LG | OL90DK | User manual | LG OL90DK Руководство пользователя

LG OL90DK Руководство пользователя
OWNER’S MANUAL
Mini Hi-Fi
Audio
Please read this manual carefully before operating your set and retain it for future
reference.
MODEL
OL90DK
MFL71433704
1905_Rev01
www.lg.com
Copyright © 2019 LG Electronics Inc. All Rights Reserved.
2
Getting Started
Safety Information
1
CAUTION
Getting Started
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK DO NOT REMOVE COVER (OR BACK)
NO USER-SERVICEABLE PARTS INSIDE REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
This lightning flash with arrowhead
symbol within an equilateral
triangle is intended to alert the
user to the presence of uninsulated
dangerous voltage within the
product’s enclosure that may be of
sufficient magnitude to constitute
a risk of electric shock to persons.
The exclamation point within an
equilateral triangle is intended
to alert the user to the presence
of important operating and
maintenance (servicing)
instructions in the literature
accompanying the product.
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN
OR MOISTURE.
CAUTION: The apparatus should not be exposed to
water (dripping or splashing) and no objects filled
with liquids, such as vases, should be placed on the
apparatus.
WARNING: Do not install this equipment in a
confined space such as a book case or similar unit.
CAUTION: Do not use high voltage products around
this product. (ex. Electrical swatter) This product may
malfunction due to electrical shock.
CAUTION: No naked flame sources, such as lighted
candles, should be placed on the apparatus.
CAUTION: This product employs a Laser System.
To ensure proper use of this product, please read
this owner’s manual carefully and retain it for future
reference. Shall the unit require maintenance, contact
an authorized service center.
Use of controls, adjustments or the performance of
procedures other than those specified herein may
result in hazardous radiation exposure. To prevent
direct exposure to laser beam, do not try to open the
enclosure.
CAUTION: Do not block any ventilation openings.
Install in accordance with the manufacturer’s
instructions.
Slots and openings in the cabinet are provided
for ventilation and to ensure reliable operation of
the product and to protect it from over heating.
The openings shall never be blocked by placing
the product on a bed, sofa, rug or other similar
surface. This product should not be placed in a
built-in installation such as a bookcase or rack unless
proper ventilation is provided or the manufacturer’s
instruction has been adhered to.
NOTICE: For safety marking information including
product identification and supply ratings, please refer
to the main label on the bottom or the other surface
of the product.
Getting Started
CAUTION concerning the Power Cord
Check the specification page of this owner’s manual
to be certain of the current requirements.
Do not overload wall outlets. Overloaded wall outlets,
loose or damaged wall outlets, extension cords,
frayed power cords, or damaged or cracked wire
insulation are dangerous. Any of these conditions
could result in electric shock or fire. Periodically
examine the cord of your device, and if its appearance
indicates damage or deterioration, unplug it,
discontinue use of the device, and have the cord
replaced with an exact replacement part by an
authorized service center. Protect the power cord
from physical or mechanical abuse, such as being
twisted, kinked, pinched, closed in a door, or walked
upon. Pay particular attention to plugs, wall outlets,
and the point where the cord exits the device.
CAUTION: Be careful to make sure children do not
put their hands or any objects into the *speaker duct
* speaker duct: A hole for plentiful bass sound on
speaker cabinet. (enclosure)
Symbols
~
Refers to alternating current (AC).
0
Refers to direct current (DC).
1
Refers to class II equipment.
Getting Started
The Power Plug is the disconnecting device. In case
of an emergency, the Power Plug must remain readily
accessible.
3
1
Refers to stand-by.
!
Refers to “ON” (power).
Refers to dangerous voltage.
4
Table of Contents
Table of Contents
1
Getting Started
3
System Setting
2
6
7
7
7
7
7
8
8
8
9
9
9
10
12
14
15
Safety Information
Unique Features
Introduction
– Playable Discs
– About the “7” Symbol Display
– Symbols Used in this Manual
– Regional Codes
Playable file Requirement
– Music file requirement
– Photo file requirement
– Video file requirement
– Compatible USB Devices
– USB device requirement
Remote control
Top panel
Front panel / Rear panel
Carrying the unit
23
23
23
24
24
25
26
Adjust the setup settings
– OSD Initial language settings - Optional
– To display and exit the Setup menu
– Language
– Display
– Audio
– Lock (Parental Control)
4
Operating
27
28
29
29
2
Connecting
16
16
17
18
18
18
19
20
20
22
22
Connections to Your TV
– HDMI Out Connection
– Resolution Setting
AC Power Cord Connection
Optional Equipment Connection
– AUX IN 1 Connection
– AUX IN 2 Connection
– OPTICAL IN Connection
LG Sound Sync
– USB Connection
– Antenna Connection
Using the Home Menu
Basic Operations on Disc
Advanced Operations on Disc
– Displaying Disc Information
on-screen
– To display the DVD Menu
– To display the DVD title
– 1.5 times speed playback
– Screen Saver
– Starting play from selected time
– Resume playback
– Changing subtitle code page
– Marked Playback
– Viewing a PHOTO file
Basic Operations on USB
– Selecting a folder and
an MP3/WMA file
– Deleting a file/folder or format
Advanced Operations on USB
– JUKE BOX Playback
Playback Effect
– DJ EFFECT
– DJ SCRATCHER
– AUTO DJ
– DJ PAD
– DJ LOOP
– PARTY ACCELERATOR
– PARTY KICK STARTER
Using BLUETOOTH® wireless technology
– Listening to music stored on the Bluetooth
devices
29
29
29
29
30
30
30
31
32
33
34
35
36
36
37
37
37
37
38
38
38
39
40
40
Table of Contents
43
43
43
44
45
45
45
45
45
46
46
46
47
47
47
47
47
48
48
48
48
48
51
51
51
52
52
53
53
53
54
55
Using the LG XBOOM App
– About “LG XBOOM” App
– Install “LG XBOOM” App onto Your
Bluetooth Device
– Activate Bluetooth with “LG XBOOM” App
Radio Operations
– Listening to the radio
– Improving poor FM reception
– Presetting the Radio Stations
– Deleting all the saved stations
Sound adjustment
– Setting the sound mode
– Setting the USER EQ
Other Operations
– Turn off the sound temporarily
– DEMO
– Resume stop
– Using your TV remote control
– CHILDSAFE Mode
– Last Scene Memory
– Power Resume - Optional
– System Select - Optional
– Using Microphone
– LIGHTING
– Sleep Timer Setting
– Dimmer
– Auto power down
– AUTO POWER On
– Auto function change
Setting the Clock
– Setting the Clock through “LG XBOOM” App
– Using your player as an alarm clock
WIRELESS PARTY LINK Connection
5
Troubleshooting
57
57
58
Troubleshooting
– General
– NOTES to release Demo mode
6
Appendix
59
Controlling a TV with the Supplied Remote
Control
– Setting up the remote to control your TV
Area Code List
Language code List
Trademarks and Licenses
Maintenance
– Notes on Discs
– Handling the Unit
General specifications
59
60
61
62
63
63
63
64
5
1
2
3
4
5
6
6
Getting Started
Unique Features
1
BLUETOOTH®
Getting Started
Listens to music stored on your Bluetooth device.
Playback effects
Listens to music with various sound and playback
effects.
LG XBOOM
LG XBOOM is an app designed to let you take control
of some of LG’s latest audio devices. (Page 43
-44)
LG Sound Sync
Controls volume level of this unit by the remote
control of your LG TV that is compatible with LG
Sound Sync.
Full HD up-scaling
Views Full HD picture quality with simple setup.
Getting Started
Introduction
Playable Discs
Symbols Used in this Manual
r
DVD-Video, DVD±R/RW in Video
mode or VR mode and finalized
t
Audio CDs
y
u
Video files contained in the Disc
i
Photo files contained in the Disc
Audio files contained in the Disc
DVD-VIDEO (8 cm/12 cm disc)
Discs such as movies that can be
purchased or rented.
DVD±R (8 cm/12 cm disc)
Video mode and finalized only.
DVD-RW (8 cm/12 cm disc)
Video mode and finalized only.
DVD+R: Video mode only
Supports the double layer disc also.
DVD+RW (8 cm/12 cm disc)
Video mode and finalized only.
Audio CD: Music CDs or CD-R/CDRW in music CD format that can be
purchased.
About the “7” Symbol Display
“7” may appear on your TV display during operation
and indicates that the function explained in this
owner’s manual is not available on that specific
media.
,,Note
Indicates special notes and operating features.
>>Caution
Indicates cautions for preventing possible damages
from abuse.
Regional Codes
This unit has a regional code printed on the rear of
the unit. This unit can play only DVD discs labeled
same as the rear of the unit or “ALL”.
yy Most DVD discs have a globe with one or more
numbers in it clearly visible on the cover. This
number must match your unit’s regional code or
the disc cannot play.
yy If you try to play a DVD with a different regional
code from your unit, the message “Check Regional
Code” appears on the TV screen.
1
Getting Started
This unit plays DVD±R/RW and CD-R/RW that
contains audio titles, MP3, WMA and/or JPEG files.
Some DVD±RW/DVD±R or CD-RW/CD-R cannot be
played on this unit due to the recording quality or
physical condition of the disc, or the characteristics of
the recording device and authoring software.
7
8
Getting Started
Playable file
Requirement
1
Photo file requirement
Photo file compatibility with this unit is limited as
follows:
yy Max pixel in width: 2760 x 2048 pixel
Getting Started
Music file requirement
yy Maximum files: Under 999
MP3/WMA file compatibility with this unit is limited
as follows.
yy Some discs may not operate due to a different
recording format or the condition of disc.
yy Sampling frequency: within 32 to 48 kHz (MP3),
within 32 to 48 kHz (WMA)
yy CD-ROM file format: ISO9660/ JOLIET
yy Bit rate: within 32 to 320 kbps (MP3),
40 to 192 kbps (WMA)
yy Support Version: v2, v7, v8, v9
yy Maximum files: Disc: 999 / USB: 2,000
yy Maximum folders: Disc: 99 / USB: 200
yy File extensions: “.mp3”/ “.wma”
yy Certain MP3/WMA files may not be played
depending on the type or format of the file.
yy CD-ROM file format: ISO 9660/ JOLIET
yy We recommend that you use Easy-CD Creator,
which creates an ISO 9660 file system.
yy The DTS disc is not supported.
You have to set the disc format option to [Mastered]
in order to make the discs compatible with the LG
players when formatting rewritable discs. When
setting the option to Live File System, you cannot use
it on LG players.
(Mastered/Live File System: Disc format system for
Windows Vista)
yy File extensions: “.jpg”
Getting Started
Video file requirement
Video file compatibility with this unit is limited as
follows:
yy The file name of the Video subtitle should be
entered within 45 characters.
yy If there is impossible code to express in the Video
file, it may be displayed as “ _ “ mark on the display.
yy Frame rate: less than 30 fps.
yy If the video and audio structure of recorded files is
not interleaved, either video or audio is outputted.
yy Playable Video file: “.avi”, “.mpg”, “.mpeg”
yy Playable Subtitle format: SubRip (*.srt/ *.txt),
SAMI (*.smi), SubStation Alpha (*.ssa/ *.txt),
MicroDVD (*.sub/ *.txt), SubViewer 2.0 (*.sub/
*.txt), Vobsub (*.sub)
Compatible USB Devices
yy MP3 Player: Flash type MP3 player.
yy USB Flash Drive:
Devices that support USB2.0 or USB1.1.
yy The USB function of this unit does not support all
USB devices.
USB device requirement
yy Devices which require additional program
installation when you have connected it to a
computer, are not supported.
yy Do not extract the USB device while in operation.
yy For a large capacity USB, it may take longer than a
few minute to be searched.
yy To prevent data loss, back up all data.
yy If you use a USB extension cable or USB hub, the
USB device is not recognized.
yy Playable Codec format:
“Xvid”, “MPEG-1”, “MPEG-2”
yy Using NTFS file system is not supported. (Only
FAT(16/ 32) file system is supported.)
yy Playable Audio format: “AC3”, “PCM”, “MP3”,
“WMA”,
yy This unit recognizes up to 2,000 files.
yy Sampling frequency: within 32 to 48 kHz (MP3),
within 32 to 48 kHz (WMA)
yy Bit rate: within 32 to 320 kbps (MP3),
40 to 192 kbps (WMA)
yy For Discs formatted in Live file system, you can
not it on this unit.
yy If the name of movie file is different from that of
the subtitle file, during playback of a Video file,
subtitle may not be display.
yy If you play a Xvid file differ from Xvid spec, it may
not operate normally.
If you play GMC video file which is more than 1-warp
point, video playback screen will not smooth
yy External HDD, Card readers, Locked devices, or
hard type USB devices are not supported.
yy USB port of the unit cannot be connected to PC.
The unit cannot be used as a storage device.
yy Some USB may not work with this unit.
1
Getting Started
yy Available resolution: within 720 x 576 (W x H)
pixels.
9
10 Getting Started
Remote control
• • • • • • • • • • • • • • a• • • • • • • • • • • • • •
1 (Standby): Turns the power on or off.
F (Function): Selects the function and input source.
1
Getting Started
Input source / Function
Disc
USB
Optical
LG Sound Sync (Optical)
AUX (3.5 mm) input
AUX input
Bluetooth
LG Sound Sync (Wireless)
Radio
Display
DVD/CD
USB 1/ 2
OPTICAL
LG OPT
AUX 1
AUX 2
BT
LG TV
FM
B (Open/Close): Opens and closes the disc tray.
0-9 numerical buttons: Selects numbered options in
a menu.
AUTO DJ: Selects the AUTO DJ mode. (Page 37)
h REPEAT: Listens to your files/tracks/chapters
repeatedly or randomly.
• • • • • • • • • • • • • • b• • • • • • • • • • • • • •
C/V (Skip): Skips backward or forward.
c/v (Scan): Scans for a section within a track/
file/chapter.
Z (Stop):
-- Stops playback.
-- Cancels DELETE function.
X (Play):
-- Starts playback.
-- Selects stereo/mono.
M (Pause): Pauses playback.
SPECIAL EQ: Chooses special equalizer.
VOL (Volume) +/-: Adjusts speaker volume.
Replacement of battery
(R03
)
(R03)
MARKER/JUKEBOX:
-- Marks play list. (Page 31)
-- Selects JUKE BOX mode. (Page 36)
-- Makes JUKE BOX list.
EQUALIZER: Chooses sound impressions.
[ (Mute): Mutes the sound.
Remove the battery cover on the rear of the remote
control, and insert the battery with 4 and 5
matched correctly.
Getting Started
11
• • • • • • • • • • • • • • c• • • • • • • • • • • • • •
• • • • • • • • • • • • • • d• • • • • • • • • • • • • •
! (Home): Displays the [Home Menu] on a DVD/
CD function.
CLOCK: Sets a clock and checks a time.
DISC MENU: Accesses the menu on a DVD disc.
W/S/A/D (up/ down/ left/ right): Used to
navigate on-screen displays.
PRESET/FOLDER +/-:
-- Chooses a preset number for a radio station.
(Page 45)
-- Searches for a folder of MP3/WMA files. When a
USB containing MP3/WMA files in several folders
is being played, press PRESET/FOLDER +/- to
select the folder you want to play.
TUNING +/-: Tunes in the desired radio station.
m (Select):
-- Acknowledges menu selection.
-- Presetting the radio stations.
] (Close): Moves backwards in the menu or exits
the setup menu.
m INFO/DISPLAY
-- Accesses On-Screen Display.
-- Sees information about your music (USB). An
MP3 file often come with ID3 tag. The tag gives
the Title, Artist, Album or Time information.
-- Sees optical source information in OPTICAL mode.
-- Sees Bluetooth device name of the unit in
BT READY.
-- Sees the name of connected all Bluetooth device
in Bluetooth mode.
-- When these units are successfully connected each
other in WIRELESS PARTY LINK mode, each of
connected device names appears in the each unit.
CLEAR/DELETE:
-- Removes a number when setting the password.
-- Deletes MP3/WMA files. (USB only). (Page 35)
-- Deletes a song on the JUKE BOX list.
-- Deletes all the saved stations.
SET: Confirms the setting.
?: This button is not available.
VOCAL EFFECTS: Selects various vocal effects
mode.
SLEEP: Sets the system to turn off automatically at
a specified time.
(Dimmer: The display window will be darkened by
half.)
?: This button is not available.
MIC ECHO: Selects ECHO mode.
VOICE CANCELLER: You can reduce the vocal tones
during music playback from various input sources.
?: This button is not available.
MIC VOL -/+ (Microphone Volume): Adjusts
microphone volume.
KEY CHANGER (L/l): Changes the key to suit
your vocal range.
TV Control buttons: Controls the TV. (page 59)
You can control the TV on or off and input source.
.
1
Getting Started
TITLE: If the current DVD title has a menu, the title
menu appears on the screen. Otherwise, the disc
menu may not appear.
ALARM: With the ALARM function you can turn on
Discs, USB play and tuner reception at a desired time.
12 Getting Started
Top panel
a
1
b
c
d
e f
g
h
Getting Started
r
i
q
j
p
k
o
n
a 1 (Standby)
Turns the power on or off.
b DEMO
In power off status, if you press DEMO, show
demo mode.
c USB Port
You can play sound files by connecting the USB
device.
d Display window
e PARTY ACCELERATOR lever
Slide the lever to create a party atmosphere.
m
l
f USB 2 Port
You can play sound files by connecting the USB
device.
g F (Function)
Selects the function and input source.
Input source / Function
Disc
USB
Optical
LG Sound Sync (Optical)
AUX (3.5 mm) input
AUX input
Bluetooth
LG Sound Sync (Wireless)
Radio
Display
DVD/CD
USB 1 / 2
OPTICAL
LG OPT
AUX 1
AUX 2
BT
LG TV
FM
Getting Started
h 3TWIN
Connects two speakers for TWIN mode in
WIRELESS PARTY LINK.
i MASTER VOL. (Volume) -/+
Adjusts speaker volume.
N (Play/Pause)
- Starts or pauses playback.
- Selects stereo/mono.
Z (Stop)
Stops playback or cancels DELETE function.
B (Open/Close)
Opens and closes the disc tray.
k DJ SCRATCHER / SEARCH & MULTI
- Turns clockwise or counterclockwise to make
scratch sound.
- Searches a folder or a file (USB only).
l SPECIAL EQ / BASS BLAST (or BASS BLAST+)
- Chooses special equalizer.
- Press and hold to select BASS (or BASS+)
effect directly.
SEARCH
Moves to folder or file in selection mode
(USB only).
OK
Selects a folder when searching a file.
m PARTY STARTER
- In power off state, this function turns on the
unit with Party Kick Starter sound.
- In power on state, this function mixes the music
with Party Kick Starter sound.
CLUB, DRUM, USER (DJ PAD)
Selects CLUB, DRUM or USER sound effect to
mix.
(If you want to use USER, you have to register a
source with “LG XBOOM” app.)
1, 2, 3 (DJ PAD)
Press a desired sound pad.
n DJ EFFECT
Selects a desired DJ effect.
USER EQ
Selects the equalizer created by your own.
(Page 46)
LIGHTING
Selects the lighting mode.
o DJ SCRATCHER / LEVEL CONTROL
- Turns clockwise or counterclockwise to make
scratch sound.
- Turns clockwise or counterclockwise to control
the USER EQ level.
- Adjust DJ EFFECT level.
- Selects the vocal effects.
- Selects the lighting effects.
p PARTY ACCELERATOR MODE
Selects PARTY ACCELERATOR MODE.
DJ LOOP
Selects DJ LOOP mode.
(DJ LOOP mode can use during USB playback.)
q KEY CHANGER (l/L)
Changes the key to suit your vocal range.
VOICE CANCELLER
You can reduce the vocal tones during music
playback from various input sources.
VOCAL EFFECTS
Selects various vocal effects mode.
MIC ECHO
Selects ECHO mode.
r MIC VOL. (Microphone Volume)-/+
Adjust microphone volume.
1
Getting Started
j C / V (Skip/Scan)
- Skips backward or forward.
- Scans for a section within a track/file/chapter.
- Selects the radio stations.
13
14 Getting Started
Front panel / Rear panel
1
Getting Started
d
a
b
e
f g h
i j
c
d
k
d
a
(Remote sensor)
e AUX IN 2 (L/R): Connect an auxiliary device.
b MIC (Microphone) 1/2 jack
f AUX IN 1: Connect a portable device.
c Disc tray
g ANTENNA FM
d Lighting
h SERVICE ONLY: S/W download connector
>>Caution
Place the speaker at a safe distance from the
child’s reach. Otherwise it may result in the
speaker falling down and causing personal injury
and/or property damage.
i HDMI OUT TO TV: Connect to TV
j OPTICAL IN: Connect an optical device.
k AC IN socket
>>Caution
yy Connect the power cord to wall outlet
directly if possible. Or when you use an
extension cable, it is highly recommended
to use an extension cable of 110 V / 15 A
or 230 V / 15 A, otherwise the unit may
not operate properly because of the lack of
power supply.
yy Do not overload the extension cord with
excessive electrical load.
Getting Started
15
>>Caution
Carrying the unit
yy Do not roll the unit on an unpaved road or
the stairs.
The unit has wheels and handles so you can easily
move the unit.
yy When carrying the unit, be careful not to
drop it.
yy Do not place the unit on anything unstable.
Place the unit at a safe distance from a child’s
reach.
yy Be careful so that the unit does not fall
down. Otherwise it may result in malfunction
or cause personal injury and/or property
damage.
Handles
Useful functions for using the unit
Function
Description
It allows you to control the
volume of this unit by your TV
TV Remote On/
remote control even by other
Off
company’s product.
(Page 47)
Initial setting of this function
was set to on.
It allows you to connect a
Bluetooth device only on
BT Lock On/Off BT (Bluetooth) and LG TV
functions.
(Page 42)
Initial setting of this function
was set to off.
To do
Do this
ON
Press and hold [ on the remote control for
3 seconds in Optical function.
OFF
Press and hold [ on the remote control for
3 seconds in Optical function.
ON
Press and hold Xon the remote control
or N on the unit for 5 seconds in BT
(Bluetooth) function.
OFF
Press and hold Xon the remote control
or N on the unit for 5 seconds in BT
(Bluetooth) function.
ON
Auto Power On It allows the unit to turn on
automatically by input signals :
(Page 52)
Optical, LG TV or BT (Bluetooth) OFF
Turn off the unit by pressing 1 on the unit
for 5 seconds.
Turn off the unit by pressing 1 on the unit
for 5 seconds.
Getting Started
yy Disconnect all connected cables before
carrying the unit.
1
16 Connecting
Connections to Your TV
HDMI Out Connection
2
Connecting
If you have a HDMI TV or monitor, you can connect it
to this unit using a HDMI cable (Type A, High Speed
HDMI™ Cable).
Connect the HDMI OUT jack on the unit to the HDMI
IN jack on a HDMI compatible TV or monitor.
Set the TV’s source to HDMI (refer to TV’s Owner’s
manual).
Unit
TV
,,Note
yy You can fully enjoy digital audio and video
signals together with this HDMI connection.
yy When you use HDMI connection, you can
change the resolution for the HDMI output.
(Page 17)
>>Caution
yy Changing the resolution when the connection
has already been established may result in
malfunctions. To solve the problem, turn off
the unit and then turn it on again.
yy When the HDMI connection with HDCP is
not verified, TV screen is changed to black or
green screen or the snow noise may occur
on the screen. In this case, check the HDMI
connection, or disconnect the HDMI cable.
yy Make sure the unit is connected directly to
the TV. Tune the TV to the correct video input
channel.
Connecting 17
,,Note
yy If a connected HDMI device does not accept
the audio output of the unit, the HDMI
device’s audio sound may be distorted or may
not output.
yy When you connect a HDMI or DVI compatible
device make sure of the following:
The unit provides several output resolutions for
HDMI.
You can change the resolution using [Setup] menu.
1. Press ! on the remote control.
2. Use W/S/A/D on the remote control to
select the [Setup] and press m on the remote
control.
The [Setup] menu appears.
- The connected device’s video input is set
correctly for this unit.
- The connected device is compatible with
720 x 480i (or 576i), 720 x 480p (or
576p), 1280 x 720p, 1920 x 1080i or
1920 x 1080p video input.
yy Not all HDCP-compatible HDMI or DVI
devices will work with this unit.
- The picture will not be displayed properly
with non-HDCP device.
- This unit does not playback and TV screen
is changed to black or green screen or the
snow noise may occur on the screen.
yy If there is noise or lines on the screen, please
check the HDMI cable and use a higher
version cable than High Speed HDMI™ Cable.
yy The HDMI sounds output only DVD/CD
function (Except playback effect).
2
Connecting
- Try switching off the HDMI/DVI device and
this unit. Next, switch on the HDMI/DVI
device and leave it for around 30 seconds,
then switch on this unit.
Resolution Setting
3. Use W/S on the remote control to select
[Display] option then press D on the remote
control to move to the second level.
4. Use W/S on the remote control to select the
[Resolution] option then press D on the remote
control to move to the third level.
5. Use W/S on the remote control to select the
desired resolution then press m on the remote
control to confirm your selection.
,,Note
yy If your TV does not accept the resolution you
have set on the player, you can set resolution
to 480p (or 576p) as follows: Press Z for
more than 5 seconds.
yy [Home Menu] appears only on DVD/CD
function.
18 Connecting
AC Power Cord
Connection
Optional Equipment
Connection
1. Connect one end of the AC power cord (included)
to the AC IN socket.
AUX IN 1 Connection
Connect an output (earphone or line out) of portable
device (MP3 or PMP etc) to the AUX IN 1 (3.5 mm)
connector.
2
Connecting
3.5 mm stereo
cable
2. Plug the other end into the wall outlet.
,,Note
Unplug the AC power cord from the wall outlet
if you do not to use for an extended period of
time.
MP3 player etc.
Connecting 19
AUX IN 2 Connection
Connect an output of auxiliary device (Camcorder, TV,
Player, etc) to the AUX IN 2 (L/R) connector.
If your device has only one output for audio (mono),
connect it to the left(white) audio jack on the unit.
Listening to music from your portable
player or external device
The unit can be used to play the music from many
types of portable player or external device.
1. Connect the portable player to the AUX IN 1
connector of the unit.
Or
Connect the external device to the AUX IN 2
connector of the unit.
3. Press F to select AUX 1 or AUX 2 function.
White
4. Turn on the portable player or external device and
start it playing.
,,Note
Red
Audio cable
DVD, Blu-ray player etc.
Automatically switches to the AUX 1 function
when you connect the portable device to the
AUX IN 1 connector.
Connecting
2. Turn the power on by pressing 1.
2
20 Connecting
OPTICAL IN Connection
LG Sound Sync
1. Connect an optical output jack of external
devices to the OPTICAL IN jack.
Optical cable
2
You can control some functions of this unit by
your TV’s remote control with LG Sound Sync. It is
compatible with LG TV that supports LG Sound Sync.
Make sure your TV has the LG Sound Sync logo.
Connecting
Controllable function by LG TV’s remote control :
Volume up/down, mute
Refer to the TV’s instruction manual for the details of
LG Sound Sync.
LG Sound Sync with wired connection
1. Connect your LG TV to the unit by using an
optical cable.
2. Set up the sound output of TV to listen to the
sound through this unit :
TV setting menu [ [Sound] [ [TV Sound
output] [ [LG Sound Sync (Optical)]
3. Turn on the unit by pressing 1
TV or digital device etc.
2. Press F until OPTICAL function is selected.
,,Note
yy Before connecting the optical cable, be sure
to remove the protection plug cover if your
cable has the cover.
yy You can enjoy the TV audio through the
speakers of this unit. In the case of some TV
models, you must select the external speaker
option from the TV menu. (For details,
reference your TV user manual.)
yy Set up the sound output of TV to listen to the
sound through this unit : TV setting menu [
[Sound] [ [TV Sound output] [ [External
speaker (Optical)]
yy Details of TV setting menu vary depending on
models of your TV.
yy Playback effects and MIC function do not
operate on OPTICAL or LG OPT function.
4. Press F until OPTICAL function is selected.
You can see “LG OPT” on the display window if
connecting normally between this unit and your
TV.
System Setting 21
LG Sound Sync with wireless
connection
1. Turn on the unit by pressing 1.
2. Press F until LG TV function is selected.
yy If the connection fails, check the conditions of
this unit and your TV : power, function.
yy Make sure of the condition of this unit and
the connection in the cases below when
using LG Sound Sync.
-- The unit is turned off.
-- Changing to a different function.
-- Disconnecting the wireless connection
caused by interference or a distance.
-- Disconnecting the optical cable.
yy The amount of time to turn off this unit is
different depending on your TV.
yy If you try to change the function on using
the LG TV function, volume will be change
according to the LG TV volume level.
yy Details of TV setting menu vary depending on
models of your TV.
yy If you turned off the unit directly by pressing
1, LG Sound Sync will be disconnected.
To use this function again, you should
reconnect the TV and the unit.
yy The volume may be increased when the TV
and this unit is connected by LG Sound Sync.
Decrease the TV volume and then connect
with this unit.
yy When you turn on your LG TV connected
by LG Sound Sync or enter LG TV function,
this unit changes the function to LG TV
automatically.
yy You should set the TV Sound output manually
depending on the TV version.
yy If you control TV volume when this unit and
TV are connected by LG Sound Sync, this unit
may louder the volume due to synchronizing
volume with TV’s.
3
System Setting
3. Set up the sound output of TV to listen to the
sound through this unit :
TV setting menu [Sound] [TV Sound output]
[LG Sound Sync (Wireless)]
“PAIRED” appears on the display window for
about 3 seconds and then you can see “LG TV”
on the display window if the TV and this unit are
connected normally.
,,Note
yy You can also use the remote control of
this unit while using LG Sound Sync. If you
use TV’s remote control again, the unit
synchronizes with the TV. (According to TV
Specifications, the volume and mute of this
unit synchronize with TV.)
22 System Setting
USB Connection
Antenna Connection
Connect a USB device (or MP3 player, etc.) to the
USB ports on the unit.
Connect the supplied FM antenna for listening to
the radio.
USB device
3
System Setting
FM antenna
,,Note
Removing the USB device from the unit:
1. Choose a different function/mode or
press Z twice in a row.
2. Remove the USB device from the unit.
,,Note
Be sure to fully extend the FM wire antenna.
System Setting 23
Adjust the setup
settings
By using the Setup menu, you can make various
adjustments to items such as picture and sound.
To display and exit the Setup
menu
1. Press !on the remote control.
Displays the [Home Menu].
You can also set a language for the subtitles and the
Setup menu, among other things. For details on each
Setup menu item, see pages 23 to 26.
2. Select an [Setup] by using A/Don the remote
control.
During the first use of this unit, the initial language
setup menu appears on your TV screen. You must
complete initial language selection before using the
unit. English will be selected as the initial language.
3. Press mon the remote control.
Displays the [Setup].
1. Press 1 to turn the unit on. The language setup
menu will appear on the screen.
About help menu for Setup
2. Use W/S/A/D on the remote control to
select a language then press m on the remote
control.
The confirm menu will appear.
3. Use A/D on the remote control to select the
[Enter] then m on the remote control to finish
the language setup.
4. Press !on the remote control or ] on the
remote control to exit in the [Setup] Menu.
Menu
Buttons
W/S
Move
W/S
Moving to another
menu.
A
Move
A
Moving to previous
level.
D
Move
D
Moving to next level
or selecting menu.
]
To exit the [Setup]
menu.
m
To confirm menu.
]
Close
m
Select
,,Note
Operation
[Home Menu] appears only on DVD/CD
function.
System Setting
OSD Initial language settings Optional
3
24 System Setting
Language
Display Mode
Menu Language
The Display Mode setting works only when the TV
Aspect mode is set to 4:3.
Select a language for the Setup menu and on screen
display.
Disc Audio / Disc Subtitle / Disc Menu
3
Select the language you prefer for the audio track
(disc audio), subtitles, and the disc menu.
System Setting
[Original]
Refers to the original language in which the disc
was recorded.
[Letterbox]
Displays a wide picture with bands on the upper
and lower portions of the screen.
[Panscan]
Automatically displays the wide picture on the
entire screen and cuts off the portions that do
not fit. (If the disc/file is not compatible with Pan
Scan, the picture is displayed at Letterbox ratio.)
[Other]
Resolution
To select another language, press numeric
buttons and then m on the remote control
to enter the corresponding 4-digit number
according to the language code list on the page
61.
If you enter the wrong language code, press
CLEAR/DELETE on the remote control.
Sets the output resolution of HDMI video signal.
Refer to “Resolution Setting” for details about the
resolution (page 17).
[Auto]
[Off (for Disc Subtitle)]
If the HDMI jack is connected to TVs providing
display information (EDID), automatically selects
the resolution best suited to the connected TV.
Turns off Subtitle.
[1080p]
Outputs 1080 lines of progressive video.
Display
TV Aspect
Select the screen aspect to use based on the shape
of your TV screen.
[1080i]
Outputs 1080 lines of interlaced video.
[720p]
Outputs 720 lines of progressive video.
[480p (or 576p)]
[4:3]
Outputs 480 (or 576) lines of progressive video.
Select when a standard 4:3 TV is connected.
[480i (or 576i)]
[16:9]
Outputs 480 (or 576) lines of interlaced video.
Select when a 16:9 wide TV is connected.
System Setting 25
Audio
Semi Karaoke
DRC (Dynamic Range Control)
When a chapter/ title/ track is fully finished, this
function shows the score in the screen with a fanfare
sound.
Make the sound clear when the volume is turned
down and prevent a sudden sound increase (Dolby
Digital only). Set to [On] for this effect.
HD AV Sync
When you finished singing a score will appear on
the screen.
[Off]
Fanfare and score do not appear on the screen.
,,Note
yy DVD, DVD Karaoke discs with more than 2
tracks are available discs for the this function.
yy When you watch movies, “off ” the Semi
Karaoke at the SETUP menu or enjoy it
without connecting the MIC if the fanfare or
score appears during changing a chapter.
yy This function operate on the DVD/CD mode.
yy The Semi Karaoke function is available only
when a microphone is connected.
yy If you do not use the microphone, turn down
the volume and disconnect the microphone.
3
System Setting
Sometimes Digital TV encounters a delay between
picture and sound. If this happens you can
compensate by setting a delay on the sound so
that it effectively ‘waits’ for the picture to arrive:
this is called HD AV Sync. Use W/S on the remote
control to scroll up and down through the delay
amount, which you can set at anything between 0
and 300ms.
[On]
26 System Setting
Lock (Parental Control)
Password
Initial Setting the Area Code
You can enter or change password.
When you use this unit for the first time, you have to
set the Area Code.
1. Select the [Lock] menu and then press D on the
remote control.
3
System Setting
2. Press D on the remote control.
To access the [Lock] options, you must input the
password you have created.
Input a password and press m on the remote
control. Enter it again and press mon the remote
control to verify.
If you make a mistake before pressing mon the
remote control, press CLEAR/DELETE on the
remote control.
1. Select [Password] on the [Lock] menu and then
press D on the remote control.
2. Press mon the remote control.
3. Input a password and press mon the remote
control.
To change the password, press mon the remote
control when the [Change] option is highlighted.
Input a password and press mon the remote
control.
Enter it again and press mon the remote control
to verify.
4. Press ! on the remote control to exit the menu.
,,Note
3. Select the first character using W/S on the
remote control.
If you forget your password, you can clear it
using the following steps:
4. Press mon the remote control and select the
second character using W/S on the remote
control.
1. Select the [Setup] menu on the
[Home Menu].
5. Press mon the remote control to confirm your
Area code selection.
Rating
Blocks playback of rated DVDs based on their
contents. Not all discs are rated.
2. Input the 6-digit number “210499” and
pressmon the remote control.
The password is cleared.
Area Code
1. Select [Rating] on the [Lock] menu then press D
on the remote control.
Enter the code of the area whose standards were
used to rate the DVD video disc, based on the list on
page 60.
2. Input a password and press m on the remote
control.
1. Select [Area Code] on the [Lock] menu then
press D on the remote control.
3. Select a rating from 1 to 8 using the W/S on
the remote control.
2. Input a password and press m on the remote
control.
[Rating 1-8]
Rating one (1) has the most restrictions and
rating eight (8) is the least restrictive.
3. Select the first character using W/S on the
remote control.
[Unlock]
4. Press m on the remote control and select the
second character using W/S on the remote
control.
If you select unlock, parental control is not active
and the disc plays in full.
5. Press m on the remote control to confirm your
Area code selection.
4. Press m on the remote control to confirm your
rating selection.
Operating 27
Using the Home Menu
1. Press !on the remote control.
Displays the [Home Menu].
2. Select an option by using A/D on the remote
control.
3. Press m on the remote control then selected
option menu.
4
[Music] – Displays [MUSIC] menu.
Operating
[Movie] – S
tart video media’s playback or displays the
[MOVIE] menu.
[Photo] – Displays [PHOTO] menu.
[Setup] – Displays the [SETUP] menu.
,,Note
yy [Home Menu] appears only on DVD/CD
function.
yy USB function is only avaliable on music
playback.
28 Operating
Basic Operations on
Disc
1. Insert the disc by using the B.
2. Press ! on the remote control.
Displays the [Home Menu].
To
Playing
repeatedly or
randomly
-A
udio CD/ MP3/ WMA: Track/
All/ Random/ Off
4. Press m on the remote control then selected
option menu.
Do this
4
Stop
Operating
Playback
Press X on the remote control
or N on the unit.
Pause
Press M on the remote control
or N on the unit.
Frame-byFrame playback
Press M on the remote control
repeatedly to play title Frameby-Frame. (DVD Movie title,
Movie file only)
Skipping to the
next/ previous
chapter/ track/
file
Locating a
point quickly by
playing a file in
fast forward or
fast reverse
Press Z.
During playback, press C/V
to go to the next chapter/
track/ file or to return to
the beginning of the current
chapter/ track/ file.
Press C twice briefly to step
back to the previous chapter/
track/ file.
During playback, press c/v
on the remote control or press
and hold C/V on the unit
repeatedly to select the required
scan speed.
To return to normal speed,
press X on the remote control
or N on the unit.
- DVD: Chapter/ Title/ Off
- Video(MOVIE): Title/ All/ Off
3. Select an option by using A/D on the remote
control.
To
Do this
Press h REPEAT on the
remote control repeatedly,
and the current title, chapter
or track will be played back
repeatedly or randomly.
Slowing down
the playing
speed
Selecting
a track/file
directly
In the pause mode, Press
c/v on the remote control
or press and hold C/V on
the unit repeatedly to select the
required speed. (DVD Movie
title only)
In the pause mode, press
v on the remote control
or press and hold V on the
unit repeatedly to select the
required speed. (Movie file only)
Press 0 to 9 numerical buttons
on the remote control to go to
the desired file or track directly.
Operating 29
Advanced Operations on
Disc
To display the DVD title
Displaying Disc Information
on-screen
1. Press TITLE on the remote control.
The disc’s title appears.
You can display various information about the disc
loaded on-screen.
1. Press m INFO/DISPLAY on the remote control
to show various playback information.
The displayed items differ depending on the disc
type or playing status.
r
When you play a DVD which contains several title,
you can select the title you want using the Menu.
2. Select the menu by pressing W/S/A/D on
the remote control.
3. Press m on the remote control to confirm.
1.5 times speed playback
r
The 1.5 speed allows you to watch the pictures and
listen to the sound quicker than playing at a normal
speed.
Title – Current title number/ total number of titles.
Chapter – Current chapter number/ total number of
chapters.
1. During playback, press X on the remote control
to play at 1.5 times speed.
“dX1.5” appears on the screen.
Time – Elapsed playing time.
2. Press X on the remote control again to exit.
Audio – Selected audio language or channel.
Screen Saver
Subtitle – Selected subtitle.
Angle – S
elected angle/ total number of angles.
,,Note
If any button is not pressed for a few seconds,
the on-screen display disappears.
To display the DVD Menu
r
When you play a DVD which contains several menu,
you can select the menu you want using the Menu.
1. Press DISC MENU on the remote control.
The disc’s menu appears.
2. Select the menu by using W/S/A/D on the
remote control.
3. Press m on the remote control to confirm.
The screen saver appears when you leave the unit in
Stop mode for about five minutes.
4
Operating
2. You can select an item by pressing W/S on the
remote control and change or select the setting
by pressing A/D on the remote control.
30 Operating
Starting play from selected time
Resume playback
ry
ryut
To start playing at any chosen time on the file or title.
The unit records the point where you pressed the Z
depending on the disc.
If “MZ (Resume Stop)” appears on the screen briefly,
press X on the remote control or N on the unit to
resume playback
(from the scene point).
1. Press m INFO/DISPLAY on the remote control
during playback.
2. Press W/S on the remote control to select the
time clock icon and “--:--:--” appears.
4
Operating
3. Input the required start time in hours, minutes,
and seconds from left to right.
If you enter the wrong numbers, press CLEAR/
DELETE on the remote control to remove the
numbers you entered.
Then input the correct numbers.
For example, to find a scene at 1 hour,
10 minutes, and 20 seconds, enter “11020” by
using numerical buttons on the remote control.
If you press Z twice or unload the disc,
“Z”(Complete Stop) appears on the screen.
The unit will clear the stopped point.
,,Note
yy The resume point may be cleared when a
button is pressed (for example; 1, B, etc).
yy This function may not work on some disc or
title/track.
4. Press m on the remote control to confirm.
Playback starts from the selected time.
Changing subtitle code page
y
If the subtitle is not displayed properly, you can
change the subtitle code page to view the subtitle
file properly.
1. During playback, press m INFO/DISPLAY on the
remote control to display the On-Screen display.
2. Use W/S on the remote control to select the
[Code Page] option.
3. Use A/D on the remote control to select
desired code option.
4. Press ] on the remote control to exit the OnScreen display.
Operating 31
Marked Playback
ut
The mark function enables you to store your
favourite files from any disc in the unit memory.
1. Select [Music] on the [Home Menu].
Returning to the upper folder.
(MP3/ WMA only)
File information will be displayed
according to the ID3 TAG information
on the appropriate music file. (MP3
only)
To delete a Marker
1. Use W/S on the remote control to select the
track that you wish to erase from the marked file.
2. Press MARKER/JUKEBOX on the remote control.
To delete all Markers
Use W/S/A/D on the remote control to select
[Deselect All] then press m on the remote control in
program edit mode.
,,Note
The markers are also cleared when the disc is
removed, the unit is switched to power off or
the function is switched to others.
4
Operating
Selecting all tracks/files.
Deselecting all tracks/files.
Moving to the previous or next
file list.
2. Select a desired music on the [List] by using the
W/S on the remote control then press
MARKER/JUKEBOX on the remote control to
appears the mark on the list.
3. Press m on the remote control.
Displays the play mode.
4. Select the play mode by using the W/S on the
remote control and press m on the remote
control.
[Mark Play]
Marked playback.
[Current Play]
Normal playback.
,,Note
If you want to select all files on the list, select
[Select All] and press m on the remote control.
32 Operating
Viewing a PHOTO file
About help menu in the full screen
i
Menu
Buttons
This unit can play discs with photo files.
m
Menu
m INFO/
DISPLAY
Displaying the Option
menu.
A/D
Moving to another file.
1. Select [Photo] on the [Home Menu] and press
m on the remote control
Moving to the previous or next
file list.
a/d
Prev./ Next
]
List
]
Operation
Returning to the
[Photo] menu.
Options while viewing a photo
You can use various options during viewing a photo
in full screen.
1. While viewing a photo in full screen, press
m INFO/DISPLAY on the remote control to
display the option menu.
4
Operating
2. Select an option using W/S/A/D on the
remote control.
Returning to the upper
folder.
2. Press W/S on the remote control to select a
folder, and then press mon the remote control.
3. If you want to view a slide show, press W/S on
the remote control to highlight a file and press
Xon the remote control.
About help menu in the [Photo] menu
Menu
Buttons
Operation
d Slide
Show
X
W/S/
A/D
Move
W/S/A/D
m
Select
m
Viewing a
particular file.
]
Close
]
Returning to the
[Home Menu].
Viewing a slide
show.
Moving to another
file or content.
a
b
c
d
e
a Current photo/ Total number of photos–
Use A/D on the remote control to view
previous/next photo.
b Slide Show d/M – Press m on the remote
control to start or pause slide show.
c Speed x3/ x2/ x1 – Use m on the remote
control to select a delaying speed between
photos in a slide show.
d Rotate – Press m on the remote control to
rotate the photo.
e Go to list – Press m on the remote control to
return [Photo] menu.
Operating 33
Basic Operations on
USB
1. Connect the USB device to the USB port.
2. Select USB function by pressing F.
To
Stop
Playback
Pause
Do this
Press Z.
Press X on the remote control or
N on the unit
Press M on the remote control or N
on the unit.
Press 0 to 9 numerical buttons on
Selecting a file
the remote control to go to the
directly
desired file directly.
-- In stop status,
Press C/V to go to the next/
previous file.
-- During playback,
(1) By using C/V buttons:
Press V to go to the next file.
Skipping to Playing in less than 3 seconds, press
the next/ C to go to the previous file.
previous file Playing after 3 seconds, press C to
go to the beginning of the file.
(2) By using SEARCH:
Rotate DJ SCRATCHER / SEARCH
& MULTI or C/V and press X on
the remote control or N on the unit
to play the file.
Playing
Press h REPEAT on the remote
repeatedly or control repeatedly. Refer to the note
randomly for details about the display change.
On Diplay
Description
OFF
Plays songs in order, and stops
the playback.
ONE
Plays a same song repeatedly.
FOLDER
ALL
SHUFFLE
Plays songs in a folder
repeatedly.
Plays all the songs repeatedly.
Plays all the songs once
randomly, and stops the
playback.
yy When you play JUKE BOX list, only ONE and
ALL are available.
yy Even after restarting the unit or switching
one function to another, you can listen to
music from the point where it’s last been
played.
yy USB function is only avaliable on music
playback.
4
Operating
Press and hold C/V or c/v
Scanning for a
on the remote control during
section within
playback and release it at the point
a file
you want to listen to.
,,Note
yy Repeat/Shuffle playback operates as follows.
34 Operating
Selecting a folder and
an MP3/WMA file
On the unit
,,Note
yy USB Folders/Files are recognized as below.
*
1. Press SEARCH and rotate DJ SCRATCHER /
SEARCH & MULTI or C/V until a desired file
appears. You can also search a folder if you press
SEARCH again.
2. Press OK or N to play the selected file. When
you search a folder, press OK to select a file in the
folder, then press OK or N again. The selected
file is played.
On the remote control
4
1. Press PRESET/FOLDER +/- on the remote
control repeatedly until a desired folder appears.
Operating
2. Select the file you want by using C/V.
3. Press X on the remote control.
yy If there is no file in a folder, the folder will not
appear.
yy Folders will be presented as the following
order;
ROOT FOLDER 1 FOLDER 3
FOLDER 7 FOLDER 8 FOLDER 5
FOLDER 6
yy File will be played from $ file No.1 to $ file
No.14 one by one.
yy Files and folders will be presented in order
recorded and may be presented differently
according to the record circumstances.
*ROOT: The first screen you can see when a
computer recognize the USB is “ROOT”.
Operating 35
Deleting a file/folder or format
You can delete file, folder on your USB or format the
USB.
1. Select USB function by pressing F.
2. Press CLEAR/DELETE on the remote control
repeatedly, the display changes as followings.
DEL FILE DEL DIR FORMAT
On Display
Description
DEL FILE Select the file you want to delete
DEL DIR
Select the folder you want to
delete
FORMAT
Select to format the USB device.
If you want to exit the current mode, press Z.
>>Caution
yy Do not extract the USB device during
operation. (play, delete, etc.)
yy Regular back up is recommended to prevent
data loss.
yy The delete function may not be supported
according to the USB status. (lock, etc.)
Operating
3. To delete file/folder or format, press and hold
CLEAR/DELETE on the remote control.
4
36 Operating
Advanced Operations on
USB
JUKE BOX Playback
JUKE BOX function enables you to make a playlist of
your favorite files from a USB. A playlist of up to 100
files can be entered.
4
Editing JUKE BOX
1. Press and hold MARKER/JUKEBOX on the
remote control to enter the edit mode.
(Playing will be stopped when you press
MARKER/JUKEBOX on the remote control.)
2. Press PRESET/FOLDER +/- on the remote
control to select a file to edit.
3. Press C/V on the remote control.
4. Press MARKER/JUKEBOX on the remote
control.
Operating
Making JUKE BOX list
5. Repeat 2 to 4 to store the other files.
1. Press and hold MARKER/JUKEBOX on the
remote control to enter the edit mode.
(Playing will be stopped when you press
MARKER/JUKEBOX on the remote control.)
6. Press MARKER/JUKEBOX on the remote control
once again.
To play the JUKE BOX list, press X on the remote
control after you edit the list.
2. Select a file by pressing C/V on the remote
control.
Deleting JUKE BOX list
3. Press MARKER/JUKEBOX on the remote control
to save the file.
Deleting function only works in the edit mode.
4. Repeat steps 2 - 3 to store other files.
(You can modify the list by pressing PRESET/
FOLDER +/- on the remote control to select the
JUKE BOX program number.)
5. Press MARKER/JUKEBOX on the remote control
once again.
To play the JUKE BOX list, press X on the remote
control after you make the list.
,,Note
When making or modifying the JUKE BOX list,
REPEAT mode is off.
Enjoying JUKE BOX
Press MARKER/JUKEBOX on the remote control
once. “ON - JUKE BOX” appears on the display
window.
To play JUKE BOX list, press X on the remote control.
To cancel it, press MARKER/JUKEBOX on the
remote control once.
“OFF - JUKE BOX” appears on the display window.
1. Press and hold MARKER/JUKEBOX on the
remote control to enter the edit mode.
Or
Press CLEAR/DELETE on the remote control
while JUKE BOX is played to enter the edit mode.
2. Select a song by pressing PRESET/FOLDER +/on the remote control repeatedly.
3. Press CLEAR/DELETE on the remote control
while a song is selected.
,,Note
yy If there is no JUKE BOX list, “NO PROG”
appears on the display window when you
press MARKER/JUKEBOX on the remote
control.
yy JUKE BOX is switched off in the case below.
-- Changing to a different function.
-- Turning off and on the unit.
-- Operating the numerical buttons on the
remote control.
-- Playing a file by using SEARCH and
DJ SCRATCHER / SEARCH & MULTI on
the unit.
yy JUKE BOX list is cleared in the case below.
-- Removing the USB device.
-- Deleting music files in the USB device.
Operating 37
Playback Effect
The unit supports various sound and playback
effects: DJ EFFECT, DJ SCRATCHER, DJ PAD, AUTO
DJ, DJ LOOP, PARTY ACCELERATOR, PARTY KICK
STARTER.
DJ EFFECT
It allows you to enjoy DJ EFFECT such as FLANGER/
PHASER/ WAH/ DELAY sound effect.
1. Press DJ EFFECT on the unit to select a desired
DJ EFFECT (FLANGER, PHASER, WAH, DELAY,
OFF).
,,Note
yy The DJ EFFECT mode is displayed for 3
seconds when a DJ EFFECT key on the unit
is inputted.
yy The current gage level is displayed when
adjusting gage.
yy If the function changed or the unit is turned
off and on, DJ EFFECT mode with DJ EFFECT
is turned off.
You can output and mix the sound effects of the
DJ SCRATCHER.
Rotating DJ SCRATCHER / SEARCH & MULTI or
DJ SCRATCHER / LEVEL CONTROL on the unit to
mix the scratch sound.
-- You can hear effect of scratch sound depending
on the direction in which you rotate
DJ SCRATCHER / SEARCH & MULTI or
DJ SCRATCHER / LEVEL CONTROL on the unit.
AUTO DJ
Auto DJ blends the end of one song into the
beginning of another for seamless playback.
It equalizes volume across tracks/files for
uninterrupted playback.
Press AUTO DJ on the remote control repeatedly, the
display changes as followings.
RANDOM (SHUFFLE)
SEQUENTIAL
OFF
On Display
Description
OFF
-
RANDOM
(SHUFFLE)
The music is played randomly on
this mode.
SEQUENTIAL
The music is played repeatedly on
this mode.
,,Note
yy AUTO DJ mode does not support searching
for a section within a track/file or to play
repeatedly or randomly.
yy If you move to other functions or stop the
music using Z on AUTO DJ mode, AUTO DJ
will be disabled.
yy AUTO DJ is not supported in the music file
whose length is less than 60 seconds.
yy Only SEQUENTIAL is selected when played
JUKE BOX list.
yy In USB function, SHUFFLE displays instead of
RANDOM.
4
Operating
2. Turn DJ SCRATCHER / LEVEL CONTROL on the
unit clockwise or counterclockwise to adjust the
DJ EFFECT level between 0 to 15.
DJ SCRATCHER
38 Operating
DJ PAD
DJ LOOP
It allows you to mix CLUB, DRUM or USER sound
effect. Each mode has up to 3 sounds effect.
The certain section (about 1 sec) of sound is
repeatedly played. (USB Only)
1. Press and hold DJ PAD (CLUB, DRUM or USER)
on the unit to select a desired DJ PAD sound
effect.
During playback, press and hold DJ LOOP on the unit
at the point you want. And you can cancel DJ LOOP
function by releasing it.
2. Press a DJ PAD (1, 2, 3) of desired sound on the
unit.
,,Note
4
yy If you want to use USER, you have to register
a source with “LG XBOOM” app. If the source
is not register to USER, “EMPTY” or “NO
SOUND” appears on the display window.
yy Initial DJ PAD mode is CLUB sound effect.
Operating
yy DJ PAD mode is displayed for 3 seconds
when you press DJ PAD (CLUB, DRUM or
USER) on the unit.
yy The DJ PAD sound is mixed when you press a
DJ PAD (1, 2, 3) on the unit.
yy The currently playing DJ PAD sound is
stopped and the selected DJ PAD sound
outputs if you press a different DJ PAD (1, 2,
3) on the unit while DJ PAD sound is playing.
,,Note
This function is released after operating 10
times or releasing DJ LOOP on the unit.
PARTY ACCELERATOR
It allows you to create a party atmosphere.
1. Select the mode by pressing PARTY
ACCELERATOR MODE on the unit.
The sound effect will react differently according
to the mode.
MODE 1
MODE 2
USER
2. After selecting the mode, slide up the lever of
PARTY ACCELERATOR on the unit to create a
party atmosphere.
The lighting on the speakers, the LED lighting and
the sound effect will react according to moving
the lever of PARTY ACCELERATOR on the unit.
OFF
ACCEL 1
,,Note
ACCEL 2
CLIMAX
If you want to use USER, you have to register
a source with “LG XBOOM” app. If the source is
not register to USER, “EMPTY” or “NO SOUND”
appears on the display window.
Operating 39
PARTY KICK STARTER
In power off state, this function turns on the unit
with Party Kick Starter sound.
In power on state, this function mixes the music with
Party Kick Starter sound.
In the power off state
1. Press PARTY STARTER on the unit
2. “COME ON” appears on the display window with
Party Kick Starter sound. Then volume level and
function will appear before the power off.
In the power on state
1. Press PARTY STARTER on the unit
2. “COME ON” appears on the display window with
Party Kick Starter sound.
yy In case of CHILDSAFE mode, Party Kick
Starter sound is not output.
Operating
,,Note
yy If you want to change sound effect, you have
to record a sound effect with “LG XBOOM”
app.
4
40 Operating
Using BLUETOOTH®
wireless technology
Listening to music stored on the
Bluetooth devices
About Bluetooth
Before you start the pairing procedure, make
sure the Bluetooth feature is activated on your
Bluetooth device. Refer to your Bluetooth device’s
user guide. Once a pairing operation is performed, it
does not need to be performed again.
Bluetooth is wireless communication technology for
short range connection.
The sound may be interrupted when the connection
interfered by the other electronic wave or you
connect the Bluetooth in the other rooms.
4
Operating
Connecting individual devices under Bluetooth
wireless technology does not incur any charges.
A mobile phone with Bluetooth wireless technology
can be operated via the Cascade if the connection
was made via Bluetooth wireless technology.
yy Available Devices: Smart phone, MP3, Notebook,
etc.
yy Version: 4.0
yy Codec: SBC, AAC
Bluetooth Profiles
In order to use Bluetooth wireless technology,
devices must be able to interpret certain profiles.
This unit is compatible with following profile.
A2DP (Advanced Audio Distribution Profile)
Pairing your unit and Bluetooth device
1. Turn on the unit.
,,Note
When Bluetooth connection lock is activated,
you can search Bluetooth device in BT function.
2. Operate the Bluetooth device and perform the
pairing operation. When searching for this unit
with the Bluetooth device, a list of the devices
found may appear in the Bluetooth device
display depending on the type of Bluetooth
device. Your unit appears as “LG OL90DK (XX)”.
,,Note
yy XX means the last two digits of
Bluetooth address. For example, if your
unit has a Bluetooth address such as
9C:02:98:4A:F7:08, you will see
“LG OL90DK (08)” on your Bluetooth device.
yy Depending on the Bluetooth device type,
some devices have a different pairing way. For
details about Bluetooth pairing, refer to your
Bluetooth device manual.
yy You can connect this unit with up to 3
Bluetooth devices simultaneously using the
same method as described above, only in the
Bluetooth function.
yy The multi phone pairing connection is only
supported on Android devices. (Multi phone
pairing connection may not be supported
depending on the connected device
specifications.)
yy Removable/detachable Bluetooth devices
(Ex: Dongle etc.) will not support multi phone
pairing.
Operating 41
3. When this unit is successfully connected with
your Bluetooth device, “PAIRED” appears on the
display window and change to Bluetooth device
name soon. Then “BT” will appear on the display
window.
,,Note
yy “PAIRED” will momentarily appear on the
display when you connect other devices for
multi phone pairing.
yy If the device name is unavailable, “_” will be
displayed.
4. Listen to music.
To play a music stored on your Bluetooth device,
refer to your Bluetooth device’s user guide.
yy When using Bluetooth technology, you have
to make a connection between the unit and
the Bluetooth device as close as possible and
keep the distance.
However, it may not work well in certain
situations as described below:
-- There is a obstacle between the unit and
the Bluetooth device.
-- There is a device using same frequency
with Bluetooth technology such as a
medical equipment, a microwave or a
wireless LAN device.
yy If Bluetooth connection does not work well,
try pairing it again.
yy Even if this unit is connected to up to 3
Bluetooth devices in the Bluetooth mode,
you can play and control music by using only
one of the connected devices.
yy Depending on the type of the device, you may
not be able to use the Bluetooth function.
yy You can enjoy wireless system using phone,
MP3, Notebook, etc.
yy The more distance between the unit and
the Bluetooth device, the lower the sound
quality becomes.
yy Bluetooth connection will be disconnected
when the unit is turned off or the Bluetooth
device gets too far from the unit.
yy When Bluetooth connection is disconnected,
connect the Bluetooth device to the unit
again.
yy When a Bluetooth device is not connected,
“BT READY” appears on the display window.
yy When you use the Bluetooth function,
adjust the volume to a proper level on the
Bluetooth device.
yy When you connect Bluetooth device (iOS
device etc.) to this unit or operate the device,
the volume level can be synchronized with
each other.
yy Bluetooth connection will be disconnected
when you change the Bluetooth function to
some other function. In “LG XBOOM” app
connection, only one device which you are
playing keeps Bluetooth connection. You can
control the Bluetooth device with this unit
but you cannot use sound output.
yy When entering the Bluetooth function,
this unit automatically connects to the last
connected Bluetooth device or the device
which played back last.
(Auto connection may not be supported
depending on the connected device
specifications.)
4
Operating
,,Note
,,Note
yy The sound may be interrupted when the
connection has interference from other
electronic devices.
42 Operating
Controls connected Bluetooth device
You can control connected Bluetooth device by the
unit; play, pause, stop, skip.
,,Note
yy Only Android OS and iOS is available to use
this function.
yy This function may not be supported
depending on the Bluetooth device, or
operated differently.
Bluetooth connection lock (BT LOCK)
4
Operating
You can limit Bluetooth connection to only
BT (Bluetooth) and LG TV function to prevent
unintended Bluetooth connections.
To turn this function on, press and hold Xon the
remote control or N on the unit for 5 seconds in
BT (Bluetooth) function.
“ON-BT LOCK” appears then you can limit Bluetooth
connection.
To turn this function on, press and hold Xon the
remote control or N on the unit for 5 seconds in
BT (Bluetooth) function.
“OFF-BT LOCK” appears.
,,Note
Even if you set up Bluetooth connection lock to
On, this unit turns on by Auto Power function.
Turn off Auto Power function to prevent it.
(Page 52)
Operating 43
Using the LG XBOOM
App
,,Note
Install “LG XBOOM” App onto
Your Bluetooth Device
There are two ways to install “LG XBOOM” App onto
Your Bluetooth Device.
yy Only Android OS is available to use
“LG XBOOM” app with this unit.
Install “LG XBOOM” App through QR
code
yy It is recommended to use the latest version
of app.
1. Install “LG XBOOM” app through QR code. Use
the scanning software to scan the QR code.
About “LG XBOOM” App
“LG XBOOM” app brings a suite of new features to
this unit.
,,Note
Below introduces you to a feature of “LG XBOOM”
app.
yy Make sure that your Bluetooth device is
connected to the Internet.
Multi Juke box: Your entertainment increases three
fold when you connect up to 3 Bluetooth phones
at the same time. Play music from both phones and
create a customized playlist from all phones.
yy Make sure that your Bluetooth device
has a scanning software application. If you
don’t have one, download one from “Google
Android Market (Google Play Store)”.
Sampler Creator: Record effects on your
smartphone and very simply sync them via
Bluetooth to the system. Be as creative as you can
be.
yy Depending on the area, QR code may not
work.
yy You can find the available application of this
unit by using “LG Audio” app.
-- Android O/S: Ver 5.0 (or later)
Operating
To enjoy more features, you are recommended to
download and install free “LG XBOOM” app.
4
2. Tap an icon for installation.
44 Operating
Install “LG XBOOM” App through
“Google Android Market (Google Play
Store)”
1. Tap the “Google Android Market (Google Play
Store)” icon.
2. In the search bar, type in the “LG XBOOM” and
search it.
3. In the search result list, find and tap “LG XBOOM”
to start downloading Bluetooth app.
4. Tap an icon for installation.
,,Note
4
yy Make sure that your Bluetooth device is
connected to the Internet.
Operating
yy Make sure that your Bluetooth device is
equipped with “Google Android Market
(Google Play Store)”.
Activate Bluetooth with “LG
XBOOM” App
“LG XBOOM” app helps to connect your Bluetooth
device to this unit.
Tap “LG XBOOM” app icon on the home screen to
open “LG XBOOM” app, and go to the main menu.
,,Note
yy “LG XBOOM” app will be available in the
software version as follow;
-- Android O/S: Ver 5.0 (or later)
yy If you use “LG XBOOM” app for operation,
there would be some differences between
“LG XBOOM” app and the supplied remote
control. Use the supplied remote control as
necessary.
yy Depending on the Bluetooth device,
“LG XBOOM” app may not work.
yy After connection of “LG XBOOM” app, music
may be output from your Bluetooth device.
In this case, try connecting procedure again.
yy If you operate the other applications or
change the settings on your Bluetooth
device while using “LG XBOOM” app,
“LG XBOOM” app may operate abnormally.
yy When “LG XBOOM” app operates abnormally,
check your Bluetooth device and the
connection of “LG XBOOM” app and then try
to connect again.
yy Depending on the smart phone's operating
system, you have some differences for
“LG XBOOM” operation.
yy Check Bluetooth setting on your Bluetooth
device if “LG XBOOM” app connection does
not work well.
Operating 45
Radio Operations
Presetting the Radio Stations
Be sure that FM antenna is connected. (Page 22)
Before tuning, make sure to turn down the volume.
Listening to the radio
1. Press F until FM appears in the display window.
The last received station is tuned in.
2. Auto tuning:
Press and hold TUNING-/+ on the remote
control or C/V on the unit until the frequency
indication starts to change, then release.
Scanning stops when the unit tunes in a station.
Manual tuning:
Press TUNING-/+ on the remote control or
C/Von the unit repeatedly.
3. Adjust the volume by pressing VOL +/- on the
remote control or by rotating MASTER VOL. +/knob on the unit repeatedly.
Improving poor FM reception
Press Xon the remote control or N on the unit.
This will change the tuner from stereo to mono and
usually improve the reception.
1. Press F until FM appears in the display window.
2. Select the desired frequency by pressing
TUNING -/+ on the remote control or C/V
on the unit.
3. Press m on the remote control. A preset number
will blink in the display window.
4. Press PRESET/FOLDER +/- on the remote
control to select the preset number you want.
5. Press m on the remote control.
The station is stored.
6. Repeat steps 2 to 5 to store other stations.
4
7. To listen a preset station, press
PRESET/FOLDER +/- or 0 to 9 numerical
buttons on the remote control.
Operating
Or
You can preset 50 stations for FM.
Deleting all the saved stations
1. Press CLEAR/DELETE on the remote control.
“DEL ALL” will flash up on the display window
2. Press CLEAR/DELETE on the remote control to
erase all the saved radio stations.
“DELETED ALL” will scroll on the display window.
46 Operating
Sound adjustment
Setting the sound mode
This system has a number of pre-set equalizers. The
displayed items for the equalizer may be different
depending on sound sources and effects.
You can select a desired sound mode by using
EQUALIZER on the remote control.
On Display
4
BASS (BASS BLAST)
or
BASS+ (BASS BLAST+)
Operating
POP
CLASSIC
ROCK
JAZZ
Description
Reinforces the bass
and powerful sound.
This program lends
an enthusiastic
atmosphere to the
sound, giving you the
feeling you are at an
actual rock, pop, jazz or
classic concert.
FOOTBALL
You can enjoy the
equalizer FOOTBALL
STADIUM.
STANDARD
You can enjoy
optimized sound.
You can select a desired sound mode by using
SPECIAL EQ on the remote control or SPECIAL EQ /
BASS BLAST (or BASS BLAST+) on the unit.
On Display
FUNK, REGUETON,
SAMBA,
MERENGUE, AXE,
SALSA, SERTANEJ,
FORRO
ARABIC
DANGDUT
Region
Description
Latin
America
Optimized
equalizer
for the
Middle East
music genre
prefered in
Indonesia
each region.
AFRO
Africa
INDIA
India
,,Note
By pressing and holding SPECIAL EQ / BASS
BLAST (or BASS BLAST+) on the unit for 3
seconds, you can directly select BASS (BASS
BLAST) or BASS+ (BASS BLAST+) effect.
Setting the USER EQ
You can adjust the sound level of Bass, Middle and
Treble as your preference.
1. Press USER EQ on the unit. “USER EQ” is
displayed.
2. Press USER EQ on the unit repeatedly until
desired setting appears in the display window.
3. Rotate DJ SCRATCHER / LEVEL CONTROL on
the unit to adjust the value.
Operating 47
Other Operations
Turn off the sound temporarily
Press [on the remote control to mute your sound.
You can mute your unit, for example, to answer the
telephone, the “MUTE” will appear in the display
window.
To cancel it, press [on the remote control again or
change the volume level.
DEMO
Resume stop
The unit records the point where you pressed Z
depending on the disc or USB.
If you press Z twice, the unit will clear the stopped
point.
You can control some functions of this unit by your
TV remote control even by other company’s product.
Controllable functions are volume up/down and
mute.
Press and hold [on the remote control for about
3 seconds in OPTICAL function to turn on or off this
function.
On Display
Description
ON-TV REMOTE
TV REMOTE function is
turned on.
OFF-TV REMOTE
TV REMOTE function is
turned off.
,,Note
yy Supported TV brands
LG
Panasonic
Philips
Samsung
Sharp
Sony
Toshiba
Vizio
yy Make sure that the sound output of your TV
is set to [External speaker].
yy Depending on the remote control, this
function may not work well.
yy This function does not operate on LG TV's
magic remote control.
yy This function only operates on the OPTICAL
function.
4
Operating
In the power off state, press DEMO on the unit
once. The unit will power on and display the each of
functions with demo sound in the display window.
To cancel the DEMO function, press DEMO on the
unit once more.
Using your TV remote control
48 Operating
CHILDSAFE Mode
Using Microphone
This function helps to prevent you from being
surprised when you turn on the unit in case that the
volume of the unit is set at a high level.
1. Connect your microphone to the MIC jack.
To turn on CHILDSAFE mode, press and hold OK on
the unit when the volume of the unit is “MIN”.
In CHILDSAFE mode, the volume increase gradually.
To turn off CHILDSAFE mode, press and hold OK on
the unit when the volume of the unit is “MIN” and
this mode is turned on.
,,Note
4
Operating
In case of USB or BT (Bluetooth) function,
CHILDSAFE mode does not work after about
2 minutes from power on the unit even if this
mode is enabled.
Last Scene Memory
r
This unit memorizes last scene from the last disc
that is viewed. The last scene remains in memory
even if you remove the disc from the unit or switch
off the unit. If you load a disc that has the scene
memorized, the scene is automatically recalled.
Power Resume - Optional
r
Even if the power suddenly goes out, turn on the
unit and then it plays a position where the contents
is being played. System will periodically save current
playback status.
System Select - Optional
You must select the appropriate system mode for
your TV system. Press and hold M on the remote
control for more than five seconds to be able to
select a system in the
[Home Menu]. (NTSC
PAL)
,,Note
If the USB device is connected or a disc is
inserted, this function is not operated.
2. Play the music you want.
3. Sing along with the accompaniment. Adjust the
microphone volume by pressing MIC VOL -/+
on the remote control or rotating MIC VOL. -/+
clockwise or counterclockwise on the unit .
,,Note
yy When not using the microphone, set the MIC
volume to minimum or turn off the MIC and
remove the microphone from the MIC jack.
yy If the microphone is set too near the speaker,
a howling sound may be produced. In this
case, move the microphone away from the
speaker or decrease the sound level by using
the MIC VOL - on the remote control or
MIC VOL. -/+ on the unit.
yy If sound through the microphone is extremely
loud, it may be distorted. In this case, set the
microphone volume by pressing MIC VOL on the remote control or rotating
MIC VOL. -/+ on the unit.
yy You can give an echo effect to the sound
from the microphones by pressing
MIC ECHO.
Operating 49
VOICE CANCELLER
KEY CHANGER
You can reduce the vocal tones during music
playback from various input sources.
You can adjust the key to 9 steps (4 steps higher, 4
steps lower and the original key).
Press the VOICE CANCELLER and
“ON - VOICE CANCELLER” will appear in display
window.
yy To make key more sharp, one by one, press the
KEY CHANGER(L) repeatedly during playback.
To cancel it, press VOICE CANCELLER again.
The quality of the VOICE CANCELLER may be
different depending on the recording conditions of
music files.
,,Note
yy This function is available in the DVD/CD, USB
or BT (Bluetooth) Function.
yy This function is available to use only when a
microphone is connected.
yy If a microphone is not connected, “INSERT
MIC” appears in the display window.
yy It is not available on the mono source.
yy To initialize it, change the function or
disconnect the microphone.
yy This function may not be initialized depending
on the status of connected devices.
,,Note
yy This function is available in the DVD/CD, USB
or BT (Bluetooth) Function.
yy To initialize it, change the function, disconnect
the microphone or change the music.
yy This function may not be initialized depending
on the status of connected devices.
yy If the function is not available, “NOT SUPPORT”
appears in the display window.
yy If a microphone is not connected, “INSERT MIC”
appears in the display window.
4
Operating
yy If the function is not available, “NOT SUPPORT”
appears in the display window.
yy To make the key more flatten, one by one,
press the KEY CHANGER(l) repeatedly during
playback.
50 Operating
VOCAL EFFECTS
ECHO
When you connect your microphone to the MIC jack,
you can enjoy karaoke function by changing voice in
the various source.
When you connect your microphone to the MIC jack,
you can give an echo effect to the sound from the
microphones by pressing MIC ECHO.
To select various vocal effects mode, pressing
VOCAL EFFECTS repeatedly or pressing VOCAL
EFFECTS and then turning DJ SCRATCHER / LEVEL
CONTROL on the unit when vocal effects mode
appears in the display window.
4
BASS SOPRANO HELIUM ROBOT
DUET MAN DUET WOMAN BASS ECHO1
SOPRANO ECHO1 HELIUM ECHO1
ROBOT ECHO1 DUET MAN1 DUET
WOMAN1 BASS ECHO2 SOPRANO
ECHO2 HELIUM ECHO2 ROBOT ECHO2
DUET MAN2 DUET WOMAN2 OFF
Operating
,,Note
yy If a microphone is not connected, “INSERT
MIC” appears in the display window.
yy If you press KEY CHANGER, DJ EFFECT or
MIC ECHO on VOCAL EFFECTS mode, after
backing up current VOCAL EFFECTS, turn
off VOCAL EFFECTS mode and operate KEY
CHANGER, DJ EFFECT or ECHO mode.
yy To turn off VOCAL EFFECTS mode, press and
hold VOCAL EFFECTS.
ECHO 1
ECHO 2
OFF
,,Note
yy If a microphone is not connected, “INSERT MIC”
appears in the display window.
yy If you press VOCAL EFFECTS button on
ECHO mode, after backing up current ECHO,
turn off ECHO mode and operate VOCAL
EFFECTS mode.
To operate ECHO mode, press MIC ECHO
again, after backing up current VOCAL
EFFECTS.
Operating 51
LIGHTING
Sleep Timer Setting
This function offers a party atmosphere by operating
the lighting on the unit.
Press SLEEP on the remote control repeatedly to
select delay time between 10 and 180 minutes.
After the delay time, the unit will be turned off.
Press LIGHTING on the unit repeatedly or press
LIGHTING on the unit and then turn DJ SCRATCHER
/ LEVEL CONTROL on the unit.
PARTY
WATER
FOREST
(MY STYLE)
OFF
,,Note
yy Lighting function is available in all functions.
yy Lighting mode retains in its previous mode
when you first press LIGHTING on the unit,
press again to change modes.
yy If you want to use MYSTYLE, you have to
register a source with “LG XBOOM” app.
To cancel the sleep function, press SLEEP on the
remote control repeatedly until “OFF” appears.
,,Note
yy You can check the remaining time before the
unit is turned off. Press SLEEP on the remote
control to check or change the remaining
time.
yy You can edit the remain time when the
remaining time or “DIMMER” is displayed.
Dimmer
yy If the illumination brightness is glaring, switch
on the room lights or turn off the LIGHTING
of the unit.
Press SLEEP on the remote control once.
The display window will be darkened by half.
yy Operation may be different depending on the
played music, connected device or setting
status.
yy To turn on or off upper and lower lighting
LED, press and hold LIGHTING on the unit
for 3 seconds.
On Display
Description
ON-FLASH
Upper and lower lighting
LED is turned on.
OFF-FLASH
Upper and lower lighting
LED is turned off.
To cancel it, press SLEEP on the remote control
repeatedly until “OFF” appears.
,,Note
All the lighting turns off when Dimmer is being
operated.
4
Operating
yy Do not look directly at the light emitting part
when the LIGHTING is turned on.
52 Operating
,,Note
Auto power down
This unit will turn itself off to save electricity in the
case were the main unit is not connected to an
external device and is not used for 15 minutes.
The unit will also turns itself off after six hours if
the main unit has been connected to another device
using the analog inputs.
Auto power down function is applied to only MAIN
unit in case of WIRELESS PARTY LINK connection.
In case of OTHER unit, Auto power down is available
after disconnection OTHER unit and MAIN unit.
How to disconnect the wireless
network
4
Operating
Connection or the wireless device Turn off the unit by
pressing the power button for more than 5 seconds
AUTO POWER On
This unit automatically turns on by an input source:
LG TV, BT(Bluetooth) or Optical.
When you turn on your TV connected to this unit,
this unit recognizes the input signal and selects the
suitable function. You can hear the sound from the
unit.
If you try to connect your Bluetooth device, this unit
turns on and connects your Bluetooth device.
You can play your music.
When you turn off this unit by pressing 1 on the
unit for 5 seconds each time, you can turn on or off
the AUTO POWER function.
On Display
Description
ON-AUTO POWER
AUTO POWER function is
turned on.
OFF-AUTO POWER
AUTO POWER function is
turned off.
yy Depending on the connected device, this
function may not operate.
yy Depending on the connected device, the unit
turns on but Bluetooth function may not be
connected.
yy If you disconnect Bluetooth connection by
this unit, some Bluetooth devices try to
connect to the unit continually. Therefore it is
recommended to disconnect the connection
before turning off the unit.
yy If you try to connect to the “LG XBOOM” app,
Bluetooth function of this unit is turned on.
yy If you turn on the unit using LG TV or
Bluetooth function, proper function of this
unit is turned on.
yy If you have already paired with this unit, this
unit can automatically turn on by an input
source when this unit is turned off.
yy If you turned off the unit directly, it cannot
be turned on automatically by AUTO POWER
function. However the unit can be turned
on by AUTO POWER function when optical
signal comes in after 5 seconds of no signal.
Operating 53
Auto function change
This unit recognizes input signals such as Optical,
BT(Bluetooth), LG TV and AUX 1 and then
automatically changes to the suitable function.
When you try to connect Bluetooth
device
When you try to connect your Bluetooth device to
this unit, Bluetooth function is selected. Play your
music on the Bluetooth device.
Setting the Clock
1. Turn the unit on.
2. Press and hold CLOCK on the remote control.
3. Select time mode by pressing C/V on the
remote control.
- AM 12:00 (for an AM and PM display) or 0:00
(for a 24 hour display)
4. Press SET on the remote control to confirm your
selection.
5. Select the hours by pressing C/V on the
remote control.
When you connect the portable device to the
AUX IN 1 connector, AUX 1 function is selected.
Play your music on the portable device.
7. Select the minutes by pressing C/V on the
remote control.
When optical signal comes in
When you turn on the external device connected to
this unit by an optical cable, this unit changes the
function to optical. You can hear the sound from your
device.
When LG TV is connected
When you turn on your LG TV connected by LG
Sound Sync, this unit changes the function to LG TV.
You can hear the sound from your TV.
,,Note
yy This function is not available during deleting.
yy This function only works with devices that
were previously connected.
yy If the Bluetooth connection lock function
is set, Bluetooth and LG TV connection will
be only available on Bluetooth and LG TV
function. (Page 42)
yy LG Sound Sync (Optical) changes as same as
OPTICAL function.
6. Press SET on the remote control.
8. Press SET on the remote control.
Setting the Clock through “LG
XBOOM” App
Install “LG XBOOM” app on your Android device.
(Page 43 -44)
Your unit’s clock will be automatically synchronized
with your device by activating Bluetooth connection
through “LG XBOOM” app.
4
Operating
When AUX IN 1 (3.5 mm stereo cable)
is connected
54 Operating
Using your player as an alarm
clock
1. Turn the unit on.
2. Press and hold ALARM on the remote control.
3. Press C/V on the remote control to change
the hours and minutes and press SET on the
remote control to save.
4
4. Press C/V on the remote control to select
function and press SET on the remote control to
save.
- Press C/V on the remote control to select
a preset number when you select tuner and
then, press SET on the remote control.
If there is no preset number, this step is skipped.
Operating
5. Press C/V on the remote control to change
the volume and press SET on the remote control
to save.
,,Note
yy If you set the clock time, you can check the
time by pressing CLOCK on the remote
control even when the player is turned off.
yy You can set alarm after you set the clock
time.
yy If you set the clock time and alarm, you
can check the alarm setting information by
pressing ALARM on the remote control even
when the unit is turned off.
yy You can select ALARM ON/OFF mode by
pressing ALARM on the remote control.
yy In case of DVD/CD or USB, this function is
available when you have music file. If you do
not have music file, the function is changed
to Tuner.
Operating 55
WIRELESS PARTY LINK
Connection
You can enjoy the sound by using two speakers.
For enjoying WIRELESS PARTY LINK, you need to
purchase another speaker.
It is compatible with unit that supports WIRELESS
PARTY LINK.
1. Press 3 TWIN on the unit.
ROLE SELECT appears in the display window.
2. Press 3 TWIN on the unit to select MAIN or
OTHER.
- unit: Selects MAIN.
-
unit: Selects OTHER.
Two units try to connect with each other.
3. When these units are successfully connected
to each other, each of connected device names
appears in the each unit.
4
Operating
56 Operating
,,Note
yy If you are using the LG Sound Sync or
OPTICAL connection, this function is not
available.
yy
4
Operating
yy
yy
yy
yy
yy
-- If you try to connect WIRELESS PARTY
LINK when using LG Sound Sync function
or OPTICAL function, “NOT SUPPORT”
appears in the display window.
-- If you change the function from any other
to OPTICAL or connected LG Sound Sync
/OPTICAL when using WIRELESS PARTY
LINK, the WIRELESS PARTY LINK will be
released.
You can use microphone in the OTHER unit
only. In case of OTHER unit, some functions
are supported only.
When WIRELESS PARTY LINK is
disconnected, OTHER unit is changed to
BT (Bluetooth) function.
If the connection is failed, “FAILED” appears in
the display window.
Mute function is synchronized with each
other.
WIRELESS PARTY LINK connection will be
disconnected when you turn off the unit or
press 3 TWIN on the unit.
Sound of MAIN unit and OTHER unit may be
different depending on playback status or
source.
,,Note
yy Check the following information when
connecting to Bluetooth.
-- You can connect only one Bluetooth
device in the MAIN unit. You cannot
connect Bluetooth device to the OTHER
unit.
-- WIRELESS PARTY LINK connection
is only supported on Android devices.
(WIRELESS PARTY LINK connection
may not be supported depending on the
connected device specifications or OS.)
-- Removable/detachable Bluetooth
devices (ex. Dongle etc.) will not support
WIRELESS PARTY LINK connection.
-- When WIRELESS PARTY LINK is
connected, Bluetooth connection is not
available in status of deleting.
-- If you connect WIRELESS PARTY
LINK while you are playing connected
Bluetooth device, it may be reconnected
again, depending on phone specification.
Troubleshooting 57
Troubleshooting
General
Problem
The unit does not work
properly.
Cause & Solution
yy Turn off the power of this unit and the connected external device (TV, Woofer,
DVD-player, Amplifier, etc.) and turn them on again.
yy Disconnect the power cord of this unit and the connected external device (TV,
Woofer, DVD-player, Amplifier, etc.) and then try connecting again.
yy Previous setting may not be saved when device power is shut off.
yy The power cord is not plugged in. Plug in the power cord.
No Power.
yy Select the appropriate video input mode on the TV so the picture from the
unit appears on the TV screen.
5
yy Connect the video cables securely to both the TV and unit.
Troubleshooting
No picture
yy Check whether electricity failed.
Check the condition by operating electronic devices using the same AC
outlet.
No sound.
yy Check whether you select right function.
Press function button and check the selected function.
The DVD picture quality
is poor
yy Clean the disc using a soft cloth with outward strokes.
yy Insert a disc.
A DVD/CD will not play
yy Insert a playable disc (check the disc type, colour system and regional code).
yy Place the disc with the label or printed side facing upwards.
yy Enter your password or change the rating level.
Humming noise heard while yy Clean the disc using a soft cloth with outward strokes.
a DVD or CD is playing
yy Move unit and audio components further away from your TV.
yy The antenna is positioned or connected poorly.
Connect the antenna securely.
Radio stations cannot be
tuned in properly.
yy The signal strength of the radio station is too weak.
Tune to the station manually.
yy No stations have been preset or preset stations have been cleared
(when tuning by scanning preset channels).
Preset some radio stations, see page 45 for details.
yy An unplayable disc is inserted. Check the playable disc.
The unit does not start
playback.
yy No disc is inserted. Insert a disc.
yy The disc is dirty. Clean the disc. (Page 63)
yy The disc is inserted upside down.
Place the disc with the label or printed side facing upwards.
58 Troubleshooting
Problem
Cause & Solution
yy The remote control is too far from the unit.
Operate the remote control within about 7 m (23 feet).
The remote control does yy There is an obstacle in the path of the remote control and the unit.
not work properly.
Remove the obstacle.
yy The batteries in the remote control are exhausted.
Replace the batteries with new ones.
yy Check the light effects by pressing LIGHTING (Page 51).
No speaker light.
LG Sound Sync does not
work.
The AUTO POWER
function does not work
yy Check whether your LG TV supports LG Sound Sync.
yy Check connection of LG Sound Sync.
yy Check sound setting of your TV and this unit.
yy Check connection of the external device such as TV or Bluetooth device.
yy Depending on the connected device, this function may not operate.
5
Troubleshooting
NOTES to release Demo mode
Problem
Can not change input source with ‘F’ key such as
BT (Bluetooth), USB etc. and only DEMO mode is
showing in the display.
Remote Control does not work properly.
Cause & Solution
yy Press ‘DEMO’ Key on the unit for 15 seconds.
Appendix 59
Controlling a TV with
the Supplied Remote
Control
You can control your TV using the buttons below.
By pressing
1 (TV POWER)
AV / INPUT
Turn the TV on or off.
Switch the TV’s input source
between the TV and other
input sources.
Depending on the unit being connected, you
may not be able to control your TV using some
of the buttons.
You can operate your TV with the supplied remote
control.
If your TV is listed in the table below, set the
appropriate manufacturer code.
1. While holding down 1 (TV POWER) on the
remote control, and press the manufacturer code
for your TV with the numerical buttons on the
remote control (see the table below).
Manufacturer
Code Number
LG
1(Default), 2
Zenith
3, 4
GoldStar
1, 2
Samsung
6, 7
Sony
8, 9
Hitachi
4
2. Release the 1 (TV POWER) on the remote
control to complete setting.
Depending on your TV, some or all buttons may not
function on the TV, even after entering the correct
manufacturer code. When you replace the batteries
of the remote, the code number you have set may be
reset to the default setting. Set the appropriate code
number again.
6
Appendix
,,Note
You can
Setting up the remote to control
your TV
60 Appendix
Area Code List
Choose an area code from this list.
Area
Afghanistan
6
Code Area
AF Fiji
Code Area
Monaco
FJ
Code Area
MC Singapore
Code
SG
Appendix
Argentina
AR
Finland
FI
Mongolia
MN Slovak Republic
SK
Australia
AU
France
FR
Morocco
MA Slovenia
SI
Austria
AT
Germany
DE
Nepal
NP
South Africa
ZA
Belgium
BE
Great Britain
GB
Netherlands
NL
South Korea
KR
Bhutan
BT
Greece
GR
Antilles
AN
Spain
ES
Bolivia
BO
Greenland
GL
New Zealand
NZ
Sri Lanka
LK
Brazil
BR
Hong Kong
HK
Nigeria
NG
Sweden
SE
Cambodia
KH
Hungary
HU
Norway
NO
Switzerland
CH
Canada
CA
India
IN
Oman
OM Taiwan
Chile
CL
Indonesia
ID
Pakistan
PK
Thailand
TH
China
CN
Israel
IL
Panama
PA
Turkey
TR
Colombia
CO
Italy
IT
Paraguay
PY
Uganda
UG
Congo
CG
Jamaica
JM
Philippines
PH
Ukraine
UA
Costa Rica
CR
Japan
JP
Poland
PL
United States
US
Croatia
HR
Kenya
KE
Portugal
PT
Uruguay
UY
Czech Republic
CZ
Kuwait
KW Romania
RO
Uzbekistan
UZ
Denmark
DK
Libya
LY
Vietnam
VN
Ecuador
EC
Luxembourg
Zimbabwe
ZW
Egypt
EG
El Salvador
Ethiopia
LU
Russian
Federation
RU
Malaysia
MY
Saudi Arabia
SA
SV
Maldives
MV Senegal
ET
Mexico
MX
SN
TW
Appendix 61
Language code List
Use this list to input your desired language for the following initial settings: [Disc Audio],
[Disc Subtitle] and [Disc Menu].
Language
Afar
Code Language
6565 French
Code Language
7082 Lithuanian
Code Language
7684 Sindhi
Code
8368
Afrikaans
6570 Frisian
7089 Macedonian
7775 Singhalese
8373
Albanian
8381 Galician
7176 Malagasy
7771 Slovak
8375
8376
6577 Georgian
7565 Malay
Arabic
6582 German
6869 Malayalam
7776 Spanish
6983
Armenian
7289 Greek
6976 Maori
7773 Sudanese
8385
Assamese
6583 Greenlandic
7576 Marathi
7782 Swahili
8387
Aymara
6588 Guarani
7178 Moldavian
7779 Swedish
8386
Azerbaijani
6590 Gujarati
7185 Mongolian
7778 Tagalog
8476
Bashkir
6665 Hausa
7265 Nauru
7865 Tajik
8471
Basque
6985 Hebrew
7387 Nepali
7869 Tamil
8465
Bengali; Bangla
6678 Hindi
7273 Norwegian
7879 Telugu
8469
Bhutani
6890 Hungarian
7285 Oriya
7982 Thai
8472
Bihari
6672 Icelandic
7383 Panjabi
8065 Tonga
8479
Breton
6682 Indonesian
7378 Pashto, Pushto
8083 Turkish
8482
Bulgarian
6671 Interlingua
7365 Persian
7065 Turkmen
8475
Burmese
7789 Irish
7165 Polish
8076 Twi
8487
Byelorussian
6669 Italian
7384 Portuguese
8084 Ukrainian
8575
Chinese
9072 Japanese
7465 Quechua
8185 Urdu
8582
Croatian
7282 Kannada
7578 Rhaeto-Romance
8277 Uzbek
8590
Czech
6783 Kashmiri
7583 Rumanian
8279 Vietnamese
8673
Danish
6865 Kazakh
7575 Russian
8285 Volapük
8679
Dutch
7876 Kirghiz
7589 Samoan
8377 Welsh
6789
English
6978 Korean
7579 Sanskrit
8365 Wolof
8779
Esperanto
6979 Kurdish
7585 Scots Gaelic
7168 Xhosa
8872
Estonian
6984 Laothian
7679 Serbian
8382 Yiddish
7473
Faroese
7079 Latin
7665 Serbo-Croatian
8372 Yoruba
8979
Fiji
7074 Latvian, Lettish
7686 Shona
8378 Zulu
9085
Finnish
7073 Lingala
7678
6
Appendix
Ameharic
7783 Slovenian
62 Appendix
Trademarks and
Licenses
All other trademarks are trademarks of their
respective owners.
Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio, and the double-D symbol
are trademarks of Dolby Laboratories.
The terms HDMI and HDMI High-Definition
Multimedia Interface, and the HDMI logo are
trademarks or registered trademarks of HDMI
Licensing LLC in the United States and other
countries.
6
Appendix
“DVD Logo” is a trademark of DVD Format/Logo
Licensing Corporation.
The Bluetooth® word mark and logos are
registered trademarks owned by the Bluetooth
SIG, Inc. and any use of such marks by LG
Electronics is under license.
Other trademarks and trade names are those of
their respective owners.
Notes on Copyrights
yy This product incorporates copyright protection
technology that is protected by U.S. patents
and other intellectual property rights. Use of
this copyright protection technology must be
authorized by Rovi, and is intended for home and
other limited viewing uses only unless otherwise
authorized by Rovi. Reverse engineering or
disassembly is prohibited.
yy Under the U.S. Copyright laws and Copyright
laws of other countries, unauthorized recording,
use, display, distribution, or revision of television
programs, videotapes, BD-ROM discs, DVDs, CDs
and other materials may subject you to civil and/or
criminal liability.
Appendix 63
Maintenance
Handling the Unit
When shipping the unit
Notes on Discs
Handling Discs
Never stick paper or tape on the disc.
Storing Discs
Please save the original shipping carton and packing
materials. If you need to ship the unit, for maximum
protection, re-pack the unit as it was originally
packed at the factory.
Keeping the exterior surfaces clean
After playing, store the disc in its case. Do not
expose the disc to direct sunlight or sources of heat
and never leave it in a parked car exposed to direct
sunlight.
Do not use volatile liquids such as insecticide spray
near the unit. Wiping with strong pressure may
damage the surface. Do not leave rubber or plastic
products in contact with the unit for a long period
of time.
Cleaning Discs
Cleaning the unit
Fingerprints and dust on the disc can cause poor
picture quality and sound distortion. Before playing,
clean the disc with a clean cloth. Wipe the disc from
the center to out.
To clean the player, use a soft, dry cloth. If the
surfaces are extremely dirty, use a soft cloth lightly
moistened with a mild detergent solution. Do not use
strong solvents such as alcohol, benzine, or thinner,
as these might damage the surface of the unit.
Do not use strong solvents such as alcohol, benzine,
thinner, commercially available cleaners, or anti-static
spray intended for old vinyl records.
Maintaining the Unit
6
Appendix
The unit is a high-tech, precision device. If the optical
pick-up lens and disc drive parts are dirty or worn,
the picture quality could be diminished. For details,
please contact your nearest authorized service
center.
64 Appendix
General specifications
General
Power requirements
Refer to the main label on the unit.
Power consumption
Refer to the main label on the unit.
Networked standby : 0,5 W
Dimensions (W x H x D)
Operating temperature
Operating humidity
(If all network ports are activated.)
Approx. 330.0 mm x 925.0 mm x 360.0 mm
5 °C to 35 °C
5 % to 60 % RH
Inputs
Digital audio in (OPTICAL IN)
Analog audio in (AUX IN 2)
3.0 V (p-p), Optical jack x 1
2.0 Vrms (1 kHz, 0 dB), 600 Ω, RCA jack (L, R) x 1
Portable in (AUX IN 1)
1.0 Vrms (3.5 mm stereo jack) x 1
Microphone (MIC 1/2)
Sensitivity 20 mV (1 kHz), 6.3 mm jack x 2
Tuner
FM Tuning Range
6
87.5 to 108.0 MHz or 87.50 to 108.00 MHz
System
Appendix
Frequency Response
Signal-to-noise ratio
Dynamic range
Bus Power Supply (USB)
Available Digital Input Audio
Sampling Frequency
Available Digital Input Audio format
220 to 20,000 Hz
More than 75 dB
More than 80 dB
5 V 0 500 mA
32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
Dolby Audio, PCM
Amplifier (RMS Output power)
Total output
Front
Sub Woofer
1,100 W RMS
320 W RMS × 2 (4 Ω at 1kHz, 25 % THD)
460 W RMS (3 Ω at 200Hz, 25 % THD)
yy Design and specifications are subject to change without notice.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising