LG | GL-H432HLHN | Owner's Manual | LG GL-H432HLHN Owner’s Manual

LG GL-H432HLHN Owner’s Manual
ENGLISH
P/NO : MFL71664404
Rev.00_230919
Copyright © 2019 LG electronics Inc. All rights reserved.
IMPORTANT SAFETY INFORMATION ............3
INSTALLATION...............................................10
INNER PARTS ................................................11
OPERATIONS.................................................13
G*-*4**/ G*-*5**
Starting
Before Setting The Temperature
Door Alarm
Self Test
Controls For Freezer Compartment
Controls For Refrigerator Compartment
Express Freeze
Child Lock (Optional)
Wi-Fi
Door Cooling+
Vegetable Drawer
Defrosting
Deodorizer
Ice Making
Hygiene Fresh (Optional)
Water Dispenser (Optional)
Smart Functions
Lamp Replacement
Vacation Time
SUGGESTIONS ON FOOD STORAGE .........23
CLEANING .....................................................24
GENERAL INFORMATION .............................25
IMPORTANT WARNINGS ..............................26
BEFORE CALLING FOR SERVICE ...............27
2
WARNING
Keep ventilation openings, in the appliance enclosure or in
the built-in-structure, clear of obstruction.
Do not use mechanical devices or other means to accelerate
the defrosting process, other than those recommended by the
manufacturer.
Do not damage the refrigerant circuit.
Do not use electrical appliances inside the food storage
compartment, unless they are recommended by the
manufacturer.
The refrigerant and insulation blowing gas used in the
appliance requires special disposal procedures. When
disposal, please consult with services agent or a similarly
qualified person.
3
Risk of Fire and Flammable Materials
This symbol alerts you to flammable materials that can ignite and
cause a fire if you do not take care.
This appliance contains a small amount of isobutane refrigerant
(R600a), but it is also combustible. When transporting and
installing the appliance, care should be taken to ensure that no
parts of the refrigerating circuit are damaged.
If a leak is detected, avoid any naked flames or potential sources of ignition and
air the room in which the appliance is standing for several minutes. In order to
avoid the creation of a flammable gas air mixture if a leak in the refrigerating
circuit occurs, the size of the room in which the appliance is used should
correspond to the amount of refrigerant used. The room must be 1 m2 in size for
every 8 g of R600a refrigerant inside the appliance.
When positioning the appliance, ensure the supply cord is not trapped or
damaged.
Do not locate multiple portable socket-outlets or portable power supplies at the
rear of the appliance.
4
Do not use or store
inflammable materials like
ether, benzene, alcohol,
medicine, LP gas, spray or
cosmetics
near or in the
refrigerator.
It may cause
explosion or fire.
5
Install in places away from the fire
such as the place
where flammable
gas is leaked.
It may cause fire.
If there is a gas leakage (isobutane, propane,
natural gas, etc.), do not touch the appliance
or power plug and ventilate the area
immediately. This appliance uses a refrigerant
gas (isobutane,R600a). Although it uses a
small amount of the gas,
it is still combustible
gas. Gas leakage
during appliance
transport, installation
or operation can
cause fire,
explosion or injury if sparks are caused
6
like gasket
7
Do not place glass containers,
bottles or cans (especially
those containing carbonated
drinks) in the freezer
compartment, shelves or ice
bin that will be exposed to
temperatures below freezing.
Completely empty inside before taking
out the container from the door.
8
Please do not use a dishwasher to clean the lower drawers; the high temperature may cause
damage to the baskets which make them unusable.
If the appliance is equipped with a lock (some countries only), keep the key out of reach of children.
This appliance is intended to be used in household and similar applications such as
- staff kitchen areas in shops, offices and other working environments;
- farm houses and by clients in hotels, motels and other residential type environments;
- bed and breakfast type environments;
- catering and similar non-retail applications.
9
Dimensions and Clearances
Too small of a distance from adjacent items
may result in degradation of freezing capability
and increased electricity costs. Allow over
50mm clearance from each adjacent wall when
installing the appliance.
Image for representation purpose only
-
G*-*5**
A
700
G*-*4**
700
B
1780
1680
C
730
730
D
15
15
E
660
660
F
715
715
G
1035
1035
H
1200
1200
Ambient Temperature
The appliance is designed to operate within a
limited range of ambient temperatures,
depending on the climate zone. do not use the
appliance at a temperature exceeding the limit.
The internal temperatures could be affected by
the location of the appliance, the ambient
temperature, the frequency of door opening
and so on.
The climate class can be found on the rating
label.
5. After installing the appliance, connect the
power plug into a socket outlet. Before
moving and discarding the appliance,
disconnect the plug from the socket outlet.
Climate Class
Ambient Temperture Range 0C
SN (Extended Temperate)
+10 - +32
N (Temperate)
+16 - +32
ST (Subtropical)
+16 - +38
T (Tropical)
+16 - +43/+10 - +43*
*Australia, India, Kenya
NOTE
The appliances rated from SN to T are intended
to be used at an ambient temperature between
100C and 430C
Inverter-On feature (Optional)
Minimum requirement: UPS/ Inverter should be in ON condition having minimum 600VA
capacity along with minimum 120Ah capacity battery connected with the refrigerator’s
power supply socket.
10
Water Dispenser Model
Freezer Temperature
Control Dial
FREEZER
COMPARTMENT
Smart Diagnosis
Lamp
Shelf
Twisting Ice Serve
Type Ice Making
Freezer Door Rack
REFRIGERATOR
COMPARTMENT
Water Tank
Lamp
Deodorizer
Fresh Room Drawer
/Pull Out Tray (Optional)
Shelves
Refrigerator Door
Rack
Hygiene Fresh
(Optional)
Egg Tray
Vegetable Drawer
Levelling Screw
- The automatic defrosting system in the appliance ensures that the compartment remains free of ice
build up under normal operating conditions
11
Non Water Dispenser Model
Freezer Temperature
Control Dial
FREEZER
COMPARTMENT
Smart Diagnosis
Lamp
Shelf
Twisting Ice Serve
Type Ice Making
Freezer Door Rack
REFRIGERATOR
COMPARTMENT
Lamp
Deodorizer
Refrigerator Door
Rack
(Optional)
Fresh Room Drawer
/Pull Out Tray (Optional)
Shelves
Hygiene Fresh
(Optional)
Refrigerator Door
Rack
Vegetable Drawer
Egg Tray
Levelling Screw
- The automatic defrosting system in the appliance ensures that the compartment remains free of ice
build up under normal operating conditions
12
STARTING
BEFORE SETTING THE TEMPERATURE
‘3’ or ‘4’.
‘5’.
DOOR ALARM
SELF TEST
CONTROLS FOR FREEZER COMPARTMENT
When the freezer compartment is not cold enough in winter, adjust the control for the freezer to
High (6~8).
13
CONTROLS FOR REFRIGERATOR COMPARTMENT
FOR INTERNAL CONTROLLER MODEL
REF. TEMP CONTROL
COLD
COLDEST
Ref. Temp Control Button
The default setting of the temperature control button
for the refrigerator compartment is NORMAL.
To control the refrigerator temperature, press the REF.
TEMP CONTROL button.
Whenever pressing the button, LED emitting the light.
The temperature is set in 7 steps, from COLD to
COLDEST cooling. (COLD = warmest, COLDEST =
coldest temperature)
FOR EXTERNAL CONTROLLER MODEL
Display graphic can be different, depend on the type of your refrigerator.
For non-dual display
For dual display
Press ‘FRIDGE’ button to control refrigerator temperature.
Whenever pressing the button, the LED emits light.
Press ‘Hygiene Fresh’ button to operate hygiene fresh motor (optional).
0
- Press a button, Fridge temperature will be down each 1OC
- Press b button, Hygiene Fresh motor will be on, power mode, off.
EXPRESS FREEZE*
When the refrigerator is first turned ON the EXPRESS FREEZE feature can be turn ON. The
compressor and circulating fan operate at maximum cooling capacity to quickly lower the refrigerator
temperature. It shuts off automatically.
For non-dual display
For dual display
• If warm food is placed into the refrigerator, FAST FREEZING can be started with the button on the control
panel. FAST FREEZING will shut off when the temperature reaches the proper level or it can be shut off
manually by pressing the FAST FREEZING button.
14
CHILD LOCK (OPTIONAL)*
• CHILD LOCK
Press and hold the child lock button for 3 seconds to lock the child lock. When it is locked, the Lock LED
will be on and the other button will not operate. To unlock, press and hold the CHILD LOCK button for 3
seconds again.
For non-dual display
For dual display
Wi-Fi*
This sets the refrigerator to connect to your home's Wi-Fi network.
For non-dual display
For dual display
DOOR COOLING+
If water of foreign substances enter the cool air vent while
cleaning, efficiency will be lowered.
VEGETABLE DRAWER
How to use
Vegetable drawer can be used through the control of knob.
Check the position of knob prior to store the food.
Do not locate the knob on the middle point.
* This feature will be OFF by itself, if the refrigerator is switched OFF.
15
DEFROSTING
DEODORIZER
ICE MAKING
Twisting Ice Serve Type
To make ice cubes, fill the ice tray with water and insert
in its position.
To remove ice cubes, hold the lever of the tray and pull
turn gently. Then, ice cubes drop in to the ice cube box.
WARNING
Fill with potable water only.
E
NOT
You can disassemble the Ice Maker to
secure space in the freezer.
Ice Trays
Ice Cube Box
Twisting Ice Serve Type: Remove 1 and 2
1. Ice Tray
2. Ice Cube Box
1
WARNING
2
Do not use anything other than water.
Fill the water up to the marked line.
<Twisting Ice Serve Type>
16
HYGIENE FRESH (OPTIONAL)
CAUTION
Before installing or using the product, make sure to read the owner's manual carefully to
use the product accurately as intended. This HYGIENE FRESH filter has the
antibacterial function of removing the virus or bacteria inside the refrigerator and the
deodorizer function to remove the scent.
Switch over to use mode
Switch over to use mode.
button on the display panel on the
• To use the HYGIENE FRESH filter, touch the
front side of the door and switch over to the AUTO or POWER mode.
(Whenever you touch the button, the HYGIENE FRESH filter will be switched to
AUTO
POWER
OFF AUTO.)
AUTO
POWER
OFF
AUTO
CAUTION
When the user switches to AUTO or POWER mode, the LED around the filter is also turned on. Do
not put in your finger or alien particles inside the fan. It can be caused of an injury or malfunction.
CAUTION
Do not wash the HYGIENE FRESH filter by using water because it can be caused of malfunction.
This filter may not be effective for all types of bacteria and virus.
This is effective to remove the bacteria which is not on the food in the refrigerator.
You can purchase the HYGIENE FRESH filter at the nearest distributor or the service center.
17
WATER DISPENSER (OPTIONAL)
Pour water after the water tank is in position.
Necessarily separate the water tank to clean it our when not in use.
When the water tank is not in position after filling it with water, water can leak out by the valve.
Pouring water in the water tank
Cover Cap
1. Open the cover cap and pour water into the
water tank.
2. Close the cover cap.
3. The water tank is optional removable part
which can be applied to enlarge the storage
capacity. You can use the upper basket after
removing the water tank and closing up the
hole with a plug.
The plug is enclosed with the egg tray.
Caution
Do not use anything other then water, even
hot water needs to be cooled before being
poured into the water tank.
Do not fill more than the indicated level.
Drinking Water
1. Press the dispenser pad with cup.
2. The water is released when the dispenser
pad is pressed. The pad returns to its original
position when the cup is removed and the
water stops its flow.
18
SMART FUNCTIONS (Only for applied models)
router. Purchase a Wi-Fi repeater (range
extender) to improve the Wi-Fi signal
strength.
The Wi-Fi connection may not connect or may
be interrupted because of the home network
environment.
The network connection may not work
properly depending on the Internet service
provider.
The surrounding wireless environment can
make the wireless network service run slowly.
The appliance cannot be registered due to
problems with the wireless signal
transmission. Unplug the appliance and wait
about a minute before trying again.
If the firewall on your wireless router is
enabled, disable the firewall or add an
exception to it.
The wireless network name (SSID) should be
a combination of English letters and
numbers.(Do not use special characters.)
Smartphone user interface (UI) may vary
depending on the mobile operating
system(OS) and the manufacturer.
If the security protocol of the router is set to
WEP, you may fail to set up the network.
Please change it to other security protocols
(WPA2 is recommended) and register the
product again.
Using Smart ThinQ
Application
For appliances with the
or
logo
Things to check before using
LG SmartThinQ
1
Check the distance between the appliance
and the wireless router (Wi-Fi network).
If the distance between the appliance and
the wireless router is too far, the signal
strength becomes weak. It may take a
long time to register or installation may
fail.
2
Turn off the Mobile data or Cellular Data on
your smartphone.
For iPhones, turn data off by going to
Settings → Cellular → Cellular Data.
3
Connect your smartphone to the wireless
router.
NOTE
To verify the Wi-Fi connection, check that
Wi-Fi
icon on the control panel is lit.
The appliance supports 2.4 GHz Wi-Fi
networks only. To check your network
frequency, contact your Internet service
provider or refer to your wireless router
manual.
LG SmartThinQ is not responsible for any
network connection problems or any faults,
malfunctions, or errors caused by network
connection.
If the appliance is having trouble connecting
to the Wi-Fi network, it may be too far from the
19
SMART FUNCTIONS (Only for applied models)
Installing LG SmartThinQ
Re-registering the Appliance or
Registering Another User
Search for the LG SmartThinQ application from
the Google Play Store or Apple App Store on a
smart phone. Follow instructions to download
and install the application.
Press and hold the Wi-Fi button for 3 seconds to
temporarily turn it off. Run the LG SmartThinQ
application and follow the instructions in the
application to register the appliance.
Wi-Fi Function
NOTE
Communicate with the appliance from a smart
phone using the convenient smart features.
To disable the Wi-Fi function, press and hold the
Wi-Fi button for 3 seconds. Wi-Fi icon will be
turned off.
Firmware Update
Keep the appliance performance updated.
Open Source Software Notice
Information
Smart Diagnosis™
If you use the Smart Diagnosis function, you will
be provided with the useful information such as a
correct way of using the appliance based on the
pattern of use.
To obtain the source code under GPL, LGPL,
MPL, and other open source licenses, that is
contained in this product, please visit
http://opensource.lge.com.
In addition to the source code, all referred
license terms, warranty disclaimers and
copyright notices are available for download.
LG Electronics will also provide open source
code to you on CD-ROM for a charge covering
the cost of performing such distribution (such as
the cost of media, shipping, and handling) upon
email request to opensource@lge.com. This
offer is valid for a period of three years after our
last shipment of this product. This offer is valid to
anyone in receipt of this information.
Settings
Allows you to set various options on the
refrigerator and in the application.
NOTE
If you change your wireless router, Internet
service provider, or password, delete the
registered appliance from the LG SmartThinQ
application and register it again.
The application is subject to change for
appliance improvement purposes without
notice to users.
Functions may vary by model.
Connecting to Wi-Fi
The Wi-Fi button, when used with the LG
SmartThinQ application, allows the appliance to
connect to a home Wi-Fi network. The Wi-Fi icon
shows the status of the appliance’s network
connection. The icon illuminates when the
appliance is connected to the Wi-Fi network.
Initial Appliance Registration
Run the LG SmartThinQ application and follow
the instructions in the application to register the
appliance.
20
SMART FUNCTIONS (Only for applied models)
Using Smart Diagnosis™
For appliances with the
or
logo
Display panel is inside the Fridge Room.
Smart DiagnosisTM Through the
Customer Information Centre
Use this function if you need an accurate
diagnosis by an LG Electronics customer
information centre when the appliance
malfunctions or fails. Use this function only to
contact the service representative, not during
normal operation.
1
Open the fridge door.
2
Press and hold the Fridge button for three
seconds or longer.
3
If the buzzer sounds 4 times, open the
freezer door and hold the phone near the
speaker hole.
If the display has been locked for over 5
minutes, you must deactivate the lock
and then reactivate it.
Display panel is on the Freezer door
1
Close the Freezer and Fridge doors, then
press and hold the Lock button to activate
the lock function.
If the display has been locked for over 5
minutes, you must deactivate the lock
and then reactivate it.
4
2
3
NOTE
Press and hold the Fridge button for three
seconds or longer.
The control panel will be turned off, and
then “3” will be displayed on the fridge
temperature display part.
Open both fridge door and freezer door, and
then hold the phone on the upper right
speaker hole.
Position the phone so that its microphone
is aligned with the speaker hole.
4
After the data transfer is complete, the
service agent will explain the result of the
Smart Diagnosis™.
After the data transfer is complete, the
service agent will explain the result of the
Smart DiagnosisTM.
21
Position the phone so that its microphone is
aligned with the speaker hole.
The Smart Diagnosis™ sound is generated
after pressing the Fridge button for three
seconds.
Hold the phone to the upper right speaker
hole and wait while the data is transmitted.
Do not take the phone off the speaker hole
while the data is transmitted.
The data transfer sound may be harsh to the
ear while the Smart Diagnosis™ data is being
transmitted, but do not take the phone off the
speaker hole for accurate diagnosis until the
data transfer sound has stopped.
When the data transfer is complete, the
transfer completion message is displayed
and the control panel is automatically turned
off and then on again after a few seconds.
Afterwards the customer information centre
explains the diagnosis result.
The Smart Diagnosis™ function depends on
the local call quality.
The communication performance will improve
and you can transmit a better signal if you use
a land line home phone.
If the Smart Diagnosis™ data transfer is poor
due to poor call quality, you may not receive
the best Smart Diagnosis™ service.
OPERATIONS
LAMP REPLACEMENT
NOTE : This product applies LED Lamp which cannot be replaced
by the user. Please contact authorized service centre for
the lamp replacement.
INVERTER-ON FEATURE (Optional)
1. While using this feature, the refrigerator will work on basic requirement as required by the product.
2. The results of the Inverter-On feature may vary depending on the number of appliances that are
running on inverter.
3. For optimum running of refrigerator during Inverter-On mode, it is recommended to switch off the
other appliances which are not in use.
4. It is recommended to confirm the quality of food items before consumption.
5. Ice cream etc. may get soften during the use of this feature, if situation arises so, it is
recommended to change the setting as per one’s choice.
LED PATTEN DURING INVERTER-ON MODE (OPTIONAL)
During the use of this feature, you will find this pattern of LED running. It is a symbol that the
product is running at basic energy requirement. One can press the button “REF TEMP” to
change the LED setting during power cuts, if needed. The LED will then show the setting as
desired. When the mode is changed from Normal supply to Inverter mode & vice versa, the
LED pattern will take some time to display the change.
VACATION TIME
During average length vacations, you will probably find it best to leave the refrigerator in
operation. Place freezable items in freezer for longer life.
If you are leaving the appliance turned off for an extended period of time, remove all food
and unplug the power cord. Clean the interior, and leave the doors slightly ajar to prevent
mould from growing in the appliance.
22
• In the event of a blackout, call the electricity company and ask how long it is going to last.
- You should avoid door openings while the power is off.
- When the power supply gets back to normal, check the condition of the food.
• If there are chill compartments in the appliance, do not store vegetables and fruits with higher
moisture content in the chill compartments as they may freeze due to the lower temperature.
23
24
25
SUPPLY CORD
REPLACEMENT
If the supply cord is damaged, it
must be replaced by the
manufacturer or its service agent
or a similarly qualified person in
order to avoid a hazard.
Disposal of the old appliance
This appliance contains fluid (refrigerant, lubricant) and is made of
parts and materials which are reusable and/or recyclable.
All the important materials should be sent to the collection center of
waste material and can be reused after rework (recycling). For take
back, please contact with the local agency.
“This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities, or
lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a
person responsible for their safety.
Children should be supervised to ensure that they do not play with
the appliance.”
26
P/NO : MFL71664404
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising