cold to the touch, there may be a small “flicker”
when it is turned on. This is normal, there is nothing wrong with
product.
•• This panel is an advanced product that contains millions of pixels.
You may see tiny black dots and/or brightly coloured dots (red, blue
or green) at a size of 1 ppm on the panel. This does not indicate a
malfunction and does not affect the performance and reliability of the
product. This phenomenon also occurs in third-party products and is
not subject to exchange or refund.
•• You may find different brightness and colour of the panel depending
on your viewing position(left/right/top/down). This phenomenon
occurs due to the characteristic of the panel. It is not related with the
product performance, and it is not malfunction.
•• Displaying a still image for a prolonged period of time may cause
image sticking. Avoid displaying a fixed image on the TV screen for a
long period of time.
Generated sound
•• “Cracking” noise: A cracking noise that occurs when watching or
turning off the TV is generated by plastic thermal contraction due to
temperature and humidity. This noise is common for products where
thermal deformation is required.
•• Electrical circuit humming/panel buzzing: A low level noise is
generated from a high-speed switching circuit, which supplies a large
amount of current to operate a product. It varies depending on the
product. This generated sound does not affect the performance and
reliability of the product.
•• When cleaning the product, be careful not to allow any liquid
or foreign objects to enter the gap between the upper, left
or right side of the panel and the guide panel. (Depending
on model)
•• Make sure to wring any excess water or cleaner from the
cloth.
•• Do not spray water or cleaner directly onto the TV screen.
•• Make sure to spray just enough of water or cleaner onto a dry
cloth to wipe the screen.
13
ENGLISH
•• The TV turns off suddenly.
-- Check the power control settings. The power supply may be
interrupted.
-- Check if the auto-off function is activated on the settings related
time.
-- If there is no signal while the TV is on, the TV will turn off
automatically after 15 minutes of inactivity.
•• When connecting to the PC (HDMI), no signal is detected.
-- Turn the TV off/on using the remote control.
-- Reconnect the HDMI cable.
-- Restart the PC with the TV on.
Specifications
The annual energy consumption indicated on the energy label is measured in accordance with IEC 62087 and the Hong Kong Energy Efficiency Labelling
Scheme (EELS) (Depending on model).
The actual energy consumption depends on the usage environment (the content watched, TV settings, etc.).
ENGLISH
Television system
programme coverage (Band)
Broadcasting Specifications
Digital TV
DTMB, DVB-C
Analogue TV
PAL D/K/B/G/I, NTSC-M
PAL D/K: VHF/UHF 1 ~ 62, Cable 1~41
PAL B/G/I: VHF/UHF 1 ~ 69, Cable 1 ~ 47
NTSC-M: VHF/UHF 2 ~ 78, Cable 1 ~ 71
DTMB: 1 ~ 62
DVB-C: 52.5 MHz ~ 866 MHz
External antenna impedance
75 Ω
Wireless module (LGSBWAC92) specifications
Wireless LAN (IEEE 802.11a/b/g/n/ac)
Frequency Range
Output Power (Max.)
2400 to 2483.5 MHz
5150 to 5350 MHz
5725 to 5850 MHz
18 dBm
18 dBm
12 dBm
Bluetooth
Frequency Range
Output Power (Max.)
2400 to 2483.5 MHz
8 dBm
•• As band channels can vary per country, the user cannot change or adjust the operating frequency. This product is configured for the regional frequency
table.
•• For consideration of the user, this device should be installed and operated with a minimum distance of 20 cm between the device and the body.
Environment condition
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
14
0 °C to 40 °C
Less than 80 %
-20 °C to 60 °C
Less than 85 %
HDMI-DTV supported mode
Resolution
640 x 480p
720 x 480p
1280 x 720p
1920 x 1080i
1920 x 1080p
3840 x 2160p
4096 x 2160p
Vertical Frequency
(Hz)
59.94
60
59.94
60
50
59.94
60
50
50
59.94
60
23.97
24
29.97
30
50
59.94
60
100
119.88
120
23.98
24
25
29.97
30
50
59.94
60
23.98
24
25
29.97
30
50
59.94
60
•• PC audio is not supported.
•• Use HDMI IN 1 for PC mode. (Depending on model)
Resolution
Horizontal
Frequency (kHz)
Vertical Frequency
(Hz)
640 x 350
31.46
70.09
720 x 400
31.46
70.08
640 x 480
31.46
59.94
800 x 600
37.87
60.31
1024 x 768
48.36
60
1360 x 768
47.71
60.01
1152 x 864
54.34
60.05
1280 x 1024
63.98
60.02
1920 x 1080
67.5
134.86
135
60
119.88
120
2560 x 1440
88.78
59.95
3840 x 2160
53.95
54
56.25
61.43
67.5
112.5
134.86
135
23.98
24
25
29.97
30
50
59.94
60
4096 x 2160
53.95
54
56.25
61.43
67.5
112.5
134.86
135
23.98
24
25
29.97
30
50
59.94
60
ENGLISH
720 x 576p
Horizontal
Frequency (kHz)
31.46
31.5
31.47
31.5
31.25
44.96
45
37.5
28.12
33.72
33.75
26.97
27
33.71
33.75
56.25
67.43
67.5
112.5
134.86
135
53.95
54
56.25
61.43
67.5
112.5
134.86
135
53.95
54
56.25
61.43
67.5
112.5
134.86
135
HDMI-PC supported Mode
15
Component port connecting
information
Component ports on the TV
Video output ports on DVD player
Supported Audio Formats
ENGLISH
Info
Bit rate
32 Kbps - 320 Kbps
Sample freq.
16 kHz - 48 kHz
Support
MPEG1, MPEG2
Cr
Channels
mono, stereo
Pr
Bit rate
-
Sample freq.
8 kHz - 96 kHz
PB
PR
Y
PB
PR
Y
B-Y
R-Y
Y
Cb
Y
Pb
Signal
Component
480i / 576i
O
480p / 576p
O
720p / 1080i
O
1080p
O
File
Format
Item
Y
.mp3
.wav
.ogg
Supported Photo Formats
File
Format
.jpeg, .jpg,
.jpe
16
Format
JPEG
Resolution
Minimum: 64 (W) x 64 (H)
Maximum (Normal Type): 15360 (W) x
8640 (H)
Maximum (Progressive Type): 1920 (W)
x 1440 (H)
.png
PNG
Minimum: 64 (W) x 64 (H)
Maximum: 5760 (W) x 5760 (H)
.bmp
BMP
Minimum: 64 (W) x 64 (H)
Maximum: 1920 (W) x 1080 (H)
.wma
.flac
Support
PCM
Channels
mono, stereo
Bit rate
64 kbps - 320 kbps
Sample freq.
8 kHz - 48 kHz
Support
Vorbis
Channels
mono, stereo
Bit rate
128 kbps - 320 kbps
Sample freq.
8 kHz - 48 kHz
Support
WMA
Channels
up to 6 ch
Bit rate
-
Sample freq.
8 kHz - 96 kHz
Support
FLAC
Channels
mono, stereo
•• The number of supported programmes may vary depending on the
sample frequency.
Supported Video Formats
Extension
.asf
.wmv
Codec
VC-1 Advanced Profile (except for WMVA),
VC-1 Simple and Main Profiles
Audio
WMA Standard (except for WMA v1/WMA
Speech)
Video
Xvid (except for 3 warp-point GMC),
H.264/AVC, Motion Jpeg, MPEG-4
Audio
MPEG-1 Layer I, II, MPEG-1 Layer III (MP3),
Dolby Digital, LPCM, ADPCM, DTS
Video
H.264/AVC, MPEG-4, HEVC
Audio
Dolby Digital, Dolby Digital Plus, AAC,
MPEG-1 Layer III (MP3), Dolby AC-4
Video
H.264/AVC, MPEG-4
.avi
.mp4
.m4v
.mov
.3gp
.3g2
Audio
AAC, AMR-NB, AMR-WB
Video
MPEG-2, MPEG-4, H.264/AVC, VP8, VP9,
HEVC
Audio
Dolby Digital, Dolby Digital Plus, AAC,
PCM, DTS, MPEG-1 Layer I, II, MPEG-1
Layer III (MP3)
Video
H.264/AVC, MPEG-2, HEVC
Audio
MPEG-1 Layer I, II, MPEG-1 Layer III (MP3),
Dolby Digital, Dolby Digital Plus, AAC,
PCM, Dolby AC-4
Video
MPEG-1, MPEG-2
Audio
MPEG-1 Layer I, II, MPEG-1 Layer III (MP3)
Video
MPEG-1, MPEG-2
Audio
Dolby Digital, MPEG-1 Layer I, II, DVDLPCM
Video
RV30, RV40
Audio
Realaudio6 (cook), AAC LC, HE-AAC
.mkv
.ts
.trp
.tp
.mts
.mpg
.mpeg
.dat
.vob
.rm
.rmvb
•• ULTRA HD Video: 3840 x 2160, 4096 x 2160
•• Some HEVC encoded ULTRA HD videos other than the content officially
provided by LG Electronics may not be played.
•• Some codecs can be supported after a software upgrade.
File
Format
.mkv
.mp4
.ts
Codec
Video
Audio
H.264/AVC, HEVC
ENGLISH
Video
Cautions for Video Playback
Dolby Digital, Dolby Digital Plus, AAC
Supported External Subtitles
Subtitle
Format
External
Subtitle
*.smi, *.srt, *.sub (MicroDVD, SubViewer 1.0/2.0),
*.ass, *.ssa, *.txt (TMPlayer), *.psb (PowerDivX),
*.dcs (DLP Cinema)
Embedded
Subtitle
Matroska(mkv): Sub Station Alpha(SSA),
Advanced Sub Station Alpha(ASS), SRT
MP4: Timed Text
17
Key Codes
•• This feature is not available for all models.
Code (Hexa)
ENGLISH
Note
Code (Hexa)
00
R/C Button
44
R/C Button
01
R/C Button
53
R/C Button
02
R/C Button
5B
R/C Button
03
R/C Button
61
(Blue)
R/C Button
(Arrow Key / Right Key)
R/C Button
63
(Yellow)
R/C Button
(Arrow Key / Left Key)
R/C Button
71
(Green)
R/C Button
R/C Button
72
(Red)
R/C Button
R/C Button
8E
(Forward)
R/C Button
(Rewind)
06
07
Function
7C
08
(POWER)
Function
Note
09
R/C Button
8F
0B
R/C Button
AA
R/C Button
0C
R/C Button
AB
R/C Button
R/C Button
AF
R/C Button
1A
R/C Button
B0
(Play)
R/C Button
28
R/C Button
B1
(Stop / File List)
R/C Button
39
R/C Button
B5
10 - 19
Number Key 0 - 9
R/C Button
R/C Button
40
(Arrow Key / Cursor Up)
R/C Button
BA
41
(Arrow Key / Cursor Down)
R/C Button
F0
R/C Button
R/C Button
95
R/C Button
43
(Freeze / Slow Play / Pause)
R/C Button
* Key code 4C (0x4C) is available on ATSC/ISDB models which use major/minor channel. (For South Korea, Japan, North America, Latin America except
Colombia models)
18
External Control Device Setup
•• Image shown may differ from your TV.
Connect the USB to Serial converter/RS-232C input jack to an external control device (such as a computer or an A/V control system) to control the product’s
functions externally.
Note: The type of control port on the TV can be different between model series.
* Please be advised that not all models support this type of connectivity.
ENGLISH
* Cable is not provided.
USB to Serial converter with USB Cable
USB IN
USB Type
(PC)
(PC)
(TV)
(TV)
•• LGTV supports PL2303 chip-based (Vendor ID: 0x0557, Product ID: 0x2008) USB to serial converter which is notRS-232C
made norINprovided by LG.
(CONTROL & SERVICE)
•• It can be purchased from computer stores that carry accessories for IT support professionals.
(TV)
(PC)
RS-232C With RS-232C Cable
1
USBIN
IN
USB
3
SERVICE ONLY
DE9 (D-Sub 9pin) Type
•• You need to purchase
the RS-232C (DE9, D-Sub 9pin female-to-female type) to RS-232C cable required for the connection between
the PC and the TV,
(TV)
(PC)
(PC)
(TV)
(PC)
which is specified
in the manual.
2
•• The connection interface may differ from your TV.
RS-232C IN
RS-232C
IN
(CONTROL
& SERVICE)
(CONTROL & SERVICE)
1
3
RS-232C IN
(CONTROL & SERVICE)
2
11
33
Phone jack Type
(TV)
(TV)
(TV)
(TV)
SERVICEONLY
ONLY
SERVICE
(PC)
(PC)
(PC)
(PC)
(PC)
•• You need to purchase
in the manual.
(TV)
(PC)the phone-jack to RS-232C cable required for the connection between the PC and the TV, which is specified(TV)
4
•• For other models, connect to the USB port.
22
•• The connection interface may differ from your TV.
(PC)
(PC)
(PC)
1
1
3
3
RS-232C IN
4
(CONTROL & SERVICE)
2
2
RS-232C
IN
RS-232C
IN
(CONTROL
& SERVICE)
(TV)
(TV)
(TV)
(CONTROL & SERVICE)
19
RS-232C IN
RS-232C
IN
(CONTROL
& SERVICE)
(CONTROL & SERVICE)
Type of connector: D-Sub 9-Pin male
1
5
RS-232C (Serial port)
ENGLISH
6
9
RS-232C Configurations
7-Wire Configurations (Standard RS-232C cable)
3-Wire Configurations (Not standard)
PC
TV
PC
TV
RXD
2
3
TXD
RXD
2
3
TXD
TXD
3
2
RXD
TXD
3
2
RXD
GND
5
5
GND
GND
5
5
GND
DTR
4
6
DTR
DTR
4
6
DTR
DSR
6
4
DSR
DSR
6
4
DSR
RTS
7
8
RTS
RTS
7
8
RTS
8
7
CTS
CTS
8
7
CTS
D-Sub 9
D-Sub 9
D-Sub 9
D-Sub 9
CTS
Set ID
For Set ID number, see “Real Data Mapping”.
1 Press
( ) to access the main menus.
2 Press the Navigation buttons to scroll to [General] and press
3 Press the Navigation buttons to scroll to [Set ID] and press
4 Scroll left or right to select a set ID number and press
5 When you are finished, press
20
.
.
.
. The adjustment range is 1-99.
Communication Parameters
•• Baud rate: 9600 bps (UART)
•• Data length: 8 bits
•• Parity: None
•• Stop bit: 1 bit
•• Communication code: ASCII code
•• Use a crossed (reverse) cable.
Command reference list
ENGLISH
(Depending on model)
Command1
Command2
Data
(Hexadecimal)
1 Power
k
a
00 to 01
2 [Aspect Ratio]
k
c
(p. 22)
3 Screen Mute
k
d
(p. 23)
4 Volume Mute
k
e
00 to 01
5 Volume Control
k
f
00 to 64
6 [Contrast]
k
g
00 to 64
7 [Brightness]
k
h
00 to 64
8 [Colour]
k
i
00 to 64
9 [Tint]
k
j
00 to 64
10 [Sharpness]
k
k
00 to 32
11
Select
k
l
00 to 01
12 Remote Control Lock Mode
k
m
00 to 01
13 [Balance]
k
t
00 to 64
14 Colour Temperature
x
u
00 to 64
15 [Energy Saving]
j
q
(p. 25)
16 [Auto Configuration]
j
u
01
17 [Equalizer]
j
v
(p. 25)
18 Tune Command
m
a
(p. 26)
19 Programme [Skip]/[Add]
m
b
00 to 01
20 Key
m
c
(p. 26)
21 Control [Backlight]
m
g
00 to 64
22 [Input] select
x
b
(p. 27)
* Note: During playing media, all commands except Power (ka) and Key (mc) are not executed and treated as NG. With RS232C cable, TV can communicate
“ka command” in power-on or power-off status. but with USB-to-Serial converter cable, the command works only if TV is on.
21
Transmission / Receiving Protocol
1 Power (Command: k a)
(Depending on Model)
►►To control Power On/Off of the set.
Transmission
ENGLISH
(Command1)(Command2)( )([Set ID])( )([Data])(Cr)
(Command1): First command to control the TV. (j, k, m or x)
(Command2): Second command to control the TV.
([Set ID]): You can adjust the set ID to choose desired monitor ID number
in option menu. Adjustment range is 1 to 99. When selecting Set ID ‘0’,
every connected set is controlled. Set ID is indicated as decimal (1 to 99)
on menu and as Hexa decimal (0 x 0 to 0 x 63) on transmission/receiving
protocol.
([Data]): To transmit command data. Transmit ‘FF’ data to read status of
command.
(Cr): Carriage Return
ASCII code ‘0 x 0D’
( ): ASCII code ‘space (0 x 20)’
OK Acknowledgement
(Command2)( )([Set ID])( )(OK)([Data])(x)
* The set transmits ACK (acknowledgement) based on this format when
receiving normal data. At this time, if the data is data read mode, it
indicates present status data. If the data is data write mode, it returns
the data of the PC computer.
Error Acknowledgement
(Command2)( )([Set ID])( )(NG)([Data])(x)
* The set transmits ACK (acknowledgement) based on this format when
receiving abnormal data from non-viable functions or communication
errors.
[Data] 00: Illegal Code
Transmission
(k)(a)( )([Set ID])( )([Data])(Cr)
[Data] 00: [Off]
[Data] 01: [On]
Ack
(a)( )([Set ID])( )(OK/NG)([Data])(x)
►►To Show TV is Power On/Off.
Transmission
(k)(a)( )([Set ID])( )(FF)(Cr)
Ack
(a)( )([Set ID])( )(OK/NG)([Data])(x)
* Similarly, if other functions transmit ‘0 x FF’ data based on this format,
Acknowledgement data feed back presents status about each function.
* OK Ack., Error Ack. and other message may display on the screen when
TV is power On.
2 [Aspect Ratio] (Command: k c) (Main Picture Size)
►►To adjust the screen format. (Main picture format) You can also adjust
the screen format using the picture settings.
Transmission
(k)(c)( )([Set ID])( )([Data])(Cr)
[Data] 01: [4:3] (Normal screen - [Just Scan] Off)
[Data] 02: [16:9] (Wide screen - [Just Scan] Off)
[Data] 06: [Original] ([Just Scan] Off)
[Data] 09: [Just Scan]
* Please make sure that the model doesn’t support both Vertical Zoom
and All-Direction Zoom mode.
Ack
(c)( )([Set ID])( )(OK/NG)([Data])(x)
* Using the PC input, you select either 16:9 or 4:3 screen aspect ratio.
22
3 Screen Mute (Command: k d)
6 [Contrast] (Command: k g)
►►To select screen mute on/off.
►►To adjust screen contrast.
You can also adjust contrast in the picture settings.
Transmission
(k)(d)( )([Set ID])( )([Data])(Cr)
Transmission
(k)(g)( )([Set ID])( )([Data])(Cr)
Data Min: 00 to Max: 64
* Refer to "Real data mapping".
Ack
Ack
(d)( )([Set ID])( )(OK/NG)([Data])(x)
(g)( )([Set ID])( )(OK/NG)([Data])(x)
* In case of video mute on only, TV will display On Screen Display (OSD).
But, in case of Screen mute on, TV will not display OSD.
7 [Brightness] (Command: k h)
4 Volume Mute (Command: k e)
►►To adjust screen brightness.
You can also adjust brightness in the picture settings.
►►To control volume mute on/off.
You can also adjust mute using the mute button on remote control.
Transmission
(k)(e)( )([Set ID])( )([Data])(Cr)
[Data] 00: Volume mute on (Volume off)
[Data] 01: Volume mute off (Volume on)
Ack
(e)( )([Set ID])( )(OK/NG)([Data])(x)
5 Volume Control (Command: k f)
Transmission
(k)(h)( )([Set ID])( )([Data])(Cr)
Data Min: 00 to Max: 64
* Refer to "Real data mapping".
Ack
(h)( )([Set ID])( )(OK/NG)([Data])(x)
8 [Colour] (Command: k i)
►►To adjust the screen colour.
You can also adjust colour in the picture settings.
►►To adjust volume.
You can also adjust volume with the volume buttons on remote
control.
Transmission
Transmission
[Data] Min: 00 to Max: 64
* Refer to "Real data mapping".
(k)(f)( )([Set ID])( )([Data])(Cr)
[Data] Min: 00 to Max: 64
* Refer to "Real data mapping".
ENGLISH
[Data] 00: Screen mute off (Picture on) / Video mute off
[Data] 01: Screen mute on (Picture off)
[Data] 10: Video mute on
(k)(i)( )([Set ID])( )([Data])(Cr)
Ack
(i)( )([Set ID])( )(OK/NG)([Data])(x)
Ack
(f)( )([Set ID])( )(OK/NG)([Data])(x)
23
9 [Tint] (Command: k j)
12 Remote Control Lock Mode (Command: k m)
►►To adjust the screen tint.
You can also adjust tint in the picture settings.
►►To lock the front panel controls on the monitor and remote control.
Transmission
(k)(j)( )([Set ID])( )([Data])(Cr)
[Data] Red: 00 to Green: 64
* Refer to "Real data mapping".
ENGLISH
Ack
(j)( )([Set ID])( )(OK/NG)([Data])(x)
10 [Sharpness] (Command: k k)
►►To adjust the screen sharpness.
You can also adjust sharpness in the picture settings.
Transmission
(k)(k)( )([Set ID])( )([Data])(Cr)
[Data] Min: 00 to Max: 32
* Refer to "Real data mapping".
Ack
(k)( )([Set ID])( )(OK/NG)([Data])(x)
11 OSD Select (Command: k l)
►►To select OSD (On Screen Display) on/off when controlling remotely.
Transmission
(k)(l)( )([Set ID])( )([Data])(Cr)
[Data] 00: [Off]
[Data] 01: [On]
Ack
(l)( )([Set ID])( )(OK/NG)([Data])(x)
Transmission
(k)(m)( )([Set ID])( )([Data])(Cr)
[Data] 00: [Off]
[Data] 01: [On]
Ack
(m)( )([Set ID])( )(OK/NG)([Data])(x)
* If you are not using the remote control, use this mode. When main
power is on/off, external control lock is released.
* In the standby mode, if key lock is on, TV will not turn on by power on
key of IR & Local Key.
13 [Balance] (Command: k t)
►►To adjust balance.
You can also adjust balance in the audio settings.
Transmission
(k)(t)( )([Set ID])( )([Data])(Cr)
[Data] L: 00 to R: 64
* Refer to "Real data mapping".
Ack
(t)( )([Set ID])( )(OK/NG)([Data])(x)
14 [Colour Temperature] (Command: x u)
►►To adjust Colour Temperature. You can also adjust Colour Temperature
in the picture settings.
Transmission
(x)(u)( )([Set ID])( )([Data])(Cr)
[Data] Warm: 00 to Cool:64
* Refer to "Real data mapping".
Ack
(u)( )([Set ID])( )(OK/NG)([Data])(x)
24
15 [Energy Saving] (Command: j q)
17 [Equalizer] (Command: j v)
►►To reduce the power consumption of the TV. You can also adjust
Energy Saving in picture settings.
►►To adjust equalizer.
Transmission
Transmission
(j)(v)( )([Set ID])( )([Data])(Cr)
(j)(q)( )([Set ID])( )([Data])(Cr)
MSB
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Level
Low
Power
Low
Power
Low
Power
Low
Power
Low
Power
Low
Power
2
1
0
0
0
0
0
[Off]
0
0
0
1
[Minimum]
0
0
0
0
1
1
0
Description
3
0
0
0
0
[Medium]
[Maximum]
0
1
0
1
[Screen Off]
0
1
0
0
[Auto]
►►[Auto] is available in TV that supports ‘Intelligent Sensor’.
7 6 5
Frequency
0 0 0
1 Band
st
0
0
0
Data
Frequency
0
1
LSB
ENGLISH
Power Saving
Function
7 6 5 4
4 3 2 1 0
Step
0
0
0 0 0
0 (decimal)
0
0 0 1
1 (decimal)
0 0 1
2 Band
0
0 1 0
3rd Band
... ... ... ... ...
0 1 1
4 Band
1
0
0 1 1
19 (decimal)
1 0 0
5th Band
1
0
1 0 0
20 (decimal)
nd
th
...
Ack
(v)( )([Set ID])( )(OK/NG)([Data])(x)
Ack
(q)( )([Set ID])( )(OK/NG)([Data])(x)
16 [Auto Configuration] (Command: j u) (Only RGB support
model)
►►To adjust picture position and minimize image shaking automatically.
It works only in RGB (PC) mode.
Transmission
(j)(u)( )([Set ID])( )([Data])(Cr)
[Data] 01: To set
Ack
(u)( )([Set ID])( )(OK/NG)([Data])(x)
25
18 Tune Command (Command: m a)
19 Programme [Skip]/[Add] (Command: m b)
►►Select channel to following physical number.
►►To set skip status for the current Programme.
Transmission
Transmission
(m)(a)( )([Set ID])( )([Data] 00)( )([Data] 01)( )([Data] 02)(Cr)
ENGLISH
[Data] 00: High channel data
[Data] 01: Low channel data
ex. No. 47 00 2F (2FH)
No. 394 01 8A (18AH),
DTV No. 0 Don’t care
[Data] 02: (Antenna)
0 x 00: Analogue Main
0 x 10: DTV Main
0 x 20: Radio
(Cable)
0 x 80: Analogue Main
0 x 90: DTV Main
0 x A0: Radio
(Satellite) (Depending on model)
0 x 40: DTV Main
0 x 50: Radio Main
Channel data range
Min: 00 Max: 270F (0 to 9999)
Ack
(a)( )([Set ID])( )(OK/NG)([Data])(x)
(m)(b)( )([Set ID])( )([Data])(Cr)
[Data] 00: [Skip]
[Data] 01: [Add]
Ack
(b)( )([Set ID])( )(OK/NG)([Data])(x)
20 Key (Command: m c)
►►To send IR remote key code.
Transmission
(m)(c)( )([Set ID])( )([Data])(Cr)
[Data]
Key Codes
Ack
(c)( )([Set ID])( )(OK/NG)([Data])(x)
21 Control [Backlight] (Command: m g)
►►To control the backlight.
Transmission
(m)(g)( )([Set ID])( )([Data])(Cr)
[Data] Min: 00 to Max: 64
Ack
(g)( )([Set ID])( )(OK/NG)([Data])(x)
26
22 [Input] select (Command: x b) (Main Picture Input)
* Real data mapping
00:
Step 0
►►To select input source for main picture.
Transmission
(x)(b)( )([Set ID])( )([Data])(Cr)
[Data]
Structure
MSB
0
0
0
0
External Input
0
0
0
Step 10 ([Set ID] 10)
F:
10:
Step 15 ([Set ID] 15)
Step 16 ([Set ID] 16)
64:
Step 100
6E:
Step 110
73:
74:
Step 115
Step 116
CF:
Step 199
FE:
FF:
Step 254
Step 255
ENGLISH
0
LSB
A:
Input Number
External Input
Data
0
0
0
0
[DTV]
0
0
0
1
Analogue
0
0
1
0
[AV]
0
1
0
0
[Component]
0
1
1
0
RGB
0
1
1
1
1
0
0
0
1
0
0
1
1
0
1
0
Input Number
[HDMI]
Data
0
0
0
0
Input1
0
0
0
1
Input2
0
0
1
0
Input3
0
0
1
1
Input4
Ack
(b)( )([Set ID])( )(OK/NG)([Data])(x)
27
IR OUT Using Guide
Suitable / Not Recommend remote-controller data format
Item
ENGLISH
Suitable Data Format
Not Recommend Data Format
Data format code
Note
NEC, Toshiba Full Repeat Code Format
Philips RC5, RC6 Code Format
Zenith Code Format
Matsushita, RCA Code Format
Sony 12/15/20 bit, Mitsubishi Code Format
Single: Enable
Repeat: Enable
Single: Enable
Repeat: Disable
Single: Disable
Repeat: Disable
Sharp, JVC, R-step, Philips RCMM, RECS-80, XMP Code Format
IR Receiver specifications
Carrier frequency
Peak Wavelength
Minimum burst length
Minimum gap time is required of
Data word length
Minimum gap time in the data stream is needed of
Parameter
High Level Out Pulse Width
Low Level Out Pulse Width
37.9 KHz
940 nm
Min. 300 us
Min. 350 us
Max. 100 ms
Min. 50 ms
Symbol
Twh
Twl
Conditions
Burst Wave = 600
Period = 1.2
Min
Typ
Max
400
400
-
800
800
Unit
If not use the remote-controller with data formats recommended, IR output signals will be suppressed automatically by IR receiver. In this case, LG
does not guarantee IR working function. To make sure of this matter, here are two methods as below.
•• Use the remote-controller with suitable data formats.
•• Use the IR dongle receiver of the set-top box.
28
Open Source Software
Notice Information
Licenses
Supported licenses may differ by model. For more information about
licenses, visit www.lg.com.
Manufactured under license from Dolby Laboratories. Dolby, Dolby
Vision, Dolby Audio, Dolby Atmos, and the double-D symbol are
trademarks of Dolby Laboratories.
WARNING!
Never place a television set in an unstable location. A television set may
fall, causing serious personal injury or death. Many injuries, particularly
to children, can be avoided by taking simple precautions such as:
•• Using cabinets or stands recommended by the manufacturer of the
television set.
•• Only using furniture that can safely support the television set.
•• Ensuring the television set is not overhanging the edge of the
supporting furniture.
•• Not placing the television set on tall furniture (for example, cupboards
or bookcases) without anchoring both the furniture and the television
set to a suitable support.
•• Not placing the television set on cloth or other materials that may be
located between the television set and supporting furniture.
•• Educating children about the dangers of climbing on furniture to reach
the television set or its controls.
If your existing television set is being retained and relocated, the same
considerations as above should be applied.
Symbols
Refers to alternating current(AC).
Refers to direct current(DC).
Refers to class II equipment.
The terms HDMI and HDMI High-Definition Multimedia Interface,
and the HDMI Logo are trademarks or registered trademarks of HDMI
Licensing Administrator, Inc. in the United States and other countries.
Refers to stand-by.
Refers to “ON” (power).
Refers to dangerous voltage.
For DTS patents, see http://patents.dts.com. Manufactured under
license from DTS Licensing Limited. DTS, the Symbol, & DTS and the
Symbol together, DTS 2.0 Channel, DTS 2.0+Digital Out, DTS-HD, and
DTS Virtual:X are registered trademarks or trademarks of DTS, Inc.
in the United States and/or other countries. © DTS, Inc. All Rights
Reserved.
(Depending upon model)
29
ENGLISH
To obtain the source code under GPL, LGPL, MPL, and other open source
licenses, that is contained in this product, please visit http://opensource.
lge.com. In addition to the source code, all referred license terms,
warranty disclaimers and copyright notices are available for download.
LG Electronics will also provide open source code to you on CD-ROM
for a charge covering the cost of performing such distribution (such
as the cost of media, shipping, and handling) upon email request to
opensource@lge.com. This offer is valid for a period of three years after
our last shipment of this product. This offer is valid to anyone in receipt
of this information.
Regulatory
Record the model number and serial number of the TV.
Refer to the label on the back cover and quote this
information to your dealer when requiring any service.
MODEL
SERIAL NO.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising