OWNER’S MANUAL Safety and Reference LED TV* *LG LED TV applies LCD screen with LED backlights. Please read this manual carefully before operating your TV and retain it for future reference. 28TK420S 24TL520S 28TL520S 24TL510S 28TL510S www.lg.com Copyright © 2019 LG Electronics Inc. All Rights Reserved. Table of contents Licenses--------------------------------------------3 ENG ENGLISH Open source software notice information---------------------------------------3 Preparing------------------------------------------3 Lifting and moving the TV--------------------4 Setting up the TV--------------------------------4 Using the button--------------------------------5 Mounting on a table----------------------------6 Mounting on a wall-----------------------------7 Connections (notifications)------------------8 Remote control----------------------------------9 Maintenance------------------------------------ 11 Troubleshooting------------------------------ 11 Specifications---------------------------------- 12 2 Licenses Supported licenses may differ by model. For more information about licenses, visit www.lg.com. To obtain the source code under GPL, LGPL, MPL, and other open source licenses, that is contained in this product, please visit http://opensource.lge.com. In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download. LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping, and handling) upon email request to firstname.lastname@example.org. This offer is valid for a period of three years after our last shipment of this product. This offer is valid to anyone in receipt of this information. NOTE yy Image shown may differ from your TV. yy Your TV’s OSD (On Screen Display) may differ slightly from that shown in this manual. yy The available menus and options may differ from the input source or product model that you are using. yy New features may be added to this TV in the future. yy The TV can be placed in standby mode in order to reduce the power consumption. And the TV should be turned off if it will not be watched for some time, as this will reduce energy consumption. yy The energy consumed during use can be significantly reduced if the level of brightness of the picture is reduced, and this will reduce the overall running cost. yy The items supplied with your product may vary depending on the model. yy Product specifications or contents of this manual may be changed without prior notice due to upgrade of product functions. yy For an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm thick and 18 mm width. Use an extension cable that supports USB 2.0 if the USB cable or USB memory stick does not fit into your TV’s USB port. B B A A ENGLISH ENG Open source software notice information Preparing *A < = 10 mm *B < = 18 mm yy Use a certified cable with the HDMI logo attached. If you do not use a certified HDMI cable, the screen may not display or a connection error may occur. yy Recommended HDMI cable types -- High-Speed HDMI®/™ cable -- High-Speed HDMI®/™ cable with Ethernet CAUTION yy Do not use any unapproved items to ensure the safety and product life span. yy Any damage or injuries caused by using unapproved items are not covered by the warranty. 3 Lifting and moving the TV ENG ENGLISH Please note the following advice to prevent the TV from being scratched or damaged and for safe transportation regardless of its type and size. yy It is recommended to move the TV in the box or packing material that the TV originally came in. yy Before moving or lifting the TV, disconnect the power cord and all cables. yy When holding the TV, the screen should face away from you to avoid damage. yy Hold the top and bottom of the TV frame firmly. Make sure not to hold the transparent part, speaker, or speaker grill area. CAUTION yy Avoid touching the screen at all times, as this may result in damage to the screen. yy When handling the TV, be careful not to damage the protruding joystick button. (Depending on model) Setting up the TV CAUTION yy When transporting the TV, do not expose the TV to jolts or excessive vibration. yy When transporting the TV, keep the TV upright, never turn the TV on its side or tilt towards the left or right. yy Do not apply excessive pressure to cause flexing/bending of frame chassis as it may damage screen. 4 yy When attaching the stand to the TV set, place the screen facing down on a cushioned table or flat surface to protect the screen from scratches. yy Do not carry the TV upside-down by holding the stand body (or stand base) as this may cause it to fall off, resulting in damage or injury. yy Do not apply foreign substances (oils, lubricants, etc.) to the screw parts when assembling the product. (Doing so may damage the product.) NOTE yy Remove the stand before installing the TV on a wall mount by performing the stand attachment in reverse. (Only TK420S/TL520S) yy Lift up the latch at the bottom of the stand base and detach the stand base from the TV. (Only TL510S) Using the button <TL520S/TL510S> yy Image shown may differ from your TV. <TK420S> 1 2 3 ENGLISH ENG Power On (Press) Power Off1 (Press and hold) Menu Control (Press2) Menu Selection (Press and Hold3) You can simply operate the TV functions, using the button. (Depending on model) All running apps will close, and any recording in progress will stop. You can access and adjust the menu by pressing the button when TV is on. You can use the function when you access menu control. Adjusting the menu When the TV is turned on, press the button one time. You can adjust the menu items using the buttons. (Depending on model) <TL520S/TL510S> Turns the power off. Accesses the setting menu. Clears on-screen displays and returns to TV viewing. Changes the input source. Scrolls through the saved programmes. Adjusts the volume level. Basic functions <TK420S> Power On (Press) Power Off (Press and hold1) Volume Control Programmes Control 1 If the menu button is on the screen, pressing and holding the button will let you exit the menu. NOTE yy If you press the joystick button first, you may not be able to adjust the volume level and saved programmes. CAUTION yy With your finger on the joystick button, when moving it up, down, left or right be careful not to press the button in. 5 Mounting on a table (This is not available for all models.) yy Image shown may differ from your TV. ENG ENGLISH 1 Using the kensington security system Lift and tilt the TV into its upright position on a table. -- Leave a 100 mm (minimum) space from the wall for proper ventilation. yy Image shown may differ from your TV. The Kensington security system connector is located at the rear of the TV. For more information of installation and using, refer to the manual provided with the Kensington security system or visit http://www.kensington.com. Connect the Kensington security system cable between the TV and a table. 100 mm 100 mm 100 mm 100 mm NOTE 2 Connect the AC-DC Adapter and power cord to a wall outlet. CAUTION yy Do not place the TV near or on sources of heat, as this may result in fire or other damage. yy Please be sure to connect the TV to the AC/DC power adapter before connecting the TV’s power plug to a wall power outlet. 6 yy The Kensington security system is optional. You can obtain additional accessories from most electronics stores. Mounting on a wall CAUTION 100 mm 100 mm 100 mm 100 mm 100 mm If you intend to mount the TV to a wall, attach Wall mounting interface (optional parts) to the back of the TV. When you install the TV using the wall mounting interface (optional parts), attach it carefully so it will not drop. 1 If you use screw longer than standard, the TV might be damaged internally. If you use improper screw, the product might be damaged and drop from mounted position. In this case, LG Electronics is not responsible for it. 2 yy Must use the enclosed screw in the box. (Depending on model) yy Disconnect the power first, and then move or install the TV. Otherwise electric shock may occur. yy If you install the TV on a ceiling or slanted wall, it may fall and result in severe injury. yy Use an authorized LG wall mount and contact the local dealer or qualified personnel. yy Do not over tighten the screws as this may cause damage to the TV and void your warranty. yy Use the screws and wall mounts that meet the VESA standard. Any damages or injuries by misuse or using an improper accessory are not covered by the warranty. yy Screw length from outer surface of back cover should be under 8 mm. Wall mount Pad Back Cover Wall mount Pad Back Cover Standard screw : M4 x L10 Separate purchase (Wall mounting bracket) Model 24TL520S 24TL510S 28TK420S 28TL520S 28TL510S 75 x 75 100 x 100 Wall mount (A x B) (mm) A B Standard screw Number of screws Wall mount bracket (optional) M4 x L10 4 RW120 ENGLISH ENG For proper ventilation, allow a clearance of 100 mm on each side and from the wall. Detailed installation instructions are available from your dealer, see the optional Tilt Wall Mounting Bracket Installation and Setup Guide. Max.8 mm NOTE yy Use the screws that are listed on the VESA standard screw specifications. yy The wall mount kit includes an installation manual and necessary parts. yy The wall mount bracket is optional. You can obtain additional accessories from your local dealer. yy The length of screws may differ depending on the wall mount. Be sure to use the proper length. yy For more information, refer to the instructions supplied with the wall mount. 7 Connections (notifications) ENG ENGLISH Connect various external devices to the TV and switch input modes to select an external device. For more information about an external device’s connection, refer to the manual supplied with each device. Available external devices are: HD receivers, DVD players, VCRs, audio systems, USB storage devices, PC, gaming devices, and other external devices. NOTE yy The external device connection may differ from the model. yy Connect external devices to the TV regardless of the order of the TV port. yy If you record a TV programme on a DVD recorder or VCR, make sure to connect the TV signal input cable to the TV through a DVD recorder or VCR. For more information of recording, refer to the manual provided with the connected device. yy Refer to the external equipment’s manual for operating instructions. yy If you connect a gaming device to the TV, use the cable supplied with the gaming device. yy In PC mode, there may be noise associated with the resolution, vertical pattern, contrast or brightness. If noise is present, change the PC output to another resolution, change the refresh rate to another rate or adjust the brightness and contrast on the [Picture] menu until the picture is clear. yy In PC mode, some resolution settings may not work properly depending on the graphics card. Antenna connection Connect the TV to a wall antenna socket with an RF cable (75 Ω) (Not Provided). yy Use a signal splitter to use more than 2 TVs. yy If the image quality is poor, install a signal amplifier properly to improve the image quality. yy If the image quality is poor with an antenna connected, try to realign the antenna in the correct direction. yy An antenna cable and converter are not supplied. yy Supported DTV Audio : MPEG, Dolby Digital, Dolby Digital Plus, HE-AAC 8 Satellite dish connection (Only satellite models) Connect the TV to a satellite dish to a satellite socket with a satellite RF cable (75 Ω). CI module connection (Depending on model) View the encrypted (pay) services in digital TV mode. yy Check if the CI module is inserted into the PCMCIA card slot in the right direction. If the module is not inserted properly, this can cause damage to the TV and the PCMCIA card slot. yy If the TV does not display any video and audio when CI+ CAM is connected, please contact to the Terrestrial/Cable/Satellite Service Operator. PC connection When connecting your PC to the HDMI input, set the HDMI input’s [Input Label] to [PC] (INPUT) (Remote control) [All Inputs] [EDIT ICON] [PC] Other connections Connect your TV to external devices. For the best picture and audio quality, connect the external device and the TV with the HDMI cable. Some separate cable is not provided. yy Supported HDMI Audio format: Dolby Digital / Dolby Digital Plus (32 kHz, 44.1 kHz, 48 kHz), DTS (44.1 kHz, 48 kHz), PCM (32 kHz, 44.1 kHz, 48 kHz, 96 kHz, 192 kHz) (Depending on model) Remote control CAUTION yy Do not mix old and new batteries, as this may damage the remote control. yy The remote control will not be included for all sales market. Make sure to point the remote control toward the remote control sensor on the TV. # (Power) Turns the TV on or off. Selects Radio, TV and DTV programme. (INPUT) Changes the input source. (Q.Settings) Accesses the Quick Settings. By zooming in on the selected area, you can view it in full screen. Recalls your preferred subtitle in digital mode. Number buttons Enters numbers. Alphabet buttons Enters letters. Accesses the saved programme list. (Space) Opens an empty space on the screen keyboard. Shows programme guide. 1 You can access apps or Live TV using the number buttons corresponding to the features. Adjusts the volume level. Views the information of the current programme and screen. (SEARCH) Search for content such as TV programmes, movies and other videos, or perform a web search by entering text in the search bar. (MUTE) Mutes all sounds. (MUTE)1 Accesses the [Accessibility] menu. Scrolls through the saved programmes. Moves to the previous or next screen. ENGLISH ENG The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully and use the TV correctly. To replace batteries, open the battery cover, replace batteries (1.5 V AAA) matching the and ends to the label inside the compartment, and close the battery cover. To remove the batteries, perform the installation actions in reverse. (Some buttons and services may not be provided depending on models or regions.) 1 To use the button, press and hold for more than 3 seconds. # 9 ENG ENGLISH # Streaming Service buttons Connects to the Video Streaming Service. (HOME) Shows the Home menu. (HOME)1 Shows the previous history. Returns to the previous level. Clears on-screen displays and returns to TV viewing. Navigation buttons (up/down/left/right) Scrolls through menus or options. Selects menus or options and confirms your input. Teletext buttons ( ) These buttons are used for teletext. 1 Provides content related to the program you are currently watching. Audio descriptions function will be enabled. Starts to record and displays record menu. (Only Time MachineReady supported model) Returns to LIVE TV. Control buttons ( ) Controls media contents. , , , These access special functions in some menus. 10 Maintenance Cleaning your TV yy Make sure to turn the power off and disconnect the power cord and all other cables first. yy When the TV is left unattended and unused for a long time, disconnect the power cord from the wall outlet to prevent possible damage from lightning or power surges. Screen, frame, cabinet and stand To remove dust or light dirt, wipe the surface with a dry, clean, and soft cloth. To remove major dirt, wipe the surface with a soft cloth dampened in clean water or a diluted mild detergent. Then wipe immediately with a dry cloth. yy Avoid touching the screen at all times, as this may result in damage to the screen. yy Do not push, rub, or hit the screen surface with your fingernail or a sharp object, as this may result in scratches and image distortions. yy Do not use any chemicals as this may damage the product. yy Do not spray liquid onto the surface. If water enters the TV, it may result in fire, electric shock, or malfunction. Power cord Remove the accumulated dust or dirt on the power cord regularly. Cannot control the TV with the remote control. yy Check the remote control sensor on the product and try again. yy Check if there is any obstacle between the product and the remote control. yy Check if the batteries are still working and properly installed ( to , to ). No image display and no sound is produced. ENGLISH ENG Clean your TV regularly to keep the best performance and to extend the product lifespan. Troubleshooting yy Check if the product is turned on. yy Check if the power cord is connected to a wall outlet. yy Check if there is a problem in the wall outlet by connecting other products. The TV turns off suddenly. yy Check the power control settings. The power supply may be interrupted. yy Check if the [Sleep Timer] / [Timer Power Off] is activated in the [Timers] settings. yy Check if the [Auto Power Off] is activated in the [General] [Eco Mode] settings. (Depending on model) yy If there is no signal while the TV is on, the TV will turn off automatically after 15 minutes of inactivity. When connecting to the PC (HDMI), [No Signal] or [Invalid Format] is displayed. yy Turn the TV off/on using the remote control. yy Reconnect the HDMI cable. yy Restart the PC with the TV on. Preventing “Image burn” or “Burn-in” on your TV screen yy If a fixed image displays on the TV screen for a long period of time, it will be imprinted and become a permanent disfigurement on the screen. This is “image burn” or “burn-in” and not covered by the warranty. yy If the aspect ratio of the TV is set to 4:3 for a long period of time, image burn may occur on the letterboxed area of the screen. yy Avoid displaying a fixed image on the TV screen for a long period of time (2 or more hours for LCD) to prevent image burn. 11 Specifications Product specifications may be changed without prior notice due to upgrade of product functions. ENG ENGLISH Models 28TK420S 24TL520S 28TL520S 24TL510S 28TL510S Dimensions (W x H x D) (mm) With stand Without stand 641.5 x 428.7 x 159.2 563.1 x 367 x 150.1 649.4 x 420 x 150.1 563.1 x 393.8 x 148.6 649.4 x 447.8 x 187.5 641.5 x 396.3 x 59.5 563.1 x 340.9 x 58 649.4 x 393.8 x 61.4 563.1 x 340.9 x 58 649.4 x 393.8 x 61.4 Weight (kg) With stand Without stand 4.6 3.3 4.55 3.6 4.95 4.5 3.25 4.5 3.25 4.5 Power consumption 28 W 25 W 28 W 25 W 28 W Power requirement 19 V 19 V 19 V 19 V 19 V 2.0 A 2.0 A 2.0 A 2.0 A 2.0 A Wireless module specification yy As band channels can vary per country, the user cannot change or adjust the operating frequency. This product is configured for the regional frequency table. yy For consideration of the user, this device should be installed and operated with a minimum distance of 20 cm between the device and the body. 0197 Wireless LAN module(LGSWFAC71) Specification Wireless LAN (IEEE 802.11a/b/g/n/ac) Frequency Range Output Power(Max.) 2400 to 2483.5 MHz 13 dBm 5150 to 5725 MHz 16.5 dBm 5725 to 5850 MHz (Not for EU) 10 dBm 0197 * "IEEE 802.11ac" is not available in all countries. 12 AC/DC Adapter CI module Size (W x H x D) Environment condition ENGLISH ENG Manufacturer: Lien Chang Model: LCAP16B-E, LCAP21C Manufacturer: Honor Model: ADS-45FSN-19 19040GPG, ADS-45SN-19-3 19040G In: AC 100 – 240 V ~ 50/60 Hz Out: DC 19 V 2.1 A 100.0 mm x 55.0 mm x 5.0 mm Operating Temperature Operating Humidity Storage Temperature Storage Humidity 0 °C to 40 °C Less than 80 % -20 °C to 60 °C Less than 85 % (Depending on country) Satellite Television system DVB-S/S2* Programme coverage 950 ~ 2150 Mhz Maximum number of storable programmes 6000 External antenna impedance Digital TV Terrestrial DVB-T DVB-T2* VHF III : 174 ~ 230 Mhz UHF IV : 470 ~ 606 Mhz UHF V : 606 ~ 862 Mhz S Band II : 230 ~ 300 Mhz S Band III : 300 ~ 470 Mhz Cable Analogue TV Terrestrial / Cable DVB-C PAL/SECAM B/G, D/K, I,SECAM L 46 ~ 890 Mhz 46 ~ 862 Mhz 2000 75 Ω * Only DVB-T2/C/S2 support models. 13 WARNING! ENG ENGLISH Never place a television set in an unstable location. A television set may fall, causing serious personal injury or death. Many injuries, particularly to children, can be avoided by taking simple precautions such as: yy Using cabinets or stands recommended by the manufacturer of the television set. yy Only using furniture that can safely support the television set. yy Ensuring the television set is not overhanging the edge of the supporting furniture. yy Not placing the television set on tall furniture (for example, cupboards or bookcases) without anchoring both the furniture and the television set to a suitable support. yy Not placing the television set on cloth or other materials that may be located between the television set and supporting furniture. yy Educating children about the dangers of climbing on furniture to reach the television set or its controls. If your existing television set is being retained and relocated, the same considerations as above should be applied. Symbols Refers to alternating current(AC). Refers to direct current(DC). Refers to class II equipment. Refers to stand-by. Refers to “ON” (power). Refers to dangerous voltage. 14 The model and serial number of the product are located on the back and on one side of the product. Record them below in case you ever need service. MODEL SERIAL No. SMART TV Quick Setup Guide * Image shown may differ from your TV. * Image shown on a PC or mobile phone may vary depending on the OS(Operating System). * App icon positions may vary on the platform, depending on the software version. Network Settings 1 Press the (Home) button on the remote to access the Home menu. Point the (Settings) icon and select by pressing the Wheel (OK) button on the remote. Picture Sound Programmes Network General Safety Accessibility WI-FI NETWORK Network / ON ꔐ WI-FI : AAA WI-FI : BBB WI-FI : CCC WI-FI : DDD WI-FI : EEE Add a hidden wireless network Connect via WPS PBC. Connect via WPS PIN. Advanced Wi-Fi Settings For wireless AP (Router) that have the symbol, you need to enter the security key. 2 Point the (All Settings) icon and select by pressing the Wheel (OK) button on the remote. 5 If the connection is successful, the "Connected to Internet" is displayed. Picture Sound Programmes NETWORK TV Name [LG] WebOS TV WEBOS3.5 Wired Connection (Ethernet) Not Connected Wi-Fi Connection Network General All Settings 3 Select the Network → Wired Connection (Ethernet) or Wi-Fi Connection. Picture Sound Programmes NETWORK Wi-Fi Connection Network General Safety You can check the status of connection in Advanced Wi-Fi settings. [LG] WebOS TV WEBOS3.5 Not Connected Not Connected Wi-Fi Direct LG Connect Apps Safety Accessibility Picture Sound Programmes Network General Safety 4 The device automatically tries to connect to the network available (wired network first). When you select the Wi-Fi Connection, the network list available is displayed. Choose the network you wish to use. Wi-Fi Direct LG Connect Apps Accessibility TV Name Wired Connection (Ethernet) Connected to Internet Accessibility WI-FI NETWORK Network / ON ꔐ WI-FI : AAA WI-FI : BBB WI-FI : CCC WI-FI : DDD WI-FI : EEE Add a hidden wireless network Connect via WPS PBC. Connect via WPS PIN. Advanced Wi-Fi Settings www.lg.com Troubleshooting Network Problems 1 Press the (Home) button on the remote to access the Home menu. Point the (Settings) icon and select by pressing the Wheel (OK) button on the remote. Check the AP (Router) or consult your Internet service provider. When X appears next to Gateway: 1 Unplug the power cord of the AP (Router) and try to connect after 5 seconds. 2 Point the (All Settings) icon and select by pressing the Wheel (OK) button on the remote. 3 Select the Network → Wired Connection (Ethernet) or Wi-Fi Connection → Advanced Wi-Fi settings. Sound Programmes NETWORK Picture TV Name Sound [LG] WebOS TV WEBOS3 Wired Connection (Ethernet) Not Connected Wi-Fi Connection Network General Not Connected Wi-Fi Direct LG Connect Apps Programmes Network General Safety Safety Accessibility Accessibility WI-FI NETWORK Network / 3 Contact internet service provider or AP (Router) company. When X appears next to DNS: All Settings Picture 2 Initialize (Reset) the AP (Router). ON ꔐ WI-FI : AAA WI-FI : BBB WI-FI : CCC WI-FI : DDD WI-FI : EEE Add a hidden wireless network Connect via WPS PBC. Connect via WPS PIN. Advanced Wi-Fi Settings Follow the instructions below that correlate to your network status. Check the TV or the AP (Router). When X appears next to TV: 1 Check the connection status of the TV, AP (Router). 2 Power off and power on the TV, AP (Router). 3 If you are using a static IP, enter the IP directly. 4 Contact internet service provider or AP (Router) company. 1 Unplug the power cord of the AP (Router) and try to connect after 5 seconds. 2 Initialize (Reset) the AP (Router). 3 Check that the MAC address of the TV/AP (Router) is registered with your Internet service provider. (The MAC address displayed on the right pane of the network status window should be registered with your Internet service provider.) 4 Check the AP (Router) manufacturer’s website to make sure your router has the latest firmware version installed. SmartShare PC SW Installing & Setting 1 Install the SmartShare PC SW programme on your PC. 2 Go to www.lg.com. Then, select your region. 3 Select SUPPORT. Then, select Drivers & Software, SOFTWARE UPDATE or Software & Firmware. 4 Search for your model. Then, select SmartShare PC SW. 5 You can run the programme when installation is complete. NOTE yy SmartShare service is only available if TV and other devices are connected via a single AP (Router). SmartShare Connection to Smartphone 1 Check that Wi-Fi is enabled on your smartphone. To use SmartShare, both devices must on the same local network. 2 Install/run the app for sharing content on your smartphone (It's called LG TV Plus on LG phones). 3 Enable your smartphone to share content files with other devices. 4 Open Device Connector application. (Home) → Device Connector → Smartphone → CONTENT SHARE. 5 Select the file type you want to play (movie, audio or photo). 6 Select a movie, music or photo file to play on the TV. 7 Play the media file to view and enjoy it on your TV. Updating the TV Firmware * If the TV is turned on for the first time after it was shipped from the factory, initialization of the TV may take a few minutes. 1 (Home) → (Settings) → CHECK FOR UPDATES (All Settings) → General → About This TV → 2 After checking the version of the software, update it. If you check the "Allow Automatic Updates", you can update the software automatically. Picture GENERAL Picture ABOUT THIS TV Sound Eco Mode Sound Software Version Programmes Network General Safety Monbile TV On SIMPLINK (HDMI-CEC) LG Wireless Keyboard Setting Help Screen Saver Reset to Initial Settings ꔐ HDMI ULTRA HD Deep Colour xx.xx.xx Allow Automatic Updates Programmes Network CHECK FOR UPDATES TV Information [LG] webOS TV WEBOS3.5 General Customer Service User Agreements Safety About This TV Accessibility General / Accessibility Legal Notice Open Source Software Notice Wi-Fi Direct Setting Picture Sound Programmes Network Wi-Fi Direct Network / REFRESH LIST ꔐ WI-FI : AAA WI-FI : BBB WI-FI : CCC WI-FI : DDD WI-FI : EEE (Home) → (Settings) → (All Settings) → Network → Wi-Fi Direct If a local network is not available, you can connect a portable device directly to the TV using Wi-Fi Direct. With SmartShare, you can share files or screens of devices connected to Wi-Fi Direct. General 1 When you open Wi-Fi Direct menu, a list of available devices appears. Safety 2 When you are prompted to request connection, select Yes. Wi-Fi Direct is now connected to your TV. Accessibility Miracast Setting Miracast allows a portable device to securely send video and sound to the TV wirelessly. (Home)/ (Input) → Screen Share 1 Miracast should be set to "ON" on your portable device. 2 When your TV is detected, select the device on your portable device. When connection is completed, the device screen appears on the TV screen. If you turn Listen Mode to ON after launching the Screen Share app, you can connect the device without starting the Screen Share app. WiDi (Wireless Display) Setting Intel’s WiDi (Wireless Display) technology enables easy and fast connection without wires or internet network for mirrored and dual monitor display on your TV. You can sit back and experience your favorite movies, videos, photos, online shows and more in full HD on your TV with great image clarity and sound. (Home)/ (Input) → Screen Share 1 Intel's WiDi is set to On. Your laptop runs the Intel WiDi programme. 2 It detects LG webOS TVs available, which supports WiDi. In the list, select the TV you want and click Connect. Enter the number shown on the screen into the input field ( ) on your laptop and then click Continue. ******** Notebook Screen 3 The laptop screen appears on the TV screen. The wireless environment may affect the screen display. If the connection is poor, the Intel WiDi connection may be lost. * LG TVs do not need to register. ******** Please call LG Customer Service if you experience any problems.
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project