LG | 28TL510S-PZ | User manual | LG 28TL510S-PZ Příručka uživatele

LG 28TL510S-PZ Příručka uživatele
OWNER’S MANUAL
Safety and Reference
(LED TV*)
* LG LED TV applies LCD screen with LED backlights.
Please read this manual carefully before operating your TV and retain it for
future reference.
28TK420S
24TL520S
28TL520S
24TL510S
28TL510S
*MFL71403301*
(1904-REV01)
Copyright
www.lg.com
2019 LG Electronics Inc. All Rights Reserved.
Table of contents
Safety precautions------------------------------3
Licenses--------------------------------------------6
ENGLISH
Open source software notice
information---------------------------------------6
Preparing------------------------------------------6
Lifting and moving the TV--------------------7
Setting up the TV--------------------------------7
Using the button--------------------------------8
Mounting on a table----------------------------9
Mounting on a wall--------------------------- 10
Connections (notifications)---------------- 11
Remote control-------------------------------- 12
Maintenance------------------------------------ 14
Troubleshooting------------------------------ 14
Specifications---------------------------------- 15
Regulatory-------------------------------------- 17
2
Safety precautions
Please read these safety precautions carefully before using the
product.
WARNING
CAUTION
If you ignore the caution message, you may be slightly injured or
the product may be damaged.
Precautions in installing the product
WARNING
yy Keep away from heat sources like electrical heaters.
►Electrical
►
shock, fire, malfunction or deformation may occur.
yy Keep the packing anti-moisture material or vinyl packing out of the
reach of children.
►Anti-moisture
►
material is harmful if swallowed. If swallowed
by mistake, force the patient to vomit and visit the nearest
hospital. Additionally, vinyl packing can cause suffocation.
Keep it out of the reach of children.
yy Do not put heavy objects on the product or sit upon it.
►If► the product collapses or is dropped, you may be injured.
Children must pay particular attention.
yy Do not leave the power or signal cable unattended on the pathway.
►The
► passerby can falter, which can cause electrical shock, fire,
product breakdown or injury.
yy Install the product in a neat and dry place.
►Dust
► or moisture can cause electrical shock, fire or product
damage.
yy If you can smell smoke or other odors or hear a strange sound
unplug the power cord and contact the service center.
►If► you continue to use without taking proper measures,
electrical shock or fire can occur.
yy If you dropped the product or the case is broken, turn off the
product and unplug the power cord.
►►If you continue to use without taking proper measures,
electrical shock or fire can occur. Contact the service center.
yy Do not drop an object on or apply impact to the product. Do not
throw any toys or objects on the product screen.
►It► can cause injury to human, problem to product and damage
the display.
ENGLISH
If you ignore the warning message, you may be seriously injured
or there is a possibility of accident or death.
yy Do not let the product fall or drop when connecting it with an
external device.
►This
► may cause injury and/or damage to the product.
yy When connecting it with a game device, keep a distance of four
times as long as the diagonal measurement of the screen from the
device.
►If► the product falls because of the short cable, this may cause
injury and/or damage to the product.
yy Leaving a fixed image on the screen for a long time may cause
damage to the screen and cause image burn-in. To use the product
for a long period of time, use a screen saver on the PC or utilize
the residual image prevention function on the product, and when
the product is not used, turn off the power. Burn-in and related
problems are not covered by the warranty on this product.
yy Do not install this product on a wall if it could be exposed to oil or
oil mist.
►This
► may damage the product and cause it to fall.
CAUTION
yy Make sure the product ventilation hole is not blocked. Install the
product in a suitably wide place (more than 100 mm from the wall).
►If► you install the product too close to the wall, it may be
deformed or fire can break out due to internal heat.
yy Do not block the ventilation hole of the product by a tablecloth or
curtain.
►The
► product can be deformed or fire can break out due to
overheating inside the product.
yy Install the product on a flat and stable place that has no risk of
dropping the product.
►If► the product is dropped, you may be injured or the product
may be broken.
yy Install the product where no EMI occurs.
yy Keep the product away from direct sunlight.
►The
► product can be damaged.
yy If you install the product in a place that does not meet the
recommended conditions, this may cause serious damage to the
product’s picture quality, life cycle and appearance. Please check
with LG or a qualified installer before installing. This caution applies
to a place where there is an abundance of fine dust or oil mist,
chemical substances are used, the temperature is very high or low,
the humidity is very high, or the product is likely to remain turned
on for a long period of time (airport and train station), failure to do
so will invalidate the warranty.
yy Do not install the product in an area with poor ventilation (e.g.on
a bookshelf, in a closet) or outside and avoid placing on cushions
or carpets.
yy In addition, do not install it where there are heating objects such as
lighting equipment.
3
Precautions to the AC adapter and
electrical power
WARNING
ENGLISH
4
yy If water or any foreign substance goes inside the product (TV,
monitor, power cord, or AC adapter), disconnect the power cord
immediately and contact the service center.
►Otherwise,
►
this may cause a fire or electric shock due to
damage to the product.
yy Do not touch the power plug or AC adapter with wet hands. If the
pins of the plug are wet or dusty, wipe and dry them before use.
►Otherwise,
►
this may cause a fire or electric shock.
yy Make sure to completely insert the power cord into the AC adapter.
►If► loosely connected, the poor connection may cause a fire or
electric shock.
yy Be sure to use power cords and AC adapters provided or approved
by LG Electronics, Inc.
►The
► use of non-approved products may cause a fire or electric
shock.
yy When unplugging the power cord, always pull it by the plug. Do not
bend the power cord with excessive force.
►The
► power line can be damaged, which may cause electric
shock or fire.
yy Be careful not to step or place heavy objects (electronic appliances,
clothing, etc.) on the power cord or AC adapter. Be careful not to
damage the power cord or AC adapter with sharp objects.
►Damaged
►
power cords may cause a fire or electric shock.
yy Never disassemble, repair or modify the power cord or AC adapter.
►This
► may cause a fire or electric shock.
yy Make sure to connect the power cable to the grounded current.
►You
► may be electrocuted or injured.
yy Use the rated voltage only.
►The
► product can be damaged, or you may be electrocuted.
yy In the presence of thunder and lightning, never touch the power
cord and signal cable because it can be very dangerous.
►It► can cause electric shock.
yy Do not connect several extension cords, electrical appliances
or electrical heaters to a single outlet. Use a power bar with a
grounding terminal designed for exclusive use with the computer.
►A► fire can break out due to overheating.
yy Do not touch the power plug with wet hands. Additionally, if the
cord pin is wet or covered with dust, dry the power plug completely
or wipe dust off.
►You
► may be electrocuted due to excess moisture.
yy If you don’t intend to use the product for a long time, unplug the
power cable from the product.
►Covering
►
dust can cause a fire, or insulation deterioration can
cause electric leakage, electric shock or fire.
yy Fix the power cable completely.
►If► the power cable is not fixed completely, a fire can break out.
yy Do not insert a conductor (like a metal chopstick) into one end
of the power cable while the other end is connected to the input
terminal on the wall. Additionally, do not touch the power cable
right after plugging into the wall input terminal.
►You
► may be electrocuted.
yy The AC Cord is the disconnecting device.
yy Please make sure the device is installed near the wall outlet to
which it is connected and that the outlet is easily accessible.
yy As long as this unit is connected to the AC wall outlet, it is not
disconnected from the AC power source even if the unit is turned
off.
CAUTION
yy Be sure to keep the outlet, AC adapter, and pins of the power plug
clean from dust and etc.
►This
► may cause a fire.
yy Do not unplug the power cord while the product is in use.
►Electrical
►
shock can damage the product.
yy Use only the power cord supplied with the unit. If you use another
power cord, make sure that it is certified by the applicable national
standards when not provided by the supplier. If the power cable is
faulty in any way, please contact the manufacturer or the nearest
authorized repair service provider for a replacement.
Precautions in moving the product
WARNING
yy Make sure to turn off the product.
►You
► may be electrocuted or the product can be damaged.
yy Make sure to remove all cables before moving the product.
►You
► may be electrocuted or the product can be damaged.
yy Make sure the panel faces forward and hold it with both hands to
move. If you drop the product, the damaged product can cause
electric shock or fire. Contact an authorized the service center for
repair.
yy Make sure the product is turned off, unplugged and all cables
have been removed. It may take 2 or more people to carry larger
apparatus. Do not press against or put stress on the front panel of
the apparatus.
CAUTION
yy Do not shock the product when moving it.
►You
► may be electrocuted or the product can be damaged.
yy Do not dispose the product-packing box. Use it when you move.
WARNING
yy Do not disassemble, repair or modify the product at your own
discretion.
►Fire
► or electric shock accident can occur.
►Contact
►
the service center for check, calibration or repair.
yy When the display is to be left unattended for an extended period of
time, unplug it from the wall outlet.
yy Keep the product away from water.
►Fire
► or electric shock accident can occur.
yy Do not shock or scratch the front and sides of the screen with
metallic objects.
►Otherwise,
►
it may cause damage to the screen.
yy Avoid high temperatures and humidity.
CAUTION
yy Do not put or store inflammable substances near the product.
►There
►
is a danger of explosion or fire due to careless handling
of the inflammable substances.
yy When cleaning the product, unplug the power cord and scrub
gently with a soft cloth to prevent scratching. Do not clean with a
wet cloth or spray water or other liquids directly onto the product.
An electric shock may occur. (Do not use chemicals such as benzene,
paint thinners or alcohol)
yy Take a rest from time to time to protect your vision.
yy Keep the product clean at all times.
yy Take a comfortable and natural position when working with a
product to relax the muscles.
yy Take a regular break when working with a product for a long time.
yy Do not press strongly upon the panel with a hand or a sharp object
such as a nail, pencil or pen, or make a scratch on it.
yy Keep the proper distance from the product.
►Your
► vision may be impaired if you look at the product too
closely.
WATER
ENGLISH
Precautions in using the product
yy Set the appropriate resolution and clock by referring to the User’s
Guide.
►Your
► vision can be impaired.
yy Use authorized detergent only when cleaning the product. (Do not
use benzene, thinner or alcohol.)
►Product
►
can be deformed.
yy Do not expose to dripping or splashing and do not place objects
filled with liquids, such as vases, cups, etc. on or over the apparatus
(e.g. on shelves above the unit).
yy Batteries should not be exposed to excessive heat. For example,
keep away from direct sunlight, open fireplace and electric heaters.
yy Do NOT place non-rechargeable batteries in charging device.
yy Using headsets (earphones) for a long time or listening loudly can
cause damage to your hearing.
yy Spray water onto a soft cloth 2 to 4 times, and use it to clean the
front frame; wipe in one direction only. Too much moisture may
cause staining.
CHEMICALS
yy Do not use products using high voltage around the Monitor. (ex.
Electrical Swatter)
►Monitor
►
may have malfunction as its electrical shock.
Mounting on a wall
yy Do NOT install this product by yourself as you may injure yourself
or cause damage to product. Please contact Service personnel
authorised by Manufacturer.
5
Licenses
Supported licenses may differ by model. For more information about
licenses, visit www.lg.com.
ENGLISH
Open source software
notice information
To obtain the source code under GPL, LGPL, MPL, and other open
source licenses, that is contained in this product, please visit
http://opensource.lge.com.
In addition to the source code, all referred license terms, warranty
disclaimers and copyright notices are available for download.
LG Electronics will also provide open source code to you on CD-ROM
for a charge covering the cost of performing such distribution (such
as the cost of media, shipping, and handling) upon email request to
opensource@lge.com.
This offer is valid for a period of three years after our last shipment
of this product. This offer is valid to anyone in receipt of this
information.
Preparing
NOTE
yy Image shown may differ from your TV.
yy Your TV’s OSD (On Screen Display) may differ slightly from that
shown in this manual.
yy The available menus and options may differ from the input source
or product model that you are using.
yy New features may be added to this TV in the future.
yy The TV can be placed in standby mode in order to reduce the power
consumption. And the TV should be turned off if it will not be
watched for some time, as this will reduce energy consumption.
yy The energy consumed during use can be significantly reduced if the
level of brightness of the picture is reduced, and this will reduce the
overall running cost.
yy The items supplied with your product may vary depending on the
model.
yy Product specifications or contents of this manual may be changed
without prior notice due to upgrade of product functions.
yy For an optimal connection, HDMI cables and USB devices should
have bezels less than 10 mm thick and 18 mm width. Use an
extension cable that supports USB 2.0 if the USB cable or USB
memory stick does not fit into your TV’s USB port.
B
B
A
A
*A <
= 10 mm
*B <
= 18 mm
yy Use a certified cable with the HDMI logo attached. If you do not use
a certified HDMI cable, the screen may not display or a connection
error may occur.
yy Recommended HDMI cable types
-- High-Speed HDMI®/™ cable
-- High-Speed HDMI®/™ cable with Ethernet
CAUTION
yy Do not use any unapproved items to ensure the safety and product
life span.
yy Any damage or injuries caused by using unapproved items are not
covered by the warranty.
6
Lifting and moving the
TV
ENGLISH
Please note the following advice to prevent the TV from being
scratched or damaged and for safe transportation regardless of its
type and size.
CAUTION
yy Avoid touching the screen at all times, as this may result in damage
to the screen.
yy When handling the TV, be careful not to damage the protruding
joystick button. (Depending on model)
yy It is recommended to move the TV in the box or packing material
that the TV originally came in.
yy Before moving or lifting the TV, disconnect the power cord and
all cables.
yy When holding the TV, the screen should face away from you to
avoid damage.
Setting up the TV
yy Hold the top and bottom of the TV frame firmly. Make sure not to
hold the transparent part, speaker, or speaker grill area.
yy When transporting the TV, do not expose the TV to jolts or
excessive vibration.
yy When transporting the TV, keep the TV upright, never turn the TV
on its side or tilt towards the left or right.
yy Do not apply excessive pressure to cause flexing/bending of frame
chassis as it may damage screen.
CAUTION
yy When attaching the stand to the TV set, place the screen facing
down on a cushioned table or flat surface to protect the screen
from scratches.
yy Do not carry the TV upside-down by holding the stand body (or
stand base) as this may cause it to fall off, resulting in damage or
injury.
yy Do not apply foreign substances (oils, lubricants, etc.) to the screw
parts when assembling the product. (Doing so may damage the
product.)
NOTE
yy Remove the stand before installing the TV on a wall mount by
performing the stand attachment in reverse. (Only TK420S/TL520S)
yy Lift up the latch at the bottom of the stand base and detach the
stand base from the TV. (Only TL510S)
7
Using the button
<TL520S/TL510S>
Power On (Press)
Power Off1 (Press and hold)
Menu Control (Press2)
Menu Selection (Press and Hold3)
You can simply operate the TV functions, using the button.
(Depending on model)
yy Image shown may differ from your TV.
ENGLISH
<TK420S>
1
2
3
All running apps will close, and any recording in progress will
stop.
You can access and adjust the menu by pressing the button when
TV is on.
You can use the function when you access menu control.
Adjusting the menu
When the TV is turned on, press the button one time. You can adjust
the menu items using the buttons. (Depending on model)
<TL520S/TL510S>
Turns the power off.
Accesses the setting menu.
Clears on-screen displays and returns to TV viewing.
Changes the input source.
Scrolls through the saved programmes.
Adjusts the volume level.
Basic functions
<TK420S>
Power On (Press)
Power Off (Press and hold1)
Volume Control
Programmes Control
1
If the menu button is on the screen, pressing and holding the
button will let you exit the menu.
NOTE
yy If you press the joystick button first, you may not be able to adjust
the volume level and saved programmes.
CAUTION
yy With your finger on the joystick button, when moving it up, down,
left or right be careful not to press the button in.
8
Mounting on a table
(This is not available for all models.)
yy Image shown may differ from your TV.
1
Using the kensington security system
yy Image shown may differ from your TV.
The Kensington security system connector is located at the rear of
the TV. For more information of installation and using, refer to the
manual provided with the Kensington security system or
visit http://www.kensington.com. Connect the Kensington security
system cable between the TV and a table.
100 mm
100 mm
100 mm
ENGLISH
Lift and tilt the TV into its upright position on a table. -- Leave a 100 mm (minimum) space from the wall for proper
ventilation.
100 mm
NOTE
2
Connect the AC-DC Adapter and power cord to a wall outlet.
CAUTION
yy The Kensington security system is optional. You can obtain
additional accessories from most electronics stores.
yy Do not place the TV near or on sources of heat, as this may result in
fire or other damage.
yy Please be sure to connect the TV to the AC/DC power adapter before
connecting the TV’s power plug to a wall power outlet.
9
Mounting on a wall
CAUTION
For proper ventilation, allow a clearance of 100 mm on each side and
from the wall. Detailed installation instructions are available from
your dealer, see the optional Tilt Wall Mounting Bracket Installation
and Setup Guide.
ENGLISH
100 mm
100 mm
100 mm
100 mm
100 mm
If you intend to mount the TV to a wall, attach Wall mounting
interface (optional parts) to the back of the TV.
When you install the TV using the wall mounting interface (optional
parts), attach it carefully so it will not drop.
1
yy Must use the enclosed screw in the box. (Depending on model)
yy Disconnect the power first, and then move or install the TV.
Otherwise electric shock may occur.
yy If you install the TV on a ceiling or slanted wall, it may fall and
result in severe injury.
yy Use an authorized LG wall mount and contact the local dealer or
qualified personnel.
yy Do not over tighten the screws as this may cause damage to the TV
and void your warranty.
yy Use the screws and wall mounts that meet the VESA standard. Any
damages or injuries by misuse or using an improper accessory are
not covered by the warranty.
yy Screw length from outer surface of back cover should be under 8
mm.
Wall mount Pad
Back Cover
If you use screw longer than standard, the TV might be damaged
internally.
If you use improper screw, the product might be damaged and
drop from mounted position. In this case, LG Electronics is not
responsible for it.
2
Wall mount Pad
Back Cover
Standard screw
: M4 x L10
Separate purchase (Wall mounting
bracket)
Model
28TK420S
28TL520S
28TL510S
24TL520S
24TL510S
Wall mount (A x B) (mm)
A
B
Standard screw
Number of screws
Wall mount bracket
(optional)
10
75 x 75
100 x 100
M4 x L10
4
RW120
Max.8 mm
NOTE
yy Use the screws that are listed on the VESA standard screw
specifications.
yy The wall mount kit includes an installation manual and necessary
parts.
yy The wall mount bracket is optional. You can obtain additional
accessories from your local dealer.
yy The length of screws may differ depending on the wall mount. Be
sure to use the proper length.
yy For more information, refer to the instructions supplied with the
wall mount.
Connections
(notifications)
NOTE
yy The external device connection may differ from the model.
yy Connect external devices to the TV regardless of the order of the
TV port.
yy If you record a TV programme on a DVD recorder or VCR, make
sure to connect the TV signal input cable to the TV through a DVD
recorder or VCR. For more information of recording, refer to the
manual provided with the connected device.
yy Refer to the external equipment’s manual for operating
instructions.
yy If you connect a gaming device to the TV, use the cable supplied
with the gaming device.
yy In PC mode, there may be noise associated with the resolution,
vertical pattern, contrast or brightness. If noise is present, change
the PC output to another resolution, change the refresh rate to
another rate or adjust the brightness and contrast on the [Picture]
menu until the picture is clear.
yy In PC mode, some resolution settings may not work properly
depending on the graphics card.
Antenna connection
(Only satellite models)
Connect the TV to a satellite dish to a satellite socket with a satellite
RF cable (75 Ω).
CI module connection
(Depending on model)
View the encrypted (pay) services in digital TV mode.
yy Check if the CI module is inserted into the PCMCIA card slot in the
right direction. If the module is not inserted properly, this can
cause damage to the TV and the PCMCIA card slot.
yy If the TV does not display any video and audio when CI+ CAM is
connected, please contact to the Terrestrial/Cable/Satellite Service
Operator.
ENGLISH
Connect various external devices to the TV and switch input modes
to select an external device. For more information about an external
device’s connection, refer to the manual supplied with each device.
Available external devices are: HD receivers, DVD players, VCRs, audio
systems, USB storage devices, PC, gaming devices, and other external
devices.
Satellite dish connection
PC connection
When connecting your PC to the HDMI input, set the HDMI input’s
[Input Label] to [PC]
(INPUT) (Remote control) [All Inputs] [EDIT ICON]
[PC]
Other connections
Connect your TV to external devices. For the best picture and audio
quality, connect the external device and the TV with the HDMI cable.
Some separate cable is not provided.
yy Supported HDMI Audio format:
Dolby Digital / Dolby Digital Plus (32 kHz, 44.1 kHz, 48 kHz), DTS
(44.1 kHz, 48 kHz), PCM (32 kHz, 44.1 kHz, 48 kHz, 96 kHz, 192
kHz) (Depending on model)
Connect the TV to a wall antenna socket with an RF cable (75 Ω)
(Not Provided).
yy Use a signal splitter to use more than 2 TVs.
yy If the image quality is poor, install a signal amplifier properly to
improve the image quality.
yy If the image quality is poor with an antenna connected, try to
realign the antenna in the correct direction.
yy An antenna cable and converter are not supplied.
yy Supported DTV Audio : MPEG, Dolby Digital, Dolby Digital Plus,
HE-AAC
11
Remote control
ENGLISH
The descriptions in this manual are based on the buttons on the
remote control. Please read this manual carefully and use the TV
correctly.
To replace batteries, open the battery cover, replace batteries (1.5
V AAA) matching the and ends to the label inside the
compartment, and close the battery cover. To remove the batteries,
perform the installation actions in reverse.
CAUTION
yy Do not mix old and new batteries, as this may damage the remote
control.
yy The remote control will not be included for all sales market.
Make sure to point the remote control toward the remote control
sensor on the TV.
#
12
#
(Some buttons and services may not be provided depending on
models or regions.)
1 To use the button, press and hold for more than 3 seconds.
(Power) Turns the TV on or off.
Selects Radio, TV and DTV programme.
(INPUT) Changes the input source.
(Q.Settings) Accesses the Quick Settings.
By zooming in on the selected area, you can view it in
full screen.
Recalls your preferred subtitle in digital mode.
Number buttons Enters numbers.
Alphabet buttons Enters letters.
Accesses the saved programme list.
(Space) Opens an empty space on the screen keyboard.
Shows programme guide.
1
You can access apps or Live TV using the number
buttons corresponding to the features.
Adjusts the volume level.
Views the information of the current programme and screen.
(SEARCH) Search for content such as TV programmes, movies
and other videos, or perform a web search by entering text in the
search bar.
(MUTE) Mutes all sounds.
(MUTE)1 Accesses the [Accessibility] menu.
Scrolls through the saved programmes.
Moves to the previous or next screen.
# Streaming Service buttons Connects to the Video Streaming
Service.
(HOME) Shows the Home menu.
(HOME)1 Shows the previous history.
Returns to the previous level.
ENGLISH
Clears on-screen displays and returns to TV viewing.
Navigation buttons (up/down/left/right) Scrolls through menus
or options.
Selects menus or options and confirms your input.
Teletext buttons (
) These buttons are used for
teletext.
1
Provides content related to the program you are
currently watching.
Audio descriptions function will be enabled.
Starts to record and displays record menu.
(Only Time MachineReady supported model)
Returns to LIVE TV.
Control buttons (
) Controls media contents.
,
,
,
These access special functions in some
menus.
13
Maintenance
Cleaning your TV
ENGLISH
Clean your TV regularly to keep the best performance and to extend
the product lifespan.
yy Make sure to turn the power off and disconnect the power cord and
all other cables first.
yy When the TV is left unattended and unused for a long time,
disconnect the power cord from the wall outlet to prevent possible
damage from lightning or power surges.
Screen, frame, cabinet and stand
To remove dust or light dirt, wipe the surface with a dry, clean, and
soft cloth.
To remove major dirt, wipe the surface with a soft cloth dampened
in clean water or a diluted mild detergent. Then wipe immediately
with a dry cloth.
yy Avoid touching the screen at all times, as this may result in damage
to the screen.
yy Do not push, rub, or hit the screen surface with your fingernail or a
sharp object, as this may result in scratches and image distortions.
yy Do not use any chemicals as this may damage the product.
yy Do not spray liquid onto the surface. If water enters the TV, it may
result in fire, electric shock, or malfunction.
Power cord
Remove the accumulated dust or dirt on the power cord regularly.
Preventing “Image burn” or “Burn-in”
on your TV screen
yy If a fixed image displays on the TV screen for a long period of time,
it will be imprinted and become a permanent disfigurement on
the screen. This is “image burn” or “burn-in” and not covered by
the warranty.
yy If the aspect ratio of the TV is set to 4:3 for a long period of time,
image burn may occur on the letterboxed area of the screen.
yy Avoid displaying a fixed image on the TV screen for a long period of
time (2 or more hours for LCD) to prevent image burn.
14
Troubleshooting
Cannot control the TV with the remote control.
yy Check the remote control sensor on the product and try again.
yy Check if there is any obstacle between the product and the remote
control.
yy Check if the batteries are still working and properly installed
( to , to ).
No image display and no sound is produced.
yy Check if the product is turned on.
yy Check if the power cord is connected to a wall outlet.
yy Check if there is a problem in the wall outlet by connecting other
products.
The TV turns off suddenly.
yy Check the power control settings. The power supply may be
interrupted.
yy Check if the auto-off function is activated on the settings related
time.
yy If there is no signal while the TV is on, the TV will turn off
automatically after 15 minutes of inactivity.
When connecting to the PC (HDMI), no signal is detected.
yy Turn the TV off/on using the remote control.
yy Reconnect the HDMI cable.
yy Restart the PC with the TV on.
Specifications
Product specifications may be changed without prior notice due to upgrade of product functions.
Models
Weight (kg)
Without stand
With stand
Without stand
Power
consumption
641.5 x 428.7 x 159.2
563.1 x 367 x 150.1
649.4 x 420 x 150.1
563.1 x 393.8 x 148.6
649.4 x 447.8 x 187.5
641.5 x 396.3 x 59.5
563.1 x 340.9 x 58
649.4 x 393.8 x 61.4
563.1 x 340.9 x 58
649.4 x 393.8 x 61.4
4.6
3.3
4.55
3.6
4.95
4.5
3.25
4.5
3.25
4.5
28 W
25 W
28 W
25 W
28 W
Power
requirement
19 V
19 V
19 V
19 V
19 V
2.0 A
2.0 A
2.0 A
2.0 A
2.0 A
ENGLISH
28TK420S
24TL520S
28TL520S
24TL510S
28TL510S
Dimensions (W x H x D) (mm)
With stand
Wireless module specification
yy As band channels can vary per country, the user cannot change or adjust the operating frequency. This product is configured for the regional
frequency table.
yy For consideration of the user, this device should be installed and operated with a minimum distance of 20 cm between the device and the
body.
0197
Wireless LAN module(LGSWFAC71) Specification
Wireless LAN (IEEE 802.11a/b/g/n/ac)
Frequency Range
Output Power(Max.)
2400 to 2483.5 MHz
13 dBm
5150 to 5725 MHz
16.5 dBm
5725 to 5850 MHz (Not for EU)
10 dBm
0197
* "IEEE 802.11ac" is not available in all countries.
15
Manufacturer: Lien Chang
Model: LCAP21C
Manufacturer: Honor
Model: ADS-45SN-19-3 19040G
In: AC 100 – 240 V ~ 50/60 Hz
Out: DC 19 V
2.1 A
AC/DC Adapter
ENGLISH
CI module Size (W x H x D)
Environment
condition
100.0 mm x 55.0 mm x 5.0 mm
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
0 °C to 40 °C
Less than 80 %
-20 °C to 60 °C
Less than 85 %
(Depending on country)
Satellite
Television system
DVB-S/S2*
Programme coverage
950 ~ 2,150 Mhz
Maximum number of
storable programmes
6,000
External antenna impedance
* Only DVB-T2/C/S2 support models.
16
Digital TV
Terrestrial
DVB-T
DVB-T2*
VHF III : 174 ~ 230 Mhz
UHF IV : 470 ~ 606 Mhz
UHF V : 606 ~ 862 Mhz
S Band II : 230 ~ 300 Mhz
S Band III : 300 ~ 470 Mhz
Cable
DVB-C
PAL/SECAM B/G, D/K,
I,SECAM L
46 ~ 890 Mhz
46 ~ 862 Mhz
2,000
75 Ω
Analogue TV
Terrestrial / Cable
Regulatory
WEEE
Information for Environmental
Preservation
We promote activities for environmental preservation, and we
specifically develop our products to embrace the concept of
environment-friendly.
We minimize the hazardous materials contained in our products. For
example, there is no cadmium to be found in our product.
Information for recycling
This product may contain parts which could be hazardous to the
environment. It is important that this product be recycled after use.
LGE. handles all waste product through an environmentally
acceptable recycling method. There are several take-back and
recycling systems currently in operation worldwide. Many parts will
be reused and recycled, while harmful substances and heavy metals
are treated by an environmentally friendly method.
If you want to find out more information about our recycling
program, please contact your local LG vendor or a corporate
representative of LG.
We set our vision and policies on a cleaner world by selecting the
issue of the global environment as a task for corporate improvement.
Please visit our website for more information about our ‘green’
policies.
http://www.lg.com/global/sustainability/environment/take-backrecycling.jsp
Disposal of your old appliance
1
2
3
This crossed-out wheeled bin symbol indicates that waste
electrical and electronic products (WEEE) should be disposed of
separately from the municipal waste stream.
Old electrical products can contain hazardous substances so
correct disposal of your old appliance will help prevent potential
negative consequences for the environment and human health.
Your old appliance may contain reusable parts that could be used
to repair other products, and other valuable materials that can
be recycled to conserve limited resources.
You can take your appliance either to the shop where you
purchased the product, or contact your local government waste
office for details of your nearest authorised WEEE collection
point. For the most up to date information for your country
please see www.lg.com/global/recycling
ENGLISH
LGE. announced the ‘LG Declaration for a Cleaner Environment’ in
1994, and this ideal has served as a guiding managerial principle
ever since. The Declaration is a foundation that has allowed us to
undertake environmentally friendly activities in careful consideration
of economic, environmental, and social aspects.
Battery
Pb
Disposal of waste batteries/accumulators
1
2
3
4
This symbol may be combined with chemical symbols for
mercury(Hg), cadmium(Cd) or lead(Pb) if the battery Contains
more that 0.0005% of mercury, 0.002% of cadmium or 0.004%
of lead.
All batteries/accumulators should be disposed separately from
the municipal waste stream via designated collection facilities
appointed by the government or the local authorities.
The correct disposal of Your old batteries/accumulators will help
to prevent potential negative consequences for the environment,
animal and human health.
For more detailed information about disposal of Your old
batteries/accumulators, please contact Your city office, waste
disposal service or the shop where You purchased the product.
(http://www.lg.com/global/sustainability/environment/takeback-recycling/global-network-europe)
17
DECLARATION OF CONFORMITY
0197
ENGLISH
[For Equipment Under Radio Equipment Directive]
Hereby, LG Electronics declares that the radio equipment type
[Monitor Television] is in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the
following internet address:
0197
http://www.lg.com/global/support/cedoc/cedoc#
LG Electronics European Shared Service Center B.V.
Krijgsman 1
1186 DM Amstelveen
The Netherlands
The use of the 5150 – 5350 MHz band is restricted to indoor use
only. This restriction exists in the countries Belgium (BE), Bulgaria
(BG), Czech Republic (CZ), Denmark (DK), Germany (DE), Estonia
(EE), Ireland (IE), Greece (EL), Spain (ES), France (FR), Croatia (HR),
Italy (IT), Cyprus (CY), Latvia (LV), Lithuania (LT), Luxembourg (LU),
Hungary (HU), Malta (MT), Netherlands (NL), Austria (AT), Poland
(PL), Portugal (PT), Romania (RO), Slovenia (SI), Slovakia (SK),
Finland (FI), Sweden (SE), United Kingdom (UK), Switzerland (CH),
Iceland (IS), Liechtenstein (LI) and Norway(NO). (For Wi-Fi/Bluetooth
built-in model or Wi-Fi built-in model)
WARNING!
Never place a television set in an unstable location. A television
set may fall, causing serious personal injury or death. Many
injuries, particularly to children, can be avoided by taking simple
precautions such as:
yy Using cabinets or stands recommended by the manufacturer of
the television set.
yy Only using furniture that can safely support the television set.
yy Ensuring the television set is not overhanging the edge of the
supporting furniture.
yy Not placing the television set on tall furniture (for example,
cupboards or bookcases) without anchoring both the furniture
and the television set to a suitable support.
yy Not placing the television set on cloth or other materials that
may be located between the television set and supporting
furniture.
yy Educating children about the dangers of climbing on furniture to
reach the television set or its controls.
If your existing television set is being retained and relocated, the
same considerations as above should be applied.
Symbols
Refers to alternating current(AC).
Refers to direct current(DC).
Refers to class II equipment.
Refers to stand-by.
Refers to “ON” (power).
Refers to dangerous voltage.
18
Service
Unplug the monitor from the wall outlet and refer servicing to
qualified service personnel when :
ENGLISH
yy The power cord or plug is damaged or frayed.
yy Liquid has been spilled into the monitor.
yy The monitor has been exposed to rain or water.
yy The monitor does not operate normally following the operating
instructions. Adjust only those controls that are covered in the
operating instructions. An improper adjustment of other controls
may result in damage and often requires extensive work by a
qualified technician to restore the monitor to normal operation.
yy The monitor has been dropped or the cabinet has been damaged.
yy The monitor exhibits a distinct change in performance.
yy Snapping or popping from the monitor is continuous or frequent
while the monitor is operating. It is normal for some monitors to
make occasional sounds when being turned on or off, or when
changing video modes.
Do not attempt to service the monitor yourself, as opening or
removing covers may expose you to dangerous voltage or other
hazards. Refer all servicing to qualified service personnel.
19
The model and serial number of the product are
located on the back and on one side of the product.
Record them below in case you ever need service.
Model
Serial No.
SMART TV Quick Setup Guide
* Image shown may differ from your TV.
* Image shown on a PC or mobile phone may vary depending on the OS(Operating System).
* App icon positions may vary on the platform, depending on the software version.
Network Settings
1 Press the
(Home) button on the remote to
access the Home menu. Point the
(Settings)
icon and select by pressing the Wheel (OK)
button on the remote.
WI-FI NETWORK
Picture
Network /
Sound
ꔐ WI-FI : AAA
WI-FI : BBB
WI-FI : CCC
Programmes
Network
General
Safety
Accessibility
ON
WI-FI : DDD
WI-FI : EEE
Add a hidden wireless network
Connect via WPS PBC.
Connect via WPS PIN.
Advanced Wi-Fi Settings
For wireless AP (Router) that have the
symbol, you need to enter the security key.
2 Point the
(All Settings) icon and select
by pressing the Wheel (OK) button on the
remote.
5 If the connection is successful, the "Connected
to Internet" is displayed.
Picture
Sound
Programmes
NETWORK
TV Name
[LG] WebOS TV WEBOS3.5
Wired Connection (Ethernet)
Not Connected
Wi-Fi Connection
Network
General
All Settings
3 Select the Network → Wired Connection
(Ethernet) or Wi-Fi Connection.
Picture
Sound
Programmes
NETWORK
Wired Connection (Ethernet)
Wi-Fi Connection
Network
General
Safety
You can check the status of connection in
Advanced Wi-Fi settings.
TV Name
Not Connected
Wi-Fi Direct
LG Connect Apps
Safety
Accessibility
WI-FI NETWORK
Picture
Network /
Sound
ꔐ WI-FI : AAA
WI-FI : BBB
WI-FI : CCC
Programmes
Network
General
Safety
4 The device automatically tries to connect to the
network available (wired network first).
When you select the Wi-Fi Connection, the
network list available is displayed. Choose the
network you wish to use.
Wi-Fi Direct
LG Connect Apps
Accessibility
[LG] WebOS TV WEBOS3.5
Not Connected
Connected to Internet
Accessibility
ON
WI-FI : DDD
WI-FI : EEE
Add a hidden wireless network
Connect via WPS PBC.
Connect via WPS PIN.
Advanced Wi-Fi Settings
www.lg.com
Troubleshooting Network Problems
1 Press the
(Home) button on the remote to
access the Home menu. Point the
(Settings)
icon and select by pressing the Wheel (OK)
button on the remote.
Check the AP (Router) or consult your Internet
service provider.
When X appears next to Gateway:
1 Unplug the power cord of the AP (Router) and
try to connect after 5 seconds.
2 Point the
(All Settings) icon and select
by pressing the Wheel (OK) button on the
remote.
3 Select the Network → Wired Connection
(Ethernet) or Wi-Fi Connection → Advanced
Wi-Fi settings.
Sound
Programmes
NETWORK
Picture
TV Name
Sound
[LG] WebOS TV WEBOS3
Wired Connection (Ethernet)
Not Connected
Wi-Fi Connection
Network
General
Not Connected
Wi-Fi Direct
LG Connect Apps

Programmes
Network
General
Safety
Safety
Accessibility
Accessibility
WI-FI NETWORK
Network /
3 Contact internet service provider or AP (Router)
company.
When X appears next to DNS:
All Settings
Picture
2 Initialize (Reset) the AP (Router).
ON
ꔐ WI-FI : AAA
WI-FI : BBB
WI-FI : CCC
WI-FI : DDD
WI-FI : EEE
Add a hidden wireless network
Connect via WPS PBC.
Connect via WPS PIN.
Advanced Wi-Fi Settings
Follow the instructions below that correlate to your
network status.
Check the TV or the AP (Router).
When X appears next to TV:
1 Check the connection status of the TV, AP
(Router).
2 Power off and power on the TV, AP (Router).
3 If you are using a static IP, enter the IP directly.
4 Contact internet service provider or AP (Router)
company.
1 Unplug the power cord of the AP (Router) and
try to connect after 5 seconds.
2 Initialize (Reset) the AP (Router).
3 Check that the MAC address of the TV/AP (Router)
is registered with your Internet service provider.
(The MAC address displayed on the right
pane of the network status window should be
registered with your Internet service provider.)
4 Check the AP (Router) manufacturer’s website
to make sure your router has the latest firmware
version installed.
SmartShare PC SW Installing & Setting
1 Install the SmartShare PC SW programme on your PC.
2 Go to www.lg.com. Then, select your region.
3 Select SUPPORT. Then, select Drivers & Software, SOFTWARE UPDATE or Software & Firmware.
4 Search for your model. Then, select SmartShare PC SW.
5 You can run the programme when installation is complete.
NOTE
yy SmartShare service is only available if TV and other devices are connected via a single AP (Router).
SmartShare Connection to Smartphone
1 Check that Wi-Fi is enabled on your smartphone. To use SmartShare, both devices must
on the same local network.
2 Install/run the app for sharing content on your smartphone (It's called LG TV Plus on LG
phones).
3 Enable your smartphone to share content files with other devices.
4 Open Device Connector application.
(Home) → Device Connector → Smartphone → CONTENT SHARE.
5 Select the file type you want to play (movie, audio or photo).
6 Select a movie, music or photo file to play on the TV.
7 Play the media file to view and enjoy it on your TV.
Updating the TV Firmware
* If the TV is turned on for the first time after it was shipped from the factory, initialization of the TV may
take a few minutes.
1
(Home) →
(Settings) →
CHECK FOR UPDATES
(All Settings) →
General → About This TV →
2 After checking the version of the software, update it.
If you check the "Allow Automatic Updates", you can update the software automatically.
Picture
GENERAL
Picture
ABOUT THIS TV
Sound
Eco Mode
Sound
Software Version
Programmes
Network
General
Safety
Monbile TV On
SIMPLINK (HDMI-CEC)
LG Wireless Keyboard
Setting Help
Screen Saver
Reset to Initial Settings

ꔐ
HDMI ULTRA HD Deep Colour
xx.xx.xx
Allow Automatic Updates
Programmes
Network
CHECK FOR UPDATES
TV Information
[LG] webOS TV WEBOS3.5
General
Customer Service
User Agreements
Safety
About This TV
Accessibility
General /
Accessibility
Legal Notice
Open Source Software Notice
Wi-Fi Direct Setting
Picture
Sound
Programmes
Network
Wi-Fi Direct
Network /
REFRESH LIST
ꔐ WI-FI : AAA
WI-FI : BBB
WI-FI : CCC
WI-FI : DDD
WI-FI : EEE
(Home) →
(Settings) →
(All Settings) →
Network → Wi-Fi Direct
If a local network is not available, you can connect a portable device directly to the
TV using Wi-Fi Direct.
With SmartShare, you can share files or screens of devices connected to Wi-Fi
Direct.
General
1 When you open Wi-Fi Direct menu, a list of available devices appears.
Safety
2 When you are prompted to request connection, select Yes. Wi-Fi Direct is now
connected to your TV.
Accessibility
Miracast Setting
Miracast allows a portable device to securely send video and sound to the TV wirelessly.
(Home)/
(Input) →
Screen Share
1 Miracast should be set to "ON" on your portable device.
2 When your TV is detected, select the device on your portable device.
When connection is completed, the device screen appears on the TV screen.
If you turn Listen Mode to ON after launching the Screen Share app, you can connect the
device without starting the Screen Share app.
WiDi (Wireless Display) Setting
Intel’s WiDi (Wireless Display) technology enables easy and fast connection without wires or internet
network for mirrored and dual monitor display on your TV. You can sit back and experience your favorite
movies, videos, photos, online shows and more in full HD on your TV with great image clarity and sound.
(Home)/
(Input) →
Screen Share
1 Intel's WiDi is set to On. Your laptop runs the Intel WiDi programme.
2 It detects LG webOS TVs available, which supports WiDi. In the list, select the TV you want and click
Connect. Enter the number shown on the screen into the input field ( ) on your laptop and then click
Continue.
********

Notebook Screen
3 The laptop screen appears on the TV screen. The wireless environment may affect the screen display.
If the connection is poor, the Intel WiDi connection may be lost.
* LG TVs do not need
to register.
********
Please call LG Customer Service if you experience any problems.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising