LG | CL98 | User manual | LG CL98 Руководство пользователя

LG CL98 Руководство пользователя
OWNER’S MANUAL
Mini Hi-Fi
System
Please read this manual carefully before operating your set and retain it for future
reference.
MODEL
CL98 (CL98, NL98F)
MFL71261011
1905_Rev01
www.lg.com
Copyright © 2019 LG Electronics Inc. All Rights Reserved.
2
Getting Started
Safety Information
1
CAUTION
Getting Started
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK DO NOT REMOVE COVER (OR BACK)
NO USER-SERVICEABLE PARTS INSIDE REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
This lightning flash with arrowhead
symbol within an equilateral
triangle is intended to alert the
user to the presence of uninsulated
dangerous voltage within the
product’s enclosure that may be of
sufficient magnitude to constitute
a risk of electric shock to persons.
The exclamation point within an
equilateral triangle is intended
to alert the user to the presence
of important operating and
maintenance (servicing)
instructions in the literature
accompanying the product.
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN
OR MOISTURE.
CAUTION: The apparatus should not be exposed to
water (dripping or splashing) and no objects filled
with liquids, such as vases, should be placed on the
apparatus.
WARNING: Do not install this equipment in a
confined space such as a book case or similar unit.
CAUTION: Do not use high voltage products around
this product. (ex. Electrical swatter) This product may
malfunction due to electrical shock.
CAUTION: This product employs a Laser System.
To ensure proper use of this product, please read
this owner’s manual carefully and retain it for future
reference. Shall the unit require maintenance, contact
an authorized service center.
Use of controls, adjustments or the performance of
procedures other than those specified herein may
result in hazardous radiation exposure. To prevent
direct exposure to laser beam, do not try to open the
enclosure.
CAUTION: Do not block any ventilation openings.
Install in accordance with the manufacturer’s
instructions.
Slots and openings in the cabinet are provided for
ventilation and to ensure reliable operation of the
product and to protect it from over heating. The
openings should never be blocked by placing the
product on a bed, sofa, rug or other similar surface.
This product should not be placed in a built-in
installation such as a bookcase or rack unless
proper ventilation is provided or the manufacturer’s
instruction has been adhered to.
NOTICE: For safety marking information including
product identification and supply ratings, please refer
to the main label on the bottom or the other surface
of the product.
Getting Started
CAUTION concerning the Power Cord
The Power Plug is the disconnecting device. In case
of an emergency, the Power Plug must remain readily
accessible.
CAUTION: No naked flame sources, such as lighted
candles, should be placed on the apparatus.
Symbols
~
Do not overload wall outlets. Overloaded wall outlets,
loose or damaged wall outlets, extension cords,
frayed power cords, or damaged or cracked wire
insulation are dangerous. Any of these conditions
could result in electric shock or fire. Periodically
examine the cord of your device, and if its appearance
indicates damage or deterioration, unplug it,
discontinue use of the device, and have the cord
replaced with an exact replacement part by an
authorized service center. Protect the power cord
from physical or mechanical abuse, such as being
twisted, kinked, pinched, closed in a door, or walked
upon. Pay particular attention to plugs, wall outlets,
and the point where the cord exits the device.
0
* speaker duct: A hole for plentiful bass sound on
speaker cabinet (enclosure)
Refers to alternating current(AC).
Refers to direct current(DC).
Refers to class II equipment.
1
Refers to stand-by.
!
Refers to “ON” (power).
Refers to dangerous voltage.
1
Getting Started
Check the specification page of this owner’s manual
to be certain of the current requirements.
CAUTION: Be careful to make sure children do not
put their hands or any objects into the *speaker duct.
3
4
Table of Contents
Table of Contents
1
Getting Started
3
Operating
2
6
7
7
7
7
8
10
12
Safety Information
Unique Features
Playable file Requirement
– Music file requirement
– Compatible USB Devices
– USB device requirement
Remote control
Front panel
Rear panel
2
Connecting
14
14
15
15
How to affix the ferrite core
– About Ferrite Core
Connecting to speakers
– Attaching the speaker light cables to the
unit
Optional Equipment Connection
– AUX IN 1 Connection
– AUX IN 2 Connection
– USB Connection
– Antenna Connection
18
18
18
19
20
21
21
21
22
22
23
23
24
24
Basic Operations
– CD/USB Operations
– Auto Play
– Selecting a folder and an MP3/WMA file
– Deleting a file/folder or format
Playback Effect
– DJ EFFECT
– DJ SCRATCHER
– AUTO DJ
– DJ PAD
– DJ LOOP
– PARTY ACCELERATOR
Using BLUETOOTH® wireless technology
– Listening to music stored on the Bluetooth
devices
Using the LG XBOOM App
– About “LG XBOOM” App
– Install “LG XBOOM” App onto Your
Bluetooth Device
– Activate Bluetooth with “LG XBOOM” App
Radio Operations
– Listening to the radio
– Improving poor FM reception
– Presetting the Radio Stations
– Deleting all the saved stations
16
16
16
17
17
27
27
27
28
29
29
29
29
29
Table of Contents
30
30
30
31
32
32
32
32
32
33
35
36
36
36
37
37
38
38
38
39
40
Sound adjustment
– Setting the sound mode
– Setting the USER EQ
– JUKE BOX Playback
Other Operations
– Turn off the sound temporarily
– CHILDSAFE Mode
– DEMO
– Resume stop
– Using Microphone
– LIGHTING
– Sleep Timer Setting
– Dimmer
– Auto power down
– AUTO POWER On
– Auto function change
Setting the Clock
– Setting the Clock through “LG XBOOM” App
– Using your player as an alarm clock
LG Sound Sync
WIRELESS PARTY LINK Connection
4
Troubleshooting
41
41
42
Troubleshooting
– General
– NOTES to release Demo mode
5
Appendix
43
44
44
45
45
45
General specifications
Speakers specifications
Trademarks and Licenses
Maintenance
– Notes on Discs
– Handling the Unit
5
1
2
3
4
5
6
Getting Started
Unique Features
1
BLUETOOTH®
Listens to music stored on your Bluetooth device.
Getting Started
Playback effects
Listens to music with various sound and playback
effects.
LG XBOOM
LG XBOOM is an app designed to let you take control
of some of LG’s latest audio devices.
(Page 27-28)
LG Sound Sync
Controls volume level of this unit by the remote
control of your LG TV that is compatible with LG
Sound Sync.
Getting Started
7
Playable file
Requirement
yy MP3 Player: Flash type MP3 player.
Music file requirement
yy The USB function of this unit does not support all
USB devices.
yy Sampling frequency: within 32 to 48 kHz (MP3),
within 32 to 48 kHz (WMA)
yy Bit rate: within 32 to 320 kbps (MP3),
40 to 192 kbps (WMA)
yy USB Flash Drive:
Devices that support USB2.0 or USB1.1.
USB device requirement
yy Devices which require additional program
installation when you have connected it to a
computer, are not supported.
yy Do not extract the USB device while in operation.
yy Maximum folders: Data CD: 99 / USB: 200
yy For a large capacity USB, it may take longer than a
few minute to be searched.
yy File extensions: “.mp3”/ “.wma”
yy To prevent data loss, back up all data.
yy Certain MP3/WMA files may not be played
depending on the type or format of the file.
yy If you use a USB extension cable or USB hub, the
USB device is not recognized.
yy CD-ROM file format: ISO 9660/ JOLIET
yy Using NTFS file system is not supported. (Only
FAT(16/ 32) file system is supported.)
yy Maximum files: Data CD: 999 / USB: 2,000
yy We recommend that you use Easy-CD Creator,
which creates an ISO 9660 file system.
yy This unit recognizes up to 2,000 files.
yy A protected file by DRM (Digital rights
management) cannot be played on the unit.
yy External HDD, Card readers, Locked devices, or
hard type USB devices are not supported.
yy The DTS disc is not supported.
yy USB port of the unit cannot be connected to PC.
The unit cannot be used as a storage device.
You have to set the disc format option to [Mastered]
in order to make the discs compatible with the LG
players when formatting rewritable discs. When
setting the option to Live File System, you cannot use
it on LG players.
(Mastered/Live File System: Disc format system for
Windows Vista)
yy Some USB may not work with this unit.
1
Getting Started
MP3/WMA file compatibility with this unit is limited
as follows.
Compatible USB Devices
8
Getting Started
Remote control
• • • • • • • • • • • • • • a• • • • • • • • • • • • • •
1 (Standby): Turns the power on or off.
B (Open/Close): Opens and closes the disc tray.
VOL (Volume) +/-: Adjusts speaker volume.
1
Getting Started
F (Function): Selects the function and input source.
Input source / Function
Display
Disc
CD
USB
USB 1 / USB 2
AUX (3.5 mm) input
AUX input
Bluetooth
LG Sound Sync (Wireless)
Radio
AUX 1
AUX 2
BT
LG TV
FM
[(Mute): Mutes the sound.
PRESET·FOLDER W/S:
-- Chooses a preset number for a radio station.
(Page 29)
-- Searches for a folder of MP3/WMA files. When
a CD/USB containing MP3/WMA files in several
folders is being played, press PRESET·FOLDER
W/S to select the folder you want to play.
JUKEBOX/MEMORY:
-- Stores radio stations. (Page 29)
-- Selects JUKE BOX mode. (Page 31)
-- Makes JUKE BOX list.
AUTO DJ: Selects the AUTO DJ mode. (Page 22)
Replacement of battery
DELETE:
-- Deletes MP3/WMA files. (USB only) (Page 20)
-- Deletes a song on the JUKE BOX list.
-- Deletes all the saved stations.
(R03
)
(R03)
Remove the battery cover on the rear of the remote
control, and insert the battery with 4 and 5
matched correctly.
Getting Started
9
• • • • • • • • • • • • • • c• • • • • • • • • • • • • •
REPEAT: Listens to your tracks/files repeatedly or
randomly.
0 to 9 numerical buttons: Selects numbered tracks,
files, or preset number.
TUNING-/+: Selects the radio stations.
CLOCK: Sets a clock and checks a time.
C/V (Skip/Search):
-- Skips backward or forward.
ALARM: With the ALARM function you can turn on
CD, USB play and tuner reception at a desired time.
-- Searches for a section within a track/file.
• • • • • • • • • • • • • • d• • • • • • • • • • • • • •
N (Play/Pause):
VOICE CANCELLER: You can reduce the vocal tones
during music playback from various input sources.
-- Starts or pauses playback.
-- Stops playback.
SLEEP: Sets the system to turn off automatically at
a specified time.
(Dimmer: The display window will be darkened by
half.)
-- Cancels DELETE function.
SET: Confirms the setting.
EQUALIZER: Chooses sound impressions.
SPECIAL EQ: Chooses special equalizer.
KEY CHANGER (L/l): Changes the key to suit your
vocal range.
J (Information):
MIC (Microphone) ECHO: Selects ECHO mode.
-- Sees information about your music. An MP3 file
often come with ID3 tag. The tag gives the Title,
Artist, Album or Time information.
VOCAL EFFECTS: Selects various vocal effects
mode.
-- Selects stereo/mono.
Z (Stop):
-- Sees Bluetooth device name of the unit in BT
READY.
-- Sees the name of connected all Bluetooth device
in Bluetooth mode.
-- When these units are successfully connected each
other in WIRELESS PARTY LINK mode, each of
connected device names appears in the each unit.
?: This button is not available.
?: This button is not available.
1
Getting Started
• • • • • • • • • • • • • • b• • • • • • • • • • • • • •
10 Getting Started
Front panel
a
1
b
c
d
e
Getting Started
n
f
m
l
k ji
h
g
f MASTER VOLUME
a USB 1 Port
You can play sound files by connecting the USB
device.
b 1 (Standby)
-- Adjusts speaker volume.
-- Selects the lighting effects.
-- Selects vocal effects
Turns the power on or off.
LIGHTING
c Display window
Selects the lighting mode.
d F (Function)
MIC VOL (Microphone volume) -/+
Selects the function and input source.
Input source / Function
Display
Disc
CD
USB
USB 1 / USB 2
AUX (3.5 mm) input
AUX 1
AUX input
AUX 2
Bluetooth
BT
LG Sound Sync (Wireless)
LG TV
Radio
FM
e USB 2 Port
You can play sound files by connecting the USB
device.
Adjusts microphone volume.
MIC (Microphone) ECHO
Selects ECHO mode.
g
(Remote sensor)
MIC (Microphone) 1/2 jack
AUX IN 1 jack
h KEY CHANGER (L/l)
Changes the key to suit your vocal range.
VOICE CANCELLER
You can reduce the vocal tones during music
playback from various input sources.
VOCAL EFFECTS
Selects various vocal effects mode.
Getting Started
i 3 TWIN
Connects two speakers for TWIN mode in
WIRELESS PARTY LINK.
DJ LOOP
N (Play/Pause)
-- Starts or pauses playback.
-- Selects stereo/mono.
V (Skip/Search)
-- Skips forward.
-- Searches for a section within a track/file.
-- Selects the radio stations.
PARTY ACCELERATOR MODE
Selects PARTY ACCELERATOR MODE.
j Disc tray
k PARTY ACCELERATOR lever
Slide the lever to create a party atmosphere.
l DEMO
In power off status, if you press DEMO, show
DEMO mode.
SPECIAL EQ / BASS BLAST (or BASS BLAST+)
-- Chooses special equalizer.
-- Press and hold to select BASS (or BASS+) effect
directly.
Z (Stop)
Stops playback or cancels DELETE function.
C (Skip/Search)
-- Skips backward.
-- Searches for a section within a track/file.
-- Selects the radio stations.
B (Open/Close)
Opens and closes the disc tray.
m CLUB, DRUM, USER (DJ PAD)
Selects CLUB, DRUM or USER sound effect to
mix.
(If you want to use USER, you have to register a
source with “LG XBOOM” app.)
1, 2, 3, 4 (DJ PAD)
Press a desired sound pad.
n DJ SCRATCHER / LEVEL CONTROL & SEARCH
-- T urns clockwise or counterclockwise to make
scratch sound.
-- T urns clockwise or counterclockwise to control
the USER EQ level.
-- Searches a folder or a file.
-- Adjust DJ EFFECT level.
DJ EFFECT
Selects a desired DJ EFFECT.
SEARCH
Moves to folder or file in selection mode.
OK
Selects a folder when searching a file.
USER EQ
Selects the equalizer created by your own.
1
Getting Started
Selects DJ LOOP mode.
(DJ LOOP mode can use during CD/USB
playback.)
11
12 Getting Started
Rear panel
1
Getting Started
a
150
b c
150
d
e
a Power cord
>>Caution
yy Connect the power cord to wall outlet
directly if possible. Or when you use an
extension cable, it is highly recommended
to use an extension cable of 110 V / 15 A
or 230 V / 15 A, otherwise the unit may
not operate properly because of the lack of
power supply.
yy Do not overload the extension cord with
excessive electrical load.
b ANTENNA (FM)
c AUX IN 2 (L/R)
Connect an auxiliary device.
d SPEAKER LIGHTING SYSTEM
Connect the speaker lighting cables.
e SPEAKERS connector
Getting Started
13
Useful functions for using the unit
Function
Description
Do this
BT Lock On/Off It allows you to connect a
Bluetooth device only on BT
(Page 26)
(Bluetooth) and LG TV functions.
ON
Press and hold N for 5 seconds in BT
(Bluetooth) function.
Auto Power On It allows the unit to turn on
automatically by input signals:
(Page 37)
BT (Bluetooth) or LG TV
ON
Initial setting of this function was OFF
set to off.
OFF
Press and hold N for 5 seconds in BT
(Bluetooth) function.
Turn off the unit by pressing 1 on the unit
for 5 seconds.
Turn off the unit by pressing 1 on the unit
for 5 seconds.
1
Getting Started
To do
14 Connecting
How to affix the ferrite
core
Ferrite core may not be provided depending on each
nation’s regulations.
About Ferrite Core
2
Connecting
You must affix a ferrite core in order to reduce or
eliminate electrical interference.
1. Pull the stopper [a] of the ferrite core to open.
2. Wind the power cord around the ferrite core
twice.
3. Close the ferrite core until it clicks.
150
150
Connecting 15
Connecting to speakers
Connect the speaker cable plugs to the SPEAKERS
connector. Make sure to connect the speaker’s plug
to the corresponding colored speaker connector
when connecting the plug.
Attaching the speaker light
cables to the unit
150
yy When you connect the speakers to the unit,
make sure to connect the speaker’s cable and
plug to the corresponding speaker connector.
yy The speakers must be placed a minimum
of 20 cm from the unit for preventing the
vibration caused by the speakers.
150
20 cm
150
150
20 cm
yy Check the volume level before playing music
to prevent infirm, child, and pregnant women
from being shocked by the sudden and loud
sound from the unit.
yy Do not use the unit in a limited space.
It may damage a person’s hearing. It is
recommended to use it in a wide space.
yy Use the speaker supplied with this unit
only. Using any other speaker may cause
malfunction.
yy The speakers contain magnet parts, so color
irregularity may occur on the TV screen or PC
monitor screen. Please use the speakers far
away from either TV screen or PC monitor.
>>Caution
yy Make sure that the jacks and the speakers
are matched correctly.
yy Make sure to connect the cables to
connectors tightly on the unit.
yy Avoid looking at the speaker lights for a long
time. It may cause damage to eyesight.
2
Connecting
To connect the speaker light cable to the unit,
insert the cable to SPEAKER LIGHTING SYSTEM
connectors on the unit.
>>Caution
yy Do not try to lift the speaker alone. It needs
two persons to lift the speaker. Otherwise
it may result in the speaker malfunction
and cause personal injury and/or property
damage.
16 Connecting
Optional Equipment
Connection
AUX IN 1 Connection
2
AUX IN 2 Connection
Connect an output of auxiliary device (Camcorder, TV,
Player, etc) to the AUX IN 2 (L/R) connector.
If your device has only one output for audio(mono),
connect it to the left(white) audio jack on the unit.
Connect an output (earphone or line out) of portable
device (MP3 or PMP etc) to the AUX IN 1 (3.5 mm)
connector.
Connecting
150
150
White
Red
Audio cable
3.5 mm stereo cable
DVD, Blu-ray player etc.
Listening to music from your portable
player or external device
The unit can be used to play the music from many
types of portable player or external device.
1. Connect the portable player to the AUX IN 1
connector of the unit.
Or
Connect the external device to the AUX IN 2
connector of the unit.
2. Turn the power on by pressing 1.
3. Press F to select AUX 1 or AUX 2 function.
4. Turn on the portable player or external device and
start it playing.
,,Note
Automatically switches to the AUX 1 function
when you connect the portable device to the
AUX IN 1 connector.
Connecting 17
USB Connection
Antenna Connection
Connect a USB device (or MP3 player, etc.) to the
USB ports on the unit.
Connect the supplied FM antenna for listening to
the radio.
Connect the FM wire antenna to the FM antenna
connector.
USB device
2
USB 1
150
USB 2
FM antenna
,,Note
Removing the USB device from the unit:
1. Choose a different function/mode or
press Z twice in a row.
2. Remove the USB device from the unit.
,,Note
Be sure to fully extend the FM wire antenna.
Connecting
150
18 Operating
Basic Operations
CD/USB Operations
1. Insert the disc by pressing B.
Or connect the USB device to the USB port.
2. Select CD or USB function by pressing F.
3
To
Stop
Press Z.
Playback
Press N.
Pause
Do this
On Display
Operating
Press 0 to 9 numerical buttons on
the remote control to go to the
desired file or track directly.
Description
OFF
Plays songs in order and stops
the playback.
ONE
Plays a same song repeatedly.
FOLDER
Plays songs in a folder
repeatedly. (Except AUDIO CD)
ALL
Plays all the songs repeatedly.
SHUFFLE
Press N during playback.
Searching
Press and hold C/V during
for a section
playback and release it at the point
within a track/
you want to listen to.
file
Selecting
a track/file
directly
,,Note
yy Repeat/Shuffle playback operates as follows.
Plays all the songs once
randomly, and stops the
playback.
yy When you play JUKE BOX list, only ONE and
ALL are available.
yy Even after restarting the unit or switching
one function to another, you can listen to
music from the point where it’s last been
played.
yy If you leave the disc tray open for 5 minutes,
it will close automatically.
-- In stop status,
Press C/V to go to the next/
previous track/file.
Auto Play
-- During playback,
-- AUDIO/MP3/WMA CD is played automatically
after disc tray is opened and then closed.
(1) By using C/V buttons:
Skipping to
the next/
previous
track/file
Press V to go to the next track/
file.
Playing in less than 3 seconds,
press C to go to the previous
track/file.
Playing after 3 seconds, press C
to go to the beginning of the track/
file.
(2) By using SEARCH buttons:
Rotate DJ SCRATCHER / LEVEL
CONTROL & SEARCH or C/V
and press N to play the track/file.
Press REPEAT on the remote
Playing
control repeatedly. Refer to the
repeatedly or
note for details about the display
randomly
change.
-- Automatically the unit switches to the CD
function if disc tray is opened and then closed
even when there is no disc in disc tray.
Operating 19
Selecting a folder and an MP3/
WMA file
On the unit
,,Note
yy CD/USB Folders/Files are recognized as
below.
*
1. Press SEARCH and rotate DJ SCRATCHER /
LEVEL CONTROL & SEARCH or C/V until a
desired file appears. You can also search a folder if
you press SEARCH again.
2. Press OK or N to play the selected file. When
you search a folder, press OK to select a file in the
folder, then press OK or N again. The selected
file is played.
On the remote control
3
Operating
1. Press PRESET·FOLDER W/S repeatedly until a
desired folder appears.
2. Select the file you want by using C/V.
3. Press N to play it.
yy If there is no file in a folder, the folder will not
appear.
yy Folders will be presented as the following
order;
ROOT FOLDER 1 FOLDER 3
FOLDER 7 FOLDER 8 FOLDER 5
FOLDER 6
yy File will be played from $ file No.1 to $ file
No.14 one by one.
yy Files and folders will be presented in order
recorded and may be presented differently
according to the record circumstances.
*ROOT: The first screen you can see when a
computer recognize the CD/USB is “ROOT”.
20 Operating
Deleting a file/folder or format
You can delete file, folder on your USB or format the
USB.
1. Select USB function by pressing F.
2. Press DELETE on the remote control repeatedly,
the display changes as followings.
DEL FILE
DEL DIR
On Display
3
FORMAT
Description
Operating
DEL FILE
Select the file you want to
delete.
DEL DIR
Select the folder you want to
delete.
FORMAT
Select to format the USB device.
If you want to exit the current mode, press Z.
3. To delete file/folder or format, press and hold
DELETE on the remote control.
>>Caution
yy Do not extract the USB device during
operation. (play, delete, etc.)
yy Regular back up is recommended to prevent
data loss.
yy The delete function may not be supported
according to the USB status. (lock, etc.)
Operating 21
Playback Effect
The unit supports various sound and playback effects :
DJ EFFECT, DJ SCRATCHER, AUTO DJ, DJ PAD,
DJ LOOP, PARTY ACCELERATOR
DJ EFFECT
It allows you to enjoy DJ EFFECT such as FLANGER/
PHASER/WAH/DELAY sound effect.
DJ SCRATCHER
You can output and mix the sound effects of the DJ
SCRATCHER.
Rotating DJ SCRATCHER / LEVEL CONTROL &
SEARCH on the unit to mix the scratch sound.
-- You can hear effect of scratch sound depending
on the direction in which you rotate
DJ SCRATCHER / LEVEL CONTROL & SEARCH
on the unit.
1. Press DJ EFFECT on the unit to select a desired
DJ EFFECT (FLANGER, PHASER, WAH, DELAY,
OFF).
,,Note
yy The DJ EFFECT mode is displayed for 3
seconds when a DJ EFFECT key on the unit
is inputted.
yy The current gage level is displayed when
adjusting gage.
yy If the function changed or the unit is turned
off and on, DJ EFFECT mode with DJ EFFECT
is turned off.
yy According to effect level and application time,
the DJ EFFECT may not effect when the DJ
effect cover the original sound.
3
Operating
2. Turn DJ SCRATCHER / LEVEL CONTROL
& SEARCH on the unit clockwise or
counterclockwise to adjust the DJ EFFECT level
between 0 to 15.
22 Operating
AUTO DJ
DJ PAD
AUTO DJ blends the end of one song into the
beginning of another for seamless playback.
It equalizes volume across tracks/files for
uninterrupted playback.
It allows you to mix CLUB, DRUM or USER sound
effect. Each mode has up to 4 sounds effect.
Press AUTO DJ on the remote control repeatedly, the
display changes as followings.
SHUFFLE
SEQUENTIAL
OFF
On Display
Description
OFF
-
SHUFFLE
The music is played randomly on
this mode.
SEQUENTIAL
The music is played repeatedly on
this mode.
3
Operating
,,Note
yy AUTO DJ mode does not support searching
for a section within a track/file or to play
repeatedly or randomly.
yy If you move to other functions or stop the
music using Z on AUTO DJ mode, AUTO DJ
will be disabled.
yy AUTO DJ is not supported in the music file
whose length is less than 60 seconds.
yy Only SEQUENTIAL is selected when played
JUKE BOX list.
1. Press and hold DJ PAD (CLUB, DRUM or USER)
on the unit to select a desired DJ PAD sound
effect.
2. Press DJ PAD (1, 2, 3, 4) of desired sound on
the unit.
,,Note
yy If you want to use USER, you have to register
a source with “LG XBOOM” app.
If the source is not register to USER, “EMPTY”
or “NO SOUND” appears on the display
window.
yy Initial DJ PAD mode is CLUB sound effect.
yy DJ PAD mode is displayed for 3 seconds
when you press DJ PAD (CLUB, DRUM or
USER) on the unit.
yy The DJ PAD sound is mixed when you press
DJ PAD (1, 2, 3, 4) on the unit.
yy The currently playing DJ PAD sound is
stopped and the selected DJ PAD sound
outputs if you press a different DJ PAD
(1, 2, 3, 4) on the unit while DJ PAD sound
is playing.
Operating 23
DJ LOOP
The certain section (about 1 sec) of sound is
repeatedly played. (CD, USB Only)
During playback, press and hold DJ LOOP on the unit
at the point you want. And you can cancel DJ LOOP
function by releasing it.
,,Note
This function is released after operating 10
times or releasing DJ LOOP on the unit.
PARTY ACCELERATOR
It allows you to create a party atmosphere.
MODE 1
MODE 2
USER
2. After selecting the mode, slide up the lever of
PARTY ACCELERATOR on the unit to create a
party atmosphere.
The sound effect will react according to moving
the lever of PARTY ACCELERATOR on the unit.
OFF
ACCEL 1
,,Note
ACCEL 2
CLIMAX
If you want to use USER, you have to register
a source with “LG XBOOM” app. If the source is
not register to USER, “EMPTY” or “NO SOUND”
appears on the display window.
3
Operating
1. Select the mode by pressing PARTY
ACCELERATOR MODE on the unit.
The sound effect will react differently according
to the mode.
24 Operating
Using BLUETOOTH®
wireless technology
Listening to music stored on the
Bluetooth devices
About Bluetooth
Before you start the pairing procedure, make
sure the Bluetooth feature is activated on your
Bluetooth device. Refer to your Bluetooth device’s
user guide. Once a pairing operation is performed, it
does not need to be performed again.
Bluetooth is wireless communication technology for
short range connection.
The sound may be interrupted when the connection
interfered by the other electronic wave or you
connect the Bluetooth in the other rooms.
3
Operating
Connecting individual devices under Bluetooth
wireless technology does not incur any charges. A
mobile phone with Bluetooth wireless technology
can be operated via the Cascade if the connection
was made via Bluetooth wireless technology.
yy Available Devices: Smart phone, MP3, Notebook,
etc.
yy Version: 4.0
yy Codec: SBC, AAC
Bluetooth Profiles
In order to use Bluetooth wireless technology,
devices must be able to interpret certain profiles.
This unit is compatible with following profile.
A2DP (Advanced Audio Distribution Profile)
Pairing your unit and Bluetooth device
1. Turn on the unit.
,,Note
When Bluetooth connection lock is activated,
you can search Bluetooth device in BT
(Bluetooth) function.
2. Operate the Bluetooth device and perform the
pairing operation. When searching for this unit
with the Bluetooth device, a list of the devices
found may appear in the Bluetooth device display
depending on the type of Bluetooth device. Your
unit appears as “LG CL98 (XX)”.
,,Note
yy XX means the last two digits of
Bluetooth address. For example, if your
unit has a Bluetooth address such as
9C:02:98:4A:F7:08, you will see “LG CL98
(08)” on your Bluetooth device.
yy Depending on the Bluetooth device type,
some devices have a different pairing way.
For details about Bluetooth pairing,
refer to your Bluetooth device manual.
yy You can connect this unit with up to 3
Bluetooth devices simultaneously using the
same method as described above, only in the
BT (Bluetooth) function.
yy The multi phone pairing connection is only
supported on Android devices. (Multi phone
pairing connection may not be supported
depending on the connected device
specifications.)
yy Removable/detachable Bluetooth devices
(Ex: Dongle etc.) will not support multi phone
pairing.
Operating 25
3. When this unit is successfully connected with
your Bluetooth device, “PAIRED” appears on the
display window and change to Bluetooth device
name soon. Then “BT” will appear on the display
window.
,,Note
yy "PAIRED" will momentarily appear on the
display when you connect other devices for
multi phone pairing.
yy If the device name is unavailable, “_” will be
displayed.
4. Listen to music.
To play a music stored on your Bluetooth device,
refer to your Bluetooth device’s user guide.
-- There is an obstacle between the unit and
the Bluetooth device.
-- There is a device using same frequency
with Bluetooth technology such as a
medical equipment, a microwave or a
wireless LAN device.
yy If Bluetooth connection does not work well,
try pairing it again.
yy Even if this unit is connected up to 3
Bluetooth devices in the Bluetooth mode,
you can play and control music by using only
one of the connected devices.
yy Depending on the type of the device, you
may not be able to use the BT (Bluetooth)
function.
yy You can enjoy wireless system using phone,
MP3, Notebook, etc.
yy The more distance between the unit and the
Bluetooth device, the lower the sound quality
becomes.
yy Bluetooth connection will be disconnected
when the unit is turned off or the Bluetooth
device gets too far from the unit.
yy When Bluetooth connection is disconnected,
connect the Bluetooth device to the unit
again.
yy When a Bluetooth device is not connected,
“BT READY” appears on the display window.
yy When you use the BT (Bluetooth) function,
adjust the volume to a proper level on the
Bluetooth device.
yy When you connect Bluetooth device (iOS
device etc.) to this unit or operate the device,
the volume level can be synchronized with
each other.
yy Bluetooth connection will be disconnected
when you change the BT (Bluetooth)
function to some other function. In “LG
XBOOM” app connection, only one device
which you are playing keeps Bluetooth
connection. You can control the Bluetooth
device with this unit but you cannot use
sound output.
yy When entering the BT (Bluetooth) function,
this unit automatically connects to the last
connected Bluetooth device or the device
which played back last.
(Auto connection may not be supported
depending on the connected device
specifications.)
3
Operating
,,Note
yy When using Bluetooth technology, you have
to make a connection between the unit and
the Bluetooth device as close as possible and
keep the distance.
However, it may not work well in certain
situations as described below:
,,Note
yy The sound may be interrupted when the
connection has interference from other
electronic devices.
26 Operating
Controls connected Bluetooth device
You can control connected Bluetooth device by the
unit; play, pause, stop, skip.
,,Note
yy Only Android OS and iOS is available to use
this function.
yy This function may not be supported
depending on the Bluetooth device, or
operated differently.
Bluetooth connection lock (BT LOCK)
3
Operating
You can limit Bluetooth connection to only
BT (Bluetooth) and LG TV function to prevent
unintended Bluetooth connection.
To turn on this function, press and hold N for about
5 seconds in BT (Bluetooth) function.
“ON-BT LOCK” appears then you can limit Bluetooth
connection.
To turn off this function, press and hold N for about
5 seconds in BT (Bluetooth) function.
“OFF-BT LOCK” appears.
,,Note
Even if you set up Bluetooth connection lock to
On, this unit turns on by Auto Power function.
Turn off Auto Power function to prevent it.
(Page 37)
Operating 27
Using the LG XBOOM
App
,,Note
Install “LG XBOOM” App onto
Your Bluetooth Device
There are two ways to install “LG XBOOM” app onto
your Bluetooth device.
yy Only Android OS is available to use “LG
XBOOM” app with this unit.
Install “LG XBOOM” App through QR
code
yy It is recommended to use the latest version
of app.
1. Install “LG XBOOM” app through QR code. Use
the scanning software to scan the QR code.
About “LG XBOOM” App
“LG XBOOM” app brings a suite of new features to
this unit.
Below introduces you to a feature of “LG XBOOM”
app.
Multi Juke box: Your entertainment increases three
fold when you connect up to 3 Bluetooth phones
at the same time. Play music from three phones and
create a customized playlist from all phones.
Sampler Creator : Record effects on your
smartphone and very simply sync them via
Bluetooth to the system. Be as creative as you can
be.
2. Tap an icon for installation.
,,Note
yy Make sure that your Bluetooth device is
connected to the Internet.
yy Make sure that your Bluetooth device
has a scanning software application. If you
don’t have one, download one from “Google
Android Market (Google Play Store)”.
yy Depending on the area, QR code may not
work.
yy You can find the available application of this
unit by using “LG Audio” app.
-- Android OS: Ver 5.0 (or later)
Operating
To enjoy more features, you are recommended to
download and install free “LG XBOOM” app.
3
28 Operating
Install “LG XBOOM” App through
“Google Android Market (Google Play
Store)”
1. Tap the “Google Android Market (Google Play
Store)” icon.
2. In the search bar, type in the “LG XBOOM” and
search it.
3. In the search result list, find and tap “LG XBOOM”
to start downloading Bluetooth app.
4. Tap an icon for installation.
,,Note
3
yy Make sure that your Bluetooth device is
connected to the Internet.
Operating
yy Make sure that your Bluetooth device is
equipped with “Google Android Market
(Google Play Store)”.
Activate Bluetooth with “LG
XBOOM” App
“LG XBOOM” app helps to connect your Bluetooth
device to this unit.
Tap “LG XBOOM” app icon on the home screen to
open “LG XBOOM” app, and go to the main menu.
,,Note
yy “LG XBOOM” app will be available in the
software version as follow;
-- Android O/S: Ver 5.0 (or later)
yy If you use “LG XBOOM” app for operation,
there would be some differences between
“LG XBOOM” app and the supplied remote
control. Use the supplied remote control as
necessary.
yy Depending on the Bluetooth device, “LG
XBOOM” app may not work.
yy After connection of “LG XBOOM” app, music
may be output from your Bluetooth device. In
this case, try connecting procedure again.
yy If you operate the other applications or
change the settings on your Bluetooth
device while using “LG XBOOM” app, “LG
XBOOM” app may operate abnormally.
yy When “LG XBOOM” app operates abnormally,
check your Bluetooth device and the
connection of “LG XBOOM” app and then try
to connect again.
yy Depending on the smart phone's operating
system, you have some differences for “LG
XBOOM” operation.
yy Check Bluetooth setting on your Bluetooth
device if “LG XBOOM” app connection does
not work well.
Operating 29
Radio Operations
Be sure that FM antenna is connected. (Page 17)
Listening to the radio
1. Press F until FM appears in the display window.
The last received station is tuned in.
2. Auto tuning:
Press and hold TUNING-/+ on the remote
control or C/V on the unit until the frequency
indication starts to change, then release.
Scanning stops when the unit tunes in a station.
3. Adjust the volume by pressing VOL +/- on the
remote control or rotating MASTER VOLUME
knob on the unit repeatedly.
Improving poor FM reception
Press N. This will change the tuner from stereo to
mono and usually improve the reception.
You can preset 50 stations for FM.
Before tuning, make sure to turn down the volume.
1. Press F until FM appears in the display window.
2. Select the desired frequency by pressing
TUNING -/+ on the remote control or C/V
on the unit.
3. Press JUKEBOX/MEMORY on the remote
control. A preset number will blink in the display
window.
4. Press PRESET·FOLDER W/S on the remote
control to select the preset number you want.
5. Press JUKEBOX/MEMORY on the remote
control. The station is stored.
3
6. Repeat steps 2 to 5 to store other stations.
Operating
Or
Manual tuning:
Press TUNING-/+ on the remote control or
C/V on the unit repeatedly.
Presetting the Radio Stations
7. To listen a preset station,
press PRESET·FOLDER W/S or 0 to 9
numerical buttons on the remote control.
Deleting all the saved stations
1. Press DELETE on the remote control.
“DEL ALL” will flash up on the unit display.
2. Press DELETE on the remote control to erase all
the saved radio stations.
“DELETED ALL” will scroll on the display window.
30 Operating
Sound adjustment
Setting the sound mode
This system has a number of pre-set equalizers. The
displayed items for the equalizer may be different
depending on sound sources and effects.
You can select a desired sound mode by using
EQUALIZER on the remote control.
On Display
3
Operating
BASS (BASS BLAST)
or
BASS+ (BASS BLAST+)
POP
CLASSIC
ROCK
JAZZ
Description
Reinforces the bass
and powerful sound.
This program lends
an enthusiastic
atmosphere to the
sound, giving you the
feeling you are at an
actual rock, pop, jazz or
classic concert.
FOOTBALL
You can enjoy the
equalizer FOOTBALL
STADIUM.
STANDARD
You can enjoy
optimized sound.
You can select a desired sound mode by using
SPECIAL EQ on the remote control or SPECIAL EQ /
BASS BLAST (or BASS BLAST+) on the unit.
On Display
FUNK, REGUETON,
SAMBA,
MERENGUE, AXE,
SALSA, SERTANEJ,
FORRO
ARABIC
DANGDUT
Region
Description
Latin
America
Optimized
equalizer
Middle East for the
music genre
preferred in
Indonesia
each region.
AFRO
Africa
INDIA
India
,,Note
yy On some speakers, sound may not be heard
or heard in low sound depending on the
sound mode.
yy By pressing and holding SPECIAL EQ / BASS
BLAST (or BASS BLAST+) on the unit for 3
seconds, you can directly select BASS (BASS
BLAST) or BASS+ (BASS BLAST+) effect.
Setting the USER EQ
You can adjust the sound level of Bass, Middle and
Treble as your preference.
1. Press USER EQ on the unit. “USER EQ” is
displayed.
2. Press USER EQ on the unit repeatedly until
desired setting appears in the display window.
3. Rotate DJ SCRATCHER / LEVEL CONTROL &
SEARCH on the unit to adjust the value.
Operating 31
JUKE BOX Playback
Editing JUKE BOX
JUKE BOX function enables you to make a playlist of
your favorite tracks/files from a disc or USB device.
A playlist of up to 100 tracks/files can be entered.
1. Press and hold JUKEBOX/MEMORY on the
remote control to enter the edit mode.
(Playing will be stopped when you press
JUKEBOX/MEMORY on the remote control.)
Making JUKE BOX list
1. Press and hold JUKEBOX/MEMORY on the
remote control to enter the edit mode.
(Playing will be stopped when you press
JUKEBOX/MEMORY on the remote control.)
2. Select a track/file by pressing C/V on the
remote control.
3. Press JUKEBOX/MEMORY on the remote
control to save the track/file.
5. Press JUKEBOX/MEMORY on the remote
control once again.
To play the JUKE BOX list, press N on the remote
control after you make the list.
,,Note
When making or modifying the JUKE BOX list,
REPEAT mode is off.
Enjoying JUKE BOX
Press JUKEBOX/MEMORY on the remote control
once. “ON - JUKE BOX” appears on the display
window.
To play JUKE BOX list, press N on the remote
control.
To cancel it, press JUKEBOX/MEMORY on the
remote control once.
“OFF - JUKE BOX” appears on the display window.
3. Press C/V on the remote control.
4. Press JUKEBOX/MEMORY on the remote
control.
5. Repeat 2 to 4 to store the other tracks/files.
6. Press JUKEBOX/MEMORY on the remote
control once again.
To play the JUKE BOX list, press N on the remote
control after you edit the list.
Deleting JUKE BOX list
Deleting function works in the edit mode.
1. Press and hold JUKEBOX/MEMORY on the
remote control to enter the edit mode.
Or
Press DELETE on the remote control while JUKE
BOX is played to enter the edit mode.
2. Select a song by pressing PRESET·FOLDER
W/S on the remote control repeatedly.
3. Press DELETE on the remote control while a
song is selected.
,,Note
yy If there is no JUKE BOX list, “NO PROG”
appears on the display window when you
press JUKEBOX/MEMORY on the remote
control.
yy JUKE BOX is switched off in the case below.
-- Changing to a different function.
-- Turning off and on the unit.
-- Operating the numerical buttons on the
remote control.
-- Playing a file by using SEARCH and
DJ SCRATCHER / LEVEL CONTROL &
SEARCH on the unit.
yy JUKE BOX list is cleared in the case below.
-- Removing the disc or the USB device.
-- Deleting music files in the USB device.
3
Operating
4. Repeat steps 2 - 3 to store other tracks/files.
(You can modify the list by pressing
PRESET·FOLDER W/S on the remote control to
select the JUKE BOX program number.)
2. Press PRESET·FOLDER W/S on the remote
control to select a track/file to edit.
32 Operating
Other Operations
DEMO
Turn off the sound temporarily
In the power off state, press DEMO on the unit
once. The unit will power on and display the each of
functions with demo sound in the display window.
To cancel the DEMO function, press DEMO on the
unit once more.
Press [ on the remote control to mute your sound.
3
You can mute your unit, for example, to answer the
telephone, the “MUTE” will appear in the display
window.
Resume stop
To cancel it, press [ on the remote control again or
change the volume level.
The unit records the point where you pressed Z
depending on the disc or USB.
CHILDSAFE Mode
If you press Z twice, the unit will clear the stopped
point.
Operating
This function helps to prevent you from being
surprised when you turn on the unit in case that the
volume of the unit is set at a high level.
To turn on CHILDSAFE mode, press and hold OK on
the unit when the volume of the unit is “MIN”.
In CHILDSAFE mode, the volume increase gradually.
To turn off CHILDSAFE mode, press and hold OK on
the unit when the volume of the unit is “MIN” and
this mode is turned on.
,,Note
In case of CD, USB or BT (Bluetooth) function,
CHILDSAFE mode does not work after about
2 minutes from power on the unit even if this
mode is enabled.
Operating 33
Using Microphone
VOICE CANCELLER
1. Connect your microphone to the MIC jack.
You can reduce the vocal tones during music
playback from various input sources.
2. Play the music you want.
3. Sing along with the accompaniment.
Adjust the microphone volume by pressing MIC
VOL +/- on the unit.
,,Note
yy When not using the microphone, set the MIC
volume to minimum or turn off the MIC and
remove the microphone from the MIC jack.
yy If sound through the microphone is extremely
loud, it may be distorted.
In this case, pressing MIC VOL - on the unit.
yy You can give an echo effect to the sound
from the microphones by pressing MIC
ECHO.
To cancel it, press VOICE CANCELLER again.
The quality of the VOICE CANCELLER may be
different depending on the recording conditions of
music files.
,,Note
yy This function is available in the CD, USB or BT
(Bluetooth) function.
yy If the function is not available, “NOT
SUPPORT” appears in the display window.
yy This function is available to use only when a
microphone is connected.
yy If a microphone is not connected, “INSERT
MIC” appears in the display window.
yy It is not available on the mono source.
yy To initialize it, change the function or
disconnect the microphone.
yy This function may not be initialized depending
on the status of connected devices.
3
Operating
yy If the microphone is set too near the speaker,
a howling sound may be produced.
In this case, move the microphone away from
the speaker or decrease the sound level by
using the MIC VOL - on the unit.
Press VOICE CANCELLER and “ON - VOICE
CANCELLER” will appear in display window.
34 Operating
KEY CHANGER
VOCAL EFFECTS
You can adjust the key to 9 steps (4 steps higher, 4
steps lower and the original key).
When you connect your microphone to the MIC jack,
you can enjoy karaoke function by changing voice in
the various source.
yy To make key more sharp, one by one,
press the KEY CHANGER(L) repeatedly during
playback.
yy To make the key more flatten, one by one,
press the KEY CHANGER(l) repeatedly during
playback.
,,Note
yy This function is available in the CD, USB or BT
(Bluetooth) function.
3
yy To initialize it, change the function, disconnect
the microphone or change the music.
Operating
yy This function may not be initialized depending
on the status of connected devices.
To select various vocal effects mode, pressing VOCAL
EFFECTS repeatedly or pressing VOCAL EFFECTS
and then turning MASTER VOLUME on the unit
when vocal effects mode appears in the display
window.
BASS SOPRANO HELIUM ROBOT
DUET MAN DUET WOMAN BASS ECHO1
SOPRANO ECHO1 HELIUM ECHO1
ROBOT ECHO1 DUET MAN1 DUET
WOMAN1 BASS ECHO2 SOPRANO
ECHO2 HELIUM ECHO2 ROBOT ECHO2
DUET MAN2 DUET WOMAN2 OFF
,,Note
yy If the function is not available, “NOT
SUPPORT” appears in the display window.
yy If a microphone is not connected, “INSERT
MIC” appears in the display window.
yy If a microphone is not connected, “INSERT
MIC” appears in the display window.
yy If you press KEY CHANGER or MIC ECHO
on VOCAL EFFECTS mode, after backing up
current VOCAL EFFECTS, turn off VOCAL
EFFECTS mode and operate KEY CHANGER
or ECHO mode.
yy To turn off VOCAL EFFECTS mode, press and
hold VOCAL EFFECTS.
Operating 35
ECHO
LIGHTING
When you connect your microphone to the MIC jack,
you can give an echo effect to the sound from the
microphones by pressing MIC ECHO.
This function offers a party atmosphere by operating
the lighting on the unit.
ECHO 1
ECHO 2
,,Note
OFF
yy If a microphone is not connected, “INSERT
MIC” appears in the display window.
yy If you press VOCAL EFFECTS on ECHO
mode, after backing up current ECHO,
turn off ECHO mode and operate VOCAL
EFFECTS mode.
To operate ECHO mode, press MIC ECHO
again, after backing up current VOCAL
EFFECTS.
Press LIGHTING on the unit repeatedly or press
LIGHTING on the unit and then turn MASTER
VOLUME on the unit.
PARTY
OFF
WATER
FOREST
(MY STYLE)
,,Note
yy Lighting function is available in all functions.
yy Lighting mode retains in its previous mode
when you first press LIGHTING on the unit,
press again to change modes.
yy Do not look directly at the light emitting part
when the LIGHTING is turned on.
yy If the illumination brightness is glaring, switch
on the room lights or turn off the LIGHTING
of the unit.
yy You can also turn off the light by pressing
and holding LIGHTING on the unit.
3
Operating
yy If you want to use MY STYLE, you have to
register a source with “LG XBOOM” app.
36 Operating
Sleep Timer Setting
Dimmer
Press SLEEP on the remote control repeatedly to
select delay time between 10 and 180 minutes.
After the delay time, the unit will be turned off.
Press SLEEP on the remote control once.
The display window will be darkened by half.
To cancel the sleep function, press SLEEP on the
remote control repeatedly until “OFF” appears.
,,Note
yy You can check the remaining time before the
unit is turned off. Press SLEEP on the remote
control to check or change the remaining
time.
3
yy You can edit the remain time when the
remaining time or “DIMMER” is displayed.
To cancel it, press SLEEP on the remote control
repeatedly until “OFF” appears.
,,Note
All the lighting turns off when dimmer is being
operated.
Auto power down
Operating
This unit will turn itself off to save electricity in the
case were the main unit is not connected to an
external device and is not used for 15 minutes.
The unit will also turns itself off after six hours if
the main unit has been connected to another device
using the analog inputs.
Auto power down function is applied to only MAIN
unit in case of WIRELESS PARTY LINK connection.
In case of OTHER unit, Auto power down is available
after disconnection OTHER unit and MAIN unit.
How to disconnect the wireless
network connection or the wireless
device.
Turn off the unit by pressing the power button for
more than 5 seconds.
Operating 37
AUTO POWER On
Auto function change
This unit automatically turns on by an input source:
Bluetooth or LG TV.
This unit recognizes input signals such as
BT (Bluetooth), LG TV and AUX 1 and then
automatically changes to the suitable function.
When you turn on your TV connected to this unit,
this unit recognizes the input signal and selects the
suitable function. You can hear the sound from the
unit.
When you try to connect Bluetooth
device
If you try to connect your Bluetooth device, this unit
turns on and connects your Bluetooth device.
You can play your music.
When you try to connect your Bluetooth device to
this unit, BT(Bluetooth) function is selected.
Play your music on the Bluetooth device.
When you turn off this unit by pressing 1 on the
unit for 5 seconds each time, you can turn on or off
the AUTO POWER function.
When AUX IN 1 (3.5 mm stereo cable)
is connected
On Display
Description
AUTO POWER function is
turned on.
OFF - AUTO POWER
AUTO POWER function is
turned off.
,,Note
yy Depending on the connected device, this
function may not operate.
yy Depending on the connected device, the unit
turns on but BT(Bluetooth) function may not
be connected.
yy If you disconnect Bluetooth connection by
this unit, some Bluetooth devices try to
connect to the unit continually. Therefore it is
recommended to disconnect the connection
before turning off the unit.
yy If you try to connect to the “LG XBOOM”
app, BT(Bluetooth) function of this unit is
turned on.
yy If you turn on the unit using LG TV or
BT(Bluetooth) function, proper function of
this unit is turned on.
yy If you have already paired with this unit, this
unit can automatically turn on by an input
source when this unit is turned off.
When LG TV is connected
When you turn on your LG TV connected by LG
Sound Sync, this unit changes the function to LG TV.
You can hear the sound from your TV.
,,Note
yy This function is not available during recording
or deleting.
yy This function only works with devices that
were previously connected.
yy If the Bluetooth connection lock function is
set, Bluetooth and LG TV connection will be
only available on BT(Bluetooth) and LG TV
function. (Page 26)
3
Operating
ON - AUTO POWER
When you connect the portable device to the
AUX IN 1 connector, AUX 1 function is selected.
Play your music on the portable device.
38 Operating
Setting the Clock
Using your player as an alarm
clock
1. Turn the unit on.
1. Turn the unit on.
2. Press and hold CLOCK on the remote control.
2. Press and hold ALARM on the remote control.
3. Select time mode by pressing C/V on the
remote control.
3. Press C/V on the remote control to change
the hours and minutes and press SET on the
remote control to save.
- AM 12:00 (for an AM and PM display) or 0:00
(for a 24 hour display)
4. Press SET on the remote control to confirm your
selection.
5. Select the hours by pressing C/V on the
remote control.
3
6. Press SET on the remote control.
Operating
7. Select the minutes by pressing C/V on the
remote control.
8. Press SET on the remote control.
Setting the Clock through “LG
XBOOM” App
Install “LG XBOOM” app on your Android device.
(Page 27-28)
Your unit’s clock will be automatically synchronized
with your device by activating Bluetooth connection
through “LG XBOOM” app.
4. Press C/V on the remote control to select
function and press SET on the remote control to
save.
-Press C/V on the remote control to select a
preset number when you select tuner and then,
press SET on the remote control.
If there is no preset number, this step is skipped.
5. Press C/V on the remote control to change
the volume and press SET on the remote control
to save.
,,Note
yy If you set the clock time, you can check the
time by pressing CLOCK on the remote
control even when the player is turned off.
yy You can set alarm after you set the clock
time.
yy If you set the clock time and alarm, you
can check the alarm setting information by
pressing ALARM on the remote control even
when the unit is turned off.
yy You can select ALARM ON/OFF mode by
pressing ALARM on the remote control.
Operating 39
LG Sound Sync
You can control some functions of this unit by
your TV’s remote control with LG Sound Sync. It is
compatible with LG TV that supports LG Sound Sync.
Make sure your TV has the LG Sound Sync logo.
Controllable function by LG TV’s remote control:
Volume up/down, mute.
,,Note
yy You can also use the remote control of
this unit while using LG Sound Sync. If you
use TV’s remote control again, the unit
synchronizes with the TV.
(According to TV Specifications, the volume
and mute of this unit synchronize with TV.)
yy If the connection fails, check the conditions of
this unit and your TV: power, function.
yy Make sure of the condition of this unit and
the connection in the cases below when
using LG Sound Sync.
-- The unit is turned off.
1. Turn on the unit by pressing 1.
-- Disconnecting the wireless connection
caused by interference or a distance.
2. Press F until LG TV function is selected.
3. Set up the sound output of TV to listen to the
sound through this unit:
TV setting menu [Sound] [TV Sound output]
[LG Sound Sync (Wireless)]
“PAIRED” appears on the display window for
about 3 seconds and then you can see “LG TV”
on the display window if the TV and this unit are
connected normally.
-- Changing to a different function.
yy The amount of time to turn off this unit is
different depending on your TV.
yy If you try to change the function on using
the LG TV function, volume will be changed
according to the LG TV volume level.
yy Details of TV setting menu vary depending on
models of your TV.
yy If you turned off the unit directly by pressing
1, LG Sound Sync will be disconnected.
To use this function again, you should
reconnect the TV and the unit.
yy The volume may be increased when the TV
and this unit is connected by LG Sound Sync.
Decrease the TV volume and then connect
with this unit.
yy When you turn on your LG TV connected
by LG Sound Sync or enter LG TV function,
this unit changes the function to LG TV
automatically.
yy You should set the TV Sound output manually
depending on the TV version.
yy If you control TV volume when this unit and
TV are connected by LG Sound Sync, this unit
may louder the volume due to synchronizing
volume with TV’s.
3
Operating
Refer to the TV’s instruction manual for the details of
LG Sound Sync.
40 Operating
WIRELESS PARTY LINK
Connection
You can enjoy the sound by using two speakers.
For enjoying WIRELESS PARTY LINK, you need to
purchase another speaker.
It is compatible with unit that supports WIRELESS
PARTY LINK.
3
,,Note
yy If you are using the LG Sound Sync, this
function is not available. If you connect the LG
TV function, “NOT SUPPORT” appears in the
display window.
Operating
yy You can use microphone in the OTHER unit
only. In case of OTHER unit, some functions
are supported only.
yy When WIRELESS PARTY LINK is
disconnected, OTHER unit is changed to BT
(Bluetooth) function.
yy If the connection is failed, “FAILED” appears in
the display window.
yy Mute function is synchronized with each
other.
yy WIRELESS PARTY LINK connection will be
disconnected when you turn off the unit or
press 3 TWIN on the unit.
yy Sound of MAIN unit and OTHER unit may be
different depending on playback status or
source.
1. Press 3 TWIN on the unit.
ROLE SELECT appears in the display window.
2. Press 3 TWIN on the unit to select MAIN or
OTHER.
- unit: Selects MAIN.
-
unit: Selects OTHER.
Two units try to connect with each other.
3. When these units are successfully connected
to each other, each of connected device names
appears in the each unit.
yy Check the following information when
connecting to Bluetooth.
-- You can connect only one Bluetooth device
in the MAIN unit. You cannot connect
Bluetooth device to the OTHER unit.
-- WIRELESS PARTY LINK connection is only
supported on Android devices. (WIRELESS
PARTY LINK connection may not be
supported depending on the connected
device specifications or OS.)
-- Removable/detachable Bluetooth devices
(ex. Dongle etc.) will not support WIRELESS
PARTY LINK connection.
-- When WIRELESS PARTY LINK is connected,
Bluetooth connection is not available in
status of recording or deleting.
-- If you connect WIRELESS PARTY LINK
while you are playing connected Bluetooth
device, it may be reconnected again,
depending on phone specification.
Troubleshooting 41
Troubleshooting
General
Problem
Cause & Solution
yy Turn off the power of this unit and the connected external device (TV, Woofer,
DVD-player, Amplifier, etc.) and turn them on again.
The unit does not work
properly
yy Disconnect the power cord of this unit and the connected external device (TV,
Woofer, DVD-player, Amplifier, etc.) and then try connecting again.
yy Previous setting may not be saved when device power is shut off.
yy The power cord is not plugged in. Plug in the power cord.
No Power
No sound
yy Check whether electricity failed.
Check the condition by operating other electronic devices using the same AC
outlet.
yy Check whether you select right function.
Press function button and check if you have selected the right function.
yy An unplayable disc is inserted. Check the playable disc.
The unit does not start
playback
yy No disc is inserted. Insert a disc.
yy The disc is dirty. Clean the disc. (Page 45)
yy The disc is inserted upside down.
Place the disc with the label or printed side facing upwards.
yy The antenna is positioned or connected poorly.
Connect the antenna securely.
Radio stations cannot be
tuned in properly
yy The signal strength of the radio station is too weak.
Tune to the station manually.
yy No stations have been preset or preset stations have been cleared (when tuning
by scanning preset channels).
Preset some radio stations, see page 29 for details.
4
Troubleshooting
yy Check to see if the speakers are connected correctly.
Speaker cables connected correctly.
42 Troubleshooting
Problem
Cause & Solution
yy The remote control is too far from the unit.
Operate the remote control within about 7 m.
The remote control does yy There is an obstacle in the path of the remote control and the unit.
Remove the obstacle.
not work properly
yy The batteries in the remote control are exhausted.
Replace the batteries with new ones.
yy Check whether the speaker light cables are connected to the unit correctly.
Connect the speaker light cables to the unit correctly.
No speaker light
yy Check the speaker light effects by pressing LIGHTING on the unit. (Page 35)
yy Check whether your LG TV supports LG Sound Sync.
4
LG Sound Sync does not
work
yy Check connection of LG Sound Sync.
The AUTO POWER
function does not work
yy Check connection of the external device such as TV or Bluetooth device.
yy Check sound setting of your TV and this unit.
yy Depending on the connected device, this function may not operate.
Troubleshooting
NOTES to release Demo mode
Problem
Can not change input source with ‘F’ key such as
BT(Bluetooth), USB etc. and only DEMO mode is
showing in the display.
Remote Control does not work properly.
Cause & Solution
yy Press ‘DEMO’ Key on the unit for 15 seconds.
Appendix 43
General specifications
General
Power requirements
Refer to the main label on the unit.
Power consumption
Dimensions (W x H x D)
Operating temperature
Operating humidity
Refer to the main label on the unit.
Approx. 450.0 mm x 167.0 mm x 332.0 mm
5 °C to 35 °C
5 % to 60 % RH
Inputs
Analog audio in (AUX IN 2)
3.5 Vrms, RCA jack (L, R)
Portable in (AUX IN 1)
1.8 Vrms (3.5 mm stereo jack)
Microphone (MIC 1/2)
Sensitivity 20 mV, 6.3 mm jack x 2
Tuner
FM Tuning Range
87.5 to 108.0 MHz or 87.50 to 108.00 MHz
System
80 to 20,000 Hz
More than 75 dB
More than 80 dB
5 V 0 500 mA
Amplifier (RMS Output power)
Total output
HIGH
MID
LOW
3,500 W RMS
590 W RMS X 2 (6 Ω at 5 KHz, 30 % THD)
590 W RMS X 2 (6 Ω at 1 KHz, 30 % THD)
570 W RMS X 2 (6 Ω at 70 Hz, 30 % THD)
yy Design and specifications are subject to change without notice.
5
Appendix
Frequency Response
Signal-to-noise ratio
Dynamic range
Bus Power Supply (USB)
44 Troubleshooting
Speakers specifications
Front speaker
HIGH : 2 Way 2 Speaker
Type
MID : 1 Way 1 Speaker
LOW : 1 Way 1 Speaker
HIGH : 6 Ω
Impedance
MID : 6 Ω
LOW : 6 Ω
HIGH : 590 W RMS
Rated Input Power
MID : 590 W RMS
LOW : 570 W RMS
HIGH : 1,180 W RMS
4
Max. Input power
MID : 1,180 W RMS
Dimensions (W x H x D)
LOW : 1,140 W RMS
Approx. 460.0 mm x 698.0 mm x 394.0 mm
Troubleshooting
yy Design and specifications are subject to change without notice.
Trademarks and Licenses
The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use
of such marks by LG Electronics is under license.
Other trademarks and trade names are those of their respective owners.
Appendix 45
Maintenance
Handling the Unit
When shipping the unit
Notes on Discs
Handling Discs
Never stick paper or tape on the disc.
Storing Discs
Please save the original shipping carton and packing
materials. If you need to ship the unit, for maximum
protection, re-pack the unit as it was originally
packed at the factory.
Keeping the exterior surfaces clean
After playing, store the disc in its case. Do not
expose the disc to direct sunlight or sources of heat
and never leave it in a parked car exposed to direct
sunlight.
Do not use volatile liquids such as insecticide spray
near the unit. Wiping with strong pressure may
damage the surface. Do not leave rubber or plastic
products in contact with the unit for a long period
of time.
Cleaning Discs
Cleaning the unit
Fingerprints and dust on the disc can cause poor
picture quality and sound distortion. Before playing,
clean the disc with a clean cloth. Wipe the disc from
the center to out.
To clean the player, use a soft, dry cloth. If the
surfaces are extremely dirty, use a soft cloth lightly
moistened with a mild detergent solution. Do not use
strong solvents such as alcohol, benzine, or thinner,
as these might damage the surface of the unit.
Do not use strong solvents such as alcohol, benzine,
thinner, commercially available cleaners, or anti-static
spray intended for old vinyl records.
Maintaining the Unit
5
Appendix
The unit is a high-tech, precision device.
If the optical pick-up lens and disc drive parts are
dirty or worn, the picture quality could be diminished.
For details, please contact your nearest authorized
service center.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising