LG | OLED55B9 | User manual | LG OLED55B9 Příručka uživatele

LG OLED55B9 Příručka uživatele
OWNER’S MANUAL
Safety and Reference
Please read this manual carefully before operating
your set and retain it for future reference.
*MFL71140305*
(1908-REV01)
www.lg.com
Copyright © 2019 LG Electronics Inc.
All Rights Reserved.
ENGLISH
Warning! Safety
Instructions
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION : TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE. REFER
TO QUALIFIED SERVICE PERSONNEL.
This symbol is intended to alert the user
to the presence of uninsulated
“dangerous voltage” within the product’s
enclosure that may be of sufficient
magnitude to constitute a risk of electric
shock to persons.
This symbol is intended to alert the
user to the presence of important
operating and maintenance (servicing)
instructions in the literature accompanying
the appliance.
WARNING : TO REDUCE THE RISK OF FIRE
AND ELECTRIC SHOCK, DO NOT EXPOSE THIS
PRODUCT TO RAIN OR MOISTURE.
•• TO PREVENT THE SPREAD OF FIRE, KEEP
CANDLES OR OTHER ITEMS WITH OPEN
FLAMES AWAY FROM THIS PRODUCT AT ALL
TIMES.
2
•• Do not place the TV and/or remote
control in the following environments:
-- Keep the product away from direct
sunlight.
-- An area with high humidity such as a
bathroom
-- Near any heat source such as stoves and
other devices that produce heat.
-- Near kitchen counters or humidifiers
where they can easily be exposed to steam
or oil.
-- An area exposed to rain or wind.
-- Do not expose to dripping or splashing and
do not place objects filled with liquids,
such as vases, cups, etc. on or over the
apparatus (e.g., on shelves above the unit).
-- Near flammable objects such as gasoline
or candles, or expose the TV to direct air
conditioning.
-- Do not install in excessively dusty places.
Otherwise, this may result in fire, electric
shock, combustion/explosion, malfunction
or product deformation.
•• Disconnecting the Device from the
Main Power
-- The power plug is the disconnecting
device. In case of an emergency, the power
plug must remain readily accessible.
•• Do not let your children climb or cling onto
the TV. Otherwise, the TV may fall over,
which may cause serious injury.
•• Outdoor Antenna Grounding (Can differ
by country):
-- If an outdoor antenna is installed, follow
the precautions below. An outdoor
antenna system should not be located in
the vicinity of overhead power lines or
other electric light or power circuits, or
where it can come in contact with such
power lines or circuits as death or serious
injury can occur.
Be sure the antenna system is grounded to
provide some protection against voltage
surges and built-up static charges. Section
810 of the National Electrical Code (NEC)
in the U.S.A. provides information with
respect to proper grounding of the mast
and supporting structure, grounding of the
lead-in wire to an antenna discharge unit,
size of grounding conductors, location
of antenna discharge unit, connection to
grounding electrodes and requirements
for the grounding electrode. Antenna
grounding according to the National
Electrical Code, ANSI/NFPA 70
ENGLISH
•• Ventilation
-- Install your TV where there is proper
ventilation. Do not install in a confined
space such as a bookcase.
-- Do not install the product on a carpet or
cushion.
-- Do not block or cover the product with
cloth or other materials while unit is
plugged in.
•• Take care not to touch the ventilation
openings. When watching the TV for a
long period, the ventilation openings may
become hot.
•• Protect the power cord from physical or
mechanical abuse, such as being twisted,
kinked, pinched, closed in a door, or walked
upon. Pay particular attention to plugs, wall
outlets, and the point where the cord exits
the device.
•• Do not move the TV whilst the Power cord is
plugged in.
•• Do not use a damaged or loosely fitting
power cord.
•• Be sure do grasp the plug when unplugging
the power cord. Do not pull on the power
cord to unplug the TV.
•• Do not connect too many devices to the
same AC power outlet as this could result in
fire or electric shock.
3
ENGLISH
4
•• Grounding (Except for devices which are
not grounded.)
-- TV with a three-prong grounded AC plug
must be connected to a three-prong
grounded AC outlet. Ensure that you
connect the earth ground wire to prevent
possible electric shock.
•• Never touch this apparatus or antenna
during a lightning storm. You may be
electrocuted.
•• Make sure the power cord is connected
securely to the TV and wall socket if not
secured damage to the Plug and socket may
occur and in extreme cases a fire may break
out.
•• Do not insert metallic or inflammable
objects into the product. If a foreign object is
dropped into the product, unplug the power
cord and contact the customer service.
•• Do not touch the end of the power
cord while it is plugged in. You may be
electrocuted.
•• If any of the following occur, unplug
the product immediately and contact
your local customer service.
-- The product has been damaged.
-- If water or another substance enters the
product (like an AC adapter, power cord,
or TV).
-- If you smell smoke or other odors coming
from the TV
-- When lightning storms or when unused for
long periods of time.
Even the TV is turned off by remote control
or button, AC power source is connected to
the unit if not unplugged in.
•• Do not use high voltage electrical equipment
near the TV (e.g., a bug zapper). This may
result in product malfunction.
•• Do not attempt to modify this product in
any way without written authorization from
LG Electronics. Accidental fire or electric
shock can occur. Contact your local customer
service for service or repair. Unauthorized
modification could void the user’s authority
to operate this product.
•• Moving
-- When moving, make sure the product
is turned off, unplugged, and all cables
have been removed. It may take 2 or more
people to carry larger TVs. Do not press
or put stress on the front panel of the
TV. Otherwise, this may result in product
damage, fire hazard or injury.
•• Keep the packing anti-moisture material or
vinyl packing out of the reach of children.
•• Do not allow an impact shock, any objects
to fall into the product, and do not drop
anything onto the screen.
•• Do not press strongly upon the panel with
a hand or a sharp object such as a nail,
pencil, or pen, or make a scratch on it. It may
cause damage to screen.
•• Cleaning
-- When cleaning, unplug the power cord
and wipe gently with a soft/dry cloth. Do
not spray water or other liquids directly
on the TV. Do not clean your TV with
chemicals including glass cleaner, any type
of air freshener, insecticide, lubricants,
wax (car, industrial), abrasive, thinner,
benzene, alcohol etc., which can damage
the product and/or its panel. Otherwise,
this may result in electric shock or product
damage.
ENGLISH
•• Use only an authorized attachments /
accessories approved by LG Electronics.
Otherwise, this may result in fire, electric
shock, malfunction, or product damage.
•• Never disassemble the AC adapter or power
cord. This may result in fire or electric shock.
•• Handle the adapter carefully to avoid
dropping or striking it. An impact could
damage the adapter.
•• To reduce the risk of fire or electrical shock,
do not touch the TV with wet hands. If the
power cord prongs are wet or covered with
dust, dry the power plug completely or wipe
dust off.
•• Batteries
-- Store the accessories (battery, etc.) in a
safe location out of the reach of children.
-- Do not short circuit, disassemble, or allow
the batteries to overheat. Do not dispose of
batteries in a fire. Batteries should not be
exposed to excessive heat.
5
Preparing
ENGLISH
•• If the TV is turned on for the first time after it
was shipped from the factory, initialization
of the TV may take a few minutes.
•• Image shown may differ from your TV.
•• Your TV’s OSD (On Screen Display) may differ
slightly from that shown in this manual.
•• The available menus and options may differ
from the input source or product model that
you are using.
•• New features may be added to this TV in the
future.
•• The device must be easily accessed to a
location outlet near the access. Some devices
are not made by turning on / off button,
turning off the device and unplugging the
power cord.
•• The items supplied with your product may
vary depending on the model.
•• Product specifications or contents of this
manual may be changed without prior
notice due to upgrade of product functions.
•• For an optimal connection, HDMI cables
and USB devices should have bezels less
than 10 mm thick and 18 mm width. Use an
extension cable that supports
if the
USB cable or USB memory stick does not fit
into your TV’s USB port.
B
B
A
6
A
* A ≦ 10 mm
* B ≦ 18 mm
•• Use a certified cable with the HDMI logo
attached.
•• If you do not use a certified HDMI cable,
the screen may not display or a connection
error may occur. (Recommended HDMI Cable
Types)
-- Ultra High-Speed HDMI®/TM cable (3 m or
less)
Separate Purchase
Separate purchase items can be changed or
modified for quality improvement without any
notification. Contact your dealer to buy these
items. These devices only work with certain
models.
The model name or design may be changed
depending on the upgrade of product functions,
manufacturer’s circumstances or policies.
Magic Remote Control
AN-MR19BA
Check whether your TV model supports
Bluetooth in the Wireless Module Specification
to verify whether it can be used with the Magic
Remote.
Wall Mounting Bracket
A
B
Model
VESA (A x B)
(mm)
Standard
screw
Number of
screws
Wall mount
bracket
OLED55/65B9*
OLED77B9*
OLED55/65C9*
OLED77C9*
OLED55/65E9*
300 x 200
400 x 200
M6
M6
4
4
OLW480B
OLW480B
Please note the following advice to prevent the
TV from being scratched or damaged and for
safe transportation regardless of its type and
size.
ENGLISH
(Depending on model)
Make sure to use screws and wall mount
bracket that meet the VESA standard. Standard
dimensions for the wall mount kits are
described in the following table.
Lifting and moving
the TV
•• It is recommended to move the TV in the box
or packing material that the TV originally
came in.
•• Before moving or lifting the TV, disconnect
the power cord and all cables.
•• When holding the TV, the screen should face
away from you to avoid damage.
•• Hold the side and bottom of the TV frame
firmly. Make sure not to hold the transparent
part, speaker, or speaker grill area. (Not
applicable for OLED55/65E9*)
7
ENGLISH
•• When transporting a large TV, there should
be at least 2 people.
•• When transporting the TV by hand, hold the
TV as shown in the following illustration.
• Avoid touching the screen at all
times, as this may result in damage to
the screen.
• When attaching the stand to the TV
set, place the screen facing down on
a cushioned table or flat surface to
protect the screen from scratches.
• Do not scratch or hit the glass with
metal materials or objects. It may
damage the TV or lead to an accident.
(Only OLED55/65E9*)
(Only OLED55/65E9*)
•• Hold the side of the TV with one hand, and
hold the bottom of the rear cover or the
side of the Stand with the other. (Hold the
rear cover when placing the TV on the floor. Mounting on the
Holding the bottom glass may result in
Table
injury.) (Only OLED55/65E9*)
•• When transporting the TV, do not expose the 1 Lift and tilt the TV into its upright position
on a table. TV to jolts or excessive vibration.
•• Leave a 10 cm (minimum) space from the
•• When transporting the TV, keep the TV
wall for proper ventilation.
upright, never turn the TV on its side or tilt
towards the left or right.
•• Do not apply excessive pressure to cause
10 cm
flexing / bending of frame chassis as it may
10
10 cm
cm
damage screen.
10 cm
•• When handling the TV, be careful not to
10
cm
damage the protruding buttons.
(Depending on model)
2 Connect the power cord to a wall outlet.
8
Securing TV to the Wall
ENGLISH
• Do not apply foreign substances (oils,
lubricants, etc.) to the screw parts
when assembling the product. (Doing
so may damage the product.)
• If you install the TV on a stand, you
need to take actions to prevent the
product from overturning. Otherwise,
the product may fall over, which may
cause injury.
• Do not use any unapproved items
to ensure the safety and product life
span.
• Any damage or injuries caused by
using unapproved items are not
covered by the warranty.
• Make sure that the screws are
inserted correctly and fastened
securely. (If they are not fastened
securely enough, the TV may tilt
forward after being installed.) Do not
use too much force and over tighten
the screws; otherwise screw may be
damaged and not tighten correctly.
(Depending on model)
1 Insert and tighten the eye-bolts, or TV
brackets and bolts on the back of the TV.
•• If there are bolts inserted at the eye-bolts
position, remove the bolts first.
2 Mount the wall brackets with the bolts to
the wall. Match the location of the wall
bracket and the eye-bolts on the rear of the
TV.
3 Connect the eye-bolts and wall brackets
tightly with a sturdy rope. Make sure to keep
the rope horizontal with the flat surface.
•• Use a platform or cabinet that is strong and
large enough to support the TV securely.
•• Brackets, bolts and ropes are not provided.
You can obtain additional accessories from
your local dealer.
9
Mounting to the Wall
ENGLISH
Attach an optional wall mount bracket at the
rear of the TV carefully and install the wall
mount bracket on a solid wall perpendicular
to the floor. When you attach the TV to other
building materials, please contact qualified
personnel. LG recommends that wall mounting
be performed by a qualified professional
installer. We recommend the use of LG’s wall
mount bracket. LG’s wall mount bracket is
easy to move with cables connected. When
you do not use LG’s wall mount bracket, please
use a wall mount bracket where the device is
adequately secured to the wall with enough
space to allow connectivity to external devices.
It is advised to connect all the cables before
installing fixed wall mounts.
10 cm
10 cm
10 cm
10 cm
10 cm
(Depending on model)
10
• Remove the stand before installing
the TV on a wall mount by performing
the stand attachment in reverse.
• For more information of screws
and wall mount bracket, refer to the
Separate purchase.
• If you intend to mount the product
to a wall, attach VESA standard
mounting interface (optional parts)
to the back of the product. When
you install the set to use the wall
mounting bracket (optional parts), fix
it carefully so as not to drop.
• When mounting a TV on the wall,
make sure not to install the TV by
hanging the power and signal cables
on the back of the TV.
• Do not install this product on a wall
if it could be exposed to oil or oil mist.
This may damage the product and
cause it to fall.
Connections
Connect various external devices to the TV and
switch input modes to select an external device.
For more information of external device’s
connection, refer to the manual provided with
each device.
ENGLISH
•• Please use the accessory cable
holder when hanging on the wall.
(Only OLED55/65C9*)
Antenna/Cable
Connect the TV to a wall antenna socket with an
RF cable (75 Ω).
•• Attach the three covers when
installing the wall mount. (Only
when the item is provided.) (Only
OLED55/65E9*)
•• Use a signal splitter to use more than 2 TVs.
•• If the image quality is poor, install a signal
amplifier properly to improve the image
quality.
•• If the image quality is poor with an antenna
connected, try to realign the antenna in the
correct direction.
•• An antenna cable and converter are not
supplied.
•• For a location that is not supported with
ULTRA HD broadcasting, this TV cannot
receive ULTRA HD broadcasts directly.
11
ENGLISH
Satellite dish
HDMI
Connect the TV to a satellite dish to a satellite
socket with a satellite RF cable (75 Ω).
(Depending on model)
•• When connecting the HDMI cable, the
product and external devices should be
turned off and unplugged.
•• Supported HDMI Audio format :
DTS (44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz),
DTS HD (44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz,
176.4 kHz, 192 kHz),
True HD (48 kHz),
Dolby Digital / Dolby Digital Plus (32 kHz,
44.1 kHz, 48 kHz),
PCM (32 kHz, 44.1 kHz, 48 kHz, 96 kHz, 192
kHz)
(Depending on model)
CI module
View the encrypted (pay) services in digital TV
mode. (Depending on model)
•• Check if the CI module is inserted into the
PCMCIA card slot in the right direction. If
the module is not inserted properly, this can
cause damage to the TV and the PCMCIA
card slot.
•• If the TV does not display any video and
audio when CI+ CAM is connected, please
contact to the Terrestrial/Cable/Satellite
Service Operator.
Other connections
Connect your TV to external devices. For the
best picture and audio quality, connect the
external device and the TV with the HDMI cable.
Some separate cable is not provided.
12
••
→ ( ) → [Picture] → [Additional
Settings] → [HDMI ULTRA HD Deep Colour]
-- On : Support 4K @ 50/60 Hz (4:4:4, 4:2:2,
4:2:0)
-- Off : Support 4K @ 50/60 Hz 8 bit (4:2:0)
If the device connected to Input Port also
supports ULTRA HD Deep Colour, your picture
may be clearer. However, if the device
doesn’t support it, it may not work properly.
In that case, change the TV’s [HDMI ULTRA
HD Deep Colour] setting to off.
USB
External Devices
Available external devices are: Blu-ray player,
HD receivers, DVD players, VCRs, audio systems,
USB storage devices, PC, gaming devices, and
other external devices.
•• The external device connection may differ
from the model.
•• Connect external devices to the TV regardless
of the order of the TV port.
•• If you record a TV program on a Blu-ray/DVD
recorder or VCR, make sure to connect the TV
signal input cable to the TV through a DVD
recorder or VCR. For more information of
recording, refer to the manual provided with
the connected device.
•• Refer to the external equipment’s manual
for operating instructions.
ENGLISH
Some USB Hubs may not work. If a USB device
connected using a USB Hub is not detected,
connect it to the USB port on the TV directly.
•• If you connect a gaming device to the TV, use
the cable supplied with the gaming device.
•• In PC mode, there may be noise associated
with the resolution, vertical pattern, contrast
or brightness. If noise is present, change the
PC output to another resolution, change the
refresh rate to another rate or adjust the
brightness and contrast on the [PICTURE]
menu until the picture is clear.
•• In PC mode, some resolution settings
may not work properly depending on the
graphics card.
•• If ULTRA HD content is played on your PC,
video or audio may become disrupted
intermittently depending on your PC’s
performance. (Depending on model)
•• When connecting via a wired LAN, it is
recommended to use a CAT 7 cable. (Only
when
port is provided.)
13
Using Button
ENGLISH
You can simply operate the TV functions, using
the button.
<A type>
<B type>
Basic functions
<A type>
Power On (Press)
Power Off 1 (Press and Hold)
Menu Control (Press 2)
Menu Selection (Press and Hold 3)
1 All running apps will close, and any
recording in progress will stop. (Depending
on country)
2 You can access and adjust the menu by
pressing the button when TV is on.
3 You can use the function when you access
menu control.
<B type>
Power On (Press)
Power Off 1 (Press and hold)
Volume Control
Programmes Control
1 All running apps will close, and any
recording in progress will stop. (Depending
on country)
14
Adjusting the menu
<A type>
ENGLISH
When the TV is turned on, press the button
one time. You can adjust the Menu items using
the button.
Turns the power off.
Changes the input source.
Adjusts the volume level.
Scrolls through the saved programmes.
<B type>
Turns the power off.
Accesses the settings menu.
Clears on-screen displays and returns to
TV viewing.
Changes the input source.
15
ENGLISH
Using Magic Remote
Control
The descriptions in this manual are based on
the buttons on the remote control. Please read
this manual carefully and use the TV correctly.
When the message [Magic Remote battery is
low. Please change the battery.] is displayed,
replace the battery.
To replace batteries, open the battery cover,
replace batteries (1.5 V AA) matching the
and ends to the label inside the
compartment, and close the battery cover. Be
sure to point the magic remote toward the
remote control sensor on the TV. To remove the
batteries, perform the installation actions in
reverse.
1
1
1
1
1
(Some buttons and services may not be
provided depending on models or regions.)
16
To use the button, press and hold for
more than 1 second.
ENGLISH
(POWER) Turns the TV on or off.
/
You can turn your set-top box on or
off by adding the set-top box to the universal
remote control for your TV.
Number buttons Enters numbers.
Accesses the [QUICK HELP].
(DASH) Inserts a between numbers such
as 2-1 and 2-2.
/
Accesses the saved programmes
list.
(More Actions) Displays more remote
control functions.
Edits QUICK ACCESS.
--QUICK ACCESS is a feature that allows you to
enter a specified app or Live TV directly by
pressing and holding the number buttons.
Audio descriptions function will be
enabled.
Adjusts the volume level.
(MUTE) Mutes all sounds.
(MUTE) Accesses the [Accessibility] menu.
Scrolls through the saved
programmes.
(Voice recognition) Network connection
is required to use the voice recognition
function. Once the voice display bar is
activated on the TV screen, press and hold the
button and speak your command out loud.
(HOME) Accesses the Home menu.
(HOME) Shows the previous history.
(Q. Settings) Accesses the Quick Settings.
(Q. Settings) Displays the [All Settings]
menu.
Wheel (OK) Press the center of button
to select a menu. You can change programmes
by using button.
(up/down/left/right) Press
the up, down, left or right button to scroll
the menu. If you press
buttons
while the pointer is in use, the pointer will
disappear from the screen and Magic Remote
will operate like a general remote control. To
display the pointer on the screen again, shake
Magic Remote to the left and right.
/
Returns to the previous level.
/
Clears on-screen displays and
returns to last input viewing.
/
Shows programme guide.
Streaming
Service buttons Connects to
1
the Video Streaming Service.
(INPUT) Changes the input source.
(INPUT) Accesses the [HOME
DASHBOARD].
Displays the set-top box Home menu.
--When you are not watching via a set-top
box: the display changes to the set-top box
screen.
,
,
,
These access special
functions in some menus.
Runs the record function.
, (Control buttons) Controls media
contents.
17
Registering Magic Remote
Control
ENGLISH
How to register the Magic
Remote Control
To use the Magic Remote, first pair it with your
TV.
1 Put batteries into the Magic Remote and
turn the TV on.
2 Point the Magic Remote at your TV and press
the Wheel (OK) on the remote control.
* If the TV fails to register the Magic Remote,
try again after turning the TV off and back
on.
How to deregister the Magic
Remote Control
Press the
/
and (HOME) buttons
at the same time, for five seconds, to unpair the
Magic Remote with your TV.
* Pressing and holding the
/
button will let you cancel and re-register
Magic Remote at once.
• It is recommended that an Access
Point (AP) be located more than 0.2 m
away from the TV. If the AP is installed
closer than 0.2 m, the Magic remote
control may not perform as expected
due to frequency interference.
• Do not mix new batteries with old
batteries. This may cause the batteries
to overheat and leak.
• Failure to match the correct polarities
of the battery may cause the battery
to burst or leak, resulting in fire,
personal injury, or ambient pollution.
• This apparatus uses batteries. In
your community there might be
regulations that require you to
dispose of these batteries properly
due to environmental considerations.
Please contact your local authorities
for disposal or recycling information.
• Batteries inside or inside the product
shall not be exposed to excessive heat
such as sunshine, fire or the like.
User Guide
For more information about this TV, read the
USER GUIDE embedded in the product.
•• To open the USER GUIDE → ( )
→ [General] → [About This TV] → [User
Guide]
18
Troubleshooting
•• Check the remote control sensor on the
product and try again.
•• Check if there is any obstacle between the
product and the remote control.
•• Check if the batteries are still working and
properly installed ( to , to ).
No image display and no sound is produced.
•• Check if the product is turned on.
•• Check if the power cord is connected to a
wall outlet.
•• Check if there is a problem in the wall outlet
by connecting other products.
The TV turns off suddenly.
•• Check the power control settings. The power
supply may be interrupted.
•• Check if the auto-off function is activated on
the settings related time.
•• If there is no signal while the TV is on, the TV
will turn off automatically after 15 minutes
of inactivity.
When connecting to the PC (HDMI), no signal is
detected.
•• If the product feels cold to the touch, there
may be a small “flicker” when it is turned on.
This is normal, there is nothing wrong with
product.
•• This panel is an advanced product that
contains millions of pixels. You may see
tiny black dots and/or brightly coloured
dots (white, red, blue or green) at a size of
1 ppm on the panel. This does not indicate
a malfunction and does not affect the
performance and reliability of the product.
This phenomenon also occurs in third-party
products and is not subject to exchange or
refund.
•• You may find different brightness and colour
of the panel depending on your viewing
position(left/right/top/down).
This phenomenon occurs due to the
characteristic of the panel. It is not related
with the product performance, and it is not
malfunction.
ENGLISH
Cannot control the TV with the remote control.
Abnormal Display
•• Turn the TV off/on using the remote control.
•• Reconnect the HDMI cable.
•• Restart the PC with the TV on.
19
Generated Sound
ENGLISH
•• “Cracking” noise: A cracking noise that
occurs when watching or turning off the TV
is generated by plastic thermal contraction
due to temperature and humidity. This noise
is common for products where thermal
deformation is required.
•• Electrical circuit humming/panel buzzing: A
low level noise is generated from a highspeed switching circuit, which supplies
a large amount of current to operate a
product. It varies depending on the product.
This generated sound does not affect the
performance and reliability of the product.
• Make sure to wring any excess water
or cleaner from the cloth.
• Do not spray water or cleaner directly
onto the TV screen.
• Make sure to spray just enough of
water or cleaner onto a dry cloth to
wipe the screen.
20
Specifications
Broadcasting Specifications
Digital TV
Television
system
DVB-T/T2, DVB-C, DVB-S/S2
DVB-S/S2*
Channel
coverage
(Band)
Maximum
number of
storable
programmes
External
antenna
impedance
CI Module
(W x H x D)
950 ~ 2,150
MHz
Analogue TV
PAL B/B, PAL
B/G, PAL D/K,
PAL-I,
SECAM B/G,
SECAM D/K,
NTSC-M
ENGLISH
(Depending on country)
DVB-C*
DVB-T/T2*
VHF III : 174 ~ 230 MHz
UHF IV : 470 ~ 606 MHz
46 ~ 862 MHz
46 ~ 890 MHz UHF V : 606 ~ 862 MHz
S Band II : 230 ~ 300 MHz
S Band III : 300 ~ 470 MHz
6,000
3,000
75 Ω
100.0 mm x 55.0 mm x 5.0 mm
* Only DVB-T2/C/S2 support model only.
21
ENGLISH
Wireless module (LGSBWAC92) Specifications
Wireless LAN (IEEE 802.11a/b/g/n/ac)
Frequency Range
Output Power (Max.)
2,400 to 2,483.5 MHz
18 dBm
5,150 to 5,725 MHz
18 dBm
5,725 to 5,850 MHz (Not for EU)
12 dBm
Bluetooth
Frequency Range
Output Power (Max.)
2,400 to 2,483.5 MHz
8 dBm
As band channels can vary per country, the user cannot change or adjust the operating
frequency. This product is configured for the regional frequency table.
For consideration of the user, this device should be installed and operated with a minimum
distance of 20 cm between the device and the body.
* IEEE 802.11ac is not available in all countries.
Environment condition
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
22
0 °C to 40 °C
Less than 80 %
-20 °C to 60 °C
Less than 85 %
To obtain the source code under GPL, LGPL,
MPL, and other open source licenses, that is
contained in this product, please visit
http://opensource.lge.com.
In addition to the source code, all referred
license terms, warranty disclaimers and
copyright notices are available for download.
LG Electronics will also provide open source
code to you on CD-ROM for a charge covering
the cost of performing such distribution (such
as the cost of media, shipping, and handling)
upon email request to opensource@lge.com.
This offer is valid for a period of three years after
our last shipment of this product. This offer is
valid to anyone in receipt of this information.
Licenses
ENGLISH
Open Source
Software Notice
Information
(Magic Remote supported models only)
23
ENGLISH
Important
Information for
Preventing Image
Retention
OLED is a self-emissive technology, which
brings many significant benefits to image
quality and performance. As with any selfemitting display, it is possible for users of OLED
TVs to experience temporary image retention
under certain conditions, such as when
displaying a static image on the screen for a
long time. LG OLED TVs incorporate dedicated
functions that protect the screen from possible
image retention.
If a static image persists on screen, screen
brightness is automatically reduced in specific
areas of, or across the entire screen. Once the
static image disappears, screen brightness will
automatically return to its prior setting. This is
not a product malfunction.
24
Examples of Images
that may Cause Image
Retention
•• Still images or fixed images containing
certain information that are displayed
uninterrupted on the screen, such as channel
numbers, station logos, program titles, news
or movie subtitles, and headlines.
•• Fixed menu or icons for video game consoles
or broadcasting set-top boxes.
•• Black bars shown on the left, right, top, or
bottom of the screen, such as in images with
a 4:3 or 21:9 ratio.
•• Avoid watching a video displaying an image
as listed above for extended periods of time.
•• Adjust your TV settings as below when
turning on a video exhibiting an image as
listed above for extended periods of time.
-- [Picture] → [Picture Mode Settings] →
[Picture Mode] → [Eco]
-- [Picture] → [Picture Mode Settings] →
[OLED LIGHT] → Adjust to lower value
-- [Picture] → [Additional Settings] →
[OLED Panel Settings] → [Logo Luminance
Adjustment] → [High]
•• Turn off the menu bar of an external device,
such as a set-top box, to prevent long-term
display of the menu bar of such device.
(Please refer to the manual of the applicable
external device for instructions.)
•• Adjust the settings as below when watching
a video constantly showing black bars on the
left, right, top or bottom, in order to remove
the black bars.
-- [Picture] → [Aspect Ratio Settings] →
[Aspect Ratio] → [Vertical Zoom] or [AllDirection Zoom]
Information on Functions
Supporting Image Quality
in Relation to Temporary
Image Retention
•• LG OLED TVs provide a feature called Pixel
Refresher, which helps to prevent temporary
image retention.
•• When the accumulated television viewing
time reaches 2,000 hours or more (this is
equivalent to watching TV for five hours
a day over the course of a year), Pixel
Refresher will be automatically activated
once your TV is turned off. When turning off
your TV, a notice will appear on the screen
informing the activation of Pixel Refresher.
This feature will run for an hour while
your TV is turned off. A horizontal line may
appear at the top or bottom of the screen
when the process is almost finished.
•• You may also manually activate Pixel
Refresher via the TV menu:
→ ( ) → [Picture] → [Additional
Settings] → [OLED Panel Settings] → [Pixel
Refresher].
•• Whenever you watch your TV for more than
four cumulative hours, Pixel Refresher will
be automatically activated for a few minutes
once your TV is turned off. (Note: Pixel
Refresher will not be activated if the power
cord of your TV is not plugged in or the main
power is off.)
ENGLISH
Recommended Measures
for Preventing Image
Retention
25
SMART TV Quick Setup Guide
* Image shown may differ from your TV.
* Image shown on a PC or mobile phone may vary depending on the OS(Operating System).
* App icon positions may vary on the platform, depending on the software version.
Network Settings
1 Press the (Settings) on the remote to
access the settings menu. Point the
( ) [All
Settings] icon and select by pressing the
Wheel (OK) button on the remote.
4 If the connection is successful, the "[Connected
to Internet]" is displayed.
Picture
CONNECTION
Sound
TV Name
Programmes
Wired Connection (Ethernet)
Not Connected
Connection
Wi-Fi Connection
Connected to Internet
General
Device Connector
Mobile TV on
( )
Safety
All Settings
Accessibility
2 Select the [Connection] → [Wired
Connection(Ethernet)] or [Wi-Fi Connection].
Picture
Sound
Programmes
Picture
TV Name
Sound
Wired Connection (Ethernet)
Programmes
Wi-Fi Connection
Connection
Device Connector
Mobile TV on
Safety
WI-FI CONNECTION
Connection /
Not Connected
General
HDMI Device Settings
You can check the status of connection in [Advanced Wi-Fi settings].
CONNECTION
Not Connected
Connection
Screen Share Settings
General
Add a Hidden Wireless Network
Connect via WPS PBC
Screen Share Settings
Safety
HDMI Device Settings
Connect via WPS PIN
Advanced Wi-Fi Settings
Accessibility
Accessibility
3 The device automatically tries to connect to the
network available (wired network first).
When you select the [Wi-Fi Connection], the
network list available is displayed. Choose the
network you wish to use.
Picture
WI-FI CONNECTION
Connection /
Sound
Programmes
Connection
General
Add a Hidden Wireless Network
Connect via WPS PBC
Safety
Connect via WPS PIN
Advanced Wi-Fi Settings
Accessibility
For wireless AP (Router) that have the
you need to enter the security key.
symbol,
www.lg.com
Troubleshooting Network Problems
1 Press the (Settings) on the remote to
access the settings menu. Point the
( ) [All
Settings] icon and select by pressing the
Wheel (OK) button on the remote.
Check the AP (Router) or consult your Internet
service provider.
When X appears next to Gateway:
( )
1 Unplug the power cord of the AP (Router) and
try to connect after 5 seconds.
All Settings
2 Initialize (Reset) the AP (Router).
2 Select the [Connection] → [Wired Connection
(Ethernet)] or [Wi-Fi Connection] → [Advanced
Wi-Fi Settings].
Picture
CONNECTION
Picture
3 Contact internet service provider or AP (Router)
company.
WI-FI CONNECTION
Connection /
Sound
Sound
TV Name
Programmes
Programmes
Wired Connection (Ethernet)
Not Connected
Connection
Wi-Fi Connection

When X appears next to DNS:
Connection
Not Connected
General
Device Connector
General
Mobile TV on
Safety
Connect via WPS PBC
Safety
Screen Share Settings
Connect via WPS PIN
Advanced Wi-Fi Settings
HDMI Device Settings
Accessibility
Add a Hidden Wireless Network
Accessibility
Follow the instructions below that correlate to your
network status.
Check the TV or the AP (Router).
1 Unplug the power cord of the AP (Router) and
try to connect after 5 seconds.
2 Initialize (Reset) the AP (Router).
3 Check that the MAC address of the TV/AP (Router)
is registered with your Internet service provider.
(The MAC address displayed on the right
pane of the network status window should be
registered with your Internet service provider.)
4 Check the AP (Router) manufacturer’s website
to make sure your router has the latest firmware
version installed.
When X appears next to TV:
1 Check the connection status of the TV, AP
(Router).
2 Power off and power on the TV, AP (Router).
3 If you are using a static IP, enter the IP directly.
4 Contact internet service provider or AP (Router)
company.
SmartShare Connection to Smartphone
1 Check that Wi-Fi is enabled on your smartphone. To use SmartShare, both devices must on the
same local network.
2 Install/run the app for sharing content on your smartphone (It's called LG TV Plus on LG phones).
3 Enable your smartphone to share content files with other devices.
4 Select the file type you want to play (movie, audio or photo).
5 Select a movie, music or photo file to play on the TV.
6 Play the media file to view and enjoy it on your TV.
Updating the TV Firmware
* If the TV is turned on for the first time after it was shipped from the factory, initialization of the TV may
take a few minutes.
1
(Settings) →
(
)[All Settings] →
[General] → [About This TV] → [CHECK FOR UPDATES]
2 After checking the version of the software, update it.
If you check the "[Allow Automatic Updates]", you can update the software automatically.
Picture
Sound
Programmes
GENERAL
AI Service
General
Safety
Accessibility
General /
Software Version
Location
Timers
Account Management
Eco Mode
About This TV
Additional Settings
ABOUT THIS TV
Sound
Language
Time & Date
Connection
Picture
Programmes

Connection
General
Allow Automatic Updates
CHECK FOR UPDATES
TV Information
Notifications
Safety
Accessibility
User Guide
Quick Help
Please call LG Customer Service if you experience any problems.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising