LG | 43LK5910 | User manual | LG 43LK5910 Руководство пользователя

LG 43LK5910 Руководство пользователя
OWNER’S MANUAL
Safety and Reference
LED TV*
* LG LED TV applies LCD screen with LED backlights.
Please read this manual carefully before operating your set and
retain it for future reference.
*MFL70319809*
(1803-REV01)
www.lg.com
Copyright © 2018 LG Electronics Inc. All Rights Reserved.
Warning! Safety Instructions
ENGLISH
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE.
REFER TO QUALIFIED SERVICE PERSONNEL.
This symbol is intended to alert the user to the presence of
uninsulated “dangerous voltage” within the product’s
enclosure that may be of sufficient magnitude to constitute a risk
of electric shock to persons.
This symbol is intended to alert the user to the presence of
important operating and maintenance (servicing)
instructions in the literature accompanying the appliance.
WARNING : TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK,
DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
• TO PREVENT THE SPREAD OF FIRE, KEEP CANDLES OR OTHER ITEMS
WITH OPEN FLAMES AWAY FROM THIS PRODUCT AT ALL TIMES.
• Do not place the TV and/or remote control in the following
environments:
-- Keep the product away from direct sunlight.
-- An area with high humidity such as a bathroom
-- Near any heat source such as stoves and other devices that
produce heat.
-- Near kitchen counters or humidifiers where they can easily be
exposed to steam or oil.
-- An area exposed to rain or wind.
-- Do not expose to dripping or splashing and do not place objects
filled with liquids, such as vases, cups, etc. on or over the
apparatus (e.g., on shelves above the unit).
-- Near flammable objects such as gasoline or candles, or expose
the TV to direct air conditioning.
-- Do not install in excessively dusty places.
Otherwise, this may result in fire, electric shock, combustion/
explosion, malfunction or product deformation.
2
• Ventilation
-- Install your TV where there is proper ventilation. Do not install in
a confined space such as a bookcase.
-- Do not install the product on a carpet or cushion.
-- Do not block or cover the product with cloth or other materials
while unit is plugged in.
• Take care not to touch the ventilation openings. When watching
the TV for a long period, the ventilation openings may become hot.
• Protect the power cord from physical or mechanical abuse, such as
being twisted, kinked, pinched, closed in a door, or walked upon.
Pay particular attention to plugs, wall outlets, and the point where
the cord exits the device.
• Do not move the TV whilst the Power cord is plugged in.
• Do not use a damaged or loosely fitting power cord.
• Be sure do grasp the plug when unplugging the power cord. Do
not pull on the power cord to unplug the TV.
• Do not connect too many devices to the same AC power outlet as
this could result in fire or electric shock.
• Disconnecting the Device from the Main Power
-- The power plug is the disconnecting device. In case of an
emergency, the power plug must remain readily accessible.
• Do not let your children climb or cling onto the TV. Otherwise, the
TV may fall over, which may cause serious injury.
• Outdoor Antenna Grounding (Can differ by country):
-- If an outdoor antenna is installed, follow the precautions below.
An outdoor antenna system should not be located in the vicinity
of overhead power lines or other electric light or power circuits,
or where it can come in contact with such power lines or circuits
as death or serious injury can occur.
Be sure the antenna system is grounded to provide some
protection against voltage surges and built-up static charges.
Section 810 of the National Electrical Code (NEC) in the U.S.A.
provides information with respect to proper grounding of the
mast and supporting structure, grounding of the lead-in wire
to an antenna discharge unit, size of grounding conductors,
location of antenna discharge unit, connection to grounding
electrodes and requirements for the grounding electrode.
Antenna grounding according to the National Electrical Code,
ANSI/NFPA 70
• Handle the adapter carefully to avoid dropping or striking it. An
impact could damage the adapter.
• To reduce the risk of fire or electrical shock, do not touch the TV
with wet hands. If the power cord prongs are wet or covered with
dust, dry the power plug completely or wipe dust off.
• Batteries
-- Store the accessories (battery, etc.) in a safe location out of the
reach of children.
-- Do not short circuit, disassemble, or allow the batteries to
overheat. Do not dispose of batteries in a fire. Batteries should
not be exposed to excessive heat.
• Moving
-- When moving, make sure the product is turned off, unplugged,
and all cables have been removed. It may take 2 or more people
to carry larger TVs. Do not press or put stress on the front panel
of the TV. Otherwise, this may result in product damage, fire
hazard or injury.
• Keep the packing anti-moisture material or vinyl packing out of the
reach of children.
• Do not allow an impact shock, any objects to fall into the product,
and do not drop anything onto the screen.
• Do not press strongly upon the panel with a hand or a sharp
object such as a nail, pencil, or pen, or make a scratch on it. It may
cause damage to screen.
• Cleaning
-- When cleaning, unplug the power cord and wipe gently with a
soft/dry cloth. Do not spray water or other liquids directly on the
TV. Do not clean your TV with chemicals including glass cleaner,
any type of air freshener, insecticide, lubricants, wax (car,
industrial), abrasive, thinner, benzene, alcohol etc., which can
damage the product and/or its panel. Otherwise, this may result
in electric shock or product damage.
ENGLISH
• Grounding (Except for devices which are not grounded.)
-- TV with a three-prong grounded AC plug must be connected to
a three-prong grounded AC outlet. Ensure that you connect the
earth ground wire to prevent possible electric shock.
• Never touch this apparatus or antenna during a lightning storm.
You may be electrocuted.
• Make sure the power cord is connected securely to the TV and wall
socket if not secured damage to the Plug and socket may occur and
in extreme cases a fire may break out.
• Do not insert metallic or inflammable objects into the product. If a
foreign object is dropped into the product, unplug the power cord
and contact the customer service.
• Do not touch the end of the power cord while it is plugged in. You
may be electrocuted.
• If any of the following occur, unplug the product
immediately and contact your local customer service.
-- The product has been damaged.
-- If water or another substance enters the product (like an AC
adapter, power cord, or TV).
-- If you smell smoke or other odors coming from the TV
-- When lightning storms or when unused for long periods of time.
Even the TV is turned off by remote control or button, AC power
source is connected to the unit if not unplugged in.
• Do not use high voltage electrical equipment near the TV (e.g., a
bug zapper). This may result in product malfunction.
• Do not attempt to modify this product in any way without written
authorization from LG Electronics. Accidental fire or electric shock
can occur. Contact your local customer service for service or repair.
Unauthorized modification could void the user’s authority to
operate this product.
• Use only an authorized attachments / accessories approved by
LG Electronics. Otherwise, this may result in fire, electric shock,
malfunction, or product damage.
• Never disassemble the AC adapter or power cord. This may result in
fire or electric shock.
3
Preparing
Separate Purchase
ENGLISH
• If the TV is turned on for the first time after it was shipped from the
factory, initialization of the TV may take a few minutes.
• Image shown may differ from your TV.
• Your TV’s OSD (On Screen Display) may differ slightly from that
shown in this manual.
• The available menus and options may differ from the input source
or product model that you are using.
• New features may be added to this TV in the future.
• The device must be easily accessed to a location outlet near the
access. Some devices are not made by turning on / off button,
turning off the device and unplugging the power cord.
• The items supplied with your product may vary depending on the
model.
• Product specifications or contents of this manual may be changed
without prior notice due to upgrade of product functions.
• For an optimal connection, HDMI cables and USB devices should
have bezels less than 10 mm thick and 18 mm width. Use an
extension cable that supports USB 2.0 if the USB cable or USB
memory stick does not fit into your TV’s USB port.
B
B
A
A
*A <
= 10 mm
*B <
= 18 mm
• Use a certified cable with the HDMI logo attached.
• If you do not use a certified HDMI cable, the screen may not display
or a connection error may occur. (Recommended HDMI Cable Types)
-- High-Speed HDMI®/TM cable (3 m or less)
-- High-Speed HDMI®/TM cable with Ethernet (3 m or less)
• How to use the ferrite core (Depending on model)
-- Use the ferrite core to reduce the electromagnetic interference in
the power cord. Wind the power cord on the ferrite core once.
[Wall side]
10 cm (+ / -2 cm)
4
[TV side]
Separate purchase items can be changed or modified for quality
improvement without any notification. Contact your dealer to buy these
items. These devices only work with certain models.
The model name or design may be changed depending on the upgrade
of product functions, manufacturer’s circumstances or policies.
Magic Remote Control
(Depending on model)
AN-MR18BA
Check whether your TV model supports Bluetooth in the Wireless
Module Specification to verify whether it can be used with the Magic
Remote.
Wall Mounting Bracket
(Depending on model)
Make sure to use screws and wall mount bracket that meet the VESA
standard. Standard dimensions for the wall mount kits are described in
the following table.
A
B
Lifting and moving the TV
55SK81*
55SK80*
55UK75*
55UK65*
55UK69*
55UK67*
49/55UK64*
49/55UK63*
49LK59*
49LK60*
49/55UK62*
300 x 300
M6
4
OLW480B
MSW240
Please note the following advice to prevent the TV from being scratched
or damaged and for safe transportation regardless of its type and size.
ENGLISH
49SK85*
49SK81*
49SK80*
49UK75*
43/50UK65*
43/50UK69*
43/50UK67*
Model
43/50UK64*
43/50UK63*
32/43/49LK61*
32/43/49LK62*
43LK59*
43LK60*
43UK62*
VESA (A x B) (mm)
200 x 200
Standard screw
M6
Number of screws
4
LSW240B
Wall mount bracket
MSW240
55/65SK95*
55/65SK85*
65SK81*
65SK80*
65UK75*
Model
65UK65*
65UK69*
65UK67*
65UK64*
65UK63*
60UK62*
VESA (A x B) (mm)
300 x 300
Standard screw
M6
Number of screws
4
Wall mount bracket OLW480B
• It is recommended to move the TV in the box or packing material
that the TV originally came in.
• Before moving or lifting the TV, disconnect the power cord and
all cables.
• When holding the TV, the screen should face away from you to
avoid damage.
• Hold the top and bottom of the TV frame firmly. Make sure not to
hold the transparent part, speaker, or speaker grill area.
75SK81*
70/75/86UK65*
70/75/86UK67*
75UK62*
70UK69*
600 x 400
M8
4
LSW640B
• When transporting a large TV, there should be at least 2 people.
• When transporting the TV by hand, hold the TV as shown in the
following illustration.
• When transporting the TV, do not expose the TV to jolts or
excessive vibration.
• When transporting the TV, keep the TV upright, never turn the TV
on its side or tilt towards the left or right.
• Do not apply excessive pressure to cause flexing / bending of frame
chassis as it may damage screen.
• When handling the TV, be careful not to damage the protruding
buttons.
5
ENGLISH
• Avoid touching the screen at all times, as this may result in
damage to the screen.
• Do not move the TV by holding the cable holders, as the
cable holders may break, and injuries and damage to the
TV may occur.
• When attaching the stand to the TV set, place the screen
facing down on a cushioned table or flat surface to protect
the screen from scratches.
Mounting on the Table
1 Lift and tilt the TV into its upright position on a table. • Leave a 10 cm (minimum) space from the wall for proper
ventilation.
10 cm
10 cm
10 cm
10 cm
10 cm
(Depending on model)
2 Connect the power cord to a wall outlet.
• Do not apply foreign substances (oils, lubricants, etc.) to
the screw parts when assembling the product.
(Doing so may damage the product.)
• If you install the TV on a stand, you need to take actions
to prevent the product from overturning. Otherwise, the
product may fall over, which may cause injury.
• Do not use any unapproved items to ensure the safety and
product life span.
• Any damage or injuries caused by using unapproved items
are not covered by the warranty.
• Make sure that the screws are inserted correctly and
fastened securely. (If they are not fastened securely
enough, the TV may tilt forward after being installed.)
Do not use too much force and over tighten the screws;
otherwise screw may be damaged and not tighten
correctly.
6
Securing TV to the Wall
(Depending on model)
1 Insert and tighten the eye-bolts, or TV brackets and bolts on the back
of the TV.
• If there are bolts inserted at the eye-bolts position, remove the
bolts first.
2 Mount the wall brackets with the bolts to the wall.
Match the location of the wall bracket and the eye-bolts on the rear
of the TV.
3 Connect the eye-bolts and wall brackets tightly with a sturdy rope.
Make sure to keep the rope horizontal with the flat surface.
• Use a platform or cabinet that is strong and large enough to
support the TV securely.
• Brackets, bolts and ropes are not provided. You can obtain
additional accessories from your local dealer.
Mounting to the Wall
10 cm
10 cm
10 cm
10 cm
ENGLISH
Attach an optional wall mount bracket at the rear of the TV carefully
and install the wall mount bracket on a solid wall perpendicular to
the floor. When you attach the TV to other building materials, please
contact qualified personnel. LG recommends that wall mounting be
performed by a qualified professional installer. We recommend the use
of LG’s wall mount bracket. LG’s wall mount bracket is easy to move with
cables connected. When you do not use LG’s wall mount bracket, please
use a wall mount bracket where the device is adequately secured to the
wall with enough space to allow connectivity to external devices. It is
advised to connect all the cables before installing fixed wall mounts.
• Do not use a sharp object when you detached the cable
cover. This could damage the cable or the cabinet. It may
also cause personal harm. (Depending on model)
• When installing the wall mounting bracket, it is recommended to
cover the stand hole using tape, in order to prevent the influx of
dust and insects. (Depending on model)
10 cm
(Depending on model)
• Remove the stand before installing the TV on a wall
mount by performing the stand attachment in reverse.
• For more information of screws and wall mount bracket,
refer to the Separate purchase.
• If you intend to mount the product to a wall, attach VESA
standard mounting interface (optional parts) to the back
of the product. When you install the set to use the wall
mounting bracket (optional parts), fix it carefully so as
not to drop.
• When mounting a TV on the wall, make sure not to install
the TV by hanging the power and signal cables on the
back of the TV.
• Do not install this product on a wall if it could be exposed
to oil or oil mist. This may damage the product and cause
it to fall.
Stand hole
7
Connections
ENGLISH
Connect various external devices to the TV and switch input modes to
select an external device. For more information of external device’s
connection, refer to the manual provided with each device.
Antenna/Cable
Connect the TV to a wall antenna socket with an RF cable (75 Ω).
• Use a signal splitter to use more than 2 TVs.
• If the image quality is poor, install a signal amplifier properly to
improve the image quality.
• If the image quality is poor with an antenna connected, try to
realign the antenna in the correct direction.
• An antenna cable and converter are not supplied.
• For a location that is not supported with ULTRA HD broadcasting,
this TV cannot receive ULTRA HD broadcasts directly. (Depending
on model)
Satellite dish
Connect the TV to a satellite dish to a satellite socket with a satellite RF
cable (75 Ω). (Depending on model)
CI module
View the encrypted (pay) services in digital TV mode. (Depending on
model)
• Check if the CI module is inserted into the PCMCIA card slot in the
right direction. If the module is not inserted properly, this can
cause damage to the TV and the PCMCIA card slot.
• If the TV does not display any video and audio when CI+ CAM is
connected, please contact to the Terrestrial/Cable/Satellite Service
Operator.
8
Other connections
Connect your TV to external devices. For the best picture and audio
quality, connect the external device and the TV with the HDMI cable.
Some separate cable is not provided.
HDMI
• Supported HDMI Audio format :
(Depending on model)
DTS (44.1 kHz / 48 kHz / 88.2 kHz / 96 kHz),
DTS HD (44.1 kHz / 48 kHz / 88.2 kHz / 96 kHz / 176.4 kHz / 192
kHz),
True HD (48 kHz),
Dolby Digital / Dolby Digital Plus (32 kHz / 44.1 kHz / 48 kHz),
PCM (32 kHz / 44.1 kHz / 48 kHz / 96 kHz / 192 kHz)
(Only UHD models)
(
•
)
Picture
Additional Settings
-- On : Support 4K @ 50/60 Hz (4:4:4, 4:2:2, 4:2:0)
-- Off : Support 4K @ 50/60 Hz 8 bit (4:2:0)
If the device connected to Input Port also supports ULTRA HD Deep
Colour, your picture may be clearer. However, if the device doesn’t
support it, it may not work properly. In that case, change the TV’s
setting to off.
USB
Some USB Hubs may not work. If a USB device connected using a USB
Hub is not detected, connect it to the USB port on the TV directly.
External Devices
Available external devices are: Blu-ray player, HD receivers, DVD players,
VCRs, audio systems, USB storage devices, PC, gaming devices, and
other external devices.
To obtain the RS-232C external control setup information, please visit
www.lg.com. Download and read the manual. (Depending on model)
ENGLISH
• The external device connection may differ from the model.
• Connect external devices to the TV regardless of the order of the
TV port.
• If you record a TV program on a Blu-ray/DVD recorder or VCR, make
sure to connect the TV signal input cable to the TV through a DVD
recorder or VCR. For more information of recording, refer to the
manual provided with the connected device.
• Refer to the external equipment’s manual for operating
instructions.
• If you connect a gaming device to the TV, use the cable supplied
with the gaming device.
• In PC mode, there may be noise associated with the resolution,
vertical pattern, contrast or brightness. If noise is present, change
the PC output to another resolution, change the refresh rate to
another rate or adjust the brightness and contrast on the PICTURE
menu until the picture is clear.
• In PC mode, some resolution settings may not work properly
depending on the graphics card.
• If ULTRA HD content is played on your PC, video or audio may
become disrupted intermittently depending on your PC’s
performance. (Depending on model)
• When connecting via a wired LAN, it is recommended to use a CAT
port is provided.)
7 cable. (Only when
• For LK series, HDR (High Dynamic Range) pictures can be viewed
over the Internet or via USB and HDMI 1.4 compatible devices.
Remote RS-232C setup
• Do not drop the product or let it fall over when connecting
external devices. Otherwise, this may result in injury or
damage to the product.
• When connecting external devices such as video game
consoles, make sure the connecting cables are long
enough. Otherwise, the product may fall over, which may
cause injury or damage the product.
Using Button
You can simply operate the TV functions, using the button.
Basic functions
Power On (Press)
Power Off 1 (Press and Hold)
Menu Control (Press 2)
Menu Selection (Press and Hold 3)
1 All running apps will close, and any recording in progress will stop.
(Depending on country)
2 You can access and adjust the menu by pressing the button when
TV is on.
3 You can use the function when you access menu control.
Adjusting the menu
When the TV is turned on, press the button one time. You can adjust
the Menu items using the button.
Turns the power off.
Changes the input source.
Scrolls through the saved programmes.
Adjusts the volume level.
9
Using Remote Control
(Depending on model)
ENGLISH
The descriptions in this manual are based on the buttons on the remote
control. Please read this manual carefully and use the TV correctly.
To replace batteries, open the battery cover, replace batteries (1.5
V AAA) matching the and ends to the label inside the
compartment, and close the battery cover. To remove the batteries,
perform the installation actions in reverse.
Make sure to point the remote control toward the remote control sensor
on the TV.
1
2
1
(Some buttons and services may not be provided depending on models
or regions.)
10
* To use the button, press and hold for more than 3 seconds.
(POWER) Turns the TV on or off.
Selects Radio, TV and DTV programme.
(INPUT) Changes the input source.
(Q. Settings) Accesses the Quick Settings.
By zooming in on the selected area, you can view it in
full screen.
Recalls your preferred subtitle in digital mode.
Number buttons Enters numbers.
Accesses the saved programmes list.
Shows programme guide.
Returns to the previously viewed programme.
* You can access apps or Live TV using the number
buttons corresponding to the features.
Adjusts the volume level.
Views the information of the current programme and
screen.
(SEARCH) Search for content such as TV programmes, movies
and other videos, or perform a web search by entering text in the
search bar.
(MUTE) Mutes all sounds.
* (MUTE) Accesses the Accessibility menu.
Scrolls through the saved programmes.
Moves to the previous or next screen.
1 , 2 Streaming Service buttons Connects to the Video
Streaming Service.
(HOME) Accesses Home menu.
* (HOME) Shows the previous history.
Shows the list of Programmes and Recommended.
Returns to the previous level.
Clears on-screen displays and returns to TV viewing.
Navigation buttons (up/down/left/right) Scrolls through menus
or options.
Selects menus or options and confirms your input.
Teletext buttons (
) These buttons are used for
teletext.
,
Audio descriptions function will be enabled. (Depending
on model)
Starts to record and displays record menu. (Only Time
MachineReady supported model) (Depending on model)
Control buttons (
) Controls media contents.
,
,
,
These access special functions in some
menus.
Using Magic Remote Control
(Depending on model)
When the message “Magic Remote battery is low. Please change the
battery.” is displayed, replace the battery.
To replace batteries, open the battery cover, replace batteries (1.5 V AA)
matching the and ends to the label inside the compartment,
and close the battery cover. Be sure to point the magic remote toward
the remote control sensor on the TV. To remove the batteries, perform
the installation actions in reverse.
ENGLISH
The descriptions in this manual are based on the buttons on the remote
control. Please read this manual carefully and use the TV correctly.
(Screen Remote) Displays the Screen Remote.
-- Accesses the Universal Control Menu.
* Audio descriptions function will be enabled.
* You can access apps or Live TV using the number
buttons corresponding to the features.
Adjusts the volume level.
(MUTE) Mutes all sounds.
* (MUTE) Accesses the Accessibility menu.
Scrolls through the saved programmes.
* (Voice recognition)
Network connection is required to use the voice recognition function.
Once the voice display bar is activated on the TV screen, press and hold
the button and speak your command out loud.
(HOME) Accesses the Home menu.
* (HOME) Shows the previous history.
Displays the set-top box Home menu.
-- When you are not watching via a set-top box: the display changes
to the set-top box screen.
1
2
1
Wheel (OK) Press the center of the Wheel button to select a
menu. You can change programmes by using the wheel button.
(up/down/left/right) Press the up, down, left or right
button to scroll the menu. If you press
buttons while the
pointer is in use, the pointer will disappear from the screen and Magic
Remote will operate like a general remote control. To display the
pointer on the screen again, shake Magic Remote to the left and right.
Returns to the previous level.
* Clears on-screen displays and returns to last input viewing.
Shows programme guide.
1 , 2 Streaming Service buttons Connects to the Video
Streaming Service.
(INPUT) Changes the input source.
* (INPUT) Displays a list of all the external inputs.
(Q. Settings) Accesses the Quick Settings.
* (Q. Settings) Displays the All Settings menu.
,
,
,
These access special functions in some menus.
* (Red Button) Runs the record function.
Teletext buttons (
,
) These buttons are used for teletext.
By zooming in on the selected area, you can view it in
full screen.
* You can zoom in on the area where the remote control is
pointed.
(Some buttons and services may not be provided depending on models
or regions.)
* To use the button, press and hold for more than 3 seconds.
(POWER) Turns the TV on or off.
You can turn your set-top box on or off by adding the settop box to the universal remote control for your TV.
Number buttons Enters numbers.
Accesses the saved programmes list.
11
Registering Magic Remote Control
Troubleshooting
How to register the Magic Remote Control
ENGLISH
To use the Magic Remote, first pair it with your TV.
Cannot control the TV with the remote control.
1 P ut batteries into the Magic Remote and turn the TV on.
2 Point the Magic Remote at your TV and press the Wheel (OK) on
the remote control.
* If the TV fails to register the Magic Remote, try again after turning
the TV off and back on.
• Check the remote control sensor on the product and try again.
• Check if there is any obstacle between the product and the remote
control.
• Check if the batteries are still working and properly installed (
to , to ).
No image display and no sound is produced.
How to deregister the Magic Remote Control
Press the
and
(HOME) buttons at the same time, for five
seconds, to unpair the Magic Remote with your TV.
* P ressing and holding the
button will let you cancel and reregister Magic Remote at once.
• Do not mix new batteries with old batteries. This may
cause the batteries to overheat and leak.
• Failure to match the correct polarities of the battery
may cause the battery to burst or leak, resulting in fire,
personal injury, or ambient pollution.
• This apparatus uses batteries. In your community there
might be regulations that require you to dispose of these
batteries properly due to environmental considerations.
Please contact your local authorities for disposal or
recycling information.
• Batteries inside or inside the product shall not be exposed
to excessive heat such as sunshine, fire or the like.
12
• Check if the product is turned on.
• Check if the power cord is connected to a wall outlet.
• Check if there is a problem in the wall outlet by connecting other
products.
The TV turns off suddenly.
• Check the power control settings. The power supply may be
interrupted.
• Check if the auto-off function is activated on the settings related
time.
• If there is no signal while the TV is on, the TV will turn off
automatically after 15 minutes of inactivity.
When connecting to the PC (HDMI), no signal is detected.
• Turn the TV off/on using the remote control.
• Reconnect the HDMI cable.
• Restart the PC with the TV on.
Abnormal Display
• When cleaning the product, be careful not to allow any
liquid or foreign objects to enter the gap between the
upper, left or right side of the panel and the guide panel.
(Depending on model)
ENGLISH
• If the product feels cold to the touch, there may be a small “flicker”
when it is turned on. This is normal, there is nothing wrong with
product.
• This panel is an advanced product that contains millions of pixels.
You may see tiny black dots and/or brightly coloured dots (red, blue
or green) at a size of 1 ppm on the panel. This does not indicate a
malfunction and does not affect the performance and reliability
of the product.
This phenomenon also occurs in third-party products and is not
subject to exchange or refund.
• You may find different brightness and color of the panel depending
on your viewing position(left/right/top/down).
This phenomenon occurs due to the characteristic of the panel.
It is not related with the product performance, and it is not
malfunction.
• Displaying a still image for a prolonged period of time may cause
image sticking. Avoid displaying a fixed image on the TV screen for
a long period of time.
Generated Sound
• Make sure to wring any excess water or cleaner from the
cloth.
• Do not spray water or cleaner directly onto the TV screen.
• Make sure to spray just enough of water or cleaner onto a
dry cloth to wipe the screen.
• “Cracking” noise: A cracking noise that occurs when watching or
turning off the TV is generated by plastic thermal contraction due
to temperature and humidity. This noise is common for products
where thermal deformation is required.
• Electrical circuit humming/panel buzzing: A low level noise is
generated from a high-speed switching circuit, which supplies a
large amount of current to operate a product. It varies depending
on the product.
This generated sound does not affect the performance and
reliability of the product.
13
Specifications
(Depending on country)
ENGLISH
Broadcasting Specifications
Television system
DVB-S/S2
Channel coverage
(Band)
950 ~ 2150 MHz
Digital TV
Analogue TV
DVB-S/S21
DVB-C
DVB-T
DVB-T21
PAL/SECAM B/G, D/K, I
SECAM L
DVB-C
46 ~ 890 MHz
DVB-T/T2
VHF III : 174 ~ 230 MHz
UHF IV : 470 ~ 606 MHz
UHF V : 606 ~ 862 MHz
46 ~ 862 MHz
S Band II : 230 ~ 300 MHz
S Band III : 300 ~ 470 MHz
Maximum number of
storable programmes
6,000
3,000
External antenna
impedance
75 Ω
CI Module (W x H x D)
100.0 mm x 55.0 mm x 5.0 mm
1 Depending on country
(Only LK59*, LK60*, LK61*A, 32LK615*)
Wireless module(LGSWFAC71)Specifications
Wireless LAN (IEEE 802.11a/b/g/n/ac)
Frequency Range
Output Power (Max.)
2400 to 2483.5 MHz
5150 to 5725 MHz
5725 to 5850 MHz (Not for EU)
13 dBm
16.5 dBm
10 dBm
As band channels can vary per country, the user cannot change or adjust the operating frequency. This product is configured for the regional
frequency table.
For consideration of the user, this device should be installed and operated with a minimum distance of 20 cm between the device and the body.
“IEEE 802.11ac” is not available in all countries.
14
(Except for LK59*, LK60*, LK61*A, 32LK615*)
Wireless module (LGSBWAC72) specifications
Wireless LAN (IEEE 802.11a/b/g/n/ac)
Output Power (Max.)
14 dBm
16.5 dBm
11.5 dBm
ENGLISH
Frequency Range
2400 to 2483.5 MHz
5150 to 5725 MHz
5725 to 5850 MHz (Not for EU)
Bluetooth
Frequency Range
2400 to 2483.5 MHz
Output Power (Max.)
8.5 dBm
As band channels can vary per country, the user cannot change or adjust the operating frequency. This product is configured for the regional
frequency table.
For consideration of the user, this device should be installed and operated with a minimum distance of 20 cm between the device and the body.
“IEEE 802.11ac” is not available in all countries.
Environment condition
Operating Temperature
0 °C to 40 °C
Operating Humidity
Less than 80 %
Storage Temperature
-20 °C to 60 °C
Storage Humidity
Less than 85 %
15
Open Source Software
Notice Information
ENGLISH
To obtain the source code under GPL, LGPL, MPL, and other open
source licenses, that is contained in this product, please visit http://
opensource.lge.com.
In addition to the source code, all referred license terms, warranty
disclaimers and copyright notices are available for download.
LG Electronics will also provide open source code to you on CD-ROM
for a charge covering the cost of performing such distribution (such
as the cost of media, shipping, and handling) upon email request to
opensource@lge.com.
This offer is valid for a period of three years after our last shipment of
this product. This offer is valid to anyone in receipt of this information.
Licenses
Supported licenses may differ by model.
16
Record the model number and serial number of the TV.
Refer to the label on the back cover and quote this
information to your dealer when requiring any service.
Model
Serial No.
SMART TV Quick Setup Guide
* Image shown may differ from your TV.
* Image shown on a PC or mobile phone may vary depending on the OS(Operating System).
* App icon positions may vary on the platform, depending on the software version.
Network Settings
1 Press the (Home) button on the remote to
access the Home menu. Point the (Settings)
icon and select by pressing the Wheel (OK)
button on the remote.
Picture
Sound
Programmes
Network
General
Safety
Accessibility
WI-FI CONNECTION
Network /
ꔐ WI-FI : AAA
WI-FI : BBB
WI-FI : CCC
WI-FI : DDD
WI-FI : EEE
Add a Hidden Wireless Network
Connect via WPS PBC
Connect via WPS PIN
Advanced Wi-Fi Settings
For wireless AP (Router) that have the
symbol, you need to enter the security key.
2 Point the ( ) (All Settings) icon and select
by pressing the Wheel (OK) button on the
remote.
5 If the connection is successful, the "Connected
to Internet" is displayed.
Picture
Sound
Programmes
NETWORK
TV Name
[LG] WebOS TV
Wired Connection (Ethernet)
Not Connected
Wi-Fi Connection
All Settings
(
3 Select the Network → Wired Connection
(Ethernet) or Wi-Fi Connection.
Picture
Sound
Programmes
Network
General
NETWORK
)
Network
General
Connected to Internet
Wi-Fi Direct
LG Connect Apps
Safety
Accessibility
You can check the status of connection in
Advanced Wi-Fi settings.
TV Name
[LG] WebOS TV
Wired Connection (Ethernet)
Not Connected
Wi-Fi Connection
Picture
Wi-Fi Direct
LG Connect Apps
Sound
Not Connected
Programmes
Safety
Network
Accessibility
General
4 The device automatically tries to connect to the
network available (wired network first).
When you select the Wi-Fi Connection, the
network list available is displayed. Choose the
network you wish to use.
Safety
Accessibility
WI-FI CONNECTION
Network /
ꔐ WI-FI : AAA
WI-FI : BBB
WI-FI : CCC
WI-FI : DDD
WI-FI : EEE
Add a Hidden Wireless Network
Connect via WPS PBC
Connect via WPS PIN
Advanced Wi-Fi Settings
www.lg.com
Troubleshooting Network Problems
1 Press the (Home) button on the remote to
access the Home menu. Point the (Settings)
icon and select by pressing the Wheel (OK)
button on the remote.
Check the AP (Router) or consult your Internet
service provider.
When X appears next to Gateway:
1 Unplug the power cord of the AP (Router) and
try to connect after 5 seconds.
2 Initialize (Reset) the AP (Router).
2 Point the ( ) (All Settings) icon and select
by pressing the Wheel (OK) button on the
remote.
(
All Settings
3 Contact internet service provider or AP (Router)
company.
)
3 Select the Network → Wired Connection
(Ethernet) or Wi-Fi Connection → Advanced
Wi-Fi Settings.
Picture
Sound
Programmes
NETWORK
General
Sound
TV Name
[LG] WebOS TV
Wired Connection (Ethernet)
Not Connected
Wi-Fi Connection
Network
Picture
Not Connected
Wi-Fi Direct
LG Connect Apps

Programmes
Network
General
Safety
Safety
Accessibility
Accessibility
WI-FI CONNECTION
Network /
ꔐ WI-FI : AAA
WI-FI : BBB
WI-FI : CCC
WI-FI : DDD
WI-FI : EEE
Add a Hidden Wireless Network
Connect via WPS PBC
Connect via WPS PIN
Advanced Wi-Fi Settings
Follow the instructions below that correlate to your
network status.
Check the TV or the AP (Router).
When X appears next to TV:
1 Check the connection status of the TV, AP
(Router).
2 Power off and power on the TV, AP (Router).
3 If you are using a static IP, enter the IP directly.
4 Contact internet service provider or AP (Router)
company.
When X appears next to DNS:
1 Unplug the power cord of the AP (Router) and
try to connect after 5 seconds.
2 Initialize (Reset) the AP (Router).
3 Check that the MAC address of the TV/AP (Router)
is registered with your Internet service provider.
(The MAC address displayed on the right
pane of the network status window should be
registered with your Internet service provider.)
4 Check the AP (Router) manufacturer’s website
to make sure your router has the latest firmware
version installed.
SmartShare PC SW Installing & Setting
1 Install the SmartShare PC SW programme on your PC.
2 Go to www.lg.com. Then, select your region.
3 Select SUPPORT. Then, select Drivers & Software, SOFTWARE UPDATE or Software & Firmware.
4 Search for your model. Then, select SmartShare PC SW.
5 You can run the programme when installation is complete.
NOTE
yy SmartShare service is only available if TV and other devices are connected via a single AP (Router).
SmartShare Connection to Smartphone
1 Check that Wi-Fi is enabled on your smartphone. To use SmartShare, both devices must
on the same local network.
2 Install/run the app for sharing content on your smartphone (It's called LG TV Plus on LG
phones).
3 Enable your smartphone to share content files with other devices.
4 Open Device Connector application.
(Home) → Device Connector → Smartphone → CONTENT SHARE.
5 Select the file type you want to play (movie, audio or photo).
6 Select a movie, music or photo file to play on the TV.
7 Play the media file to view and enjoy it on your TV.
Updating the TV Firmware
* If the TV is turned on for the first time after it was shipped from the factory, initialization of the TV may
take a few minutes.
1
(Home) → (Settings) →
CHECK FOR UPDATES
(
) (All Settings) →
General → About This TV →
2 After checking the version of the software, update it.
If you check the "Allow Automatic Updates", you can update the software automatically.
Picture
Sound
Programmes
Network
General
Safety
GENERAL
Eco Mode
Mobile TV On
SIMPLINK (HDMI-CEC)
LG Wireless Keyboard
Settings Help
No Signal Image
Reset to Initial Settings
Picture

Sound
Programmes
Network
User Agreements
General /
Software Version
ꔐ
xx.xx.xx
Allow Automatic Updates
CHECK FOR UPDATES
TV Information
General
Safety
About This TV
Accessibility
ABOUT THIS TV
[LG] webOS TV
User Guide
Open Source Software Notice
Set ID : 1
Accessibility
Wi-Fi Direct Setting
Picture
Sound
Programmes
Network
General
Safety
Accessibility
WI-FI Direct
Network /
ꔐ WI-FI : AAA
WI-FI : BBB
WI-FI : CCC
WI-FI : DDD
WI-FI : EEE
REFRESH LIST
(Home) → (Settings) → ( ) (All Settings) →
Network → Wi-Fi Direct
If a local network is not available, you can connect a portable device directly to the
TV using Wi-Fi Direct.
With SmartShare, you can share files or screens of devices connected to Wi-Fi
Direct.
1 When you open Wi-Fi Direct menu, a list of available devices appears.
2 When you are prompted to request connection, select Yes. Wi-Fi Direct is now
connected to your TV.
Miracast Setting
Miracast allows a portable device to securely send video and sound to the TV wirelessly.
1 Miracast should be set to "ON" on your portable device.
2 When your TV is detected, select the device on your portable device.
When connection is completed, the device screen appears on the TV screen.
Please call LG Customer Service if you experience any problems.
Краткое руководство по настройке SMART TV
* Приведенное изображение может отличаться от Вашего телевизора.
* Изображение, отображаемое на компьютере или мобильном телефоне, может отличаться в
зависимости от ОС (Операционной системы).
* Расположение значков приложений может отличаться в зависимости от платформы и версии
программного обеспечения (ПО).
НАСТРОЙКА СЕТИ
1 Для отображения меню Home нажмите кнопку
(Home) на пульте ДУ. Выделите значок
(Настройки) и выберите его, нажав кнопку
Колесико(OK) на пульте ДУ.
Экран
Подключение к сети Wi-Fi
Сеть /
Звук
ꔐ
Каналы
Сеть
Общие
Безопасность
Доступность
Для беспроводных точек доступа
(маршрутизаторов) со значком
необходимо
ввести ключ защиты.
5 Если подключение выполнено успешно,
отображается состояние "Подключено к
Интернету".
2 Выделите значок ( ) (Все настройки) и
выберите его, нажав кнопку Колесико (OK)
на пульте ДУ.
Экран
Звук
Все настройки
(
)
3 Перейдите в Сеть → Проводное
подключение (Ethernet) или Подключение к
сети Wi-Fi.
Экран
Звук
Каналы
Сеть
Каналы
Сеть
Имя телевизора
Проводное подключение (Ethernet)
Нет соединения
Подключение к сети Wi-Fi
Сеть
Подключено к Интернету
Wi-Fi Direct
Общие
Безопасность
Доступность
Состояние подключения можно проверить в
разделе Дополнительные настройки Wi-Fi.
Имя телевизора
Проводное подключение (Ethernet)
Нет соединения
Подключение к сети Wi-Fi
Сеть
Настроить скрытую Wi-Fi сеть
Подключение с помощью WPS-PBC
Подключение с помощью WPS-PIN
Дополнительные настройки Wi-Fi
Нет соединения
Wi-Fi Direct
Экран
Общие
Звук
Безопасность
Каналы
Доступность
4 Устройство автоматически пытается
подключиться к доступной сети (проводное
подключение приоритетно).
При выборе пункта Подключение к сети Wi-Fi
отображается список доступных сетей. Выберите
необходимую сеть.
Подключение к сети Wi-Fi
Сеть /
ꔐ
Сеть
Общие
Безопасность
Настроить скрытую Wi-Fi сеть
Подключение с помощью WPS-PBC
Подключение с помощью WPS-PIN
Дополнительные настройки Wi-Fi
Доступность
www.lg.com
Устранение неполадок в сети
1 Для отображения меню Home нажмите кнопку
(Home) на пульте ДУ. Выделите значок
(Настройки) и выберите его, нажав кнопку
Колесико(OK) на пульте ДУ.
Проверьте маршрутизатор или проконсультируйтесь с
провайдером интернет-услуг.
Если символ "X" отображается рядом со
значком шлюза:
1 Отсоедините кабель питания точки доступа
(маршрутизатора) и попытайтесь выполнить
подключение через 5 секунд.
2 Выполните инициализацию (сброс) точки доступа
(маршрутизатора).
3 Свяжитесь с интернет-провайдером или
компанией-производителем точки доступа
(маршрутизатора).
2 Выделите значок ( ) (Все настройки) и
выберите его, нажав кнопку Колесико (OK)
на пульте ДУ.
(
Все настройки
)
3 Перейдите в Сеть → Проводное
подключение (Ethernet) или Подключение
к сети Wi-Fi → Дополнительные настройки
Wi-Fi.
Экран
Сеть
Экран
Звук
Имя телевизора
Звук
Каналы
Проводное подключение (Ethernet)
Нет соединения
Подключение к сети Wi-Fi
Сеть
Нет соединения
Wi-Fi Direct

Подключение к сети Wi-Fi
Сеть /
ꔐ
Каналы
Сеть
Общие
Общие
Безопасность
Безопасность
Доступность
Доступность
Настроить скрытую Wi-Fi сеть
Подключение с помощью WPS-PBC
Подключение с помощью WPS-PIN
Дополнительные настройки Wi-Fi
Следуйте приведенным ниже инструкциям,
относящимся к состоянию Вашей сети.
Проверьте телевизор и точку доступа (маршрутизатор).
Если символ "X" отображается рядом со
значком телевизора:
1 Проверьте статус подключения телевизора и
точки доступа (маршрутизатора).
2 Включите и выключите телевизор, точку доступа
(маршрутизатор).
3 При использовании статического IP введите IP
напрямую.
4 Свяжитесь с интернет-провайдером или
компанией-производителем точки доступа
(маршрутизатора).
Если символ "X" отображается рядом со
значком DNS:
1 Отсоедините кабель питания точки доступа
(маршрутизатора) и попытайтесь выполнить
подключение через 5 секунд.
2 Выполните инициализацию (сброс) точки доступа
(маршрутизатора).
3 Убедитесь, что MAC-адрес телевизора/
маршрутизатора зарегистрирован у Вашего
поставщика интернет-услуг. (MAC-адрес,
отображаемый на правой панели окна состояния
сети, должен быть зарегистрирован у Вашего
поставщика интернет-услуг.)
4 На сайте производителя маршрутизатора
убедитесь, что на Вашем устройстве
установлена последняя версия встроенного ПО.
Установка и настройка SmartShare PC SW
1 Установите программу SmartShare PC SW на компьютер.
. Затем выберите свой регион.
2 Зайдите на веб-сайт
3 Выберите Поддержка. Затем Выберите Драйверы, прошивки и ПО.
4 Найдите свою модель. Затем выберите SmartShare PC SW (ПО на ПК для Smartshare).
5 После завершения установки можно запустить программу.
ПРИМЕЧАНИЕ
yy Сервис SmartShare доступен только, если телевизор и другие устройства подключены к
единому маршрутизатору.
Подключение SmartShare для смартфона
1 Убедитесь, что на смартфоне активна связь Wi-Fi. Чтобы воспользоваться функцией
SmartShare, необходимо, чтобы оба устройства были подключены к одной локальной
сети.
2 Установите/запустите приложение для отправки содержимого со смартфона (на
телефонах LG оно называется LG TV Plus ).
3 Включите смартфон для отправки файлов содержимого на другие устройства.
4 Откройте приложение Менеджер подключений.
(главный экран) → Менеджер подключений → Смартфон → ОБЩИЙ ДОСТУП
К КОНТЕНТУ.
5 Выберите типы файлов, которые Вы хотите воспроизвести (видео, аудио или фото).
6 Выберите файл видео, аудио или фото для воспроизведения на экране телевизора.
7 Воспроизведите медиа-файл, чтобы просмотреть его содержимое на экране телевизора.
Обновление ПО телевизора
* При первом включении нового телевизора, после приобретения, инициализация телевизора
может занять несколько минут.
(главный экран) → (Настройки) → ( ) (Все настройки) →
Общие → Сведения о
телевизоре → Проверить обновления
2 Здесь можно проверить версию ПО и выполнить обновление.
Если установить флажок "Разрешить автоматические обновления", обновление программного
обеспечения будет производиться автоматически.
1
Экран
Общие
Экран
Звук
Режим ЭКО
Звук
Каналы
Сеть
Общие
Безопасность
Доступность
Управление ТВ смартфоном
Беспроводная клавиатура LG
Справка по настройкам
Изображение отсутствия сигнала
Сброс настроек до заводских
Сведения о телевизоре
Соглашения с пользователем

Каналы
Сеть
Общие
Безопасность
Доступность
Сведения о телевизоре
Общие /
Версия ПО
ꔐ
xx.xx.xx
Разрешить автоматические обновления
Проверить обновления
Информация о телевизоре
Рук-во пользователя
Примечание касательно ПО с открытым исходным кодом
Задать идентификатор : 1
Установка Wi-Fi Direct
Wi-Fi Direct
Экран
Сеть /
Звук
ꔐ
Каналы
Сеть
Общие
Безопасность
Доступность
ОБНОВИТЬ СПИСОК
(главный экран) →
(Настройки) → ( ) (Все настройки) →
Сеть → Wi-Fi Direct
Если локальная сеть недоступна, портативное устройство можно
подключить напрямую к телевизору с помощью функции Wi-Fi Direct.
С помощью
можно предоставлять общий доступ к файлам
или экранам устройств, подключенных к Wi-Fi Direct.
1 При открытии меню Wi-Fi Direct появляется список доступных устройств.
2 При появлении запроса на подключение выберите ДА. Теперь Wi-Fi Direct
подключена к телевизору.
Настройка Miracast
Miracast позволяет осуществлять безопасную беспроводную отправку видео и
аудио с переносного устройства на телевизор.
1 Функция Miracast должна быть "Вкл." на мобильном устройстве.
2 После обнаружения телевизора выберите устройство на портативном устройстве.
После успешно установленного подключения экран устройства отобразится на экране
телевизора.
При возникновении любых проблем звоните в центр поддержки клиентов LG.
Короткий довідник із налаштування SMART TV
* Подані в цьому документі зображення можуть відрізнятися від дійсного оригіналу вашого телевізора.
* Подані в цьому документі зображення на комп'ютері або мобільному телефоні можуть відрізнятися
залежно від операційної системи.
* Положення піктограм програм на платформі може різнитися залежно від версії програмного забезпечення.
НАЛАШТУВАННЯ МЕРЕЖІ
1 Натисніть кнопку (ДІМ) на пульті дистанційного
керування, щоб отримати доступ до меню ДІМ.
Наведіть фокус на піктограму (Налаштування) і
виберіть, натиснувши кнопку
Коліщатко (OK) на
пульті дистанційного керування.
З’єднання з мережею Wi-Fi
Зображення Мережа /
Звук
ꔐ
Канали
Мережа
Загальні
Безпека
Доступність
Додати приховану безпровідну мережу
Підключення через WPS-PBC
Підключення за допомогою PIN-коду WPS
Додаткові налаштування Wi-Fi
Для підключення до бездротових точок доступу
(маршрутизаторів), позначених символом
,
потрібно ввести ключ захисту.
5 Коли з’єднання встановлено, відображається
повідомлення "Підключено до Інтернету".
2 Наведіть фокус на піктограму
( ) (Усі
налаштування) і виберіть, натиснувши кнопку
Коліщатко (OK) на пульті дистанційного керування.
Зображення
Мережа
Звук
Ім’я телевізора
Канали
Не підключено
Проводове підключення (Ethernet)
З’єднання з мережею Wi-Fi
Усі налаштування
(
)
3 Виберіть у меню пункт Мережа → Проводове
підключення (Ethernet) або З’єднання з мережею
Wi-Fi.
Зображення
Мережа
Звук
Ім’я телевізора
Канали
Не підключено
Проводове підключення (Ethernet)
З’єднання з мережею Wi-Fi
Мережа
Не підключено
Wi-Fi Direct
Загальні
Мережа
Wi-Fi Direct
Загальні
Безпека
Доступність
Стан з’єднання можна перевірити в меню Додаткові
налаштування Wi-Fi.
З’єднання з мережею Wi-Fi
Зображення Мережа /
Звук
ꔐ
Канали
Безпека
Мережа
Доступність
Загальні
4 Пристрій намагатиметься автоматично підключитися
до наявних мереж (насамперед до кабельних).
Якщо вибрати пункт З’єднання з мережею Wi-Fi,
буде відображено список доступних мереж. Виберіть
мережу, до якої ви бажаєте підключитися.
Підключено до Інтернету
Безпека
Додати приховану безпровідну мережу
Підключення через WPS-PBC
Підключення за допомогою PIN-коду WPS
Додаткові налаштування Wi-Fi
Доступність
www.lg.com
Усунення проблем із підключенням до мережі
1 Натисніть кнопку (ДІМ) на пульті дистанційного
керування, щоб отримати доступ до меню ДІМ.
Наведіть фокус на піктограму (Налаштування) і
виберіть, натиснувши кнопку Коліщатко (OK) на
пульті дистанційного керування.
Перевірте маршрутизатор або зверніться до
постачальника Інтернет-послуг.
Якщо позначка "X" стоїть одразу після піктограми
шлюзу:
1 Від’єднайте кабель живлення точки доступу
(маршрутизатора) і під’єднайте через 5 секунд.
2 Ініціалізуйте (скиньте налаштування) точку
доступу (маршрутизатор).
3 Зверніться до постачальника послуг Інтернету
або виробника точки доступу (маршрутизатора).
2 Наведіть фокус на піктограму ( ) (Усі
налаштування) і виберіть, натиснувши кнопку
Коліщатко (OK) на пульті дистанційного керування.
(
Усі налаштування
)
3 Виберіть у меню пункт Мережа → Проводове
підключення (Ethernet) або З’єднання з мережею
Wi-Fi → Додаткові налаштування Wi-Fi.
Зображення
Звук
Канали
Мережа
Звук
Ім’я телевізора
Проводове підключення (Ethernet)
Не підключено
З’єднання з мережею Wi-Fi
Мережа
З’єднання з мережею Wi-Fi
Зображення Мережа /
Не підключено
Wi-Fi Direct

ꔐ
Канали
Мережа
Загальні
Загальні
Безпека
Безпека
Доступність
Доступність
Додати приховану безпровідну мережу
Підключення через WPS-PBC
Підключення за допомогою PIN-коду WPS
Додаткові налаштування Wi-Fi
Виконайте вказівки нижче для відповідного стану
мережі.
Перевірте телевізор або точку доступу
(маршрутизатор).
Якщо позначка "X" стоїть одразу після піктограми
телевізора:
1 Перевірте стан під’єднання телевізора до точки
доступу (маршрутизатора).
2 Вимкніть і увімкніть телевізор, точку доступу
(маршрутизатора).
3 У разі використання статичної IP-адреси введіть
IP-адресу безпосередньо.
4 Зверніться до постачальника послуг Інтернету
або виробника точки доступу (маршрутизатора).
Якщо позначка "X" стоїть одразу після піктограми
DNS:
1 Від’єднайте кабель живлення точки доступу
(маршрутизатора) і під’єднайте через 5 секунд.
2 Ініціалізуйте (скиньте налаштування) точку
доступу (маршрутизатор).
3 Перевірте, чи MAC-адресу телевізора/
маршрутизатора зареєстровано в
постачальника Інтернет-послуги. (MACадресу, що відображається у правій частині
вікна стану мережі, має бути зареєстровано в
постачальника Інтернет-послуг).
4 Відвідайте веб-сайт виробника маршрутизатора,
щоб перевірити, чи маршрутизатор
використовує останню версію програмного
забезпечення.
Встановлення і налаштування комп'ютерної програми SmartShare
1
2
3
4
5
Встановіть на комп'ютері програму SmartShare PC SW.
Зайдіть на веб-сайт
. Потім виберіть свій регіон.
Виберіть пункт ПІДТРИМКА. Потім Виберіть пункт Прошивки та драйвера.
Знайдіть модель свого виробу. Потім виберіть пункт SmartShare PC SW.
Програму можна запустити після встановлення.
ПРИМІТКА
yy Послуга SmartShare доступна лише, якщо телевізор та інші пристрої з'єднано за
допомогою одного маршрутизатора.
З'єднання зі смартфоном за допомогою SmartShare
1 Перевірте, чи на смартфоні увімкнено модуль Wi-Fi. Для використання SmartShare обидва
пристрої мають бути підключені до одної мережі.
2 Встановіть/запустіть програму для надання доступу до вмісту на смартфоні (на телефонах LG
це програма LG TV Plus ).
3 Увімкніть на смартфоні можливість надання доступу до файлів іншим пристроям.
4 Відкрийте програму Підключення пристроїв.
(ДІМ) → Підключення пристроїв → Смартфон → ДІЛИТИСЬ КОНТЕНТОМ.
5 Виберіть тип файлу для відтворення (фільм, музика або фотографія).
6 Виберіть фільм, музику або фотографію для відтворення на телевізорі.
7 Почніть відтворення мультимедійного файлу для перегляду або прослуховування за допомогою
телевізора.
Оновлення програмного забезпечення телевізора
* Якщо вперше ввімкнути телевізор після доставки із заводу, ініціалізація може тривати кілька хвилин.
(ДІМ) → (Налаштування) → ( ) (Усі налаштування) →
Загальні → Відомості про телевізор →
Перевірити оновлення
2 У цьому меню можна перевірити версію програмного забезпечення та виконати оновлення.
Якщо ввімкнути «Дозволити режим автоматичного оновлення», ПЗ оновлюватиметься автоматично.
1
Зображення
Звук
Канали
Мережа
Загальні
Безпека
Доступність
Загальні
Еко-режим
Функцію мобільного телебачення ввімкнуто
Безпровідна клавіатура LG
Довідка з настроювання
Зображення відсутності сигналу
Виконати скидання налаштувань до початкових
Відомості про телевізор
Угоди з користувачем
Зображення

Звук
Канали
Мережа
Загальні
Безпека
Доступність
Відомості про телевізор
Загальні /
Версія ПЗ
ꔐ
xx.xx.xx
Дозволити режим автоматичного оновлення
Перевірити оновлення
Інформація про телевізор
Посібник користувача
Зауваження щодо ПЗ із відкритим вихідним кодом
Задати ідентифікатор : 1
Налаштування функції "Wi-Fi Direct"
Wi-Fi Direct
Зображення Мережа /
Звук
Канали
Мережа
Загальні
Безпека
Доступність
ꔐ
ОНОВИТИ СПИСОК
(головний екран) →
(Налаштування) → ( ) (Усі налаштування) →
Мережа → Wi-Fi Direct
Якщо локальна мережа відсутня, можна підключити портативний пристрій
безпосередньо до телевізора через інтерфейс Wi-Fi Direct.
Завдяки програмі
можна надавати доступ до файлів або екранів
пристроїв, підключених до Wi-Fi Direct.
1 Якщо відкрити меню Wi-Fi Direct, з’явиться список доступних пристроїв.
2 Після появи повідомлення про подання запиту щодо підключення натисніть кнопку
ТАК. Тепер Wi-Fi Direct підключено до телевізора.
Налаштування Miracast
Функція Miracast дає змогу портативному пристрою безпечно надсилати відео- й аудіосигнали
телевізору в бездротовий спосіб.
1 На портативному пристрої слід вибрати "Ввімк." для функції Miracast.
2 Коли телевізор буде знайдено, виберіть його в переліку пристроїв на портативному пристрої.
Коли з’єднання буде встановлено, на екрані телевізора з’явиться екран пристрою.
Якщо у вас виникають проблеми, зателефонуйте в центр обслуговування клієнтів компанії LG.
SMART TV қысқаша орнату нұсқаулығы
* Көрсетілген бейне теледидарда көрсетілгеннен өзгеше болуы мүмкін.
* Компьютерде немесе ұялы телефонда көрсетілген бейне амалдық жүйеге байланысты
өзгеше болуы мүмкін.
* Бағдарламалық құрал нұсқасына байланысты платформадағы қолданба белгішесінің
орындары өзгеруі мүмкін.
Желі Параметрі
1 Бастапқы мәзіріне кіру үшін қашықтан басқару
(Бастапқы) түймесін басыңыз.
құралындағы
(Параметрлер) белгішесін бөлектеңіз және
қашықтан басқару құралындағы дөңгелекті
(ОК) түймесін басу арқылы таңдаңыз.
Wi-Fi байланысы
Сурет Желі /
Дыбыс
ꔐ
Арналар
Желі
Жалпы
Жасырын сымсыз желіні қосыңыз
WPS PBC арқылы қосылу
WPS PIN арқылы қосылу
Қауіпсіздік
Қосымша Wi-Fi параметрлері
Арн. мүмк-р
2
( ) (Барлық параметрлер) белгішесін
бөлектеңіз және қашықтан басқару құралындағы
дөңгелекті (ОК) түймесін басу арқылы
таңдаңыз.
Таңбасы бар сымсыз AP (Маршрутизатор)
үшін қауіпсіздік кілтін енгізуіңіз керек.
5 Қосылым аяқталса, "Интернетке қосылған"
хабары көрсетіледі.
Сурет
Желі
Дыбыс
Теледидар атауы
Сымды қосылым (Ethernet)
Арналар
Қосылмаған
Wi-Fi байланысы
Интернетке қосылған
Желі
Wi-Fi Direct
Жалпы
Барлық параметрлер
(
)
3 Желі → Сымды қосылым (Ethernet) немесе
Wi-Fi байланысы тармағын таңдаңыз.
Сурет
Желі
Дыбыс
Теледидар атауы
Арналар
Қосылым күйін Қосымша Wi-Fi параметрлері
терезесінен тексере аласыз.
Сурет
Сымды қосылым (Ethernet)
Қосылмаған
Wi-Fi байланысы
Желі
Қауіпсіздік
Арн. мүмк-р
Дыбыс
Wi-Fi байланысы
Желі /
ꔐ
Арналар
Қосылмаған
Wi-Fi Direct
Жалпы
Қауіпсіздік
Арн. мүмк-р
Желі
Жалпы
Қауіпсіздік
Жасырын сымсыз желіні қосыңыз
WPS PBC арқылы қосылу
WPS PIN арқылы қосылу
Қосымша Wi-Fi параметрлері
Арн. мүмк-р
4 Құрылғы қол жетімді желіге (бірінші сымды желі)
қосылуға автоматты түрде әрекет етеді.
Wi-Fi байланысы тармағы таңдалғанда,
қол жетімді желілер тізімі көрсетіледі.
Пайдаланғыңыз келетін желіні таңдаңыз.
www.lg.com
Желі ақауларын жою
1 Бастапқы мәзіріне кіру үшін қашықтан басқару
(Бастапқы) түймесін басыңыз.
құралындағы
(Параметрлер) белгішесін бөлектеңіз және
қашықтан басқару құралындағы дөңгелекті
(ОК) түймесін басу арқылы таңдаңыз.
2
Маршрутизаторды тексеріңіз немесе Интернет
қызметінің провайдерінен көмек алыңыз.
( ) (Барлық параметрлер) белгішесін
бөлектеңіз және қашықтан басқару құралындағы
дөңгелекті (ОК) түймесін басу арқылы
таңдаңыз.
(
Барлық параметрлер
3 Желі → Сымды қосылым (Ethernet)
немесе Wi-Fi байланысы → Қосымша Wi-Fi
параметрлері тармағын таңдаңыз.
Сурет
Желі
Сурет
Дыбыс
Теледидар атауы
Дыбыс
Арналар
Сымды қосылым (Ethernet)
Қосылмаған
Wi-Fi байланысы
Желі
Жалпы
Қосылмаған
Wi-Fi Direct

)
Wi-Fi байланысы
Желі /
ꔐ
Арналар
Желі
Жалпы
Қауіпсіздік
Қауіпсіздік
Арн. мүмк-р
Арн. мүмк-р
Жасырын сымсыз желіні қосыңыз
WPS PBC арқылы қосылу
WPS PIN арқылы қосылу
Қосымша Wi-Fi параметрлері
Желіңіздің күйіне қатысты төмендегі нұсқауларды
орындаңыз.
Теледидарды немесе AP (Маршрутизатор)
құрылғысын тексеріңіз.
Теледидар жанында X пайда болғанда:
1 Теледидардың, кіріс нүктесінің (Маршрутизатор)
қосылым күйін тексеріңіз.
1 Теледидарды, кіріс нүктесін (Маршрутизатор)
өшіріңіз және қосыңыз.
2 Тұрақты IP мекенжайын пайдалансаңыз, IP
мекенжайын тікелей енгізіңіз.
3 Интернет қызметі провайдеріне немесе
AP (Маршрутизатор) компанияларына
хабарласыңыз.
Қақпа жанында X пайда болғанда:
1 Кіріс нүктесінің (Маршрутизатор) қуат сымын
ажыратыңыз және 5 секундтан кейін қосып
көріңіз.
2 Кіріс нүктесін (Маршрутизатор) баптандырыңыз
(Қайта орнату).
3 Интернет қызметі провайдеріне немесе
AP (Маршрутизатор) компанияларына
хабарласыңыз.
DNS жанында X пайда болғанда:
1 Кіріс нүктесінің (Маршрутизатор) қуат сымын
ажыратыңыз және 5 секундтан кейін қосып
көріңіз.
2 Кіріс нүктесін (Маршрутизатор) баптандырыңыз
(Қайта орнату).
3 Теледидардың/маршрутизатордың MAC
мекенжайы Интернет қызметінің провайдерінде
тіркеулі екенін тексеріңіз. (Желі күйі терезесінің
оң жақ тақтасында көрсетілген MAC мекенжайы
Интернет қызметінің провайдерінде тіркеулі
болуы керек.)
4 Маршрутизатор өндірушісінің торабынан
маршрутизаторда ең соңғы аппараттықбағдарламалық құрал нұсқасы орнатылғанын
тексеріңіз.
SmartShare PC SW Орнату және реттеу
1
2
3
4
5
Компьютеріңізге SmartShare PC SW бағдарламасын орнатыңыз.
веб-торабына өтіңіз. Одан кейін аймағыңызды таңдаңыз.
ПОДДЕРЖКА опциясын таңдаңыз. Одан кейін, ПО и программы опциясын таңдаңыз.
Үлгіңізді іздеңіз. Содан кейін SmartShare PC SW опциясын таңдаңыз.
Орнату аяқталғанда бағдарламаны іске қосуға болады.
ЕСКЕРТПЕ
yy SmartShare қызметін теледидар мен басқа құрылғылар бір маршрутизатор арқылы
қосылған жағдайда ғана пайдалануға болады.
Смартфонға SmartShare қосылымы
1 Смартфонда Wi-Fi мүмкіндігінің қосылғанын тексеріңіз. SmartShare қолданбасын
пайдалану үшін екі құрылғы да бір жергілікті желіде болуы тиіс.
2 Смартфонда мазмұнды бөлісуге арналған қолданбаны орнатыңыз/іске қосыңыз (ол LG
телефондарында LG TV Plus деп аталады).
3 Смартфоныңызда мазмұн файлдарын басқа құрылғылармен бөлісу мүмкіндігін қосыңыз.
4 Құрылғы коннекторы қолданбасын таңдаңыз.
(Бастапқы) → Құрылғы коннекторы → Смартфон → МАЗМҰНДЫ ОРТАҚ
ПАЙДАЛАНУ.
5 Ойнатылатын файл түрін (фильм, дыбыс немесе фотосурет) таңдаңыз.
6 Теледидарда ойнатылатын фильм, музыка немесе фотосурет файлын таңдаңыз.
7 Теледидарда қарау және тамашалау үшін мультимедиялық файлды ойнатыңыз.
Теледидардың аппараттық-бағдарламалық құралын жаңарту
* Теледидар зауыттан жеткізілгеннен кейін бірінші рет қосылса, теледидарды баптандыру
бірнеше минутқа созылуы мүмкін.
(Бастапқы) →
(Параметрлер) → ( ) (Барлық параметрлер) →
Жалпы → Осы
теледидар туралы → Жаңартулардың бар екендігін тексеріңіз
2 Бағдарламалық құрал нұсқасын тексеріп, оны жаңартуыңызға болады.
Автоматты жаңартуға рұқсат ету"Автоматты жаңартуға рұқсат ету"құсбелгісін қойсаңыз, бағдарламалық
құралды автоматты түрде жаңартуға болады.
1
Сурет
Жалпы
Сурет
Дыбыс
Eco режимі
Дыбыс
Арналар
Желі
Жалпы
Қауіпсіздік
Арн. мүмк-р
Mobile TV қосулы
LG сымсыз пернетақтасы
Параметрлер анықтамасы
Сигнал кескіні жоқ
Бастапқы параметрлерге қалпына келтіру
Осы теледидар туралы
Пайдаланушы келісімдері

Арналар
Желі
Жалпы
Қауіпсіздік
Арн. мүмк-р
Осы теледидар туралы
Жалпы /
Бағдарламалық жасақтама нұсқасы
ꔐ
xx.xx.xx
Автоматты жаңартуға рұқсат ету
Жаңартулардың бар екендігін тексеріңіз
ТД ақпараты
Пайдаланушы нұсқаулығы
Бастапқы бағдарламалық жасақтама ақпаратын ашу
Идентификаторды орнату : 1
Wi-Fi тікелей параметрі
Wi-Fi Direct
Сурет Желі /
Дыбыс
Арналар
Желі
Жалпы
Қауіпсіздік
Арн. мүмк-р
ꔐ
ТІЗІМДІ ЖАҢАРТУ
(Бастапқы) →
(Параметрлер) → ( ) (Барлық параметрлер) →
Желі → Wi-Fi Direct
IЖергілікті желі қол жетімді емес болса, тасымалы құрылғыны теледидарға Wi-Fi
Direct көмегімен тікелей қосуыңызға болады.
арқылы Wi-Fi Direct функциясына қосылған құрылғылардың
файлдарын немесе экрандарын бөлісуге болады.
1 Wi-Fi Direct мәзірін ашқанда, қолжетімді құрылғылар тізімі шығады.
2 Байланыс сұрау үшін нұсқау берілгенде, ИӘ тармағын таңдаңыз. Wi-Fi Direct
енді теледидарға қосылды.
Miracast параметрі
Miracast тасымалы құрылғының теледидарға бейне мен дыбысты сымсыз жолмен қауіпсіз
жіберуіне мүмкіндік береді.
1 Тасымалы құрылғыдағы Miracast функциясы "қосу" күйіне орнатылуы керек.
2 Теледидар анықталғанда тасымалы құрылғыда құрылғыны таңдаңыз.
Қосылым аяқталғанда, теледидар экранында құрылғы экраны пайда болады.
Өзгеде сұрақтар жөнінде, LG компаниясының қызмет көрсету орталықтарына хабарласыңыз.
SMART TV Tezkor o'rnatish qo'llanmasi
* Ko'rsatilgan tasvir televizoringizdagidan farq qilishi mumkin.
* Kompyuter yoki uyali telefonda ko'rsatilgan tasvir OT (Operatsion tizim)ga bog'liq ravishda farq
qilishi mumkin.
* Ilova belgisi holatlari dastur versiyasiga qarab platformada farq qilishi mumkin.
Tarmoqni sozlash
1 Uy menyusiga kirish uchun masofadan boshqarish
pultida
(Uy) tugmasini bosing. Masofadan
boshqarish pultida
G’ildirak (OK) tugmasini
bosish orqali (Parametrlar) belgisini ajratib
ko'rsating va tanlang.
Rasm
Ovoz
Wi-Fi
Tarmoq /
ꔐ
Kanallar
Tarmoq
Umumiy
Xavfsizlik
Maxsus imkoniyat
Yashirin simsiz tarmoq qo‘shish
WPS PBC orqali ulanish
WPS PIN-kod orqali ulanish
Qo‘shimcha Wi-Fi parametrlar
belgisiga ega simsiz KN (Ruter) uchun xavfsizlik
kalitini kiritishingiz kerak.
5 Agar ulanish tugatilsa, "Internetga ulangan"
namoyish qilinadi.
2 Masofadan boshqarish pultida
( ) G’ildirak
(OK) tugmasini bosish orqali (Barcha
parametrlar) belgisini ajratib ko'rsating va tanlang.
Rasm
Tarmoq
Ovoz
TV nomi
Kanallar
Simli (Ethernet)
Ulanmagan
Wi-Fi
Tarmoq
Internetga ulangan
Wi-Fi Direct
Umumiy
Barcha parametrlar
(
3 Tarmoq → Simli (Ethernet) yoki Wi-Fi-ni tanlang.
Rasm
Tarmoq
Ovoz
TV nomi
Kanallar
Xavfsizlik
Maxsus imkoniyat
Ulanishning holatini Qo‘shimcha Wi-Fi
parametrlar-da tekshirishingiz mumkin.
Rasm
Simli (Ethernet)
Ulanmagan
Wi-Fi
Tarmoq
)
Ovoz
Wi-Fi
Tarmoq /
ꔐ
Ulanmagan
Wi-Fi Direct
Umumiy
Xavfsizlik
Maxsus imkoniyat
4 Qurilma avtomatik ravishda mavjud tarmoqqa
ulanishga harakat qiladi (avval simli ulanish).
Wi-Fi-ni tanlaganingizda, mavjud tarmoqlar
ro'yxati namoyish qilinadi. Foydalanmoqchi bo'lgan
tarmoqni tanlang.
Kanallar
Tarmoq
Umumiy
Xavfsizlik
Yashirin simsiz tarmoq qo‘shish
WPS PBC orqali ulanish
WPS PIN-kod orqali ulanish
Qo‘shimcha Wi-Fi parametrlar
Maxsus imkoniyat
www.lg.com
Tarmoq muammolari nosozliklarini bartaraf qilish
1 Uy menyusiga kirish uchun masofadan boshqarish
pultida
(Uy) tugmasini bosing. Masofadan
boshqarish pultida
G’ildirak (OK) tugmasini
bosish orqali (Parametrlar) belgisini ajratib
ko'rsating va tanlang.
AP (Router) tekshiring yoki Internet ta’minotchingiz
bilan maslahatlashing.
X Shlyuz yonida paydo bo'lganda:
1 Kirish nuqtasi AP (Router) kabelini uzing va 5
soniyadan keyin ulashga urinib ko'ring.
2 Kirish nuqtasini AP (Router) initsializatsiya qiling
(qayta tiklang).
3 Internet provayderi yoki AP (Router) ishlab
chiqaruvchisiga kompaniyalariga murojaat qiling.
2 Masofadan boshqarish pultida ( ) G’ildirak
(OK) tugmasini bosish orqali (Barcha
parametrlar) belgisini ajratib ko'rsating va tanlang.
(
Barcha parametrlar
)
3 Tarmoq → Simli (Ethernet) yoki Wi-Fi →
Qo‘shimcha Wi-Fi parametrlar-ni tanlang.
Rasm
Tarmoq
Rasm
Ovoz
TV nomi
Ovoz
Kanallar
Simli (Ethernet)
Ulanmagan
Wi-Fi
Tarmoq
Ulanmagan
Wi-Fi Direct

Wi-Fi
Tarmoq /
ꔐ
Kanallar
Tarmoq
Umumiy
Umumiy
Xavfsizlik
Xavfsizlik
Maxsus imkoniyat
Maxsus imkoniyat
Yashirin simsiz tarmoq qo‘shish
WPS PBC orqali ulanish
WPS PIN-kod orqali ulanish
Qo‘shimcha Wi-Fi parametrlar
Tarmog'ingiz holatiga tegishli bo'lgan quyidagi
ko'rsatmalarga amal qiling.
Televizor yoki AP (Router)ni tekshiring.
X Televizor yonida paydo bo'lganda:
1 TV, Kirish nuqtasi AP (Router) ulanish holatini
tekshiring.
2 TV, Kirish nuqtasini AP (Router) o'chiring va yoqing.
3 Agar siz statik IP dan foydalansangiz, to'g'ridanto'g'ri IP ni kiriting.
4 Internet provayderi yoki AP (Router) ishlab
chiqaruvchisiga kompaniyalariga murojaat qiling.
X DNS yonida paydo bo'lganda:
1 Kirish nuqtasi AP (Router) kabelini uzing va 5
soniyadan keyin ulashga urinib ko'ring.
2 Kirish nuqtasini AP (Router) initsializatsiya qiling
(qayta tiklang).
3 TV/AP (Router) ni MAC manzili Internet
ta’minotchingiz tomonidan ro'yxatga olinganligini
tekshiring. (Tarmoq holati oynasining o'ng panelida
ko’rsatilgan MAC manzili internet ta’minotchingiz
tomonidan ro'yxatga olingan bo'lishi kerak.)
4 Rauteringizga so’nggi versiyali dastur
o'rnatilganligiga ishonch hosil qilish uchun
rauteringiz ishlab chiqaruvchisi veb sahifasidan
tekshiring.
SmartShare PC SW (SHK dastur ta'minoti) ni o’rnatish va sozlash
1 Shahsiy Kompyuteringizga SmartShare PC SW (SHK dastur ta'minotini) dasturini o'rnating.
2
manziliga o'ting. Keyin mintaqangizni tanlang.
3 ПОДДЕРЖКА-ni tanlang. Keyin Drayverlar va ПО и программы-ni tanlang.
4 So'ngra rusumingizni kiriting. So’ng SmartShare PC SW ga o’ting.
5 O'rnatish tugallangach, siz dasturni ishga tushirishingiz mumkin.
ESLATMA
yy SmartShare xizmatidan faqat televizor va boshqa qurilmalar yagona rauter orqali
ulangandagina foydalanish mumkin.
Smartfonga SmartShare-ni ulash
1 Smartfoningizda Wi-Fi yoqilganligini tekshiring. SmartShare-dan foydalanish uchun ikkala
qurilma bir xil mahalliy tarmoqda bo'lishi kerak.
2 Smartfoningizda tarkibni baham ko'rish uchun ilovani o'rnating/ishlating (U LG telefonlarida LG
TV Plus deb ataladi).
3 Tarkib fayllarini boshqa qurilmalar bilan baham ko'rish uchun smartfoningizni yoqing.
4 Qurilma ulagichi ilovasini oching.
(Uy) → Qurilma ulagichi → Smartfon → TARKIBNI BAHAM KO‘RISH.
5 O'ynatmoqchi bo'lgan fayl turini tanlang (film, audio yoki fotosurat).
6 Televizorda o'ynatish uchun video, musiqa yoki fotosurat faylini tanlang.
7 Televizoringizda media faylni ko'rish va zavqlanish uchun uni o'ynating.
Televizor Firmware (mikrodasturi)ni yangilash
* Agar televizor zavoddan chiqarilgandan keyin ilk marta yoqilgan bo’lsa, uning initsializatsiyasi
uchun bir necha daqiqa vaqt sarflanishi mumkin.
1
(Asosiy) →
(Parametrlar) →
YANGILANISHLARNI QIDIRISH
(
) (Barcha parametrlar) →
Umumiy → Ushbu TV haqida →
2 Dasturiy ta'minot versiyasini tekshirishingiz va uni yangilashingiz mumkin.
Agar "Avtomatik yangilashlarga ruxsat berish" ni tekshirsangiz, dasturiy ta'minotni avtomatik ravishda
yangilashingiz mumkin.
Rasm
Umumiy
Ovoz
Eco rejim
Kanallar
Tarmoq
Umumiy
Xavfsizlik
Maxsus imkoniyat
Mobil TV faol
LG simsiz klaviatura
Parametrlar yordami
Signal mavjud emas tasviri
Birlamchi parametrlarga qaytarmoq
Ushbu TV haqida
Foydalanuvchi kelishuvlari
Rasm

Ovoz
Kanallar
Tarmoq
Umumiy
Xavfsizlik
Maxsus imkoniyat
Ushbu TV haqida
Umumiy /
Dastur versiyasi
ꔐ
xx.xx.xx
Avtomatik yangilashlarga ruxsat berish
Yangilanishlarni qidirish
TV ma’lumotlari
Foydalanuvchi qo‘llanmasi
Ochiq manba Dasturiy ta’minoti eslatmasi
ID-ni o‘rnatish : 1
Wi-Fi Direct ni o'rnatish
Wi-Fi Direct
Tarmoq /
Rasm
Ovoz
ꔐ
Kanallar
Tarmoq
Umumiy
Xavfsizlik
Maxsus imkoniyat
RO‘YXATNI YANGILASH
(Asosiy) →
(Parametrlar) → ( ) (Barcha parametrlar) →
Tarmoq → Wi-Fi
Direct
Agar mahalliy tarmoq mavjud bo'lmasa, Wi-Fi Direct-dan foydalangan holda ko'chma
qurilmani to'g'ridan to'g'ri televizorga ulashingiz mumkin.
orqali siz Wi-Fi Direct ga ulangan qurilmalarning fayllari yoki ekran tasvirlarni
ulashishingiz mumkin.
1 Wi-Fi Direct menyusini ochganingizda mavjud qurilmalar ro'yxati paydo bo'ladi.
2 Sizga ulanish so'rovi taklif qilinganda, HAni tanlang. Wi-Fi Direct televizoringizga
ulanadi.
Miracast-ni o'rnatish
Miracast portativ qurilmadagi video va ovozlarni Televizorga simsiz va xavfsiz ravishda yuborish
imkonini beradi.
1 Miracast portativ qurilmangizda "Yoq" -ga o'rnatilishi kerak.
2 Televizor aniqlanganda, portativ qurilmangizda qurilmani tanlang.
Ulanish tugatilganda qurilma ekrani televizor ekranida paydo bo'ladi.
Agar sizda qandaydir muammolar yuzaga kelsa, LG kompaniyasining iste’molchilarga xizmat ko'rsatish markaziga murojaat qiling.
SMART TV түргэн тохиргооны хөтөч
* Энд харагдах зураг нь таны зурагтаас өөр харагдаж болно.
* Үйлдлийн системээс хамаарч компьютер эсвэл гар утсан дээр харагдах зураг өөрөөр
харагдаж болно.
* Програм хангамжийн хувилбараас хамааран програмын дүрсийн байршил өөр өөр байж
болно.
Сүлжээний тохиргоо
1 Гэр цэсэнд хандахын тулд алсын удирдлага
дээрх
(Гэр) товчийг дар.
(Тохиргоо)
дүрсийг тодруулж, алсын удирдлага дээрх
Бөөрөнхий (ОК) товчийг дарж сонго.
Wi-Fi холболт
Сүлжээ /
Зураг
Дуу
ꔐ
Сувгууд
Сүлжээ
Ерөнхий
Нуусан утасгүй сүлжээ нэм
WPS PBC-р холбох
WPS PIN-р холбох
Аюулгүй
Дэвшилтэт Wi-Fi тохиргоо
Нэвтрэлт
2
Хэрэв утасгүй AP (Роүтер) нь
тэмдэгтэй
байвал, та хамгаалалтын нууц үг оруулах
шаардлагатай.
5 Хэрэв холболт гүйцэтгэгдсэн бол, "Интернэтэд
холболоо" гэж харагдана.
( ) (Бүх тохиргоо) дүрсийг тодруулж,
алсын удирдлага дээрх Бөөрөнхий (ОК)
товчийг дарж сонго.
Сүлжээ
Зураг
Дуу
TВ-н нэр
Утастай (Ethernet)
Сувгууд
Холбогдоогүй
Wi-Fi холболт
Бүх тохиргоо
(
3 Сүлжээ → Утастай (Ethernet) эсвэл Wi-Fi
холболт.
Зураг
Дуу
Сувгууд
Сүлжээ
Wi-Fi Direct
Ерөнхий
Аюулгүй
Нэвтрэлт
Та холболтын төлөвийг Дэвшилтэт Wi-Fi
тохиргоо - с харж болно.
TВ-н нэр
Утастай (Ethernet)
Холбогдоогүй
Wi-Fi холболт
Сүлжээ
)
Интернэтэд холболоо
Сүлжээ
Холбогдоогүй
Wi-Fi Direct
Зураг
Дуу
Wi-Fi холболт
Сүлжээ /
ꔐ
Ерөнхий
Сувгууд
Аюулгүй
Сүлжээ
Нэвтрэлт
Ерөнхий
4 Төхөөрөмж сүлжээ боломжтой болвол
автоматаар холбогдохыг оролдоно(утасгүй
сүлжээнд эхлээд).
Танд Wi-Fi холболт боломжтой сүлжээний
жагсаалт харагдана. Та ашиглахыг хүссэн
сүлжээг сонго.
Аюулгүй
Нуусан утасгүй сүлжээ нэм
WPS PBC-р холбох
WPS PIN-р холбох
Дэвшилтэт Wi-Fi тохиргоо
Нэвтрэлт
www.lg.com
Сүлжээний асуудал оношлох
1 Гэр цэсэнд хандахын тулд алсын удирдлага
дээрх
(Гэр) товчийг дар.
(Тохиргоо)
дүрсийг тодруулж, алсын удирдлага дээрх
Бөөрөнхий (ОК) товчийг дарж сонго.
Рoүтерээ шалга эсвэл Интернетийн үйлчилгээ
үзүүлэгчтэйгээ холбогдоно уу.
( ) (Бүх тохиргоо) дүрсийг тодруулж, алсын
удирдлага дээрх Бөөрөнхий (ОК) товчийг
дарж сонго.
2
(
Бүх тохиргоо
3 Сүлжээ → Утастай (Ethernet) эсвэл Wi-Fi
холболт → Дэвшилтэт Wi-Fi тохиргоо.
Зураг
Дуу
Сувгууд
Сүлжээ
Дуу
TВ-н нэр
Утастай (Ethernet)
Холбогдоогүй
Wi-Fi холболт
Сүлжээ
Зураг
Холбогдоогүй
Wi-Fi Direct

Wi-Fi холболт
Сүлжээ /
ꔐ
Сувгууд
Сүлжээ
Ерөнхий
Ерөнхий
Аюулгүй
Аюулгүй
Нэвтрэлт
Нэвтрэлт
Нуусан утасгүй сүлжээ нэм
WPS PBC-р холбох
WPS PIN-р холбох
Дэвшилтэт Wi-Fi тохиргоо
Доорх зааврыг дагаж өөрийн сүлжээний төлвийг
харьцуулна уу.
ТВ эсвэл AP роүтер шалга.
Хэрэв зурагтын хажууд X тэмдэг гарч ирвэл:
1 TV, AP (Роүтер)-ийн холболтын төлвийг шалга.
2 TV, AP (Роүтер)-ийг унтрааж, асаа.
3 Хэрэв та статик IP ашиглаж байгаа бол, шууд IP
-г хий.
4 Интернет үйлчилгээ үзүүлэгч эсвэл AP (Роүтер)
компаниудтай холбогдоно уу.
)
Хэрэв гаралтын хажууд X тэмдэг гарч ирвэл:
1 AP (Роүтер)-ийн тэжээлийн залгуурыг салгаад, 5
секундын дараа ахин залгаж үзнэ үү.
2 AP (Роүтер)-ийг таниул (дахин тохируул).
3 Интернет үйлчилгээ үзүүлэгч эсвэл AP (Роүтер)
компаниудтай холбогдоно уу.
Хэрэв DNS ийн хажууд X тэмдэг гарч ирвэл:
1 AP (Роүтер)-ийн тэжээлийн залгуурыг салгаад, 5
секундын дараа ахин залгаж үзнэ үү.
2 AP (Роүтер)-ийг таниул (дахин тохируул).
3 Өөрийн Интернет үйлчилгээ үзүүлэгчээс
бүртгүүлсэн ТВ/роүтерийн MAК хаягийг шалга.
(Сүлжээний төлвийн цонхны баруун цонхонд
харагдах МАК хаяг нь таны Интернет үйлчилгээ
үзүүлэгчид бүртгэгдсэн байх ёстой.)
4 Роүтерийн үйлдвэрлэгчийн вебсайтыг шалгаж
таны роүтер дээр хамгийн сүүлийн үеийн
програм хангамж суусан эсэхийг шалгана уу.
SmartShare PC SW Суулгах & Тохиргоо
1 SmartShare PC SW програмыг өөрийн РС дээрээ суулга.
2
руу ор. Дараа нь, бүсийг сонго.
3 ДЭМЖЛЭГ -г сонго. Дараа нь, Drivers & Software, Програмын шинэчлэл сонго эсвэл Software &
Firmware сонго.
4 Өөрийн загварыг сонго. Дараа нь, сонго SmartShare PC SW.
5 Суулгалт дууссаны дараа програмыг ажиллуулж болно.
ТЭМДЭГЛЭЛ
yy SmartShare үйлчилгээ нь Зурагт болон бусад төхөөрөмжүүд зөвхөн нэг роүтерт
холбогдсон үед л ашиглах боломжтой.
SmartShare Холболт ухаалаг утас руу холбогдох
1 Таны ухаалаг утсан дээр Wi-Fi идэвхжүүлсэн эсэхийг шалга. SmartShareашиглахын
тулд, төхөөрөмжүүд ижил сүлжээнд холбоотой байх ёстой.
2 Ухаалаг утсан дээрээ агуулга хуваалцах програм ажиллуул/суулга (Түүнийг LG утсан
дээр LG TV Plus гэдэг).
3 Өөрийн ухаалаг утасыг бусад төхөөрөмжүүдтэй хуваалцах боломжийг олго.
4 Төхөөрөмж холбогч програмыг нээ.
(Гэр) → Төхөөрөмж холбогч → Ухаалаг утас → АГУУЛГА ХУВААЛЦАЛТ.
5 Та тоглуулахыг хүссэн файлын төрлийг сонго (кино, аудио эсвэл зураг).
6 Кино, хөгжим эсвэл фото файлыг ТВ дээр тоглуулахаар сонго.
7 Медиа файлыг тоглуулж ТВ дээрээ үз.
Зурагтын программыг шинэчлэж байна
* Хэрэв ТВ-ийг үйлдвэрээс ачсанаас хойш анх удаа асаавал, ТВ-ийг танихад хэдэн минут болж
магадгүй.
(Гэр) →
(Тохиргоо) → ( ) (Бүх тохиргоо) →
Ерөнхий → Уг ТВ-н тухай → Шинэчлэлийг
шалгах
2 Та програмын хувилбарыг шалгаад шинэчлэж болно.
Хэрэв та "Автомат шинэчлэл зөвшөөрөх" шалгавал,та програмыг автоматаар шинэчлэж болно.
1
Зураг
Дуу
Сувгууд
Сүлжээ
Ерөнхий
Аюулгүй
Нэвтрэлт
Ерөнхий
Eco горим
Mobile TV аслаа
LG Wireless Keyboard
Тохиргооны тусламж
Дохионы зураг алга
Анхны тохиргоо руу тохируулах
Уг ТВ-н тухай
Хэрэглэгчийн гэрээ
Зураг

Дуу
Сувгууд
Сүлжээ
Ерөнхий
Аюулгүй
Нэвтрэлт
Уг ТВ-н тухай
Ерөнхий /
Програмын хувилбар
ꔐ
xx.xx.xx
Автомат шинэчлэл зөвшөөрөх
Шинэчлэлийг шалгах
ТВ мэдээлэл
Ашиглах заавар
Open Source програм хангамжийн мэдэгдэл
ID-г тохируул : 1
Wi-Fi Direct Тохиргоо
Wi-Fi Direct
Зураг
Сүлжээ /
Дуу
ꔐ
Сувгууд
Сүлжээ
Ерөнхий
Аюулгүй
Нэвтрэлт
ЛИСТИЙГ ШИНЭЧЛЭХ
(Гэр) →
(Тохиргоо) → ( ) (Бүх тохиргоо) →
Сүлжээ → Wi-Fi Direct
Хэрэв дотоод сүлжээ боломжгүй байвал, та зөөврийн төхөөрөмжийг Wi-Fi Direct
ашиглаж байгаа ТВ рүү холбож болно.
-р Wi-Fi Direct-д холбогдсон төхөөрөмжүүд хооронд файлууд эсвэл
дэлгэцүүд хуваалцаж болно.
1 Та Wi-Fi Direct цэсийг нээхэд боломжтой төхөөрөмжүүдийн жагсаалт гарч
ирнэ.
2 Та холболт хийх хүсэлт хийх тухай сануулахыг хүсвэл, ТИЙМ гэдгийг сонго.
Wi-Fi Direct нь одоо таны ТВ тэй холбогдсон.
Miracast Тохиргоо
Miracast нь таны зөөврийн төхөөрөмжийг хамгаалалттайгаар видео болон дууг утасгүйгээр ТВ
рүү явуулах боломжийг олгодог.
1 Та зөөврийн төхөөрөмж дээрх Miracast -н "Асаах" байх ёстой.
2 Таны ТВ илрүүлэгдсэн үед, таны зөөврийн төхөөрөмж дээрх төхөөрөмжийг сонго.
Холболт хийгдсэний дараа ТВ-ын дэлгэц дээр төхөөрөмжийн дэлгэц гарч ирнэ.
Та ямар нэг асуудалтай тулгарвал LG Хэрэглэгчийн Үйлчилгээтэй холбогдоно уу.
OWNER’S MANUAL
EXTERNAL CONTROL
DEVICE SETUP
Please read this manual carefully before operating the set and retain it for
future reference.
www.lg.com
2
KEY CODES
ENGLISH
ENG
KEY CODES
• This feature is not available for all models.
Code
(Hexa)
Function
Note
Code
(Hexa)
Function
Note
00
CH +, PR +
R/C Button
53
List
R/C Button
01
CH -, PR -
R/C Button
5B
Exit
R/C Button
02
Volume +
R/C Button
60
PIP(AD)
R/C Button
03
Volume -
R/C Button
61
Blue
R/C Button
06
> (Arrow Key / Right Key)
R/C Button
63
Yellow
R/C Button
07
< (Arrow Key / Left Key)
R/C Button
71
Green
R/C Button
08
Power
R/C Button
72
Red
R/C Button
09
Mute
R/C Button
79
Ratio / Aspect Ratio
R/C Button
0B
Input
R/C Button
91
AD (Audio Description)
R/C Button
0E
SLEEP
R/C Button
9E
LIVE MENU
R/C Button
0F
TV, TV/RAD
R/C Button
7A
User Guide
R/C Button
R/C Button
7C
Smart / Home
R/C Button
10 - 19 * Number Key 0 - 9
1A
Q.View / Flashback
R/C Button
7E
SIMPLINK
R/C Button
1E
FAV (Favorite Channel)
R/C Button
8E
►► (Forward)
R/C Button
20
Text (Teletext)
R/C Button
8F
◄◄ (Rewind)
R/C Button
21
T. Opt (Teletext Option)
R/C Button
AA
Info
R/C Button
28
Return (BACK)
R/C Button
AB
Program Guide
R/C Button
30
AV (Audio / Video) Mode
R/C Button
B0
► (Play)
R/C Button
39
Caption/Subtitle
R/C Button
B1
ꕗ (Stop / File List)
R/C Button
40
Λ (Arrow Key / Cursor Up)
R/C Button
B5
RECENT
R/C Button
41
V (Arrow Key / Cursor
Down)
R/C Button
BA
ꕘ (Freeze / Slow Play /
Pause)
R/C Button
42
My Apps
R/C Button
BB
Soccer
R/C Button
43
Menu / Settings
R/C Button
BD
ꔄ (REC)
R/C Button
44
OK / Enter
R/C Button
DC
3D
R/C Button
45
Q.Menu
R/C Button
99
AutoConfig
R/C Button
4C
List, - (ATSC Only)
R/C Button
9F
App / *
R/C Button
4D
PICTURE
R/C Button
9B
TV / PC
R/C Button
52
SOUND
R/C Button
* Key code 4C (0x4C) is available on ATSC/ISDB models which use major/minor channel.
(For South Korea, Japan, North America, Latin America except Colombia models)
EXTERNAL CONTROL DEVICE SETUP
3
• Image shown may differ from your TV.
Connect the USB to Serial converter/RS-232C input jack to an external control device (such as a computer
or an A/V control system) to control the product’s functions externally.
Note: The type of control port on the TV can be different between model series.
* Please be advised that not all models support this type of connectivity.
* Cable is not provided.
USB to Serial converter with USB Cable
USB IN
USB Type
(PC)
(TV)
• LGTV supports PL2303 chip-based (Vendor ID : 0x0557, Product
ID :IN0x2008) USB to serial converter
RS-232C
(CONTROL & SERVICE)
which is not made nor provided by LG.
• It can be purchased from computer stores that carry accessories for IT support professionals.
(TV)
(PC)
USB IN
RS-232C With RS232C Cable
(PC)
(TV)
SERVICE ONLY
DE9 (D-Sub 9pin) Type
1
• You need to purchase the RS-232C (DE9, D-Sub
3 9pin female-to-female type) to RS-232C cable required
for the connection between the PC and the TV, which is specified in the manual.
(PC)
2
RS-232C IN
(CONTROL & SERVICE)
(PC)
SERVICE ONLY
1
3
RS-232C IN
(CONTROL & SERVICE)
2
(PC)
(TV)
1
3
(PC)
The connection interface may differ from your TV.
(TV)
2
(TV)
(TV)
1
3
(PC)
RS-232C IN
2
RS-232C IN
(CONTROL & SERVICE)
RS-232C IN
(CONTROL & SERVICE)
(CONTROL & SERVICE)
(TV)
ENGLISH
ENG
EXTERNAL CONTROL DEVICE SETUP
USB USB
IN IN
4
EXTERNAL CONTROL DEVICE SETUP
(PC)
(PC)
(TV)
(TV)
RS-232C IN
(CONTROL
SERVICE)
• You need to purchase the phone-jack to RS-232 cable required
for &the
connection between the PC and
the TV, which is specified in the manual.
RS-232C IN
(PC)
(PC)
(CONTROL & SERVICE)
* For other models, connect to the USB port.
* The connection interface may differ from your TV.
1
3
(PC)
(PC)
1
3
2
2
- or
(TV)
(TV)
(TV)
(TV)
1
3
(PC)
(PC)
SERVICE
ONLY ONLY
SERVICE
ENGLISH
ENG
Phone jack Type
1
3
RS-232C IN
(CONTROL & SERVICE)
2
RS-232C IN
(CONTROL & SERVICE)
2
Customer Computer
(TV)
(TV)
RS-232C configurations
3-Wire Configurations(Not standard)
1
5
PC
RXD
RS-232C IN
(CONTROL & SERVICE)
TXD
RS-232C IN
(CONTROL & SERVICE)
GND
6
2
2
TXD
3
1
RXD
5
3
GND
OR
9
RS-232C
(Serial port)
TV
RXD
3
2
TXD
TXD
2
1
RXD
GND
5
3
GND
D-Sub 9
Phone
Set ID
For Set ID number, see "Real Data Mapping" on p.6
1. Press SETTINGS to access the main menus.
2. Press the Navigation buttons to scroll to (*General → About this TV or OPTION) and press OK.
3. Press the Navigation buttons to scroll to SET ID and press OK.
4. Scroll left or right to select a set ID number and select CLOSE. The adjustment range is 1-99.
5. When you are finished, press EXIT.
* (Depending on model)
EXTERNAL CONTROL DEVICE SETUP
5
• Baud rate : 9600 bps (UART)
• Data length : 8 bits
• Parity : None
ENGLISH
ENG
Communication Parameters
• Stop bit : 1 bit
• Communication code : ASCII code
• Use a crossed (reverse) cable.
Command reference list
(Depending on model)
COMMAND1 COMMAND2
DATA
(Hexadecimal)
01. Power*
k
a
00 to 01
02. Aspect
Ratio
k
c
(p.7)
03. Screen
Mute
k
d
(p.7)
k
e
00 to 01
k
f
00 to 64
06. Contrast
k
g
00 to 64
07.
Brightness
k
h
00 to 64
08. Color/
Colour
k
i
00 to 64
09. Tint
k
j
00 to 64
k
00 to 32
l
00 to 01
m
00 to 01
04. Volume
Mute
05. Volume
Control
10.
k
Sharpness
11. OSD
k
Select
12. Remote
Control Lock k
Mode
13. Treble
k
r
00 to 64
14. Bass
k
s
00 to 64
COMMAND1 COMMAND2
DATA
(Hexadecimal)
15. Balance k
16. Color
(Colour)
x
Temperature
17. ISM
Method (Only j
Plasma TV)
t
00 to 64
u
00 to 64
p
(p.8)
18. Equalizer j
v
(p.8)
q
00 to 05
a
(p.9)
b
00 to 01
19. Energy
j
Saving
20. Tune
m
Command
21. Channel m
(Programme)
Add/Del(Skip)
22. Key
m
c
Key Codes
23. Control
Backlight,
Control Panel
Light
24. Input
select (Main)
25. 3D (Only
3D models)
26. Extended
3D (Only 3D
models)
27. Auto
Configure
m
g
00 to 64
x
b
(p.11)
x
t
(p.11)
x
v
(p.12)
j
u
(p.12)
* Note:During playing or recording media, all commands except Power (ka) and Key (mc) are not
executed and treated as NG.
With RS232C cable, TV can communicate "ka command" in power-on or power-off status. but with
USB-to-Serial converter cable, the command works only if TV is on.
6
EXTERNAL CONTROL DEVICE SETUP
ENGLISH
ENG
Transmission / Receiving Protocol
Transmission
[Command1][Command2][ ][Set ID][ ][Data][Cr]
[Command 1] : First command to control the TV. (j, k, m or x)
[Command 2] : Second command to control the TV.
[Set ID]
:You can adjust the [Set ID] to choose desired monitor ID number in option menu.
Adjustment range in TV is 1 to 99. If [Set ID] value is selected to ‘0’, every connected set
can be controlled.
* [Set ID] is indicated as decimal (1 to 99) on menu and as Hexadecimal (0x00 to 0x63) on
transmission/receiving protocol.
[DATA]
: To transmit command data (hexadecimal). Transmit ‘FF’ data to read status of command.
[Cr]
: Carriage Return - ASCII code ‘0x0D’
[ ]
: Space – ASCII code ‘0x20’
OK Acknowledgement
[Command2][ ][Set ID][ ][OK][Data][x]
* The set transmits ACK (acknowledgement) based on this format when receiving normal data. At this time,
if the data is data read mode, it indicates present status data. If the data is data write mode, it returns the
data of the PC computer.
Error Acknowledgement
[Command2][ ][Set ID][ ][NG][Data][x]
* The set transmits ACK (acknowledgement) based on this format when receiving abnormal data from
non-viable functions or communication errors.
Data 00: Illegal Code
Real data mapping (Hexadecimal b Decimal)
* When you enter the [data] in hexadecimal, refer to following conversion table.
* Channel Tune (ma) Command uses two-byte hexadecimal value([data]) to select channel number.
00 : Step 0
01 : Step 1 (Set ID 1)
...
0A : Step 10 (Set ID 10)
...
0F : Step 15 (Set ID 15)
10 : Step 16 (Set ID 16)
...
32 : Step 50 (Set ID 50)
33 : Step 51 (Set ID 51)
...
63 : Step 99 (Set ID 99)
...
C7 : Step 199
C8 : Step 200
...
FE : Step 254
FF : Step 255
...
01 00 : Step 256
...
27 0E : Step 9998
27 0F : Step 9999
...
EXTERNAL CONTROL DEVICE SETUP
7
01. Power (Command: k a)
►► To control Power *On or Off of the set.
Transmission[k][a][ ][Set ID][ ][Data][Cr]
Data 00 : Power Off
01 : *Power On
Ack [a][ ][Set ID][ ][OK/NG][Data][x]
►► To Show TV is Power On or *Off
Transmission [k][a][ ][Set ID][ ][FF][Cr]
Ack [a][ ][Set ID][ ][OK][Data][x]
* Similarly, if other functions transmit ‘FF’ data
based on this format, Acknowledgement feedback
presents status about each function.
02. Aspect Ratio (Command: k c)
(Main Picture Size)
►► To adjust the screen format. (Main picture format)
You can also adjust the screen format using the
Aspect Ratio in the Q.MENU. or PICTURE menu.
Transmission [k][c][ ][Set ID][ ][Data][Cr]
Data 01 : Normal screen 07 : 14:9
(4:3)
(Europe, Colombia, Mid-East,
02 : Wide screen
Asia except South Korea and
(16:9)
Japan)
04 : Zoom
09 : * Just Scan
05 : Zoom 2
0B : Full Wide
(Latin America
(Europe, Colombia, Midexcept Colombia
East, Asia except South
Only)
Korea and Japan)
06 : Set by Program/ 10 to 1F : Cinema Zoom 1 to 16
Original
0c : 21:9 (Depending on model)
Ack [c][ ][Set ID][ ][OK/NG][Data][x]
Ack [d][ ][Set ID][ ][OK/NG][Data][x]
* In case of video mute on only, TV will display On
Screen Display(OSD). But, in case of Screen mute
on, TV will not display OSD.
04. Volume Mute (Command: k e)
►► To control volume mute on/off.
You can also adjust mute using the MUTE button
on remote control.
Transmission [k][e][ ][Set ID][ ][Data][Cr]
Data 00 : Volume mute on (Volume off)
01 : Volume mute off (Volume on)
Ack [e][ ][Set ID][ ][OK/NG][Data][x]
05. Volume Control (Command: k f)
►► To adjust volume.
You can also adjust volume with the volume
buttons on remote control.
Transmission [k][f][ ][Set ID][ ][Data][Cr]
Data Min : 00 to Max : 64
Ack [f][ ][Set ID][ ][OK/NG][Data][x]
06. Contrast (Command: k g)
►► To adjust screen contrast.
You can also adjust contrast in the PICTURE
menu.
Transmission [k][g][ ][Set ID][ ][Data][Cr]
Data Min : 00 to Max : 64
Ack [g][ ][Set ID][ ][OK/NG][Data][x]
* Using the PC input, you select either 16:9 or 4:3
screen aspect ratio.
* In DTV/HDMI/Component mode (high-definition),
Just Scan is available.
* Full wide mode may work differently based on
model and is supported for DTV fully, and ATV,
AV partially.
07. Brightness (Command: k h)
►► To adjust screen brightness.
You can also adjust brightness in the PICTURE
menu.
Transmission [k][h][ ][Set ID][ ][Data][Cr]
Data Min : 00 to Max : 64
03. Screen Mute (Command: k d)
►► To select screen mute on/off.
Transmission [k][d][ ][Set ID][ ][Data][Cr]
Data 00 : Screen mute off (Picture on)
Video mute off
01 : Screen mute on (Picture off)
10 : Video mute on
Ack [h][ ][Set ID][ ][OK/NG][Data][x]
ENGLISH
ENG
* Commands may work differently depending on model and signal.
8
EXTERNAL CONTROL DEVICE SETUP
ENGLISH
ENG
08. Color/Colour (Command: k i)
13. Treble (Command: k r)
►► To adjust the screen Color(Colour).
You can also adjust colour in the PICTURE menu.
►► To adjust treble.
You can also adjust in the AUDIO menu.
Transmission [k][i][ ][Set ID][ ][Data][Cr]
Data Min : 00 to Max : 64
Ack [i][ ][Set ID][ ][OK/NG][Data][x]
09. Tint (Command: k j)
►► To adjust the screen tint.
You can also adjust tint in the PICTURE menu.
Transmission [k][j][ ][Set ID][ ][Data][Cr]
Data Red : 0
0 to Green : 64
Ack [j][ ][Set ID][ ][OK/NG][Data][x]
Transmission [k][r][ ][Set ID][ ][Data][Cr]
Data Min : 00 to Max : 64
Ack [r][ ][Set ID][ ][OK/NG][Data][x]
* (Depending on model)
14. Bass (Command: k s)
►► To adjust Bass.
You can also adjust in the AUDIO menu.
Transmission [k][s][ ][Set ID][ ][Data][Cr]
Data Min : 00 to Max : 64
10. Sharpness (Command: k k)
►► To adjust the screen sharpness.
You can also adjust sharpness in the PICTURE
menu.
Transmission [k][k][ ][Set ID][ ][Data][Cr]
Ack [s][ ][Set ID][ ][OK/NG][Data][x]
* (Depending on model)
15. Balance (Command: k t)
►► To adjust balance.
You can also adjust balance in the AUDIO menu.
Transmission [k][t][ ][Set ID][ ][Data][Cr]
Data Min : 00 to Max : 32
Ack [k][ ][Set ID][ ][OK/NG][Data][x]
Data Min : 00 to Max : 64
Ack [t][ ][Set ID][ ][OK/NG][Data][x]
11. OSD Select (Command: k l)
►► To select OSD (On Screen Display) on/off when
controlling remotely.
Transmission [k][l][ ][Set ID][ ][Data][Cr]
Data 00 : OSD off
01 : OSD on
Ack [l][ ][Set ID][ ][OK/NG][Data][x]
12. Remote control lock mode (Command: k m)
►► To lock the front panel controls on the monitor and
remote control.
Transmission [k][m][ ][Set ID][ ][Data][Cr]
Data 00 : Lock off
01 : Lock on
Ack [m][ ][Set ID][ ][OK/NG][Data][x]
* If you are not using the remote control, use this
mode.
When main power is off & on (plug-off and plug-in,
after 20 - 30 seconds), external control lock is
released.
* In the standby mode (DC off by off timer or ‘ka’,
‘mc’ command), and if key lock is on, TV will not
turn on by power on key of IR & Local Key.
16. Color(Colour) Temperature (Command: x u)
►► To adjust colour temperature. You can also adjust
Color(Colour) Temperature in the PICTURE menu.
Transmission [x][u][ ][Set ID][ ][Data][Cr]
Data Min : 00 to Max : 64
Ack [u][ ][Set ID][ ][OK/NG][Data][x]
17. ISM Method (Command: j p) (Only Plasma TV)
►► To control the ISM method. You can also adjust
ISM Method in OPTION menu.
Transmission [j][p][ ][Set ID][ ][Data][Cr]
Data Min : 02: Orbiter
08: Normal
20: Color(Colour) Wash
Ack [p][ ][Set ID][ ][OK/NG][Data][x]
EXTERNAL CONTROL DEVICE SETUP
* Analog Antenna/Cable
►► Adjust EQ of the set.
Transmission [j][v][ ][Set ID][ ][Data][Cr]
MSB
0
[Data 00][Data 01] Channel Data
Data 00 : High byte channel data
Data 01 : Low byte channel data
- 00 00 ~ 00 C7 (Decimal : 0 ~ 199)
LSB
0
0
0
0
Frequency
0
0
0
Data 02 : Input Source (Analog)
- 00 : Antenna TV (ATV)
- 80 : Cable TV (CATV)
Data
7
6
5
Frequency
4
3
2
1
0
Step
0
0
0
1st Band
0
0
0
0
0
0(decimal)
0
0
1
2nd Band
0
0
0
0
1
1(decimal)
0
1
0
3rd Band
...
...
...
...
...
...
0
1
1
4th Band
1
0
0
1
1
19(decimal)
1
0
0
5th Band
1
0
1
0
1
20(decimal)
Acknowledgement [v][ ][Set ID][ ][OK/NG][Data][x]
* It depends on model, and can adjust when sound
mode is EQ adjustable value.
19. Energy Saving (Command: j q)
►► To reduce the power consumption of the TV. You
can also adjust Energy Saving in PICTURE menu.
Transmission [j][q][ ][Set ID][ ][Data][Cr]
Data
00 : Off
01 : Minimum
02 : Medium
03 : Maximum
04 : Auto (For LCD TV / LED TV) /
Intelligent sensor (For PDP TV)
05 : Screen off
* (Depending on model)
Ack [q][ ][Set ID][ ][OK/NG][Data][x]
20. Tune Command (Command: m a)
* This command may work differently depending on
model and signal.
• For Europe, Mid-East, Colombia, Asia except
South Korea and Japan Model
►► Select channel to following physical number.
Transmission [m][a][ ][Set ID][ ][Data 00][ ]
[Data 01][ ][Data 02][Cr]
* Digital Antenna/Cable/Satellite
[Data 00][Data 01]: Channel Data
Data 00 : High Channel data
Data 01 : Low Channel data
- 00 00 ~ 27 0F (Decimal: 0 ~ 9999)
Data 02 : Input Source (Digital)
- 10 : Antenna TV (DTV)
- 20 : Antenna Radio (Radio)
- 40 : Satellite TV (SDTV)
- 50 : Satellite Radio (S-Radio)
- 90 : Cable TV (CADTV)
- a0 : Cable Radio (CA-Radio)
* Tune Command Examples:
1. Tune to the Analog antenna (PAL) Channel 10.
Set ID = All = 00
Data 00 & 01 = Channel Data is 10 = 00 0a
Data 02 = Analog Antenna TV = 00
Result = ma 00 00 0a 00
2. Tune to the digital antenna (DVB-T) Channel 01.
Set ID = All = 00
Data 00 & 01 = Channel Data is 1 = 00 01
Data 02 = Digital Antenna TV = 10
Result = ma 00 00 01 10
3. Tune to the satellite (DVB-S) Channel 1000.
Set ID = All = 00
Data 00 & 01 = Channel Data is 1000 = 03 E8
Data 02 = Digital Satellite TV = 40
Result = ma 00 03 E8 40
Ack [a][ ][Set ID][ ][OK][Data 00][Data 01]
[Data 02][x][a][ ][Set ID][ ][NG][Data 00][x]
• For South Korea, North/Latin America except
Colombia Model
►► To tune channel to following physical/major/minor
number.
Transmission [m][a][ ][0][ ][Data00][ ][Data01]
[ ][Data02][ ][Data03][ ][Data04][ ][Data05][Cr]
Digital channels have a Physical, Major, and Minor
channel number. The Physical number is the actual
digital channel number, the Major is the number that
the channel should be mapped to, and the Minor is
the sub-channel. Since the ATSC tuner automatically
maps the channel from the Major / Minor number,
the Physical number is not required when sending a
command in Digital.
ENGLISH
ENG
18. Equalizer (Command : j v)
9
10 EXTERNAL CONTROL DEVICE SETUP
ENGLISH
ENG
* Analog Antenna/Cable
Data 00 : Physical Channel Number
- Antenna (ATV) : 02~45 (Decimal: 2 ~ 69)
- Cable (CATV) : 01, 0E~7D (Decimal : 1, 14~125)
[Data 01 ~ 04]: Major/Minor Channel Number
Data 01 & 02: xx (Don't care)
Data 03 & 04: xx (Don't care)
Data 05: Input Source (Analog)
- 00 : Antenna TV (ATV)
- 01 : Cable TV (CATV)
2.Tune to the digital antenna (ATSC) channel 30-3.
Set ID = All = 00
Data 00 = Don’t know Physical = 00
Data 01 & 02 = Major is 30 = 00 1E
Data 03 & 04 = Minor is 3 = 00 03
Data 05 = Digital Antenna TV = 22
Total = ma 00 00 00 1E 00 03 22
Ack [a][ ][Set ID][ ][OK][Data 00][Data 01]
[Data 02][Data 03][Data 04][Data 05]
[x][a][ ][Set ID][ ][NG][Data 00][x]
• For Japan Model
* Digital Antenna/Cable
►► To tune channel to following physical/major/minor
number.
Data 00 : xx (Don't care)
Transmission [m][a][ ][0][ ][Data00][ ][Data01]
[Data 01][Data 02]: Major Channel Number
Data 01 : High byte Channel Data
Data 02 : Low byte Channel Data
- 00 01 ~ 27 0F (Decimal: 1 ~ 9999)
[Data 03][Data 04]: Minor Channel Number
Data 03 : High byte Channel Data
Data 04 : Low byte Channel Data
Data 05 : Input Source (Digital)
- 02 : Antenna TV (DTV) – Use Physical Channel
Number
- 06 : Cable TV (CADTV) – Use Physical Channel
Number
- 22 : Antenna TV (DTV) – Don’t Use Physical
Channel Number
- 26 : Cable TV (CADTV) - Don’t Use Physical
Channel Number
- 46 : Cable TV (CADTV) – Use Physical/Major
Channel Number Only (One Part Channel)
- 66 : Cable TV (CADTV) – Use Major Channel
Number Only (One Part Channel)
- 0b : Cable DTV Plus – Use Physical Channel
Number
- 2b : Cable DTV Plus – Don’t Use Physical
Channel Number
- 4b : Cable DTV Plus – Use Physical/Major
Channel Number Only (One Part Channel)
- 6b : Cable DTV Plus – Use Major Channel
Number Only (One Part Channel)
Two bytes are available for each major and minor
channel data, but usually the low byte is used alone
(high byte is 0).
* Tune Command Examples:
1.Tune to the Analog cable (NTSC) channel 35.
Set ID = All = 00
Data 00 = Channel Data is 35 = 23
Data 01 & 02 = No Major = 00 00
Data 03 & 04 = No Minor = 00 00
Data 05 = Analog Cable TV = 01
Total = ma 00 23 00 00 00 00 01
[ ][Data02][ ][Data03][ ][Data04][ ][Data05][Cr]
* Digital Antenna/Satellite
Data 00: xx (Don't care)
[Data 01][Data 02]: Major Channel Number
Data 01: High byte Channel Data
Data 02: Low byte Channel Data
- 00 01 ~ 27 0F (Decimal: 1 ~ 9999)
[Data 03][Data 04]: Minor/Branch Channel Number
(Don’t care in Satellite)
Data 03: High byte Channel Data
Data 04: Low byte Channel Data
Data 05 : Input Source (Digital/Satellite for Japan)
- 02 : Antenna TV (DTV)
- 42 : Antenna TV (DTV) – Use Physical/Major
Channel Number Only (One Part Channel)
- 62 : Antenna TV (DTV) – Use Major Channel
Number Only (One Part Channel)
- 07 : BS (Broadcasting Satellite)
- 08 : CS1 (Communication Satellite 1)
- 09 : CS2 (Communication Satellite 2)
* Tune Command Examples:
1 Tune to the digital antenna (ISDB-T) channel 17-1.
Set ID = All = 00
Data 00 = Don’t know Physical = 00
Data 01 & 02 = Major is 17 = 00 11
Data 03 & 04 = Minor/Branch is 1 = 00 01
Data 05 = Digital Antenna TV = 02
Total = ma 00 00 00 11 00 01 02
EXTERNAL CONTROL DEVICE SETUP
►► To select input source for main picture.
Transmission [x][b][ ][Set ID][ ][Data][Cr]
* This feature is varied based on the model.
Ack [a][ ][Set ID][ ][OK][Data 00][Data 01]
[Data 02][Data 03][Data 04][Data 05]
[x][a][ ][Set ID][ ][NG][Data 00][x]
21. Channel(Programme) Add/Del(Skip)
(Command: m b)
►► To skip current channel(programme) for next time.
Transmission [m][b][ ][Set ID][ ][Data][Cr]
01 : Add
Ack [b][ ][Set ID][ ][OK/NG][Data][x]
* Set the saved channel status to del(ATSC, ISDB)/
skip(DVB) or add.
22. Key (Command: m c)
►► To send IR remote key code.
Transmission [m][c][ ][Set ID][ ][Data][Cr]
Data Key code - p.2.
Ack [c][ ][Set ID][ ][OK/NG][Data][x]
23. Control Backlight (Command: m g)
• For LCD TV / LED TV
►► To control the backlight.
Transmission [m][g][ ][Set ID][ ][Data][Cr]
Data Min : 00 to Max : 64
Ack [g][ ][Set ID][ ][OK/NG][Data][x]
Control Panel Light (Command: m g)
• For Plasma TV
►► To control the panel light.
Transmission [m][g][ ][Set ID][ ][Data][Cr]
Data Min : 00 to Max : 64
Ack [g][ ][Set ID][ ][OK/NG][Data][x]
Data
00 : DTV
01 : CADTV
02 : Satellite DTV
10 : ATV
ISDB-BS (Japan)
03 : ISDB-CS1 (Japan)
04 : ISDB-CS2 (Japan)
11 : CATV
20 : AV or AV1
21 : AV2
40 : Component1
60 : RGB
41 : Component2
90 : HDMI1
92 : HDMI3
91 : HDMI2
93 : HDMI4
Ack [b][ ][Set ID][ ][OK/NG][Data][x]
* This function depends on model and signal.
25. 3D(Command: x t) (only 3D models)
(Depending on model)
►► To change 3D mode for TV.
Transmission [x][t][ ][Set ID][ ][Data 00][ ][Data 01]
[ ][Data 02][ ][Data 03][Cr]
* (Depending on model)
Data Structure
[Data 00]00 : 3D On
01 : 3D Off
02 : 3D to 2D
03 : 2D to 3D
[Data 01]00 : Top and Bottom
01 : Side by Side
02 : Check Board
03 : Frame Sequential
04 : Column interleaving
05 : Row interleaving
[Data 02]00 : Right to Left
01 : Left to Right
[Data 03]3D Effect(3D Depth): Min : 00 - Max : 14
(*transmit by Hexadecimal code)
ENGLISH
ENG
24. Input select (Command: x b)
(Main Picture Input)
2. Tune to the BS (ISDB-BS) channel 30.
Set ID = All = 00
Data 00 = Don’t know Physical = 00
Data 01 & 02 = Major is 30 = 00 1E
Data 03 & 04 = Don’t Care = 00 00
Data 05 = Digital BS TV = 07
Total = ma 00 00 00 1E 00 00 07
Data 00 : Del(ATSC,ISDB)/Skip(DVB)
11
12 EXTERNAL CONTROL DEVICE SETUP
ENGLISH
ENG
* [Data 02], [Data 03] functions depend on model
and signal.
* If [Data 00] is 00 (3D On), [Data 03] has no
meaning.
3) When[Data 00] is 06, 07
00 : Off
01 : On
* If [Data 00] is 00 (3D On) or 03 (2D to 3D), [Data
03] works when 3D Mode (Genre) is manual only.
4) When[Data 00] is 08
00 : Revert to 3D video from 3D-to-2D
converted 2D video
01 : Change 3D video to 2D video, except
2D-to-3D video
* If conversion condition doesn’t meet, command is
treated as NG.
* All 3D pattern options ([Data 01]) may not be
available according to broadcasting/video signal.
5) When [Data 00] is 09
* If [Data 00] is 01 (3D off) or 02 (3D to 2D), [Data
01], [Data 02] and [Data 03] have no meaning.
* If [Data 00] is 03 (2D to 3D), [Data 01] and
[Data 02] have no meaning.
00 : Standard
02 : Cinema
04 : Manual
01 : Sport
03 : Extreme
05 : Auto
[Data 00]
[Data 01]
[Data 02]
[Data 03]
00
O
O
O
01
X
X
X
Ack [v][ ][Set ID][ ][OK][Data00][Data01][x]
02
X
X
X
[v][ ][Set ID][ ][NG][Data00][x]
03
X
O
O
X : don’t care
Ack [t][ ][Set ID][ ][OK][Data00][Data01][Data02]
[Data03][x]
[t][ ][Set ID][ ][NG][Data00][x]
26. Extended 3D(Command: x v) (only 3D models)
(Depending on model)
►► To change 3D option for TV.
Transmission [x][v][ ][Set ID][ ][Data 00][ ]
[Data 01][Cr]
[Data 00]3D option
00 : 3D Picture Correction
01 : 3D Depth (3D Mode is Manual Only)
02 : 3D Viewpoint
06 : 3D Color Correction
07 : 3D Sound Zooming
08 : Normal Image View
09 : 3D Mode (Genre)
[Data 01]It has own range for each 3D option
determined by [Data 00].
1) When[Data 00] is 00
00 : Right to Left
01 : Left to Right
2) When[Data 00] is 01, 02
DataMin: 0 - Max: 14 (*transmit by Hexadecimal
code)
Data value range(0 - 20) converts Viewpoint range
(-10 - +10) automatically (Depending on model)
* This option works when 3D Mode (Genre) is manual
only.
27. Auto Configure (Command: j u)
(Depending on model)
►► To adjust picture position and minimize image
shaking automatically. It works only in RGB (PC)
mode.
Transmission [j][u][ ][Set ID][ ][Data][Cr]
Data 01 : To set Auto Configure
Ack [u][ ][Set ID][ ][OK/NG][Data][x]
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising