LG | GC-B389SLCZ | Owner's Manual | LG GC-B389SLCZ Owner’s Manual

LG GC-B389SLCZ Owner’s Manual
Copyright © 2019 LG Electronics Inc. All Rights Reserved
Setting Wi-Fi
Freezer Compartmet(Optional)
To Reverse the Doors(Optional)
Using LG SmartThinQ Application (Optinoal)
Risk of Fire and Flammable Materials
This symbol alerts you to
flammable materials that can
ignite and cause a fire if you
do not take care.
• This appliance contains a small amount of
isobutane refrigerant (R600a), but it is also
combustible. When transporting and
installing the appliance, care should be
taken to ensure that no parts of the
refrigerating circuit are damaged.
• If a leak is detected, avoid any naked flames
or potential sources of ignition and air the
room in which the appliance is standing for
several minutes. In order to avoid the
creation of a flammable gas air mixture if a
leak in the refrigerating circuit occurs, the
size of the room in which the appliance is
used should correspond to the amount of
refrigerant used. The room must be
1 m² in size for every 8 g of R600a
refrigerant inside the appliance.
• When positioning the appliance, ensure the
supply cord is not trapped or damaged.
• Do not locate multiple portable socket-outlets
or portable power supplies at the rear of
the appliance.
(2 or 3 EA)
(4 or 6 EA)
Dimensions and Clearances
Too small of a distance from adjacent items may result in degradation of freezing capability
and increased electricity costs. Allow over 50mm clearance from each adjacent wall when
installing the appliance.
643 mm
595 mm
1737 mm
27 mm
616 mm
616 mm
1150 mm
970 mm
Setting Wi-Fi
The Wi-Fi button, when used with the LG Smart
ThinQ application, allows the refrigerator to
connect to a home Wi-Fi network.
The Wi-Fi icon shows the status of the
refrigerator’s network connection. The icon
illuminates when the refrigerator is connected to
the Wi-Fi network.
Press and hold the Wi-Fi button for 3 seconds to
connect to the network. The icon blinks while the
connection is being made, then turns on once the
connection is successfully made.
Freezer Compartment (Optional)
If a large quantity of food is to be placed in the
freezer compartment,
The middle drawer of freezer compartment
shall be taken out of the appliance and food
shall be stacked directly on the wire shelf.
Freezer compartment provides wire shelf on
default to maximize food storage capacity. And
also the drawer is provided to convenient usage
for watery meat or half-liquid state food.
Notes for Operation
• If you are leaving the appliance turned off for
an extended period of time, remove all food
and unplug the power cord. Clean the interior,
and leave the doors slightly ajar to prevent
mold from growing in the appliance.
• The automatic defrosting system in the
appliance ensures that the compartment
remains free of ice buildup under normal
operating conditions
1. Before cleaning, make sure that power
supply is switched off;
2. Outside and inside, the refrigerator should
be washed with a clean napkin wetted in
warm water with a liquid detergent.
Then wipe dry with a dry napkin;
3. After cleaning, make sure that the power
cord is not damaged.
Then tightly insert the plug to the power
1. It is prohibited to use abrasive materials,
gasoline, benzene, solvents, hydrochloride,
hot water, hard brushes, etc., which may
damage the refrigerator surface.
2. For products with a stainless steel exterior,
use a clean sponge or soft cloth and a
mildDetergent in warm water.
Do not use abrasive or harsh cleaners.
Dry thoroughly with a Soft cloth.
Do not use appliance wax, bleach, or other
products containing chlorine on stainless
• If there are chill compartments in the
appliance, do not store vegetables and fruits
with higher moisture content in the chill
compartments as they may freeze due to the
lower temperature.
• In the event of a blackout, call the electricity
company and ask how long it is going to last.
− You should avoid door openings while the
power is off.
− When the power supply gets back to normal,
check the condition of the food.
However, when you want to reverse the
doors, you must call to service agent.
Reversing the doors is not covered by the
To Reverse the Doors(Optional)
Your fridge-freezer is designed with reversible
doors,so that they may open from either the left
or right hand side to suit your kitchen design.
Using LG SmartThinQ
Application (Optional)
• If the appliance is having trouble connecting
to the Wi-Fi network, it may be too far from
the router. Purchase a Wi-Fi repeater (range
extender) to improve the Wi-Fi signal strength.
• The Wi-Fi connection may not connect or may
be interrupted because of the home network
• The network connection may not work properly
depending on the Internet service provider.
• The surrounding wireless environment can
make the wireless network service run slowly.
• The appliance cannot be registered due to
problems with the wireless signal transmission.
Unplug the appliance and wait about a minute
before trying again.
• If the firewall on your wireless router is enabled,
disable the firewall or add an exception to it.
• The wireless network name (SSID) should be a
combination of English letters and numbers. (Do
not use special characters.)
• Smartphone user interface (UI) may vary
depending on the mobile operating system (OS)
and the manufacturer.
• If the security protocol of the router is set to
WEP, you may fail to set up the network. Please
change it to other security protocols (WPA2 is
recommended) and register the product again.
• For appliances with the
The LG SmartThinQ application allows you
to communicate with the appliance using a
Before Using LG SmartThinQ
Check the distance between the appliance
and the wireless router (Wi-Fi network).
• If the distance between the appliance and
the wireless router is too far, the signal
strength becomes weak. It may take a long
time to register or installation may fail.
Turn off the Mobile data or Cellular Data on
your smartphone.
• For iPhones, turn data off by going to
Settings → Cellular → Cellular Data.
Connect your smartphone to the wireless
Installing LG SmartThinQ
Search for the LG SmartThinQ application from the
Google Play Store or Apple App Store on a smart
phone. Follow instructions to download and install
the application.
• To verify the Wi-Fi connection, check that Wi-Fi
icon on the control panel is lit.
• The appliance supports 2.4 GHz Wi-Fi networks
only. To check your network frequency, contact
your Internet service provider or refer to your
wireless router manual.
• LG SmartThinQ is not responsible for any
network connection problems or any faults,
malfunctions, or errors caused by network
LG SmartThinQ Application
Re-registering the Appliance or
Registering Another User
Communicate with the appliance from a smart
phone using the convenient smart features.
Press and hold the Wi-Fi button for 3 seconds to
temporarily turn it off. Run the LG SmartThinQ
application and follow the instructions in the
application to register the appliance.
Firmware Update
Keep the appliance performance updated.
Smart Diagnosis™
• To disable the Wi-Fi function, press and hold the
Wi-Fi button for 3 seconds. Wi-Fi icon will be
turned off.
If you use the Smart Diagnosis function, you will
be provided with the useful information such as a
correct way of using the appliance based on the
pattern of use.
Open Source Software Notice
To obtain the source code under GPL, LGPL, MPL,
and other open source licenses, that is contained
in this product, please visit http://opensource.lge.
In addition to the source code, all referred license
terms, warranty disclaimers and copyright notices
are available for download.
LG Electronics will also provide open source code
to you on CD-ROM for a charge covering the cost
of performing such distribution (such as the cost of
media, shipping, and handling) upon email request
to opensource@lge.com. This offer is valid for a
period of three years after our last shipment of this
product. This offer is valid to anyone in receipt of
this information.
Allows you to set various options on the
refrigerator and in the application.
• If you change your wireless router, Internet
service provider, or password, delete the
registered appliance from the LG SmartThinQ
application and register it again.
• The application is subject to change for
appliance improvement purposes without notice
to users.
• Functions may vary by model.
Connecting to Wi-Fi
The Wi-Fi button, when used with the LG
SmartThinQ application, allows the appliance
to connect to a home Wi-Fi network. The Wi-Fi
icon shows the status of the appliance’s network
connection. The icon illuminates when the
appliance is connected to the Wi-Fi network.
Initial Appliance Registration
Run the LG SmartThinQ application and follow
the instructions in the application to register the
• For appliances with the
Open the refrigerator door.
Hold the mouthpiece of your phone in
front of the speaker that is located on the
right hinge of the refrigerator door, when
instructed to do so by the call center.
If the display has been locked for over
5 minutes, you must deactivate the lock
and then reactivate it.
Press and hold the Freezer Temperature
button for three seconds while continuing
to hold your phone to the speaker.
After you hear three beeps, release the
Freezer Temperature button.
Keep the phone in place until the tone
transmission has finished. This takes about
15 seconds, and the display will count
down the time. Once the countdown is
over and the tones have stopped, resume
your conversation with the specialist, who
will then be able to assist you in using the
information transmitted for analysis.
• Find the Wi-Fi network connected to
your smartphone and remove it, then
register your appliance on LG
• Turn off the Mobile data of your
Mobile data for your
smartphone and register the
smartphone is turned on.
appliance using the Wi-Fi network.
• The wireless network name (SSID)
The wireless network name
should be a combination of English
(SSID) is set incorrectly.
letters and numbers. (Do not use
special characters.)
• Only a 2.4 GHz router frequency is
supported. Set the wireless router to
2.4 GHz and connect the appliance
The router frequency is not 2.4
to the wireless router. To check the
router frequency, check with your
Internet service provider or the
router manufacturer.
• If the distance between the
appliance and the router is too far,
The distance between the
the signal may be weak and the
appliance and the router is too
connection may not be configured
correctly. Move the location of the
router so that it is closer to the
The password for the Wi-Fi
that you are trying to connect
to is incorrect.
Your home appliance
and smartphone is
not connected to the
Wi-Fi network.
LG Electronics India Pvt. Ltd.
1800-315-9999, 1800-180-9999
24 hours, 7 days a week (except for national holidays)
WhatsApp No.
Mobile Application
'LG Service India Mobile App' availbable at Google Play
Regd. Office: LG Electronics India Pvt. Ltd., A Wing (3rd Floor), D-3,
District Center, Saket, New Delhi-110017
CIN No. U32107DL1997PTC220109
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF