LG | LHD427 | Owner's Manual | LG LHD427 Owner’s Manual

LG LHD427 Owner’s Manual
OWNER’S MANUAL
DVD Home Theater
System
Please read this manual carefully before operating your set and retain it for future
reference.
MODEL
LHD427 (LHD427, S47S3-S, S47S3-W)
1903_Rev01
www.lg.com
Copyright © 2019 LG Electronics Inc. All Rights Reserved.
2
Getting Started
Safety Information
1
CAUTION
Getting Started
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK DO NOT REMOVE COVER (OR BACK)
NO USER-SERVICEABLE PARTS INSIDE REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
This lightning flash with arrowhead
symbol within an equilateral triangle
is intended to alert the user to the
presence of uninsulated dangerous
voltage within the product’s
enclosure that may be of sufficient
magnitude to constitute a risk of
electric shock to persons.
The exclamation point within an
equilateral triangle is intended
to alert the user to the presence
of important operating and
maintenance (servicing)
instructions in the literature
accompanying the product.
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN
OR MOISTURE.
CAUTION: The apparatus should not be exposed to
water (dripping or splashing) and no objects filled
with liquids, such as vases, should be placed on the
apparatus.
WARNING: Do not install this equipment in a
confined space such as a book case or similar unit.
CAUTION: Do not use high voltage products around
this product. (ex. Electrical swatter) This product may
malfunction due to electrical shock.
CAUTION: Do not block any ventilation openings.
Install in accordance with the manufacturer’s
instructions.
Slots and openings in the cabinet are provided
for ventilation and to ensure reliable operation of
the product and to protect it from over heating.
The openings should never be blocked by placing
the product on a bed, sofa, rug or other similar
surface. This product shall not be placed in a builtin installation such as a bookcase or rack unless
proper ventilation is provided or the manufacturer’s
instruction has been adhered to.
CAUTION: This product employs a Laser System.
To ensure proper use of this product, please read
this owner’s manual carefully and retain it for future
reference. Shall the unit require maintenance, contact
an authorized service center.
Use of controls, adjustments or the performance of
procedures other than those specified herein may
result in hazardous radiation exposure.
To prevent direct exposure to laser beam, do not try
to open the enclosure.
CAUTION concerning the Power Cord
The Power Plug is the disconnecting device. In case
of an emergency, the Power Plug must remain readily
accessible.
Check the specification page of this owner’s manual
to be certain of the current requirements.
Do not overload wall outlets. Overloaded wall outlets,
loose or damaged wall outlets, extension cords, frayed
power cords, or damaged or cracked wire insulation
are dangerous. Any of these conditions could result
in electric shock or fire. Periodically examine the
cord of your device, and if its appearance indicates
damage or deterioration, unplug it, discontinue use of
the device, and have the cord replaced with an exact
replacement part by an authorized service center.
Protect the power cord from physical or mechanical
abuse, such as being twisted, kinked, pinched, closed
in a door, or walked upon. Pay particular attention to
plugs, wall outlets, and the point where the cord exits
the device.
Getting Started
NOTICE: For safety marking information including
product identification and supply ratings, please refer
to the main label on the bottom or the other surface
of the product.
Symbols
~
0
Refers to alternating current(AC).
Refers to direct current(DC).
Refers to class II equipment.
1
Refers to stand-by.
!
Refers to “ON” (power).
Refers to dangerous voltage.
1
Getting Started
Caution: No naked flame sources, such as lighted
candles, should be placed on the apparatus.
3
4
Table of Contents
Table of Contents
1
Getting Started
2
6
6
6
6
6
7
7
7
7
7
8
9
10
11
Safety Information
Unique Features
– Portable In
– USB Direct Recording
– Full HD up-scaling
– Bluetooth®
Introduction
– Playable Discs
– About the “7” Symbol Display
– Symbols Used in this Manual
– Regional Codes
Playable file Requirement
Remote control
Front panel
Rear panel
2
Connecting
12
13
14
14
15
16
16
16
16
17
17
17
18
Attaching the speakers to the unit
Positioning the system
Connections to Your TV
– HDMI Out Connection
– Video Connection
– Resolution Setting
Video Output Resolution
Optional Equipment Connection
– AUX (L/R) INPUT Connection
– PORT. IN (Portable Input) Connection
– Listening to music from your portable player
or external device
– USB Connection
Antenna Connection
3
System Setting
19
19
19
20
20
21
Adjust the setup settings
– OSD Initial language settings - Optional
– To display and exit the Setup menu
– Language
– Display
– Audio
22
– Lock (Parental Control)
4
Operating
23
23
24
24
24
24
24
24
24
24
25
25
26
27
27
27
27
27
27
27
27
27
28
28
28
28
28
28
29
29
29
30
30
31
31
33
34
Using the Home Menu
Basic Operations
Other Operations
– Displaying Disc Information on-screen
– To display the DVD Menu
– To display the DVD title
– 1.5 times speed playback
– Screen Saver
– Starting play from selected time
– Resume playback
– Changing subtitle code page
– Marked Playback
– Viewing a PHOTO file
– Sleep Timer Setting
– Dimmer
– Turn off the sound temporarily
– Last Scene Memory
– Power Resume - Optional
– System Select - Optional
– Adjust the speaker level settings
– VOCAL FADER
– Auto power down
Radio Operations
– Listening to the radio
– Presetting the Radio Stations
– Deleting all the saved stations
– Deleting a saved station
– Improving poor FM reception
Sound adjustment
– Setting the surround mode
– Setting the USER EQ
Advanced Operations
– Recording to USB
Using a Bluetooth wireless technology
– Listening to music of a Bluetooth device
Auto function change
AUTO POWER On
Table of Contents
5
Troubleshooting
35
Troubleshooting
6
Appendix
36
Controlling a TV with the Supplied Remote
Control
– Setting up the remote to control your TV
Maintenance
– Handling the Unit
– Notes on Discs
Area Code List
Language code List
Trademarks and Licenses
Specifications
36
37
37
37
38
39
40
41
5
1
2
3
4
5
6
6
Getting Started
Unique Features
1
Portable In
Getting Started
Listen to music from your portable device. (MP3,
Notebook, etc.)
USB Direct Recording
Records music from CD to your USB device.
Full HD up-scaling
Views Full HD picture quality with simple setup.
Bluetooth®
Listens to music stored on your bluetooth device.
Getting Started
Introduction
Playable Discs
DVD-VIDEO (8 cm/12 cm disc)
Discs such as movies that can be
purchased or rented.
DVD±R (8 cm/12 cm disc)
Video mode and finalized only.
DVD-RW (8 cm/12 cm disc)
Video mode and finalized only.
DVD+R: Video mode only
Supports the double layer disc also.
DVD+RW (8 cm/12 cm disc)
Video mode and finalized only.
Audio CD: Music CDs or CD-R/CDRW in music CD format that can be
purchased.
About the “7” Symbol Display
“7” may appear on your TV display during operation
and indicates that the function explained in this
owner’s manual is not available on that specific
media.
Symbols Used in this Manual
r
DVD-Video, DVD±R/RW in Video
mode and finalized
t
Audio CDs
y
Video files contained in the USB/
Disc
u
Audio files contained in the USB/
Disc
i
Photo files contained in the USB/
Disc
,,Note
Indicates special notes and operating features.
,,Tip
Indicates tip and hints for making the task easier.
>>Caution
Indicates cautions for preventing possible damages
from abuse.
Regional Codes
This unit has a regional code printed on the unit. This
unit can play only DVD discs labeled same as the rear
of the unit or “ALL”.
yy Most DVD discs have a globe with one or more
numbers in it clearly visible on the cover. This
number must match your unit’s regional code or
the disc cannot play.
yy If you try to play a DVD with a different regional
code from your unit, the message “Check Regional
Code” appears on the TV screen.
1
Getting Started
This unit plays DVD±R/RW and CD-R/RW that
contains audio titles, MP3, WMA and/or JPEG files.
Some DVD±RW/DVD±R or CD-RW/CD-R cannot
be played on this unit due to the recording quality or
physical condition of the disc, or the characteristics of
the recording device and authoring software.
7
8
Getting Started
Playable file
Requirement
1
Getting Started
Music file requirement
MP3/ WMA file compatibility with this unit is limited
as follows :
yy Sampling frequency : within 32 to 48 kHz (MP3),
within 32 to 48 kHz (WMA)
yy Bit rate : within 32 to 320 kbps (MP3),
40 to 192 kbps (WMA)
yy Support Version : v2, v7, v8, v9
yy Maximum files : Under 999
yy File extensions : “.mp3”/ “.wma”
yy CD-ROM file format : ISO9660/ JOLIET
yy We recommend that you use Easy-CD Creator,
which creates an ISO9660 file system.
Video file requirement
Video file compatibility with this unit is limited as
follows:
yy Available resolution: within 720 x 576 (W x H)
pixels.
yy The file name of the Video subtitle should be
entered within 45 characters.
yy If there is impossible code to express in the Video
file, it may be displayed as “ _ “ mark on the display.
yy Frame rate : less than 30 fps.
yy If the video and audio structure of recorded files is
not interleaved, either video or audio is outputted.
yy Playable Video file : “.avi”, “.mpg”, “.mpeg”
yy Playable Subtitle format : SubRip (*.srt/ *.txt),
SAMI (*.smi), SubStation Alpha (*.ssa/ *.txt),
MicroDVD (*.sub/ *.txt), SubViewer 2.0 (*.sub/
*.txt), Vobsub (*.sub)
yy Playable Codec format :
“Xvid”, “MPEG-2”
yy You have to set the disc format option to
[Mastered] in order to make the discs compatible
with the LG players when formatting rewritable
discs. When setting the option to Live File System,
you cannot use it on LG players.(Mastered/ Live
File System : Disc format system for Windows
Vista)
yy Sampling frequency : within 32 to 48 kHz (MP3),
within 32 to 48 kHz (WMA)
The DTS is not supported. In case of DTS audio
format, audio is not output.
yy For Discs formatted in Live file system, you can not
it on this unit.
Photo file requirement
yy If the name of movie file is different from that of
the subtitle file, during playback of a Video file,
subtitle may not be display.
Photo file compatibility with this unit is limited as
follows :
yy Max pixel in width : 2760 x 2048 pixel
yy Maximum files : Under 999
yy Some discs may not operate due to a different
recording format or the condition of disc.
yy File extensions: “.jpg”
yy CD-ROM file format : ISO9660/ JOLIET
yy Playable Audio format : “AC3”, “PCM”, “MP3”,
“WMA”,
yy Bit rate : within 32 to 320 kbps (MP3), 40 to 192
kbps (WMA)
yy If you play a Xvid file differ from Xvid spec, it may
not operate normally.
yy If you play GMC video file which is more than
1-warp point, video playback screen will not
smooth.
Getting Started
9
Remote control
• • • • • • d • • • • • •
SPEAKER LEVEL: Sets the sound
level of desired speaker.
MARKER: Marks play list.
SOUND EFFECT: Selects a sound
effect mode.
1 POWER: Switches the unit ON
or OFF.
B OPEN/CLOSE: Opens and
closes the disc tray.
SLEEP: Sets the System to turn off
automatically at a specified time.
(Dimmer : The display window will
be darken by half.)
m INFO/DISPLAY: Accesses OnScreen Display.
n HOME: Displays the [Home
Menu].
DISC MENU: Accesses the menu
on a DVD disc.
• • • • • • b • • • • • •
W/S/A/D (up/ down/ left/
right): Used to navigate on-screen
displays.
PRESET +/-: Selects programme
of Radio.
TUNING +/-: Tunes in the desired
radio station.
Replacement of battery
b ENTER: Acknowledges menu
selection.
Presetting the radio stations.
x BACK: Moves backwards in
the menu or exits the setup menu.
AA
A(R
03
)
Remove the battery cover on the
rear of the remote control, and
insert the battery with 4 and 5
matched correctly.
TITLE: If the current DVD title has
a menu, the title menu appears
on the screen. Otherwise, the disc
menu may not appear.
• • • • • • c • • • • • •
Z STOP: Stops playback.
d PLAY, MONO/STEREO: Starts
playback. Selects Mono/ Stereo.
M PAUSE/STEP: Pauses playback.
C/V SKIP: Goes to the next
or previous chapter / track / file.
c/v SCAN: Searches
backward or forward.
VOL -/+ (Volume): Adjusts speaker
volume.
[ MUTE: Mutes the sound.
X REC: USB Direct Recording.
• • • • • • e • • • • • •
0-9 numerical buttons: Selects
numbered options in a menu.
h REPEAT: Selects a play mode.
(Repeat/ Random)
CLEAR: Removes a number when
setting the password.
• • • • • • f • • • • • •
TV Control buttons: See page
36.
?: This button is not available.
MIC VOL -/+ (Microphone Volume):
Adjusts microphone volume.
ECHO VOL -/+ (Volume): Adjusts
echo volume.
VOCAL FADER: You can enjoy the
function as karaoke, by reducing
singer vocal of music in the various
source.
1
Getting Started
• • • • • • a • • • • • •
P RADIO&INPUT: Selects the
function and input source.
10 Getting Started
Front panel
1
Getting Started
1
3
4
5
a Disc Tray
b Display window
Shows the current status of the unit.
c Microphone jacks 1/2
d PORT. IN
Connects to a portable player with audio
outputs.
e USB Port
Connects a USB device.
f R (OPEN/CLOSE)
Opens or closes the disc tray.
2
6 7 8 9
10
11
g T (PLAY/PAUSE)
Starts playback.
Pauses playback temporarily, press again to exit
pause mode.
h I (STOP)
Stops playback.
i F (FUNCTION)
Changes the input source or function.
j VOL. (Volume)
Adjusts speaker volume.
k 1 (Standby)
Switches the unit ON or OFF.
Getting Started
11
Rear panel
1
Getting Started
a Power cord
b Speaker connectors
Connects the speaker cables.
c HDMI OUT TO TV
Connects to TV with HDMI inputs.
(Interface for digital audio and video)
d AUX (L/R) INPUT
Connects to an external source with 2 channel
audio outputs.
e VIDEO OUT
Connects to a TV with video inputs.
f ANTENNA FM
FM- Connects the FM wired antenna
12 Connecting
Attaching the speakers
to the unit
2
1. To connect the cable to the unit, press each
plastic finger pad to open the connection
terminals on the unit. Insert the wire and release
the finger pad.
Color
Speaker
Position
Grey (R.R/L)
Rear
Rear right
Blue (R.R/L)
Rear
Rear left
Green (C)
Center
Center
Orange
Sub woofer
Any front position
Red (F.R/L)
Front
Front right
White (F.R/L)
Front
Front left
Connecting
>>Caution
Connect the black of each wire to the terminals
marked - (minus) and the other end to the
terminals marked + (plus).
Connect a woofer cord to the player. When
connecting a woofer cord to the player, insert
the connector until it clicks.
yy Be careful to make sure children do not put
their hands or any objects into the *speaker
duct.
*Speaker duct : A hole for plentiful bass
sound on speaker cabinet (enclosure).
yy Place the center speaker at a safe distance
from the child’s reach. Otherwise it may result
in the speaker falling down and causing
personal injury and/or property damage.
yy The speakers contain magnet parts, so color
irregularity may occur on the TV screen or PC
monitor screen. Please use the speakers far
away from either TV screen or PC monitor.
yy Before using the subwoofer, remove the
protective vinyl.
Connecting 13
Positioning the system
The following illustration shows an example of
positioning the system. Note that the illustrations
in these instructions differ from the actual unit for
explanation purposes.
For the best possible surround sound, all the speakers
other than the subwoofer should be placed at the
same distance from the listening
position ( ).
Front left speaker (L)/ Front right speaker (R):
Place the front speakers to the sides of the
monitor or screen and as flush with the screen
surface as possible.
Center speaker: Place the center speaker above or
below the monitor or screen.
Surround left speaker (L)/ Surround right
speaker (R):
Place these speakers behind your listening
position, facing slightly inwards.
Unit
2
Connecting
ubwoofer: The position of the subwoofer is not
S
so critical, because low bass sounds are not highly
directional. But it is better to place the subwoofer
near the front speakers. Turn it slightly toward the
center of the room to reduce the wall reflections.
14 Connecting
Connections to Your TV
Make one of the following connections, depending on
the capabilities of your existing equipment.
,,Note
2
yy Depending on your TV and other equipment
you wish to connect, there are various ways
you could connect the player. Use only one of
the connections described in this manual.
Connecting
yy Please refer to the manuals of your TV, Stereo
System or other devices as necessary to
make the best connections.
HDMI Out Connection
If you have a HDMI TV or monitor, you can connect it
to this unit using a HDMI cable (Type A, High Speed
HDMI™ Cable).
Connect the HDMI OUT jack on the unit to the HDMI
IN jack on a HDMI compatible TV or monitor.
Set the TV’s source to HDMI (refer to TV’s Owner’s
manual).
Unit
>>Caution
yy Make sure the unit is connected directly to
the TV. Tune the TV to the correct video input
channel.
yy Do not connect your player via your VCR.
The image could be distorted by the copy
protection system.
TV
,,Tip
yy You can fully enjoy digital audio and video
signals together with this HDMI connection.
yy When you use HDMI connection, you can
change the resolution for the HDMI output.
(Refer to “Resolution Setting” on page 16.)
>>Caution
yy Changing the resolution when the connection
has already been established may result in
malfunctions. To solve the problem, turn off
the unit and then turn it on again.
yy When the HDMI connection with HDCP is
not verified, TV screen is changed to black or
green screen or the snow noise may occur
on the screen. In this case, check the HDMI
connection, or disconnect the HDMI cable.
Connecting 15
,,Note
yy If a connected HDMI device does not accept
the audio output of the unit, the HDMI
device’s audio sound may be distorted or may
not output.
yy When you connect a HDMI or DVI compatible
device make sure of the following:
Connect the VIDEO OUT jack on the unit to the video
in jack on the TV using a video cable.
You can hear the sound through the system’s
speakers.
2
Unit
Connecting
- Try switching off the HDMI/DVI device and
this unit. Next, switch on the HDMI/DVI
device and leave it for around 30 seconds,
then switch on this unit.
Video Connection
- The connected device’s video input is set
correctly for this unit.
- The connected device is compatible with
720 x 480i (or 576i), 720 x 480p (or 576p),
1280 x 720p, 1920 x 1080i or 1920 x
1080p video input.
yy Not all HDCP-compatible HDMI or DVI devices
will work with this unit.
- The picture will not be displayed properly
with non-HDCP device.
- This unit does not playback and TV screen
is changed to black or green screen or the
snow noise may occur on the screen.
TV
yy If there is noise or lines on the screen, please
check the HDMI cable and use a higher
version cable than High Speed HDMI™ Cable.
yy If you use Bluetooth Function of the unit, the
audio is not output to HDMI.
Yellow
16 Connecting
Resolution Setting
The unit provides several output resolutions for HDMI
OUT.
You can change the resolution using [Setup] menu.
1. Press n HOME.
2. Use A/D to select the [Setup] and press
b ENTER. The [Setup] menu appears.
Optional Equipment
Connection
AUX (L/R) INPUT Connection
Connect an Output of auxiliary device to the AUX (L/
R) INPUT Connector.
2
Connecting
Unit
3. Use W/S to select [Display] option then press
D to move to the second level.
4. Use W/S to select the [Resolution] option then
press D to move to the third level.
5. Use W/S to select the desired resolution then
press b ENTER to confirm your selection.
,,Note
If your TV does not accept the resolution you
have set on the player, you can set resolution to
480p (or 576p) as follows:
Press Z STOP for more than 5 seconds.
Video Output
Resolution
Displayed resolution in display window and outputted
resolution may different according to connection
type.
[HDMI OUT] : 1080p, 1080i, 720p and 480p (or
576p) and 480i (or 576i)
[VIDEO OUT] : 480i (or 576i)
To the audio output jacks of
your component
(TV, VCR, etc.)
Red
White
,,Note
If your TV has only one output for audio (mono),
connect it to the left (white) audio jack on the
unit.
Connecting 17
PORT. IN (Portable Input)
Connection
Connect an output of portable device (MP3 or PMP
etc.) to the PORT. IN connector.
USB Connection
Connect the USB port of USB Memory (or MP3
player, etc.) to the USB port on the front of the unit.
2
MP3 player, etc...
Removing the USB Device from the unit.
1. Choose a different function mode or press
Z STOP twice in a row.
2. Remove the USB device from the unit.
Compatible USB Devices
Listening to music from your
portable player or external
device
yy MP3 Player : Flash type MP3 player.
yy USB Flash Drive :Devices that support USB2.0 or
USB1.1.
The unit can be used to play the music from many
types of portable player or external devices.
yy The USB function of this unit does not support
some USB devices.
1. Connect the portable player to the
PORT. IN (PORTABLE IN) connector of the unit.
Or
Connect the external device to the AUX (L/R)
INPUT connector of the unit.
2. Turn the power on by pressing 1 (POWER).
3. Select the PORTABLE or AUX function by
pressing P RADIO&INPUT.
4. Turn on the portable player or external device and
start it playing.
USB device requirement
yy Devices which require additional program
installation connected to a computer, are not
supported.
yy Do not extract the USB device while in operation.
yy For a large capacity USB, it may take longer than a
few minute to be searched.
yy To prevent data loss, back up all data.
yy If you use a USB extension cable or USB hub, the
USB device is not recognized.
yy Using NTFS file system is not supported. (Only
FAT(16/32) file system is supported.)
yy This unit is not supported when the total number
of files is 1000 or more.
yy External HDD, Card readers, Locked devices,
or hard type usb devices are not supported.
yy USB port of the unit cannot be connected to PC.
The unit can not be used as a storage device.
yy Some USB may not work with this unit.
Connecting
,,Note
18 Connecting
Antenna Connection
Connect the supplied FM antenna for listening to the
radio.
Connect the FM Wire antenna to the FM antenna
connector.
2
Connecting
,,Note
Be sure to fully extend the FM wire antenna.
System Setting 19
Adjust the setup
settings
By using the Setup menu, you can make various
adjustments to items such as picture and sound.
To display and exit the Setup
menu
1. Press n HOME.
Displays the [Home Menu].
You can also set a language for the subtitles and the
Setup menu, among other things. For details on each
Setup menu item, see pages 19 to 22.
OSD Initial language settings Optional
1. Press 1 (POWER) to turn the unit on. The
language setup menu will appear on the screen.
2. Use WSAD to select a language then press
b ENTER.
The confirm menu will appear.
3. Use AD to select the [Enter] then press
b ENTER to finish the language setup.
3. Press b ENTER.
Displays the [Setup].
4. Press n HOME or x BACK to exit in the
[Setup] Menu.
About help menu for Setup
Menu
ws
Buttons
Operation
WS
Moving to another
menu.
a
Move
A
Moving to previous
level.
d
Move
D
Moving to next level
or selecting menu.
x BACK
To exit the [Setup]
menu or [ 5.1
Speaker Setup].
b ENTER
To confirm menu.
Move
x
Close
b
Select
3
System Setting
During the first use of this unit, the initial language
setup menu appears on your TV screen. You must
complete initial language selection before using the
unit. English will be selected as the initial language.
2. Select an [Setup] by using AD.
20 System Setting
Language
Menu Language
Select a language for the Setup menu and on screen
display.
Disc Audio / Disc Subtitle / Disc Menu
Select the language you prefer for the audio track
(disc audio), subtitles, and the disc menu.
[Original]
Refers to the original language in which the disc
was recorded.
3
[Other]
System Setting
To select another language, press numeric
buttons and then b ENTER to enter the
corresponding 4-digit number according to the
language code list on the page 39. If you
enter the wrong language code, press CLEAR.
[Off (for Disc Subtitle)]
Turns off Subtitle.
Display
TV Aspect
Select the screen aspect to use based on the shape
of your TV screen.
[Panscan]
Automatically displays the wide picture on the
entire screen and cuts off the portions that do
not fit. (If the disc/file is not compatible with Pan
Scan, the picture is displayed at Letterbox ratio.)
Resolution
Sets the output resolution of HDMI video signal.
Refer to “Resolution Setting” for details about the
resolution (Page 16).
[Auto]
If the HDMI OUT jack is connected to
TVs providing display information (EDID),
automatically selects the resolution best suited
to the connected TV. If VIDEO OUT is only
connected, this changes the resolution to 480i
(or 576i) as default resolution.
[1080p]
Outputs 1080 lines of progressive video.
[1080i]
Outputs 1080 lines of interlaced video.
[720p]
Outputs 720 lines of progressive video.
[480p (or 576p)]
Outputs 480 (or 576) lines of progressive video.
[4:3]
[480i (or 576i)]
Select when a standard 4:3 TV is connected.
Outputs 480 (or (576) lines of interlaced video.
[16:9]
Select when a 16:9 wide TV is connected.
Display Mode
The Display Mode setting works only when the TV
Aspect mode is set to 4:3.
[Letterbox]
Displays a wide picture with bands on the upper
and lower portions of the screen.
System Setting 21
Audio
DRC (Dynamic Range Control)
5.1 Speaker Setup
Make the sound clear when the volume is turned
down (Dolby Digital only). Set to [On] for this effect.
Make the following settings for the built-in 5.1
channel surround decoder.
Vocal
1. Select [5.1 Speaker Setup] on the [Audio] menu.
Select [On] to mix karaoke channels into normal
stereo.
2. Press b ENTER.
The [5.1 SPEAKER] appears.
This function is effective for multi-channel karaoke
DVDs only.
HD AV Sync
5. Returns to the previous menu by pressing
x BACK.
Semi Karaoke
3. Use AD to select the desired speaker.
[Speaker]
Select a speaker that you want to adjust.
,,Note
Certain speaker settings are prohibited by
the Dolby Digital licensing agreement.
[Size]
Since the speaker settings are fixed, you cannot
change the settings.
[Volume]
Adjust the output level of each speaker.
[Distance]
Adjust the distance between each speaker and
the listening position.
[Speaker Test Start]
Select [Speaker Test Start] by using the WS
and press b ENTER. Press b ENTER again to
stop. Adjust the volume to match the volume of
test signals memorized in the system.
When a chapter/ title/ track is fully finished, this
function shows the score in the screen with a fanfare
sound.
[On]
When you finished singing a score will appear on
the screen.
[Off]
Fanfare and score do not appear on the screen.
,,Note
yy DVD, DVD Karaoke discs with more than 2
tracks are available discs for the this function.
yy When you watch movies, “off ” the Semi
Karaoke at the SETUP menu or enjoy it
without connecting the MIC if the fanfare or
score appears during changing a chapter.
yy This function operate on the DVD/CD mode.
yy The Semi Karaoke function is available only
when a microphone is connected.
yy If you do not use the microphone, turn down
the volume and disconnect the microphone.
3
System Setting
4. Adjust options using WSAD buttons.
Sometimes Digital TV encounters a delay between
picture and sound. If this happens you can
compensate by setting a delay on the sound so that
it effectively ‘waits’ for the picture to arrive: this is
called HD AV Sync. Use WS (on the remote control)
to scroll up and down through the delay amount,
which you can set at anything between 0 and
300ms.
22 System Setting
Lock (Parental Control)
Password
You can enter or change password.
Initial Setting the Area Code:
When you use this unit for the first time, you have to
set the Area Code.
1. Select the [Lock] menu and then press D.
2. Press D.
To access the [Lock] options, you must input the
password you have created. Input a password and
press b ENTER. Enter it again and press
b ENTER to verify. If you make a mistake before
pressing b ENTER, press CLEAR.
3. Select the first character using WS buttons.
3
System Setting
4. Press b ENTER and select the second character
using WS buttons.
5. Press b ENTER to confirm your Area code
selection.
Rating
Blocks playback of rated DVDs based on their
contents. Not all discs are rated.
1. Select [Rating] on the [Lock] menu then press D.
2. Input a password and press b ENTER.
3. Select a rating from 1 to 8 using the WS
buttons.
[Rating 1-8]
Rating one (1) has the most restrictions and
rating eight (8) is the least restrictive.
1. Select [Password] on the [Lock] menu and then
press D.
2. Press b ENTER.
3. Input a password and press b ENTER.
To change the password, press b ENTER when
the [Change] option is highlighted. Input a
password and press b ENTER. Enter it again and
press b ENTER to verify.
4. Press n HOME to exit the menu.
,,Note
If you forget your password, you can clear it
using the following steps:
1. Select the [Setup] menu on the [Home
Menu].
2. Input the 6-digit number “210499” and
press b ENTER. The password is cleared.
Area Code
Enter the code of the area whose standards were
used to rate the DVD video disc, based on the list on
page 38.
1. Select [Area Code] on the [Lock] menu then
press D.
2. Input a password and press b ENTER.
3. Select the first character using WS buttons.
[Unlock]
4. Press b ENTER and select the second character
using WS buttons.
If you select unlock, parental control is not active
and the disc plays in full.
5. Press b ENTER to confirm your Area code
selection.
4. Press b ENTER to confirm your rating selection.
Operating 23
Using the Home Menu
1. Press n HOME.
Displays the [Home Menu].
To
Stop
Press d PLAY, MONO/
STEREO.
Pause
Press M PAUSE/STEP.
2. Select an option by using AD.
3. Press b ENTER then selected option menu.
[Movie] – Start video media’s playback or displays the
[MOVIE] menu.
[Photo] – Displays [PHOTO] menu.
Skipping to the
next/ previous
chapter/ track/
file
[Setup] – Displays the [Setup] menu.
,,Note
Locating a
point quickly by
playing a file in
fast forward or
fast reverse
Basic Operations
1. Insert the disc by using the B OPEN/CLOSE or
connect the USB device to the USB port.
2. Press n HOME.
Displays the [Home Menu].
Playing
repeatedly or
randomly
,,Note
yy For the most Audio CD and DVD-ROM discs,
playback starts automatically.
yy The unit plays only music file contained in the
USB storage device or disc automatically.
During playback, press
C/V SKIP to go to the
next chapter/ track/ file or to
return to the beginning of the
current chapter/ track/ file.
Press C SKIP twice briefly
to step back to the previous
chapter/ track/ file.
During playback, press
c/v SCAN repeatedly to
select the required scan speed.
To return to normal speed, press
d PLAY, MONO/STEREO.
Press h REPEAT repeatedly,
and the current title, chapter
or track will be played back
repeatedly or randomly.
- DVD : Chapter/ Title/ Off
- Video(MOVIE): : Title/ All/ Off
- Audio CD/ MP3/ WMA : Track/
All/ Random/ Off
3. Select an option by using AD.
If you select the [Movie], [Photo] or [Music]
option when you connect up to two devices, it
appears as belows. Select a media then press b
ENTER.
4. Press b ENTER then selected option menu.
Press M PAUSE/STEP
repeatedly to play title Frameby-Frame. (DVD, Movie only)
In the pause mode, press c/
v SCAN to select the
required speed. (DVD only)
Slowing down
the playing
speed
To return to normal speed, press
d PLAY, MONO/STEREO.
In the pause mode, press
v SCAN to select the
required speed. (Movie only)
To return to normal speed, press
d PLAY, MONO/STEREO.
4
Operating
You can not select the [Music], [Movie] or
[Photo] option when the USB device is not
connected or a disc is not inserted.
Press Z STOP.
Playback
Frame-byFrame playback
[Music] – Displays [MUSIC] menu.
Do this
24
Operating
Other Operations
Displaying Disc Information onscreen
You can display various information about the disc
loaded on-screen.
r
The 1.5 speed allows you to watch the pictures and
listen to the sound quicker than playing at a normal
speed.
1. During playback, press d PLAY, MONO/STEREO
to play at 1.5 times speed. “dX1.5” appears on
the screen.
1. Press m INFO/DISPLAY to show various
playback information.
The displayed items differ depending on the disc
type or playing status.
Screen Saver
2. You can select an item by pressing WS and
change or select the setting by pressing AD.
The screen saver appears when you leave the unit in
Stop mode for about five minutes.
Title – Current title number/ total number of titles.
Chapter – Current chapter number/ total number of
chapters.
Time – Elapsed playing time.
4
1.5 times speed playback
Audio – Selected audio language or channel.
Operating
Subtitle – Selected subtitle.
Angle – S
elected angle/ total number of angles.
,,Note
2. Press d PLAY, MONO/STEREO again to exit.
Starting play from selected time
ry
To start playing at any chosen time on the file or title.
1. Press m INFO/DISPLAY during playback.
2. Press WS to select the time clock icon and
“--:--:--” appears.
r
3. Input the required start time in hours, minutes,
and seconds from left to right. If you enter the
wrong numbers, press CLEAR to remove the
numbers you entered. Then input the correct
numbers.
For example, to find a scene at 1 hour, 10
minutes, and 20 seconds, enter “11020” by using
numerical buttons.
When you play a DVD which contains several menu,
you can select the menu you want using the Menu.
4. Press b ENTER to confirm. Playback starts from
the selected time.
1. Press DISC MENU.
The disc’s menu appears.
Resume playback
2. Select the menu by using WSAD.
ryut
If any button is not pressed for a few seconds,
the on-screen display disappears.
To display the DVD Menu
3. Press d PLAY, MONO/STEREO to confirm.
To display the DVD title
r
When you play a DVD which contains several title,
you can select the title you want using the Menu.
1. Press TITLE.
The disc’s title appears.
2. Select the menu by pressing WSAD.
3. Press d PLAY, MONO/STEREO to confirm.
The unit records the point where you pressed the Z
STOP depending on the disc.
If “MZ (Resume Stop)” appears on the screen briefly,
press d PLAY, MONO/STEREO to resume playback
(from the scene point).
If you press Z STOP twice or unload the disc,
“Z”(Complete Stop) appears on the screen. The unit
will clear the stopped point.
Operating
,,Note
yy The resume point may be cleared when a
button is pressed (for example; 1 (POWER),
B OPEN/CLOSE, etc).
yy This function may not work on some disc or
title/track.
2. Select a desired music on the [List] by using the
WS then press MARKER to appears the mark
on the list.
3. Press b ENTER.
Displays the play mode.
4. Select the play mode by using the WS and press
b ENTER.
Changing subtitle code page
[Mark Play]
If the subtitle is not displayed properly, you can
change the subtitle code page to view the subtitle file
properly.
[Current Play]
y
1. During playback, press m INFO/DISPLAY to
display the On-Screen display.
2. Use WS to select the [Code Page] option.
25
Marked playback.
Normal playback.
,,Note
If you want to select all files on the list, select
[Select All] and press b ENTER.
3. Use AD to select desired code option.
4. Press x BACK to exit the On-Screen display.
To delete a Marker
1. Use WS to select the track that you wish to
erase from the marked file.
The mark function enables you to store your
favourite files from any disc or USB device in the unit
memory.
2. Press MARKER.
1. Select [Music] on the [Home Menu].
Use WSAD to select [Deselect All] then press
b ENTER in program edit mode.
ut
Returning to the upper folder.
(MP3/ WMA only)
File information will be displayed
according to the ID3TAG information
on the appropriate music file. (MP3
only)
Selecting all tracks/ files.
Deselecting all tracks/files.
Moving to the previous or next
file list.
To delete all Markers
,,Note
The markers are also cleared when the disc or
USB device is removed, the unit is switched to
power off or the function is switched to others.
4
Operating
Marked Playback
26 Operating
Viewing a PHOTO file
About help menu in the full screen
Menu
Buttons
Menu
m
INFO/
DISPLAY
Displaying the Option
menu.
a/d
Prev./ Next
A/D
Moving to another file.
x
BACK
Returning to the
[Photo] menu.
i
This unit can play discs with photo files.
1. Select [Photo] on the [Home Menu] and press b
ENTER.
Moving to the previous or next
file list.
x
List
Operation
Options while viewing a photo
You can use various options during viewing a photo in
full screen.
1. While viewing a photo in full screen, press
m INFO/DISPLAY to display the option menu.
4
2. Select an option using WSAD.
Returning to the upper
folder.
Operating
2. Press WS to select a folder, and then press
b ENTER.
3. If you want to view a slide show, press WS
to highlight a file and press d PLAY, MONO/
STEREO.
About help menu in the [Photo] menu
Operation
a
b
c
d
e
Menu
Buttons
d Slide
Show
d PLAY,
MONO/
STEREO
Viewing a slide show.
wsad
Move
WSAD
Moving to another
file or content.
b
Select
b ENTER
Viewing a particular
file.
d Rotate – Press  ENTER to rotate the photo.
x
Close
x
BACK
Returning to the
[Home Menu].
e Go to list – Press  ENTER to return [Photo]
menu.
a Current photo/ Total number of photos –
Use AD to view previous/next photo.
b Slide Show d/M– Press  ENTER to start or
pause slide show.
c Speed x3/ x2/ x1 – Use  ENTER to select a
delaying speed between photos in a slide show.
Operating 27
Sleep Timer Setting
System Select - Optional
Press SLEEP one or more times to select delay time
between 10 and 180 minutes, after the unit will turn off.
You must select the appropriate system mode for your
TV system. Press and hold M PAUSE/STEP for more
than five seconds to be able to select a system in the
[Home Menu].
To check the remaining time, press SLEEP.
To cancel the sleep function, press SLEEP repeatedly
until “SLEEP 10” appears, and then press SLEEP
once again while “SLEEP 10” is displayed.
,,Note
You can check the remaining time before the
Unit turns off.
Press SLEEP The remaining time appears in the
display window.
Dimmer
Press SLEEP once. The display window will be darken by
half. To cancel it, press SLEEP repeatedly until dim off.
Press [ MUTE to mute your unit.
You can mute your unit in order, for example, to
answer the telephone, appears the MUTE in the
display window.
To cancel it, press again [ MUTE or change the
volume level.
Last Scene Memory
r
This unit memorizes last scene from the last disc that
is viewed. The last scene remains in memory even if
you remove the disc from the unit or switch off the
unit. If you load a disc that has the scene memorized,
the scene is automatically recalled.
Power Resume - Optional
r
Even if the power suddenly goes out, turn on the
unit and then it plays a position where the contents
is being played. System will periodically save current
playback status.
Adjust the speaker level settings
You can adjust the sound level of each speaker.
1. Press SPEAKER LEVEL repeatedly to select a
desired speaker to set.
2. Press VOL -/+ to adjust the sound level of the
selected speaker while the level setting menu is
displayed on the display window.
3. Repeat and adjust the sound level of the other
speakers.
VOCAL FADER
You can enjoy the function as karaoke, by reducing
singer vocal of music in the various source. (MP3/
WMA/ CD/ etc.) Press the VOCAL FADER, and
“FADE ON” will appear in display window.
To cancel it, press VOCAL FADER again.
The quality of the VOCAL FADER may be different
depending on the recording conditions of music files.
,,Note
yy This function is available to use only when a
microphone is connected.
yy It is not available on the MONO source.
Auto power down
This unit will be off itself to save electric consumption in
the case main unit is not connected to external device
and is not used for 15 minutes. So does this unit after
six hours since Main unit has been connected to other
device using analog input.
4
Operating
Turn off the sound temporarily
,,Note
If the USB device is connected or a disc is
inserted, this function is not operated.
28 Operating
Radio Operations
Be sure that FM antenna is connected. (Page 18)
Listening to the radio
1. Press P RADIO&INPUT until FM appears in
the display window.
The last received station is tuned in.
2. Press and hold TUNING (-/+) for until the
frequency indication starts to change, then
release. Scanning stops when the unit tunes in a
station.
or
Press TUNING (-/+) repeatedly.
3. Adjust the volume by pressing VOL (-/+)
repeatedly.
4
Presetting the Radio Stations
Operating
You can preset 50 stations for FM.
Before tuning, make sure that you have turned down
the volume.
1. Press P RADIO&INPUT until FM appears in
the display window.
2. Select the desired frequency by using
TUNING (-/+).
3. Press b ENTER a preset number will flash in the
display window.
4. Press PRESET (-/+) to select the preset number
you want.
5. Press b ENTER.
The station is stored.
6. Repeat the steps 2 to 5 to store other stations.
7. To listen a preset station, press PRESET (-/+) or
0 to 9 numerical buttons on the remote control.
Deleting all the saved stations
1. Press and hold CLEAR for two seconds.
“ERASEALL” will flash up on the unit display.
2. Press CLEAR to erase all saved of the radio
stations.
Deleting a saved station
1. Press PRESET (-/+) to select a preset number
you want to delete.
2. Press CLEAR, the preset number will blink in the
display window.
3. Press CLEAR again to delete the selected preset
number.
Improving poor FM reception
Press d PLAY, MONO/STEREO on the remote
control. This will change the tuner from stereo to
mono and usually improve the reception.
Operating 29
Sound adjustment
Setting the surround mode
This system has a number of pre-set equalizers. You
can select a desired sound mode by using SOUND
EFFECT.
You can change the SOUND EFFECT using AD
arrow key while the sound effect information is
displayed on.
The displayed items for the equalizer maybe different
depending on sound sources and effects.
On Display
Description
You can enjoy the sound
without equalizer effect.
BASS BLAST
(BASS)
The BASS is Bass Blast. During
playback, reinforce the treble,
bass and surround sound
effect.
USER EQ
FOOTBALL
POWER FRONT
(P-FRONT)
You can adjust the sound
effect.
You can enjoy more dynamic
sound as watching sports
game in the stadium.
You can enjoy the harmonious
sound. This mode is suited
for front-positioned speakers
when they are all placed in a
row.
yy In some of surround modes, some speakers,
there’s no sound or low sound. It depends
on the mode of surround and the source of
audio, it is not defective.
yy This function is not operated when the
microphone is connected to the unit.
Setting the USER EQ
You can adjust the sound level of Bass(BASS) and
Treble(TRE) as your preference.
1. Use SOUND EFFECT to select the USER EQ then
press b ENTER.
2. Use WS to select Bass (BASS) or Treble(TRE).
3. Use AD to select the sound level of Bass(BASS)
or Treble(TRE) then press b ENTER to save the
setting.
4
Operating
STANDARD
(STD)
,,Note
30 Operating
Advanced Operations
Recording to USB
You can record music or sound source to USB device
by connecting in to the port on the unit.
1. Connect the USB device to the unit.
2. Select a mode in which you want to record.
Playback a sound source first.
3. Start the recording by pressing X REC.
4. To stop recording, press Z STOP.
[All tracks/ files recording]
Record to USB in stop or play mode.
[Program list recording]
After marking desired file(s) and you can record
it to USB (Page 25).
4
It’ll be stored as follows.
Operating
Audio CD
,,Note
yy You can check the recording percentage rate
for the USB record on the screen during the
recording. (Audio CD or MP3/ WMA CD only)
yy During recording MP3/WMA, there is no
sound.
yy When you stop recording during playback, the
file that has been recorded at that time will
be stored. (Except MP3/WMA files)
yy Do not remove the USB device or turn off
the unit during USB recording. If does not, an
incomplete file may be made and not deleted
on PC.
yy Recording through microphones is not
available.
yy If USB recording does not work, the message
like “NO USB”, “ERROR”, “USB FULL” or “NO
REC” is displayed on the display window.
yy Multi card reader device or external HDD can
not be used for USB recording.
yy A file is recorded by 128 Mbyte (about 2
hours) when you record for a long term. There
are recorded less than 4 files.
yy In the state CD-G, DTS disc USB record is not
operated.
yy The files in the sub-folders are not recorded
during all track recording.
MP3/ WMA
The other
sources (Tuner,
AUX, Portable)
yy You may not record more than 999 files.
yy The numbering of the recording file is entered
from the lowest number. So if you delete
some of the recording files, the next recording
file could be the lowest number among them.
The making of unauthorized copies of copyprotected material, including computer
programs, files, broadcasts and sound
recordings, may be an infringement of
copyrights and constitute a criminal offense.
This equipment should not be used for such
purposes.
Be responsible
Respect copyrights.
Operating 31
Using a Bluetooth
wireless technology
About Bluetooth
Bluetooth is wireless communication technology for
short range connection.
The sound may be interrupted when the connection
interfered by the other electronic wave or you
connect the Bluetooth in the other rooms.
Connecting individual devices under
Bluetooth® wireless technology does not incur any
charges. A mobile phone with Bluetooth® wireless
technology can be operated via the Cascade if the
connection was made via Bluetooth® wireless
technology.
yy Available Devices : Mobile phone, MP3, Laptop,
PDA (This units be supported the Stereo Headset.)
Bluetooth Profiles
In order to use Bluetooth wireless technology,
devices must be able to interpret certain profiles. This
unit is compatible with following profile.
A2DP (Advanced Audio Distribution Profile)
Pairing your unit and Bluetooth device
Before you start the pairing procedure, make sure the
Bluetooth feature is turned on in to your Bluetooth
device. Refer to your Bluetooth device’s user guide.
Once a pairing operation is performed, it does not
need to be performed again.
1. Select the Bluetooth function by using the
P RADIO&INPUT.
Appears “BT READY” in display window.
2. Operate the Bluetooth device and perform the
pairing operation. When searching for this unit
with the Bluetooth device, a list of the devices
found may appear in the Bluetooth device display
depending on the type of Bluetooth device. Your
unit appears as “LG-HTS(XX:XX)”.
,,Note
XX:XX means the last four digits of BT address.
For example, if your unit has a BT address
such as 9C:02:98:4A:F7:08, you will see “LGHTS(F7:08)” on your Bluetooth device.
3. When this unit is successfully connected with
your Bluetooth device, “PAIRED” appears on the
display window and change to Bluetooth device
name soon.
,,Note
Depending on the Bluetooth device type, some
device have a different pairing way.
4. Listening to music.
To play a music stored on your Bluetooth device,
refer to your Bluetooth device’s user guide.
,,Note
yy If you change the function of the unit, the
Bluetooth function is disconnected, operate
pairing again.
(Bluetooth
Function other than the
Bluetooth)
yy Depending on the Bluetooth device type,
some devices have a different pairing way. For
details about Bluetooth pairing, refer to your
Bluetooth device manual.
4
Operating
yy Version : 4.0
yy Codec : SBC
Listening to music of a
Bluetooth device
32 Operating
,,Note
yy The sound may be interrupted when the
connection interfered by the other electronic
wave.
yy You can not control the Bluetooth device
with this unit, nor can you control this unit
with the Bluetooth device.
yy Pairing is limited one Bluetooth device per
one unit and multi-pairing is not supported.
yy Depending on the type of the device, you may
not be able to use the Bluetooth function.
yy You can enjoy wireless system using phone,
MP3, Notebook, headset, etc..
yy When not connected the Bluetooth, “BT
READY” appears on the display window.
4
yy The Electrical malfunction due to devices
using same frequency such as Medical
equipment, Microwaves or wireless LAN
devices, the connection will be disconnected.
Operating
yy When someone stands and interrupts
communication between Bluetooth device
and the player, the connection will be
disconnected.
yy If the gotten away of the distance between
Bluetooth and the unit, the sound quality
is lower and lower the connection will
disconnect when the space between the
Bluetooth and the unit gets out of the
operating range of Bluetooth.
yy If the function is changed to Bluetooth again
from other function, Bluetooth device is
paired automatically.
yy If the Bluetooth device name contains special
characters, they are displayed as “_” on the
display window.
yy Bluetooth connection are unavailable during
recording.
Operating 33
Auto function change
This unit recognizes input signals such as Bluetooth
and then changes suitable function automatically.
When you try to connect Bluetooth
device
When you try to connect your Bluetooth device to
this unit, Bluetooth function is selected. Play your
music on the Bluetooth device.
,,Note
yy The Bluetooth unit which is not paired
with this unit, cannot use the auto function
change.
yy If you change the this unit’s function to other
function, some Bluetooth unit may try to
connecting in succession. Disconnect the
Bluetooth connection before changing of the
this unit’s function.
4
Operating
34 Operating
AUTO POWER On
This unit automatically turns on by an input source :
Bluetooth.
If you try to connect your Bluetooth device, this unit
turns on and is paired automatically. And then play
your music.
,,Note
yy After the unit is turned on by AUTO POWER
function, it will be automatically turned off if
there is no signal for a certain period of time
from the external device.
yy Depending on the connected device, this
function may not operate.
4
yy If you disconnect Bluetooth connection by
this unit, some Bluetooth devices try to
connect to the unit continually. Therefore it is
recommended to disconnect the connection
before turn off the unit.
Operating
yy If you have already paired with this unit
automatically this unit can turn on by an
input.
yy If you turn off the unit by pressing the power
button for more than 5 seconds, Auto Power
On function is disabled. To activate it, turn on
the unit.
Troubleshooting 35
Troubleshooting
PROBLEM
The unit does not work properly.
CORRECTION
yy Turn off the power of this unit and the connected external device (TV,
Woofer, DVD-player, Amplifier, etc.) and turn it on again.
yy Disconnect the power cord of this unit and the connected external device (TV,
Woofer, DVD-player, Amplifier, etc.) and then try connecting again.
No power
yy Plug the power cord into the wall outlet securely.
No picture
yy Select the appropriate video input mode on the TV so the picture
from the unit appears on the TV screen.
yy Connect the video cables securely to both the TV and unit.
yy Select the correct input mode of the unit so you can hear the sound
from the unit.
There is little or no sound
The DVD picture quality is poor
A DVD/CD will not play
yy Connect the audio cables into the connection terminals correctly.
yy Replace with a new audio cable.
yy Clean the disc using a soft cloth with outward strokes.
yy Insert a disc.
yy Insert a playable disc (check the disc type, colour system and
regional code).
yy Place the disc with the label or printed side facing upwards.
yy Enter your password or change the rating level.
Radio stations can’t be tuned in
properly
yy Check the antenna connection and adjust its position.
yy Attach an external antenna if necessary.
yy Tune to the station manually.
yy Preset some radio stations, see page 28 for details.
yy The remote is not pointed directly at the unit.
Point the remote directly at the unit.
yy The remote is too far from the unit.
Use the remote within 23 feet (7 m) of the unit.
The remote control doesn’t work well
yy There is an obstacle in the path between the remote control and
/ at all
the unit.
Remove the obstacle.
yy The battery in the remote control are flat.
Replace the battery with new ones.
The AUTO POWER function does not
work.
yy Check connection of the external device such as TV, DVD/Blu-Ray
player or Bluetooth device.
yy Depending on the connected device, this function may not operate.
5
Troubleshooting
Humming noise heard while a DVD or yy Clean the disc using a soft cloth with outward strokes.
yy Move unit and audio components further away from your TV.
CD is playing
36 Appendix
Controlling a TV with
the Supplied Remote
Control
You can control your TV using the buttons below.
You can operate your TV with the supplied remote
control.
If your TV is listed in the table below, set the
appropriate manufacturer code.
1. While holding down 1 (TV POWER) button, and
press the manufacturer code for your TV with the
numerical buttons (see the table below).
Manufacturer
Code Number
LG
1(Default), 2
Zenith
1, 3, 4
By pressing
You can
GoldStar
1, 2
1 (TV POWER)
Turn the TV on or off.
Samsung
6, 7
AV/INPUT
Switch the TV’s input source
between the TV and other
input sources.
Sony
8, 9
Hitachi
4
PR/CH W/S
Scan up or down through
memorized channels.
2. Release the 1 (TV POWER) button to complete
setting.
VOL +/–
Adjust the volume of the TV
Depending on your TV, some or all buttons may not
function on the TV, even after entering the correct
manufacturer code. When you replace the batteries
of the remote, the code number you have set may be
reset to the default setting. Set the appropriate code
number again.
,,Note
Depending on the unit being connected, you
may not be able to control your TV using some
of the buttons.
6
Setting up the remote to control
your TV
Appendix
Appendix 37
Maintenance
Handling the Unit
When shipping the unit
Please save the original shipping carton and packing
materials. If you need to ship the unit, for maximum
protection, re-pack the unit as it was originally
packed at the factory.
Keeping the exterior surfaces clean
yy Do not use volatile liquids such as insecticide spray
near the unit.
yy Wiping with strong pressure may damage the
surface.
yy Do not leave rubber or plastic products in contact
with the unit for a long period of time.
Cleaning the unit
Notes on Discs
Handling Discs
Do not touch the playback side of the disc. Hold the
disc by the edges so that fingerprints do not get on
the surface. Never stick paper or tape on the disc.
Storing Discs
After playing, store the disc in its case. Do not
expose the disc to direct sunlight or sources of heat
and never leave it in a parked car exposed to direct
sunlight.
Cleaning Discs
Fingerprints and dust on the disc can cause poor
picture quality and sound distortion. Before playing,
clean the disc with a clean cloth. Wipe the disc from
the center to out.
Do not use strong solvents such as alcohol, benzine,
thinner, commercially available cleaners, or anti-static
spray intended for older vinyl records.
To clean the player, use a soft, dry cloth. If the
surfaces are extremely dirty, use a soft cloth lightly
moistened with a mild detergent solution. Do not use
strong solvents such as alcohol, benzine, or thinner,
as these might damage the surface of the unit.
Maintaining the Unit
6
Appendix
The unit is a high-tech, precision device. If the optical
pick-up lens and disc drive parts are dirty or worn, the
picture quality could be diminished. For details, please
contact your nearest authorized service center.
38 Appendix
Area Code List
Choose an area code from this list.
Area
6
Code Area
Code Area
Code Area
Code
Afghanistan
AF Fiji
FJ Monaco
MC Singapore
SG
Argentina
AR Finland
FI Mongolia
MN Slovak Republic
SK
Australia
AU France
FR Morocco
MA Slovenia
Austria
AT Germany
DE Nepal
NP South Africa
ZA
Belgium
BE Great Britain
GB Netherlands
NL South Korea
KR
Bhutan
BT Greece
GR Antilles
AN Spain
ES
Bolivia
BO Greenland
GL New Zealand
NZ Sri Lanka
LK
Brazil
BR Hong Kong
HK Nigeria
NG Sweden
SE
Cambodia
KH Hungary
HU Norway
Canada
CA India
IN Oman
Chile
CL Indonesia
ID Pakistan
PK Thailand
China
CN Israel
IL Panama
PA Turkey
TR
Colombia
CO Italy
IT Paraguay
PY Uganda
UG
Congo
CG Jamaica
JM Philippines
PH Ukraine
UA
SI
NO Switzerland
CH
OM Taiwan
TW
TH
Costa Rica
CR Japan
JP Poland
PL United States
US
Croatia
HR Kenya
KE Portugal
PT Uruguay
UY
Czech Republic
CZ Kuwait
KW Romania
Denmark
DK Libya
Ecuador
EC Luxembourg
LY Russian
LU Federation
Appendix
Egypt
EG Malaysia
El Salvador
SV Maldives
MY Saudi Arabia
MV Senegal
Ethiopia
ET Mexico
MX
RO Uzbekistan
Vietnam
RU Zimbabwe
SA
SN
UZ
VN
ZW
Appendix 39
Language code List
Use this list to input your desired language for the following initial settings: [Disc Audio],
[Disc Subtitle] and [Disc Menu].
Language
Code
Language
Code
Language
Code
Language
Code
Afar
6565
French
7082
Lithuanian
7684
Sindhi
8368
Afrikaans
6570
Frisian
7089
Macedonian
7775
Singhalese
8373
Albanian
8381
Galician
7176
Malagasy
7771
Slovak
8375
Ameharic
6577
Georgian
7565
Malay
7783
Slovenian
8376
Arabic
6582
German
6869
Malayalam
7776
Spanish
6983
Armenian
7289
Greek
6976
Maori
7773
Sudanese
8385
Assamese
6583
Greenlandic
7576
Marathi
7782
Swahili
8387
Aymara
6588
Guarani
7178
Moldavian
7779
Swedish
8386
Azerbaijani
6590
Gujarati
7185
Mongolian
7778
Tagalog
8476
Bashkir
6665
Hausa
7265
Nauru
7865
Tajik
8471
Basque
6985
Hebrew
7387
Nepali
7869
Tamil
8465
Bengali; Bangla
6678
Hindi
7273
Norwegian
7879
Telugu
8469
Bhutani
6890
Hungarian
7285
Oriya
7982
Thai
8472
Bihari
6672
Icelandic
7383
Panjabi
8065
Tonga
8479
Breton
6682
Indonesian
7378
Pashto, Pushto
8083
Turkish
8482
Bulgarian
6671
Interlingua
7365
Persian
7065
Turkmen
8475
Burmese
7789
Irish
7165
Polish
8076
Twi
8487
Byelorussian
6669
Italian
7384
Portuguese
8084
Ukrainian
8575
Chinese
9072
Japanese
7465
Quechua
8185
Urdu
8582
8590
7282
Kannada
7578
Rhaeto-Romance 8277
Czech
6783
Kashmiri
7583
Rumanian
8279
Vietnamese
8673
Danish
6865
Kazakh
7575
Russian
8285
Volapük
8679
Dutch
7876
Kirghiz
7589
Samoan
8377
Welsh
6789
English
6978
Korean
7579
Sanskrit
8365
Wolof
8779
Esperanto
6979
Kurdish
7585
Scots Gaelic
7168
Xhosa
8872
Estonian
6984
Laothian
7679
Serbian
8382
Yiddish
7473
Faroese
7079
Latin
7665
Serbo-Croatian
8372
Yoruba
8979
Fiji
7074
Latvian, Lettish
7686
Shona
8378
Zulu
9085
Finnish
7073
Lingala
7678
6
Appendix
Croatian
Uzbek
40 Appendix
Trademarks and
Licenses
All other trademarks are trademarks of their
respective owners.
Manufactured under license from Dolby
Laboratories. Dolby and the double-D symbol are
trademarks of Dolby Laboratories.
The terms HDMI and HDMI High-Definition
Multimedia Interface, and the HDMI logo are
trademarks or registered trademarks of HDMI
Licensing LLC in the United States and other
countries.
“DVD Logo” is a trademark of DVD Format/Logo
Licensing Corporation.
6
Appendix
The Bluetooth® word mark and logos are
registered trademarks owned by the Bluetooth
SIG, Inc. and any use of such marks by LG
Electronics is under license.
Other trademarks and trade names are those of
their respective owners.
Notes on Copyrights
yy This product incorporates copyright protection
technology that is protected by U.S. patents
and other intellectual property rights. Use of
this copyright protection technology must be
authorized by Rovi, and is intended for home and
other limited viewing uses only unless otherwise
authorized by Rovi. Reverse engineering or
disassembly is prohibited.
yy Under the U.S. Copyright laws and Copyright
laws of other countries, unauthorized recording,
use, display, distribution, or revision of television
programs, videotapes, BD-ROM discs, DVDs, CDs
and other materials may subject you to civil and/or
criminal liability.
Appendix 41
Specifications
General
Power requirements
Refer to main label.
Power consumption
Refer to main label.
Dimensions (W x H x D)
Approx. 360 mm x 62 mm x 304 mm (With foot)
Operating temperature
5 °C to 35 °C
Operating humidity
5 % to 60 % RH
Bus Power Supply
5 V 0 500 mA
Inputs/ Outputs
VIDEO OUT
1.0 V (p-p), 75 Ω, sync negative, RCA jack x 1
HDMI OUT (video/audio)
19 pin (Type A, HDMI™ Connector ) x 1
ANALOG AUDIO IN
2.0 Vrms (1KHz, 0dB), 600 Ω RCA Jack (L,R) X 1
PORT. IN
0.5 Vrms (3.5 mm stereo jack) x 1
Amplifier
Stereo mode
42 W RMS + 42 W RMS (3 Ω at 1kHz)
Front
Surround mode
42 W RMS + 42 W RMS (3 Ω at 1kHz)
Center
42 W RMS (3 Ω at 1 kHz)
Surround
42 W RMS + 42 W RMS (3 Ω at 1kHz)
Subwoofer
120 W RMS (4 Ω at 60 Hz)
Tuner
87.5 to 108.0 MHz or 87.50 to 108.00 MHz
6
Appendix
FM Tuning Range
42 Appendix
Front Speaker
Type
1 way 1 speaker
Impedance
3Ω
Rated Input Power
42 W RMS
Max. Input Power
84 W RMS
Net Dimensions (W x H x D)
Approx. 103 mm x 111 mm x 94 mm
Rear Speaker
Type
1 way 1 speaker
Impedance
3Ω
Rated Input Power
42 W RMS
Max. Input Power
84 W RMS
Net Dimensions (W x H x D)
Approx. 103 mm x 111 mm x 94 mm
Center Speaker
Type
1 way 1 speaker
Impedance
3Ω
Rated Input Power
42 W RMS
Max. Input Power
84 W RMS
Net Dimensions (W x H x D)
Approx. 103 mm x 111 mm x 94 mm
Passive Subwoofer
6
Appendix
Type
1 Way 1 Speaker
Impedance
4Ω
Rated Input Power
120 W RMS
Max. Input Power
240 W RMS
Net Dimensions (W x H x D)
Approx. 156 mm x 325 mm x 320 mm
yy Design and specifications are subject to change without notice.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising