LG | BBL1 | Owner's Manual | LG BBL1 Owner’s Manual

LG BBL1 Owner’s Manual
OWNER’S MANUAL
CLEANSING
BOOST
MODE
Galvanic Ion
Booster
Please read this manual carefully before operating
your set and retain it for future reference.
MODEL
BBL1
www.lg.com
MFL71182271
1906_Rev01
BL1.ASGPLLK_FULL_ENG_MFL71182271.indd 1
Copyright © 2019 LG Electronics Inc.
All Rights Reserved.
2019-06-11
2:02:29
2
Table of Contents
Table of Contents
Skin Safety Information . 3
Voice Assistance Setting . . . . 30
Recommendations for safe use
of the product . . . . . . . . . . . . . . . . . 3
Language Setting . . . . . . . . . . . . 30
1
2
Setting up . . . . . . . . . 10
Unique features . . . . . . . . . . . . . 10
Notification . . . . . . . . . . . . . . . . . . 12
Parts . . . . . . . . . . . . . . . . . . . . . . . . . 13
4
Troubleshooting . . . . . . . . . . . . . 31
5
Operation . . . . . . . . . . 16
Cleansing Mode . . . . . . . . . . . . . 16
Appendix . . . . . . . . . . 32
Specifications . . . . . . . . . . . . . . . . 32
Maintenance . . . . . . . . . . . . . . . . . 33
Unit description . . . . . . . . . . . . . . 14
3
Troubleshooting . . . . 31
Handling the Unit . . . . . . . . . . 33
6
Precautions for use . 34
Safety Information . . . . . . . . . . . 34
Absorption promotion Mode
(BOOST) . . . . . . . . . . . . . . . . . . . . . 21
Charging the battery . . . . . . . . 24
Charging . . . . . . . . . . . . . . . . . . . 24
Checking the charging status . 26
Checking battery status . . . 27
How to use the unit . . . . . . . . . 28
Changing Care mode . . . . . . 28
BL1.ASGPLLK_FULL_ENG_MFL71182271.indd 2
2019-06-11
2:02:29
1
Skin Safety Information
Skin Safety Information
3
Recommendations for safe use of the product
BL1.ASGPLLK_FULL_ENG_MFL71182271.indd 3
yy Do not use this device
during the last two months
if your skin is recovering
due to skin related
procedures, cosmetic
surgery, or procedures
for hair loss. Please use it
after consultation with a
specialist.
yy Device to be used as a facial
treatments only, it is not
recommended for use on
body.
yy Do not use the device
on mucous membranes
including oral cavity. Do not
place this device directly on
your ear.
yy When using this unit on the
neck, avoid the part of the
neck where the thyroid is
located.
2019-06-11
2:02:29
4
Skin Safety Information
yy Please use the device after consultation with a specialist surely.
-- Cardiovascular disease
-- Endocrine abnormality
-- Sensory nervous system
abnormality
-- Skin disease
-- Ophthalmology and surgery
(LASIK, LASEK, etc.)
-- Infectious disease
-- A person with epileptic
symptoms
-- A person taking hormone
imbalance medication
-- If you have other illnesses,
name of a diseases, or
abnormalities in your body
-- Undergoing dermatology
related treatment or having
skin problems
-- Allergies, acne, skin infections,
skin related procedures,
cosmetic surgery, procedures
for hair loss
-- In case of skin disease or skin
irritation
-- In case of implanted an
electronic devices such as
cardiac pacemakers or wear
to metal prosthetics
yy Depending on individual skin condition, the device may cause a
variety of skin irritations. If such irritation persists, please reduce
the number of uses.
BL1.ASGPLLK_FULL_ENG_MFL71182271.indd 4
2019-06-11
2:02:29
BL1.ASGPLLK_FULL_ENG_MFL71182271.indd 5
Skin Safety Information
5
yy Device use not
recommended
for pregnant,
menstruating or
lactating women.
(Unstable hormonal
balance may cause
temporary skin
issues.)
yy Do not allow people
to use who can not
clearly express their
own will, including
infants.
yy Do not use this unit
immediately after
shaving.
2019-06-11
2:02:29
6
Skin Safety Information
BL1.ASGPLLK_FULL_ENG_MFL71182271.indd 6
yy Do not use this
unit while driving or
walking.
yy Do not use the
head with the head
stopped at one place,
but please use it
according to the guide
of this manual.
yy Please follow
recommended hours
of use when long time
use because there is
a possibility of a lowtemperature burn.
2019-06-11
2:02:29
BL1.ASGPLLK_FULL_ENG_MFL71182271.indd 7
Skin Safety Information
7
yy Before use, please
remove the precious
metal parts that this
unit touches.
yy Do not use the device
for purposes other
than those set out in
this guide.
2019-06-11
2:02:29
8
Skin Safety Information
Q&A
Q1
“ What cosmetics should I buy and use for
each mode in the product? ”
To make your skin cleaner, it is effective to use Cleansing (cleansing)
mode before using Boost (absorption promotion) mode. Please use
water-soluble products such as moisturizing gel that fits your skin.
Boost (absorption promotion) mode is a process that helps the active
ingredients in cosmetics penetrate the skin. It is recommended to
use the cosmetics that were used in the past or cosmetics for your
skin type. Please pay attention to using cosmetics that contain the
following ingredients as it may reduce the effect: denatured alcohol,
sunscreen, retinol, oil
Q2
“ How can I know if this unit is fit for my
skin? ”
Before using it on your face, it is recommended to test the cosmetics
you are wearing with the unit on inside your arm.
BL1.ASGPLLK_FULL_ENG_MFL71182271.indd 8
2019-06-11
2:02:29
Skin Safety Information
Q3
9
“ What should I do if I feel dry? ”
-- Please reduce the frequency of use in
a week.
-- It is recommended to use moisturizing
cream or mask pack for moisturizing
immediately after use.
-- If you are taking medication, consult
your health care professional before
using this medicine to induce skin
dryness.
BL1.ASGPLLK_FULL_ENG_MFL71182271.indd 9
2019-06-11
2:02:30
2
Setting up
10
Setting up
Unique features
Complex absorption promotion by two modes
Two modes of cleansing and absorption promotion are managing
deep into the skin, opening the skin barrier to clean the skin and
pushing the cosmetic ingredients to promote absorption.
yy Cleansing Mode (CLEANSING)
-- It is a mode that helps deep cleansing and it opens the skin
barrier with heat and cleans the skin with positive (+) ion.
-- It is effective to use this mode before using absorption
promotion mode.
yy Absorption promotion Mode (BOOST)
-- Warm massage: It relieves skin tension and gently applies
cosmetics to help naturally absorb.
-- Ultrasonic wave: Ultrasonic vibration makes transient cracks
in the stratum corneum and it helps penetrating of the active
ingredients of cosmetics.
-- Galvanic ion: It is negative (-) ion mode that helps the skin
absorb the cosmetics by pushing the active ingredient of
cosmetics with negative ion into the skin.
BL1.ASGPLLK_FULL_ENG_MFL71182271.indd 10
2019-06-11
2:02:30
Setting up
11
Skin contact safety material and Head protection cap
-- The head (skin contact area) is used with medical material which is
safe for skin.
-- The Head protection cap protects the head part, enabling clean
storage management.
Triangle head design
You can easily manage curved areas such as the eyes / nose area.
Easy and Simple to use
-- As voice guidance, guide how to care easily during use.
-- This product is a wireless product with USB charging method and
can be used during charging.
BL1.ASGPLLK_FULL_ENG_MFL71182271.indd 11
2019-06-11
2:02:30
12
Setting up
Notification
Symbols used in this manual
,,Note
Indicates special notes and operating features.
>>Caution
Indicates cautions for preventing possible damages from abuse.
BL1.ASGPLLK_FULL_ENG_MFL71182271.indd 12
2019-06-11
2:02:30
Setting up
13
Parts
CLEANSING
BOOST
Head
protection cap
Charging cradle
Unit
Charging adapter
USB cable
(C Type)
Pouch
Owner’s manual /
Quick start guide
MODE
BL1.ASGPLLK_FULL_ENG_MFL71182271.indd 13
2019-06-11
2:02:31
14
Setting up
Unit description
Unit
Front
Rear
Head
1
(POWER)
MODE
LED
CLEANSING
BOOST
MODE
MODE
Button
Battery
Status
LED
BL1.ASGPLLK_FULL_ENG_MFL71182271.indd 14
Skin contact
electrode
2019-06-11
2:02:31
Setting up
15
Bottom
Speaker
USB port
(For charging)
Charging
pins
Charging cradle
Charging
pins
USB port
(For charging)
BL1.ASGPLLK_FULL_ENG_MFL71182271.indd 15
2019-06-11
2:02:31
3
Operation
16
Operation
Cleansing Mode
To make your skin cleaner, it is effective to use this mode before using
absorption promotion mode.
Recommended usage period
Recommend product use is once a day by mode. Using more than
twice a day may cause a burning sensation on skin.
Using product
Recommend using water-soluble products such as moisturizing gel
for your skin.
How to use
1. Start the cleansing mode after remove makeup and wash the face.
2. After wash the face, please use this appliance with plenty of water
gel on the area of your face or device head to be used.
BL1.ASGPLLK_FULL_ENG_MFL71182271.indd 16
2019-06-11
2:02:31
Operation 17
3. Gently wrap the skin contact electrode on the back of this unit
so that it touches the palm of your hand. (If you do not touch the
skin contact electrode, the device will not work.)
4. Press the 1 (Power) button to turn on the power, then check
the cleansing mode. Press the MODE button to change to the
cleansing mode in case of the absorption promotion mode.
BOOST
CLEANSING
BL1.ASGPLLK_FULL_ENG_MFL71182271.indd 17
MODE
2019-06-11
2:02:31
18
Operation
5. Follow the voice guidance function, slowly cleanse your face like
gently wiping away from around your eyes.
- Cleansing consists of 5 steps for 3 minutes.
(Left cheek Right cheek Nose Chin Forehead
Power off)
b
a
When you hear the voice guidance or a
sound effect, use the device to gently
cleanse your both cheeks area from
bottom to top and your under both eyes
from inside to outside for about 30
seconds.
When you hear the voice guidance or
a sound effect, slowly move the device
head from your cheek to your nose.
Gently cleanse the nose area from
bottom to top for about 45 seconds.
c
BL1.ASGPLLK_FULL_ENG_MFL71182271.indd 18
2019-06-11
2:02:32
Operation 19
When you hear the voice guidance or
a sound effect, slowly move the device
head from your nose to your chin.
Gently cleanse the chin area from
bottom to top for about 30 seconds.
d
e
When you hear the voice guidance or
a sound effect, gently move the device
head around the forehead from bottom
to top for about 45 seconds.
This unit automatically turns off after
cleansing.
6. Rinse your face sufficiently with tepid water after cleansing.
7. After use, wipe the unit with a dry towel, and put the head
protection cap on the head and store the unit.
BL1.ASGPLLK_FULL_ENG_MFL71182271.indd 19
2019-06-11
2:02:32
20
Operation
,,Note
yy It is effective to use this mode before using absorption
promotion mode.
yy The water gel is sold separately. We recommend using a
moisturizing gel for your skin type.
yy If you set the voice guidance function to mute, the unit
doesn’t provide voice guidance and sound effect.
BL1.ASGPLLK_FULL_ENG_MFL71182271.indd 20
2019-06-11
2:02:32
Operation 21
Absorption promotion Mode (BOOST)
The complex function of the mode helps the penetration of active
substances contained in cosmetics.
Recommended usage period
Recommend product use is once a day by mode. Using more than
twice a day may cause a burning sensation on skin.
Using product
Recommend using previously used cosmetics or cosmetics for your
skin type.
How to use
1. Wash your face before starting absorption promotion mode.
2. Before using this product, apply cosmetics (such as vitamin C
serum) to pat on the cleansed face to permeate.
BL1.ASGPLLK_FULL_ENG_MFL71182271.indd 21
2019-06-11
2:02:32
22
Operation
3. Gently wrap the skin contact electrode on the back of this unit
so that it touches the palm of your hand. (If you do not touch the
skin contact electrode, the device will not work.)
4. Press the 1 (Power) button to turn on the power, then press the
MODE button to select absorption promotion mode.
BOOST
CLEANSING
BL1.ASGPLLK_FULL_ENG_MFL71182271.indd 22
MODE
2019-06-11
2:02:32
Operation 23
5. Slowly care the area of your desired like gently wiping from top to
bottom depending on the skin texture.
6. This unit automatically turns off after 3 minutes of care time.
7. After use, wipe the unit with a dry towel, and put the head
protection cap on the head and store the unit.
BL1.ASGPLLK_FULL_ENG_MFL71182271.indd 23
2019-06-11
2:02:33
24
Operation
Charging the battery
Charging
Charge the battery enough before using the unit.
>>Caution
yy Always use the provided charging adapter.
yy Using other charging adapters may cause malfunction and can
not be repaired.
CLEANSING
BOOST
MODE
d
b
a
c
1. Connect the charging adapter using USB cable.
2. Connect USB cable to the charging cradle.
3. Connect the charging adapter to the power outlet.
4. Charging is started, when you connect the unit into the charging
pins of charging cradle. Refer to Checking the charging status and
Checking battery status regarding the charging status of battery.
(Page 26-27)
BL1.ASGPLLK_FULL_ENG_MFL71182271.indd 24
2019-06-11
2:02:33
Operation 25
,,Note
yy This unit can be used during charging.
yy You can charge the unit to USB port (for charging) on the
bottom of unit.
yy After the battery is fully charged, unplug the power to save
energy.
yy The unit can be charged with a secondary battery with a
current output of 1 A and more at 5 V voltage.
yy Keep the charging cradle and the charging pins of unit free of
moisture. Moisture can cause the charging pins to corrode.
BL1.ASGPLLK_FULL_ENG_MFL71182271.indd 25
2019-06-11
2:02:33
26
Operation
Checking the charging status
When you place the unit on the
charging cradle, you can check the
charge status of the battery through
the battery status LED.
LED
Status
Red
Battery is charging.
Green
Battery is fully charged.
BL1.ASGPLLK_FULL_ENG_MFL71182271.indd 26
2019-06-11
2:02:33
Operation 27
Checking battery status
When you disconnect the unit from the charging cradle, you can
check the charge status of the battery through the battery status
LED.
If the power turned on, you can check the charging status by pressing
1 button.
The battery status LED will change depending on the battery
charging status.
LED
Status
The battery is low and needs to be charged.
Red
(blinking)
Red
Green
“Battery is low.” An voice guidance or sound
effect is provided and the red LED blinks. Then
the power is automatically turned off.
Battery is low.
The red LED is turned on and maintained.
Battery is charged.
The green light turns on for three seconds and
then disappears.
,,Note
If you set the voice guidance function to mute, the unit doesn’t
provide voice guidance and sound effect.
BL1.ASGPLLK_FULL_ENG_MFL71182271.indd 27
2019-06-11
2:02:33
28
Operation
How to use the unit
Changing Care mode
CLEANSING
BOOST
Pressing the MODE button while
this unit is turned on changes the
care mode. Each MODE LED lights
according to the care mode.
MODE
Mode
Status and effect
CLEANSING
(Cleansing)
To make your skin cleaner, it is effective to use
this mode before using absorption promotion
mode.
BOOST
(Absorption
promotion)
The complex function of the mode helps the
penetration of active substances contained in
cosmetics.
BL1.ASGPLLK_FULL_ENG_MFL71182271.indd 28
2019-06-11
2:02:33
Operation 29
,,Note
yy The unit operates only when it is in contact with skin.
When using this unit to care for others, the caregiver should
hold this device with one hand in contact with the skincontact electrode, and at the same time, the other hand must
be in contact with the care recipient’s skin, such as the face,
hands, or the like. This will cause the unit to operate normally.
yy If the unit is aparted from the skin, it will be paused and the
MODE LED indicator in the current mode will blink.
yy Care time will continue even if the unit is not in contact with
the skin.
yy This unit automatically turns off after 3 minutes of care time.
yy Vibration periodically sounds for purposes of notification
during operating.
BL1.ASGPLLK_FULL_ENG_MFL71182271.indd 29
2019-06-11
2:02:33
4
30
Operation
Voice Assistance Setting
BOOST
CLEANSING
MODE
With power on, press and hold
the 1 (Power) button for about
5 seconds to cycle through each
mode:
(Voice assistance Sound
effect guide Turn off guide
(Mute))
Language Setting
BOOST
CLEANSING
MODE
BL1.ASGPLLK_FULL_ENG_MFL71182271.indd 30
With power on, press and hold
both 1 (Power) button and the
MODE button simultaneously
for 3 seconds to cycle through
each language:
(English Chinese Korean)
2019-06-11
2:02:34
4
Troubleshooting
Troubleshooting
31
Troubleshooting
Symptoms
The unit does not
operate normally.
Cause & Solution
yy Make sure that you have pressed the
on/off button properly.
yy Charge the unit according to the
instructions in this user manual.
yy Check if the battery status LED on the
unit lights up to make sure the unit is
charging.
No Power.
yy The battery is discharged. Recharge the
battery.
yy Connect the unit to the power supply
with the charging adapter.
yy Check the charger to which you connect
the unit is live.
yy Check whether the voltage indicated on
the unit corresponds to the local mains
voltage.
Temperature of unit
rises during use.
yy This unit has a thermal function to
increase the effect.
yy But, if you feel the unit is much hotter
than your body temperature, then stop
the skin care and contact LG Electronics
customer care center.
BL1.ASGPLLK_FULL_ENG_MFL71182271.indd 31
2019-06-11
2:02:34
5
Appendix
32
Appendix
Specifications
Power supply (AC Adapter) :
-- Model : ADS-12BA-06Y 05010EPB C
-- Manufacturer : Shenzhen Honor Electronic Co., Ltd.
-- Input : 100 - 240 V ~ 50 / 60 Hz Max. 0.3 A
-- Output : 5 V 0 2 A
Dimensions (W x H x D) :
-- Approx. 40 mm x 163.2 mm x 42 mm (Unit)
-- Approx. 71.8 mm x 25.4 mm x 71.8 mm (Charging cradle)
Operating temperature : 5 °C to 35 °C
Operating humidity : 0 % to 90 %
Recommended usage times : once per day
※ It is available for about 1 and a half hours when using the
Absorption promotion mode after charge once.
※ Usage time may vary depending on the warranty period of the
battery, ambient temperature, or usage conditions.
Full charging time : Within 3 hours
※ Charging time may vary depending on the remaining capacity of
the battery, ambient temperature, or charging conditions.
yy Design and specifications are subject to change without notice.
BL1.ASGPLLK_FULL_ENG_MFL71182271.indd 32
2019-06-11
2:02:34
Appendix 33
Maintenance
Handling the Unit
When shipping the unit
Please save the original shipping carton and packing materials. If you
need to ship the unit, for maximum protection, re-pack the unit as it
was originally packed at the factory.
Keeping the exterior surfaces clean
yy Do not use volatile liquids such as insecticide spray near the unit.
yy Wiping with strong pressure may damage the surface.
yy Do not leave rubber or plastic products in contact with the unit for
a long period of time.
Cleaning the unit
To clean the unit, use a soft, dry cloth. If the surfaces are extremely
dirty, use a soft cloth lightly moistened with a mild detergent solution.
Do not use strong solvents such as alcohol, benzine, or thinner, as
these might damage the surface of the unit.
BL1.ASGPLLK_FULL_ENG_MFL71182271.indd 33
2019-06-11
2:02:34
6
Precautions for use
34
Precautions for use
Safety Information
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT
REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
This lightning flash with arrowhead symbol within an
equilateral triangle is intended to alert the user to the
presence of uninsulated dangerous voltage within
the product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to
persons.
The exclamation point within an equilateral triangle
is intended to alert the user to the presence of
important operating and maintenance (servicing)
instructions in the literature accompanying the
product.
BL1.ASGPLLK_FULL_ENG_MFL71182271.indd 34
2019-06-11
2:02:35
Precautions for use
35
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO
NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
WARNING: Do not install this equipment in a confined space such as
a book case or similar unit.
CAUTION: Do not use high voltage products around this product.
(ex. Electrical swatter) This product may malfunction due to electrical
shock.
CAUTION: No naked flame sources, such as lighted candles, should
be placed on the apparatus.
CAUTION: The apparatus should not be exposed to water (dripping
or splashing) and no objects filled with liquids, such as vases, should
be placed on the apparatus.
BL1.ASGPLLK_FULL_ENG_MFL71182271.indd 35
2019-06-11
2:02:35
36
Precautions for use
CAUTION: Do not block any ventilation openings. Install in accordance
with the manufacturer’s instructions.
Slots and openings in the cabinet are provided for ventilation and to
ensure reliable operation of the product and to protect it from over
heating. The openings should never be blocked by placing the product
on a bed, sofa, rug or other similar surface. This product shall not
be placed in a built-in installation such as a bookcase or rack unless
proper ventilation is provided or the manufacturer’s instruction has
been adhered to.
NOTICE: For safety marking information including product
identification and supply ratings, please refer to the main label on the
bottom or the other surface of the product.
1.
WARNING: Do not use this appliance near bathtubs,
showers, basins or other vessels containing water.
2. The appliance is not to be used by persons (including children aged
from 8 years) with reduced physical, sensory or mental capabilities,
or lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a person
responsible for their safety.
3. Children being supervised not to play with the appliance.
4. Cleaning and user maintenance shall not be made by children
without supervision.
5. This appliance is only to be used with the battery charger provided.
6. For a part of class III construction supplied from a detachable power
supply unit, the instructions state that the appliance is only to be used
with the unit provided.
7. Instructions for class III appliances state that it must only be
supplied at SELV.
BL1.ASGPLLK_FULL_ENG_MFL71182271.indd 36
2019-06-11
2:02:35
Precautions for use
37
CAUTION concerning the Power Cord
The Power Plug is the disconnecting device. In case of an emergency,
the Power Plug must remain readily accessible.
Check the specification page of this owner’s manual to be certain of
the current requirements.
Do not overload wall outlets. Overloaded wall outlets, loose or
damaged wall outlets, extension cords, frayed power cords, or
damaged or cracked wire insulation are dangerous. Any of these
conditions could result in electric shock or fire. Periodically examine
the cord of your device, and if its appearance indicates damage or
deterioration, unplug it, discontinue use of the device, and have
the cord replaced with an exact replacement part by an authorized
service center. Protect the power cord from physical or mechanical
abuse, such as being twisted, kinked, pinched, closed in a door, or
walked upon. Pay particular attention to plugs, wall outlets, and the
point where the cord exits the device.
CAUTION: Only use the AC adapter supplied with this device. Do not
use a power supply from another device or another manufacturer.
Using any other power cable or power supply may cause damage to
the device and void your warranty.
CAUTION when using this product in environments of low humidity
yy It may cause static electricity in environments of low humidity.
yy It is recommended to use this product after touching any metal
object which conducts electricity.
BL1.ASGPLLK_FULL_ENG_MFL71182271.indd 37
2019-06-11
2:02:35
38
Precautions for use
For models using a battery
This device is equipped with a portable battery or accumulator.
How to Safely remove the batteries or the battery pack from
the equipment: To Remove the old batteries or battery pack, follow
the assembly steps in reverse order. To prevent contamination of
the environment and bring on possible threat to human and/or
animal health, the old batteries or the battery pack must be put
in an appropriate container at designated collection points. Do not
dispose of batteries or battery pack together with other waste. It
is recommended that you use local, free reimbursement systems
batteries or battery packs, (may not be available in your area). The
batteries or the battery pack should not be exposed to excessive heat
such as sunshine, fire or the like.
Symbols
~
0
Refers to alternating current (AC).
Refers to direct current (DC).
Refers to class II equipment.
1
Refers to stand-by.
!
Refers to “ON” (power).
Refers to dangerous voltage.
BL1.ASGPLLK_FULL_ENG_MFL71182271.indd 38
2019-06-11
2:02:35
Precautions for use
39
POWER: This unit operates on a mains supply of
100 - 240 V ~ 50 / 60 Hz.
Wiring: This unit is supplied with a BS 1363 approved main plug.
When replacing the fuse, always use a fuse of the same rating
and approved to BS 1362. Never use this plug with the fuse cover
omitted. To obtain a replacement fuse cover contact your dealer. If
the type of plug supplied is not suitable for the mains sockets in your
home, then the plug should be removed and a suitable type fitted.
Please refer to the wiring instructions below:
Warning: A mains plug removed from the mains lead of this unit
must be destroyed. A mains plug with bared wires is hazardous if
inserted in a mains socket. Do not connect either wire to the earth
pin, marked with the letter E or with the earth symbol 6 or coloured
green or green and yellow. If any other plug is fitted, use same rating
of fuse in the plug.
Important: The wires in this mains lead are coloured in accordance
with the following codes:
- BLUE: NEUTRAL, BROWN: LIVE - As the colours of the wires in
the mains lead of this unit may not correspond with the coloured
marking identifying the terminals in your plug, proceed as follows:
The wire which is coloured blue must be connected to the terminal
which is marked with the letter N or coloured black. The wire which is
coloured brown must be connected to the terminal which is marked
with the letter L or coloured red.
BL1.ASGPLLK_FULL_ENG_MFL71182271.indd 39
2019-06-11
2:02:35
40
Precautions for use
Product storage and maintenance
yy Do not drop the charging adapter into a drain or sink or place it in
a place where it may fall into water or other liquids. Do not use a
charging cradle in the shower or immerse in water.
yy Do not touch the charging cradle or cable that is in the water and
disconnect the charging adapter immediately.
yy Keep the cord away from heated surfaces.
yy Always use the provided charging adapter.
yy If not used for a long time, charge the battery at least once every
3 months to maintain battery life.
yy Do not prick the unit gap with sharp metal objects such as keys,
hairpins, necklaces, or nails.
yy Please keep it in the packing box. If it is necessary to carry
the product, please repack it in the packing box at the time of
purchase.
yy Do not place volatile liquids, such as pesticides, near them.
yy Wiping the unit surface hard can damage the unit.
yy Do not place plastic products or rubber on the unit for a long time.
yy To clean the unit, use a soft, dry cloth. If the surface is too dirty,
use a soft cloth with some detergent or water. Do not use strong
chemicals such as alcohol, benzene or thinner as they may
deteriorate the surface of the unit.
yy Do not put the unit in dishwasher, oven, washing machine.
BL1.ASGPLLK_FULL_ENG_MFL71182271.indd 40
2019-06-11
2:02:35
BL1.ASGPLLK_FULL_ENG_MFL71182271.indd 41
2019-06-11
2:02:35
BL1.ASGPLLK_FULL_ENG_MFL71182271.indd 42
2019-06-11
2:02:35
BL1.ASGPLLK_FULL_ENG_MFL71182271.indd 43
2019-06-11
2:02:35
BL1.ASGPLLK_FULL_ENG_MFL71182271.indd 44
2019-06-11
2:02:36
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising