LG | 55XS4F-B | Owner's Manual | LG 55XS4F-B Instruktionsbogen

LG 55XS4F-B Instruktionsbogen
OWNER’S MANUAL
LG Digital Signage
(MONITOR SIGNAGE)
Please read this manual carefully before operating your set and retain it
for future reference.
49XS4F
55XS4F
www.lg.com
Copyright © 2019 LG Electronics Inc. All Rights Reserved.
2
_Index
ENGLISH
TABLE OF CONTENTS
SAFETY PRECAUTION...................3
-- Precautions In Installing the Product......................3
-- Precautions to the AC Adapter and Electrical
Power.......................................................................................5
-- Precautions In Moving the Product.........................7
-- Precautions In Using the Product.............................7
-- Mounting on a Wall..........................................................8
ASSEMBLY AND PREPARATION...9
-- Optional Accessories........................................................9
-- Buttons................................................................................10
-- Portrait Layout.................................................................11
-- Attaching and removing the LG Logo Bracket
..................................................................................................11
-- Installing on a Wall.........................................................13
REMOTE CONTROL..................... 16
MAKING CONNECTIONS............ 18
-- Connecting to a PC.......................................................18
-- External Device Connection......................................18
-- Connecting Multiple Monitors.................................20
-- Using the Input List.......................................................21
TROUBLESHOOTING................... 22
PRODUCT SPECIFICATIONS....... 25
LICENSES..................................... 28
3
_Index
ENGLISH
WARNING: This equipment is compliant with Class A of CISPR 32. In a residential environment this equipment may
cause radio interference.
SAFETY PRECAUTION
Please read these safety precautions carefully before using the product.
WARNING
If you ignore the warning message, you may be seriously injured or there is a possibility of accident or death.
CAUTION
If you ignore the caution message, you may be slightly injured or the product may be damaged.
WARNING
•• Indoor Use Only.
Precautions In Installing the Product
WARNING
•• Keep away from heat sources like electrical heaters.
-- Electrical shock, fire, malfunction, or deformation may occur.
•• Keep the packing anti-moisture material or vinyl packing out of the reach of children.
-- Anti-moisture material is harmful if swallowed. If swallowed by mistake, force the patient to vomit and visit the
nearest hospital. Additionally, vinyl packing can cause suffocation. Keep it out of the reach of children.
•• Do not put heavy objects on the product or sit upon it.
-- If the product collapses or is dropped, you may be injured. Children must pay particular attention.
•• Do not leave the power or signal cable unattended on the pathway.
-- The passerby can trip or fall, which can cause electrical shock, fire, product breakdown, or injury.
•• Install the product in a neat and dry place.
-- Dust or moisture can cause electrical shock, fire or product damage.
•• If you can smell smoke or other odors or hear a strange sound unplug the power cord and contact the service center.
-- If you continue to use without taking proper measures, electrical shock or fire can occur.
4
_Index
ENGLISH
•• If you dropped the product or the case is broken, turn off the product and unplug the power cord.
-- If you continue to use without taking proper measures, electrical shock or fire can occur. Contact the service center.
•• Do not drop an object on or apply impact to the product. Do not throw any toys or objects on the product screen.
-- It can cause injury to human, problem to product and damage the display.
•• Do not let the product fall or drop when connecting it with an external device.
-- This may cause injury and/or damage to the product.
•• When connecting it to a game device, keep a distance of four times the diagonal measurement of the screen from the
device.
-- If the product falls because of the short cable, this may cause injury and/or damage to the product.
•• Leaving a fixed image on the screen for a long time may cause damage to the screen and cause image retention.
To use the product for a long period of time, use a screen saver on the PC or utilize the residual image prevention
function on the product, and when the product is not used, turn off the power. Image retention and related problems
are not covered by the warranty on this product.
•• Do not install this product on a wall where there is high risk of exposure to oil fumes or mist.
-- This may damage product and cause it to fall.
CAUTION
•• Make sure the product ventilation holes are not blocked. Install the product in a suitably wide place (more than
100 mm from the wall).
-- If you install the product too close to the wall, it may be deformed or fire can break out due to internal heat.
•• Do not block the ventilation hole of the product by a tablecloth or curtain.
-- The product can be deformed or fire can break out due to overheating inside the product.
•• Install the product on a flat and stable place that has no risk of dropping the product.
-- If the product is dropped, you may be injured or the product may be broken.
•• Install the product where no EMI occurs.
•• Keep the product away from direct sunlight.
-- The product can be damaged.
•• If you install the product in a place that does not meet the recommended conditions, this may cause serious damage
to the product’s picture quality, life cycle, and appearance. Please check with LG or a qualified installer before
installing. This caution applies to a place where there is an abundance of fine dust or oil mist, chemical substances are
used, the temperature is very high or low, the humidity is very high, or the product is likely to remain turned on for a
long period of time (airport and train station), failure to do so will invalidate the warranty.
•• Do not install the product in an area with poor ventilation (e.g.on a bookshelf, in a closet) or outside and avoid placing
on cushions or carpets.
•• In addition, do not install it where there are heating objects such as lighting equipment.
5
WARNING
_Index
ENGLISH
Precautions to the AC Adapter and Electrical Power
•• If water or any foreign substance goes inside the product (TV, monitor, power cord, or AC adapter), disconnect the
power cord immediately and contact the service center.
-- Otherwise, this may cause a fire or electric shock due to damage to the product.
•• Do not touch the power plug or AC adapter with wet hands. If the pins of the plug are wet or dusty, wipe and dry
them before use.
-- Otherwise, this may cause a fire or electric shock.
•• Make sure to completely insert the power cord into the AC adapter.
-- If loosely connected, the poor connection may cause a fire or electric shock.
•• Be sure to use power cords and AC adapters provided or approved by LG Electronics, Inc.
-- The use of non-approved products may cause a fire or electric shock.
•• When unplugging the power cord, always pull it by the plug. Do not bend the power cord with excessive force.
-- The power line can be damaged, which may cause electric shock or fire.
•• Be careful not to step or place heavy objects (electronic appliances, clothing, etc.) on the power cord or AC adapter.
Be careful not to damage the power cord or AC adapter with sharp objects.
-- Damaged power cords may cause a fire or electric shock.
•• Never disassemble, repair or modify the power cord or AC adapter.
-- This may cause a fire or electric shock.
•• Make sure to connect the power cable to the grounded current.
-- You may be electrocuted or injured.
•• Use the rated voltage only.
-- The product can be damaged, or you may be electrocuted.
•• In the presence of thunder and lightning, never touch the power cord and signal cable because it can be very
dangerous.
-- It can cause electric shock.
•• Do not connect several extension cords, electrical appliances, or electrical heaters to a single outlet. Use a power strip
with a grounding terminal designed for exclusive use with the computer.
-- A fire can break out due to overheating.
6
_Index
ENGLISH
•• Do not touch the power plug with wet hands. Additionally, if the cord pin is wet or covered with dust, dry the power
plug completely or wipe dust off.
-- You may be electrocuted due to excess moisture.
•• If you don’t intend to use the product for a long time, unplug the power cable from the product.
-- Covering dust can cause a fire, or insulation deterioration can cause electric leakage, electric shock or fire.
•• Fix the power cable completely.
-- If the power cable is not fixed completely, a fire can break out.
•• Do not insert a conductor (like a metal chopstick) into one end of the power cable while the other end is connected
to the input terminal on the wall. Additionally, do not touch the power cable right after plugging into the wall input
terminal.
-- You may be electrocuted.
•• The appliance coupler is used as the disconnect device.
•• Please make sure the device is installed near the wall outlet to which it is connected and that the outlet is easily
accessible.
•• As long as this unit is connected to the AC wall outlet, it is not disconnected from the AC power source even if the
unit is turned off.
CAUTION
•• Be sure to keep the outlet, AC adapter, and pins of the power plug clean from dust and etc.
-- This may cause a fire.
•• Do not unplug the power cord while the product is in use.
-- Electrical shock can damage the product.
•• Use only the power cord supplied with the unit. If you use another power cord, make sure that it is certified by the
applicable national standards when not provided by the supplier. If the power cable is faulty in any way, please contact
the manufacturer or the nearest authorized repair service provider for a replacement.
7
WARNING
_Index
ENGLISH
Precautions In Moving the Product
•• Make sure to turn off the product.
-- You may be electrocuted or the product can be damaged.
•• Make sure to remove all cables before moving the product.
-- You may be electrocuted or the product can be damaged.
•• Make sure the panel faces forward and hold it with both hands to move. If you drop the product, the damaged
product can cause electric shock or fire. Contact an authorized the service center for repair.
•• Make sure the product is turned off, unplugged, and all cables have been removed. It may take 2 or more people to
carry larger apparatus. Do not press against or put stress on the front panel of the apparatus.
CAUTION
•• Do not shock the product when moving it.
-- You may be electrocuted or the product can be damaged.
•• Do not dispose the product-packing box. Use it when you move.
Precautions In Using the Product
WARNING
•• Do not disassemble, repair or modify the product at your own discretion.
-- Fire or electric shock accident can occur.
-- Contact the service center for check, calibration or repair.
•• When the display is to be left unattended for an extended period of time, unplug it from the wall outlet.
•• Keep the product away from water.
-- Fire or electric shock accident can occur.
•• Do not shock or scratch the front and sides of the screen with metallic objects.
-- Otherwise, it may cause damage to the screen.
•• Avoid high temperatures and humidity.
8
_Index
ENGLISH
CAUTION
•• Do not put or store inflammable substances near the product.
-- There is a danger of explosion or fire due to careless handling of the inflammable substances.
•• When cleaning the product, unplug the power cord and scrub gently with a soft cloth to prevent scratching. Do not
clean with a wet cloth or spray water or other liquids directly onto the product. An electric shock may occur. (Do not
use chemicals such as benzene, paint thinners, or alcohol.)
•• Take a rest from time to time to protect your vision.
•• Keep the product clean at all times.
•• Take a comfortable and natural position when working with a product to relax the muscles.
•• Take a regular break when working with a product for a long time.
•• Do not press strongly upon the panel with a hand or sharp object such as nail, pencil, or pen, or make a scratch on it.
•• Keep the proper distance from the product.
-- Your vision may be impaired if you look at the product too closely.
•• Set the appropriate resolution and clock by referring to the User’s Guide.
-- Your vision can be impaired.
•• Use authorized detergent only when cleaning the product. (Do not use benzene, thinner, or alcohol.)
-- Product can be deformed.
•• Do not expose to dripping or splashing and do not place objects filled with liquids, such as vases, cups, etc. on or over
the apparatus (e.g. on shelves above the unit).
•• Batteries should not be exposed to excessive heat. For example, keep away from direct sunlight, open fireplace, and
electric heaters.
•• Do NOT place non-rechargeable batteries in charging device.
•• Using headsets (earphones) for a long time or listening loudly can cause damage to your hearing.
•• Spray water onto a soft cloth 2 to 4 times, and use it to clean the front frame; wipe in one direction only. Too much
moisture may cause staining.
WATER
CHEMICALS
•• Do not use products using high voltage around the Monitor. (e.g., a bug zapper)
-- Monitor may have malfunction as its electrical shock.
Mounting on a Wall
•• Do NOT install this product by yourself as you may injure yourself or cause damage to product. Please contact service
personnel authorised by manufacturer.
9
_Index
CAUTION
ENGLISH
ASSEMBLY AND PREPARATION
•• Always use genuine components to ensure safety and product performance.
•• The product warranty will not cover damage or injury caused by the use of counterfeit components.
NOTE
•• The accessories provided with your product may vary depending on the model or region.
•• Product specifications or contents in this manual may be changed without prior notice due to upgrade of product
functions.
•• SuperSign Software & Manual
-- Downloading from the LG Electronics website.
-- Visit the LG Electronics website (http://partner.lge.com) and download the latest software for your model.
•• The warranty will not cover any damage caused by using the product in an excessively dusty environment.
Optional Accessories
Without prior notice, optional accessories are subject to change to improve the performance of the product, and new
accessories may be added. The illustrations in this manual may differ from the actual product and accessories.
Wi-Fi Dongle kit
AN-WF500
NOTE
•• Optional accessories are available for some models. If necessary, please purchase them separately.
•• Please turn off the power before connecting or removing the Wi-Fi dongle kit.
10
The image may be different according to the model.
_Index
ENGLISH
Buttons
Screen Buttons
Adjusts up and down.
Moves left and right.
Displays the current signal and mode.
Accesses the main menus, or saves your input and exits the menus.
Change the input signal.
Turns the power on or off.
NOTE
•• You can adjust the volume by using the remote control.
11
When installing in a portrait layout, rotate the monitor clockwise 90 degrees (when facing the screen).
_Index
ENGLISH
Portrait Layout
Attaching and removing the LG Logo Bracket
Removing the LG Logo Bracket
1 Lay a clean cloth on the floor, and then put the monitor on it with the screen face down. Using a screwdriver,
remove the screw that secures the LG Logo Bracket to the bottom rear of the monitor.
LG Logo Bracket
2 After removing the screw, remove the LG Logo Bracket. When re-attaching the LG Logo Bracket, repeat the process
in reverse order.
12
Attaching the LG Logo Bracket on the left side
remove the screw that secures the LG Logo Bracket to the bottom rear of the monitor.
_Index
ENGLISH
1 Lay a clean cloth on the floor, and then put the monitor on it with the screen face down. Using a screwdriver,
2 After removing the screw, remove the LG Logo Bracket. Align with the hole on the left side to attach the LG Logo
Bracket with a screw.
13
For proper ventilation, allow a clearance of 100 mm on each side and from the wall. Detailed installation instructions
are available from your dealer, see the optional Tilt Wall Mounting Bracket Installation and Setup Guide.
_Index
ENGLISH
Installing on a Wall
100 mm
100 mm
100 mm
100 mm
100 mm
To install your monitor on a wall, attach a wall mounting bracket (optional part) to the back of the monitor.
Make sure that the wall mounting bracket is securely fixed to the monitor and to the wall.
1 Use only screws and wall mounting brackets that conform to VESA standards.
2 Screws which are longer than standard length may damage the inside of the monitor.
3 A non-VESA standard screw may damage the product and cause the monitor to fall. LG Electronics is not liable for
any accidents related to the use of non-standard screws.
4 Please use VESA standard as below.
•• 785 mm and above
* Fixing screws: Diameter 6.0 mm x Pitch 1.0 mm x Length 12 mm
785 mm
14
_Index
ENGLISH
CAUTION
•• Disconnect the power cord before moving or installing the monitor to avoid risk of electric shock.
•• If you install the monitor on a ceiling or slanted wall, it may fall and result in injury. Use an authorized LG wall mount
and contact your local dealer or qualified personnel to assist with the installation.
•• Do not over tighten the screws as this may damage the monitor and void your warranty.
•• Use only screws and wall mounting brackets that meet the VESA standard. Any damage or injuries caused by misuse
or use of improper accessories are not covered by the warranty.
NOTE
•• The wall mount kit includes the installation guide and all necessary parts.
•• The wall mounting bracket is optional. You can obtain additional accessories from your local dealer.
•• The length of screws required may differ depending on the wall mount. Be sure to use the correct length.
•• For more information, please refer to the guide provided with the wall mount.
Securing the monitor to a wall (optional)
1 Insert and tighten the eyebolts, or brackets and bolts on the back of the monitor.
-- If there are already bolts inserted in the eyebolts’ position, remove the other bolts first.
2 Mount the wall brackets with the bolts to the wall. Match the location of the wall bracket and the eyebolts on the
rear of the monitor.
3 Connect the eyebolts and wall brackets tightly with a sturdy cord.
Make sure the securing cord is horizontal with the flat surface.
15
CAUTION
•• Make sure that children do not climb on or hang from the monitor.
NOTE
•• Use a platform or cabinet that is large and strong enough to support the monitor securely.
•• Brackets, bolts, and cords are sold separately. You can obtain additional accessories from your local retail store.
•• The illustration shows a general example of installation and may look different from the actual product.
_Index
•• If the monitor is not positioned in a sufficiently stable location, there is a danger that it will fall. Many injuries,
particularly to children, can be avoided by taking simple precautions such as:
-- Using cabinets or stands recommended by the manufacturer.
-- Only using furniture that can safely support the monitor.
-- Ensuring the monitor is not overhanging the edge of the supporting furniture.
-- Not placing the monitor on tall furniture (for example, cupboards or bookcases) without anchoring both the
furniture and the monitor to a suitable support.
-- Not placing cloth or other materials between the monitor and supporting furniture.
-- Educating children about the dangers of climbing on furniture to reach the monitor or its controls.
ENGLISH
WARNING
16
_Index
ENGLISH
REMOTE CONTROL
The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully to
use the monitor correctly. To install batteries, open the battery cover, place batteries (1.5 V AAA) matching
and
terminals to the labels inside the compartment, and close the battery cover. To remove the batteries, perform the
installation actions in reverse. The illustrations may differ from the actual accessories.
CAUTION
•• Do not mix old and new batteries, as this may damage the remote control.
•• Be sure to point the remote control toward the remote control sensor on the monitor.
•• Some features of the remote control may not be supported in certain models.
•• The product’s internal and external batteries should not be exposed to excessive heat such as direct sunlight, fire, or
the like.
(POWER) Turns the monitor on or off.
Turns the monitor on.
Turns the monitor off.
Adjusts the brightness of the picture to reduce
energy consumption.
(INPUT) Selects the input mode.
This function is not supported in this model.
Toggles between numerical and alphabetical.
Number and Alphabet buttons Enters numerical or alphabetical
characters depending upon the setting.
Deletes the entered numerical or alphabetical character.
Volume Up/Down Button Adjusts the volume.
Selects the Aspect Ratio mode.
Automatically adjusts picture position and minimizes image
instability (available for RGB input only).
(MUTE) Mutes all sounds.
Adjusts the brightness of the display.
This function is not supported in this model.
17
_Index
Selects menus or options and confirms your input.
(BACK) Allows you to move back one step in the user interaction function.
Quit all OSD tasks and applications.
Allows you to control various multimedia devices to enjoy
multimedia simply by using the remote control through the SimpLink menu.
Selects the TILE Mode.
When the Picture ID number matches the Set ID number,
you can control whichever monitor you want in multi-display format.
USB Menu Control Buttons Controls media playback.
ENGLISH
Selects the Picture Mode.
(HOME) Activates the Launcher.
Enters the White Balance menu.
(SETTINGS) Accesses the main menus or saves your input and exit menus.
This function is not supported in this model.
Navigation Buttons Scrolls through menus or options.
18
_Index
ENGLISH
MAKING CONNECTIONS
You can connect various external devices to your monitor. Change the input mode and select the external device you
want to connect.
For more information about external device connections, see the user manual provided with each device.
Connecting to a PC
Some of the cables are not provided.
This monitor supports the
*
* feature.
: a feature that enables a PC to recognize devices attached by the user without device configuration or
user intervention when powering up.
External Device Connection
Connect a HD receiver, DVD, or VCR player to the monitor and select an appropriate input mode.
Some of the cables are not provided. For the best picture and sound quality, connecting external devices to your
monitor using HDMI cables is recommended.
19
CAUTION
•• Connect the signal input cable and tighten it by turning the screws clockwise.
•• Do not press the screen with your finger for a prolonged period as this may result in temporary distortion on the
screen.
•• Avoid displaying static images on the screen for a long period of time to prevent image retention. Use a screensaver
if possible.
•• A wireless communication device near your monitor can affect the image.
_Index
•• For the best image quality, using the monitor with HDMI connection is recommended.
•• To comply with the standard specifications of the product, use a shielded interface cable with a ferrite core, such as a
DVI-D cable.
•• If you turn the monitor on when the set is cold, the screen may flicker. This is normal.
•• Sometimes red, green, or blue spots may appear on the screen. This is normal.
•• Use a High-Speed HDMI®/™ cable.
•• Use a certified cable with the HDMI logo attached. If you do not use a certified HDMI cable, the screen may not
display or a connection error may occur.
•• Recommended HDMI Cable Types
-- High-Speed HDMI®/™ Cable
-- High-Speed HDMI®/™ Cable with Ethernet
•• If you cannot hear any sound in HDMI mode please check your PC settings. Some PCs require you to manually change
the default audio output to HDMI.
•• If you want to use HDMI-PC mode, you must set your PC/DTV to PC mode.
•• You may experience compatibility issues if you use HDMI-PC mode.
•• Make sure the power cable is disconnected.
•• If you connect a gaming device to the monitor, use the cable provided with the gaming device.
•• It is recommended to use the speakers that are provided as optional accessories.
•• High Speed HDMI®/™ cables transmit a HD signal up to 1080p and higher.
ENGLISH
NOTE
20
_Index
ENGLISH
Connecting Multiple Monitors
To use multiple products, first connect an external device to the product, connect one end of the supported signal input
cable to the
connector of the product, and then connect the other end to the connector of the product you wish
to connect to.
DP IN
DP OUT
DP IN
DP OUT
DP IN
DP OUT
HDMI IN
DP OUT
DP IN
DP OUT
DP IN
DP OUT
DVI IN
DP OUT
DP IN
DP OUT
DP IN
DP OUT
RS-232C RS-232C
IN
OUT
RS-232C RS-232C
IN
OUT
RS-232C RS-232C
IN
OUT
NOTE
•• If you set the tile mode using DVI-D or HDMI, you will not be able to watch HDCP-encrypted content.
•• If the signal cable between the product and your PC is too long, make sure to use the Booster or optical cable.
•• DP Cable - Use a DP cable that is certified to DP 1.1a standard or higher.
21
DVI-D
DISPLAYPORT
_Index
(HOME)
•• HDMI1 HDMI2
ENGLISH
Using the Input List
22
_Index
ENGLISH
TROUBLESHOOTING
No image is displayed.
Problem
Action
Is the product power cord connected?
•• Check if the power cord is correctly plugged into the power outlet.
Does the “Invalid Format” message
appear?
•• The signal from the PC (Graphics card) is out of the vertical or
horizontal frequency range of the product. Adjust the frequency range
by referring to the Specifications in this manual.
Does the “No Signal” message appear?
•• The signal cable between PC and product is not connected. Check the
signal cable.
•• Access the input menu to check the input signal.
The Unknown Product message appears when the product is connected.
Problem
Did you install the driver?
Action
•• Check if the
function is supported by referring to the
graphics card user manual.
The screen image looks abnormal.
Problem
Action
Is the screen position wrong?
•• Check if the graphics card resolution and frequency are supported by
the product. If the frequency is out of range, set to the recommended
resolution in the (Control Panel) (Display) (Setting) menu. (The
settings may differ depending on your operating system.)
The screen is displayed abnormally.
•• The proper input signal is not connected to the signal port. Connect
the signal cable that matches with the source input signal.
23
After-image appears on the product.
After-image appears when the product is
turned off.
•• If you use a fixed image for a long time, the pixels may be damaged.
Use the screen-saver function.
•• When a dark image is displayed on the screen after an image with high
contrast (black and white or gray), this may cause image sticking. This
is normal for LCD screen products.
The audio function does not work.
Problem
Action
No sound?
•• See if the audio cable is connected properly.
•• Adjust the volume.
•• See if the sound is set properly.
Sound is too dull.
•• Select the appropriate equalizer sound.
Sound is too low.
•• Adjust the volume.
Screen color is abnormal.
Problem
Action
Screen has poor color resolution (16
colors).
•• Set the number of colors to more than 24 bits (true color). Select
(Control Panel) (Display) (Settings) (Color Table) in Windows.
(The settings may differ depending on your operating system.)
Screen color is unstable or mono-colored.
•• Check the connection status of the signal cable. Or, re-insert the PC
graphics card.
Do black spots appear on the screen?
•• Several pixels (red, green, blue, white, or black color) may appear on
the screen, which can be attributable to the unique characteristics of
the LCD panel. This is not a malfunction of the LCD.
The operation does not work normally.
Problem
The power suddenly turned off.
Action
•• Is the Timer set?
•• Check the power control settings. Power interrupted.
_Index
Action
ENGLISH
Problem
24
_Index
ENGLISH
CAUTION
•• Image sticking does not occur when using constantly changing images but may occur when using a fixed image for an
extended period of time. Therefore, it is recommended that you use the instructions below to decrease the likelihood
of image sticking occurring when using a fixed image. It is recommended that you change the screen at least once
every 12 hours at the very minimum; if done more frequently, the prevention of image sticking is more effective.
Recommended operating conditions
1 Change the background and the character colors using the same time interval.
ID: UPM 123
PW: ****
ID: UPM 123
PW: ****
When changing colors, using complementary colors helps to prevent image sticking.
Glass
BM
CF
BM
CF
BM
CF
CF
OC
PI
LC
PI
TFT Layers
Glass
ITO or MoTi Pixel Layer
2 Change the image using the same time
I D :interval.
UPM123
PW : ******
I D : UPM123
PW : ******
Make sure that the characters or images before changing the image remain in the same location after changing the
image.
What is image sticking?
When the LCD panel displays a static image for an extended period of time, it can cause a voltage difference between
the electrodes that operate the liquid crystals. When the voltage difference between the electrodes builds up over
time, liquid crystals have a tendency to remain aligned in one direction. During this process, a previously displayed image
remains visible. This phenomenon is referred to as image sticking.
25
LCD screen
Video signal
Screen type
Thin Film Transistor (TFT)
Liquid Crystal Display (LCD) Screen
Maximum resolution
1920 x 1080 @ 60 Hz
-- This may not be supported on some OS or graphics card types.
Recommended resolution
1920 x 1080 @ 60 Hz
-- This may not be supported on some OS or graphics card types.
Horizontal frequency
HDMI / DVI-D / DISPLAYPORT: 30 kHz to 83 kHz
Vertical frequency
HDMI / DVI-D / DISPLAYPORT: 56 Hz to 60 Hz
Synchronization
Separate Sync, Digital
Input / Output ports
Embedded battery
Applied
_Index
The product specifications below may be changed without prior notice due to upgrade of product functions.
“ ” refers to alternating current (AC), and “
” refers to direct current (DC).
ENGLISH
PRODUCT SPECIFICATIONS
26
Pixel pitch
0.5593 mm (H) x 0.5593 mm (V)
Rated power
AC 100-240 V ~ 50/60 Hz 3.9 A
Power consumption
On Mode: 345 W (Typ.)
Sleep Mode (DVI-D, HDMI, DISPLAYPORT): ≤ 0.5 W
Off Mode: ≤ 0.5 W
Operating Temperature
0 °C to 30 °C (Direct Sunlight)
0 °C to 40 °C (Without Direct Sunlight)
Operating Humidity
10 % to 80 %
Storage Temperature
-20 °C to 60 °C
Storage Humidity
5 % to 85 %
Installation site
Indoor
_Index
ENGLISH
49XS4F
LCD screen
Power
Environmental
Conditions
Dimensions (Width x Depth x Height) / Weight
1092.8 mm x 83.5 mm x 626.4 mm / 20.5 kg
55XS4F
LCD screen
Power
Environmental
Conditions
Pixel pitch
0.630 mm (H) x 0.630 mm (V)
Rated power
AC 100-240 V ~ 50/60 Hz 4.2 A
Power consumption
On Mode: 375 W (Typ.)
Sleep Mode (DVI-D, HDMI, DISPLAYPORT): ≤ 0.5 W
Off Mode: ≤ 0.5 W
Operating Temperature
0 °C to 30 °C (Direct Sunlight)
0 °C to 40 °C (Without Direct Sunlight)
Operating Humidity
10 % to 80 %
Storage Temperature
-20 °C to 60 °C
Storage Humidity
5 % to 85 %
Installation site
Indoor
Dimensions (Width x Depth x Height) / Weight
1235.4 mm x 98.1 mm x 709.4 mm / 25.0 kg
27
HDMI / DVI-D / DISPLAYPORT (PC) Support Mode
Vertical frequency (Hz)
800 x 600
37.879
60.317
1024 x 768
48.363
60
1280 x 720
44.772
59.855
1366 x 768
47.712
60
1280 x 1024
63.981
60.02
1680 x 1050
65.290
59.954
1920 x 1080
67.5
60
Resolution
Horizontal frequency (kHz)
Vertical frequency (Hz)
480/60p
31.5
60
576/50p
31.25
50
720/50p
37.5
50
720/60p
45
60
1080/50i
28.1
50
1080/60i
33.75
60
1080/50p
56.25
50
1080/60p
67.5
60
HDMI / DISPLAYPORT (DTV) mode
NOTE
•• PC resolutions available for the Input Label option in HDMI / DVI-D / DISPLAYPORT input modes: 1280 x 720 /
60 Hz, 1920 x 1080 / 60 Hz; 480p, 720p, and 1080p DTV resolutions.
•• Vertical frequency: The product display functions by the screen image changing dozens of times every second like a
fluorescent lamp. The vertical frequency or refresh rate is the number of image displays per second. The unit is Hz.
•• Horizontal frequency: The horizontal interval is the time taken to display one horizontal line. When 1 is divided by
the horizontal interval, the number of horizontal lines displayed every second can be tabulated as the horizontal
frequency. The unit is kHz.
_Index
Horizontal frequency (kHz)
ENGLISH
Resolution
28
Supported licenses may differ by model. For more information of the licenses, visit www.lg.com.
_Index
ENGLISH
LICENSES
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered
trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries.
Manufactured under license from Dolby Laboratories. Dolby, Dolby Vision, Dolby Audio, Dolby Atmos, and the double-D
symbol are trademarks of Dolby Laboratories.
For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS, the Symbol,
& DTS and the Symbol together, DTS 2.0 Channel, DTS 2.0+Digital Out, DTS-HD, and DTS Virtual:X are registered
trademarks or trademarks of DTS, Inc. in the United States and/or other countries. © DTS, Inc. All Rights Reserved.
The model and serial number of the product are
located on the back and on one side of the product.
Record them below in case you ever need service.
MODEL
SERIAL NO.
Temporary noise is normal when powering ON or OFF
this device.
USER GUIDE
LG Digital
Signage
(MONITOR SIGNAGE)
Please read this manual carefully before operating your set and retain it
for future reference.
webOS 3.0
www.lg.com
2
ENGLISH
TABLE OF CONTENTS
USER SETTINGS....................... 3
-- Main Menu Settings.................................. 3
Picture Settings
Sound Settings
Network Settings
General Settings
ENTERTAINMENT................... 14
IR CODES................................ 34
TO CONTROL MULTIPLE
PRODUCTS............................. 36
-- Connecting the Cable............................. 36
-- Communication Parameter..................... 37
-- Command Reference List....................... 38
-- Transmission/Reception Protocol........... 41
-- Using Multimedia Features..................... 14
Connecting USB/SD Storage Devices
-- Photo & Video......................................... 16
Supported Photo & Video Files
Viewing Photos and Videos
Scheduled Playing
Export
Delete
-- Music....................................................... 20
Supported Music Files
Playing Music
Delete
-- SuperSign Contents................................ 21
-- Information.............................................. 21
-- Local Contents Scheduler....................... 22
Setting a Scheduled Playing
-- Screen Share.......................................... 23
-- Group Manager....................................... 24
-- Leveler Tool............................................. 26
-- Control Manager..................................... 27
How to Use
Follow the steps below if you encounter
issues with your security certificate while
attempting to access.
-- Multi-Screen............................................ 32
-- PICTURE ID Settings.............................. 33
To obtain the source code under GPL, LGPL,
MPL, and other open source licenses, that is
contained in this product, please visit
http://opensource.lge.com.
In addition to the source code, all referred
license terms, warranty disclaimers and
copyright notices are available for download.
LG Electronics will also provide open
source code to you on CD-ROM for a
charge covering the cost of performing
such distribution (such as the cost of media,
shipping, and handling) upon email request
to opensource@lge.com. This offer is valid
for three (3) years from the date on which
you purchased the product.
3
yy The software-related contents may be changed without prior notice due to upgrade of the product
functions.
yy Some features described in the User Guide may not be supported in certain models.
yy SNMP 2.0 is supported.
USER SETTINGS
Main Menu Settings
Picture Settings
To Select Picture Mode
/
Picture
Picture Mode Settings
Picture Mode
Select the picture mode that is best suited to the video type.
yy Vivid:adjusts the video image for a retail environment by enhancing the contrast, brightness, and
sharpness.
yy Standard: adjusts the video image for a normal environment.
yy APS: APS (Auto power saving ) mode reduces power consumption by dimming control.
yy Cinema: optimizes the video image for watching movies.
yy Sports: optimizes the video image for watching sports. Even fast actions such as kicking or throwing a ball
are rendered clearly on the screen.
yy Game: optimizes the video image for playing videogames.
yy Photo: Optimizes the screen for viewing photos. (This feature is available only with certain models.)
yy Expert/Calibration: allows an expert, or anyone interested in high quality pictures, to manually tune the
picture for the best picture quality.
NOTE
yy Depending on the input signal, the available Picture Modes may differ.
yy Expert is an option that allows a picture quality expert to fine-tune the picture quality using a specific
image. Thus, it may not be effective for a normal picture.
ENGLISH
NOTE
4
To fine-tune the picture mode
ENGLISH
SETTINGS /
Picture
Picture Mode Settings
Customize
yy Backlight/OLED LIGHT: adjusts the brightness of the screen by controlling the LCD backlight. The closer
the value is to 100, the brighter the screen is.
yy Contrast: adjusts the difference between the light and dark areas of the picture. The closer the value is to
100, the greater the difference is.
yy Brightness: adjusts the overall brightness of the screen. The closer the value is to 100, the brighter the
screen is.
yy Sharpness: adjusts the sharpness of the edges of objects. The closer the value is 50, the clearer and the
sharper the edge becomes.
yy H Sharpness: adjusts the sharpness of the contrast edges on the screen from a horizontal point of view.
yy V Sharpness: adjusts the sharpness of the contrast edges on the screen from a vertical point of view.
yy Color: softens or deepens the tints on the screen. The closer the value is 100, the deeper the colors
become.
yy Tint: adjusts the balance between red and green levels displayed on the screen. The closer the value is to
Red 50, the deeper the color red becomes, and the closer the value is to Green 50, the deeper the
color green becomes.
yy Color Temperature: adjusts the tints of the screen to evoke feelings of warmth or coolness.
yy Advanced Controls/Expert Control: customizes the advanced options.
–– Dynamic Contrast: Optimizes the difference between the light and dark parts of the screen according to the
brightness of the image.
–– Super Resolution: Sharpens the blurry or indistinguishable parts of the picture.
–– Color Gamut: Selects the range of colors to display.
–– Dynamic Color: Adjusts the tint and saturation of the image for a more vivid and lively display.
–– Edge Enhancer: Provides much sharper and clearer edges to the picture.
–– Color Filter: Accurately adjusts color and tint by filtering a specific color area of RGB space.
–– Preferred Color: Adjusts the skin tint, grass tint, and sky tint to your preference.
–– Gamma: Adjusts the medium brightness of the image.
–– White Balance: Adjusts the overall tint of the picture to your preference. In Expert mode, you can fine-tune the
picture using the Method/Pattern options.
–– Color Management System: E xperts use the color management system when they adjust the colors by using
the test pattern. The color management system allows you to make an adjustment
by selecting from among 6 different color spaces (Red/Yellow/Blue/Cyan/Magenta/
Green) without affecting other colors. You may not see tints change in a normal
picture even after adjustment.
5
yy Picture Options: customizes the picture options.
NOTE
yy You can adjust advanced settings only in the User mode.
yy Depending upon the input signal or the selected picture mode, the available options may differ.
To set the aspect ratio,
(Some features may not be supported in certain models.)
SETTINGS /
Picture
Aspect Ratio
Changes the aspect ratio to view the image in its optimal size.
yy 16:9: displays the image with a 16:9 aspect ratio.
yy Just Scan: displays the image in the original size without cutting off the edges.
Original is available in HDMI (720p or higher) mode. (On 58:9 models, this option can be
selected regardless of the input signal.)
yy Original: automatically changes the aspect ratio to 4:3 or 16:9 depending on the input video signal.
yy 4:3: displays the image with a 4:3 aspect ratio.
yy 58:9: Displays the screen with a 58:9 aspect ratio.
yy Vertical Zoom: Adjusts the height and vertical position of the displayed image.
yy All-Direction Zoom: Adjusts the horizontal/vertical/diagonal dimensions and horizontal/vertical position of
the displayed image.
CAUTION
yy If a fixed image is displayed on the screen for a long period of time, it will be imprinted and become a
permanent disfigurement on the screen. This image burn or burn-in is not covered by the warranty.
yy If the aspect ratio is set to 4:3 for a long period of time, image burn may occur on the letterboxed area of
the screen.
yy The options may differ depending on the model.
yy Depending on the input signal, the available aspect ratio may differ.
yy When you adjust Vertical Zoom or All-Direction Zoom, the screen may flicker for some input signals.
ENGLISH
–– Noise Reduction: Removes irregularly generated tiny dots for a clear picture.
–– MPEG Noise Reduction: Reduces the noise produced while creating digital video signals.
–– Black Level: A
djusts the black level of the picture to correct the brightness and contrast of the picture.
(Recommended settings according to input signal: RGB 0–255: High, RGB 16–235: Low, YCbCr: Low)
–– Real Cinema: Optimizes the video image for a cinematic look.
–– Motion Eye Care: Reduces eye fatigue by adjusting brightness levels and lessening blurriness based on the displayed image.
–– LED Local Dimming: Brightens the brighter parts of the image and darkens the darker parts, maximizing contrast.
Turning this feature off may lead to increased power consumption. (Only applies to certain
models.)
–– TruMotion: Reduces image shaking and image sticking that can occur with moving images.
6
To use the Energy Saving function
ENGLISH
SETTINGS /
Picture
Energy Saving
Reduces power consumption by adjusting peak screen brightness.
yy Auto: adjusts the brightness of the monitor according to ambient light. (This feature is available only with
certain models.)
yy Off: disables the Energy Saving mode.
yy Minimum/Medium/Maximum: uses the Energy Saving according to the Energy Saving level specified for
your monitor.
yy Screen Off: turns off the screen. You will only hear audio. You can turn on the screen again by pressing
any button on the remote control except the power button.
To use the Smart Energy Saving function
(Only applies to certain models.)
SETTINGS /
Picture
Smart Energy Saving
According to picture brightness, the brightness of the monitor will be adjusted automatically to save energy.
yy Off: disables the Smart Energy Saving function.
yy On: enables the Smart Energy Saving function.
Configuring the OLED Display
[For OLED models only]
SETTINGS /
Picture
OLED Panel Settings
yy Clear Panel Noise: Corrects issues that may arise when the screen is turned on for a long period of time.
To use the SCREEN(RGB-PC) function
(Only applies to certain models.)
SETTINGS /
Picture
SCREEN(RGB-PC)
Customizes the PC display options in RGB mode.
yy Set Automatically: Sets to adjust the screen position, clock, and phase automatically.
The displayed image may be unstable for a few seconds while the configuration is in
progress.
yy Resolution: Selects a proper resolution.
yy Position/Size/Phase: Adjusts the options when the picture is not clear, especially when characters are
shaky, after the auto configuration.
yy Reset: Restores the options to the default setting.
7
Sound Settings
ENGLISH
yy Only applies to certain models.
To select a Sound Mode
SETTINGS /
Sound
Sound Mode
The best sound quality will be selected automatically depending on the video type currently being watched.
yy Standard: this sound mode works well for content of all types.
yy Cinema: optimizes sound for watching movies.
yy Clear Voice III: Enhances voices so they can be heard more clearly.
yy Sports: optimizes sound for watching sports.
yy Music: optimizes sound for listening to music.
yy Game: optimizes sound for playing videogames.
To use the Sound Effects function
SETTINGS /
Sound
Sound Mode Settings
yy Equalizer: manually adjust sound by using the equalizer.
yy Balance: adjust the output volume for the left speaker and the right speaker.
yy Reset: reset the sound settings.
8
Selecting Sound Output Device
ENGLISH
SETTINGS /
Sound
Sound Out
yy Signage Speaker: You can output sound through the signage monitor’s internal speakers. This feature is
available only for models with built-in signage speakers.
yy LG Sound Sync / Bluetooth: You can connect Bluetooth audio devices or Bluetooth headsets wirelessly to
enjoy richer sound from the signage monitor conveniently.
NOTE
yy Some recently connected devices may automatically attempt to reconnect to the Signage monitor when it
is turned on.
yy It is recommended that you set LG audio devices that support LG Sound Sync to LG TV mode or LG
Sound Sync mode before connecting.
yy This feature is only available on certain models.
yy Press Device Selection to view the devices that are or that can be connected and connect other devices.
yy You can use the signage remote control to adjust the volume of the connected device.
yy If the audio device fails to connect, check that it is switched on and available for connection.
yy Depending on the type of Bluetooth device, the device may not connect correctly or a malfunction such as
unsynchronized video and audio may occur.
yy Sound may stutter or sound quality may be reduced if:
- The Bluetooth device is too far from the signage monitor.
- There are objects obstructing the Bluetooth device and signage monitor.
- The device is used in proximity to other radio devices such as a microwave oven or wireless LAN router.
To select a Volume Increase Rate,
SETTINGS /
Sound
Volume Mode
Volume Increase Amount
You can set the volume range by selecting any of Low/ Medium/ High.
To sync audio with video
SETTINGS /
Sound
AV Sync Adjustment
yy Signage Speaker: adjusts the sync between video and audio coming from external speakers, such as those
connected to the digital audio output port, LG audio equipment, or headphones. From
the default value, the closer the value is to -, the faster the sound output becomes, and
the closer the value is to +, the slower the sound output becomes.
yy Bypass: audio coming from external devices without delay. Audio may be outputted earlier than video due
to the processing time for video that is inputted into the monitor.
9
Network Settings
SETTINGS /
Network
Signage Name
You can set a name for Signage Monitor that will be used on the network by using the on-screen keyboard.
To Set Your Wired Network
SETTINGS /
Network
Wired Connection (Ethernet)
yy Connecting to a wired network: Connect your monitor to a local area network (LAN) via the LAN port,
and configure the network settings. Only wired network connections
are supported. After making a physical connection, a small number of
networks may require the display network settings to be adjusted. For
most networks, the display will automatically make a connection without
any adjustments. For detailed information, contact your Internet provider
or consult your router manual.
Setting a Wireless Network
(Only applies to certain models.)
SETTINGS /
Network
Wi-Fi Connection
If you have set the monitor up for a wireless network, you can check and connect to the available wireless
Internet networks.
yy Add a Hidden Wireless Network: If you input the name of network directly, you can add a wireless
network.
yy WPS PBS connection: Press the button on the wireless router that supports PBC to easily connect to the
router.
yy WPS PIN Code connection: Enter the PIN number in the web page of the PIN-supporting wireless router
to connect to the router in a simple manner.
yy Wi-Fi advanced settings: Manually input the network information to connect to a wireless network. When
a usable wireless network does not appear, press Wi-Fi advanced settings. You
will be able to add a network.
Setting up a SoftAP
(Only applies to certain models.)
SETTINGS /
Network
SoftAP
If you set up a SoftAP, you can connect many devices via a Wi-Fi connection without a wireless router and
use wireless Internet.
yy To use SIGNAGE, you must have an Internet connection.
yy You cannot use the SoftAP feature and the Screen Share feature at the same time.
yy On models that support Wi-Fi dongles, the SoftAP menu is enabled only when a Wi-Fi dongle is connected
to the product.
yy SoftAP connection information
–– SSID: A unique identifier necessary to make a wireless Internet connection
–– Security key: The security key you enter to connect to the desired wireless network
–– Number of connected devices: Shows the number of devices currently connected to your Signage device via a
Wi-Fi connection. Up to 10 devices are supported.
ENGLISH
To Set a Signage Monitor Name
10
Tips for Network Setting
ENGLISH
yy Use a standard LAN cable (Cat5 or higher with a RJ45 connector) with this display.
yy Many network connection problems during set-up can often be fixed by re-setting the router or modem.
After connecting the display to the home network, quickly power off and/or disconnect the power cable of
the home network router or cable modem, then power on and/or connect the power cable again.
yy Depending on the Internet Service Provider (ISP), the number of devices that can receive Internet service
may be limited by the applicable terms of service. For details, contact your ISP.
yy LG is not responsible for any malfunction of the display and/or the Internet connection feature due
to communication errors/malfunctions associated with your Internet connection, or other connected
equipment.
yy LG is not responsible for problems with your Internet connection.
yy You may experience undesired results if the network connection speed does not meet the requirements of
the content being accessed.
yy Some Internet connection operations may not be possible due to certain restrictions set by the Internet
Service Provider (ISP) supplying your Internet connection.
yy Any fees charged by an ISP including, without limitation, connection charges are your responsibility.
NOTE
yy If you want to access the Internet directly on your display, the Internet connection should always be on.
yy If you cannot access the Internet, check the network conditions from a PC on your network.
yy When you use Network Setting, check the LAN cable or check if DHCP in the router is turned on.
yy If you do not complete the network settings, the network may not function correctly.
CAUTION
yy Do not connect a modular telephone cable to the LAN port.
yy Since there are various connection methods, please follow the specifications of your telecommunication
carrier or Internet Service Provider.
yy Network Setting menu will not be available until the display is connected to a physical network.
Tips for Wireless Network Setting
yy Wireless networks can be subject to interference from other devices operating at a frequency of 2.4 GHz
(wireless phones, Bluetooth devices or microwave ovens). There may also be interference from devices
with a frequency of 5 GHz, same as other Wi-Fi devices.
yy The surrounding wireless environment can cause the wireless network service to run slowly.
yy If you do not turn off the entire local home network, network traffic may occur on some devices.
yy For an AP connection, an access point device that supports wireless connection is required and the
wireless connection feature must be enabled on the device. Contact your service provider regarding
availability of wireless connection on your access point.
yy Check the SSID and security settings of the AP for AP connection. Refer to the appropriate documentation
for SSID and security settings of the AP.
yy Invalid settings on network devices (wired/wireless line sharer, hub) can cause the monitor to run slowly or
not operate properly. Install the devices correctly according to the appropriate manual and set the network.
yy Connection method may differ according to the AP manufacturer.
11
General Settings
SETTINGS /
General
Menu Language
Select one of the languages on the menu displayed on the screen.
yy Menu Language: sets a language for Signage.
Setting up the keyboard language
SETTINGS /
General
Keyboard Languages
Select the language you wish to show on the keyboard.
yy Keyboard Languages: Sets the keyboard language.
To set the time/date
SETTINGS /
General
Time & Date
You can check or change the time.
yy Set Automatically: You can set Time and Date.
yy Daylight Saving Time: Y
ou can set Start Time and End Time for Daylight Saving Time. The DST start/end
settings work only when you set them more than one day apart from each other.
yy Time zone: You can change the settings for Continent, Country/Territory, and City.
To turn your monitor on or off automatically
SETTINGS /
General
Timers
You can set the On/Off Timer for your monitor.
yy On Timer: you can set the time when your monitor turns on.
yy Off Timer: you can set the time when your monitor turns off.
yy No Signal Power Off (15Min): When there is no input source, the monitor will automatically turn off after
15 minutes. If you don’t want it to turn off automatically, set No Signal
Power Off to Off.
yy Auto Power Off: When there is no key input, the monitor will automatically turn off.
NOTE
yy On Time/Off Time can be saved for up to seven schedules; the monitor is turned on or off at the preset time
in the schedule list. If multiple preset times are stored in the schedule list, this function works at the nearest
time from the current time.
yy Once the on or off time is set, these functions operate daily at the preset time.
yy The scheduled power-off function works properly only when the device time is set correctly.
yy When the scheduled power-on and power-off times are the same, the power-off time has priority over the
power-on time if the set is turned on, and vice versa if the set is turned off.
ENGLISH
To configure the language
12
Configuring Set ID
ENGLISH
SETTINGS /
General
Set ID
yy Set ID (1 to 1000): Assigns a unique Set ID number to each product when several products are connected
for display. Assign numbers ranging from 1 to 1000 and exit the option. You can control each product
separately by using the Set ID you assigned to each product.
yy Auto Set ID: Automatically assigns a unique Set ID number to each set when several products are
connected for display.
yy Reset Set ID: Resets the Set ID of the product to 1.
NOTE
yy When using automatic ID settings, the IR signal only needs to be transmitted to the first set. Malfunctions
could occur when the IR signal is transmitted to other sets.
Using Tile Mode
(Only applies to certain models.)
SETTINGS /
General
Tile Mode
You can configure the integrated screen in the same way as each screen is configured.
yy Row (1 to 15): Sets the number of tile rows.
yy Column (1 to 15): Sets the number of tile columns.
yy Tile ID (1 to 225): Sets the Tile ID. The ID you selected will be displayed on the screen.
yy Natural: For a more natural display, the image is partly omitted to account for the distance between the
screens.
yy Natural Size: Sets the distance between screens for Natural mode.
yy Reset: Resets the tile settings to 2 x 2.
NOTE
yy If Tile mode is set to On, Smart Energy Saving mode will be disabled to provide the same picture quality as
other displays.
yy The maximum number of columns and lines that can be set may differ by model.
yy To use this function, the product:
- Must be displayed with other products.
- Must be operated by connecting to each display via a distributor or DP daisy chain.
- Tile Mode: Horizontal x Vertical (Horizontal = 1 to 15, Vertical = 1 to 15)
- 15 x 15 is available
13
Configuring the Dual-View Screen
SETTINGS /
General
Dual-View Screen Setting
yy Front Screen Name: Sets the name of the front screen.
yy Back Screen Name: Sets the name of the back screen.
yy Screen Swap: Swaps the images on the front and back side of the screens.
yy Screen Mirroring: Copies the image of the current screen to the opposite screen.
yy Screen Off: Turns off the front or back screen.
yy Clone All Settings: Copies all settings for the front screen to those for the back screen. This option is only
enabled for the front screen.
To reset your monitor settings
SETTINGS /
General
Reset to Initial Settings
General
UHD Deep Color
Resets all monitor settings.
Using UHD Deep Color
[For Ultra HD models only]
SETTINGS /
If you connect an HDMI or DP device to one of the Deep Color adjustable ports, you can select between Ultra
Deep Color On (6G) or Off (3G) in the UHD Deep Color settings menu.
If a compatibility issue occurs with the graphics card when the Deep Color option is set to On at 3840 x 2160
@ 60 Hz, set the Deep Color option to Off.
yy HDMI and DP specifications may vary depending on the input port. Check the specifications of each
device before connecting.
yy HDMI input ports 1 and 2 are best suited for specifications for high definition 4K @ 60 Hz (4:4:4, 4:2:2)
video. However, video or audio may not be supported depending on the specifications of the external
devices. If this is the case, please connect to a different HDMI port.
ENGLISH
[For double-sided flat OLED models only]
14
ENGLISH
ENTERTAINMENT
Using Multimedia Features
Connecting USB/SD Storage Devices
Connect a USB storage device such as a USB flash memory, SD storage devices or an external hard drive to
the display and use multimedia features.
CAUTION
yy Do not turn the monitor off or remove the USB storage device while Photo & Video or Music is playing.
yy Back up files you have saved on a USB storage device frequently, as loss or damage to the files may be
not covered by the warranty.
15
Tips for using USB/SD storage devices
ENGLISH
yy Only a USB storage device can be recognized.
yy A USB device does not work effectively when it is connected via a USB hub.
yy A USB storage device using an automatic recognition program may not be recognized.
yy A USB storage device using its own driver may not be recognized.
yy The recognition speed of a USB storage device may depend on each device.
yy Please do not turn off the display or unplug the USB storage device when the connected device is working.
If the USB storage device is suddenly disconnected, the stored files or the device itself may be damaged.
yy Please do not connect a USB storage device which was modified to work on a PC. The device may cause
the monitor to malfunction or the content fail to be played. Use only a USB storage device which contains
normal music, image or video files.
yy A USB storage device formatted as a utility program not supported by Windows may not be recognized.
yy A USB storage device (over 0.5 A) which requires an external power supply must be connected to a power
supply separately. If it is not, the device may not be recognized.
yy Please connect the USB storage device using the cable provided by the device manufacturer.
yy Some USB storage devices may not be supported or operate smoothly.
yy File alignment method of USB storage devices is similar to that of Window XP and filenames can recognize
up to 100 English characters.
yy Back up important files regularly as data stored on a USB storage device may be damaged. We will not be
responsible for any data loss.
yy If the USB HDD does not have an external power source, the USB device may not be detected. To ensure
the device is detected, connect the external power source.
- Please use a power adapter for an external power source. We do not provide a USB cable for an external
power source.
yy If your USB storage device has multiple partitions, or if you use a USB multi-card reader, you can use up to
four partitions or USB storage devices.
yy If a USB storage device is connected to a USB multi-card reader, its volume data may not be detected.
yy If the USB storage device does not work properly, disconnect and reconnect it.
yy Detection speed differs from device to device.
yy If the USB storage device is connected in Standby Mode, the specific hard disk will automatically be loaded
when the display is turned on.
yy The recommended capacity is 1 TB or less for a USB external hard drive and 32 GB or less for USB
memory stick.
yy Any device with more than the recommended capacity may not work properly.
yy If a USB external hard drive with an “Energy Saving” function does not work, try turning the hard drive off
and on again.
yy USB storage devices below USB 2.0 are also supported but may not function correctly in the Videos.
yy A maximum of 999 sub-folders or files can be recognized under one folder.
yy The SDHC type for SD cards is supported. To use an SDXC card, format it to the NTFS file system first.
yy The exFAT file system is not supported for SD cards and USB storage devices.
yy Certain models do not support SD cards.
16
ENGLISH
Photo & Video
yy The photo feature is not supported in OLED models.
Supported Photo & Video Files
Supported External Subtitle Format
yy *.smi, *.srt, *.sub (MicroDVD, SubViewer 1.0/2.0), *.ass, *.ssa, *.txt (TMPlayer), *.psb (PowerDivX),
*.dcs (DLP Cinema)
NOTE
yy Subtitles are not supported in certain models.
yy Embedded subtitles are not supported.
Supported Video Codecs
Extension
Codec
.asf
Video
VC-1 Advanced Profile (excluding WMVA), VC-1 Simple and Main Profiles
.wmv
Audio
WMA Standard (excluding WMA v1 / WMA Speech)
.avi
Video
Xvid (excluding 3 warp-point GMC), H.264/AVC, Motion Jpeg, MPEG-4
Audio
MPEG-1 Layer I, II, MPEG-1 Layer III (MP3), Dolby Digital, LPCM, ADPCM, DTS
.mp4
Video
H.264/AVC, MPEG-4, HEVC
.m4v
Audio
Dolby Digital, Dolby Digital Plus, AAC, MPEG-1 Layer III (MP3)
.3gp
Video
H.264/AVC, MPEG-4
.3g2
Audio
AAC, AMR-NB, AMR-WB
.mkv
Video
MPEG-2, MPEG-4, H.264/AVC, VP8, VP9, HEVC
Audio
Dolby Digital, Dolby Digital Plus, AAC, PCM, DTS, MPEG-1 Layer I, II, MPEG-1 Layer III
(MP3)
Video
H.264/AVC, MPEG-2, HEVC
Audio
MPEG-1 Layer I, II, MPEG-1 Layer III (MP3), Dolby Digital, Dolby Digital Plus, AAC, PCM
.mpg
Video
MPEG-1, MPEG-2
.mpeg
Audio
MPEG-1 Layer I, II, MPEG-1 Layer III (MP3)
Video
MPEG-1, MPEG-2
Audio
Dolby Digital, MPEG-1 Layer I, II, DVD-LPCM
.mov
.ts
.trp
.tp
.mts
.dat
.vob
NOTE
yy 3D videos are not supported.
17
Maximum data transfer rate
yy Ultra HD [Applies only to Ultra HD models]
H.264 1920 x 1080@60P 4096 x 2160@30P BP/MP/HP@L5.1 50 Mbps
HEVC 4096 x 2160@60P MP@L5.1, Main10 Profile@L5.1 50 Mbps
Supported Photo File
File Format
jpeg, jpg, jpe
Format
JPEG
Item
yy Minimum : 64 x 64
yy Maximum
- Normal Type: 15360 (W) x 8640 (H)
- Progressive Type: 1920 (W) x 1440 (H)
.png
PNG
.bmp
BMP
yy Minimum : 64 x 64
yy Maximum: 5760 (W) x 5760 (H)
yy Minimum : 64 x 64
yy Maximum: 1920 (W) x 1080 (H)
ENGLISH
yy Full HD video
H.264 1920 x 1080@60P BP/MP/HP@L4.2 40 Mbps
HEVC 1920 x 1080@60P MP@L4.1, Main10 Profile@L4.1 40 Mbps
18
ENGLISH
Viewing Photos and Videos
HOME /
1
2
Select your desired storage device.
Select and view your desired photo or video.
Tips for Playing Video Files
yy Some user-created subtitles may not work properly.
yy Some special characters in subtitles are not rendered.
yy HTML tags are not supported in subtitles.
yy Subtitles in languages other than the supported languages are not available.
yy The screen may suffer temporary interruptions (image stoppage, faster playback, etc.) when the audio
language is changed.
yy A damaged video file may not play correctly, or some player functions may not be usable.
yy Video files produced with some encoders may not be played correctly.
yy If the video and audio structure of a recorded file is not interleaved, either video or audio is outputted.
yy Video files other than the specified types and formats may not play correctly.
yy Maximum bit rate of playable video file is 20 Mbps. (Motion JPEG: 10 Mbps only)
yy We cannot guarantee smooth playback of files encoded level 4.1 or higher in H.264 / AVC.
yy Video files more than 30 GB in file size are not supported.
yy A video file and its subtitle file must be located in the same folder. A video file name and its subtitle file
name must be identical in order to display the subtitle properly.
yy Playing a video via a USB connection that does not support high-speed connection may not function
correctly.
yy Subtitles on a Network Attached Storage (NAS) device may not be supported depending on the
manufacturer and model.
yy Streaming of files encoded by GMC (Global Motion Compensation) or Qpel (Quarterpel Motion Estimation)
is not supported.
yy [For Ultra HD models only] Ultra HD image: 3840 X 2160
Some HEVC-encoded Ultra HD videos other than the content officially provided by LG Electronics may not
be played. Some codecs can be used after upgrading software.
Extension
Codec
.mkv
Video
H.264/AVC, HEVC
.mp4
Audio
Dolby Digital, Dolby Digital Plus, AAC, HE-AAC
.ts
yy Playable file sizes may vary depending on the encoding condition.
yy The AAC Main profile is not supported.
yy Video files created by some encoders may not play.
19
Scheduled Playing
You can schedule your selected content to play at a certain time. (Scheduled playing is available with external
inputs.)
HOME /
1
2
3
4
5
6
Select your desired storage device.
Enter the folder that contains the file you wish to schedule.
Click the NEW SCHEDULED PLAYING button in the upper right.
Select the content that you would like to schedule to play.
Enter schedule details to create a new schedule.
Watch your selected content play at the set time.
Export
yy Only applies to certain models.
HOME /
1
2
3
4
5
Select your desired storage device.
6
Check that the file has been copied or moved to the selected device.
Enter the folder that contains the file you wish to export.
Click the EXPORT button in the upper right.
Select the file you wish to export.
Click the COPY / MOVE button in the upper right and select the device to which you would like to export the
file.
Delete
HOME /
1
2
3
4
5
6
Select your desired storage device.
Enter the path to the file you wish to delete.
Click the Delete button.
Select the file you wish to delete.
Click the Delete button at the top right.
Check that the file has been deleted from the list.
ENGLISH
yy Only applies to certain models.
20
ENGLISH
Music
Supported Music Files
File Format
.mp3
.wav
.ogg
.wma
Item
Information
Bit rate
32 Kbps to 320 Kbps
Sample freq.
16 KHz to 48 KHz
Support
MPEG1, MPEG2
Channels
Mono, Stereo
Bit rate
-
Sample freq.
8 kHz to 48 kHz
Support
PCM
Channels
Mono, Stereo
Bit rate
64 Kbps to 320 Kbps
Sample freq.
8 kHz to 48 kHz
Support
Vorbis
Channels
Mono, Stereo
Bit rate
128 Kbps to 320 Kbps
Sample freq.
8 kHz to 48 kHz
Support
WMA
Channels
Up to 6 channels
Playing Music
HOME /
1
2
Select your desired storage device. You can select the songs you would like to play across all storage
devices in My playlist.
Select the desired music content and enjoy.
Delete
HOME /
1
2
3
4
5
6
Select your desired storage device.
Enter the path to the file you wish to delete.
Click the Delete button.
Select the file you wish to delete.
Click the Delete button at the top right.
Check that the file has been deleted from the list.
21
Plays stored files using the Export option in SuperSign Editor.
To play back the stored files using the Export option
HOME /
Only contents distributed by SuperSign Manager are displayed and selectable. If there is a USB/SD storage
device connected, the image on the USB/SD device is outputted additionally.
NOTE
yy If a folder named normal or AutoPlay exists on the USB/SD card and there are playable files, the files will
play automatically when the USB/SD card is connected.
yy OLED product types do not play content types other than single video or single flash files. Content
produced via SuperSign Editor is not played either.
Information
To check the basic information of Signage Monitor
HOME /
You can see the basic information on Signage Monitor.
You can also switch to Smart Energy Saving Mode or configure Fail Over settings. (You can switch to
Smart Energy Saving Mode only when Energy Saving Mode is set to Off. The Smart Energy Saving mode
is not available on OLED models.)
ENGLISH
SuperSign Contents
22
ENGLISH
Local Contents Scheduler
yy Only applies to certain models.
yy The recommended resolution for scheduled photo playback is 4096 x 2160 or below.
Setting a Scheduled Playing
You can create a scheduled playing using the Local Contents Scheduler and the Photo & Video app.
Scheduled Playing with Photo & Video
yy 1st Method: Refer to the scheduled playing section in Photo & Video app.
yy 2nd Method: HOME /
1
2
3
4
5
6
Press the NEW SCHEDULED PLAYING button in the upper right.
Press the LOCAL CONTENTS button.
Select the storage device that you would like to schedule to play.
Select the content that you would like to schedule to play after navigating to the Photo & Video app.
Enter schedule details to create a new schedule.
Watch your selected content play at the set time.
Scheduled Playing with External Input
HOME /
1
2
3
4
Press the NEW SCHEDULED PLAYING button in the upper right.
Select the INPUT SOURCE.
Enter schedule details to create a new schedule.
Watch your selected external input play at the set time.
23
yy Only applies to certain models.
Allows the screens of devices such as a mobile device or Windows PC to be displayed on the monitor via
wireless connections such as WiDi or Miracast.
Using Screen Share
HOME /
1
2
Connect according to the instructions provided by the guide that can be accessed through the
CONNECTION GUIDE button in the upper right.
Once the connection is established, Screen Share between the user device and the monitor is enabled.
NOTE
Configuring WiDi (Wireless Display)
WiDi, which is short for Wireless Display, is a system that wirelessly transmits video and sound files from a
laptop that supports Intel WiDi to the display.
This is available only in certain input modes (Composite/Component/RGB/HDMI/DP/OPS/DVI-D).
Other than these modes, LG Signage cannot be detected by your PC.
1
Connect your laptop to an AP. (This feature can be used without an AP, but it is recommended that you
connect to it for optimal performance.)
Run the Intel WiDi ( ) program on your laptop.
2
Any nearby LG Signages supporting WiDi are detected. In the list of detected displays, select a Signage to
connect to and then, click Connect.
Enter the 8-digit PIN number (a) displayed on the Signage in the input field of your laptop (b) and click
Continue.
[Intel Notebook] Connection Request
Enter the PIN below.
PIN********
a
********
b
Time remaining: 92 seconds
Cancel
Signage screen
3
Laptop screen
The laptop screen appears in the Signage screen within 10 seconds. The wireless environment may affect
the screen from displaying.
If the connection is poor, the Intel WiDi connection may be lost.
yy LG Signage does not need to be registered.
yy For more information on how to use Intel WiDi, visit http://intel.com/go/widi.
yy This works normally with WiDi 3.5 or later versions.
ENGLISH
Screen Share
24
ENGLISH
Group Manager
yy Only applies to certain models.
Using this template-based content editing program, you can produce, manage and play content. There are three
modes: Master, Slave and StandAlone. The program can be used to distribute and play schedules between the Master
and Slave. It also provides access from mobile device or PC.
CAUTION
yy A maximum of 5,000 images stored on a USB drive/SD card can be displayed from your PC or mobile
device. Images more than 5,000 cannot be displayed from your PC or mobile device. In addition, we
recommend you store no more than 1,000 images for use on your USB drive or SD card. If you use more
than 1,000 images, the images may not be displayed smoothly depending on your environment.
yy Supported devices (Some features may not be available depending on the type or version of your device or
browser.)
–– Android 4.4 or later (Chromium v.38.0)
–– iOS 8 or later (Safari v.600.1.4 or later)
–– PC: Chromium v.38.0
yy Supported resolutions (this program is optimized for the following resolutions):
–– 360 x 640, 600 x 960, 375 x 667, 768 x 1024 and 1920 x 1080
yy If you play UHD videos on a UHD model, videos with a high bitrate may not play properly due to the
limitations of the processing speed.
yy You can select Slave mode in Master mode when the monitors are connected to the same network.
yy Video files larger than 50 MB may not upload properly from mobile devices. We recommend that you play
such files via USB/SD storage devices.
Function
The following functions are provided according to the mode selected by the user. However, Slave mode is
automatically set to the monitor selected in Master mode.
yy Master
––
––
––
––
Group: Add / Edit / Delete / Control (Volume, Backlight, Reboot, Exit)
Content: Add / Edit / Delete
Schedule: Add / Edit / Delete / Distribute / Play
Edit PIN Number / Automatic USB Backup / USB Backup Restoration / Mail Settings / QR Code / Device Mode
yy Slave
–– Plays the schedule distributed by the Master
yy StandAlone
–– Content: Add / Edit / Delete
–– Schedule: Add / Edit / Delete / Distribute / Play
–– Edit PIN Number / QR Code / Device Mode
How to Use
yy Monitors: Run the app in the Launcher bar and add/edit/delete the desired content.
yy Mobile devices: Run the app in the Launcher bar and get access using the QR code or URL provided.
25
yy If you use a mobile device, you need to go through an authorization process using a PIN code. The default
PIN code is ‘000000’.
yy When using a PC, use the full screen (F11) feature in 1920 x 1080 (Full HD) resolution to view the same
screen as the monitor.
yy To delete a distributed schedule, disable the schedule and redistribute.
Supported Photo Files
File Format
Format
jpeg, jpg
JPEG
.png
PNG
Item
yy Minimum: 64 x 64
yy Maximum: 1920 (W) x 1080 (H)
yy Minimum: 64 x 64
yy Maximum: 1920 (W) x 1080 (H)
Supported Video Codecs
Refer to the ‘Supported Video Codecs’ table of Photo & Video app.
Tips for Playing Video Files
Refer to the ‘Tips for Playing Video Files’ subsection of Photo & Video app.
ENGLISH
NOTE
26
ENGLISH
Leveler Tool
yy Only applies to certain models.
You can check whether the product is horizontally and vertically level when installing the product outdoors in an
enclosure.
Accessing the Leveler Tool
HOME /
You can check whether the product is horizontally and vertically level.
Exiting the Leveler Tool
Exit the Leveler Tool by pressing the EXIT key on your remote control.
Checking the Angle of the Product
HOME /
yy You can check the tilt of the product using the bubble in the leveler and the angle indication.
yy The left/right tilt is indicated by the leveler and angle indication on the left side of the screen.
yy The front/back tilt is indicated by the leveler and angle indication on the right side of the screen.

NOTE
yy If the product is tilted more than five degrees in any direction, an arrow will flash in the
direction the product needs to be adjusted to.
27
yy Only applies to certain models.
You can control and check the status of the display through web browser.
This function is available on PC and mobile device.

CAUTION
yy Supported resolutions (this program is optimized for the following resolutions):
–– 1280 x 1024 / 375 x 667
yy Supported browsers (this program is optimized for the following browsers):
–– IE 11 or later / Chrome 50 or later / Firefox 38 or later
yy If set to OSD Portrait Mode, the OSD menu that appears on the captured screen will be in Landscape
orientation.
Function
yy Dashboard – Shows a summary of the product's status and provides links to each page.
yy Device Control – Adjusts screen brightness, sound and input, reboots, etc.
yy Virtual Controller – Shows the image displayed on the product in real time and enables remote control.
yy Picture – Sets Picture Mode, Energy Saving, OSD Portrait, etc.
yy Network – Sets Signage Name, IP Address, etc.
yy Time – Enables or disables Set Automatically and shows the current time set for the product.
yy Check Screen – Shows the product’s current image output.
yy Door Monitor – S
hows whether the product is open or closed and provides controls for screen Mute for
each status.
yy S/W update – Provides firmware updates.
yy Charts – Outputs information on the product's temperature, fan status, etc. in chart form.
yy Fan Status – Shows the status of the fan installed in the product.
yy Log – Displays product malfunction records.
yy System Information – Outputs the product's S/W version, model name, etc.
yy Media Library – Uploads media files to the product and outputs the uploaded file.
ENGLISH
Control Manager
28
How to Use
ENGLISH
On a PC
1
Enter ‘https://Product IP address:3737’ in the browser's address bar to access the Control Manager
login page.
2
Enter the password in the Password window (The default password is ‘000000’).
3
Click the Login button after entering the password to access the Dashboard.
4
Click the face-shaped image to access the User Menu (Change Password, Logout).
On a Mobile Device (by entering IP address)
1
Enter 'https://Product IP address:3737' in the browser's address bar to access the Control Manager
login page.
2
Enter the password in the Password window (The default password is ‘000000’).
3
Click the Login button after entering the password to access the Dashboard.
4
Click the Menu button in the upper left to expand the menu.
5
Click the face-shaped image to access the User Menu (Change Password, Logout).
On a Mobile Device (by QR code recognition)
1
Launch the Control Manager App.
2
Scan the QR Code with your smartphone to access the Login Page.
3
Click the Login button after entering the password to access the Dashboard.
4
Click the Menu button in the upper left to expand the menu.
5
Click the face-shaped image to access the User Menu (Change Password, Logout).

CAUTION
yy For apps that do not support security protocols, access the Control Manager by entering the address
displayed on the app’s screen in your browser.
29
On Chrome
1
Click ADVANCED
2
Click Proceed to product IP address (unsafe)
ENGLISH
Follow the steps below if you encounter issues with your security certificate
while attempting to access.
30
On FireFox
ENGLISH
1
Click Advanced
2
Click Add Exception...
3
Click Confirm Security Exception
31
On Internet Explorer
Click Continue to this website (not recommended).
*The text of the links and buttons may differ depending on the OS (Operating System) or language settings
used.
ENGLISH
1
32
ENGLISH
Multi-Screen
yy Only applies to certain models.
This feature allows you to view multiple external
inputs and videos on a single screen.
Accessing Multi-Screen
HOME /
Enter Multi-screen to select the screen layout.
NOTE
Changing Screen Input
Press the
button on the top right of each split
screen to select the desired input.
NOTE
yy Inputs which have already been selected for
other split screens cannot be selected again. To
select them, press the RESET button to reset the
inputs for all screens first.
yy PIP mode is only available when Content
Rotation and OSD Portrait are set to 0.
yy When entering Multi-screen, the screen may
flicker and the picture may appear abnormal on
certain devices while the optimal resolution is
selected automatically. If this happens, please
restart the monitor.
Selecting Screen Layout
When you enter Multi-screen without having set
any screen layout, the screen layout selection
menu appears.
If the screen layout menu does not appear, you
can press the up arrow key on the remote control
to go to the screen layout menu bar and select it
to show the screen layout menu.
Playing Videos on Split Screens
Press the
button on the upper right of each
split screen, select Video File, and then select
a storage device to view the list of videos in the
selected device. Next, select your desired video
from the list to play it.
NOTE
yy Videos created with HEVC, MPEG-2, H.264, or
VP9 codecs can be played on split screens.
Closing Screen Layout Menu
From the screen layout menu, press the up arrow
key on the remote control to go to the screen
layout menu bar and select it or press the BACK
key to close the screen layout menu.
When using PIP mode, the following combinations cannot be used.
Main
Sub
HEVC
HEVC
H.264
HEVC
MPEG-2
HEVC
VP9
VP9
33
NOTE
yy Only applies to certain models.
PICTURE ID is used to change the settings of a
specific set (display) using a single IR receiver for
multi-vision. Communication is possible between
a monitor with an IR receiver and other monitors
using RS-232C cables. Each monitor is identified
by a Set ID. If you assign the PICTURE ID using
the remote control, only displays with matching
PICTURE ID and Set ID can be controlled
remotely.
AUDIO
(RGB/DVI)
RS-232C OUT
RS-232C OUT
RS-232C OUT
RS-232C IN
RS-232C IN
RS-232C IN
REMOTE
CONTROL IN
1
Assign the Set ID to the installed monitors as
shown below.
IR & Light Sensor
RS-232C cables
PICTURE ID
2
Press the red ON button on the remote control to
assign the PICTURE ID.
3
Assign the Set ID to the selection of your choice.
yy A set with a different Set ID from the PICTURE
ID cannot be controlled by IR signals.
yy If PICTURE ID is set to 2, only the upper
right monitor, which has a Set ID of 2, can be
controlled by IR signals.
yy If you press the green OFF button for PICTURE
ID, the PICTURE IDs for all monitors are turned
off. If you then press any button on the remote
control, all monitors can be controlled by IR
signals regardless of Set ID.
ENGLISH
PICTURE ID Settings
34
ENGLISH
IR CODES
All models do not support the HDMI/USB function.
Some key codes may not be supported depending on the model.
Code (Hex)
Function
08
Remarks
Remote control button
(POWER)
C4
MONITOR ON
Remote control button
C5
MONITOR OFF
Remote control button
95
Energy Saving
Remote control button
0B
INPUT
Remote control button
10
Number Key 0
Remote control button
11
Number Key 1
Remote control button
12
Number Key 2
Remote control button
13
Number Key 3
Remote control button
14
Number Key 4
Remote control button
15
Number Key 5
Remote control button
16
Number Key 6
Remote control button
17
Number Key 7
Remote control button
18
Number Key 8
Remote control button
19
Number Key 9
Remote control button
02
Volume
Remote control button
03
Volume
E0
BRIGHTNESS
(Page Up)
Remote control button
E1
BRIGHTNESS
(Page Down)
Remote control button
DC
3D
Remote control button
32
1/a/A
Remote control button
2F
CLEAR
Remote control button
Remote control button
7E
Remote control button
79
ARC(MARK) (Aspect Ratio)
Remote control button
4D
PSM (Picture Mode)
Remote control button
09
MUTE
Remote control button
43
SETTINGS (Menu)
Remote control button
99
Auto Config.
Remote control button
40
Up
Remote control button
41
Down
Remote control button
06
Right
Remote control button
07
Left
Remote control button
44
OK
Remote control button
28
BACK
Remote control button
35
Code (Hex)
Function
Remarks
TILE
Remote control button
5B
EXIT
Remote control button
72
PICTURE ID ON (RED)
Remote control button
71
PICTURE ID OFF (GREEN)
Remote control button
63
YELLOW
Remote control Button
61
BLUE
Remote control button
B1
Remote control button
B0
Remote control button
BA
Remote control button
8F
Remote control button
8E
Remote control button
5F
W.BAL
Remote control button
3F
S.MENU
Remote control button
7C
HOME
Remote control button
97
SWAP
Remote control button
96
MIRROR
Remote control button
* Some key codes are not supported depending on the model.
ENGLISH
7B
36
ENGLISH
TO CONTROL MULTIPLE PRODUCTS
yy Only applies to certain models.
Use this method to connect several products to a single PC. You can control several products at a time by
connecting them to a single PC.
In the Option menu, the Set ID must be between 1 and 1000 without being duplicated.
Connecting the Cable
yy The image may be different according to the model.
Connect the RS-232C cable as shown in the picture.
The RS-232C protocol is used for communication between the PC and product. You can turn the product on
or off, select an input source or adjust the OSD menu from your PC.
Monitor 4
RS-232C
OUT
RS-232C
IN
Monitor 3
RS-232C
OUT
RS-232C
IN
Monitor 2
RS-232C
OUT
RS-232C
IN
RS-232C
OUT
RS-232C
IN
RS-232C Gender
4P Cable
(not included)
PC
Monitor 1
RS-232C Cable (not included)
Monitor 2
PC
Monitor 1
Monitor 3
RS-232C Cable
(not included)
Monitor 4
37
Baud Rate: 9600 BPS
Data Length: 8 bit
Parity Bit: None
Stop Bit: 1 bit
Flow Control: None
Communication Code: ASCII code
NOTE
yy When using three-wire connections (nonstandard), an IR daisy chain cannot be used.
yy Be sure to only use the provided gender to
connect properly.
yy When monitors connected via Daisy Chain (that
controls multiple monitors) are turned off and
on successively, some monitors may not turn
on. In this case, you can turn those monitors on
by pressing the MONITOR ON button, not the
POWER button.
(POWER)
MONITOR ON
BACK
TILE
ID
ON
OFF
EXIT
ENGLISH
Communication Parameter
38
ENGLISH
Command Reference List
COMMAND
DATA
1
2
(Hexadecimal)
01
Power
k
a
00 to 01
02
Select input
x
b
See Select Input
03
Aspect Ratio
k
c
See Aspect Ratio
04
Energy Saving
j
q
See Energy Saving
05
Picture Mode
d
x
See Picture Mode
06
Contrast
k
g
00 to 64
07
Brightness
k
h
00 to 64
08
Sharpness
k
k
00 to 32
09
Color
k
i
00 to 64
10
Tint
k
j
00 to 64
11
Color temperature
x
u
00 to 64
12
Balance
k
t
00 to 64
13
Sound Mode
d
y
See Sound Mode
14
Mute
k
e
00 to 01
15
Volume Control
k
f
00 to 64
16
Time 1 (year/month/day)
f
a
See Time 1
17
Time 2 (hour/minute/second)
f
x
See Time 2
18
Off time schedule
f
c
00 to 01
19
On Time Schedule
f
b
00 to 01
20
Off Timer (Repeat/Time)
f
e
See Off Timer
21
On Timer (Repeat/Time)
f
d
See On Timer
22
On Timer Input
f
u
Refer to On Timer Input.
23
No Signal Power Off (15Min)
f
g
00 to 01
24
Auto Power Off (4 Hours)
m
n
00 to 01
25
Language
f
i
See Language
26
Reset
f
k
00 to 02
27
Current Temperature
d
n
FF
28
Key
m
c
See Key
29
Time Elapsed
d
l
FF
30
Product Serial Number
f
y
FF
31
Software Version
f
z
FF
32
White Balance Red Gain
j
m
00 to FE
33
White Balance Green Gain
j
n
00 to FE
34
White Balance Blue Gain
j
o
00 to FE
35
White Balance Red Offset
s
x
00 to 7F
36
White Balance Green Offset
s
y
00 to 7F
37
White Balance Blue Offset
s
z
00 to 7F
38
Backlight
m
g
00 to 64
39
COMMAND
DATA
2
(Hexadecimal)
39
Screen off
k
d
00 to 01
40
Tile Mode
d
d
00 to FF
41
Check Tile Mode
d
z
FF
42
Tile ID
d
i
See Tile ID
43
Natural Mode
d
j
00 to 01
44
DPM Select
f
j
00 to 07
45
Remote Control/Local Key Lock
k
m
00 to 01
46
Power On Delay
f
h
00 to FA
47
Fail Over Select
m
i
00 to 02
48
Fail Over Input Select
m
j
See Fail Over Input Select
49
IR Operation
t
p
00 to 02
50
Local Key Operation
t
o
00 to 02
51
Check the status
s
v
See Check the status
52
Check Screen
t
z
00 to 01
53
Speakers
d
v
00 to 01
54
Daylight Saving Time
s
d
Refer to ‘Daylight Saving Time’
55
PM Mode
s
n, 0c
56
ISM Method
j
p
57
Network Settings
s
n, 80(81)(82)
58
Auto-adjustment
j
u
01
59
H Position
f
q
00 to 64
60
V Position
f
r
00 to 64
61
H Size
f
s
00 to 64
62
Power On Status
t
r
00 to 02
63
Wake On LAN
f
w
00 to 01
64
Intelligent Auto
t
i
00 to 01
65
OSD Portrait Mode
t
h
00 to 02
66
Reset to Initial Settings
t
n
00 to 01
67
Time Sync
s
n, 16
00 to 01
68
Contents Sync
t
g
00 to 01
69
Pivot Mode
t
a
00 to 01
70
Studio Mode
s
n, 83
00 to 01
71
LAN Daisy Chain
s
n, 84
00 to 01
72
Content Rotation
s
n, 85
00 to 02
73
DPM Wake up Control
s
n, 0b
00 to 01
74
Scan Inversion
s
n, 87
00 to 01
75
Beacon
s
n, 88
00 to 01
00 to 03
See ISM Method
See Network Settings
ENGLISH
1
40
COMMAND
DATA
ENGLISH
1
2
(Hexadecimal)
76
Aspect Ratio(Rotation)
s
n, 89
00 to 01
77
Easy Brightness Control Mode
s
m
00 to 01
78
Easy Brightness Control Schedule
s
s
See Easy Brightness Control Schedule
79
MultiScreen Mode & Input
x
c
See MultiScreen Mode & Input
80
Aspect Ratio(MultiScreen)
x
d
See Aspect Ratio(MultiScreen)
81
Screen Mute(MultiScreen)
x
e
See Screen Mute(MultiScreen)
82
Screen Off Always
s
n, 0d
00 to 01
83
Screen Video Freeze
k
x
00 to 01
84
Wireless Wake On LAN
s
n, 90
00 to 01
85
JustScan Toggle
s
n, 91
00 to 01
86
Holiday Schedule Mode
s
n, 1a
00 to 01
87
Holiday Schedule
s
n, 1b
See Holiday Schedule section
88
Dual Screen Off
s
n, 92
00 to 02
89
Fan Control
d
o
00 to 03
90
Fan Failure Check
d
w
FF
91
Luminance Value Read
m
u
FF
92
BLU Maintenance
m
t
00 to 01
93
Power Indicator Settings
f
o
00 to 01
94
OSD Display
k
l
00 to 01
95
Semi-Transparent Brightness
s
n, 95
00 to 64
96
Hybrid Mode
s
n, 96
00 to 02
97
Return Interval
s
n, 97
00 to 0a
98
Proximity Sensitivity
s
n, 98
00 to 02
99
HDMI IT Contents
s
n, 99
00 to 01
100
UPnP Mode
s
n, 9c
00 to 01
101
Model Name check
f
v
102
No Signal Image
s
n, a9
FF
00 to 01
* Note: C
ommands may not work when the external input is not used.
** Some commands may not be supported depending on the model.
41
Transmission
[Command1][Command2][ ][Set ID][ ][Data][Cr]
* [Command1]: identifies between the factory setting and the user setting modes.
* [Command2]: controls monitor sets.
* [Set ID]: U
sed for selecting a set you want to control. A unique Set ID can be assigned to each set ranging
from 1 to 1000(01H~3E8H) under Settings in the OSD menu.
Selecting ‘00H’ for Set ID allows the simultaneous control of all connected monitors.
(The maximum value may differ depending on the model.)
* [Data]: Transmits command data.
Data count may increase depending on the command.
* [Cr]: Carriage Return. Corresponds to ‘0x0D’ in ASCII code.
* [ ]: White Space. Corresponds to ‘0x20’ in ASCII code.
Acknowledgement
[Command2][ ][Set ID][ ][OK/NG][Data][x]
* The Product transmits ACK (acknowledgement) based on this format when receiving normal data. At this
time, if the data is FF, it indicates the present status data. If the data is in data write mode, it returns the data
of the PC computer.
* If a command is sent with Set ID ‘00’ (=0x00), the data is reflected to all monitor sets and each monitor set
does not send an acknowledgement (ACK).
* If the data value ‘FF’ is sent in control mode via RS-232C, the current setting value of a function can be
checked (only for some functions).
*Some commands are not supported depending on the model.
ENGLISH
Transmission/Reception Protocol
42
ENGLISH
01. Power (Command: k a)
Controls the power on/off of the set.
Transmission
[k][a][ ][Set ID][ ][Data][Cr]
Data
00: Off
01: On
Acknowledgement
[a][ ][Set ID][ ][OK/NG][Data][x]
*The acknowledgement signal is returned properly only when
the monitor is fully powered on.
* There may be a delay between the transmission and
acknowledgement signals.
02. Select Input (Command: x b)
Selects an input signal.
Transmission
[x][b][ ][Set ID][ ][Data][Cr]
Data
20: AV
40: COMPONENT
60: RGB
70: DVI-D (PC)
80: DVI-D (DTV)
90: HDMI1 (DTV)
A0: HDMI1 (PC)
91: HDMI2/OPS (DTV)
A1: HDMI2/OPS (PC)
92: OPS/HDMI3/DVI-D (DTV)
A2: OPS/HDMI3/DVI-D (PC)
95: OPS/DVI-D (DTV)
A5: OPS/DVI-D (PC)
96: HDMI3/DVI-D (DTV)
A6: HDMI3/DVI-D (PC)
98: OPS (DTV)
A8: OPS (PC)
C0: DISPLAYPORT (DTV)
D0: DISPLAYPORT (PC)
E0: SuperSign webOS Player
E1: Others
E2: Multi Screen
Acknowledgement
[b][ ][Set ID][ ][OK/NG][Data][x]
* Some input signals may not be supported depending on the
model.
** Returns to NG if the webOS Player is not distributed from
SuperSign W or SuperSign Premium.
03. Aspect Ratio (Command: k c)
Adjusts the aspect ratio.
Transmission
[k][c][ ][Set ID][ ][Data][Cr]
Data
01: 4:3
02: 16:9
04: Zoom
06: Set by Program
09: Just Scan (720p or higher)
10 to 1F: Cinema Zoom 1 to 16
21: 58:9
30: Vertical Zoom
31: All-Direction Zoom
* Available data types differ depending on the input signal. For
more information, see the aspect ratio section of the owner’s
manual.
* The aspect ratio may differ depending on the model’s input
configuration.
Acknowledgement
[c][ ][Set ID][ ][OK/NG][Data][x]
04. Energy Saving (Command: j q)
Sets the Energy Saving.
Transmission
[j][q][ ][Set ID][ ][Data][Cr]
Data
00: Off
01: Minimum
02: Medium
03: Maximum
04: Automatic
05: Screen off
Acknowledgement
[q][ ][Set ID][ ][OK/NG][Data][x]
** This may not be supported depending on the model.
43
08. Sharpness (Command: k k)
Adjusts the screen sharpness.
Transmission
[k][k][ ][Set ID][ ][Data][Cr]
Data
Data
00: Vivid
01: Standard
02: Cinema
03: Sports
04: Game
05: Expert 1
06: Expert 2
08: APS
09: Photos
10: Touch
11: Calibration
Acknowledgement
[x][ ][Set ID][ ][OK/NG][Data][x]
* Depending on the model, some picture modes may not be
supported.
06. Contrast (Command: k g)
Adjusts the screen contrast.
Transmission
[k][g][ ][Set ID][ ][Data][Cr]
Data
00 to 64: Contrast 0 to 100
Acknowledgement
[g][ ][Set ID][ ][OK/NG][Data][x]
07. Brightness (Command: k h)
Adjusts the screen brightness.
Transmission
[k][h][ ][Set ID][ ][Data][Cr]
Data
00 to 64: Brightness 0 to 100
Acknowledgement
[h][ ][Set ID][ ][OK/NG][Data][x]
00 to 32: Sharpness 0 to 50
Acknowledgement
[k][ ][Set ID][ ][OK/NG][Data][x]
09. Color (Command: k i)
Adjusts the screen color.
Transmission
[k][i][ ][Set ID][ ][Data][Cr]
Data
00 to 64: Color 0 to 100
Acknowledgement
[i][ ][Set ID][ ][OK/NG][Data][x]
10. Tint (Command: k j)
Adjusts the screen tint.
Transmission
[k][j][ ][Set ID][ ][Data][Cr]
Data
00 to 64: Tint red 50 to green 50
Acknowledgement
[j][ ][Set ID][ ][OK/NG][Data][x]
11. Color Temperature (Command: x u)
Adjusts the screen color temperature.
Transmission
[x][u][ ][Set ID][ ][Data][Cr]
Data
00 to 64: warm 50 to cool 50
Acknowledgement
[u][ ][Set ID][ ][OK/NG][Data][x]
ENGLISH
05. Picture Mode (Command: d x)
Selects a picture mode.
Transmission
[d][x][ ][Set ID][ ][Data][Cr]
44
ENGLISH
12. Balance (Command: k t)
Adjusts the sound balance.
Transmission
[k][t][ ][Set ID][ ][Data][Cr]
Data
00 to 64: left 50 to right 50
Acknowledgement
[t][ ][Set ID][ ][OK/NG][Data][x]
Transmission
[k][f ][ ][Set ID][ ][Data][Cr]
Data
00 to 64: Volume 0 to 100
Acknowledgement
[f ][ ][Set ID][ ][OK/NG][Data][x]
* It may not be supported depending on the model.
* It may not be supported depending on the model.
16. Time 1 (year/month/day) (Command: f a)
Sets the values of the Time 1 (year/month/day), or sets the
Auto time.
Transmission
1. [f ][a][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr]
2. [f ][a][ ][Set ID][ ][0][0][ ][Data1][ ][Cr]
13. Sound mode (Command: d y)
Selects a sound mode.
Transmission
[d][y][ ][Set ID][ ][Data][Cr]
Data
01: Standard
02: Music
03: Cinema
04: Sports
05. Game
07: News (Clear Voice III)
Acknowledgement
[y][ ][Set ID][ ][OK/NG][Data][x]
* It may not be supported depending on the model.
14. Mute (Command: k e)
Mutes/unmutes the sound.
Transmission
[k][e][ ][Set ID][ ][Data][Cr]
Data
00: Mute
01: Unmute
Acknowledgement
[e][ ][Set ID][ ][OK/NG][Data][x]
* It may not be supported depending on the model.
15. Volume Control (Command: k f)
Adjusts the playback volume.
1. Setting the Time 1 (year/month/day)
Data1
04~1B: year 2014 to 2037
Data2
01 to 0C: January to December
Data3
01 to 1F: 1st to 31st
* Enter "fa [Set ID] ff" to view the Time 1 (year/month/day)
settings.
2. Setting the Auto time
Data1
00: Auto
01: Manual
* To view the set value of the Auto time, enter “fa [Set ID] 00 ff”.
Acknowledgement
1. [a][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]
2. [a][ ][Set ID][ ][OK/NG][0][0][Data1][x]
17. Time 2 (hour/minute/second) (Command: f x)
Adjusts the Time 2 (hour/minute/second) value.
Transmission
[f ][x][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr]
Data1
00 to 17: 00 to 23 hours
Data2
00 to 3B: 00 to 59 minutes
Data3
00 to 3B: 00 to 59 seconds
* Enter “fx [Set ID] ff” to view the Time 2 (hour/minute/second)
settings.
** This function is only available when Time 1 (year/month/
day) is set.
Acknowledgement
[x][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]
45
20. Off Timer (Repeat/Time) (Command: f e)
Configures Off Timer (Repeat/Time) settings.
Transmission
[f ][e][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr]
Data
Data1
1. f1h to f7h (reading data)
F1: reads the 1st Off Timer data
F2: reads the 2nd Off Timer data
F3: reads the 3rd Off Timer data
F4: reads the 4th Off Timer data
F5: reads the 5th Off Timer data
F6: reads the 6th Off Timer data
F7: reads the 7th Off Timer data
2. e1h-e7h (delete one index), e0h (delete all indexes)
E0: erases all Off Timer settings
E1: erases the 1st Off Timer setting
E2: erases the 2nd Off Timer setting
E3: erases the 3rd Off Timer setting
E4: erases the 4th Off Timer setting
E5: erases the 5th Off Timer setting
E6: erases the 6th Off Timer setting
E7: erases the 7th Off Timer setting
3. 01h to 0Ch (sets the day of the week for the Off Timer)
01: Once
02. Daily
03: Mon - Fri
04: Mon - Sat
05: Sat - Sun
06. Every Sunday
07. Every Monday
08. Every Tuesday
09. Every Wednesday
0A. Every Thursday
0B. Every Friday
0C. Every Saturday
Data2
00 to 17: 00 to 23 hours
Data3
00 to 3B: 00 to 59 minutes
* To read or delete the Off Time Schedule list, [Data2][Data3]
must be set to FFH.
Example 1: fe 01 f1 ff ff – reads the first index data in Off Timer.
Example 2: fe 01 e1 ff ff - deletes the first index data from Off
Timer.
Example 3: fe 01 04 02 03 - sets Off Timer to 02:03 from
Monday to Saturday.
* This function is only available when Time 1 (year/month/day)
and Time 2 (hour/minute/second) are set.
00: Off
01: On
Acknowledgement
[c][ ][Set ID][ ][OK/NG][Data][x]
19. On Time Schedule (Command: f b)
Enables/disables the On Time schedule.
Transmission
[f ][b][ ][Set ID][ ][Data][Cr]
Data
00: Off
01: On
Acknowledgement
[b][ ][Set ID][ ][OK/NG][Data][x]
Acknowledgement
[e][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]
ENGLISH
18. Off Time Schedule (Command: f c)
Enables/disables the Off Time Schedule.
Transmission
[f ][c][ ][Set ID][ ][Data][Cr]
46
ENGLISH
21. On timer (Repeat/Time) (Command: f d)
Configures On Timer (Repeat/Time) settings.
Transmission
[f ][d][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr]
Data1
1. f1h to f7h (reading data)
F1: reads the 1st On Timer data
F2: reads the 2nd On Timer data
F3: reads the 3rd On Timer data
F4: reads the 4th On Timer data
F5: reads the 5th On Timer data
F6: reads the 6th On Timer data
F7: reads the 7th On Timer data
2. e1h-e7h (delete one index), e0h (delete all indexes)
E0: erases all On Timer settings
E1: erases the 1st On Timer setting
E2: erases the 2nd On Timer setting
E3: erases the 3rd On Timer setting
E4: erases the 4th On Timer setting
E5: erases the 5th On Timer setting
E6: erases the 6th On Timer setting
E7: erases the 7th On Timer setting
3. 01h to 0Ch (sets the day of the week for the On Timer)
01: Once
02. Daily
03: Mon - Fri
04: Mon - Sat
05: Sat - Sun
06. Every Sunday
07. Every Monday
08. Every Tuesday
09. Every Wednesday
0A. Every Thursday
0B. Every Friday
0C. Every Saturday
Data2
00 to 17: 00 to 23 hours
Data3
00 to 3B: 00 to 59 minutes
* To read or delete an On Time schedule list, [Data2][Data3]
must be set to FF.
Example 1: fd 01 f1 ff ff - reads the first index data from On
Timer.
Example 2: fd 01 e1 ff ff - deletes the first index data from On
Timer.
Example 3: fd 01 04 02 03 - sets On Timer to 02:03 from
Monday to Saturday.
* This function is only available when Time 1 (year/month/day)
and Time 2 (hour/minute/second) are set.
* This feature functions normally only after 22. On Timer Input
has been entered.
Acknowledgement
[d][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]
22. On Timer Input (Command: f u)
Select an external input for the current On Time setting and
add a new schedule.
Transmission
[f ][u][ ][Set ID][ ][Data1][Cr]
[f ][u][ ][Set ID][ ][Data1][][Data2][Cr]
Data (adding schedule)
40: COMPONENT
60: RGB
70: DVI-D
A0: HDMI1
A1: HDMI2/OPS
A2: OPS/HDMI3/DVI-D
A5: OPS/DVI-D
A6: HDMI3/DVI-D
A8: OPS
D0: DISPLAYPORT
Data1 (Read schedule)
1. f1h to f7h (Read data)
F1: Select the 1st schedule input
F2: Select the 2nd schedule input
F3: Select the 3rd schedule input
F4: Select the 4th schedule input
F5: Select the 5th schedule input
F6: Select the 6th schedule input
F7: Select the 7th schedule input
Data2 (Read schedule)
FF
* To read the schedule input, enter FF for [Data2].
If no schedule is available for [Data1] when attempting to
read the schedule data, the text ‘NG’ will be displayed and the
operation will fail.
(Example 1: fu 01 90 - Move each schedule input down one
row and save the 1st schedule input in HDMI mode.)
(Example 2: fu 01 f1 ff - Read the 1st schedule input.)
* This function is only supported when 1 (year/month/date), 2
(hour/minute/second) and On Time (repeat mode/time) are set.
* This feature operates as the last input.
* Input is possible in PC or DTV format during transmission
and output is in PC format for acknowledgment.
(e.g. For HDMI1, both 0x90 and 0xA can be input, while 0xA0
is printed for acknowledgment.)
** This may not be supported on some models.
Acknowledgement
[u][ ][Set ID][ ][OK/NG][Data][x]
[u][ ][Set ID][ ][OK/NG][Data1][Data2][x]
47
Data
00: Off
01: On
Acknowledgement
[g][ ][Set ID][ ][OK/NG][Data][x]
24. Auto Power Off (4 Hours) (Command: m n)
Sets the monitor to enter Auto Power Off after 4 hours.
Transmission
[m][n][ ][Set ID][ ][Data][Cr]
Data
00: Off
01: 4 hours
Acknowledgement
[n][ ][Set ID][ ][OK/NG][Data][x]
25. Language (Command: f i)
Sets the OSD language.
Transmission
[f ][i][ ][Set ID][ ][Data][Cr]
Data
00: Czech
01: Danish
02: German
03: English
04: Spanish (Europe)
05: Greek
06: French
07: Italian
08: Dutch
09: Norwegian
0A: Portuguese
0B: Portuguese (Brazil)
0C: Russian
0D: Finnish
0E: Swedish
0F: Korean
10: Chinese (Mandarin)
11: Japanese
12: Chinese (Cantonese)
13: Arabic
Acknowledgement
[i][ ][Set ID][ ][OK/NG][Data][x]
ENGLISH
23. No Signal Power Off (15Min) (Command: f g)
Sets the monitor to enter Automatic Standby mode if there is
no signal for 15 minutes.
Transmission
[f ][g][ ][Set ID][ ][Data][Cr]
48
ENGLISH
26. Reset (Command: f k)
Performs the reset function.
Screen Reset can only be performed in RGB input mode.
Transmission
[f ][k][ ][Set ID][ ][Data][Cr]
Data
00: Picture Reset
01: Screen reset
02: Initial Settings
Acknowledgement
[k][ ][Set ID][ ][OK/NG][Data][x]
29. Time Elapsed (Command: d l)
Checks the elapsed time.
Transmission
[d][l][ ][Set ID][ ][Data][Cr]
Data
FF: Read status
Acknowledgement
[l][ ][Set ID][ ][OK/NG][Data][x]
* The data received is shown as a hexadecimal value.
** It may not be supported depending on the model.
30. Product serial number (Command: f y)
Checks the serial number of the product.
Transmission
[f ][y][ ][Set ID][ ][Data][Cr]
Data
27. Current temperature (Command: d n)
Checks the inside temperature.
Transmission
[d][n][ ][Set ID][ ][Data][Cr]
FF: Check product serial number
Acknowledgement
[y][ ][Set ID][ ][OK/NG][Data][x]
* Data is in ASCII code.
Data FF: Check the status
Acknowledgement
[n][ ][Set ID][ ][OK/NG][Data][x]
* Temperature is displayed as a hexadecimal value.
31. Software Version (Command: f z)
Checks the software version of the product.
Transmission
[f ][z][ ][Set ID][ ][Data][Cr]
Data
28. Key (Command: m c)
Sends a key code for the IR remote control.
Transmission
[m][c][ ][Set ID][ ][Data][Cr]
Data
IR_KEY_CODE
Acknowledgement
[c][ ][Set ID][ ][OK/NG][Data][x]
For key codes, see IR Codes.
* Some key codes are not supported depending on the model.
FF: Check software version
Acknowledgement
[z][ ][Set ID][ ][OK/NG][Data][x]
32. White balance red gain (Command: j m)
Adjusts the white balance red gain value.
Transmission
[j][m][ ][Set ID][ ][Data][Cr]
Data
00 to FE: Red Gain 0 to 254
FF: checks the red gain value
Acknowledgement
[m][ ][Set ID][ ][OK/NG][Data][x]
49
Data
00 to FE: Green Gain 0 to 254
FF: checks the green gain value
Acknowledgement
[n][ ][Set ID][ ][OK/NG][Data][x]
34. White Balance Blue Gain (Command: j o)
Adjusts the white balance blue gain value.
Transmission
[j][o][ ][Set ID][ ][Data][Cr]
Data
00 to FE: Blue Gain 0 to 254
FF: checks the blue gain value
Acknowledgement
[o][ ][Set ID][ ][OK/NG][Data][x]
35. White Balance Red Offset (Command: s x)
Adjusts the white balance red offset value.
Transmission
[s][x][ ][Set ID][ ][Data][Cr]
Data
00 to 7F: Red Offset 0 to 127
FF: checks the red offset value
Acknowledgement
[x][ ][Set ID][ ][OK/NG][Data][x]
36. White Balance Green Offset (Command: s y)
Adjusts the white balance green offset value.
Transmission
[s][y][ ][Set ID][ ][Data][Cr]
Data
00 to 7F: Green Offset 0 to 127
FF: checks the green offset value
Acknowledgement
[y][ ][Set ID][ ][OK/NG][Data][x]
37. White Balance Blue Offset (Command: s z)
Adjusts the white balance blue offset value.
Transmission
[s][z][ ][Set ID][ ][Data][Cr]
Data
00 to 7F: Blue Offset 0 to 127
FF: checks the blue offset value
Acknowledgement
[z][ ][Set ID][ ][OK/NG][Data][x]
38. Backlight (Command: m g)
Adjusts the backlight brightness.
Transmission
[m][g][ ][Set ID][ ][Data][Cr]
Data
00 to 64: Backlight 0 to 100
Acknowledgement
[g][][set ID][][OK/NG][Data][x]
ENGLISH
33. White Balance Green Gain (Command: j n)
Adjusts the white balance green gain value.
Transmission
[j][n][ ][Set ID][ ][Data][Cr]
50
ENGLISH
39. Screen Off (Command: k d)
Turns the screen on or off.
Transmission
[k][d][ ][Set ID][ ][Data][Cr]
Data
00: turns the screen on
01: turns the screen off
Acknowledgement
[d][ ][Set ID][ ][OK/NG][Data][x]
** This may not be supported on some models.
** Dual-screen models must use the screen off commands
in 88. Dual Screen Off.
40. Tile Mode (Command: d d)
Sets the Tile Mode and sets values for the tile rows and
columns.
Transmission
[d][d][ ][Set ID][ ][Data][Cr]
Data
00 to FF: The first byte - tile column
The second byte - tile row
* 00, 01, 10, and 11 mean that the tile mode is off
** The maximum value may differ depending on the model.
Acknowledgement
[d][ ][Set ID][ ][OK/NG][Data][x]
* It may not be supported depending on the model.
41. Check Tile Mode (Command: d z)
Checks the tile mode.
Transmission
[d][z][ ][Set ID][ ][Data][Cr]
Data
FF: checks the tile mode
Acknowledgement
[z][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]
Data1
00: tile mode off
01: tile mode on
Data2 00 to 0F: tile column
Data3 00 to 0F: tile row
* It may not be supported depending on the model.
42. Tile ID (Command: d i)
Sets the tile ID value of the product.
Transmission
[d][i][ ][Set ID][ ][Data][Cr]
Data
01 to E1: Tile ID 1 to 225**
FF: checks the tile ID
** The data value cannot exceed the value of row x
column.
Acknowledgement
[i][ ][Set ID][ ][OK/NG][Data][x]
* When a data value that exceeds the value of row x
column is entered (except 0xFF),
ACK becomes NG.
* It may not be supported depending on the model.
43. Natural Mode (in Tile mode) (Command: d j)
When displaying the image naturally, the part of the image that
would normally be displayed in the gap between the monitors
is omitted.
Transmission
[d][j][ ][Set ID][ ][Data][Cr]
Data
00: Off
01: On
Acknowledgement
[j][ ][Set ID][ ][OK/NG][Data][x]
* It may not be supported depending on the model.
44. DPM Select (Command: f j)
To set the DPM (Display Power Management) function.
Transmission
[f ][j][ ][Set ID][ ][Data][Cr]
Data
00: Off
01: 5 seconds
02: 10 seconds
03: 15 seconds
04: 1 minutes
05: 3 minutes
06: 5 minutes
07: 10 minutes
Acknowledgement
[j][ ][Set ID][ ][OK/NG][Data][x]
51
Data
00: Off (Lock Off)
01: On (Lock On)
* When the monitor is turned off, the power key works
even in On (01) mode.
Acknowledgement
[m][ ][Set ID][ ][OK/NG][Data][x]
46. Power On Delay (Command: f h)
Sets the schedule delay when the power turns on. (unit:
seconds).
Transmission
[f ][h][ ][Set ID][ ][Data][Cr]
Data
00 to FA: min. 0 to maximum 250 (seconds)
* The maximum value may differ depending on the model.
Acknowledgement
[h][ ][Set ID][ ][OK/NG][Data][x
47. Fail Over Select (Command: m i)
Selects an input mode for auto switch.
Transmission
[m][i][ ][Set ID][ ][Data][Cr]
Data
00: Off
01: Auto
02: Manual
Acknowledgement
[i][ ][Set ID][ ][OK/NG][Data][x]
48. Fail Over Input Select (Command: m j)
Selects an input source for auto switch.
* This command is only available when the Fail Over (auto)
mode is set to Custom.
Transmission
[m][j][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][ ]
[Data4]...[ ][DataN][Cr]
Data 1 to N-1 (Input priority: 1 to N-1)
40: COMPONENT
60: RGB
70: DVI-D
90: HDMI1
91: HDMI2/OPS
92: OPS/HDMI3/DVI-D
95: OPS/DVI-D
96: HDMI3/DVI-D
98: OPS
C0: DISPLAYPORT
Data N: E0: INTERNAL Memory
E1: USB
E2: SD CARD
Acknowledgement
[j][ ][SetID][ ][OK/NG][Data1][Data2][Data3][Data4]
...[DataN] [x]
* Some input signals may not be supported on some
models.
* The data number (N) may vary depending on the model.
(The data number depends on the number of supported
input signals.)
* Only values under Data N (e.g. E0, E1, E2) are
allowed as the last data value and may not be supported
depending on the model.
* This feature operates as the last input and supports data
in DTV format.
ENGLISH
45. Remote Control/Local Key Lock (Command: k m)
Adjusts the remote control/local key (front) lock.
Transmission
[k][m][ ][Set ID][ ][Data][Cr]
52
ENGLISH
49. IR Operation (Command: t p)
Configures the IR operation settings of the product.
Transmission
[t][p][ ][Set ID][ ][Data][Cr]
Data
00: locks off all of the keys
01: locks on all of the keys except the Power key
02: locks on all of the keys
Acknowledgement
[x][ ][Set ID][ ][OK/NG][Data][x]
* When the monitor is turned off, the power key works
even in the locks on all of the keys (02) mode.
50. Local Key Operation (Command: t o)
Configures the local key operation settings of the product.
Transmission
[t][o][ ][Set ID][ ][Data][Cr]
Data
00: locks off all of the keys
01: locks on all of the keys except the Power key
02: locks on all of the keys
Acknowledgement
[o][ ][Set ID][ ][OK/NG][Data][x]
* When the monitor is turned off, the power key works
even in the locks on all of the keys (02) mode.
Data:
Data1
03 (when checking the PM mode)
00: The PM mode is set to Screen On
01: The PM mode is set to Screen Off
02: The PM mode is set to Screen Off Always
03: In Sustain Aspect Ratio mode.
04: Screen Off & Backlight status (Outdoor mode)
Data: 05 (In the case of checking whether the luminance
sensors work properly)
Data1 00: All normal
01: BLU sensor 1 normal, BLU sensor 2 down
02: BLU sensor 1 down, BLU sensor 2 normal
03: All sensors down
Data: 06 (In the case of the luminance sensors being
used)
Data1 00: Luminance sensor 1 is being used
01: Luminance sensor 2 is being used
Data: 07 (In the case of checking whether the Top, Bottom
and Main temperature sensors are functioning
normally)
Data1 00: All temperature sensors are faulty.
01: Top normal, Bottom faulty, Main faulty
02: Top faulty, Bottom normal, Main faulty
03: Top normal, Bottom normal, Main faulty
04: Top faulty, Bottom faulty, Main normal
05: Top normal, Bottom faulty, Main normal
06: Top faulty, Bottom normal, Main normal
07: All temperature sensors are normal
Data:
10 (Check Screen)
Data1 00: Check Screen result NG
07: Check Screen result OK
*In 75XE3C models, the status will be displayed as normal if
both the Top (Panel) and Top (PSU) are normal.
* Sets to NG when Check Screen is set to Off or not supported.
51. Status (Command: s v)
Checks the current signal status of the product.
Transmission
[s][v][ ][Set ID][ ][Data][ ][FF][Cr]
Data
02: checks whether there is a signal or not
03: check the PM mode.
05: C
hecks whether luminance sensors 1 and 2
work properly.
06: Luminance sensor being used:
07: C
hecks whether the Top, Bottom and Main
temperature sensors are functioning normally.
08: The temperature of each temperature sensor
when the monitor set was last powered off.
09: Fan Speed
10: RGB sensing OK/NG (Check Screen)
Acknowledgement
[v][ ][Set ID][ ][OK/NG][Data][Data1][x]
Data:
Data1
02 (when a signal is found)
00: no signal
01: there is a signal
Data: 08 (In the case of checking the temperature of each
temperature sensor when the monitor set was
last powered off)
Acknowledgement
[v][ ][Set ID][ ][OK/NG][Data][Data1][Data2]
[Data3][x]
Data1: The temperature of the Top sensor when the
monitor set was last powered off.
Data2: The temperature of the Bottom sensor when the
monitor set was last powered off.
Data3: The temperature of the Main sensor when the
monitor set was last powered off.
Data: 09 (In the case of Fan Speed)
Acknowledgement
[v][ ][Set ID][ ][OK/NG][Data][Data1][Data2][x]
Data1: 00-ff: The upper 1-byte of the fan speed
Data2: 00-ff: The lower 1-byte of the fan speed
Fan speed: 0 to 2008 in hexadecimal and 0 to 8200 in
decimal
** This may not be supported on some models.
53
Data
00: Off
01: On
Acknowledgement
[z][ ][Set ID][ ][OK/NG][Data][x]
55. PM Mode (Command: s n, 0c)
Selects the desired PM mode option.
Transmission
[s][n][ ][Set ID][ ][0c][ ][Data][Cr]
Data
** It may not be supported depending on the model.
00: Sets the Power Off mode.
01: Sets the Sustain Aspect Ratio mode.
02: Sets the Screen Off mode.
03: Sets the Screen Off Always mode.
04: Sets the Screen Off & Backlight mode
(Outdoor mode)
Acknowledgement
[n][ ][Set ID][ ][OK/NG][0c][Data][x]
53. Speaker (Command: d v)
Sets the speaker function.
Transmission
[d][v][ ][Set ID][ ][Data][Cr]
Data
00: Off
01: On
Acknowledgement
[v][ ][Set ID][ ][OK/NG][Data][x]
** It may not be supported depending on the model.
54. Daylight Saving Time (Command: s d)
To set the Daylight Saving Time function.
Transmission
[s][d][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][ ][Data4]
[ ][Data5][Cr]
Data
00: Off (Data2~5: FFH)
01: Start Time
02: End Time
Data2 01~0C: January to December
Data3 01~06: 1 ~ 6th week
* The maximum number of [Data3] differs depending on
Date.
Data4 00~06 ( Sun. ~ Sat. )
Data5 00~17: 00 ~ 23 hours
* To read the Start Time/End Time, enter FFH for
[Data2]~[Data5].
(ex1: sd 01 01 ff ff ff ff - To check the Start Time
ex2: sd 01 02 ff ff ff ff - To check the End Time)
* This function is supported only when 1 (Year/Month/ Day)
and 2 (Hour/Minute/Second) are set.
Acknowledgement
[d][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][Data4]
[Data5][x]
** It may not be supported depending on the model.
* It may not be supported depending on the model.
56. ISM Method (Command: j p)
Selects the ISM Method option.
Transmission
[j][p][ ][Set ID][ ][Data][Cr]
Data
01: Inversion
02: Orbiter
04: White Wash
08: Normal
20: Color Wash
80: Washing Bar
90: User Image
91: User Video
** The jp command works when Timer is set to Immediately.
Acknowledgement
[p][ ][Set ID][ ][OK/NG][Data][x]
* It may not be supported depending on the model.
ENGLISH
52. Check Screen (Command: t z)
Sets Check Screen.
Transmission
[t][z][ ][Set ID][ ][Data][Cr]
54
ENGLISH
57. Network Settings (Command: s n, 80 or 81 or 82)
Configures network and DNS settings.
Transmission
[s][n][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][ ][Data4][ ]
[Data5][Cr]
Data1
80: Configures/views the temporary IP mode
(Auto/Manual), subnet mask, and gateway.
81: Configures/views the temporary DNS
address.
82: Saves temporary settings and views
information about the current network.
* If Data1 is 80,
Data2 00: Auto
01: Manual
FF: V
iews the temporary IP mode (Auto/Manual),
subnet mask, and gateway.
** If Data2 is 01 (Manual),
Data3 : Manual IP address
Data4 : Subnet mask address
Data5 : Gateway address
* If Data1 is 81,
Data2 : DNS address
FF: Views the temporary DNS address.
* If Data1 is 82,
Data2 80: Applies the temporarily saved IP mode (Auto/
Manual), subnet mask, and gateway.
81: Applies the temporary DNS address
FF: Information on the current
network (IP, subnet gateway,
DNS)
*** Examples of settings
1. Auto: sn 01 80 00
2. Manual: sn 01 80 01 010177223241 255255254000
010177222001 (IP: 10.177.223.241, subnet:
255.255.254.0,
gateway: 10.177.222.1)
3. Network read: sn 01 80 ff
4. DNS setting: sn
01 81 156147035018
(DNS: 156.147.35.18)
5. Applying the settings: sn 01 82 80 (applies the saved
IP mode (auto/manual), subnet
mask, and gateway)
sn 01 82 81 (applies the saved
DSN)
**** Each IP address contains 12 decimal digits .
Acknowledgement
[n][ ][Set ID][ ][OK/NG][Data1][Data][x]
* It may not be supported depending on the model.
** This feature is available only for wired networks.
58. Auto-adjustment (Command: j u)
Automatically corrects the position and shaking of the picture.
(Works only in RGB-PC input mode.)
Transmission
[j][u][ ][Set ID][ ][Data][Cr]
Data
01: Execution
Acknowledgement
[u][ ][Set ID][ ][OK/NG][Data][x]
* It may not be supported depending on the model.
59. H Position (Command: f q)
Adjusts the horizontal position of the screen. This feature only
works when the Tile Mode is set to Off.
* The operational range varies depending on the RGB input
resolution. (Works only in RGB-PC input mode.)
Transmission
[f ][q][ ][Set ID][ ][Data][Cr]
Data
00-64: Min -50 (Left) to Max 50 (Right)
Acknowledgement
[q][ ][Set ID][ ][OK/NG][Data][x]
* It may not be supported depending on the model.
55
Data
63. Wake On LAN (Command: f w)
Selects the desired Wake On LAN option.
Transmission
[f ][w][ ][Set ID][ ][Data][Cr]
Data
00-64: Min -50 (Down) to Max 50 (Up)
Acknowledgement
[r][ ][Set ID][ ][OK/NG][Data][x]
00: Off
01: On
Acknowledgement
[w][ ][Set ID][ ][OK/NG][Data][x]
* It may not be supported depending on the model.
61. H Size (Command: f s)
Adjusts the horizontal size of the screen. This feature only
works when the Tile Mode is set to Off.
* The operational range varies depending on the RGB input
resolution. (Works only in RGB-PC input mode.)
Transmission
[f ][s][ ][Set ID][ ][Data][Cr]
Data
00-64: Min -50 (Small) to Max 50 (Large)
Acknowledgement
[s][ ][Set ID][ ][OK/NG][Data][x]
64. Intelligent Auto (Command: t i)
Selects the desired Intelligent Auto option.
Transmission
[t][i][ ][Set ID][ ][Data][Cr]
Data
00: Off
01: On
Acknowledgement
[i][ ][Set ID][ ][OK/NG][Data][x]
* It may not be supported depending on the model.
* It may not be supported depending on the model.
62. Power On Status (Command: t r)
Selects the desired Power On status option.
Transmission
[t][r][ ][Set ID][ ][Data][Cr]
65. OSD Portrait Mode (Command: t h)
Selects the desired Portrait mode option.
Transmission
[t][h][ ][Set ID][ ][Data] [Cr]
Data
Data
00: LST (Stays in the previous status)
01: STD (Stays powered off)
02: PWR (Stays powered on)
Acknowledgement
[r][ ][Set ID][ ][OK/NG][Data][x]
00: Off
01: 90 degrees
02: 270 degrees
03: 180 degrees
Acknowledgement
[h][ ][Set ID][ ][OK/NG][Data] [x]
* It may not be supported depending on the model.
ENGLISH
60. V Position (Command: f r)
Adjusts the vertical position of the screen. This feature only
works when the Tile Mode is set to Off.
* The operational range varies depending on the RGB input
resolution. (Works only in RGB-PC input mode.)
Transmission
[f ][r][ ][Set ID][ ][Data][Cr]
56
ENGLISH
66. Reset to Initial Settings (Command: t n)
Enables/disables the Reset to Initial settings.
Transmission
[t][n][ ][Set ID][ ][Data] [Cr]
69. Pivot Mode (Command: t a)
Sets Pivot Mode to on/off.
Transmission
[t][a][ ][Set ID][ ][Data][Cr]
Data
Data
00: Disables the settings.
01: Enables the settings.
Acknowledgement
[n][ ][Set ID][ ][OK/NG][Data] [x]
* It may not be supported depending on the model.
00: Off
01: On
Acknowledgement
[a][ ][Set ID][ ][OK/NG][Data][x]
* This feature may not be supported in certain models.
67. Time Sync (Command: s n, 16)
Configures the Time Sync.
Transmission
[s][n][ ][Set ID][ ][1][6][ ][Data][Cr]
Data
00: Off
01: On
* This feature works in the Master mode.
** This feature does not work if the current time is not set.
Acknowledgement
[n][ ][Set ID][ ][OK/NG][ ][1][6][ ][Data][x]
70. Studio Mode (Command: s n, 83)
Sets Studio Mode to on/off.
Transmission
[s][n][ ][Set ID][ ][8][3][ ][Data][Cr]
Data
00: Off
01: On
Acknowledgement
[n][ ][Set ID][ ][OK/NG][8][3][Data][x]
* This feature may not be supported in certain models.
* It may not be supported depending on the model.
71. LAN Daisy Chain (Command: s n, 84)
Sets LAN Daisy Chain to on/off.
Transmission
[s][n][ ][Set ID][ ][8][4][ ][Data][Cr]
68. Contents Sync (Command: t g)
Configures the Contents Sync.
Transmission
[t][g][ ][Set ID][ ][Data][Cr]
Data
Data
* This feature may not be supported in certain models.
00: Off
01: On
Acknowledgement
[g][ ][Set ID][ ][OK/NG][Data][x]
* It may not be supported depending on the model.
00: Off
01: On
Acknowledgement
[n][ ][Set ID][ ][OK/NG][8][4][Data][x]
72. Content Rotation (Command: s n, 85)
Sets Content Rotation to on/off.
Transmission
[s][n][ ][Set ID][ ][8][5][ ][Data][Cr]
Data
00: Off
01: 90 degrees
02: 270 degrees
03: 180 degrees
Acknowledgement
[n][ ][Set ID][ ][OK/NG][8][5][Data][x]
* This feature may not be supported in certain models.
57
77. Easy Brightness Control Mode (Command: s m)
Selects whether to turn on/off Easy Brightness Control Mode.
Transmission
[s][m][ ][Set ID][ ][Data][Cr]
Data
Data
00: Easy Brightness Control off
01: Easy Brightness Control on
* This feature does not work if the current time is not set.
00: Clock
01: Clock+DATA
Acknowledgement
[n][ ][Set ID][ ][OK/NG][0][b][Data][x]
* This feature may not be supported in certain models.
74. Scan Inversion (Command: s n, 87)
Sets Scan Inversion to on/off.
Transmission
[s][n][ ][Set ID][ ][8][7][ ][Data][Cr]
Data
00: Off
01: On
Acknowledgement
[n][ ][Set ID][ ][OK/NG][8][7][Data][x]
* This feature may not be supported in certain models.
75. Beacon (Command: s n, 88)
Sets Beacon to on/off.
Transmission
[s][n][ ][Set ID][ ][8][8][ ][Data][Cr]
Data
00: Off
01: On
Acknowledgement
[n][ ][Set ID][ ][OK/NG][8][8][Data][x]
* This feature may not be supported in certain models.
76. Aspect Ratio (Rotation) (Command: s n, 89)
Controls the Aspect Ratio (Rotation) screen.
(This command works only when Content Rotation is on.)
Transmission
[s][n][ ][Set ID][ ][8][9][ ][Data][Cr]
Data
00: Full
01: Original
Acknowledgement
[n][ ][Set ID][ ][OK/NG][8][9][Data][x]
* This feature may not be supported in certain models.
** This may not be supported on some models.
Acknowledgement
[m][ ][Set ID][ ][OK/NG][Data][x]
ENGLISH
73. DPM Wake up Control (Command: s n, 0b)
Sets the DPM Wake up Control Mode.
Transmission
[s][n][ ][Set ID][ ][0][b][ ][Data][Cr]
58
ENGLISH
78. Easy Brightness Control Schedule (Command: s s)
Sets Easy Brightness Control schedules.
Transmission
[s][s][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr]
Data1
1. F1–F6 (reads data)
F1: Reads the 1st data from the Easy Brightness Control
F2: Reads the 2nd data from the Easy Brightness Control
F3: Reads the 3nd data from the Easy Brightness Control
F4: Reads the 4th data from the Easy Brightness Control
F5: Reads the 5th data from the Easy Brightness Control
F6: Reads the 6th data from the Easy Brightness Control
2. FF: Reads all stored lists
3. e1-e6 (deletes one index); e0 (deletes all indexes)
E0: Deletes all Easy Brightness Control.
E1: Deletes the 1st Easy Brightness Control.
E2: Deletes the 2nd Easy Brightness Control.
E3: Deletes the 3rd Easy Brightness Control.
E4: Deletes the 4th Easy Brightness Control.
E5: Deletes the 5th Easy Brightness Control.
E6: Deletes the 6th Easy Brightness Control.
4. 00 to 17: 00th to 23th hour
Data2
00 to 3B: 00th to 59th minute
Data3
00 to 64: Backlight, 0 to 100
* If you want to read or delete the configured Easy Brightness
Control lists, set [Data2][Data3] to FF.
* If you want to import all the configured Easy Brightness
Control lists through FF, do not enter any values in [Data2]
[Data3].
* When all the configured Easy Brightness Control lists are
imported through FF, OK is acknowledged even if there is
no stored list.
Example 1: ss 01 f1 ff ff - Reads the first index data from the
Easy Brightness Control.
Example 2: ss 01 ff - Reads all index data from the Easy
Brightness Control.
Example 3: ss 01 e1 ff ff - Deletes the first index data from the
Easy Brightness Control.
Example 4: ss 01 07 1E 46 - Adds a schedule whose time is
07:30 and whose backlight is 70.
Acknowledgement
[s][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]
* This feature may not be supported in certain models.
79. MultiScreen Mode & Input (Command: x c)
Saves or controls the MultiScreen Mode and input.
Transmission
[x][c][ ][Set ID][ ][Data1][ ][Data2][ ][Data3[ ][Data4]
[ ][Data5[ ]Cr]
Data1 (sets the MultiScreen Mode)
10: PIP
22: PBP2
23: PBP3
24: PBP4
Data2 (sets the MultiScreen Main Input)
Data3 (sets the MultiScreen Sub1 Input)
Data4 (sets the MultiScreen Sub2 Input)
Data5 (sets the MultiScreen Sub3 Input)
20: AV
40: COMPONENT
60: RGB
80: DVI-D
90: HDMI1
91: HDMI2/OPS
92: OPS/HDMI3/DVI-D
95: OPS/DVI-D
96: HDMI3/DVI-D
98: OPS
C0: DISPLAYPORT
Acknowledgement
[c][ ][Set ID][ ][OK/NG][ ][Data1][Data2][Data3]
[Data4] [Data5][x]
* This feature may not be supported in certain models.
** Only the input modes supported by the model works.
*** This feature operates as the last input, and supports data
in DTV format.
80. Aspect Ratio (MultiScreen) (Command: x d)
Saves or controls the Aspect Ratio (MultiScreen) screen.
Transmission
[x][d][ ][Set ID][ ][Data1][ ][Data2][Cr]
Data1
01: Controls the Main input
02: Controls the Sub1 input
03: Controls the Sub2 input
04: Controls the Sub3 input
Data2
00: Full
01: Original
Acknowledgement
[d][ ][Set ID][ ][OK/NG][Data1][Data2][x]
* This feature may not be supported in certain models.
59
Data1
01: Controls the Main input
02: Controls the Sub1 input
03: Controls the Sub2 input
04: Controls the Sub3 input
Data2
00: Turns the screen on.
01: Turns the screen off.
* This function works when the Multi Screen App is running.
** This function may not work properly if there is no signal.
Acknowledgement
[e][ ][Set ID][ ][OK/NG][Data1][Data2][x]
84. Wireless Wake-on-LAN (Command: s n, 90)
Sets Wireless Wake-on-LAN.
Transmission
[s][n][ ][Set ID][ ][9][0][ ][Data][Cr]
Data
00: Off
01: On
Acknowledgement
[n][ ][Set ID][ ][OK/NG][9][0][Data][x]
* This feature may not be supported in certain models.
* This feature may not be supported in certain models.
82. Screen Off Always (Command: s n, 0d)
Screen Off Always has the same effect as entering the Screen
Off menu regardless of the PM Mode setting.
Transmission
[s][n][ ][Set ID][ ][0][d][ ][Data][Cr]
Data
00: Off
01: On
Acknowledgement
[n][ ][Set ID][ ][OK/NG][0][d][Data][x]
85. JustScan Toggle (Command: s n, 91)
Sets JustScan.
Transmission
[s][n][ ][Set ID][ ][9][1][ ][Data][Cr]
Data
00 : Off
01 : On
Acknowledgement
[n][ ][Set ID][ ][OK/NG][9][1][Data][x]
* This feature may not be supported in certain models.
* This feature may not be supported in certain models.
83. Screen Video Freeze (Command: k x)
Turns on/off the video freeze function.
Transmission
[k][x][ ][Set ID][ ][Data][Cr]
Data
00: Turns on the freeze function.
01: Turns off the freeze function.
* Available in single input mode.
Acknowledgement
[x][ ][Set ID][ ][OK/NG][Data][x]
* This feature may not be supported in certain models.
86. Holiday Schedule Mode (Command: s n, 1a)
Turns Holiday Schedule mode on or off.
Transmission
[s][n][ ][Set ID][ ][1][a][ ][Data][Cr]
Data
00: Holiday Schedule off
01: Holiday Schedule on
* This feature does not work if the current time is not set.
** Depending on the model, this feature may not be supported.
Acknowledgement
[n][ ][Set ID][ ][OK/NG][ ][1][a][ ][Data][x]
ENGLISH
81. Screen Mute (MultiScreen) (Command: x e)
Turns on/off each screen in MultiScreen.
Transmission
[x][e][ ][Set ID][ ][Data1][ ][Data2][Cr]
60
ENGLISH
87. Holiday Schedule (Command: s n, 1b)
Configures the Holiday Schedule.
Transmission
[s][n][ ][Set ID] ][ ][1][a]
[ ][Data1][ ][Data2][ ][Data3] [ ][Data4] [Cr]
Data1
1. f1–f7 (Data Reading Functions)
f1: Reads data of 1st Holiday Schedule
f2: Reads data of 2nd Holiday Schedule
f3: Reads data of 3rd Holiday Schedule
f4: Reads data of 4th Holiday Schedule
f5: Reads data of 5th Holiday Schedule
f6: Reads data of 6th Holiday Schedule
f7: Reads data of 7th Holiday Schedule
2. FF: Reads all stored lists
3. e1–e7 (Deletes one index), e0 (Deletes all indexes)
e0: Deletes all Holiday Schedules
e1: Deletes 1st Holiday Schedule
e2: Deletes 2nd Holiday Schedule
e3: Deletes 3rd Holiday Schedule
e4: Deletes 4th Holiday Schedule
e5: Deletes 5th Holiday Schedule
e6: Deletes 6th Holiday Schedule
e7: Deletes 7th Holiday Schedule
4. 01–0c: Month 01 to 12 (Start Month)
Data2
01–1F: Day 01 to 31 (Start Day)
Data3
01–0c: Month 01 to 12 (End Month)
Data4
01–1F: Day 01 to 31 (End Day)
* If you want to read or delete the configured Holiday Schedule
lists, set [Data2][Data3][Data4] to FF.
* When reading all configured Holiday Schedule lists, set
[Data1][Data2][Data3][Data4] to FF.
ex1: sn 01 1b f1 ff ff ff – Reads the 1st index data in the
Holiday Schedule.
ex2: sn 01 1b ff ff ff ff – Reads all index data in the Holiday
Schedule.
ex3: sn 01 1b e1 ff ff ff – Deletes the 1st index data in the
Holiday Schedule.
ex4: sn 01 1b 01 07 0c 18 – Adds Holiday Schedule from
January 7 to December 24.
* Schedules set beforehand are not added.
* This feature does not work if the current time is not set.
** Depending on the model, this feature may not be supported.
Acknowledgement
[s][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]
88. Dual Screen Off (Command: s n, 92)
Turn Dual Screen On or Off.
Transmission
[s][n][ ][Set ID][ ][9][2][ ][Data][Cr]
Data
00 : MainScreen – On / SubScreen – On
01 : MainScreen – Off / SubScreen – On
02 : MainScreen – On / SubScreen – Off
Acknowledgement
[n][ ][Set ID][ ][OK/NG][9][2][Data][x]
* This feature may not be supported in certain models.
89. Fan control (Command: d o)
Sets the fan mode.
Transmission
[d][o][ ][Set ID][ ][Data][Cr]
Data
00: Auto
01: On
02: Manual
03: Off
** This may not be supported on some models.
Acknowledgement
[o][ ][Set ID][ ][OK/NG][Data][x]
90. Fan Failure Check (Command: d w)
Checks for fan failures.
Transmission
[d][w][ ][Set ID][ ][Data][Cr]
Data
FF: Read status
Acknowledgement
[w][ ][Set ID][ ][OK/NG][Data1] [Data2] [x]
Data 1
Data2
00: One or more fans are faulty.
01: All fans are normal.
02: The model has no fan.
00: No fan is faulty (all fans are normal).
01: 1 fan is faulty.
02: 2 fans are faulty.
03: 3 fans are faulty.
04: 4 fans are faulty.
05: 5 fans are faulty.
06: 6 fans are faulty.
07: 7 fans are faulty.
08: 8 fans are faulty.
09: 9 fans are faulty.
0A: 10 fans are faulty.
61
Acknowledgement
[u][][SetID][][OK/NG][Data1][Data2][Data3]
[Data4][Data5][Data6][Data7][x]
Data1
Data2
00–64: The Backlight PWM value (0 to 100)
00–ff: The upper 1-byte of the value measured by
the CA210.
Data3
00–ff: The lower 1-byte of the value measured by
the CA210.
CA210 measurement: 0000 to ffff in hexadecimal and 0 to
65535 in decimal.
Data4
00–ff: The upper 1-byte of the value measured by
BLU 1 sensor.
Data5
00–ff: The lower 1-byte of the value measured by
BLU 1 sensor.
Data6
00–ff: The upper 1-byte of the value measured by
BLU 2 sensor.
Data7
00–ff: The lower 1-byte of the value measured by
BLU 2 sensor.
BLU measurement: 0000 to ffff in hexadecimal and 0 to 65535
in decimal.
* During final assembly, a CA210 measurement is entered
through the calibration procedure. The default value, before
calibration, is 0.
** This may not be supported on some models.
92. BLU Maintenance (Command: m t)
Selects whether to turn on/off BLU Maintenance.
Transmission
[m][t][ ][Set ID][ ][Data][Cr]
Data
00: BLU Maintenance Off
01: BLU Maintenance On
** This may not be supported on some models.
Acknowledgement
[t][ ][Set ID][ ][OK/NG][Data][x]
93. Power Indicator (Command: f o)
Sets the Power Indicator Settings.
Transmission
[f ][o][ ][Set ID][ ][Data][Cr]
Data
00: Off
01: On
** This may not be supported on some models.
Acknowledgement
[o][ ][Set ID][ ][OK/NG][Data][x]
94. OSD Display (Command: k l)
Selects the desired OSD Display option.
Transmission
[k][l][ ][Set ID][ ][Data][Cr]
Data
00: No (Off)
01: Yes (On)
Acknowledgement
[l][ ][Set ID][ ][OK/NG][Data][x]
* This feature may not be supported for certain models.
95. Semi-Transparent Brightness (Command: s n, 95)
Controls semi-transparent mode LED brightness.
Transmission
[s][n][ ][Set ID][ ][9][5][ ][Data][Cr]
Data
00 to 64: LED brightness 0 to 100
Acknowledgment
[n][ ][Set ID][ ][OK/NG][9][5][Data][x]
* This feature may not be supported for some models.
ENGLISH
91. Luminance Value Read (Command: m u)
Reads luminance value.
Transmission
[m][u][ ][Set ID][ ][FF][Cr]
62
ENGLISH
96. Hybrid Mode (Command: s n, 96)
Sets display’s transparency mode.
Transmission
[s][n][ ][Set ID][ ][9][6][ ][Data][Cr]
Uses HDMI data to automatically set Picture Mode.
Transmission
[s][n][ ][Set ID][ ][9][9][ ][Data][Cr]
Data
Data
00 : Hybrid (effect: Off)
01 : Hybrid (effect: Full white)
02 : Semi-Transparent
Acknowledgment
[n][ ][Set ID][ ][OK/NG][9][6][Data][x]
99. HDMI IT Contents (Command: s n, 99)
00: Off
01: On
Acknowledgment
[n][ ][Set ID][ ][OK/NG][9][9][Data][x]
* This feature may not be supported for some models.
* This feature may not be supported for some models.
97. Return Interval (Command: s n, 97)
Controls length of time transparent mode is maintained.
Transmission
[s][n][ ][Set ID][ ][9][7][ ][Data][Cr]
Data
00 to 0a: Time maintained 0 to 10
100. UPnP Mode (Command: s n, 9c)
Sets the desired UPnP mode.
Transmission
[s][n][ ][Set ID][ ][9][c][ ][Data][Cr]
Data
Acknowledgment
[n][ ][Set ID][ ][OK/NG][9][7][Data][x]
00: Off
01: On
Acknowledgment
[n][ ][Set ID][ ][OK/NG][9][c][Data][x]
* This feature may not be supported for some models.
*This feature may not be supported on some models.
*If the UPnP Mode is changed, a reboot will occur.
98. Proximity Sensitivity (Command: s n, 98)
Sets proximity sensor sensitivity.
Transmission
[s][n][ ][Set ID][ ][9][8][ ][Data][Cr]
101. Model Name check (Command: f v)
Checks the Model Name.
Transmission
[f ][v][ ][Set ID][ ][Data][Cr]
Data
00 : High
01 : Mid
02: Low
Acknowledgment
[n][ ][Set ID][ ][OK/NG][9][8][Data][x]
* This feature may not be supported for some models.
Data
FF: Check product serial number
Acknowledgment
[v][ ][Set ID][ ][OK/NG][Data][x]
*Data is in hexadecimal ASCII code.
63
Data
00: Off
01: On
Acknowledgment
[n][ ][Set ID][ ][OK/NG][a][9][Data][x]
*This feature may not be supported on some models.
ENGLISH
102. No Signal Image (Command: s n, a9)
Turns No Signal Image On or Off.
Transmission
[s][n][ ][Set ID][ ][a][9][ ][Data][Cr]
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising